diff options
Diffstat (limited to 'arch')
20 files changed, 2972 insertions, 137 deletions
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 4c704b4e8b3..a87f26121db 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -7,6 +7,7 @@ config ARCH_SH7367 select CPU_V6 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7377 @@ -14,6 +15,7 @@ config ARCH_SH7377 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS config ARCH_SH7372 @@ -21,6 +23,7 @@ config ARCH_SH7372 select CPU_V7 select HAVE_CLK select COMMON_CLKDEV + select SH_CLK_CPG select GENERIC_CLOCKEVENTS comment "SH-Mobile Board Type" @@ -39,6 +42,7 @@ config MACH_AP4EVB bool "AP4EVB board" depends on ARCH_SH7372 select ARCH_REQUIRE_GPIOLIB + select SH_LCD_MIPI_DSI comment "SH-Mobile System Configuration" @@ -88,6 +92,15 @@ config SH_TIMER_CMT help This enables build of the CMT timer driver. +config SH_TIMER_TMU + bool "TMU timer driver" + default y + help + This enables build of the TMU timer driver. + endmenu +config SH_CLK_CPG + bool + endif diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile index 6d385d371c3..5e16b4c6922 100644 --- a/arch/arm/mach-shmobile/Makefile +++ b/arch/arm/mach-shmobile/Makefile @@ -3,12 +3,12 @@ # # Common objects -obj-y := timer.o console.o +obj-y := timer.o console.o clock.o # CPU objects obj-$(CONFIG_ARCH_SH7367) += setup-sh7367.o clock-sh7367.o intc-sh7367.o -obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7367.o intc-sh7377.o -obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7367.o intc-sh7372.o +obj-$(CONFIG_ARCH_SH7377) += setup-sh7377.o clock-sh7377.o intc-sh7377.o +obj-$(CONFIG_ARCH_SH7372) += setup-sh7372.o clock-sh7372.o intc-sh7372.o # Pinmux setup pfc-$(CONFIG_ARCH_SH7367) := pfc-sh7367.o diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 1c2ec96ce26..5d24d4ec93a 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -17,25 +17,44 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <linux/clk.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/delay.h> +#include <linux/mfd/sh_mobile_sdhi.h> +#include <linux/mmc/host.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> +#include <linux/mmc/host.h> +#include <linux/mmc/sh_mmcif.h> +#include <linux/i2c.h> +#include <linux/i2c/tsc2007.h> #include <linux/io.h> #include <linux/smsc911x.h> +#include <linux/sh_intc.h> +#include <linux/sh_clk.h> #include <linux/gpio.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/usb/r8a66597.h> + +#include <sound/sh_fsi.h> + +#include <video/sh_mobile_lcdc.h> +#include <video/sh_mipi_dsi.h> + #include <mach/common.h> +#include <mach/irqs.h> #include <mach/sh7372.h> + #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> /* * Address Interface BusWidth note @@ -80,12 +99,50 @@ */ /* - * KEYSC + * LCD / IRQ / KEYSC / IrDA + * + * IRQ = IRQ26 (TS), IRQ27 (VIO), IRQ28 (TouchScreen) + * LCD = 2nd LCDC + * + * | SW43 | + * SW3 | ON | OFF | + * -------------+-----------------------+---------------+ + * ON | KEY / IrDA | LCD | + * OFF | KEY / IrDA / IRQ | IRQ | + */ + +/* + * USB + * + * J7 : 1-2 MAX3355E VBUS + * 2-3 DC 5.0V + * + * S39: bit2: off + */ + +/* + * FSI/FSMI * - * SW43 KEYSC - * ------------------------- - * ON enable - * OFF disable + * SW41 : ON : SH-Mobile AP4 Audio Mode + * : OFF : Bluetooth Audio Mode + */ + +/* + * MMC0/SDHI1 (CN7) + * + * J22 : select card voltage + * 1-2 pin : 1.8v + * 2-3 pin : 3.3v + * + * SW1 | SW33 + * | bit1 | bit2 | bit3 | bit4 + * ------------+------+------+------+------- + * MMC0 OFF | OFF | ON | ON | X + * SDHI1 OFF | ON | X | OFF | ON + * + * voltage lebel + * CN7 : 1.8v + * CN12: 3.3v */ /* MTD */ @@ -148,7 +205,7 @@ static struct resource smc911x_resources[] = { .end = 0x16000000 - 1, .flags = IORESOURCE_MEM, }, { - .start = 6, + .start = evt2irq(0x02c0) /* IRQ6A */, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -191,7 +248,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0x0be0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -206,7 +263,52 @@ static struct platform_device keysc_device = { }, }; +/* SH_MMCIF */ +static struct resource sh_mmcif_resources[] = { + [0] = { + .name = "SH_MMCIF", + .start = 0xE6BD0000, + .end = 0xE6BD00FF, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* MMC ERR */ + .start = evt2irq(0x1ac0), + .flags = IORESOURCE_IRQ, + }, + [2] = { + /* MMC NOR */ + .start = evt2irq(0x1ae0), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct sh_mmcif_plat_data sh_mmcif_plat = { + .sup_pclk = 0, + .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, + .caps = MMC_CAP_4_BIT_DATA | + MMC_CAP_8_BIT_DATA | + MMC_CAP_NEEDS_POLL, +}; + +static struct platform_device sh_mmcif_device = { + .name = "sh_mmcif", + .id = 0, + .dev = { + .dma_mask = NULL, + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh_mmcif_plat, + }, + .num_resources = ARRAY_SIZE(sh_mmcif_resources), + .resource = sh_mmcif_resources, +}; + /* SDHI0 */ +static struct sh_mobile_sdhi_info sdhi0_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, +}; + static struct resource sdhi0_resources[] = { [0] = { .name = "SDHI0", @@ -215,7 +317,7 @@ static struct resource sdhi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 96, + .start = evt2irq(0x0e00) /* SDHI0 */, .flags = IORESOURCE_IRQ, }, }; @@ -225,6 +327,206 @@ static struct platform_device sdhi0_device = { .num_resources = ARRAY_SIZE(sdhi0_resources), .resource = sdhi0_resources, .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, +}; + +/* SDHI1 */ +static struct sh_mobile_sdhi_info sdhi1_info = { + .dma_slave_tx = SHDMA_SLAVE_SDHI1_TX, + .dma_slave_rx = SHDMA_SLAVE_SDHI1_RX, + .tmio_ocr_mask = MMC_VDD_165_195, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6860000, + .end = 0xe68601ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e80), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, +}; + +/* USB1 */ +static void usb1_host_port_power(int port, int power) +{ + if (!power) /* only power-on supported for now */ + return; + + /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ + __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); +} + +static struct r8a66597_platdata usb1_host_data = { + .on_chip = 1, + .port_power = usb1_host_port_power, +}; + +static struct resource usb1_host_resources[] = { + [0] = { + .name = "USBHS", + .start = 0xE68B0000, + .end = 0xE68B00E6 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb1_host_device = { + .name = "r8a66597_hcd", + .id = 1, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &usb1_host_data, + }, + .num_resources = ARRAY_SIZE(usb1_host_resources), + .resource = usb1_host_resources, +}; + +static struct sh_mobile_lcdc_info sh_mobile_lcdc_info = { + .clock_source = LCDC_CLK_PERIPHERAL, /* One of interface clocks */ + .ch[0] = { + .chan = LCDC_CHAN_MAINLCD, + .bpp = 16, + .interface_type = RGB24, + .clock_divider = 1, + .flags = LCDC_FLAGS_DWPOL, + .lcd_cfg = { + .name = "R63302(QHD)", + .xres = 544, + .yres = 961, + .left_margin = 72, + .right_margin = 600, + .hsync_len = 16, + .upper_margin = 8, + .lower_margin = 8, + .vsync_len = 2, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT, + }, + .lcd_size_cfg = { + .width = 44, + .height = 79, + }, + } +}; + +static struct resource lcdc_resources[] = { + [0] = { + .name = "LCDC", + .start = 0xfe940000, /* P4-only space */ + .end = 0xfe943fff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = intcs_evt2irq(0x580), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device lcdc_device = { + .name = "sh_mobile_lcdc_fb", + .num_resources = ARRAY_SIZE(lcdc_resources), + .resource = lcdc_resources, + .dev = { + .platform_data = &sh_mobile_lcdc_info, + .coherent_dma_mask = ~0, + }, +}; + +static struct resource mipidsi0_resources[] = { + [0] = { + .start = 0xffc60000, + .end = 0xffc68fff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct sh_mipi_dsi_info mipidsi0_info = { + .data_format = MIPI_RGB888, + .lcd_chan = &sh_mobile_lcdc_info.ch[0], +}; + +static struct platform_device mipidsi0_device = { + .name = "sh-mipi-dsi", + .num_resources = ARRAY_SIZE(mipidsi0_resources), + .resource = mipidsi0_resources, + .id = 0, + .dev = { + .platform_data = &mipidsi0_info, + }, +}; + +/* FSI */ +#define IRQ_FSI evt2irq(0x1840) +#define FSIACKCR 0xE6150018 +static void fsiackcr_init(struct clk *clk) +{ + u32 status = __raw_readl(clk->enable_reg); + + /* use external clock */ + status &= ~0x000000ff; + status |= 0x00000080; + __raw_writel(status, clk->enable_reg); +} + +static struct clk_ops fsiackcr_clk_ops = { + .init = fsiackcr_init, +}; + +static struct clk fsiackcr_clk = { + .ops = &fsiackcr_clk_ops, + .enable_reg = (void __iomem *)FSIACKCR, + .rate = 0, /* unknown */ +}; + +static struct sh_fsi_platform_info fsi_info = { + .porta_flags = SH_FSI_BRS_INV | + SH_FSI_OUT_SLAVE_MODE | + SH_FSI_IN_SLAVE_MODE | + SH_FSI_OFMT(PCM) | + SH_FSI_IFMT(PCM), +}; + +static struct resource fsi_resources[] = { + [0] = { + .name = "FSI", + .start = 0xFE3C0000, + .end = 0xFE3C0400 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FSI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device fsi_device = { + .name = "sh_fsi2", + .id = 0, + .num_resources = ARRAY_SIZE(fsi_resources), + .resource = fsi_resources, + .dev = { + .platform_data = &fsi_info, + }, }; static struct platform_device *ap4evb_devices[] __initdata = { @@ -232,6 +534,38 @@ static struct platform_device *ap4evb_devices[] __initdata = { &smc911x_device, &keysc_device, &sdhi0_device, + &sdhi1_device, + &usb1_host_device, + &lcdc_device, + &mipidsi0_device, + &fsi_device, + &sh_mmcif_device +}; + +/* TouchScreen (Needs SW3 set to OFF) */ +#define IRQ28 evt2irq(0x3380) /* IRQ28A */ +static struct tsc2007_platform_data tsc2007_info = { + .model = 2007, + .x_plate_ohms = 180, +}; + +/* I2C */ +static struct i2c_board_info i2c0_devices[] = { + { + I2C_BOARD_INFO("ak4643", 0x13), + }, +}; + +static struct i2c_board_info i2c1_devices[] = { + { + I2C_BOARD_INFO("r2025sd", 0x32), + }, + { + I2C_BOARD_INFO("tsc2007", 0x48), + .type = "tsc2007", + .platform_data = &tsc2007_info, + .irq = IRQ28, + }, }; static struct map_desc ap4evb_io_desc[] __initdata = { @@ -250,14 +584,71 @@ static void __init ap4evb_map_io(void) { iotable_init(ap4evb_io_desc, ARRAY_SIZE(ap4evb_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7372_add_early_devices(); - sh7367_clock_init(); /* use g3 clocks for now */ shmobile_setup_console(); } +/* This function will disappear when we switch to (runtime) PM */ +static int __init ap4evb_init_display_clk(void) +{ + struct clk *lcdc_clk; + struct clk *dsitx_clk; + int ret; + + lcdc_clk = clk_get(&lcdc_device.dev, "sh_mobile_lcdc_fb.0"); + if (IS_ERR(lcdc_clk)) + return PTR_ERR(lcdc_clk); + + dsitx_clk = clk_get(&mipidsi0_device.dev, "sh-mipi-dsi.0"); + if (IS_ERR(dsitx_clk)) { + ret = PTR_ERR(dsitx_clk); + goto eclkdsitxget; + } + + ret = clk_enable(lcdc_clk); + if (ret < 0) + goto eclklcdcon; + + ret = clk_enable(dsitx_clk); + if (ret < 0) + goto eclkdsitxon; + + return 0; + +eclkdsitxon: + clk_disable(lcdc_clk); +eclklcdcon: + clk_put(dsitx_clk); +eclkdsitxget: + clk_put(lcdc_clk); + + return ret; +} + +device_initcall(ap4evb_init_display_clk); + +/* + * FIXME !! + * + * gpio_no_direction is quick_hack. + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static void __init gpio_no_direction(u32 addr) +{ + __raw_writeb(0x00, addr); +} + +#define GPIO_PORT9CR 0xE6051009 +#define GPIO_PORT10CR 0xE605100A + static void __init ap4evb_init(void) { + struct clk *clk; + sh7372_pinmux_init(); /* enable SCIFA0 */ @@ -318,16 +709,102 @@ static void __init ap4evb_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* enable TouchScreen */ + gpio_request(GPIO_FN_IRQ28_123, NULL); + set_irq_type(IRQ28, IRQ_TYPE_LEVEL_LOW); + + /* MMCIF */ + gpio_request(GPIO_FN_MMCD0_0, NULL); + gpio_request(GPIO_FN_MMCD0_1, NULL); + gpio_request(GPIO_FN_MMCD0_2, NULL); + gpio_request(GPIO_FN_MMCD0_3, NULL); + gpio_request(GPIO_FN_MMCD0_4, NULL); + gpio_request(GPIO_FN_MMCD0_5, NULL); + gpio_request(GPIO_FN_MMCD0_6, NULL); + gpio_request(GPIO_FN_MMCD0_7, NULL); + gpio_request(GPIO_FN_MMCCMD0, NULL); + gpio_request(GPIO_FN_MMCCLK0, NULL); + + /* USB enable */ + gpio_request(GPIO_FN_VBUS0_1, NULL); + gpio_request(GPIO_FN_IDIN_1_18, NULL); + gpio_request(GPIO_FN_PWEN_1_115, NULL); + gpio_request(GPIO_FN_OVCN_1_114, NULL); + gpio_request(GPIO_FN_EXTLP_1, NULL); + gpio_request(GPIO_FN_OVCN2_1, NULL); + + /* setup USB phy */ + __raw_writew(0x8a0a, 0xE6058130); /* USBCR2 */ + + /* enable FSI2 */ + gpio_request(GPIO_FN_FSIAIBT, NULL); + gpio_request(GPIO_FN_FSIAILR, NULL); + gpio_request(GPIO_FN_FSIAISLD, NULL); + gpio_request(GPIO_FN_FSIAOSLD, NULL); + gpio_request(GPIO_PORT161, NULL); + gpio_direction_output(GPIO_PORT161, 0); /* slave */ + + gpio_request(GPIO_PORT9, NULL); + gpio_request(GPIO_PORT10, NULL); + gpio_no_direction(GPIO_PORT9CR); /* FSIAOBT needs no direction */ + gpio_no_direction(GPIO_PORT10CR); /* FSIAOLR needs no direction */ + + /* set SPU2 clock to 119.6 MHz */ + clk = clk_get(NULL, "spu_clk"); + if (!IS_ERR(clk)) { + clk_set_rate(clk, clk_round_rate(clk, 119600000)); + clk_put(clk); + } + + /* change parent of FSI A */ + clk = clk_get(NULL, "fsia_clk"); + if (!IS_ERR(clk)) { + clk_register(&fsiackcr_clk); + clk_set_parent(clk, &fsiackcr_clk); + clk_put(clk); + } + + /* + * set irq priority, to avoid sound chopping + * when NFS rootfs is used + * FSI(3) > SMSC911X(2) + */ + intc_set_priority(IRQ_FSI, 3); + + i2c_register_board_info(0, i2c0_devices, + ARRAY_SIZE(i2c0_devices)); + + i2c_register_board_info(1, i2c1_devices, + ARRAY_SIZE(i2c1_devices)); + + /* SDHI1 */ + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); + sh7372_add_standard_devices(); platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); } +static void __init ap4evb_timer_init(void) +{ + sh7372_clock_init(); + shmobile_timer.init(); +} + +static struct sys_timer ap4evb_timer = { + .init = ap4evb_timer_init, +}; + MACHINE_START(AP4EVB, "ap4evb") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = ap4evb_map_io, .init_irq = sh7372_init_irq, .init_machine = ap4evb_init, - .timer = &shmobile_timer, + .timer = &ap4evb_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g3evm.c b/arch/arm/mach-shmobile/board-g3evm.c index 9247503296c..95ccb949d5d 100644 --- a/arch/arm/mach-shmobile/board-g3evm.c +++ b/arch/arm/mach-shmobile/board-g3evm.c @@ -37,6 +37,15 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> + +/* + * IrDA + * + * S67: 5bit : ON power + * : 6bit : ON remote control + * OFF IrDA + */ static struct mtd_partition nor_flash_partitions[] = { { @@ -91,7 +100,7 @@ static struct platform_device nor_flash_device = { }; /* USBHS */ -void usb_host_port_power(int port, int power) +static void usb_host_port_power(int port, int power) { if (!power) /* only power-on supported for now */ return; @@ -113,7 +122,7 @@ static struct resource usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, + .start = evt2irq(0xa20), /* USBHS_USHI0 */ .flags = IORESOURCE_IRQ, }, }; @@ -153,7 +162,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0xbe0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -209,11 +218,30 @@ static struct platform_device nand_flash_device = { }, }; +static struct resource irda_resources[] = { + [0] = { + .start = 0xE6D00000, + .end = 0xE6D01FD4 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x480), /* IRDA */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device irda_device = { + .name = "sh_irda", + .resource = irda_resources, + .num_resources = ARRAY_SIZE(irda_resources), +}; + static struct platform_device *g3evm_devices[] __initdata = { &nor_flash_device, &usb_host_device, &keysc_device, &nand_flash_device, + &irda_device, }; static struct map_desc g3evm_io_desc[] __initdata = { @@ -232,9 +260,8 @@ static void __init g3evm_map_io(void) { iotable_init(g3evm_io_desc, ARRAY_SIZE(g3evm_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7367_add_early_devices(); - sh7367_clock_init(); shmobile_setup_console(); } @@ -271,9 +298,6 @@ static void __init g3evm_init(void) gpio_request(GPIO_FN_EXTLP, NULL); gpio_request(GPIO_FN_IDIN, NULL); - /* enable clock in SYMSTPCR2 */ - __raw_writel(__raw_readl(0xe6158048) & ~(1 << 22), 0xe6158048); - /* setup USB phy */ __raw_writew(0x0300, 0xe605810a); /* USBCR1 */ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ @@ -318,16 +342,32 @@ static void __init g3evm_init(void) /* FOE, FCDE, FSC on dedicated pins */ __raw_writel(__raw_readl(0xe6158048) & ~(1 << 15), 0xe6158048); + /* IrDA */ + gpio_request(GPIO_FN_IRDA_OUT, NULL); + gpio_request(GPIO_FN_IRDA_IN, NULL); + gpio_request(GPIO_FN_IRDA_FIRSEL, NULL); + set_irq_type(evt2irq(0x480), IRQ_TYPE_LEVEL_LOW); + sh7367_add_standard_devices(); platform_add_devices(g3evm_devices, ARRAY_SIZE(g3evm_devices)); } +static void __init g3evm_timer_init(void) +{ + sh7367_clock_init(); + shmobile_timer.init(); +} + +static struct sys_timer g3evm_timer = { + .init = g3evm_timer_init, +}; + MACHINE_START(G3EVM, "g3evm") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g3evm_map_io, .init_irq = sh7367_init_irq, .init_machine = g3evm_init, - .timer = &shmobile_timer, + .timer = &g3evm_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-g4evm.c b/arch/arm/mach-shmobile/board-g4evm.c index 10673a90be5..2c3ff6f7f34 100644 --- a/arch/arm/mach-shmobile/board-g4evm.c +++ b/arch/arm/mach-shmobile/board-g4evm.c @@ -30,12 +30,39 @@ #include <linux/io.h> #include <linux/input.h> #include <linux/input/sh_keysc.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <linux/gpio.h> #include <mach/sh7377.h> #include <mach/common.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/mach/time.h> + +/* + * SDHI + * + * SDHI0 : card detection is possible + * SDHI1 : card detection is impossible + * + * [G4-MAIN-BOARD] + * JP74 : short # DBG_2V8A for SDHI0 + * JP75 : NC # DBG_3V3A for SDHI0 + * JP76 : NC # DBG_3V3A_SD for SDHI0 + * JP77 : NC # 3V3A_SDIO for SDHI1 + * JP78 : short # DBG_2V8A for SDHI1 + * JP79 : NC # DBG_3V3A for SDHI1 + * JP80 : NC # DBG_3V3A_SD for SDHI1 + * + * [G4-CORE-BOARD] + * S32 : all off # to dissever from G3-CORE_DBG board + * S33 : all off # to dissever from G3-CORE_DBG board + * + * [G3-CORE_DBG-BOARD] + * S1 : all off # to dissever from G3-CORE_DBG board + * S3 : all off # to dissever from G3-CORE_DBG board + * S4 : all off # to dissever from G3-CORE_DBG board + */ static struct mtd_partition nor_flash_partitions[] = { { @@ -90,7 +117,7 @@ static struct platform_device nor_flash_device = { }; /* USBHS */ -void usb_host_port_power(int port, int power) +static void usb_host_port_power(int port, int power) { if (!power) /* only power-on supported for now */ return; @@ -112,8 +139,7 @@ static struct resource usb_host_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 65, - .end = 65, + .start = evt2irq(0x0a20), /* USBHS_USHI0 */ .flags = IORESOURCE_IRQ, }, }; @@ -154,7 +180,7 @@ static struct resource keysc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = 79, + .start = evt2irq(0x0be0), /* KEYSC_KEY */ .flags = IORESOURCE_IRQ, }, }; @@ -169,10 +195,53 @@ static struct platform_device keysc_device = { }, }; +/* SDHI */ +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0xe6d50000, + .end = 0xe6d501ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e00), /* SDHI0 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0xe6d60000, + .end = 0xe6d601ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = evt2irq(0x0e80), /* SDHI1 */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, +}; + static struct platform_device *g4evm_devices[] __initdata = { &nor_flash_device, &usb_host_device, &keysc_device, + &sdhi0_device, + &sdhi1_device, }; static struct map_desc g4evm_io_desc[] __initdata = { @@ -191,12 +260,41 @@ static void __init g4evm_map_io(void) { iotable_init(g4evm_io_desc, ARRAY_SIZE(g4evm_io_desc)); - /* setup early devices, clocks and console here as well */ + /* setup early devices and console here as well */ sh7377_add_early_devices(); - sh7367_clock_init(); /* use g3 clocks for now */ shmobile_setup_console(); } +#define GPIO_SDHID0_D0 0xe60520fc +#define GPIO_SDHID0_D1 0xe60520fd +#define GPIO_SDHID0_D2 0xe60520fe +#define GPIO_SDHID0_D3 0xe60520ff +#define GPIO_SDHICMD0 0xe6052100 + +#define GPIO_SDHID1_D0 0xe6052103 +#define GPIO_SDHID1_D1 0xe6052104 +#define GPIO_SDHID1_D2 0xe6052105 +#define GPIO_SDHID1_D3 0xe6052106 +#define GPIO_SDHICMD1 0xe6052107 + +/* + * FIXME !! + * + * gpio_pull_up is quick_hack. + * + * current gpio frame work doesn't have + * the method to control only pull up/down/free. + * this function should be replaced by correct gpio function + */ +static void __init gpio_pull_up(u32 addr) +{ + u8 data = __raw_readb(addr); + + data &= 0x0F; + data |= 0xC0; + __raw_writeb(data, addr); +} + static void __init g4evm_init(void) { sh7377_pinmux_init(); @@ -229,9 +327,6 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_EXTLP, NULL); gpio_request(GPIO_FN_IDIN, NULL); - /* enable clock in SMSTPCR3 */ - __raw_writel(__raw_readl(0xe615013c) & ~(1 << 22), 0xe615013c); - /* setup USB phy */ __raw_writew(0x0200, 0xe605810a); /* USBCR1 */ __raw_writew(0x00e0, 0xe60581c0); /* CPFCH */ @@ -253,16 +348,54 @@ static void __init g4evm_init(void) gpio_request(GPIO_FN_PORT71_KEYIN5_PU, NULL); gpio_request(GPIO_FN_PORT72_KEYIN6_PU, NULL); + /* SDHI0 */ + gpio_request(GPIO_FN_SDHICLK0, NULL); + gpio_request(GPIO_FN_SDHICD0, NULL); + gpio_request(GPIO_FN_SDHID0_0, NULL); + gpio_request(GPIO_FN_SDHID0_1, NULL); + gpio_request(GPIO_FN_SDHID0_2, NULL); + gpio_request(GPIO_FN_SDHID0_3, NULL); + gpio_request(GPIO_FN_SDHICMD0, NULL); + gpio_request(GPIO_FN_SDHIWP0, NULL); + gpio_pull_up(GPIO_SDHID0_D0); + gpio_pull_up(GPIO_SDHID0_D1); + gpio_pull_up(GPIO_SDHID0_D2); + gpio_pull_up(GPIO_SDHID0_D3); + gpio_pull_up(GPIO_SDHICMD0); + + /* SDHI1 */ + gpio_request(GPIO_FN_SDHICLK1, NULL); + gpio_request(GPIO_FN_SDHID1_0, NULL); + gpio_request(GPIO_FN_SDHID1_1, NULL); + gpio_request(GPIO_FN_SDHID1_2, NULL); + gpio_request(GPIO_FN_SDHID1_3, NULL); + gpio_request(GPIO_FN_SDHICMD1, NULL); + gpio_pull_up(GPIO_SDHID1_D0); + gpio_pull_up(GPIO_SDHID1_D1); + gpio_pull_up(GPIO_SDHID1_D2); + gpio_pull_up(GPIO_SDHID1_D3); + gpio_pull_up(GPIO_SDHICMD1); + sh7377_add_standard_devices(); platform_add_devices(g4evm_devices, ARRAY_SIZE(g4evm_devices)); } +static void __init g4evm_timer_init(void) +{ + sh7377_clock_init(); + shmobile_timer.init(); +} + +static struct sys_timer g4evm_timer = { + .init = g4evm_timer_init, +}; + MACHINE_START(G4EVM, "g4evm") .phys_io = 0xe6000000, .io_pg_offst = ((0xe6000000) >> 18) & 0xfffc, .map_io = g4evm_map_io, .init_irq = sh7377_init_irq, .init_machine = g4evm_init, - .timer = &shmobile_timer, + .timer = &g4evm_timer, MACHINE_END diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index bb940c6e4e6..b6454c9f2ab 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -1,5 +1,5 @@ /* - * Preliminary clock framework support for sh7367 + * SH7367 clock framework support * * Copyright |