diff options
Diffstat (limited to 'drivers/ata/pata_legacy.c')
-rw-r--r-- | drivers/ata/pata_legacy.c | 129 |
1 files changed, 42 insertions, 87 deletions
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c index d960f8e9e8b..35aca7d1a3e 100644 --- a/drivers/ata/pata_legacy.c +++ b/drivers/ata/pata_legacy.c @@ -79,15 +79,6 @@ static int all; module_param(all, int, 0444); MODULE_PARM_DESC(all, "Grab all legacy port devices, even if PCI(0=off, 1=on)"); -struct legacy_data { - unsigned long timing; - u8 clock[2]; - u8 last; - int fast; - struct platform_device *platform_dev; - -}; - enum controller { BIOS = 0, SNOOP = 1, @@ -104,6 +95,14 @@ enum controller { UNKNOWN = -1 }; +struct legacy_data { + unsigned long timing; + u8 clock[2]; + u8 last; + int fast; + enum controller type; + struct platform_device *platform_dev; +}; struct legacy_probe { unsigned char *name; @@ -137,11 +136,17 @@ static int ht6560a; /* HT 6560A on primary 1, second 2, both 3 */ static int ht6560b; /* HT 6560A on primary 1, second 2, both 3 */ static int opti82c611a; /* Opti82c611A on primary 1, sec 2, both 3 */ static int opti82c46x; /* Opti 82c465MV present(pri/sec autodetect) */ -static int qdi; /* Set to probe QDI controllers */ static int autospeed; /* Chip present which snoops speed changes */ static int pio_mask = ATA_PIO4; /* PIO range for autospeed devices */ static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */ +/* Set to probe QDI controllers */ +#ifdef CONFIG_PATA_QDI_MODULE +static int qdi = 1; +#else +static int qdi; +#endif + #ifdef CONFIG_PATA_WINBOND_VLB_MODULE static int winbond = 1; /* Set to probe Winbond controllers, give I/O port if non standard */ @@ -631,40 +636,20 @@ static struct ata_port_operations opti82c46x_port_ops = { .qc_issue = opti82c46x_qc_issue, }; -static void qdi6500_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); - - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - - ld_qdi->clock[adev->devno] = timing; - - outb(timing, ld_qdi->timing); -} - /** - * qdi6580dp_set_piomode - PIO setup for dual channel + * qdi65x0_set_piomode - PIO setup for QDI65x0 * @ap: Port * @adev: Device * + * In single channel mode the 6580 has one clock per device and we can + * avoid the requirement to clock switch. We also have to load the timing + * into the right clock according to whether we are master or slave. + * * In dual channel mode the 6580 has one clock per channel and we have * to software clockswitch in qc_issue. */ -static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) +static void qdi65x0_set_piomode(struct ata_port *ap, struct ata_device *adev) { struct ata_timing t; struct legacy_data *ld_qdi = ap->host->private_data; @@ -682,47 +667,15 @@ static void qdi6580dp_set_piomode(struct ata_port *ap, struct ata_device *adev) recovery = 15 - clamp_val(t.recover, 0, 15); } timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * ap->port_no); - /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) - outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); -} - -/** - * qdi6580_set_piomode - PIO setup for single channel - * @ap: Port - * @adev: Device - * - * In single channel mode the 6580 has one clock per device and we can - * avoid the requirement to clock switch. We also have to load the timing - * into the right clock according to whether we are master or slave. - */ - -static void qdi6580_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct ata_timing t; - struct legacy_data *ld_qdi = ap->host->private_data; - int active, recovery; - u8 timing; - - /* Get the timing data in cycles */ - ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000); + if (ld_qdi->type == QDI6580) + outb(timing, ld_qdi->timing + 2 * adev->devno); + else + outb(timing, ld_qdi->timing + 2 * ap->port_no); - if (ld_qdi->fast) { - active = 8 - clamp_val(t.active, 1, 8); - recovery = 18 - clamp_val(t.recover, 3, 18); - } else { - active = 9 - clamp_val(t.active, 2, 9); - recovery = 15 - clamp_val(t.recover, 0, 15); - } - timing = (recovery << 4) | active | 0x08; - ld_qdi->clock[adev->devno] = timing; - outb(timing, ld_qdi->timing + 2 * adev->devno); /* Clear the FIFO */ - if (adev->class != ATA_DEV_ATA) + if (ld_qdi->type != QDI6500 && adev->class != ATA_DEV_ATA) outb(0x5F, (ld_qdi->timing & 0xFFF0) + 3); } @@ -789,20 +742,20 @@ static int qdi_port(struct platform_device *dev, static struct ata_port_operations qdi6500_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6500_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580_set_piomode, + .set_piomode = qdi65x0_set_piomode, .sff_data_xfer = vlb32_data_xfer, }; static struct ata_port_operations qdi6580dp_port_ops = { .inherits = &legacy_base_port_ops, - .set_piomode = qdi6580dp_set_piomode, + .set_piomode = qdi65x0_set_piomode, .qc_issue = qdi_qc_issue, .sff_data_xfer = vlb32_data_xfer, }; @@ -879,29 +832,29 @@ static struct ata_port_operations winbond_port_ops = { }; static struct legacy_controller controllers[] = { - {"BIOS", &legacy_port_ops, 0x1F, + {"BIOS", &legacy_port_ops, ATA_PIO4, ATA_FLAG_NO_IORDY, 0, NULL }, - {"Snooping", &simple_port_ops, 0x1F, + {"Snooping", &simple_port_ops, ATA_PIO4, 0, 0, NULL }, - {"PDC20230", &pdc20230_port_ops, 0x7, + {"PDC20230", &pdc20230_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, NULL }, - {"HT6560A", &ht6560a_port_ops, 0x07, + {"HT6560A", &ht6560a_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, 0, NULL }, - {"HT6560B", &ht6560b_port_ops, 0x1F, + {"HT6560B", &ht6560b_port_ops, ATA_PIO4, ATA_FLAG_NO_IORDY, 0, NULL }, - {"OPTI82C611A", &opti82c611a_port_ops, 0x0F, + {"OPTI82C611A", &opti82c611a_port_ops, ATA_PIO3, 0, 0, NULL }, - {"OPTI82C46X", &opti82c46x_port_ops, 0x0F, + {"OPTI82C46X", &opti82c46x_port_ops, ATA_PIO3, 0, 0, NULL }, - {"QDI6500", &qdi6500_port_ops, 0x07, + {"QDI6500", &qdi6500_port_ops, ATA_PIO2, ATA_FLAG_NO_IORDY, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"QDI6580", &qdi6580_port_ops, 0x1F, + {"QDI6580", &qdi6580_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"QDI6580DP", &qdi6580dp_port_ops, 0x1F, + {"QDI6580DP", &qdi6580dp_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, qdi_port }, - {"W83759A", &winbond_port_ops, 0x1F, + {"W83759A", &winbond_port_ops, ATA_PIO4, 0, ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE, winbond_port } }; @@ -1022,6 +975,7 @@ static __init int legacy_init_one(struct legacy_probe *probe) ctrl_addr = devm_ioport_map(&pdev->dev, io + 0x0206, 1); if (!io_addr || !ctrl_addr) goto fail; + ld->type = probe->type; if (controller->setup) if (controller->setup(pdev, probe, ld) < 0) goto fail; @@ -1306,6 +1260,7 @@ MODULE_AUTHOR("Alan Cox"); MODULE_DESCRIPTION("low-level driver for legacy ATA"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("pata_qdi"); MODULE_ALIAS("pata_winbond"); module_param(probe_all, int, 0); |