aboutsummaryrefslogtreecommitdiff
path: root/drivers/acpi/acpica/evgpeinit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/acpi/acpica/evgpeinit.c')
-rw-r--r--drivers/acpi/acpica/evgpeinit.c94
1 files changed, 43 insertions, 51 deletions
diff --git a/drivers/acpi/acpica/evgpeinit.c b/drivers/acpi/acpica/evgpeinit.c
index 3084c5de1bb..49fc7effd96 100644
--- a/drivers/acpi/acpica/evgpeinit.c
+++ b/drivers/acpi/acpica/evgpeinit.c
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2010, Intel Corp.
+ * Copyright (C) 2000 - 2014, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
@@ -45,10 +45,26 @@
#include "accommon.h"
#include "acevents.h"
#include "acnamesp.h"
-#include "acinterp.h"
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evgpeinit")
+#if (!ACPI_REDUCED_HARDWARE) /* Entire module */
+/*
+ * Note: History of _PRW support in ACPICA
+ *
+ * Originally (2000 - 2010), the GPE initialization code performed a walk of
+ * the entire namespace to execute the _PRW methods and detect all GPEs
+ * capable of waking the system.
+ *
+ * As of 10/2010, the _PRW method execution has been removed since it is
+ * actually unnecessary. The host OS must in fact execute all _PRW methods
+ * in order to identify the device/power-resource dependencies. We now put
+ * the onus on the host OS to identify the wake GPEs as part of this process
+ * and to inform ACPICA of these GPEs via the acpi_setup_gpe_for_wake interface. This
+ * not only reduces the complexity of the ACPICA initialization code, but in
+ * some cases (on systems with very large namespaces) it should reduce the
+ * kernel boot time as well.
+ */
/*******************************************************************************
*
@@ -70,6 +86,9 @@ acpi_status acpi_ev_gpe_initialize(void)
ACPI_FUNCTION_TRACE(ev_gpe_initialize);
+ ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
+ "Initializing General Purpose Events (GPEs):\n"));
+
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
@@ -106,15 +125,16 @@ acpi_status acpi_ev_gpe_initialize(void)
/* GPE block 0 exists (has both length and address > 0) */
register_count0 = (u16)(acpi_gbl_FADT.gpe0_block_length / 2);
-
gpe_number_max =
(register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
/* Install GPE Block 0 */
status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
- &acpi_gbl_FADT.xgpe0_block,
- register_count0, 0,
+ acpi_gbl_FADT.xgpe0_block.
+ address,
+ acpi_gbl_FADT.xgpe0_block.
+ space_id, register_count0, 0,
acpi_gbl_FADT.sci_interrupt,
&acpi_gbl_gpe_fadt_blocks[0]);
@@ -151,8 +171,10 @@ acpi_status acpi_ev_gpe_initialize(void)
status =
acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
- &acpi_gbl_FADT.xgpe1_block,
- register_count1,
+ acpi_gbl_FADT.xgpe1_block.
+ address,
+ acpi_gbl_FADT.xgpe1_block.
+ space_id, register_count1,
acpi_gbl_FADT.gpe1_base,
acpi_gbl_FADT.
sci_interrupt,
@@ -185,17 +207,7 @@ acpi_status acpi_ev_gpe_initialize(void)
goto cleanup;
}
- /* Check for Max GPE number out-of-range */
-
- if (gpe_number_max > ACPI_GPE_MAX) {
- ACPI_ERROR((AE_INFO,
- "Maximum GPE number from FADT is too large: 0x%X",
- gpe_number_max));
- status = AE_BAD_VALUE;
- goto cleanup;
- }
-
- cleanup:
+cleanup:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return_ACPI_STATUS(AE_OK);
}
@@ -210,8 +222,7 @@ acpi_status acpi_ev_gpe_initialize(void)
*
* DESCRIPTION: Check for new GPE methods (_Lxx/_Exx) made available as a
* result of a Load() or load_table() operation. If new GPE
- * methods have been installed, register the new methods and
- * enable and runtime GPEs that are associated with them.
+ * methods have been installed, register the new methods.
*
******************************************************************************/
@@ -223,7 +234,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
acpi_status status = AE_OK;
/*
- * 2) Find any _Lxx/_Exx GPE methods that have just been loaded.
+ * Find any _Lxx/_Exx GPE methods that have just been loaded.
*
* Any GPEs that correspond to new _Lxx/_Exx methods are immediately
* enabled.
@@ -236,10 +247,9 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
return;
}
+ walk_info.count = 0;
walk_info.owner_id = table_owner_id;
walk_info.execute_by_owner_id = TRUE;
- walk_info.count = 0;
- walk_info.enable_this_gpe = TRUE;
/* Walk the interrupt level descriptor list */
@@ -300,9 +310,7 @@ void acpi_ev_update_gpes(acpi_owner_id table_owner_id)
* xx - is the GPE number [in HEX]
*
* If walk_info->execute_by_owner_id is TRUE, we only execute examine GPE methods
- * with that owner.
- * If walk_info->enable_this_gpe is TRUE, the GPE that is referred to by a GPE
- * method is immediately enabled (Used for Load/load_table operators)
+ * with that owner.
*
******************************************************************************/
@@ -315,8 +323,6 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
struct acpi_gpe_walk_info *walk_info =
ACPI_CAST_PTR(struct acpi_gpe_walk_info, context);
struct acpi_gpe_event_info *gpe_event_info;
- struct acpi_namespace_node *gpe_device;
- acpi_status status;
u32 gpe_number;
char name[ACPI_NAME_SIZE + 1];
u8 type;
@@ -350,14 +356,17 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
*/
switch (name[1]) {
case 'L':
+
type = ACPI_GPE_LEVEL_TRIGGERED;
break;
case 'E':
+
type = ACPI_GPE_EDGE_TRIGGERED;
break;
default:
+
/* Unknown method type, just ignore it */
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
@@ -414,38 +423,21 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
return_ACPI_STATUS(AE_OK);
}
+ /* Disable the GPE in case it's been enabled already. */
+ (void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+
/*
* Add the GPE information from above to the gpe_event_info block for
* use during dispatch of this GPE.
*/
+ gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
gpe_event_info->dispatch.method_node = method_node;
- /*
- * Enable this GPE if requested. This only happens when during the
- * execution of a Load or load_table operator. We have found a new
- * GPE method and want to immediately enable the GPE if it is a
- * runtime GPE.
- */
- if (walk_info->enable_this_gpe) {
-
- walk_info->count++;
- gpe_device = walk_info->gpe_device;
-
- if (gpe_device == acpi_gbl_fadt_gpe_device) {
- gpe_device = NULL;
- }
-
- status = acpi_enable_gpe(gpe_device, gpe_number);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not enable GPE 0x%02X",
- gpe_number));
- }
- }
-
ACPI_DEBUG_PRINT((ACPI_DB_LOAD,
"Registered GPE method %s as GPE number 0x%.2X\n",
name, gpe_number));
return_ACPI_STATUS(AE_OK);
}
+
+#endif /* !ACPI_REDUCED_HARDWARE */
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-12-09 15:13:10 +0000