diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/ia64/sn/kernel/io_init.c | 2 | ||||
| -rw-r--r-- | arch/ia64/sn/pci/Makefile | 2 | ||||
| -rw-r--r-- | arch/ia64/sn/pci/tioca_provider.c | 668 |
3 files changed, 671 insertions, 1 deletions
diff --git a/arch/ia64/sn/kernel/io_init.c b/arch/ia64/sn/kernel/io_init.c index 9f9d0464f72..18160a06a8c 100644 --- a/arch/ia64/sn/kernel/io_init.c +++ b/arch/ia64/sn/kernel/io_init.c @@ -19,6 +19,7 @@ #include "xtalk/hubdev.h" #include <asm/sn/io.h> #include <asm/sn/simulator.h> +#include <asm/sn/tioca_provider.h> char master_baseio_wid; nasid_t master_nasid = INVALID_NASID; /* Partition Master */ @@ -393,6 +394,7 @@ static int __init sn_pci_init(void) sn_pci_provider[i] = &sn_pci_default_provider; pcibr_init_provider(); + tioca_init_provider(); /* * This is needed to avoid bounce limit checks in the blk layer diff --git a/arch/ia64/sn/pci/Makefile b/arch/ia64/sn/pci/Makefile index b5dca0097a8..2f915bce25f 100644 --- a/arch/ia64/sn/pci/Makefile +++ b/arch/ia64/sn/pci/Makefile @@ -7,4 +7,4 @@ # # Makefile for the sn pci general routines. -obj-y := pci_dma.o pcibr/ +obj-y := pci_dma.o tioca_provider.o pcibr/ diff --git a/arch/ia64/sn/pci/tioca_provider.c b/arch/ia64/sn/pci/tioca_provider.c new file mode 100644 index 00000000000..2234d61cdd4 --- /dev/null +++ b/arch/ia64/sn/pci/tioca_provider.c @@ -0,0 +1,668 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. + */ + +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <asm/sn/sn_sal.h> +#include <asm/sn/addrs.h> +#include <asm/sn/pcidev.h> +#include <asm/sn/pcibus_provider_defs.h> +#include <asm/sn/tioca_provider.h> + +uint32_t tioca_gart_found; +EXPORT_SYMBOL(tioca_gart_found); /* used by agp-sgi */ + +LIST_HEAD(tioca_list); +EXPORT_SYMBOL(tioca_list); /* used by agp-sgi */ + +static int tioca_gart_init(struct tioca_kernel *); + +/** + * tioca_gart_init - Initialize SGI TIOCA GART + * @tioca_common: ptr to common prom/kernel struct identifying the + * + * If the indicated tioca has devices present, initialize its associated + * GART MMR's and kernel memory. + */ +static int +tioca_gart_init(struct tioca_kernel *tioca_kern) +{ + uint64_t ap_reg; + uint64_t offset; + struct page *tmp; + struct tioca_common *tioca_common; + volatile struct tioca *ca_base; + + tioca_common = tioca_kern->ca_common; + ca_base = (struct tioca *)tioca_common->ca_common.bs_base; + + if (list_empty(tioca_kern->ca_devices)) + return 0; + + ap_reg = 0; + + /* + * Validate aperature size + */ + + switch (CA_APERATURE_SIZE >> 20) { + case 4: + ap_reg |= (0x3ff << CA_GART_AP_SIZE_SHFT); /* 4MB */ + break; + case 8: + ap_reg |= (0x3fe << CA_GART_AP_SIZE_SHFT); /* 8MB */ + break; + case 16: + ap_reg |= (0x3fc << CA_GART_AP_SIZE_SHFT); /* 16MB */ + break; + case 32: + ap_reg |= (0x3f8 << CA_GART_AP_SIZE_SHFT); /* 32 MB */ + break; + case 64: + ap_reg |= (0x3f0 << CA_GART_AP_SIZE_SHFT); /* 64 MB */ + break; + case 128: + ap_reg |= (0x3e0 << CA_GART_AP_SIZE_SHFT); /* 128 MB */ + break; + case 256: + ap_reg |= (0x3c0 << CA_GART_AP_SIZE_SHFT); /* 256 MB */ + break; + case 512: + ap_reg |= (0x380 << CA_GART_AP_SIZE_SHFT); /* 512 MB */ + break; + case 1024: + ap_reg |= (0x300 << CA_GART_AP_SIZE_SHFT); /* 1GB */ + break; + case 2048: + ap_reg |= (0x200 << CA_GART_AP_SIZE_SHFT); /* 2GB */ + break; + case 4096: + ap_reg |= (0x000 << CA_GART_AP_SIZE_SHFT); /* 4 GB */ + break; + default: + printk(KERN_ERR "%s: Invalid CA_APERATURE_SIZE " + "0x%lx\n", __FUNCTION__, (ulong) CA_APERATURE_SIZE); + return -1; + } + + /* + * Set up other aperature parameters + */ + + if (PAGE_SIZE >= 16384) { + tioca_kern->ca_ap_pagesize = 16384; + ap_reg |= CA_GART_PAGE_SIZE; + } else { + tioca_kern->ca_ap_pagesize = 4096; + } + + tioca_kern->ca_ap_size = CA_APERATURE_SIZE; + tioca_kern->ca_ap_bus_base = CA_APERATURE_BASE; + tioca_kern->ca_gart_entries = + tioca_kern->ca_ap_size / tioca_kern->ca_ap_pagesize; + + ap_reg |= (CA_GART_AP_ENB_AGP | CA_GART_AP_ENB_PCI); + ap_reg |= tioca_kern->ca_ap_bus_base; + + /* + * Allocate and set up the GART + */ + + tioca_kern->ca_gart_size = tioca_kern->ca_gart_entries * sizeof(u64); + tmp = + alloc_pages_node(tioca_kern->ca_closest_node, + GFP_KERNEL | __GFP_ZERO, + get_order(tioca_kern->ca_gart_size)); + + if (!tmp) { + printk(KERN_ERR "%s: Could not allocate " + "%lu bytes (order %d) for GART\n", + __FUNCTION__, + tioca_kern->ca_gart_size, + get_order(tioca_kern->ca_gart_size)); + return -ENOMEM; + } + + tioca_kern->ca_gart = page_address(tmp); + tioca_kern->ca_gart_coretalk_addr = + PHYS_TO_TIODMA(virt_to_phys(tioca_kern->ca_gart)); + + /* + * Compute PCI/AGP convenience fields + */ + + offset = CA_PCI32_MAPPED_BASE - CA_APERATURE_BASE; + tioca_kern->ca_pciap_base = CA_PCI32_MAPPED_BASE; + tioca_kern->ca_pciap_size = CA_PCI32_MAPPED_SIZE; + tioca_kern->ca_pcigart_start = offset / tioca_kern->ca_ap_pagesize; + tioca_kern->ca_pcigart_base = + tioca_kern->ca_gart_coretalk_addr + offset; + tioca_kern->ca_pcigart = + &tioca_kern->ca_gart[tioca_kern->ca_pcigart_start]; + tioca_kern->ca_pcigart_entries = + tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize; + tioca_kern->ca_pcigart_pagemap = + kcalloc(1, tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL); + if (!tioca_kern->ca_pcigart_pagemap) { + free_pages((unsigned long)tioca_kern->ca_gart, + get_order(tioca_kern->ca_gart_size)); + return -1; + } + + offset = CA_AGP_MAPPED_BASE - CA_APERATURE_BASE; + tioca_kern->ca_gfxap_base = CA_AGP_MAPPED_BASE; + tioca_kern->ca_gfxap_size = CA_AGP_MAPPED_SIZE; + tioca_kern->ca_gfxgart_start = offset / tioca_kern->ca_ap_pagesize; + tioca_kern->ca_gfxgart_base = + tioca_kern->ca_gart_coretalk_addr + offset; + tioca_kern->ca_gfxgart = + &tioca_kern->ca_gart[tioca_kern->ca_gfxgart_start]; + tioca_kern->ca_gfxgart_entries = + tioca_kern->ca_gfxap_size / tioca_kern->ca_ap_pagesize; + + /* + * various control settings: + * use agp op-combining + * use GET semantics to fetch memory + * participate in coherency domain + * prefetch TLB entries + */ + + ca_base->ca_control1 |= CA_AGPDMA_OP_ENB_COMBDELAY; /* PV895469 ? */ + ca_base->ca_control2 &= ~(CA_GART_MEM_PARAM); + ca_base->ca_control2 |= (0x2ull << CA_GART_MEM_PARAM_SHFT); + tioca_kern->ca_gart_iscoherent = 1; + ca_base->ca_control2 |= + (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB); + + /* + * Unmask GART fetch error interrupts. Clear residual errors first. + */ + + ca_base->ca_int_status_alias = CA_GART_FETCH_ERR; + ca_base->ca_mult_error_alias = CA_GART_FETCH_ERR; + ca_base->ca_int_mask &= ~CA_GART_FETCH_ERR; + + /* + * Program the aperature and gart registers in TIOCA + */ + + ca_base->ca_gart_aperature = ap_reg; + ca_base->ca_gart_ptr_table = tioca_kern->ca_gart_coretalk_addr | 1; + + return 0; +} + +/** + * tioca_fastwrite_enable - enable AGP FW for a tioca and its functions + * @tioca_kernel: structure representing the CA + * + * Given a CA, scan all attached functions making sure they all support + * FastWrite. If so, enable FastWrite for all functions and the CA itself. + */ + +void +tioca_fastwrite_enable(struct tioca_kernel *tioca_kern) +{ + int cap_ptr; + uint64_t ca_control1; + uint32_t reg; + struct tioca *tioca_base; + struct pci_dev *pdev; + struct tioca_common *common; + + common = tioca_kern->ca_common; + + /* + * Scan all vga controllers on this bus making sure they all + * suport FW. If not, return. + */ + + list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) { + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8)) + continue; + + cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); + if (!cap_ptr) + return; /* no AGP CAP means no FW */ + + pci_read_config_dword(pdev, cap_ptr + PCI_AGP_STATUS, ®); + if (!(reg & PCI_AGP_STATUS_FW)) + return; /* function doesn't support FW */ + } + + /* + * Set fw for all vga fn's + */ + + list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) { + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8)) + continue; + + cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP); + pci_read_config_dword(pdev, cap_ptr + PCI_AGP_COMMAND, ®); + reg |= PCI_AGP_COMMAND_FW; + pci_write_config_dword(pdev, cap_ptr + PCI_AGP_COMMAND, reg); + } + + /* + * Set ca's fw to match + */ + + tioca_base = (struct tioca *)common->ca_common.bs_base; + ca_control1 = tioca_base->ca_control1; + ca_control1 |= CA_AGP_FW_ENABLE; + tioca_base->ca_control1 = ca_control1; +} + +EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */ + +/** + * tioca_dma_d64 - create a DMA mapping using 64-bit direct mode + * @paddr: system physical address + * + * Map @paddr into 64-bit CA bus space. No device context is necessary. + * Bits 53:0 come from the coretalk address. We just need to mask in the + * following optional bits of the 64-bit pci address: + * + * 63:60 - Coretalk Packet Type - 0x1 for Mem Get/Put (coherent) + * 0x2 for PIO (non-coherent) + * We will always use 0x1 + * 55:55 - Swap bytes Currently unused + */ +static uint64_t +tioca_dma_d64(unsigned long paddr) +{ + dma_addr_t bus_addr; + + bus_addr = PHYS_TO_TIODMA(paddr); + + BUG_ON(!bus_addr); + BUG_ON(bus_addr >> 54); + + /* Set upper nibble to Cache Coherent Memory op */ + bus_addr |= (1UL << 60); + + return bus_addr; +} + +/** + * tioca_dma_d48 - create a DMA mapping using 48-bit direct mode + * @pdev: linux pci_dev representing the function + * @paddr: system physical address + * + * Map @paddr into 64-bit bus space of the CA associated with @pcidev_info. + * + * The CA agp 48 bit direct address falls out as follows: + * + * When direct mapping AGP addresses, the 48 bit AGP address is + * constructed as follows: + * + * [47:40] - Low 8 bits of the page Node ID extracted from coretalk + * address [47:40]. The upper 8 node bits are fixed + * and come from the xxx register bits [5:0] + * [39:38] - Chiplet ID extracted from coretalk address [39:38] + * [37:00] - node offset extracted from coretalk address [37:00] + * + * Since the node id in general will be non-zero, and the chiplet id + * will always be non-zero, it follows that the device must support + * a dma mask of at least 0xffffffffff (40 bits) to target node 0 + * and in general should be 0xffffffffffff (48 bits) to target nodes + * up to 255. Nodes above 255 need the support of the xxx register, + * and so a given CA can only directly target nodes in the range + * xxx - xxx+255. + */ +static uint64_t +tioca_dma_d48(struct pci_dev *pdev, uint64_t paddr) +{ + struct tioca_common *tioca_common; + struct tioca *ca_base; + uint64_t ct_addr; + dma_addr_t bus_addr; + uint32_t node_upper; + uint64_t agp_dma_extn; + struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev); + + tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info; + ca_base = (struct tioca *)tioca_common->ca_common.bs_base; + + ct_addr = PHYS_TO_TIODMA(paddr); + if (!ct_addr) + return 0; + + bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffff); + node_upper = ct_addr >> 48; + + if (node_upper > 64) { + printk(KERN_ERR "%s: coretalk addr 0x%p node id out " + "of range\n", __FUNCTION__, (void *)ct_addr); + return 0; + } + + agp_dma_extn = ca_base->ca_agp_dma_addr_extn; + if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) { + printk(KERN_ERR "%s: coretalk upper node (%u) " + "mismatch with ca_agp_dma_addr_extn (%lu)\n", + __FUNCTION__, + node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)); + return 0; + } + + return bus_addr; +} + +/** + * tioca_dma_mapped - create a DMA mapping using a CA GART + * @pdev: linux pci_dev representing the function + * @paddr: host physical address to map + * @req_size: len (bytes) to map + * + * Map @paddr into CA address space using the GART mechanism. The mapped + * dma_addr_t is guarenteed to be contiguous in CA bus space. + */ +static dma_addr_t +tioca_dma_mapped(struct pci_dev *pdev, uint64_t paddr, size_t req_size) +{ + int i, ps, ps_shift, entry, entries, mapsize, last_entry; + uint64_t xio_addr, end_xio_addr; + struct tioca_common *tioca_common; + struct tioca_kernel *tioca_kern; + dma_addr_t bus_addr = 0; + struct tioca_dmamap *ca_dmamap; + void *map; + unsigned long flags; + struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);; + + tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info; + tioca_kern = (struct tioca_kernel *)tioca_common->ca_kernel_private; + + xio_addr = PHYS_TO_TIODMA(paddr); + if (!xio_addr) + return 0; + + spin_lock_irqsave(&tioca_kern->ca_lock, flags); + + /* + * allocate a map struct + */ + + ca_dmamap = kcalloc(1, sizeof(struct tioca_dmamap), GFP_ATOMIC); + if (!ca_dmamap) + goto map_return; + + /* + * Locate free entries that can hold req_size. Account for + * unaligned start/length when allocating. + */ + + ps = tioca_kern->ca_ap_pagesize; /* will be power of 2 */ + ps_shift = ffs(ps) - 1; + end_xio_addr = xio_addr + req_size - 1; + + entries = (end_xio_addr >> ps_shift) - (xio_addr >> ps_shift) + 1; + + map = tioca_kern->ca_pcigart_pagemap; + mapsize = tioca_kern->ca_pcigart_entries; + + entry = find_first_zero_bit(map, mapsize); + while (entry < mapsize) { + last_entry = find_next_bit(map, mapsize, entry); + + if (last_entry - entry >= entries) + break; + + entry = find_next_zero_bit(map, mapsize, last_entry); + } + + if (entry > mapsize) + goto map_return; + + for (i = 0; i < entries; i++) + set_bit(entry + i, map); + + bus_addr = tioca_kern->ca_pciap_base + (entry * ps); + + ca_dmamap->cad_dma_addr = bus_addr; + ca_dmamap->cad_gart_size = entries; + ca_dmamap->cad_gart_entry = entry; + list_add(&ca_dmamap->cad_list, &tioca_kern->ca_list); + + if (xio_addr % ps) { + tioca_kern->ca_pcigart[entry] = tioca_paddr_to_gart(xio_addr); + bus_addr += xio_addr & (ps - 1); + xio_addr &= ~(ps - 1); + xio_addr += ps; + entry++; + } + + while (xio_addr < end_xio_addr) { + tioca_kern->ca_pcigart[entry] = tioca_paddr_to_gart(xio_addr); + xio_addr += ps; + entry++; + } + + tioca_tlbflush(tioca_kern); + +map_return: + spin_unlock_irqrestore(&tioca_kern->ca_lock, flags); + return bus_addr; +} + +/** + * tioca_dma_unmap - release CA mapping resources + * @pdev: linux pci_dev representing the function + * @bus_addr: bus address returned by an earlier tioca_dma_map + * @dir: mapping direction (unused) + * + * Locate mapping resources associated with @bus_addr and release them. + * For mappings created using the direct modes (64 or 48) there are no + * resources to release. + */ +void +tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) +{ + int i, entry; + struct tioca_common *tioca_common; + struct tioca_kernel *tioca_kern; + struct tioca_dmamap *map; + struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev); + unsigned long flags; + + tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info; + tioca_kern = (struct tioca_kernel *)tioca_common->ca_kernel_private; + + /* return straight away if this isn't be a mapped address */ + + if (bus_addr < tioca_kern->ca_pciap_base || + bus_addr >= (tioca_kern->ca_pciap_base + tioca_kern->ca_pciap_size)) + return; + + spin_lock_irqsave(&tioca_kern->ca_lock, flags); + + list_for_each_entry(map, &tioca_kern->ca_dmamaps, cad_list) + if (map->cad_dma_addr == bus_addr) + break; + + BUG_ON(map == NULL); + + entry = map->cad_gart_entry; + + for (i = 0; i < map->cad_gart_size; i++, entry++) { + clear_bit(entry, tioca_kern->ca_pcigart_pagemap); + tioca_kern->ca_pcigart[entry] = 0; + } + tioca_tlbflush(tioca_kern); + + list_del(&map->cad_list); + spin_unlock_irqrestore(&tioca_kern->ca_lock, flags); + kfree(map); +} + +/** + * tioca_dma_map - map pages for PCI DMA + * @pdev: linux pci_dev representing the function + * @paddr: host physical address to map + * @byte_count: bytes to map + * + * This is the main wrapper for mapping host physical pages to CA PCI space. + * The mapping mode used is based on the devices dma_mask. As a last resort + * use the GART mapped mode. + */ +uint64_t +tioca_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) +{ + uint64_t mapaddr; + + /* + * If card is 64 or 48 bit addresable, use a direct mapping. 32 + * bit direct is so restrictive w.r.t. where the memory resides that + * we don't use it even though CA has some support. + */ + + if (pdev->dma_mask == ~0UL) + mapaddr = tioca_dma_d64(paddr); + else if (pdev->dma_mask == 0xffffffffffffUL) + mapaddr = tioca_dma_d48(pdev, paddr); + else + mapaddr = 0; + + /* Last resort ... use PCI portion of CA GART */ + + if (mapaddr == 0) + mapaddr = tioca_dma_mapped(pdev, paddr, byte_count); + + return mapaddr; +} + +/** + * tioca_error_intr_handler - SGI TIO CA error interrupt handler + * @irq: unused + * @arg: pointer to tioca_common struct for the given CA + * @pt: unused + * + * Handle a CA error interrupt. Simply a wrapper around a SAL call which + * defers processing to the SGI prom. + */ +static irqreturn_t +tioca_error_intr_handler(int irq, void *arg, struct pt_regs *pt) +{ + struct tioca_common *soft = arg; + struct ia64_sal_retval ret_stuff; + uint64_t segment; + uint64_t busnum; + ret_stuff.status = 0; + ret_stuff.v0 = 0; + + segment = 0; + busnum = soft->ca_common.bs_persist_busnum; + + SAL_CALL_NOLOCK(ret_stuff, + (u64) SN_SAL_IOIF_ERROR_INTERRUPT, + segment, busnum, 0, 0, 0, 0, 0); + + return IRQ_HANDLED; +} + +/** + * tioca_bus_fixup - perform final PCI fixup for a TIO CA bus + * @prom_bussoft: Common prom/kernel struct representing the bus + * + * Replicates the tioca_common pointed to by @prom_bussoft in kernel + * space. Allocates and initializes a kernel-only area for a given CA, + * and sets up an irq for handling CA error interrupts. + * + * On successful setup, returns the kernel version of tioca_common back to + * the caller. + */ +void * +tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft) +{ + struct tioca_common *tioca_common; + struct tioca_kernel *tioca_kern; + struct pci_bus *bus; + + /* sanity check prom rev */ + + if (sn_sal_rev_major() < 4 || + (sn_sal_rev_major() == 4 && sn_sal_rev_minor() < 6)) { + printk + (KERN_ERR "%s: SGI prom rev 4.06 or greater required " + "for tioca support\n", __FUNCTION__); + return NULL; + } + + /* + * Allocate kernel bus soft and copy from prom. + */ + + tioca_common = kcalloc(1, sizeof(struct tioca_common), GFP_KERNEL); + if (!tioca_common) + return NULL; + + memcpy(tioca_common, prom_bussoft, sizeof(struct tioca_common)); + tioca_common->ca_common.bs_base |= __IA64_UNCACHED_OFFSET; + + /* init kernel-private area */ + + tioca_kern = kcalloc(1, sizeof(struct tioca_kernel), GFP_KERNEL); + if (!tioca_kern) { + kfree(tioca_common); + return NULL; + } + + tioca_kern->ca_common = tioca_common; + spin_lock_init(&tioca_kern->ca_lock); + INIT_LIST_HEAD(&tioca_kern->ca_dmamaps); + tioca_kern->ca_closest_node = + nasid_to_cnodeid(tioca_common->ca_closest_nasid); + tioca_common->ca_kernel_private = (uint64_t) tioca_kern; + + bus = pci_find_bus(0, tioca_common->ca_common.bs_persist_busnum); + BUG_ON(!bus); + tioca_kern->ca_devices = &bus->devices; + + /* init GART */ + + if (tioca_gart_init(tioca_kern) < 0) { + kfree(tioca_kern); + kfree(tioca_common); + return NULL; + } + + tioca_gart_found++; + list_add(&tioca_kern->ca_list, &tioca_list); + + if (request_irq(SGI_TIOCA_ERROR, + tioca_error_intr_handler, + SA_SHIRQ, "TIOCA error", (void *)tioca_common)) + printk(KERN_WARNING + "%s: Unable to get irq %d. " + "Error interrupts won't be routed for TIOCA bus %d\n", + __FUNCTION__, SGI_TIOCA_ERROR, + (int)tioca_common->ca_common.bs_persist_busnum); + + return tioca_common; +} + +static struct sn_pcibus_provider tioca_pci_interfaces = { + .dma_map = tioca_dma_map, + .dma_map_consistent = tioca_dma_map, + .dma_unmap = tioca_dma_unmap, + .bus_fixup = tioca_bus_fixup, +}; + +/** + * tioca_init_provider - init SN PCI provider ops for TIO CA + */ +int +tioca_init_provider(void) +{ + sn_pci_provider[PCIIO_ASIC_TYPE_TIOCA] = &tioca_pci_interfaces; + return 0; +} |