diff options
Diffstat (limited to 'drivers/acpi/acpica/exutils.c')
| -rw-r--r-- | drivers/acpi/acpica/exutils.c | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c new file mode 100644 index 00000000000..32b85d68e75 --- /dev/null +++ b/drivers/acpi/acpica/exutils.c @@ -0,0 +1,421 @@ + +/****************************************************************************** + * + * Module Name: exutils - interpreter/scanner utilities + * + *****************************************************************************/ + +/* + * Copyright (C) 2000 - 2008, Intel Corp. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions, and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * substantially similar to the "NO WARRANTY" disclaimer below + * ("Disclaimer") and any redistribution must be conditioned upon + * including a substantially similar Disclaimer requirement for further + * binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, + * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING + * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGES. + */ + +/* + * DEFINE_AML_GLOBALS is tested in amlcode.h + * to determine whether certain global names should be "defined" or only + * "declared" in the current compilation. This enhances maintainability + * by enabling a single header file to embody all knowledge of the names + * in question. + * + * Exactly one module of any executable should #define DEFINE_GLOBALS + * before #including the header files which use this convention. The + * names in question will be defined and initialized in that module, + * and declared as extern in all other modules which #include those + * header files. + */ + +#define DEFINE_AML_GLOBALS + +#include <acpi/acpi.h> +#include "accommon.h" +#include "acinterp.h" +#include "amlcode.h" + +#define _COMPONENT ACPI_EXECUTER +ACPI_MODULE_NAME("exutils") + +/* Local prototypes */ +static u32 acpi_ex_digits_needed(acpi_integer value, u32 base); + +#ifndef ACPI_NO_METHOD_EXECUTION +/******************************************************************************* + * + * FUNCTION: acpi_ex_enter_interpreter + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Enter the interpreter execution region. Failure to enter + * the interpreter region is a fatal system error. Used in + * conjunction with exit_interpreter. + * + ******************************************************************************/ + +void acpi_ex_enter_interpreter(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ex_enter_interpreter); + + status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, + "Could not acquire AML Interpreter mutex")); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_reacquire_interpreter + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Reacquire the interpreter execution region from within the + * interpreter code. Failure to enter the interpreter region is a + * fatal system error. Used in conjuction with + * relinquish_interpreter + * + ******************************************************************************/ + +void acpi_ex_reacquire_interpreter(void) +{ + ACPI_FUNCTION_TRACE(ex_reacquire_interpreter); + + /* + * If the global serialized flag is set, do not release the interpreter, + * since it was not actually released by acpi_ex_relinquish_interpreter. + * This forces the interpreter to be single threaded. + */ + if (!acpi_gbl_all_methods_serialized) { + acpi_ex_enter_interpreter(); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_exit_interpreter + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Exit the interpreter execution region. This is the top level + * routine used to exit the interpreter when all processing has + * been completed. + * + ******************************************************************************/ + +void acpi_ex_exit_interpreter(void) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ex_exit_interpreter); + + status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER); + if (ACPI_FAILURE(status)) { + ACPI_ERROR((AE_INFO, + "Could not release AML Interpreter mutex")); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_relinquish_interpreter + * + * PARAMETERS: None + * + * RETURN: None + * + * DESCRIPTION: Exit the interpreter execution region, from within the + * interpreter - before attempting an operation that will possibly + * block the running thread. + * + * Cases where the interpreter is unlocked internally + * 1) Method to be blocked on a Sleep() AML opcode + * 2) Method to be blocked on an Acquire() AML opcode + * 3) Method to be blocked on a Wait() AML opcode + * 4) Method to be blocked to acquire the global lock + * 5) Method to be blocked waiting to execute a serialized control method + * that is currently executing + * 6) About to invoke a user-installed opregion handler + * + ******************************************************************************/ + +void acpi_ex_relinquish_interpreter(void) +{ + ACPI_FUNCTION_TRACE(ex_relinquish_interpreter); + + /* + * If the global serialized flag is set, do not release the interpreter. + * This forces the interpreter to be single threaded. + */ + if (!acpi_gbl_all_methods_serialized) { + acpi_ex_exit_interpreter(); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_truncate_for32bit_table + * + * PARAMETERS: obj_desc - Object to be truncated + * + * RETURN: none + * + * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is + * 32-bit, as determined by the revision of the DSDT. + * + ******************************************************************************/ + +void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc) +{ + + ACPI_FUNCTION_ENTRY(); + + /* + * Object must be a valid number and we must be executing + * a control method. NS node could be there for AML_INT_NAMEPATH_OP. + */ + if ((!obj_desc) || + (ACPI_GET_DESCRIPTOR_TYPE(obj_desc) != ACPI_DESC_TYPE_OPERAND) || + (ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_INTEGER)) { + return; + } + + if (acpi_gbl_integer_byte_width == 4) { + /* + * We are running a method that exists in a 32-bit ACPI table. + * Truncate the value to 32 bits by zeroing out the upper 32-bit field + */ + obj_desc->integer.value &= (acpi_integer) ACPI_UINT32_MAX; + } +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_acquire_global_lock + * + * PARAMETERS: field_flags - Flags with Lock rule: + * always_lock or never_lock + * + * RETURN: None + * + * DESCRIPTION: Obtain the ACPI hardware Global Lock, only if the field + * flags specifiy that it is to be obtained before field access. + * + ******************************************************************************/ + +void acpi_ex_acquire_global_lock(u32 field_flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ex_acquire_global_lock); + + /* Only use the lock if the always_lock bit is set */ + + if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) { + return_VOID; + } + + /* Attempt to get the global lock, wait forever */ + + status = acpi_ex_acquire_mutex_object(ACPI_WAIT_FOREVER, + acpi_gbl_global_lock_mutex, + acpi_os_get_thread_id()); + + if (ACPI_FAILURE(status)) { + ACPI_EXCEPTION((AE_INFO, status, + "Could not acquire Global Lock")); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_release_global_lock + * + * PARAMETERS: field_flags - Flags with Lock rule: + * always_lock or never_lock + * + * RETURN: None + * + * DESCRIPTION: Release the ACPI hardware Global Lock + * + ******************************************************************************/ + +void acpi_ex_release_global_lock(u32 field_flags) +{ + acpi_status status; + + ACPI_FUNCTION_TRACE(ex_release_global_lock); + + /* Only use the lock if the always_lock bit is set */ + + if (!(field_flags & AML_FIELD_LOCK_RULE_MASK)) { + return_VOID; + } + + /* Release the global lock */ + + status = acpi_ex_release_mutex_object(acpi_gbl_global_lock_mutex); + if (ACPI_FAILURE(status)) { + + /* Report the error, but there isn't much else we can do */ + + ACPI_EXCEPTION((AE_INFO, status, + "Could not release Global Lock")); + } + + return_VOID; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_digits_needed + * + * PARAMETERS: Value - Value to be represented + * Base - Base of representation + * + * RETURN: The number of digits. + * + * DESCRIPTION: Calculate the number of digits needed to represent the Value + * in the given Base (Radix) + * + ******************************************************************************/ + +static u32 acpi_ex_digits_needed(acpi_integer value, u32 base) +{ + u32 num_digits; + acpi_integer current_value; + + ACPI_FUNCTION_TRACE(ex_digits_needed); + + /* acpi_integer is unsigned, so we don't worry about a '-' prefix */ + + if (value == 0) { + return_UINT32(1); + } + + current_value = value; + num_digits = 0; + + /* Count the digits in the requested base */ + + while (current_value) { + (void)acpi_ut_short_divide(current_value, base, ¤t_value, + NULL); + num_digits++; + } + + return_UINT32(num_digits); +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_eisa_id_to_string + * + * PARAMETERS: numeric_id - EISA ID to be converted + * out_string - Where to put the converted string (8 bytes) + * + * RETURN: None + * + * DESCRIPTION: Convert a numeric EISA ID to string representation + * + ******************************************************************************/ + +void acpi_ex_eisa_id_to_string(u32 numeric_id, char *out_string) +{ + u32 eisa_id; + + ACPI_FUNCTION_ENTRY(); + + /* Swap ID to big-endian to get contiguous bits */ + + eisa_id = acpi_ut_dword_byte_swap(numeric_id); + + out_string[0] = (char)('@' + (((unsigned long)eisa_id >> 26) & 0x1f)); + out_string[1] = (char)('@' + ((eisa_id >> 21) & 0x1f)); + out_string[2] = (char)('@' + ((eisa_id >> 16) & 0x1f)); + out_string[3] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 12); + out_string[4] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 8); + out_string[5] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 4); + out_string[6] = acpi_ut_hex_to_ascii_char((acpi_integer) eisa_id, 0); + out_string[7] = 0; +} + +/******************************************************************************* + * + * FUNCTION: acpi_ex_unsigned_integer_to_string + * + * PARAMETERS: Value - Value to be converted + * out_string - Where to put the converted string (8 bytes) + * + * RETURN: None, string + * + * DESCRIPTION: Convert a number to string representation. Assumes string + * buffer is large enough to hold the string. + * + ******************************************************************************/ + +void acpi_ex_unsigned_integer_to_string(acpi_integer value, char *out_string) +{ + u32 count; + u32 digits_needed; + u32 remainder; + + ACPI_FUNCTION_ENTRY(); + + digits_needed = acpi_ex_digits_needed(value, 10); + out_string[digits_needed] = 0; + + for (count = digits_needed; count > 0; count--) { + (void)acpi_ut_short_divide(value, 10, &value, &remainder); + out_string[count - 1] = (char)('0' + remainder); + } +} + +#endif |