diff options
Diffstat (limited to 'drivers/ata/libata-sff.c')
| -rw-r--r-- | drivers/ata/libata-sff.c | 138 |
1 files changed, 114 insertions, 24 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index bef7571a1d4..c29f1468e16 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2315,13 +2315,13 @@ int ata_pci_sff_init_host(struct ata_host *host) EXPORT_SYMBOL_GPL(ata_pci_sff_init_host); /** - * ata_pci_sff_prepare_host - helper to prepare native PCI ATA host + * ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host * @pdev: target PCI device * @ppi: array of port_info, must be enough for two ports * @r_host: out argument for the initialized ATA host * - * Helper to allocate ATA host for @pdev, acquire all native PCI - * resources and initialize it accordingly in one go. + * Helper to allocate PIO-only SFF ATA host for @pdev, acquire + * all PCI resources and initialize it accordingly in one go. * * LOCKING: * Inherited from calling layer (may sleep). @@ -2351,9 +2351,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev, if (rc) goto err_out; - /* init DMA related stuff */ - ata_pci_bmdma_init(host); - devres_remove_group(&pdev->dev, NULL); *r_host = host; return 0; @@ -2458,8 +2455,21 @@ out: } EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); +static const struct ata_port_info *ata_sff_find_valid_pi( + const struct ata_port_info * const *ppi) +{ + int i; + + /* look up the first valid port_info */ + for (i = 0; i < 2 && ppi[i]; i++) + if (ppi[i]->port_ops != &ata_dummy_port_ops) + return ppi[i]; + + return NULL; +} + /** - * ata_pci_sff_init_one - Initialize/register PCI IDE host controller + * ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller * @pdev: Controller to be initialized * @ppi: array of port_info, must be enough for two ports * @sht: scsi_host_template to use when registering the host @@ -2468,11 +2478,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host); * * This is a helper function which can be called from a driver's * xxx_init_one() probe function if the hardware uses traditional - * IDE taskfile registers. - * - * This function calls pci_enable_device(), reserves its register - * regions, sets the dma mask, enables bus master mode, and calls - * ata_device_add() + * IDE taskfile registers and is PIO only. * * ASSUMPTION: * Nobody makes a single channel controller that appears solely as @@ -2489,20 +2495,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, struct scsi_host_template *sht, void *host_priv, int hflag) { struct device *dev = &pdev->dev; - const struct ata_port_info *pi = NULL; + const struct ata_port_info *pi; struct ata_host *host = NULL; - int i, rc; + int rc; DPRINTK("ENTER\n"); - /* look up the first valid port_info */ - for (i = 0; i < 2 && ppi[i]; i++) { - if (ppi[i]->port_ops != &ata_dummy_port_ops) { - pi = ppi[i]; - break; - } - } - + pi = ata_sff_find_valid_pi(ppi); if (!pi) { dev_printk(KERN_ERR, &pdev->dev, "no valid port_info specified\n"); @@ -2523,8 +2522,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev, host->private_data = host_priv; host->flags |= hflag; - pci_set_master(pdev); - rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); + rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht); out: if (rc == 0) devres_remove_group(&pdev->dev, NULL); @@ -3196,6 +3194,98 @@ void ata_pci_bmdma_init(struct ata_host *host) } EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); +/** + * ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host + * @pdev: target PCI device + * @ppi: array of port_info, must be enough for two ports + * @r_host: out argument for the initialized ATA host + * + * Helper to allocate BMDMA ATA host for @pdev, acquire all PCI + * resources and initialize it accordingly in one go. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_bmdma_prepare_host(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct ata_host **r_host) +{ + int rc; + + rc = ata_pci_sff_prepare_host(pdev, ppi, r_host); + if (rc) + return rc; + + ata_pci_bmdma_init(*r_host); + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host); + +/** + * ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller + * @pdev: Controller to be initialized + * @ppi: array of port_info, must be enough for two ports + * @sht: scsi_host_template to use when registering the host + * @host_priv: host private_data + * @hflags: host flags + * + * This function is similar to ata_pci_sff_init_one() but also + * takes care of BMDMA initialization. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, negative on errno-based value on error. + */ +int ata_pci_bmdma_init_one(struct pci_dev *pdev, + const struct ata_port_info * const * ppi, + struct scsi_host_template *sht, void *host_priv, + int hflags) +{ + struct device *dev = &pdev->dev; + const struct ata_port_info *pi; + struct ata_host *host = NULL; + int rc; + + DPRINTK("ENTER\n"); + + pi = ata_sff_find_valid_pi(ppi); + if (!pi) { + dev_printk(KERN_ERR, &pdev->dev, + "no valid port_info specified\n"); + return -EINVAL; + } + + if (!devres_open_group(dev, NULL, GFP_KERNEL)) + return -ENOMEM; + + rc = pcim_enable_device(pdev); + if (rc) + goto out; + + /* prepare and activate BMDMA host */ + rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host); + if (rc) + goto out; + host->private_data = host_priv; + host->flags |= hflags; + + pci_set_master(pdev); + rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht); + out: + if (rc == 0) + devres_remove_group(&pdev->dev, NULL); + else + devres_release_group(&pdev->dev, NULL); + + return rc; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one); + #endif /* CONFIG_PCI */ /** |