diff options
Diffstat (limited to 'drivers/acpi')
32 files changed, 528 insertions, 327 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 74641151880..08e0140920e 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -104,6 +104,24 @@ config ACPI_SYSFS_POWER help Say N to disable power /sys interface +config ACPI_EC_DEBUGFS + tristate "EC read/write access through /sys/kernel/debug/ec" + default n + help + Say N to disable Embedded Controller /sys/kernel/debug interface + + Be aware that using this interface can confuse your Embedded + Controller in a way that a normal reboot is not enough. You then + have to power of your system, and remove the laptop battery for + some seconds. + An Embedded Controller typically is available on laptops and reads + sensor values like battery state and temperature. + The kernel accesses the EC through ACPI parsed code provided by BIOS + tables. This option allows to access the EC directly without ACPI + code being involved. + Thus this option is a debug option that helps to write ACPI drivers + and can be used to identify ACPI code or EC firmware bugs. + config ACPI_PROC_EVENT bool "Deprecated /proc/acpi/event support" depends on PROC_FS diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index 6ee33169e1d..833b582d176 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_ACPI_SBS) += sbshc.o obj-$(CONFIG_ACPI_SBS) += sbs.o obj-$(CONFIG_ACPI_POWER_METER) += power_meter.o obj-$(CONFIG_ACPI_HED) += hed.o +obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o # processor has its own "processor." module_param namespace processor-y := processor_driver.o processor_throttling.o diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c index d269a8f3329..b76848c80be 100644 --- a/drivers/acpi/acpi_pad.c +++ b/drivers/acpi/acpi_pad.c @@ -46,6 +46,8 @@ static unsigned long power_saving_mwait_eax; static unsigned char tsc_detected_unstable; static unsigned char tsc_marked_unstable; +static unsigned char lapic_detected_unstable; +static unsigned char lapic_marked_unstable; static void power_saving_mwait_init(void) { @@ -75,10 +77,7 @@ static void power_saving_mwait_init(void) power_saving_mwait_eax = (highest_cstate << MWAIT_SUBSTATE_SIZE) | (highest_subcstate - 1); - for_each_online_cpu(i) - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &i); - -#if defined(CONFIG_GENERIC_TIME) && defined(CONFIG_X86) +#if defined(CONFIG_X86) switch (boot_cpu_data.x86_vendor) { case X86_VENDOR_AMD: case X86_VENDOR_INTEL: @@ -86,13 +85,15 @@ static void power_saving_mwait_init(void) * AMD Fam10h TSC will tick in all * C/P/S0/S1 states when this bit is set. */ - if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) - return; - - /*FALL THROUGH*/ + if (!boot_cpu_has(X86_FEATURE_NONSTOP_TSC)) + tsc_detected_unstable = 1; + if (!boot_cpu_has(X86_FEATURE_ARAT)) + lapic_detected_unstable = 1; + break; default: - /* TSC could halt in idle */ + /* TSC & LAPIC could halt in idle */ tsc_detected_unstable = 1; + lapic_detected_unstable = 1; } #endif } @@ -180,10 +181,20 @@ static int power_saving_thread(void *data) mark_tsc_unstable("TSC halts in idle"); tsc_marked_unstable = 1; } + if (lapic_detected_unstable && !lapic_marked_unstable) { + int i; + /* LAPIC could halt in idle, so notify users */ + for_each_online_cpu(i) + clockevents_notify( + CLOCK_EVT_NOTIFY_BROADCAST_ON, + &i); + lapic_marked_unstable = 1; + } local_irq_disable(); cpu = smp_processor_id(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, - &cpu); + if (lapic_marked_unstable) + clockevents_notify( + CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu); stop_critical_timings(); __monitor((void *)¤t_thread_info()->flags, 0, 0); @@ -192,8 +203,9 @@ static int power_saving_thread(void *data) __mwait(power_saving_mwait_eax, 1); start_critical_timings(); - clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, - &cpu); + if (lapic_marked_unstable) + clockevents_notify( + CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu); local_irq_enable(); if (jiffies > expire_time) { diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index 33181ad350d..b17d8de9f6f 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -119,6 +119,10 @@ #define ACPI_MAX_LOOP_ITERATIONS 0xFFFF +/* Maximum sleep allowed via Sleep() operator */ + +#define ACPI_MAX_SLEEP 20000 /* Two seconds */ + /****************************************************************************** * * ACPI Specification constants (Do not change unless the specification changes) diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h index 64d1e5c2d4a..c3f43daa8be 100644 --- a/drivers/acpi/acpica/acevents.h +++ b/drivers/acpi/acpica/acevents.h @@ -80,10 +80,6 @@ u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list); acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info); -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info); - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); - struct acpi_gpe_event_info *acpi_ev_get_gpe_event_info(acpi_handle gpe_device, u32 gpe_number); diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h index 9070f1fe8f1..899d68afc3c 100644 --- a/drivers/acpi/acpica/acglobal.h +++ b/drivers/acpi/acpica/acglobal.h @@ -125,6 +125,14 @@ u8 ACPI_INIT_GLOBAL(acpi_gbl_enable_aml_debug_object, FALSE); */ u8 ACPI_INIT_GLOBAL(acpi_gbl_copy_dsdt_locally, FALSE); +/* + * Optionally truncate I/O addresses to 16 bits. Provides compatibility + * with other ACPI implementations. NOTE: During ACPICA initialization, + * this value is set to TRUE if any Windows OSI strings have been + * requested by the BIOS. + */ +u8 ACPI_INIT_GLOBAL(acpi_gbl_truncate_io_addresses, FALSE); + /* acpi_gbl_FADT is a local copy of the FADT, converted to a common format. */ struct acpi_table_fadt acpi_gbl_FADT; diff --git a/drivers/acpi/acpica/achware.h b/drivers/acpi/acpica/achware.h index 5900f135dc6..32391588e16 100644 --- a/drivers/acpi/acpica/achware.h +++ b/drivers/acpi/acpica/achware.h @@ -90,7 +90,11 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width); /* * hwgpe - GPE support */ -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info); +u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, + struct acpi_gpe_register_info *gpe_register_info); + +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action); acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info *gpe_event_info); diff --git a/drivers/acpi/acpica/evgpe.c b/drivers/acpi/acpica/evgpe.c index a221ad40416..7c2c336006a 100644 --- a/drivers/acpi/acpica/evgpe.c +++ b/drivers/acpi/acpica/evgpe.c @@ -69,7 +69,7 @@ acpi_status acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) { struct acpi_gpe_register_info *gpe_register_info; - u8 register_bit; + u32 register_bit; ACPI_FUNCTION_TRACE(ev_update_gpe_enable_masks); @@ -78,9 +78,8 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_NOT_EXIST); } - register_bit = (u8) - (1 << - (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number)); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* Clear the wake/run bits up front */ @@ -100,106 +99,6 @@ acpi_ev_update_gpe_enable_masks(struct acpi_gpe_event_info *gpe_event_info) return_ACPI_STATUS(AE_OK); } -/******************************************************************************* - * - * FUNCTION: acpi_ev_enable_gpe - * - * PARAMETERS: gpe_event_info - GPE to enable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-enable a GPE. Always enables the GPE, regardless - * of type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - - ACPI_FUNCTION_TRACE(ev_enable_gpe); - - - /* - * We will only allow a GPE to be enabled if it has either an - * associated method (_Lxx/_Exx) or a handler. Otherwise, the - * GPE will be immediately disabled by acpi_ev_gpe_dispatch the - * first time it fires. - */ - if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { - return_ACPI_STATUS(AE_NO_HANDLER); - } - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Clear the GPE (of stale events) */ - - status = acpi_hw_clear_gpe(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* Enable the requested GPE */ - - status = acpi_hw_write_gpe_enable_reg(gpe_event_info); - return_ACPI_STATUS(status); -} - -/******************************************************************************* - * - * FUNCTION: acpi_ev_disable_gpe - * - * PARAMETERS: gpe_event_info - GPE to disable - * - * RETURN: Status - * - * DESCRIPTION: Hardware-disable a GPE. Always disables the requested GPE, - * regardless of the type or number of references. - * - * Note: The GPE lock should be already acquired when this function is called. - * - ******************************************************************************/ - -acpi_status acpi_ev_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) -{ - acpi_status status; - - ACPI_FUNCTION_TRACE(ev_disable_gpe); - - - /* - * Note: Always disable the GPE, even if we think that that it is already - * disabled. It is possible that the AML or some other code has enabled - * the GPE behind our back. - */ - - /* Ensure the HW enable masks are current */ - - status = acpi_ev_update_gpe_enable_masks(gpe_event_info); - if (ACPI_FAILURE(status)) { - return_ACPI_STATUS(status); - } - - /* - * Always H/W disable this GPE, even if we don't know the GPE type. - * Simply clear the enable bit for this particular GPE, but do not - * write out the current GPE enable mask since this may inadvertently - * enable GPEs too early. An example is a rogue GPE that has arrived - * during ACPICA initialization - possibly because AML or other code - * has enabled the GPE. - */ - status = acpi_hw_low_disable_gpe(gpe_event_info); - return_ACPI_STATUS(status); -} - /******************************************************************************* * @@ -451,10 +350,6 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context) return_VOID; } - /* Update the GPE register masks for return to enabled state */ - - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); - /* * Take a snapshot of the GPE info for this level - we copy the info to * prevent a race condition with remove_handler/remove_block. @@ -607,7 +502,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE, so it doesn't keep firing before the method has a * chance to run (it runs asynchronously with interrupts enabled). */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", @@ -644,7 +539,7 @@ acpi_ev_gpe_dispatch(struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number) * Disable the GPE. The GPE will remain disabled a handler * is installed or ACPICA is restarted. */ - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); if (ACPI_FAILURE(status)) { ACPI_EXCEPTION((AE_INFO, status, "Unable to disable GPE[0x%2X]", diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c index 7c28f2d9fd3..341a38ce8aa 100644 --- a/drivers/acpi/acpica/evgpeblk.c +++ b/drivers/acpi/acpica/evgpeblk.c @@ -500,6 +500,19 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j; gpe_event_info = &gpe_block->event_info[gpe_index]; + gpe_number = gpe_index + gpe_block->block_base_number; + + /* + * If the GPE has already been enabled for runtime + * signaling, make sure it remains enabled, but do not + * increment its reference counter. + */ + if (gpe_event_info->runtime_count) { + acpi_set_gpe(gpe_device, gpe_number, + ACPI_GPE_ENABLE); + gpe_enabled_count++; + continue; + } if (gpe_event_info->flags & ACPI_GPE_CAN_WAKE) { wake_gpe_count++; @@ -516,7 +529,6 @@ acpi_ev_initialize_gpe_block(struct acpi_namespace_node *gpe_device, /* Enable this GPE */ - gpe_number = gpe_index + gpe_block->block_base_number; status = acpi_enable_gpe(gpe_device, gpe_number, ACPI_GPE_TYPE_RUNTIME); if (ACPI_FAILURE(status)) { diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c index cc825023012..4a531cdf794 100644 --- a/drivers/acpi/acpica/evxface.c +++ b/drivers/acpi/acpica/evxface.c @@ -719,13 +719,6 @@ acpi_install_gpe_handler(acpi_handle gpe_device, handler->context = context; handler->method_node = gpe_event_info->dispatch.method_node; - /* Disable the GPE before installing the handler */ - - status = acpi_ev_disable_gpe(gpe_event_info); - if (ACPI_FAILURE (status)) { - goto unlock_and_exit; - } - /* Install the handler */ flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock); diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c index d5a5efc043b..18b3f1468b7 100644 --- a/drivers/acpi/acpica/evxfevnt.c +++ b/drivers/acpi/acpica/evxfevnt.c @@ -70,6 +70,7 @@ acpi_ev_get_gpe_device(struct acpi_gpe_xrupt_info *gpe_xrupt_info, acpi_status acpi_enable(void) { acpi_status status; + int retry; ACPI_FUNCTION_TRACE(acpi_enable); @@ -98,16 +99,18 @@ acpi_status acpi_enable(void) /* Sanity check that transition succeeded */ - if (acpi_hw_get_mode() != ACPI_SYS_MODE_ACPI) { - ACPI_ERROR((AE_INFO, - "Hardware did not enter ACPI mode")); - return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); + for (retry = 0; retry < 30000; ++retry) { + if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) { + if (retry != 0) + ACPI_WARNING((AE_INFO, + "Platform took > %d00 usec to enter ACPI mode", retry)); + return_ACPI_STATUS(AE_OK); + } + acpi_os_stall(100); /* 100 usec */ } - ACPI_DEBUG_PRINT((ACPI_DB_INIT, - "Transition to ACPI mode successful\n")); - - return_ACPI_STATUS(AE_OK); + ACPI_ERROR((AE_INFO, "Hardware did not enter ACPI mode")); + return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE); } ACPI_EXPORT_SYMBOL(acpi_enable) @@ -210,6 +213,44 @@ ACPI_EXPORT_SYMBOL(acpi_enable_event) /******************************************************************************* * + * FUNCTION: acpi_clear_and_enable_gpe + * + * PARAMETERS: gpe_event_info - GPE to enable + * + * RETURN: Status + * + * DESCRIPTION: Clear the given GPE from stale events and enable it. + * + ******************************************************************************/ +static acpi_status +acpi_clear_and_enable_gpe(struct acpi_gpe_event_info *gpe_event_info) +{ + acpi_status status; + + /* + * We will only allow a GPE to be enabled if it has either an + * associated method (_Lxx/_Exx) or a handler. Otherwise, the + * GPE will be immediately disabled by acpi_ev_gpe_dispatch the + * first time it fires. + */ + if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) { + return_ACPI_STATUS(AE_NO_HANDLER); + } + + /* Clear the GPE (of stale events) */ + status = acpi_hw_clear_gpe(gpe_event_info); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + + /* Enable the requested GPE */ + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_ENABLE); + + return_ACPI_STATUS(status); +} + +/******************************************************************************* + * * FUNCTION: acpi_set_gpe * * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1 @@ -249,11 +290,11 @@ acpi_status acpi_set_gpe(acpi_handle gpe_device, u32 gpe_number, u8 action) switch (action) { case ACPI_GPE_ENABLE: - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_clear_and_enable_gpe(gpe_event_info); break; case ACPI_GPE_DISABLE: - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE); break; default: @@ -316,7 +357,11 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) gpe_event_info->runtime_count++; if (gpe_event_info->runtime_count == 1) { - status = acpi_ev_enable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_clear_and_enable_gpe(gpe_event_info); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count--; goto unlock_and_exit; @@ -343,7 +388,7 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type) */ gpe_event_info->wakeup_count++; if (gpe_event_info->wakeup_count == 1) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } @@ -403,7 +448,12 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->runtime_count--; if (!gpe_event_info->runtime_count) { - status = acpi_ev_disable_gpe(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); + if (ACPI_SUCCESS(status)) { + status = acpi_hw_low_set_gpe(gpe_event_info, + ACPI_GPE_DISABLE); + } + if (ACPI_FAILURE(status)) { gpe_event_info->runtime_count++; goto unlock_and_exit; @@ -424,7 +474,7 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number, u8 gpe_type gpe_event_info->wakeup_count--; if (!gpe_event_info->wakeup_count) { - (void)acpi_ev_update_gpe_enable_masks(gpe_event_info); + status = acpi_ev_update_gpe_enable_masks(gpe_event_info); } } diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c index 6d32e09327f..675aaa91a77 100644 --- a/drivers/acpi/acpica/exsystem.c +++ b/drivers/acpi/acpica/exsystem.c @@ -201,6 +201,14 @@ acpi_status acpi_ex_system_do_sleep(u64 how_long) acpi_ex_relinquish_interpreter(); + /* + * For compatibility with other ACPI implementations and to prevent + * accidental deep sleeps, limit the sleep time to something reasonable. + */ + if (how_long > ACPI_MAX_SLEEP) { + how_long = ACPI_MAX_SLEEP; + } + acpi_os_sleep(how_long); /* And now we must get the interpreter again */ diff --git a/drivers/acpi/acpica/hwgpe.c b/drivers/acpi/acpica/hwgpe.c index bd72319a38f..3450309c278 100644 --- a/drivers/acpi/acpica/hwgpe.c +++ b/drivers/acpi/acpica/hwgpe.c @@ -57,21 +57,47 @@ acpi_hw_enable_wakeup_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info, /****************************************************************************** * - * FUNCTION: acpi_hw_low_disable_gpe + * FUNCTION: acpi_hw_gpe_register_bit + * + * PARAMETERS: gpe_event_info - Info block for the GPE + * gpe_register_info - Info block for the GPE register + * + * RETURN: Status + * + * DESCRIPTION: Compute GPE enable mask with one bit corresponding to the given + * GPE set. + * + ******************************************************************************/ + +u32 acpi_hw_gpe_register_bit(struct acpi_gpe_event_info *gpe_event_info, + struct acpi_gpe_register_info *gpe_register_info) +{ + return (u32)1 << (gpe_event_info->gpe_number - + gpe_register_info->base_gpe_number); +} + +/****************************************************************************** + * + * FUNCTION: acpi_hw_low_set_gpe * * PARAMETERS: gpe_event_info - Info block for the GPE to be disabled + * action - Enable or disable * * RETURN: Status * - * DESCRIPTION: Disable a single GPE in the enable register. + * DESCRIPTION: Enable or disable a single GPE in its enable register. * ******************************************************************************/ -acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) +acpi_status +acpi_hw_low_set_gpe(struct acpi_gpe_event_info *gpe_event_info, u8 action) { struct acpi_gpe_register_info *gpe_register_info; acpi_status status; u32 enable_mask; + u32 register_bit; + + ACPI_FUNCTION_ENTRY(); /* Get the info block for the entire GPE register */ @@ -87,11 +113,27 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) return (status); } - /* Clear just the bit that corresponds to this GPE */ + /* Set ot clear just the bit that corresponds to this GPE */ - ACPI_CLEAR_BIT(enable_mask, ((u32)1 << - (gpe_event_info->gpe_number - - gpe_register_info->base_gpe_number))); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); + switch (action) { + case ACPI_GPE_COND_ENABLE: + if (!(register_bit & gpe_register_info->enable_for_run)) + return (AE_BAD_PARAMETER); + + case ACPI_GPE_ENABLE: + ACPI_SET_BIT(enable_mask, register_bit); + break; + + case ACPI_GPE_DISABLE: + ACPI_CLEAR_BIT(enable_mask, register_bit); + break; + + default: + ACPI_ERROR((AE_INFO, "Invalid action\n")); + return (AE_BAD_PARAMETER); + } /* Write the updated enable mask */ @@ -116,23 +158,11 @@ acpi_status acpi_hw_low_disable_gpe(struct acpi_gpe_event_info *gpe_event_info) acpi_status acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) { - struct acpi_gpe_register_info *gpe_register_info; acpi_status status; ACPI_FUNCTION_ENTRY(); - /* Get the info block for the entire GPE register */ - - gpe_register_info = gpe_event_info->register_info; - if (!gpe_register_info) { - return (AE_NOT_EXIST); - } - - /* Write the entire GPE (runtime) enable register */ - - status = acpi_hw_write(gpe_register_info->enable_for_run, - &gpe_register_info->enable_address); - + status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_COND_ENABLE); return (status); } @@ -150,21 +180,28 @@ acpi_hw_write_gpe_enable_reg(struct acpi_gpe_event_info * gpe_event_info) acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info) { + struct acpi_gpe_register_info *gpe_register_info; acpi_status status; - u8 register_bit; + u32 register_bit; ACPI_FUNCTION_ENTRY(); - register_bit = (u8)(1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + /* Get the info block for the entire GPE register */ + + gpe_register_info = gpe_event_info->register_info; + if (!gpe_register_info) { + return (AE_NOT_EXIST); + } + + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* * Write a one to the appropriate bit in the status register to * clear this GPE. */ status = acpi_hw_write(register_bit, - &gpe_event_info->register_info->status_address); + &gpe_register_info->status_address); return (status); } @@ -187,7 +224,7 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, acpi_event_status * event_status) { u32 in_byte; - u8 register_bit; + u32 register_bit; struct acpi_gpe_register_info *gpe_register_info; acpi_status status; acpi_event_status local_event_status = 0; @@ -204,9 +241,8 @@ acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info, /* Get the register bitmask for this GPE */ - register_bit = (u8)(1 << - (gpe_event_info->gpe_number - - gpe_event_info->register_info->base_gpe_number)); + register_bit = acpi_hw_gpe_register_bit(gpe_event_info, + gpe_register_info); /* GPE currently enabled? (enabled for runtime?) */ diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index c10d587c164..e1d9c777b21 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -222,6 +222,12 @@ acpi_status acpi_hw_read_port(acpi_io_address address, u32 *value, u32 width) u32 one_byte; u32 i; + /* Truncate address to 16 bits if requested */ + + if (acpi_gbl_truncate_io_addresses) { + address &= ACPI_UINT16_MAX; + } + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); @@ -279,6 +285,12 @@ acpi_status acpi_hw_write_port(acpi_io_address address, u32 value, u32 width) acpi_status status; u32 i; + /* Truncate address to 16 bits if requested */ + + if (acpi_gbl_truncate_io_addresses) { + address &= ACPI_UINT16_MAX; + } + /* Validate the entire request and perform the I/O */ status = acpi_hw_validate_io_request(address, width); diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c index 9bd6f050f29..4e5272c313e 100644 --- a/drivers/acpi/acpica/nsinit.c +++ b/drivers/acpi/acpica/nsinit.c @@ -193,6 +193,15 @@ acpi_status acpi_ns_initialize_devices(void) acpi_ns_init_one_device, NULL, &info, NULL); + /* + * Any _OSI requests should be completed by now. If the BIOS has + * requested any Windows OSI strings, we will always truncate + * I/O addresses to 16 bits -- for Windows compatibility. + */ + if (acpi_gbl_osi_data >= ACPI_OSI_WIN_2000) { + acpi_gbl_truncate_io_addresses = TRUE; + } + ACPI_FREE(info.evaluate_info); if (ACPI_FAILURE(status)) { goto error_exit; diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index db3946e9c66..216e1e948ff 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -34,6 +34,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/acpi.h> +#include <linux/slab.h> #include <linux/io.h> #include <linux/kref.h> #include <linux/rculist.h> diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 2ebc3911550..864dd46c346 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -781,7 +781,7 @@ static int __init erst_init(void) status = acpi_get_table(ACPI_SIG_ERST, 0, (struct acpi_table_header **)&erst_tab); if (status == AE_NOT_FOUND) { - pr_err(ERST_PFX "Table is not found!\n"); + pr_info(ERST_PFX "Table is not found!\n"); goto err; } else if (ACPI_FAILURE(status)) { const char *msg = acpi_format_exception(status); diff --git a/drivers/acpi/atomicio.c b/drivers/acpi/atomicio.c index 814b1924961..8f8bd736d4f 100644 --- a/drivers/acpi/atomicio.c +++ b/drivers/acpi/atomicio.c @@ -31,6 +31,7 @@ #include <linux/kref.h> #include <linux/rculist.h> #include <linux/interrupt.h> +#include <linux/slab.h> #include <acpi/atomicio.h> #define ACPI_PFX "ACPI: " diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index 3026e3fa83e..dc58402b0a1 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -868,9 +868,15 @@ static void acpi_battery_remove_fs(struct acpi_device *device) static void acpi_battery_notify(struct acpi_device *device, u32 event) { struct acpi_battery *battery = acpi_driver_data(device); +#ifdef CONFIG_ACPI_SYSFS_POWER + struct device *old; +#endif if (!battery) return; +#ifdef CONFIG_ACPI_SYSFS_POWER + old = battery->bat.dev; +#endif acpi_battery_update(battery); acpi_bus_generate_proc_event(device, event, acpi_battery_present(battery)); @@ -879,7 +885,7 @@ static void acpi_battery_notify(struct acpi_device *device, u32 event) acpi_battery_present(battery)); #ifdef CONFIG_ACPI_SYSFS_POWER /* acpi_battery_update could remove power_supply object */ - if (battery->bat.dev) + if (old && battery->bat.dev) power_supply_changed(&battery->bat); #endif } diff --git a/drivers/acpi/blacklist.c b/drivers/acpi/blacklist.c index 2815df66f6f..2bb28b9d91c 100644 --- a/drivers/acpi/blacklist.c +++ b/drivers/acpi/blacklist.c @@ -214,7 +214,15 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = { .ident = "Sony VGN-SR290J", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), - DMI_MATCH(DMI_PRODUCT_NAME, "Sony VGN-SR290J"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR290J"), + }, + }, + { + .callback = dmi_disable_osi_vista, + .ident = "VGN-NS50B_L", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NS50B_L"), }, }, { diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index fd51c4ab482..7d857dabdde 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -425,7 +425,7 @@ static int acpi_button_add(struct acpi_device *device) /* Button's GPE is run-wake GPE */ acpi_enable_gpe(device->wakeup.gpe_device, device->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); + ACPI_GPE_TYPE_RUNTIME); device->wakeup.run_wake_count++; device->wakeup.state.enabled = 1; } @@ -449,7 +449,7 @@ static int acpi_button_remove(struct acpi_device *device, int type) if (device->wakeup.flags.valid) { acpi_disable_gpe(device->wakeup.gpe_device, device->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE_RUN); + ACPI_GPE_TYPE_RUNTIME); device->wakeup.run_wake_count--; device->wakeup.state.enabled = 0; } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5f2027d782e..1fa0aafebe2 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -34,8 +34,6 @@ #include <linux/init.h> #include <linux/types.h> #include <linux/delay.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> #include <linux/interrupt.h> #include <linux/list.h> #include <linux/spinlock.h> @@ -45,10 +43,13 @@ #include <acpi/acpi_drivers.h> #include <linux/dmi.h> +#include "internal.h" + #define ACPI_EC_CLASS "embedded_controller" #define ACPI_EC_DEVICE_NAME "Embedded Controller" #define ACPI_EC_FILE_INFO "info" +#undef PREFIX #define PREFIX "ACPI: EC: " /* EC status register */ @@ -106,19 +107,8 @@ struct transaction { bool done; }; -static struct acpi_ec { - acpi_handle handle; - unsigned long gpe; - unsigned long command_addr; - unsigned long data_addr; - unsigned long global_lock; - unsigned long flags; - struct mutex lock; - wait_queue_head_t wait; - struct list_head list; - struct transaction *curr; - spinlock_t curr_lock; -} *boot_ec, *first_ec; +struct acpi_ec *boot_ec, *first_ec; +EXPORT_SYMBOL(first_ec); static int EC_FLAGS_MSI; /* Out-of-spec MSI controller */ static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */ @@ -679,72 +669,6 @@ acpi_ec_space_handler(u32 function, acpi_physical_address address, } /* -------------------------------------------------------------------------- - FS Interface (/proc) - -------------------------------------------------------------------------- */ - -static struct proc_dir_entry *acpi_ec_dir; - -static int acpi_ec_read_info(struct seq_file *seq, void *offset) -{ - struct acpi_ec *ec = seq->private; - - if (!ec) - goto end; - - seq_printf(seq, "gpe:\t\t\t0x%02x\n", (u32) ec->gpe); - seq_printf(seq, "ports:\t\t\t0x%02x, 0x%02x\n", - (unsigned)ec->command_addr, (unsigned)ec->data_addr); - seq_printf(seq, "use global lock:\t%s\n", - ec->global_lock ? "yes" : "no"); - end: - return 0; -} - -static int acpi_ec_info_open_fs(struct inode *inode, struct file *file) -{ - return single_open(file, acpi_ec_read_info, PDE(inode)->data); -} - -static const struct file_operations acpi_ec_info_ops = { - .open = acpi_ec_info_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .owner = THIS_MODULE, -}; - -static int acpi_ec_add_fs(struct acpi_device *device) -{ - struct proc_dir_entry *entry = NULL; - - if (!acpi_device_dir(device)) { - acpi_device_dir(device) = proc_mkdir(acpi_device_bid(device), - acpi_ec_dir); - if (!acpi_device_dir(device)) - return -ENODEV; - } - - entry = proc_create_data(ACPI_EC_FILE_INFO, S_IRUGO, - acpi_device_dir(device), - &acpi_ec_info_ops, acpi_driver_data(device)); - if (!entry) - return -ENODEV; - return 0; -} - -static int acpi_ec_remove_fs(struct acpi_device *device) -{ - - if (acpi_device_dir(device)) { - remove_proc_entry(ACPI_EC_FILE_INFO, acpi_device_dir(device)); - remove_proc_entry(acpi_device_bid(device), acpi_ec_dir); - acpi_device_dir(device) = NULL; - } - - return 0; -} - -/* -------------------------------------------------------------------------- Driver Interface -------------------------------------------------------------------------- */ static acpi_status @@ -894,7 +818,12 @@ static int acpi_ec_add(struct acpi_device *device) if (!first_ec) first_ec = ec; device->driver_data = ec; - acpi_ec_add_fs(device); + + WARN(!request_region(ec->data_addr, 1, "EC data"), + "Could not request EC data io port 0x%lx", ec->data_addr); + WARN(!request_region(ec->command_addr, 1, "EC cmd"), + "Could not request EC cmd io port 0x%lx", ec->command_addr); + pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); @@ -921,7 +850,8 @@ static int acpi_ec_remove(struct acpi_device *device, int type) kfree(handler); } mutex_unlock(&ec->lock); - acpi_ec_remove_fs(device); + release_region(ec->data_addr, 1); + release_region(ec->command_addr, 1); device->driver_data = NULL; if (ec == first_ec) first_ec = NULL; @@ -1120,16 +1050,10 @@ int __init acpi_ec_init(void) { int result = 0; - acpi_ec_dir = proc_mkdir(ACPI_EC_CLASS, acpi_root_dir); - if (!acpi_ec_dir) - return -ENODEV; - /* Now register the driver for the EC */ result = acpi_bus_register_driver(&acpi_ec_driver); - if (result < 0) { - remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); + if (result < 0) return -ENODEV; - } return result; } @@ -1140,9 +1064,6 @@ static void __exit acpi_ec_exit(void) { acpi_bus_unregister_driver(&acpi_ec_driver); - - remove_proc_entry(ACPI_EC_CLASS, acpi_root_dir); - return; } #endif /* 0 */ diff --git a/drivers/acpi/ec_sys.c b/drivers/acpi/ec_sys.c new file mode 100644 index 00000000000..0e869b3f81c --- /dev/null +++ b/drivers/acpi/ec_sys.c @@ -0,0 +1,160 @@ +/* + * ec_sys.c + * + * Copyright (C) 2010 SUSE Products GmbH/Novell + * Author: + * Thomas Renninger <trenn@suse.de> + * + * This work is licensed under the terms of the GNU GPL, version 2. + */ + +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/debugfs.h> +#include "internal.h" + +MODULE_AUTHOR("Thomas Renninger <trenn@suse.de>"); +MODULE_DESCRIPTION("ACPI EC sysfs access driver"); +MODULE_LICENSE("GPL"); + +static bool write_support; +module_param(write_support, bool, 0644); +MODULE_PARM_DESC(write_support, "Dangerous, reboot and removal of battery may " + "be needed."); + +#define EC_SPACE_SIZE 256 + +struct sysdev_class acpi_ec_sysdev_class = { + .name = "ec", +}; + +static struct dentry *acpi_ec_debugfs_dir; + +static int acpi_ec_open_io(struct inode *i, struct file *f) +{ + f->private_data = i->i_private; + return 0; +} + +static ssize_t acpi_ec_read_io(struct file *f, char __user *buf, + size_t count, loff_t *off) +{ + /* Use this if support reading/writing multiple ECs exists in ec.c: + * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; + */ + unsigned int size = EC_SPACE_SIZE; + u8 *data = (u8 *) buf; + loff_t init_off = *off; + int err = 0; + + if (*off >= size) + return 0; + if (*off + count >= size) { + size -= *off; + count = size; + } else + size = count; + + while (size) { + err = ec_read(*off, &data[*off - init_off]); + if (err) + return err; + *off += 1; + size--; + } + return count; +} + +static ssize_t acpi_ec_write_io(struct file *f, const char __user *buf, + size_t count, loff_t *off) +{ + /* Use this if support reading/writing multiple ECs exists in ec.c: + * struct acpi_ec *ec = ((struct seq_file *)f->private_data)->private; + */ + + unsigned int size = count; + loff_t init_off = *off; + u8 *data = (u8 *) buf; + int err = 0; + + if (*off >= EC_SPACE_SIZE) + return 0; + if (*off + count >= EC_SPACE_SIZE) { + size = EC_SPACE_SIZE - *off; + count = size; + } + + while (size) { + u8 byte_write = data[*off - init_off]; + err = ec_write(*off, byte_write); + if (err) + return err; + + *off += 1; + size--; + } + return count; +} + +static struct file_operations acpi_ec_io_ops = { + .owner = THIS_MODULE, + .open = acpi_ec_open_io, + .read = acpi_ec_read_io, + .write = acpi_ec_write_io, +}; + +int acpi_ec_add_debugfs(struct acpi_ec *ec, unsigned int ec_device_count) +{ + struct dentry *dev_dir; + char name[64]; + mode_t mode = 0400; + + if (ec_device_count == 0) { + acpi_ec_debugfs_dir = debugfs_create_dir("ec", NULL); + if (!acpi_ec_debugfs_dir) + return -ENOMEM; + } + + sprintf(name, "ec%u", ec_device_count); + dev_dir = debugfs_create_dir(name, acpi_ec_debugfs_dir); + if (!dev_dir) { + if (ec_device_count != 0) + goto error; + return -ENOMEM; + } + + if (!debugfs_create_x32("gpe", 0444, dev_dir, (u32 *)&first_ec->gpe)) + goto error; + if (!debugfs_create_bool("use_global_lock", 0444, dev_dir, + (u32 *)&first_ec->global_lock)) + goto error; + + if (write_support) + mode = 0600; + if (!debugfs_create_file("io", mode, dev_dir, ec, &acpi_ec_io_ops)) + goto error; + + return 0; + +error: + debugfs_remove_recursive(acpi_ec_debugfs_dir); + return -ENOMEM; +} + +static int __init acpi_ec_sys_init(void) +{ + int err = 0; + if (first_ec) + err = acpi_ec_add_debugfs(first_ec, 0); + else + err = -ENODEV; + return err; +} + +static void __exit acpi_ec_sys_exit(void) +{ + debugfs_remove_recursive(acpi_ec_debugfs_dir); +} + +module_init(acpi_ec_sys_init); +module_exit(acpi_ec_sys_exit); diff --git a/drivers/acpi/fan.c b/drivers/acpi/fan.c index acf2ab24984..8a3b840c0bb 100644 --- a/drivers/acpi/fan.c +++ b/drivers/acpi/fan.c @@ -347,7 +347,6 @@ static int __init acpi_fan_init(void) { int result = 0; - #ifdef CONFIG_ACPI_PROCFS acpi_fan_dir = proc_mkdir(ACPI_FAN_CLASS, acpi_root_dir); if (!acpi_fan_dir) @@ -356,7 +355,9 @@ static int __init acpi_fan_init(void) result = acpi_bus_register_driver(&acpi_fan_driver); if (result < 0) { +#ifdef CONFIG_ACPI_PROCFS remove_proc_entry(ACPI_FAN_CLASS, acpi_root_dir); +#endif return -ENODEV; } diff --git a/drivers/acpi/internal.h b/drivers/acpi/internal.h index f8f190ec066..8ae27264a00 100644 --- a/drivers/acpi/internal.h +++ b/drivers/acpi/internal.h @@ -18,6 +18,11 @@ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef _ACPI_INTERNAL_H_ +#define _ACPI_INTERNAL_H_ + +#include <linux/sysdev.h> + #define PREFIX "ACPI: " int init_acpi_device_notify(void); @@ -46,6 +51,23 @@ void acpi_early_processor_set_pdc(void); /* -------------------------------------------------------------------------- Embedded Controller -------------------------------------------------------------------------- */ +struct acpi_ec { + acpi_handle handle; + unsigned long gpe; + unsigned long command_addr; + unsigned long data_addr; + unsigned long global_lock; + unsigned long flags; + struct mutex lock; + wait_queue_head_t wait; + struct list_head list; + struct transaction *curr; + spinlock_t curr_lock; + struct sys_device sysdev; +}; + +extern struct acpi_ec *first_ec; + int acpi_ec_init(void); int acpi_ec_ecdt_probe(void); int acpi_boot_ec_enable(void); @@ -63,3 +85,5 @@ int acpi_sleep_proc_init(void); #else static inline int acpi_sleep_proc_init(void) { return 0; } #endif + +#endif /* _ACPI_INTERNAL_H_ */ diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 4eac59393ed..1f67057af2a 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -33,6 +33,7 @@ #include <linux/pm_runtime.h> #include <linux/pci.h> #include <linux/pci-acpi.h> +#include <linux/pci-aspm.h> #include <linux/acpi.h> #include <linux/slab.h> #include <acpi/acpi_bus.h> @@ -543,6 +544,14 @@ static int __devinit acpi_pci_root_add(struct acpi_device *device) if (flags != base_flags) acpi_pci_osc_support(root, flags); + status = acpi_pci_osc_control_set(root->device->handle, + OSC_PCI_EXPRESS_CAP_STRUCTURE_CONTROL); + + if (ACPI_FAILURE(status)) { + printk(KERN_INFO "Unable to assume PCIe control: Disabling ASPM\n"); + pcie_no_aspm(); + } + pci_acpi_add_bus_pm_notifier(device, root->bus); if (device->wakeup.flags.run_wake) device_set_run_wake(root->bus->bridge, true); diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 51284351418..e9699aaed10 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -223,7 +223,7 @@ static bool processor_physically_present(acpi_handle handle) type = (acpi_type == ACPI_TYPE_DEVICE) ? 1 : 0; cpuid = acpi_get_cpuid(handle, type, acpi_id); - if (cpuid == -1) + if ((cpuid == -1) && (num_possible_cpus() > 1)) return false; return true; diff --git a/drivers/acpi/processor_driver.c b/drivers/acpi/processor_driver.c index b1034a9ada4..38ea0cc6dc4 100644 --- a/drivers/acpi/processor_driver.c +++ b/drivers/acpi/processor_driver.c @@ -581,6 +581,11 @@ static int __cpuinit acpi_processor_add(struct acpi_device *device) return 0; } +#ifdef CONFIG_SMP + if (pr->id >= setup_max_cpus && pr->id != 0) + return 0; +#endif + BUG_ON((pr->id >= nr_cpu_ids) || (pr->id < 0)); /* diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index b1b385692f4..b4c2f3bdade 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -76,14 +76,19 @@ static unsigned int max_cstate __read_mostly = ACPI_PROCESSOR_MAX_POWER; module_param(max_cstate, uint, 0000); static unsigned int nocst __read_mostly; module_param(nocst, uint, 0000); +static int bm_check_disable __read_mostly; +module_param(bm_check_disable, uint, 0000); static unsigned int latency_factor __read_mostly = 2; module_param(latency_factor, uint, 0644); +#ifdef CONFIG_ACPI_PROCFS static u64 us_to_pm_timer_ticks(s64 t) { return div64_u64(t * PM_TIMER_FREQUENCY, 1000000); } +#endif + /* * IBM ThinkPad R40e crashes mysteriously when going into C2 or C3. * For now disable this. Probably a bug somewhere else. @@ -159,7 +164,7 @@ static void lapic_timer_check_state(int state, struct acpi_processor *pr, if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) return; - if (boot_cpu_has(X86_FEATURE_AMDC1E)) + if (c1e_detected) type = ACPI_STATE_C1; /* @@ -259,7 +264,7 @@ int acpi_processor_resume(struct acpi_device * device) return 0; } -#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86) +#if defined(CONFIG_X86) static void tsc_check_state(int state) { switch (boot_cpu_data.x86_vendor) { @@ -763,6 +768,9 @@ static int acpi_idle_bm_check(void) { u32 bm_status = 0; + if (bm_check_disable) + return 0; + acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status); if (bm_status) acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_STATUS, 1); @@ -947,7 +955,7 @@ static int acpi_idle_enter_bm(struct cpuidle_device *dev, if (acpi_idle_suspend) return(acpi_idle_enter_c1(dev, state)); - if (acpi_idle_bm_check()) { + if (!cx->bm_sts_skip && acpi_idle_bm_check()) { if (dev->safe_state) { dev->last_state = dev->safe_state; return dev->safe_state->enter(dev, dev->safe_state); diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c index 3fb4bdea7e0..2862c781b37 100644 --- a/drivers/acpi/sleep.c +++ b/drivers/acpi/sleep.c @@ -82,6 +82,20 @@ static int acpi_sleep_prepare(u32 acpi_state) static u32 acpi_target_sleep_state = ACPI_STATE_S0; /* + * The ACPI specification wants us to save NVS memory regions during hibernation + * and to restore them during the subsequent resume. Windows does that also for + * suspend to RAM. However, it is known that this mechanism does not work on + * all machines, so we allow the user to disable it with the help of the + * 'acpi_sleep=nonvs' kernel command line option. + */ +static bool nvs_nosave; + +void __init acpi_nvs_nosave(void) +{ + nvs_nosave = true; +} + +/* * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the * user to request that behavior by using the 'acpi_old_suspend_ordering' * kernel command line option that causes the following variable to be set. @@ -114,6 +128,8 @@ static int __acpi_pm_prepare(void) { int error = acpi_sleep_prepare(acpi_target_sleep_state); + suspend_nvs_save(); + if (error) acpi_target_sleep_state = ACPI_STATE_S0; return error; @@ -143,6 +159,9 @@ static void acpi_pm_finish(void) { u32 acpi_state = acpi_target_sleep_state; + suspend_nvs_free(); + acpi_ec_unblock_transactions(); + if (acpi_state == ACPI_STATE_S0) return; @@ -192,6 +211,10 @@ static int acpi_suspend_begin(suspend_state_t pm_state) u32 acpi_state = acpi_suspend_states[pm_state]; int error = 0; + error = nvs_nosave ? 0 : suspend_nvs_alloc(); + if (error) + return error; + if (sleep_states[acpi_state]) { acpi_target_sleep_state = acpi_state; acpi_sleep_tts_switch(acpi_target_sleep_state); @@ -269,12 +292,13 @@ static int acpi_suspend_enter(suspend_state_t pm_state) if (acpi_state == ACPI_STATE_S3) acpi_restore_state_mem(); + suspend_nvs_restore(); + return ACPI_SUCCESS(status) ? 0 : -EFAULT; } static void acpi_suspend_finish(void) { - acpi_ec_unblock_transactions(); acpi_pm_finish(); } @@ -377,20 +401,6 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = { #endif /* CONFIG_SUSPEND */ #ifdef CONFIG_HIBERNATION -/* - * The ACPI specification wants us to save NVS memory regions during hibernation - * and to restore them during the subsequent resume. However, it is not certain - * if this mechanism is going to work on all machines, so we allow the user to - * disable this mechanism using the 'acpi_sleep=s4_nonvs' kernel command line - * option. - */ -static bool s4_no_nvs; - -void __init acpi_s4_no_nvs(void) -{ - s4_no_nvs = true; -} - static unsigned long s4_hardware_signature; static struct acpi_table_facs *facs; static bool nosigcheck; @@ -404,7 +414,7 @@ static int acpi_hibernation_begin(void) { int error; - error = s4_no_nvs ? 0 : hibernate_nvs_alloc(); + error = nvs_nosave ? 0 : suspend_nvs_alloc(); if (!error) { acpi_target_sleep_state = ACPI_STATE_S4; acpi_sleep_tts_switch(acpi_target_sleep_state); @@ -418,7 +428,7 @@ static int acpi_hibernation_pre_snapshot(void) int error = acpi_pm_prepare(); if (!error) - hibernate_nvs_save(); + suspend_nvs_save(); return error; } @@ -441,13 +451,6 @@ static int acpi_hibernation_enter(void) return ACPI_SUCCESS(status) ? 0 : -EFAULT; } -static void acpi_hibernation_finish(void) -{ - hibernate_nvs_free(); - acpi_ec_unblock_transactions(); - acpi_pm_finish(); -} - static void acpi_hibernation_leave(void) { /* @@ -464,7 +467,7 @@ static void acpi_hibernation_leave(void) panic("ACPI S4 hardware signature mismatch"); } /* Restore the NVS memory area */ - hibernate_nvs_restore(); + suspend_nvs_restore(); /* Allow EC transactions to happen. */ acpi_ec_unblock_transactions_early(); } @@ -479,7 +482,7 @@ static struct platform_hibernation_ops acpi_hibernation_ops = { .begin = acpi_hibernation_begin, .end = acpi_pm_end, .pre_snapshot = acpi_hibernation_pre_snapshot, - .finish = acpi_hibernation_finish, + .finish = acpi_pm_finish, .prepare = acpi_pm_prepare, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, @@ -506,8 +509,8 @@ static int acpi_hibernation_begin_old(void) error = acpi_sleep_prepare(ACPI_STATE_S4); if (!error) { - if (!s4_no_nvs) - error = hibernate_nvs_alloc(); + if (!nvs_nosave) + error = suspend_nvs_alloc(); if (!error) acpi_target_sleep_state = ACPI_STATE_S4; } @@ -517,7 +520,7 @@ static int acpi_hibernation_begin_old(void) static int acpi_hibernation_pre_snapshot_old(void) { acpi_pm_freeze(); - hibernate_nvs_save(); + suspend_nvs_save(); return 0; } @@ -529,8 +532,8 @@ static struct platform_hibernation_ops acpi_hibernation_ops_old = { .begin = acpi_hibernation_begin_old, .end = acpi_pm_end, .pre_snapshot = acpi_hibernation_pre_snapshot_old, - .finish = acpi_hibernation_finish, .prepare = acpi_pm_freeze, + .finish = acpi_pm_finish, .enter = acpi_hibernation_enter, .leave = acpi_hibernation_leave, .pre_restore = acpi_pm_freeze, diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index c79e789ed03..f8db50a0941 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -388,10 +388,12 @@ static ssize_t counter_set(struct kobject *kobj, if (index < num_gpes) { if (!strcmp(buf, "disable\n") && (status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_set_gpe(handle, index, ACPI_GPE_DISABLE); + result = acpi_disable_gpe(handle, index, + ACPI_GPE_TYPE_RUNTIME); else if (!strcmp(buf, "enable\n") && !(status & ACPI_EVENT_FLAG_ENABLED)) - result = acpi_set_gpe(handle, index, ACPI_GPE_ENABLE); + result = acpi_enable_gpe(handle, index, + ACPI_GPE_TYPE_RUNTIME); else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index); diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index 4b9d339a6e2..388747a7ef4 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -64,16 +64,13 @@ void acpi_enable_wakeup_device(u8 sleep_state) struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); - if (!dev->wakeup.flags.valid) - continue; - - if ((!dev->wakeup.state.enabled && !dev->wakeup.prepare_count) + if (!dev->wakeup.flags.valid || !dev->wakeup.state.enabled || sleep_state > (u32) dev->wakeup.sleep_state) continue; /* The wake-up power should have been enabled already. */ - acpi_set_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, - ACPI_GPE_ENABLE); + acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE); } } @@ -96,6 +93,8 @@ void acpi_disable_wakeup_device(u8 sleep_state) || (sleep_state > (u32) dev->wakeup.sleep_state)) continue; + acpi_disable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, + ACPI_GPE_TYPE_WAKE); acpi_disable_wakeup_device_power(dev); } } @@ -109,13 +108,8 @@ int __init acpi_wakeup_device_init(void) struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); - /* In case user doesn't load button driver */ - if (!dev->wakeup.flags.always_enabled || - dev->wakeup.state.enabled) - continue; - acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, - ACPI_GPE_TYPE_WAKE); - dev->wakeup.state.enabled = 1; + if (dev->wakeup.flags.always_enabled) + dev->wakeup.state.enabled = 1; } mutex_unlock(&acpi_device_lock); return 0; |