diff options
Diffstat (limited to 'drivers/ata/pata_netcell.c')
| -rw-r--r-- | drivers/ata/pata_netcell.c | 174 |
1 files changed, 174 insertions, 0 deletions
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c new file mode 100644 index 00000000000..76eb9c90bee --- /dev/null +++ b/drivers/ata/pata_netcell.c @@ -0,0 +1,174 @@ +/* + * pata_netcell.c - Netcell PATA driver + * + * (c) 2006 Red Hat <alan@redhat.com> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/blkdev.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <scsi/scsi_host.h> +#include <linux/libata.h> +#include <linux/ata.h> + +#define DRV_NAME "pata_netcell" +#define DRV_VERSION "0.1.5" + +/** + * netcell_probe_init - check for 40/80 pin + * @ap: Port + * + * Cables are handled by the RAID controller. Report 80 pin. + */ + +static int netcell_pre_reset(struct ata_port *ap) +{ + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * netcell_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void netcell_error_handler(struct ata_port *ap) +{ + return ata_bmdma_drive_eh(ap, netcell_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/* No PIO or DMA methods needed for this device */ + +static struct scsi_host_template netcell_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + /* Special handling needed if you have sector or LBA48 limits */ + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + /* Use standard CHS mapping rules */ + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations netcell_ops = { + .port_disable = ata_port_disable, + + /* Task file is PCI ATA format, use helpers */ + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = netcell_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + /* BMDMA handling is PCI ATA format, use helpers */ + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + /* IRQ-related hooks */ + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + /* Generic PATA PCI ATA helpers */ + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * netcell_init_one - Register Netcell ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in netcell_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &netcell_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + /* Actually we don't really care about these as the + firmware deals with it */ + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* UDMA 133 */ + .port_ops = &netcell_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + /* Any chip specific setup/optimisation/messages here */ + ata_pci_clear_simplex(pdev); + + /* And let the library code do the work */ + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id netcell_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NETCELL, PCI_DEVICE_ID_REVOLUTION), }, + { } /* terminate list */ +}; + +static struct pci_driver netcell_pci_driver = { + .name = DRV_NAME, + .id_table = netcell_pci_tbl, + .probe = netcell_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init netcell_init(void) +{ + return pci_register_driver(&netcell_pci_driver); +} + +static void __exit netcell_exit(void) +{ + pci_unregister_driver(&netcell_pci_driver); +} + +module_init(netcell_init); +module_exit(netcell_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, netcell_pci_tbl); +MODULE_VERSION(DRV_VERSION); + |