diff options
Diffstat (limited to 'arch')
282 files changed, 9612 insertions, 13846 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 303703d716f..d219ebecabf 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -134,6 +134,7 @@ config PPC select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ + select SPARSE_IRQ select IRQ_PER_CPU select IRQ_DOMAIN select GENERIC_IRQ_SHOW @@ -377,13 +378,16 @@ config CRASH_DUMP The same kernel binary can be used as production kernel and dump capture kernel. -config PHYP_DUMP - bool "Hypervisor-assisted dump (EXPERIMENTAL)" - depends on PPC_PSERIES && EXPERIMENTAL +config FA_DUMP + bool "Firmware-assisted dump" + depends on PPC64 && PPC_RTAS && CRASH_DUMP help - Hypervisor-assisted dump is meant to be a kdump replacement - offering robustness and speed not possible without system - hypervisor assistance. + A robust mechanism to get reliable kernel crash dump with + assistance from firmware. This approach does not use kexec, + instead firmware assists in booting the kdump kernel + while preserving memory contents. Firmware-assisted dump + is meant to be a kdump replacement offering robustness and + speed not possible without system firmware assistance. If unsure, say "N" @@ -612,7 +616,7 @@ endmenu config ISA_DMA_API bool - default !PPC_ISERIES || PCI + default PCI menu "Bus options" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index 4ccb2a009f7..72d55dbc611 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -196,13 +196,6 @@ config PPC_EARLY_DEBUG_MAPLE help Select this to enable early debugging for Maple. -config PPC_EARLY_DEBUG_ISERIES - bool "iSeries HV Console" - depends on PPC_ISERIES - help - Select this to enable early debugging for legacy iSeries. You need - to hit "Ctrl-x Ctrl-x" to see the messages on the console. - config PPC_EARLY_DEBUG_PAS_REALMODE bool "PA Semi real mode" depends on PPC_PASEMI diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index b8b105c01c6..6524c6e2189 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -157,6 +157,7 @@ core-y += arch/powerpc/kernel/ \ arch/powerpc/net/ core-$(CONFIG_XMON) += arch/powerpc/xmon/ core-$(CONFIG_KVM) += arch/powerpc/kvm/ +core-$(CONFIG_PERF_EVENTS) += arch/powerpc/perf/ drivers-$(CONFIG_OPROFILE) += arch/powerpc/oprofile/ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 8844a17ce8e..e8461cb18d0 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -184,7 +184,6 @@ image-$(CONFIG_PPC_EFIKA) += zImage.chrp image-$(CONFIG_PPC_PMAC) += zImage.pmac image-$(CONFIG_PPC_HOLLY) += dtbImage.holly image-$(CONFIG_PPC_PRPMC2800) += dtbImage.prpmc2800 -image-$(CONFIG_PPC_ISERIES) += zImage.iseries image-$(CONFIG_DEFAULT_UIMAGE) += uImage image-$(CONFIG_EPAPR_BOOT) += zImage.epapr @@ -247,7 +246,7 @@ image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ - cuImage.mpc8548cds \ + cuImage.mpc8548cds_32b \ cuImage.mpc8555cds image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ @@ -311,12 +310,6 @@ $(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb $(obj)/vmlinux.strip: vmlinux $(STRIP) -s -R .comment $< -o $@ -# The iseries hypervisor won't take an ET_DYN executable, so this -# changes the type (byte 17) in the file to ET_EXEC (2). -$(obj)/zImage.iseries: vmlinux - $(STRIP) -s -R .comment $< -o $@ - printf "\x02" | dd of=$@ conv=notrunc bs=1 seek=17 - $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) @@ -364,7 +357,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) # anything not in $(targets) clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ - zImage.iseries zImage.miboot zImage.pmac zImage.pseries \ + zImage.miboot zImage.pmac zImage.pseries \ zImage.maple simpleImage.* otheros.bld *.dtb # clean up files cached by wrapper diff --git a/arch/powerpc/boot/dts/a4m072.dts b/arch/powerpc/boot/dts/a4m072.dts new file mode 100644 index 00000000000..fabe7b7d5f1 --- /dev/null +++ b/arch/powerpc/boot/dts/a4m072.dts @@ -0,0 +1,168 @@ +/* + * a4m072 board Device Tree Source + * + * Copyright (C) 2011 DENX Software Engineering GmbH + * Heiko Schocher <hs@denx.de> + * + * Copyright (C) 2007 Semihalf + * Marian Balakowicz <m8@semihalf.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "mpc5200b.dtsi" + +/ { + model = "anonymous,a4m072"; + compatible = "anonymous,a4m072"; + + soc5200@f0000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc5200b-immr"; + ranges = <0 0xf0000000 0x0000c000>; + reg = <0xf0000000 0x00000100>; + bus-frequency = <0>; /* From boot loader */ + system-frequency = <0>; /* From boot loader */ + + cdm@200 { + fsl,init-ext-48mhz-en = <0x0>; + fsl,init-fd-enable = <0x01>; + fsl,init-fd-counters = <0x3333>; + }; + + timer@600 { + fsl,has-wdt; + }; + + gpt3: timer@630 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt4: timer@640 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + gpt5: timer@650 { /* General Purpose Timer in GPIO mode */ + compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + spi@f00 { + status = "disabled"; + }; + + psc@2000 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2000 0x100>; + interrupts = <2 1 0>; + }; + + psc@2200 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2200 0x100>; + interrupts = <2 2 0>; + }; + + psc@2400 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2400 0x100>; + interrupts = <2 3 0>; + }; + + psc@2600 { + status = "disabled"; + }; + + psc@2800 { + status = "disabled"; + }; + + psc@2c00 { + compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; + reg = <0x2c00 0x100>; + interrupts = <2 4 0>; + }; + + ethernet@3000 { + phy-handle = <&phy0>; + }; + + mdio@3000 { + phy0: ethernet-phy@1f { + reg = <0x1f>; + interrupts = <1 2 0>; /* IRQ 2 active low */ + }; + }; + + i2c@3d00 { + status = "disabled"; + }; + + i2c@3d40 { + hwmon@2e { + compatible = "nsc,lm87"; + reg = <0x2e>; + }; + rtc@51 { + compatible = "nxp,rtc8564"; + reg = <0x51>; + }; + }; + }; + + localbus { + compatible = "fsl,mpc5200b-lpb","simple-bus"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0xfe000000 0x02000000 + 1 0 0x62000000 0x00400000 + 2 0 0x64000000 0x00200000 + 3 0 0x66000000 0x01000000 + 6 0 0x68000000 0x01000000 + 7 0 0x6a000000 0x00000004>; + + flash@0,0 { + compatible = "cfi-flash"; + reg = <0 0 0x02000000>; + bank-width = <2>; + #size-cells = <1>; + #address-cells = <1>; + }; + sram0@1,0 { + compatible = "mtd-ram"; + reg = <1 0x00000 0x00400000>; + bank-width = <2>; + }; + }; + + pci@f0000d00 { + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + compatible = "fsl,mpc5200-pci"; + reg = <0xf0000d00 0x100>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x16 */ + 0xc000 0 0 1 &mpc5200_pic 1 3 3 + 0xc000 0 0 2 &mpc5200_pic 1 3 3 + 0xc000 0 0 3 &mpc5200_pic 1 3 3 + 0xc000 0 0 4 &mpc5200_pic 1 3 3>; + clock-frequency = <0>; /* From boot loader */ + interrupts = <2 8 0 2 9 0 2 10 0>; + bus-range = <0 0>; + ranges = <0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xa0000000 0 0x01000000>; + }; +}; diff --git a/arch/powerpc/boot/dts/bluestone.dts b/arch/powerpc/boot/dts/bluestone.dts index 74876f73740..7bda373f10e 100644 --- a/arch/powerpc/boot/dts/bluestone.dts +++ b/arch/powerpc/boot/dts/bluestone.dts @@ -33,7 +33,7 @@ aliases { ethernet0 = &EMAC0; serial0 = &UART0; - //serial1 = &UART1; --gcl missing UART1 label + serial1 = &UART1; }; cpus { @@ -52,7 +52,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; - //next-level-cache = <&L2C0>; --gcl missing L2C0 label + next-level-cache = <&L2C0>; }; }; @@ -117,6 +117,16 @@ dcr-reg = <0x00c 0x002>; }; + L2C0: l2c { + compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 + 0x030 0x008>; + cache-line-size = <32>; + cache-size = <262144>; + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + plb { compatible = "ibm,plb4"; #address-cells = <2>; @@ -182,6 +192,53 @@ reg = <0x001a0000 0x00060000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + /* 2Gb Nand Flash */ + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "firmware"; + reg = <0x00000000 0x00C00000>; + }; + partition@c00000 { + label = "environment"; + reg = <0x00C00000 0x00B00000>; + }; + partition@1700000 { + label = "kernel"; + reg = <0x01700000 0x00E00000>; + }; + partition@2500000 { + label = "root"; + reg = <0x02500000 0x08200000>; + }; + partition@a700000 { + label = "device-tree"; + reg = <0x0A700000 0x00B00000>; + }; + partition@b200000 { + label = "config"; + reg = <0x0B200000 0x00D00000>; + }; + partition@bf00000 { + label = "diag"; + reg = <0x0BF00000 0x00C00000>; + }; + partition@cb00000 { + label = "vendor"; + reg = <0x0CB00000 0x3500000>; + }; + }; + }; }; UART0: serial@ef600300 { @@ -195,11 +252,36 @@ interrupts = <0x1 0x4>; }; + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x00000008>; + virtual-reg = <0xef600400>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <&UIC0>; + interrupts = <0x1 0x4>; + }; + IIC0: i2c@ef600700 { compatible = "ibm,iic"; reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; + sttm@4C { + compatible = "adm,adm1032"; + reg = <0x4C>; + interrupt-parent = <&UIC1>; + interrupts = <0x1E 0x8>; /* CPU_THERNAL_L */ + }; }; IIC1: i2c@ef600800 { @@ -250,5 +332,46 @@ }; }; + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-apm821xx", "ibm,plb-pciex"; + primary; + port = <0x0>; /* port number */ + reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */ + 0x0000000c 0x08010000 0x00001000>; /* Registers */ + dcr-reg = <0x100 0x020>; + sdr-base = <0x300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 + 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>; + + /* This drives busses 40 to 0x7f */ + bus-range = <0x40 0x7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = < + 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */ + 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */ + 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */ + 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>; + }; }; }; diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index b37da56018b..c8b2daa40ac 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -202,7 +202,7 @@ /include/ "pq3-etsec1-timer-0.dtsi" usb@22000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; reg = <0x22000 0x1000>; #address-cells = <1>; #size-cells = <0>; @@ -210,7 +210,7 @@ }; usb@23000 { - compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; + compatible = "fsl-usb2-mph-v1.2", "fsl,mpc8536-usb2-mph", "fsl-usb2-mph"; reg = <0x23000 0x1000>; #address-cells = <1>; #size-cells = <0>; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi index 9d8023a69d7..579d76cb8e3 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-post.dtsi @@ -89,6 +89,21 @@ }; }; +&rio { + compatible = "fsl,srio"; + interrupts = <48 2 0 0>; + #address-cells = <2>; + #size-cells = <2>; + fsl,srio-rmu-handle = <&rmu>; + ranges; + + port1 { + #address-cells = <2>; + #size-cells = <2>; + cell-index = <1>; + }; +}; + &soc { #address-cells = <1>; #size-cells = <1>; @@ -134,6 +149,7 @@ /include/ "pq3-sec2.1-0.dtsi" /include/ "pq3-mpic.dtsi" +/include/ "pq3-rmu-0.dtsi" global-utilities@e0000 { compatible = "fsl,mpc8548-guts"; diff --git a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi index 289f1218d75..720422d8352 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8548si-pre.dtsi @@ -43,7 +43,9 @@ serial0 = &serial0; serial1 = &serial1; ethernet0 = &enet0; - ethernet1 = &enet2; + ethernet1 = &enet1; + ethernet2 = &enet2; + ethernet3 = &enet3; pci0 = &pci0; pci1 = &pci1; pci2 = &pci2; diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index a97d1263372..0bde9ee8afa 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -156,6 +156,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { compatible = "fsl,p1010-esdhc", "fsl,esdhc"; diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index 5de5fc35131..68cc5e7f647 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -142,7 +142,13 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi index 38ba54d1e32..4252ef85fb7 100644 --- a/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1021si-post.dtsi @@ -142,8 +142,15 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + sdhci,auto-cmd12; + }; + /include/ "pq3-sec3.3-0.dtsi" /include/ "pq3-mpic.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index ff9ed1d8792..06216b8c0af 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -35,7 +35,11 @@ &lbc { #address-cells = <2>; #size-cells = <1>; - compatible = "fsl,p1022-elbc", "fsl,elbc", "simple-bus"; + /* + * The localbus on the P1022 is not a simple-bus because of the eLBC + * pin muxing when the DIU is enabled. + */ + compatible = "fsl,p1022-elbc", "fsl,elbc"; interrupts = <19 2 0 0>; }; @@ -199,7 +203,13 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-usb2-dr-1.dtsi" + usb@23000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { diff --git a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi index b06bb4cc1fe..941fa159cef 100644 --- a/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1023si-post.dtsi @@ -142,6 +142,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; crypto: crypto@300000 { compatible = "fsl,sec-v4.2", "fsl,sec-v4.0"; diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi index 332e9e75e6c..884e01bcb24 100644 --- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -171,6 +171,9 @@ /include/ "pq3-dma-0.dtsi" /include/ "pq3-usb2-dr-0.dtsi" + usb@22000 { + compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; + }; /include/ "pq3-etsec1-0.dtsi" /include/ "pq3-etsec1-timer-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi index 234a399ddeb..531eab82c6c 100644 --- a/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2041si-post.dtsi @@ -309,12 +309,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi index d41d08de7f7..af4ebc8009e 100644 --- a/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3041si-post.dtsi @@ -336,12 +336,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi index a63edd195ae..b3e56929eee 100644 --- a/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p3060si-post.dtsi @@ -291,6 +291,12 @@ /include/ "qoriq-duart-1.dtsi" /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" + usb@210000 { + compatible = "fsl-usb2-mph-v2.2", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; + }; /include/ "qoriq-usb2-dr-0.dtsi" + usb@211000 { + compatible = "fsl-usb2-dr-v2.2", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; + }; /include/ "qoriq-sec4.1-0.dtsi" }; diff --git a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi index 914074b91a8..64b6abea846 100644 --- a/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p5020si-post.dtsi @@ -339,12 +339,14 @@ /include/ "qoriq-gpio-0.dtsi" /include/ "qoriq-usb2-mph-0.dtsi" usb0: usb@210000 { + compatible = "fsl-usb2-mph-v1.6", "fsl,mpc85xx-usb2-mph", "fsl-usb2-mph"; phy_type = "utmi"; port0; }; /include/ "qoriq-usb2-dr-0.dtsi" usb1: usb@211000 { + compatible = "fsl-usb2-dr-v1.6", "fsl,mpc85xx-usb2-dr", "fsl-usb2-dr"; dr_mode = "host"; phy_type = "utmi"; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi index a1979ae334a..3b0650a9847 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-0.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x24000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@24000 { compatible = "gianfar"; reg = <0x24000 0x1000>; ranges = <0x0 0x24000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi index 4c4fdde1ec2..96693b41f0f 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-1.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x25000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@25000 { compatible = "gianfar"; reg = <0x25000 0x1000>; ranges = <0x0 0x25000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi index 4b8ab438668..6b3fab19da1 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-2.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x26000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@26000 { compatible = "gianfar"; reg = <0x26000 0x1000>; ranges = <0x0 0x26000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi index 40c9137729a..0da592d93dd 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-etsec1-3.dtsi @@ -1,7 +1,7 @@ /* * PQ3 eTSEC device tree stub [ @ offsets 0x27000 ] * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -41,6 +41,7 @@ ethernet@27000 { compatible = "gianfar"; reg = <0x27000 0x1000>; ranges = <0x0 0x27000 0x1000>; + fsl,magic-packet; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 2 0 0 38 2 0 0 39 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi index 5c804606584..fdedf7b1fe0 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-mpic.dtsi @@ -39,6 +39,9 @@ mpic: pic@40000 { reg = <0x40000 0x40000>; compatible = "fsl,mpic"; device_type = "open-pic"; + big-endian; + single-cpu-affinity; + last-interrupt-source = <255>; }; timer@41100 { diff --git a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi index bf957a7fca2..d4c9d5daab2 100644 --- a/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi +++ b/arch/powerpc/boot/dts/fsl/pq3-sec4.4-0.dtsi @@ -33,32 +33,32 @@ */ crypto@30000 { - compatible = "fsl,sec4.4", "fsl,sec4.0"; + compatible = "fsl,sec-v4.4", "fsl,sec-v4.0"; #address-cells = <1>; #size-cells = <1>; reg = <0x30000 0x10000>; interrupts = <58 2 0 0>; sec_jr0: jr@1000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x1000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr1: jr@2000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x2000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr2: jr@3000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x3000 0x1000>; interrupts = <45 2 0 0>; }; sec_jr3: jr@4000 { - compatible = "fsl,sec4.4-job-ring", "fsl,sec4.0-job-ring"; + compatible = "fsl,sec-v4.4-job-ring", "fsl,sec-v4.0-job-ring"; reg = <0x4000 0x1000>; interrupts = <45 2 0 0>; }; diff --git a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi index b9bada6a87d..08f42271f86 100644 --- a/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi +++ b/arch/powerpc/boot/dts/fsl/qoriq-mpic.dtsi @@ -53,7 +53,7 @@ timer@41100 { msi0: msi@41600 { compatible = "fsl,mpic-msi"; - reg = <0x41600 0x200>; + reg = <0x41600 0x200 0x44140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xe0 0 0 0 @@ -68,7 +68,7 @@ msi0: msi@41600 { msi1: msi@41800 { compatible = "fsl,mpic-msi"; - reg = <0x41800 0x200>; + reg = <0x41800 0x200 0x45140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xe8 0 0 0 @@ -83,7 +83,7 @@ msi1: msi@41800 { msi2: msi@41a00 { compatible = "fsl,mpic-msi"; - reg = <0x41a00 0x200>; + reg = <0x41a00 0x200 0x46140 4>; msi-available-ranges = <0 0x100>; interrupts = < 0xf0 0 0 0 diff --git a/arch/powerpc/boot/dts/ge_imp3a.dts b/arch/powerpc/boot/dts/ge_imp3a.dts new file mode 100644 index 00000000000..fefae416a09 --- /dev/null +++ b/arch/powerpc/boot/dts/ge_imp3a.dts @@ -0,0 +1,255 @@ +/* + * GE IMP3A Device Tree Source + * + * Copyright 2010-2011 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: P2020 DS Device Tree Source + * Copyright 2009 Freescale Semiconductor Inc. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "GE_IMP3A"; + compatible = "ge,imp3a"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fef05000 { + reg = <0 0xfef05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xe8000000 0x08000000 + 0x3 0x0 0x0 0xfc100000 0x00020000 + 0x4 0x0 0x0 0xfc000000 0x00008000 + 0x5 0x0 0x0 0xfc008000 0x00008000 + 0x6 0x0 0x0 0xfee00000 0x00040000 + 0x7 0x0 0x0 0xfee80000 0x00040000>; + + /* nor@0,0 is a mirror of part of the memory in nor@1,0 + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + nor@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "ge,imp3a-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; + + nvram@3,0 { + device_type = "nvram"; + compatible = "simtek,stk14ca8"; + reg = <0x3 0x0 0x20000>; + }; + + fpga@4,0 { + compatible = "ge,imp3a-fpga-regs"; + reg = <0x4 0x0 0x20>; + }; + + gef_pic: pic@4,20 { + #interrupt-cells = <1>; + interrupt-controller; + device_type = "interrupt-controller"; + compatible = "ge,imp3a-fpga-pic", "gef,fpga-pic-1.00"; + reg = <0x4 0x20 0x20>; + interrupts = <6 7 0 0>; + }; + + gef_gpio: gpio@4,400 { + #gpio-cells = <2>; + compatible = "ge,imp3a-gpio"; + reg = <0x4 0x400 0x24>; + gpio-controller; + }; + + wdt@4,800 { + compatible = "ge,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x800 0x8>; + interrupts = <10 4>; + interrupt-parent = <&gef_pic>; + }; + + /* Second watchdog available, driver currently supports one. + wdt@4,808 { + compatible = "gef,imp3a-fpga-wdt", "gef,fpga-wdt-1.00", + "gef,fpga-wdt"; + reg = <0x4 0x808 0x8>; + interrupts = <9 4>; + interrupt-parent = <&gef_pic>; + }; + */ + + nand@6,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x6 0x0 0x40000>; + }; + + nand@7,0 { + compatible = "fsl,elbc-fcm-nand"; + reg = <0x7 0x0 0x40000>; + }; + }; + + soc: soc@fef00000 { + ranges = <0x0 0 0xfef00000 0x100000>; + + i2c@3000 { + hwmon@48 { + compatible = "national,lm92"; + reg = <0x48>; + }; + + hwmon@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "epson,rx8581"; + reg = <0x51>; + }; + + eti@6b { + compatible = "dallas,ds1682"; + reg = <0x6b>; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupt-parent = <&gef_pic>; + interrupts = <0xc 0x4>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupt-parent = <&gef_pic>; + interrupts = <0xb 0x4>; + reg = <0x2>; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "gmii"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + phy-connection-type = "gmii"; + }; + + enet2: ethernet@26000 { + status = "disabled"; + }; + }; + + pci0: pcie@fef08000 { + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe020000 0x0 0x10000>; + reg = <0 0xfef08000 0 0x1000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; + + pci1: pcie@fef09000 { + reg = <0 0xfef09000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe010000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + + }; + + pci2: pcie@fef0a000 { + reg = <0 0xfef0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xfe000000 0x0 0x10000>; + + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x10000>; + }; + }; +}; + +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index c0e450a551b..81dd513d630 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -405,6 +405,10 @@ reg = <0x1>; device_type = "ethernet-phy"; }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; }; qeic: interrupt-controller@80 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index c15881574fd..19736222a0b 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -1,7 +1,7 @@ /* * MPC8536 DS Device Tree Source * - * Copyright 2008 Freescale Semiconductor, Inc. + * Copyright 2008, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -34,6 +34,10 @@ lbc: localbus@ffe05000 { reg = <0 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x2 0x0 0x0 0xffa00000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; }; board_soc: soc: soc@ffe00000 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dtsi b/arch/powerpc/boot/dts/mpc8536ds.dtsi index 1462e4cf49d..cc46dbd9746 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8536ds.dtsi @@ -32,6 +32,99 @@ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8536-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "fs-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x08000000>; + label = "ramdisk-nand"; + }; + + partition@1a000000 { + reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@1e000000 { + reg = <0x1e000000 0x01000000>; + label = "dtb-nand"; + }; + + partition@1f000000 { + reg = <0x1f000000 0x21000000>; + label = "empty-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,mpc8536ds-fpga-pixis"; + reg = <0x3 0x0 0x8000>; + }; +}; + &board_soc { i2c@3100 { rtc@68 { diff --git a/arch/powerpc/boot/dts/mpc8536ds_36b.dts b/arch/powerpc/boot/dts/mpc8536ds_36b.dts index 8f4b929b1d1..f8a3b341317 100644 --- a/arch/powerpc/boot/dts/mpc8536ds_36b.dts +++ b/arch/powerpc/boot/dts/mpc8536ds_36b.dts @@ -1,7 +1,7 @@ /* * MPC8536DS Device Tree Source (36-bit address map) * - * Copyright 2008-2009 Freescale Semiconductor, Inc. + * Copyright 2008-2009, 2011 Freescale Semiconductor, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -33,7 +33,11 @@ }; lbc: localbus@ffe05000 { - reg = <0 0xffe05000 0 0x1000>; + reg = <0xf 0xffe05000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x2 0x0 0xf 0xffa00000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; }; board_soc: soc: soc@fffe00000 { diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts deleted file mode 100644 index 07b8dae0f46..00000000000 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ /dev/null @@ -1,306 +0,0 @@ -/* - * MPC8548 CDS Device Tree Source - * - * Copyright 2006, 2008 Freescale Semiconductor Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -/include/ "fsl/mpc8548si-pre.dtsi" - -/ { - model = "MPC8548CDS"; - compatible = "MPC8548CDS", "MPC85xxCDS"; - - aliases { - ethernet0 = &enet0; - ethernet1 = &enet1; - ethernet2 = &enet2; - ethernet3 = &enet3; - serial0 = &serial0; - serial1 = &serial1; - pci0 = &pci0; - pci1 = &pci1; - pci2 = &pci2; - }; - - memory { - device_type = "memory"; - reg = <0 0 0x0 0x8000000>; // 128M at 0x0 - }; - - lbc: localbus@e0005000 { - reg = <0 0xe0005000 0 0x1000>; - }; - - soc: soc8548@e0000000 { - ranges = <0 0x0 0xe0000000 0x100000>; - - i2c@3000 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - reg = <0x56>; - }; - - eeprom@57 { - compatible = "atmel,24c64"; - reg = <0x57>; - }; - }; - - i2c@3100 { - eeprom@50 { - compatible = "atmel,24c64"; - reg = <0x50>; - }; - }; - - enet0: ethernet@24000 { - tbi-handle = <&tbi0>; - phy-handle = <&phy0>; - }; - - mdio@24520 { - phy0: ethernet-phy@0 { - interrupts = <5 1 0 0>; - reg = <0x0>; - device_type = "ethernet-phy"; - }; - phy1: ethernet-phy@1 { - interrupts = <5 1 0 0>; - reg = <0x1>; - device_type = "ethernet-phy"; - }; - phy2: ethernet-phy@2 { - interrupts = <5 1 0 0>; - reg = <0x2>; - device_type = "ethernet-phy"; - }; - phy3: ethernet-phy@3 { - interrupts = <5 1 0 0>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; - tbi0: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet1: ethernet@25000 { - tbi-handle = <&tbi1>; - phy-handle = <&phy1>; - }; - - mdio@25520 { - tbi1: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet2: ethernet@26000 { - tbi-handle = <&tbi2>; - phy-handle = <&phy2>; - }; - - mdio@26520 { - tbi2: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - - enet3: ethernet@27000 { - tbi-handle = <&tbi3>; - phy-handle = <&phy3>; - }; - - mdio@27520 { - tbi3: tbi-phy@11 { - reg = <0x11>; - device_type = "tbi-phy"; - }; - }; - }; - - pci0: pci@e0008000 { - reg = <0 0xe0008000 0 0x1000>; - ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - /* IDSEL 0x4 (PCIX Slot 2) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x5 (PCIX Slot 3) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x6 (PCIX Slot 4) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x8 (PCIX Slot 5) */ - 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0xC (Tsi310 bridge) */ - 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x14 (Slot 2) */ - 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x15 (Slot 3) */ - 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 - - /* IDSEL 0x16 (Slot 4) */ - 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x18 (Slot 5) */ - 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ - 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - - pci_bridge@1c { - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x00 (PrPMC Site) */ - 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x04 (VIA chip) */ - 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 - 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 - - /* IDSEL 0x05 (8139) */ - 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 - - /* IDSEL 0x06 (Slot 6) */ - 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 - 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 - 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 - 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 - - /* IDESL 0x07 (Slot 7) */ - 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 - 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 - 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 - 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; - - reg = <0xe000 0x0 0x0 0x0 0x0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - ranges = <0x2000000 0x0 0x80000000 - 0x2000000 0x0 0x80000000 - 0x0 0x20000000 - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x80000>; - clock-frequency = <33333333>; - - isa@4 { - device_type = "isa"; - #interrupt-cells = <2>; - #size-cells = <1>; - #address-cells = <2>; - reg = <0x2000 0x0 0x0 0x0 0x0>; - ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; - interrupt-parent = <&i8259>; - - i8259: interrupt-controller@20 { - interrupt-controller; - device_type = "interrupt-controller"; - reg = <0x1 0x20 0x2 - 0x1 0xa0 0x2 - 0x1 0x4d0 0x2>; - #address-cells = <0>; - #interrupt-cells = <2>; - compatible = "chrp,iic"; - interrupts = <0 1 0 0>; - interrupt-parent = <&mpic>; - }; - - rtc@70 { - compatible = "pnpPNP,b00"; - reg = <0x1 0x70 0x2>; - }; - }; - }; - }; - - pci1: pci@e0009000 { - reg = <0 0xe0009000 0 0x1000>; - ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 - 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; - clock-frequency = <66666666>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; - interrupt-map = < - - /* IDSEL 0x15 */ - 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 - 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 - 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 - 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; - }; - - pci2: pcie@e000a000 { - reg = <0 0xe000a000 0 0x1000>; - ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; - pcie@0 { - ranges = <0x2000000 0x0 0xa0000000 - 0x2000000 0x0 0xa0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/mpc8548si-post.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds.dtsi b/arch/powerpc/boot/dts/mpc8548cds.dtsi new file mode 100644 index 00000000000..c61f525e474 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds.dtsi @@ -0,0 +1,306 @@ +/* + * MPC8548CDS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x01000000>; + bank-width = <2>; + device-width = <2>; + + partition@0 { + reg = <0x0 0x0b00000>; + label = "ramdisk-nor"; + }; + + partition@300000 { + reg = <0x0b00000 0x0400000>; + label = "kernel-nor"; + }; + + partition@700000 { + reg = <0x0f00000 0x060000>; + label = "dtb-nor"; + }; + + partition@760000 { + reg = <0x0f60000 0x020000>; + label = "env-nor"; + read-only; + }; + + partition@780000 { + reg = <0x0f80000 0x080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + board-control@1,0 { + compatible = "fsl,mpc8548cds-fpga"; + reg = <0x1 0x0 0x1000>; + }; +}; + +&board_soc { + i2c@3000 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + + eeprom@56 { + compatible = "atmel,24c64"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + }; + }; + + i2c@3100 { + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + }; + }; + + enet0: ethernet@24000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <5 1 0 0>; + reg = <0x0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupts = <5 1 0 0>; + reg = <0x1>; + device_type = "ethernet-phy"; + }; + phy2: ethernet-phy@2 { + interrupts = <5 1 0 0>; + reg = <0x2>; + device_type = "ethernet-phy"; + }; + phy3: ethernet-phy@3 { + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi1>; + phy-handle = <&phy1>; + }; + + mdio@25520 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet2: ethernet@26000 { + tbi-handle = <&tbi2>; + phy-handle = <&phy2>; + }; + + mdio@26520 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet3: ethernet@27000 { + tbi-handle = <&tbi3>; + phy-handle = <&phy3>; + }; + + mdio@27520 { + tbi3: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; +}; + +&board_pci0 { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + /* IDSEL 0x4 (PCIX Slot 2) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x5 (PCIX Slot 3) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0x2800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0x2800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0x2800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x6 (PCIX Slot 4) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x8 (PCIX Slot 5) */ + 0x4000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x4000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x4000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x4000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0xC (Tsi310 bridge) */ + 0x6000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x6000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x6000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x6000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x14 (Slot 2) */ + 0xa000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xa000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x15 (Slot 3) */ + 0xa800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x3 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x0 0x1 0 0 + + /* IDSEL 0x16 (Slot 4) */ + 0xb000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0xb000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0xb000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0xb000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x18 (Slot 5) */ + 0xc000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xc000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xc000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xc000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x1C (Tsi310 bridge PCI primary) */ + 0xe000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0xe000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xe000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xe000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + + pci_bridge@1c { + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x00 (PrPMC Site) */ + 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x04 (VIA chip) */ + 0x2000 0x0 0x0 0x1 &mpic 0x0 0x1 0 0 + 0x2000 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0x2000 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0x2000 0x0 0x0 0x4 &mpic 0x3 0x1 0 0 + + /* IDSEL 0x05 (8139) */ + 0x2800 0x0 0x0 0x1 &mpic 0x1 0x1 0 0 + + /* IDSEL 0x06 (Slot 6) */ + 0x3000 0x0 0x0 0x1 &mpic 0x2 0x1 0 0 + 0x3000 0x0 0x0 0x2 &mpic 0x3 0x1 0 0 + 0x3000 0x0 0x0 0x3 &mpic 0x0 0x1 0 0 + 0x3000 0x0 0x0 0x4 &mpic 0x1 0x1 0 0 + + /* IDESL 0x07 (Slot 7) */ + 0x3800 0x0 0x0 0x1 &mpic 0x3 0x1 0 0 + 0x3800 0x0 0x0 0x2 &mpic 0x0 0x1 0 0 + 0x3800 0x0 0x0 0x3 &mpic 0x1 0x1 0 0 + 0x3800 0x0 0x0 0x4 &mpic 0x2 0x1 0 0>; + + reg = <0xe000 0x0 0x0 0x0 0x0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x80000>; + clock-frequency = <33333333>; + + isa@4 { + device_type = "isa"; + #interrupt-cells = <2>; + #size-cells = <1>; + #address-cells = <2>; + reg = <0x2000 0x0 0x0 0x0 0x0>; + ranges = <0x1 0x0 0x1000000 0x0 0x0 0x1000>; + interrupt-parent = <&i8259>; + + i8259: interrupt-controller@20 { + interrupt-controller; + device_type = "interrupt-controller"; + reg = <0x1 0x20 0x2 + 0x1 0xa0 0x2 + 0x1 0x4d0 0x2>; + #address-cells = <0>; + #interrupt-cells = <2>; + compatible = "chrp,iic"; + interrupts = <0 1 0 0>; + interrupt-parent = <&mpic>; + }; + + rtc@70 { + compatible = "pnpPNP,b00"; + reg = <0x1 0x70 0x2>; + }; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8548cds_32b.dts b/arch/powerpc/boot/dts/mpc8548cds_32b.dts new file mode 100644 index 00000000000..6fd63163fc6 --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_32b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (32-bit address map) + * + * Copyright 2006, 2008, 2011-2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@e0005000 { + reg = <0 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0x0 0xff000000 0x01000000 + 0x1 0x0 0x0 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@e0000000 { + ranges = <0 0x0 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@e0008000 { + reg = <0 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@e0009000 { + reg = <0 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@e000a000 { + reg = <0 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@e00c0000 { + reg = <0x0 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8548cds_36b.dts b/arch/powerpc/boot/dts/mpc8548cds_36b.dts new file mode 100644 index 00000000000..10e551b11bd --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8548cds_36b.dts @@ -0,0 +1,86 @@ +/* + * MPC8548 CDS Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "fsl/mpc8548si-pre.dtsi" + +/ { + model = "MPC8548CDS"; + compatible = "MPC8548CDS", "MPC85xxCDS"; + + memory { + device_type = "memory"; + reg = <0 0 0x0 0x8000000>; // 128M at 0x0 + }; + + board_lbc: lbc: localbus@fe0005000 { + reg = <0xf 0xe0005000 0 0x1000>; + + ranges = <0x0 0x0 0xf 0xff000000 0x01000000 + 0x1 0x0 0xf 0xf8004000 0x00001000>; + + }; + + board_soc: soc: soc8548@fe0000000 { + ranges = <0 0xf 0xe0000000 0x100000>; + }; + + board_pci0: pci0: pci@fe0008000 { + reg = <0xf 0xe0008000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2000000 0x0 0x800000>; + clock-frequency = <66666666>; + }; + + pci1: pci@fe0009000 { + reg = <0xf 0xe0009000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000 + 0x1000000 0x0 0x00000000 0xf 0xe2800000 0x0 0x800000>; + clock-frequency = <66666666>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + + /* IDSEL 0x15 */ + 0xa800 0x0 0x0 0x1 &mpic 0xb 0x1 0 0 + 0xa800 0x0 0x0 0x2 &mpic 0x1 0x1 0 0 + 0xa800 0x0 0x0 0x3 &mpic 0x2 0x1 0 0 + 0xa800 0x0 0x0 0x4 &mpic 0x3 0x1 0 0>; + }; + + pci2: pcie@fe000a000 { + reg = <0xf 0xe000a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xe3000000 0x0 0x100000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + rio: rapidio@fe00c0000 { + reg = <0xf 0xe00c0000 0x0 0x20000>; + port1 { + ranges = <0x0 0x0 0xc 0x40000000 0x0 0x20000000>; + }; + }; +}; + +/* + * mpc8548cds.dtsi must be last to ensure board_pci0 overrides pci0 settings + * for interrupt-map & interrupt-map-mask. + */ + +/include/ "fsl/mpc8548si-post.dtsi" +/include/ "mpc8548cds.dtsi" diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi index c3d4fac0532..14178944e22 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dtsi +++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi @@ -41,37 +41,47 @@ bank-width = <2>; device-width = <1>; - ramdisk@0 { + partition@0 { reg = <0x0 0x03000000>; - read-only; + label = "ramdisk-nor"; }; - diagnostic@3000000 { + partition@3000000 { reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; read-only; }; - dink@3e00000 { + partition@3e00000 { reg = <0x03e00000 0x00200000>; + label = "dink-nor"; read-only; }; - kernel@4000000 { + partition@4000000 { reg = <0x04000000 0x00400000>; - read-only; + label = "kernel-nor"; }; - jffs2@4400000 { + partition@4400000 { reg = <0x04400000 0x03b00000>; + label = "fs-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00060000>; + label = "dtb-nor"; }; - dtb@7f00000 { - reg = <0x07f00000 0x00080000>; + partition@7f60000 { + reg = <0x07f60000 0x00020000>; + label = "env-nor"; read-only; }; - u-boot@7f80000 { + partition@7f80000 { reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; read-only; }; }; @@ -83,31 +93,35 @@ "fsl,elbc-fcm-nand"; reg = <0x2 0x0 0x40000>; - u-boot@0 { + partition@0 { reg = <0x0 0x02000000>; + label = "u-boot-nand"; read-only; }; - jffs2@2000000 { + partition@2000000 { reg = <0x02000000 0x10000000>; + label = "fs-nand"; }; - ramdisk@12000000 { + partition@12000000 { reg = <0x12000000 0x08000000>; - read-only; + label = "ramdisk-nand"; }; - kernel@1a000000 { + partition@1a000000 { reg = <0x1a000000 0x04000000>; + label = "kernel-nand"; }; - dtb@1e000000 { + partition@1e000000 { reg = <0x1e000000 0x01000000>; - read-only; + label = "dtb-nand"; }; - empty@1f000000 { + partition@1f000000 { reg = <0x1f000000 0x21000000>; + label = "empty-nand"; }; }; diff --git a/arch/powerpc/boot/dts/p1010rdb.dtsi b/arch/powerpc/boot/dts/p1010rdb.dtsi index d4c4a773028..49776143a1b 100644 --- a/arch/powerpc/boot/dts/p1010rdb.dtsi +++ b/arch/powerpc/boot/dts/p1010rdb.dtsi @@ -138,7 +138,7 @@ #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; partition@0 { /* 1MB for u-boot Bootloader Image */ @@ -196,7 +196,7 @@ }; tbi-phy@3 { - device-type = "tbi-phy"; + device_type = "tbi-phy"; reg = <0x3>; }; }; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc.dtsi b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi new file mode 100644 index 00000000000..c952cd37cf6 --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc.dtsi @@ -0,0 +1,247 @@ +/* + * P1020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image*/ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + device_type = "tbi-phy"; + reg = <0x11>; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts new file mode 100644 index 00000000000..4de69b726dc --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_32b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (32-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts new file mode 100644 index 00000000000..5237da7441b --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_36b.dts @@ -0,0 +1,90 @@ +/* + * P1020 RDB-PC Device Tree Source (36-bit address map) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1020si-pre.dtsi" +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00040000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1020rdb-pc.dtsi" +/include/ "fsl/p1020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts new file mode 100644 index 00000000000..f411515937e --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core0.dts @@ -0,0 +1,64 @@ +/* + * P1020 RDB-PC Core0 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts file allows core0 to have memory, l2, i2c, spi, gpio, tdm, dma, usb, + * eth1, eth2, sdhc, crypto, global-util, message, pci0, pci1, msi. + * + * Please note to add "-b 0" for core0's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet1 = &enet1; + ethernet2 = &enet2; + serial0 = &serial0; + pci0 = &pci0; + pci1 = &pci1; + }; + + cpus { + PowerPC,P1020@1 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + serial1: serial@4600 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 42 29 30 34 /* serial1, enet0-queue-group0 */ + 17 18 24 45 /* enet0-queue-group1, crypto */ + >; + pic-no-reset; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts new file mode 100644 index 00000000000..a91335ad82c --- /dev/null +++ b/arch/powerpc/boot/dts/p1020rdb-pc_camp_core1.dts @@ -0,0 +1,142 @@ +/* + * P1020 RDB-PC Core1 Device Tree Source in CAMP mode. + * + * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache + * can be shared, all the other devices must be assigned to one core only. + * This dts allows core1 to have l2, eth0, crypto. + * + * Please note to add "-b 1" for core1's dts compiling. + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/include/ "p1020rdb-pc_32b.dts" + +/ { + model = "fsl,P1020RDB-PC"; + compatible = "fsl,P1020RDB-PC"; + + aliases { + ethernet0 = &enet0; + serial0 = &serial1; + }; + + cpus { + PowerPC,P1020@0 { + status = "disabled"; + }; + }; + + memory { + device_type = "memory"; + }; + + localbus@ffe05000 { + status = "disabled"; + }; + + soc@ffe00000 { + ecm-law@0 { + status = "disabled"; + }; + + ecm@1000 { + status = "disabled"; + }; + + memory-controller@2000 { + status = "disabled"; + }; + + i2c@3000 { + status = "disabled"; + }; + + i2c@3100 { + status = "disabled"; + }; + + serial0: serial@4500 { + status = "disabled"; + }; + + spi@7000 { + status = "disabled"; + }; + + gpio: gpio-controller@f000 { + status = "disabled"; + }; + + dma@21300 { + status = "disabled"; + }; + + mdio@24000 { + status = "disabled"; + }; + + mdio@25000 { + status = "disabled"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "disabled"; + }; + + usb@22000 { + status = "disabled"; + }; + + sdhci@2e000 { + status = "disabled"; + }; + + mpic: pic@40000 { + protected-sources = < + 16 /* ecm, mem, L2, pci0, pci1 */ + 43 42 59 /* i2c, serial0, spi */ + 47 63 62 /* gpio, tdm */ + 20 21 22 23 /* dma */ + 03 02 /* mdio */ + 35 36 40 /* enet1-queue-group0 */ + 51 52 67 /* enet1-queue-group1 */ + 31 32 33 /* enet2-queue-group0 */ + 25 26 27 /* enet2-queue-group1 */ + 28 72 58 /* usb, sdhci, crypto */ + 0xb0 0xb1 0xb2 /* message */ + 0xb3 0xb4 0xb5 + 0xb6 0xb7 + 0xe0 0xe1 0xe2 /* msi */ + 0xe3 0xe4 0xe5 + 0xe6 0xe7 /* sdhci, crypto , pci */ + >; + pic-no-reset; + }; + + msi@41600 { + status = "disabled"; + }; + + global-utilities@e0000 { //global utilities block + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb.dts b/arch/powerpc/boot/dts/p1021rdb.dts new file mode 100644 index 00000000000..90b6b4caa27 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1021rdb.dtsi b/arch/powerpc/boot/dts/p1021rdb.dtsi new file mode 100644 index 00000000000..b973461ab75 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb.dtsi @@ -0,0 +1,236 @@ +/* + * P1021 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1021-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for User Writable Area */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI Flash U-Boot Image"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI Flash DTB Image"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Flash Linux Kernel Image"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Flash Compressed RFSImage"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI Flash JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + tbi-handle = <&tbi2>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1021rdb_36b.dts b/arch/powerpc/boot/dts/p1021rdb_36b.dts new file mode 100644 index 00000000000..ea6d8b5fa10 --- /dev/null +++ b/arch/powerpc/boot/dts/p1021rdb_36b.dts @@ -0,0 +1,96 @@ +/* + * P1021 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1021RDB"; + compatible = "fsl,P1021RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes and Vitesse 5 port L2 switch */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xc0000000 + 0x2000000 0x0 0xc0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@fffe80000 { + ranges = <0x0 0xf 0xffe80000 0x40000>; + reg = <0xf 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + }; +}; + +/include/ "p1021rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dts b/arch/powerpc/boot/dts/p1022ds.dts deleted file mode 100644 index ef95717db4b..00000000000 --- a/arch/powerpc/boot/dts/p1022ds.dts +++ /dev/null @@ -1,274 +0,0 @@ -/* - * P1022 DS 36Bit Physical Address Map Device Tree Source - * - * Copyright 2010 Freescale Semiconductor, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/include/ "fsl/p1022si-pre.dtsi" -/ { - model = "fsl,P1022DS"; - compatible = "fsl,P1022DS"; - - memory { - device_type = "memory"; - }; - - lbc: localbus@fffe05000 { - reg = <0xf 0xffe05000 0 0x1000>; - ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 - 0x1 0x0 0xf 0xe0000000 0x08000000 - 0x2 0x0 0xf 0xff800000 0x00040000 - 0x3 0x0 0xf 0xffdf0000 0x00008000>; - - /* - * This node is used to access the pixis via "indirect" mode, - * which is done by writing the pixis register index to chip - * select 0 and the value to/from chip select 1. Indirect - * mode is the only way to access the pixis when DIU video - * is enabled. Note that this assumes that the first column - * of the 'ranges' property above is the chip select number. - */ - board-control@0,0 { - compatible = "fsl,p1022ds-indirect-pixis"; - reg = <0x0 0x0 1 /* CS0 */ - 0x1 0x0 1>; /* CS1 */ - }; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - - partition@0 { - reg = <0x0 0x03000000>; - label = "ramdisk-nor"; - read-only; - }; - - partition@3000000 { - reg = <0x03000000 0x00e00000>; - label = "diagnostic-nor"; - read-only; - }; - - partition@3e00000 { - reg = <0x03e00000 0x00200000>; - label = "dink-nor"; - read-only; - }; - - partition@4000000 { - reg = <0x04000000 0x00400000>; - label = "kernel-nor"; - read-only; - }; - - partition@4400000 { - reg = <0x04400000 0x03b00000>; - label = "jffs2-nor"; - }; - - partition@7f00000 { - reg = <0x07f00000 0x00080000>; - label = "dtb-nor"; - read-only; - }; - - partition@7f80000 { - reg = <0x07f80000 0x00080000>; - label = "u-boot-nor"; - read-only; - }; - }; - - nand@2,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "fsl,elbc-fcm-nand"; - reg = <0x2 0x0 0x40000>; - - partition@0 { - reg = <0x0 0x02000000>; - label = "u-boot-nand"; - read-only; - }; - - partition@2000000 { - reg = <0x02000000 0x10000000>; - label = "jffs2-nand"; - }; - - partition@12000000 { - reg = <0x12000000 0x10000000>; - label = "ramdisk-nand"; - read-only; - }; - - partition@22000000 { - reg = <0x22000000 0x04000000>; - label = "kernel-nand"; - }; - - partition@26000000 { - reg = <0x26000000 0x01000000>; - label = "dtb-nand"; - read-only; - }; - - partition@27000000 { - reg = <0x27000000 0x19000000>; - label = "reserved-nand"; - }; - }; - - board-control@3,0 { - compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; - reg = <3 0 0x30>; - interrupt-parent = <&mpic>; - /* - * IRQ8 is generated if the "EVENT" switch is pressed - * and PX_CTL[EVESEL] is set to 00. - */ - interrupts = <8 8 0 0>; - }; - }; - - soc: soc@fffe00000 { - ranges = <0x0 0xf 0xffe00000 0x100000>; - - i2c@3100 { - wm8776:codec@1a { - compatible = "wlf,wm8776"; - reg = <0x1a>; - /* - * clock-frequency will be set by U-Boot if - * the clock is enabled. - */ - }; - }; - - spi@7000 { - flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "spansion,s25sl12801"; - reg = <0>; - spi-max-frequency = <40000000>; /* input clock */ - - partition@0 { - label = "u-boot-spi"; - reg = <0x00000000 0x00100000>; - read-only; - }; - partition@100000 { - label = "kernel-spi"; - reg = <0x00100000 0x00500000>; - read-only; - }; - partition@600000 { - label = "dtb-spi"; - reg = <0x00600000 0x00100000>; - read-only; - }; - partition@700000 { - label = "file system-spi"; - reg = <0x00700000 0x00900000>; - }; - }; - }; - - ssi@15000 { - fsl,mode = "i2s-slave"; - codec-handle = <&wm8776>; - fsl,ssi-asynchronous; - }; - - usb@22000 { - phy_type = "ulpi"; - }; - - usb@23000 { - status = "disabled"; - }; - - mdio@24000 { - phy0: ethernet-phy@0 { - interrupts = <3 1 0 0>; - reg = <0x1>; - }; - phy1: ethernet-phy@1 { - interrupts = <9 1 0 0>; - reg = <0x2>; - }; - tbi-phy@2 { - device_type = "tbi-phy"; - reg = <0x2>; - }; - }; - - ethernet@b0000 { - phy-handle = <&phy0>; - phy-connection-type = "rgmii-id"; - }; - - ethernet@b1000 { - phy-handle = <&phy1>; - phy-connection-type = "rgmii-id"; - }; - }; - - pci0: pcie@fffe09000 { - reg = <0xf 0xffe09000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci1: pcie@fffe0a000 { - reg = <0xf 0xffe0a000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; - pcie@0 { - reg = <0x0 0x0 0x0 0x0 0x0>; - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; - - pci2: pcie@fffe0b000 { - reg = <0xf 0xffe0b000 0 0x1000>; - ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 - 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; - pcie@0 { - ranges = <0x2000000 0x0 0xe0000000 - 0x2000000 0x0 0xe0000000 - 0x0 0x20000000 - - 0x1000000 0x0 0x0 - 0x1000000 0x0 0x0 - 0x0 0x100000>; - }; - }; -}; - -/include/ "fsl/p1022si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds.dtsi b/arch/powerpc/boot/dts/p1022ds.dtsi new file mode 100644 index 00000000000..7cdb505036b --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds.dtsi @@ -0,0 +1,234 @@ +/* + * P1022 DS Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&board_lbc { + /* + * This node is used to access the pixis via "indirect" mode, + * which is done by writing the pixis register index to chip + * select 0 and the value to/from chip select 1. Indirect + * mode is the only way to access the pixis when DIU video + * is enabled. Note that this assumes that the first column + * of the 'ranges' property above is the chip select number. + */ + board-control@0,0 { + compatible = "fsl,p1022ds-indirect-pixis"; + reg = <0x0 0x0 1 /* CS0 */ + 0x1 0x0 1>; /* CS1 */ + interrupt-parent = <&mpic>; + interrupts = <8 0 0 0>; + }; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + reg = <0x0 0x03000000>; + label = "ramdisk-nor"; + read-only; + }; + + partition@3000000 { + reg = <0x03000000 0x00e00000>; + label = "diagnostic-nor"; + read-only; + }; + + partition@3e00000 { + reg = <0x03e00000 0x00200000>; + label = "dink-nor"; + read-only; + }; + + partition@4000000 { + reg = <0x04000000 0x00400000>; + label = "kernel-nor"; + read-only; + }; + + partition@4400000 { + reg = <0x04400000 0x03b00000>; + label = "jffs2-nor"; + }; + + partition@7f00000 { + reg = <0x07f00000 0x00080000>; + label = "dtb-nor"; + read-only; + }; + + partition@7f80000 { + reg = <0x07f80000 0x00080000>; + label = "u-boot-nor"; + read-only; + }; + }; + + nand@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,elbc-fcm-nand"; + reg = <0x2 0x0 0x40000>; + + partition@0 { + reg = <0x0 0x02000000>; + label = "u-boot-nand"; + read-only; + }; + + partition@2000000 { + reg = <0x02000000 0x10000000>; + label = "jffs2-nand"; + }; + + partition@12000000 { + reg = <0x12000000 0x10000000>; + label = "ramdisk-nand"; + read-only; + }; + + partition@22000000 { + reg = <0x22000000 0x04000000>; + label = "kernel-nand"; + }; + + partition@26000000 { + reg = <0x26000000 0x01000000>; + label = "dtb-nand"; + read-only; + }; + + partition@27000000 { + reg = <0x27000000 0x19000000>; + label = "reserved-nand"; + }; + }; + + board-control@3,0 { + compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + interrupt-parent = <&mpic>; + /* + * IRQ8 is generated if the "EVENT" switch is pressed + * and PX_CTL[EVESEL] is set to 00. + */ + interrupts = <8 0 0 0>; + }; +}; + +&board_soc { + i2c@3100 { + wm8776:codec@1a { + compatible = "wlf,wm8776"; + reg = <0x1a>; + /* + * clock-frequency will be set by U-Boot if + * the clock is enabled. + */ + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@0 { + label = "u-boot-spi"; + reg = <0x00000000 0x00100000>; + read-only; + }; + partition@100000 { + label = "kernel-spi"; + reg = <0x00100000 0x00500000>; + read-only; + }; + partition@600000 { + label = "dtb-spi"; + reg = <0x00600000 0x00100000>; + read-only; + }; + partition@700000 { + label = "file system-spi"; + reg = <0x00700000 0x00900000>; + }; + }; + }; + + ssi@15000 { + fsl,mode = "i2s-slave"; + codec-handle = <&wm8776>; + fsl,ssi-asynchronous; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + usb@23000 { + status = "disabled"; + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x1>; + }; + phy1: ethernet-phy@1 { + interrupts = <9 1 0 0>; + reg = <0x2>; + }; + tbi-phy@2 { + device_type = "tbi-phy"; + reg = <0x2>; + }; + }; + + ethernet@b0000 { + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + ethernet@b1000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p1022ds_32b.dts b/arch/powerpc/boot/dts/p1022ds_32b.dts new file mode 100644 index 00000000000..d96cae00a9e --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_32b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 32-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@ffe05000 { + ranges = <0x0 0x0 0x0 0xe8000000 0x08000000 + 0x1 0x0 0x0 0xe0000000 0x08000000 + 0x2 0x0 0x0 0xff800000 0x00040000 + 0x3 0x0 0x0 0xffdf0000 0x00008000>; + reg = <0x0 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0x0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; + reg = <0 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + reg = <0 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1022ds_36b.dts b/arch/powerpc/boot/dts/p1022ds_36b.dts new file mode 100644 index 00000000000..f7aacce40bf --- /dev/null +++ b/arch/powerpc/boot/dts/p1022ds_36b.dts @@ -0,0 +1,103 @@ +/* + * P1022 DS 36-bit Physical Address Map Device Tree Source + * + * Copyright 2012 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1022si-pre.dtsi" +/ { + model = "fsl,P1022DS"; + compatible = "fsl,P1022DS"; + + memory { + device_type = "memory"; + }; + + board_lbc: lbc: localbus@fffe05000 { + ranges = <0x0 0x0 0xf 0xe8000000 0x08000000 + 0x1 0x0 0xf 0xe0000000 0x08000000 + 0x2 0x0 0xf 0xff800000 0x00040000 + 0x3 0x0 0xf 0xffdf0000 0x00008000>; + reg = <0xf 0xffe05000 0 0x1000>; + }; + + board_soc: soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + reg = <0xf 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x10000>; + reg = <0xf 0xffe0a000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0b000 { + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + reg = <0xf 0xffe0b000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1022si-post.dtsi" +/include/ "p1022ds.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb.dtsi b/arch/powerpc/boot/dts/p1025rdb.dtsi new file mode 100644 index 00000000000..cf3676fc714 --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb.dtsi @@ -0,0 +1,286 @@ +/* + * P1025 RDB Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p1025-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25sl12801"; + reg = <0>; + spi-max-frequency = <40000000>; /* input clock */ + + partition@u-boot { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "u-boot"; + read-only; + }; + + partition@dtb { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "dtb"; + }; + + partition@kernel { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "kernel"; + }; + + partition@fs { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "file system"; + }; + + partition@jffs-fs { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "file system jffs2"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + /* USB2 is shared with localbus, so it must be disabled + by default. We can't put 'status = "disabled";' here + since U-Boot doesn't clear the status property when + it enables USB2. OTOH, U-Boot does create a new node + when there isn't any. So, just comment it out. + usb@23000 { + phy_type = "ulpi"; + }; + */ + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <3 1>; + reg = <0x0>; + }; + + phy1: ethernet-phy@1 { + interrupt-parent = <&mpic>; + interrupts = <2 1>; + reg = <0x1>; + }; + + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@25000 { + tbi1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + + }; + + enet1: ethernet@b1000 { + phy-handle = <&phy0>; + tbi-handle = <&tbi1>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + par_io@e0100 { + #address-cells = <1>; + #size-cells = <1>; + reg = <0xe0100 0x60>; + ranges = <0x0 0xe0100 0x60>; + device_type = "par_io"; + num-ports = <3>; + pio1: ucc_pin@01 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ + 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ + 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ + 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ + 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ + 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ + 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ + 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ + 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ + 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ + 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ + 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ + 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ + 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ + 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ + 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ + }; + + pio2: ucc_pin@02 { + pio-map = < + /* port pin dir open_drain assignment has_irq */ + 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ + 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ + 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ + 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ + 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ + 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ + 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ + 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ + 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ + 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ + }; + }; +}; diff --git a/arch/powerpc/boot/dts/p1025rdb_32b.dts b/arch/powerpc/boot/dts/p1025rdb_32b.dts new file mode 100644 index 00000000000..ac5729c14ed --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_32b.dts @@ -0,0 +1,135 @@ +/* + * P1025 RDB Device Tree Source (32-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + qe: qe@ffe80000 { + ranges = <0x0 0x0 0xffe80000 0x40000>; + reg = <0 0xffe80000 0 0x480>; + brg-frequency = <0>; + bus-frequency = <0>; + status = "disabled"; /* no firmware loaded */ + + enet3: ucc@2000 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "clk12"; + tx-clock-name = "clk9"; + pio-handle = <&pio1>; + phy-handle = <&qe_phy0>; + phy-connection-type = "mii"; + }; + + mdio@2120 { + qe_phy0: ethernet-phy@0 { + interrupt-parent = <&mpic>; + interrupts = <4 1 0 0>; + reg = <0x6>; + device_type = "ethernet-phy"; + }; + qe_phy1: ethernet-phy@03 { + interrupt-parent = <&mpic>; + interrupts = <5 1 0 0>; + reg = <0x3>; + device_type = "ethernet-phy"; + }; + tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet4: ucc@2400 { + device_type = "network"; + compatible = "ucc_geth"; + rx-clock-name = "none"; + tx-clock-name = "clk13"; + pio-handle = <&pio2>; + phy-handle = <&qe_phy1>; + phy-connection-type = "rmii"; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p1025rdb_36b.dts b/arch/powerpc/boot/dts/p1025rdb_36b.dts new file mode 100644 index 00000000000..4ce4bfa0eda --- /dev/null +++ b/arch/powerpc/boot/dts/p1025rdb_36b.dts @@ -0,0 +1,88 @@ +/* + * P1025 RDB Device Tree Source (36-bit address map) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p1021si-pre.dtsi" +/ { + model = "fsl,P1025RDB"; + compatible = "fsl,P1025RDB"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR, NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xe 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p1025rdb.dtsi" +/include/ "fsl/p1021si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc.dtsi b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi new file mode 100644 index 00000000000..c21d1c7d16c --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc.dtsi @@ -0,0 +1,241 @@ +/* + * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges) + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +&lbc { + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <2>; + device-width = <1>; + + partition@0 { + /* This location must not be altered */ + /* 256KB for Vitesse 7385 Switch firmware */ + reg = <0x0 0x00040000>; + label = "NOR Vitesse-7385 Firmware"; + read-only; + }; + + partition@40000 { + /* 256KB for DTB Image */ + reg = <0x00040000 0x00040000>; + label = "NOR DTB Image"; + }; + + partition@80000 { + /* 3.5 MB for Linux Kernel Image */ + reg = <0x00080000 0x00380000>; + label = "NOR Linux Kernel Image"; + }; + + partition@400000 { + /* 11MB for JFFS2 based Root file System */ + reg = <0x00400000 0x00b00000>; + label = "NOR JFFS2 Root File System"; + }; + + partition@f00000 { + /* This location must not be altered */ + /* 512KB for u-boot Bootloader Image */ + /* 512KB for u-boot Environment Variables */ + reg = <0x00f00000 0x00100000>; + label = "NOR U-Boot Image"; + read-only; + }; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p2020-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <0x1 0x0 0x40000>; + + partition@0 { + /* This location must not be altered */ + /* 1MB for u-boot Bootloader Image */ + reg = <0x0 0x00100000>; + label = "NAND U-Boot Image"; + read-only; + }; + + partition@100000 { + /* 1MB for DTB Image */ + reg = <0x00100000 0x00100000>; + label = "NAND DTB Image"; + }; + + partition@200000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00200000 0x00400000>; + label = "NAND Linux Kernel Image"; + }; + + partition@600000 { + /* 4MB for Compressed Root file System Image */ + reg = <0x00600000 0x00400000>; + label = "NAND Compressed RFS Image"; + }; + + partition@a00000 { + /* 7MB for JFFS2 based Root file System */ + reg = <0x00a00000 0x00700000>; + label = "NAND JFFS2 Root File System"; + }; + + partition@1100000 { + /* 15MB for JFFS2 based Root file System */ + reg = <0x01100000 0x00f00000>; + label = "NAND Writable User area"; + }; + }; + + L2switch@2,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "vitesse-7385"; + reg = <0x2 0x0 0x20000>; + }; + + cpld@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cpld"; + reg = <0x3 0x0 0x20000>; + read-only; + }; +}; + +&soc { + i2c@3000 { + rtc@68 { + compatible = "pericom,pt7c4338"; + reg = <0x68>; + }; + }; + + spi@7000 { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,m25p80"; + reg = <0>; + spi-max-frequency = <40000000>; + + partition@0 { + /* 512KB for u-boot Bootloader Image */ + reg = <0x0 0x00080000>; + label = "SPI U-Boot Image"; + read-only; + }; + + partition@80000 { + /* 512KB for DTB Image */ + reg = <0x00080000 0x00080000>; + label = "SPI DTB Image"; + }; + + partition@100000 { + /* 4MB for Linux Kernel Image */ + reg = <0x00100000 0x00400000>; + label = "SPI Linux Kernel Image"; + }; + + partition@500000 { + /* 4MB for Compressed RFS Image */ + reg = <0x00500000 0x00400000>; + label = "SPI Compressed RFS Image"; + }; + + partition@900000 { + /* 7MB for JFFS2 based RFS */ + reg = <0x00900000 0x00700000>; + label = "SPI JFFS2 RFS"; + }; + }; + }; + + usb@22000 { + phy_type = "ulpi"; + }; + + mdio@24520 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x0>; + }; + phy1: ethernet-phy@1 { + interrupts = <2 1 0 0>; + reg = <0x1>; + }; + }; + + mdio@25520 { + tbi0: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26520 { + status = "disabled"; + }; + + ptp_clock@24e00 { + fsl,tclk-period = <5>; + fsl,tmr-prsc = <200>; + fsl,tmr-add = <0xCCCCCCCD>; + fsl,tmr-fiper1 = <0x3B9AC9FB>; + fsl,tmr-fiper2 = <0x0001869B>; + fsl,max-adj = <249999999>; + }; + + enet0: ethernet@24000 { + fixed-link = <1 1 1000 0 0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@25000 { + tbi-handle = <&tbi0>; + phy-handle = <&phy0>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@26000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; +}; diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts new file mode 100644 index 00000000000..852e5b27485 --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_32b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 32Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0x0 0xef000000 0x01000000 + 0x1 0x0 0x0 0xff800000 0x00040000 + 0x2 0x0 0x0 0xffb00000 0x00020000 + 0x3 0x0 0x0 0xffa00000 0x00020000>; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + }; + + pci0: pcie@ffe08000 { + reg = <0 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@ffe09000 { + reg = <0 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts new file mode 100644 index 00000000000..b5a56ca51cf --- /dev/null +++ b/arch/powerpc/boot/dts/p2020rdb-pc_36b.dts @@ -0,0 +1,96 @@ +/* + * P2020 RDB-PC 36Bit Physical Address Map Device Tree Source + * + * Copyright 2011 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/include/ "fsl/p2020si-pre.dtsi" + +/ { + model = "fsl,P2020RDB"; + compatible = "fsl,P2020RDB-PC"; + + memory { + device_type = "memory"; + }; + + lbc: localbus@fffe05000 { + reg = <0xf 0xffe05000 0 0x1000>; + + /* NOR and NAND Flashes */ + ranges = <0x0 0x0 0xf 0xef000000 0x01000000 + 0x1 0x0 0xf 0xff800000 0x00040000 + 0x2 0x0 0xf 0xffb00000 0x00020000 + 0x3 0x0 0xf 0xffa00000 0x00020000>; + }; + + soc: soc@fffe00000 { + ranges = <0x0 0xf 0xffe00000 0x100000>; + }; + + pci0: pcie@fffe08000 { + reg = <0xf 0xffe08000 0 0x1000>; + status = "disabled"; + }; + + pci1: pcie@fffe09000 { + reg = <0xf 0xffe09000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci2: pcie@fffe0a000 { + reg = <0xf 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0xe0000000 + 0x2000000 0x0 0xe0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "p2020rdb-pc.dtsi" +/include/ "fsl/p2020si-post.dtsi" diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index eb8a6aa2bda..153bc76bb48 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -34,7 +34,7 @@ /* NOR and NAND Flashes */ ranges = <0x0 0x0 0x0 0xef000000 0x01000000 - 0x1 0x0 0x0 0xffa00000 0x00040000 + 0x1 0x0 0x0 0xff800000 0x00040000 0x2 0x0 0x0 0xffb00000 0x00020000>; nor@0,0 { @@ -157,7 +157,7 @@ #size-cells = <1>; compatible = "spansion,s25sl12801"; reg = <0>; - spi-max-frequency = <50000000>; + spi-max-frequency = <40000000>; partition@0 { /* 512KB for u-boot Bootloader Image */ diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index f090e6d2907..6761c746048 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -144,6 +144,7 @@ tmp=$tmpdir/zImage.$$.o ksection=.kernel:vmlinux.strip isection=.kernel:initrd link_address='0x400000' +make_space=y case "$platform" in pseries) @@ -210,6 +211,7 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd link_address='' + make_space=n pie= ;; ep88xc|ep405|ep8248e) @@ -278,17 +280,19 @@ else rm -f $vmz.$$ fi -# Round the size to next higher MB limit -round_size=$(((strip_size + 0xfffff) & 0xfff00000)) +if [ "$make_space" = "y" ]; then + # Round the size to next higher MB limit + round_size=$(((strip_size + 0xfffff) & 0xfff00000)) -round_size=0x$(printf "%x" $round_size) -link_addr=$(printf "%d" $link_address) + round_size=0x$(printf "%x" $round_size) + link_addr=$(printf "%d" $link_address) -if [ $link_addr -lt $strip_size ]; then - echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \ - "overlaps the address of the wrapper($link_address)" - echo "INFO: Fixing the link_address of wrapper to ($round_size)" - link_address=$round_size + if [ $link_addr -lt $strip_size ]; then + echo "INFO: Uncompressed kernel (size 0x$(printf "%x\n" $strip_size))" \ + "overlaps the address of the wrapper($link_address)" + echo "INFO: Fixing the link_address of wrapper to ($round_size)" + link_address=$round_size + fi fi vmz="$vmz$gzip" diff --git a/arch/powerpc/configs/85xx/ge_imp3a_defconfig b/arch/powerpc/configs/85xx/ge_imp3a_defconfig new file mode 100644 index 00000000000..f8c51a4ab99 --- /dev/null +++ b/arch/powerpc/configs/85xx/ge_imp3a_defconfig @@ -0,0 +1,257 @@ +CONFIG_PPC_85xx=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_SPARSE_IRQ=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_PERF_EVENTS=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_GE_IMP3A=y +CONFIG_QUICC_ENGINE=y +CONFIG_QE_GPIO=y +CONFIG_CPM2=y +CONFIG_HIGHMEM=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_HZ_1000=y +CONFIG_PREEMPT=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_BINFMT_MISC=m +CONFIG_MATH_EMULATION=y +CONFIG_IRQ_ALL_CPUS=y +CONFIG_FORCE_MAX_ZONEORDER=17 +CONFIG_PCI=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCI_MSI=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_LOAD_CIS is not set +CONFIG_YENTA=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_MULTIPATH=y +CONFIG_IP_ROUTE_VERBOSE=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=m +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y +CONFIG_SYN_COOKIES=y +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET6_AH=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NET_PKTGEN=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSL_ELBC=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=131072 +CONFIG_MISC_DEVICES=y +CONFIG_DS1682=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_ST=y +CONFIG_BLK_DEV_SR=y +CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_SIL24=y +# CONFIG_ATA_SFF is not set +CONFIG_NETDEVICES=y +CONFIG_BONDING=m +CONFIG_DUMMY=m +CONFIG_NETCONSOLE=y +CONFIG_NETPOLL_TRAP=y +CONFIG_TUN=m +# CONFIG_NET_VENDOR_3COM is not set +CONFIG_FS_ENET=y +CONFIG_UCC_GETH=y +CONFIG_GIANFAR=y +CONFIG_PPP=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_FILTER=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPPOE=m +CONFIG_PPP_ASYNC=m +CONFIG_PPP_SYNC_TTY=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_EXTENDED=y +CONFIG_SERIAL_8250_MANY_PORTS=y +CONFIG_SERIAL_8250_DETECT_IRQ=y +CONFIG_SERIAL_8250_RSA=y +CONFIG_SERIAL_QE=m +CONFIG_NVRAM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_CPM=m +CONFIG_I2C_MPC=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y +CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM92=y +CONFIG_WATCHDOG=y +CONFIG_GEF_WDT=y +CONFIG_VIDEO_OUTPUT_CONTROL=m +CONFIG_HID_DRAGONRISE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_ORTEK=y +CONFIG_HID_PANTHERLORD=y +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +CONFIG_HID_SMARTJOYPLUS=y +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +CONFIG_HID_ZEROPLUS=y +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_STORAGE=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_INTF_PROC is not set +CONFIG_RTC_DRV_RX8581=y +CONFIG_DMADEVICES=y +CONFIG_FSL_DMA=y +# CONFIG_NET_DMA is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT4_FS=y +CONFIG_FUSE_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=850 +CONFIG_FAT_DEFAULT_IOCHARSET="ascii" +CONFIG_NTFS_FS=y +CONFIG_PROC_KCORE=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_NFSD_V4=y +CONFIG_CIFS=m +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_CRC_CCITT=y +CONFIG_CRC_T10DIF=y +CONFIG_LIBCRC32C=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_DEV_TALITOS=y diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index d41857a5152..da731c2fe98 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -131,6 +131,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig index 38303ec11bc..2149360a1e6 100644 --- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig @@ -132,6 +132,7 @@ CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 98533973d20..af2e8e1edba 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -183,6 +183,8 @@ CONFIG_NVRAM=y CONFIG_I2C=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_MPC=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_GE_FPGA=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y CONFIG_WATCHDOG=y diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig deleted file mode 100644 index 27c46d67996..00000000000 --- a/arch/powerpc/configs/iseries_defconfig +++ /dev/null @@ -1,236 +0,0 @@ -CONFIG_PPC64=y -CONFIG_SMP=y -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_AUDIT=y -CONFIG_AUDITSYSCALL=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_PPC_PSERIES is not set -CONFIG_LPARCFG=y -CONFIG_PPC_ISERIES=y -CONFIG_VIODASD=y -CONFIG_VIOCD=m -CONFIG_VIOTAPE=m -# CONFIG_PPC_PMAC is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_IRQ_ALL_CPUS=y -# CONFIG_MIGRATION is not set -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_XFRM_SUB_POLICY=y -CONFIG_NET_KEY=m -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_NET_IPIP=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_BEET=m -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_NETFILTER=y -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CONNTRACK_EVENTS=y -# CONFIG_NF_CT_PROTO_SCTP is not set -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_LOG=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_PROC_DEVICETREE=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=y -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_SAS_LIBSAS=m -CONFIG_SCSI_IBMVSCSI=m -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=m -CONFIG_MD_MULTIPATH=m -CONFIG_MD_FAULTY=m -CONFIG_BLK_DEV_DM=y -CONFIG_DM_CRYPT=m -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_MIRROR=m -CONFIG_DM_ZERO=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_NET_PCI=y -CONFIG_PCNET32=y -CONFIG_E100=y -CONFIG_ACENIC=m -CONFIG_E1000=m -CONFIG_ISERIES_VETH=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_NETCONSOLE=y -CONFIG_NETPOLL_TRAP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ICOM=m -# CONFIG_HW_RANDOM is not set -CONFIG_GEN_RTC=y -CONFIG_RAW_DRIVER=y -# CONFIG_HWMON is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT2_FS_XIP=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=y -CONFIG_REISERFS_FS=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -CONFIG_XFS_FS=m -CONFIG_XFS_POSIX_ACL=y -CONFIG_GFS2_FS=m -CONFIG_AUTOFS_FS=m -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_PROC_KCORE=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_CIFS=m -CONFIG_CIFS_XATTR=y -CONFIG_CIFS_POSIX=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DLM=m -CONFIG_CRC_T10DIF=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_LATENCYTOP=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_STACKOVERFLOW=y -CONFIG_DEBUG_STACK_USAGE=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SEED=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 2a1320fb272..6640a35bebb 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -1,8 +1,8 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_SPARSE_IRQ=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set @@ -13,15 +13,12 @@ CONFIG_PPC_EFIKA=y CONFIG_PPC_LITE5200=y CONFIG_PPC_MEDIA5200=y CONFIG_PPC_MPC5200_BUGFIX=y -CONFIG_PPC_MPC5200_GPIO=y CONFIG_PPC_MPC5200_LPBFIFO=m # CONFIG_PPC_PMAC is not set CONFIG_PPC_BESTCOMM=y CONFIG_SIMPLE_GPIO=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y -CONFIG_SPARSE_IRQ=y -CONFIG_PM=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -36,23 +33,20 @@ CONFIG_SYN_COOKIES=y # CONFIG_IPV6 is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_MTD_UBI=m CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_SCSI_TGT=y CONFIG_BLK_DEV_SD=y @@ -61,11 +55,10 @@ CONFIG_ATA=y CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y -CONFIG_LXT_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +CONFIG_AMD_PHY=y +CONFIG_LXT_PHY=y +CONFIG_FIXED_PHY=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_SERIO is not set @@ -80,11 +73,17 @@ CONFIG_SPI_GPIO=m CONFIG_SPI_MPC52xx=m CONFIG_SPI_MPC52xx_PSC=m CONFIG_SPI_SPIDEV=m +CONFIG_GPIO_SYSFS=y +CONFIG_SENSORS_LM80=y +CONFIG_SENSORS_LM87=m CONFIG_WATCHDOG=y +CONFIG_MFD_SM501=m CONFIG_DRM=y CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y +CONFIG_FB_FOREIGN_ENDIAN=y CONFIG_FB_RADEON=y +CONFIG_FB_SM501=m # CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_LOGO=y @@ -124,10 +123,11 @@ CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_DS1374=y +CONFIG_RTC_DRV_PCF8563=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_PROC_KCORE=y @@ -145,5 +145,4 @@ CONFIG_PRINTK_TIME=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index f37a2ab4888..5fb0c8a9481 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,4 +1,5 @@ CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig index abdcd317cda..fb51bc90edd 100644 --- a/arch/powerpc/configs/mpc85xx_smp_defconfig +++ b/arch/powerpc/configs/mpc85xx_smp_defconfig @@ -1,4 +1,5 @@ CONFIG_PPC_85xx=y +CONFIG_PHYS_64BIT=y CONFIG_SMP=y CONFIG_NR_CPUS=8 CONFIG_EXPERIMENTAL=y diff --git a/arch/powerpc/include/asm/abs_addr.h b/arch/powerpc/include/asm/abs_addr.h index 5ab0b71531b..9d92ba04b03 100644 --- a/arch/powerpc/include/asm/abs_addr.h +++ b/arch/powerpc/include/asm/abs_addr.h @@ -17,7 +17,6 @@ #include <asm/types.h> #include <asm/page.h> #include <asm/prom.h> -#include <asm/firmware.h> struct mschunks_map { unsigned long num_chunks; @@ -46,30 +45,12 @@ static inline unsigned long addr_to_chunk(unsigned long addr) static inline unsigned long phys_to_abs(unsigned long pa) { - unsigned long chunk; - - /* This is a no-op on non-iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return pa; - - chunk = addr_to_chunk(pa); - - if (chunk < mschunks_map.num_chunks) - chunk = mschunks_map.mapping[chunk]; - - return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK); + return pa; } /* Convenience macros */ #define virt_to_abs(va) phys_to_abs(__pa(va)) #define abs_to_virt(aa) __va(aa) -/* - * Converts Virtual Address to Real Address for - * Legacy iSeries Hypervisor calls - */ -#define iseries_hv_addr(virtaddr) \ - (0x8000000000000000UL | virt_to_abs(virtaddr)) - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_ABS_ADDR_H */ diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index 02e41b53488..14174e838ad 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -212,6 +212,36 @@ static __inline__ int __atomic_add_unless(atomic_t *v, int a, int u) return t; } +/** + * atomic_inc_not_zero - increment unless the number is zero + * @v: pointer of type atomic_t + * + * Atomically increments @v by 1, so long as @v is non-zero. + * Returns non-zero if @v was non-zero, and zero otherwise. + */ +static __inline__ int atomic_inc_not_zero(atomic_t *v) +{ + int t1, t2; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: lwarx %0,0,%2 # atomic_inc_not_zero\n\ + cmpwi 0,%0,0\n\ + beq- 2f\n\ + addic %1,%0,1\n" + PPC405_ERR77(0,%2) +" stwcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (t1), "=&r" (t2) + : "r" (&v->counter) + : "cc", "xer", "memory"); + + return t1; +} +#define atomic_inc_not_zero(v) atomic_inc_not_zero((v)) #define atomic_sub_and_test(a, v) (atomic_sub_return((a), (v)) == 0) #define atomic_dec_and_test(v) (atomic_dec_return((v)) == 0) @@ -467,7 +497,34 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) return t != u; } -#define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1, 0) +/** + * atomic_inc64_not_zero - increment unless the number is zero + * @v: pointer of type atomic64_t + * + * Atomically increments @v by 1, so long as @v is non-zero. + * Returns non-zero if @v was non-zero, and zero otherwise. + */ +static __inline__ long atomic64_inc_not_zero(atomic64_t *v) +{ + long t1, t2; + + __asm__ __volatile__ ( + PPC_ATOMIC_ENTRY_BARRIER +"1: ldarx %0,0,%2 # atomic64_inc_not_zero\n\ + cmpdi 0,%0,0\n\ + beq- 2f\n\ + addic %1,%0,1\n\ + stdcx. %1,0,%2\n\ + bne- 1b\n" + PPC_ATOMIC_EXIT_BARRIER + "\n\ +2:" + : "=&r" (t1), "=&r" (t2) + : "r" (&v->counter) + : "cc", "xer", "memory"); + + return t1; +} #endif /* __powerpc64__ */ diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index ad55a1ccb9f..b9219e99bd2 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -390,6 +390,10 @@ extern const char *powerpc_base_platform; CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_DEBUG_LVL_EXC) +#define CPU_FTRS_E6500 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE | \ + CPU_FTR_DBELL | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ + CPU_FTR_DEBUG_LVL_EXC) #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ @@ -442,7 +446,7 @@ extern const char *powerpc_base_platform; #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E -#define CPU_FTRS_POSSIBLE (CPU_FTRS_E5500 | CPU_FTRS_A2) +#define CPU_FTRS_POSSIBLE (CPU_FTRS_E6500 | CPU_FTRS_E5500 | CPU_FTRS_A2) #else #define CPU_FTRS_POSSIBLE \ (CPU_FTRS_POWER3 | CPU_FTRS_RS64 | CPU_FTRS_POWER4 | \ @@ -483,7 +487,7 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 | CPU_FTRS_E500_2 | CPU_FTRS_E500MC | - CPU_FTRS_E5500 | + CPU_FTRS_E5500 | CPU_FTRS_E6500 | #endif 0, }; @@ -491,7 +495,7 @@ enum { #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E -#define CPU_FTRS_ALWAYS (CPU_FTRS_E5500 & CPU_FTRS_A2) +#define CPU_FTRS_ALWAYS (CPU_FTRS_E6500 & CPU_FTRS_E5500 & CPU_FTRS_A2) #else #define CPU_FTRS_ALWAYS \ (CPU_FTRS_POWER3 & CPU_FTRS_RS64 & CPU_FTRS_POWER4 & \ @@ -528,7 +532,7 @@ enum { #endif #ifdef CONFIG_E500 CPU_FTRS_E500 & CPU_FTRS_E500_2 & CPU_FTRS_E500MC & - CPU_FTRS_E5500 & + CPU_FTRS_E5500 & CPU_FTRS_E6500 & #endif CPU_FTRS_POSSIBLE, }; diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h index d57c08acedf..63d5ca49cec 100644 --- a/arch/powerpc/include/asm/device.h +++ b/arch/powerpc/include/asm/device.h @@ -31,6 +31,9 @@ struct dev_archdata { #ifdef CONFIG_SWIOTLB dma_addr_t max_direct_dma_addr; #endif +#ifdef CONFIG_EEH + struct eeh_dev *edev; +#endif }; struct pdev_archdata { diff --git a/arch/powerpc/include/asm/dma.h b/arch/powerpc/include/asm/dma.h index a7e06e25c70..adadb994361 100644 --- a/arch/powerpc/include/asm/dma.h +++ b/arch/powerpc/include/asm/dma.h @@ -34,8 +34,6 @@ /* Doesn't really apply... */ #define MAX_DMA_ADDRESS (~0UL) -#if !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) - #ifdef HAVE_REALLY_SLOW_DMA_CONTROLLER #define dma_outb outb_p #else @@ -354,7 +352,5 @@ extern int isa_dma_bridge_buggy; #define isa_dma_bridge_buggy (0) #endif -#endif /* !defined(CONFIG_PPC_ISERIES) || defined(CONFIG_PCI) */ - #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DMA_H */ diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index 66ea9b8b95c..d60f99814ff 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -1,6 +1,6 @@ /* - * eeh.h * Copyright (C) 2001 Dave Engebretsen & Todd Inglett IBM Corporation. + * Copyright 2001-2012 IBM Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -31,44 +31,105 @@ struct device_node; #ifdef CONFIG_EEH -extern int eeh_subsystem_enabled; +/* + * The struct is used to trace EEH state for the associated + * PCI device node or PCI device. In future, it might + * represent PE as well so that the EEH device to form + * another tree except the currently existing tree of PCI + * buses and PCI devices + */ +#define EEH_MODE_SUPPORTED (1<<0) /* EEH supported on the device */ +#define EEH_MODE_NOCHECK (1<<1) /* EEH check should be skipped */ +#define EEH_MODE_ISOLATED (1<<2) /* The device has been isolated */ +#define EEH_MODE_RECOVERING (1<<3) /* Recovering the device */ +#define EEH_MODE_IRQ_DISABLED (1<<4) /* Interrupt disabled */ + +struct eeh_dev { + int mode; /* EEH mode */ + int class_code; /* Class code of the device */ + int config_addr; /* Config address */ + int pe_config_addr; /* PE config address */ + int check_count; /* Times of ignored error */ + int freeze_count; /* Times of froze up */ + int false_positives; /* Times of reported #ff's */ + u32 config_space[16]; /* Saved PCI config space */ + struct pci_controller *phb; /* Associated PHB */ + struct device_node *dn; /* Associated device node */ + struct pci_dev *pdev; /* Associated PCI device */ +}; + +static inline struct device_node *eeh_dev_to_of_node(struct eeh_dev *edev) +{ + return edev->dn; +} + +static inline struct pci_dev *eeh_dev_to_pci_dev(struct eeh_dev *edev) +{ + return edev->pdev; +} -/* Values for eeh_mode bits in device_node */ -#define EEH_MODE_SUPPORTED (1<<0) -#define EEH_MODE_NOCHECK (1<<1) -#define EEH_MODE_ISOLATED (1<<2) -#define EEH_MODE_RECOVERING (1<<3) -#define EEH_MODE_IRQ_DISABLED (1<<4) +/* + * The struct is used to trace the registered EEH operation + * callback functions. Actually, those operation callback + * functions are heavily platform dependent. That means the + * platform should register its own EEH operation callback + * functions before any EEH further operations. + */ +#define EEH_OPT_DISABLE 0 /* EEH disable */ +#define EEH_OPT_ENABLE 1 /* EEH enable */ +#define EEH_OPT_THAW_MMIO 2 /* MMIO enable */ +#define EEH_OPT_THAW_DMA 3 /* DMA enable */ +#define EEH_STATE_UNAVAILABLE (1 << 0) /* State unavailable */ +#define EEH_STATE_NOT_SUPPORT (1 << 1) /* EEH not supported */ +#define EEH_STATE_RESET_ACTIVE (1 << 2) /* Active reset */ +#define EEH_STATE_MMIO_ACTIVE (1 << 3) /* Active MMIO */ +#define EEH_STATE_DMA_ACTIVE (1 << 4) /* Active DMA */ +#define EEH_STATE_MMIO_ENABLED (1 << 5) /* MMIO enabled */ +#define EEH_STATE_DMA_ENABLED (1 << 6) /* DMA enabled */ +#define EEH_RESET_DEACTIVATE 0 /* Deactivate the PE reset */ +#define EEH_RESET_HOT 1 /* Hot reset */ +#define EEH_RESET_FUNDAMENTAL 3 /* Fundamental reset */ +#define EEH_LOG_TEMP 1 /* EEH temporary error log */ +#define EEH_LOG_PERM 2 /* EEH permanent error log */ + +struct eeh_ops { + char *name; + int (*init)(void); + int (*set_option)(struct device_node *dn, int option); + int (*get_pe_addr)(struct device_node *dn); + int (*get_state)(struct device_node *dn, int *state); + int (*reset)(struct device_node *dn, int option); + int (*wait_state)(struct device_node *dn, int max_wait); + int (*get_log)(struct device_node *dn, int severity, char *drv_log, unsigned long len); + int (*configure_bridge)(struct device_node *dn); + int (*read_config)(struct device_node *dn, int where, int size, u32 *val); + int (*write_config)(struct device_node *dn, int where, int size, u32 val); +}; + +extern struct eeh_ops *eeh_ops; +extern int eeh_subsystem_enabled; -/* Max number of EEH freezes allowed before we consider the device - * to be permanently disabled. */ +/* + * Max number of EEH freezes allowed before we consider the device + * to be permanently disabled. + */ #define EEH_MAX_ALLOWED_FREEZES 5 +void * __devinit eeh_dev_init(struct device_node *dn, void *data); +void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb); +void __init eeh_dev_phb_init(void); void __init eeh_init(void); +#ifdef CONFIG_PPC_PSERIES +int __init eeh_pseries_init(void); +#endif +int __init eeh_ops_register(struct eeh_ops *ops); +int __exit eeh_ops_unregister(const char *name); unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val); int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev); void __init pci_addr_cache_build(void); - -/** - * eeh_add_device_early - * eeh_add_device_late - * - * Perform eeh initialization for devices added after boot. - * Call eeh_add_device_early before doing any i/o to the - * device (including config space i/o). Call eeh_add_device_late - * to finish the eeh setup for this device. - */ void eeh_add_device_tree_early(struct device_node *); void eeh_add_device_tree_late(struct pci_bus *); - -/** - * eeh_remove_device_recursive - undo EEH for device & children. - * @dev: pci device to be removed - * - * As above, this removes the device; it also removes child - * pci devices as well. - */ void eeh_remove_bus_device(struct pci_dev *); /** @@ -87,8 +148,25 @@ void eeh_remove_bus_device(struct pci_dev *); #define EEH_IO_ERROR_VALUE(size) (~0U >> ((4 - (size)) * 8)) #else /* !CONFIG_EEH */ + +static inline void *eeh_dev_init(struct device_node *dn, void *data) +{ + return NULL; +} + +static inline void eeh_dev_phb_init_dynamic(struct pci_controller *phb) { } + +static inline void eeh_dev_phb_init(void) { } + static inline void eeh_init(void) { } +#ifdef CONFIG_PPC_PSERIES +static inline int eeh_pseries_init(void) +{ + return 0; +} +#endif /* CONFIG_PPC_PSERIES */ + static inline unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned long val) { return val; diff --git a/arch/powerpc/include/asm/eeh_event.h b/arch/powerpc/include/asm/eeh_event.h index cc3cb04539a..c68b012b779 100644 --- a/arch/powerpc/include/asm/eeh_event.h +++ b/arch/powerpc/include/asm/eeh_event.h @@ -1,6 +1,4 @@ /* - * eeh_event.h - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -22,32 +20,19 @@ #define ASM_POWERPC_EEH_EVENT_H #ifdef __KERNEL__ -/** EEH event -- structure holding pci controller data that describes - * a change in the isolation status of a PCI slot. A pointer - * to this struct is passed as the data pointer in a notify callback. +/* + * structure holding pci controller data that describes a + * change in the isolation status of a PCI slot. A pointer + * to this struct is passed as the data pointer in a notify + * callback. */ struct eeh_event { - struct list_head list; - struct device_node *dn; /* struct device node */ - struct pci_dev *dev; /* affected device */ + struct list_head list; /* to form event queue */ + struct eeh_dev *edev; /* EEH device */ }; -/** - * eeh_send_failure_event - generate a PCI error event - * @dev pci device - * - * This routine builds a PCI error event which will be delivered - * to all listeners on the eeh_notifier_chain. - * - * This routine can be called within an interrupt context; - * the actual event will be delivered in a normal context - * (from a workqueue). - */ -int eeh_send_failure_event (struct device_node *dn, - struct pci_dev *dev); - -/* Main recovery function */ -struct pci_dn * handle_eeh_events (struct eeh_event *); +int eeh_send_failure_event(struct eeh_dev *edev); +struct eeh_dev *handle_eeh_events(struct eeh_event *); #endif /* __KERNEL__ */ #endif /* ASM_POWERPC_EEH_EVENT_H */ diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h index 8057f4f6980..548da3aa0a3 100644 --- a/arch/powerpc/include/asm/exception-64s.h +++ b/arch/powerpc/include/asm/exception-64s.h @@ -232,23 +232,30 @@ label##_hv: \ EXCEPTION_PROLOG_PSERIES(PACA_EXGEN, label##_common, \ EXC_HV, KVMTEST, vec) -#define __SOFTEN_TEST(h) \ +/* This associate vector numbers with bits in paca->irq_happened */ +#define SOFTEN_VALUE_0x500 PACA_IRQ_EE +#define SOFTEN_VALUE_0x502 PACA_IRQ_EE +#define SOFTEN_VALUE_0x900 PACA_IRQ_DEC +#define SOFTEN_VALUE_0x982 PACA_IRQ_DEC + +#define __SOFTEN_TEST(h, vec) \ lbz r10,PACASOFTIRQEN(r13); \ cmpwi r10,0; \ + li r10,SOFTEN_VALUE_##vec; \ beq masked_##h##interrupt -#define _SOFTEN_TEST(h) __SOFTEN_TEST(h) +#define _SOFTEN_TEST(h, vec) __SOFTEN_TEST(h, vec) #define SOFTEN_TEST_PR(vec) \ KVMTEST_PR(vec); \ - _SOFTEN_TEST(EXC_STD) + _SOFTEN_TEST(EXC_STD, vec) #define SOFTEN_TEST_HV(vec) \ KVMTEST(vec); \ - _SOFTEN_TEST(EXC_HV) + _SOFTEN_TEST(EXC_HV, vec) #define SOFTEN_TEST_HV_201(vec) \ KVMTEST(vec); \ - _SOFTEN_TEST(EXC_STD) + _SOFTEN_TEST(EXC_STD, vec) #define __MASKABLE_EXCEPTION_PSERIES(vec, label, h, extra) \ HMT_MEDIUM; \ @@ -272,73 +279,55 @@ label##_hv: \ _MASKABLE_EXCEPTION_PSERIES(vec, label, \ EXC_HV, SOFTEN_TEST_HV) -#ifdef CONFIG_PPC_ISERIES -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ -BEGIN_FW_FTR_SECTION; \ - stb r11,PACAHARDIRQEN(r13); \ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES); \ - TRACE_DISABLE_INTS; \ -BEGIN_FW_FTR_SECTION; \ - mfmsr r10; \ - ori r10,r10,MSR_EE; \ - mtmsrd r10,1; \ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#else -#define DISABLE_INTS \ - li r11,0; \ - stb r11,PACASOFTIRQEN(r13); \ - stb r11,PACAHARDIRQEN(r13); \ - TRACE_DISABLE_INTS -#endif /* CONFIG_PPC_ISERIES */ +/* + * Our exception common code can be passed various "additions" + * to specify the behaviour of interrupts, whether to kick the + * runlatch, etc... + */ + +/* Exception addition: Hard disable interrupts */ +#define DISABLE_INTS SOFT_DISABLE_INTS(r10,r11) +/* Exception addition: Keep interrupt state */ #define ENABLE_INTS \ + ld r11,PACAKMSR(r13); \ ld r12,_MSR(r1); \ - mfmsr r11; \ rlwimi r11,r12,0,MSR_EE; \ mtmsrd r11,1 -#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except +#define ADD_NVGPRS \ + bl .save_nvgprs + +#define RUNLATCH_ON \ +BEGIN_FTR_SECTION \ + clrrdi r3,r1,THREAD_SHIFT; \ + ld r4,TI_LOCAL_FLAGS(r3); \ + andi. r0,r4,_TLF_RUNLATCH; \ + beql ppc64_runlatch_on_trampoline; \ +END_FTR_SECTION_IFSET(CPU_FTR_CTRL) + +#define EXCEPTION_COMMON(trap, label, hdlr, ret, additions) \ + .align 7; \ + .globl label##_common; \ +label##_common: \ + EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ + additions; \ + addi r3,r1,STACK_FRAME_OVERHEAD; \ + bl hdlr; \ + b ret + +#define STD_EXCEPTION_COMMON(trap, label, hdlr) \ + EXCEPTION_COMMON(trap, label, hdlr, ret_from_except, \ + ADD_NVGPRS;DISABLE_INTS) /* * Like STD_EXCEPTION_COMMON, but for exceptions that can occur - * in the idle task and therefore need the special idle handling. + * in the idle task and therefore need the special idle handling + * (finish nap and runlatch) */ -#define STD_EXCEPTION_COMMON_IDLE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ - bl .save_nvgprs; \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except - -#define STD_EXCEPTION_COMMON_LITE(trap, label, hdlr) \ - .align 7; \ - .globl label##_common; \ -label##_common: \ - EXCEPTION_PROLOG_COMMON(trap, PACA_EXGEN); \ - FINISH_NAP; \ - DISABLE_INTS; \ -BEGIN_FTR_SECTION \ - bl .ppc64_runlatch_on; \ -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) \ - addi r3,r1,STACK_FRAME_OVERHEAD; \ - bl hdlr; \ - b .ret_from_except_lite +#define STD_EXCEPTION_COMMON_ASYNC(trap, label, hdlr) \ + EXCEPTION_COMMON(trap, label, hdlr, ret_from_except_lite, \ + FINISH_NAP;RUNLATCH_ON;DISABLE_INTS) /* * When the idle code in power4_idle puts the CPU into NAP mode, diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h new file mode 100644 index 00000000000..88dbf965918 --- /dev/null +++ b/arch/powerpc/include/asm/fadump.h @@ -0,0 +1,218 @@ +/* + * Firmware Assisted dump header file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2011 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#ifndef __PPC64_FA_DUMP_H__ +#define __PPC64_FA_DUMP_H__ + +#ifdef CONFIG_FA_DUMP + +/* + * The RMA region will be saved for later dumping when kernel crashes. + * RMA is Real Mode Area, the first block of logical memory address owned + * by logical partition, containing the storage that may be accessed with + * translate off. + */ +#define RMA_START 0x0 +#define RMA_END (ppc64_rma_size) + +/* + * On some Power systems where RMO is 128MB, it still requires minimum of + * 256MB for kernel to boot successfully. When kdump infrastructure is + * configured to save vmcore over network, we run into OOM issue while + * loading modules related to network setup. Hence we need aditional 64M + * of memory to avoid OOM issue. + */ +#define MIN_BOOT_MEM (((RMA_END < (0x1UL << 28)) ? (0x1UL << 28) : RMA_END) \ + + (0x1UL << 26)) + +#define memblock_num_regions(memblock_type) (memblock.memblock_type.cnt) + +#ifndef ELF_CORE_EFLAGS +#define ELF_CORE_EFLAGS 0 +#endif + +/* Firmware provided dump sections */ +#define FADUMP_CPU_STATE_DATA 0x0001 +#define FADUMP_HPTE_REGION 0x0002 +#define FADUMP_REAL_MODE_REGION 0x0011 + +/* Dump request flag */ +#define FADUMP_REQUEST_FLAG 0x00000001 + +/* FAD commands */ +#define FADUMP_REGISTER 1 +#define FADUMP_UNREGISTER 2 +#define FADUMP_INVALIDATE 3 + +/* Dump status flag */ +#define FADUMP_ERROR_FLAG 0x2000 + +#define FADUMP_CPU_ID_MASK ((1UL << 32) - 1) + +#define CPU_UNKNOWN (~((u32)0)) + +/* Utility macros */ +#define SKIP_TO_NEXT_CPU(reg_entry) \ +({ \ + while (reg_entry->reg_id != REG_ID("CPUEND")) \ + reg_entry++; \ + reg_entry++; \ +}) + +/* Kernel Dump section info */ +struct fadump_section { + u32 request_flag; + u16 source_data_type; + u16 error_flags; + u64 source_address; + u64 source_len; + u64 bytes_dumped; + u64 destination_address; +}; + +/* ibm,configure-kernel-dump header. */ +struct fadump_section_header { + u32 dump_format_version; + u16 dump_num_sections; + u16 dump_status_flag; + u32 offset_first_dump_section; + + /* Fields for disk dump option. */ + u32 dd_block_size; + u64 dd_block_offset; + u64 dd_num_blocks; + u32 dd_offset_disk_path; + + /* Maximum time allowed to prevent an automatic dump-reboot. */ + u32 max_time_auto; +}; + +/* + * Firmware Assisted dump memory structure. This structure is required for + * registering future kernel dump with power firmware through rtas call. + * + * No disk dump option. Hence disk dump path string section is not included. + */ +struct fadump_mem_struct { + struct fadump_section_header header; + + /* Kernel dump sections */ + struct fadump_section cpu_state_data; + struct fadump_section hpte_region; + struct fadump_section rmr_region; +}; + +/* Firmware-assisted dump configuration details. */ +struct fw_dump { + unsigned long cpu_state_data_size; + unsigned long hpte_region_size; + unsigned long boot_memory_size; + unsigned long reserve_dump_area_start; + unsigned long reserve_dump_area_size; + /* cmd line option during boot */ + unsigned long reserve_bootvar; + + unsigned long fadumphdr_addr; + unsigned long cpu_notes_buf; + unsigned long cpu_notes_buf_size; + + int ibm_configure_kernel_dump; + + unsigned long fadump_enabled:1; + unsigned long fadump_supported:1; + unsigned long dump_active:1; + unsigned long dump_registered:1; +}; + +/* + * Copy the ascii values for first 8 characters from a string into u64 + * variable at their respective indexes. + * e.g. + * The string "FADMPINF" will be converted into 0x4641444d50494e46 + */ +static inline u64 str_to_u64(const char *str) +{ + u64 val = 0; + int i; + + for (i = 0; i < sizeof(val); i++) + val = (*str) ? (val << 8) | *str++ : val << 8; + return val; +} +#define STR_TO_HEX(x) str_to_u64(x) +#define REG_ID(x) str_to_u64(x) + +#define FADUMP_CRASH_INFO_MAGIC STR_TO_HEX("FADMPINF") +#define REGSAVE_AREA_MAGIC STR_TO_HEX("REGSAVE") + +/* The firmware-assisted dump format. + * + * The register save area is an area in the partition's memory used to preserve + * the register contents (CPU state data) for the active CPUs during a firmware + * assisted dump. The dump format contains register save area header followed + * by register entries. Each list of registers for a CPU starts with + * "CPUSTRT" and ends with "CPUEND". + */ + +/* Register save area header. */ +struct fadump_reg_save_area_header { + u64 magic_number; + u32 version; + u32 num_cpu_offset; +}; + +/* Register entry. */ +struct fadump_reg_entry { + u64 reg_id; + u64 reg_value; +}; + +/* fadump crash info structure */ +struct fadump_crash_info_header { + u64 magic_number; + u64 elfcorehdr_addr; + u32 crashing_cpu; + struct pt_regs regs; + struct cpumask cpu_online_mask; +}; + +/* Crash memory ranges */ +#define INIT_CRASHMEM_RANGES (INIT_MEMBLOCK_REGIONS + 2) + +struct fad_crash_memory_ranges { + unsigned long long base; + unsigned long long size; +}; + +extern int early_init_dt_scan_fw_dump(unsigned long node, + const char *uname, int depth, void *data); +extern int fadump_reserve_mem(void); +extern int setup_fadump(void); +extern int is_fadump_active(void); +extern void crash_fadump(struct pt_regs *, const char *); +extern void fadump_cleanup(void); + +extern void vmcore_cleanup(void); +#else /* CONFIG_FA_DUMP */ +static inline int is_fadump_active(void) { return 0; } +static inline void crash_fadump(struct pt_regs *regs, const char *str) { } +#endif +#endif diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h index 14db29b18d0..ad0b751b0d7 100644 --- a/arch/powerpc/include/asm/firmware.h +++ b/arch/powerpc/include/asm/firmware.h @@ -41,7 +41,6 @@ #define FW_FEATURE_XDABR ASM_CONST(0x0000000000040000) #define FW_FEATURE_MULTITCE ASM_CONST(0x0000000000080000) #define FW_FEATURE_SPLPAR ASM_CONST(0x0000000000100000) -#define FW_FEATURE_ISERIES ASM_CONST(0x0000000000200000) #define FW_FEATURE_LPAR ASM_CONST(0x0000000000400000) #define FW_FEATURE_PS3_LV1 ASM_CONST(0x0000000000800000) #define FW_FEATURE_BEAT ASM_CONST(0x0000000001000000) @@ -65,8 +64,6 @@ enum { FW_FEATURE_MULTITCE | FW_FEATURE_SPLPAR | FW_FEATURE_LPAR | FW_FEATURE_CMO | FW_FEATURE_VPHN | FW_FEATURE_XCMO, FW_FEATURE_PSERIES_ALWAYS = 0, - FW_FEATURE_ISERIES_POSSIBLE = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, - FW_FEATURE_ISERIES_ALWAYS = FW_FEATURE_ISERIES | FW_FEATURE_LPAR, FW_FEATURE_POWERNV_POSSIBLE = FW_FEATURE_OPAL | FW_FEATURE_OPALv2, FW_FEATURE_POWERNV_ALWAYS = 0, FW_FEATURE_PS3_POSSIBLE = FW_FEATURE_LPAR | FW_FEATURE_PS3_LV1, @@ -79,9 +76,6 @@ enum { #ifdef CONFIG_PPC_PSERIES FW_FEATURE_PSERIES_POSSIBLE | #endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_POSSIBLE | -#endif #ifdef CONFIG_PPC_POWERNV FW_FEATURE_POWERNV_POSSIBLE | #endif @@ -99,9 +93,6 @@ enum { #ifdef CONFIG_PPC_PSERIES FW_FEATURE_PSERIES_ALWAYS & #endif -#ifdef CONFIG_PPC_ISERIES - FW_FEATURE_ISERIES_ALWAYS & -#endif #ifdef CONFIG_PPC_POWERNV FW_FEATURE_POWERNV_ALWAYS & #endif diff --git a/arch/powerpc/include/asm/fsl_guts.h b/arch/powerpc/include/asm/fsl_guts.h index bebd12463ec..ce04530d200 100644 --- a/arch/powerpc/include/asm/fsl_guts.h +++ b/arch/powerpc/include/asm/fsl_guts.h @@ -4,7 +4,7 @@ * Authors: Jeff Brown * Timur Tabi <timur@freescale.com> * - * Copyright 2004,2007 Freescale Semiconductor, Inc + * Copyright 2004,2007,2012 Freescale Semiconductor, Inc * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -114,6 +114,10 @@ struct ccsr_guts_86xx { __be32 srds2cr1; /* 0x.0f44 - SerDes2 Control Register 0 */ } __attribute__ ((packed)); + +/* Alternate function signal multiplex control */ +#define MPC85xx_PMUXCR_QE(x) (0x8000 >> (x)) + #ifdef CONFIG_PPC_86xx #define CCSR_GUTS_DMACR_DEV_SSI 0 /* DMA controller/channel set to SSI */ diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index bb712c9488b..51010bfc792 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -11,6 +11,27 @@ #include <asm/ptrace.h> #include <asm/processor.h> +#ifdef CONFIG_PPC64 + +/* + * PACA flags in paca->irq_happened. + * + * This bits are set when interrupts occur while soft-disabled + * and allow a proper replay. Additionally, PACA_IRQ_HARD_DIS + * is set whenever we manually hard disable. + */ +#define PACA_IRQ_HARD_DIS 0x01 +#define PACA_IRQ_DBELL 0x02 +#define PACA_IRQ_EE 0x04 +#define PACA_IRQ_DEC 0x08 /* Or FIT */ +#define PACA_IRQ_EE_EDGE 0x10 /* BookE only */ + +#endif /* CONFIG_PPC64 */ + +#ifndef __ASSEMBLY__ + +extern void __replay_interrupt(unsigned int vector); + extern void timer_interrupt(struct pt_regs *); #ifdef CONFIG_PPC64 @@ -42,7 +63,6 @@ static inline unsigned long arch_local_irq_disable(void) } extern void arch_local_irq_restore(unsigned long); -extern void iseries_handle_interrupts(void); static inline void arch_local_irq_enable(void) { @@ -68,16 +88,33 @@ static inline bool arch_irqs_disabled(void) #define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory"); #define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory"); #else -#define __hard_irq_enable() __mtmsrd(mfmsr() | MSR_EE, 1) -#define __hard_irq_disable() __mtmsrd(mfmsr() & ~MSR_EE, 1) +#define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1) +#define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1) #endif -#define hard_irq_disable() \ - do { \ - __hard_irq_disable(); \ - get_paca()->soft_enabled = 0; \ - get_paca()->hard_enabled = 0; \ - } while(0) +static inline void hard_irq_disable(void) +{ + __hard_irq_disable(); + get_paca()->soft_enabled = 0; + get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; +} + +/* + * This is called by asynchronous interrupts to conditionally + * re-enable hard interrupts when soft-disabled after having + * cleared the source of the interrupt + */ +static inline void may_hard_irq_enable(void) +{ + get_paca()->irq_happened &= ~PACA_IRQ_HARD_DIS; + if (!(get_paca()->irq_happened & PACA_IRQ_EE)) + __hard_irq_enable(); +} + +static inline bool arch_irq_disabled_regs(struct pt_regs *regs) +{ + return !regs->softe; +} #else /* CONFIG_PPC64 */ @@ -139,6 +176,13 @@ static inline bool arch_irqs_disabled(void) #define hard_irq_disable() arch_local_irq_disable() +static inline bool arch_irq_disabled_regs(struct pt_regs *regs) +{ + return !(regs->msr & MSR_EE); +} + +static inline void may_hard_irq_enable(void) { } + #endif /* CONFIG_PPC64 */ #define ARCH_IRQ_INIT_FLAGS IRQ_NOREQUEST @@ -149,5 +193,6 @@ static inline bool arch_irqs_disabled(void) */ struct irq_chip; +#endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_HW_IRQ_H */ diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h index b0b06d85788..6f9b6e23dc5 100644 --- a/arch/powerpc/include/asm/irqflags.h +++ b/arch/powerpc/include/asm/irqflags.h @@ -39,24 +39,31 @@ #define TRACE_ENABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on) #define TRACE_DISABLE_INTS TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off) -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) \ - cmpdi en,0; \ - bne 95f; \ - stb en,PACASOFTIRQEN(r13); \ - TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_off) \ - b skip; \ -95: TRACE_WITH_FRAME_BUFFER(.trace_hardirqs_on) \ - li en,1; -#define TRACE_AND_RESTORE_IRQ(en) \ - TRACE_AND_RESTORE_IRQ_PARTIAL(en,96f); \ - stb en,PACASOFTIRQEN(r13); \ -96: +/* + * This is used by assembly code to soft-disable interrupts + */ +#define SOFT_DISABLE_INTS(__rA, __rB) \ + lbz __rA,PACASOFTIRQEN(r13); \ + lbz __rB,PACAIRQHAPPENED(r13); \ + cmpwi cr0,__rA,0; \ + li __rA,0; \ + ori __rB,__rB,PACA_IRQ_HARD_DIS; \ + stb __rB,PACAIRQHAPPENED(r13); \ + beq 44f; \ + stb __rA,PACASOFTIRQEN(r13); \ + TRACE_DISABLE_INTS; \ +44: + #else #define TRACE_ENABLE_INTS #define TRACE_DISABLE_INTS -#define TRACE_AND_RESTORE_IRQ_PARTIAL(en,skip) -#define TRACE_AND_RESTORE_IRQ(en) \ - stb en,PACASOFTIRQEN(r13) + +#define SOFT_DISABLE_INTS(__rA, __rB) \ + lbz __rA,PACAIRQHAPPENED(r13); \ + li __rB,0; \ + ori __rA,__rA,PACA_IRQ_HARD_DIS; \ + stb __rB,PACASOFTIRQEN(r13); \ + stb __rA,PACAIRQHAPPENED(r13) #endif #endif diff --git a/arch/powerpc/include/asm/iseries/alpaca.h b/arch/powerpc/include/asm/iseries/alpaca.h deleted file mode 100644 index c0cce6727a6..00000000000 --- a/arch/powerpc/include/asm/iseries/alpaca.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Copyright © 2008 Stephen Rothwell IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_ALPACA_H -#define _ASM_POWERPC_ISERIES_ALPACA_H - -/* - * This is the part of the paca that the iSeries hypervisor - * needs to be statically initialised. Immediately after boot - * we switch to the normal Linux paca. - */ -struct alpaca { - struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */ - const void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */ -}; - -#endif /* _ASM_POWERPC_ISERIES_ALPACA_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call.h b/arch/powerpc/include/asm/iseries/hv_call.h deleted file mode 100644 index 162d653ad51..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_call.h +++ /dev/null @@ -1,111 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_H -#define _ASM_POWERPC_ISERIES_HV_CALL_H - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> -#include <asm/paca.h> - -/* Type of yield for HvCallBaseYieldProcessor */ -#define HvCall_YieldTimed 0 /* Yield until specified time (tb) */ -#define HvCall_YieldToActive 1 /* Yield until all active procs have run */ -#define HvCall_YieldToProc 2 /* Yield until the specified processor has run */ - -/* interrupt masks for setEnabledInterrupts */ -#define HvCall_MaskIPI 0x00000001 -#define HvCall_MaskLpEvent 0x00000002 -#define HvCall_MaskLpProd 0x00000004 -#define HvCall_MaskTimeout 0x00000008 - -/* Log buffer formats */ -#define HvCall_LogBuffer_ASCII 0 -#define HvCall_LogBuffer_EBCDIC 1 - -#define HvCallBaseAckDeferredInts HvCallBase + 0 -#define HvCallBaseCpmPowerOff HvCallBase + 1 -#define HvCallBaseGetHwPatch HvCallBase + 2 -#define HvCallBaseReIplSpAttn HvCallBase + 3 -#define HvCallBaseSetASR HvCallBase + 4 -#define HvCallBaseSetASRAndRfi HvCallBase + 5 -#define HvCallBaseSetIMR HvCallBase + 6 -#define HvCallBaseSendIPI HvCallBase + 7 -#define HvCallBaseTerminateMachine HvCallBase + 8 -#define HvCallBaseTerminateMachineSrc HvCallBase + 9 -#define HvCallBaseProcessPlicInterrupts HvCallBase + 10 -#define HvCallBaseIsPrimaryCpmOrMsdIpl HvCallBase + 11 -#define HvCallBaseSetVirtualSIT HvCallBase + 12 -#define HvCallBaseVaryOffThisProcessor HvCallBase + 13 -#define HvCallBaseVaryOffMemoryChunk HvCallBase + 14 -#define HvCallBaseVaryOffInteractivePercentage HvCallBase + 15 -#define HvCallBaseSendLpProd HvCallBase + 16 -#define HvCallBaseSetEnabledInterrupts HvCallBase + 17 -#define HvCallBaseYieldProcessor HvCallBase + 18 -#define HvCallBaseVaryOffSharedProcUnits HvCallBase + 19 -#define HvCallBaseSetVirtualDecr HvCallBase + 20 -#define HvCallBaseClearLogBuffer HvCallBase + 21 -#define HvCallBaseGetLogBufferCodePage HvCallBase + 22 -#define HvCallBaseGetLogBufferFormat HvCallBase + 23 -#define HvCallBaseGetLogBufferLength HvCallBase + 24 -#define HvCallBaseReadLogBuffer HvCallBase + 25 -#define HvCallBaseSetLogBufferFormatAndCodePage HvCallBase + 26 -#define HvCallBaseWriteLogBuffer HvCallBase + 27 -#define HvCallBaseRouter28 HvCallBase + 28 -#define HvCallBaseRouter29 HvCallBase + 29 -#define HvCallBaseRouter30 HvCallBase + 30 -#define HvCallBaseSetDebugBus HvCallBase + 31 - -#define HvCallCcSetDABR HvCallCc + 7 - -static inline void HvCall_setVirtualDecr(void) -{ - /* - * Ignore any error return codes - most likely means that the - * target value for the LP has been increased and this vary off - * would bring us below the new target. - */ - HvCall0(HvCallBaseSetVirtualDecr); -} - -static inline void HvCall_yieldProcessor(unsigned typeOfYield, u64 yieldParm) -{ - HvCall2(HvCallBaseYieldProcessor, typeOfYield, yieldParm); -} - -static inline void HvCall_setEnabledInterrupts(u64 enabledInterrupts) -{ - HvCall1(HvCallBaseSetEnabledInterrupts, enabledInterrupts); -} - -static inline void HvCall_setLogBufferFormatAndCodepage(int format, - u32 codePage) -{ - HvCall2(HvCallBaseSetLogBufferFormatAndCodePage, format, codePage); -} - -extern void HvCall_writeLogBuffer(const void *buffer, u64 bufLen); - -static inline void HvCall_sendIPI(struct paca_struct *targetPaca) -{ - HvCall1(HvCallBaseSendIPI, targetPaca->paca_index); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_event.h b/arch/powerpc/include/asm/iseries/hv_call_event.h deleted file mode 100644 index cc029d388e1..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_call_event.h +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H - -#include <linux/types.h> -#include <linux/dma-mapping.h> - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> -#include <asm/abs_addr.h> - -struct HvLpEvent; - -typedef u8 HvLpEvent_Type; -typedef u8 HvLpEvent_AckInd; -typedef u8 HvLpEvent_AckType; - -typedef u8 HvLpDma_Direction; -typedef u8 HvLpDma_AddressType; - -typedef u64 HvLpEvent_Rc; -typedef u64 HvLpDma_Rc; - -#define HvCallEventAckLpEvent HvCallEvent + 0 -#define HvCallEventCancelLpEvent HvCallEvent + 1 -#define HvCallEventCloseLpEventPath HvCallEvent + 2 -#define HvCallEventDmaBufList HvCallEvent + 3 -#define HvCallEventDmaSingle HvCallEvent + 4 -#define HvCallEventDmaToSp HvCallEvent + 5 -#define HvCallEventGetOverflowLpEvents HvCallEvent + 6 -#define HvCallEventGetSourceLpInstanceId HvCallEvent + 7 -#define HvCallEventGetTargetLpInstanceId HvCallEvent + 8 -#define HvCallEventOpenLpEventPath HvCallEvent + 9 -#define HvCallEventSetLpEventStack HvCallEvent + 10 -#define HvCallEventSignalLpEvent HvCallEvent + 11 -#define HvCallEventSignalLpEventParms HvCallEvent + 12 -#define HvCallEventSetInterLpQueueIndex HvCallEvent + 13 -#define HvCallEventSetLpEventQueueInterruptProc HvCallEvent + 14 -#define HvCallEventRouter15 HvCallEvent + 15 - -static inline void HvCallEvent_getOverflowLpEvents(u8 queueIndex) -{ - HvCall1(HvCallEventGetOverflowLpEvents, queueIndex); -} - -static inline void HvCallEvent_setInterLpQueueIndex(u8 queueIndex) -{ - HvCall1(HvCallEventSetInterLpQueueIndex, queueIndex); -} - -static inline void HvCallEvent_setLpEventStack(u8 queueIndex, - char *eventStackAddr, u32 eventStackSize) -{ - HvCall3(HvCallEventSetLpEventStack, queueIndex, - virt_to_abs(eventStackAddr), eventStackSize); -} - -static inline void HvCallEvent_setLpEventQueueInterruptProc(u8 queueIndex, - u16 lpLogicalProcIndex) -{ - HvCall2(HvCallEventSetLpEventQueueInterruptProc, queueIndex, - lpLogicalProcIndex); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventSignalLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_signalLpEventFast(HvLpIndex targetLp, - HvLpEvent_Type type, u16 subtype, HvLpEvent_AckInd ackInd, - HvLpEvent_AckType ackType, HvLpInstanceId sourceInstanceId, - HvLpInstanceId targetInstanceId, u64 correlationToken, - u64 eventData1, u64 eventData2, u64 eventData3, - u64 eventData4, u64 eventData5) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 ack_and_target; - u8 type; - u16 subtype; - HvLpInstanceId src_inst; - HvLpInstanceId target_inst; - } parms; - u64 dword; - } packed; - - packed.parms.ack_and_target = (ackType << 7) | (ackInd << 6) | targetLp; - packed.parms.type = type; - packed.parms.subtype = subtype; - packed.parms.src_inst = sourceInstanceId; - packed.parms.target_inst = targetInstanceId; - - return HvCall7(HvCallEventSignalLpEventParms, packed.dword, - correlationToken, eventData1, eventData2, - eventData3, eventData4, eventData5); -} - -extern void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag); -extern void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle); -extern dma_addr_t iseries_hv_map(void *vaddr, size_t size, - enum dma_data_direction direction); -extern void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction); - -static inline HvLpEvent_Rc HvCallEvent_ackLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventAckLpEvent, virt_to_abs(event)); -} - -static inline HvLpEvent_Rc HvCallEvent_cancelLpEvent(struct HvLpEvent *event) -{ - return HvCall1(HvCallEventCancelLpEvent, virt_to_abs(event)); -} - -static inline HvLpInstanceId HvCallEvent_getSourceLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetSourceLpInstanceId, targetLp, type); -} - -static inline HvLpInstanceId HvCallEvent_getTargetLpInstanceId( - HvLpIndex targetLp, HvLpEvent_Type type) -{ - return HvCall2(HvCallEventGetTargetLpInstanceId, targetLp, type); -} - -static inline void HvCallEvent_openLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventOpenLpEventPath, targetLp, type); -} - -static inline void HvCallEvent_closeLpEventPath(HvLpIndex targetLp, - HvLpEvent_Type type) -{ - HvCall2(HvCallEventCloseLpEventPath, targetLp, type); -} - -static inline HvLpDma_Rc HvCallEvent_dmaBufList(HvLpEvent_Type type, - HvLpIndex remoteLp, HvLpDma_Direction direction, - HvLpInstanceId localInstanceId, - HvLpInstanceId remoteInstanceId, - HvLpDma_AddressType localAddressType, - HvLpDma_AddressType remoteAddressType, - /* Do these need to be converted to absolute addresses? */ - u64 localBufList, u64 remoteBufList, u32 transferLength) -{ - /* Pack the misc bits into a single Dword to pass to PLIC */ - union { - struct { - u8 flags; - HvLpIndex remote; - u8 type; - u8 reserved; - HvLpInstanceId local_inst; - HvLpInstanceId remote_inst; - } parms; - u64 dword; - } packed; - - packed.parms.flags = (direction << 7) | - (localAddressType << 6) | (remoteAddressType << 5); - packed.parms.remote = remoteLp; - packed.parms.type = type; - packed.parms.reserved = 0; - packed.parms.local_inst = localInstanceId; - packed.parms.remote_inst = remoteInstanceId; - - return HvCall4(HvCallEventDmaBufList, packed.dword, localBufList, - remoteBufList, transferLength); -} - -static inline HvLpDma_Rc HvCallEvent_dmaToSp(void *local, u32 remote, - u32 length, HvLpDma_Direction dir) -{ - return HvCall4(HvCallEventDmaToSp, virt_to_abs(local), remote, - length, dir); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_sc.h b/arch/powerpc/include/asm/iseries/hv_call_sc.h deleted file mode 100644 index f5d21095925..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_call_sc.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_SC_H -#define _ASM_POWERPC_ISERIES_HV_CALL_SC_H - -#include <linux/types.h> - -#define HvCallBase 0x8000000000000000ul -#define HvCallCc 0x8001000000000000ul -#define HvCallCfg 0x8002000000000000ul -#define HvCallEvent 0x8003000000000000ul -#define HvCallHpt 0x8004000000000000ul -#define HvCallPci 0x8005000000000000ul -#define HvCallSm 0x8007000000000000ul -#define HvCallXm 0x8009000000000000ul - -extern u64 HvCall0(u64); -extern u64 HvCall1(u64, u64); -extern u64 HvCall2(u64, u64, u64); -extern u64 HvCall3(u64, u64, u64, u64); -extern u64 HvCall4(u64, u64, u64, u64, u64); -extern u64 HvCall5(u64, u64, u64, u64, u64, u64); -extern u64 HvCall6(u64, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7(u64, u64, u64, u64, u64, u64, u64, u64); - -extern u64 HvCall0Ret16(u64, void *); -extern u64 HvCall1Ret16(u64, void *, u64); -extern u64 HvCall2Ret16(u64, void *, u64, u64); -extern u64 HvCall3Ret16(u64, void *, u64, u64, u64); -extern u64 HvCall4Ret16(u64, void *, u64, u64, u64, u64); -extern u64 HvCall5Ret16(u64, void *, u64, u64, u64, u64, u64); -extern u64 HvCall6Ret16(u64, void *, u64, u64, u64, u64, u64, u64); -extern u64 HvCall7Ret16(u64, void *, u64, u64 ,u64 ,u64 ,u64 ,u64 ,u64); - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_SC_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_call_xm.h b/arch/powerpc/include/asm/iseries/hv_call_xm.h deleted file mode 100644 index 392ac3f54df..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_call_xm.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from SLIC. - */ -#ifndef _ASM_POWERPC_ISERIES_HV_CALL_XM_H -#define _ASM_POWERPC_ISERIES_HV_CALL_XM_H - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> - -#define HvCallXmGetTceTableParms HvCallXm + 0 -#define HvCallXmTestBus HvCallXm + 1 -#define HvCallXmConnectBusUnit HvCallXm + 2 -#define HvCallXmLoadTod HvCallXm + 8 -#define HvCallXmTestBusUnit HvCallXm + 9 -#define HvCallXmSetTce HvCallXm + 11 -#define HvCallXmSetTces HvCallXm + 13 - -static inline void HvCallXm_getTceTableParms(u64 cb) -{ - HvCall1(HvCallXmGetTceTableParms, cb); -} - -static inline u64 HvCallXm_setTce(u64 tceTableToken, u64 tceOffset, u64 tce) -{ - return HvCall3(HvCallXmSetTce, tceTableToken, tceOffset, tce); -} - -static inline u64 HvCallXm_setTces(u64 tceTableToken, u64 tceOffset, - u64 numTces, u64 tce1, u64 tce2, u64 tce3, u64 tce4) -{ - return HvCall7(HvCallXmSetTces, tceTableToken, tceOffset, numTces, - tce1, tce2, tce3, tce4); -} - -static inline u64 HvCallXm_testBus(u16 busNumber) -{ - return HvCall1(HvCallXmTestBus, busNumber); -} - -static inline u64 HvCallXm_testBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId) -{ - return HvCall2(HvCallXmTestBusUnit, busNumber, - (subBusNumber << 8) | deviceId); -} - -static inline u64 HvCallXm_connectBusUnit(u16 busNumber, u8 subBusNumber, - u8 deviceId, u64 interruptToken) -{ - return HvCall5(HvCallXmConnectBusUnit, busNumber, - (subBusNumber << 8) | deviceId, interruptToken, 0, - 0 /* HvLpConfig::mapDsaToQueueIndex(HvLpDSA(busNumber, xBoard, xCard)) */); -} - -static inline u64 HvCallXm_loadTod(void) -{ - return HvCall0(HvCallXmLoadTod); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_CALL_XM_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_config.h b/arch/powerpc/include/asm/iseries/hv_lp_config.h deleted file mode 100644 index a006fd1e4a2..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_lp_config.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H -#define _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H - -/* - * This file contains the interface to the LPAR configuration data - * to determine which resources should be allocated to each partition. - */ - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> - -enum { - HvCallCfg_Cur = 0, - HvCallCfg_Init = 1, - HvCallCfg_Max = 2, - HvCallCfg_Min = 3 -}; - -#define HvCallCfgGetSystemPhysicalProcessors HvCallCfg + 6 -#define HvCallCfgGetPhysicalProcessors HvCallCfg + 7 -#define HvCallCfgGetMsChunks HvCallCfg + 9 -#define HvCallCfgGetSharedPoolIndex HvCallCfg + 20 -#define HvCallCfgGetSharedProcUnits HvCallCfg + 21 -#define HvCallCfgGetNumProcsInSharedPool HvCallCfg + 22 -#define HvCallCfgGetVirtualLanIndexMap HvCallCfg + 30 -#define HvCallCfgGetHostingLpIndex HvCallCfg + 32 - -extern HvLpIndex HvLpConfig_getLpIndex_outline(void); -extern HvLpIndex HvLpConfig_getLpIndex(void); -extern HvLpIndex HvLpConfig_getPrimaryLpIndex(void); - -static inline u64 HvLpConfig_getMsChunks(void) -{ - return HvCall2(HvCallCfgGetMsChunks, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getSystemPhysicalProcessors(void) -{ - return HvCall0(HvCallCfgGetSystemPhysicalProcessors); -} - -static inline u64 HvLpConfig_getNumProcsInSharedPool(HvLpSharedPoolIndex sPI) -{ - return (u16)HvCall1(HvCallCfgGetNumProcsInSharedPool, sPI); -} - -static inline u64 HvLpConfig_getPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline HvLpSharedPoolIndex HvLpConfig_getSharedPoolIndex(void) -{ - return HvCall1(HvCallCfgGetSharedPoolIndex, HvLpConfig_getLpIndex()); -} - -static inline u64 HvLpConfig_getSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Cur); -} - -static inline u64 HvLpConfig_getMaxSharedProcUnits(void) -{ - return HvCall2(HvCallCfgGetSharedProcUnits, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline u64 HvLpConfig_getMaxPhysicalProcessors(void) -{ - return HvCall2(HvCallCfgGetPhysicalProcessors, HvLpConfig_getLpIndex(), - HvCallCfg_Max); -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMapForLp( - HvLpIndex lp) -{ - /* - * This is a new function in V5R1 so calls to this on older - * hypervisors will return -1 - */ - u64 retVal = HvCall1(HvCallCfgGetVirtualLanIndexMap, lp); - if (retVal == -1) - retVal = 0; - return retVal; -} - -static inline HvLpVirtualLanIndexMap HvLpConfig_getVirtualLanIndexMap(void) -{ - return HvLpConfig_getVirtualLanIndexMapForLp( - HvLpConfig_getLpIndex_outline()); -} - -static inline int HvLpConfig_doLpsCommunicateOnVirtualLan(HvLpIndex lp1, - HvLpIndex lp2) -{ - HvLpVirtualLanIndexMap virtualLanIndexMap1 = - HvLpConfig_getVirtualLanIndexMapForLp(lp1); - HvLpVirtualLanIndexMap virtualLanIndexMap2 = - HvLpConfig_getVirtualLanIndexMapForLp(lp2); - return ((virtualLanIndexMap1 & virtualLanIndexMap2) != 0); -} - -static inline HvLpIndex HvLpConfig_getHostingLpIndex(HvLpIndex lp) -{ - return HvCall1(HvCallCfgGetHostingLpIndex, lp); -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_CONFIG_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_lp_event.h b/arch/powerpc/include/asm/iseries/hv_lp_event.h deleted file mode 100644 index 8f5da7d7720..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_lp_event.h +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* This file contains the class for HV events in the system. */ - -#ifndef _ASM_POWERPC_ISERIES_HV_LP_EVENT_H -#define _ASM_POWERPC_ISERIES_HV_LP_EVENT_H - -#include <asm/types.h> -#include <asm/ptrace.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_call_event.h> - -/* - * HvLpEvent is the structure for Lp Event messages passed between - * partitions through PLIC. - */ - -struct HvLpEvent { - u8 flags; /* Event flags x00-x00 */ - u8 xType; /* Type of message x01-x01 */ - u16 xSubtype; /* Subtype for event x02-x03 */ - u8 xSourceLp; /* Source LP x04-x04 */ - u8 xTargetLp; /* Target LP x05-x05 */ - u8 xSizeMinus1; /* Size of Derived class - 1 x06-x06 */ - u8 xRc; /* RC for Ack flows x07-x07 */ - u16 xSourceInstanceId; /* Source sides instance id x08-x09 */ - u16 xTargetInstanceId; /* Target sides instance id x0A-x0B */ - union { - u32 xSubtypeData; /* Data usable by the subtype x0C-x0F */ - u16 xSubtypeDataShort[2]; /* Data as 2 shorts */ - u8 xSubtypeDataChar[4]; /* Data as 4 chars */ - } x; - - u64 xCorrelationToken; /* Unique value for source/type x10-x17 */ -}; - -typedef void (*LpEventHandler)(struct HvLpEvent *); - -/* Register a handler for an event type - returns 0 on success */ -extern int HvLpEvent_registerHandler(HvLpEvent_Type eventType, - LpEventHandler hdlr); - -/* - * Unregister a handler for an event type - * - * This call will sleep until the handler being removed is guaranteed to - * be no longer executing on any CPU. Do not call with locks held. - * - * returns 0 on success - * Unregister will fail if there are any paths open for the type - */ -extern int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType); - -/* - * Open an Lp Event Path for an event type - * returns 0 on success - * openPath will fail if there is no handler registered for the event type. - * The lpIndex specified is the partition index for the target partition - * (for VirtualIo, VirtualLan and SessionMgr) other types specify zero) - */ -extern int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -/* - * Close an Lp Event Path for a type and partition - * returns 0 on success - */ -extern int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex); - -#define HvLpEvent_Type_Hypervisor 0 -#define HvLpEvent_Type_MachineFac 1 -#define HvLpEvent_Type_SessionMgr 2 -#define HvLpEvent_Type_SpdIo 3 -#define HvLpEvent_Type_VirtualBus 4 -#define HvLpEvent_Type_PciIo 5 -#define HvLpEvent_Type_RioIo 6 -#define HvLpEvent_Type_VirtualLan 7 -#define HvLpEvent_Type_VirtualIo 8 -#define HvLpEvent_Type_NumTypes 9 - -#define HvLpEvent_Rc_Good 0 -#define HvLpEvent_Rc_BufferNotAvailable 1 -#define HvLpEvent_Rc_Cancelled 2 -#define HvLpEvent_Rc_GenericError 3 -#define HvLpEvent_Rc_InvalidAddress 4 -#define HvLpEvent_Rc_InvalidPartition 5 -#define HvLpEvent_Rc_InvalidSize 6 -#define HvLpEvent_Rc_InvalidSubtype 7 -#define HvLpEvent_Rc_InvalidSubtypeData 8 -#define HvLpEvent_Rc_InvalidType 9 -#define HvLpEvent_Rc_PartitionDead 10 -#define HvLpEvent_Rc_PathClosed 11 -#define HvLpEvent_Rc_SubtypeError 12 - -#define HvLpEvent_Function_Ack 0 -#define HvLpEvent_Function_Int 1 - -#define HvLpEvent_AckInd_NoAck 0 -#define HvLpEvent_AckInd_DoAck 1 - -#define HvLpEvent_AckType_ImmediateAck 0 -#define HvLpEvent_AckType_DeferredAck 1 - -#define HV_LP_EVENT_INT 0x01 -#define HV_LP_EVENT_DO_ACK 0x02 -#define HV_LP_EVENT_DEFERRED_ACK 0x04 -#define HV_LP_EVENT_VALID 0x80 - -#define HvLpDma_Direction_LocalToRemote 0 -#define HvLpDma_Direction_RemoteToLocal 1 - -#define HvLpDma_AddressType_TceIndex 0 -#define HvLpDma_AddressType_RealAddress 1 - -#define HvLpDma_Rc_Good 0 -#define HvLpDma_Rc_Error 1 -#define HvLpDma_Rc_PartitionDead 2 -#define HvLpDma_Rc_PathClosed 3 -#define HvLpDma_Rc_InvalidAddress 4 -#define HvLpDma_Rc_InvalidLength 5 - -static inline int hvlpevent_is_valid(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_VALID; -} - -static inline void hvlpevent_invalidate(struct HvLpEvent *h) -{ - h->flags &= ~ HV_LP_EVENT_VALID; -} - -static inline int hvlpevent_is_int(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_INT; -} - -static inline int hvlpevent_is_ack(struct HvLpEvent *h) -{ - return !hvlpevent_is_int(h); -} - -static inline int hvlpevent_need_ack(struct HvLpEvent *h) -{ - return h->flags & HV_LP_EVENT_DO_ACK; -} - -#endif /* _ASM_POWERPC_ISERIES_HV_LP_EVENT_H */ diff --git a/arch/powerpc/include/asm/iseries/hv_types.h b/arch/powerpc/include/asm/iseries/hv_types.h deleted file mode 100644 index c3e6d2a1d1c..00000000000 --- a/arch/powerpc/include/asm/iseries/hv_types.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_HV_TYPES_H -#define _ASM_POWERPC_ISERIES_HV_TYPES_H - -/* - * General typedefs for the hypervisor. - */ - -#include <asm/types.h> - -typedef u8 HvLpIndex; -typedef u16 HvLpInstanceId; -typedef u64 HvLpTOD; -typedef u64 HvLpSystemSerialNum; -typedef u8 HvLpDeviceSerialNum[12]; -typedef u16 HvLpSanHwSet; -typedef u16 HvLpBus; -typedef u16 HvLpBoard; -typedef u16 HvLpCard; -typedef u8 HvLpDeviceType[4]; -typedef u8 HvLpDeviceModel[3]; -typedef u64 HvIoToken; -typedef u8 HvLpName[8]; -typedef u32 HvIoId; -typedef u64 HvRealMemoryIndex; -typedef u32 HvLpIndexMap; /* Must hold HVMAXARCHITECTEDLPS bits!!! */ -typedef u16 HvLpVrmIndex; -typedef u32 HvXmGenerationId; -typedef u8 HvLpBusPool; -typedef u8 HvLpSharedPoolIndex; -typedef u16 HvLpSharedProcUnitsX100; -typedef u8 HvLpVirtualLanIndex; -typedef u16 HvLpVirtualLanIndexMap; /* Must hold HVMAXARCHITECTEDVIRTUALLANS bits!!! */ -typedef u16 HvBusNumber; /* Hypervisor Bus Number */ -typedef u8 HvSubBusNumber; /* Hypervisor SubBus Number */ -typedef u8 HvAgentId; /* Hypervisor DevFn */ - - -#define HVMAXARCHITECTEDLPS 32 -#define HVMAXARCHITECTEDVIRTUALLANS 16 -#define HVMAXARCHITECTEDVIRTUALDISKS 32 -#define HVMAXARCHITECTEDVIRTUALCDROMS 8 -#define HVMAXARCHITECTEDVIRTUALTAPES 8 -#define HVCHUNKSIZE (256 * 1024) -#define HVPAGESIZE (4 * 1024) -#define HVLPMINMEGSPRIMARY 256 -#define HVLPMINMEGSSECONDARY 64 -#define HVCHUNKSPERMEG 4 -#define HVPAGESPERMEG 256 -#define HVPAGESPERCHUNK 64 - -#define HvLpIndexInvalid ((HvLpIndex)0xff) - -/* - * Enums for the sub-components under PLIC - * Used in HvCall and HvPrimaryCall - */ -enum { - HvCallCompId = 0, - HvCallCpuCtlsCompId = 1, - HvCallCfgCompId = 2, - HvCallEventCompId = 3, - HvCallHptCompId = 4, - HvCallPciCompId = 5, - HvCallSlmCompId = 6, - HvCallSmCompId = 7, - HvCallSpdCompId = 8, - HvCallXmCompId = 9, - HvCallRioCompId = 10, - HvCallRsvd3CompId = 11, - HvCallRsvd2CompId = 12, - HvCallRsvd1CompId = 13, - HvCallMaxCompId = 14, - HvPrimaryCallCompId = 0, - HvPrimaryCallCfgCompId = 1, - HvPrimaryCallPciCompId = 2, - HvPrimaryCallSmCompId = 3, - HvPrimaryCallSpdCompId = 4, - HvPrimaryCallXmCompId = 5, - HvPrimaryCallRioCompId = 6, - HvPrimaryCallRsvd7CompId = 7, - HvPrimaryCallRsvd6CompId = 8, - HvPrimaryCallRsvd5CompId = 9, - HvPrimaryCallRsvd4CompId = 10, - HvPrimaryCallRsvd3CompId = 11, - HvPrimaryCallRsvd2CompId = 12, - HvPrimaryCallRsvd1CompId = 13, - HvPrimaryCallMaxCompId = HvCallMaxCompId -}; - -struct HvLpBufferList { - u64 addr; - u64 len; -}; - -#endif /* _ASM_POWERPC_ISERIES_HV_TYPES_H */ diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h deleted file mode 100644 index 1b9692c6089..00000000000 --- a/arch/powerpc/include/asm/iseries/iommu.h +++ /dev/null @@ -1,37 +0,0 @@ -#ifndef _ASM_POWERPC_ISERIES_IOMMU_H -#define _ASM_POWERPC_ISERIES_IOMMU_H - -/* - * Copyright (C) 2005 Stephen Rothwell, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - */ - -struct pci_dev; -struct vio_dev; -struct device_node; -struct iommu_table; - -/* Get table parameters from HV */ -extern void iommu_table_getparms_iSeries(unsigned long busno, - unsigned char slotno, unsigned char virtbus, - struct iommu_table *tbl); - -extern struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev); -extern void iommu_vio_init(void); - -#endif /* _ASM_POWERPC_ISERIES_IOMMU_H */ diff --git a/arch/powerpc/include/asm/iseries/it_lp_queue.h b/arch/powerpc/include/asm/iseries/it_lp_queue.h deleted file mode 100644 index 42827883882..00000000000 --- a/arch/powerpc/include/asm/iseries/it_lp_queue.h +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H -#define _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H - -/* - * This control block defines the simple LP queue structure that is - * shared between the hypervisor (PLIC) and the OS in order to send - * events to an LP. - */ - -#include <asm/types.h> -#include <asm/ptrace.h> - -#define IT_LP_MAX_QUEUES 8 - -#define IT_LP_NOT_USED 0 /* Queue will not be used by PLIC */ -#define IT_LP_DEDICATED_IO 1 /* Queue dedicated to IO processor specified */ -#define IT_LP_DEDICATED_LP 2 /* Queue dedicated to LP specified */ -#define IT_LP_SHARED 3 /* Queue shared for both IO and LP */ - -#define IT_LP_EVENT_STACK_SIZE 4096 -#define IT_LP_EVENT_MAX_SIZE 256 -#define IT_LP_EVENT_ALIGN 64 - -struct hvlpevent_queue { -/* - * The hq_current_event is the pointer to the next event stack entry - * that will become valid. The OS must peek at this entry to determine - * if it is valid. PLIC will set the valid indicator as the very last - * store into that entry. - * - * When the OS has completed processing of the event then it will mark - * the event as invalid so that PLIC knows it can store into that event - * location again. - * - * If the event stack fills and there are overflow events, then PLIC - * will set the hq_overflow_pending flag in which case the OS will - * have to fetch the additional LP events once they have drained the - * event stack. - * - * The first 16-bytes are known by both the OS and PLIC. The remainder - * of the cache line is for use by the OS. - */ - u8 hq_overflow_pending; /* 0x00 Overflow events are pending */ - u8 hq_status; /* 0x01 DedicatedIo or DedicatedLp or NotUsed */ - u16 hq_proc_index; /* 0x02 Logical Proc Index for correlation */ - u8 hq_reserved1[12]; /* 0x04 */ - char *hq_current_event; /* 0x10 */ - char *hq_last_event; /* 0x18 */ - char *hq_event_stack; /* 0x20 */ - u8 hq_index; /* 0x28 unique sequential index. */ - u8 hq_reserved2[3]; /* 0x29-2b */ - spinlock_t hq_lock; -}; - -extern struct hvlpevent_queue hvlpevent_queue; - -extern int hvlpevent_is_pending(void); -extern void process_hvlpevents(void); -extern void setup_hvlpevent_queue(void); - -#endif /* _ASM_POWERPC_ISERIES_IT_LP_QUEUE_H */ diff --git a/arch/powerpc/include/asm/iseries/lpar_map.h b/arch/powerpc/include/asm/iseries/lpar_map.h deleted file mode 100644 index 5e9f3e128ee..00000000000 --- a/arch/powerpc/include/asm/iseries/lpar_map.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_LPAR_MAP_H -#define _ASM_POWERPC_ISERIES_LPAR_MAP_H - -#ifndef __ASSEMBLY__ - -#include <asm/types.h> - -#endif - -/* - * The iSeries hypervisor will set up mapping for one or more - * ESID/VSID pairs (in SLB/segment registers) and will set up - * mappings of one or more ranges of pages to VAs. - * We will have the hypervisor set up the ESID->VSID mapping - * for the four kernel segments (C-F). With shared processors, - * the hypervisor will clear all segment registers and reload - * these four whenever the processor is switched from one - * partition to another. - */ - -/* The Vsid and Esid identified below will be used by the hypervisor - * to set up a memory mapping for part of the load area before giving - * control to the Linux kernel. The load area is 64 MB, but this must - * not attempt to map the whole load area. The Hashed Page Table may - * need to be located within the load area (if the total partition size - * is 64 MB), but cannot be mapped. Typically, this should specify - * to map half (32 MB) of the load area. - * - * The hypervisor will set up page table entries for the number of - * pages specified. - * - * In 32-bit mode, the hypervisor will load all four of the - * segment registers (identified by the low-order four bits of the - * Esid field. In 64-bit mode, the hypervisor will load one SLB - * entry to map the Esid to the Vsid. -*/ - -#define HvEsidsToMap 2 -#define HvRangesToMap 1 - -/* Hypervisor initially maps 32MB of the load area */ -#define HvPagesToMap 8192 - -#ifndef __ASSEMBLY__ -struct LparMap { - u64 xNumberEsids; // Number of ESID/VSID pairs - u64 xNumberRanges; // Number of VA ranges to map - u64 xSegmentTableOffs; // Page number within load area of seg table - u64 xRsvd[5]; - struct { - u64 xKernelEsid; // Esid used to map kernel load - u64 xKernelVsid; // Vsid used to map kernel load - } xEsids[HvEsidsToMap]; - struct { - u64 xPages; // Number of pages to be mapped - u64 xOffset; // Offset from start of load area - u64 xVPN; // Virtual Page Number - } xRanges[HvRangesToMap]; -}; - -extern const struct LparMap xLparMap; - -#endif /* __ASSEMBLY__ */ - -/* the fixed address where the LparMap exists */ -#define LPARMAP_PHYS 0x7000 - -#endif /* _ASM_POWERPC_ISERIES_LPAR_MAP_H */ diff --git a/arch/powerpc/include/asm/iseries/mf.h b/arch/powerpc/include/asm/iseries/mf.h deleted file mode 100644 index eb851a9c9e5..00000000000 --- a/arch/powerpc/include/asm/iseries/mf.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004 Stephen Rothwell IBM Corporation - * - * This modules exists as an interface between a Linux secondary partition - * running on an iSeries and the primary partition's Virtual Service - * Processor (VSP) object. The VSP has final authority over powering on/off - * all partitions in the iSeries. It also provides miscellaneous low-level - * machine facility type operations. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ASM_POWERPC_ISERIES_MF_H -#define _ASM_POWERPC_ISERIES_MF_H - -#include <linux/types.h> - -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_call_event.h> - -struct rtc_time; - -typedef void (*MFCompleteHandler)(void *clientToken, int returnCode); - -extern void mf_allocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned size, unsigned amount, MFCompleteHandler hdlr, - void *userToken); -extern void mf_deallocate_lp_events(HvLpIndex targetLp, HvLpEvent_Type type, - unsigned count, MFCompleteHandler hdlr, void *userToken); - -extern void mf_power_off(void); -extern void mf_reboot(char *cmd); - -extern void mf_display_src(u32 word); -extern void mf_display_progress(u16 value); - -extern void mf_init(void); - -#endif /* _ASM_POWERPC_ISERIES_MF_H */ diff --git a/arch/powerpc/include/asm/iseries/vio.h b/arch/powerpc/include/asm/iseries/vio.h deleted file mode 100644 index f9ac0d00b95..00000000000 --- a/arch/powerpc/include/asm/iseries/vio.h +++ /dev/null @@ -1,265 +0,0 @@ -/* -*- linux-c -*- - * - * iSeries Virtual I/O Message Path header - * - * Authors: Dave Boutcher <boutcher@us.ibm.com> - * Ryan Arnold <ryanarn@us.ibm.com> - * Colin Devilbiss <devilbis@us.ibm.com> - * - * (C) Copyright 2000 IBM Corporation - * - * This header file is used by the iSeries virtual I/O device - * drivers. It defines the interfaces to the common functions - * (implemented in drivers/char/viopath.h) as well as defining - * common functions and structures. Currently (at the time I - * wrote this comment) the iSeries virtual I/O device drivers - * that use this are - * drivers/block/viodasd.c - * drivers/char/viocons.c - * drivers/char/viotape.c - * drivers/cdrom/viocd.c - * - * The iSeries virtual ethernet support (veth.c) uses a whole - * different set of functions. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) anyu later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#ifndef _ASM_POWERPC_ISERIES_VIO_H -#define _ASM_POWERPC_ISERIES_VIO_H - -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_event.h> - -/* - * iSeries virtual I/O events use the subtype field in - * HvLpEvent to figure out what kind of vio event is coming - * in. We use a table to route these, and this defines - * the maximum number of distinct subtypes - */ -#define VIO_MAX_SUBTYPES 8 - -#define VIOMAXBLOCKDMA 12 - -struct open_data { - u64 disk_size; - u16 max_disk; - u16 cylinders; - u16 tracks; - u16 sectors; - u16 bytes_per_sector; -}; - -struct rw_data { - u64 offset; - struct { - u32 token; - u32 reserved; - u64 len; - } dma_info[VIOMAXBLOCKDMA]; -}; - -struct vioblocklpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - union { - struct open_data open_data; - struct rw_data rw_data; - u64 changed; - } u; -}; - -#define vioblockflags_ro 0x0001 - -enum vioblocksubtype { - vioblockopen = 0x0001, - vioblockclose = 0x0002, - vioblockread = 0x0003, - vioblockwrite = 0x0004, - vioblockflush = 0x0005, - vioblockcheck = 0x0007 -}; - -struct viocdlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_result; - u16 disk; - u16 flags; - u32 token; - u64 offset; /* On open, max number of disks */ - u64 len; /* On open, size of the disk */ - u32 block_size; /* Only set on open */ - u32 media_size; /* Only set on open */ -}; - -enum viocdsubtype { - viocdopen = 0x0001, - viocdclose = 0x0002, - viocdread = 0x0003, - viocdwrite = 0x0004, - viocdlockdoor = 0x0005, - viocdgetinfo = 0x0006, - viocdcheck = 0x0007 -}; - -struct viotapelpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 sub_type_result; - u16 tape; - u16 flags; - u32 token; - u64 len; - union { - struct { - u32 tape_op; - u32 count; - } op; - struct { - u32 type; - u32 resid; - u32 dsreg; - u32 gstat; - u32 erreg; - u32 file_no; - u32 block_no; - } get_status; - struct { - u32 block_no; - } get_pos; - } u; -}; - -enum viotapesubtype { - viotapeopen = 0x0001, - viotapeclose = 0x0002, - viotaperead = 0x0003, - viotapewrite = 0x0004, - viotapegetinfo = 0x0005, - viotapeop = 0x0006, - viotapegetpos = 0x0007, - viotapesetpos = 0x0008, - viotapegetstatus = 0x0009 -}; - -/* - * Each subtype can register a handler to process their events. - * The handler must have this interface. - */ -typedef void (vio_event_handler_t) (struct HvLpEvent * event); - -extern int viopath_open(HvLpIndex remoteLp, int subtype, int numReq); -extern int viopath_close(HvLpIndex remoteLp, int subtype, int numReq); -extern int vio_setHandler(int subtype, vio_event_handler_t * beh); -extern int vio_clearHandler(int subtype); -extern int viopath_isactive(HvLpIndex lp); -extern HvLpInstanceId viopath_sourceinst(HvLpIndex lp); -extern HvLpInstanceId viopath_targetinst(HvLpIndex lp); -extern void vio_set_hostlp(void); -extern void *vio_get_event_buffer(int subtype); -extern void vio_free_event_buffer(int subtype, void *buffer); - -extern struct vio_dev *vio_create_viodasd(u32 unit); - -extern HvLpIndex viopath_hostLp; -extern HvLpIndex viopath_ourLp; - -#define VIOCHAR_MAX_DATA 200 - -#define VIOMAJOR_SUBTYPE_MASK 0xff00 -#define VIOMINOR_SUBTYPE_MASK 0x00ff -#define VIOMAJOR_SUBTYPE_SHIFT 8 - -#define VIOVERSION 0x0101 - -/* - * This is the general structure for VIO errors; each module should have - * a table of them, and each table should be terminated by an entry of - * { 0, 0, NULL }. Then, to find a specific error message, a module - * should pass its local table and the return code. - */ -struct vio_error_entry { - u16 rc; - int errno; - const char *msg; -}; -extern const struct vio_error_entry *vio_lookup_rc( - const struct vio_error_entry *local_table, u16 rc); - -enum viosubtypes { - viomajorsubtype_monitor = 0x0100, - viomajorsubtype_blockio = 0x0200, - viomajorsubtype_chario = 0x0300, - viomajorsubtype_config = 0x0400, - viomajorsubtype_cdio = 0x0500, - viomajorsubtype_tape = 0x0600, - viomajorsubtype_scsi = 0x0700 -}; - -enum vioconfigsubtype { - vioconfigget = 0x0001, -}; - -enum viorc { - viorc_good = 0x0000, - viorc_noConnection = 0x0001, - viorc_noReceiver = 0x0002, - viorc_noBufferAvailable = 0x0003, - viorc_invalidMessageType = 0x0004, - viorc_invalidRange = 0x0201, - viorc_invalidToken = 0x0202, - viorc_DMAError = 0x0203, - viorc_useError = 0x0204, - viorc_releaseError = 0x0205, - viorc_invalidDisk = 0x0206, - viorc_openRejected = 0x0301 -}; - -/* - * The structure of the events that flow between us and OS/400 for chario - * events. You can't mess with this unless the OS/400 side changes too. - */ -struct viocharlpevent { - struct HvLpEvent event; - u32 reserved; - u16 version; - u16 subtype_result_code; - u8 virtual_device; - u8 len; - u8 data[VIOCHAR_MAX_DATA]; -}; - -#define VIOCHAR_WINDOW 10 - -enum viocharsubtype { - viocharopen = 0x0001, - viocharclose = 0x0002, - viochardata = 0x0003, - viocharack = 0x0004, - viocharconfig = 0x0005 -}; - -enum viochar_rc { - viochar_rc_ebusy = 1 -}; - -#endif /* _ASM_POWERPC_ISERIES_VIO_H */ diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h index e0298d26ce5..a76254af0aa 100644 --- a/arch/powerpc/include/asm/lppaca.h +++ b/arch/powerpc/include/asm/lppaca.h @@ -41,15 +41,7 @@ * We only have to have statically allocated lppaca structs on * legacy iSeries, which supports at most 64 cpus. */ -#ifdef CONFIG_PPC_ISERIES -#if NR_CPUS < 64 -#define NR_LPPACAS NR_CPUS -#else -#define NR_LPPACAS 64 -#endif -#else /* not iSeries */ #define NR_LPPACAS 1 -#endif /* The Hypervisor barfs if the lppaca crosses a page boundary. A 1k diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index a5b7c56237f..c65b9294376 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -273,7 +273,6 @@ struct mpic unsigned int isu_size; unsigned int isu_shift; unsigned int isu_mask; - unsigned int irq_count; /* Number of sources */ unsigned int num_sources; /* default senses array */ @@ -349,8 +348,6 @@ struct mpic #define MPIC_U3_HT_IRQS 0x00000004 /* Broken IPI registers (autodetected) */ #define MPIC_BROKEN_IPI 0x00000008 -/* MPIC wants a reset */ -#define MPIC_WANTS_RESET 0x00000010 /* Spurious vector requires EOI */ #define MPIC_SPV_EOI 0x00000020 /* No passthrough disable */ @@ -363,15 +360,11 @@ struct mpic #define MPIC_ENABLE_MCK 0x00000200 /* Disable bias among target selection, spread interrupts evenly */ #define MPIC_NO_BIAS 0x00000400 -/* Ignore NIRQS as reported by FRR */ -#define MPIC_BROKEN_FRR_NIRQS 0x00000800 /* Destination only supports a single CPU at a time */ #define MPIC_SINGLE_DEST_CPU 0x00001000 /* Enable CoreInt delivery of interrupts */ #define MPIC_ENABLE_COREINT 0x00002000 -/* Disable resetting of the MPIC. - * NOTE: This flag trumps MPIC_WANTS_RESET. - */ +/* Do not reset the MPIC during initialization */ #define MPIC_NO_RESET 0x00004000 /* Freescale MPIC (compatible includes "fsl,mpic") */ #define MPIC_FSL 0x00008000 diff --git a/arch/powerpc/include/asm/mpic_msgr.h b/arch/powerpc/include/asm/mpic_msgr.h new file mode 100644 index 00000000000..3ec37dc9003 --- /dev/null +++ b/arch/powerpc/include/asm/mpic_msgr.h @@ -0,0 +1,132 @@ +/* + * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the + * License. + * + */ + +#ifndef _ASM_MPIC_MSGR_H +#define _ASM_MPIC_MSGR_H + +#include <linux/types.h> +#include <linux/spinlock.h> + +struct mpic_msgr { + u32 __iomem *base; + u32 __iomem *mer; + int irq; + unsigned char in_use; + raw_spinlock_t lock; + int num; +}; + +/* Get a message register + * + * @reg_num: the MPIC message register to get + * + * A pointer to the message register is returned. If + * the message register asked for is already in use, then + * EBUSY is returned. If the number given is not associated + * with an actual message register, then ENODEV is returned. + * Successfully getting the register marks it as in use. + */ +extern struct mpic_msgr *mpic_msgr_get(unsigned int reg_num); + +/* Relinquish a message register + * + * @msgr: the message register to return + * + * Disables the given message register and marks it as free. + * After this call has completed successully the message + * register is available to be acquired by a call to + * mpic_msgr_get. + */ +extern void mpic_msgr_put(struct mpic_msgr *msgr); + +/* Enable a message register + * + * @msgr: the message register to enable + * + * The given message register is enabled for sending + * messages. + */ +extern void mpic_msgr_enable(struct mpic_msgr *msgr); + +/* Disable a message register + * + * @msgr: the message register to disable + * + * The given message register is disabled for sending + * messages. + */ +extern void mpic_msgr_disable(struct mpic_msgr *msgr); + +/* Write a message to a message register + * + * @msgr: the message register to write to + * @message: the message to write + * + * The given 32-bit message is written to the given message + * register. Writing to an enabled message registers fires + * an interrupt. + */ +static inline void mpic_msgr_write(struct mpic_msgr *msgr, u32 message) +{ + out_be32(msgr->base, message); +} + +/* Read a message from a message register + * + * @msgr: the message register to read from + * + * Returns the 32-bit value currently in the given message register. + * Upon reading the register any interrupts for that register are + * cleared. + */ +static inline u32 mpic_msgr_read(struct mpic_msgr *msgr) +{ + return in_be32(msgr->base); +} + +/* Clear a message register + * + * @msgr: the message register to clear + * + * Clears any interrupts associated with the given message register. + */ +static inline void mpic_msgr_clear(struct mpic_msgr *msgr) +{ + (void) mpic_msgr_read(msgr); +} + +/* Set the destination CPU for the message register + * + * @msgr: the message register whose destination is to be set + * @cpu_num: the Linux CPU number to bind the message register to + * + * Note that the CPU number given is the CPU number used by the kernel + * and *not* the actual hardware CPU number. + */ +static inline void mpic_msgr_set_destination(struct mpic_msgr *msgr, + u32 cpu_num) +{ + out_be32(msgr->base, 1 << get_hard_smp_processor_id(cpu_num)); +} + +/* Get the IRQ number for the message register + * @msgr: the message register whose IRQ is to be returned + * + * Returns the IRQ number associated with the given message register. + * NO_IRQ is returned if this message register is not capable of + * receiving interrupts. What message register can and cannot receive + * interrupts is specified in the device tree for the system. + */ +static inline int mpic_msgr_get_irq(struct mpic_msgr *msgr) +{ + return msgr->irq; +} + +#endif diff --git a/arch/powerpc/include/asm/paca.h b/arch/powerpc/include/asm/paca.h index 269c05a36d9..daf813fea91 100644 --- a/arch/powerpc/include/asm/paca.h +++ b/arch/powerpc/include/asm/paca.h @@ -132,7 +132,7 @@ struct paca_struct { u64 saved_msr; /* MSR saved here by enter_rtas */ u16 trap_save; /* Used when bad stack is encountered */ u8 soft_enabled; /* irq soft-enable flag */ - u8 hard_enabled; /* set if irqs are enabled in MSR */ + u8 irq_happened; /* irq happened while soft-disabled */ u8 io_sync; /* writel() needs spin_unlock sync */ u8 irq_work_pending; /* IRQ_WORK interrupt while soft-disable */ u8 nap_state_lost; /* NV GPR values lost in power7_idle */ diff --git a/arch/powerpc/include/asm/phyp_dump.h b/arch/powerpc/include/asm/phyp_dump.h deleted file mode 100644 index fa74c6c3e10..00000000000 --- a/arch/powerpc/include/asm/phyp_dump.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * Hypervisor-assisted dump - * - * Linas Vepstas, Manish Ahuja 2008 - * Copyright 2008 IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _PPC64_PHYP_DUMP_H -#define _PPC64_PHYP_DUMP_H - -#ifdef CONFIG_PHYP_DUMP - -/* The RMR region will be saved for later dumping - * whenever the kernel crashes. Set this to 256MB. */ -#define PHYP_DUMP_RMR_START 0x0 -#define PHYP_DUMP_RMR_END (1UL<<28) - -struct phyp_dump { - /* Memory that is reserved during very early boot. */ - unsigned long init_reserve_start; - unsigned long init_reserve_size; - /* cmd line options during boot */ - unsigned long reserve_bootvar; - unsigned long phyp_dump_at_boot; - /* Check status during boot if dump supported, active & present*/ - unsigned long phyp_dump_configured; - unsigned long phyp_dump_is_active; - /* store cpu & hpte size */ - unsigned long cpu_state_size; - unsigned long hpte_region_size; - /* previous scratch area values */ - unsigned long reserved_scratch_addr; - unsigned long reserved_scratch_size; -}; - -extern struct phyp_dump *phyp_dump_info; - -int early_init_dt_scan_phyp_dump(unsigned long node, - const char *uname, int depth, void *data); - -#endif /* CONFIG_PHYP_DUMP */ -#endif /* _PPC64_PHYP_DUMP_H */ diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 6d422979eba..e660b37aa7d 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -47,92 +47,21 @@ extern int rtas_setup_phb(struct pci_controller *phb); extern unsigned long pci_probe_only; -/* ---- EEH internal-use-only related routines ---- */ #ifdef CONFIG_EEH +void pci_addr_cache_build(void); void pci_addr_cache_insert_device(struct pci_dev *dev); void pci_addr_cache_remove_device(struct pci_dev *dev); -void pci_addr_cache_build(void); -struct pci_dev *pci_get_device_by_addr(unsigned long addr); - -/** - * eeh_slot_error_detail -- record and EEH error condition to the log - * @pdn: pci device node - * @severity: EEH_LOG_TEMP_FAILURE or EEH_LOG_PERM_FAILURE - * - * Obtains the EEH error details from the RTAS subsystem, - * and then logs these details with the RTAS error log system. - */ -#define EEH_LOG_TEMP_FAILURE 1 -#define EEH_LOG_PERM_FAILURE 2 -void eeh_slot_error_detail (struct pci_dn *pdn, int severity); - -/** - * rtas_pci_enable - enable IO transfers for this slot - * @pdn: pci device node - * @function: either EEH_THAW_MMIO or EEH_THAW_DMA - * - * Enable I/O transfers to this slot - */ -#define EEH_THAW_MMIO 2 -#define EEH_THAW_DMA 3 -int rtas_pci_enable(struct pci_dn *pdn, int function); - -/** - * rtas_set_slot_reset -- unfreeze a frozen slot - * @pdn: pci device node - * - * Clear the EEH-frozen condition on a slot. This routine - * does this by asserting the PCI #RST line for 1/8th of - * a second; this routine will sleep while the adapter is - * being reset. - * - * Returns a non-zero value if the reset failed. - */ -int rtas_set_slot_reset (struct pci_dn *); -int eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs); - -/** - * eeh_restore_bars - Restore device configuration info. - * @pdn: pci device node - * - * A reset of a PCI device will clear out its config space. - * This routines will restore the config space for this - * device, and is children, to values previously obtained - * from the firmware. - */ -void eeh_restore_bars(struct pci_dn *); - -/** - * rtas_configure_bridge -- firmware initialization of pci bridge - * @pdn: pci device node - * - * Ask the firmware to configure all PCI bridges devices - * located behind the indicated node. Required after a - * pci device reset. Does essentially the same hing as - * eeh_restore_bars, but for brdges, and lets firmware - * do the work. - */ -void rtas_configure_bridge(struct pci_dn *); - +struct pci_dev *pci_addr_cache_get_device(unsigned long addr); +void eeh_slot_error_detail(struct eeh_dev *edev, int severity); +int eeh_pci_enable(struct eeh_dev *edev, int function); +int eeh_reset_pe(struct eeh_dev *); +void eeh_restore_bars(struct eeh_dev *); int rtas_write_config(struct pci_dn *, int where, int size, u32 val); int rtas_read_config(struct pci_dn *, int where, int size, u32 *val); - -/** - * eeh_mark_slot -- set mode flags for pertition endpoint - * @pdn: pci device node - * - * mark and clear slots: find "partition endpoint" PE and set or - * clear the flags for each subnode of the PE. - */ -void eeh_mark_slot (struct device_node *dn, int mode_flag); -void eeh_clear_slot (struct device_node *dn, int mode_flag); - -/** - * find_device_pe -- Find the associated "Partiationable Endpoint" PE - * @pdn: pci device node - */ -struct device_node * find_device_pe(struct device_node *dn); +void eeh_mark_slot(struct device_node *dn, int mode_flag); +void eeh_clear_slot(struct device_node *dn, int mode_flag); +struct device_node *eeh_find_device_pe(struct device_node *dn); void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev); diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h index 368f72f7980..50f73aa2ba2 100644 --- a/arch/powerpc/include/asm/ppc_asm.h +++ b/arch/powerpc/include/asm/ppc_asm.h @@ -60,6 +60,8 @@ BEGIN_FW_FTR_SECTION; \ cmpd cr1,r11,r10; \ beq+ cr1,33f; \ bl .accumulate_stolen_time; \ + ld r12,_MSR(r1); \ + andi. r10,r12,MSR_PR; /* Restore cr0 (coming from user) */ \ 33: \ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h index 7fdc2c0b7fa..b1a215eabef 100644 --- a/arch/powerpc/include/asm/reg.h +++ b/arch/powerpc/include/asm/reg.h @@ -1079,30 +1079,12 @@ #define proc_trap() asm volatile("trap") -#ifdef CONFIG_PPC64 - -extern void ppc64_runlatch_on(void); -extern void __ppc64_runlatch_off(void); - -#define ppc64_runlatch_off() \ - do { \ - if (cpu_has_feature(CPU_FTR_CTRL) && \ - test_thread_flag(TIF_RUNLATCH)) \ - __ppc64_runlatch_off(); \ - } while (0) +#define __get_SP() ({unsigned long sp; \ + asm volatile("mr %0,1": "=r" (sp)); sp;}) extern unsigned long scom970_read(unsigned int address); extern void scom970_write(unsigned int address, unsigned long value); -#else -#define ppc64_runlatch_on() -#define ppc64_runlatch_off() - -#endif /* CONFIG_PPC64 */ - -#define __get_SP() ({unsigned long sp; \ - asm volatile("mr %0,1": "=r" (sp)); sp;}) - struct pt_regs; extern void ppc_save_regs(struct pt_regs *regs); diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 500fe1dc43e..8a97aa7289d 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -62,6 +62,7 @@ #define SPRN_DVC2 0x13F /* Data Value Compare Register 2 */ #define SPRN_MAS8 0x155 /* MMU Assist Register 8 */ #define SPRN_TLB0PS 0x158 /* TLB 0 Page Size Register */ +#define SPRN_TLB1PS 0x159 /* TLB 1 Page Size Register */ #define SPRN_MAS5_MAS6 0x15c /* MMU Assist Register 5 || 6 */ #define SPRN_MAS8_MAS1 0x15d /* MMU Assist Register 8 || 1 */ #define SPRN_EPTCFG 0x15e /* Embedded Page Table Config */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h index f9611bd69ed..7124fc06ad4 100644 --- a/arch/powerpc/include/asm/spinlock.h +++ b/arch/powerpc/include/asm/spinlock.h @@ -23,7 +23,6 @@ #ifdef CONFIG_PPC64 #include <asm/paca.h> #include <asm/hvcall.h> -#include <asm/iseries/hv_call.h> #endif #include <asm/asm-compat.h> #include <asm/synch.h> @@ -95,12 +94,12 @@ static inline int arch_spin_trylock(arch_spinlock_t *lock) * value. */ -#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) +#if defined(CONFIG_PPC_SPLPAR) /* We only yield to the hypervisor if we are in shared processor mode */ #define SHARED_PROCESSOR (get_lppaca()->shared_proc) extern void __spin_yield(arch_spinlock_t *lock); extern void __rw_yield(arch_rwlock_t *lock); -#else /* SPLPAR || ISERIES */ +#else /* SPLPAR */ #define __spin_yield(x) barrier() #define __rw_yield(x) barrier() #define SHARED_PROCESSOR 0 diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index c377457d1b8..a02883d5af4 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -550,5 +550,43 @@ extern void reloc_got2(unsigned long); extern struct dentry *powerpc_debugfs_root; +#ifdef CONFIG_PPC64 + +extern void __ppc64_runlatch_on(void); +extern void __ppc64_runlatch_off(void); + +/* + * We manually hard enable-disable, this is called + * in the idle loop and we don't want to mess up + * with soft-disable/enable & interrupt replay. + */ +#define ppc64_runlatch_off() \ + do { \ + if (cpu_has_feature(CPU_FTR_CTRL) && \ + test_thread_local_flags(_TLF_RUNLATCH)) { \ + unsigned long msr = mfmsr(); \ + __hard_irq_disable(); \ + __ppc64_runlatch_off(); \ + if (msr & MSR_EE) \ + __hard_irq_enable(); \ + } \ + } while (0) + +#define ppc64_runlatch_on() \ + do { \ + if (cpu_has_feature(CPU_FTR_CTRL) && \ + !test_thread_local_flags(_TLF_RUNLATCH)) { \ + unsigned long msr = mfmsr(); \ + __hard_irq_disable(); \ + __ppc64_runlatch_on(); \ + if (msr & MSR_EE) \ + __hard_irq_enable(); \ + } \ + } while (0) +#else +#define ppc64_runlatch_on() +#define ppc64_runlatch_off() +#endif /* CONFIG_PPC64 */ + #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SYSTEM_H */ diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 96471494096..4a741c7efd0 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -110,7 +110,6 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOERROR 12 /* Force successful syscall return */ #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ #define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ -#define TIF_RUNLATCH 16 /* Is the runlatch enabled? */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -141,11 +140,13 @@ static inline struct thread_info *current_thread_info(void) #define TLF_SLEEPING 1 /* suspend code enabled SLEEP mode */ #define TLF_RESTORE_SIGMASK 2 /* Restore signal mask in do_signal */ #define TLF_LAZY_MMU 3 /* tlb_batch is active */ +#define TLF_RUNLATCH 4 /* Is the runlatch enabled? */ #define _TLF_NAPPING (1 << TLF_NAPPING) #define _TLF_SLEEPING (1 << TLF_SLEEPING) #define _TLF_RESTORE_SIGMASK (1 << TLF_RESTORE_SIGMASK) #define _TLF_LAZY_MMU (1 << TLF_LAZY_MMU) +#define _TLF_RUNLATCH (1 << TLF_RUNLATCH) #ifndef __ASSEMBLY__ #define HAVE_SET_RESTORE_SIGMASK 1 @@ -156,6 +157,12 @@ static inline void set_restore_sigmask(void) set_bit(TIF_SIGPENDING, &ti->flags); } +static inline bool test_thread_local_flags(unsigned int flags) +{ + struct thread_info *ti = current_thread_info(); + return (ti->local_flags & flags) != 0; +} + #ifdef CONFIG_PPC64 #define is_32bit_task() (test_thread_flag(TIF_32BIT)) #else diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h index 7eb10fb96cd..2136f58a54e 100644 --- a/arch/powerpc/include/asm/time.h +++ b/arch/powerpc/include/asm/time.h @@ -18,11 +18,6 @@ #include <linux/percpu.h> #include <asm/processor.h> -#ifdef CONFIG_PPC_ISERIES -#include <asm/paca.h> -#include <asm/firmware.h> -#include <asm/iseries/hv_call.h> -#endif /* time.c */ extern unsigned long tb_ticks_per_jiffy; @@ -167,15 +162,6 @@ static inline void set_dec(int val) #ifndef CONFIG_BOOKE --val; #endif -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES) && - get_lppaca()->shared_proc) { - get_lppaca()->virtual_decr = val; - if (get_dec() > val) - HvCall_setVirtualDecr(); - return; - } -#endif mtspr(SPRN_DEC, val); #endif /* not 40x or 8xx_CPU6 */ } @@ -217,7 +203,6 @@ DECLARE_PER_CPU(struct cpu_usage, cpu_usage_array); #endif extern void secondary_cpu_time_init(void); -extern void iSeries_time_init_early(void); DECLARE_PER_CPU(u64, decrementers_next_tb); diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index ee728e433aa..f5808a35688 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -60,6 +60,7 @@ obj-$(CONFIG_IBMVIO) += vio.o obj-$(CONFIG_IBMEBUS) += ibmebus.o obj-$(CONFIG_GENERIC_TBSYNC) += smp-tbsync.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o +obj-$(CONFIG_FA_DUMP) += fadump.o ifeq ($(CONFIG_PPC32),y) obj-$(CONFIG_E500) += idle_e500.o endif @@ -113,15 +114,6 @@ obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o -obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o - -obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o -obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ - power5+-pmu.o power6-pmu.o power7-pmu.o -obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o - -obj-$(CONFIG_FSL_EMB_PERF_EVENT) += perf_event_fsl_emb.o -obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o obj-$(CONFIG_8XX_MINIMAL_FPEMU) += softemu8xx.o diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c index 04caee7d9bc..cc492e48ddf 100644 --- a/arch/powerpc/kernel/asm-offsets.c +++ b/arch/powerpc/kernel/asm-offsets.c @@ -46,9 +46,6 @@ #include <asm/hvcall.h> #include <asm/xics.h> #endif -#ifdef CONFIG_PPC_ISERIES -#include <asm/iseries/alpaca.h> -#endif #ifdef CONFIG_PPC_POWERNV #include <asm/opal.h> #endif @@ -147,7 +144,7 @@ int main(void) DEFINE(PACAKBASE, offsetof(struct paca_struct, kernelbase)); DEFINE(PACAKMSR, offsetof(struct paca_struct, kernel_msr)); DEFINE(PACASOFTIRQEN, offsetof(struct paca_struct, soft_enabled)); - DEFINE(PACAHARDIRQEN, offsetof(struct paca_struct, hard_enabled)); + DEFINE(PACAIRQHAPPENED, offsetof(struct paca_struct, irq_happened)); DEFINE(PACACONTEXTID, offsetof(struct paca_struct, context.id)); #ifdef CONFIG_PPC_MM_SLICES DEFINE(PACALOWSLICESPSIZE, offsetof(struct paca_struct, @@ -384,17 +381,6 @@ int main(void) DEFINE(BUG_ENTRY_SIZE, sizeof(struct bug_entry)); #endif -#ifdef CONFIG_PPC_ISERIES - /* the assembler miscalculates the VSID values */ - DEFINE(PAGE_OFFSET_ESID, GET_ESID(PAGE_OFFSET)); - DEFINE(PAGE_OFFSET_VSID, KERNEL_VSID(PAGE_OFFSET)); - DEFINE(VMALLOC_START_ESID, GET_ESID(VMALLOC_START)); - DEFINE(VMALLOC_START_VSID, KERNEL_VSID(VMALLOC_START)); - - /* alpaca */ - DEFINE(ALPACA_SIZE, sizeof(struct alpaca)); -#endif - DEFINE(PGD_TABLE_SIZE, PGD_TABLE_SIZE); DEFINE(PTE_SIZE, sizeof(pte_t)); diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 81db9e2a8a2..138ae183c44 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1816,7 +1816,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .platform = "ppc440", }, { /* 464 in APM821xx */ - .pvr_mask = 0xffffff00, + .pvr_mask = 0xfffffff0, .pvr_value = 0x12C41C80, .cpu_name = "APM821XX", .cpu_features = CPU_FTRS_44X, @@ -2019,6 +2019,24 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_e500mc, .platform = "ppce5500", }, + { /* e6500 */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x80400000, + .cpu_name = "e6500", + .cpu_features = CPU_FTRS_E6500, + .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, + .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS | + MMU_FTR_USE_TLBILX, + .icache_bsize = 64, + .dcache_bsize = 64, + .num_pmcs = 4, + .oprofile_cpu_type = "ppc/e6500", + .oprofile_type = PPC_OPROFILE_FSL_EMB, + .cpu_setup = __setup_cpu_e5500, + .cpu_restore = __restore_cpu_e5500, + .machine_check = machine_check_e500mc, + .platform = "ppce6500", + }, #ifdef CONFIG_PPC32 { /* default match */ .pvr_mask = 0x00000000, diff --git a/arch/powerpc/kernel/dbell.c b/arch/powerpc/kernel/dbell.c index 2cc451aaaca..5b25c8060fd 100644 --- a/arch/powerpc/kernel/dbell.c +++ b/arch/powerpc/kernel/dbell.c @@ -37,6 +37,8 @@ void doorbell_exception(struct pt_regs *regs) irq_enter(); + may_hard_irq_enable(); + smp_ipi_demux(); irq_exit(); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 866462cbe2d..f8a7a1a1a9f 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -32,6 +32,7 @@ #include <asm/ptrace.h> #include <asm/irqflags.h> #include <asm/ftrace.h> +#include <asm/hw_irq.h> /* * System calls. @@ -115,39 +116,33 @@ BEGIN_FW_FTR_SECTION END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR) #endif /* CONFIG_VIRT_CPU_ACCOUNTING && CONFIG_PPC_SPLPAR */ -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_on - REST_GPR(0,r1) - REST_4GPRS(3,r1) - REST_2GPRS(7,r1) - addi r9,r1,STACK_FRAME_OVERHEAD - ld r12,_MSR(r1) -#endif /* CONFIG_TRACE_IRQFLAGS */ - li r10,1 - stb r10,PACASOFTIRQEN(r13) - stb r10,PACAHARDIRQEN(r13) - std r10,SOFTE(r1) -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - /* Hack for handling interrupts when soft-enabling on iSeries */ - cmpdi cr1,r0,0x5555 /* syscall 0x5555 */ - andi. r10,r12,MSR_PR /* from kernel */ - crand 4*cr0+eq,4*cr1+eq,4*cr0+eq - bne 2f - b hardware_interrupt_entry -2: -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ + /* + * A syscall should always be called with interrupts enabled + * so we just unconditionally hard-enable here. When some kind + * of irq tracing is used, we additionally check that condition + * is correct + */ +#if defined(CONFIG_TRACE_IRQFLAGS) && defined(CONFIG_BUG) + lbz r10,PACASOFTIRQEN(r13) + xori r10,r10,1 +1: tdnei r10,0 + EMIT_BUG_ENTRY 1b,__FILE__,__LINE__,BUGFLAG_WARNING +#endif - /* Hard enable interrupts */ #ifdef CONFIG_PPC_BOOK3E wrteei 1 #else - mfmsr r11 + ld r11,PACAKMSR(r13) ori r11,r11,MSR_EE mtmsrd r11,1 #endif /* CONFIG_PPC_BOOK3E */ + /* We do need to set SOFTE in the stack frame or the return + * from interrupt will be painful + */ + li r10,1 + std r10,SOFTE(r1) + #ifdef SHOW_SYSCALLS bl .do_show_syscall REST_GPR(0,r1) @@ -198,16 +193,14 @@ syscall_exit: andi. r10,r8,MSR_RI beq- unrecov_restore #endif - - /* Disable interrupts so current_thread_info()->flags can't change, + /* + * Disable interrupts so current_thread_info()->flags can't change, * and so that we don't get interrupted after loading SRR0/1. */ #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 + ld r10,PACAKMSR(r13) mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ @@ -319,7 +312,7 @@ syscall_exit_work: #ifdef CONFIG_PPC_BOOK3E wrteei 1 #else - mfmsr r10 + ld r10,PACAKMSR(r13) ori r10,r10,MSR_EE mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ @@ -565,10 +558,8 @@ _GLOBAL(ret_from_except_lite) #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 /* Get current interrupt state */ - rldicl r9,r10,48,1 /* clear MSR_EE */ - rotldi r9,r9,16 - mtmsrd r9,1 /* Update machine state */ + ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ + mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ #ifdef CONFIG_PREEMPT @@ -591,25 +582,74 @@ _GLOBAL(ret_from_except_lite) ld r4,TI_FLAGS(r9) andi. r0,r4,_TIF_USER_WORK_MASK bne do_work -#endif +#endif /* !CONFIG_PREEMPT */ + .globl fast_exc_return_irq +fast_exc_return_irq: restore: -BEGIN_FW_FTR_SECTION + /* + * This is the main kernel exit path, we first check if we + * have to change our interrupt state. + */ ld r5,SOFTE(r1) -FW_FTR_SECTION_ELSE - b .Liseries_check_pending_irqs -ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) -2: - TRACE_AND_RESTORE_IRQ(r5); + lbz r6,PACASOFTIRQEN(r13) + cmpwi cr1,r5,0 + cmpw cr0,r5,r6 + beq cr0,4f + + /* We do, handle disable first, which is easy */ + bne cr1,3f; + li r0,0 + stb r0,PACASOFTIRQEN(r13); + TRACE_DISABLE_INTS + b 4f - /* extract EE bit and use it to restore paca->hard_enabled */ - ld r3,_MSR(r1) - rldicl r4,r3,49,63 /* r0 = (r3 >> 15) & 1 */ - stb r4,PACAHARDIRQEN(r13) +3: /* + * We are about to soft-enable interrupts (we are hard disabled + * at this point). We check if there's anything that needs to + * be replayed first. + */ + lbz r0,PACAIRQHAPPENED(r13) + cmpwi cr0,r0,0 + bne- restore_check_irq_replay + /* + * Get here when nothing happened while soft-disabled, just + * soft-enable and move-on. We will hard-enable as a side + * effect of rfi + */ +restore_no_replay: + TRACE_ENABLE_INTS + li r0,1 + stb r0,PACASOFTIRQEN(r13); + + /* + * Final return path. BookE is handled in a different file + */ +4: #ifdef CONFIG_PPC_BOOK3E b .exception_return_book3e #else + /* + * Clear the reservation. If we know the CPU tracks the address of + * the reservation then we can potentially save some cycles and use + * a larx. On POWER6 and POWER7 this is significantly faster. + */ +BEGIN_FTR_SECTION + stdcx. r0,0,r1 /* to clear the reservation */ +FTR_SECTION_ELSE + ldarx r4,0,r1 +ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) + + /* + * Some code path such as load_up_fpu or altivec return directly + * here. They run entirely hard disabled and do not alter the + * interrupt state. They also don't use lwarx/stwcx. and thus + * are known not to leave dangling reservations. + */ + .globl fast_exception_return +fast_exception_return: + ld r3,_MSR(r1) ld r4,_CTR(r1) ld r0,_LINK(r1) mtctr r4 @@ -623,28 +663,18 @@ ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES) beq- unrecov_restore /* - * Clear the reservation. If we know the CPU tracks the address of - * the reservation then we can potentially save some cycles and use - * a larx. On POWER6 and POWER7 this is significantly faster. - */ -BEGIN_FTR_SECTION - stdcx. r0,0,r1 /* to clear the reservation */ -FTR_SECTION_ELSE - ldarx r4,0,r1 -ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) - - /* * Clear RI before restoring r13. If we are returning to * userspace and we take an exception after restoring r13, * we end up corrupting the userspace r13 value. */ - mfmsr r4 - andc r4,r4,r0 /* r0 contains MSR_RI here */ + ld r4,PACAKMSR(r13) /* Get kernel MSR without EE */ + andc r4,r4,r0 /* r0 contains MSR_RI here */ mtmsrd r4,1 /* * r13 is our per cpu area, only restore it if we are returning to - * userspace + * userspace the value stored in the stack frame may belong to + * another CPU. */ andi. r0,r3,MSR_PR beq 1f @@ -669,30 +699,55 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS) #endif /* CONFIG_PPC_BOOK3E */ -.Liseries_check_pending_irqs: -#ifdef CONFIG_PPC_ISERIES - ld r5,SOFTE(r1) - cmpdi 0,r5,0 - beq 2b - /* Check for pending interrupts (iSeries) */ - ld r3,PACALPPACAPTR(r13) - ld r3,LPPACAANYINT(r3) - cmpdi r3,0 - beq+ 2b /* skip do_IRQ if no interrupts */ - - li r3,0 - stb r3,PACASOFTIRQEN(r13) /* ensure we are soft-disabled */ -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_off - mfmsr r10 -#endif - ori r10,r10,MSR_EE - mtmsrd r10 /* hard-enable again */ - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite /* loop back and handle more */ -#endif + /* + * Something did happen, check if a re-emit is needed + * (this also clears paca->irq_happened) + */ +restore_check_irq_replay: + /* XXX: We could implement a fast path here where we check + * for irq_happened being just 0x01, in which case we can + * clear it and return. That means that we would potentially + * miss a decrementer having wrapped all the way around. + * + * Still, this might be useful for things like hash_page + */ + bl .__check_irq_replay + cmpwi cr0,r3,0 + beq restore_no_replay + + /* + * We need to re-emit an interrupt. We do so by re-using our + * existing exception frame. We first change the trap value, + * but we need to ensure we preserve the low nibble of it + */ + ld r4,_TRAP(r1) + clrldi r4,r4,60 + or r4,r4,r3 + std r4,_TRAP(r1) + /* + * Then find the right handler and call it. Interrupts are + * still soft-disabled and we keep them that way. + */ + cmpwi cr0,r3,0x500 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .do_IRQ + b .ret_from_except +1: cmpwi cr0,r3,0x900 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .timer_interrupt + b .ret_from_except +#ifdef CONFIG_PPC_BOOK3E +1: cmpwi cr0,r3,0x280 + bne 1f + addi r3,r1,STACK_FRAME_OVERHEAD; + bl .doorbell_exception + b .ret_from_except +#endif /* CONFIG_PPC_BOOK3E */ +1: b .ret_from_except /* What else to do here ? */ + do_work: #ifdef CONFIG_PREEMPT andi. r0,r3,MSR_PR /* Returning to user mode? */ @@ -705,31 +760,22 @@ do_work: crandc eq,cr1*4+eq,eq bne restore - /* Here we are preempting the current task. - * - * Ensure interrupts are soft-disabled. We also properly mark - * the PACA to reflect the fact that they are hard-disabled - * and trace the change + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first */ - li r0,0 - stb r0,PACASOFTIRQEN(r13) - stb r0,PACAHARDIRQEN(r13) - TRACE_DISABLE_INTS - - /* Call the scheduler with soft IRQs off */ + SOFT_DISABLE_INTS(r3,r4) 1: bl .preempt_schedule_irq /* Hard-disable interrupts again (and update PACA) */ #ifdef CONFIG_PPC_BOOK3E wrteei 0 #else - mfmsr r10 - rldicl r10,r10,48,1 - rotldi r10,r10,16 + ld r10,PACAKMSR(r13) /* Get kernel MSR without EE */ mtmsrd r10,1 #endif /* CONFIG_PPC_BOOK3E */ - li r0,0 - stb r0,PACAHARDIRQEN(r13) + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT @@ -751,14 +797,12 @@ user_work: andi. r0,r4,_TIF_NEED_RESCHED beq 1f - li r5,1 - TRACE_AND_RESTORE_IRQ(r5); + bl .restore_interrupts bl .schedule b .ret_from_except_lite 1: bl .save_nvgprs - li r5,1 - TRACE_AND_RESTORE_IRQ(r5); + bl .restore_interrupts addi r3,r1,STACK_FRAME_OVERHEAD bl .do_notify_resume b .ret_from_except diff --git a/arch/powerpc/kernel/exceptions-64e.S b/arch/powerpc/kernel/exceptions-64e.S index 429983c06f9..7215cc2495d 100644 --- a/arch/powerpc/kernel/exceptions-64e.S +++ b/arch/powerpc/kernel/exceptions-64e.S @@ -24,6 +24,7 @@ #include <asm/ptrace.h> #include <asm/ppc-opcode.h> #include <asm/mmu.h> +#include <asm/hw_irq.h> /* XXX This will ultimately add space for a special exception save * structure used to save things like SRR0/SRR1, SPRGs, MAS, etc... @@ -77,59 +78,55 @@ #define SPRN_MC_SRR1 SPRN_MCSRR1 #define NORMAL_EXCEPTION_PROLOG(n, addition) \ - EXCEPTION_PROLOG(n, GEN, addition##_GEN) + EXCEPTION_PROLOG(n, GEN, addition##_GEN(n)) #define CRIT_EXCEPTION_PROLOG(n, addition) \ - EXCEPTION_PROLOG(n, CRIT, addition##_CRIT) + EXCEPTION_PROLOG(n, CRIT, addition##_CRIT(n)) #define DBG_EXCEPTION_PROLOG(n, addition) \ - EXCEPTION_PROLOG(n, DBG, addition##_DBG) + EXCEPTION_PROLOG(n, DBG, addition##_DBG(n)) #define MC_EXCEPTION_PROLOG(n, addition) \ - EXCEPTION_PROLOG(n, MC, addition##_MC) + EXCEPTION_PROLOG(n, MC, addition##_MC(n)) /* Variants of the "addition" argument for the prolog */ -#define PROLOG_ADDITION_NONE_GEN -#define PROLOG_ADDITION_NONE_CRIT -#define PROLOG_ADDITION_NONE_DBG -#define PROLOG_ADDITION_NONE_MC +#define PROLOG_ADDITION_NONE_GEN(n) +#define PROLOG_ADDITION_NONE_CRIT(n) +#define PROLOG_ADDITION_NONE_DBG(n) +#define PROLOG_ADDITION_NONE_MC(n) -#define PROLOG_ADDITION_MASKABLE_GEN \ +#define PROLOG_ADDITION_MASKABLE_GEN(n) \ lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ cmpwi cr0,r11,0; /* yes -> go out of line */ \ - beq masked_interrupt_book3e; + beq masked_interrupt_book3e_##n -#define PROLOG_ADDITION_2REGS_GEN \ +#define PROLOG_ADDITION_2REGS_GEN(n) \ std r14,PACA_EXGEN+EX_R14(r13); \ std r15,PACA_EXGEN+EX_R15(r13) -#define PROLOG_ADDITION_1REG_GEN \ +#define PROLOG_ADDITION_1REG_GEN(n) \ std r14,PACA_EXGEN+EX_R14(r13); -#define PROLOG_ADDITION_2REGS_CRIT \ +#define PROLOG_ADDITION_2REGS_CRIT(n) \ std r14,PACA_EXCRIT+EX_R14(r13); \ std r15,PACA_EXCRIT+EX_R15(r13) -#define PROLOG_ADDITION_2REGS_DBG \ +#define PROLOG_ADDITION_2REGS_DBG(n) \ std r14,PACA_EXDBG+EX_R14(r13); \ std r15,PACA_EXDBG+EX_R15(r13) -#define PROLOG_ADDITION_2REGS_MC \ +#define PROLOG_ADDITION_2REGS_MC(n) \ std r14,PACA_EXMC+EX_R14(r13); \ std r15,PACA_EXMC+EX_R15(r13) -#define PROLOG_ADDITION_DOORBELL_GEN \ - lbz r11,PACASOFTIRQEN(r13); /* are irqs soft-disabled ? */ \ - cmpwi cr0,r11,0; /* yes -> go out of line */ \ - beq masked_doorbell_book3e - /* Core exception code for all exceptions except TLB misses. * XXX: Needs to make SPRN_SPRG_GEN depend on exception type */ #define EXCEPTION_COMMON(n, excf, ints) \ +exc_##n##_common: \ std r0,GPR0(r1); /* save r0 in stackframe */ \ std r2,GPR2(r1); /* save r2 in stackframe */ \ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \ @@ -167,20 +164,21 @@ std r0,RESULT(r1); /* clear regs->result */ \ ints; -/* Variants for the "ints" argument */ +/* Variants for the "ints" argument. This one does nothing when we want + * to keep interrupts in their original state + */ #define INTS_KEEP -#define INTS_DISABLE_SOFT \ - stb r0,PACASOFTIRQEN(r13); /* mark interrupts soft-disabled */ \ - TRACE_DISABLE_INTS; -#define INTS_DISABLE_HARD \ - stb r0,PACAHARDIRQEN(r13); /* and hard disabled */ -#define INTS_DISABLE_ALL \ - INTS_DISABLE_SOFT \ - INTS_DISABLE_HARD - -/* This is called by exceptions that used INTS_KEEP (that is did not clear - * neither soft nor hard IRQ indicators in the PACA. This will restore MSR:EE - * to it's previous value + +/* This second version is meant for exceptions that don't immediately + * hard-enable. We set a bit in paca->irq_happened to ensure that + * a subsequent call to arch_local_irq_restore() will properly + * hard-enable and avoid the fast-path + */ +#define INTS_DISABLE SOFT_DISABLE_INTS(r3,r4) + +/* This is called by exceptions that used INTS_KEEP (that did not touch + * irq indicators in the PACA). This will restore MSR:EE to it's previous + * value * * XXX In the long run, we may want to open-code it in order to separate the * load from the wrtee, thus limiting the latency caused by the dependency @@ -238,7 +236,7 @@ exc_##n##_bad_stack: \ #define MASKABLE_EXCEPTION(trapnum, label, hdlr, ack) \ START_EXCEPTION(label); \ NORMAL_EXCEPTION_PROLOG(trapnum, PROLOG_ADDITION_MASKABLE) \ - EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE_ALL) \ + EXCEPTION_COMMON(trapnum, PACA_EXGEN, INTS_DISABLE) \ ack(r8); \ CHECK_NAPPING(); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ @@ -289,7 +287,7 @@ interrupt_end_book3e: /* Critical Input Interrupt */ START_EXCEPTION(critical_input); CRIT_EXCEPTION_PROLOG(0x100, PROLOG_ADDITION_NONE) -// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE_ALL) +// EXCEPTION_COMMON(0x100, PACA_EXCRIT, INTS_DISABLE) // bl special_reg_save_crit // CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD @@ -300,7 +298,7 @@ interrupt_end_book3e: /* Machine Check Interrupt */ START_EXCEPTION(machine_check); CRIT_EXCEPTION_PROLOG(0x200, PROLOG_ADDITION_NONE) -// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE_ALL) +// EXCEPTION_COMMON(0x200, PACA_EXMC, INTS_DISABLE) // bl special_reg_save_mc // addi r3,r1,STACK_FRAME_OVERHEAD // CHECK_NAPPING(); @@ -313,7 +311,7 @@ interrupt_end_book3e: NORMAL_EXCEPTION_PROLOG(0x300, PROLOG_ADDITION_2REGS) mfspr r14,SPRN_DEAR mfspr r15,SPRN_ESR - EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_KEEP) + EXCEPTION_COMMON(0x300, PACA_EXGEN, INTS_DISABLE) b storage_fault_common /* Instruction Storage Interrupt */ @@ -321,7 +319,7 @@ interrupt_end_book3e: NORMAL_EXCEPTION_PROLOG(0x400, PROLOG_ADDITION_2REGS) li r15,0 mr r14,r10 - EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_KEEP) + EXCEPTION_COMMON(0x400, PACA_EXGEN, INTS_DISABLE) b storage_fault_common /* External Input Interrupt */ @@ -339,12 +337,11 @@ interrupt_end_book3e: START_EXCEPTION(program); NORMAL_EXCEPTION_PROLOG(0x700, PROLOG_ADDITION_1REG) mfspr r14,SPRN_ESR - EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE_SOFT) + EXCEPTION_COMMON(0x700, PACA_EXGEN, INTS_DISABLE) std r14,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD ld r14,PACA_EXGEN+EX_R14(r13) bl .save_nvgprs - INTS_RESTORE_HARD bl .program_check_exception b .ret_from_except @@ -353,15 +350,16 @@ interrupt_end_book3e: NORMAL_EXCEPTION_PROLOG(0x800, PROLOG_ADDITION_NONE) /* we can probably do a shorter exception entry for that one... */ EXCEPTION_COMMON(0x800, PACA_EXGEN, INTS_KEEP) - bne 1f /* if from user, just load it up */ + ld r12,_MSR(r1) + andi. r0,r12,MSR_PR; + beq- 1f + bl .load_up_fpu + b fast_exception_return +1: INTS_DISABLE bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD - INTS_RESTORE_HARD bl .kernel_fp_unavailable_exception - BUG_OPCODE -1: ld r12,_MSR(r1) - bl .load_up_fpu - b fast_exception_return + b .ret_from_except /* Decrementer Interrupt */ MASKABLE_EXCEPTION(0x900, decrementer, .timer_interrupt, ACK_DEC) @@ -372,7 +370,7 @@ interrupt_end_book3e: /* Watchdog Timer Interrupt */ START_EXCEPTION(watchdog); CRIT_EXCEPTION_PROLOG(0x9f0, PROLOG_ADDITION_NONE) -// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE_ALL) +// EXCEPTION_COMMON(0x9f0, PACA_EXCRIT, INTS_DISABLE) // bl special_reg_save_crit // CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD @@ -391,10 +389,9 @@ interrupt_end_book3e: /* Auxiliary Processor Unavailable Interrupt */ START_EXCEPTION(ap_unavailable); NORMAL_EXCEPTION_PROLOG(0xf20, PROLOG_ADDITION_NONE) - EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_KEEP) - addi r3,r1,STACK_FRAME_OVERHEAD + EXCEPTION_COMMON(0xf20, PACA_EXGEN, INTS_DISABLE) bl .save_nvgprs - INTS_RESTORE_HARD + addi r3,r1,STACK_FRAME_OVERHEAD bl .unknown_exception b .ret_from_except @@ -450,7 +447,7 @@ interrupt_end_book3e: mfspr r15,SPRN_SPRG_CRIT_SCRATCH mtspr SPRN_SPRG_GEN_SCRATCH,r15 mfspr r14,SPRN_DBSR - EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE_ALL) + EXCEPTION_COMMON(0xd00, PACA_EXCRIT, INTS_DISABLE) std r14,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD mr r4,r14 @@ -465,7 +462,7 @@ kernel_dbg_exc: /* Debug exception as a debug interrupt*/ START_EXCEPTION(debug_debug); - DBG_EXCEPTION_PROLOG(0xd00, PROLOG_ADDITION_2REGS) + DBG_EXCEPTION_PROLOG(0xd08, PROLOG_ADDITION_2REGS) /* * If there is a single step or branch-taken exception in an @@ -515,7 +512,7 @@ kernel_dbg_exc: mfspr r15,SPRN_SPRG_DBG_SCRATCH mtspr SPRN_SPRG_GEN_SCRATCH,r15 mfspr r14,SPRN_DBSR - EXCEPTION_COMMON(0xd00, PACA_EXDBG, INTS_DISABLE_ALL) + EXCEPTION_COMMON(0xd08, PACA_EXDBG, INTS_DISABLE) std r14,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD mr r4,r14 @@ -525,21 +522,20 @@ kernel_dbg_exc: bl .DebugException b .ret_from_except - MASKABLE_EXCEPTION(0x260, perfmon, .performance_monitor_exception, ACK_NONE) - -/* Doorbell interrupt */ - START_EXCEPTION(doorbell) - NORMAL_EXCEPTION_PROLOG(0x2070, PROLOG_ADDITION_DOORBELL) - EXCEPTION_COMMON(0x2070, PACA_EXGEN, INTS_DISABLE_ALL) - CHECK_NAPPING() + START_EXCEPTION(perfmon); + NORMAL_EXCEPTION_PROLOG(0x260, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x260, PACA_EXGEN, INTS_DISABLE) addi r3,r1,STACK_FRAME_OVERHEAD - bl .doorbell_exception + bl .performance_monitor_exception b .ret_from_except_lite +/* Doorbell interrupt */ + MASKABLE_EXCEPTION(0x280, doorbell, .doorbell_exception, ACK_NONE) + /* Doorbell critical Interrupt */ START_EXCEPTION(doorbell_crit); - CRIT_EXCEPTION_PROLOG(0x2080, PROLOG_ADDITION_NONE) -// EXCEPTION_COMMON(0x2080, PACA_EXCRIT, INTS_DISABLE_ALL) + CRIT_EXCEPTION_PROLOG(0x2a0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x2a0, PACA_EXCRIT, INTS_DISABLE) // bl special_reg_save_crit // CHECK_NAPPING(); // addi r3,r1,STACK_FRAME_OVERHEAD @@ -547,36 +543,114 @@ kernel_dbg_exc: // b ret_from_crit_except b . +/* Guest Doorbell */ MASKABLE_EXCEPTION(0x2c0, guest_doorbell, .unknown_exception, ACK_NONE) - MASKABLE_EXCEPTION(0x2e0, guest_doorbell_crit, .unknown_exception, ACK_NONE) - MASKABLE_EXCEPTION(0x310, hypercall, .unknown_exception, ACK_NONE) - MASKABLE_EXCEPTION(0x320, ehpriv, .unknown_exception, ACK_NONE) +/* Guest Doorbell critical Interrupt */ + START_EXCEPTION(guest_doorbell_crit); + CRIT_EXCEPTION_PROLOG(0x2e0, PROLOG_ADDITION_NONE) +// EXCEPTION_COMMON(0x2e0, PACA_EXCRIT, INTS_DISABLE) +// bl special_reg_save_crit +// CHECK_NAPPING(); +// addi r3,r1,STACK_FRAME_OVERHEAD +// bl .guest_doorbell_critical_exception +// b ret_from_crit_except + b . + +/* Hypervisor call */ + START_EXCEPTION(hypercall); + NORMAL_EXCEPTION_PROLOG(0x310, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x310, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except + +/* Embedded Hypervisor priviledged */ + START_EXCEPTION(ehpriv); + NORMAL_EXCEPTION_PROLOG(0x320, PROLOG_ADDITION_NONE) + EXCEPTION_COMMON(0x320, PACA_EXGEN, INTS_KEEP) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .save_nvgprs + INTS_RESTORE_HARD + bl .unknown_exception + b .ret_from_except /* - * An interrupt came in while soft-disabled; clear EE in SRR1, - * clear paca->hard_enabled and return. + * An interrupt came in while soft-disabled; We mark paca->irq_happened + * accordingly and if the interrupt is level sensitive, we hard disable */ -masked_doorbell_book3e: - mtcr r10 - /* Resend the doorbell to fire again when ints enabled */ - mfspr r10,SPRN_PIR - PPC_MSGSND(r10) - b masked_interrupt_book3e_common -masked_interrupt_book3e: +masked_interrupt_book3e_0x500: + /* XXX When adding support for EPR, use PACA_IRQ_EE_EDGE */ + li r11,PACA_IRQ_EE + b masked_interrupt_book3e_full_mask + +masked_interrupt_book3e_0x900: + ACK_DEC(r11); + li r11,PACA_IRQ_DEC + b masked_interrupt_book3e_no_mask +masked_interrupt_book3e_0x980: + ACK_FIT(r11); + li r11,PACA_IRQ_DEC + b masked_interrupt_book3e_no_mask +masked_interrupt_book3e_0x280: +masked_interrupt_book3e_0x2c0: + li r11,PACA_IRQ_DBELL + b masked_interrupt_book3e_no_mask + +masked_interrupt_book3e_no_mask: + mtcr r10 + lbz r10,PACAIRQHAPPENED(r13) + or r10,r10,r11 + stb r10,PACAIRQHAPPENED(r13) + b 1f +masked_interrupt_book3e_full_mask: mtcr r10 -masked_interrupt_book3e_common: - stb r11,PACAHARDIRQEN(r13) + lbz r10,PACAIRQHAPPENED(r13) + or r10,r10,r11 + stb r10,PACAIRQHAPPENED(r13) mfspr r10,SPRN_SRR1 rldicl r11,r10,48,1 /* clear MSR_EE */ rotldi r10,r11,16 mtspr SPRN_SRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13); /* restore registers */ +1: ld r10,PACA_EXGEN+EX_R10(r13); ld r11,PACA_EXGEN+EX_R11(r13); mfspr r13,SPRN_SPRG_GEN_SCRATCH; rfi b . +/* + * Called from arch_local_irq_enable when an interrupt needs + * to be resent. r3 contains either 0x500,0x900,0x260 or 0x280 + * to indicate the kind of interrupt. MSR:EE is already off. + * We generate a stackframe like if a real interrupt had happened. + * + * Note: While MSR:EE is off, we need to make sure that _MSR + * in the generated frame has EE set to 1 or the exception + * handler will not properly re-enable them. + */ +_GLOBAL(__replay_interrupt) + /* We are going to jump to the exception common code which + * will retrieve various register values from the PACA which + * we don't give a damn about. + */ + mflr r10 + mfmsr r11 + mfcr r4 + mtspr SPRN_SPRG_GEN_SCRATCH,r13; + std r1,PACA_EXGEN+EX_R1(r13); + stw r4,PACA_EXGEN+EX_CR(r13); + ori r11,r11,MSR_EE + subi r1,r1,INT_FRAME_SIZE; + cmpwi cr0,r3,0x500 + beq exc_0x500_common + cmpwi cr0,r3,0x900 + beq exc_0x900_common + cmpwi cr0,r3,0x280 + beq exc_0x280_common + blr + /* * This is called from 0x300 and 0x400 handlers after the prologs with @@ -591,7 +665,6 @@ storage_fault_common: mr r5,r15 ld r14,PACA_EXGEN+EX_R14(r13) ld r15,PACA_EXGEN+EX_R15(r13) - INTS_RESTORE_HARD bl .do_page_fault cmpdi r3,0 bne- 1f @@ -680,6 +753,8 @@ BAD_STACK_TRAMPOLINE(0x000) BAD_STACK_TRAMPOLINE(0x100) BAD_STACK_TRAMPOLINE(0x200) BAD_STACK_TRAMPOLINE(0x260) +BAD_STACK_TRAMPOLINE(0x280) +BAD_STACK_TRAMPOLINE(0x2a0) BAD_STACK_TRAMPOLINE(0x2c0) BAD_STACK_TRAMPOLINE(0x2e0) BAD_STACK_TRAMPOLINE(0x300) @@ -697,11 +772,10 @@ BAD_STACK_TRAMPOLINE(0xa00) BAD_STACK_TRAMPOLINE(0xb00) BAD_STACK_TRAMPOLINE(0xc00) BAD_STACK_TRAMPOLINE(0xd00) +BAD_STACK_TRAMPOLINE(0xd08) BAD_STACK_TRAMPOLINE(0xe00) BAD_STACK_TRAMPOLINE(0xf00) BAD_STACK_TRAMPOLINE(0xf20) -BAD_STACK_TRAMPOLINE(0x2070) -BAD_STACK_TRAMPOLINE(0x2080) .globl bad_stack_book3e bad_stack_book3e: diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 15c5a4f6de0..2d0868a4e2f 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -12,6 +12,7 @@ * */ +#include <asm/hw_irq.h> #include <asm/exception-64s.h> #include <asm/ptrace.h> @@ -19,7 +20,7 @@ * We layout physical memory as follows: * 0x0000 - 0x00ff : Secondary processor spin code * 0x0100 - 0x2fff : pSeries Interrupt prologs - * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs + * 0x3000 - 0x5fff : interrupt support common interrupt prologs * 0x6000 - 0x6fff : Initial (CPU0) segment table * 0x7000 - 0x7fff : FWNMI data area * 0x8000 - : Early init and support code @@ -356,34 +357,60 @@ do_stab_bolted_pSeries: KVM_HANDLER_PR(PACA_EXGEN, EXC_STD, 0xf40) /* - * An interrupt came in while soft-disabled; clear EE in SRR1, - * clear paca->hard_enabled and return. + * An interrupt came in while soft-disabled. We set paca->irq_happened, + * then, if it was a decrementer interrupt, we bump the dec to max and + * and return, else we hard disable and return. This is called with + * r10 containing the value to OR to the paca field. */ -masked_interrupt: - stb r10,PACAHARDIRQEN(r13) - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - mfspr r10,SPRN_SRR1 - rldicl r10,r10,48,1 /* clear MSR_EE */ - rotldi r10,r10,16 - mtspr SPRN_SRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13) - GET_SCRATCH0(r13) - rfid +#define MASKED_INTERRUPT(_H) \ +masked_##_H##interrupt: \ + std r11,PACA_EXGEN+EX_R11(r13); \ + lbz r11,PACAIRQHAPPENED(r13); \ + or r11,r11,r10; \ + stb r11,PACAIRQHAPPENED(r13); \ + andi. r10,r10,PACA_IRQ_DEC; \ + beq 1f; \ + lis r10,0x7fff; \ + ori r10,r10,0xffff; \ + mtspr SPRN_DEC,r10; \ + b 2f; \ +1: mfspr r10,SPRN_##_H##SRR1; \ + rldicl r10,r10,48,1; /* clear MSR_EE */ \ + rotldi r10,r10,16; \ + mtspr SPRN_##_H##SRR1,r10; \ +2: mtcrf 0x80,r9; \ + ld r9,PACA_EXGEN+EX_R9(r13); \ + ld r10,PACA_EXGEN+EX_R10(r13); \ + ld r11,PACA_EXGEN+EX_R11(r13); \ + GET_SCRATCH0(r13); \ + ##_H##rfid; \ b . + + MASKED_INTERRUPT() + MASKED_INTERRUPT(H) -masked_Hinterrupt: - stb r10,PACAHARDIRQEN(r13) - mtcrf 0x80,r9 - ld r9,PACA_EXGEN+EX_R9(r13) - mfspr r10,SPRN_HSRR1 - rldicl r10,r10,48,1 /* clear MSR_EE */ - rotldi r10,r10,16 - mtspr SPRN_HSRR1,r10 - ld r10,PACA_EXGEN+EX_R10(r13) - GET_SCRATCH0(r13) - hrfid - b . +/* + * Called from arch_local_irq_enable when an interrupt needs + * to be resent. r3 contains 0x500 or 0x900 to indicate which + * kind of interrupt. MSR:EE is already off. We generate a + * stackframe like if a real interrupt had happened. + * + * Note: While MSR:EE is off, we need to make sure that _MSR + * in the generated frame has EE set to 1 or the exception + * handler will not properly re-enable them. + */ +_GLOBAL(__replay_interrupt) + /* We are going to jump to the exception common code which + * will retrieve various register values from the PACA which + * we don't give a damn about, so we don't bother storing them. + */ + mfmsr r12 + mflr r11 + mfcr r9 + ori r12,r12,MSR_EE + andi. r3,r3,0x0800 + bne decrementer_common + b hardware_interrupt_common #ifdef CONFIG_PPC_PSERIES /* @@ -458,14 +485,15 @@ machine_check_common: bl .machine_check_exception b .ret_from_except - STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt) + STD_EXCEPTION_COMMON_ASYNC(0x500, hardware_interrupt, do_IRQ) + STD_EXCEPTION_COMMON_ASYNC(0x900, decrementer, .timer_interrupt) STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception) STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception) STD_EXCEPTION_COMMON(0xd00, single_step, .single_step_exception) STD_EXCEPTION_COMMON(0xe00, trap_0e, .unknown_exception) STD_EXCEPTION_COMMON(0xe40, emulation_assist, .program_check_exception) STD_EXCEPTION_COMMON(0xe60, hmi_exception, .unknown_exception) - STD_EXCEPTION_COMMON_IDLE(0xf00, performance_monitor, .performance_monitor_exception) + STD_EXCEPTION_COMMON_ASYNC(0xf00, performance_monitor, .performance_monitor_exception) STD_EXCEPTION_COMMON(0x1300, instruction_breakpoint, .instruction_breakpoint_exception) #ifdef CONFIG_ALTIVEC STD_EXCEPTION_COMMON(0x1700, altivec_assist, .altivec_assist_exception) @@ -482,6 +510,9 @@ machine_check_common: system_call_entry: b system_call_common +ppc64_runlatch_on_trampoline: + b .__ppc64_runlatch_on + /* * Here we have detected that the kernel stack pointer is bad. * R9 contains the saved CR, r13 points to the paca, @@ -555,6 +586,8 @@ data_access_common: mfspr r10,SPRN_DSISR stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0x300, PACA_EXGEN) + DISABLE_INTS + ld r12,_MSR(r1) ld r3,PACA_EXGEN+EX_DAR(r13) lwz r4,PACA_EXGEN+EX_DSISR(r13) li r5,0x300 @@ -569,6 +602,7 @@ h_data_storage_common: stw r10,PACA_EXGEN+EX_DSISR(r13) EXCEPTION_PROLOG_COMMON(0xe00, PACA_EXGEN) bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD bl .unknown_exception b .ret_from_except @@ -577,6 +611,8 @@ h_data_storage_common: .globl instruction_access_common instruction_access_common: EXCEPTION_PROLOG_COMMON(0x400, PACA_EXGEN) + DISABLE_INTS + ld r12,_MSR(r1) ld r3,_NIP(r1) andis. r4,r12,0x5820 li r5,0x400 @@ -672,12 +708,6 @@ _GLOBAL(slb_miss_realmode) ld r10,PACA_EXSLB+EX_LR(r13) ld r3,PACA_EXSLB+EX_R3(r13) lwz r9,PACA_EXSLB+EX_CCR(r13) /* get saved CR */ -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - ld r11,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r11) /* get SRR0 value */ -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ mtlr r10 @@ -690,12 +720,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) mtcrf 0x01,r9 /* slb_allocate uses cr0 and cr7 */ .machine pop -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ ld r9,PACA_EXSLB+EX_R9(r13) ld r10,PACA_EXSLB+EX_R10(r13) ld r11,PACA_EXSLB+EX_R11(r13) @@ -704,13 +728,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) rfid b . /* prevent speculative execution */ -2: -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - b unrecov_slb -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ - mfspr r11,SPRN_SRR0 +2: mfspr r11,SPRN_SRR0 ld r10,PACAKBASE(r13) LOAD_HANDLER(r10,unrecov_slb) mtspr SPRN_SRR0,r10 @@ -727,20 +745,6 @@ unrecov_slb: bl .unrecoverable_exception b 1b - .align 7 - .globl hardware_interrupt_common - .globl hardware_interrupt_entry -hardware_interrupt_common: - EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN) - FINISH_NAP -hardware_interrupt_entry: - DISABLE_INTS -BEGIN_FTR_SECTION - bl .ppc64_runlatch_on -END_FTR_SECTION_IFSET(CPU_FTR_CTRL) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_IRQ - b .ret_from_except_lite #ifdef CONFIG_PPC_970_NAP power4_fixup_nap: @@ -785,8 +789,8 @@ fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) bne 1f /* if from user, just load it up */ bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .kernel_fp_unavailable_exception BUG_OPCODE 1: bl .load_up_fpu @@ -805,8 +809,8 @@ BEGIN_FTR_SECTION END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) #endif bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .altivec_unavailable_exception b .ret_from_except @@ -816,13 +820,14 @@ vsx_unavailable_common: EXCEPTION_PROLOG_COMMON(0xf40, PACA_EXGEN) #ifdef CONFIG_VSX BEGIN_FTR_SECTION - bne .load_up_vsx + beq 1f + b .load_up_vsx 1: END_FTR_SECTION_IFSET(CPU_FTR_VSX) #endif bl .save_nvgprs + DISABLE_INTS addi r3,r1,STACK_FRAME_OVERHEAD - ENABLE_INTS bl .vsx_unavailable_exception b .ret_from_except @@ -831,66 +836,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_VSX) __end_handlers: /* - * Return from an exception with minimal checks. - * The caller is assumed to have done EXCEPTION_PROLOG_COMMON. - * If interrupts have been enabled, or anything has been - * done that might have changed the scheduling status of - * any task or sent any task a signal, you should use - * ret_from_except or ret_from_except_lite instead of this. - */ -fast_exc_return_irq: /* restores irq state too */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ(r3); - ld r12,_MSR(r1) - rldicl r4,r12,49,63 /* get MSR_EE to LSB */ - stb r4,PACAHARDIRQEN(r13) /* restore paca->hard_enabled */ - b 1f - - .globl fast_exception_return -fast_exception_return: - ld r12,_MSR(r1) -1: ld r11,_NIP(r1) - andi. r3,r12,MSR_RI /* check if RI is set */ - beq- unrecov_fer - -#ifdef CONFIG_VIRT_CPU_ACCOUNTING - andi. r3,r12,MSR_PR - beq 2f - ACCOUNT_CPU_USER_EXIT(r3, r4) -2: -#endif - - ld r3,_CCR(r1) - ld r4,_LINK(r1) - ld r5,_CTR(r1) - ld r6,_XER(r1) - mtcr r3 - mtlr r4 - mtctr r5 - mtxer r6 - REST_GPR(0, r1) - REST_8GPRS(2, r1) - - mfmsr r10 - rldicl r10,r10,48,1 /* clear EE */ - rldicr r10,r10,16,61 /* clear RI (LE is 0 already) */ - mtmsrd r10,1 - - mtspr SPRN_SRR1,r12 - mtspr SPRN_SRR0,r11 - REST_4GPRS(10, r1) - ld r1,GPR1(r1) - rfid - b . /* prevent speculative execution */ - -unrecov_fer: - bl .save_nvgprs -1: addi r3,r1,STACK_FRAME_OVERHEAD - bl .unrecoverable_exception - b 1b - - -/* * Hash table stuff */ .align 7 @@ -912,28 +857,6 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) lwz r0,TI_PREEMPT(r11) /* If we're in an "NMI" */ andis. r0,r0,NMI_MASK@h /* (i.e. an irq when soft-disabled) */ bne 77f /* then don't call hash_page now */ - - /* - * On iSeries, we soft-disable interrupts here, then - * hard-enable interrupts so that the hash_page code can spin on - * the hash_table_lock without problems on a shared processor. - */ - DISABLE_INTS - - /* - * Currently, trace_hardirqs_off() will be called by DISABLE_INTS - * and will clobber volatile registers when irq tracing is enabled - * so we need to reload them. It may be possible to be smarter here - * and move the irq tracing elsewhere but let's keep it simple for - * now - */ -#ifdef CONFIG_TRACE_IRQFLAGS - ld r3,_DAR(r1) - ld r4,_DSISR(r1) - ld r5,_TRAP(r1) - ld r12,_MSR(r1) - clrrdi r5,r5,4 -#endif /* CONFIG_TRACE_IRQFLAGS */ /* * We need to set the _PAGE_USER bit if MSR_PR is set or if we are * accessing a userspace segment (even from the kernel). We assume @@ -951,62 +874,25 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB) * r4 contains the required access permissions * r5 contains the trap number * - * at return r3 = 0 for success + * at return r3 = 0 for success, 1 for page fault, negative for error */ bl .hash_page /* build HPTE if possible */ cmpdi r3,0 /* see if hash_page succeeded */ -BEGIN_FW_FTR_SECTION - /* - * If we had interrupts soft-enabled at the point where the - * DSI/ISI occurred, and an interrupt came in during hash_page, - * handle it now. - * We jump to ret_from_except_lite rather than fast_exception_return - * because ret_from_except_lite will check for and handle pending - * interrupts if necessary. - */ - beq 13f -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) - -BEGIN_FW_FTR_SECTION - /* - * Here we have interrupts hard-disabled, so it is sufficient - * to restore paca->{soft,hard}_enable and get out. - */ + /* Success */ beq fast_exc_return_irq /* Return from exception on success */ -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) - - /* For a hash failure, we don't bother re-enabling interrupts */ - ble- 12f - - /* - * hash_page couldn't handle it, set soft interrupt enable back - * to what it was before the trap. Note that .arch_local_irq_restore - * handles any interrupts pending at this point. - */ - ld r3,SOFTE(r1) - TRACE_AND_RESTORE_IRQ_PARTIAL(r3, 11f) - bl .arch_local_irq_restore - b 11f -/* We have a data breakpoint exception - handle it */ -handle_dabr_fault: - bl .save_nvgprs - ld r4,_DAR(r1) - ld r5,_DSISR(r1) - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_dabr - b .ret_from_except_lite + /* Error */ + blt- 13f /* Here we have a page fault that hash_page can't handle. */ handle_page_fault: - ENABLE_INTS 11: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl .do_page_fault cmpdi r3,0 - beq+ 13f + beq+ 12f bl .save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD @@ -1014,12 +900,20 @@ handle_page_fault: bl .bad_page_fault b .ret_from_except -13: b .ret_from_except_lite +/* We have a data breakpoint exception - handle it */ +handle_dabr_fault: + bl .save_nvgprs + ld r4,_DAR(r1) + ld r5,_DSISR(r1) + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_dabr +12: b .ret_from_except_lite + /* We have a page fault that hash_page could handle but HV refused * the PTE insertion */ -12: bl .save_nvgprs +13: bl .save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD ld r4,_DAR(r1) @@ -1141,51 +1035,19 @@ _GLOBAL(do_stab_bolted) .= 0x7000 .globl fwnmi_data_area fwnmi_data_area: -#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ - /* iSeries does not use the FWNMI stuff, so it is safe to put - * this here, even if we later allow kernels that will boot on - * both pSeries and iSeries */ -#ifdef CONFIG_PPC_ISERIES - . = LPARMAP_PHYS - .globl xLparMap -xLparMap: - .quad HvEsidsToMap /* xNumberEsids */ - .quad HvRangesToMap /* xNumberRanges */ - .quad STAB0_PAGE /* xSegmentTableOffs */ - .zero 40 /* xRsvd */ - /* xEsids (HvEsidsToMap entries of 2 quads) */ - .quad PAGE_OFFSET_ESID /* xKernelEsid */ - .quad PAGE_OFFSET_VSID /* xKernelVsid */ - .quad VMALLOC_START_ESID /* xKernelEsid */ - .quad VMALLOC_START_VSID /* xKernelVsid */ - /* xRanges (HvRangesToMap entries of 3 quads) */ - .quad HvPagesToMap /* xPages */ - .quad 0 /* xOffset */ - .quad PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT) /* xVPN */ - -#endif /* CONFIG_PPC_ISERIES */ - -#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* pseries and powernv need to keep the whole page from * 0x7000 to 0x8000 free for use by the firmware */ . = 0x8000 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */ -/* - * Space for CPU0's segment table. - * - * On iSeries, the hypervisor must fill in at least one entry before - * we get control (with relocate on). The address is given to the hv - * as a page number (see xLparMap above), so this must be at a - * fixed address (the linker can't compute (u64)&initial_stab >> - * PAGE_SHIFT). - */ - . = STAB0_OFFSET /* 0x8000 */ +/* Space for CPU0's segment table */ + .balign 4096 .globl initial_stab initial_stab: .space 4096 + #ifdef CONFIG_PPC_POWERNV _GLOBAL(opal_mc_secondary_handler) HMT_MEDIUM diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c new file mode 100644 index 00000000000..cfe7a38708c --- /dev/null +++ b/arch/powerpc/kernel/fadump.c @@ -0,0 +1,1315 @@ +/* + * Firmware Assisted dump: A robust mechanism to get reliable kernel crash + * dump with assistance from firmware. This approach does not use kexec, + * instead firmware assists in booting the kdump kernel while preserving + * memory contents. The most of the code implementation has been adapted + * from phyp assisted dump implementation written by Linas Vepstas and + * Manish Ahuja + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright 2011 IBM Corporation + * Author: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> + */ + +#undef DEBUG +#define pr_fmt(fmt) "fadump: " fmt + +#include <linux/string.h> +#include <linux/memblock.h> +#include <linux/delay.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/crash_dump.h> +#include <linux/kobject.h> +#include <linux/sysfs.h> + +#include <asm/page.h> +#include <asm/prom.h> +#include <asm/rtas.h> +#include <asm/fadump.h> + +static struct fw_dump fw_dump; +static struct fadump_mem_struct fdm; +static const struct fadump_mem_struct *fdm_active; + +static DEFINE_MUTEX(fadump_mutex); +struct fad_crash_memory_ranges crash_memory_ranges[INIT_CRASHMEM_RANGES]; +int crash_mem_ranges; + +/* Scan the Firmware Assisted dump configuration details. */ +int __init early_init_dt_scan_fw_dump(unsigned long node, + const char *uname, int depth, void *data) +{ + __be32 *sections; + int i, num_sections; + unsigned long size; + const int *token; + + if (depth != 1 || strcmp(uname, "rtas") != 0) + return 0; + + /* + * Check if Firmware Assisted dump is supported. if yes, check + * if dump has been initiated on last reboot. + */ + token = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL); + if (!token) + return 0; + + fw_dump.fadump_supported = 1; + fw_dump.ibm_configure_kernel_dump = *token; + + /* + * The 'ibm,kernel-dump' rtas node is present only if there is + * dump data waiting for us. + */ + fdm_active = of_get_flat_dt_prop(node, "ibm,kernel-dump", NULL); + if (fdm_active) + fw_dump.dump_active = 1; + + /* Get the sizes required to store dump data for the firmware provided + * dump sections. + * For each dump section type supported, a 32bit cell which defines + * the ID of a supported section followed by two 32 bit cells which + * gives teh size of the section in bytes. + */ + sections = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes", + &size); + + if (!sections) + return 0; + + num_sections = size / (3 * sizeof(u32)); + + for (i = 0; i < num_sections; i++, sections += 3) { + u32 type = (u32)of_read_number(sections, 1); + + switch (type) { + case FADUMP_CPU_STATE_DATA: + fw_dump.cpu_state_data_size = + of_read_ulong(§ions[1], 2); + break; + case FADUMP_HPTE_REGION: + fw_dump.hpte_region_size = + of_read_ulong(§ions[1], 2); + break; + } + } + return 1; +} + +int is_fadump_active(void) +{ + return fw_dump.dump_active; +} + +/* Print firmware assisted dump configurations for debugging purpose. */ +static void fadump_show_config(void) +{ + pr_debug("Support for firmware-assisted dump (fadump): %s\n", + (fw_dump.fadump_supported ? "present" : "no support")); + + if (!fw_dump.fadump_supported) + return; + + pr_debug("Fadump enabled : %s\n", + (fw_dump.fadump_enabled ? "yes" : "no")); + pr_debug("Dump Active : %s\n", + (fw_dump.dump_active ? "yes" : "no")); + pr_debug("Dump section sizes:\n"); + pr_debug(" CPU state data size: %lx\n", fw_dump.cpu_state_data_size); + pr_debug(" HPTE region size : %lx\n", fw_dump.hpte_region_size); + pr_debug("Boot memory size : %lx\n", fw_dump.boot_memory_size); +} + +static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm, + unsigned long addr) +{ + if (!fdm) + return 0; + + memset(fdm, 0, sizeof(struct fadump_mem_struct)); + addr = addr & PAGE_MASK; + + fdm->header.dump_format_version = 0x00000001; + fdm->header.dump_num_sections = 3; + fdm->header.dump_status_flag = 0; + fdm->header.offset_first_dump_section = + (u32)offsetof(struct fadump_mem_struct, cpu_state_data); + + /* + * Fields for disk dump option. + * We are not using disk dump option, hence set these fields to 0. + */ + fdm->header.dd_block_size = 0; + fdm->header.dd_block_offset = 0; + fdm->header.dd_num_blocks = 0; + fdm->header.dd_offset_disk_path = 0; + + /* set 0 to disable an automatic dump-reboot. */ + fdm->header.max_time_auto = 0; + + /* Kernel dump sections */ + /* cpu state data section. */ + fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG; + fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA; + fdm->cpu_state_data.source_address = 0; + fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size; + fdm->cpu_state_data.destination_address = addr; + addr += fw_dump.cpu_state_data_size; + + /* hpte region section */ + fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG; + fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION; + fdm->hpte_region.source_address = 0; + fdm->hpte_region.source_len = fw_dump.hpte_region_size; + fdm->hpte_region.destination_address = addr; + addr += fw_dump.hpte_region_size; + + /* RMA region section */ + fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG; + fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION; + fdm->rmr_region.source_address = RMA_START; + fdm->rmr_region.source_len = fw_dump.boot_memory_size; + fdm->rmr_region.destination_address = addr; + addr += fw_dump.boot_memory_size; + + return addr; +} + +/** + * fadump_calculate_reserve_size(): reserve variable boot area 5% of System RAM + * + * Function to find the largest memory size we need to reserve during early + * boot process. This will be the size of the memory that is required for a + * kernel to boot successfully. + * + * This function has been taken from phyp-assisted dump feature implementation. + * + * returns larger of 256MB or 5% rounded down to multiples of 256MB. + * + * TODO: Come up with better approach to find out more accurate memory size + * that is required for a kernel to boot successfully. + * + */ +static inline unsigned long fadump_calculate_reserve_size(void) +{ + unsigned long size; + + /* + * Check if the size is specified through fadump_reserve_mem= cmdline + * option. If yes, then use that. + */ + if (fw_dump.reserve_bootvar) + return fw_dump.reserve_bootvar; + + /* divide by 20 to get 5% of value */ + size = memblock_end_of_DRAM() / 20; + + /* round it down in multiples of 256 */ + size = size & ~0x0FFFFFFFUL; + + /* Truncate to memory_limit. We don't want to over reserve the memory.*/ + if (memory_limit && size > memory_limit) + size = memory_limit; + + return (size > MIN_BOOT_MEM ? size : MIN_BOOT_MEM); +} + +/* + * Calculate the total memory size required to be reserved for + * firmware-assisted dump registration. + */ +static unsigned long get_fadump_area_size(void) +{ + unsigned long size = 0; + + size += fw_dump.cpu_state_data_size; + size += fw_dump.hpte_region_size; + size += fw_dump.boot_memory_size; + size += sizeof(struct fadump_crash_info_header); + size += sizeof(struct elfhdr); /* ELF core header.*/ + size += sizeof(struct elf_phdr); /* place holder for cpu notes */ + /* Program headers for crash memory regions. */ + size += sizeof(struct elf_phdr) * (memblock_num_regions(memory) + 2); + + size = PAGE_ALIGN(size); + return size; +} + +int __init fadump_reserve_mem(void) +{ + unsigned long base, size, memory_boundary; + + if (!fw_dump.fadump_enabled) + return 0; + + if (!fw_dump.fadump_supported) { + printk(KERN_INFO "Firmware-assisted dump is not supported on" + " this hardware\n"); + fw_dump.fadump_enabled = 0; + return 0; + } + /* + * Initialize boot memory size + * If dump is active then we have already calculated the size during + * first kernel. + */ + if (fdm_active) + fw_dump.boot_memory_size = fdm_active->rmr_region.source_len; + else + fw_dump.boot_memory_size = fadump_calculate_reserve_size(); + + /* + * Calculate the memory boundary. + * If memory_limit is less than actual memory boundary then reserve + * the memory for fadump beyond the memory_limit and adjust the + * memory_limit accordingly, so that the running kernel can run with + * specified memory_limit. + */ + if (memory_limit && memory_limit < memblock_end_of_DRAM()) { + size = get_fadump_area_size(); + if ((memory_limit + size) < memblock_end_of_DRAM()) + memory_limit += size; + else + memory_limit = memblock_end_of_DRAM(); + printk(KERN_INFO "Adjusted memory_limit for firmware-assisted" + " dump, now %#016llx\n", + (unsigned long long)memory_limit); + } + if (memory_limit) + memory_boundary = memory_limit; + else + memory_boundary = memblock_end_of_DRAM(); + + if (fw_dump.dump_active) { + printk(KERN_INFO "Firmware-assisted dump is active.\n"); + /* + * If last boot has crashed then reserve all the memory + * above boot_memory_size so that we don't touch it until + * dump is written to disk by userspace tool. This memory + * will be released for general use once the dump is saved. + */ + base = fw_dump.boot_memory_size; + size = memory_boundary - base; + memblock_reserve(base, size); + printk(KERN_INFO "Reserved %ldMB of memory at %ldMB " + "for saving crash dump\n", + (unsigned long)(size >> 20), + (unsigned long)(base >> 20)); + + fw_dump.fadumphdr_addr = + fdm_active->rmr_region.destination_address + + fdm_active->rmr_region.source_len; + pr_debug("fadumphdr_addr = %p\n", + (void *) fw_dump.fadumphdr_addr); + } else { + /* Reserve the memory at the top of memory. */ + size = get_fadump_area_size(); + base = memory_boundary - size; + memblock_reserve(base, size); + printk(KERN_INFO "Reserved %ldMB of memory at %ldMB " + "for firmware-assisted dump\n", + (unsigned long)(size >> 20), + (unsigned long)(base >> 20)); + } + fw_dump.reserve_dump_area_start = base; + fw_dump.reserve_dump_area_size = size; + return 1; +} + +/* Look for fadump= cmdline option. */ +static int __init early_fadump_param(char *p) +{ + if (!p) + return 1; + + if (strncmp(p, "on", 2) == 0) + fw_dump.fadump_enabled = 1; + else if (strncmp(p, "off", 3) == 0) + fw_dump.fadump_enabled = 0; + + return 0; +} +early_param("fadump", early_fadump_param); + +/* Look for fadump_reserve_mem= cmdline option */ +static int __init early_fadump_reserve_mem(char *p) +{ + if (p) + fw_dump.reserve_bootvar = memparse(p, &p); + return 0; +} +early_param("fadump_reserve_mem", early_fadump_reserve_mem); + +static void register_fw_dump(struct fadump_mem_struct *fdm) +{ + int rc; + unsigned int wait_time; + + pr_debug("Registering for firmware-assisted kernel dump...\n"); + + /* TODO: Add upper time limit for the delay */ + do { + rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL, + FADUMP_REGISTER, fdm, + sizeof(struct fadump_mem_struct)); + + wait_time = rtas_busy_delay_time(rc); + if (wait_time) + mdelay(wait_time); + + } while (wait_time); + + switch (rc) { + case -1: + printk(KERN_ERR "Failed to register firmware-assisted kernel" + " dump. Hardware Error(%d).\n", rc); + break; + case -3: + printk(KERN_ERR "Failed to register firmware-assisted kernel" + " dump. Parameter Error(%d).\n", rc); + break; + case -9: + printk(KERN_ERR "firmware-assisted kernel dump is already " + " registered."); + fw_dump.dump_registered = 1; + break; + case 0: + printk(KERN_INFO "firmware-assisted kernel dump registration" + " is successful\n"); + fw_dump.dump_registered = 1; + break; + } +} + +void crash_fadump(struct pt_regs *regs, const char *str) +{ + struct fadump_crash_info_header *fdh = NULL; + + if (!fw_dump.dump_registered || !fw_dump.fadumphdr_addr) + return; + + fdh = __va(fw_dump.fadumphdr_addr); + crashing_cpu = smp_processor_id(); + fdh->crashing_cpu = crashing_cpu; + crash_save_vmcoreinfo(); + + if (regs) + fdh->regs = *regs; + else + ppc_save_regs(&fdh->regs); + + fdh->cpu_online_mask = *cpu_online_mask; + + /* Call ibm,os-term rtas call to trigger firmware assisted dump */ + rtas_os_term((char *)str); +} + +#define GPR_MASK 0xffffff0000000000 +static inline int fadump_gpr_index(u64 id) +{ + int i = -1; + char str[3]; + + if ((id & GPR_MASK) == REG_ID("GPR")) { + /* get the digits at the end */ + id &= ~GPR_MASK; + id >>= 24; + str[2] = '\0'; + str[1] = id & 0xff; + str[0] = (id >> 8) & 0xff; + sscanf(str, "%d", &i); + if (i > 31) + i = -1; + } + return i; +} + +static inline void fadump_set_regval(struct pt_regs *regs, u64 reg_id, + u64 reg_val) +{ + int i; + + i = fadump_gpr_index(reg_id); + if (i >= 0) + regs->gpr[i] = (unsigned long)reg_val; + else if (reg_id == REG_ID("NIA")) + regs->nip = (unsigned long)reg_val; + else if (reg_id == REG_ID("MSR")) + regs->msr = (unsigned long)reg_val; + else if (reg_id == REG_ID("CTR")) + regs->ctr = (unsigned long)reg_val; + else if (reg_id == REG_ID("LR")) + regs->link = (unsigned long)reg_val; + else if (reg_id == REG_ID("XER")) + regs->xer = (unsigned long)reg_val; + else if (reg_id == REG_ID("CR")) + regs->ccr = (unsigned long)reg_val; + else if (reg_id == REG_ID("DAR")) + regs->dar = (unsigned long)reg_val; + else if (reg_id == REG_ID("DSISR")) + regs->dsisr = (unsigned long)reg_val; +} + +static struct fadump_reg_entry* +fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs) +{ + memset(regs, 0, sizeof(struct pt_regs)); + + while (reg_entry->reg_id != REG_ID("CPUEND")) { + fadump_set_regval(regs, reg_entry->reg_id, + reg_entry->reg_value); + reg_entry++; + } + reg_entry++; + return reg_entry; +} + +static u32 *fadump_append_elf_note(u32 *buf, char *name, unsigned type, + void *data, size_t data_len) +{ + struct elf_note note; + + note.n_namesz = strlen(name) + 1; + note.n_descsz = data_len; + note.n_type = type; + memcpy(buf, ¬e, sizeof(note)); + buf += (sizeof(note) + 3)/4; + memcpy(buf, name, note.n_namesz); + buf += (note.n_namesz + 3)/4; + memcpy(buf, data, note.n_descsz); + buf += (note.n_descsz + 3)/4; + + return buf; +} + +static void fadump_final_note(u32 *buf) +{ + struct elf_note note; + + note.n_namesz = 0; + note.n_descsz = 0; + note.n_type = 0; + memcpy(buf, ¬e, sizeof(note)); +} + +static u32 *fadump_regs_to_elf_notes(u32 *buf, struct pt_regs *regs) +{ + struct elf_prstatus prstatus; + + memset(&prstatus, 0, sizeof(prstatus)); + /* + * FIXME: How do i get PID? Do I really need it? + * prstatus.pr_pid = ???? + */ + elf_core_copy_kernel_regs(&prstatus.pr_reg, regs); + buf = fadump_append_elf_note(buf, KEXEC_CORE_NOTE_NAME, NT_PRSTATUS, + &prstatus, sizeof(prstatus)); + return buf; +} + +static void fadump_update_elfcore_header(char *bufp) +{ + struct elfhdr *elf; + struct elf_phdr *phdr; + + elf = (struct elfhdr *)bufp; + bufp += sizeof(struct elfhdr); + + /* First note is a place holder for cpu notes info. */ + phdr = (struct elf_phdr *)bufp; + + if (phdr->p_type == PT_NOTE) { + phdr->p_paddr = fw_dump.cpu_notes_buf; + phdr->p_offset = phdr->p_paddr; + phdr->p_filesz = fw_dump.cpu_notes_buf_size; + phdr->p_memsz = fw_dump.cpu_notes_buf_size; + } + return; +} + +static void *fadump_cpu_notes_buf_alloc(unsigned long size) +{ + void *vaddr; + struct page *page; + unsigned long order, count, i; + + order = get_order(size); + vaddr = (void *)__get_free_pages(GFP_KERNEL|__GFP_ZERO, order); + if (!vaddr) + return NULL; + + count = 1 << order; + page = virt_to_page(vaddr); + for (i = 0; i < count; i++) + SetPageReserved(page + i); + return vaddr; +} + +static void fadump_cpu_notes_buf_free(unsigned long vaddr, unsigned long size) +{ + struct page *page; + unsigned long order, count, i; + + order = get_order(size); + count = 1 << order; + page = virt_to_page(vaddr); + for (i = 0; i < count; i++) + ClearPageReserved(page + i); + __free_pages(page, order); +} + +/* + * Read CPU state dump data and convert it into ELF notes. + * The CPU dump starts with magic number "REGSAVE". NumCpusOffset should be + * used to access the data to allow for additional fields to be added without + * affecting compatibility. Each list of registers for a CPU starts with + * "CPUSTRT" and ends with "CPUEND". Each register entry is of 16 bytes, + * 8 Byte ASCII identifier and 8 Byte register value. The register entry + * with identifier "CPUSTRT" and "CPUEND" contains 4 byte cpu id as part + * of register value. For more details refer to PAPR document. + * + * Only for the crashing cpu we ignore the CPU dump data and get exact + * state from fadump crash info structure populated by first kernel at the + * time of crash. + */ +static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm) +{ + struct fadump_reg_save_area_header *reg_header; + struct fadump_reg_entry *reg_entry; + struct fadump_crash_info_header *fdh = NULL; + void *vaddr; + unsigned long addr; + u32 num_cpus, *note_buf; + struct pt_regs regs; + int i, rc = 0, cpu = 0; + + if (!fdm->cpu_state_data.bytes_dumped) + return -EINVAL; + + addr = fdm->cpu_state_data.destination_address; + vaddr = __va(addr); + + reg_header = vaddr; + if (reg_header->magic_number != REGSAVE_AREA_MAGIC) { + printk(KERN_ERR "Unable to read register save area.\n"); + return -ENOENT; + } + pr_debug("--------CPU State Data------------\n"); + pr_debug("Magic Number: %llx\n", reg_header->magic_number); + pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset); + + vaddr += reg_header->num_cpu_offset; + num_cpus = *((u32 *)(vaddr)); + pr_debug("NumCpus : %u\n", num_cpus); + vaddr += sizeof(u32); + reg_entry = (struct fadump_reg_entry *)vaddr; + + /* Allocate buffer to hold cpu crash notes. */ + fw_dump.cpu_notes_buf_size = num_cpus * sizeof(note_buf_t); + fw_dump.cpu_notes_buf_size = PAGE_ALIGN(fw_dump.cpu_notes_buf_size); + note_buf = fadump_cpu_notes_buf_alloc(fw_dump.cpu_notes_buf_size); + if (!note_buf) { + printk(KERN_ERR "Failed to allocate 0x%lx bytes for " + "cpu notes buffer\n", fw_dump.cpu_notes_buf_size); + return -ENOMEM; + } + fw_dump.cpu_notes_buf = __pa(note_buf); + + pr_debug("Allocated buffer for cpu notes of size %ld at %p\n", + (num_cpus * sizeof(note_buf_t)), note_buf); + + if (fw_dump.fadumphdr_addr) + fdh = __va(fw_dump.fadumphdr_addr); + + for (i = 0; i < num_cpus; i++) { + if (reg_entry->reg_id != REG_ID("CPUSTRT")) { + printk(KERN_ERR "Unable to read CPU state data\n"); + rc = -ENOENT; + goto error_out; + } + /* Lower 4 bytes of reg_value contains logical cpu id */ + cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK; + if (!cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) { + SKIP_TO_NEXT_CPU(reg_entry); + continue; + } + pr_debug("Reading register data for cpu %d...\n", cpu); + if (fdh && fdh->crashing_cpu == cpu) { + regs = fdh->regs; + note_buf = fadump_regs_to_elf_notes(note_buf, ®s); + SKIP_TO_NEXT_CPU(reg_entry); + } else { + reg_entry++; + reg_entry = fadump_read_registers(reg_entry, ®s); + note_buf = fadump_regs_to_elf_notes(note_buf, ®s); + } + } + fadump_final_note(note_buf); + + pr_debug("Updating elfcore header (%llx) with cpu notes\n", + fdh->elfcorehdr_addr); + fadump_update_elfcore_header((char *)__va(fdh->elfcorehdr_addr)); + return 0; + +error_out: + fadump_cpu_notes_buf_free((unsigned long)__va(fw_dump.cpu_notes_buf), + fw_dump.cpu_notes_buf_size); + fw_dump.cpu_notes_buf = 0; + fw_dump.cpu_notes_buf_size = 0; + return rc; + +} + +/* + * Validate and process the dump data stored by firmware before exporting + * it through '/proc/vmcore'. + */ +static int __init process_fadump(const struct fadump_mem_struct *fdm_active) +{ + struct fadump_crash_info_header *fdh; + int rc = 0; + + if (!fdm_active || !fw_dump.fadumphdr_addr) + return -EINVAL; + + /* Check if the dump data is valid. */ + if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) || + (fdm_active->cpu_state_data.error_flags != 0) || + (fdm_active->rmr_region.error_flags != 0)) { + printk(KERN_ERR "Dump taken by platform is not valid\n"); + return -EINVAL; + } + if ((fdm_active->rmr_region.bytes_dumped != + fdm_active->rmr_region.source_len) || + !fdm_active->cpu_state_data.bytes_dumped) { + printk(KERN_ERR "Dump taken by platform is incomplete\n"); + return -EINVAL; + } + + /* Validate the fadump crash info header */ + fdh = __va(fw_dump.fadumphdr_addr); + if (fdh->magic_number != FADUMP_CRASH_INFO_MAGIC) { + printk(KERN_ERR "Crash info header is not valid.\n"); + return -EINVAL; + } + + rc = fadump_build_cpu_notes(fdm_active); + if (rc) + return rc; + + /* + * We are done validating dump info and elfcore header is now ready + * to be exported. set elfcorehdr_addr so that vmcore module will + * export the elfcore header through '/proc/vmcore'. + */ + elfcorehdr_addr = fdh->elfcorehdr_addr; + + return 0; +} + +static inline void fadump_add_crash_memory(unsigned long long base, + unsigned long long end) +{ + if (base == end) + return; + + pr_debug("crash_memory_range[%d] [%#016llx-%#016llx], %#llx bytes\n", + crash_mem_ranges, base, end - 1, (end - base)); + crash_memory_ranges[crash_mem_ranges].base = base; + crash_memory_ranges[crash_mem_ranges].size = end - base; + crash_mem_ranges++; +} + +static void fadump_exclude_reserved_area(unsigned long long start, + unsigned long long end) +{ + unsigned long long ra_start, ra_end; + + ra_start = fw_dump.reserve_dump_area_start; + ra_end = ra_start + fw_dump.reserve_dump_area_size; + + if ((ra_start < end) && (ra_end > start)) { + if ((start < ra_start) && (end > ra_end)) { + fadump_add_crash_memory(start, ra_start); + fadump_add_crash_memory(ra_end, end); + } else if (start < ra_start) { + fadump_add_crash_memory(start, ra_start); + } else if (ra_end < end) { + fadump_add_crash_memory(ra_end, end); + } + } else + fadump_add_crash_memory(start, end); +} + +static int fadump_init_elfcore_header(char *bufp) +{ + struct elfhdr *elf; + + elf = (struct elfhdr *) bufp; + bufp += sizeof(struct elfhdr); + memcpy(elf->e_ident, ELFMAG, SELFMAG); + elf->e_ident[EI_CLASS] = ELF_CLASS; + elf->e_ident[EI_DATA] = ELF_DATA; + elf->e_ident[EI_VERSION] = EV_CURRENT; + elf->e_ident[EI_OSABI] = ELF_OSABI; + memset(elf->e_ident+EI_PAD, 0, EI_NIDENT-EI_PAD); + elf->e_type = ET_CORE; + elf->e_machine = ELF_ARCH; + elf->e_version = EV_CURRENT; + elf->e_entry = 0; + elf->e_phoff = sizeof(struct elfhdr); + elf->e_shoff = 0; + elf->e_flags = ELF_CORE_EFLAGS; + elf->e_ehsize = sizeof(struct elfhdr); + elf->e_phentsize = sizeof(struct elf_phdr); + elf->e_phnum = 0; + elf->e_shentsize = 0; + elf->e_shnum = 0; + elf->e_shstrndx = 0; + + return 0; +} + +/* + * Traverse through memblock structure and setup crash memory ranges. These + * ranges will be used create PT_LOAD program headers in elfcore header. + */ +static void fadump_setup_crash_memory_ranges(void) +{ + struct memblock_region *reg; + unsigned long long start, end; + + pr_debug("Setup crash memory ranges.\n"); + crash_mem_ranges = 0; + /* + * add the first memory chunk (RMA_START through boot_memory_size) as + * a separate memory chunk. The reason is, at the time crash firmware + * will move the content of this memory chunk to different location + * specified during fadump registration. We need to create a separate + * program header for this chunk with the correct offset. + */ + fadump_add_crash_memory(RMA_START, fw_dump.boot_memory_size); + + for_each_memblock(memory, reg) { + start = (unsigned long long)reg->base; + end = start + (unsigned long long)reg->size; + if (start == RMA_START && end >= fw_dump.boot_memory_size) + start = fw_dump.boot_memory_size; + + /* add this range excluding the reserved dump area. */ + fadump_exclude_reserved_area(start, end); + } +} + +/* + * If the given physical address falls within the boot memory region then + * return the relocated address that points to the dump region reserved + * for saving initial boot memory contents. + */ +static inline unsigned long fadump_relocate(unsigned long paddr) +{ + if (paddr > RMA_START && paddr < fw_dump.boot_memory_size) + return fdm.rmr_region.destination_address + paddr; + else + return paddr; +} + +static int fadump_create_elfcore_headers(char *bufp) +{ + struct elfhdr *elf; + struct elf_phdr *phdr; + int i; + + fadump_init_elfcore_header(bufp); + elf = (struct elfhdr *)bufp; + bufp += sizeof(struct elfhdr); + + /* + * setup ELF PT_NOTE, place holder for cpu notes info. The notes info + * will be populated during second kernel boot after crash. Hence + * this PT_NOTE will always be the first elf note. + * + * NOTE: Any new ELF note addition should be placed after this note. + */ + phdr = (struct elf_phdr *)bufp; + bufp += sizeof(struct elf_phdr); + phdr->p_type = PT_NOTE; + phdr->p_flags = 0; + phdr->p_vaddr = 0; + phdr->p_align = 0; + + phdr->p_offset = 0; + phdr->p_paddr = 0; + phdr->p_filesz = 0; + phdr->p_memsz = 0; + + (elf->e_phnum)++; + + /* setup ELF PT_NOTE for vmcoreinfo */ + phdr = (struct elf_phdr *)bufp; + bufp += sizeof(struct elf_phdr); + phdr->p_type = PT_NOTE; + phdr->p_flags = 0; + phdr->p_vaddr = 0; + phdr->p_align = 0; + + phdr->p_paddr = fadump_relocate(paddr_vmcoreinfo_note()); + phdr->p_offset = phdr->p_paddr; + phdr->p_memsz = vmcoreinfo_max_size; + phdr->p_filesz = vmcoreinfo_max_size; + + /* Increment number of program headers. */ + (elf->e_phnum)++; + + /* setup PT_LOAD sections. */ + + for (i = 0; i < crash_mem_ranges; i++) { + unsigned long long mbase, msize; + mbase = crash_memory_ranges[i].base; + msize = crash_memory_ranges[i].size; + + if (!msize) + continue; + + phdr = (struct elf_phdr *)bufp; + bufp += sizeof(struct elf_phdr); + phdr->p_type = PT_LOAD; + phdr->p_flags = PF_R|PF_W|PF_X; + phdr->p_offset = mbase; + + if (mbase == RMA_START) { + /* + * The entire RMA region will be moved by firmware + * to the specified destination_address. Hence set + * the correct offset. + */ + phdr->p_offset = fdm.rmr_region.destination_address; + } + + phdr->p_paddr = mbase; + phdr->p_vaddr = (unsigned long)__va(mbase); + phdr->p_filesz = msize; + phdr->p_memsz = msize; + phdr->p_align = 0; + + /* Increment number of program headers. */ + (elf->e_phnum)++; + } + return 0; +} + +static unsigned long init_fadump_header(unsigned long addr) +{ + struct fadump_crash_info_header *fdh; + + if (!addr) + return 0; + + fw_dump.fadumphdr_addr = addr; + fdh = __va(addr); + addr += sizeof(struct fadump_crash_info_header); + + memset(fdh, 0, sizeof(struct fadump_crash_info_header)); + fdh->magic_number = FADUMP_CRASH_INFO_MAGIC; + fdh->elfcorehdr_addr = addr; + /* We will set the crashing cpu id in crash_fadump() during crash. */ + fdh->crashing_cpu = CPU_UNKNOWN; + + return addr; +} + +static void register_fadump(void) +{ + unsigned long addr; + void *vaddr; + + /* + * If no memory is reserved then we can not register for firmware- + * assisted dump. + */ + if (!fw_dump.reserve_dump_area_size) + return; + + fadump_setup_crash_memory_ranges(); + + addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len; + /* Initialize fadump crash info header. */ + addr = init_fadump_header(addr); + vaddr = __va(addr); + + pr_debug("Creating ELF core headers at %#016lx\n", addr); + fadump_create_elfcore_headers(vaddr); + + /* register the future kernel dump with firmware. */ + register_fw_dump(&fdm); +} + +static int fadump_unregister_dump(struct fadump_mem_struct *fdm) +{ + int rc = 0; + unsigned int wait_time; + + pr_debug("Un-register firmware-assisted dump\n"); + + /* TODO: Add upper time limit for the delay */ + do { + rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL, + FADUMP_UNREGISTER, fdm, + sizeof(struct fadump_mem_struct)); + + wait_time = rtas_busy_delay_time(rc); + if (wait_time) + mdelay(wait_time); + } while (wait_time); + + if (rc) { + printk(KERN_ERR "Failed to un-register firmware-assisted dump." + " unexpected error(%d).\n", rc); + return rc; + } + fw_dump.dump_registered = 0; + return 0; +} + +static int fadump_invalidate_dump(struct fadump_mem_struct *fdm) +{ + int rc = 0; + unsigned int wait_time; + + pr_debug("Invalidating firmware-assisted dump registration\n"); + + /* TODO: Add upper time limit for the delay */ + do { + rc = rtas_call(fw_dump.ibm_configure_kernel_dump, 3, 1, NULL, + FADUMP_INVALIDATE, fdm, + sizeof(struct fadump_mem_struct)); + + wait_time = rtas_busy_delay_time(rc); + if (wait_time) + mdelay(wait_time); + } while (wait_time); + + if (rc) { + printk(KERN_ERR "Failed to invalidate firmware-assisted dump " + "rgistration. unexpected error(%d).\n", rc); + return rc; + } + fw_dump.dump_active = 0; + fdm_active = NULL; + return 0; +} + +void fadump_cleanup(void) +{ + /* Invalidate the registration only if dump is active. */ + if (fw_dump.dump_active) { + init_fadump_mem_struct(&fdm, + fdm_active->cpu_state_data.destination_address); + fadump_invalidate_dump(&fdm); + } +} + +/* + * Release the memory that was reserved in early boot to preserve the memory + * contents. The released memory will be available for general use. + */ +static void fadump_release_memory(unsigned long begin, unsigned long end) +{ + unsigned long addr; + unsigned long ra_start, ra_end; + + ra_start = fw_dump.reserve_dump_area_start; + ra_end = ra_start + fw_dump.reserve_dump_area_size; + + for (addr = begin; addr < end; addr += PAGE_SIZE) { + /* + * exclude the dump reserve area. Will reuse it for next + * fadump registration. + */ + if (addr <= ra_end && ((addr + PAGE_SIZE) > ra_start)) + continue; + + ClearPageReserved(pfn_to_page(addr >> PAGE_SHIFT)); + init_page_count(pfn_to_page(addr >> PAGE_SHIFT)); + free_page((unsigned long)__va(addr)); + totalram_pages++; + } +} + +static void fadump_invalidate_release_mem(void) +{ + unsigned long reserved_area_start, reserved_area_end; + unsigned long destination_address; + + mutex_lock(&fadump_mutex); + if (!fw_dump.dump_active) { + mutex_unlock(&fadump_mutex); + return; + } + + destination_address = fdm_active->cpu_state_data.destination_address; + fadump_cleanup(); + mutex_unlock(&fadump_mutex); + + /* + * Save the current reserved memory bounds we will require them + * later for releasing the memory for general use. + */ + reserved_area_start = fw_dump.reserve_dump_area_start; + reserved_area_end = reserved_area_start + + fw_dump.reserve_dump_area_size; + /* + * Setup reserve_dump_area_start and its size so that we can + * reuse this reserved memory for Re-registration. + */ + fw_dump.reserve_dump_area_start = destination_address; + fw_dump.reserve_dump_area_size = get_fadump_area_size(); + + fadump_release_memory(reserved_area_start, reserved_area_end); + if (fw_dump.cpu_notes_buf) { + fadump_cpu_notes_buf_free( + (unsigned long)__va(fw_dump.cpu_notes_buf), + fw_dump.cpu_notes_buf_size); + fw_dump.cpu_notes_buf = 0; + fw_dump.cpu_notes_buf_size = 0; + } + /* Initialize the kernel dump memory structure for FAD registration. */ + init_fadump_mem_struct(&fdm, fw_dump.reserve_dump_area_start); +} + +static ssize_t fadump_release_memory_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + if (!fw_dump.dump_active) + return -EPERM; + + if (buf[0] == '1') { + /* + * Take away the '/proc/vmcore'. We are releasing the dump + * memory, hence it will not be valid anymore. + */ + vmcore_cleanup(); + fadump_invalidate_release_mem(); + + } else + return -EINVAL; + return count; +} + +static ssize_t fadump_enabled_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", fw_dump.fadump_enabled); +} + +static ssize_t fadump_register_show(struct kobject *kobj, + struct kobj_attribute *attr, + char *buf) +{ + return sprintf(buf, "%d\n", fw_dump.dump_registered); +} + +static ssize_t fadump_register_store(struct kobject *kobj, + struct kobj_attribute *attr, + const char *buf, size_t count) +{ + int ret = 0; + + if (!fw_dump.fadump_enabled || fdm_active) + return -EPERM; + + mutex_lock(&fadump_mutex); + + switch (buf[0]) { + case '0': + if (fw_dump.dump_registered == 0) { + ret = -EINVAL; + goto unlock_out; + } + /* Un-register Firmware-assisted dump */ + fadump_unregister_dump(&fdm); + break; + case '1': + if (fw_dump.dump_registered == 1) { + ret = -EINVAL; + goto unlock_out; + } + /* Register Firmware-assisted dump */ + register_fadump(); + break; + default: + ret = -EINVAL; + break; + } + +unlock_out: + mutex_unlock(&fadump_mutex); + return ret < 0 ? ret : count; +} + +static int fadump_region_show(struct seq_file *m, void *private) +{ + const struct fadump_mem_struct *fdm_ptr; + + if (!fw_dump.fadump_enabled) + return 0; + + mutex_lock(&fadump_mutex); + if (fdm_active) + fdm_ptr = fdm_active; + else { + mutex_unlock(&fadump_mutex); + fdm_ptr = &fdm; + } + + seq_printf(m, + "CPU : [%#016llx-%#016llx] %#llx bytes, " + "Dumped: %#llx\n", + fdm_ptr->cpu_state_data.destination_address, + fdm_ptr->cpu_state_data.destination_address + + fdm_ptr->cpu_state_data.source_len - 1, + fdm_ptr->cpu_state_data.source_len, + fdm_ptr->cpu_state_data.bytes_dumped); + seq_printf(m, + "HPTE: [%#016llx-%#016llx] %#llx bytes, " + "Dumped: %#llx\n", + fdm_ptr->hpte_region.destination_address, + fdm_ptr->hpte_region.destination_address + + fdm_ptr->hpte_region.source_len - 1, + fdm_ptr->hpte_region.source_len, + fdm_ptr->hpte_region.bytes_dumped); + seq_printf(m, + "DUMP: [%#016llx-%#016llx] %#llx bytes, " + "Dumped: %#llx\n", + fdm_ptr->rmr_region.destination_address, + fdm_ptr->rmr_region.destination_address + + fdm_ptr->rmr_region.source_len - 1, + fdm_ptr->rmr_region.source_len, + fdm_ptr->rmr_region.bytes_dumped); + + if (!fdm_active || + (fw_dump.reserve_dump_area_start == + fdm_ptr->cpu_state_data.destination_address)) + goto out; + + /* Dump is active. Show reserved memory region. */ + seq_printf(m, + " : [%#016llx-%#016llx] %#llx bytes, " + "Dumped: %#llx\n", + (unsigned long long)fw_dump.reserve_dump_area_start, + fdm_ptr->cpu_state_data.destination_address - 1, + fdm_ptr->cpu_state_data.destination_address - + fw_dump.reserve_dump_area_start, + fdm_ptr->cpu_state_data.destination_address - + fw_dump.reserve_dump_area_start); +out: + if (fdm_active) + mutex_unlock(&fadump_mutex); + return 0; +} + +static struct kobj_attribute fadump_release_attr = __ATTR(fadump_release_mem, + 0200, NULL, + fadump_release_memory_store); +static struct kobj_attribute fadump_attr = __ATTR(fadump_enabled, + 0444, fadump_enabled_show, + NULL); +static struct kobj_attribute fadump_register_attr = __ATTR(fadump_registered, + 0644, fadump_register_show, + fadump_register_store); + +static int fadump_region_open(struct inode *inode, struct file *file) +{ + return single_open(file, fadump_region_show, inode->i_private); +} + +static const struct file_operations fadump_region_fops = { + .open = fadump_region_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static void fadump_init_files(void) +{ + struct dentry *debugfs_file; + int rc = 0; + + rc = sysfs_create_file(kernel_kobj, &fadump_attr.attr); + if (rc) + printk(KERN_ERR "fadump: unable to create sysfs file" + " fadump_enabled (%d)\n", rc); + + rc = sysfs_create_file(kernel_kobj, &fadump_register_attr.attr); + if (rc) + printk(KERN_ERR "fadump: unable to create sysfs file" + " fadump_registered (%d)\n", rc); + + debugfs_file = debugfs_create_file("fadump_region", 0444, + powerpc_debugfs_root, NULL, + &fadump_region_fops); + if (!debugfs_file) + printk(KERN_ERR "fadump: unable to create debugfs file" + " fadump_region\n"); + + if (fw_dump.dump_active) { + rc = sysfs_create_file(kernel_kobj, &fadump_release_attr.attr); + if (rc) + printk(KERN_ERR "fadump: unable to create sysfs file" + " fadump_release_mem (%d)\n", rc); + } + return; +} + +/* + * Prepare for firmware-assisted dump. + */ +int __init setup_fadump(void) +{ + if (!fw_dump.fadump_enabled) + return 0; + + if (!fw_dump.fadump_supported) { + printk(KERN_ERR "Firmware-assisted dump is not supported on" + " this hardware\n"); + return 0; + } + + fadump_show_config(); + /* + * If dump data is available then see if it is valid and prepare for + * saving it to the disk. + */ + if (fw_dump.dump_active) { + /* + * if dump process fails then invalidate the registration + * and release memory before proceeding for re-registration. + */ + if (process_fadump(fdm_active) < 0) + fadump_invalidate_release_mem(); + } + /* Initialize the kernel dump memory structure for FAD registration. */ + else if (fw_dump.reserve_dump_area_size) + init_fadump_mem_struct(&fdm, fw_dump.reserve_dump_area_start); + fadump_init_files(); + + return 1; +} +subsys_initcall(setup_fadump); diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index 0654dba2c1f..dc0488b6f6e 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -395,7 +395,7 @@ DataAccess: bl hash_page 1: lwz r5,_DSISR(r11) /* get DSISR value */ mfspr r4,SPRN_DAR - EXC_XFER_EE_LITE(0x300, handle_page_fault) + EXC_XFER_LITE(0x300, handle_page_fault) /* Instruction access exception. */ @@ -410,7 +410,7 @@ InstructionAccess: bl hash_page 1: mr r4,r12 mr r5,r9 - EXC_XFER_EE_LITE(0x400, handle_page_fault) + EXC_XFER_LITE(0x400, handle_page_fault) /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) diff --git a/arch/powerpc/kernel/head_40x.S b/arch/powerpc/kernel/head_40x.S index 872a6af83ba..4989661b710 100644 --- a/arch/powerpc/kernel/head_40x.S +++ b/arch/powerpc/kernel/head_40x.S @@ -394,7 +394,7 @@ label: NORMAL_EXCEPTION_PROLOG mr r4,r12 /* Pass SRR0 as arg2 */ li r5,0 /* Pass zero as arg3 */ - EXC_XFER_EE_LITE(0x400, handle_page_fault) + EXC_XFER_LITE(0x400, handle_page_fault) /* 0x0500 - External Interrupt Exception */ EXCEPTION(0x0500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) @@ -747,7 +747,7 @@ DataAccess: mfspr r5,SPRN_ESR /* Grab the ESR, save it, pass arg3 */ stw r5,_ESR(r11) mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ - EXC_XFER_EE_LITE(0x300, handle_page_fault) + EXC_XFER_LITE(0x300, handle_page_fault) /* Other PowerPC processors, namely those derived from the 6xx-series * have vectors from 0x2100 through 0x2F00 defined, but marked as reserved. diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 06c7251c1bf..58bddee8e1e 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -32,13 +32,13 @@ #include <asm/cputable.h> #include <asm/setup.h> #include <asm/hvcall.h> -#include <asm/iseries/lpar_map.h> #include <asm/thread_info.h> #include <asm/firmware.h> #include <asm/page_64.h> #include <asm/irqflags.h> #include <asm/kvm_book3s_asm.h> #include <asm/ptrace.h> +#include <asm/hw_irq.h> /* The physical memory is laid out such that the secondary processor * spin code sits at 0x0000...0x00ff. On server, the vectors follow @@ -57,10 +57,6 @@ * entry in r9 for debugging purposes * 2. Secondary processors enter at 0x60 with PIR in gpr3 * - * For iSeries: - * 1. The MMU is on (as it always is for iSeries) - * 2. The kernel is entered at system_reset_iSeries - * * For Book3E processors: * 1. The MMU is on running in AS0 in a state defined in ePAPR * 2. The kernel is entered at __start @@ -93,15 +89,6 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .llong 0x0 -#ifdef CONFIG_PPC_ISERIES - /* - * At offset 0x20, there is a pointer to iSeries LPAR data. - * This is required by the hypervisor - */ - . = 0x20 - .llong hvReleaseData-KERNELBASE -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_RELOCATABLE /* This flag is set to 1 by a loader if the kernel should run * at the loaded address instead of the linked address. This @@ -564,7 +551,8 @@ _GLOBAL(pmac_secondary_start) */ li r0,0 stb r0,PACASOFTIRQEN(r13) - stb r0,PACAHARDIRQEN(r13) + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) /* Create a temp kernel stack for use before relocation is on. */ ld r1,PACAEMERGSP(r13) @@ -582,7 +570,7 @@ _GLOBAL(pmac_secondary_start) * 1. Processor number * 2. Segment table pointer (virtual address) * On entry the following are set: - * r1 = stack pointer. vaddr for iSeries, raddr (temp stack) for pSeries + * r1 = stack pointer (real addr of temp stack) * r24 = cpu# (in Linux terms) * r13 = paca virtual address * SPRG_PACA = paca virtual address @@ -595,7 +583,7 @@ __secondary_start: /* Set thread priority to MEDIUM */ HMT_MEDIUM - /* Initialize the kernel stack. Just a repeat for iSeries. */ + /* Initialize the kernel stack */ LOAD_REG_ADDR(r3, current_set) sldi r28,r24,3 /* get current_set[cpu#] */ ldx r14,r3,r28 @@ -615,20 +603,16 @@ __secondary_start: li r7,0 mtlr r7 + /* Mark interrupts soft and hard disabled (they might be enabled + * in the PACA when doing hotplug) + */ + stb r7,PACASOFTIRQEN(r13) + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) + /* enable MMU and jump to start_secondary */ LOAD_REG_ADDR(r3, .start_secondary_prolog) LOAD_REG_IMMEDIATE(r4, MSR_KERNEL) -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - ori r4,r4,MSR_EE - li r8,1 - stb r8,PACAHARDIRQEN(r13) -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif -BEGIN_FW_FTR_SECTION - stb r7,PACAHARDIRQEN(r13) -END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) - stb r7,PACASOFTIRQEN(r13) mtspr SPRN_SRR0,r3 mtspr SPRN_SRR1,r4 @@ -771,22 +755,18 @@ _INIT_GLOBAL(start_here_common) /* Load the TOC (virtual address) */ ld r2,PACATOC(r13) + /* Do more system initializations in virtual mode */ bl .setup_system - /* Load up the kernel context */ -5: - li r5,0 - stb r5,PACASOFTIRQEN(r13) /* Soft Disabled */ -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - mfmsr r5 - ori r5,r5,MSR_EE /* Hard Enabled on iSeries*/ - mtmsrd r5 - li r5,1 -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif - stb r5,PACAHARDIRQEN(r13) /* Hard Disabled on others */ + /* Mark interrupts soft and hard disabled (they might be enabled + * in the PACA when doing hotplug) + */ + li r0,0 + stb r0,PACASOFTIRQEN(r13) + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) + /* Generic kernel entry */ bl .start_kernel /* Not reached */ diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S index b68cb173ba2..b2a5860accf 100644 --- a/arch/powerpc/kernel/head_8xx.S +++ b/arch/powerpc/kernel/head_8xx.S @@ -220,7 +220,7 @@ DataAccess: mfspr r4,SPRN_DAR li r10,0x00f0 mtspr SPRN_DAR,r10 /* Tag DAR, to be used in DTLB Error */ - EXC_XFER_EE_LITE(0x300, handle_page_fault) + EXC_XFER_LITE(0x300, handle_page_fault) /* Instruction access exception. * This is "never generated" by the MPC8xx. We jump to it for other @@ -231,7 +231,7 @@ InstructionAccess: EXCEPTION_PROLOG mr r4,r12 mr r5,r9 - EXC_XFER_EE_LITE(0x400, handle_page_fault) + EXC_XFER_LITE(0x400, handle_page_fault) /* External interrupt */ EXCEPTION(0x500, HardwareInterrupt, do_IRQ, EXC_XFER_LITE) diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index fc921bf62e1..0e4175388f4 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -359,7 +359,7 @@ label: mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \ stw r5,_ESR(r11); \ mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \ - EXC_XFER_EE_LITE(0x0300, handle_page_fault) + EXC_XFER_LITE(0x0300, handle_page_fault) #define INSTRUCTION_STORAGE_EXCEPTION \ START_EXCEPTION(InstructionStorage) \ @@ -368,7 +368,7 @@ label: stw r5,_ESR(r11); \ mr r4,r12; /* Pass SRR0 as arg2 */ \ li r5,0; /* Pass zero as arg3 */ \ - EXC_XFER_EE_LITE(0x0400, handle_page_fault) + EXC_XFER_LITE(0x0400, handle_page_fault) #define ALIGNMENT_EXCEPTION \ START_EXCEPTION(Alignment) \ diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index d5d78c4ceef..28e62598d0e 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -319,7 +319,7 @@ interrupt_base: mfspr r4,SPRN_DEAR /* Grab the DEAR, save it, pass arg2 */ andis. r10,r5,(ESR_ILK|ESR_DLK)@h bne 1f - EXC_XFER_EE_LITE(0x0300, handle_page_fault) + EXC_XFER_LITE(0x0300, handle_page_fault) 1: addi r3,r1,STACK_FRAME_OVERHEAD EXC_XFER_EE_LITE(0x0300, CacheLockingException) diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index c97fc60c790..e8e821146f3 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -84,7 +84,11 @@ void cpu_idle(void) start_critical_timings(); - local_irq_enable(); + /* Some power_save functions return with + * interrupts enabled, some don't. + */ + if (irqs_disabled()) + local_irq_enable(); set_thread_flag(TIF_POLLING_NRFLAG); } else { diff --git a/arch/powerpc/kernel/idle_book3e.S b/arch/powerpc/kernel/idle_book3e.S index 16c002d6bdf..ff007b59448 100644 --- a/arch/powerpc/kernel/idle_book3e.S +++ b/arch/powerpc/kernel/idle_book3e.S @@ -29,43 +29,30 @@ _GLOBAL(book3e_idle) wrteei 0 /* Now check if an interrupt came in while we were soft disabled - * since we may otherwise lose it (doorbells etc...). We know - * that since PACAHARDIRQEN will have been cleared in that case. + * since we may otherwise lose it (doorbells etc...). */ - lbz r3,PACAHARDIRQEN(r13) + lbz r3,PACAIRQHAPPENED(r13) cmpwi cr0,r3,0 - beqlr + bnelr - /* Now we are going to mark ourselves as soft and hard enables in + /* Now we are going to mark ourselves as soft and hard enabled in * order to be able to take interrupts while asleep. We inform lockdep * of that. We don't actually turn interrupts on just yet tho. */ #ifdef CONFIG_TRACE_IRQFLAGS stdu r1,-128(r1) bl .trace_hardirqs_on + addi r1,r1,128 #endif li r0,1 stb r0,PACASOFTIRQEN(r13) - stb r0,PACAHARDIRQEN(r13) /* Interrupts will make use return to LR, so get something we want * in there */ bl 1f - /* Hard disable interrupts again */ - wrteei 0 - - /* Mark them off again in the PACA as well */ - li r0,0 - stb r0,PACASOFTIRQEN(r13) - stb r0,PACAHARDIRQEN(r13) - - /* Tell lockdep about it */ -#ifdef CONFIG_TRACE_IRQFLAGS - bl .trace_hardirqs_off - addi r1,r1,128 -#endif + /* And return (interrupts are on) */ ld r0,16(r1) mtlr r0 blr diff --git a/arch/powerpc/kernel/idle_power4.S b/arch/powerpc/kernel/idle_power4.S index ba319547860..2c71b0fc9f9 100644 --- a/arch/powerpc/kernel/idle_power4.S +++ b/arch/powerpc/kernel/idle_power4.S @@ -14,6 +14,7 @@ #include <asm/thread_info.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> +#include <asm/irqflags.h> #undef DEBUG @@ -29,14 +30,31 @@ END_FTR_SECTION_IFCLR(CPU_FTR_CAN_NAP) cmpwi 0,r4,0 beqlr - /* Go to NAP now */ + /* Hard disable interrupts */ mfmsr r7 rldicl r0,r7,48,1 rotldi r0,r0,16 - mtmsrd r0,1 /* hard-disable interrupts */ + mtmsrd r0,1 + + /* Check if something happened while soft-disabled */ + lbz r0,PACAIRQHAPPENED(r13) + cmpwi cr0,r0,0 + bnelr + + /* Soft-enable interrupts */ +#ifdef CONFIG_TRACE_IRQFLAGS + mflr r0 + std r0,16(r1) + stdu r1,-128(r1) + bl .trace_hardirqs_on + addi r1,r1,128 + ld r0,16(r1) + mtlr r0 + mfmsr r7 +#endif /* CONFIG_TRACE_IRQFLAGS */ + li r0,1 stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */ - stb r0,PACAHARDIRQEN(r13) BEGIN_FTR_SECTION DSSALL sync diff --git a/arch/powerpc/kernel/idle_power7.S b/arch/powerpc/kernel/idle_power7.S index fcdff198da4..0cdc9a39283 100644 --- a/arch/powerpc/kernel/idle_power7.S +++ b/arch/powerpc/kernel/idle_power7.S @@ -1,5 +1,5 @@ /* - * This file contains the power_save function for 970-family CPUs. + * This file contains the power_save function for Power7 CPUs. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -15,6 +15,7 @@ #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/ppc-opcode.h> +#include <asm/hw_irq.h> #undef DEBUG @@ -51,9 +52,25 @@ _GLOBAL(power7_idle) rldicl r9,r9,48,1 rotldi r9,r9,16 mtmsrd r9,1 /* hard-disable interrupts */ + + /* Check if something happened while soft-disabled */ + lbz r0,PACAIRQHAPPENED(r13) + cmpwi cr0,r0,0 + beq 1f + addi r1,r1,INT_FRAME_SIZE + ld r0,16(r1) + mtlr r0 + blr + +1: /* We mark irqs hard disabled as this is the state we'll + * be in when returning and we need to tell arch_local_irq_restore() + * about it + */ + li r0,PACA_IRQ_HARD_DIS + stb r0,PACAIRQHAPPENED(r13) + + /* We haven't lost state ... yet */ li r0,0 - stb r0,PACASOFTIRQEN(r13) /* we'll hard-enable shortly */ - stb r0,PACAHARDIRQEN(r13) stb r0,PACA_NAPSTATELOST(r13) /* Continue saving state */ diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index 0cfcf98aafc..359f078571c 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -39,6 +39,7 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/kdump.h> +#include <asm/fadump.h> #define DBG(...) @@ -445,7 +446,12 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, static void iommu_table_clear(struct iommu_table *tbl) { - if (!is_kdump_kernel()) { + /* + * In case of firmware assisted dump system goes through clean + * reboot process at the time of system crash. Hence it's safe to + * clear the TCE entries if firmware assisted dump is active. + */ + if (!is_kdump_kernel() || is_fadump_active()) { /* Clear the table in case firmware left allocations in it */ ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); return; diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index bdfb3eee3e6..a3d128e94cf 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -93,20 +93,16 @@ extern int tau_interrupts(int); #ifdef CONFIG_PPC64 -#ifndef CONFIG_SPARSE_IRQ -EXPORT_SYMBOL(irq_desc); -#endif - int distribute_irqs = 1; -static inline notrace unsigned long get_hard_enabled(void) +static inline notrace unsigned long get_irq_happened(void) { - unsigned long enabled; + unsigned long happened; __asm__ __volatile__("lbz %0,%1(13)" - : "=r" (enabled) : "i" (offsetof(struct paca_struct, hard_enabled))); + : "=r" (happened) : "i" (offsetof(struct paca_struct, irq_happened))); - return enabled; + return happened; } static inline notrace void set_soft_enabled(unsigned long enable) @@ -115,88 +111,162 @@ static inline notrace void set_soft_enabled(unsigned long enable) : : "r" (enable), "i" (offsetof(struct paca_struct, soft_enabled))); } -static inline notrace void decrementer_check_overflow(void) +static inline notrace int decrementer_check_overflow(void) { - u64 now = get_tb_or_rtc(); - u64 *next_tb; - - preempt_disable(); - next_tb = &__get_cpu_var(decrementers_next_tb); - + u64 now = get_tb_or_rtc(); + u64 *next_tb = &__get_cpu_var(decrementers_next_tb); + if (now >= *next_tb) set_dec(1); - preempt_enable(); + return now >= *next_tb; } -notrace void arch_local_irq_restore(unsigned long en) +/* This is called whenever we are re-enabling interrupts + * and returns either 0 (nothing to do) or 500/900 if there's + * either an EE or a DEC to generate. + * + * This is called in two contexts: From arch_local_irq_restore() + * before soft-enabling interrupts, and from the exception exit + * path when returning from an interrupt from a soft-disabled to + * a soft enabled context. In both case we have interrupts hard + * disabled. + * + * We take care of only clearing the bits we handled in the + * PACA irq_happened field since we can only re-emit one at a + * time and we don't want to "lose" one. + */ +notrace unsigned int __check_irq_replay(void) { /* - * get_paca()->soft_enabled = en; - * Is it ever valid to use local_irq_restore(0) when soft_enabled is 1? - * That was allowed before, and in such a case we do need to take care - * that gcc will set soft_enabled directly via r13, not choose to use - * an intermediate register, lest we're preempted to a different cpu. + * We use local_paca rather than get_paca() to avoid all + * the debug_smp_processor_id() business in this low level + * function */ - set_soft_enabled(en); - if (!en) - return; + unsigned char happened = local_paca->irq_happened; -#ifdef CONFIG_PPC_STD_MMU_64 - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - /* - * Do we need to disable preemption here? Not really: in the - * unlikely event that we're preempted to a different cpu in - * between getting r13, loading its lppaca_ptr, and loading - * its any_int, we might call iseries_handle_interrupts without - * an interrupt pending on the new cpu, but that's no disaster, - * is it? And the business of preempting us off the old cpu - * would itself involve a local_irq_restore which handles the - * interrupt to that cpu. - * - * But use "local_paca->lppaca_ptr" instead of "get_lppaca()" - * to avoid any preemption checking added into get_paca(). - */ - if (local_paca->lppaca_ptr->int_dword.any_int) - iseries_handle_interrupts(); + /* Clear bit 0 which we wouldn't clear otherwise */ + local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; + + /* + * Force the delivery of pending soft-disabled interrupts on PS3. + * Any HV call will have this side effect. + */ + if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { + u64 tmp, tmp2; + lv1_get_version_info(&tmp, &tmp2); } -#endif /* CONFIG_PPC_STD_MMU_64 */ /* - * if (get_paca()->hard_enabled) return; - * But again we need to take care that gcc gets hard_enabled directly - * via r13, not choose to use an intermediate register, lest we're - * preempted to a different cpu in between the two instructions. + * We may have missed a decrementer interrupt. We check the + * decrementer itself rather than the paca irq_happened field + * in case we also had a rollover while hard disabled + */ + local_paca->irq_happened &= ~PACA_IRQ_DEC; + if (decrementer_check_overflow()) + return 0x900; + + /* Finally check if an external interrupt happened */ + local_paca->irq_happened &= ~PACA_IRQ_EE; + if (happened & PACA_IRQ_EE) + return 0x500; + +#ifdef CONFIG_PPC_BOOK3E + /* Finally check if an EPR external interrupt happened + * this bit is typically set if we need to handle another + * "edge" interrupt from within the MPIC "EPR" handler */ - if (get_hard_enabled()) + local_paca->irq_happened &= ~PACA_IRQ_EE_EDGE; + if (happened & PACA_IRQ_EE_EDGE) + return 0x500; + + local_paca->irq_happened &= ~PACA_IRQ_DBELL; + if (happened & PACA_IRQ_DBELL) + return 0x280; +#endif /* CONFIG_PPC_BOOK3E */ + + /* There should be nothing left ! */ + BUG_ON(local_paca->irq_happened != 0); + + return 0; +} + +notrace void arch_local_irq_restore(unsigned long en) +{ + unsigned char irq_happened; + unsigned int replay; + + /* Write the new soft-enabled value */ + set_soft_enabled(en); + if (!en) + return; + /* + * From this point onward, we can take interrupts, preempt, + * etc... unless we got hard-disabled. We check if an event + * happened. If none happened, we know we can just return. + * + * We may have preempted before the check below, in which case + * we are checking the "new" CPU instead of the old one. This + * is only a problem if an event happened on the "old" CPU. + * + * External interrupt events on non-iseries will have caused + * interrupts to be hard-disabled, so there is no problem, we + * cannot have preempted. + */ + irq_happened = get_irq_happened(); + if (!irq_happened) return; /* - * Need to hard-enable interrupts here. Since currently disabled, - * no need to take further asm precautions against preemption; but - * use local_paca instead of get_paca() to avoid preemption checking. + * We need to hard disable to get a trusted value from + * __check_irq_replay(). We also need to soft-disable + * again to avoid warnings in there due to the use of + * per-cpu variables. + * + * We know that if the value in irq_happened is exactly 0x01 + * then we are already hard disabled (there are other less + * common cases that we'll ignore for now), so we skip the + * (expensive) mtmsrd. */ - local_paca->hard_enabled = en; + if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) + __hard_irq_disable(); + set_soft_enabled(0); /* - * Trigger the decrementer if we have a pending event. Some processors - * only trigger on edge transitions of the sign bit. We might also - * have disabled interrupts long enough that the decrementer wrapped - * to positive. + * Check if anything needs to be re-emitted. We haven't + * soft-enabled yet to avoid warnings in decrementer_check_overflow + * accessing per-cpu variables */ - decrementer_check_overflow(); + replay = __check_irq_replay(); + + /* We can soft-enable now */ + set_soft_enabled(1); /* - * Force the delivery of pending soft-disabled interrupts on PS3. - * Any HV call will have this side effect. + * And replay if we have to. This will return with interrupts + * hard-enabled. */ - if (firmware_has_feature(FW_FEATURE_PS3_LV1)) { - u64 tmp, tmp2; - lv1_get_version_info(&tmp, &tmp2); + if (replay) { + __replay_interrupt(replay); + return; } + /* Finally, let's ensure we are hard enabled */ __hard_irq_enable(); } EXPORT_SYMBOL(arch_local_irq_restore); + +/* + * This is specifically called by assembly code to re-enable interrupts + * if they are currently disabled. This is typically called before + * schedule() or do_signal() when returning to userspace. We do it + * in C to avoid the burden of dealing with lockdep etc... + */ +void restore_interrupts(void) +{ + if (irqs_disabled()) + local_irq_enable(); +} + #endif /* CONFIG_PPC64 */ int arch_show_interrupts(struct seq_file *p, int prec) @@ -364,8 +434,17 @@ void do_IRQ(struct pt_regs *regs) check_stack_overflow(); + /* + * Query the platform PIC for the interrupt & ack it. + * + * This will typically lower the interrupt line to the CPU + */ irq = ppc_md.get_irq(); + /* We can hard enable interrupts now */ + may_hard_irq_enable(); + + /* And finally process it */ if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) handle_one_irq(irq); else if (irq != NO_IRQ_IGNORE) @@ -374,15 +453,6 @@ void do_IRQ(struct pt_regs *regs) irq_exit(); set_irq_regs(old_regs); -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES) && - get_lppaca()->int_dword.fields.decr_int) { - get_lppaca()->int_dword.fields.decr_int = 0; - /* Signal a fake decrementer interrupt */ - timer_interrupt(regs); - } -#endif - trace_irq_exit(regs); } diff --git a/arch/powerpc/kernel/isa-bridge.c b/arch/powerpc/kernel/isa-bridge.c index 479752901ec..d45ec58703c 100644 --- a/arch/powerpc/kernel/isa-bridge.c +++ b/arch/powerpc/kernel/isa-bridge.c @@ -29,7 +29,6 @@ #include <asm/pci-bridge.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> -#include <asm/firmware.h> unsigned long isa_io_base; /* NULL if no ISA bus */ EXPORT_SYMBOL(isa_io_base); @@ -261,8 +260,6 @@ static struct notifier_block isa_bridge_notifier = { */ static int __init isa_bridge_init(void) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; bus_register_notifier(&pci_bus_type, &isa_bridge_notifier); return 0; } diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 578f35f1872..ac12bd80ad9 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -26,7 +26,6 @@ #include <linux/seq_file.h> #include <linux/slab.h> #include <asm/uaccess.h> -#include <asm/iseries/hv_lp_config.h> #include <asm/lppaca.h> #include <asm/hvcall.h> #include <asm/firmware.h> @@ -55,80 +54,14 @@ static unsigned long get_purr(void) int cpu; for_each_possible_cpu(cpu) { - if (firmware_has_feature(FW_FEATURE_ISERIES)) - sum_purr += lppaca_of(cpu).emulated_time_base; - else { - struct cpu_usage *cu; + struct cpu_usage *cu; - cu = &per_cpu(cpu_usage_array, cpu); - sum_purr += cu->current_tb; - } + cu = &per_cpu(cpu_usage_array, cpu); + sum_purr += cu->current_tb; } return sum_purr; } -#ifdef CONFIG_PPC_ISERIES - -/* - * Methods used to fetch LPAR data when running on an iSeries platform. - */ -static int iseries_lparcfg_data(struct seq_file *m, void *v) -{ - unsigned long pool_id; - int shared, entitled_capacity, max_entitled_capacity; - int processors, max_processors; - unsigned long purr = get_purr(); - - shared = (int)(local_paca->lppaca_ptr->shared_proc); - - seq_printf(m, "system_active_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - seq_printf(m, "system_potential_processors=%d\n", - (int)HvLpConfig_getSystemPhysicalProcessors()); - - processors = (int)HvLpConfig_getPhysicalProcessors(); - seq_printf(m, "partition_active_processors=%d\n", processors); - - max_processors = (int)HvLpConfig_getMaxPhysicalProcessors(); - seq_printf(m, "partition_potential_processors=%d\n", max_processors); - - if (shared) { - entitled_capacity = HvLpConfig_getSharedProcUnits(); - max_entitled_capacity = HvLpConfig_getMaxSharedProcUnits(); - } else { - entitled_capacity = processors * 100; - max_entitled_capacity = max_processors * 100; - } - seq_printf(m, "partition_entitled_capacity=%d\n", entitled_capacity); - - seq_printf(m, "partition_max_entitled_capacity=%d\n", - max_entitled_capacity); - - if (shared) { - pool_id = HvLpConfig_getSharedPoolIndex(); - seq_printf(m, "pool=%d\n", (int)pool_id); - seq_printf(m, "pool_capacity=%d\n", - (int)(HvLpConfig_getNumProcsInSharedPool(pool_id) * - 100)); - seq_printf(m, "purr=%ld\n", purr); - } - - seq_printf(m, "shared_processor_mode=%d\n", shared); - - return 0; -} - -#else /* CONFIG_PPC_ISERIES */ - -static int iseries_lparcfg_data(struct seq_file *m, void *v) -{ - return 0; -} - -#endif /* CONFIG_PPC_ISERIES */ - -#ifdef CONFIG_PPC_PSERIES /* * Methods used to fetch LPAR data when running on a pSeries platform. */ @@ -648,8 +581,7 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, u8 new_weight, *new_weight_ptr = &new_weight; ssize_t retval; - if (!firmware_has_feature(FW_FEATURE_SPLPAR) || - firmware_has_feature(FW_FEATURE_ISERIES)) + if (!firmware_has_feature(FW_FEATURE_SPLPAR)) return -EINVAL; if (count > kbuf_sz) @@ -709,21 +641,6 @@ static ssize_t lparcfg_write(struct file *file, const char __user * buf, return retval; } -#else /* CONFIG_PPC_PSERIES */ - -static int pseries_lparcfg_data(struct seq_file *m, void *v) -{ - return 0; -} - -static ssize_t lparcfg_write(struct file *file, const char __user * buf, - size_t count, loff_t * off) -{ - return -EINVAL; -} - -#endif /* CONFIG_PPC_PSERIES */ - static int lparcfg_data(struct seq_file *m, void *v) { struct device_node *rootdn; @@ -738,19 +655,11 @@ static int lparcfg_data(struct seq_file *m, void *v) rootdn = of_find_node_by_path("/"); if (rootdn) { tmp = of_get_property(rootdn, "model", NULL); - if (tmp) { + if (tmp) model = tmp; - /* Skip "IBM," - see platforms/iseries/dt.c */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - model += 4; - } tmp = of_get_property(rootdn, "system-id", NULL); - if (tmp) { + if (tmp) system_id = tmp; - /* Skip "IBM," - see platforms/iseries/dt.c */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - system_id += 4; - } lp_index_ptr = of_get_property(rootdn, "ibm,partition-no", NULL); if (lp_index_ptr) @@ -761,8 +670,6 @@ static int lparcfg_data(struct seq_file *m, void *v) seq_printf(m, "system_type=%s\n", model); seq_printf(m, "partition_id=%d\n", (int)lp_index); - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return iseries_lparcfg_data(m, v); return pseries_lparcfg_data(m, v); } @@ -786,8 +693,7 @@ static int __init lparcfg_init(void) umode_t mode = S_IRUSR | S_IRGRP | S_IROTH; /* Allow writing if we have FW_FEATURE_SPLPAR */ - if (firmware_has_feature(FW_FEATURE_SPLPAR) && - !firmware_has_feature(FW_FEATURE_ISERIES)) + if (firmware_has_feature(FW_FEATURE_SPLPAR)) mode |= S_IWUSR; ent = proc_create("powerpc/lparcfg", mode, NULL, &lparcfg_fops); diff --git a/arch/powerpc/kernel/misc.S b/arch/powerpc/kernel/misc.S index b69463ec201..ba16874fe29 100644 --- a/arch/powerpc/kernel/misc.S +++ b/arch/powerpc/kernel/misc.S @@ -5,7 +5,6 @@ * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) * and Paul Mackerras. * - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) * * setjmp/longjmp code by Paul Mackerras. diff --git a/arch/powerpc/kernel/of_platform.c b/arch/powerpc/kernel/of_platform.c index e1612dfb4a9..2049f2d00ff 100644 --- a/arch/powerpc/kernel/of_platform.c +++ b/arch/powerpc/kernel/of_platform.c @@ -21,12 +21,13 @@ #include <linux/of.h> #include <linux/of_device.h> #include <linux/of_platform.h> +#include <linux/atomic.h> #include <asm/errno.h> #include <asm/topology.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> -#include <linux/atomic.h> +#include <asm/eeh.h> #ifdef CONFIG_PPC_OF_PLATFORM_PCI @@ -66,6 +67,9 @@ static int __devinit of_pci_phb_probe(struct platform_device *dev) /* Init pci_dn data structures */ pci_devs_phb_init_dynamic(phb); + /* Create EEH devices for the PHB */ + eeh_dev_phb_init_dynamic(phb); + /* Register devices with EEH */ #ifdef CONFIG_EEH if (dev->dev.of_node->child) diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c index 41456ff55e1..0bb1f98613b 100644 --- a/arch/powerpc/kernel/paca.c +++ b/arch/powerpc/kernel/paca.c @@ -11,13 +11,10 @@ #include <linux/export.h> #include <linux/memblock.h> -#include <asm/firmware.h> #include <asm/lppaca.h> #include <asm/paca.h> #include <asm/sections.h> #include <asm/pgtable.h> -#include <asm/iseries/lpar_map.h> -#include <asm/iseries/hv_types.h> #include <asm/kexec.h> /* This symbol is provided by the linker - let it fill in the paca @@ -30,8 +27,8 @@ extern unsigned long __toc_start; * The structure which the hypervisor knows about - this structure * should not cross a page boundary. The vpa_init/register_vpa call * is now known to fail if the lppaca structure crosses a page - * boundary. The lppaca is also used on legacy iSeries and POWER5 - * pSeries boxes. The lppaca is 640 bytes long, and cannot readily + * boundary. The lppaca is also used on POWER5 pSeries boxes. + * The lppaca is 640 bytes long, and cannot readily * change since the hypervisor knows its layout, so a 1kB alignment * will suffice to ensure that it doesn't cross a page boundary. */ @@ -183,12 +180,9 @@ void __init allocate_pacas(void) /* * We can't take SLB misses on the paca, and we want to access them * in real mode, so allocate them within the RMA and also within - * the first segment. On iSeries they must be within the area mapped - * by the HV, which is HvPagesToMap * HVPAGESIZE bytes. + * the first segment. */ limit = min(0x10000000ULL, ppc64_rma_size); - if (firmware_has_feature(FW_FEATURE_ISERIES)) - limit = min(limit, HvPagesToMap * HVPAGESIZE); paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpu_ids); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index cce98d76e90..d0373bcb7c9 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -38,7 +38,6 @@ #include <asm/byteorder.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> -#include <asm/firmware.h> #include <asm/eeh.h> static DEFINE_SPINLOCK(hose_spinlock); @@ -219,20 +218,6 @@ static int pci_read_irq_line(struct pci_dev *pci_dev) struct of_irq oirq; unsigned int virq; - /* The current device-tree that iSeries generates from the HV - * PCI informations doesn't contain proper interrupt routing, - * and all the fallback would do is print out crap, so we - * don't attempt to resolve the interrupts here at all, some - * iSeries specific fixup does it. - * - * In the long run, we will hopefully fix the generated device-tree - * instead. - */ -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return -1; -#endif - pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev)); #ifdef DEBUG diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index d817ab01848..e40707032ac 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -647,6 +647,9 @@ void show_regs(struct pt_regs * regs) printk("MSR: "REG" ", regs->msr); printbits(regs->msr, msr_bits); printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); +#ifdef CONFIG_PPC64 + printk("SOFTE: %ld\n", regs->softe); +#endif trap = TRAP(regs); if ((regs->trap != 0xc00) && cpu_has_feature(CPU_FTR_CFAR)) printk("CFAR: "REG"\n", regs->orig_gpr3); @@ -1220,34 +1223,32 @@ void dump_stack(void) EXPORT_SYMBOL(dump_stack); #ifdef CONFIG_PPC64 -void ppc64_runlatch_on(void) +/* Called with hard IRQs off */ +void __ppc64_runlatch_on(void) { + struct thread_info *ti = current_thread_info(); unsigned long ctrl; - if (cpu_has_feature(CPU_FTR_CTRL) && !test_thread_flag(TIF_RUNLATCH)) { - HMT_medium(); - - ctrl = mfspr(SPRN_CTRLF); - ctrl |= CTRL_RUNLATCH; - mtspr(SPRN_CTRLT, ctrl); + ctrl = mfspr(SPRN_CTRLF); + ctrl |= CTRL_RUNLATCH; + mtspr(SPRN_CTRLT, ctrl); - set_thread_flag(TIF_RUNLATCH); - } + ti->local_flags |= TLF_RUNLATCH; } +/* Called with hard IRQs off */ void __ppc64_runlatch_off(void) { + struct thread_info *ti = current_thread_info(); unsigned long ctrl; - HMT_medium(); - - clear_thread_flag(TIF_RUNLATCH); + ti->local_flags &= ~TLF_RUNLATCH; ctrl = mfspr(SPRN_CTRLF); ctrl &= ~CTRL_RUNLATCH; mtspr(SPRN_CTRLT, ctrl); } -#endif +#endif /* CONFIG_PPC64 */ #if THREAD_SHIFT < PAGE_SHIFT diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index abe405dab34..89e850af3dd 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -52,9 +52,9 @@ #include <asm/machdep.h> #include <asm/pSeries_reconfig.h> #include <asm/pci-bridge.h> -#include <asm/phyp_dump.h> #include <asm/kexec.h> #include <asm/opal.h> +#include <asm/fadump.h> #include <mm/mmu_decl.h> @@ -615,86 +615,6 @@ static void __init early_reserve_mem(void) } } -#ifdef CONFIG_PHYP_DUMP -/** - * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg - * - * Function to find the largest size we need to reserve - * during early boot process. - * - * It either looks for boot param and returns that OR - * returns larger of 256 or 5% rounded down to multiples of 256MB. - * - */ -static inline unsigned long phyp_dump_calculate_reserve_size(void) -{ - unsigned long tmp; - - if (phyp_dump_info->reserve_bootvar) - return phyp_dump_info->reserve_bootvar; - - /* divide by 20 to get 5% of value */ - tmp = memblock_end_of_DRAM(); - do_div(tmp, 20); - - /* round it down in multiples of 256 */ - tmp = tmp & ~0x0FFFFFFFUL; - - return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END); -} - -/** - * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory - * - * This routine may reserve memory regions in the kernel only - * if the system is supported and a dump was taken in last - * boot instance or if the hardware is supported and the - * scratch area needs to be setup. In other instances it returns - * without reserving anything. The memory in case of dump being - * active is freed when the dump is collected (by userland tools). - */ -static void __init phyp_dump_reserve_mem(void) -{ - unsigned long base, size; - unsigned long variable_reserve_size; - - if (!phyp_dump_info->phyp_dump_configured) { - printk(KERN_ERR "Phyp-dump not supported on this hardware\n"); - return; - } - - if (!phyp_dump_info->phyp_dump_at_boot) { - printk(KERN_INFO "Phyp-dump disabled at boot time\n"); - return; - } - - variable_reserve_size = phyp_dump_calculate_reserve_size(); - - if (phyp_dump_info->phyp_dump_is_active) { - /* Reserve *everything* above RMR.Area freed by userland tools*/ - base = variable_reserve_size; - size = memblock_end_of_DRAM() - base; - - /* XXX crashed_ram_end is wrong, since it may be beyond - * the memory_limit, it will need to be adjusted. */ - memblock_reserve(base, size); - - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } else { - size = phyp_dump_info->cpu_state_size + - phyp_dump_info->hpte_region_size + - variable_reserve_size; - base = memblock_end_of_DRAM() - size; - memblock_reserve(base, size); - phyp_dump_info->init_reserve_start = base; - phyp_dump_info->init_reserve_size = size; - } -} -#else -static inline void __init phyp_dump_reserve_mem(void) {} -#endif /* CONFIG_PHYP_DUMP && CONFIG_PPC_RTAS */ - void __init early_init_devtree(void *params) { phys_addr_t limit; @@ -714,9 +634,9 @@ void __init early_init_devtree(void *params) of_scan_flat_dt(early_init_dt_scan_opal, NULL); #endif -#ifdef CONFIG_PHYP_DUMP - /* scan tree to see if dump occurred during last boot */ - of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL); +#ifdef CONFIG_FA_DUMP + /* scan tree to see if dump is active during last boot */ + of_scan_flat_dt(early_init_dt_scan_fw_dump, NULL); #endif /* Pre-initialize the cmd_line with the content of boot_commmand_line, @@ -750,9 +670,15 @@ void __init early_init_devtree(void *params) if (PHYSICAL_START > MEMORY_START) memblock_reserve(MEMORY_START, 0x8000); reserve_kdump_trampoline(); - reserve_crashkernel(); +#ifdef CONFIG_FA_DUMP + /* + * If we fail to reserve memory for firmware-assisted dump then + * fallback to kexec based kdump. + */ + if (fadump_reserve_mem() == 0) +#endif + reserve_crashkernel(); early_reserve_mem(); - phyp_dump_reserve_mem(); /* * Ensure that total memory size is page-aligned, because otherwise diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index eca626ea3f2..e2d59904814 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -48,14 +48,6 @@ #include <linux/linux_logo.h> /* - * Properties whose value is longer than this get excluded from our - * copy of the device tree. This value does need to be big enough to - * ensure that we don't lose things like the interrupt-map property - * on a PCI-PCI bridge. - */ -#define MAX_PROPERTY_LENGTH (1UL * 1024 * 1024) - -/* * Eventually bump that one up */ #define DEVTREE_CHUNK_SIZE 0x100000 @@ -2273,13 +2265,6 @@ static void __init scan_dt_build_struct(phandle node, unsigned long *mem_start, /* sanity checks */ if (l == PROM_ERROR) continue; - if (l > MAX_PROPERTY_LENGTH) { - prom_printf("WARNING: ignoring large property "); - /* It seems OF doesn't null-terminate the path :-( */ - prom_printf("[%s] ", path); - prom_printf("%s length 0x%x\n", RELOC(pname), l); - continue; - } /* push property head */ dt_push_token(OF_DT_PROP, mem_start, mem_end); diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 6cd8f0196b6..517bd86bc3f 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -275,6 +275,9 @@ void __init find_and_init_phbs(void) of_node_put(root); pci_devs_phb_init(); + /* Create EEH devices for all PHBs */ + eeh_dev_phb_init(); + /* * pci_probe_only and pci_assign_all_buses can be set via properties * in chosen. diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 77bb77da05c..b0ebdeab949 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -61,6 +61,7 @@ #include <asm/xmon.h> #include <asm/cputhreads.h> #include <mm/mmu_decl.h> +#include <asm/fadump.h> #include "setup.h" @@ -109,6 +110,14 @@ EXPORT_SYMBOL(ppc_do_canonicalize_irqs); /* also used by kexec */ void machine_shutdown(void) { +#ifdef CONFIG_FA_DUMP + /* + * if fadump is active, cleanup the fadump registration before we + * shutdown. + */ + fadump_cleanup(); +#endif + if (ppc_md.machine_shutdown) ppc_md.machine_shutdown(); } @@ -639,6 +648,11 @@ EXPORT_SYMBOL(check_legacy_ioport); static int ppc_panic_event(struct notifier_block *this, unsigned long event, void *ptr) { + /* + * If firmware-assisted dump has been registered then trigger + * firmware-assisted dump and let firmware handle everything else. + */ + crash_fadump(NULL, ptr); ppc_md.panic(ptr); /* May not return */ return NOTIFY_DONE; } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index ac6e437b102..7006b7f4267 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -57,10 +57,7 @@ void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs, void restore_sigmask(sigset_t *set) { sigdelsetmask(set, ~_BLOCKABLE); - spin_lock_irq(¤t->sighand->siglock); - current->blocked = *set; - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + set_current_blocked(set); } static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka, @@ -169,13 +166,7 @@ static int do_signal(struct pt_regs *regs) regs->trap = 0; if (ret) { - spin_lock_irq(¤t->sighand->siglock); - sigorsets(¤t->blocked, ¤t->blocked, - &ka.sa.sa_mask); - if (!(ka.sa.sa_flags & SA_NODEFER)) - sigaddset(¤t->blocked, signr); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + block_sigmask(&ka, signr); /* * A signal was successfully delivered; the saved sigmask is in diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index 836a5a19eb2..e061ef5dd44 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -242,12 +242,13 @@ static inline int restore_general_regs(struct pt_regs *regs, */ long sys_sigsuspend(old_sigset_t mask) { - mask &= _BLOCKABLE; - spin_lock_irq(¤t->sighand->siglock); + sigset_t blocked; + current->saved_sigmask = current->blocked; - siginitset(¤t->blocked, mask); - recalc_sigpending(); - spin_unlock_irq(¤t->sighand->siglock); + + mask &= _BLOCKABLE; + siginitset(&blocked, mask); + set_current_blocked(&blocked); current->state = TASK_INTERRUPTIBLE; schedule(); diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c index 883e74c0d1b..0c683d376b1 100644 --- a/arch/powerpc/kernel/sysfs.c +++ b/arch/powerpc/kernel/sysfs.c @@ -12,7 +12,6 @@ #include <asm/current.h> #include <asm/processor.h> #include <asm/cputable.h> -#include <asm/firmware.h> #include <asm/hvcall.h> #include <asm/prom.h> #include <asm/machdep.h> @@ -341,8 +340,7 @@ static void __cpuinit register_cpu_online(unsigned int cpu) int i, nattrs; #ifdef CONFIG_PPC64 - if (!firmware_has_feature(FW_FEATURE_ISERIES) && - cpu_has_feature(CPU_FTR_SMT)) + if (cpu_has_feature(CPU_FTR_SMT)) device_create_file(s, &dev_attr_smt_snooze_delay); #endif @@ -414,8 +412,7 @@ static void unregister_cpu_online(unsigned int cpu) BUG_ON(!c->hotpluggable); #ifdef CONFIG_PPC64 - if (!firmware_has_feature(FW_FEATURE_ISERIES) && - cpu_has_feature(CPU_FTR_SMT)) + if (cpu_has_feature(CPU_FTR_SMT)) device_remove_file(s, &dev_attr_smt_snooze_delay); #endif diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 567dd7c3ac2..2c42cd72d0f 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -17,8 +17,7 @@ * * TODO (not necessarily in this file): * - improve precision and reproducibility of timebase frequency - * measurement at boot time. (for iSeries, we calibrate the timebase - * against the Titan chip's clock.) + * measurement at boot time. * - for astronomical applications: add a new function to get * non ambiguous timestamps even around leap seconds. This needs * a new timestamp format and a good name. @@ -70,10 +69,6 @@ #include <asm/vdso_datapage.h> #include <asm/firmware.h> #include <asm/cputime.h> -#ifdef CONFIG_PPC_ISERIES -#include <asm/iseries/it_lp_queue.h> -#include <asm/iseries/hv_call_xm.h> -#endif /* powerpc clocksource/clockevent code */ @@ -117,14 +112,6 @@ static struct clock_event_device decrementer_clockevent = { DEFINE_PER_CPU(u64, decrementers_next_tb); static DEFINE_PER_CPU(struct clock_event_device, decrementers); -#ifdef CONFIG_PPC_ISERIES -static unsigned long __initdata iSeries_recal_titan; -static signed long __initdata iSeries_recal_tb; - -/* Forward declaration is only needed for iSereis compiles */ -static void __init clocksource_init(void); -#endif - #define XSEC_PER_SEC (1024*1024) #ifdef CONFIG_PPC64 @@ -259,7 +246,6 @@ void accumulate_stolen_time(void) u64 sst, ust; u8 save_soft_enabled = local_paca->soft_enabled; - u8 save_hard_enabled = local_paca->hard_enabled; /* We are called early in the exception entry, before * soft/hard_enabled are sync'ed to the expected state @@ -268,7 +254,6 @@ void accumulate_stolen_time(void) * complain */ local_paca->soft_enabled = 0; - local_paca->hard_enabled = 0; sst = scan_dispatch_log(local_paca->starttime_user); ust = scan_dispatch_log(local_paca->starttime); @@ -277,7 +262,6 @@ void accumulate_stolen_time(void) local_paca->stolen_time += ust + sst; local_paca->soft_enabled = save_soft_enabled; - local_paca->hard_enabled = save_hard_enabled; } static inline u64 calculate_stolen_time(u64 stop_tb) @@ -426,74 +410,6 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); #endif -#ifdef CONFIG_PPC_ISERIES - -/* - * This function recalibrates the timebase based on the 49-bit time-of-day - * value in the Titan chip. The Titan is much more accurate than the value - * returned by the service processor for the timebase frequency. - */ - -static int __init iSeries_tb_recal(void) -{ - unsigned long titan, tb; - - /* Make sure we only run on iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; - - tb = get_tb(); - titan = HvCallXm_loadTod(); - if ( iSeries_recal_titan ) { - unsigned long tb_ticks = tb - iSeries_recal_tb; - unsigned long titan_usec = (titan - iSeries_recal_titan) >> 12; - unsigned long new_tb_ticks_per_sec = (tb_ticks * USEC_PER_SEC)/titan_usec; - unsigned long new_tb_ticks_per_jiffy = - DIV_ROUND_CLOSEST(new_tb_ticks_per_sec, HZ); - long tick_diff = new_tb_ticks_per_jiffy - tb_ticks_per_jiffy; - char sign = '+'; - /* make sure tb_ticks_per_sec and tb_ticks_per_jiffy are consistent */ - new_tb_ticks_per_sec = new_tb_ticks_per_jiffy * HZ; - - if ( tick_diff < 0 ) { - tick_diff = -tick_diff; - sign = '-'; - } - if ( tick_diff ) { - if ( tick_diff < tb_ticks_per_jiffy/25 ) { - printk( "Titan recalibrate: new tb_ticks_per_jiffy = %lu (%c%ld)\n", - new_tb_ticks_per_jiffy, sign, tick_diff ); - tb_ticks_per_jiffy = new_tb_ticks_per_jiffy; - tb_ticks_per_sec = new_tb_ticks_per_sec; - calc_cputime_factors(); - vdso_data->tb_ticks_per_sec = tb_ticks_per_sec; - setup_cputime_one_jiffy(); - } - else { - printk( "Titan recalibrate: FAILED (difference > 4 percent)\n" - " new tb_ticks_per_jiffy = %lu\n" - " old tb_ticks_per_jiffy = %lu\n", - new_tb_ticks_per_jiffy, tb_ticks_per_jiffy ); - } - } - } - iSeries_recal_titan = titan; - iSeries_recal_tb = tb; - - /* Called here as now we know accurate values for the timebase */ - clocksource_init(); - return 0; -} -late_initcall(iSeries_tb_recal); - -/* Called from platform early init */ -void __init iSeries_time_init_early(void) -{ - iSeries_recal_tb = get_tb(); - iSeries_recal_titan = HvCallXm_loadTod(); -} -#endif /* CONFIG_PPC_ISERIES */ - #ifdef CONFIG_IRQ_WORK /* @@ -550,16 +466,6 @@ void arch_irq_work_raise(void) #endif /* CONFIG_IRQ_WORK */ /* - * For iSeries shared processors, we have to let the hypervisor - * set the hardware decrementer. We set a virtual decrementer - * in the lppaca and call the hypervisor if the virtual - * decrementer is less than the current value in the hardware - * decrementer. (almost always the new decrementer value will - * be greater than the current hardware decementer so the hypervisor - * call will not be needed) - */ - -/* * timer_interrupt - gets called when the decrementer overflows, * with interrupts disabled. */ @@ -580,6 +486,11 @@ void timer_interrupt(struct pt_regs * regs) if (!cpu_online(smp_processor_id())) return; + /* Conditionally hard-enable interrupts now that the DEC has been + * bumped to its maximum value + */ + may_hard_irq_enable(); + trace_timer_interrupt_entry(regs); __get_cpu_var(irq_stat).timer_irqs++; @@ -597,20 +508,10 @@ void timer_interrupt(struct pt_regs * regs) irq_work_run(); } -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) - get_lppaca()->int_dword.fields.decr_int = 0; -#endif - *next_tb = ~(u64)0; if (evt->event_handler) evt->event_handler(evt); -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES) && hvlpevent_is_pending()) - process_hvlpevents(); -#endif - #ifdef CONFIG_PPC64 /* collect purr register values often, for accurate calculations */ if (firmware_has_feature(FW_FEATURE_SPLPAR)) { @@ -982,9 +883,8 @@ void __init time_init(void) */ start_cpu_decrementer(); - /* Register the clocksource, if we're not running on iSeries */ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - clocksource_init(); + /* Register the clocksource */ + clocksource_init(); init_decrementer_clockevent(); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index c091527efd8..a750409ccc4 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -57,6 +57,7 @@ #include <asm/kexec.h> #include <asm/ppc-opcode.h> #include <asm/rio.h> +#include <asm/fadump.h> #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -145,6 +146,8 @@ static void __kprobes oops_end(unsigned long flags, struct pt_regs *regs, arch_spin_unlock(&die_lock); raw_local_irq_restore(flags); + crash_fadump(regs, "die oops"); + /* * A system reset (0x100) is a request to dump, so we always send * it through the crashdump code. @@ -244,6 +247,9 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr) addr, regs->nip, regs->link, code); } + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); + memset(&info, 0, sizeof(info)); info.si_signo = signr; info.si_code = code; diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 8b086299ba2..bca3fc427b4 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -34,11 +34,6 @@ #include <asm/abs_addr.h> #include <asm/page.h> #include <asm/hvcall.h> -#include <asm/iseries/vio.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/iseries/iommu.h> static struct bus_type vio_bus_type; @@ -1042,7 +1037,6 @@ static void vio_cmo_sysfs_init(void) vio_bus_type.bus_attrs = vio_cmo_bus_attrs; } #else /* CONFIG_PPC_SMLPAR */ -/* Dummy functions for iSeries platform */ int vio_cmo_entitlement_update(size_t new_entitlement) { return 0; } void vio_cmo_set_dev_desired(struct vio_dev *viodev, size_t desired) {} static int vio_cmo_bus_probe(struct vio_dev *viodev) { return 0; } @@ -1060,9 +1054,6 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) struct iommu_table *tbl; unsigned long offset, size; - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return vio_build_iommu_table_iseries(dev); - dma_window = of_get_property(dev->dev.of_node, "ibm,my-dma-window", NULL); if (!dma_window) @@ -1195,8 +1186,7 @@ static void __devinit vio_dev_release(struct device *dev) { struct iommu_table *tbl = get_iommu_table_base(dev); - /* iSeries uses a common table for all vio devices */ - if (!firmware_has_feature(FW_FEATURE_ISERIES) && tbl) + if (tbl) iommu_free_table(tbl, dev->of_node ? dev->of_node->full_name : dev_name(dev)); of_node_put(dev->of_node); @@ -1244,12 +1234,6 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node) viodev->name = of_node->name; viodev->type = of_node->type; viodev->unit_address = *unit_address; - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - unit_address = of_get_property(of_node, - "linux,unit_address", NULL); - if (unit_address != NULL) - viodev->unit_address = *unit_address; - } viodev->dev.of_node = of_node_get(of_node); if (firmware_has_feature(FW_FEATURE_CMO)) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 710a54005df..65d1c08cf09 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -109,11 +109,6 @@ SECTIONS __ptov_table_begin = .; *(.ptov_fixup); __ptov_table_end = .; -#ifdef CONFIG_PPC_ISERIES - __dt_strings_start = .; - *(.dt_strings); - __dt_strings_end = .; -#endif } .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) { diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 336983da9e7..a7267167a55 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -46,7 +46,6 @@ #include <asm/page.h> #include <asm/hvcall.h> #include <linux/gfp.h> -#include <linux/sched.h> #include <linux/vmalloc.h> #include <linux/highmem.h> diff --git a/arch/powerpc/lib/locks.c b/arch/powerpc/lib/locks.c index a6ebba56fdd..bb7cfecf278 100644 --- a/arch/powerpc/lib/locks.c +++ b/arch/powerpc/lib/locks.c @@ -19,11 +19,9 @@ #include <linux/smp.h> /* waiting for a spinlock... */ -#if defined(CONFIG_PPC_SPLPAR) || defined(CONFIG_PPC_ISERIES) +#if defined(CONFIG_PPC_SPLPAR) #include <asm/hvcall.h> -#include <asm/iseries/hv_call.h> #include <asm/smp.h> -#include <asm/firmware.h> void __spin_yield(arch_spinlock_t *lock) { @@ -40,14 +38,8 @@ void __spin_yield(arch_spinlock_t *lock) rmb(); if (lock->slock != lock_value) return; /* something has changed */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc, - ((u64)holder_cpu << 32) | yield_count); -#ifdef CONFIG_PPC_SPLPAR - else - plpar_hcall_norets(H_CONFER, - get_hard_smp_processor_id(holder_cpu), yield_count); -#endif + plpar_hcall_norets(H_CONFER, + get_hard_smp_processor_id(holder_cpu), yield_count); } /* @@ -71,14 +63,8 @@ void __rw_yield(arch_rwlock_t *rw) rmb(); if (rw->lock != lock_value) return; /* something has changed */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - HvCall2(HvCallBaseYieldProcessor, HvCall_YieldToProc, - ((u64)holder_cpu << 32) | yield_count); -#ifdef CONFIG_PPC_SPLPAR - else - plpar_hcall_norets(H_CONFER, - get_hard_smp_processor_id(holder_cpu), yield_count); -#endif + plpar_hcall_norets(H_CONFER, + get_hard_smp_processor_id(holder_cpu), yield_count); } #endif diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c index 2f0d1b032a8..19f2f9498b2 100644 --- a/arch/powerpc/mm/fault.c +++ b/arch/powerpc/mm/fault.c @@ -105,6 +105,82 @@ static int store_updates_sp(struct pt_regs *regs) } return 0; } +/* + * do_page_fault error handling helpers + */ + +#define MM_FAULT_RETURN 0 +#define MM_FAULT_CONTINUE -1 +#define MM_FAULT_ERR(sig) (sig) + +static int out_of_memory(struct pt_regs *regs) +{ + /* + * We ran out of memory, or some other thing happened to us that made + * us unable to handle the page fault gracefully. + */ + up_read(¤t->mm->mmap_sem); + if (!user_mode(regs)) + return MM_FAULT_ERR(SIGKILL); + pagefault_out_of_memory(); + return MM_FAULT_RETURN; +} + +static int do_sigbus(struct pt_regs *regs, unsigned long address) +{ + siginfo_t info; + + up_read(¤t->mm->mmap_sem); + + if (user_mode(regs)) { + info.si_signo = SIGBUS; + info.si_errno = 0; + info.si_code = BUS_ADRERR; + info.si_addr = (void __user *)address; + force_sig_info(SIGBUS, &info, current); + return MM_FAULT_RETURN; + } + return MM_FAULT_ERR(SIGBUS); +} + +static int mm_fault_error(struct pt_regs *regs, unsigned long addr, int fault) +{ + /* + * Pagefault was interrupted by SIGKILL. We have no reason to + * continue the pagefault. + */ + if (fatal_signal_pending(current)) { + /* + * If we have retry set, the mmap semaphore will have + * alrady been released in __lock_page_or_retry(). Else + * we release it now. + */ + if (!(fault & VM_FAULT_RETRY)) + up_read(¤t->mm->mmap_sem); + /* Coming from kernel, we need to deal with uaccess fixups */ + if (user_mode(regs)) + return MM_FAULT_RETURN; + return MM_FAULT_ERR(SIGKILL); + } + + /* No fault: be happy */ + if (!(fault & VM_FAULT_ERROR)) + return MM_FAULT_CONTINUE; + + /* Out of memory */ + if (fault & VM_FAULT_OOM) + return out_of_memory(regs); + + /* Bus error. x86 handles HWPOISON here, we'll add this if/when + * we support the feature in HW + */ + if (fault & VM_FAULT_SIGBUS) + return do_sigbus(regs, addr); + + /* We don't understand the fault code, this is fatal */ + BUG(); + return MM_FAULT_CONTINUE; +} /* * For 600- and 800-family processors, the error_code parameter is DSISR @@ -124,11 +200,12 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, { struct vm_area_struct * vma; struct mm_struct *mm = current->mm; - siginfo_t info; + unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; int code = SEGV_MAPERR; - int is_write = 0, ret; + int is_write = 0; int trap = TRAP(regs); int is_exec = trap == 0x400; + int fault; #if !(defined(CONFIG_4xx) || defined(CONFIG_BOOKE)) /* @@ -145,6 +222,9 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, is_write = error_code & ESR_DST; #endif /* CONFIG_4xx || CONFIG_BOOKE */ + if (is_write) + flags |= FAULT_FLAG_WRITE; + #ifdef CONFIG_PPC_ICSWX /* * we need to do this early because this "data storage @@ -152,13 +232,11 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, * look at it */ if (error_code & ICSWX_DSI_UCT) { - int ret; - - ret = acop_handle_fault(regs, address, error_code); - if (ret) - return ret; + int rc = acop_handle_fault(regs, address, error_code); + if (rc) + return rc; } -#endif +#endif /* CONFIG_PPC_ICSWX */ if (notify_page_fault(regs)) return 0; @@ -179,6 +257,10 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, } #endif + /* We restore the interrupt state now */ + if (!arch_irq_disabled_regs(regs)) + local_irq_enable(); + if (in_atomic() || mm == NULL) { if (!user_mode(regs)) return SIGSEGV; @@ -212,7 +294,15 @@ int __kprobes do_page_fault(struct pt_regs *regs, unsigned long address, if (!user_mode(regs) && !search_exception_tables(regs->nip)) goto bad_area_nosemaphore; +retry: down_read(&mm->mmap_sem); + } else { + /* + * The above down_read_trylock() might have succeeded in + * which case we'll have missed the might_sleep() from + * down_read(): + */ + might_sleep(); } vma = find_vma(mm, address); @@ -327,30 +417,43 @@ good_area: * make sure we exit gracefully rather than endlessly redo * the fault. */ - ret = handle_mm_fault(mm, vma, address, is_write ? FAULT_FLAG_WRITE : 0); - if (unlikely(ret & VM_FAULT_ERROR)) { - if (ret & VM_FAULT_OOM) - goto out_of_memory; - else if (ret & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); + fault = handle_mm_fault(mm, vma, address, flags); + if (unlikely(fault & (VM_FAULT_RETRY|VM_FAULT_ERROR))) { + int rc = mm_fault_error(regs, address, fault); + if (rc >= MM_FAULT_RETURN) + return rc; } - if (ret & VM_FAULT_MAJOR) { - current->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, - regs, address); + + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + current->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, + regs, address); #ifdef CONFIG_PPC_SMLPAR - if (firmware_has_feature(FW_FEATURE_CMO)) { - preempt_disable(); - get_lppaca()->page_ins += (1 << PAGE_FACTOR); - preempt_enable(); + if (firmware_has_feature(FW_FEATURE_CMO)) { + preempt_disable(); + get_lppaca()->page_ins += (1 << PAGE_FACTOR); + preempt_enable(); + } +#endif /* CONFIG_PPC_SMLPAR */ + } else { + current->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, + regs, address); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; } -#endif - } else { - current->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, - regs, address); } + up_read(&mm->mmap_sem); return 0; @@ -371,28 +474,6 @@ bad_area_nosemaphore: return SIGSEGV; -/* - * We ran out of memory, or some other thing happened to us that made - * us unable to handle the page fault gracefully. - */ -out_of_memory: - up_read(&mm->mmap_sem); - if (!user_mode(regs)) - return SIGKILL; - pagefault_out_of_memory(); - return 0; - -do_sigbus: - up_read(&mm->mmap_sem); - if (user_mode(regs)) { - info.si_signo = SIGBUS; - info.si_errno = 0; - info.si_code = BUS_ADRERR; - info.si_addr = (void __user *)address; - force_sig_info(SIGBUS, &info, current); - return 0; - } - return SIGBUS; } /* diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c index 66a6fd38e9c..07ba45b0f07 100644 --- a/arch/powerpc/mm/fsl_booke_mmu.c +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -149,12 +149,19 @@ static void settlbcam(int index, unsigned long virt, phys_addr_t phys, unsigned long calc_cam_sz(unsigned long ram, unsigned long virt, phys_addr_t phys) { - unsigned int camsize = __ilog2(ram) & ~1U; - unsigned int align = __ffs(virt | phys) & ~1U; - unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; - - /* Convert (4^max) kB to (2^max) bytes */ - max_cam = max_cam * 2 + 10; + unsigned int camsize = __ilog2(ram); + unsigned int align = __ffs(virt | phys); + unsigned long max_cam; + + if ((mfspr(SPRN_MMUCFG) & MMUCFG_MAVN) == MMUCFG_MAVN_V1) { + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = ((mfspr(SPRN_TLB1CFG) >> 16) & 0xf) * 2 + 10; + camsize &= ~1U; + align &= ~1U; + } else { + /* Convert (2^max) kB to (2^max) bytes */ + max_cam = __ilog2(mfspr(SPRN_TLB1PS)) + 10; + } if (camsize > align) camsize = align; diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 2d282186cb4..3e8c37a4e39 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -55,6 +55,8 @@ #include <asm/spu.h> #include <asm/udbg.h> #include <asm/code-patching.h> +#include <asm/fadump.h> +#include <asm/firmware.h> #ifdef DEBUG #define DBG(fmt...) udbg_printf(fmt) @@ -625,6 +627,16 @@ static void __init htab_initialize(void) /* Using a hypervisor which owns the htab */ htab_address = NULL; _SDR1 = 0; +#ifdef CONFIG_FA_DUMP + /* + * If firmware assisted dump is active firmware preserves + * the contents of htab along with entire partition memory. + * Clear the htab if firmware assisted dump is active so + * that we dont end up using old mappings. + */ + if (is_fadump_active() && ppc_md.hpte_clear_all) + ppc_md.hpte_clear_all(); +#endif } else { /* Find storage for the HPT. Must be contiguous in * the absolute address space. On cell we want it to be @@ -745,12 +757,9 @@ void __init early_init_mmu(void) */ htab_initialize(); - /* Initialize stab / SLB management except on iSeries - */ + /* Initialize stab / SLB management */ if (mmu_has_feature(MMU_FTR_SLB)) slb_initialize(); - else if (!firmware_has_feature(FW_FEATURE_ISERIES)) - stab_initialize(get_paca()->stab_real); } #ifdef CONFIG_SMP @@ -761,8 +770,7 @@ void __cpuinit early_init_mmu_secondary(void) mtspr(SPRN_SDR1, _SDR1); /* Initialize STAB/SLB. We use a virtual address as it works - * in real mode on pSeries and we want a virtual address on - * iSeries anyway + * in real mode on pSeries. */ if (mmu_has_feature(MMU_FTR_SLB)) slb_initialize(); diff --git a/arch/powerpc/mm/icswx.c b/arch/powerpc/mm/icswx.c index 5d9a59eaad9..8cdbd8634a5 100644 --- a/arch/powerpc/mm/icswx.c +++ b/arch/powerpc/mm/icswx.c @@ -163,7 +163,7 @@ EXPORT_SYMBOL_GPL(drop_cop); static int acop_use_cop(int ct) { - /* todo */ + /* There is no alternate policy, yet */ return -1; } @@ -227,11 +227,30 @@ int acop_handle_fault(struct pt_regs *regs, unsigned long address, ct = (ccw >> 16) & 0x3f; } + /* + * We could be here because another thread has enabled acop + * but the ACOP register has yet to be updated. + * + * This should have been taken care of by the IPI to sync all + * the threads (see smp_call_function(sync_cop, mm, 1)), but + * that could take forever if there are a significant amount + * of threads. + * + * Given the number of threads on some of these systems, + * perhaps this is the best way to sync ACOP rather than whack + * every thread with an IPI. + */ + if ((acop_copro_type_bit(ct) & current->active_mm->context.acop) != 0) { + sync_cop(current->active_mm); + return 0; + } + + /* check for alternate policy */ if (!acop_use_cop(ct)) return 0; /* at this point the CT is unknown to the system */ - pr_warn("%s[%d]: Coprocessor %d is unavailable", + pr_warn("%s[%d]: Coprocessor %d is unavailable\n", current->comm, current->pid, ct); /* get inst if we don't already have it */ diff --git a/arch/powerpc/mm/icswx.h b/arch/powerpc/mm/icswx.h index 42176bd0884..6dedc08e62c 100644 --- a/arch/powerpc/mm/icswx.h +++ b/arch/powerpc/mm/icswx.h @@ -59,4 +59,10 @@ extern void free_cop_pid(int free_pid); extern int acop_handle_fault(struct pt_regs *regs, unsigned long address, unsigned long error_code); + +static inline u64 acop_copro_type_bit(unsigned int type) +{ + return 1ULL << (63 - type); +} + #endif /* !_ARCH_POWERPC_MM_ICSWX_H_ */ diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 51f87956f8f..0907f92ce30 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -207,7 +207,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags, */ if (mem_init_done && (p < virt_to_phys(high_memory)) && !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) { - printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n", + printk("__ioremap(): phys addr 0x%llx is RAM lr %pf\n", (unsigned long long)p, __builtin_return_address(0)); return NULL; } diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c index e22276cb67a..a538c80db2d 100644 --- a/arch/powerpc/mm/slb.c +++ b/arch/powerpc/mm/slb.c @@ -21,7 +21,6 @@ #include <asm/cputable.h> #include <asm/cacheflush.h> #include <asm/smp.h> -#include <asm/firmware.h> #include <linux/compiler.h> #include <asm/udbg.h> #include <asm/code-patching.h> @@ -307,11 +306,6 @@ void slb_initialize(void) get_paca()->stab_rr = SLB_NUM_BOLTED; - /* On iSeries the bolted entries have already been set up by - * the hypervisor from the lparMap data in head.S */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return; - lflags = SLB_VSID_KERNEL | linear_llp; vflags = SLB_VSID_KERNEL | vmalloc_llp; diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S index ef653dc95b6..b9ee79ce220 100644 --- a/arch/powerpc/mm/slb_low.S +++ b/arch/powerpc/mm/slb_low.S @@ -217,21 +217,6 @@ slb_finish_load: * free slot first but that took too long. Unfortunately we * dont have any LRU information to help us choose a slot. */ -#ifdef CONFIG_PPC_ISERIES -BEGIN_FW_FTR_SECTION - /* - * On iSeries, the "bolted" stack segment can be cast out on - * shared processor switch so we need to check for a miss on - * it and restore it to the right slot. - */ - ld r9,PACAKSAVE(r13) - clrrdi r9,r9,28 - clrrdi r3,r3,28 - li r10,SLB_NUM_BOLTED-1 /* Stack goes in last bolted slot */ - cmpld r9,r3 - beq 3f -END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES) -#endif /* CONFIG_PPC_ISERIES */ 7: ld r10,PACASTABRR(r13) addi r10,r10,1 @@ -282,7 +267,6 @@ _GLOBAL(slb_compare_rr_to_size) /* * Finish loading of a 1T SLB entry (for the kernel linear mapping) and return. - * We assume legacy iSeries will never have 1T segments. * * r3 = EA, r10 = proto-VSID, r11 = flags, clobbers r9 */ diff --git a/arch/powerpc/mm/stab.c b/arch/powerpc/mm/stab.c index 41e31642a86..9106ebb118f 100644 --- a/arch/powerpc/mm/stab.c +++ b/arch/powerpc/mm/stab.c @@ -21,8 +21,6 @@ #include <asm/cputable.h> #include <asm/prom.h> #include <asm/abs_addr.h> -#include <asm/firmware.h> -#include <asm/iseries/hv_call.h> struct stab_entry { unsigned long esid_data; @@ -285,12 +283,5 @@ void stab_initialize(unsigned long stab) /* Set ASR */ stabreal = get_paca()->stab_real | 0x1ul; -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - HvCall1(HvCallBaseSetASR, stabreal); - return; - } -#endif /* CONFIG_PPC_ISERIES */ - mtspr(SPRN_ASR, stabreal); } diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index d65e68f3cb2..6f01624f317 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -195,9 +195,6 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) if (!cur_cpu_spec->oprofile_cpu_type) return -ENODEV; - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return -ENODEV; - switch (cur_cpu_spec->oprofile_type) { #ifdef CONFIG_PPC_BOOK3S_64 #ifdef CONFIG_OPROFILE_CELL diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile new file mode 100644 index 00000000000..af3fac23768 --- /dev/null +++ b/arch/powerpc/perf/Makefile @@ -0,0 +1,14 @@ +subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror + +obj-$(CONFIG_PERF_EVENTS) += callchain.o + +obj-$(CONFIG_PPC_PERF_CTRS) += core-book3s.o +obj64-$(CONFIG_PPC_PERF_CTRS) += power4-pmu.o ppc970-pmu.o power5-pmu.o \ + power5+-pmu.o power6-pmu.o power7-pmu.o +obj32-$(CONFIG_PPC_PERF_CTRS) += mpc7450-pmu.o + +obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o +obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o + +obj-$(CONFIG_PPC64) += $(obj64-y) +obj-$(CONFIG_PPC32) += $(obj32-y) diff --git a/arch/powerpc/kernel/perf_callchain.c b/arch/powerpc/perf/callchain.c index 564c1d8bdb5..e8a18d1cc7c 100644 --- a/arch/powerpc/kernel/perf_callchain.c +++ b/arch/powerpc/perf/callchain.c @@ -20,7 +20,7 @@ #include <asm/ucontext.h> #include <asm/vdso.h> #ifdef CONFIG_PPC64 -#include "ppc32.h" +#include "../kernel/ppc32.h" #endif diff --git a/arch/powerpc/kernel/perf_event.c b/arch/powerpc/perf/core-book3s.c index c2e27ede07e..c2e27ede07e 100644 --- a/arch/powerpc/kernel/perf_event.c +++ b/arch/powerpc/perf/core-book3s.c diff --git a/arch/powerpc/kernel/perf_event_fsl_emb.c b/arch/powerpc/perf/core-fsl-emb.c index 0a6d2a9d569..0a6d2a9d569 100644 --- a/arch/powerpc/kernel/perf_event_fsl_emb.c +++ b/arch/powerpc/perf/core-fsl-emb.c diff --git a/arch/powerpc/kernel/e500-pmu.c b/arch/powerpc/perf/e500-pmu.c index cb2e2949c8d..cb2e2949c8d 100644 --- a/arch/powerpc/kernel/e500-pmu.c +++ b/arch/powerpc/perf/e500-pmu.c diff --git a/arch/powerpc/kernel/mpc7450-pmu.c b/arch/powerpc/perf/mpc7450-pmu.c index fe21b515ca4..fe21b515ca4 100644 --- a/arch/powerpc/kernel/mpc7450-pmu.c +++ b/arch/powerpc/perf/mpc7450-pmu.c diff --git a/arch/powerpc/kernel/power4-pmu.c b/arch/powerpc/perf/power4-pmu.c index b4f1dda4d08..b4f1dda4d08 100644 --- a/arch/powerpc/kernel/power4-pmu.c +++ b/arch/powerpc/perf/power4-pmu.c diff --git a/arch/powerpc/kernel/power5+-pmu.c b/arch/powerpc/perf/power5+-pmu.c index a8757baa28f..a8757baa28f 100644 --- a/arch/powerpc/kernel/power5+-pmu.c +++ b/arch/powerpc/perf/power5+-pmu.c diff --git a/arch/powerpc/kernel/power5-pmu.c b/arch/powerpc/perf/power5-pmu.c index e7f06eb7a86..e7f06eb7a86 100644 --- a/arch/powerpc/kernel/power5-pmu.c +++ b/arch/powerpc/perf/power5-pmu.c diff --git a/arch/powerpc/kernel/power6-pmu.c b/arch/powerpc/perf/power6-pmu.c index 0bbc901e7ef..31128e086fe 100644 --- a/arch/powerpc/kernel/power6-pmu.c +++ b/arch/powerpc/perf/power6-pmu.c @@ -131,7 +131,7 @@ static u32 marked_bus_events[16] = { 0x00000022, /* BFP set 2: byte 0 bits 1, 5 */ 0, 0 }; - + /* * Returns 1 if event counts things relating to marked instructions * and thus needs the MMCRA_SAMPLE_ENABLE bit set, or 0 if not. diff --git a/arch/powerpc/kernel/power7-pmu.c b/arch/powerpc/perf/power7-pmu.c index 1251e4d7e26..1251e4d7e26 100644 --- a/arch/powerpc/kernel/power7-pmu.c +++ b/arch/powerpc/perf/power7-pmu.c diff --git a/arch/powerpc/kernel/ppc970-pmu.c b/arch/powerpc/perf/ppc970-pmu.c index 8c219020696..111eb25bb0b 100644 --- a/arch/powerpc/kernel/ppc970-pmu.c +++ b/arch/powerpc/perf/ppc970-pmu.c @@ -252,7 +252,7 @@ static int p970_get_alternatives(u64 event, unsigned int flags, u64 alt[]) alt[1] = event ^ 0x1000; return 2; } - + return 1; } diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index fcf6bf2ceee..2e4e64abfab 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -23,6 +23,7 @@ config BLUESTONE default n select PPC44x_SIMPLE select APM821xx + select PPC4xx_PCI_EXPRESS select IBM_EMAC_RGMII help This option enables support for the APM APM821xx Evaluation board. diff --git a/arch/powerpc/platforms/44x/currituck.c b/arch/powerpc/platforms/44x/currituck.c index 3f6229b5dee..583e67fee37 100644 --- a/arch/powerpc/platforms/44x/currituck.c +++ b/arch/powerpc/platforms/44x/currituck.c @@ -83,7 +83,7 @@ static void __init ppc47x_init_irq(void) * device-tree, just pass 0 to all arguments */ struct mpic *mpic = - mpic_alloc(np, 0, 0, 0, 0, " MPIC "); + mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); ppc_md.get_irq = mpic_get_irq; diff --git a/arch/powerpc/platforms/44x/iss4xx.c b/arch/powerpc/platforms/44x/iss4xx.c index 5b8cdbb82f8..a28a8629727 100644 --- a/arch/powerpc/platforms/44x/iss4xx.c +++ b/arch/powerpc/platforms/44x/iss4xx.c @@ -71,8 +71,7 @@ static void __init iss4xx_init_irq(void) /* The MPIC driver will get everything it needs from the * device-tree, just pass 0 to all arguments */ - struct mpic *mpic = mpic_alloc(np, 0, 0, 0, 0, - " MPIC "); + struct mpic *mpic = mpic_alloc(np, 0, MPIC_NO_RESET, 0, 0, " MPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); ppc_md.get_irq = mpic_get_irq; diff --git a/arch/powerpc/platforms/44x/ppc44x_simple.c b/arch/powerpc/platforms/44x/ppc44x_simple.c index 8d220276341..3ffb915446e 100644 --- a/arch/powerpc/platforms/44x/ppc44x_simple.c +++ b/arch/powerpc/platforms/44x/ppc44x_simple.c @@ -52,7 +52,7 @@ machine_device_initcall(ppc44x_simple, ppc44x_device_probe); static char *board[] __initdata = { "amcc,arches", "amcc,bamboo", - "amcc,bluestone", + "apm,bluestone", "amcc,glacier", "ibm,ebony", "amcc,eiger", diff --git a/arch/powerpc/platforms/52xx/mpc5200_simple.c b/arch/powerpc/platforms/52xx/mpc5200_simple.c index 846b789fb19..c0aa04068d6 100644 --- a/arch/powerpc/platforms/52xx/mpc5200_simple.c +++ b/arch/powerpc/platforms/52xx/mpc5200_simple.c @@ -50,6 +50,7 @@ static void __init mpc5200_simple_setup_arch(void) /* list of the supported boards */ static const char *board[] __initdata = { + "anonymous,a4m072", "anon,charon", "intercontrol,digsy-mtc", "manroland,mucmc52", diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 369fd5457a3..d7e94f49532 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -98,13 +98,11 @@ struct mpc52xx_gpio_wkup __iomem *wkup_gpio; * of the localplus bus to the of_platform * bus. */ -void __init -mpc52xx_declare_of_platform_devices(void) +void __init mpc52xx_declare_of_platform_devices(void) { - /* Find every child of the SOC node and add it to of_platform */ - if (of_platform_bus_probe(NULL, mpc52xx_bus_ids, NULL)) - printk(KERN_ERR __FILE__ ": " - "Error while probing of_platform bus\n"); + /* Find all the 'platform' devices and register them. */ + if (of_platform_populate(NULL, mpc52xx_bus_ids, NULL, NULL)) + pr_err(__FILE__ ": Error while populating devices from DT\n"); } /* diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index d7946be298b..f000d81c4e3 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -6,6 +6,7 @@ menuconfig FSL_SOC_BOOKE select MPIC select PPC_PCI_CHOICE select FSL_PCI if PCI + select SERIAL_8250_EXTENDED if SERIAL_8250 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 default y @@ -13,6 +14,15 @@ if FSL_SOC_BOOKE if PPC32 +config FSL_85XX_CACHE_SRAM + bool + select PPC_LIB_RHEAP + help + When selected, this option enables cache-sram support + for memory allocation on P1/P2 QorIQ platforms. + cache-sram-size and cache-sram-offset kernel boot + parameters should be passed when this option is enabled. + config MPC8540_ADS bool "Freescale MPC8540 ADS" select DEFAULT_UIMAGE @@ -30,6 +40,7 @@ config MPC85xx_CDS bool "Freescale MPC85xx CDS" select DEFAULT_UIMAGE select PPC_I8259 + select HAS_RAPIDIO help This option enables support for the MPC85xx CDS board @@ -80,7 +91,6 @@ config P1010_RDB config P1022_DS bool "Freescale P1022 DS" select DEFAULT_UIMAGE - select PHYS_64BIT # The DTS has 36-bit addresses select SWIOTLB help This option enables support for the Freescale P1022DS reference board. @@ -171,6 +181,21 @@ config SBC8560 help This option enables support for the Wind River SBC8560 board +config GE_IMP3A + bool "GE Intelligent Platforms IMP3A" + select DEFAULT_UIMAGE + select SWIOTLB + select MMIO_NVRAM + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + select GE_FPGA + help + This option enables support for the GE Intelligent Platforms IMP3A + board. + + This board is a 3U CompactPCI Single Board Computer with a Freescale + P2020 processor. + config P2041_RDB bool "Freescale P2041 RDB" select DEFAULT_UIMAGE diff --git a/arch/powerpc/platforms/85xx/Makefile b/arch/powerpc/platforms/85xx/Makefile index 9cb2d4320dc..2125d4ca068 100644 --- a/arch/powerpc/platforms/85xx/Makefile +++ b/arch/powerpc/platforms/85xx/Makefile @@ -27,3 +27,4 @@ obj-$(CONFIG_SBC8548) += sbc8548.o obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o obj-$(CONFIG_KSI8560) += ksi8560.o obj-$(CONFIG_XES_MPC85xx) += xes_mpc85xx.o +obj-$(CONFIG_GE_IMP3A) += ge_imp3a.o diff --git a/arch/powerpc/platforms/85xx/corenet_ds.c b/arch/powerpc/platforms/85xx/corenet_ds.c index 07e3e6c4737..df69e99e511 100644 --- a/arch/powerpc/platforms/85xx/corenet_ds.c +++ b/arch/powerpc/platforms/85xx/corenet_ds.c @@ -36,8 +36,8 @@ void __init corenet_ds_pic_init(void) { struct mpic *mpic; - unsigned int flags = MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU; + unsigned int flags = MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU | + MPIC_NO_RESET; if (ppc_md.get_irq == mpic_get_coreint_irq) flags |= MPIC_ENABLE_COREINT; diff --git a/arch/powerpc/platforms/85xx/ge_imp3a.c b/arch/powerpc/platforms/85xx/ge_imp3a.c new file mode 100644 index 00000000000..d50056f424f --- /dev/null +++ b/arch/powerpc/platforms/85xx/ge_imp3a.c @@ -0,0 +1,246 @@ +/* + * GE IMP3A Board Setup + * + * Author Martyn Welch <martyn.welch@ge.com> + * + * Copyright 2010 GE Intelligent Platforms Embedded Systems, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Based on: mpc85xx_ds.c (MPC85xx DS Board Setup) + * Copyright 2007 Freescale Semiconductor Inc. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/interrupt.h> +#include <linux/of_platform.h> +#include <linux/memblock.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <mm/mmu_decl.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/swiotlb.h> +#include <asm/nvram.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" +#include <sysdev/ge/ge_pic.h> + +void __iomem *imp3a_regs; + +void __init ge_imp3a_pic_init(void) +{ + struct mpic *mpic; + struct device_node *np; + struct device_node *cascade_node = NULL; + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { + mpic = mpic_alloc(NULL, 0, + MPIC_NO_RESET | + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } else { + mpic = mpic_alloc(NULL, 0, + MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + } + + BUG_ON(mpic == NULL); + mpic_init(mpic); + /* + * There is a simple interrupt handler in the main FPGA, this needs + * to be cascaded into the MPIC + */ + for_each_node_by_type(np, "interrupt-controller") + if (of_device_is_compatible(np, "gef,fpga-pic-1.00")) { + cascade_node = np; + break; + } + + if (cascade_node == NULL) { + printk(KERN_WARNING "IMP3A: No FPGA PIC\n"); + return; + } + + gef_pic_init(cascade_node); + of_node_put(cascade_node); +} + +#ifdef CONFIG_PCI +static int primary_phb_addr; +#endif /* CONFIG_PCI */ + +/* + * Setup the architecture + */ +static void __init ge_imp3a_setup_arch(void) +{ + struct device_node *regs; +#ifdef CONFIG_PCI + struct device_node *np; + struct pci_controller *hose; +#endif + dma_addr_t max = 0xffffffff; + + if (ppc_md.progress) + ppc_md.progress("ge_imp3a_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8540-pci") || + of_device_is_compatible(np, "fsl,mpc8548-pcie") || + of_device_is_compatible(np, "fsl,p2020-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == primary_phb_addr) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + + hose = pci_find_hose_for_OF_device(np); + max = min(max, hose->dma_window_base_cur + + hose->dma_window_size); + } + } +#endif + + mpc85xx_smp_init(); + +#ifdef CONFIG_SWIOTLB + if (memblock_end_of_DRAM() > max) { + ppc_swiotlb_enable = 1; + set_pci_dma_ops(&swiotlb_dma_ops); + ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb; + } +#endif + + /* Remap basic board registers */ + regs = of_find_compatible_node(NULL, NULL, "ge,imp3a-fpga-regs"); + if (regs) { + imp3a_regs = of_iomap(regs, 0); + if (imp3a_regs == NULL) + printk(KERN_WARNING "Unable to map board registers\n"); + of_node_put(regs); + } + +#if defined(CONFIG_MMIO_NVRAM) + mmio_nvram_init(); +#endif + + printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n"); +} + +/* Return the PCB revision */ +static unsigned int ge_imp3a_get_pcb_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs); + return (reg >> 8) & 0xff; +} + +/* Return the board (software) revision */ +static unsigned int ge_imp3a_get_board_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return reg & 0xff; +} + +/* Return the FPGA revision */ +static unsigned int ge_imp3a_get_fpga_rev(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x2); + return (reg >> 8) & 0xff; +} + +/* Return compactPCI Geographical Address */ +static unsigned int ge_imp3a_get_cpci_geo_addr(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return (reg & 0x0f00) >> 8; +} + +/* Return compactPCI System Controller Status */ +static unsigned int ge_imp3a_get_cpci_is_syscon(void) +{ + unsigned int reg; + + reg = ioread16(imp3a_regs + 0x6); + return reg & (1 << 12); +} + +static void ge_imp3a_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "Vendor\t\t: GE Intelligent Platforms\n"); + + seq_printf(m, "Revision\t: %u%c\n", ge_imp3a_get_pcb_rev(), + ('A' + ge_imp3a_get_board_rev() - 1)); + + seq_printf(m, "FPGA Revision\t: %u\n", ge_imp3a_get_fpga_rev()); + + seq_printf(m, "cPCI geo. addr\t: %u\n", ge_imp3a_get_cpci_geo_addr()); + + seq_printf(m, "cPCI syscon\t: %s\n", + ge_imp3a_get_cpci_is_syscon() ? "yes" : "no"); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init ge_imp3a_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "ge,IMP3A")) { +#ifdef CONFIG_PCI + primary_phb_addr = 0x9000; +#endif + return 1; + } + + return 0; +} + +machine_device_initcall(ge_imp3a, mpc85xx_common_publish_devices); + +machine_arch_initcall(ge_imp3a, swiotlb_setup_bus_notifier); + +define_machine(ge_imp3a) { + .name = "GE_IMP3A", + .probe = ge_imp3a_probe, + .setup_arch = ge_imp3a_setup_arch, + .init_IRQ = ge_imp3a_pic_init, + .show_cpuinfo = ge_imp3a_show_cpuinfo, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 20f75d7819c..60120e55da4 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -57,8 +57,7 @@ static void machine_restart(char *cmd) static void __init ksi8560_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/mpc8536_ds.c b/arch/powerpc/platforms/85xx/mpc8536_ds.c index cf266826682..f58872688d8 100644 --- a/arch/powerpc/platforms/85xx/mpc8536_ds.c +++ b/arch/powerpc/platforms/85xx/mpc8536_ds.c @@ -36,9 +36,7 @@ void __init mpc8536_ds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 3bebb5173bf..d19f675cb36 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -50,8 +50,7 @@ static int mpc85xx_exclude_device(struct pci_controller *hose, static void __init mpc85xx_ads_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 40f03da616a..ab5f0bf1945 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -3,7 +3,7 @@ * * Maintained by Kumar Gala (see MAINTAINERS for contact information) * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005, 2011-2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -48,17 +48,24 @@ #include "mpc85xx.h" -/* CADMUS info */ -/* xxx - galak, move into device tree */ -#define CADMUS_BASE (0xf8004000) -#define CADMUS_SIZE (256) -#define CM_VER (0) -#define CM_CSR (1) -#define CM_RST (2) - +/* + * The CDS board contains an FPGA/CPLD called "Cadmus", which collects + * various logic and performs system control functions. + * Here is the FPGA/CPLD register map. + */ +struct cadmus_reg { + u8 cm_ver; /* Board version */ + u8 cm_csr; /* General control/status */ + u8 cm_rst; /* Reset control */ + u8 cm_hsclk; /* High speed clock */ + u8 cm_hsxclk; /* High speed clock extended */ + u8 cm_led; /* LED data */ + u8 cm_pci; /* PCI control/status */ + u8 cm_dma; /* DMA control */ + u8 res[248]; /* Total 256 bytes */ +}; -static int cds_pci_slot = 2; -static volatile u8 *cadmus; +static struct cadmus_reg *cadmus; #ifdef CONFIG_PCI @@ -158,6 +165,33 @@ DECLARE_PCI_FIXUP_EARLY(0x1957, 0x3fff, skip_fake_bridge); DECLARE_PCI_FIXUP_EARLY(0x3fff, 0x1957, skip_fake_bridge); DECLARE_PCI_FIXUP_EARLY(0xff3f, 0x5719, skip_fake_bridge); +#define PCI_DEVICE_ID_IDT_TSI310 0x01a7 + +/* + * Fix Tsi310 PCI-X bridge resource. + * Force the bridge to open a window from 0x0000-0x1fff in PCI I/O space. + * This allows legacy I/O(i8259, etc) on the VIA southbridge to be accessed. + */ +void mpc85xx_cds_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev = bus->self; + struct resource *res = bus->resource[0]; + + if (dev != NULL && + dev->vendor == PCI_VENDOR_ID_IBM && + dev->device == PCI_DEVICE_ID_IDT_TSI310) { + if (res) { + res->start = 0; + res->end = 0x1fff; + res->flags = IORESOURCE_IO; + pr_info("mpc85xx_cds: PCI bridge resource fixup applied\n"); + pr_info("mpc85xx_cds: %pR\n", res); + } + } + + fsl_pcibios_fixup_bus(bus); +} + #ifdef CONFIG_PPC_I8259 static void mpc85xx_8259_cascade_handler(unsigned int irq, struct irq_desc *desc) @@ -188,8 +222,7 @@ static struct irqaction mpc85xxcds_8259_irqaction = { static void __init mpc85xx_cds_pic_init(void) { struct mpic *mpic; - mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); @@ -249,20 +282,30 @@ machine_device_initcall(mpc85xx_cds, mpc85xx_cds_8259_attach); */ static void __init mpc85xx_cds_setup_arch(void) { -#ifdef CONFIG_PCI struct device_node *np; -#endif + int cds_pci_slot; if (ppc_md.progress) ppc_md.progress("mpc85xx_cds_setup_arch()", 0); - cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); - cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; + np = of_find_compatible_node(NULL, NULL, "fsl,mpc8548cds-fpga"); + if (!np) { + pr_err("Could not find FPGA node.\n"); + return; + } + + cadmus = of_iomap(np, 0); + of_node_put(np); + if (!cadmus) { + pr_err("Fail to map FPGA area.\n"); + return; + } if (ppc_md.progress) { char buf[40]; + cds_pci_slot = ((in_8(&cadmus->cm_csr) >> 6) & 0x3) + 1; snprintf(buf, 40, "CDS Version = 0x%x in slot %d\n", - cadmus[CM_VER], cds_pci_slot); + in_8(&cadmus->cm_ver), cds_pci_slot); ppc_md.progress(buf, 0); } @@ -292,7 +335,8 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); - seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", cadmus[CM_VER]); + seq_printf(m, "Machine\t\t: MPC85xx CDS (0x%x)\n", + in_8(&cadmus->cm_ver)); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); @@ -323,7 +367,7 @@ define_machine(mpc85xx_cds) { .get_irq = mpic_get_irq, #ifdef CONFIG_PCI .restart = mpc85xx_cds_restart, - .pcibios_fixup_bus = fsl_pcibios_fixup_bus, + .pcibios_fixup_bus = mpc85xx_cds_fixup_bus, #else .restart = fsl_rstcr_restart, #endif diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c index eefbb91e1d6..6e23e3e34bd 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c @@ -72,13 +72,13 @@ void __init mpc85xx_ds_pic_init(void) if (of_flat_dt_is_compatible(root, "fsl,MPC8572DS-CAMP")) { mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_NO_RESET | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index 1d15a0cd2c8..f33662b46b8 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -1,5 +1,6 @@ /* - * Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved. + * Copyright (C) 2006-2010, 2012 Freescale Semicondutor, Inc. + * All rights reserved. * * Author: Andy Fleming <afleming@freescale.com> * @@ -51,6 +52,7 @@ #include <asm/qe_ic.h> #include <asm/mpic.h> #include <asm/swiotlb.h> +#include <asm/fsl_guts.h> #include "smp.h" #include "mpc85xx.h" @@ -268,34 +270,27 @@ static void __init mpc85xx_mds_qe_init(void) mpc85xx_mds_reset_ucc_phys(); if (machine_is(p1021_mds)) { -#define MPC85xx_PMUXCR_OFFSET 0x60 -#define MPC85xx_PMUXCR_QE0 0x00008000 -#define MPC85xx_PMUXCR_QE3 0x00001000 -#define MPC85xx_PMUXCR_QE9 0x00000040 -#define MPC85xx_PMUXCR_QE12 0x00000008 - static __be32 __iomem *pmuxcr; - np = of_find_node_by_name(NULL, "global-utilities"); + struct ccsr_guts_85xx __iomem *guts; + np = of_find_node_by_name(NULL, "global-utilities"); if (np) { - pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET; - - if (!pmuxcr) - printk(KERN_EMERG "Error: Alternate function" - " signal multiplex control register not" - " mapped!\n"); - else + guts = of_iomap(np, 0); + if (!guts) + pr_err("mpc85xx-rdb: could not map global utilities register\n"); + else{ /* P1021 has pins muxed for QE and other functions. To * enable QE UEC mode, we need to set bit QE0 for UCC1 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 * and QE12 for QE MII management signals in PMUXCR * register. */ - setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 | - MPC85xx_PMUXCR_QE3 | - MPC85xx_PMUXCR_QE9 | - MPC85xx_PMUXCR_QE12); - + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + } of_node_put(np); } @@ -434,9 +429,8 @@ machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier); static void __init mpc85xx_mds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c index ccf520e890b..db214cd4c82 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_rdb.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_rdb.c @@ -1,7 +1,7 @@ /* * MPC85xx RDB Board Setup * - * Copyright 2009 Freescale Semiconductor Inc. + * Copyright 2009,2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -26,6 +26,9 @@ #include <asm/prom.h> #include <asm/udbg.h> #include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> @@ -47,21 +50,36 @@ void __init mpc85xx_rdb_pic_init(void) struct mpic *mpic; unsigned long root = of_get_flat_dt_root(); +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + if (of_flat_dt_is_compatible(root, "fsl,MPC85XXRDB-CAMP")) { - mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + mpic = mpic_alloc(NULL, 0, MPIC_NO_RESET | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } else { mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); } BUG_ON(mpic == NULL); mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + + } else + pr_err("%s: Could not find qe-ic node\n", __func__); +#endif + } /* @@ -69,7 +87,7 @@ void __init mpc85xx_rdb_pic_init(void) */ static void __init mpc85xx_rdb_setup_arch(void) { -#ifdef CONFIG_PCI +#if defined(CONFIG_PCI) || defined(CONFIG_QUICC_ENGINE) struct device_node *np; #endif @@ -85,11 +103,73 @@ static void __init mpc85xx_rdb_setup_arch(void) #endif mpc85xx_smp_init(); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe"); + if (!np) { + pr_err("%s: Could not find Quicc Engine node\n", __func__); + goto qe_fail; + } + + qe_reset(); + of_node_put(np); + + np = of_find_node_by_name(NULL, "par_io"); + if (np) { + struct device_node *ucc; + + par_io_init(np); + of_node_put(np); + + for_each_node_by_name(ucc, "ucc") + par_io_of_config(ucc); + + } +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(p1025_rdb)) { + + struct ccsr_guts_85xx __iomem *guts; + + np = of_find_node_by_name(NULL, "global-utilities"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) { + + pr_err("mpc85xx-rdb: could not map global utilities register\n"); + + } else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management singals in PMUXCR + * register. + */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + } + of_node_put(np); + } + + } +#endif + +qe_fail: +#endif /* CONFIG_QUICC_ENGINE */ + printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n"); } machine_device_initcall(p2020_rdb, mpc85xx_common_publish_devices); +machine_device_initcall(p2020_rdb_pc, mpc85xx_common_publish_devices); +machine_device_initcall(p1020_mbg_pc, mpc85xx_common_publish_devices); machine_device_initcall(p1020_rdb, mpc85xx_common_publish_devices); +machine_device_initcall(p1020_rdb_pc, mpc85xx_common_publish_devices); +machine_device_initcall(p1020_utm_pc, mpc85xx_common_publish_devices); +machine_device_initcall(p1021_rdb_pc, mpc85xx_common_publish_devices); +machine_device_initcall(p1025_rdb, mpc85xx_common_publish_devices); /* * Called very early, device-tree isn't unflattened @@ -112,6 +192,52 @@ static int __init p1020_rdb_probe(void) return 0; } +static int __init p1020_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020RDB-PC"); +} + +static int __init p1021_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P1021RDB-PC")) + return 1; + return 0; +} + +static int __init p2020_rdb_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,P2020RDB-PC")) + return 1; + return 0; +} + +static int __init p1025_rdb_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1025RDB"); +} + +static int __init p1020_mbg_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020MBG-PC"); +} + +static int __init p1020_utm_pc_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,P1020UTM-PC"); +} + define_machine(p2020_rdb) { .name = "P2020 RDB", .probe = p2020_rdb_probe, @@ -139,3 +265,87 @@ define_machine(p1020_rdb) { .calibrate_decr = generic_calibrate_decr, .progress = udbg_progress, }; + +define_machine(p1021_rdb_pc) { + .name = "P1021 RDB-PC", + .probe = p1021_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p2020_rdb_pc) { + .name = "P2020RDB-PC", + .probe = p2020_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1025_rdb) { + .name = "P1025 RDB", + .probe = p1025_rdb_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_mbg_pc) { + .name = "P1020 MBG-PC", + .probe = p1020_mbg_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_utm_pc) { + .name = "P1020 UTM-PC", + .probe = p1020_utm_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; + +define_machine(p1020_rdb_pc) { + .name = "P1020RDB-PC", + .probe = p1020_rdb_pc_probe, + .setup_arch = mpc85xx_rdb_setup_arch, + .init_IRQ = mpc85xx_rdb_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; diff --git a/arch/powerpc/platforms/85xx/p1010rdb.c b/arch/powerpc/platforms/85xx/p1010rdb.c index 538bc3f57e9..d8bd6563d9c 100644 --- a/arch/powerpc/platforms/85xx/p1010rdb.c +++ b/arch/powerpc/platforms/85xx/p1010rdb.c @@ -32,9 +32,8 @@ void __init p1010_rdb_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index b0984ada3f8..0fe88e39945 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -33,6 +33,10 @@ #if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) +#define PMUXCR_ELBCDIU_MASK 0xc0000000 +#define PMUXCR_ELBCDIU_NOR16 0x80000000 +#define PMUXCR_ELBCDIU_DIU 0x40000000 + /* * Board-specific initialization of the DIU. This code should probably be * executed when the DIU is opened, rather than in arch code, but the DIU @@ -50,11 +54,22 @@ #define CLKDVDR_PXCLK_MASK 0x00FF0000 /* Some ngPIXIS register definitions */ +#define PX_CTL 3 +#define PX_BRDCFG0 8 +#define PX_BRDCFG1 9 + +#define PX_BRDCFG0_ELBC_SPI_MASK 0xc0 +#define PX_BRDCFG0_ELBC_SPI_ELBC 0x00 +#define PX_BRDCFG0_ELBC_SPI_NULL 0xc0 +#define PX_BRDCFG0_ELBC_DIU 0x02 + #define PX_BRDCFG1_DVIEN 0x80 #define PX_BRDCFG1_DFPEN 0x40 #define PX_BRDCFG1_BACKLIGHT 0x20 #define PX_BRDCFG1_DDCEN 0x10 +#define PX_CTL_ALTACC 0x80 + /* * DIU Area Descriptor * @@ -133,44 +148,117 @@ static void p1022ds_set_gamma_table(enum fsl_diu_monitor_port port, */ static void p1022ds_set_monitor_port(enum fsl_diu_monitor_port port) { - struct device_node *np; - void __iomem *pixis; - u8 __iomem *brdcfg1; - - np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga"); - if (!np) - /* older device trees used "fsl,p1022ds-pixis" */ - np = of_find_compatible_node(NULL, NULL, "fsl,p1022ds-pixis"); - if (!np) { - pr_err("p1022ds: missing ngPIXIS node\n"); + struct device_node *guts_node; + struct device_node *indirect_node = NULL; + struct ccsr_guts_85xx __iomem *guts; + u8 __iomem *lbc_lcs0_ba = NULL; + u8 __iomem *lbc_lcs1_ba = NULL; + u8 b; + + /* Map the global utilities registers. */ + guts_node = of_find_compatible_node(NULL, NULL, "fsl,p1022-guts"); + if (!guts_node) { + pr_err("p1022ds: missing global utilties device node\n"); return; } - pixis = of_iomap(np, 0); - if (!pixis) { - pr_err("p1022ds: could not map ngPIXIS registers\n"); - return; + guts = of_iomap(guts_node, 0); + if (!guts) { + pr_err("p1022ds: could not map global utilties device\n"); + goto exit; } - brdcfg1 = pixis + 9; /* BRDCFG1 is at offset 9 in the ngPIXIS */ + + indirect_node = of_find_compatible_node(NULL, NULL, + "fsl,p1022ds-indirect-pixis"); + if (!indirect_node) { + pr_err("p1022ds: missing pixis indirect mode node\n"); + goto exit; + } + + lbc_lcs0_ba = of_iomap(indirect_node, 0); + if (!lbc_lcs0_ba) { + pr_err("p1022ds: could not map localbus chip select 0\n"); + goto exit; + } + + lbc_lcs1_ba = of_iomap(indirect_node, 1); + if (!lbc_lcs1_ba) { + pr_err("p1022ds: could not map localbus chip select 1\n"); + goto exit; + } + + /* Make sure we're in indirect mode first. */ + if ((in_be32(&guts->pmuxcr) & PMUXCR_ELBCDIU_MASK) != + PMUXCR_ELBCDIU_DIU) { + struct device_node *pixis_node; + void __iomem *pixis; + + pixis_node = + of_find_compatible_node(NULL, NULL, "fsl,p1022ds-fpga"); + if (!pixis_node) { + pr_err("p1022ds: missing pixis node\n"); + goto exit; + } + + pixis = of_iomap(pixis_node, 0); + of_node_put(pixis_node); + if (!pixis) { + pr_err("p1022ds: could not map pixis registers\n"); + goto exit; + } + + /* Enable indirect PIXIS mode. */ + setbits8(pixis + PX_CTL, PX_CTL_ALTACC); + iounmap(pixis); + + /* Switch the board mux to the DIU */ + out_8(lbc_lcs0_ba, PX_BRDCFG0); /* BRDCFG0 */ + b = in_8(lbc_lcs1_ba); + b |= PX_BRDCFG0_ELBC_DIU; + out_8(lbc_lcs1_ba, b); + + /* Set the chip mux to DIU mode. */ + clrsetbits_be32(&guts->pmuxcr, PMUXCR_ELBCDIU_MASK, + PMUXCR_ELBCDIU_DIU); + in_be32(&guts->pmuxcr); + } + switch (port) { case FSL_DIU_PORT_DVI: - printk(KERN_INFO "%s:%u\n", __func__, __LINE__); /* Enable the DVI port, disable the DFP and the backlight */ - clrsetbits_8(brdcfg1, PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT, - PX_BRDCFG1_DVIEN); + out_8(lbc_lcs0_ba, PX_BRDCFG1); + b = in_8(lbc_lcs1_ba); + b &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); + b |= PX_BRDCFG1_DVIEN; + out_8(lbc_lcs1_ba, b); break; case FSL_DIU_PORT_LVDS: - printk(KERN_INFO "%s:%u\n", __func__, __LINE__); + /* + * LVDS also needs backlight enabled, otherwise the display + * will be blank. + */ /* Enable the DFP port, disable the DVI and the backlight */ - clrsetbits_8(brdcfg1, PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT, - PX_BRDCFG1_DFPEN); + out_8(lbc_lcs0_ba, PX_BRDCFG1); + b = in_8(lbc_lcs1_ba); + b &= ~PX_BRDCFG1_DVIEN; + b |= PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT; + out_8(lbc_lcs1_ba, b); break; default: pr_err("p1022ds: unsupported monitor port %i\n", port); } - iounmap(pixis); +exit: + if (lbc_lcs1_ba) + iounmap(lbc_lcs1_ba); + if (lbc_lcs0_ba) + iounmap(lbc_lcs0_ba); + if (guts) + iounmap(guts); + + of_node_put(indirect_node); + of_node_put(guts_node); } /** @@ -242,15 +330,56 @@ p1022ds_valid_monitor_port(enum fsl_diu_monitor_port port) void __init p1022_ds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS | + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); } +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* + * Disables a node in the device tree. + * + * This function is called before kmalloc() is available, so the 'new' object + * should be allocated in the global area. The easiest way is to do that is + * to allocate one static local variable for each call to this function. + */ +static void __init disable_one_node(struct device_node *np, struct property *new) +{ + struct property *old; + + old = of_find_property(np, new->name, NULL); + if (old) + prom_update_property(np, new, old); + else + prom_add_property(np, new); +} + +/* TRUE if there is a "video=fslfb" command-line parameter. */ +static bool fslfb; + +/* + * Search for a "video=fslfb" command-line parameter, and set 'fslfb' to + * true if we find it. + * + * We need to use early_param() instead of __setup() because the normal + * __setup() gets called to late. However, early_param() gets called very + * early, before the device tree is unflattened, so all we can do now is set a + * global variable. Later on, p1022_ds_setup_arch() will use that variable + * to determine if we need to update the device tree. + */ +static int __init early_video_setup(char *options) +{ + fslfb = (strncmp(options, "fslfb:", 6) == 0); + + return 0; +} +early_param("video", early_video_setup); + +#endif + /* * Setup the architecture */ @@ -288,6 +417,34 @@ static void __init p1022_ds_setup_arch(void) diu_ops.set_monitor_port = p1022ds_set_monitor_port; diu_ops.set_pixel_clock = p1022ds_set_pixel_clock; diu_ops.valid_monitor_port = p1022ds_valid_monitor_port; + + /* + * Disable the NOR flash node if there is video=fslfb... command-line + * parameter. When the DIU is active, NOR flash is unavailable, so we + * have to disable the node before the MTD driver loads. + */ + if (fslfb) { + struct device_node *np = + of_find_compatible_node(NULL, NULL, "fsl,p1022-elbc"); + + if (np) { + np = of_find_compatible_node(np, NULL, "cfi-flash"); + if (np) { + static struct property nor_status = { + .name = "status", + .value = "disabled", + .length = sizeof("disabled"), + }; + + pr_info("p1022ds: disabling %s node", + np->full_name); + disable_one_node(np, &nor_status); + of_node_put(np); + } + } + + } + #endif mpc85xx_smp_init(); diff --git a/arch/powerpc/platforms/85xx/p1023_rds.c b/arch/powerpc/platforms/85xx/p1023_rds.c index d951e7027bb..6b07398e436 100644 --- a/arch/powerpc/platforms/85xx/p1023_rds.c +++ b/arch/powerpc/platforms/85xx/p1023_rds.c @@ -93,9 +93,8 @@ machine_device_initcall(p1023_rds, mpc85xx_common_publish_devices); static void __init mpc85xx_rds_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index 184a5078461..1677b8a2267 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -54,8 +54,7 @@ static int sbc_rev; static void __init sbc8548_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 940752e9305..3c3bbcc2756 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -41,8 +41,7 @@ static void __init sbc8560_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/socrates.c b/arch/powerpc/platforms/85xx/socrates.c index 18f635906b2..b7191921775 100644 --- a/arch/powerpc/platforms/85xx/socrates.c +++ b/arch/powerpc/platforms/85xx/socrates.c @@ -48,8 +48,7 @@ static void __init socrates_pic_init(void) { struct device_node *np; - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index e9e5234b4e7..27ca3a7b04a 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -48,8 +48,7 @@ static void __init stx_gp3_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index bf7c89fb75b..d7504cefe01 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -47,7 +47,7 @@ static void __init tqm85xx_pic_init(void) { struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN, + MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/85xx/xes_mpc85xx.c b/arch/powerpc/platforms/85xx/xes_mpc85xx.c index 3a69f8b77de..503c21596c6 100644 --- a/arch/powerpc/platforms/85xx/xes_mpc85xx.c +++ b/arch/powerpc/platforms/85xx/xes_mpc85xx.c @@ -43,9 +43,7 @@ void __init xes_mpc85xx_pic_init(void) { - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | - MPIC_BIG_ENDIAN | MPIC_BROKEN_FRR_NIRQS, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN, 0, 256, " OpenPIC "); BUG_ON(mpic == NULL); mpic_init(mpic); diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index 8d6599d54ea..7a6279e3821 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -39,6 +39,7 @@ config GEF_PPC9A select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select GE_FPGA help This option enables support for the GE PPC9A. @@ -48,6 +49,7 @@ config GEF_SBC310 select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select GE_FPGA help This option enables support for the GE SBC310. @@ -57,6 +59,7 @@ config GEF_SBC610 select MMIO_NVRAM select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select GE_FPGA select HAS_RAPIDIO help This option enables support for the GE SBC610. diff --git a/arch/powerpc/platforms/86xx/Makefile b/arch/powerpc/platforms/86xx/Makefile index 4b0d7b1aa00..ede815d6489 100644 --- a/arch/powerpc/platforms/86xx/Makefile +++ b/arch/powerpc/platforms/86xx/Makefile @@ -7,7 +7,6 @@ obj-$(CONFIG_SMP) += mpc86xx_smp.o obj-$(CONFIG_MPC8641_HPCN) += mpc86xx_hpcn.o obj-$(CONFIG_SBC8641D) += sbc8641d.o obj-$(CONFIG_MPC8610_HPCD) += mpc8610_hpcd.o -gef-gpio-$(CONFIG_GPIOLIB) += gef_gpio.o -obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o gef_pic.o $(gef-gpio-y) -obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o gef_pic.o $(gef-gpio-y) -obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o gef_pic.o $(gef-gpio-y) +obj-$(CONFIG_GEF_SBC610) += gef_sbc610.o +obj-$(CONFIG_GEF_SBC310) += gef_sbc310.o +obj-$(CONFIG_GEF_PPC9A) += gef_ppc9a.o diff --git a/arch/powerpc/platforms/86xx/gef_gpio.c b/arch/powerpc/platforms/86xx/gef_gpio.c deleted file mode 100644 index 2a703365e66..00000000000 --- a/arch/powerpc/platforms/86xx/gef_gpio.c +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Driver for GE FPGA based GPIO - * - * Author: Martyn Welch <martyn.welch@ge.com> - * - * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/* TODO - * - * Configuration of output modes (totem-pole/open-drain) - * Interrupt configuration - interrupts are always generated the FPGA relies on - * the I/O interrupt controllers mask to stop them propergating - */ - -#include <linux/kernel.h> -#include <linux/compiler.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/of.h> -#include <linux/of_device.h> -#include <linux/of_platform.h> -#include <linux/of_gpio.h> -#include <linux/gpio.h> -#include <linux/slab.h> -#include <linux/module.h> - -#define GEF_GPIO_DIRECT 0x00 -#define GEF_GPIO_IN 0x04 -#define GEF_GPIO_OUT 0x08 -#define GEF_GPIO_TRIG 0x0C -#define GEF_GPIO_POLAR_A 0x10 -#define GEF_GPIO_POLAR_B 0x14 -#define GEF_GPIO_INT_STAT 0x18 -#define GEF_GPIO_OVERRUN 0x1C -#define GEF_GPIO_MODE 0x20 - -static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) -{ - unsigned int data; - - data = ioread32be(reg); - /* value: 0=low; 1=high */ - if (value & 0x1) - data = data | (0x1 << offset); - else - data = data & ~(0x1 << offset); - - iowrite32be(data, reg); -} - - -static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) -{ - unsigned int data; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); - data = data | (0x1 << offset); - iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); - - return 0; -} - -static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) -{ - unsigned int data; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - /* Set direction before switching to input */ - _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); - - data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); - data = data & ~(0x1 << offset); - iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); - - return 0; -} - -static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - unsigned int data; - int state = 0; - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - data = ioread32be(mmchip->regs + GEF_GPIO_IN); - state = (int)((data >> offset) & 0x1); - - return state; -} - -static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); - - _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); -} - -static int __init gef_gpio_init(void) -{ - struct device_node *np; - int retval; - struct of_mm_gpio_chip *gef_gpio_chip; - - for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { - - pr_debug("%s: Initialising GEF GPIO\n", np->full_name); - - /* Allocate chip structure */ - gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); - if (!gef_gpio_chip) { - pr_err("%s: Unable to allocate structure\n", - np->full_name); - continue; - } - - /* Setup pointers to chip functions */ - gef_gpio_chip->gc.of_gpio_n_cells = 2; - gef_gpio_chip->gc.ngpio = 19; - gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->gc.get = gef_gpio_get; - gef_gpio_chip->gc.set = gef_gpio_set; - - /* This function adds a memory mapped GPIO chip */ - retval = of_mm_gpiochip_add(np, gef_gpio_chip); - if (retval) { - kfree(gef_gpio_chip); - pr_err("%s: Unable to add GPIO\n", np->full_name); - } - } - - for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { - - pr_debug("%s: Initialising GEF GPIO\n", np->full_name); - - /* Allocate chip structure */ - gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); - if (!gef_gpio_chip) { - pr_err("%s: Unable to allocate structure\n", - np->full_name); - continue; - } - - /* Setup pointers to chip functions */ - gef_gpio_chip->gc.of_gpio_n_cells = 2; - gef_gpio_chip->gc.ngpio = 6; - gef_gpio_chip->gc.direction_input = gef_gpio_dir_in; - gef_gpio_chip->gc.direction_output = gef_gpio_dir_out; - gef_gpio_chip->gc.get = gef_gpio_get; - gef_gpio_chip->gc.set = gef_gpio_set; - - /* This function adds a memory mapped GPIO chip */ - retval = of_mm_gpiochip_add(np, gef_gpio_chip); - if (retval) { - kfree(gef_gpio_chip); - pr_err("%s: Unable to add GPIO\n", np->full_name); - } - } - - return 0; -}; -arch_initcall(gef_gpio_init); - -MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); -MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); -MODULE_LICENSE("GPL"); diff --git a/arch/powerpc/platforms/86xx/gef_ppc9a.c b/arch/powerpc/platforms/86xx/gef_ppc9a.c index 60ce07e3910..ed58b6cfd60 100644 --- a/arch/powerpc/platforms/86xx/gef_ppc9a.c +++ b/arch/powerpc/platforms/86xx/gef_ppc9a.c @@ -37,9 +37,9 @@ #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> +#include <sysdev/ge/ge_pic.h> #include "mpc86xx.h" -#include "gef_pic.h" #undef DEBUG diff --git a/arch/powerpc/platforms/86xx/gef_sbc310.c b/arch/powerpc/platforms/86xx/gef_sbc310.c index 3ecee25bf3e..710db69bd52 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc310.c +++ b/arch/powerpc/platforms/86xx/gef_sbc310.c @@ -37,9 +37,9 @@ #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> +#include <sysdev/ge/ge_pic.h> #include "mpc86xx.h" -#include "gef_pic.h" #undef DEBUG diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 5090d608d9e..4a13d2f4ac2 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -37,9 +37,9 @@ #include <sysdev/fsl_pci.h> #include <sysdev/fsl_soc.h> +#include <sysdev/ge/ge_pic.h> #include "mpc86xx.h" -#include "gef_pic.h" #undef DEBUG diff --git a/arch/powerpc/platforms/86xx/pic.c b/arch/powerpc/platforms/86xx/pic.c index 52bbfa03153..22cc3571ae1 100644 --- a/arch/powerpc/platforms/86xx/pic.c +++ b/arch/powerpc/platforms/86xx/pic.c @@ -37,9 +37,8 @@ void __init mpc86xx_init_irq(void) int cascade_irq; #endif - struct mpic *mpic = mpic_alloc(NULL, 0, - MPIC_WANTS_RESET | MPIC_BIG_ENDIAN | - MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU, + struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, 0, 256, " MPIC "); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 0cfb46d54b8..a35ca44ade6 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -2,7 +2,6 @@ menu "Platform support" source "arch/powerpc/platforms/powernv/Kconfig" source "arch/powerpc/platforms/pseries/Kconfig" -source "arch/powerpc/platforms/iseries/Kconfig" source "arch/powerpc/platforms/chrp/Kconfig" source "arch/powerpc/platforms/512x/Kconfig" source "arch/powerpc/platforms/52xx/Kconfig" @@ -87,6 +86,14 @@ config MPIC_WEIRD bool default n +config MPIC_MSGR + bool "MPIC message register support" + depends on MPIC + default n + help + Enables support for the MPIC message registers. These + registers are used for inter-processor communication. + config PPC_I8259 bool default n @@ -138,7 +145,7 @@ config MPIC_BROKEN_REGREAD of the register contents in software. config IBMVIO - depends on PPC_PSERIES || PPC_ISERIES + depends on PPC_PSERIES bool default y diff --git a/arch/powerpc/platforms/Makefile b/arch/powerpc/platforms/Makefile index 2635a22bade..879b4a44849 100644 --- a/arch/powerpc/platforms/Makefile +++ b/arch/powerpc/platforms/Makefile @@ -16,7 +16,6 @@ obj-$(CONFIG_FSL_SOC_BOOKE) += 85xx/ obj-$(CONFIG_PPC_86xx) += 86xx/ obj-$(CONFIG_PPC_POWERNV) += powernv/ obj-$(CONFIG_PPC_PSERIES) += pseries/ -obj-$(CONFIG_PPC_ISERIES) += iseries/ obj-$(CONFIG_PPC_MAPLE) += maple/ obj-$(CONFIG_PPC_PASEMI) += pasemi/ obj-$(CONFIG_PPC_CELL) += cell/ diff --git a/arch/powerpc/platforms/cell/setup.c b/arch/powerpc/platforms/cell/setup.c index 62002a7edfe..fa3e294fd34 100644 --- a/arch/powerpc/platforms/cell/setup.c +++ b/arch/powerpc/platforms/cell/setup.c @@ -197,7 +197,8 @@ static void __init mpic_init_IRQ(void) /* The MPIC driver will get everything it needs from the * device-tree, just pass 0 to all arguments */ - mpic = mpic_alloc(dn, 0, MPIC_SECONDARY, 0, 0, " MPIC "); + mpic = mpic_alloc(dn, 0, MPIC_SECONDARY | MPIC_NO_RESET, + 0, 0, " MPIC "); if (mpic == NULL) continue; mpic_init(mpic); diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 4a3d90e0d42..1d75c92ea8f 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -646,6 +646,7 @@ long spufs_create(struct path *path, struct dentry *dentry, out: mutex_unlock(&path->dentry->d_inode->i_mutex); + dput(dentry); return ret; } diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c index 8591bb62d7f..5665dcc382c 100644 --- a/arch/powerpc/platforms/cell/spufs/syscalls.c +++ b/arch/powerpc/platforms/cell/spufs/syscalls.c @@ -70,8 +70,6 @@ static long do_spu_create(const char __user *pathname, unsigned int flags, ret = PTR_ERR(dentry); if (!IS_ERR(dentry)) { ret = spufs_create(&path, dentry, flags, mode, neighbor); - mutex_unlock(&path.dentry->d_inode->i_mutex); - dput(dentry); path_put(&path); } diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index f1f17bb2c33..c665d7de6c9 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -435,7 +435,8 @@ static void __init chrp_find_openpic(void) if (len > 1) isu_size = iranges[3]; - chrp_mpic = mpic_alloc(np, opaddr, 0, isu_size, 0, " MPIC "); + chrp_mpic = mpic_alloc(np, opaddr, MPIC_NO_RESET, + isu_size, 0, " MPIC "); if (chrp_mpic == NULL) { printk(KERN_ERR "Failed to allocate MPIC structure\n"); goto bail; diff --git a/arch/powerpc/platforms/embedded6xx/holly.c b/arch/powerpc/platforms/embedded6xx/holly.c index 9cfcf20c056..ab51b21b4bd 100644 --- a/arch/powerpc/platforms/embedded6xx/holly.c +++ b/arch/powerpc/platforms/embedded6xx/holly.c @@ -154,11 +154,9 @@ static void __init holly_init_IRQ(void) struct device_node *cascade_node = NULL; #endif - mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 24, - NR_IRQS-4, /* num_sources used */ + 24, 0, "Tsi108_PIC"); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/embedded6xx/linkstation.c b/arch/powerpc/platforms/embedded6xx/linkstation.c index bcfad92c9ce..455e7c08742 100644 --- a/arch/powerpc/platforms/embedded6xx/linkstation.c +++ b/arch/powerpc/platforms/embedded6xx/linkstation.c @@ -82,8 +82,7 @@ static void __init linkstation_init_IRQ(void) { struct mpic *mpic; - mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET, - 4, 32, " EPIC "); + mpic = mpic_alloc(NULL, 0, 0, 4, 0, " EPIC "); BUG_ON(mpic == NULL); /* PCI IRQs */ diff --git a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c index f3350d786f5..74ccce36bae 100644 --- a/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c +++ b/arch/powerpc/platforms/embedded6xx/mpc7448_hpc2.c @@ -108,11 +108,9 @@ static void __init mpc7448_hpc2_init_IRQ(void) struct device_node *cascade_node = NULL; #endif - mpic = mpic_alloc(NULL, 0, - MPIC_BIG_ENDIAN | MPIC_WANTS_RESET | + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | MPIC_SPV_EOI | MPIC_NO_PTHROU_DIS | MPIC_REGSET_TSI108, - 24, - NR_IRQS-4, /* num_sources used */ + 24, 0, "Tsi108_PIC"); BUG_ON(mpic == NULL); diff --git a/arch/powerpc/platforms/embedded6xx/storcenter.c b/arch/powerpc/platforms/embedded6xx/storcenter.c index afa63883496..e0ed3c71d69 100644 --- a/arch/powerpc/platforms/embedded6xx/storcenter.c +++ b/arch/powerpc/platforms/embedded6xx/storcenter.c @@ -84,8 +84,7 @@ static void __init storcenter_init_IRQ(void) { struct mpic *mpic; - mpic = mpic_alloc(NULL, 0, MPIC_WANTS_RESET, - 16, 32, " OpenPIC "); + mpic = mpic_alloc(NULL, 0, 0, 16, 0, " OpenPIC "); BUG_ON(mpic == NULL); /* diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig deleted file mode 100644 index 63835e09e5c..00000000000 --- a/arch/powerpc/platforms/iseries/Kconfig +++ /dev/null @@ -1,39 +0,0 @@ -config PPC_ISERIES - bool "IBM Legacy iSeries" - depends on PPC64 && PPC_BOOK3S - select OF_DYNAMIC - select PPC_SMP_MUXED_IPI - select PPC_INDIRECT_PIO - select PPC_INDIRECT_MMIO - select PPC_PCI_CHOICE if EXPERT - -menu "iSeries device drivers" - depends on PPC_ISERIES - -config VIODASD - tristate "iSeries Virtual I/O disk support" - depends on BLOCK - select VIOPATH - help - If you are running on an iSeries system and you want to use - virtual disks created and managed by OS/400, say Y. - -config VIOCD - tristate "iSeries Virtual I/O CD support" - depends on BLOCK - select VIOPATH - help - If you are running Linux on an IBM iSeries system and you want to - read a CD drive owned by OS/400, say Y here. - -config VIOTAPE - tristate "iSeries Virtual Tape Support" - select VIOPATH - help - If you are running Linux on an iSeries system and you want Linux - to read and/or write a tape drive owned by OS/400, say Y here. - -endmenu - -config VIOPATH - bool diff --git a/arch/powerpc/platforms/iseries/Makefile b/arch/powerpc/platforms/iseries/Makefile deleted file mode 100644 index a7602b11ed9..00000000000 --- a/arch/powerpc/platforms/iseries/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -ccflags-y := -mno-minimal-toc - -obj-y += exception.o -obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o dt.o mf.o lpevents.o \ - hvcall.o proc.o htab.o iommu.o misc.o irq.o -obj-$(CONFIG_PCI) += pci.o -obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_VIOPATH) += viopath.o vio.o -obj-$(CONFIG_MODULES) += ksyms.o diff --git a/arch/powerpc/platforms/iseries/call_hpt.h b/arch/powerpc/platforms/iseries/call_hpt.h deleted file mode 100644 index 8d95fe4b554..00000000000 --- a/arch/powerpc/platforms/iseries/call_hpt.h +++ /dev/null @@ -1,102 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _PLATFORMS_ISERIES_CALL_HPT_H -#define _PLATFORMS_ISERIES_CALL_HPT_H - -/* - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> -#include <asm/mmu.h> - -#define HvCallHptGetHptAddress HvCallHpt + 0 -#define HvCallHptGetHptPages HvCallHpt + 1 -#define HvCallHptSetPp HvCallHpt + 5 -#define HvCallHptSetSwBits HvCallHpt + 6 -#define HvCallHptUpdate HvCallHpt + 7 -#define HvCallHptInvalidateNoSyncICache HvCallHpt + 8 -#define HvCallHptGet HvCallHpt + 11 -#define HvCallHptFindNextValid HvCallHpt + 12 -#define HvCallHptFindValid HvCallHpt + 13 -#define HvCallHptAddValidate HvCallHpt + 16 -#define HvCallHptInvalidateSetSwBitsGet HvCallHpt + 18 - - -static inline u64 HvCallHpt_getHptAddress(void) -{ - return HvCall0(HvCallHptGetHptAddress); -} - -static inline u64 HvCallHpt_getHptPages(void) -{ - return HvCall0(HvCallHptGetHptPages); -} - -static inline void HvCallHpt_setPp(u32 hpteIndex, u8 value) -{ - HvCall2(HvCallHptSetPp, hpteIndex, value); -} - -static inline void HvCallHpt_setSwBits(u32 hpteIndex, u8 bitson, u8 bitsoff) -{ - HvCall3(HvCallHptSetSwBits, hpteIndex, bitson, bitsoff); -} - -static inline void HvCallHpt_invalidateNoSyncICache(u32 hpteIndex) -{ - HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex); -} - -static inline u64 HvCallHpt_invalidateSetSwBitsGet(u32 hpteIndex, u8 bitson, - u8 bitsoff) -{ - u64 compressedStatus; - - compressedStatus = HvCall4(HvCallHptInvalidateSetSwBitsGet, - hpteIndex, bitson, bitsoff, 1); - HvCall1(HvCallHptInvalidateNoSyncICache, hpteIndex); - return compressedStatus; -} - -static inline u64 HvCallHpt_findValid(struct hash_pte *hpte, u64 vpn) -{ - return HvCall3Ret16(HvCallHptFindValid, hpte, vpn, 0, 0); -} - -static inline u64 HvCallHpt_findNextValid(struct hash_pte *hpte, u32 hpteIndex, - u8 bitson, u8 bitsoff) -{ - return HvCall3Ret16(HvCallHptFindNextValid, hpte, hpteIndex, - bitson, bitsoff); -} - -static inline void HvCallHpt_get(struct hash_pte *hpte, u32 hpteIndex) -{ - HvCall2Ret16(HvCallHptGet, hpte, hpteIndex, 0); -} - -static inline void HvCallHpt_addValidate(u32 hpteIndex, u32 hBit, - struct hash_pte *hpte) -{ - HvCall4(HvCallHptAddValidate, hpteIndex, hBit, hpte->v, hpte->r); -} - -#endif /* _PLATFORMS_ISERIES_CALL_HPT_H */ diff --git a/arch/powerpc/platforms/iseries/call_pci.h b/arch/powerpc/platforms/iseries/call_pci.h deleted file mode 100644 index dbdf69850ed..00000000000 --- a/arch/powerpc/platforms/iseries/call_pci.h +++ /dev/null @@ -1,309 +0,0 @@ -/* - * Provides the Hypervisor PCI calls for iSeries Linux Parition. - * Copyright (C) 2001 <Wayne G Holm> <IBM Corporation> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - * - * Change Activity: - * Created, Jan 9, 2001 - */ - -#ifndef _PLATFORMS_ISERIES_CALL_PCI_H -#define _PLATFORMS_ISERIES_CALL_PCI_H - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> - -/* - * DSA == Direct Select Address - * this struct must be 64 bits in total - */ -struct HvCallPci_DsaAddr { - u16 busNumber; /* PHB index? */ - u8 subBusNumber; /* PCI bus number? */ - u8 deviceId; /* device and function? */ - u8 barNumber; - u8 reserved[3]; -}; - -union HvDsaMap { - u64 DsaAddr; - struct HvCallPci_DsaAddr Dsa; -}; - -struct HvCallPci_LoadReturn { - u64 rc; - u64 value; -}; - -enum HvCallPci_DeviceType { - HvCallPci_NodeDevice = 1, - HvCallPci_SpDevice = 2, - HvCallPci_IopDevice = 3, - HvCallPci_BridgeDevice = 4, - HvCallPci_MultiFunctionDevice = 5, - HvCallPci_IoaDevice = 6 -}; - - -struct HvCallPci_DeviceInfo { - u32 deviceType; /* See DeviceType enum for values */ -}; - -struct HvCallPci_BusUnitInfo { - u32 sizeReturned; /* length of data returned */ - u32 deviceType; /* see DeviceType enum for values */ -}; - -struct HvCallPci_BridgeInfo { - struct HvCallPci_BusUnitInfo busUnitInfo; /* Generic bus unit info */ - u8 subBusNumber; /* Bus number of secondary bus */ - u8 maxAgents; /* Max idsels on secondary bus */ - u8 maxSubBusNumber; /* Max Sub Bus */ - u8 logicalSlotNumber; /* Logical Slot Number for IOA */ -}; - - -/* - * Maximum BusUnitInfo buffer size. Provided for clients so - * they can allocate a buffer big enough for any type of bus - * unit. Increase as needed. - */ -enum {HvCallPci_MaxBusUnitInfoSize = 128}; - -struct HvCallPci_BarParms { - u64 vaddr; - u64 raddr; - u64 size; - u64 protectStart; - u64 protectEnd; - u64 relocationOffset; - u64 pciAddress; - u64 reserved[3]; -}; - -enum HvCallPci_VpdType { - HvCallPci_BusVpd = 1, - HvCallPci_BusAdapterVpd = 2 -}; - -#define HvCallPciConfigLoad8 HvCallPci + 0 -#define HvCallPciConfigLoad16 HvCallPci + 1 -#define HvCallPciConfigLoad32 HvCallPci + 2 -#define HvCallPciConfigStore8 HvCallPci + 3 -#define HvCallPciConfigStore16 HvCallPci + 4 -#define HvCallPciConfigStore32 HvCallPci + 5 -#define HvCallPciEoi HvCallPci + 16 -#define HvCallPciGetBarParms HvCallPci + 18 -#define HvCallPciMaskFisr HvCallPci + 20 -#define HvCallPciUnmaskFisr HvCallPci + 21 -#define HvCallPciSetSlotReset HvCallPci + 25 -#define HvCallPciGetDeviceInfo HvCallPci + 27 -#define HvCallPciGetCardVpd HvCallPci + 28 -#define HvCallPciBarLoad8 HvCallPci + 40 -#define HvCallPciBarLoad16 HvCallPci + 41 -#define HvCallPciBarLoad32 HvCallPci + 42 -#define HvCallPciBarLoad64 HvCallPci + 43 -#define HvCallPciBarStore8 HvCallPci + 44 -#define HvCallPciBarStore16 HvCallPci + 45 -#define HvCallPciBarStore32 HvCallPci + 46 -#define HvCallPciBarStore64 HvCallPci + 47 -#define HvCallPciMaskInterrupts HvCallPci + 48 -#define HvCallPciUnmaskInterrupts HvCallPci + 49 -#define HvCallPciGetBusUnitInfo HvCallPci + 50 - -static inline u64 HvCallPci_configLoad16(u16 busNumber, u8 subBusNumber, - u8 deviceId, u32 offset, u16 *value) -{ - struct HvCallPci_DsaAddr dsa; - struct HvCallPci_LoadReturn retVal; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumber; - dsa.subBusNumber = subBusNumber; - dsa.deviceId = deviceId; - - HvCall3Ret16(HvCallPciConfigLoad16, &retVal, *(u64 *)&dsa, offset, 0); - - *value = retVal.value; - - return retVal.rc; -} - -static inline u64 HvCallPci_configLoad32(u16 busNumber, u8 subBusNumber, - u8 deviceId, u32 offset, u32 *value) -{ - struct HvCallPci_DsaAddr dsa; - struct HvCallPci_LoadReturn retVal; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumber; - dsa.subBusNumber = subBusNumber; - dsa.deviceId = deviceId; - - HvCall3Ret16(HvCallPciConfigLoad32, &retVal, *(u64 *)&dsa, offset, 0); - - *value = retVal.value; - - return retVal.rc; -} - -static inline u64 HvCallPci_configStore8(u16 busNumber, u8 subBusNumber, - u8 deviceId, u32 offset, u8 value) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumber; - dsa.subBusNumber = subBusNumber; - dsa.deviceId = deviceId; - - return HvCall4(HvCallPciConfigStore8, *(u64 *)&dsa, offset, value, 0); -} - -static inline u64 HvCallPci_eoi(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm) -{ - struct HvCallPci_DsaAddr dsa; - struct HvCallPci_LoadReturn retVal; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - HvCall1Ret16(HvCallPciEoi, &retVal, *(u64*)&dsa); - - return retVal.rc; -} - -static inline u64 HvCallPci_getBarParms(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u8 barNumberParm, u64 parms, u32 sizeofParms) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - dsa.barNumber = barNumberParm; - - return HvCall3(HvCallPciGetBarParms, *(u64*)&dsa, parms, sizeofParms); -} - -static inline u64 HvCallPci_maskFisr(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u64 fisrMask) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - return HvCall2(HvCallPciMaskFisr, *(u64*)&dsa, fisrMask); -} - -static inline u64 HvCallPci_unmaskFisr(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u64 fisrMask) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - return HvCall2(HvCallPciUnmaskFisr, *(u64*)&dsa, fisrMask); -} - -static inline u64 HvCallPci_getDeviceInfo(u16 busNumberParm, u8 subBusParm, - u8 deviceNumberParm, u64 parms, u32 sizeofParms) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceNumberParm << 4; - - return HvCall3(HvCallPciGetDeviceInfo, *(u64*)&dsa, parms, sizeofParms); -} - -static inline u64 HvCallPci_maskInterrupts(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u64 interruptMask) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - return HvCall2(HvCallPciMaskInterrupts, *(u64*)&dsa, interruptMask); -} - -static inline u64 HvCallPci_unmaskInterrupts(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u64 interruptMask) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - return HvCall2(HvCallPciUnmaskInterrupts, *(u64*)&dsa, interruptMask); -} - -static inline u64 HvCallPci_getBusUnitInfo(u16 busNumberParm, u8 subBusParm, - u8 deviceIdParm, u64 parms, u32 sizeofParms) -{ - struct HvCallPci_DsaAddr dsa; - - *((u64*)&dsa) = 0; - - dsa.busNumber = busNumberParm; - dsa.subBusNumber = subBusParm; - dsa.deviceId = deviceIdParm; - - return HvCall3(HvCallPciGetBusUnitInfo, *(u64*)&dsa, parms, - sizeofParms); -} - -static inline int HvCallPci_getBusVpd(u16 busNumParm, u64 destParm, - u16 sizeParm) -{ - u64 xRc = HvCall4(HvCallPciGetCardVpd, busNumParm, destParm, - sizeParm, HvCallPci_BusVpd); - if (xRc == -1) - return -1; - else - return xRc & 0xFFFF; -} - -#endif /* _PLATFORMS_ISERIES_CALL_PCI_H */ diff --git a/arch/powerpc/platforms/iseries/call_sm.h b/arch/powerpc/platforms/iseries/call_sm.h deleted file mode 100644 index c7e251619f4..00000000000 --- a/arch/powerpc/platforms/iseries/call_sm.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ISERIES_CALL_SM_H -#define _ISERIES_CALL_SM_H - -/* - * This file contains the "hypervisor call" interface which is used to - * drive the hypervisor from the OS. - */ - -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> - -#define HvCallSmGet64BitsOfAccessMap HvCallSm + 11 - -static inline u64 HvCallSm_get64BitsOfAccessMap(HvLpIndex lpIndex, - u64 indexIntoBitMap) -{ - return HvCall2(HvCallSmGet64BitsOfAccessMap, lpIndex, indexIntoBitMap); -} - -#endif /* _ISERIES_CALL_SM_H */ diff --git a/arch/powerpc/platforms/iseries/dt.c b/arch/powerpc/platforms/iseries/dt.c deleted file mode 100644 index f0491cc2890..00000000000 --- a/arch/powerpc/platforms/iseries/dt.c +++ /dev/null @@ -1,643 +0,0 @@ -/* - * Copyright (C) 2005-2006 Michael Ellerman, IBM Corporation - * Copyright (C) 2000-2004, IBM Corporation - * - * Description: - * This file contains all the routines to build a flattened device - * tree for a legacy iSeries machine. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/pci_regs.h> -#include <linux/pci_ids.h> -#include <linux/threads.h> -#include <linux/bitops.h> -#include <linux/string.h> -#include <linux/kernel.h> -#include <linux/if_ether.h> /* ETH_ALEN */ - -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/lppaca.h> -#include <asm/cputable.h> -#include <asm/abs_addr.h> -#include <asm/system.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/udbg.h> - -#include "processor_vpd.h" -#include "call_hpt.h" -#include "call_pci.h" -#include "pci.h" -#include "it_exp_vpd_panel.h" -#include "naca.h" - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -/* - * These are created by the linker script at the start and end - * of the section containing all the strings marked with the DS macro. - */ -extern char __dt_strings_start[]; -extern char __dt_strings_end[]; - -#define DS(s) ({ \ - static const char __s[] __attribute__((section(".dt_strings"))) = s; \ - __s; \ -}) - -struct iseries_flat_dt { - struct boot_param_header header; - u64 reserve_map[2]; -}; - -static void * __initdata dt_data; - -/* - * Putting these strings here keeps them out of the .dt_strings section - * that we capture for the strings blob of the flattened device tree. - */ -static char __initdata device_type_cpu[] = "cpu"; -static char __initdata device_type_memory[] = "memory"; -static char __initdata device_type_serial[] = "serial"; -static char __initdata device_type_network[] = "network"; -static char __initdata device_type_pci[] = "pci"; -static char __initdata device_type_vdevice[] = "vdevice"; -static char __initdata device_type_vscsi[] = "vscsi"; - - -/* EBCDIC to ASCII conversion routines */ - -static unsigned char __init e2a(unsigned char x) -{ - switch (x) { - case 0x81 ... 0x89: - return x - 0x81 + 'a'; - case 0x91 ... 0x99: - return x - 0x91 + 'j'; - case 0xA2 ... 0xA9: - return x - 0xA2 + 's'; - case 0xC1 ... 0xC9: - return x - 0xC1 + 'A'; - case 0xD1 ... 0xD9: - return x - 0xD1 + 'J'; - case 0xE2 ... 0xE9: - return x - 0xE2 + 'S'; - case 0xF0 ... 0xF9: - return x - 0xF0 + '0'; - } - return ' '; -} - -static unsigned char * __init strne2a(unsigned char *dest, - const unsigned char *src, size_t n) -{ - int i; - - n = strnlen(src, n); - - for (i = 0; i < n; i++) - dest[i] = e2a(src[i]); - - return dest; -} - -static struct iseries_flat_dt * __init dt_init(void) -{ - struct iseries_flat_dt *dt; - unsigned long str_len; - - str_len = __dt_strings_end - __dt_strings_start; - dt = (struct iseries_flat_dt *)ALIGN(klimit, 8); - dt->header.off_mem_rsvmap = - offsetof(struct iseries_flat_dt, reserve_map); - dt->header.off_dt_strings = ALIGN(sizeof(*dt), 8); - dt->header.off_dt_struct = dt->header.off_dt_strings - + ALIGN(str_len, 8); - dt_data = (void *)((unsigned long)dt + dt->header.off_dt_struct); - dt->header.dt_strings_size = str_len; - - /* There is no notion of hardware cpu id on iSeries */ - dt->header.boot_cpuid_phys = smp_processor_id(); - - memcpy((char *)dt + dt->header.off_dt_strings, __dt_strings_start, - str_len); - - dt->header.magic = OF_DT_HEADER; - dt->header.version = 0x10; - dt->header.last_comp_version = 0x10; - - dt->reserve_map[0] = 0; - dt->reserve_map[1] = 0; - - return dt; -} - -static void __init dt_push_u32(struct iseries_flat_dt *dt, u32 value) -{ - *((u32 *)dt_data) = value; - dt_data += sizeof(u32); -} - -#ifdef notyet -static void __init dt_push_u64(struct iseries_flat_dt *dt, u64 value) -{ - *((u64 *)dt_data) = value; - dt_data += sizeof(u64); -} -#endif - -static void __init dt_push_bytes(struct iseries_flat_dt *dt, const char *data, - int len) -{ - memcpy(dt_data, data, len); - dt_data += ALIGN(len, 4); -} - -static void __init dt_start_node(struct iseries_flat_dt *dt, const char *name) -{ - dt_push_u32(dt, OF_DT_BEGIN_NODE); - dt_push_bytes(dt, name, strlen(name) + 1); -} - -#define dt_end_node(dt) dt_push_u32(dt, OF_DT_END_NODE) - -static void __init __dt_prop(struct iseries_flat_dt *dt, const char *name, - const void *data, int len) -{ - unsigned long offset; - - dt_push_u32(dt, OF_DT_PROP); - - /* Length of the data */ - dt_push_u32(dt, len); - - offset = name - __dt_strings_start; - - /* The offset of the properties name in the string blob. */ - dt_push_u32(dt, (u32)offset); - - /* The actual data. */ - dt_push_bytes(dt, data, len); -} -#define dt_prop(dt, name, data, len) __dt_prop((dt), DS(name), (data), (len)) - -#define dt_prop_str(dt, name, data) \ - dt_prop((dt), name, (data), strlen((data)) + 1); /* + 1 for NULL */ - -static void __init __dt_prop_u32(struct iseries_flat_dt *dt, const char *name, - u32 data) -{ - __dt_prop(dt, name, &data, sizeof(u32)); -} -#define dt_prop_u32(dt, name, data) __dt_prop_u32((dt), DS(name), (data)) - -static void __init __maybe_unused __dt_prop_u64(struct iseries_flat_dt *dt, - const char *name, u64 data) -{ - __dt_prop(dt, name, &data, sizeof(u64)); -} -#define dt_prop_u64(dt, name, data) __dt_prop_u64((dt), DS(name), (data)) - -#define dt_prop_u64_list(dt, name, data, n) \ - dt_prop((dt), name, (data), sizeof(u64) * (n)) - -#define dt_prop_u32_list(dt, name, data, n) \ - dt_prop((dt), name, (data), sizeof(u32) * (n)) - -#define dt_prop_empty(dt, name) dt_prop((dt), name, NULL, 0) - -static void __init dt_cpus(struct iseries_flat_dt *dt) -{ - unsigned char buf[32]; - unsigned char *p; - unsigned int i, index; - struct IoHriProcessorVpd *d; - u32 pft_size[2]; - - /* yuck */ - snprintf(buf, 32, "PowerPC,%s", cur_cpu_spec->cpu_name); - p = strchr(buf, ' '); - if (!p) p = buf + strlen(buf); - - dt_start_node(dt, "cpus"); - dt_prop_u32(dt, "#address-cells", 1); - dt_prop_u32(dt, "#size-cells", 0); - - pft_size[0] = 0; /* NUMA CEC cookie, 0 for non NUMA */ - pft_size[1] = __ilog2(HvCallHpt_getHptPages() * HW_PAGE_SIZE); - - for (i = 0; i < NR_LPPACAS; i++) { - if (lppaca[i].dyn_proc_status >= 2) - continue; - - snprintf(p, 32 - (p - buf), "@%d", i); - dt_start_node(dt, buf); - - dt_prop_str(dt, "device_type", device_type_cpu); - - index = lppaca[i].dyn_hv_phys_proc_index; - d = &xIoHriProcessorVpd[index]; - - dt_prop_u32(dt, "i-cache-size", d->xInstCacheSize * 1024); - dt_prop_u32(dt, "i-cache-line-size", d->xInstCacheOperandSize); - - dt_prop_u32(dt, "d-cache-size", d->xDataL1CacheSizeKB * 1024); - dt_prop_u32(dt, "d-cache-line-size", d->xDataCacheOperandSize); - - /* magic conversions to Hz copied from old code */ - dt_prop_u32(dt, "clock-frequency", - ((1UL << 34) * 1000000) / d->xProcFreq); - dt_prop_u32(dt, "timebase-frequency", - ((1UL << 32) * 1000000) / d->xTimeBaseFreq); - - dt_prop_u32(dt, "reg", i); - - dt_prop_u32_list(dt, "ibm,pft-size", pft_size, 2); - - dt_end_node(dt); - } - - dt_end_node(dt); -} - -static void __init dt_model(struct iseries_flat_dt *dt) -{ - char buf[16] = "IBM,"; - - /* N.B. lparcfg.c knows about the "IBM," prefixes ... */ - /* "IBM," + mfgId[2:3] + systemSerial[1:5] */ - strne2a(buf + 4, xItExtVpdPanel.mfgID + 2, 2); - strne2a(buf + 6, xItExtVpdPanel.systemSerial + 1, 5); - buf[11] = '\0'; - dt_prop_str(dt, "system-id", buf); - - /* "IBM," + machineType[0:4] */ - strne2a(buf + 4, xItExtVpdPanel.machineType, 4); - buf[8] = '\0'; - dt_prop_str(dt, "model", buf); - - dt_prop_str(dt, "compatible", "IBM,iSeries"); - dt_prop_u32(dt, "ibm,partition-no", HvLpConfig_getLpIndex()); -} - -static void __init dt_initrd(struct iseries_flat_dt *dt) -{ -#ifdef CONFIG_BLK_DEV_INITRD - if (naca.xRamDisk) { - dt_prop_u64(dt, "linux,initrd-start", (u64)naca.xRamDisk); - dt_prop_u64(dt, "linux,initrd-end", - (u64)naca.xRamDisk + naca.xRamDiskSize * HW_PAGE_SIZE); - } -#endif -} - -static void __init dt_do_vdevice(struct iseries_flat_dt *dt, - const char *name, u32 reg, int unit, - const char *type, const char *compat, int end) -{ - char buf[32]; - - snprintf(buf, 32, "%s@%08x", name, reg + ((unit >= 0) ? unit : 0)); - dt_start_node(dt, buf); - dt_prop_str(dt, "device_type", type); - if (compat) - dt_prop_str(dt, "compatible", compat); - dt_prop_u32(dt, "reg", reg + ((unit >= 0) ? unit : 0)); - if (unit >= 0) - dt_prop_u32(dt, "linux,unit_address", unit); - if (end) - dt_end_node(dt); -} - -static void __init dt_vdevices(struct iseries_flat_dt *dt) -{ - u32 reg = 0; - HvLpIndexMap vlan_map; - int i; - - dt_start_node(dt, "vdevice"); - dt_prop_str(dt, "device_type", device_type_vdevice); - dt_prop_str(dt, "compatible", "IBM,iSeries-vdevice"); - dt_prop_u32(dt, "#address-cells", 1); - dt_prop_u32(dt, "#size-cells", 0); - - dt_do_vdevice(dt, "vty", reg, -1, device_type_serial, - "IBM,iSeries-vty", 1); - reg++; - - dt_do_vdevice(dt, "v-scsi", reg, -1, device_type_vscsi, - "IBM,v-scsi", 1); - reg++; - - vlan_map = HvLpConfig_getVirtualLanIndexMap(); - for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) { - unsigned char mac_addr[ETH_ALEN]; - - if ((vlan_map & (0x8000 >> i)) == 0) - continue; - dt_do_vdevice(dt, "l-lan", reg, i, device_type_network, - "IBM,iSeries-l-lan", 0); - mac_addr[0] = 0x02; - mac_addr[1] = 0x01; - mac_addr[2] = 0xff; - mac_addr[3] = i; - mac_addr[4] = 0xff; - mac_addr[5] = HvLpConfig_getLpIndex_outline(); - dt_prop(dt, "local-mac-address", (char *)mac_addr, ETH_ALEN); - dt_prop(dt, "mac-address", (char *)mac_addr, ETH_ALEN); - dt_prop_u32(dt, "max-frame-size", 9000); - dt_prop_u32(dt, "address-bits", 48); - - dt_end_node(dt); - } - - dt_end_node(dt); -} - -struct pci_class_name { - u16 code; - const char *name; - const char *type; -}; - -static struct pci_class_name __initdata pci_class_name[] = { - { PCI_CLASS_NETWORK_ETHERNET, "ethernet", device_type_network }, -}; - -static struct pci_class_name * __init dt_find_pci_class_name(u16 class_code) -{ - struct pci_class_name *cp; - - for (cp = pci_class_name; - cp < &pci_class_name[ARRAY_SIZE(pci_class_name)]; cp++) - if (cp->code == class_code) - return cp; - return NULL; -} - -/* - * This assumes that the node slot is always on the primary bus! - */ -static void __init scan_bridge_slot(struct iseries_flat_dt *dt, - HvBusNumber bus, struct HvCallPci_BridgeInfo *bridge_info) -{ - HvSubBusNumber sub_bus = bridge_info->subBusNumber; - u16 vendor_id; - u16 device_id; - u32 class_id; - int err; - char buf[32]; - u32 reg[5]; - int id_sel = ISERIES_GET_DEVICE_FROM_SUBBUS(sub_bus); - int function = ISERIES_GET_FUNCTION_FROM_SUBBUS(sub_bus); - HvAgentId eads_id_sel = ISERIES_PCI_AGENTID(id_sel, function); - u8 devfn; - struct pci_class_name *cp; - - /* - * Connect all functions of any device found. - */ - for (id_sel = 1; id_sel <= bridge_info->maxAgents; id_sel++) { - for (function = 0; function < 8; function++) { - HvAgentId agent_id = ISERIES_PCI_AGENTID(id_sel, - function); - err = HvCallXm_connectBusUnit(bus, sub_bus, - agent_id, 0); - if (err) { - if (err != 0x302) - DBG("connectBusUnit(%x, %x, %x) %x\n", - bus, sub_bus, agent_id, err); - continue; - } - - err = HvCallPci_configLoad16(bus, sub_bus, agent_id, - PCI_VENDOR_ID, &vendor_id); - if (err) { - DBG("ReadVendor(%x, %x, %x) %x\n", - bus, sub_bus, agent_id, err); - continue; - } - err = HvCallPci_configLoad16(bus, sub_bus, agent_id, - PCI_DEVICE_ID, &device_id); - if (err) { - DBG("ReadDevice(%x, %x, %x) %x\n", - bus, sub_bus, agent_id, err); - continue; - } - err = HvCallPci_configLoad32(bus, sub_bus, agent_id, - PCI_CLASS_REVISION , &class_id); - if (err) { - DBG("ReadClass(%x, %x, %x) %x\n", - bus, sub_bus, agent_id, err); - continue; - } - - devfn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(eads_id_sel), - function); - cp = dt_find_pci_class_name(class_id >> 16); - if (cp && cp->name) - strncpy(buf, cp->name, sizeof(buf) - 1); - else - snprintf(buf, sizeof(buf), "pci%x,%x", - vendor_id, device_id); - buf[sizeof(buf) - 1] = '\0'; - snprintf(buf + strlen(buf), sizeof(buf) - strlen(buf), - "@%x", PCI_SLOT(devfn)); - buf[sizeof(buf) - 1] = '\0'; - if (function != 0) - snprintf(buf + strlen(buf), - sizeof(buf) - strlen(buf), - ",%x", function); - dt_start_node(dt, buf); - reg[0] = (bus << 16) | (devfn << 8); - reg[1] = 0; - reg[2] = 0; - reg[3] = 0; - reg[4] = 0; - dt_prop_u32_list(dt, "reg", reg, 5); - if (cp && (cp->type || cp->name)) - dt_prop_str(dt, "device_type", - cp->type ? cp->type : cp->name); - dt_prop_u32(dt, "vendor-id", vendor_id); - dt_prop_u32(dt, "device-id", device_id); - dt_prop_u32(dt, "class-code", class_id >> 8); - dt_prop_u32(dt, "revision-id", class_id & 0xff); - dt_prop_u32(dt, "linux,subbus", sub_bus); - dt_prop_u32(dt, "linux,agent-id", agent_id); - dt_prop_u32(dt, "linux,logical-slot-number", - bridge_info->logicalSlotNumber); - dt_end_node(dt); - - } - } -} - -static void __init scan_bridge(struct iseries_flat_dt *dt, HvBusNumber bus, - HvSubBusNumber sub_bus, int id_sel) -{ - struct HvCallPci_BridgeInfo bridge_info; - HvAgentId agent_id; - int function; - int ret; - - /* Note: hvSubBus and irq is always be 0 at this level! */ - for (function = 0; function < 8; ++function) { - agent_id = ISERIES_PCI_AGENTID(id_sel, function); - ret = HvCallXm_connectBusUnit(bus, sub_bus, agent_id, 0); - if (ret != 0) { - if (ret != 0xb) - DBG("connectBusUnit(%x, %x, %x) %x\n", - bus, sub_bus, agent_id, ret); - continue; - } - DBG("found device at bus %d idsel %d func %d (AgentId %x)\n", - bus, id_sel, function, agent_id); - ret = HvCallPci_getBusUnitInfo(bus, sub_bus, agent_id, - iseries_hv_addr(&bridge_info), - sizeof(struct HvCallPci_BridgeInfo)); - if (ret != 0) - continue; - DBG("bridge info: type %x subbus %x " - "maxAgents %x maxsubbus %x logslot %x\n", - bridge_info.busUnitInfo.deviceType, - bridge_info.subBusNumber, - bridge_info.maxAgents, - bridge_info.maxSubBusNumber, - bridge_info.logicalSlotNumber); - if (bridge_info.busUnitInfo.deviceType == - HvCallPci_BridgeDevice) - scan_bridge_slot(dt, bus, &bridge_info); - else - DBG("PCI: Invalid Bridge Configuration(0x%02X)", - bridge_info.busUnitInfo.deviceType); - } -} - -static void __init scan_phb(struct iseries_flat_dt *dt, HvBusNumber bus) -{ - struct HvCallPci_DeviceInfo dev_info; - const HvSubBusNumber sub_bus = 0; /* EADs is always 0. */ - int err; - int id_sel; - const int max_agents = 8; - - /* - * Probe for EADs Bridges - */ - for (id_sel = 1; id_sel < max_agents; ++id_sel) { - err = HvCallPci_getDeviceInfo(bus, sub_bus, id_sel, - iseries_hv_addr(&dev_info), - sizeof(struct HvCallPci_DeviceInfo)); - if (err) { - if (err != 0x302) - DBG("getDeviceInfo(%x, %x, %x) %x\n", - bus, sub_bus, id_sel, err); - continue; - } - if (dev_info.deviceType != HvCallPci_NodeDevice) { - DBG("PCI: Invalid System Configuration" - "(0x%02X) for bus 0x%02x id 0x%02x.\n", - dev_info.deviceType, bus, id_sel); - continue; - } - scan_bridge(dt, bus, sub_bus, id_sel); - } -} - -static void __init dt_pci_devices(struct iseries_flat_dt *dt) -{ - HvBusNumber bus; - char buf[32]; - u32 buses[2]; - int phb_num = 0; - - /* Check all possible buses. */ - for (bus = 0; bus < 256; bus++) { - int err = HvCallXm_testBus(bus); - - if (err) { - /* - * Check for Unexpected Return code, a clue that - * something has gone wrong. - */ - if (err != 0x0301) - DBG("Unexpected Return on Probe(0x%02X) " - "0x%04X\n", bus, err); - continue; - } - DBG("bus %d appears to exist\n", bus); - snprintf(buf, 32, "pci@%d", phb_num); - dt_start_node(dt, buf); - dt_prop_str(dt, "device_type", device_type_pci); - dt_prop_str(dt, "compatible", "IBM,iSeries-Logical-PHB"); - dt_prop_u32(dt, "#address-cells", 3); - dt_prop_u32(dt, "#size-cells", 2); - buses[0] = buses[1] = bus; - dt_prop_u32_list(dt, "bus-range", buses, 2); - scan_phb(dt, bus); - dt_end_node(dt); - phb_num++; - } -} - -static void dt_finish(struct iseries_flat_dt *dt) -{ - dt_push_u32(dt, OF_DT_END); - dt->header.totalsize = (unsigned long)dt_data - (unsigned long)dt; - klimit = ALIGN((unsigned long)dt_data, 8); -} - -void * __init build_flat_dt(unsigned long phys_mem_size) -{ - struct iseries_flat_dt *iseries_dt; - u64 tmp[2]; - - iseries_dt = dt_init(); - - dt_start_node(iseries_dt, ""); - - dt_prop_u32(iseries_dt, "#address-cells", 2); - dt_prop_u32(iseries_dt, "#size-cells", 2); - dt_model(iseries_dt); - - /* /memory */ - dt_start_node(iseries_dt, "memory@0"); - dt_prop_str(iseries_dt, "device_type", device_type_memory); - tmp[0] = 0; - tmp[1] = phys_mem_size; - dt_prop_u64_list(iseries_dt, "reg", tmp, 2); - dt_end_node(iseries_dt); - - /* /chosen */ - dt_start_node(iseries_dt, "chosen"); - dt_prop_str(iseries_dt, "bootargs", cmd_line); - dt_initrd(iseries_dt); - dt_end_node(iseries_dt); - - dt_cpus(iseries_dt); - - dt_vdevices(iseries_dt); - dt_pci_devices(iseries_dt); - - dt_end_node(iseries_dt); - - dt_finish(iseries_dt); - - return iseries_dt; -} diff --git a/arch/powerpc/platforms/iseries/exception.S b/arch/powerpc/platforms/iseries/exception.S deleted file mode 100644 index f519ee17ff7..00000000000 --- a/arch/powerpc/platforms/iseries/exception.S +++ /dev/null @@ -1,311 +0,0 @@ -/* - * Low level routines for legacy iSeries support. - * - * Extracted from head_64.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/reg.h> -#include <asm/ppc_asm.h> -#include <asm/asm-offsets.h> -#include <asm/thread_info.h> -#include <asm/ptrace.h> -#include <asm/cputable.h> -#include <asm/mmu.h> - -#include "exception.h" - - .text - - .globl system_reset_iSeries -system_reset_iSeries: - bl .relative_toc - mfspr r13,SPRN_SPRG3 /* Get alpaca address */ - LOAD_REG_ADDR(r23, alpaca) - li r0,ALPACA_SIZE - sub r23,r13,r23 - divdu r24,r23,r0 /* r24 has cpu number */ - cmpwi 0,r24,0 /* Are we processor 0? */ - bne 1f - LOAD_REG_ADDR(r13, boot_paca) - mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ - mfmsr r23 - ori r23,r23,MSR_RI - mtmsrd r23 /* RI on */ - b .__start_initialization_iSeries /* Start up the first processor */ -1: mfspr r4,SPRN_CTRLF - li r5,CTRL_RUNLATCH /* Turn off the run light */ - andc r4,r4,r5 - mtspr SPRN_CTRLT,r4 - -/* Spin on __secondary_hold_spinloop until it is updated by the boot cpu. */ -/* In the UP case we'll yield() later, and we will not access the paca anyway */ -#ifdef CONFIG_SMP -iSeries_secondary_wait_paca: - HMT_LOW - LOAD_REG_ADDR(r23, __secondary_hold_spinloop) - ld r23,0(r23) - - cmpdi 0,r23,0 - bne 2f /* go on when the master is ready */ - - /* Keep poking the Hypervisor until we're released */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - b iSeries_secondary_wait_paca - -2: - HMT_MEDIUM - sync - - LOAD_REG_ADDR(r3, nr_cpu_ids) /* get number of pacas allocated */ - lwz r3,0(r3) /* nr_cpus= or NR_CPUS can limit */ - cmpld 0,r24,r3 /* is our cpu number allocated? */ - bge iSeries_secondary_yield /* no, yield forever */ - - /* Load our paca now that it's been allocated */ - LOAD_REG_ADDR(r13, paca) - ld r13,0(r13) - mulli r0,r24,PACA_SIZE - add r13,r13,r0 - mtspr SPRN_SPRG_PACA,r13 /* Save it away for the future */ - mfmsr r23 - ori r23,r23,MSR_RI - mtmsrd r23 /* RI on */ - -iSeries_secondary_smp_loop: - lbz r23,PACAPROCSTART(r13) /* Test if this processor - * should start */ - cmpwi 0,r23,0 - bne 3f /* go on when we are told */ - - HMT_LOW - /* Let the Hypervisor know we are alive */ - /* 8002 is a call to HvCallCfg::getLps, a harmless Hypervisor function */ - lis r3,0x8002 - rldicr r3,r3,32,15 /* r0 = (r3 << 32) & 0xffff000000000000 */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */ - b iSeries_secondary_smp_loop /* wait for signal to start */ - -3: - HMT_MEDIUM - sync - LOAD_REG_ADDR(r3,current_set) - sldi r28,r24,3 /* get current_set[cpu#] */ - ldx r3,r3,r28 - addi r1,r3,THREAD_SIZE - subi r1,r1,STACK_FRAME_OVERHEAD - - b __secondary_start /* Loop until told to go */ -#endif /* CONFIG_SMP */ - -iSeries_secondary_yield: - /* Yield the processor. This is required for non-SMP kernels - which are running on multi-threaded machines. */ - HMT_LOW - lis r3,0x8000 - rldicr r3,r3,32,15 /* r3 = (r3 << 32) & 0xffff000000000000 */ - addi r3,r3,18 /* r3 = 0x8000000000000012 which is "yield" */ - li r4,0 /* "yield timed" */ - li r5,-1 /* "yield forever" */ - li r0,-1 /* r0=-1 indicates a Hypervisor call */ - sc /* Invoke the hypervisor via a system call */ - mfspr r13,SPRN_SPRG_PACA /* Put r13 back ???? */ - b iSeries_secondary_yield /* If SMP not configured, secondaries - * loop forever */ - -/*** ISeries-LPAR interrupt handlers ***/ - - STD_EXCEPTION_ISERIES(machine_check, PACA_EXMC) - - .globl data_access_iSeries -data_access_iSeries: - mtspr SPRN_SPRG_SCRATCH0,r13 -BEGIN_FTR_SECTION - mfspr r13,SPRN_SPRG_PACA - std r9,PACA_EXSLB+EX_R9(r13) - std r10,PACA_EXSLB+EX_R10(r13) - mfspr r10,SPRN_DAR - mfspr r9,SPRN_DSISR - srdi r10,r10,60 - rlwimi r10,r9,16,0x20 - mfcr r9 - cmpwi r10,0x2c - beq .do_stab_bolted_iSeries - ld r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - ld r11,PACA_EXSLB+EX_R9(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r12,SPRN_SPRG_SCRATCH0 - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R13(r13) - EXCEPTION_PROLOG_ISERIES_1 -FTR_SECTION_ELSE - EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0) - EXCEPTION_PROLOG_ISERIES_1 -ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_SLB) - b data_access_common - -.do_stab_bolted_iSeries: - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG_SCRATCH0 - std r10,PACA_EXSLB+EX_R13(r13) - EXCEPTION_PROLOG_ISERIES_1 - b .do_stab_bolted - - .globl data_access_slb_iSeries -data_access_slb_iSeries: - mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ - mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - mfspr r3,SPRN_DAR - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG_SCRATCH0 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - - STD_EXCEPTION_ISERIES(instruction_access, PACA_EXGEN) - - .globl instruction_access_slb_iSeries -instruction_access_slb_iSeries: - mtspr SPRN_SPRG_SCRATCH0,r13 /* save r13 */ - mfspr r13,SPRN_SPRG_PACA /* get paca address into r13 */ - std r3,PACA_EXSLB+EX_R3(r13) - ld r3,PACALPPACAPTR(r13) - ld r3,LPPACASRR0(r3) /* get SRR0 value */ - std r9,PACA_EXSLB+EX_R9(r13) - mfcr r9 -#ifdef __DISABLED__ - cmpdi r3,0 - bge slb_miss_user_iseries -#endif - std r10,PACA_EXSLB+EX_R10(r13) - std r11,PACA_EXSLB+EX_R11(r13) - std r12,PACA_EXSLB+EX_R12(r13) - mfspr r10,SPRN_SPRG_SCRATCH0 - std r10,PACA_EXSLB+EX_R13(r13) - ld r12,PACALPPACAPTR(r13) - ld r12,LPPACASRR1(r12) - b .slb_miss_realmode - -#ifdef __DISABLED__ -slb_miss_user_iseries: - std r10,PACA_EXGEN+EX_R10(r13) - std r11,PACA_EXGEN+EX_R11(r13) - std r12,PACA_EXGEN+EX_R12(r13) - mfspr r10,SPRG_SCRATCH0 - ld r11,PACA_EXSLB+EX_R9(r13) - ld r12,PACA_EXSLB+EX_R3(r13) - std r10,PACA_EXGEN+EX_R13(r13) - std r11,PACA_EXGEN+EX_R9(r13) - std r12,PACA_EXGEN+EX_R3(r13) - EXCEPTION_PROLOG_ISERIES_1 - b slb_miss_user_common -#endif - - MASKABLE_EXCEPTION_ISERIES(hardware_interrupt) - STD_EXCEPTION_ISERIES(alignment, PACA_EXGEN) - STD_EXCEPTION_ISERIES(program_check, PACA_EXGEN) - STD_EXCEPTION_ISERIES(fp_unavailable, PACA_EXGEN) - MASKABLE_EXCEPTION_ISERIES(decrementer) - STD_EXCEPTION_ISERIES(trap_0a, PACA_EXGEN) - STD_EXCEPTION_ISERIES(trap_0b, PACA_EXGEN) - - .globl system_call_iSeries -system_call_iSeries: - mr r9,r13 - mfspr r13,SPRN_SPRG_PACA - EXCEPTION_PROLOG_ISERIES_1 - b system_call_common - - STD_EXCEPTION_ISERIES(single_step, PACA_EXGEN) - STD_EXCEPTION_ISERIES(trap_0e, PACA_EXGEN) - STD_EXCEPTION_ISERIES(performance_monitor, PACA_EXGEN) - -decrementer_iSeries_masked: - /* We may not have a valid TOC pointer in here. */ - li r11,1 - ld r12,PACALPPACAPTR(r13) - stb r11,LPPACADECRINT(r12) - li r12,-1 - clrldi r12,r12,33 /* set DEC to 0x7fffffff */ - mtspr SPRN_DEC,r12 - /* fall through */ - -hardware_interrupt_iSeries_masked: - mtcrf 0x80,r9 /* Restore regs */ - ld r12,PACALPPACAPTR(r13) - ld r11,LPPACASRR0(r12) - ld r12,LPPACASRR1(r12) - mtspr SPRN_SRR0,r11 - mtspr SPRN_SRR1,r12 - ld r9,PACA_EXGEN+EX_R9(r13) - ld r10,PACA_EXGEN+EX_R10(r13) - ld r11,PACA_EXGEN+EX_R11(r13) - ld r12,PACA_EXGEN+EX_R12(r13) - ld r13,PACA_EXGEN+EX_R13(r13) - rfid - b . /* prevent speculative execution */ - -_INIT_STATIC(__start_initialization_iSeries) - /* Clear out the BSS */ - LOAD_REG_ADDR(r11,__bss_stop) - LOAD_REG_ADDR(r8,__bss_start) - sub r11,r11,r8 /* bss size */ - addi r11,r11,7 /* round up to an even double word */ - rldicl. r11,r11,61,3 /* shift right by 3 */ - beq 4f - addi r8,r8,-8 - li r0,0 - mtctr r11 /* zero this many doublewords */ -3: stdu r0,8(r8) - bdnz 3b -4: - LOAD_REG_ADDR(r1,init_thread_union) - addi r1,r1,THREAD_SIZE - li r0,0 - stdu r0,-STACK_FRAME_OVERHEAD(r1) - - bl .iSeries_early_setup - bl .early_setup - - /* relocation is on at this point */ - - b .start_here_common diff --git a/arch/powerpc/platforms/iseries/exception.h b/arch/powerpc/platforms/iseries/exception.h deleted file mode 100644 index 50271b550a9..00000000000 --- a/arch/powerpc/platforms/iseries/exception.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _ASM_POWERPC_ISERIES_EXCEPTION_H -#define _ASM_POWERPC_ISERIES_EXCEPTION_H -/* - * Extracted from head_64.S - * - * PowerPC version - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP - * Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu> - * Adapted for Power Macintosh by Paul Mackerras. - * Low-level exception handlers and MMU support - * rewritten by Paul Mackerras. - * Copyright (C) 1996 Paul Mackerras. - * - * Adapted for 64bit PowerPC by Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikejc}@us.ibm.com - * - * This file contains the low-level support and setup for the - * PowerPC-64 platform, including trap and interrupt dispatch. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/exception-64s.h> - -#define EXCEPTION_PROLOG_ISERIES_1 \ - mfmsr r10; \ - ld r12,PACALPPACAPTR(r13); \ - ld r11,LPPACASRR0(r12); \ - ld r12,LPPACASRR1(r12); \ - ori r10,r10,MSR_RI; \ - mtmsrd r10,1 - -#define STD_EXCEPTION_ISERIES(label, area) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ - EXCEPTION_PROLOG_1(area, NOTEST, 0); \ - EXCEPTION_PROLOG_ISERIES_1; \ - b label##_common - -#define MASKABLE_EXCEPTION_ISERIES(label) \ - .globl label##_iSeries; \ -label##_iSeries: \ - HMT_MEDIUM; \ - mtspr SPRN_SPRG_SCRATCH0,r13; /* save r13 */ \ - EXCEPTION_PROLOG_1(PACA_EXGEN, NOTEST, 0); \ - lbz r10,PACASOFTIRQEN(r13); \ - cmpwi 0,r10,0; \ - beq- label##_iSeries_masked; \ - EXCEPTION_PROLOG_ISERIES_1; \ - b label##_common; \ - -#endif /* _ASM_POWERPC_ISERIES_EXCEPTION_H */ diff --git a/arch/powerpc/platforms/iseries/htab.c b/arch/powerpc/platforms/iseries/htab.c deleted file mode 100644 index 3ae66ab9d5e..00000000000 --- a/arch/powerpc/platforms/iseries/htab.c +++ /dev/null @@ -1,257 +0,0 @@ -/* - * iSeries hashtable management. - * Derived from pSeries_htab.c - * - * SMP scalability work: - * Copyright (C) 2001 Anton Blanchard <anton@au.ibm.com>, IBM - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <asm/machdep.h> -#include <asm/pgtable.h> -#include <asm/mmu.h> -#include <asm/mmu_context.h> -#include <asm/abs_addr.h> -#include <linux/spinlock.h> - -#include "call_hpt.h" - -static spinlock_t iSeries_hlocks[64] __cacheline_aligned_in_smp; - -/* - * Very primitive algorithm for picking up a lock - */ -static inline void iSeries_hlock(unsigned long slot) -{ - if (slot & 0x8) - slot = ~slot; - spin_lock(&iSeries_hlocks[(slot >> 4) & 0x3f]); -} - -static inline void iSeries_hunlock(unsigned long slot) -{ - if (slot & 0x8) - slot = ~slot; - spin_unlock(&iSeries_hlocks[(slot >> 4) & 0x3f]); -} - -static long iSeries_hpte_insert(unsigned long hpte_group, unsigned long va, - unsigned long pa, unsigned long rflags, - unsigned long vflags, int psize, int ssize) -{ - long slot; - struct hash_pte lhpte; - int secondary = 0; - - BUG_ON(psize != MMU_PAGE_4K); - - /* - * The hypervisor tries both primary and secondary. - * If we are being called to insert in the secondary, - * it means we have already tried both primary and secondary, - * so we return failure immediately. - */ - if (vflags & HPTE_V_SECONDARY) - return -1; - - iSeries_hlock(hpte_group); - - slot = HvCallHpt_findValid(&lhpte, va >> HW_PAGE_SHIFT); - if (unlikely(lhpte.v & HPTE_V_VALID)) { - if (vflags & HPTE_V_BOLTED) { - HvCallHpt_setSwBits(slot, 0x10, 0); - HvCallHpt_setPp(slot, PP_RWXX); - iSeries_hunlock(hpte_group); - if (slot < 0) - return 0x8 | (slot & 7); - else - return slot & 7; - } - BUG(); - } - - if (slot == -1) { /* No available entry found in either group */ - iSeries_hunlock(hpte_group); - return -1; - } - - if (slot < 0) { /* MSB set means secondary group */ - vflags |= HPTE_V_SECONDARY; - secondary = 1; - slot &= 0x7fffffffffffffff; - } - - - lhpte.v = hpte_encode_v(va, MMU_PAGE_4K, MMU_SEGSIZE_256M) | - vflags | HPTE_V_VALID; - lhpte.r = hpte_encode_r(phys_to_abs(pa), MMU_PAGE_4K) | rflags; - - /* Now fill in the actual HPTE */ - HvCallHpt_addValidate(slot, secondary, &lhpte); - - iSeries_hunlock(hpte_group); - - return (secondary << 3) | (slot & 7); -} - -static unsigned long iSeries_hpte_getword0(unsigned long slot) -{ - struct hash_pte hpte; - - HvCallHpt_get(&hpte, slot); - return hpte.v; -} - -static long iSeries_hpte_remove(unsigned long hpte_group) -{ - unsigned long slot_offset; - int i; - unsigned long hpte_v; - - /* Pick a random slot to start at */ - slot_offset = mftb() & 0x7; - - iSeries_hlock(hpte_group); - - for (i = 0; i < HPTES_PER_GROUP; i++) { - hpte_v = iSeries_hpte_getword0(hpte_group + slot_offset); - - if (! (hpte_v & HPTE_V_BOLTED)) { - HvCallHpt_invalidateSetSwBitsGet(hpte_group + - slot_offset, 0, 0); - iSeries_hunlock(hpte_group); - return i; - } - - slot_offset++; - slot_offset &= 0x7; - } - - iSeries_hunlock(hpte_group); - - return -1; -} - -/* - * The HyperVisor expects the "flags" argument in this form: - * bits 0..59 : reserved - * bit 60 : N - * bits 61..63 : PP2,PP1,PP0 - */ -static long iSeries_hpte_updatepp(unsigned long slot, unsigned long newpp, - unsigned long va, int psize, int ssize, int local) -{ - struct hash_pte hpte; - unsigned long want_v; - - iSeries_hlock(slot); - - HvCallHpt_get(&hpte, slot); - want_v = hpte_encode_v(va, MMU_PAGE_4K, MMU_SEGSIZE_256M); - - if (HPTE_V_COMPARE(hpte.v, want_v) && (hpte.v & HPTE_V_VALID)) { - /* - * Hypervisor expects bits as NPPP, which is - * different from how they are mapped in our PP. - */ - HvCallHpt_setPp(slot, (newpp & 0x3) | ((newpp & 0x4) << 1)); - iSeries_hunlock(slot); - return 0; - } - iSeries_hunlock(slot); - - return -1; -} - -/* - * Functions used to find the PTE for a particular virtual address. - * Only used during boot when bolting pages. - * - * Input : vpn : virtual page number - * Output: PTE index within the page table of the entry - * -1 on failure - */ -static long iSeries_hpte_find(unsigned long vpn) -{ - struct hash_pte hpte; - long slot; - - /* - * The HvCallHpt_findValid interface is as follows: - * 0xffffffffffffffff : No entry found. - * 0x00000000xxxxxxxx : Entry found in primary group, slot x - * 0x80000000xxxxxxxx : Entry found in secondary group, slot x - */ - slot = HvCallHpt_findValid(&hpte, vpn); - if (hpte.v & HPTE_V_VALID) { - if (slot < 0) { - slot &= 0x7fffffffffffffff; - slot = -slot; - } - } else - slot = -1; - return slot; -} - -/* - * Update the page protection bits. Intended to be used to create - * guard pages for kernel data structures on pages which are bolted - * in the HPT. Assumes pages being operated on will not be stolen. - * Does not work on large pages. - * - * No need to lock here because we should be the only user. - */ -static void iSeries_hpte_updateboltedpp(unsigned long newpp, unsigned long ea, - int psize, int ssize) -{ - unsigned long vsid,va,vpn; - long slot; - - BUG_ON(psize != MMU_PAGE_4K); - - vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M); - va = (vsid << 28) | (ea & 0x0fffffff); - vpn = va >> HW_PAGE_SHIFT; - slot = iSeries_hpte_find(vpn); - if (slot == -1) - panic("updateboltedpp: Could not find page to bolt\n"); - HvCallHpt_setPp(slot, newpp); -} - -static void iSeries_hpte_invalidate(unsigned long slot, unsigned long va, - int psize, int ssize, int local) -{ - unsigned long hpte_v; - unsigned long avpn = va >> 23; - unsigned long flags; - - local_irq_save(flags); - - iSeries_hlock(slot); - - hpte_v = iSeries_hpte_getword0(slot); - - if ((HPTE_V_AVPN_VAL(hpte_v) == avpn) && (hpte_v & HPTE_V_VALID)) - HvCallHpt_invalidateSetSwBitsGet(slot, 0, 0); - - iSeries_hunlock(slot); - - local_irq_restore(flags); -} - -void __init hpte_init_iSeries(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(iSeries_hlocks); i++) - spin_lock_init(&iSeries_hlocks[i]); - - ppc_md.hpte_invalidate = iSeries_hpte_invalidate; - ppc_md.hpte_updatepp = iSeries_hpte_updatepp; - ppc_md.hpte_updateboltedpp = iSeries_hpte_updateboltedpp; - ppc_md.hpte_insert = iSeries_hpte_insert; - ppc_md.hpte_remove = iSeries_hpte_remove; -} diff --git a/arch/powerpc/platforms/iseries/hvcall.S b/arch/powerpc/platforms/iseries/hvcall.S deleted file mode 100644 index 07ae6ad5f49..00000000000 --- a/arch/powerpc/platforms/iseries/hvcall.S +++ /dev/null @@ -1,94 +0,0 @@ -/* - * This file contains the code to perform calls to the - * iSeries LPAR hypervisor - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/ppc_asm.h> -#include <asm/processor.h> -#include <asm/ptrace.h> /* XXX for STACK_FRAME_OVERHEAD */ - - .text - -/* - * Hypervisor call - * - * Invoke the iSeries hypervisor via the System Call instruction - * Parameters are passed to this routine in registers r3 - r10 - * - * r3 contains the HV function to be called - * r4-r10 contain the operands to the hypervisor function - * - */ - -_GLOBAL(HvCall) -_GLOBAL(HvCall0) -_GLOBAL(HvCall1) -_GLOBAL(HvCall2) -_GLOBAL(HvCall3) -_GLOBAL(HvCall4) -_GLOBAL(HvCall5) -_GLOBAL(HvCall6) -_GLOBAL(HvCall7) - - - mfcr r0 - std r0,-8(r1) - stdu r1,-(STACK_FRAME_OVERHEAD+16)(r1) - - /* r0 = 0xffffffffffffffff indicates a hypervisor call */ - - li r0,-1 - - /* Invoke the hypervisor */ - - sc - - ld r1,0(r1) - ld r0,-8(r1) - mtcrf 0xff,r0 - - /* return to caller, return value in r3 */ - - blr - -_GLOBAL(HvCall0Ret16) -_GLOBAL(HvCall1Ret16) -_GLOBAL(HvCall2Ret16) -_GLOBAL(HvCall3Ret16) -_GLOBAL(HvCall4Ret16) -_GLOBAL(HvCall5Ret16) -_GLOBAL(HvCall6Ret16) -_GLOBAL(HvCall7Ret16) - - mfcr r0 - std r0,-8(r1) - std r31,-16(r1) - stdu r1,-(STACK_FRAME_OVERHEAD+32)(r1) - - mr r31,r4 - li r0,-1 - mr r4,r5 - mr r5,r6 - mr r6,r7 - mr r7,r8 - mr r8,r9 - mr r9,r10 - - sc - - std r3,0(r31) - std r4,8(r31) - - mr r3,r5 - - ld r1,0(r1) - ld r0,-8(r1) - mtcrf 0xff,r0 - ld r31,-16(r1) - - blr diff --git a/arch/powerpc/platforms/iseries/hvlog.c b/arch/powerpc/platforms/iseries/hvlog.c deleted file mode 100644 index f476d71194f..00000000000 --- a/arch/powerpc/platforms/iseries/hvlog.c +++ /dev/null @@ -1,35 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <asm/page.h> -#include <asm/abs_addr.h> -#include <asm/iseries/hv_call.h> -#include <asm/iseries/hv_call_sc.h> -#include <asm/iseries/hv_types.h> - - -void HvCall_writeLogBuffer(const void *buffer, u64 len) -{ - struct HvLpBufferList hv_buf; - u64 left_this_page; - u64 cur = virt_to_abs(buffer); - - while (len) { - hv_buf.addr = cur; - left_this_page = ((cur & HW_PAGE_MASK) + HW_PAGE_SIZE) - cur; - if (left_this_page > len) - left_this_page = len; - hv_buf.len = left_this_page; - len -= left_this_page; - HvCall2(HvCallBaseWriteLogBuffer, - virt_to_abs(&hv_buf), - left_this_page); - cur = (cur & HW_PAGE_MASK) + HW_PAGE_SIZE; - } -} diff --git a/arch/powerpc/platforms/iseries/hvlpconfig.c b/arch/powerpc/platforms/iseries/hvlpconfig.c deleted file mode 100644 index f62a0c5fa67..00000000000 --- a/arch/powerpc/platforms/iseries/hvlpconfig.c +++ /dev/null @@ -1,39 +0,0 @@ -/* - * Copyright (C) 2001 Kyle A. Lucke, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/export.h> -#include <asm/iseries/hv_lp_config.h> -#include "it_lp_naca.h" - -HvLpIndex HvLpConfig_getLpIndex_outline(void) -{ - return HvLpConfig_getLpIndex(); -} -EXPORT_SYMBOL(HvLpConfig_getLpIndex_outline); - -HvLpIndex HvLpConfig_getLpIndex(void) -{ - return itLpNaca.xLpIndex; -} -EXPORT_SYMBOL(HvLpConfig_getLpIndex); - -HvLpIndex HvLpConfig_getPrimaryLpIndex(void) -{ - return itLpNaca.xPrimaryLpIndex; -} -EXPORT_SYMBOL_GPL(HvLpConfig_getPrimaryLpIndex); diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c deleted file mode 100644 index 2f3d9110248..00000000000 --- a/arch/powerpc/platforms/iseries/iommu.c +++ /dev/null @@ -1,260 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation - * - * Rewrite, cleanup: - * - * Copyright (C) 2004 Olof Johansson <olof@lixom.net>, IBM Corporation - * Copyright (C) 2006 Olof Johansson <olof@lixom.net> - * - * Dynamic DMA mapping support, iSeries-specific parts. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/dma-mapping.h> -#include <linux/list.h> -#include <linux/pci.h> -#include <linux/export.h> -#include <linux/slab.h> - -#include <asm/iommu.h> -#include <asm/vio.h> -#include <asm/tce.h> -#include <asm/machdep.h> -#include <asm/abs_addr.h> -#include <asm/prom.h> -#include <asm/pci-bridge.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/iseries/hv_call_event.h> -#include <asm/iseries/iommu.h> - -static int tce_build_iSeries(struct iommu_table *tbl, long index, long npages, - unsigned long uaddr, enum dma_data_direction direction, - struct dma_attrs *attrs) -{ - u64 rc; - u64 tce, rpn; - - while (npages--) { - rpn = virt_to_abs(uaddr) >> TCE_SHIFT; - tce = (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; - - if (tbl->it_type == TCE_VB) { - /* Virtual Bus */ - tce |= TCE_VALID|TCE_ALLIO; - if (direction != DMA_TO_DEVICE) - tce |= TCE_VB_WRITE; - } else { - /* PCI Bus */ - tce |= TCE_PCI_READ; /* Read allowed */ - if (direction != DMA_TO_DEVICE) - tce |= TCE_PCI_WRITE; - } - - rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, tce); - if (rc) - panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n", - rc); - index++; - uaddr += TCE_PAGE_SIZE; - } - return 0; -} - -static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) -{ - u64 rc; - - while (npages--) { - rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0); - if (rc) - panic("PCI_DMA: HvCallXm_setTce failed, Rc: 0x%llx\n", - rc); - index++; - } -} - -/* - * Structure passed to HvCallXm_getTceTableParms - */ -struct iommu_table_cb { - unsigned long itc_busno; /* Bus number for this tce table */ - unsigned long itc_start; /* Will be NULL for secondary */ - unsigned long itc_totalsize; /* Size (in pages) of whole table */ - unsigned long itc_offset; /* Index into real tce table of the - start of our section */ - unsigned long itc_size; /* Size (in pages) of our section */ - unsigned long itc_index; /* Index of this tce table */ - unsigned short itc_maxtables; /* Max num of tables for partition */ - unsigned char itc_virtbus; /* Flag to indicate virtual bus */ - unsigned char itc_slotno; /* IOA Tce Slot Index */ - unsigned char itc_rsvd[4]; -}; - -/* - * Call Hv with the architected data structure to get TCE table info. - * info. Put the returned data into the Linux representation of the - * TCE table data. - * The Hardware Tce table comes in three flavors. - * 1. TCE table shared between Buses. - * 2. TCE table per Bus. - * 3. TCE Table per IOA. - */ -void iommu_table_getparms_iSeries(unsigned long busno, - unsigned char slotno, - unsigned char virtbus, - struct iommu_table* tbl) -{ - struct iommu_table_cb *parms; - - parms = kzalloc(sizeof(*parms), GFP_KERNEL); - if (parms == NULL) - panic("PCI_DMA: TCE Table Allocation failed."); - - parms->itc_busno = busno; - parms->itc_slotno = slotno; - parms->itc_virtbus = virtbus; - - HvCallXm_getTceTableParms(iseries_hv_addr(parms)); - - if (parms->itc_size == 0) - panic("PCI_DMA: parms->size is zero, parms is 0x%p", parms); - - /* itc_size is in pages worth of table, it_size is in # of entries */ - tbl->it_size = (parms->itc_size * TCE_PAGE_SIZE) / TCE_ENTRY_SIZE; - tbl->it_busno = parms->itc_busno; - tbl->it_offset = parms->itc_offset; - tbl->it_index = parms->itc_index; - tbl->it_blocksize = 1; - tbl->it_type = virtbus ? TCE_VB : TCE_PCI; - - kfree(parms); -} - - -#ifdef CONFIG_PCI -/* - * This function compares the known tables to find an iommu_table - * that has already been built for hardware TCEs. - */ -static struct iommu_table *iommu_table_find(struct iommu_table * tbl) -{ - struct device_node *node; - - for (node = NULL; (node = of_find_all_nodes(node)); ) { - struct pci_dn *pdn = PCI_DN(node); - struct iommu_table *it; - - if (pdn == NULL) - continue; - it = pdn->iommu_table; - if ((it != NULL) && - (it->it_type == TCE_PCI) && - (it->it_offset == tbl->it_offset) && - (it->it_index == tbl->it_index) && - (it->it_size == tbl->it_size)) { - of_node_put(node); - return it; - } - } - return NULL; -} - - -static void pci_dma_dev_setup_iseries(struct pci_dev *pdev) -{ - struct iommu_table *tbl; - struct device_node *dn = pci_device_to_OF_node(pdev); - struct pci_dn *pdn = PCI_DN(dn); - const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL); - - BUG_ON(lsn == NULL); - - tbl = kzalloc(sizeof(struct iommu_table), GFP_KERNEL); - - iommu_table_getparms_iSeries(pdn->busno, *lsn, 0, tbl); - - /* Look for existing tce table */ - pdn->iommu_table = iommu_table_find(tbl); - if (pdn->iommu_table == NULL) - pdn->iommu_table = iommu_init_table(tbl, -1); - else - kfree(tbl); - set_iommu_table_base(&pdev->dev, pdn->iommu_table); -} -#else -#define pci_dma_dev_setup_iseries NULL -#endif - -static struct iommu_table veth_iommu_table; -static struct iommu_table vio_iommu_table; - -void *iseries_hv_alloc(size_t size, dma_addr_t *dma_handle, gfp_t flag) -{ - return iommu_alloc_coherent(NULL, &vio_iommu_table, size, dma_handle, - DMA_BIT_MASK(32), flag, -1); -} -EXPORT_SYMBOL_GPL(iseries_hv_alloc); - -void iseries_hv_free(size_t size, void *vaddr, dma_addr_t dma_handle) -{ - iommu_free_coherent(&vio_iommu_table, size, vaddr, dma_handle); -} -EXPORT_SYMBOL_GPL(iseries_hv_free); - -dma_addr_t iseries_hv_map(void *vaddr, size_t size, - enum dma_data_direction direction) -{ - return iommu_map_page(NULL, &vio_iommu_table, virt_to_page(vaddr), - (unsigned long)vaddr % PAGE_SIZE, size, - DMA_BIT_MASK(32), direction, NULL); -} - -void iseries_hv_unmap(dma_addr_t dma_handle, size_t size, - enum dma_data_direction direction) -{ - iommu_unmap_page(&vio_iommu_table, dma_handle, size, direction, NULL); -} - -void __init iommu_vio_init(void) -{ - iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table); - veth_iommu_table.it_size /= 2; - vio_iommu_table = veth_iommu_table; - vio_iommu_table.it_offset += veth_iommu_table.it_size; - - if (!iommu_init_table(&veth_iommu_table, -1)) - printk("Virtual Bus VETH TCE table failed.\n"); - if (!iommu_init_table(&vio_iommu_table, -1)) - printk("Virtual Bus VIO TCE table failed.\n"); -} - -struct iommu_table *vio_build_iommu_table_iseries(struct vio_dev *dev) -{ - if (strcmp(dev->type, "network") == 0) - return &veth_iommu_table; - return &vio_iommu_table; -} - -void iommu_init_early_iSeries(void) -{ - ppc_md.tce_build = tce_build_iSeries; - ppc_md.tce_free = tce_free_iSeries; - - ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries; - set_pci_dma_ops(&dma_iommu_ops); -} diff --git a/arch/powerpc/platforms/iseries/ipl_parms.h b/arch/powerpc/platforms/iseries/ipl_parms.h deleted file mode 100644 index 83e4ca42fc5..00000000000 --- a/arch/powerpc/platforms/iseries/ipl_parms.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ISERIES_IPL_PARMS_H -#define _ISERIES_IPL_PARMS_H - -/* - * This struct maps the IPL Parameters DMA'd from the SP. - * - * Warning: - * This data must map in exactly 64 bytes and match the architecture for - * the IPL parms - */ - -#include <asm/types.h> - -struct ItIplParmsReal { - u8 xFormat; // Defines format of IplParms x00-x00 - u8 xRsvd01:6; // Reserved x01-x01 - u8 xAlternateSearch:1; // Alternate search indicator ... - u8 xUaSupplied:1; // UA Supplied on programmed IPL... - u8 xLsUaFormat; // Format byte for UA x02-x02 - u8 xRsvd02; // Reserved x03-x03 - u32 xLsUa; // LS UA x04-x07 - u32 xUnusedLsLid; // First OS LID to load x08-x0B - u16 xLsBusNumber; // LS Bus Number x0C-x0D - u8 xLsCardAdr; // LS Card Address x0E-x0E - u8 xLsBoardAdr; // LS Board Address x0F-x0F - u32 xRsvd03; // Reserved x10-x13 - u8 xSpcnPresent:1; // SPCN present x14-x14 - u8 xCpmPresent:1; // CPM present ... - u8 xRsvd04:6; // Reserved ... - u8 xRsvd05:4; // Reserved x15-x15 - u8 xKeyLock:4; // Keylock setting ... - u8 xRsvd06:6; // Reserved x16-x16 - u8 xIplMode:2; // Ipl mode (A|B|C|D) ... - u8 xHwIplType; // Fast v slow v slow EC HW IPL x17-x17 - u16 xCpmEnabledIpl:1; // CPM in effect when IPL initiatedx18-x19 - u16 xPowerOnResetIpl:1; // Indicate POR condition ... - u16 xMainStorePreserved:1; // Main Storage is preserved ... - u16 xRsvd07:13; // Reserved ... - u16 xIplSource:16; // Ipl source x1A-x1B - u8 xIplReason:8; // Reason for this IPL x1C-x1C - u8 xRsvd08; // Reserved x1D-x1D - u16 xRsvd09; // Reserved x1E-x1F - u16 xSysBoxType; // System Box Type x20-x21 - u16 xSysProcType; // System Processor Type x22-x23 - u32 xRsvd10; // Reserved x24-x27 - u64 xRsvd11; // Reserved x28-x2F - u64 xRsvd12; // Reserved x30-x37 - u64 xRsvd13; // Reserved x38-x3F -}; - -#endif /* _ISERIES_IPL_PARMS_H */ diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c deleted file mode 100644 index 05ce5164caf..00000000000 --- a/arch/powerpc/platforms/iseries/irq.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - * This module supports the iSeries PCI bus interrupt handling - * Copyright (C) 20yy <Robert L Holtorf> <IBM Corp> - * Copyright (C) 2004-2005 IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - * - * Change Activity: - * Created, December 13, 2000 by Wayne Holm - * End Change Activity - */ -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/smp.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/bootmem.h> -#include <linux/irq.h> -#include <linux/spinlock.h> - -#include <asm/paca.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/iseries/it_lp_queue.h> - -#include "irq.h" -#include "pci.h" -#include "call_pci.h" - -#ifdef CONFIG_PCI - -enum pci_event_type { - pe_bus_created = 0, /* PHB has been created */ - pe_bus_error = 1, /* PHB has failed */ - pe_bus_failed = 2, /* Msg to Secondary, Primary failed bus */ - pe_node_failed = 4, /* Multi-adapter bridge has failed */ - pe_node_recovered = 5, /* Multi-adapter bridge has recovered */ - pe_bus_recovered = 12, /* PHB has been recovered */ - pe_unquiese_bus = 18, /* Secondary bus unqiescing */ - pe_bridge_error = 21, /* Bridge Error */ - pe_slot_interrupt = 22 /* Slot interrupt */ -}; - -struct pci_event { - struct HvLpEvent event; - union { - u64 __align; /* Align on an 8-byte boundary */ - struct { - u32 fisr; - HvBusNumber bus_number; - HvSubBusNumber sub_bus_number; - HvAgentId dev_id; - } slot; - struct { - HvBusNumber bus_number; - HvSubBusNumber sub_bus_number; - } bus; - struct { - HvBusNumber bus_number; - HvSubBusNumber sub_bus_number; - HvAgentId dev_id; - } node; - } data; -}; - -static DEFINE_SPINLOCK(pending_irqs_lock); -static int num_pending_irqs; -static int pending_irqs[NR_IRQS]; - -static void int_received(struct pci_event *event) -{ - int irq; - - switch (event->event.xSubtype) { - case pe_slot_interrupt: - irq = event->event.xCorrelationToken; - if (irq < NR_IRQS) { - spin_lock(&pending_irqs_lock); - pending_irqs[irq]++; - num_pending_irqs++; - spin_unlock(&pending_irqs_lock); - } else { - printk(KERN_WARNING "int_received: bad irq number %d\n", - irq); - HvCallPci_eoi(event->data.slot.bus_number, - event->data.slot.sub_bus_number, - event->data.slot.dev_id); - } - break; - /* Ignore error recovery events for now */ - case pe_bus_created: - printk(KERN_INFO "int_received: system bus %d created\n", - event->data.bus.bus_number); - break; - case pe_bus_error: - case pe_bus_failed: - printk(KERN_INFO "int_received: system bus %d failed\n", - event->data.bus.bus_number); - break; - case pe_bus_recovered: - case pe_unquiese_bus: - printk(KERN_INFO "int_received: system bus %d recovered\n", - event->data.bus.bus_number); - break; - case pe_node_failed: - case pe_bridge_error: - printk(KERN_INFO - "int_received: multi-adapter bridge %d/%d/%d failed\n", - event->data.node.bus_number, - event->data.node.sub_bus_number, - event->data.node.dev_id); - break; - case pe_node_recovered: - printk(KERN_INFO - "int_received: multi-adapter bridge %d/%d/%d recovered\n", - event->data.node.bus_number, - event->data.node.sub_bus_number, - event->data.node.dev_id); - break; - default: - printk(KERN_ERR - "int_received: unrecognized event subtype 0x%x\n", - event->event.xSubtype); - break; - } -} - -static void pci_event_handler(struct HvLpEvent *event) -{ - if (event && (event->xType == HvLpEvent_Type_PciIo)) { - if (hvlpevent_is_int(event)) - int_received((struct pci_event *)event); - else - printk(KERN_ERR - "pci_event_handler: unexpected ack received\n"); - } else if (event) - printk(KERN_ERR - "pci_event_handler: Unrecognized PCI event type 0x%x\n", - (int)event->xType); - else - printk(KERN_ERR "pci_event_handler: NULL event received\n"); -} - -#define REAL_IRQ_TO_SUBBUS(irq) (((irq) >> 14) & 0xff) -#define REAL_IRQ_TO_BUS(irq) ((((irq) >> 6) & 0xff) + 1) -#define REAL_IRQ_TO_IDSEL(irq) ((((irq) >> 3) & 7) + 1) -#define REAL_IRQ_TO_FUNC(irq) ((irq) & 7) - -/* - * This will be called by device drivers (via enable_IRQ) - * to enable INTA in the bridge interrupt status register. - */ -static void iseries_enable_IRQ(struct irq_data *d) -{ - u32 bus, dev_id, function, mask; - const u32 sub_bus = 0; - unsigned int rirq = (unsigned int)irqd_to_hwirq(d); - - /* The IRQ has already been locked by the caller */ - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Unmask secondary INTA */ - mask = 0x80000000; - HvCallPci_unmaskInterrupts(bus, sub_bus, dev_id, mask); -} - -/* This is called by iseries_activate_IRQs */ -static unsigned int iseries_startup_IRQ(struct irq_data *d) -{ - u32 bus, dev_id, function, mask; - const u32 sub_bus = 0; - unsigned int rirq = (unsigned int)irqd_to_hwirq(d); - - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Link the IRQ number to the bridge */ - HvCallXm_connectBusUnit(bus, sub_bus, dev_id, d->irq); - - /* Unmask bridge interrupts in the FISR */ - mask = 0x01010000 << function; - HvCallPci_unmaskFisr(bus, sub_bus, dev_id, mask); - iseries_enable_IRQ(d); - return 0; -} - -/* - * This is called out of iSeries_fixup to activate interrupt - * generation for usable slots - */ -void __init iSeries_activate_IRQs() -{ - int irq; - unsigned long flags; - - for_each_irq (irq) { - struct irq_desc *desc = irq_to_desc(irq); - struct irq_chip *chip; - - if (!desc) - continue; - - chip = irq_desc_get_chip(desc); - if (chip && chip->irq_startup) { - raw_spin_lock_irqsave(&desc->lock, flags); - chip->irq_startup(&desc->irq_data); - raw_spin_unlock_irqrestore(&desc->lock, flags); - } - } -} - -/* this is not called anywhere currently */ -static void iseries_shutdown_IRQ(struct irq_data *d) -{ - u32 bus, dev_id, function, mask; - const u32 sub_bus = 0; - unsigned int rirq = (unsigned int)irqd_to_hwirq(d); - - /* irq should be locked by the caller */ - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Invalidate the IRQ number in the bridge */ - HvCallXm_connectBusUnit(bus, sub_bus, dev_id, 0); - - /* Mask bridge interrupts in the FISR */ - mask = 0x01010000 << function; - HvCallPci_maskFisr(bus, sub_bus, dev_id, mask); -} - -/* - * This will be called by device drivers (via disable_IRQ) - * to disable INTA in the bridge interrupt status register. - */ -static void iseries_disable_IRQ(struct irq_data *d) -{ - u32 bus, dev_id, function, mask; - const u32 sub_bus = 0; - unsigned int rirq = (unsigned int)irqd_to_hwirq(d); - - /* The IRQ has already been locked by the caller */ - bus = REAL_IRQ_TO_BUS(rirq); - function = REAL_IRQ_TO_FUNC(rirq); - dev_id = (REAL_IRQ_TO_IDSEL(rirq) << 4) + function; - - /* Mask secondary INTA */ - mask = 0x80000000; - HvCallPci_maskInterrupts(bus, sub_bus, dev_id, mask); -} - -static void iseries_end_IRQ(struct irq_data *d) -{ - unsigned int rirq = (unsigned int)irqd_to_hwirq(d); - - HvCallPci_eoi(REAL_IRQ_TO_BUS(rirq), REAL_IRQ_TO_SUBBUS(rirq), - (REAL_IRQ_TO_IDSEL(rirq) << 4) + REAL_IRQ_TO_FUNC(rirq)); -} - -static struct irq_chip iseries_pic = { - .name = "iSeries", - .irq_startup = iseries_startup_IRQ, - .irq_shutdown = iseries_shutdown_IRQ, - .irq_unmask = iseries_enable_IRQ, - .irq_mask = iseries_disable_IRQ, - .irq_eoi = iseries_end_IRQ -}; - -/* - * This is called out of iSeries_scan_slot to allocate an IRQ for an EADS slot - * It calculates the irq value for the slot. - * Note that sub_bus is always 0 (at the moment at least). - */ -int __init iSeries_allocate_IRQ(HvBusNumber bus, - HvSubBusNumber sub_bus, u32 bsubbus) -{ - unsigned int realirq; - u8 idsel = ISERIES_GET_DEVICE_FROM_SUBBUS(bsubbus); - u8 function = ISERIES_GET_FUNCTION_FROM_SUBBUS(bsubbus); - - realirq = (((((sub_bus << 8) + (bus - 1)) << 3) + (idsel - 1)) << 3) - + function; - - return irq_create_mapping(NULL, realirq); -} - -#endif /* CONFIG_PCI */ - -/* - * Get the next pending IRQ. - */ -unsigned int iSeries_get_irq(void) -{ - int irq = NO_IRQ_IGNORE; - -#ifdef CONFIG_SMP - if (get_lppaca()->int_dword.fields.ipi_cnt) { - get_lppaca()->int_dword.fields.ipi_cnt = 0; - smp_ipi_demux(); - } -#endif /* CONFIG_SMP */ - if (hvlpevent_is_pending()) - process_hvlpevents(); - -#ifdef CONFIG_PCI - if (num_pending_irqs) { - spin_lock(&pending_irqs_lock); - for (irq = 0; irq < NR_IRQS; irq++) { - if (pending_irqs[irq]) { - pending_irqs[irq]--; - num_pending_irqs--; - break; - } - } - spin_unlock(&pending_irqs_lock); - if (irq >= NR_IRQS) - irq = NO_IRQ_IGNORE; - } -#endif - - return irq; -} - -#ifdef CONFIG_PCI - -static int iseries_irq_host_map(struct irq_domain *h, unsigned int virq, - irq_hw_number_t hw) -{ - irq_set_chip_and_handler(virq, &iseries_pic, handle_fasteoi_irq); - - return 0; -} - -static int iseries_irq_host_match(struct irq_domain *h, struct device_node *np) -{ - /* Match all */ - return 1; -} - -static const struct irq_domain_ops iseries_irq_domain_ops = { - .map = iseries_irq_host_map, - .match = iseries_irq_host_match, -}; - -/* - * This is called by init_IRQ. set in ppc_md.init_IRQ by iSeries_setup.c - * It must be called before the bus walk. - */ -void __init iSeries_init_IRQ(void) -{ - /* Register PCI event handler and open an event path */ - struct irq_domain *host; - int ret; - - /* - * The Hypervisor only allows us up to 256 interrupt - * sources (the irq number is passed in a u8). - */ - irq_set_virq_count(256); - - /* Create irq host. No need for a revmap since HV will give us - * back our virtual irq number - */ - host = irq_domain_add_nomap(NULL, &iseries_irq_domain_ops, NULL); - BUG_ON(host == NULL); - irq_set_default_host(host); - - ret = HvLpEvent_registerHandler(HvLpEvent_Type_PciIo, - &pci_event_handler); - if (ret == 0) { - ret = HvLpEvent_openPath(HvLpEvent_Type_PciIo, 0); - if (ret != 0) - printk(KERN_ERR "iseries_init_IRQ: open event path " - "failed with rc 0x%x\n", ret); - } else - printk(KERN_ERR "iseries_init_IRQ: register handler " - "failed with rc 0x%x\n", ret); -} - -#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/platforms/iseries/irq.h b/arch/powerpc/platforms/iseries/irq.h deleted file mode 100644 index a1c23607403..00000000000 --- a/arch/powerpc/platforms/iseries/irq.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _ISERIES_IRQ_H -#define _ISERIES_IRQ_H - -#ifdef CONFIG_PCI -extern void iSeries_init_IRQ(void); -extern int iSeries_allocate_IRQ(HvBusNumber, HvSubBusNumber, u32); -extern void iSeries_activate_IRQs(void); -#else -#define iSeries_init_IRQ NULL -#endif -extern unsigned int iSeries_get_irq(void); - -#endif /* _ISERIES_IRQ_H */ diff --git a/arch/powerpc/platforms/iseries/it_exp_vpd_panel.h b/arch/powerpc/platforms/iseries/it_exp_vpd_panel.h deleted file mode 100644 index 6de9097b7f5..00000000000 --- a/arch/powerpc/platforms/iseries/it_exp_vpd_panel.h +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright (C) 2002 Dave Boutcher IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _PLATFORMS_ISERIES_IT_EXT_VPD_PANEL_H -#define _PLATFORMS_ISERIES_IT_EXT_VPD_PANEL_H - -/* - * This struct maps the panel information - * - * Warning: - * This data must match the architecture for the panel information - */ - -#include <asm/types.h> - -struct ItExtVpdPanel { - /* Definition of the Extended Vpd On Panel Data Area */ - char systemSerial[8]; - char mfgID[4]; - char reserved1[24]; - char machineType[4]; - char systemID[6]; - char somUniqueCnt[4]; - char serialNumberCount; - char reserved2[7]; - u16 bbu3; - u16 bbu2; - u16 bbu1; - char xLocationLabel[8]; - u8 xRsvd1[6]; - u16 xFrameId; - u8 xRsvd2[48]; -}; - -extern struct ItExtVpdPanel xItExtVpdPanel; - -#endif /* _PLATFORMS_ISERIES_IT_EXT_VPD_PANEL_H */ diff --git a/arch/powerpc/platforms/iseries/it_lp_naca.h b/arch/powerpc/platforms/iseries/it_lp_naca.h deleted file mode 100644 index cf6dcf6ef07..00000000000 --- a/arch/powerpc/platforms/iseries/it_lp_naca.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _PLATFORMS_ISERIES_IT_LP_NACA_H -#define _PLATFORMS_ISERIES_IT_LP_NACA_H - -#include <linux/types.h> - -/* - * This control block contains the data that is shared between the - * hypervisor (PLIC) and the OS. - */ - -struct ItLpNaca { -// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data - u32 xDesc; // Eye catcher x00-x03 - u16 xSize; // Size of this class x04-x05 - u16 xIntHdlrOffset; // Offset to IntHdlr array x06-x07 - u8 xMaxIntHdlrEntries; // Number of entries in array x08-x08 - u8 xPrimaryLpIndex; // LP Index of Primary x09-x09 - u8 xServiceLpIndex; // LP Ind of Service Focal Pointx0A-x0A - u8 xLpIndex; // LP Index x0B-x0B - u16 xMaxLpQueues; // Number of allocated queues x0C-x0D - u16 xLpQueueOffset; // Offset to start of LP queues x0E-x0F - u8 xPirEnvironMode; // Piranha or hardware x10-x10 - u8 xPirConsoleMode; // Piranha console indicator x11-x11 - u8 xPirDasdMode; // Piranha dasd indicator x12-x12 - u8 xRsvd1_0[5]; // Reserved for Piranha related x13-x17 - u8 flags; // flags, see below x18-x1F - u8 xSpVpdFormat; // VPD areas are in CSP format ... - u8 xIntProcRatio; // Ratio of int procs to procs ... - u8 xRsvd1_2[5]; // Reserved ... - u16 xRsvd1_3; // Reserved x20-x21 - u16 xPlicVrmIndex; // VRM index of PLIC x22-x23 - u16 xMinSupportedSlicVrmInd;// Min supported OS VRM index x24-x25 - u16 xMinCompatableSlicVrmInd;// Min compatible OS VRM index x26-x27 - u64 xLoadAreaAddr; // ER address of load area x28-x2F - u32 xLoadAreaChunks; // Chunks for the load area x30-x33 - u32 xPaseSysCallCRMask; // Mask used to test CR before x34-x37 - // doing an ASR switch on PASE - // system call. - u64 xSlicSegmentTablePtr; // Pointer to Slic seg table. x38-x3f - u8 xRsvd1_4[64]; // x40-x7F - -// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data - u8 xRsvd2_0[128]; // Reserved x00-x7F - -// CACHE_LINE_3-6 0x0100 - 0x02FF Contains LP Queue indicators -// NB: Padding required to keep xInterruptHdlr at x300 which is required -// for v4r4 PLIC. - u8 xOldLpQueue[128]; // LP Queue needed for v4r4 100-17F - u8 xRsvd3_0[384]; // Reserved 180-2FF - -// CACHE_LINE_7-8 0x0300 - 0x03FF Contains the address of the OS interrupt -// handlers - u64 xInterruptHdlr[32]; // Interrupt handlers 300-x3FF -}; - -extern struct ItLpNaca itLpNaca; - -#define ITLPNACA_LPAR 0x80 /* Is LPAR installed on the system */ -#define ITLPNACA_PARTITIONED 0x40 /* Is the system partitioned */ -#define ITLPNACA_HWSYNCEDTBS 0x20 /* Hardware synced TBs */ -#define ITLPNACA_HMTINT 0x10 /* Utilize MHT for interrupts */ - -#endif /* _PLATFORMS_ISERIES_IT_LP_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/ksyms.c b/arch/powerpc/platforms/iseries/ksyms.c deleted file mode 100644 index 997e234fb8b..00000000000 --- a/arch/powerpc/platforms/iseries/ksyms.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) 2001-2005 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/export.h> - -#include <asm/hw_irq.h> -#include <asm/iseries/hv_call_sc.h> - -EXPORT_SYMBOL(HvCall0); -EXPORT_SYMBOL(HvCall1); -EXPORT_SYMBOL(HvCall2); -EXPORT_SYMBOL(HvCall3); -EXPORT_SYMBOL(HvCall4); -EXPORT_SYMBOL(HvCall5); -EXPORT_SYMBOL(HvCall6); -EXPORT_SYMBOL(HvCall7); diff --git a/arch/powerpc/platforms/iseries/lpardata.c b/arch/powerpc/platforms/iseries/lpardata.c deleted file mode 100644 index 00e0ec813a1..00000000000 --- a/arch/powerpc/platforms/iseries/lpardata.c +++ /dev/null @@ -1,318 +0,0 @@ -/* - * Copyright 2001 Mike Corrigan, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/types.h> -#include <linux/threads.h> -#include <linux/bitops.h> -#include <asm/processor.h> -#include <asm/ptrace.h> -#include <asm/abs_addr.h> -#include <asm/lppaca.h> -#include <asm/paca.h> -#include <asm/iseries/lpar_map.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/iseries/alpaca.h> - -#include "naca.h" -#include "vpd_areas.h" -#include "spcomm_area.h" -#include "ipl_parms.h" -#include "processor_vpd.h" -#include "release_data.h" -#include "it_exp_vpd_panel.h" -#include "it_lp_naca.h" - -/* The HvReleaseData is the root of the information shared between - * the hypervisor and Linux. - */ -const struct HvReleaseData hvReleaseData = { - .xDesc = 0xc8a5d9c4, /* "HvRD" ebcdic */ - .xSize = sizeof(struct HvReleaseData), - .xVpdAreasPtrOffset = offsetof(struct naca_struct, xItVpdAreas), - .xSlicNacaAddr = &naca, /* 64-bit Naca address */ - .xMsNucDataOffset = LPARMAP_PHYS, - .xFlags = HVREL_TAGSINACTIVE /* tags inactive */ - /* 64 bit */ - /* shared processors */ - /* HMT allowed */ - | 6, /* TEMP: This allows non-GA driver */ - .xVrmIndex = 4, /* We are v5r2m0 */ - .xMinSupportedPlicVrmIndex = 3, /* v5r1m0 */ - .xMinCompatablePlicVrmIndex = 3, /* v5r1m0 */ - .xVrmName = { 0xd3, 0x89, 0x95, 0xa4, /* "Linux 2.4.64" ebcdic */ - 0xa7, 0x40, 0xf2, 0x4b, - 0xf4, 0x4b, 0xf6, 0xf4 }, -}; - -/* - * The NACA. The first dword of the naca is required by the iSeries - * hypervisor to point to itVpdAreas. The hypervisor finds the NACA - * through the pointer in hvReleaseData. - */ -struct naca_struct naca = { - .xItVpdAreas = &itVpdAreas, - .xRamDisk = 0, - .xRamDiskSize = 0, -}; - -struct ItLpRegSave { - u32 xDesc; // Eye catcher "LpRS" ebcdic 000-003 - u16 xSize; // Size of this class 004-005 - u8 xInUse; // Area is live 006-007 - u8 xRsvd1[9]; // Reserved 007-00F - - u8 xFixedRegSave[352]; // Fixed Register Save Area 010-16F - u32 xCTRL; // Control Register 170-173 - u32 xDEC; // Decrementer 174-177 - u32 xFPSCR; // FP Status and Control Reg 178-17B - u32 xPVR; // Processor Version Number 17C-17F - - u64 xMMCR0; // Monitor Mode Control Reg 0 180-187 - u32 xPMC1; // Perf Monitor Counter 1 188-18B - u32 xPMC2; // Perf Monitor Counter 2 18C-18F - u32 xPMC3; // Perf Monitor Counter 3 190-193 - u32 xPMC4; // Perf Monitor Counter 4 194-197 - u32 xPIR; // Processor ID Reg 198-19B - - u32 xMMCR1; // Monitor Mode Control Reg 1 19C-19F - u32 xMMCRA; // Monitor Mode Control Reg A 1A0-1A3 - u32 xPMC5; // Perf Monitor Counter 5 1A4-1A7 - u32 xPMC6; // Perf Monitor Counter 6 1A8-1AB - u32 xPMC7; // Perf Monitor Counter 7 1AC-1AF - u32 xPMC8; // Perf Monitor Counter 8 1B0-1B3 - u32 xTSC; // Thread Switch Control 1B4-1B7 - u32 xTST; // Thread Switch Timeout 1B8-1BB - u32 xRsvd; // Reserved 1BC-1BF - - u64 xACCR; // Address Compare Control Reg 1C0-1C7 - u64 xIMR; // Instruction Match Register 1C8-1CF - u64 xSDR1; // Storage Description Reg 1 1D0-1D7 - u64 xSPRG0; // Special Purpose Reg General0 1D8-1DF - u64 xSPRG1; // Special Purpose Reg General1 1E0-1E7 - u64 xSPRG2; // Special Purpose Reg General2 1E8-1EF - u64 xSPRG3; // Special Purpose Reg General3 1F0-1F7 - u64 xTB; // Time Base Register 1F8-1FF - - u64 xFPR[32]; // Floating Point Registers 200-2FF - - u64 xMSR; // Machine State Register 300-307 - u64 xNIA; // Next Instruction Address 308-30F - - u64 xDABR; // Data Address Breakpoint Reg 310-317 - u64 xIABR; // Inst Address Breakpoint Reg 318-31F - - u64 xHID0; // HW Implementation Dependent0 320-327 - - u64 xHID4; // HW Implementation Dependent4 328-32F - u64 xSCOMd; // SCON Data Reg (SPRG4) 330-337 - u64 xSCOMc; // SCON Command Reg (SPRG5) 338-33F - u64 xSDAR; // Sample Data Address Register 340-347 - u64 xSIAR; // Sample Inst Address Register 348-34F - - u8 xRsvd3[176]; // Reserved 350-3FF -}; - -extern void system_reset_iSeries(void); -extern void machine_check_iSeries(void); -extern void data_access_iSeries(void); -extern void instruction_access_iSeries(void); -extern void hardware_interrupt_iSeries(void); -extern void alignment_iSeries(void); -extern void program_check_iSeries(void); -extern void fp_unavailable_iSeries(void); -extern void decrementer_iSeries(void); -extern void trap_0a_iSeries(void); -extern void trap_0b_iSeries(void); -extern void system_call_iSeries(void); -extern void single_step_iSeries(void); -extern void trap_0e_iSeries(void); -extern void performance_monitor_iSeries(void); -extern void data_access_slb_iSeries(void); -extern void instruction_access_slb_iSeries(void); - -struct ItLpNaca itLpNaca = { - .xDesc = 0xd397d581, /* "LpNa" ebcdic */ - .xSize = 0x0400, /* size of ItLpNaca */ - .xIntHdlrOffset = 0x0300, /* offset to int array */ - .xMaxIntHdlrEntries = 19, /* # ents */ - .xPrimaryLpIndex = 0, /* Part # of primary */ - .xServiceLpIndex = 0, /* Part # of serv */ - .xLpIndex = 0, /* Part # of me */ - .xMaxLpQueues = 0, /* # of LP queues */ - .xLpQueueOffset = 0x100, /* offset of start of LP queues */ - .xPirEnvironMode = 0, /* Piranha stuff */ - .xPirConsoleMode = 0, - .xPirDasdMode = 0, - .flags = 0, - .xSpVpdFormat = 0, - .xIntProcRatio = 0, - .xPlicVrmIndex = 0, /* VRM index of PLIC */ - .xMinSupportedSlicVrmInd = 0, /* min supported SLIC */ - .xMinCompatableSlicVrmInd = 0, /* min compat SLIC */ - .xLoadAreaAddr = 0, /* 64-bit addr of load area */ - .xLoadAreaChunks = 0, /* chunks for load area */ - .xPaseSysCallCRMask = 0, /* PASE mask */ - .xSlicSegmentTablePtr = 0, /* seg table */ - .xOldLpQueue = { 0 }, /* Old LP Queue */ - .xInterruptHdlr = { - (u64)system_reset_iSeries, /* 0x100 System Reset */ - (u64)machine_check_iSeries, /* 0x200 Machine Check */ - (u64)data_access_iSeries, /* 0x300 Data Access */ - (u64)instruction_access_iSeries, /* 0x400 Instruction Access */ - (u64)hardware_interrupt_iSeries, /* 0x500 External */ - (u64)alignment_iSeries, /* 0x600 Alignment */ - (u64)program_check_iSeries, /* 0x700 Program Check */ - (u64)fp_unavailable_iSeries, /* 0x800 FP Unavailable */ - (u64)decrementer_iSeries, /* 0x900 Decrementer */ - (u64)trap_0a_iSeries, /* 0xa00 Trap 0A */ - (u64)trap_0b_iSeries, /* 0xb00 Trap 0B */ - (u64)system_call_iSeries, /* 0xc00 System Call */ - (u64)single_step_iSeries, /* 0xd00 Single Step */ - (u64)trap_0e_iSeries, /* 0xe00 Trap 0E */ - (u64)performance_monitor_iSeries,/* 0xf00 Performance Monitor */ - 0, /* int 0x1000 */ - 0, /* int 0x1010 */ - 0, /* int 0x1020 CPU ctls */ - (u64)hardware_interrupt_iSeries, /* SC Ret Hdlr */ - (u64)data_access_slb_iSeries, /* 0x380 D-SLB */ - (u64)instruction_access_slb_iSeries /* 0x480 I-SLB */ - } -}; - -/* May be filled in by the hypervisor so cannot end up in the BSS */ -static struct ItIplParmsReal xItIplParmsReal __attribute__((__section__(".data"))); - -/* May be filled in by the hypervisor so cannot end up in the BSS */ -struct ItExtVpdPanel xItExtVpdPanel __attribute__((__section__(".data"))); - -#define maxPhysicalProcessors 32 - -struct IoHriProcessorVpd xIoHriProcessorVpd[maxPhysicalProcessors] = { - { - .xInstCacheOperandSize = 32, - .xDataCacheOperandSize = 32, - .xProcFreq = 50000000, - .xTimeBaseFreq = 50000000, - .xPVR = 0x3600 - } -}; - -/* Space for Main Store Vpd 27,200 bytes */ -/* May be filled in by the hypervisor so cannot end up in the BSS */ -u64 xMsVpd[3400] __attribute__((__section__(".data"))); - -/* Space for Recovery Log Buffer */ -/* May be filled in by the hypervisor so cannot end up in the BSS */ -static u64 xRecoveryLogBuffer[32] __attribute__((__section__(".data"))); - -static const struct SpCommArea xSpCommArea = { - .xDesc = 0xE2D7C3C2, - .xFormat = 1, -}; - -static const struct ItLpRegSave iseries_reg_save[] = { - [0 ... (NR_CPUS-1)] = { - .xDesc = 0xd397d9e2, /* "LpRS" */ - .xSize = sizeof(struct ItLpRegSave), - }, -}; - -#define ALPACA_INIT(number) \ -{ \ - .lppaca_ptr = &lppaca[number], \ - .reg_save_ptr = &iseries_reg_save[number], \ -} - -const struct alpaca alpaca[] = { - ALPACA_INIT( 0), -#if NR_CPUS > 1 - ALPACA_INIT( 1), ALPACA_INIT( 2), ALPACA_INIT( 3), -#if NR_CPUS > 4 - ALPACA_INIT( 4), ALPACA_INIT( 5), ALPACA_INIT( 6), ALPACA_INIT( 7), -#if NR_CPUS > 8 - ALPACA_INIT( 8), ALPACA_INIT( 9), ALPACA_INIT(10), ALPACA_INIT(11), - ALPACA_INIT(12), ALPACA_INIT(13), ALPACA_INIT(14), ALPACA_INIT(15), - ALPACA_INIT(16), ALPACA_INIT(17), ALPACA_INIT(18), ALPACA_INIT(19), - ALPACA_INIT(20), ALPACA_INIT(21), ALPACA_INIT(22), ALPACA_INIT(23), - ALPACA_INIT(24), ALPACA_INIT(25), ALPACA_INIT(26), ALPACA_INIT(27), - ALPACA_INIT(28), ALPACA_INIT(29), ALPACA_INIT(30), ALPACA_INIT(31), -#if NR_CPUS > 32 - ALPACA_INIT(32), ALPACA_INIT(33), ALPACA_INIT(34), ALPACA_INIT(35), - ALPACA_INIT(36), ALPACA_INIT(37), ALPACA_INIT(38), ALPACA_INIT(39), - ALPACA_INIT(40), ALPACA_INIT(41), ALPACA_INIT(42), ALPACA_INIT(43), - ALPACA_INIT(44), ALPACA_INIT(45), ALPACA_INIT(46), ALPACA_INIT(47), - ALPACA_INIT(48), ALPACA_INIT(49), ALPACA_INIT(50), ALPACA_INIT(51), - ALPACA_INIT(52), ALPACA_INIT(53), ALPACA_INIT(54), ALPACA_INIT(55), - ALPACA_INIT(56), ALPACA_INIT(57), ALPACA_INIT(58), ALPACA_INIT(59), - ALPACA_INIT(60), ALPACA_INIT(61), ALPACA_INIT(62), ALPACA_INIT(63), -#endif -#endif -#endif -#endif -}; - -/* The LparMap data is now located at offset 0x6000 in head.S - * It was put there so that the HvReleaseData could address it - * with a 32-bit offset as required by the iSeries hypervisor - * - * The Naca has a pointer to the ItVpdAreas. The hypervisor finds - * the Naca via the HvReleaseData area. The HvReleaseData has the - * offset into the Naca of the pointer to the ItVpdAreas. - */ -const struct ItVpdAreas itVpdAreas = { - .xSlicDesc = 0xc9a3e5c1, /* "ItVA" */ - .xSlicSize = sizeof(struct ItVpdAreas), - .xSlicVpdEntries = ItVpdMaxEntries, /* # VPD array entries */ - .xSlicDmaEntries = ItDmaMaxEntries, /* # DMA array entries */ - .xSlicMaxLogicalProcs = NR_CPUS * 2, /* Max logical procs */ - .xSlicMaxPhysicalProcs = maxPhysicalProcessors, /* Max physical procs */ - .xSlicDmaToksOffset = offsetof(struct ItVpdAreas, xPlicDmaToks), - .xSlicVpdAdrsOffset = offsetof(struct ItVpdAreas, xSlicVpdAdrs), - .xSlicDmaLensOffset = offsetof(struct ItVpdAreas, xPlicDmaLens), - .xSlicVpdLensOffset = offsetof(struct ItVpdAreas, xSlicVpdLens), - .xSlicMaxSlotLabels = 0, /* max slot labels */ - .xSlicMaxLpQueues = 1, /* max LP queues */ - .xPlicDmaLens = { 0 }, /* DMA lengths */ - .xPlicDmaToks = { 0 }, /* DMA tokens */ - .xSlicVpdLens = { /* VPD lengths */ - 0,0,0, /* 0 - 2 */ - sizeof(xItExtVpdPanel), /* 3 Extended VPD */ - sizeof(struct alpaca), /* 4 length of (fake) Paca */ - 0, /* 5 */ - sizeof(struct ItIplParmsReal),/* 6 length of IPL parms */ - 26992, /* 7 length of MS VPD */ - 0, /* 8 */ - sizeof(struct ItLpNaca),/* 9 length of LP Naca */ - 0, /* 10 */ - 256, /* 11 length of Recovery Log Buf */ - sizeof(struct SpCommArea), /* 12 length of SP Comm Area */ - 0,0,0, /* 13 - 15 */ - sizeof(struct IoHriProcessorVpd),/* 16 length of Proc Vpd */ - 0,0,0,0,0,0, /* 17 - 22 */ - sizeof(struct hvlpevent_queue), /* 23 length of Lp Queue */ - 0,0 /* 24 - 25 */ - }, - .xSlicVpdAdrs = { /* VPD addresses */ - 0,0,0, /* 0 - 2 */ - &xItExtVpdPanel, /* 3 Extended VPD */ - &alpaca[0], /* 4 first (fake) Paca */ - 0, /* 5 */ - &xItIplParmsReal, /* 6 IPL parms */ - &xMsVpd, /* 7 MS Vpd */ - 0, /* 8 */ - &itLpNaca, /* 9 LpNaca */ - 0, /* 10 */ - &xRecoveryLogBuffer, /* 11 Recovery Log Buffer */ - &xSpCommArea, /* 12 SP Comm Area */ - 0,0,0, /* 13 - 15 */ - &xIoHriProcessorVpd, /* 16 Proc Vpd */ - 0,0,0,0,0,0, /* 17 - 22 */ - &hvlpevent_queue, /* 23 Lp Queue */ - 0,0 - } -}; diff --git a/arch/powerpc/platforms/iseries/lpevents.c b/arch/powerpc/platforms/iseries/lpevents.c deleted file mode 100644 index 202e22798d3..00000000000 --- a/arch/powerpc/platforms/iseries/lpevents.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/stddef.h> -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/bootmem.h> -#include <linux/seq_file.h> -#include <linux/proc_fs.h> -#include <linux/export.h> - -#include <asm/system.h> -#include <asm/paca.h> -#include <asm/firmware.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/hv_call_event.h> -#include "it_lp_naca.h" - -/* - * The LpQueue is used to pass event data from the hypervisor to - * the partition. This is where I/O interrupt events are communicated. - * - * It is written to by the hypervisor so cannot end up in the BSS. - */ -struct hvlpevent_queue hvlpevent_queue __attribute__((__section__(".data"))); - -DEFINE_PER_CPU(unsigned long[HvLpEvent_Type_NumTypes], hvlpevent_counts); - -static char *event_types[HvLpEvent_Type_NumTypes] = { - "Hypervisor", - "Machine Facilities", - "Session Manager", - "SPD I/O", - "Virtual Bus", - "PCI I/O", - "RIO I/O", - "Virtual Lan", - "Virtual I/O" -}; - -/* Array of LpEvent handler functions */ -static LpEventHandler lpEventHandler[HvLpEvent_Type_NumTypes]; -static unsigned lpEventHandlerPaths[HvLpEvent_Type_NumTypes]; - -static struct HvLpEvent * get_next_hvlpevent(void) -{ - struct HvLpEvent * event; - event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; - - if (hvlpevent_is_valid(event)) { - /* rmb() needed only for weakly consistent machines (regatta) */ - rmb(); - /* Set pointer to next potential event */ - hvlpevent_queue.hq_current_event += ((event->xSizeMinus1 + - IT_LP_EVENT_ALIGN) / IT_LP_EVENT_ALIGN) * - IT_LP_EVENT_ALIGN; - - /* Wrap to beginning if no room at end */ - if (hvlpevent_queue.hq_current_event > - hvlpevent_queue.hq_last_event) { - hvlpevent_queue.hq_current_event = - hvlpevent_queue.hq_event_stack; - } - } else { - event = NULL; - } - - return event; -} - -static unsigned long spread_lpevents = NR_CPUS; - -int hvlpevent_is_pending(void) -{ - struct HvLpEvent *next_event; - - if (smp_processor_id() >= spread_lpevents) - return 0; - - next_event = (struct HvLpEvent *)hvlpevent_queue.hq_current_event; - - return hvlpevent_is_valid(next_event) || - hvlpevent_queue.hq_overflow_pending; -} - -static void hvlpevent_clear_valid(struct HvLpEvent * event) -{ - /* Tell the Hypervisor that we're done with this event. - * Also clear bits within this event that might look like valid bits. - * ie. on 64-byte boundaries. - */ - struct HvLpEvent *tmp; - unsigned extra = ((event->xSizeMinus1 + IT_LP_EVENT_ALIGN) / - IT_LP_EVENT_ALIGN) - 1; - - switch (extra) { - case 3: - tmp = (struct HvLpEvent*)((char*)event + 3 * IT_LP_EVENT_ALIGN); - hvlpevent_invalidate(tmp); - case 2: - tmp = (struct HvLpEvent*)((char*)event + 2 * IT_LP_EVENT_ALIGN); - hvlpevent_invalidate(tmp); - case 1: - tmp = (struct HvLpEvent*)((char*)event + 1 * IT_LP_EVENT_ALIGN); - hvlpevent_invalidate(tmp); - } - - mb(); - - hvlpevent_invalidate(event); -} - -void process_hvlpevents(void) -{ - struct HvLpEvent * event; - - restart: - /* If we have recursed, just return */ - if (!spin_trylock(&hvlpevent_queue.hq_lock)) - return; - - for (;;) { - event = get_next_hvlpevent(); - if (event) { - /* Call appropriate handler here, passing - * a pointer to the LpEvent. The handler - * must make a copy of the LpEvent if it - * needs it in a bottom half. (perhaps for - * an ACK) - * - * Handlers are responsible for ACK processing - * - * The Hypervisor guarantees that LpEvents will - * only be delivered with types that we have - * registered for, so no type check is necessary - * here! - */ - if (event->xType < HvLpEvent_Type_NumTypes) - __get_cpu_var(hvlpevent_counts)[event->xType]++; - if (event->xType < HvLpEvent_Type_NumTypes && - lpEventHandler[event->xType]) - lpEventHandler[event->xType](event); - else { - u8 type = event->xType; - - /* - * Don't printk in the spinlock as printk - * may require ack events form the HV to send - * any characters there. - */ - hvlpevent_clear_valid(event); - spin_unlock(&hvlpevent_queue.hq_lock); - printk(KERN_INFO - "Unexpected Lp Event type=%d\n", type); - goto restart; - } - - hvlpevent_clear_valid(event); - } else if (hvlpevent_queue.hq_overflow_pending) - /* - * No more valid events. If overflow events are - * pending process them - */ - HvCallEvent_getOverflowLpEvents(hvlpevent_queue.hq_index); - else - break; - } - - spin_unlock(&hvlpevent_queue.hq_lock); -} - -static int set_spread_lpevents(char *str) -{ - unsigned long val = simple_strtoul(str, NULL, 0); - - /* - * The parameter is the number of processors to share in processing - * lp events. - */ - if (( val > 0) && (val <= NR_CPUS)) { - spread_lpevents = val; - printk("lpevent processing spread over %ld processors\n", val); - } else { - printk("invalid spread_lpevents %ld\n", val); - } - - return 1; -} -__setup("spread_lpevents=", set_spread_lpevents); - -void __init setup_hvlpevent_queue(void) -{ - void *eventStack; - - spin_lock_init(&hvlpevent_queue.hq_lock); - - /* Allocate a page for the Event Stack. */ - eventStack = alloc_bootmem_pages(IT_LP_EVENT_STACK_SIZE); - memset(eventStack, 0, IT_LP_EVENT_STACK_SIZE); - - /* Invoke the hypervisor to initialize the event stack */ - HvCallEvent_setLpEventStack(0, eventStack, IT_LP_EVENT_STACK_SIZE); - - hvlpevent_queue.hq_event_stack = eventStack; - hvlpevent_queue.hq_current_event = eventStack; - hvlpevent_queue.hq_last_event = (char *)eventStack + - (IT_LP_EVENT_STACK_SIZE - IT_LP_EVENT_MAX_SIZE); - hvlpevent_queue.hq_index = 0; -} - -/* Register a handler for an LpEvent type */ -int HvLpEvent_registerHandler(HvLpEvent_Type eventType, LpEventHandler handler) -{ - if (eventType < HvLpEvent_Type_NumTypes) { - lpEventHandler[eventType] = handler; - return 0; - } - return 1; -} -EXPORT_SYMBOL(HvLpEvent_registerHandler); - -int HvLpEvent_unregisterHandler(HvLpEvent_Type eventType) -{ - might_sleep(); - - if (eventType < HvLpEvent_Type_NumTypes) { - if (!lpEventHandlerPaths[eventType]) { - lpEventHandler[eventType] = NULL; - /* - * We now sleep until all other CPUs have scheduled. - * This ensures that the deletion is seen by all - * other CPUs, and that the deleted handler isn't - * still running on another CPU when we return. - */ - synchronize_sched(); - return 0; - } - } - return 1; -} -EXPORT_SYMBOL(HvLpEvent_unregisterHandler); - -/* - * lpIndex is the partition index of the target partition. - * needed only for VirtualIo, VirtualLan and SessionMgr. Zero - * indicates to use our partition index - for the other types. - */ -int HvLpEvent_openPath(HvLpEvent_Type eventType, HvLpIndex lpIndex) -{ - if ((eventType < HvLpEvent_Type_NumTypes) && - lpEventHandler[eventType]) { - if (lpIndex == 0) - lpIndex = itLpNaca.xLpIndex; - HvCallEvent_openLpEventPath(lpIndex, eventType); - ++lpEventHandlerPaths[eventType]; - return 0; - } - return 1; -} - -int HvLpEvent_closePath(HvLpEvent_Type eventType, HvLpIndex lpIndex) -{ - if ((eventType < HvLpEvent_Type_NumTypes) && - lpEventHandler[eventType] && - lpEventHandlerPaths[eventType]) { - if (lpIndex == 0) - lpIndex = itLpNaca.xLpIndex; - HvCallEvent_closeLpEventPath(lpIndex, eventType); - --lpEventHandlerPaths[eventType]; - return 0; - } - return 1; -} - -static int proc_lpevents_show(struct seq_file *m, void *v) -{ - int cpu, i; - unsigned long sum; - static unsigned long cpu_totals[NR_CPUS]; - - /* FIXME: do we care that there's no locking here? */ - sum = 0; - for_each_online_cpu(cpu) { - cpu_totals[cpu] = 0; - for (i = 0; i < HvLpEvent_Type_NumTypes; i++) { - cpu_totals[cpu] += per_cpu(hvlpevent_counts, cpu)[i]; - } - sum += cpu_totals[cpu]; - } - - seq_printf(m, "LpEventQueue 0\n"); - seq_printf(m, " events processed:\t%lu\n", sum); - - for (i = 0; i < HvLpEvent_Type_NumTypes; ++i) { - sum = 0; - for_each_online_cpu(cpu) { - sum += per_cpu(hvlpevent_counts, cpu)[i]; - } - - seq_printf(m, " %-20s %10lu\n", event_types[i], sum); - } - - seq_printf(m, "\n events processed by processor:\n"); - - for_each_online_cpu(cpu) { - seq_printf(m, " CPU%02d %10lu\n", cpu, cpu_totals[cpu]); - } - - return 0; -} - -static int proc_lpevents_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_lpevents_show, NULL); -} - -static const struct file_operations proc_lpevents_operations = { - .open = proc_lpevents_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init proc_lpevents_init(void) -{ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; - - proc_create("iSeries/lpevents", S_IFREG|S_IRUGO, NULL, - &proc_lpevents_operations); - return 0; -} -__initcall(proc_lpevents_init); - diff --git a/arch/powerpc/platforms/iseries/main_store.h b/arch/powerpc/platforms/iseries/main_store.h deleted file mode 100644 index 1a7a3f50e40..00000000000 --- a/arch/powerpc/platforms/iseries/main_store.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ISERIES_MAIN_STORE_H -#define _ISERIES_MAIN_STORE_H - -/* Main Store Vpd for Condor,iStar,sStar */ -struct IoHriMainStoreSegment4 { - u8 msArea0Exists:1; - u8 msArea1Exists:1; - u8 msArea2Exists:1; - u8 msArea3Exists:1; - u8 reserved1:4; - u8 reserved2; - - u8 msArea0Functional:1; - u8 msArea1Functional:1; - u8 msArea2Functional:1; - u8 msArea3Functional:1; - u8 reserved3:4; - u8 reserved4; - - u32 totalMainStore; - - u64 msArea0Ptr; - u64 msArea1Ptr; - u64 msArea2Ptr; - u64 msArea3Ptr; - - u32 cardProductionLevel; - - u32 msAdrHole; - - u8 msArea0HasRiserVpd:1; - u8 msArea1HasRiserVpd:1; - u8 msArea2HasRiserVpd:1; - u8 msArea3HasRiserVpd:1; - u8 reserved5:4; - u8 reserved6; - u16 reserved7; - - u8 reserved8[28]; - - u64 nonInterleavedBlocksStartAdr; - u64 nonInterleavedBlocksEndAdr; -}; - -/* Main Store VPD for Power4 */ -struct __attribute((packed)) IoHriMainStoreChipInfo1 { - u32 chipMfgID; - char chipECLevel[4]; -}; - -struct IoHriMainStoreVpdIdData { - char typeNumber[4]; - char modelNumber[4]; - char partNumber[12]; - char serialNumber[12]; -}; - -struct __attribute((packed)) IoHriMainStoreVpdFruData { - char fruLabel[8]; - u8 numberOfSlots; - u8 pluggingType; - u16 slotMapIndex; -}; - -struct __attribute((packed)) IoHriMainStoreAdrRangeBlock { - void *blockStart; - void *blockEnd; - u32 blockProcChipId; -}; - -#define MaxAreaAdrRangeBlocks 4 - -struct __attribute((packed)) IoHriMainStoreArea4 { - u32 msVpdFormat; - u8 containedVpdType; - u8 reserved1; - u16 reserved2; - - u64 msExists; - u64 msFunctional; - - u32 memorySize; - u32 procNodeId; - - u32 numAdrRangeBlocks; - struct IoHriMainStoreAdrRangeBlock xAdrRangeBlock[MaxAreaAdrRangeBlocks]; - - struct IoHriMainStoreChipInfo1 chipInfo0; - struct IoHriMainStoreChipInfo1 chipInfo1; - struct IoHriMainStoreChipInfo1 chipInfo2; - struct IoHriMainStoreChipInfo1 chipInfo3; - struct IoHriMainStoreChipInfo1 chipInfo4; - struct IoHriMainStoreChipInfo1 chipInfo5; - struct IoHriMainStoreChipInfo1 chipInfo6; - struct IoHriMainStoreChipInfo1 chipInfo7; - - void *msRamAreaArray; - u32 msRamAreaArrayNumEntries; - u32 msRamAreaArrayEntrySize; - - u32 numaDimmExists; - u32 numaDimmFunctional; - void *numaDimmArray; - u32 numaDimmArrayNumEntries; - u32 numaDimmArrayEntrySize; - - struct IoHriMainStoreVpdIdData idData; - - u64 powerData; - u64 cardAssemblyPartNum; - u64 chipSerialNum; - - u64 reserved3; - char reserved4[16]; - - struct IoHriMainStoreVpdFruData fruData; - - u8 vpdPortNum; - u8 reserved5; - u8 frameId; - u8 rackUnit; - char asciiKeywordVpd[256]; - u32 reserved6; -}; - - -struct IoHriMainStoreSegment5 { - u16 reserved1; - u8 reserved2; - u8 msVpdFormat; - - u32 totalMainStore; - u64 maxConfiguredMsAdr; - - struct IoHriMainStoreArea4 *msAreaArray; - u32 msAreaArrayNumEntries; - u32 msAreaArrayEntrySize; - - u32 msAreaExists; - u32 msAreaFunctional; - - u64 reserved3; -}; - -extern u64 xMsVpd[]; - -#endif /* _ISERIES_MAIN_STORE_H */ diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c deleted file mode 100644 index 254c1fc3d8d..00000000000 --- a/arch/powerpc/platforms/iseries/mf.c +++ /dev/null @@ -1,1275 +0,0 @@ -/* - * Copyright (C) 2001 Troy D. Armstrong IBM Corporation - * Copyright (C) 2004-2005 Stephen Rothwell IBM Corporation - * - * This modules exists as an interface between a Linux secondary partition - * running on an iSeries and the primary partition's Virtual Service - * Processor (VSP) object. The VSP has final authority over powering on/off - * all partitions in the iSeries. It also provides miscellaneous low-level - * machine facility type operations. - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/errno.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/completion.h> -#include <linux/delay.h> -#include <linux/export.h> -#include <linux/proc_fs.h> -#include <linux/dma-mapping.h> -#include <linux/bcd.h> -#include <linux/rtc.h> -#include <linux/slab.h> - -#include <asm/time.h> -#include <asm/uaccess.h> -#include <asm/paca.h> -#include <asm/abs_addr.h> -#include <asm/firmware.h> -#include <asm/iseries/mf.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/it_lp_queue.h> - -#include "setup.h" - -static int mf_initialized; - -/* - * This is the structure layout for the Machine Facilities LPAR event - * flows. - */ -struct vsp_cmd_data { - u64 token; - u16 cmd; - HvLpIndex lp_index; - u8 result_code; - u32 reserved; - union { - u64 state; /* GetStateOut */ - u64 ipl_type; /* GetIplTypeOut, Function02SelectIplTypeIn */ - u64 ipl_mode; /* GetIplModeOut, Function02SelectIplModeIn */ - u64 page[4]; /* GetSrcHistoryIn */ - u64 flag; /* GetAutoIplWhenPrimaryIplsOut, - SetAutoIplWhenPrimaryIplsIn, - WhiteButtonPowerOffIn, - Function08FastPowerOffIn, - IsSpcnRackPowerIncompleteOut */ - struct { - u64 token; - u64 address_type; - u64 side; - u32 length; - u32 offset; - } kern; /* SetKernelImageIn, GetKernelImageIn, - SetKernelCmdLineIn, GetKernelCmdLineIn */ - u32 length_out; /* GetKernelImageOut, GetKernelCmdLineOut */ - u8 reserved[80]; - } sub_data; -}; - -struct vsp_rsp_data { - struct completion com; - struct vsp_cmd_data *response; -}; - -struct alloc_data { - u16 size; - u16 type; - u32 count; - u16 reserved1; - u8 reserved2; - HvLpIndex target_lp; -}; - -struct ce_msg_data; - -typedef void (*ce_msg_comp_hdlr)(void *token, struct ce_msg_data *vsp_cmd_rsp); - -struct ce_msg_comp_data { - ce_msg_comp_hdlr handler; - void *token; -}; - -struct ce_msg_data { - u8 ce_msg[12]; - char reserved[4]; - struct ce_msg_comp_data *completion; -}; - -struct io_mf_lp_event { - struct HvLpEvent hp_lp_event; - u16 subtype_result_code; - u16 reserved1; - u32 reserved2; - union { - struct alloc_data alloc; - struct ce_msg_data ce_msg; - struct vsp_cmd_data vsp_cmd; - } data; -}; - -#define subtype_data(a, b, c, d) \ - (((a) << 24) + ((b) << 16) + ((c) << 8) + (d)) - -/* - * All outgoing event traffic is kept on a FIFO queue. The first - * pointer points to the one that is outstanding, and all new - * requests get stuck on the end. Also, we keep a certain number of - * preallocated pending events so that we can operate very early in - * the boot up sequence (before kmalloc is ready). - */ -struct pending_event { - struct pending_event *next; - struct io_mf_lp_event event; - MFCompleteHandler hdlr; - char dma_data[72]; - unsigned dma_data_length; - unsigned remote_address; -}; -static spinlock_t pending_event_spinlock; -static struct pending_event *pending_event_head; -static struct pending_event *pending_event_tail; -static struct pending_event *pending_event_avail; -#define PENDING_EVENT_PREALLOC_LEN 16 -static struct pending_event pending_event_prealloc[PENDING_EVENT_PREALLOC_LEN]; - -/* - * Put a pending event onto the available queue, so it can get reused. - * Attention! You must have the pending_event_spinlock before calling! - */ -static void free_pending_event(struct pending_event *ev) -{ - if (ev != NULL) { - ev->next = pending_event_avail; - pending_event_avail = ev; - } -} - -/* - * Enqueue the outbound event onto the stack. If the queue was - * empty to begin with, we must also issue it via the Hypervisor - * interface. There is a section of code below that will touch - * the first stack pointer without the protection of the pending_event_spinlock. - * This is OK, because we know that nobody else will be modifying - * the first pointer when we do this. - */ -static int signal_event(struct pending_event *ev) -{ - int rc = 0; - unsigned long flags; - int go = 1; - struct pending_event *ev1; - HvLpEvent_Rc hv_rc; - - /* enqueue the event */ - if (ev != NULL) { - ev->next = NULL; - spin_lock_irqsave(&pending_event_spinlock, flags); - if (pending_event_head == NULL) - pending_event_head = ev; - else { - go = 0; - pending_event_tail->next = ev; - } - pending_event_tail = ev; - spin_unlock_irqrestore(&pending_event_spinlock, flags); - } - - /* send the event */ - while (go) { - go = 0; - - /* any DMA data to send beforehand? */ - if (pending_event_head->dma_data_length > 0) - HvCallEvent_dmaToSp(pending_event_head->dma_data, - pending_event_head->remote_address, - pending_event_head->dma_data_length, - HvLpDma_Direction_LocalToRemote); - - hv_rc = HvCallEvent_signalLpEvent( - &pending_event_head->event.hp_lp_event); - if (hv_rc != HvLpEvent_Rc_Good) { - printk(KERN_ERR "mf.c: HvCallEvent_signalLpEvent() " - "failed with %d\n", (int)hv_rc); - - spin_lock_irqsave(&pending_event_spinlock, flags); - ev1 = pending_event_head; - pending_event_head = pending_event_head->next; - if (pending_event_head != NULL) - go = 1; - spin_unlock_irqrestore(&pending_event_spinlock, flags); - - if (ev1 == ev) - rc = -EIO; - else if (ev1->hdlr != NULL) - (*ev1->hdlr)((void *)ev1->event.hp_lp_event.xCorrelationToken, -EIO); - - spin_lock_irqsave(&pending_event_spinlock, flags); - free_pending_event(ev1); - spin_unlock_irqrestore(&pending_event_spinlock, flags); - } - } - - return rc; -} - -/* - * Allocate a new pending_event structure, and initialize it. - */ -static struct pending_event *new_pending_event(void) -{ - struct pending_event *ev = NULL; - HvLpIndex primary_lp = HvLpConfig_getPrimaryLpIndex(); - unsigned long flags; - struct HvLpEvent *hev; - - spin_lock_irqsave(&pending_event_spinlock, flags); - if (pending_event_avail != NULL) { - ev = pending_event_avail; - pending_event_avail = pending_event_avail->next; - } - spin_unlock_irqrestore(&pending_event_spinlock, flags); - if (ev == NULL) { - ev = kmalloc(sizeof(struct pending_event), GFP_ATOMIC); - if (ev == NULL) { - printk(KERN_ERR "mf.c: unable to kmalloc %ld bytes\n", - sizeof(struct pending_event)); - return NULL; - } - } - memset(ev, 0, sizeof(struct pending_event)); - hev = &ev->event.hp_lp_event; - hev->flags = HV_LP_EVENT_VALID | HV_LP_EVENT_DO_ACK | HV_LP_EVENT_INT; - hev->xType = HvLpEvent_Type_MachineFac; - hev->xSourceLp = HvLpConfig_getLpIndex(); - hev->xTargetLp = primary_lp; - hev->xSizeMinus1 = sizeof(ev->event) - 1; - hev->xRc = HvLpEvent_Rc_Good; - hev->xSourceInstanceId = HvCallEvent_getSourceLpInstanceId(primary_lp, - HvLpEvent_Type_MachineFac); - hev->xTargetInstanceId = HvCallEvent_getTargetLpInstanceId(primary_lp, - HvLpEvent_Type_MachineFac); - - return ev; -} - -static int __maybe_unused -signal_vsp_instruction(struct vsp_cmd_data *vsp_cmd) -{ - struct pending_event *ev = new_pending_event(); - int rc; - struct vsp_rsp_data response; - - if (ev == NULL) - return -ENOMEM; - - init_completion(&response.com); - response.response = vsp_cmd; - ev->event.hp_lp_event.xSubtype = 6; - ev->event.hp_lp_event.x.xSubtypeData = - subtype_data('M', 'F', 'V', 'I'); - ev->event.data.vsp_cmd.token = (u64)&response; - ev->event.data.vsp_cmd.cmd = vsp_cmd->cmd; - ev->event.data.vsp_cmd.lp_index = HvLpConfig_getLpIndex(); - ev->event.data.vsp_cmd.result_code = 0xFF; - ev->event.data.vsp_cmd.reserved = 0; - memcpy(&(ev->event.data.vsp_cmd.sub_data), - &(vsp_cmd->sub_data), sizeof(vsp_cmd->sub_data)); - mb(); - - rc = signal_event(ev); - if (rc == 0) - wait_for_completion(&response.com); - return rc; -} - - -/* - * Send a 12-byte CE message to the primary partition VSP object - */ -static int signal_ce_msg(char *ce_msg, struct ce_msg_comp_data *completion) -{ - struct pending_event *ev = new_pending_event(); - - if (ev == NULL) - return -ENOMEM; - - ev->event.hp_lp_event.xSubtype = 0; - ev->event.hp_lp_event.x.xSubtypeData = - subtype_data('M', 'F', 'C', 'E'); - memcpy(ev->event.data.ce_msg.ce_msg, ce_msg, 12); - ev->event.data.ce_msg.completion = completion; - return signal_event(ev); -} - -/* - * Send a 12-byte CE message (with no data) to the primary partition VSP object - */ -static int signal_ce_msg_simple(u8 ce_op, struct ce_msg_comp_data *completion) -{ - u8 ce_msg[12]; - - memset(ce_msg, 0, sizeof(ce_msg)); - ce_msg[3] = ce_op; - return signal_ce_msg(ce_msg, completion); -} - -/* - * Send a 12-byte CE message and DMA data to the primary partition VSP object - */ -static int dma_and_signal_ce_msg(char *ce_msg, - struct ce_msg_comp_data *completion, void *dma_data, - unsigned dma_data_length, unsigned remote_address) -{ - struct pending_event *ev = new_pending_event(); - - if (ev == NULL) - return -ENOMEM; - - ev->event.hp_lp_event.xSubtype = 0; - ev->event.hp_lp_event.x.xSubtypeData = - subtype_data('M', 'F', 'C', 'E'); - memcpy(ev->event.data.ce_msg.ce_msg, ce_msg, 12); - ev->event.data.ce_msg.completion = completion; - memcpy(ev->dma_data, dma_data, dma_data_length); - ev->dma_data_length = dma_data_length; - ev->remote_address = remote_address; - return signal_event(ev); -} - -/* - * Initiate a nice (hopefully) shutdown of Linux. We simply are - * going to try and send the init process a SIGINT signal. If - * this fails (why?), we'll simply force it off in a not-so-nice - * manner. - */ -static int shutdown(void) -{ - int rc = kill_cad_pid(SIGINT, 1); - - if (rc) { - printk(KERN_ALERT "mf.c: SIGINT to init failed (%d), " - "hard shutdown commencing\n", rc); - mf_power_off(); - } else - printk(KERN_INFO "mf.c: init has been successfully notified " - "to proceed with shutdown\n"); - return rc; -} - -/* - * The primary partition VSP object is sending us a new - * event flow. Handle it... - */ -static void handle_int(struct io_mf_lp_event *event) -{ - struct ce_msg_data *ce_msg_data; - struct ce_msg_data *pce_msg_data; - unsigned long flags; - struct pending_event *pev; - - /* ack the interrupt */ - event->hp_lp_event.xRc = HvLpEvent_Rc_Good; - HvCallEvent_ackLpEvent(&event->hp_lp_event); - - /* process interrupt */ - switch (event->hp_lp_event.xSubtype) { - case 0: /* CE message */ - ce_msg_data = &event->data.ce_msg; - switch (ce_msg_data->ce_msg[3]) { - case 0x5B: /* power control notification */ - if ((ce_msg_data->ce_msg[5] & 0x20) != 0) { - printk(KERN_INFO "mf.c: Commencing partition shutdown\n"); - if (shutdown() == 0) - signal_ce_msg_simple(0xDB, NULL); - } - break; - case 0xC0: /* get time */ - spin_lock_irqsave(&pending_event_spinlock, flags); - pev = pending_event_head; - if (pev != NULL) - pending_event_head = pending_event_head->next; - spin_unlock_irqrestore(&pending_event_spinlock, flags); - if (pev == NULL) - break; - pce_msg_data = &pev->event.data.ce_msg; - if (pce_msg_data->ce_msg[3] != 0x40) - break; - if (pce_msg_data->completion != NULL) { - ce_msg_comp_hdlr handler = - pce_msg_data->completion->handler; - void *token = pce_msg_data->completion->token; - - if (handler != NULL) - (*handler)(token, ce_msg_data); - } - spin_lock_irqsave(&pending_event_spinlock, flags); - free_pending_event(pev); - spin_unlock_irqrestore(&pending_event_spinlock, flags); - /* send next waiting event */ - if (pending_event_head != NULL) - signal_event(NULL); - break; - } - break; - case 1: /* IT sys shutdown */ - printk(KERN_INFO "mf.c: Commencing system shutdown\n"); - shutdown(); - break; - } -} - -/* - * The primary partition VSP object is acknowledging the receipt - * of a flow we sent to them. If there are other flows queued - * up, we must send another one now... - */ -static void handle_ack(struct io_mf_lp_event *event) -{ - unsigned long flags; - struct pending_event *two = NULL; - unsigned long free_it = 0; - struct ce_msg_data *ce_msg_data; - struct ce_msg_data *pce_msg_data; - struct vsp_rsp_data *rsp; - - /* handle current event */ - if (pending_event_head == NULL) { - printk(KERN_ERR "mf.c: stack empty for receiving ack\n"); - return; - } - - switch (event->hp_lp_event.xSubtype) { - case 0: /* CE msg */ - ce_msg_data = &event->data.ce_msg; - if (ce_msg_data->ce_msg[3] != 0x40) { - free_it = 1; - break; - } - if (ce_msg_data->ce_msg[2] == 0) - break; - free_it = 1; - pce_msg_data = &pending_event_head->event.data.ce_msg; - if (pce_msg_data->completion != NULL) { - ce_msg_comp_hdlr handler = - pce_msg_data->completion->handler; - void *token = pce_msg_data->completion->token; - - if (handler != NULL) - (*handler)(token, ce_msg_data); - } - break; - case 4: /* allocate */ - case 5: /* deallocate */ - if (pending_event_head->hdlr != NULL) - (*pending_event_head->hdlr)((void *)event->hp_lp_event.xCorrelationToken, event->data.alloc.count); - free_it = 1; - break; - case 6: - free_it = 1; - rsp = (struct vsp_rsp_data *)event->data.vsp_cmd.token; - if (rsp == NULL) { - printk(KERN_ERR "mf.c: no rsp\n"); - break; - } - if (rsp->response != NULL) - memcpy(rsp->response, &event->data.vsp_cmd, - sizeof(event->data.vsp_cmd)); - complete(&rsp->com); - break; - } - - /* remove from queue */ - spin_lock_irqsave(&pending_event_spinlock, flags); - if ((pending_event_head != NULL) && (free_it == 1)) { - struct pending_event *oldHead = pending_event_head; - - pending_event_head = pending_event_head->next; - two = pending_event_head; - free_pending_event(oldHead); - } - spin_unlock_irqrestore(&pending_event_spinlock, flags); - - /* send next waiting event */ - if (two != NULL) - signal_event(NULL); -} - -/* - * This is the generic event handler we are registering with - * the Hypervisor. Ensure the flows are for us, and then - * parse it enough to know if it is an interrupt or an - * acknowledge. - */ -static void hv_handler(struct HvLpEvent *event) -{ - if ((event != NULL) && (event->xType == HvLpEvent_Type_MachineFac)) { - if (hvlpevent_is_ack(event)) - handle_ack((struct io_mf_lp_event *)event); - else - handle_int((struct io_mf_lp_event *)event); - } else - printk(KERN_ERR "mf.c: alien event received\n"); -} - -/* - * Global kernel interface to allocate and seed events into the - * Hypervisor. - */ -void mf_allocate_lp_events(HvLpIndex target_lp, HvLpEvent_Type type, - unsigned size, unsigned count, MFCompleteHandler hdlr, - void *user_token) -{ - struct pending_event *ev = new_pending_event(); - int rc; - - if (ev == NULL) { - rc = -ENOMEM; - } else { - ev->event.hp_lp_event.xSubtype = 4; - ev->event.hp_lp_event.xCorrelationToken = (u64)user_token; - ev->event.hp_lp_event.x.xSubtypeData = - subtype_data('M', 'F', 'M', 'A'); - ev->event.data.alloc.target_lp = target_lp; - ev->event.data.alloc.type = type; - ev->event.data.alloc.size = size; - ev->event.data.alloc.count = count; - ev->hdlr = hdlr; - rc = signal_event(ev); - } - if ((rc != 0) && (hdlr != NULL)) - (*hdlr)(user_token, rc); -} -EXPORT_SYMBOL(mf_allocate_lp_events); - -/* - * Global kernel interface to unseed and deallocate events already in - * Hypervisor. - */ -void mf_deallocate_lp_events(HvLpIndex target_lp, HvLpEvent_Type type, - unsigned count, MFCompleteHandler hdlr, void *user_token) -{ - struct pending_event *ev = new_pending_event(); - int rc; - - if (ev == NULL) - rc = -ENOMEM; - else { - ev->event.hp_lp_event.xSubtype = 5; - ev->event.hp_lp_event.xCorrelationToken = (u64)user_token; - ev->event.hp_lp_event.x.xSubtypeData = - subtype_data('M', 'F', 'M', 'D'); - ev->event.data.alloc.target_lp = target_lp; - ev->event.data.alloc.type = type; - ev->event.data.alloc.count = count; - ev->hdlr = hdlr; - rc = signal_event(ev); - } - if ((rc != 0) && (hdlr != NULL)) - (*hdlr)(user_token, rc); -} -EXPORT_SYMBOL(mf_deallocate_lp_events); - -/* - * Global kernel interface to tell the VSP object in the primary - * partition to power this partition off. - */ -void mf_power_off(void) -{ - printk(KERN_INFO "mf.c: Down it goes...\n"); - signal_ce_msg_simple(0x4d, NULL); - for (;;) - ; -} - -/* - * Global kernel interface to tell the VSP object in the primary - * partition to reboot this partition. - */ -void mf_reboot(char *cmd) -{ - printk(KERN_INFO "mf.c: Preparing to bounce...\n"); - signal_ce_msg_simple(0x4e, NULL); - for (;;) - ; -} - -/* - * Display a single word SRC onto the VSP control panel. - */ -void mf_display_src(u32 word) -{ - u8 ce[12]; - - memset(ce, 0, sizeof(ce)); - ce[3] = 0x4a; - ce[7] = 0x01; - ce[8] = word >> 24; - ce[9] = word >> 16; - ce[10] = word >> 8; - ce[11] = word; - signal_ce_msg(ce, NULL); -} - -/* - * Display a single word SRC of the form "PROGXXXX" on the VSP control panel. - */ -static __init void mf_display_progress_src(u16 value) -{ - u8 ce[12]; - u8 src[72]; - - memcpy(ce, "\x00\x00\x04\x4A\x00\x00\x00\x48\x00\x00\x00\x00", 12); - memcpy(src, "\x01\x00\x00\x01\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00" - "\x00\x00\x00\x00PROGxxxx ", - 72); - src[6] = value >> 8; - src[7] = value & 255; - src[44] = "0123456789ABCDEF"[(value >> 12) & 15]; - src[45] = "0123456789ABCDEF"[(value >> 8) & 15]; - src[46] = "0123456789ABCDEF"[(value >> 4) & 15]; - src[47] = "0123456789ABCDEF"[value & 15]; - dma_and_signal_ce_msg(ce, NULL, src, sizeof(src), 9 * 64 * 1024); -} - -/* - * Clear the VSP control panel. Used to "erase" an SRC that was - * previously displayed. - */ -static void mf_clear_src(void) -{ - signal_ce_msg_simple(0x4b, NULL); -} - -void __init mf_display_progress(u16 value) -{ - if (!mf_initialized) - return; - - if (0xFFFF == value) - mf_clear_src(); - else - mf_display_progress_src(value); -} - -/* - * Initialization code here. - */ -void __init mf_init(void) -{ - int i; - - spin_lock_init(&pending_event_spinlock); - - for (i = 0; i < PENDING_EVENT_PREALLOC_LEN; i++) - free_pending_event(&pending_event_prealloc[i]); - - HvLpEvent_registerHandler(HvLpEvent_Type_MachineFac, &hv_handler); - - /* virtual continue ack */ - signal_ce_msg_simple(0x57, NULL); - - mf_initialized = 1; - mb(); - - printk(KERN_NOTICE "mf.c: iSeries Linux LPAR Machine Facilities " - "initialized\n"); -} - -struct rtc_time_data { - struct completion com; - struct ce_msg_data ce_msg; - int rc; -}; - -static void get_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) -{ - struct rtc_time_data *rtc = token; - - memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); - rtc->rc = 0; - complete(&rtc->com); -} - -static int mf_set_rtc(struct rtc_time *tm) -{ - char ce_time[12]; - u8 day, mon, hour, min, sec, y1, y2; - unsigned year; - - year = 1900 + tm->tm_year; - y1 = year / 100; - y2 = year % 100; - - sec = tm->tm_sec; - min = tm->tm_min; - hour = tm->tm_hour; - day = tm->tm_mday; - mon = tm->tm_mon + 1; - - sec = bin2bcd(sec); - min = bin2bcd(min); - hour = bin2bcd(hour); - mon = bin2bcd(mon); - day = bin2bcd(day); - y1 = bin2bcd(y1); - y2 = bin2bcd(y2); - - memset(ce_time, 0, sizeof(ce_time)); - ce_time[3] = 0x41; - ce_time[4] = y1; - ce_time[5] = y2; - ce_time[6] = sec; - ce_time[7] = min; - ce_time[8] = hour; - ce_time[10] = day; - ce_time[11] = mon; - - return signal_ce_msg(ce_time, NULL); -} - -static int rtc_set_tm(int rc, u8 *ce_msg, struct rtc_time *tm) -{ - tm->tm_wday = 0; - tm->tm_yday = 0; - tm->tm_isdst = 0; - if (rc) { - tm->tm_sec = 0; - tm->tm_min = 0; - tm->tm_hour = 0; - tm->tm_mday = 15; - tm->tm_mon = 5; - tm->tm_year = 52; - return rc; - } - - if ((ce_msg[2] == 0xa9) || - (ce_msg[2] == 0xaf)) { - /* TOD clock is not set */ - tm->tm_sec = 1; - tm->tm_min = 1; - tm->tm_hour = 1; - tm->tm_mday = 10; - tm->tm_mon = 8; - tm->tm_year = 71; - mf_set_rtc(tm); - } - { - u8 year = ce_msg[5]; - u8 sec = ce_msg[6]; - u8 min = ce_msg[7]; - u8 hour = ce_msg[8]; - u8 day = ce_msg[10]; - u8 mon = ce_msg[11]; - - sec = bcd2bin(sec); - min = bcd2bin(min); - hour = bcd2bin(hour); - day = bcd2bin(day); - mon = bcd2bin(mon); - year = bcd2bin(year); - - if (year <= 69) - year += 100; - - tm->tm_sec = sec; - tm->tm_min = min; - tm->tm_hour = hour; - tm->tm_mday = day; - tm->tm_mon = mon; - tm->tm_year = year; - } - - return 0; -} - -static int mf_get_rtc(struct rtc_time *tm) -{ - struct ce_msg_comp_data ce_complete; - struct rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - init_completion(&rtc_data.com); - ce_complete.handler = &get_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - wait_for_completion(&rtc_data.com); - return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); -} - -struct boot_rtc_time_data { - int busy; - struct ce_msg_data ce_msg; - int rc; -}; - -static void get_boot_rtc_time_complete(void *token, struct ce_msg_data *ce_msg) -{ - struct boot_rtc_time_data *rtc = token; - - memcpy(&rtc->ce_msg, ce_msg, sizeof(rtc->ce_msg)); - rtc->rc = 0; - rtc->busy = 0; -} - -static int mf_get_boot_rtc(struct rtc_time *tm) -{ - struct ce_msg_comp_data ce_complete; - struct boot_rtc_time_data rtc_data; - int rc; - - memset(&ce_complete, 0, sizeof(ce_complete)); - memset(&rtc_data, 0, sizeof(rtc_data)); - rtc_data.busy = 1; - ce_complete.handler = &get_boot_rtc_time_complete; - ce_complete.token = &rtc_data; - rc = signal_ce_msg_simple(0x40, &ce_complete); - if (rc) - return rc; - /* We need to poll here as we are not yet taking interrupts */ - while (rtc_data.busy) { - if (hvlpevent_is_pending()) - process_hvlpevents(); - } - return rtc_set_tm(rtc_data.rc, rtc_data.ce_msg.ce_msg, tm); -} - -#ifdef CONFIG_PROC_FS -static int mf_cmdline_proc_show(struct seq_file *m, void *v) -{ - char *page, *p; - struct vsp_cmd_data vsp_cmd; - int rc; - dma_addr_t dma_addr; - - /* The HV appears to return no more than 256 bytes of command line */ - page = kmalloc(256, GFP_KERNEL); - if (!page) - return -ENOMEM; - - dma_addr = iseries_hv_map(page, 256, DMA_FROM_DEVICE); - if (dma_addr == DMA_ERROR_CODE) { - kfree(page); - return -ENOMEM; - } - memset(page, 0, 256); - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.cmd = 33; - vsp_cmd.sub_data.kern.token = dma_addr; - vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = (u64)m->private; - vsp_cmd.sub_data.kern.length = 256; - mb(); - rc = signal_vsp_instruction(&vsp_cmd); - iseries_hv_unmap(dma_addr, 256, DMA_FROM_DEVICE); - if (rc) { - kfree(page); - return rc; - } - if (vsp_cmd.result_code != 0) { - kfree(page); - return -ENOMEM; - } - p = page; - while (p - page < 256) { - if (*p == '\0' || *p == '\n') { - *p = '\n'; - break; - } - p++; - - } - seq_write(m, page, p - page); - kfree(page); - return 0; -} - -static int mf_cmdline_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mf_cmdline_proc_show, PDE(inode)->data); -} - -#if 0 -static int mf_getVmlinuxChunk(char *buffer, int *size, int offset, u64 side) -{ - struct vsp_cmd_data vsp_cmd; - int rc; - int len = *size; - dma_addr_t dma_addr; - - dma_addr = iseries_hv_map(buffer, len, DMA_FROM_DEVICE); - memset(buffer, 0, len); - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.cmd = 32; - vsp_cmd.sub_data.kern.token = dma_addr; - vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = side; - vsp_cmd.sub_data.kern.offset = offset; - vsp_cmd.sub_data.kern.length = len; - mb(); - rc = signal_vsp_instruction(&vsp_cmd); - if (rc == 0) { - if (vsp_cmd.result_code == 0) - *size = vsp_cmd.sub_data.length_out; - else - rc = -ENOMEM; - } - - iseries_hv_unmap(dma_addr, len, DMA_FROM_DEVICE); - - return rc; -} - -static int proc_mf_dump_vmlinux(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int sizeToGet = count; - - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - - if (mf_getVmlinuxChunk(page, &sizeToGet, off, (u64)data) == 0) { - if (sizeToGet != 0) { - *start = page + off; - return sizeToGet; - } - *eof = 1; - return 0; - } - *eof = 1; - return 0; -} -#endif - -static int mf_side_proc_show(struct seq_file *m, void *v) -{ - char mf_current_side = ' '; - struct vsp_cmd_data vsp_cmd; - - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.cmd = 2; - vsp_cmd.sub_data.ipl_type = 0; - mb(); - - if (signal_vsp_instruction(&vsp_cmd) == 0) { - if (vsp_cmd.result_code == 0) { - switch (vsp_cmd.sub_data.ipl_type) { - case 0: mf_current_side = 'A'; - break; - case 1: mf_current_side = 'B'; - break; - case 2: mf_current_side = 'C'; - break; - default: mf_current_side = 'D'; - break; - } - } - } - - seq_printf(m, "%c\n", mf_current_side); - return 0; -} - -static int mf_side_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mf_side_proc_show, NULL); -} - -static ssize_t mf_side_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - char side; - u64 newSide; - struct vsp_cmd_data vsp_cmd; - - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - - if (count == 0) - return 0; - - if (get_user(side, buffer)) - return -EFAULT; - - switch (side) { - case 'A': newSide = 0; - break; - case 'B': newSide = 1; - break; - case 'C': newSide = 2; - break; - case 'D': newSide = 3; - break; - default: - printk(KERN_ERR "mf_proc.c: proc_mf_change_side: invalid side\n"); - return -EINVAL; - } - - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.sub_data.ipl_type = newSide; - vsp_cmd.cmd = 10; - - (void)signal_vsp_instruction(&vsp_cmd); - - return count; -} - -static const struct file_operations mf_side_proc_fops = { - .owner = THIS_MODULE, - .open = mf_side_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = mf_side_proc_write, -}; - -static int mf_src_proc_show(struct seq_file *m, void *v) -{ - return 0; -} - -static int mf_src_proc_open(struct inode *inode, struct file *file) -{ - return single_open(file, mf_src_proc_show, NULL); -} - -static ssize_t mf_src_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - char stkbuf[10]; - - if (!capable(CAP_SYS_ADMIN)) - return -EACCES; - - if ((count < 4) && (count != 1)) { - printk(KERN_ERR "mf_proc: invalid src\n"); - return -EINVAL; - } - - if (count > (sizeof(stkbuf) - 1)) - count = sizeof(stkbuf) - 1; - if (copy_from_user(stkbuf, buffer, count)) - return -EFAULT; - - if ((count == 1) && (*stkbuf == '\0')) - mf_clear_src(); - else - mf_display_src(*(u32 *)stkbuf); - - return count; -} - -static const struct file_operations mf_src_proc_fops = { - .owner = THIS_MODULE, - .open = mf_src_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = mf_src_proc_write, -}; - -static ssize_t mf_cmdline_proc_write(struct file *file, const char __user *buffer, - size_t count, loff_t *pos) -{ - void *data = PDE(file->f_path.dentry->d_inode)->data; - struct vsp_cmd_data vsp_cmd; - dma_addr_t dma_addr; - char *page; - int ret = -EACCES; - - if (!capable(CAP_SYS_ADMIN)) - goto out; - - dma_addr = 0; - page = iseries_hv_alloc(count, &dma_addr, GFP_ATOMIC); - ret = -ENOMEM; - if (page == NULL) - goto out; - - ret = -EFAULT; - if (copy_from_user(page, buffer, count)) - goto out_free; - - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.cmd = 31; - vsp_cmd.sub_data.kern.token = dma_addr; - vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = (u64)data; - vsp_cmd.sub_data.kern.length = count; - mb(); - (void)signal_vsp_instruction(&vsp_cmd); - ret = count; - -out_free: - iseries_hv_free(count, page, dma_addr); -out: - return ret; -} - -static const struct file_operations mf_cmdline_proc_fops = { - .owner = THIS_MODULE, - .open = mf_cmdline_proc_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .write = mf_cmdline_proc_write, -}; - -static ssize_t proc_mf_change_vmlinux(struct file *file, - const char __user *buf, - size_t count, loff_t *ppos) -{ - struct proc_dir_entry *dp = PDE(file->f_path.dentry->d_inode); - ssize_t rc; - dma_addr_t dma_addr; - char *page; - struct vsp_cmd_data vsp_cmd; - - rc = -EACCES; - if (!capable(CAP_SYS_ADMIN)) - goto out; - - dma_addr = 0; - page = iseries_hv_alloc(count, &dma_addr, GFP_ATOMIC); - rc = -ENOMEM; - if (page == NULL) { - printk(KERN_ERR "mf.c: couldn't allocate memory to set vmlinux chunk\n"); - goto out; - } - rc = -EFAULT; - if (copy_from_user(page, buf, count)) - goto out_free; - - memset(&vsp_cmd, 0, sizeof(vsp_cmd)); - vsp_cmd.cmd = 30; - vsp_cmd.sub_data.kern.token = dma_addr; - vsp_cmd.sub_data.kern.address_type = HvLpDma_AddressType_TceIndex; - vsp_cmd.sub_data.kern.side = (u64)dp->data; - vsp_cmd.sub_data.kern.offset = *ppos; - vsp_cmd.sub_data.kern.length = count; - mb(); - rc = signal_vsp_instruction(&vsp_cmd); - if (rc) - goto out_free; - rc = -ENOMEM; - if (vsp_cmd.result_code != 0) - goto out_free; - - *ppos += count; - rc = count; -out_free: - iseries_hv_free(count, page, dma_addr); -out: - return rc; -} - -static const struct file_operations proc_vmlinux_operations = { - .write = proc_mf_change_vmlinux, - .llseek = default_llseek, -}; - -static int __init mf_proc_init(void) -{ - struct proc_dir_entry *mf_proc_root; - struct proc_dir_entry *ent; - struct proc_dir_entry *mf; - char name[2]; - int i; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; - - mf_proc_root = proc_mkdir("iSeries/mf", NULL); - if (!mf_proc_root) - return 1; - - name[1] = '\0'; - for (i = 0; i < 4; i++) { - name[0] = 'A' + i; - mf = proc_mkdir(name, mf_proc_root); - if (!mf) - return 1; - - ent = proc_create_data("cmdline", S_IRUSR|S_IWUSR, mf, - &mf_cmdline_proc_fops, (void *)(long)i); - if (!ent) - return 1; - - if (i == 3) /* no vmlinux entry for 'D' */ - continue; - - ent = proc_create_data("vmlinux", S_IFREG|S_IWUSR, mf, - &proc_vmlinux_operations, - (void *)(long)i); - if (!ent) - return 1; - } - - ent = proc_create("side", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, - &mf_side_proc_fops); - if (!ent) - return 1; - - ent = proc_create("src", S_IFREG|S_IRUSR|S_IWUSR, mf_proc_root, - &mf_src_proc_fops); - if (!ent) - return 1; - - return 0; -} - -__initcall(mf_proc_init); - -#endif /* CONFIG_PROC_FS */ - -/* - * Get the RTC from the virtual service processor - * This requires flowing LpEvents to the primary partition - */ -void iSeries_get_rtc_time(struct rtc_time *rtc_tm) -{ - mf_get_rtc(rtc_tm); - rtc_tm->tm_mon--; -} - -/* - * Set the RTC in the virtual service processor - * This requires flowing LpEvents to the primary partition - */ -int iSeries_set_rtc_time(struct rtc_time *tm) -{ - mf_set_rtc(tm); - return 0; -} - -unsigned long iSeries_get_boot_time(void) -{ - struct rtc_time tm; - - mf_get_boot_rtc(&tm); - return mktime(tm.tm_year + 1900, tm.tm_mon, tm.tm_mday, - tm.tm_hour, tm.tm_min, tm.tm_sec); -} diff --git a/arch/powerpc/platforms/iseries/misc.S b/arch/powerpc/platforms/iseries/misc.S deleted file mode 100644 index 2c6ff0fdac9..00000000000 --- a/arch/powerpc/platforms/iseries/misc.S +++ /dev/null @@ -1,26 +0,0 @@ -/* - * This file contains miscellaneous low-level functions. - * Copyright (C) 1995-2005 IBM Corp - * - * Largely rewritten by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras. - * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com) - * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/processor.h> -#include <asm/asm-offsets.h> -#include <asm/ppc_asm.h> - - .text - -/* Handle pending interrupts in interrupt context */ -_GLOBAL(iseries_handle_interrupts) - li r0,0x5555 - sc - blr diff --git a/arch/powerpc/platforms/iseries/naca.h b/arch/powerpc/platforms/iseries/naca.h deleted file mode 100644 index f01708e1286..00000000000 --- a/arch/powerpc/platforms/iseries/naca.h +++ /dev/null @@ -1,24 +0,0 @@ -#ifndef _PLATFORMS_ISERIES_NACA_H -#define _PLATFORMS_ISERIES_NACA_H - -/* - * c 2001 PPC 64 Team, IBM Corp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <asm/types.h> - -struct naca_struct { - /* Kernel only data - undefined for user space */ - const void *xItVpdAreas; /* VPD Data 0x00 */ - void *xRamDisk; /* iSeries ramdisk 0x08 */ - u64 xRamDiskSize; /* In pages 0x10 */ -}; - -extern struct naca_struct naca; - -#endif /* _PLATFORMS_ISERIES_NACA_H */ diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c deleted file mode 100644 index c7541288462..00000000000 --- a/arch/powerpc/platforms/iseries/pci.c +++ /dev/null @@ -1,919 +0,0 @@ -/* - * Copyright (C) 2001 Allan Trautman, IBM Corporation - * Copyright (C) 2005,2007 Stephen Rothwell, IBM Corp - * - * iSeries specific routines for PCI. - * - * Based on code from pci.c and iSeries_pci.c 32bit - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#undef DEBUG - -#include <linux/jiffies.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/string.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/of.h> -#include <linux/ratelimit.h> - -#include <asm/types.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/prom.h> -#include <asm/machdep.h> -#include <asm/pci-bridge.h> -#include <asm/iommu.h> -#include <asm/abs_addr.h> -#include <asm/firmware.h> - -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/iseries/mf.h> -#include <asm/iseries/iommu.h> - -#include <asm/ppc-pci.h> - -#include "irq.h" -#include "pci.h" -#include "call_pci.h" - -#define PCI_RETRY_MAX 3 -static int limit_pci_retries = 1; /* Set Retry Error on. */ - -/* - * Table defines - * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space. - */ -#define IOMM_TABLE_MAX_ENTRIES 1024 -#define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL -#define BASE_IO_MEMORY 0xE000000000000000UL -#define END_IO_MEMORY 0xEFFFFFFFFFFFFFFFUL - -static unsigned long max_io_memory = BASE_IO_MEMORY; -static long current_iomm_table_entry; - -/* - * Lookup Tables. - */ -static struct device_node *iomm_table[IOMM_TABLE_MAX_ENTRIES]; -static u64 ds_addr_table[IOMM_TABLE_MAX_ENTRIES]; - -static DEFINE_SPINLOCK(iomm_table_lock); - -/* - * Generate a Direct Select Address for the Hypervisor - */ -static inline u64 iseries_ds_addr(struct device_node *node) -{ - struct pci_dn *pdn = PCI_DN(node); - const u32 *sbp = of_get_property(node, "linux,subbus", NULL); - - return ((u64)pdn->busno << 48) + ((u64)(sbp ? *sbp : 0) << 40) - + ((u64)0x10 << 32); -} - -/* - * Size of Bus VPD data - */ -#define BUS_VPDSIZE 1024 - -/* - * Bus Vpd Tags - */ -#define VPD_END_OF_AREA 0x79 -#define VPD_ID_STRING 0x82 -#define VPD_VENDOR_AREA 0x84 - -/* - * Mfg Area Tags - */ -#define VPD_FRU_FRAME_ID 0x4649 /* "FI" */ -#define VPD_SLOT_MAP_FORMAT 0x4D46 /* "MF" */ -#define VPD_SLOT_MAP 0x534D /* "SM" */ - -/* - * Structures of the areas - */ -struct mfg_vpd_area { - u16 tag; - u8 length; - u8 data1; - u8 data2; -}; -#define MFG_ENTRY_SIZE 3 - -struct slot_map { - u8 agent; - u8 secondary_agent; - u8 phb; - char card_location[3]; - char parms[8]; - char reserved[2]; -}; -#define SLOT_ENTRY_SIZE 16 - -/* - * Parse the Slot Area - */ -static void __init iseries_parse_slot_area(struct slot_map *map, int len, - HvAgentId agent, u8 *phb, char card[4]) -{ - /* - * Parse Slot label until we find the one requested - */ - while (len > 0) { - if (map->agent == agent) { - /* - * If Phb wasn't found, grab the entry first one found. - */ - if (*phb == 0xff) - *phb = map->phb; - /* Found it, extract the data. */ - if (map->phb == *phb) { - memcpy(card, &map->card_location, 3); - card[3] = 0; - break; - } - } - /* Point to the next Slot */ - map = (struct slot_map *)((char *)map + SLOT_ENTRY_SIZE); - len -= SLOT_ENTRY_SIZE; - } -} - -/* - * Parse the Mfg Area - */ -static void __init iseries_parse_mfg_area(struct mfg_vpd_area *area, int len, - HvAgentId agent, u8 *phb, u8 *frame, char card[4]) -{ - u16 slot_map_fmt = 0; - - /* Parse Mfg Data */ - while (len > 0) { - int mfg_tag_len = area->length; - /* Frame ID (FI 4649020310 ) */ - if (area->tag == VPD_FRU_FRAME_ID) - *frame = area->data1; - /* Slot Map Format (MF 4D46020004 ) */ - else if (area->tag == VPD_SLOT_MAP_FORMAT) - slot_map_fmt = (area->data1 * 256) - + area->data2; - /* Slot Map (SM 534D90 */ - else if (area->tag == VPD_SLOT_MAP) { - struct slot_map *slot_map; - - if (slot_map_fmt == 0x1004) - slot_map = (struct slot_map *)((char *)area - + MFG_ENTRY_SIZE + 1); - else - slot_map = (struct slot_map *)((char *)area - + MFG_ENTRY_SIZE); - iseries_parse_slot_area(slot_map, mfg_tag_len, - agent, phb, card); - } - /* - * Point to the next Mfg Area - * Use defined size, sizeof give wrong answer - */ - area = (struct mfg_vpd_area *)((char *)area + mfg_tag_len - + MFG_ENTRY_SIZE); - len -= (mfg_tag_len + MFG_ENTRY_SIZE); - } -} - -/* - * Look for "BUS".. Data is not Null terminated. - * PHBID of 0xFF indicates PHB was not found in VPD Data. - */ -static u8 __init iseries_parse_phbid(u8 *area, int len) -{ - while (len > 0) { - if ((*area == 'B') && (*(area + 1) == 'U') - && (*(area + 2) == 'S')) { - area += 3; - while (*area == ' ') - area++; - return *area & 0x0F; - } - area++; - len--; - } - return 0xff; -} - -/* - * Parse out the VPD Areas - */ -static void __init iseries_parse_vpd(u8 *data, int data_len, - HvAgentId agent, u8 *frame, char card[4]) -{ - u8 phb = 0xff; - - while (data_len > 0) { - int len; - u8 tag = *data; - - if (tag == VPD_END_OF_AREA) - break; - len = *(data + 1) + (*(data + 2) * 256); - data += 3; - data_len -= 3; - if (tag == VPD_ID_STRING) - phb = iseries_parse_phbid(data, len); - else if (tag == VPD_VENDOR_AREA) - iseries_parse_mfg_area((struct mfg_vpd_area *)data, len, - agent, &phb, frame, card); - /* Point to next Area. */ - data += len; - data_len -= len; - } -} - -static int __init iseries_get_location_code(u16 bus, HvAgentId agent, - u8 *frame, char card[4]) -{ - int status = 0; - int bus_vpd_len = 0; - u8 *bus_vpd = kmalloc(BUS_VPDSIZE, GFP_KERNEL); - - if (bus_vpd == NULL) { - printk("PCI: Bus VPD Buffer allocation failure.\n"); - return 0; - } - bus_vpd_len = HvCallPci_getBusVpd(bus, iseries_hv_addr(bus_vpd), - BUS_VPDSIZE); - if (bus_vpd_len == 0) { - printk("PCI: Bus VPD Buffer zero length.\n"); - goto out_free; - } - /* printk("PCI: bus_vpd: %p, %d\n",bus_vpd, bus_vpd_len); */ - /* Make sure this is what I think it is */ - if (*bus_vpd != VPD_ID_STRING) { - printk("PCI: Bus VPD Buffer missing starting tag.\n"); - goto out_free; - } - iseries_parse_vpd(bus_vpd, bus_vpd_len, agent, frame, card); - status = 1; -out_free: - kfree(bus_vpd); - return status; -} - -/* - * Prints the device information. - * - Pass in pci_dev* pointer to the device. - * - Pass in the device count - * - * Format: - * PCI: Bus 0, Device 26, Vendor 0x12AE Frame 1, Card C10 Ethernet - * controller - */ -static void __init iseries_device_information(struct pci_dev *pdev, - u16 bus, HvSubBusNumber subbus) -{ - u8 frame = 0; - char card[4]; - HvAgentId agent; - - agent = ISERIES_PCI_AGENTID(ISERIES_GET_DEVICE_FROM_SUBBUS(subbus), - ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus)); - - if (iseries_get_location_code(bus, agent, &frame, card)) { - printk(KERN_INFO "PCI: %s, Vendor %04X Frame%3d, " - "Card %4s 0x%04X\n", pci_name(pdev), pdev->vendor, - frame, card, (int)(pdev->class >> 8)); - } -} - -/* - * iomm_table_allocate_entry - * - * Adds pci_dev entry in address translation table - * - * - Allocates the number of entries required in table base on BAR - * size. - * - Allocates starting at BASE_IO_MEMORY and increases. - * - The size is round up to be a multiple of entry size. - * - CurrentIndex is incremented to keep track of the last entry. - * - Builds the resource entry for allocated BARs. - */ -static void __init iomm_table_allocate_entry(struct pci_dev *dev, int bar_num) -{ - struct resource *bar_res = &dev->resource[bar_num]; - long bar_size = pci_resource_len(dev, bar_num); - struct device_node *dn = pci_device_to_OF_node(dev); - - /* - * No space to allocate, quick exit, skip Allocation. - */ - if (bar_size == 0) - return; - /* - * Set Resource values. - */ - spin_lock(&iomm_table_lock); - bar_res->start = BASE_IO_MEMORY + - IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry; - bar_res->end = bar_res->start + bar_size - 1; - /* - * Allocate the number of table entries needed for BAR. - */ - while (bar_size > 0 ) { - iomm_table[current_iomm_table_entry] = dn; - ds_addr_table[current_iomm_table_entry] = - iseries_ds_addr(dn) | (bar_num << 24); - bar_size -= IOMM_TABLE_ENTRY_SIZE; - ++current_iomm_table_entry; - } - max_io_memory = BASE_IO_MEMORY + - IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry; - spin_unlock(&iomm_table_lock); -} - -/* - * allocate_device_bars - * - * - Allocates ALL pci_dev BAR's and updates the resources with the - * BAR value. BARS with zero length will have the resources - * The HvCallPci_getBarParms is used to get the size of the BAR - * space. It calls iomm_table_allocate_entry to allocate - * each entry. - * - Loops through The Bar resources(0 - 5) including the ROM - * is resource(6). - */ -static void __init allocate_device_bars(struct pci_dev *dev) -{ - int bar_num; - - for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) - iomm_table_allocate_entry(dev, bar_num); -} - -/* - * Log error information to system console. - * Filter out the device not there errors. - * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx - * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx - * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx - */ -static void pci_log_error(char *error, int bus, int subbus, - int agent, int hv_res) -{ - if (hv_res == 0x0302) - return; - printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X", - error, bus, subbus, agent, hv_res); -} - -/* - * Look down the chain to find the matching Device Device - */ -static struct device_node *find_device_node(int bus, int devfn) -{ - struct device_node *node; - - for (node = NULL; (node = of_find_all_nodes(node)); ) { - struct pci_dn *pdn = PCI_DN(node); - - if (pdn && (bus == pdn->busno) && (devfn == pdn->devfn)) - return node; - } - return NULL; -} - -/* - * iSeries_pcibios_fixup_resources - * - * Fixes up all resources for devices - */ -void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev) -{ - const u32 *agent; - const u32 *sub_bus; - unsigned char bus = pdev->bus->number; - struct device_node *node; - int i; - - node = pci_device_to_OF_node(pdev); - pr_debug("PCI: iSeries %s, pdev %p, node %p\n", - pci_name(pdev), pdev, node); - if (!node) { - printk("PCI: %s disabled, device tree entry not found !\n", - pci_name(pdev)); - for (i = 0; i <= PCI_ROM_RESOURCE; i++) - pdev->resource[i].flags = 0; - return; - } - sub_bus = of_get_property(node, "linux,subbus", NULL); - agent = of_get_property(node, "linux,agent-id", NULL); - if (agent && sub_bus) { - u8 irq = iSeries_allocate_IRQ(bus, 0, *sub_bus); - int err; - - err = HvCallXm_connectBusUnit(bus, *sub_bus, *agent, irq); - if (err) - pci_log_error("Connect Bus Unit", - bus, *sub_bus, *agent, err); - else { - err = HvCallPci_configStore8(bus, *sub_bus, - *agent, PCI_INTERRUPT_LINE, irq); - if (err) - pci_log_error("PciCfgStore Irq Failed!", - bus, *sub_bus, *agent, err); - else - pdev->irq = irq; - } - } - - allocate_device_bars(pdev); - if (likely(sub_bus)) - iseries_device_information(pdev, bus, *sub_bus); - else - printk(KERN_ERR "PCI: Device node %s has missing or invalid " - "linux,subbus property\n", node->full_name); -} - -/* - * iSeries_pci_final_fixup(void) - */ -void __init iSeries_pci_final_fixup(void) -{ - /* Fix up at the device node and pci_dev relationship */ - mf_display_src(0xC9000100); - iSeries_activate_IRQs(); - mf_display_src(0xC9000200); -} - -/* - * Config space read and write functions. - * For now at least, we look for the device node for the bus and devfn - * that we are asked to access. It may be possible to translate the devfn - * to a subbus and deviceid more directly. - */ -static u64 hv_cfg_read_func[4] = { - HvCallPciConfigLoad8, HvCallPciConfigLoad16, - HvCallPciConfigLoad32, HvCallPciConfigLoad32 -}; - -static u64 hv_cfg_write_func[4] = { - HvCallPciConfigStore8, HvCallPciConfigStore16, - HvCallPciConfigStore32, HvCallPciConfigStore32 -}; - -/* - * Read PCI config space - */ -static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int offset, int size, u32 *val) -{ - struct device_node *node = find_device_node(bus->number, devfn); - u64 fn; - struct HvCallPci_LoadReturn ret; - - if (node == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - if (offset > 255) { - *val = ~0; - return PCIBIOS_BAD_REGISTER_NUMBER; - } - - fn = hv_cfg_read_func[(size - 1) & 3]; - HvCall3Ret16(fn, &ret, iseries_ds_addr(node), offset, 0); - - if (ret.rc != 0) { - *val = ~0; - return PCIBIOS_DEVICE_NOT_FOUND; /* or something */ - } - - *val = ret.value; - return 0; -} - -/* - * Write PCI config space - */ - -static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int offset, int size, u32 val) -{ - struct device_node *node = find_device_node(bus->number, devfn); - u64 fn; - u64 ret; - - if (node == NULL) - return PCIBIOS_DEVICE_NOT_FOUND; - if (offset > 255) - return PCIBIOS_BAD_REGISTER_NUMBER; - - fn = hv_cfg_write_func[(size - 1) & 3]; - ret = HvCall4(fn, iseries_ds_addr(node), offset, val, 0); - - if (ret != 0) - return PCIBIOS_DEVICE_NOT_FOUND; - - return 0; -} - -static struct pci_ops iSeries_pci_ops = { - .read = iSeries_pci_read_config, - .write = iSeries_pci_write_config -}; - -/* - * Check Return Code - * -> On Failure, print and log information. - * Increment Retry Count, if exceeds max, panic partition. - * - * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234 - * PCI: Device 23.90 ReadL Retry( 1) - * PCI: Device 23.90 ReadL Retry Successful(1) - */ -static int check_return_code(char *type, struct device_node *dn, - int *retry, u64 ret) -{ - if (ret != 0) { - struct pci_dn *pdn = PCI_DN(dn); - - (*retry)++; - printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n", - type, pdn->busno, pdn->devfn, - *retry, (int)ret); - /* - * Bump the retry and check for retry count exceeded. - * If, Exceeded, panic the system. - */ - if (((*retry) > PCI_RETRY_MAX) && - (limit_pci_retries > 0)) { - mf_display_src(0xB6000103); - panic_timeout = 0; - panic("PCI: Hardware I/O Error, SRC B6000103, " - "Automatic Reboot Disabled.\n"); - } - return -1; /* Retry Try */ - } - return 0; -} - -/* - * Translate the I/O Address into a device node, bar, and bar offset. - * Note: Make sure the passed variable end up on the stack to avoid - * the exposure of being device global. - */ -static inline struct device_node *xlate_iomm_address( - const volatile void __iomem *addr, - u64 *dsaptr, u64 *bar_offset, const char *func) -{ - unsigned long orig_addr; - unsigned long base_addr; - unsigned long ind; - struct device_node *dn; - - orig_addr = (unsigned long __force)addr; - if ((orig_addr < BASE_IO_MEMORY) || (orig_addr >= max_io_memory)) { - static DEFINE_RATELIMIT_STATE(ratelimit, 60 * HZ, 10); - - if (__ratelimit(&ratelimit)) - printk(KERN_ERR - "iSeries_%s: invalid access at IO address %p\n", - func, addr); - return NULL; - } - base_addr = orig_addr - BASE_IO_MEMORY; - ind = base_addr / IOMM_TABLE_ENTRY_SIZE; - dn = iomm_table[ind]; - - if (dn != NULL) { - *dsaptr = ds_addr_table[ind]; - *bar_offset = base_addr % IOMM_TABLE_ENTRY_SIZE; - } else - panic("PCI: Invalid PCI IO address detected!\n"); - return dn; -} - -/* - * Read MM I/O Instructions for the iSeries - * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal - * else, data is returned in Big Endian format. - */ -static u8 iseries_readb(const volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - struct HvCallPci_LoadReturn ret; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "read_byte"); - - if (dn == NULL) - return 0xff; - do { - HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, bar_offset, 0); - } while (check_return_code("RDB", dn, &retry, ret.rc) != 0); - - return ret.value; -} - -static u16 iseries_readw_be(const volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - struct HvCallPci_LoadReturn ret; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "read_word"); - - if (dn == NULL) - return 0xffff; - do { - HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa, - bar_offset, 0); - } while (check_return_code("RDW", dn, &retry, ret.rc) != 0); - - return ret.value; -} - -static u32 iseries_readl_be(const volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - struct HvCallPci_LoadReturn ret; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "read_long"); - - if (dn == NULL) - return 0xffffffff; - do { - HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa, - bar_offset, 0); - } while (check_return_code("RDL", dn, &retry, ret.rc) != 0); - - return ret.value; -} - -/* - * Write MM I/O Instructions for the iSeries - * - */ -static void iseries_writeb(u8 data, volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - u64 rc; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "write_byte"); - - if (dn == NULL) - return; - do { - rc = HvCall4(HvCallPciBarStore8, dsa, bar_offset, data, 0); - } while (check_return_code("WWB", dn, &retry, rc) != 0); -} - -static void iseries_writew_be(u16 data, volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - u64 rc; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "write_word"); - - if (dn == NULL) - return; - do { - rc = HvCall4(HvCallPciBarStore16, dsa, bar_offset, data, 0); - } while (check_return_code("WWW", dn, &retry, rc) != 0); -} - -static void iseries_writel_be(u32 data, volatile void __iomem *addr) -{ - u64 bar_offset; - u64 dsa; - int retry = 0; - u64 rc; - struct device_node *dn = - xlate_iomm_address(addr, &dsa, &bar_offset, "write_long"); - - if (dn == NULL) - return; - do { - rc = HvCall4(HvCallPciBarStore32, dsa, bar_offset, data, 0); - } while (check_return_code("WWL", dn, &retry, rc) != 0); -} - -static u16 iseries_readw(const volatile void __iomem *addr) -{ - return le16_to_cpu(iseries_readw_be(addr)); -} - -static u32 iseries_readl(const volatile void __iomem *addr) -{ - return le32_to_cpu(iseries_readl_be(addr)); -} - -static void iseries_writew(u16 data, volatile void __iomem *addr) -{ - iseries_writew_be(cpu_to_le16(data), addr); -} - -static void iseries_writel(u32 data, volatile void __iomem *addr) -{ - iseries_writel(cpu_to_le32(data), addr); -} - -static void iseries_readsb(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - u8 *dst = buf; - while(count-- > 0) - *(dst++) = iseries_readb(addr); -} - -static void iseries_readsw(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - u16 *dst = buf; - while(count-- > 0) - *(dst++) = iseries_readw_be(addr); -} - -static void iseries_readsl(const volatile void __iomem *addr, void *buf, - unsigned long count) -{ - u32 *dst = buf; - while(count-- > 0) - *(dst++) = iseries_readl_be(addr); -} - -static void iseries_writesb(volatile void __iomem *addr, const void *buf, - unsigned long count) -{ - const u8 *src = buf; - while(count-- > 0) - iseries_writeb(*(src++), addr); -} - -static void iseries_writesw(volatile void __iomem *addr, const void *buf, - unsigned long count) -{ - const u16 *src = buf; - while(count-- > 0) - iseries_writew_be(*(src++), addr); -} - -static void iseries_writesl(volatile void __iomem *addr, const void *buf, - unsigned long count) -{ - const u32 *src = buf; - while(count-- > 0) - iseries_writel_be(*(src++), addr); -} - -static void iseries_memset_io(volatile void __iomem *addr, int c, - unsigned long n) -{ - volatile char __iomem *d = addr; - - while (n-- > 0) - iseries_writeb(c, d++); -} - -static void iseries_memcpy_fromio(void *dest, const volatile void __iomem *src, - unsigned long n) -{ - char *d = dest; - const volatile char __iomem *s = src; - - while (n-- > 0) - *d++ = iseries_readb(s++); -} - -static void iseries_memcpy_toio(volatile void __iomem *dest, const void *src, - unsigned long n) -{ - const char *s = src; - volatile char __iomem *d = dest; - - while (n-- > 0) - iseries_writeb(*s++, d++); -} - -/* We only set MMIO ops. The default PIO ops will be default - * to the MMIO ops + pci_io_base which is 0 on iSeries as - * expected so both should work. - * - * Note that we don't implement the readq/writeq versions as - * I don't know of an HV call for doing so. Thus, the default - * operation will be used instead, which will fault a the value - * return by iSeries for MMIO addresses always hits a non mapped - * area. This is as good as the BUG() we used to have there. - */ -static struct ppc_pci_io __initdata iseries_pci_io = { - .readb = iseries_readb, - .readw = iseries_readw, - .readl = iseries_readl, - .readw_be = iseries_readw_be, - .readl_be = iseries_readl_be, - .writeb = iseries_writeb, - .writew = iseries_writew, - .writel = iseries_writel, - .writew_be = iseries_writew_be, - .writel_be = iseries_writel_be, - .readsb = iseries_readsb, - .readsw = iseries_readsw, - .readsl = iseries_readsl, - .writesb = iseries_writesb, - .writesw = iseries_writesw, - .writesl = iseries_writesl, - .memset_io = iseries_memset_io, - .memcpy_fromio = iseries_memcpy_fromio, - .memcpy_toio = iseries_memcpy_toio, -}; - -/* - * iSeries_pcibios_init - * - * Description: - * This function checks for all possible system PCI host bridges that connect - * PCI buses. The system hypervisor is queried as to the guest partition - * ownership status. A pci_controller is built for any bus which is partially - * owned or fully owned by this guest partition. - */ -void __init iSeries_pcibios_init(void) -{ - struct pci_controller *phb; - struct device_node *root = of_find_node_by_path("/"); - struct device_node *node = NULL; - - /* Install IO hooks */ - ppc_pci_io = iseries_pci_io; - - pci_probe_only = 1; - - /* iSeries has no IO space in the common sense, it needs to set - * the IO base to 0 - */ - pci_io_base = 0; - - if (root == NULL) { - printk(KERN_CRIT "iSeries_pcibios_init: can't find root " - "of device tree\n"); - return; - } - while ((node = of_get_next_child(root, node)) != NULL) { - HvBusNumber bus; - const u32 *busp; - - if ((node->type == NULL) || (strcmp(node->type, "pci") != 0)) - continue; - - busp = of_get_property(node, "bus-range", NULL); - if (busp == NULL) - continue; - bus = *busp; - printk("bus %d appears to exist\n", bus); - phb = pcibios_alloc_controller(node); - if (phb == NULL) - continue; - /* All legacy iSeries PHBs are in domain zero */ - phb->global_number = 0; - - phb->first_busno = bus; - phb->last_busno = bus; - phb->ops = &iSeries_pci_ops; - phb->io_base_virt = (void __iomem *)_IO_BASE; - phb->io_resource.flags = IORESOURCE_IO; - phb->io_resource.start = BASE_IO_MEMORY; - phb->io_resource.end = END_IO_MEMORY; - phb->io_resource.name = "iSeries PCI IO"; - phb->mem_resources[0].flags = IORESOURCE_MEM; - phb->mem_resources[0].start = BASE_IO_MEMORY; - phb->mem_resources[0].end = END_IO_MEMORY; - phb->mem_resources[0].name = "Series PCI MEM"; - } - - of_node_put(root); - - pci_devs_phb_init(); -} - diff --git a/arch/powerpc/platforms/iseries/pci.h b/arch/powerpc/platforms/iseries/pci.h deleted file mode 100644 index d9cf974c271..00000000000 --- a/arch/powerpc/platforms/iseries/pci.h +++ /dev/null @@ -1,58 +0,0 @@ -#ifndef _PLATFORMS_ISERIES_PCI_H -#define _PLATFORMS_ISERIES_PCI_H - -/* - * Created by Allan Trautman on Tue Feb 20, 2001. - * - * Define some useful macros for the iSeries pci routines. - * Copyright (C) 2001 Allan H Trautman, IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the: - * Free Software Foundation, Inc., - * 59 Temple Place, Suite 330, - * Boston, MA 02111-1307 USA - * - * Change Activity: - * Created Feb 20, 2001 - * Added device reset, March 22, 2001 - * Ported to ppc64, May 25, 2001 - * End Change Activity - */ - -/* - * Decodes Linux DevFn to iSeries DevFn, bridge device, or function. - * For Linux, see PCI_SLOT and PCI_FUNC in include/linux/pci.h - */ - -#define ISERIES_PCI_AGENTID(idsel, func) \ - (((idsel & 0x0F) << 4) | (func & 0x07)) -#define ISERIES_ENCODE_DEVICE(agentid) \ - ((0x10) | ((agentid & 0x20) >> 2) | (agentid & 0x07)) - -#define ISERIES_GET_DEVICE_FROM_SUBBUS(subbus) ((subbus >> 5) & 0x7) -#define ISERIES_GET_FUNCTION_FROM_SUBBUS(subbus) ((subbus >> 2) & 0x7) - -struct pci_dev; - -#ifdef CONFIG_PCI -extern void iSeries_pcibios_init(void); -extern void iSeries_pci_final_fixup(void); -extern void iSeries_pcibios_fixup_resources(struct pci_dev *dev); -#else -static inline void iSeries_pcibios_init(void) { } -static inline void iSeries_pci_final_fixup(void) { } -static inline void iSeries_pcibios_fixup_resources(struct pci_dev *dev) {} -#endif - -#endif /* _PLATFORMS_ISERIES_PCI_H */ diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c deleted file mode 100644 index 06763682db4..00000000000 --- a/arch/powerpc/platforms/iseries/proc.c +++ /dev/null @@ -1,120 +0,0 @@ -/* - * Copyright (C) 2001 Kyle A. Lucke IBM Corporation - * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/init.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/param.h> /* for HZ */ -#include <asm/paca.h> -#include <asm/processor.h> -#include <asm/time.h> -#include <asm/lppaca.h> -#include <asm/firmware.h> -#include <asm/iseries/hv_call_xm.h> - -#include "processor_vpd.h" -#include "main_store.h" - -static int __init iseries_proc_create(void) -{ - struct proc_dir_entry *e; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; - - e = proc_mkdir("iSeries", 0); - if (!e) - return 1; - - return 0; -} -core_initcall(iseries_proc_create); - -static unsigned long startTitan = 0; -static unsigned long startTb = 0; - -static int proc_titantod_show(struct seq_file *m, void *v) -{ - unsigned long tb0, titan_tod; - - tb0 = get_tb(); - titan_tod = HvCallXm_loadTod(); - - seq_printf(m, "Titan\n" ); - seq_printf(m, " time base = %016lx\n", tb0); - seq_printf(m, " titan tod = %016lx\n", titan_tod); - seq_printf(m, " xProcFreq = %016x\n", - xIoHriProcessorVpd[0].xProcFreq); - seq_printf(m, " xTimeBaseFreq = %016x\n", - xIoHriProcessorVpd[0].xTimeBaseFreq); - seq_printf(m, " tb_ticks_per_jiffy = %lu\n", tb_ticks_per_jiffy); - seq_printf(m, " tb_ticks_per_usec = %lu\n", tb_ticks_per_usec); - - if (!startTitan) { - startTitan = titan_tod; - startTb = tb0; - } else { - unsigned long titan_usec = (titan_tod - startTitan) >> 12; - unsigned long tb_ticks = (tb0 - startTb); - unsigned long titan_jiffies = titan_usec / (1000000/HZ); - unsigned long titan_jiff_usec = titan_jiffies * (1000000/HZ); - unsigned long titan_jiff_rem_usec = - titan_usec - titan_jiff_usec; - unsigned long tb_jiffies = tb_ticks / tb_ticks_per_jiffy; - unsigned long tb_jiff_ticks = tb_jiffies * tb_ticks_per_jiffy; - unsigned long tb_jiff_rem_ticks = tb_ticks - tb_jiff_ticks; - unsigned long tb_jiff_rem_usec = - tb_jiff_rem_ticks / tb_ticks_per_usec; - unsigned long new_tb_ticks_per_jiffy = - (tb_ticks * (1000000/HZ))/titan_usec; - - seq_printf(m, " titan elapsed = %lu uSec\n", titan_usec); - seq_printf(m, " tb elapsed = %lu ticks\n", tb_ticks); - seq_printf(m, " titan jiffies = %lu.%04lu\n", titan_jiffies, - titan_jiff_rem_usec); - seq_printf(m, " tb jiffies = %lu.%04lu\n", tb_jiffies, - tb_jiff_rem_usec); - seq_printf(m, " new tb_ticks_per_jiffy = %lu\n", - new_tb_ticks_per_jiffy); - } - - return 0; -} - -static int proc_titantod_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_titantod_show, NULL); -} - -static const struct file_operations proc_titantod_operations = { - .open = proc_titantod_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init iseries_proc_init(void) -{ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; - - proc_create("iSeries/titanTod", S_IFREG|S_IRUGO, NULL, - &proc_titantod_operations); - return 0; -} -__initcall(iseries_proc_init); diff --git a/arch/powerpc/platforms/iseries/processor_vpd.h b/arch/powerpc/platforms/iseries/processor_vpd.h deleted file mode 100644 index 7ac5d0d0dbf..00000000000 --- a/arch/powerpc/platforms/iseries/processor_vpd.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ISERIES_PROCESSOR_VPD_H -#define _ISERIES_PROCESSOR_VPD_H - -#include <asm/types.h> - -/* - * This struct maps Processor Vpd that is DMAd to SLIC by CSP - */ -struct IoHriProcessorVpd { - u8 xFormat; // VPD format indicator x00-x00 - u8 xProcStatus:8; // Processor State x01-x01 - u8 xSecondaryThreadCount; // Secondary thread cnt x02-x02 - u8 xSrcType:1; // Src Type x03-x03 - u8 xSrcSoft:1; // Src stay soft ... - u8 xSrcParable:1; // Src parable ... - u8 xRsvd1:5; // Reserved ... - u16 xHvPhysicalProcIndex; // Hypervisor physical proc index04-x05 - u16 xRsvd2; // Reserved x06-x07 - u32 xHwNodeId; // Hardware node id x08-x0B - u32 xHwProcId; // Hardware processor id x0C-x0F - - u32 xTypeNum; // Card Type/CCIN number x10-x13 - u32 xModelNum; // Model/Feature number x14-x17 - u64 xSerialNum; // Serial number x18-x1F - char xPartNum[12]; // Book Part or FPU number x20-x2B - char xMfgID[4]; // Manufacturing ID x2C-x2F - - u32 xProcFreq; // Processor Frequency x30-x33 - u32 xTimeBaseFreq; // Time Base Frequency x34-x37 - - u32 xChipEcLevel; // Chip EC Levels x38-x3B - u32 xProcIdReg; // PIR SPR value x3C-x3F - u32 xPVR; // PVR value x40-x43 - u8 xRsvd3[12]; // Reserved x44-x4F - - u32 xInstCacheSize; // Instruction cache size in KB x50-x53 - u32 xInstBlockSize; // Instruction cache block size x54-x57 - u32 xDataCacheOperandSize; // Data cache operand size x58-x5B - u32 xInstCacheOperandSize; // Inst cache operand size x5C-x5F - - u32 xDataL1CacheSizeKB; // L1 data cache size in KB x60-x63 - u32 xDataL1CacheLineSize; // L1 data cache block size x64-x67 - u64 xRsvd4; // Reserved x68-x6F - - u32 xDataL2CacheSizeKB; // L2 data cache size in KB x70-x73 - u32 xDataL2CacheLineSize; // L2 data cache block size x74-x77 - u64 xRsvd5; // Reserved x78-x7F - - u32 xDataL3CacheSizeKB; // L3 data cache size in KB x80-x83 - u32 xDataL3CacheLineSize; // L3 data cache block size x84-x87 - u64 xRsvd6; // Reserved x88-x8F - - u64 xFruLabel; // Card Location Label x90-x97 - u8 xSlotsOnCard; // Slots on card (0=no slots) x98-x98 - u8 xPartLocFlag; // Location flag (0-pluggable 1-imbedded) x99-x99 - u16 xSlotMapIndex; // Index in slot map table x9A-x9B - u8 xSmartCardPortNo; // Smart card port number x9C-x9C - u8 xRsvd7; // Reserved x9D-x9D - u16 xFrameIdAndRackUnit; // Frame ID and rack unit adr x9E-x9F - - u8 xRsvd8[24]; // Reserved xA0-xB7 - - char xProcSrc[72]; // CSP format SRC xB8-xFF -}; - -extern struct IoHriProcessorVpd xIoHriProcessorVpd[]; - -#endif /* _ISERIES_PROCESSOR_VPD_H */ diff --git a/arch/powerpc/platforms/iseries/release_data.h b/arch/powerpc/platforms/iseries/release_data.h deleted file mode 100644 index 6ad7d843e8f..00000000000 --- a/arch/powerpc/platforms/iseries/release_data.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ISERIES_RELEASE_DATA_H -#define _ISERIES_RELEASE_DATA_H - -/* - * This control block contains the critical information about the - * release so that it can be changed in the future (ie, the virtual - * address of the OS's NACA). - */ -#include <asm/types.h> -#include "naca.h" - -/* - * When we IPL a secondary partition, we will check if if the - * secondary xMinPlicVrmIndex > the primary xVrmIndex. - * If it is then this tells PLIC that this secondary is not - * supported running on this "old" of a level of PLIC. - * - * Likewise, we will compare the primary xMinSlicVrmIndex to - * the secondary xVrmIndex. - * If the primary xMinSlicVrmDelta > secondary xVrmDelta then we - * know that this PLIC does not support running an OS "that old". - */ - -#define HVREL_TAGSINACTIVE 0x8000 -#define HVREL_32BIT 0x4000 -#define HVREL_NOSHAREDPROCS 0x2000 -#define HVREL_NOHMT 0x1000 - -struct HvReleaseData { - u32 xDesc; /* Descriptor "HvRD" ebcdic x00-x03 */ - u16 xSize; /* Size of this control block x04-x05 */ - u16 xVpdAreasPtrOffset; /* Offset in NACA of ItVpdAreas x06-x07 */ - struct naca_struct *xSlicNacaAddr; /* Virt addr of SLIC NACA x08-x0F */ - u32 xMsNucDataOffset; /* Offset of Linux Mapping Data x10-x13 */ - u32 xRsvd1; /* Reserved x14-x17 */ - u16 xFlags; - u16 xVrmIndex; /* VRM Index of OS image x1A-x1B */ - u16 xMinSupportedPlicVrmIndex; /* Min PLIC level (soft) x1C-x1D */ - u16 xMinCompatablePlicVrmIndex; /* Min PLIC levelP (hard) x1E-x1F */ - char xVrmName[12]; /* Displayable name x20-x2B */ - char xRsvd3[20]; /* Reserved x2C-x3F */ -}; - -extern const struct HvReleaseData hvReleaseData; - -#endif /* _ISERIES_RELEASE_DATA_H */ diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c deleted file mode 100644 index a5fbf4cb632..00000000000 --- a/arch/powerpc/platforms/iseries/setup.c +++ /dev/null @@ -1,718 +0,0 @@ -/* - * Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com> - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM iSeries LPAR. Adapted from original code by Grant Erickson and - * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek - * <dan@net4x.com>. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <linux/init.h> -#include <linux/threads.h> -#include <linux/smp.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/export.h> -#include <linux/seq_file.h> -#include <linux/kdev_t.h> -#include <linux/kexec.h> -#include <linux/major.h> -#include <linux/root_dev.h> -#include <linux/kernel.h> -#include <linux/hrtimer.h> -#include <linux/tick.h> - -#include <asm/processor.h> -#include <asm/machdep.h> -#include <asm/page.h> -#include <asm/mmu.h> -#include <asm/pgtable.h> -#include <asm/mmu_context.h> -#include <asm/cputable.h> -#include <asm/sections.h> -#include <asm/iommu.h> -#include <asm/firmware.h> -#include <asm/system.h> -#include <asm/time.h> -#include <asm/paca.h> -#include <asm/cache.h> -#include <asm/abs_addr.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/hv_call_event.h> -#include <asm/iseries/hv_call_xm.h> -#include <asm/iseries/it_lp_queue.h> -#include <asm/iseries/mf.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/lpar_map.h> -#include <asm/udbg.h> -#include <asm/irq.h> - -#include "naca.h" -#include "setup.h" -#include "irq.h" -#include "vpd_areas.h" -#include "processor_vpd.h" -#include "it_lp_naca.h" -#include "main_store.h" -#include "call_sm.h" -#include "call_hpt.h" -#include "pci.h" - -#ifdef DEBUG -#define DBG(fmt...) udbg_printf(fmt) -#else -#define DBG(fmt...) -#endif - -/* Function Prototypes */ -static unsigned long build_iSeries_Memory_Map(void); -static void iseries_shared_idle(void); -static void iseries_dedicated_idle(void); - - -struct MemoryBlock { - unsigned long absStart; - unsigned long absEnd; - unsigned long logicalStart; - unsigned long logicalEnd; -}; - -/* - * Process the main store vpd to determine where the holes in memory are - * and return the number of physical blocks and fill in the array of - * block data. - */ -static unsigned long iSeries_process_Condor_mainstore_vpd( - struct MemoryBlock *mb_array, unsigned long max_entries) -{ - unsigned long holeFirstChunk, holeSizeChunks; - unsigned long numMemoryBlocks = 1; - struct IoHriMainStoreSegment4 *msVpd = - (struct IoHriMainStoreSegment4 *)xMsVpd; - unsigned long holeStart = msVpd->nonInterleavedBlocksStartAdr; - unsigned long holeEnd = msVpd->nonInterleavedBlocksEndAdr; - unsigned long holeSize = holeEnd - holeStart; - - printk("Mainstore_VPD: Condor\n"); - /* - * Determine if absolute memory has any - * holes so that we can interpret the - * access map we get back from the hypervisor - * correctly. - */ - mb_array[0].logicalStart = 0; - mb_array[0].logicalEnd = 0x100000000UL; - mb_array[0].absStart = 0; - mb_array[0].absEnd = 0x100000000UL; - - if (holeSize) { - numMemoryBlocks = 2; - holeStart = holeStart & 0x000fffffffffffffUL; - holeStart = addr_to_chunk(holeStart); - holeFirstChunk = holeStart; - holeSize = addr_to_chunk(holeSize); - holeSizeChunks = holeSize; - printk( "Main store hole: start chunk = %0lx, size = %0lx chunks\n", - holeFirstChunk, holeSizeChunks ); - mb_array[0].logicalEnd = holeFirstChunk; - mb_array[0].absEnd = holeFirstChunk; - mb_array[1].logicalStart = holeFirstChunk; - mb_array[1].logicalEnd = 0x100000000UL - holeSizeChunks; - mb_array[1].absStart = holeFirstChunk + holeSizeChunks; - mb_array[1].absEnd = 0x100000000UL; - } - return numMemoryBlocks; -} - -#define MaxSegmentAreas 32 -#define MaxSegmentAdrRangeBlocks 128 -#define MaxAreaRangeBlocks 4 - -static unsigned long iSeries_process_Regatta_mainstore_vpd( - struct MemoryBlock *mb_array, unsigned long max_entries) -{ - struct IoHriMainStoreSegment5 *msVpdP = - (struct IoHriMainStoreSegment5 *)xMsVpd; - unsigned long numSegmentBlocks = 0; - u32 existsBits = msVpdP->msAreaExists; - unsigned long area_num; - - printk("Mainstore_VPD: Regatta\n"); - - for (area_num = 0; area_num < MaxSegmentAreas; ++area_num ) { - unsigned long numAreaBlocks; - struct IoHriMainStoreArea4 *currentArea; - - if (existsBits & 0x80000000) { - unsigned long block_num; - - currentArea = &msVpdP->msAreaArray[area_num]; - numAreaBlocks = currentArea->numAdrRangeBlocks; - printk("ms_vpd: processing area %2ld blocks=%ld", - area_num, numAreaBlocks); - for (block_num = 0; block_num < numAreaBlocks; - ++block_num ) { - /* Process an address range block */ - struct MemoryBlock tempBlock; - unsigned long i; - - tempBlock.absStart = - (unsigned long)currentArea->xAdrRangeBlock[block_num].blockStart; - tempBlock.absEnd = - (unsigned long)currentArea->xAdrRangeBlock[block_num].blockEnd; - tempBlock.logicalStart = 0; - tempBlock.logicalEnd = 0; - printk("\n block %ld absStart=%016lx absEnd=%016lx", - block_num, tempBlock.absStart, - tempBlock.absEnd); - - for (i = 0; i < numSegmentBlocks; ++i) { - if (mb_array[i].absStart == - tempBlock.absStart) - break; - } - if (i == numSegmentBlocks) { - if (numSegmentBlocks == max_entries) - panic("iSeries_process_mainstore_vpd: too many memory blocks"); - mb_array[numSegmentBlocks] = tempBlock; - ++numSegmentBlocks; - } else - printk(" (duplicate)"); - } - printk("\n"); - } - existsBits <<= 1; - } - /* Now sort the blocks found into ascending sequence */ - if (numSegmentBlocks > 1) { - unsigned long m, n; - - for (m = 0; m < numSegmentBlocks - 1; ++m) { - for (n = numSegmentBlocks - 1; m < n; --n) { - if (mb_array[n].absStart < - mb_array[n-1].absStart) { - struct MemoryBlock tempBlock; - - tempBlock = mb_array[n]; - mb_array[n] = mb_array[n-1]; - mb_array[n-1] = tempBlock; - } - } - } - } - /* - * Assign "logical" addresses to each block. These - * addresses correspond to the hypervisor "bitmap" space. - * Convert all addresses into units of 256K chunks. - */ - { - unsigned long i, nextBitmapAddress; - - printk("ms_vpd: %ld sorted memory blocks\n", numSegmentBlocks); - nextBitmapAddress = 0; - for (i = 0; i < numSegmentBlocks; ++i) { - unsigned long length = mb_array[i].absEnd - - mb_array[i].absStart; - - mb_array[i].logicalStart = nextBitmapAddress; - mb_array[i].logicalEnd = nextBitmapAddress + length; - nextBitmapAddress += length; - printk(" Bitmap range: %016lx - %016lx\n" - " Absolute range: %016lx - %016lx\n", - mb_array[i].logicalStart, - mb_array[i].logicalEnd, - mb_array[i].absStart, mb_array[i].absEnd); - mb_array[i].absStart = addr_to_chunk(mb_array[i].absStart & - 0x000fffffffffffffUL); - mb_array[i].absEnd = addr_to_chunk(mb_array[i].absEnd & - 0x000fffffffffffffUL); - mb_array[i].logicalStart = - addr_to_chunk(mb_array[i].logicalStart); - mb_array[i].logicalEnd = addr_to_chunk(mb_array[i].logicalEnd); - } - } - - return numSegmentBlocks; -} - -static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array, - unsigned long max_entries) -{ - unsigned long i; - unsigned long mem_blocks = 0; - - if (mmu_has_feature(MMU_FTR_SLB)) - mem_blocks = iSeries_process_Regatta_mainstore_vpd(mb_array, - max_entries); - else - mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array, - max_entries); - - printk("Mainstore_VPD: numMemoryBlocks = %ld\n", mem_blocks); - for (i = 0; i < mem_blocks; ++i) { - printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n" - " abs chunks %016lx - %016lx\n", - i, mb_array[i].logicalStart, mb_array[i].logicalEnd, - mb_array[i].absStart, mb_array[i].absEnd); - } - return mem_blocks; -} - -static void __init iSeries_get_cmdline(void) -{ - char *p, *q; - - /* copy the command line parameter from the primary VSP */ - HvCallEvent_dmaToSp(cmd_line, 2 * 64* 1024, 256, - HvLpDma_Direction_RemoteToLocal); - - p = cmd_line; - q = cmd_line + 255; - while(p < q) { - if (!*p || *p == '\n') - break; - ++p; - } - *p = 0; -} - -static void __init iSeries_init_early(void) -{ - DBG(" -> iSeries_init_early()\n"); - - /* Snapshot the timebase, for use in later recalibration */ - iSeries_time_init_early(); - - /* - * Initialize the DMA/TCE management - */ - iommu_init_early_iSeries(); - - /* Initialize machine-dependency vectors */ -#ifdef CONFIG_SMP - smp_init_iSeries(); -#endif - - /* Associate Lp Event Queue 0 with processor 0 */ - HvCallEvent_setLpEventQueueInterruptProc(0, 0); - - mf_init(); - - DBG(" <- iSeries_init_early()\n"); -} - -struct mschunks_map mschunks_map = { - /* XXX We don't use these, but Piranha might need them. */ - .chunk_size = MSCHUNKS_CHUNK_SIZE, - .chunk_shift = MSCHUNKS_CHUNK_SHIFT, - .chunk_mask = MSCHUNKS_OFFSET_MASK, -}; -EXPORT_SYMBOL(mschunks_map); - -static void mschunks_alloc(unsigned long num_chunks) -{ - klimit = _ALIGN(klimit, sizeof(u32)); - mschunks_map.mapping = (u32 *)klimit; - klimit += num_chunks * sizeof(u32); - mschunks_map.num_chunks = num_chunks; -} - -/* - * The iSeries may have very large memories ( > 128 GB ) and a partition - * may get memory in "chunks" that may be anywhere in the 2**52 real - * address space. The chunks are 256K in size. To map this to the - * memory model Linux expects, the AS/400 specific code builds a - * translation table to translate what Linux thinks are "physical" - * addresses to the actual real addresses. This allows us to make - * it appear to Linux that we have contiguous memory starting at - * physical address zero while in fact this could be far from the truth. - * To avoid confusion, I'll let the words physical and/or real address - * apply to the Linux addresses while I'll use "absolute address" to - * refer to the actual hardware real address. - * - * build_iSeries_Memory_Map gets information from the Hypervisor and - * looks at the Main Store VPD to determine the absolute addresses - * of the memory that has been assigned to our partition and builds - * a table used to translate Linux's physical addresses to these - * absolute addresses. Absolute addresses are needed when - * communicating with the hypervisor (e.g. to build HPT entries) - * - * Returns the physical memory size - */ - -static unsigned long __init build_iSeries_Memory_Map(void) -{ - u32 loadAreaFirstChunk, loadAreaLastChunk, loadAreaSize; - u32 nextPhysChunk; - u32 hptFirstChunk, hptLastChunk, hptSizeChunks, hptSizePages; - u32 totalChunks,moreChunks; - u32 currChunk, thisChunk, absChunk; - u32 currDword; - u32 chunkBit; - u64 map; - struct MemoryBlock mb[32]; - unsigned long numMemoryBlocks, curBlock; - - /* Chunk size on iSeries is 256K bytes */ - totalChunks = (u32)HvLpConfig_getMsChunks(); - mschunks_alloc(totalChunks); - - /* - * Get absolute address of our load area - * and map it to physical address 0 - * This guarantees that the loadarea ends up at physical 0 - * otherwise, it might not be returned by PLIC as the first - * chunks - */ - - loadAreaFirstChunk = (u32)addr_to_chunk(itLpNaca.xLoadAreaAddr); - loadAreaSize = itLpNaca.xLoadAreaChunks; - - /* - * Only add the pages already mapped here. - * Otherwise we might add the hpt pages - * The rest of the pages of the load area - * aren't in the HPT yet and can still - * be assigned an arbitrary physical address - */ - if ((loadAreaSize * 64) > HvPagesToMap) - loadAreaSize = HvPagesToMap / 64; - - loadAreaLastChunk = loadAreaFirstChunk + loadAreaSize - 1; - - /* - * TODO Do we need to do something if the HPT is in the 64MB load area? - * This would be required if the itLpNaca.xLoadAreaChunks includes - * the HPT size - */ - - printk("Mapping load area - physical addr = 0000000000000000\n" - " absolute addr = %016lx\n", - chunk_to_addr(loadAreaFirstChunk)); - printk("Load area size %dK\n", loadAreaSize * 256); - - for (nextPhysChunk = 0; nextPhysChunk < loadAreaSize; ++nextPhysChunk) - mschunks_map.mapping[nextPhysChunk] = - loadAreaFirstChunk + nextPhysChunk; - - /* - * Get absolute address of our HPT and remember it so - * we won't map it to any physical address - */ - hptFirstChunk = (u32)addr_to_chunk(HvCallHpt_getHptAddress()); - hptSizePages = (u32)HvCallHpt_getHptPages(); - hptSizeChunks = hptSizePages >> - (MSCHUNKS_CHUNK_SHIFT - HW_PAGE_SHIFT); - hptLastChunk = hptFirstChunk + hptSizeChunks - 1; - - printk("HPT absolute addr = %016lx, size = %dK\n", - chunk_to_addr(hptFirstChunk), hptSizeChunks * 256); - - /* - * Determine if absolute memory has any - * holes so that we can interpret the - * access map we get back from the hypervisor - * correctly. - */ - numMemoryBlocks = iSeries_process_mainstore_vpd(mb, 32); - - /* - * Process the main store access map from the hypervisor - * to build up our physical -> absolute translation table - */ - curBlock = 0; - currChunk = 0; - currDword = 0; - moreChunks = totalChunks; - - while (moreChunks) { - map = HvCallSm_get64BitsOfAccessMap(itLpNaca.xLpIndex, - currDword); - thisChunk = currChunk; - while (map) { - chunkBit = map >> 63; - map <<= 1; - if (chunkBit) { - --moreChunks; - while (thisChunk >= mb[curBlock].logicalEnd) { - ++curBlock; - if (curBlock >= numMemoryBlocks) - panic("out of memory blocks"); - } - if (thisChunk < mb[curBlock].logicalStart) - panic("memory block error"); - - absChunk = mb[curBlock].absStart + - (thisChunk - mb[curBlock].logicalStart); - if (((absChunk < hptFirstChunk) || - (absChunk > hptLastChunk)) && - ((absChunk < loadAreaFirstChunk) || - (absChunk > loadAreaLastChunk))) { - mschunks_map.mapping[nextPhysChunk] = - absChunk; - ++nextPhysChunk; - } - } - ++thisChunk; - } - ++currDword; - currChunk += 64; - } - - /* - * main store size (in chunks) is - * totalChunks - hptSizeChunks - * which should be equal to - * nextPhysChunk - */ - return chunk_to_addr(nextPhysChunk); -} - -/* - * Document me. - */ -static void __init iSeries_setup_arch(void) -{ - if (get_lppaca()->shared_proc) { - ppc_md.idle_loop = iseries_shared_idle; - printk(KERN_DEBUG "Using shared processor idle loop\n"); - } else { - ppc_md.idle_loop = iseries_dedicated_idle; - printk(KERN_DEBUG "Using dedicated idle loop\n"); - } - - /* Setup the Lp Event Queue */ - setup_hvlpevent_queue(); - - printk("Max logical processors = %d\n", - itVpdAreas.xSlicMaxLogicalProcs); - printk("Max physical processors = %d\n", - itVpdAreas.xSlicMaxPhysicalProcs); - - iSeries_pcibios_init(); -} - -static void iSeries_show_cpuinfo(struct seq_file *m) -{ - seq_printf(m, "machine\t\t: 64-bit iSeries Logical Partition\n"); -} - -static void __init iSeries_progress(char * st, unsigned short code) -{ - printk("Progress: [%04x] - %s\n", (unsigned)code, st); - mf_display_progress(code); -} - -static void __init iSeries_fixup_klimit(void) -{ - /* - * Change klimit to take into account any ram disk - * that may be included - */ - if (naca.xRamDisk) - klimit = KERNELBASE + (u64)naca.xRamDisk + - (naca.xRamDiskSize * HW_PAGE_SIZE); -} - -static int __init iSeries_src_init(void) -{ - /* clear the progress line */ - if (firmware_has_feature(FW_FEATURE_ISERIES)) - ppc_md.progress(" ", 0xffff); - return 0; -} - -late_initcall(iSeries_src_init); - -static inline void process_iSeries_events(void) -{ - asm volatile ("li 0,0x5555; sc" : : : "r0", "r3"); -} - -static void yield_shared_processor(void) -{ - unsigned long tb; - - HvCall_setEnabledInterrupts(HvCall_MaskIPI | - HvCall_MaskLpEvent | - HvCall_MaskLpProd | - HvCall_MaskTimeout); - - tb = get_tb(); - /* Compute future tb value when yield should expire */ - HvCall_yieldProcessor(HvCall_YieldTimed, tb+tb_ticks_per_jiffy); - - /* - * The decrementer stops during the yield. Force a fake decrementer - * here and let the timer_interrupt code sort out the actual time. - */ - get_lppaca()->int_dword.fields.decr_int = 1; - ppc64_runlatch_on(); - process_iSeries_events(); -} - -static void iseries_shared_idle(void) -{ - while (1) { - tick_nohz_idle_enter(); - rcu_idle_enter(); - while (!need_resched() && !hvlpevent_is_pending()) { - local_irq_disable(); - ppc64_runlatch_off(); - - /* Recheck with irqs off */ - if (!need_resched() && !hvlpevent_is_pending()) - yield_shared_processor(); - - HMT_medium(); - local_irq_enable(); - } - - ppc64_runlatch_on(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - - if (hvlpevent_is_pending()) - process_iSeries_events(); - - schedule_preempt_disabled(); - } -} - -static void iseries_dedicated_idle(void) -{ - set_thread_flag(TIF_POLLING_NRFLAG); - - while (1) { - tick_nohz_idle_enter(); - rcu_idle_enter(); - if (!need_resched()) { - while (!need_resched()) { - ppc64_runlatch_off(); - HMT_low(); - - if (hvlpevent_is_pending()) { - HMT_medium(); - ppc64_runlatch_on(); - process_iSeries_events(); - } - } - - HMT_medium(); - } - - ppc64_runlatch_on(); - rcu_idle_exit(); - tick_nohz_idle_exit(); - schedule_preempt_disabled(); - } -} - -static void __iomem *iseries_ioremap(phys_addr_t address, unsigned long size, - unsigned long flags, void *caller) -{ - return (void __iomem *)address; -} - -static void iseries_iounmap(volatile void __iomem *token) -{ -} - -static int __init iseries_probe(void) -{ - unsigned long root = of_get_flat_dt_root(); - if (!of_flat_dt_is_compatible(root, "IBM,iSeries")) - return 0; - - hpte_init_iSeries(); - /* iSeries does not support 16M pages */ - cur_cpu_spec->mmu_features &= ~MMU_FTR_16M_PAGE; - - return 1; -} - -#ifdef CONFIG_KEXEC -static int iseries_kexec_prepare(struct kimage *image) -{ - return -ENOSYS; -} -#endif - -define_machine(iseries) { - .name = "iSeries", - .setup_arch = iSeries_setup_arch, - .show_cpuinfo = iSeries_show_cpuinfo, - .init_IRQ = iSeries_init_IRQ, - .get_irq = iSeries_get_irq, - .init_early = iSeries_init_early, - .pcibios_fixup = iSeries_pci_final_fixup, - .pcibios_fixup_resources= iSeries_pcibios_fixup_resources, - .restart = mf_reboot, - .power_off = mf_power_off, - .halt = mf_power_off, - .get_boot_time = iSeries_get_boot_time, - .set_rtc_time = iSeries_set_rtc_time, - .get_rtc_time = iSeries_get_rtc_time, - .calibrate_decr = generic_calibrate_decr, - .progress = iSeries_progress, - .probe = iseries_probe, - .ioremap = iseries_ioremap, - .iounmap = iseries_iounmap, -#ifdef CONFIG_KEXEC - .machine_kexec_prepare = iseries_kexec_prepare, -#endif - /* XXX Implement enable_pmcs for iSeries */ -}; - -void * __init iSeries_early_setup(void) -{ - unsigned long phys_mem_size; - - /* Identify CPU type. This is done again by the common code later - * on but calling this function multiple times is fine. - */ - identify_cpu(0, mfspr(SPRN_PVR)); - initialise_paca(&boot_paca, 0); - - powerpc_firmware_features |= FW_FEATURE_ISERIES; - powerpc_firmware_features |= FW_FEATURE_LPAR; - -#ifdef CONFIG_SMP - /* On iSeries we know we can never have more than 64 cpus */ - nr_cpu_ids = max(nr_cpu_ids, 64); -#endif - - iSeries_fixup_klimit(); - - /* - * Initialize the table which translate Linux physical addresses to - * AS/400 absolute addresses - */ - phys_mem_size = build_iSeries_Memory_Map(); - - iSeries_get_cmdline(); - - return (void *) __pa(build_flat_dt(phys_mem_size)); -} - -static void hvputc(char c) -{ - if (c == '\n') - hvputc('\r'); - - HvCall_writeLogBuffer(&c, 1); -} - -void __init udbg_init_iseries(void) -{ - udbg_putc = hvputc; -} diff --git a/arch/powerpc/platforms/iseries/setup.h b/arch/powerpc/platforms/iseries/setup.h deleted file mode 100644 index 729754bbb01..00000000000 --- a/arch/powerpc/platforms/iseries/setup.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (c) 2000 Mike Corrigan <mikejc@us.ibm.com> - * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> - * - * Description: - * Architecture- / platform-specific boot-time initialization code for - * the IBM AS/400 LPAR. Adapted from original code by Grant Erickson and - * code by Gary Thomas, Cort Dougan <cort@cs.nmt.edu>, and Dan Malek - * <dan@netx4.com>. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef __ISERIES_SETUP_H__ -#define __ISERIES_SETUP_H__ - -extern void *iSeries_early_setup(void); -extern unsigned long iSeries_get_boot_time(void); -extern int iSeries_set_rtc_time(struct rtc_time *tm); -extern void iSeries_get_rtc_time(struct rtc_time *tm); - -extern void *build_flat_dt(unsigned long phys_mem_size); - -#endif /* __ISERIES_SETUP_H__ */ diff --git a/arch/powerpc/platforms/iseries/smp.c b/arch/powerpc/platforms/iseries/smp.c deleted file mode 100644 index 02df49fb59f..00000000000 --- a/arch/powerpc/platforms/iseries/smp.c +++ /dev/null @@ -1,88 +0,0 @@ -/* - * SMP support for iSeries machines. - * - * Dave Engebretsen, Peter Bergner, and - * Mike Corrigan {engebret|bergner|mikec}@us.ibm.com - * - * Plus various changes from other IBM teams... - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#undef DEBUG - -#include <linux/kernel.h> -#include <linux/sched.h> -#include <linux/smp.h> -#include <linux/interrupt.h> -#include <linux/kernel_stat.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/cache.h> -#include <linux/err.h> -#include <linux/device.h> -#include <linux/cpu.h> - -#include <asm/ptrace.h> -#include <linux/atomic.h> -#include <asm/irq.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/paca.h> -#include <asm/iseries/hv_call.h> -#include <asm/time.h> -#include <asm/machdep.h> -#include <asm/cputable.h> -#include <asm/system.h> - -static void smp_iSeries_cause_ipi(int cpu, unsigned long data) -{ - HvCall_sendIPI(&(paca[cpu])); -} - -static int smp_iSeries_probe(void) -{ - return cpumask_weight(cpu_possible_mask); -} - -static int smp_iSeries_kick_cpu(int nr) -{ - BUG_ON((nr < 0) || (nr >= NR_CPUS)); - - /* Verify that our partition has a processor nr */ - if (lppaca_of(nr).dyn_proc_status >= 2) - return -ENOENT; - - /* The processor is currently spinning, waiting - * for the cpu_start field to become non-zero - * After we set cpu_start, the processor will - * continue on to secondary_start in iSeries_head.S - */ - paca[nr].cpu_start = 1; - - return 0; -} - -static void __devinit smp_iSeries_setup_cpu(int nr) -{ -} - -static struct smp_ops_t iSeries_smp_ops = { - .message_pass = NULL, /* Use smp_muxed_ipi_message_pass */ - .cause_ipi = smp_iSeries_cause_ipi, - .probe = smp_iSeries_probe, - .kick_cpu = smp_iSeries_kick_cpu, - .setup_cpu = smp_iSeries_setup_cpu, -}; - -/* This is called very early. */ -void __init smp_init_iSeries(void) -{ - smp_ops = &iSeries_smp_ops; -} diff --git a/arch/powerpc/platforms/iseries/spcomm_area.h b/arch/powerpc/platforms/iseries/spcomm_area.h deleted file mode 100644 index 598b7c14573..00000000000 --- a/arch/powerpc/platforms/iseries/spcomm_area.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef _ISERIES_SPCOMM_AREA_H -#define _ISERIES_SPCOMM_AREA_H - - -struct SpCommArea { - u32 xDesc; // Descriptor (only in new formats) 000-003 - u8 xFormat; // Format (only in new formats) 004-004 - u8 xRsvd1[11]; // Reserved 005-00F - u64 xRawTbAtIplStart; // Raw HW TB value when IPL is started 010-017 - u64 xRawTodAtIplStart; // Raw HW TOD value when IPL is started 018-01F - u64 xBcdTimeAtIplStart; // BCD time when IPL is started 020-027 - u64 xBcdTimeAtOsStart; // BCD time when OS passed control 028-02F - u8 xRsvd2[80]; // Reserved 030-07F -}; - -#endif /* _ISERIES_SPCOMM_AREA_H */ diff --git a/arch/powerpc/platforms/iseries/vio.c b/arch/powerpc/platforms/iseries/vio.c deleted file mode 100644 index 04be62d368a..00000000000 --- a/arch/powerpc/platforms/iseries/vio.c +++ /dev/null @@ -1,556 +0,0 @@ -/* - * Legacy iSeries specific vio initialisation - * that needs to be built in (not a module). - * - * © Copyright 2007 IBM Corporation - * Author: Stephen Rothwell - * Some parts collected from various other files - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include <linux/of.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/completion.h> -#include <linux/proc_fs.h> -#include <linux/export.h> - -#include <asm/firmware.h> -#include <asm/vio.h> -#include <asm/iseries/vio.h> -#include <asm/iseries/iommu.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_event.h> - -#define FIRST_VTY 0 -#define NUM_VTYS 1 -#define FIRST_VSCSI (FIRST_VTY + NUM_VTYS) -#define NUM_VSCSIS 1 -#define FIRST_VLAN (FIRST_VSCSI + NUM_VSCSIS) -#define NUM_VLANS HVMAXARCHITECTEDVIRTUALLANS -#define FIRST_VIODASD (FIRST_VLAN + NUM_VLANS) -#define NUM_VIODASDS HVMAXARCHITECTEDVIRTUALDISKS -#define FIRST_VIOCD (FIRST_VIODASD + NUM_VIODASDS) -#define NUM_VIOCDS HVMAXARCHITECTEDVIRTUALCDROMS -#define FIRST_VIOTAPE (FIRST_VIOCD + NUM_VIOCDS) -#define NUM_VIOTAPES HVMAXARCHITECTEDVIRTUALTAPES - -struct vio_waitevent { - struct completion com; - int rc; - u16 sub_result; -}; - -struct vio_resource { - char rsrcname[10]; - char type[4]; - char model[3]; -}; - -static struct property *new_property(const char *name, int length, - const void *value) -{ - struct property *np = kzalloc(sizeof(*np) + strlen(name) + 1 + length, - GFP_KERNEL); - - if (!np) - return NULL; - np->name = (char *)(np + 1); - np->value = np->name + strlen(name) + 1; - strcpy(np->name, name); - memcpy(np->value, value, length); - np->length = length; - return np; -} - -static void free_property(struct property *np) -{ - kfree(np); -} - -static struct device_node *new_node(const char *path, - struct device_node *parent) -{ - struct device_node *np = kzalloc(sizeof(*np), GFP_KERNEL); - - if (!np) - return NULL; - np->full_name = kstrdup(path, GFP_KERNEL); - if (!np->full_name) { - kfree(np); - return NULL; - } - of_node_set_flag(np, OF_DYNAMIC); - kref_init(&np->kref); - np->parent = of_node_get(parent); - return np; -} - -static void free_node(struct device_node *np) -{ - struct property *next; - struct property *prop; - - next = np->properties; - while (next) { - prop = next; - next = prop->next; - free_property(prop); - } - of_node_put(np->parent); - kfree(np->full_name); - kfree(np); -} - -static int add_string_property(struct device_node *np, const char *name, - const char *value) -{ - struct property *nprop = new_property(name, strlen(value) + 1, value); - - if (!nprop) - return 0; - prom_add_property(np, nprop); - return 1; -} - -static int add_raw_property(struct device_node *np, const char *name, - int length, const void *value) -{ - struct property *nprop = new_property(name, length, value); - - if (!nprop) - return 0; - prom_add_property(np, nprop); - return 1; -} - -static struct device_node *do_device_node(struct device_node *parent, - const char *name, u32 reg, u32 unit, const char *type, - const char *compat, struct vio_resource *res) -{ - struct device_node *np; - char path[32]; - - snprintf(path, sizeof(path), "/vdevice/%s@%08x", name, reg); - np = new_node(path, parent); - if (!np) - return NULL; - if (!add_string_property(np, "name", name) || - !add_string_property(np, "device_type", type) || - !add_string_property(np, "compatible", compat) || - !add_raw_property(np, "reg", sizeof(reg), ®) || - !add_raw_property(np, "linux,unit_address", - sizeof(unit), &unit)) { - goto node_free; - } - if (res) { - if (!add_raw_property(np, "linux,vio_rsrcname", - sizeof(res->rsrcname), res->rsrcname) || - !add_raw_property(np, "linux,vio_type", - sizeof(res->type), res->type) || - !add_raw_property(np, "linux,vio_model", - sizeof(res->model), res->model)) - goto node_free; - } - np->name = of_get_property(np, "name", NULL); - np->type = of_get_property(np, "device_type", NULL); - of_attach_node(np); -#ifdef CONFIG_PROC_DEVICETREE - if (parent->pde) { - struct proc_dir_entry *ent; - - ent = proc_mkdir(strrchr(np->full_name, '/') + 1, parent->pde); - if (ent) - proc_device_tree_add_node(np, ent); - } -#endif - return np; - - node_free: - free_node(np); - return NULL; -} - -/* - * This is here so that we can dynamically add viodasd - * devices without exposing all the above infrastructure. - */ -struct vio_dev *vio_create_viodasd(u32 unit) -{ - struct device_node *vio_root; - struct device_node *np; - struct vio_dev *vdev = NULL; - - vio_root = of_find_node_by_path("/vdevice"); - if (!vio_root) - return NULL; - np = do_device_node(vio_root, "viodasd", FIRST_VIODASD + unit, unit, - "block", "IBM,iSeries-viodasd", NULL); - of_node_put(vio_root); - if (np) { - vdev = vio_register_device_node(np); - if (!vdev) - free_node(np); - } - return vdev; -} -EXPORT_SYMBOL_GPL(vio_create_viodasd); - -static void __init handle_block_event(struct HvLpEvent *event) -{ - struct vioblocklpevent *bevent = (struct vioblocklpevent *)event; - struct vio_waitevent *pwe; - - if (event == NULL) - /* Notification that a partition went away! */ - return; - /* First, we should NEVER get an int here...only acks */ - if (hvlpevent_is_int(event)) { - printk(KERN_WARNING "handle_viod_request: " - "Yikes! got an int in viodasd event handler!\n"); - if (hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - return; - } - - switch (event->xSubtype & VIOMINOR_SUBTYPE_MASK) { - case vioblockopen: - /* - * Handle a response to an open request. We get all the - * disk information in the response, so update it. The - * correlation token contains a pointer to a waitevent - * structure that has a completion in it. update the - * return code in the waitevent structure and post the - * completion to wake up the guy who sent the request - */ - pwe = (struct vio_waitevent *)event->xCorrelationToken; - pwe->rc = event->xRc; - pwe->sub_result = bevent->sub_result; - complete(&pwe->com); - break; - case vioblockclose: - break; - default: - printk(KERN_WARNING "handle_viod_request: unexpected subtype!"); - if (hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - } -} - -static void __init probe_disk(struct device_node *vio_root, u32 unit) -{ - HvLpEvent_Rc hvrc; - struct vio_waitevent we; - u16 flags = 0; - -retry: - init_completion(&we.com); - - /* Send the open event to OS/400 */ - hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_blockio | vioblockopen, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(viopath_hostLp), - viopath_targetinst(viopath_hostLp), - (u64)(unsigned long)&we, VIOVERSION << 16, - ((u64)unit << 48) | ((u64)flags<< 32), - 0, 0, 0); - if (hvrc != 0) { - printk(KERN_WARNING "probe_disk: bad rc on HV open %d\n", - (int)hvrc); - return; - } - - wait_for_completion(&we.com); - - if (we.rc != 0) { - if (flags != 0) - return; - /* try again with read only flag set */ - flags = vioblockflags_ro; - goto retry; - } - - /* Send the close event to OS/400. We DON'T expect a response */ - hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_blockio | vioblockclose, - HvLpEvent_AckInd_NoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(viopath_hostLp), - viopath_targetinst(viopath_hostLp), - 0, VIOVERSION << 16, - ((u64)unit << 48) | ((u64)flags << 32), - 0, 0, 0); - if (hvrc != 0) { - printk(KERN_WARNING "probe_disk: " - "bad rc sending event to OS/400 %d\n", (int)hvrc); - return; - } - - do_device_node(vio_root, "viodasd", FIRST_VIODASD + unit, unit, - "block", "IBM,iSeries-viodasd", NULL); -} - -static void __init get_viodasd_info(struct device_node *vio_root) -{ - int rc; - u32 unit; - - rc = viopath_open(viopath_hostLp, viomajorsubtype_blockio, 2); - if (rc) { - printk(KERN_WARNING "get_viodasd_info: " - "error opening path to host partition %d\n", - viopath_hostLp); - return; - } - - /* Initialize our request handler */ - vio_setHandler(viomajorsubtype_blockio, handle_block_event); - - for (unit = 0; unit < HVMAXARCHITECTEDVIRTUALDISKS; unit++) - probe_disk(vio_root, unit); - - vio_clearHandler(viomajorsubtype_blockio); - viopath_close(viopath_hostLp, viomajorsubtype_blockio, 2); -} - -static void __init handle_cd_event(struct HvLpEvent *event) -{ - struct viocdlpevent *bevent; - struct vio_waitevent *pwe; - - if (!event) - /* Notification that a partition went away! */ - return; - - /* First, we should NEVER get an int here...only acks */ - if (hvlpevent_is_int(event)) { - printk(KERN_WARNING "handle_cd_event: got an unexpected int\n"); - if (hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - return; - } - - bevent = (struct viocdlpevent *)event; - - switch (event->xSubtype & VIOMINOR_SUBTYPE_MASK) { - case viocdgetinfo: - pwe = (struct vio_waitevent *)event->xCorrelationToken; - pwe->rc = event->xRc; - pwe->sub_result = bevent->sub_result; - complete(&pwe->com); - break; - - default: - printk(KERN_WARNING "handle_cd_event: " - "message with unexpected subtype %0x04X!\n", - event->xSubtype & VIOMINOR_SUBTYPE_MASK); - if (hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - } -} - -static void __init get_viocd_info(struct device_node *vio_root) -{ - HvLpEvent_Rc hvrc; - u32 unit; - struct vio_waitevent we; - struct vio_resource *unitinfo; - dma_addr_t unitinfo_dmaaddr; - int ret; - - ret = viopath_open(viopath_hostLp, viomajorsubtype_cdio, 2); - if (ret) { - printk(KERN_WARNING - "get_viocd_info: error opening path to host partition %d\n", - viopath_hostLp); - return; - } - - /* Initialize our request handler */ - vio_setHandler(viomajorsubtype_cdio, handle_cd_event); - - unitinfo = iseries_hv_alloc( - sizeof(*unitinfo) * HVMAXARCHITECTEDVIRTUALCDROMS, - &unitinfo_dmaaddr, GFP_ATOMIC); - if (!unitinfo) { - printk(KERN_WARNING - "get_viocd_info: error allocating unitinfo\n"); - goto clear_handler; - } - - memset(unitinfo, 0, sizeof(*unitinfo) * HVMAXARCHITECTEDVIRTUALCDROMS); - - init_completion(&we.com); - - hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_cdio | viocdgetinfo, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(viopath_hostLp), - viopath_targetinst(viopath_hostLp), - (u64)&we, VIOVERSION << 16, unitinfo_dmaaddr, 0, - sizeof(*unitinfo) * HVMAXARCHITECTEDVIRTUALCDROMS, 0); - if (hvrc != HvLpEvent_Rc_Good) { - printk(KERN_WARNING - "get_viocd_info: cdrom error sending event. rc %d\n", - (int)hvrc); - goto hv_free; - } - - wait_for_completion(&we.com); - - if (we.rc) { - printk(KERN_WARNING "get_viocd_info: bad rc %d:0x%04X\n", - we.rc, we.sub_result); - goto hv_free; - } - - for (unit = 0; (unit < HVMAXARCHITECTEDVIRTUALCDROMS) && - unitinfo[unit].rsrcname[0]; unit++) { - if (!do_device_node(vio_root, "viocd", FIRST_VIOCD + unit, unit, - "block", "IBM,iSeries-viocd", &unitinfo[unit])) - break; - } - - hv_free: - iseries_hv_free(sizeof(*unitinfo) * HVMAXARCHITECTEDVIRTUALCDROMS, - unitinfo, unitinfo_dmaaddr); - clear_handler: - vio_clearHandler(viomajorsubtype_cdio); - viopath_close(viopath_hostLp, viomajorsubtype_cdio, 2); -} - -/* Handle interrupt events for tape */ -static void __init handle_tape_event(struct HvLpEvent *event) -{ - struct vio_waitevent *we; - struct viotapelpevent *tevent = (struct viotapelpevent *)event; - - if (event == NULL) - /* Notification that a partition went away! */ - return; - - we = (struct vio_waitevent *)event->xCorrelationToken; - switch (event->xSubtype & VIOMINOR_SUBTYPE_MASK) { - case viotapegetinfo: - we->rc = tevent->sub_type_result; - complete(&we->com); - break; - default: - printk(KERN_WARNING "handle_tape_event: weird ack\n"); - } -} - -static void __init get_viotape_info(struct device_node *vio_root) -{ - HvLpEvent_Rc hvrc; - u32 unit; - struct vio_resource *unitinfo; - dma_addr_t unitinfo_dmaaddr; - size_t len = sizeof(*unitinfo) * HVMAXARCHITECTEDVIRTUALTAPES; - struct vio_waitevent we; - int ret; - - init_completion(&we.com); - - ret = viopath_open(viopath_hostLp, viomajorsubtype_tape, 2); - if (ret) { - printk(KERN_WARNING "get_viotape_info: " - "error on viopath_open to hostlp %d\n", ret); - return; - } - - vio_setHandler(viomajorsubtype_tape, handle_tape_event); - - unitinfo = iseries_hv_alloc(len, &unitinfo_dmaaddr, GFP_ATOMIC); - if (!unitinfo) - goto clear_handler; - - memset(unitinfo, 0, len); - - hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_tape | viotapegetinfo, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(viopath_hostLp), - viopath_targetinst(viopath_hostLp), - (u64)(unsigned long)&we, VIOVERSION << 16, - unitinfo_dmaaddr, len, 0, 0); - if (hvrc != HvLpEvent_Rc_Good) { - printk(KERN_WARNING "get_viotape_info: hv error on op %d\n", - (int)hvrc); - goto hv_free; - } - - wait_for_completion(&we.com); - - for (unit = 0; (unit < HVMAXARCHITECTEDVIRTUALTAPES) && - unitinfo[unit].rsrcname[0]; unit++) { - if (!do_device_node(vio_root, "viotape", FIRST_VIOTAPE + unit, - unit, "byte", "IBM,iSeries-viotape", - &unitinfo[unit])) - break; - } - - hv_free: - iseries_hv_free(len, unitinfo, unitinfo_dmaaddr); - clear_handler: - vio_clearHandler(viomajorsubtype_tape); - viopath_close(viopath_hostLp, viomajorsubtype_tape, 2); -} - -static int __init iseries_vio_init(void) -{ - struct device_node *vio_root; - int ret = -ENODEV; - - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - goto out; - - iommu_vio_init(); - - vio_root = of_find_node_by_path("/vdevice"); - if (!vio_root) - goto out; - - if (viopath_hostLp == HvLpIndexInvalid) { - vio_set_hostlp(); - /* If we don't have a host, bail out */ - if (viopath_hostLp == HvLpIndexInvalid) - goto put_node; - } - - get_viodasd_info(vio_root); - get_viocd_info(vio_root); - get_viotape_info(vio_root); - - ret = 0; - - put_node: - of_node_put(vio_root); - out: - return ret; -} -arch_initcall(iseries_vio_init); diff --git a/arch/powerpc/platforms/iseries/viopath.c b/arch/powerpc/platforms/iseries/viopath.c deleted file mode 100644 index 40dad0840eb..00000000000 --- a/arch/powerpc/platforms/iseries/viopath.c +++ /dev/null @@ -1,677 +0,0 @@ -/* -*- linux-c -*- - * - * iSeries Virtual I/O Message Path code - * - * Authors: Dave Boutcher <boutcher@us.ibm.com> - * Ryan Arnold <ryanarn@us.ibm.com> - * Colin Devilbiss <devilbis@us.ibm.com> - * - * (C) Copyright 2000-2005 IBM Corporation - * - * This code is used by the iSeries virtual disk, cd, - * tape, and console to communicate with OS/400 in another - * partition. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of the - * License, or (at your option) anyu later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software Foundation, - * Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ -#include <linux/export.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/errno.h> -#include <linux/vmalloc.h> -#include <linux/string.h> -#include <linux/proc_fs.h> -#include <linux/dma-mapping.h> -#include <linux/wait.h> -#include <linux/seq_file.h> -#include <linux/interrupt.h> -#include <linux/completion.h> - -#include <asm/system.h> -#include <asm/uaccess.h> -#include <asm/prom.h> -#include <asm/firmware.h> -#include <asm/iseries/hv_types.h> -#include <asm/iseries/hv_lp_event.h> -#include <asm/iseries/hv_lp_config.h> -#include <asm/iseries/mf.h> -#include <asm/iseries/vio.h> - -/* Status of the path to each other partition in the system. - * This is overkill, since we will only ever establish connections - * to our hosting partition and the primary partition on the system. - * But this allows for other support in the future. - */ -static struct viopathStatus { - int isOpen; /* Did we open the path? */ - int isActive; /* Do we have a mon msg outstanding */ - int users[VIO_MAX_SUBTYPES]; - HvLpInstanceId mSourceInst; - HvLpInstanceId mTargetInst; - int numberAllocated; -} viopathStatus[HVMAXARCHITECTEDLPS]; - -static DEFINE_SPINLOCK(statuslock); - -/* - * For each kind of event we allocate a buffer that is - * guaranteed not to cross a page boundary - */ -static unsigned char event_buffer[VIO_MAX_SUBTYPES * 256] - __attribute__((__aligned__(4096))); -static atomic_t event_buffer_available[VIO_MAX_SUBTYPES]; -static int event_buffer_initialised; - -static void handleMonitorEvent(struct HvLpEvent *event); - -/* - * We use this structure to handle asynchronous responses. The caller - * blocks on the semaphore and the handler posts the semaphore. However, - * if system_state is not SYSTEM_RUNNING, then wait_atomic is used ... - */ -struct alloc_parms { - struct completion done; - int number; - atomic_t wait_atomic; - int used_wait_atomic; -}; - -/* Put a sequence number in each mon msg. The value is not - * important. Start at something other than 0 just for - * readability. wrapping this is ok. - */ -static u8 viomonseq = 22; - -/* Our hosting logical partition. We get this at startup - * time, and different modules access this variable directly. - */ -HvLpIndex viopath_hostLp = HvLpIndexInvalid; -EXPORT_SYMBOL(viopath_hostLp); -HvLpIndex viopath_ourLp = HvLpIndexInvalid; -EXPORT_SYMBOL(viopath_ourLp); - -/* For each kind of incoming event we set a pointer to a - * routine to call. - */ -static vio_event_handler_t *vio_handler[VIO_MAX_SUBTYPES]; - -#define VIOPATH_KERN_WARN KERN_WARNING "viopath: " -#define VIOPATH_KERN_INFO KERN_INFO "viopath: " - -static int proc_viopath_show(struct seq_file *m, void *v) -{ - char *buf; - u16 vlanMap; - dma_addr_t handle; - HvLpEvent_Rc hvrc; - DECLARE_COMPLETION_ONSTACK(done); - struct device_node *node; - const char *sysid; - - buf = kzalloc(HW_PAGE_SIZE, GFP_KERNEL); - if (!buf) - return 0; - - handle = iseries_hv_map(buf, HW_PAGE_SIZE, DMA_FROM_DEVICE); - - hvrc = HvCallEvent_signalLpEventFast(viopath_hostLp, - HvLpEvent_Type_VirtualIo, - viomajorsubtype_config | vioconfigget, - HvLpEvent_AckInd_DoAck, HvLpEvent_AckType_ImmediateAck, - viopath_sourceinst(viopath_hostLp), - viopath_targetinst(viopath_hostLp), - (u64)(unsigned long)&done, VIOVERSION << 16, - ((u64)handle) << 32, HW_PAGE_SIZE, 0, 0); - - if (hvrc != HvLpEvent_Rc_Good) - printk(VIOPATH_KERN_WARN "hv error on op %d\n", (int)hvrc); - - wait_for_completion(&done); - - vlanMap = HvLpConfig_getVirtualLanIndexMap(); - - buf[HW_PAGE_SIZE-1] = '\0'; - seq_printf(m, "%s", buf); - - iseries_hv_unmap(handle, HW_PAGE_SIZE, DMA_FROM_DEVICE); - kfree(buf); - - seq_printf(m, "AVAILABLE_VETH=%x\n", vlanMap); - - node = of_find_node_by_path("/"); - sysid = NULL; - if (node != NULL) - sysid = of_get_property(node, "system-id", NULL); - - if (sysid == NULL) - seq_printf(m, "SRLNBR=<UNKNOWN>\n"); - else - /* Skip "IBM," on front of serial number, see dt.c */ - seq_printf(m, "SRLNBR=%s\n", sysid + 4); - - of_node_put(node); - - return 0; -} - -static int proc_viopath_open(struct inode *inode, struct file *file) -{ - return single_open(file, proc_viopath_show, NULL); -} - -static const struct file_operations proc_viopath_operations = { - .open = proc_viopath_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init vio_proc_init(void) -{ - if (!firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; - - proc_create("iSeries/config", 0, NULL, &proc_viopath_operations); - return 0; -} -__initcall(vio_proc_init); - -/* See if a given LP is active. Allow for invalid lps to be passed in - * and just return invalid - */ -int viopath_isactive(HvLpIndex lp) -{ - if (lp == HvLpIndexInvalid) - return 0; - if (lp < HVMAXARCHITECTEDLPS) - return viopathStatus[lp].isActive; - else - return 0; -} -EXPORT_SYMBOL(viopath_isactive); - -/* - * We cache the source and target instance ids for each - * partition. - */ -HvLpInstanceId viopath_sourceinst(HvLpIndex lp) -{ - return viopathStatus[lp].mSourceInst; -} -EXPORT_SYMBOL(viopath_sourceinst); - -HvLpInstanceId viopath_targetinst(HvLpIndex lp) -{ - return viopathStatus[lp].mTargetInst; -} -EXPORT_SYMBOL(viopath_targetinst); - -/* - * Send a monitor message. This is a message with the acknowledge - * bit on that the other side will NOT explicitly acknowledge. When - * the other side goes down, the hypervisor will acknowledge any - * outstanding messages....so we will know when the other side dies. - */ -static void sendMonMsg(HvLpIndex remoteLp) -{ - HvLpEvent_Rc hvrc; - - viopathStatus[remoteLp].mSourceInst = - HvCallEvent_getSourceLpInstanceId(remoteLp, - HvLpEvent_Type_VirtualIo); - viopathStatus[remoteLp].mTargetInst = - HvCallEvent_getTargetLpInstanceId(remoteLp, - HvLpEvent_Type_VirtualIo); - - /* - * Deliberately ignore the return code here. if we call this - * more than once, we don't care. - */ - vio_setHandler(viomajorsubtype_monitor, handleMonitorEvent); - - hvrc = HvCallEvent_signalLpEventFast(remoteLp, HvLpEvent_Type_VirtualIo, - viomajorsubtype_monitor, HvLpEvent_AckInd_DoAck, - HvLpEvent_AckType_DeferredAck, - viopathStatus[remoteLp].mSourceInst, - viopathStatus[remoteLp].mTargetInst, - viomonseq++, 0, 0, 0, 0, 0); - - if (hvrc == HvLpEvent_Rc_Good) - viopathStatus[remoteLp].isActive = 1; - else { - printk(VIOPATH_KERN_WARN "could not connect to partition %d\n", - remoteLp); - viopathStatus[remoteLp].isActive = 0; - } -} - -static void handleMonitorEvent(struct HvLpEvent *event) -{ - HvLpIndex remoteLp; - int i; - - /* - * This handler is _also_ called as part of the loop - * at the end of this routine, so it must be able to - * ignore NULL events... - */ - if (!event) - return; - - /* - * First see if this is just a normal monitor message from the - * other partition - */ - if (hvlpevent_is_int(event)) { - remoteLp = event->xSourceLp; - if (!viopathStatus[remoteLp].isActive) - sendMonMsg(remoteLp); - return; - } - - /* - * This path is for an acknowledgement; the other partition - * died - */ - remoteLp = event->xTargetLp; - if ((event->xSourceInstanceId != viopathStatus[remoteLp].mSourceInst) || - (event->xTargetInstanceId != viopathStatus[remoteLp].mTargetInst)) { - printk(VIOPATH_KERN_WARN "ignoring ack....mismatched instances\n"); - return; - } - - printk(VIOPATH_KERN_WARN "partition %d ended\n", remoteLp); - - viopathStatus[remoteLp].isActive = 0; - - /* - * For each active handler, pass them a NULL - * message to indicate that the other partition - * died - */ - for (i = 0; i < VIO_MAX_SUBTYPES; i++) { - if (vio_handler[i] != NULL) - (*vio_handler[i])(NULL); - } -} - -int vio_setHandler(int subtype, vio_event_handler_t *beh) -{ - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) - return -EINVAL; - if (vio_handler[subtype] != NULL) - return -EBUSY; - vio_handler[subtype] = beh; - return 0; -} -EXPORT_SYMBOL(vio_setHandler); - -int vio_clearHandler(int subtype) -{ - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) - return -EINVAL; - if (vio_handler[subtype] == NULL) - return -EAGAIN; - vio_handler[subtype] = NULL; - return 0; -} -EXPORT_SYMBOL(vio_clearHandler); - -static void handleConfig(struct HvLpEvent *event) -{ - if (!event) - return; - if (hvlpevent_is_int(event)) { - printk(VIOPATH_KERN_WARN - "unexpected config request from partition %d", - event->xSourceLp); - - if (hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - return; - } - - complete((struct completion *)event->xCorrelationToken); -} - -/* - * Initialization of the hosting partition - */ -void vio_set_hostlp(void) -{ - /* - * If this has already been set then we DON'T want to either change - * it or re-register the proc file system - */ - if (viopath_hostLp != HvLpIndexInvalid) - return; - - /* - * Figure out our hosting partition. This isn't allowed to change - * while we're active - */ - viopath_ourLp = HvLpConfig_getLpIndex(); - viopath_hostLp = HvLpConfig_getHostingLpIndex(viopath_ourLp); - - if (viopath_hostLp != HvLpIndexInvalid) - vio_setHandler(viomajorsubtype_config, handleConfig); -} -EXPORT_SYMBOL(vio_set_hostlp); - -static void vio_handleEvent(struct HvLpEvent *event) -{ - HvLpIndex remoteLp; - int subtype = (event->xSubtype & VIOMAJOR_SUBTYPE_MASK) - >> VIOMAJOR_SUBTYPE_SHIFT; - - if (hvlpevent_is_int(event)) { - remoteLp = event->xSourceLp; - /* - * The isActive is checked because if the hosting partition - * went down and came back up it would not be active but it - * would have different source and target instances, in which - * case we'd want to reset them. This case really protects - * against an unauthorized active partition sending interrupts - * or acks to this linux partition. - */ - if (viopathStatus[remoteLp].isActive - && (event->xSourceInstanceId != - viopathStatus[remoteLp].mTargetInst)) { - printk(VIOPATH_KERN_WARN - "message from invalid partition. " - "int msg rcvd, source inst (%d) doesn't match (%d)\n", - viopathStatus[remoteLp].mTargetInst, - event->xSourceInstanceId); - return; - } - - if (viopathStatus[remoteLp].isActive - && (event->xTargetInstanceId != - viopathStatus[remoteLp].mSourceInst)) { - printk(VIOPATH_KERN_WARN - "message from invalid partition. " - "int msg rcvd, target inst (%d) doesn't match (%d)\n", - viopathStatus[remoteLp].mSourceInst, - event->xTargetInstanceId); - return; - } - } else { - remoteLp = event->xTargetLp; - if (event->xSourceInstanceId != - viopathStatus[remoteLp].mSourceInst) { - printk(VIOPATH_KERN_WARN - "message from invalid partition. " - "ack msg rcvd, source inst (%d) doesn't match (%d)\n", - viopathStatus[remoteLp].mSourceInst, - event->xSourceInstanceId); - return; - } - - if (event->xTargetInstanceId != - viopathStatus[remoteLp].mTargetInst) { - printk(VIOPATH_KERN_WARN - "message from invalid partition. " - "viopath: ack msg rcvd, target inst (%d) doesn't match (%d)\n", - viopathStatus[remoteLp].mTargetInst, - event->xTargetInstanceId); - return; - } - } - - if (vio_handler[subtype] == NULL) { - printk(VIOPATH_KERN_WARN - "unexpected virtual io event subtype %d from partition %d\n", - event->xSubtype, remoteLp); - /* No handler. Ack if necessary */ - if (hvlpevent_is_int(event) && hvlpevent_need_ack(event)) { - event->xRc = HvLpEvent_Rc_InvalidSubtype; - HvCallEvent_ackLpEvent(event); - } - return; - } - - /* This innocuous little line is where all the real work happens */ - (*vio_handler[subtype])(event); -} - -static void viopath_donealloc(void *parm, int number) -{ - struct alloc_parms *parmsp = parm; - - parmsp->number = number; - if (parmsp->used_wait_atomic) - atomic_set(&parmsp->wait_atomic, 0); - else - complete(&parmsp->done); -} - -static int allocateEvents(HvLpIndex remoteLp, int numEvents) -{ - struct alloc_parms parms; - - if (system_state != SYSTEM_RUNNING) { - parms.used_wait_atomic = 1; - atomic_set(&parms.wait_atomic, 1); - } else { - parms.used_wait_atomic = 0; - init_completion(&parms.done); - } - mf_allocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, 250, /* It would be nice to put a real number here! */ - numEvents, &viopath_donealloc, &parms); - if (system_state != SYSTEM_RUNNING) { - while (atomic_read(&parms.wait_atomic)) - mb(); - } else - wait_for_completion(&parms.done); - return parms.number; -} - -int viopath_open(HvLpIndex remoteLp, int subtype, int numReq) -{ - int i; - unsigned long flags; - int tempNumAllocated; - - if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) - return -EINVAL; - - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) - return -EINVAL; - - spin_lock_irqsave(&statuslock, flags); - - if (!event_buffer_initialised) { - for (i = 0; i < VIO_MAX_SUBTYPES; i++) - atomic_set(&event_buffer_available[i], 1); - event_buffer_initialised = 1; - } - - viopathStatus[remoteLp].users[subtype]++; - - if (!viopathStatus[remoteLp].isOpen) { - viopathStatus[remoteLp].isOpen = 1; - HvCallEvent_openLpEventPath(remoteLp, HvLpEvent_Type_VirtualIo); - - /* - * Don't hold the spinlock during an operation that - * can sleep. - */ - spin_unlock_irqrestore(&statuslock, flags); - tempNumAllocated = allocateEvents(remoteLp, 1); - spin_lock_irqsave(&statuslock, flags); - - viopathStatus[remoteLp].numberAllocated += tempNumAllocated; - - if (viopathStatus[remoteLp].numberAllocated == 0) { - HvCallEvent_closeLpEventPath(remoteLp, - HvLpEvent_Type_VirtualIo); - - spin_unlock_irqrestore(&statuslock, flags); - return -ENOMEM; - } - - viopathStatus[remoteLp].mSourceInst = - HvCallEvent_getSourceLpInstanceId(remoteLp, - HvLpEvent_Type_VirtualIo); - viopathStatus[remoteLp].mTargetInst = - HvCallEvent_getTargetLpInstanceId(remoteLp, - HvLpEvent_Type_VirtualIo); - HvLpEvent_registerHandler(HvLpEvent_Type_VirtualIo, - &vio_handleEvent); - sendMonMsg(remoteLp); - printk(VIOPATH_KERN_INFO "opening connection to partition %d, " - "setting sinst %d, tinst %d\n", - remoteLp, viopathStatus[remoteLp].mSourceInst, - viopathStatus[remoteLp].mTargetInst); - } - - spin_unlock_irqrestore(&statuslock, flags); - tempNumAllocated = allocateEvents(remoteLp, numReq); - spin_lock_irqsave(&statuslock, flags); - viopathStatus[remoteLp].numberAllocated += tempNumAllocated; - spin_unlock_irqrestore(&statuslock, flags); - - return 0; -} -EXPORT_SYMBOL(viopath_open); - -int viopath_close(HvLpIndex remoteLp, int subtype, int numReq) -{ - unsigned long flags; - int i; - int numOpen; - struct alloc_parms parms; - - if ((remoteLp >= HVMAXARCHITECTEDLPS) || (remoteLp == HvLpIndexInvalid)) - return -EINVAL; - - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) - return -EINVAL; - - spin_lock_irqsave(&statuslock, flags); - /* - * If the viopath_close somehow gets called before a - * viopath_open it could decrement to -1 which is a non - * recoverable state so we'll prevent this from - * happening. - */ - if (viopathStatus[remoteLp].users[subtype] > 0) - viopathStatus[remoteLp].users[subtype]--; - - spin_unlock_irqrestore(&statuslock, flags); - - parms.used_wait_atomic = 0; - init_completion(&parms.done); - mf_deallocate_lp_events(remoteLp, HvLpEvent_Type_VirtualIo, - numReq, &viopath_donealloc, &parms); - wait_for_completion(&parms.done); - - spin_lock_irqsave(&statuslock, flags); - for (i = 0, numOpen = 0; i < VIO_MAX_SUBTYPES; i++) - numOpen += viopathStatus[remoteLp].users[i]; - - if ((viopathStatus[remoteLp].isOpen) && (numOpen == 0)) { - printk(VIOPATH_KERN_INFO "closing connection to partition %d\n", - remoteLp); - - HvCallEvent_closeLpEventPath(remoteLp, - HvLpEvent_Type_VirtualIo); - viopathStatus[remoteLp].isOpen = 0; - viopathStatus[remoteLp].isActive = 0; - - for (i = 0; i < VIO_MAX_SUBTYPES; i++) - atomic_set(&event_buffer_available[i], 0); - event_buffer_initialised = 0; - } - spin_unlock_irqrestore(&statuslock, flags); - return 0; -} -EXPORT_SYMBOL(viopath_close); - -void *vio_get_event_buffer(int subtype) -{ - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) - return NULL; - - if (atomic_dec_if_positive(&event_buffer_available[subtype]) == 0) - return &event_buffer[subtype * 256]; - else - return NULL; -} -EXPORT_SYMBOL(vio_get_event_buffer); - -void vio_free_event_buffer(int subtype, void *buffer) -{ - subtype = subtype >> VIOMAJOR_SUBTYPE_SHIFT; - if ((subtype < 0) || (subtype >= VIO_MAX_SUBTYPES)) { - printk(VIOPATH_KERN_WARN - "unexpected subtype %d freeing event buffer\n", subtype); - return; - } - - if (atomic_read(&event_buffer_available[subtype]) != 0) { - printk(VIOPATH_KERN_WARN - "freeing unallocated event buffer, subtype %d\n", - subtype); - return; - } - - if (buffer != &event_buffer[subtype * 256]) { - printk(VIOPATH_KERN_WARN - "freeing invalid event buffer, subtype %d\n", subtype); - } - - atomic_set(&event_buffer_available[subtype], 1); -} -EXPORT_SYMBOL(vio_free_event_buffer); - -static const struct vio_error_entry vio_no_error = - { 0, 0, "Non-VIO Error" }; -static const struct vio_error_entry vio_unknown_error = - { 0, EIO, "Unknown Error" }; - -static const struct vio_error_entry vio_default_errors[] = { - {0x0001, EIO, "No Connection"}, - {0x0002, EIO, "No Receiver"}, - {0x0003, EIO, "No Buffer Available"}, - {0x0004, EBADRQC, "Invalid Message Type"}, - {0x0000, 0, NULL}, -}; - -const struct vio_error_entry *vio_lookup_rc( - const struct vio_error_entry *local_table, u16 rc) -{ - const struct vio_error_entry *cur; - - if (!rc) - return &vio_no_error; - if (local_table) - for (cur = local_table; cur->rc; ++cur) - if (cur->rc == rc) - return cur; - for (cur = vio_default_errors; cur->rc; ++cur) - if (cur->rc == rc) - return cur; - return &vio_unknown_error; -} -EXPORT_SYMBOL(vio_lookup_rc); diff --git a/arch/powerpc/platforms/iseries/vpd_areas.h b/arch/powerpc/platforms/iseries/vpd_areas.h deleted file mode 100644 index feb001f3a5f..00000000000 --- a/arch/powerpc/platforms/iseries/vpd_areas.h +++ /dev/null @@ -1,88 +0,0 @@ -/* - * Copyright (C) 2001 Mike Corrigan IBM Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef _ISERIES_VPD_AREAS_H -#define _ISERIES_VPD_AREAS_H - -/* - * This file defines the address and length of all of the VPD area passed to - * the OS from PLIC (most of which start from the SP). - */ - -#include <asm/types.h> - -/* VPD Entry index is carved in stone - cannot be changed (easily). */ -#define ItVpdCecVpd 0 -#define ItVpdDynamicSpace 1 -#define ItVpdExtVpd 2 -#define ItVpdExtVpdOnPanel 3 -#define ItVpdFirstPaca 4 -#define ItVpdIoVpd 5 -#define ItVpdIplParms 6 -#define ItVpdMsVpd 7 -#define ItVpdPanelVpd 8 -#define ItVpdLpNaca 9 -#define ItVpdBackplaneAndMaybeClockCardVpd 10 -#define ItVpdRecoveryLogBuffer 11 -#define ItVpdSpCommArea 12 -#define ItVpdSpLogBuffer 13 -#define ItVpdSpLogBufferSave 14 -#define ItVpdSpCardVpd 15 -#define ItVpdFirstProcVpd 16 -#define ItVpdApModelVpd 17 -#define ItVpdClockCardVpd 18 -#define ItVpdBusExtCardVpd 19 -#define ItVpdProcCapacityVpd 20 -#define ItVpdInteractiveCapacityVpd 21 -#define ItVpdFirstSlotLabel 22 -#define ItVpdFirstLpQueue 23 -#define ItVpdFirstL3CacheVpd 24 -#define ItVpdFirstProcFruVpd 25 - -#define ItVpdMaxEntries 26 - -#define ItDmaMaxEntries 10 - -#define ItVpdAreasMaxSlotLabels 192 - - -struct ItVpdAreas { - u32 xSlicDesc; // Descriptor 000-003 - u16 xSlicSize; // Size of this control block 004-005 - u16 xPlicAdjustVpdLens:1; // Flag to indicate new interface006-007 - u16 xRsvd1:15; // Reserved bits ... - u16 xSlicVpdEntries; // Number of VPD entries 008-009 - u16 xSlicDmaEntries; // Number of DMA entries 00A-00B - u16 xSlicMaxLogicalProcs; // Maximum logical processors 00C-00D - u16 xSlicMaxPhysicalProcs; // Maximum physical processors 00E-00F - u16 xSlicDmaToksOffset; // Offset into this of array 010-011 - u16 xSlicVpdAdrsOffset; // Offset into this of array 012-013 - u16 xSlicDmaLensOffset; // Offset into this of array 014-015 - u16 xSlicVpdLensOffset; // Offset into this of array 016-017 - u16 xSlicMaxSlotLabels; // Maximum number of slot labels018-019 - u16 xSlicMaxLpQueues; // Maximum number of LP Queues 01A-01B - u8 xRsvd2[4]; // Reserved 01C-01F - u64 xRsvd3[12]; // Reserved 020-07F - u32 xPlicDmaLens[ItDmaMaxEntries];// Array of DMA lengths 080-0A7 - u32 xPlicDmaToks[ItDmaMaxEntries];// Array of DMA tokens 0A8-0CF - u32 xSlicVpdLens[ItVpdMaxEntries];// Array of VPD lengths 0D0-12F - const void *xSlicVpdAdrs[ItVpdMaxEntries];// Array of VPD buffers 130-1EF -}; - -extern const struct ItVpdAreas itVpdAreas; - -#endif /* _ISERIES_VPD_AREAS_H */ diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c index 0bcbfe7b2c5..3b7545a51aa 100644 --- a/arch/powerpc/platforms/maple/setup.c +++ b/arch/powerpc/platforms/maple/setup.c @@ -262,7 +262,7 @@ static void __init maple_init_IRQ(void) flags |= MPIC_BIG_ENDIAN; /* XXX Maple specific bits */ - flags |= MPIC_U3_HT_IRQS | MPIC_WANTS_RESET; + flags |= MPIC_U3_HT_IRQS; /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */ flags |= MPIC_BIG_ENDIAN; diff --git a/arch/powerpc/platforms/pasemi/setup.c b/arch/powerpc/platforms/pasemi/setup.c index 98b7a7c1317..e777ad471a4 100644 --- a/arch/powerpc/platforms/pasemi/setup.c +++ b/arch/powerpc/platforms/pasemi/setup.c @@ -224,7 +224,7 @@ static __init void pas_init_IRQ(void) openpic_addr = of_read_number(opprop, naddr); printk(KERN_DEBUG "OpenPIC addr: %lx\n", openpic_addr); - mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS; + mpic_flags = MPIC_LARGE_VECTORS | MPIC_NO_BIAS | MPIC_NO_RESET; nmiprop = of_get_property(mpic_node, "nmi-source", NULL); if (nmiprop) diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index 54d227127c9..da18b26dcc6 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -279,7 +279,7 @@ static u32 core99_check(u8* datas) static int sm_erase_bank(int bank) { - int stat, i; + int stat; unsigned long timeout; u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; @@ -301,11 +301,10 @@ static int sm_erase_bank(int bank) out_8(base, SM_FLASH_CMD_CLEAR_STATUS); out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != 0xff) { - printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); - return -ENXIO; - } + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n"); + return -ENXIO; + } return 0; } @@ -336,17 +335,16 @@ static int sm_write_bank(int bank, u8* datas) } out_8(base, SM_FLASH_CMD_CLEAR_STATUS); out_8(base, SM_FLASH_CMD_RESET); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != datas[i]) { - printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); - return -ENXIO; - } + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n"); + return -ENXIO; + } return 0; } static int amd_erase_bank(int bank) { - int i, stat = 0; + int stat = 0; unsigned long timeout; u8 __iomem *base = (u8 __iomem *)nvram_data + core99_bank*NVRAM_SIZE; @@ -382,12 +380,11 @@ static int amd_erase_bank(int bank) /* Reset */ out_8(base, 0xf0); udelay(1); - - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != 0xff) { - printk(KERN_ERR "nvram: AMD flash erase failed !\n"); - return -ENXIO; - } + + if (memchr_inv(base, 0xff, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash erase failed !\n"); + return -ENXIO; + } return 0; } @@ -429,11 +426,10 @@ static int amd_write_bank(int bank, u8* datas) out_8(base, 0xf0); udelay(1); - for (i=0; i<NVRAM_SIZE; i++) - if (base[i] != datas[i]) { - printk(KERN_ERR "nvram: AMD flash write failed !\n"); - return -ENXIO; - } + if (memcmp(base, datas, NVRAM_SIZE)) { + printk(KERN_ERR "nvram: AMD flash write failed !\n"); + return -ENXIO; + } return 0; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 92afc382a49..66ad93de1d5 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -457,7 +457,6 @@ static struct mpic * __init pmac_setup_one_mpic(struct device_node *np, pmac_call_feature(PMAC_FTR_ENABLE_MPIC, np, 0, 0); - flags |= MPIC_WANTS_RESET; if (of_get_property(np, "big-endian", NULL)) flags |= MPIC_BIG_ENDIAN; diff --git a/arch/powerpc/platforms/powernv/pci.c b/arch/powerpc/platforms/powernv/pci.c index f92b9ef7340..214478d781a 100644 --- a/arch/powerpc/platforms/powernv/pci.c +++ b/arch/powerpc/platforms/powernv/pci.c @@ -31,6 +31,7 @@ #include <asm/iommu.h> #include <asm/tce.h> #include <asm/abs_addr.h> +#include <asm/firmware.h> #include "powernv.h" #include "pci.h" diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 467bd4ac682..db1ad1c8f68 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -31,7 +31,6 @@ #include <asm/xics.h> #include <asm/rtas.h> #include <asm/opal.h> -#include <asm/xics.h> #include "powernv.h" diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index f2556257bbd..aadbe4f6d53 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -73,7 +73,7 @@ config IO_EVENT_IRQ config LPARCFG bool "LPAR Configuration Data" - depends on PPC_PSERIES || PPC_ISERIES + depends on PPC_PSERIES help Provide system capacity information via human readable <key word>=<value> pairs through a /proc/ppc64/lparcfg interface. diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile index 236db46b407..c222189f5bb 100644 --- a/arch/powerpc/platforms/pseries/Makefile +++ b/arch/powerpc/platforms/pseries/Makefile @@ -6,7 +6,8 @@ obj-y := lpar.o hvCall.o nvram.o reconfig.o \ firmware.o power.o dlpar.o mobility.o obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SCANLOG) += scanlog.o -obj-$(CONFIG_EEH) += eeh.o eeh_cache.o eeh_driver.o eeh_event.o eeh_sysfs.o +obj-$(CONFIG_EEH) += eeh.o eeh_dev.o eeh_cache.o eeh_driver.o \ + eeh_event.o eeh_sysfs.o eeh_pseries.o obj-$(CONFIG_KEXEC) += kexec.o obj-$(CONFIG_PCI) += pci.o pci_dlpar.o obj-$(CONFIG_PSERIES_MSI) += msi.o @@ -18,7 +19,6 @@ obj-$(CONFIG_MEMORY_HOTPLUG) += hotplug-memory.o obj-$(CONFIG_HVC_CONSOLE) += hvconsole.o obj-$(CONFIG_HVCS) += hvcserver.o obj-$(CONFIG_HCALL_STATS) += hvCall_inst.o -obj-$(CONFIG_PHYP_DUMP) += phyp_dump.o obj-$(CONFIG_CMM) += cmm.o obj-$(CONFIG_DTL) += dtl.o obj-$(CONFIG_IO_EVENT_IRQ) += io_event_irq.o diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index c0b40af4ce4..8011088392d 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -1,8 +1,8 @@ /* - * eeh.c * Copyright IBM Corporation 2001, 2005, 2006 * Copyright Dave Engebretsen & Todd Inglett 2001 * Copyright Linas Vepstas 2005, 2006 + * Copyright 2001-2012 IBM Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,7 +22,7 @@ */ #include <linux/delay.h> -#include <linux/sched.h> /* for init_mm */ +#include <linux/sched.h> #include <linux/init.h> #include <linux/list.h> #include <linux/pci.h> @@ -86,16 +86,8 @@ /* Time to wait for a PCI slot to report status, in milliseconds */ #define PCI_BUS_RESET_WAIT_MSEC (60*1000) -/* RTAS tokens */ -static int ibm_set_eeh_option; -static int ibm_set_slot_reset; -static int ibm_read_slot_reset_state; -static int ibm_read_slot_reset_state2; -static int ibm_slot_error_detail; -static int ibm_get_config_addr_info; -static int ibm_get_config_addr_info2; -static int ibm_configure_bridge; -static int ibm_configure_pe; +/* Platform dependent EEH operations */ +struct eeh_ops *eeh_ops = NULL; int eeh_subsystem_enabled; EXPORT_SYMBOL(eeh_subsystem_enabled); @@ -103,14 +95,6 @@ EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ static DEFINE_RAW_SPINLOCK(confirm_error_lock); -/* Buffer for reporting slot-error-detail rtas calls. Its here - * in BSS, and not dynamically alloced, so that it ends up in - * RMO where RTAS can access it. - */ -static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; -static DEFINE_SPINLOCK(slot_errbuf_lock); -static int eeh_error_buf_size; - /* Buffer for reporting pci register dumps. Its here in BSS, and * not dynamically alloced, so that it ends up in RMO where RTAS * can access it. @@ -118,74 +102,50 @@ static int eeh_error_buf_size; #define EEH_PCI_REGS_LOG_LEN 4096 static unsigned char pci_regs_buf[EEH_PCI_REGS_LOG_LEN]; -/* System monitoring statistics */ -static unsigned long no_device; -static unsigned long no_dn; -static unsigned long no_cfg_addr; -static unsigned long ignored_check; -static unsigned long total_mmio_ffs; -static unsigned long false_positives; -static unsigned long slot_resets; - -#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) - -/* --------------------------------------------------------------- */ -/* Below lies the EEH event infrastructure */ +/* + * The struct is used to maintain the EEH global statistic + * information. Besides, the EEH global statistics will be + * exported to user space through procfs + */ +struct eeh_stats { + u64 no_device; /* PCI device not found */ + u64 no_dn; /* OF node not found */ + u64 no_cfg_addr; /* Config address not found */ + u64 ignored_check; /* EEH check skipped */ + u64 total_mmio_ffs; /* Total EEH checks */ + u64 false_positives; /* Unnecessary EEH checks */ + u64 slot_resets; /* PE reset */ +}; -static void rtas_slot_error_detail(struct pci_dn *pdn, int severity, - char *driver_log, size_t loglen) -{ - int config_addr; - unsigned long flags; - int rc; +static struct eeh_stats eeh_stats; - /* Log the error with the rtas logger */ - spin_lock_irqsave(&slot_errbuf_lock, flags); - memset(slot_errbuf, 0, eeh_error_buf_size); - - /* Use PE configuration address, if present */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; - - rc = rtas_call(ibm_slot_error_detail, - 8, 1, NULL, config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), - virt_to_phys(driver_log), loglen, - virt_to_phys(slot_errbuf), - eeh_error_buf_size, - severity); - - if (rc == 0) - log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); - spin_unlock_irqrestore(&slot_errbuf_lock, flags); -} +#define IS_BRIDGE(class_code) (((class_code)<<16) == PCI_BASE_CLASS_BRIDGE) /** - * gather_pci_data - copy assorted PCI config space registers to buff - * @pdn: device to report data for + * eeh_gather_pci_data - Copy assorted PCI config space registers to buff + * @edev: device to report data for * @buf: point to buffer in which to log * @len: amount of room in buffer * * This routine captures assorted PCI configuration space data, * and puts them into a buffer for RTAS error logging. */ -static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) +static size_t eeh_gather_pci_data(struct eeh_dev *edev, char * buf, size_t len) { - struct pci_dev *dev = pdn->pcidev; + struct device_node *dn = eeh_dev_to_of_node(edev); + struct pci_dev *dev = eeh_dev_to_pci_dev(edev); u32 cfg; int cap, i; int n = 0; - n += scnprintf(buf+n, len-n, "%s\n", pdn->node->full_name); - printk(KERN_WARNING "EEH: of node=%s\n", pdn->node->full_name); + n += scnprintf(buf+n, len-n, "%s\n", dn->full_name); + printk(KERN_WARNING "EEH: of node=%s\n", dn->full_name); - rtas_read_config(pdn, PCI_VENDOR_ID, 4, &cfg); + eeh_ops->read_config(dn, PCI_VENDOR_ID, 4, &cfg); n += scnprintf(buf+n, len-n, "dev/vend:%08x\n", cfg); printk(KERN_WARNING "EEH: PCI device/vendor: %08x\n", cfg); - rtas_read_config(pdn, PCI_COMMAND, 4, &cfg); + eeh_ops->read_config(dn, PCI_COMMAND, 4, &cfg); n += scnprintf(buf+n, len-n, "cmd/stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI cmd/status register: %08x\n", cfg); @@ -196,11 +156,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) /* Gather bridge-specific registers */ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { - rtas_read_config(pdn, PCI_SEC_STATUS, 2, &cfg); + eeh_ops->read_config(dn, PCI_SEC_STATUS, 2, &cfg); n += scnprintf(buf+n, len-n, "sec stat:%x\n", cfg); printk(KERN_WARNING "EEH: Bridge secondary status: %04x\n", cfg); - rtas_read_config(pdn, PCI_BRIDGE_CONTROL, 2, &cfg); + eeh_ops->read_config(dn, PCI_BRIDGE_CONTROL, 2, &cfg); n += scnprintf(buf+n, len-n, "brdg ctl:%x\n", cfg); printk(KERN_WARNING "EEH: Bridge control: %04x\n", cfg); } @@ -208,11 +168,11 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) /* Dump out the PCI-X command and status regs */ cap = pci_find_capability(dev, PCI_CAP_ID_PCIX); if (cap) { - rtas_read_config(pdn, cap, 4, &cfg); + eeh_ops->read_config(dn, cap, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-cmd:%x\n", cfg); printk(KERN_WARNING "EEH: PCI-X cmd: %08x\n", cfg); - rtas_read_config(pdn, cap+4, 4, &cfg); + eeh_ops->read_config(dn, cap+4, 4, &cfg); n += scnprintf(buf+n, len-n, "pcix-stat:%x\n", cfg); printk(KERN_WARNING "EEH: PCI-X status: %08x\n", cfg); } @@ -225,7 +185,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) "EEH: PCI-E capabilities and status follow:\n"); for (i=0; i<=8; i++) { - rtas_read_config(pdn, cap+4*i, 4, &cfg); + eeh_ops->read_config(dn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); printk(KERN_WARNING "EEH: PCI-E %02x: %08x\n", i, cfg); } @@ -237,7 +197,7 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) "EEH: PCI-E AER capability register set follows:\n"); for (i=0; i<14; i++) { - rtas_read_config(pdn, cap+4*i, 4, &cfg); + eeh_ops->read_config(dn, cap+4*i, 4, &cfg); n += scnprintf(buf+n, len-n, "%02x:%x\n", 4*i, cfg); printk(KERN_WARNING "EEH: PCI-E AER %02x: %08x\n", i, cfg); } @@ -246,111 +206,46 @@ static size_t gather_pci_data(struct pci_dn *pdn, char * buf, size_t len) /* Gather status on devices under the bridge */ if (dev->class >> 16 == PCI_BASE_CLASS_BRIDGE) { - struct device_node *dn; + struct device_node *child; - for_each_child_of_node(pdn->node, dn) { - pdn = PCI_DN(dn); - if (pdn) - n += gather_pci_data(pdn, buf+n, len-n); + for_each_child_of_node(dn, child) { + if (of_node_to_eeh_dev(child)) + n += eeh_gather_pci_data(of_node_to_eeh_dev(child), buf+n, len-n); } } return n; } -void eeh_slot_error_detail(struct pci_dn *pdn, int severity) -{ - size_t loglen = 0; - pci_regs_buf[0] = 0; - - rtas_pci_enable(pdn, EEH_THAW_MMIO); - rtas_configure_bridge(pdn); - eeh_restore_bars(pdn); - loglen = gather_pci_data(pdn, pci_regs_buf, EEH_PCI_REGS_LOG_LEN); - - rtas_slot_error_detail(pdn, severity, pci_regs_buf, loglen); -} - /** - * read_slot_reset_state - Read the reset state of a device node's slot - * @dn: device node to read - * @rets: array to return results in - */ -static int read_slot_reset_state(struct pci_dn *pdn, int rets[]) -{ - int token, outputs; - int config_addr; - - if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { - token = ibm_read_slot_reset_state2; - outputs = 4; - } else { - token = ibm_read_slot_reset_state; - rets[2] = 0; /* fake PE Unavailable info */ - outputs = 3; - } - - /* Use PE configuration address, if present */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; - - return rtas_call(token, 3, outputs, rets, config_addr, - BUID_HI(pdn->phb->buid), BUID_LO(pdn->phb->buid)); -} - -/** - * eeh_wait_for_slot_status - returns error status of slot - * @pdn pci device node - * @max_wait_msecs maximum number to millisecs to wait - * - * Return negative value if a permanent error, else return - * Partition Endpoint (PE) status value. + * eeh_slot_error_detail - Generate combined log including driver log and error log + * @edev: device to report error log for + * @severity: temporary or permanent error log * - * If @max_wait_msecs is positive, then this routine will - * sleep until a valid status can be obtained, or until - * the max allowed wait time is exceeded, in which case - * a -2 is returned. + * This routine should be called to generate the combined log, which + * is comprised of driver log and error log. The driver log is figured + * out from the config space of the corresponding PCI device, while + * the error log is fetched through platform dependent function call. */ -int -eeh_wait_for_slot_status(struct pci_dn *pdn, int max_wait_msecs) +void eeh_slot_error_detail(struct eeh_dev *edev, int severity) { - int rc; - int rets[3]; - int mwait; - - while (1) { - rc = read_slot_reset_state(pdn, rets); - if (rc) return rc; - if (rets[1] == 0) return -1; /* EEH is not supported */ - - if (rets[0] != 5) return rets[0]; /* return actual status */ - - if (rets[2] == 0) return -1; /* permanently unavailable */ + size_t loglen = 0; + pci_regs_buf[0] = 0; - if (max_wait_msecs <= 0) break; + eeh_pci_enable(edev, EEH_OPT_THAW_MMIO); + eeh_ops->configure_bridge(eeh_dev_to_of_node(edev)); + eeh_restore_bars(edev); + loglen = eeh_gather_pci_data(edev, pci_regs_buf, EEH_PCI_REGS_LOG_LEN); - mwait = rets[2]; - if (mwait <= 0) { - printk (KERN_WARNING - "EEH: Firmware returned bad wait value=%d\n", mwait); - mwait = 1000; - } else if (mwait > 300*1000) { - printk (KERN_WARNING - "EEH: Firmware is taking too long, time=%d\n", mwait); - mwait = 300*1000; - } - max_wait_msecs -= mwait; - msleep (mwait); - } - - printk(KERN_WARNING "EEH: Timed out waiting for slot status\n"); - return -2; + eeh_ops->get_log(eeh_dev_to_of_node(edev), severity, pci_regs_buf, loglen); } /** - * eeh_token_to_phys - convert EEH address token to phys address - * @token i/o token, should be address in the form 0xA.... + * eeh_token_to_phys - Convert EEH address token to phys address + * @token: I/O token, should be address in the form 0xA.... + * + * This routine should be called to convert virtual I/O address + * to physical one. */ static inline unsigned long eeh_token_to_phys(unsigned long token) { @@ -365,36 +260,43 @@ static inline unsigned long eeh_token_to_phys(unsigned long token) return pa | (token & (PAGE_SIZE-1)); } -/** - * Return the "partitionable endpoint" (pe) under which this device lies +/** + * eeh_find_device_pe - Retrieve the PE for the given device + * @dn: device node + * + * Return the PE under which this device lies */ -struct device_node * find_device_pe(struct device_node *dn) +struct device_node *eeh_find_device_pe(struct device_node *dn) { - while ((dn->parent) && PCI_DN(dn->parent) && - (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { + while (dn->parent && of_node_to_eeh_dev(dn->parent) && + (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) { dn = dn->parent; } return dn; } -/** Mark all devices that are children of this device as failed. - * Mark the device driver too, so that it can see the failure - * immediately; this is critical, since some drivers poll - * status registers in interrupts ... If a driver is polling, - * and the slot is frozen, then the driver can deadlock in - * an interrupt context, which is bad. +/** + * __eeh_mark_slot - Mark all child devices as failed + * @parent: parent device + * @mode_flag: failure flag + * + * Mark all devices that are children of this device as failed. + * Mark the device driver too, so that it can see the failure + * immediately; this is critical, since some drivers poll + * status registers in interrupts ... If a driver is polling, + * and the slot is frozen, then the driver can deadlock in + * an interrupt context, which is bad. */ - static void __eeh_mark_slot(struct device_node *parent, int mode_flag) { struct device_node *dn; for_each_child_of_node(parent, dn) { - if (PCI_DN(dn)) { + if (of_node_to_eeh_dev(dn)) { /* Mark the pci device driver too */ - struct pci_dev *dev = PCI_DN(dn)->pcidev; + struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev; - PCI_DN(dn)->eeh_mode |= mode_flag; + of_node_to_eeh_dev(dn)->mode |= mode_flag; if (dev && dev->driver) dev->error_state = pci_channel_io_frozen; @@ -404,92 +306,81 @@ static void __eeh_mark_slot(struct device_node *parent, int mode_flag) } } -void eeh_mark_slot (struct device_node *dn, int mode_flag) +/** + * eeh_mark_slot - Mark the indicated device and its children as failed + * @dn: parent device + * @mode_flag: failure flag + * + * Mark the indicated device and its child devices as failed. + * The device drivers are marked as failed as well. + */ +void eeh_mark_slot(struct device_node *dn, int mode_flag) { struct pci_dev *dev; - dn = find_device_pe (dn); + dn = eeh_find_device_pe(dn); /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) + if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) dn = dn->parent; - PCI_DN(dn)->eeh_mode |= mode_flag; + of_node_to_eeh_dev(dn)->mode |= mode_flag; /* Mark the pci device too */ - dev = PCI_DN(dn)->pcidev; + dev = of_node_to_eeh_dev(dn)->pdev; if (dev) dev->error_state = pci_channel_io_frozen; __eeh_mark_slot(dn, mode_flag); } +/** + * __eeh_clear_slot - Clear failure flag for the child devices + * @parent: parent device + * @mode_flag: flag to be cleared + * + * Clear failure flag for the child devices. + */ static void __eeh_clear_slot(struct device_node *parent, int mode_flag) { struct device_node *dn; for_each_child_of_node(parent, dn) { - if (PCI_DN(dn)) { - PCI_DN(dn)->eeh_mode &= ~mode_flag; - PCI_DN(dn)->eeh_check_count = 0; + if (of_node_to_eeh_dev(dn)) { + of_node_to_eeh_dev(dn)->mode &= ~mode_flag; + of_node_to_eeh_dev(dn)->check_count = 0; __eeh_clear_slot(dn, mode_flag); } } } -void eeh_clear_slot (struct device_node *dn, int mode_flag) +/** + * eeh_clear_slot - Clear failure flag for the indicated device and its children + * @dn: parent device + * @mode_flag: flag to be cleared + * + * Clear failure flag for the indicated device and its children. + */ +void eeh_clear_slot(struct device_node *dn, int mode_flag) { unsigned long flags; raw_spin_lock_irqsave(&confirm_error_lock, flags); - dn = find_device_pe (dn); + dn = eeh_find_device_pe(dn); /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) + if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) dn = dn->parent; - PCI_DN(dn)->eeh_mode &= ~mode_flag; - PCI_DN(dn)->eeh_check_count = 0; + of_node_to_eeh_dev(dn)->mode &= ~mode_flag; + of_node_to_eeh_dev(dn)->check_count = 0; __eeh_clear_slot(dn, mode_flag); raw_spin_unlock_irqrestore(&confirm_error_lock, flags); } -void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset) -{ - struct device_node *dn; - - for_each_child_of_node(parent, dn) { - if (PCI_DN(dn)) { - - struct pci_dev *dev = PCI_DN(dn)->pcidev; - - if (dev && dev->driver) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); - } - } -} - -void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) -{ - struct pci_dev *dev; - dn = find_device_pe(dn); - - /* Back up one, since config addrs might be shared */ - if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) - dn = dn->parent; - - dev = PCI_DN(dn)->pcidev; - if (dev) - *freset |= dev->needs_freset; - - __eeh_set_pe_freset(dn, freset); -} - /** - * eeh_dn_check_failure - check if all 1's data is due to EEH slot freeze - * @dn device node - * @dev pci device, if known + * eeh_dn_check_failure - Check if all 1's data is due to EEH slot freeze + * @dn: device node + * @dev: pci device, if known * * Check for an EEH failure for the given device node. Call this * routine if the result of a read was all 0xff's and you want to @@ -504,35 +395,34 @@ void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) { int ret; - int rets[3]; unsigned long flags; - struct pci_dn *pdn; + struct eeh_dev *edev; int rc = 0; const char *location; - total_mmio_ffs++; + eeh_stats.total_mmio_ffs++; if (!eeh_subsystem_enabled) return 0; if (!dn) { - no_dn++; + eeh_stats.no_dn++; return 0; } - dn = find_device_pe(dn); - pdn = PCI_DN(dn); + dn = eeh_find_device_pe(dn); + edev = of_node_to_eeh_dev(dn); /* Access to IO BARs might get this far and still not want checking. */ - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { - ignored_check++; + if (!(edev->mode & EEH_MODE_SUPPORTED) || + edev->mode & EEH_MODE_NOCHECK) { + eeh_stats.ignored_check++; pr_debug("EEH: Ignored check (%x) for %s %s\n", - pdn->eeh_mode, eeh_pci_name(dev), dn->full_name); + edev->mode, eeh_pci_name(dev), dn->full_name); return 0; } - if (!pdn->eeh_config_addr && !pdn->eeh_pe_config_addr) { - no_cfg_addr++; + if (!edev->config_addr && !edev->pe_config_addr) { + eeh_stats.no_cfg_addr++; return 0; } @@ -544,15 +434,15 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) */ raw_spin_lock_irqsave(&confirm_error_lock, flags); rc = 1; - if (pdn->eeh_mode & EEH_MODE_ISOLATED) { - pdn->eeh_check_count ++; - if (pdn->eeh_check_count % EEH_MAX_FAILS == 0) { + if (edev->mode & EEH_MODE_ISOLATED) { + edev->check_count++; + if (edev->check_count % EEH_MAX_FAILS == 0) { location = of_get_property(dn, "ibm,loc-code", NULL); - printk (KERN_ERR "EEH: %d reads ignored for recovering device at " + printk(KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", - pdn->eeh_check_count, location, + edev->check_count, location, eeh_driver_name(dev), eeh_pci_name(dev)); - printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", + printk(KERN_ERR "EEH: Might be infinite loop in %s driver\n", eeh_driver_name(dev)); dump_stack(); } @@ -566,58 +456,39 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * function zero of a multi-function device. * In any case they must share a common PHB. */ - ret = read_slot_reset_state(pdn, rets); - - /* If the call to firmware failed, punt */ - if (ret != 0) { - printk(KERN_WARNING "EEH: read_slot_reset_state() failed; rc=%d dn=%s\n", - ret, dn->full_name); - false_positives++; - pdn->eeh_false_positives ++; - rc = 0; - goto dn_unlock; - } + ret = eeh_ops->get_state(dn, NULL); /* Note that config-io to empty slots may fail; - * they are empty when they don't have children. */ - if ((rets[0] == 5) && (rets[2] == 0) && (dn->child == NULL)) { - false_positives++; - pdn->eeh_false_positives ++; - rc = 0; - goto dn_unlock; - } - - /* If EEH is not supported on this device, punt. */ - if (rets[1] != 1) { - printk(KERN_WARNING "EEH: event on unsupported device, rc=%d dn=%s\n", - ret, dn->full_name); - false_positives++; - pdn->eeh_false_positives ++; - rc = 0; - goto dn_unlock; - } - - /* If not the kind of error we know about, punt. */ - if (rets[0] != 1 && rets[0] != 2 && rets[0] != 4 && rets[0] != 5) { - false_positives++; - pdn->eeh_false_positives ++; + * they are empty when they don't have children. + * We will punt with the following conditions: Failure to get + * PE's state, EEH not support and Permanently unavailable + * state, PE is in good state. + */ + if ((ret < 0) || + (ret == EEH_STATE_NOT_SUPPORT) || + (ret & (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) == + (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) { + eeh_stats.false_positives++; + edev->false_positives ++; rc = 0; goto dn_unlock; } - slot_resets++; + eeh_stats.slot_resets++; /* Avoid repeated reports of this failure, including problems * with other functions on this device, and functions under - * bridges. */ - eeh_mark_slot (dn, EEH_MODE_ISOLATED); + * bridges. + */ + eeh_mark_slot(dn, EEH_MODE_ISOLATED); raw_spin_unlock_irqrestore(&confirm_error_lock, flags); - eeh_send_failure_event (dn, dev); + eeh_send_failure_event(edev); /* Most EEH events are due to device driver bugs. Having * a stack trace will help the device-driver authors figure - * out what happened. So print that out. */ + * out what happened. So print that out. + */ dump_stack(); return 1; @@ -629,9 +500,9 @@ dn_unlock: EXPORT_SYMBOL_GPL(eeh_dn_check_failure); /** - * eeh_check_failure - check if all 1's data is due to EEH slot freeze - * @token i/o token, should be address in the form 0xA.... - * @val value, should be all 1's (XXX why do we need this arg??) + * eeh_check_failure - Check if all 1's data is due to EEH slot freeze + * @token: I/O token, should be address in the form 0xA.... + * @val: value, should be all 1's (XXX why do we need this arg??) * * Check for an EEH failure at the given token address. Call this * routine if the result of a read was all 0xff's and you want to @@ -648,14 +519,14 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon /* Finding the phys addr + pci device; this is pretty quick. */ addr = eeh_token_to_phys((unsigned long __force) token); - dev = pci_get_device_by_addr(addr); + dev = pci_addr_cache_get_device(addr); if (!dev) { - no_device++; + eeh_stats.no_device++; return val; } dn = pci_device_to_OF_node(dev); - eeh_dn_check_failure (dn, dev); + eeh_dn_check_failure(dn, dev); pci_dev_put(dev); return val; @@ -663,115 +534,54 @@ unsigned long eeh_check_failure(const volatile void __iomem *token, unsigned lon EXPORT_SYMBOL(eeh_check_failure); -/* ------------------------------------------------------------- */ -/* The code below deals with error recovery */ /** - * rtas_pci_enable - enable MMIO or DMA transfers for this slot - * @pdn pci device node + * eeh_pci_enable - Enable MMIO or DMA transfers for this slot + * @edev: pci device node + * + * This routine should be called to reenable frozen MMIO or DMA + * so that it would work correctly again. It's useful while doing + * recovery or log collection on the indicated device. */ - -int -rtas_pci_enable(struct pci_dn *pdn, int function) +int eeh_pci_enable(struct eeh_dev *edev, int function) { - int config_addr; int rc; + struct device_node *dn = eeh_dev_to_of_node(edev); - /* Use PE configuration address, if present */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; - - rc = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), - function); - + rc = eeh_ops->set_option(dn, function); if (rc) printk(KERN_WARNING "EEH: Unexpected state change %d, err=%d dn=%s\n", - function, rc, pdn->node->full_name); + function, rc, dn->full_name); - rc = eeh_wait_for_slot_status (pdn, PCI_BUS_RESET_WAIT_MSEC); - if ((rc == 4) && (function == EEH_THAW_MMIO)) + rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC); + if (rc > 0 && (rc & EEH_STATE_MMIO_ENABLED) && + (function == EEH_OPT_THAW_MMIO)) return 0; return rc; } /** - * rtas_pci_slot_reset - raises/lowers the pci #RST line - * @pdn pci device node - * @state: 1/0 to raise/lower the #RST - * - * Clear the EEH-frozen condition on a slot. This routine - * asserts the PCI #RST line if the 'state' argument is '1', - * and drops the #RST line if 'state is '0'. This routine is - * safe to call in an interrupt context. - * - */ - -static void -rtas_pci_slot_reset(struct pci_dn *pdn, int state) -{ - int config_addr; - int rc; - - BUG_ON (pdn==NULL); - - if (!pdn->phb) { - printk (KERN_WARNING "EEH: in slot reset, device node %s has no phb\n", - pdn->node->full_name); - return; - } - - /* Use PE configuration address, if present */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; - - rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL, - config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), - state); - - /* Fundamental-reset not supported on this PE, try hot-reset */ - if (rc == -8 && state == 3) { - rc = rtas_call(ibm_set_slot_reset, 4, 1, NULL, - config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid), 1); - if (rc) - printk(KERN_WARNING - "EEH: Unable to reset the failed slot," - " #RST=%d dn=%s\n", - rc, pdn->node->full_name); - } -} - -/** * pcibios_set_pcie_slot_reset - Set PCI-E reset state - * @dev: pci device struct - * @state: reset state to enter + * @dev: pci device struct + * @state: reset state to enter * * Return value: * 0 if success - **/ + */ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state state) { struct device_node *dn = pci_device_to_OF_node(dev); - struct pci_dn *pdn = PCI_DN(dn); switch (state) { case pcie_deassert_reset: - rtas_pci_slot_reset(pdn, 0); + eeh_ops->reset(dn, EEH_RESET_DEACTIVATE); break; case pcie_hot_reset: - rtas_pci_slot_reset(pdn, 1); + eeh_ops->reset(dn, EEH_RESET_HOT); break; case pcie_warm_reset: - rtas_pci_slot_reset(pdn, 3); + eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL); break; default: return -EINVAL; @@ -781,13 +591,66 @@ int pcibios_set_pcie_reset_state(struct pci_dev *dev, enum pcie_reset_state stat } /** - * rtas_set_slot_reset -- assert the pci #RST line for 1/4 second - * @pdn: pci device node to be reset. + * __eeh_set_pe_freset - Check the required reset for child devices + * @parent: parent device + * @freset: return value + * + * Each device might have its preferred reset type: fundamental or + * hot reset. The routine is used to collect the information from + * the child devices so that they could be reset accordingly. + */ +void __eeh_set_pe_freset(struct device_node *parent, unsigned int *freset) +{ + struct device_node *dn; + + for_each_child_of_node(parent, dn) { + if (of_node_to_eeh_dev(dn)) { + struct pci_dev *dev = of_node_to_eeh_dev(dn)->pdev; + + if (dev && dev->driver) + *freset |= dev->needs_freset; + + __eeh_set_pe_freset(dn, freset); + } + } +} + +/** + * eeh_set_pe_freset - Check the required reset for the indicated device and its children + * @dn: parent device + * @freset: return value + * + * Each device might have its preferred reset type: fundamental or + * hot reset. The routine is used to collected the information for + * the indicated device and its children so that the bunch of the + * devices could be reset properly. */ +void eeh_set_pe_freset(struct device_node *dn, unsigned int *freset) +{ + struct pci_dev *dev; + dn = eeh_find_device_pe(dn); + + /* Back up one, since config addrs might be shared */ + if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) + dn = dn->parent; + + dev = of_node_to_eeh_dev(dn)->pdev; + if (dev) + *freset |= dev->needs_freset; -static void __rtas_set_slot_reset(struct pci_dn *pdn) + __eeh_set_pe_freset(dn, freset); +} + +/** + * eeh_reset_pe_once - Assert the pci #RST line for 1/4 second + * @edev: pci device node to be reset. + * + * Assert the PCI #RST line for 1/4 second. + */ +static void eeh_reset_pe_once(struct eeh_dev *edev) { unsigned int freset = 0; + struct device_node *dn = eeh_dev_to_of_node(edev); /* Determine type of EEH reset required for * Partitionable Endpoint, a hot-reset (1) @@ -795,58 +658,68 @@ static void __rtas_set_slot_reset(struct pci_dn *pdn) * A fundamental reset required by any device under * Partitionable Endpoint trumps hot-reset. */ - eeh_set_pe_freset(pdn->node, &freset); + eeh_set_pe_freset(dn, &freset); if (freset) - rtas_pci_slot_reset(pdn, 3); + eeh_ops->reset(dn, EEH_RESET_FUNDAMENTAL); else - rtas_pci_slot_reset(pdn, 1); + eeh_ops->reset(dn, EEH_RESET_HOT); /* The PCI bus requires that the reset be held high for at least - * a 100 milliseconds. We wait a bit longer 'just in case'. */ - + * a 100 milliseconds. We wait a bit longer 'just in case'. + */ #define PCI_BUS_RST_HOLD_TIME_MSEC 250 - msleep (PCI_BUS_RST_HOLD_TIME_MSEC); + msleep(PCI_BUS_RST_HOLD_TIME_MSEC); /* We might get hit with another EEH freeze as soon as the * pci slot reset line is dropped. Make sure we don't miss - * these, and clear the flag now. */ - eeh_clear_slot (pdn->node, EEH_MODE_ISOLATED); + * these, and clear the flag now. + */ + eeh_clear_slot(dn, EEH_MODE_ISOLATED); - rtas_pci_slot_reset (pdn, 0); + eeh_ops->reset(dn, EEH_RESET_DEACTIVATE); /* After a PCI slot has been reset, the PCI Express spec requires * a 1.5 second idle time for the bus to stabilize, before starting - * up traffic. */ + * up traffic. + */ #define PCI_BUS_SETTLE_TIME_MSEC 1800 - msleep (PCI_BUS_SETTLE_TIME_MSEC); + msleep(PCI_BUS_SETTLE_TIME_MSEC); } -int rtas_set_slot_reset(struct pci_dn *pdn) +/** + * eeh_reset_pe - Reset the indicated PE + * @edev: PCI device associated EEH device + * + * This routine should be called to reset indicated device, including + * PE. A PE might include multiple PCI devices and sometimes PCI bridges + * might be involved as well. + */ +int eeh_reset_pe(struct eeh_dev *edev) { int i, rc; + struct device_node *dn = eeh_dev_to_of_node(edev); /* Take three shots at resetting the bus */ for (i=0; i<3; i++) { - __rtas_set_slot_reset(pdn); + eeh_reset_pe_once(edev); - rc = eeh_wait_for_slot_status(pdn, PCI_BUS_RESET_WAIT_MSEC); - if (rc == 0) + rc = eeh_ops->wait_state(dn, PCI_BUS_RESET_WAIT_MSEC); + if (rc == (EEH_STATE_MMIO_ACTIVE | EEH_STATE_DMA_ACTIVE)) return 0; if (rc < 0) { printk(KERN_ERR "EEH: unrecoverable slot failure %s\n", - pdn->node->full_name); + dn->full_name); return -1; } printk(KERN_ERR "EEH: bus reset %d failed on slot %s, rc=%d\n", - i+1, pdn->node->full_name, rc); + i+1, dn->full_name, rc); } return -1; } -/* ------------------------------------------------------- */ /** Save and restore of PCI BARs * * Although firmware will set up BARs during boot, it doesn't @@ -856,181 +729,122 @@ int rtas_set_slot_reset(struct pci_dn *pdn) */ /** - * __restore_bars - Restore the Base Address Registers - * @pdn: pci device node + * eeh_restore_one_device_bars - Restore the Base Address Registers for one device + * @edev: PCI device associated EEH device * * Loads the PCI configuration space base address registers, * the expansion ROM base address, the latency timer, and etc. * from the saved values in the device node. */ -static inline void __restore_bars (struct pci_dn *pdn) +static inline void eeh_restore_one_device_bars(struct eeh_dev *edev) { int i; u32 cmd; + struct device_node *dn = eeh_dev_to_of_node(edev); + + if (!edev->phb) + return; - if (NULL==pdn->phb) return; for (i=4; i<10; i++) { - rtas_write_config(pdn, i*4, 4, pdn->config_space[i]); + eeh_ops->write_config(dn, i*4, 4, edev->config_space[i]); } /* 12 == Expansion ROM Address */ - rtas_write_config(pdn, 12*4, 4, pdn->config_space[12]); + eeh_ops->write_config(dn, 12*4, 4, edev->config_space[12]); #define BYTE_SWAP(OFF) (8*((OFF)/4)+3-(OFF)) -#define SAVED_BYTE(OFF) (((u8 *)(pdn->config_space))[BYTE_SWAP(OFF)]) +#define SAVED_BYTE(OFF) (((u8 *)(edev->config_space))[BYTE_SWAP(OFF)]) - rtas_write_config (pdn, PCI_CACHE_LINE_SIZE, 1, + eeh_ops->write_config(dn, PCI_CACHE_LINE_SIZE, 1, SAVED_BYTE(PCI_CACHE_LINE_SIZE)); - rtas_write_config (pdn, PCI_LATENCY_TIMER, 1, + eeh_ops->write_config(dn, PCI_LATENCY_TIMER, 1, SAVED_BYTE(PCI_LATENCY_TIMER)); /* max latency, min grant, interrupt pin and line */ - rtas_write_config(pdn, 15*4, 4, pdn->config_space[15]); + eeh_ops->write_config(dn, 15*4, 4, edev->config_space[15]); /* Restore PERR & SERR bits, some devices require it, - don't touch the other command bits */ - rtas_read_config(pdn, PCI_COMMAND, 4, &cmd); - if (pdn->config_space[1] & PCI_COMMAND_PARITY) + * don't touch the other command bits + */ + eeh_ops->read_config(dn, PCI_COMMAND, 4, &cmd); + if (edev->config_space[1] & PCI_COMMAND_PARITY) cmd |= PCI_COMMAND_PARITY; else cmd &= ~PCI_COMMAND_PARITY; - if (pdn->config_space[1] & PCI_COMMAND_SERR) + if (edev->config_space[1] & PCI_COMMAND_SERR) cmd |= PCI_COMMAND_SERR; else cmd &= ~PCI_COMMAND_SERR; - rtas_write_config(pdn, PCI_COMMAND, 4, cmd); + eeh_ops->write_config(dn, PCI_COMMAND, 4, cmd); } /** - * eeh_restore_bars - restore the PCI config space info + * eeh_restore_bars - Restore the PCI config space info + * @edev: EEH device * * This routine performs a recursive walk to the children * of this device as well. */ -void eeh_restore_bars(struct pci_dn *pdn) +void eeh_restore_bars(struct eeh_dev *edev) { struct device_node *dn; - if (!pdn) + if (!edev) return; - if ((pdn->eeh_mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(pdn->class_code)) - __restore_bars (pdn); + if ((edev->mode & EEH_MODE_SUPPORTED) && !IS_BRIDGE(edev->class_code)) + eeh_restore_one_device_bars(edev); - for_each_child_of_node(pdn->node, dn) - eeh_restore_bars (PCI_DN(dn)); + for_each_child_of_node(eeh_dev_to_of_node(edev), dn) + eeh_restore_bars(of_node_to_eeh_dev(dn)); } /** - * eeh_save_bars - save device bars + * eeh_save_bars - Save device bars + * @edev: PCI device associated EEH device * * Save the values of the device bars. Unlike the restore * routine, this routine is *not* recursive. This is because * PCI devices are added individually; but, for the restore, * an entire slot is reset at a time. */ -static void eeh_save_bars(struct pci_dn *pdn) +static void eeh_save_bars(struct eeh_dev *edev) { int i; + struct device_node *dn; - if (!pdn ) + if (!edev) return; + dn = eeh_dev_to_of_node(edev); for (i = 0; i < 16; i++) - rtas_read_config(pdn, i * 4, 4, &pdn->config_space[i]); -} - -void -rtas_configure_bridge(struct pci_dn *pdn) -{ - int config_addr; - int rc; - int token; - - /* Use PE configuration address, if present */ - config_addr = pdn->eeh_config_addr; - if (pdn->eeh_pe_config_addr) - config_addr = pdn->eeh_pe_config_addr; - - /* Use new configure-pe function, if supported */ - if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) - token = ibm_configure_pe; - else - token = ibm_configure_bridge; - - rc = rtas_call(token, 3, 1, NULL, - config_addr, - BUID_HI(pdn->phb->buid), - BUID_LO(pdn->phb->buid)); - if (rc) { - printk (KERN_WARNING "EEH: Unable to configure device bridge (%d) for %s\n", - rc, pdn->node->full_name); - } + eeh_ops->read_config(dn, i * 4, 4, &edev->config_space[i]); } -/* ------------------------------------------------------------- */ -/* The code below deals with enabling EEH for devices during the - * early boot sequence. EEH must be enabled before any PCI probing - * can be done. +/** + * eeh_early_enable - Early enable EEH on the indicated device + * @dn: device node + * @data: BUID + * + * Enable EEH functionality on the specified PCI device. The function + * is expected to be called before real PCI probing is done. However, + * the PHBs have been initialized at this point. */ - -#define EEH_ENABLE 1 - -struct eeh_early_enable_info { - unsigned int buid_hi; - unsigned int buid_lo; -}; - -static int get_pe_addr (int config_addr, - struct eeh_early_enable_info *info) +static void *eeh_early_enable(struct device_node *dn, void *data) { - unsigned int rets[3]; - int ret; - - /* Use latest config-addr token on power6 */ - if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { - /* Make sure we have a PE in hand */ - ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, - config_addr, info->buid_hi, info->buid_lo, 1); - if (ret || (rets[0]==0)) - return 0; - - ret = rtas_call (ibm_get_config_addr_info2, 4, 2, rets, - config_addr, info->buid_hi, info->buid_lo, 0); - if (ret) - return 0; - return rets[0]; - } - - /* Use older config-addr token on power5 */ - if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { - ret = rtas_call (ibm_get_config_addr_info, 4, 2, rets, - config_addr, info->buid_hi, info->buid_lo, 0); - if (ret) - return 0; - return rets[0]; - } - return 0; -} - -/* Enable eeh for the given device node. */ -static void *early_enable_eeh(struct device_node *dn, void *data) -{ - unsigned int rets[3]; - struct eeh_early_enable_info *info = data; int ret; const u32 *class_code = of_get_property(dn, "class-code", NULL); const u32 *vendor_id = of_get_property(dn, "vendor-id", NULL); const u32 *device_id = of_get_property(dn, "device-id", NULL); const u32 *regs; int enable; - struct pci_dn *pdn = PCI_DN(dn); + struct eeh_dev *edev = of_node_to_eeh_dev(dn); - pdn->class_code = 0; - pdn->eeh_mode = 0; - pdn->eeh_check_count = 0; - pdn->eeh_freeze_count = 0; - pdn->eeh_false_positives = 0; + edev->class_code = 0; + edev->mode = 0; + edev->check_count = 0; + edev->freeze_count = 0; + edev->false_positives = 0; if (!of_device_is_available(dn)) return NULL; @@ -1041,54 +855,56 @@ static void *early_enable_eeh(struct device_node *dn, void *data) /* There is nothing to check on PCI to ISA bridges */ if (dn->type && !strcmp(dn->type, "isa")) { - pdn->eeh_mode |= EEH_MODE_NOCHECK; + edev->mode |= EEH_MODE_NOCHECK; return NULL; } - pdn->class_code = *class_code; + edev->class_code = *class_code; /* Ok... see if this device supports EEH. Some do, some don't, - * and the only way to find out is to check each and every one. */ + * and the only way to find out is to check each and every one. + */ regs = of_get_property(dn, "reg", NULL); if (regs) { /* First register entry is addr (00BBSS00) */ /* Try to enable eeh */ - ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, - regs[0], info->buid_hi, info->buid_lo, - EEH_ENABLE); + ret = eeh_ops->set_option(dn, EEH_OPT_ENABLE); enable = 0; if (ret == 0) { - pdn->eeh_config_addr = regs[0]; + edev->config_addr = regs[0]; /* If the newer, better, ibm,get-config-addr-info is supported, - * then use that instead. */ - pdn->eeh_pe_config_addr = get_pe_addr(pdn->eeh_config_addr, info); + * then use that instead. + */ + edev->pe_config_addr = eeh_ops->get_pe_addr(dn); /* Some older systems (Power4) allow the * ibm,set-eeh-option call to succeed even on nodes * where EEH is not supported. Verify support - * explicitly. */ - ret = read_slot_reset_state(pdn, rets); - if ((ret == 0) && (rets[1] == 1)) + * explicitly. + */ + ret = eeh_ops->get_state(dn, NULL); + if (ret > 0 && ret != EEH_STATE_NOT_SUPPORT) enable = 1; } if (enable) { eeh_subsystem_enabled = 1; - pdn->eeh_mode |= EEH_MODE_SUPPORTED; + edev->mode |= EEH_MODE_SUPPORTED; pr_debug("EEH: %s: eeh enabled, config=%x pe_config=%x\n", - dn->full_name, pdn->eeh_config_addr, - pdn->eeh_pe_config_addr); + dn->full_name, edev->config_addr, + edev->pe_config_addr); } else { /* This device doesn't support EEH, but it may have an - * EEH parent, in which case we mark it as supported. */ - if (dn->parent && PCI_DN(dn->parent) - && (PCI_DN(dn->parent)->eeh_mode & EEH_MODE_SUPPORTED)) { + * EEH parent, in which case we mark it as supported. + */ + if (dn->parent && of_node_to_eeh_dev(dn->parent) && + (of_node_to_eeh_dev(dn->parent)->mode & EEH_MODE_SUPPORTED)) { /* Parent supports EEH. */ - pdn->eeh_mode |= EEH_MODE_SUPPORTED; - pdn->eeh_config_addr = PCI_DN(dn->parent)->eeh_config_addr; + edev->mode |= EEH_MODE_SUPPORTED; + edev->config_addr = of_node_to_eeh_dev(dn->parent)->config_addr; return NULL; } } @@ -1097,11 +913,63 @@ static void *early_enable_eeh(struct device_node *dn, void *data) dn->full_name); } - eeh_save_bars(pdn); + eeh_save_bars(edev); return NULL; } -/* +/** + * eeh_ops_register - Register platform dependent EEH operations + * @ops: platform dependent EEH operations + * + * Register the platform dependent EEH operation callback + * functions. The platform should call this function before + * any other EEH operations. + */ +int __init eeh_ops_register(struct eeh_ops *ops) +{ + if (!ops->name) { + pr_warning("%s: Invalid EEH ops name for %p\n", + __func__, ops); + return -EINVAL; + } + + if (eeh_ops && eeh_ops != ops) { + pr_warning("%s: EEH ops of platform %s already existing (%s)\n", + __func__, eeh_ops->name, ops->name); + return -EEXIST; + } + + eeh_ops = ops; + + return 0; +} + +/** + * eeh_ops_unregister - Unreigster platform dependent EEH operations + * @name: name of EEH platform operations + * + * Unregister the platform dependent EEH operation callback + * functions. + */ +int __exit eeh_ops_unregister(const char *name) +{ + if (!name || !strlen(name)) { + pr_warning("%s: Invalid EEH ops name\n", + __func__); + return -EINVAL; + } + + if (eeh_ops && !strcmp(eeh_ops->name, name)) { + eeh_ops = NULL; + return 0; + } + + return -EEXIST; +} + +/** + * eeh_init - EEH initialization + * * Initialize EEH by trying to enable it for all of the adapters in the system. * As a side effect we can determine here if eeh is supported at all. * Note that we leave EEH on so failed config cycles won't cause a machine @@ -1117,50 +985,35 @@ static void *early_enable_eeh(struct device_node *dn, void *data) void __init eeh_init(void) { struct device_node *phb, *np; - struct eeh_early_enable_info info; + int ret; + + /* call platform initialization function */ + if (!eeh_ops) { + pr_warning("%s: Platform EEH operation not found\n", + __func__); + return; + } else if ((ret = eeh_ops->init())) { + pr_warning("%s: Failed to call platform init function (%d)\n", + __func__, ret); + return; + } raw_spin_lock_init(&confirm_error_lock); - spin_lock_init(&slot_errbuf_lock); np = of_find_node_by_path("/rtas"); if (np == NULL) return; - ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); - ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); - ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); - ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); - ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); - ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); - ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); - ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); - ibm_configure_pe = rtas_token("ibm,configure-pe"); - - if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) - return; - - eeh_error_buf_size = rtas_token("rtas-error-log-max"); - if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { - eeh_error_buf_size = 1024; - } - if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { - printk(KERN_WARNING "EEH: rtas-error-log-max is bigger than allocated " - "buffer ! (%d vs %d)", eeh_error_buf_size, RTAS_ERROR_LOG_MAX); - eeh_error_buf_size = RTAS_ERROR_LOG_MAX; - } - /* Enable EEH for all adapters. Note that eeh requires buid's */ for (phb = of_find_node_by_name(NULL, "pci"); phb; phb = of_find_node_by_name(phb, "pci")) { unsigned long buid; buid = get_phb_buid(phb); - if (buid == 0 || PCI_DN(phb) == NULL) + if (buid == 0 || !of_node_to_eeh_dev(phb)) continue; - info.buid_lo = BUID_LO(buid); - info.buid_hi = BUID_HI(buid); - traverse_pci_devices(phb, early_enable_eeh, &info); + traverse_pci_devices(phb, eeh_early_enable, NULL); } if (eeh_subsystem_enabled) @@ -1170,7 +1023,7 @@ void __init eeh_init(void) } /** - * eeh_add_device_early - enable EEH for the indicated device_node + * eeh_add_device_early - Enable EEH for the indicated device_node * @dn: device node for which to set up EEH * * This routine must be used to perform EEH initialization for PCI @@ -1184,21 +1037,26 @@ void __init eeh_init(void) static void eeh_add_device_early(struct device_node *dn) { struct pci_controller *phb; - struct eeh_early_enable_info info; - if (!dn || !PCI_DN(dn)) + if (!dn || !of_node_to_eeh_dev(dn)) return; - phb = PCI_DN(dn)->phb; + phb = of_node_to_eeh_dev(dn)->phb; /* USB Bus children of PCI devices will not have BUID's */ if (NULL == phb || 0 == phb->buid) return; - info.buid_hi = BUID_HI(phb->buid); - info.buid_lo = BUID_LO(phb->buid); - early_enable_eeh(dn, &info); + eeh_early_enable(dn, NULL); } +/** + * eeh_add_device_tree_early - Enable EEH for the indicated device + * @dn: device node + * + * This routine must be used to perform EEH initialization for the + * indicated PCI device that was added after system boot (e.g. + * hotplug, dlpar). + */ void eeh_add_device_tree_early(struct device_node *dn) { struct device_node *sib; @@ -1210,7 +1068,7 @@ void eeh_add_device_tree_early(struct device_node *dn) EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); /** - * eeh_add_device_late - perform EEH initialization for the indicated pci device + * eeh_add_device_late - Perform EEH initialization for the indicated pci device * @dev: pci device for which to set up EEH * * This routine must be used to complete EEH initialization for PCI @@ -1219,7 +1077,7 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_early); static void eeh_add_device_late(struct pci_dev *dev) { struct device_node *dn; - struct pci_dn *pdn; + struct eeh_dev *edev; if (!dev || !eeh_subsystem_enabled) return; @@ -1227,20 +1085,29 @@ static void eeh_add_device_late(struct pci_dev *dev) pr_debug("EEH: Adding device %s\n", pci_name(dev)); dn = pci_device_to_OF_node(dev); - pdn = PCI_DN(dn); - if (pdn->pcidev == dev) { + edev = pci_dev_to_eeh_dev(dev); + if (edev->pdev == dev) { pr_debug("EEH: Already referenced !\n"); return; } - WARN_ON(pdn->pcidev); + WARN_ON(edev->pdev); - pci_dev_get (dev); - pdn->pcidev = dev; + pci_dev_get(dev); + edev->pdev = dev; + dev->dev.archdata.edev = edev; pci_addr_cache_insert_device(dev); eeh_sysfs_add_device(dev); } +/** + * eeh_add_device_tree_late - Perform EEH initialization for the indicated PCI bus + * @bus: PCI bus + * + * This routine must be used to perform EEH initialization for PCI + * devices which are attached to the indicated PCI bus. The PCI bus + * is added after system boot through hotplug or dlpar. + */ void eeh_add_device_tree_late(struct pci_bus *bus) { struct pci_dev *dev; @@ -1257,7 +1124,7 @@ void eeh_add_device_tree_late(struct pci_bus *bus) EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); /** - * eeh_remove_device - undo EEH setup for the indicated pci device + * eeh_remove_device - Undo EEH setup for the indicated pci device * @dev: pci device to be removed * * This routine should be called when a device is removed from @@ -1268,25 +1135,35 @@ EXPORT_SYMBOL_GPL(eeh_add_device_tree_late); */ static void eeh_remove_device(struct pci_dev *dev) { - struct device_node *dn; + struct eeh_dev *edev; + if (!dev || !eeh_subsystem_enabled) return; + edev = pci_dev_to_eeh_dev(dev); /* Unregister the device with the EEH/PCI address search system */ pr_debug("EEH: Removing device %s\n", pci_name(dev)); - dn = pci_device_to_OF_node(dev); - if (PCI_DN(dn)->pcidev == NULL) { + if (!edev || !edev->pdev) { pr_debug("EEH: Not referenced !\n"); return; } - PCI_DN(dn)->pcidev = NULL; - pci_dev_put (dev); + edev->pdev = NULL; + dev->dev.archdata.edev = NULL; + pci_dev_put(dev); pci_addr_cache_remove_device(dev); eeh_sysfs_remove_device(dev); } +/** + * eeh_remove_bus_device - Undo EEH setup for the indicated PCI device + * @dev: PCI device + * + * This routine must be called when a device is removed from the + * running system through hotplug or dlpar. The corresponding + * PCI address cache will be removed. + */ void eeh_remove_bus_device(struct pci_dev *dev) { struct pci_bus *bus = dev->subordinate; @@ -1305,21 +1182,24 @@ static int proc_eeh_show(struct seq_file *m, void *v) { if (0 == eeh_subsystem_enabled) { seq_printf(m, "EEH Subsystem is globally disabled\n"); - seq_printf(m, "eeh_total_mmio_ffs=%ld\n", total_mmio_ffs); + seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs); } else { seq_printf(m, "EEH Subsystem is enabled\n"); seq_printf(m, - "no device=%ld\n" - "no device node=%ld\n" - "no config address=%ld\n" - "check not wanted=%ld\n" - "eeh_total_mmio_ffs=%ld\n" - "eeh_false_positives=%ld\n" - "eeh_slot_resets=%ld\n", - no_device, no_dn, no_cfg_addr, - ignored_check, total_mmio_ffs, - false_positives, - slot_resets); + "no device=%llu\n" + "no device node=%llu\n" + "no config address=%llu\n" + "check not wanted=%llu\n" + "eeh_total_mmio_ffs=%llu\n" + "eeh_false_positives=%llu\n" + "eeh_slot_resets=%llu\n", + eeh_stats.no_device, + eeh_stats.no_dn, + eeh_stats.no_cfg_addr, + eeh_stats.ignored_check, + eeh_stats.total_mmio_ffs, + eeh_stats.false_positives, + eeh_stats.slot_resets); } return 0; diff --git a/arch/powerpc/platforms/pseries/eeh_cache.c b/arch/powerpc/platforms/pseries/eeh_cache.c index fc5ae767989..e5ae1c687c6 100644 --- a/arch/powerpc/platforms/pseries/eeh_cache.c +++ b/arch/powerpc/platforms/pseries/eeh_cache.c @@ -1,5 +1,4 @@ /* - * eeh_cache.c * PCI address cache; allows the lookup of PCI devices based on I/O address * * Copyright IBM Corporation 2004 @@ -47,8 +46,7 @@ * than any hash algo I could think of for this problem, even * with the penalty of slow pointer chases for d-cache misses). */ -struct pci_io_addr_range -{ +struct pci_io_addr_range { struct rb_node rb_node; unsigned long addr_lo; unsigned long addr_hi; @@ -56,13 +54,12 @@ struct pci_io_addr_range unsigned int flags; }; -static struct pci_io_addr_cache -{ +static struct pci_io_addr_cache { struct rb_root rb_root; spinlock_t piar_lock; } pci_io_addr_cache_root; -static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) +static inline struct pci_dev *__pci_addr_cache_get_device(unsigned long addr) { struct rb_node *n = pci_io_addr_cache_root.rb_root.rb_node; @@ -86,7 +83,7 @@ static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) } /** - * pci_get_device_by_addr - Get device, given only address + * pci_addr_cache_get_device - Get device, given only address * @addr: mmio (PIO) phys address or i/o port number * * Given an mmio phys address, or a port number, find a pci device @@ -95,13 +92,13 @@ static inline struct pci_dev *__pci_get_device_by_addr(unsigned long addr) * from zero (that is, they do *not* have pci_io_addr added in). * It is safe to call this function within an interrupt. */ -struct pci_dev *pci_get_device_by_addr(unsigned long addr) +struct pci_dev *pci_addr_cache_get_device(unsigned long addr) { struct pci_dev *dev; unsigned long flags; spin_lock_irqsave(&pci_io_addr_cache_root.piar_lock, flags); - dev = __pci_get_device_by_addr(addr); + dev = __pci_addr_cache_get_device(addr); spin_unlock_irqrestore(&pci_io_addr_cache_root.piar_lock, flags); return dev; } @@ -166,7 +163,7 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, #ifdef DEBUG printk(KERN_DEBUG "PIAR: insert range=[%lx:%lx] dev=%s\n", - alo, ahi, pci_name (dev)); + alo, ahi, pci_name(dev)); #endif rb_link_node(&piar->rb_node, parent, p); @@ -178,7 +175,7 @@ pci_addr_cache_insert(struct pci_dev *dev, unsigned long alo, static void __pci_addr_cache_insert_device(struct pci_dev *dev) { struct device_node *dn; - struct pci_dn *pdn; + struct eeh_dev *edev; int i; dn = pci_device_to_OF_node(dev); @@ -187,13 +184,19 @@ static void __pci_addr_cache_insert_device(struct pci_dev *dev) return; } + edev = of_node_to_eeh_dev(dn); + if (!edev) { + pr_warning("PCI: no EEH dev found for dn=%s\n", + dn->full_name); + return; + } + /* Skip any devices for which EEH is not enabled. */ - pdn = PCI_DN(dn); - if (!(pdn->eeh_mode & EEH_MODE_SUPPORTED) || - pdn->eeh_mode & EEH_MODE_NOCHECK) { + if (!(edev->mode & EEH_MODE_SUPPORTED) || + edev->mode & EEH_MODE_NOCHECK) { #ifdef DEBUG - printk(KERN_INFO "PCI: skip building address cache for=%s - %s\n", - pci_name(dev), pdn->node->full_name); + pr_info("PCI: skip building address cache for=%s - %s\n", + pci_name(dev), dn->full_name); #endif return; } @@ -284,6 +287,7 @@ void pci_addr_cache_remove_device(struct pci_dev *dev) void __init pci_addr_cache_build(void) { struct device_node *dn; + struct eeh_dev *edev; struct pci_dev *dev = NULL; spin_lock_init(&pci_io_addr_cache_root.piar_lock); @@ -294,8 +298,14 @@ void __init pci_addr_cache_build(void) dn = pci_device_to_OF_node(dev); if (!dn) continue; + + edev = of_node_to_eeh_dev(dn); + if (!edev) + continue; + pci_dev_get(dev); /* matching put is in eeh_remove_device() */ - PCI_DN(dn)->pcidev = dev; + dev->dev.archdata.edev = edev; + edev->pdev = dev; eeh_sysfs_add_device(dev); } diff --git a/arch/powerpc/platforms/pseries/eeh_dev.c b/arch/powerpc/platforms/pseries/eeh_dev.c new file mode 100644 index 00000000000..f3aed7dcae9 --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_dev.c @@ -0,0 +1,102 @@ +/* + * The file intends to implement dynamic creation of EEH device, which will + * be bound with OF node and PCI device simutaneously. The EEH devices would + * be foundamental information for EEH core components to work proerly. Besides, + * We have to support multiple situations where dynamic creation of EEH device + * is required: + * + * 1) Before PCI emunation starts, we need create EEH devices according to the + * PCI sensitive OF nodes. + * 2) When PCI emunation is done, we need do the binding between PCI device and + * the associated EEH device. + * 3) DR (Dynamic Reconfiguration) would create PCI sensitive OF node. EEH device + * will be created while PCI sensitive OF node is detected from DR. + * 4) PCI hotplug needs redoing the binding between PCI device and EEH device. If + * PHB is newly inserted, we also need create EEH devices accordingly. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2012. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/export.h> +#include <linux/gfp.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/string.h> + +#include <asm/pci-bridge.h> +#include <asm/ppc-pci.h> + +/** + * eeh_dev_init - Create EEH device according to OF node + * @dn: device node + * @data: PHB + * + * It will create EEH device according to the given OF node. The function + * might be called by PCI emunation, DR, PHB hotplug. + */ +void * __devinit eeh_dev_init(struct device_node *dn, void *data) +{ + struct pci_controller *phb = data; + struct eeh_dev *edev; + + /* Allocate EEH device */ + edev = zalloc_maybe_bootmem(sizeof(*edev), GFP_KERNEL); + if (!edev) { + pr_warning("%s: out of memory\n", __func__); + return NULL; + } + + /* Associate EEH device with OF node */ + dn->edev = edev; + edev->dn = dn; + edev->phb = phb; + + return NULL; +} + +/** + * eeh_dev_phb_init_dynamic - Create EEH devices for devices included in PHB + * @phb: PHB + * + * Scan the PHB OF node and its child association, then create the + * EEH devices accordingly + */ +void __devinit eeh_dev_phb_init_dynamic(struct pci_controller *phb) +{ + struct device_node *dn = phb->dn; + + /* EEH device for PHB */ + eeh_dev_init(dn, phb); + + /* EEH devices for children OF nodes */ + traverse_pci_devices(dn, eeh_dev_init, phb); +} + +/** + * eeh_dev_phb_init - Create EEH devices for devices included in existing PHBs + * + * Scan all the existing PHBs and create EEH devices for their OF + * nodes and their children OF nodes + */ +void __init eeh_dev_phb_init(void) +{ + struct pci_controller *phb, *tmp; + + list_for_each_entry_safe(phb, tmp, &hose_list, list_node) + eeh_dev_phb_init_dynamic(phb); +} diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 1b6cb10589e..baf92cd9dfa 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -33,8 +33,14 @@ #include <asm/prom.h> #include <asm/rtas.h> - -static inline const char * pcid_name (struct pci_dev *pdev) +/** + * eeh_pcid_name - Retrieve name of PCI device driver + * @pdev: PCI device + * + * This routine is used to retrieve the name of PCI device driver + * if that's valid. + */ +static inline const char *eeh_pcid_name(struct pci_dev *pdev) { if (pdev && pdev->dev.driver) return pdev->dev.driver->name; @@ -64,48 +70,59 @@ static void print_device_node_tree(struct pci_dn *pdn, int dent) #endif /** - * eeh_disable_irq - disable interrupt for the recovering device + * eeh_disable_irq - Disable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called when reporting temporary or permanent + * error to the particular PCI device to disable interrupt of that + * device. If the device has enabled MSI or MSI-X interrupt, we needn't + * do real work because EEH should freeze DMA transfers for those PCI + * devices encountering EEH errors, which includes MSI or MSI-X. */ static void eeh_disable_irq(struct pci_dev *dev) { - struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = pci_dev_to_eeh_dev(dev); /* Don't disable MSI and MSI-X interrupts. They are * effectively disabled by the DMA Stopped state * when an EEH error occurs. - */ + */ if (dev->msi_enabled || dev->msix_enabled) return; if (!irq_has_action(dev->irq)) return; - PCI_DN(dn)->eeh_mode |= EEH_MODE_IRQ_DISABLED; + edev->mode |= EEH_MODE_IRQ_DISABLED; disable_irq_nosync(dev->irq); } /** - * eeh_enable_irq - enable interrupt for the recovering device + * eeh_enable_irq - Enable interrupt for the recovering device + * @dev: PCI device + * + * This routine must be called to enable interrupt while failed + * device could be resumed. */ static void eeh_enable_irq(struct pci_dev *dev) { - struct device_node *dn = pci_device_to_OF_node(dev); + struct eeh_dev *edev = pci_dev_to_eeh_dev(dev); - if ((PCI_DN(dn)->eeh_mode) & EEH_MODE_IRQ_DISABLED) { - PCI_DN(dn)->eeh_mode &= ~EEH_MODE_IRQ_DISABLED; + if ((edev->mode) & EEH_MODE_IRQ_DISABLED) { + edev->mode &= ~EEH_MODE_IRQ_DISABLED; enable_irq(dev->irq); } } -/* ------------------------------------------------------- */ /** - * eeh_report_error - report pci error to each device driver + * eeh_report_error - Report pci error to each device driver + * @dev: PCI device + * @userdata: return value * * Report an EEH error to each device driver, collect up and * merge the device driver responses. Cumulative response * passed back in "userdata". */ - static int eeh_report_error(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; @@ -122,7 +139,7 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata) !driver->err_handler->error_detected) return 0; - rc = driver->err_handler->error_detected (dev, pci_channel_io_frozen); + rc = driver->err_handler->error_detected(dev, pci_channel_io_frozen); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; @@ -132,13 +149,14 @@ static int eeh_report_error(struct pci_dev *dev, void *userdata) } /** - * eeh_report_mmio_enabled - tell drivers that MMIO has been enabled + * eeh_report_mmio_enabled - Tell drivers that MMIO has been enabled + * @dev: PCI device + * @userdata: return value * * Tells each device driver that IO ports, MMIO and config space I/O * are now enabled. Collects up and merges the device driver responses. * Cumulative response passed back in "userdata". */ - static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; @@ -149,7 +167,7 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) !driver->err_handler->mmio_enabled) return 0; - rc = driver->err_handler->mmio_enabled (dev); + rc = driver->err_handler->mmio_enabled(dev); /* A driver that needs a reset trumps all others */ if (rc == PCI_ERS_RESULT_NEED_RESET) *res = rc; @@ -159,9 +177,15 @@ static int eeh_report_mmio_enabled(struct pci_dev *dev, void *userdata) } /** - * eeh_report_reset - tell device that slot has been reset + * eeh_report_reset - Tell device that slot has been reset + * @dev: PCI device + * @userdata: return value + * + * This routine must be called while EEH tries to reset particular + * PCI device so that the associated PCI device driver could take + * some actions, usually to save data the driver needs so that the + * driver can work again while the device is recovered. */ - static int eeh_report_reset(struct pci_dev *dev, void *userdata) { enum pci_ers_result rc, *res = userdata; @@ -188,9 +212,14 @@ static int eeh_report_reset(struct pci_dev *dev, void *userdata) } /** - * eeh_report_resume - tell device to resume normal operations + * eeh_report_resume - Tell device to resume normal operations + * @dev: PCI device + * @userdata: return value + * + * This routine must be called to notify the device driver that it + * could resume so that the device driver can do some initialization + * to make the recovered device work again. */ - static int eeh_report_resume(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; @@ -212,12 +241,13 @@ static int eeh_report_resume(struct pci_dev *dev, void *userdata) } /** - * eeh_report_failure - tell device driver that device is dead. + * eeh_report_failure - Tell device driver that device is dead. + * @dev: PCI device + * @userdata: return value * * This informs the device driver that the device is permanently * dead, and that no further recovery attempts will be made on it. */ - static int eeh_report_failure(struct pci_dev *dev, void *userdata) { struct pci_driver *driver = dev->driver; @@ -238,65 +268,46 @@ static int eeh_report_failure(struct pci_dev *dev, void *userdata) return 0; } -/* ------------------------------------------------------- */ /** - * handle_eeh_events -- reset a PCI device after hard lockup. - * - * pSeries systems will isolate a PCI slot if the PCI-Host - * bridge detects address or data parity errors, DMA's - * occurring to wild addresses (which usually happen due to - * bugs in device drivers or in PCI adapter firmware). - * Slot isolations also occur if #SERR, #PERR or other misc - * PCI-related errors are detected. + * eeh_reset_device - Perform actual reset of a pci slot + * @edev: PE associated EEH device + * @bus: PCI bus corresponding to the isolcated slot * - * Recovery process consists of unplugging the device driver - * (which generated hotplug events to userspace), then issuing - * a PCI #RST to the device, then reconfiguring the PCI config - * space for all bridges & devices under this slot, and then - * finally restarting the device drivers (which cause a second - * set of hotplug events to go out to userspace). + * This routine must be called to do reset on the indicated PE. + * During the reset, udev might be invoked because those affected + * PCI devices will be removed and then added. */ - -/** - * eeh_reset_device() -- perform actual reset of a pci slot - * @bus: pointer to the pci bus structure corresponding - * to the isolated slot. A non-null value will - * cause all devices under the bus to be removed - * and then re-added. - * @pe_dn: pointer to a "Partionable Endpoint" device node. - * This is the top-level structure on which pci - * bus resets can be performed. - */ - -static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) +static int eeh_reset_device(struct eeh_dev *edev, struct pci_bus *bus) { struct device_node *dn; int cnt, rc; /* pcibios will clear the counter; save the value */ - cnt = pe_dn->eeh_freeze_count; + cnt = edev->freeze_count; if (bus) pcibios_remove_pci_devices(bus); /* Reset the pci controller. (Asserts RST#; resets config space). * Reconfigure bridges and devices. Don't try to bring the system - * up if the reset failed for some reason. */ - rc = rtas_set_slot_reset(pe_dn); + * up if the reset failed for some reason. + */ + rc = eeh_reset_pe(edev); if (rc) return rc; - /* Walk over all functions on this device. */ - dn = pe_dn->node; - if (!pcibios_find_pci_bus(dn) && PCI_DN(dn->parent)) + /* Walk over all functions on this device. */ + dn = eeh_dev_to_of_node(edev); + if (!pcibios_find_pci_bus(dn) && of_node_to_eeh_dev(dn->parent)) dn = dn->parent->child; while (dn) { - struct pci_dn *ppe = PCI_DN(dn); + struct eeh_dev *pedev = of_node_to_eeh_dev(dn); + /* On Power4, always true because eeh_pe_config_addr=0 */ - if (pe_dn->eeh_pe_config_addr == ppe->eeh_pe_config_addr) { - rtas_configure_bridge(ppe); - eeh_restore_bars(ppe); + if (edev->pe_config_addr == pedev->pe_config_addr) { + eeh_ops->configure_bridge(dn); + eeh_restore_bars(pedev); } dn = dn->sibling; } @@ -308,10 +319,10 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) * potentially weird things happen. */ if (bus) { - ssleep (5); + ssleep(5); pcibios_add_pci_devices(bus); } - pe_dn->eeh_freeze_count = cnt; + edev->freeze_count = cnt; return 0; } @@ -321,23 +332,39 @@ static int eeh_reset_device (struct pci_dn *pe_dn, struct pci_bus *bus) */ #define MAX_WAIT_FOR_RECOVERY 150 -struct pci_dn * handle_eeh_events (struct eeh_event *event) +/** + * eeh_handle_event - Reset a PCI device after hard lockup. + * @event: EEH event + * + * While PHB detects address or data parity errors on particular PCI + * slot, the associated PE will be frozen. Besides, DMA's occurring + * to wild addresses (which usually happen due to bugs in device + * drivers or in PCI adapter firmware) can cause EEH error. #SERR, + * #PERR or other misc PCI-related errors also can trigger EEH errors. + * + * Recovery process consists of unplugging the device driver (which + * generated hotplug events to userspace), then issuing a PCI #RST to + * the device, then reconfiguring the PCI config space for all bridges + * & devices under this slot, and then finally restarting the device + * drivers (which cause a second set of hotplug events to go out to + * userspace). + */ +struct eeh_dev *handle_eeh_events(struct eeh_event *event) { struct device_node *frozen_dn; - struct pci_dn *frozen_pdn; + struct eeh_dev *frozen_edev; struct pci_bus *frozen_bus; int rc = 0; enum pci_ers_result result = PCI_ERS_RESULT_NONE; const char *location, *pci_str, *drv_str, *bus_pci_str, *bus_drv_str; - frozen_dn = find_device_pe(event->dn); + frozen_dn = eeh_find_device_pe(eeh_dev_to_of_node(event->edev)); if (!frozen_dn) { - - location = of_get_property(event->dn, "ibm,loc-code", NULL); + location = of_get_property(eeh_dev_to_of_node(event->edev), "ibm,loc-code", NULL); location = location ? location : "unknown"; printk(KERN_ERR "EEH: Error: Cannot find partition endpoint " "for location=%s pci addr=%s\n", - location, eeh_pci_name(event->dev)); + location, eeh_pci_name(eeh_dev_to_pci_dev(event->edev))); return NULL; } @@ -350,9 +377,10 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) * which was always an EADS pci bridge. In the new style, * there might not be any EADS bridges, and even when there are, * the firmware marks them as "EEH incapable". So another - * two-step is needed to find the pci bus.. */ + * two-step is needed to find the pci bus.. + */ if (!frozen_bus) - frozen_bus = pcibios_find_pci_bus (frozen_dn->parent); + frozen_bus = pcibios_find_pci_bus(frozen_dn->parent); if (!frozen_bus) { printk(KERN_ERR "EEH: Cannot find PCI bus " @@ -361,22 +389,21 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) return NULL; } - frozen_pdn = PCI_DN(frozen_dn); - frozen_pdn->eeh_freeze_count++; + frozen_edev = of_node_to_eeh_dev(frozen_dn); + frozen_edev->freeze_count++; + pci_str = eeh_pci_name(eeh_dev_to_pci_dev(event->edev)); + drv_str = eeh_pcid_name(eeh_dev_to_pci_dev(event->edev)); - pci_str = eeh_pci_name(event->dev); - drv_str = pcid_name(event->dev); - - if (frozen_pdn->eeh_freeze_count > EEH_MAX_ALLOWED_FREEZES) + if (frozen_edev->freeze_count > EEH_MAX_ALLOWED_FREEZES) goto excess_failures; printk(KERN_WARNING "EEH: This PCI device has failed %d times in the last hour:\n", - frozen_pdn->eeh_freeze_count); + frozen_edev->freeze_count); - if (frozen_pdn->pcidev) { - bus_pci_str = pci_name(frozen_pdn->pcidev); - bus_drv_str = pcid_name(frozen_pdn->pcidev); + if (frozen_edev->pdev) { + bus_pci_str = pci_name(frozen_edev->pdev); + bus_drv_str = eeh_pcid_name(frozen_edev->pdev); printk(KERN_WARNING "EEH: Bus location=%s driver=%s pci addr=%s\n", location, bus_drv_str, bus_pci_str); @@ -395,9 +422,10 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) pci_walk_bus(frozen_bus, eeh_report_error, &result); /* Get the current PCI slot state. This can take a long time, - * sometimes over 3 seconds for certain systems. */ - rc = eeh_wait_for_slot_status (frozen_pdn, MAX_WAIT_FOR_RECOVERY*1000); - if (rc < 0) { + * sometimes over 3 seconds for certain systems. + */ + rc = eeh_ops->wait_state(eeh_dev_to_of_node(frozen_edev), MAX_WAIT_FOR_RECOVERY*1000); + if (rc < 0 || rc == EEH_STATE_NOT_SUPPORT) { printk(KERN_WARNING "EEH: Permanent failure\n"); goto hard_fail; } @@ -406,14 +434,14 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) * don't post the error log until after all dev drivers * have been informed. */ - eeh_slot_error_detail(frozen_pdn, EEH_LOG_TEMP_FAILURE); + eeh_slot_error_detail(frozen_edev, EEH_LOG_TEMP); /* If all device drivers were EEH-unaware, then shut * down all of the device drivers, and hope they * go down willingly, without panicing the system. */ if (result == PCI_ERS_RESULT_NONE) { - rc = eeh_reset_device(frozen_pdn, frozen_bus); + rc = eeh_reset_device(frozen_edev, frozen_bus); if (rc) { printk(KERN_WARNING "EEH: Unable to reset, rc=%d\n", rc); goto hard_fail; @@ -422,7 +450,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) /* If all devices reported they can proceed, then re-enable MMIO */ if (result == PCI_ERS_RESULT_CAN_RECOVER) { - rc = rtas_pci_enable(frozen_pdn, EEH_THAW_MMIO); + rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_MMIO); if (rc < 0) goto hard_fail; @@ -436,7 +464,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) /* If all devices reported they can proceed, then re-enable DMA */ if (result == PCI_ERS_RESULT_CAN_RECOVER) { - rc = rtas_pci_enable(frozen_pdn, EEH_THAW_DMA); + rc = eeh_pci_enable(frozen_edev, EEH_OPT_THAW_DMA); if (rc < 0) goto hard_fail; @@ -454,7 +482,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) /* If any device called out for a reset, then reset the slot */ if (result == PCI_ERS_RESULT_NEED_RESET) { - rc = eeh_reset_device(frozen_pdn, NULL); + rc = eeh_reset_device(frozen_edev, NULL); if (rc) { printk(KERN_WARNING "EEH: Cannot reset, rc=%d\n", rc); goto hard_fail; @@ -473,7 +501,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) /* Tell all device drivers that they can resume operations */ pci_walk_bus(frozen_bus, eeh_report_resume, NULL); - return frozen_pdn; + return frozen_edev; excess_failures: /* @@ -486,7 +514,7 @@ excess_failures: "has failed %d times in the last hour " "and has been permanently disabled.\n" "Please try reseating this device or replacing it.\n", - location, drv_str, pci_str, frozen_pdn->eeh_freeze_count); + location, drv_str, pci_str, frozen_edev->freeze_count); goto perm_error; hard_fail: @@ -497,7 +525,7 @@ hard_fail: location, drv_str, pci_str); perm_error: - eeh_slot_error_detail(frozen_pdn, EEH_LOG_PERM_FAILURE); + eeh_slot_error_detail(frozen_edev, EEH_LOG_PERM); /* Notify all devices that they're about to go down. */ pci_walk_bus(frozen_bus, eeh_report_failure, NULL); @@ -508,4 +536,3 @@ perm_error: return NULL; } -/* ---------- end of file ---------- */ diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index d2383cfb6df..4a475256585 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -1,6 +1,4 @@ /* - * eeh_event.c - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -46,7 +44,7 @@ DECLARE_WORK(eeh_event_wq, eeh_thread_launcher); DEFINE_MUTEX(eeh_event_mutex); /** - * eeh_event_handler - dispatch EEH events. + * eeh_event_handler - Dispatch EEH events. * @dummy - unused * * The detection of a frozen slot can occur inside an interrupt, @@ -58,10 +56,10 @@ DEFINE_MUTEX(eeh_event_mutex); static int eeh_event_handler(void * dummy) { unsigned long flags; - struct eeh_event *event; - struct pci_dn *pdn; + struct eeh_event *event; + struct eeh_dev *edev; - daemonize ("eehd"); + daemonize("eehd"); set_current_state(TASK_INTERRUPTIBLE); spin_lock_irqsave(&eeh_eventlist_lock, flags); @@ -79,31 +77,37 @@ static int eeh_event_handler(void * dummy) /* Serialize processing of EEH events */ mutex_lock(&eeh_event_mutex); - eeh_mark_slot(event->dn, EEH_MODE_RECOVERING); + edev = event->edev; + eeh_mark_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING); printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", - eeh_pci_name(event->dev)); + eeh_pci_name(edev->pdev)); + + edev = handle_eeh_events(event); - pdn = handle_eeh_events(event); + eeh_clear_slot(eeh_dev_to_of_node(edev), EEH_MODE_RECOVERING); + pci_dev_put(edev->pdev); - eeh_clear_slot(event->dn, EEH_MODE_RECOVERING); - pci_dev_put(event->dev); kfree(event); mutex_unlock(&eeh_event_mutex); /* If there are no new errors after an hour, clear the counter. */ - if (pdn && pdn->eeh_freeze_count>0) { - msleep_interruptible (3600*1000); - if (pdn->eeh_freeze_count>0) - pdn->eeh_freeze_count--; + if (edev && edev->freeze_count>0) { + msleep_interruptible(3600*1000); + if (edev->freeze_count>0) + edev->freeze_count--; + } return 0; } /** - * eeh_thread_launcher + * eeh_thread_launcher - Start kernel thread to handle EEH events * @dummy - unused + * + * This routine is called to start the kernel thread for processing + * EEH event. */ static void eeh_thread_launcher(struct work_struct *dummy) { @@ -112,18 +116,18 @@ static void eeh_thread_launcher(struct work_struct *dummy) } /** - * eeh_send_failure_event - generate a PCI error event - * @dev pci device + * eeh_send_failure_event - Generate a PCI error event + * @edev: EEH device * * This routine can be called within an interrupt context; * the actual event will be delivered in a normal context * (from a workqueue). */ -int eeh_send_failure_event (struct device_node *dn, - struct pci_dev *dev) +int eeh_send_failure_event(struct eeh_dev *edev) { unsigned long flags; struct eeh_event *event; + struct device_node *dn = eeh_dev_to_of_node(edev); const char *location; if (!mem_init_done) { @@ -135,15 +139,14 @@ int eeh_send_failure_event (struct device_node *dn, } event = kmalloc(sizeof(*event), GFP_ATOMIC); if (event == NULL) { - printk (KERN_ERR "EEH: out of memory, event not handled\n"); + printk(KERN_ERR "EEH: out of memory, event not handled\n"); return 1; } - if (dev) - pci_dev_get(dev); + if (edev->pdev) + pci_dev_get(edev->pdev); - event->dn = dn; - event->dev = dev; + event->edev = edev; /* We may or may not be called in an interrupt context */ spin_lock_irqsave(&eeh_eventlist_lock, flags); @@ -154,5 +157,3 @@ int eeh_send_failure_event (struct device_node *dn, return 0; } - -/********************** END OF FILE ******************************/ diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c new file mode 100644 index 00000000000..8752f79a6af --- /dev/null +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -0,0 +1,565 @@ +/* + * The file intends to implement the platform dependent EEH operations on pseries. + * Actually, the pseries platform is built based on RTAS heavily. That means the + * pseries platform dependent EEH operations will be built on RTAS calls. The functions + * are devired from arch/powerpc/platforms/pseries/eeh.c and necessary cleanup has + * been done. + * + * Copyright Benjamin Herrenschmidt & Gavin Shan, IBM Corporation 2011. + * Copyright IBM Corporation 2001, 2005, 2006 + * Copyright Dave Engebretsen & Todd Inglett 2001 + * Copyright Linas Vepstas 2005, 2006 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/atomic.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/of.h> +#include <linux/pci.h> +#include <linux/proc_fs.h> +#include <linux/rbtree.h> +#include <linux/sched.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> + +#include <asm/eeh.h> +#include <asm/eeh_event.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/ppc-pci.h> +#include <asm/rtas.h> + +/* RTAS tokens */ +static int ibm_set_eeh_option; +static int ibm_set_slot_reset; +static int ibm_read_slot_reset_state; +static int ibm_read_slot_reset_state2; +static int ibm_slot_error_detail; +static int ibm_get_config_addr_info; +static int ibm_get_config_addr_info2; +static int ibm_configure_bridge; +static int ibm_configure_pe; + +/* + * Buffer for reporting slot-error-detail rtas calls. Its here + * in BSS, and not dynamically alloced, so that it ends up in + * RMO where RTAS can access it. + */ +static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; +static DEFINE_SPINLOCK(slot_errbuf_lock); +static int eeh_error_buf_size; + +/** + * pseries_eeh_init - EEH platform dependent initialization + * + * EEH platform dependent initialization on pseries. + */ +static int pseries_eeh_init(void) +{ + /* figure out EEH RTAS function call tokens */ + ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); + ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); + ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); + ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); + ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); + ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); + ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); + ibm_configure_pe = rtas_token("ibm,configure-pe"); + ibm_configure_bridge = rtas_token ("ibm,configure-bridge"); + + /* necessary sanity check */ + if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm,set-eeh-option> invalid\n", + __func__); + return -EINVAL; + } else if (ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm, set-slot-reset> invalid\n", + __func__); + return -EINVAL; + } else if (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && + ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm,read-slot-reset-state2> and " + "<ibm,read-slot-reset-state> invalid\n", + __func__); + return -EINVAL; + } else if (ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm,slot-error-detail> invalid\n", + __func__); + return -EINVAL; + } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE && + ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm,get-config-addr-info2> and " + "<ibm,get-config-addr-info> invalid\n", + __func__); + return -EINVAL; + } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && + ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: RTAS service <ibm,configure-pe> and " + "<ibm,configure-bridge> invalid\n", + __func__); + return -EINVAL; + } + + /* Initialize error log lock and size */ + spin_lock_init(&slot_errbuf_lock); + eeh_error_buf_size = rtas_token("rtas-error-log-max"); + if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { + pr_warning("%s: unknown EEH error log size\n", + __func__); + eeh_error_buf_size = 1024; + } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { + pr_warning("%s: EEH error log size %d exceeds the maximal %d\n", + __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX); + eeh_error_buf_size = RTAS_ERROR_LOG_MAX; + } + + return 0; +} + +/** + * pseries_eeh_set_option - Initialize EEH or MMIO/DMA reenable + * @dn: device node + * @option: operation to be issued + * + * The function is used to control the EEH functionality globally. + * Currently, following options are support according to PAPR: + * Enable EEH, Disable EEH, Enable MMIO and Enable DMA + */ +static int pseries_eeh_set_option(struct device_node *dn, int option) +{ + int ret = 0; + struct eeh_dev *edev; + const u32 *reg; + int config_addr; + + edev = of_node_to_eeh_dev(dn); + + /* + * When we're enabling or disabling EEH functioality on + * the particular PE, the PE config address is possibly + * unavailable. Therefore, we have to figure it out from + * the FDT node. + */ + switch (option) { + case EEH_OPT_DISABLE: + case EEH_OPT_ENABLE: + reg = of_get_property(dn, "reg", NULL); + config_addr = reg[0]; + break; + + case EEH_OPT_THAW_MMIO: + case EEH_OPT_THAW_DMA: + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; + break; + + default: + pr_err("%s: Invalid option %d\n", + __func__, option); + return -EINVAL; + } + + ret = rtas_call(ibm_set_eeh_option, 4, 1, NULL, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), option); + + return ret; +} + +/** + * pseries_eeh_get_pe_addr - Retrieve PE address + * @dn: device node + * + * Retrieve the assocated PE address. Actually, there're 2 RTAS + * function calls dedicated for the purpose. We need implement + * it through the new function and then the old one. Besides, + * you should make sure the config address is figured out from + * FDT node before calling the function. + * + * It's notable that zero'ed return value means invalid PE config + * address. + */ +static int pseries_eeh_get_pe_addr(struct device_node *dn) +{ + struct eeh_dev *edev; + int ret = 0; + int rets[3]; + + edev = of_node_to_eeh_dev(dn); + + if (ibm_get_config_addr_info2 != RTAS_UNKNOWN_SERVICE) { + /* + * First of all, we need to make sure there has one PE + * associated with the device. Otherwise, PE address is + * meaningless. + */ + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 1); + if (ret || (rets[0] == 0)) + return 0; + + /* Retrieve the associated PE config address */ + ret = rtas_call(ibm_get_config_addr_info2, 4, 2, rets, + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 0); + if (ret) { + pr_warning("%s: Failed to get PE address for %s\n", + __func__, dn->full_name); + return 0; + } + + return rets[0]; + } + + if (ibm_get_config_addr_info != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_get_config_addr_info, 4, 2, rets, + edev->config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), 0); + if (ret) { + pr_warning("%s: Failed to get PE address for %s\n", + __func__, dn->full_name); + return 0; + } + + return rets[0]; + } + + return ret; +} + +/** + * pseries_eeh_get_state - Retrieve PE state + * @dn: PE associated device node + * @state: return value + * + * Retrieve the state of the specified PE. On RTAS compliant + * pseries platform, there already has one dedicated RTAS function + * for the purpose. It's notable that the associated PE config address + * might be ready when calling the function. Therefore, endeavour to + * use the PE config address if possible. Further more, there're 2 + * RTAS calls for the purpose, we need to try the new one and back + * to the old one if the new one couldn't work properly. + */ +static int pseries_eeh_get_state(struct device_node *dn, int *state) +{ + struct eeh_dev *edev; + int config_addr; + int ret; + int rets[4]; + int result; + + /* Figure out PE config address if possible */ + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; + + if (ibm_read_slot_reset_state2 != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_read_slot_reset_state2, 3, 4, rets, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); + } else if (ibm_read_slot_reset_state != RTAS_UNKNOWN_SERVICE) { + /* Fake PE unavailable info */ + rets[2] = 0; + ret = rtas_call(ibm_read_slot_reset_state, 3, 3, rets, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); + } else { + return EEH_STATE_NOT_SUPPORT; + } + + if (ret) + return ret; + + /* Parse the result out */ + result = 0; + if (rets[1]) { + switch(rets[0]) { + case 0: + result &= ~EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + break; + case 1: + result |= EEH_STATE_RESET_ACTIVE; + result |= EEH_STATE_MMIO_ACTIVE; + result |= EEH_STATE_DMA_ACTIVE; + break; + case 2: + result &= ~EEH_STATE_RESET_ACTIVE; + result &= ~EEH_STATE_MMIO_ACTIVE; + result &= ~EEH_STATE_DMA_ACTIVE; + break; + case 4: + result &= ~EEH_STATE_RESET_ACTIVE; + result &= ~EEH_STATE_MMIO_ACTIVE; + result &= ~EEH_STATE_DMA_ACTIVE; + result |= EEH_STATE_MMIO_ENABLED; + break; + case 5: + if (rets[2]) { + if (state) *state = rets[2]; + result = EEH_STATE_UNAVAILABLE; + } else { + result = EEH_STATE_NOT_SUPPORT; + } + default: + result = EEH_STATE_NOT_SUPPORT; + } + } else { + result = EEH_STATE_NOT_SUPPORT; + } + + return result; +} + +/** + * pseries_eeh_reset - Reset the specified PE + * @dn: PE associated device node + * @option: reset option + * + * Reset the specified PE + */ +static int pseries_eeh_reset(struct device_node *dn, int option) +{ + struct eeh_dev *edev; + int config_addr; + int ret; + + /* Figure out PE address */ + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; + + /* Reset PE through RTAS call */ + ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), option); + + /* If fundamental-reset not supported, try hot-reset */ + if (option == EEH_RESET_FUNDAMENTAL && + ret == -8) { + ret = rtas_call(ibm_set_slot_reset, 4, 1, NULL, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid), EEH_RESET_HOT); + } + + return ret; +} + +/** + * pseries_eeh_wait_state - Wait for PE state + * @dn: PE associated device node + * @max_wait: maximal period in microsecond + * + * Wait for the state of associated PE. It might take some time + * to retrieve the PE's state. + */ +static int pseries_eeh_wait_state(struct device_node *dn, int max_wait) +{ + int ret; + int mwait; + + /* + * According to PAPR, the state of PE might be temporarily + * unavailable. Under the circumstance, we have to wait + * for indicated time determined by firmware. The maximal + * wait time is 5 minutes, which is acquired from the original + * EEH implementation. Also, the original implementation + * also defined the minimal wait time as 1 second. + */ +#define EEH_STATE_MIN_WAIT_TIME (1000) +#define EEH_STATE_MAX_WAIT_TIME (300 * 1000) + + while (1) { + ret = pseries_eeh_get_state(dn, &mwait); + + /* + * If the PE's state is temporarily unavailable, + * we have to wait for the specified time. Otherwise, + * the PE's state will be returned immediately. + */ + if (ret != EEH_STATE_UNAVAILABLE) + return ret; + + if (max_wait <= 0) { + pr_warning("%s: Timeout when getting PE's state (%d)\n", + __func__, max_wait); + return EEH_STATE_NOT_SUPPORT; + } + + if (mwait <= 0) { + pr_warning("%s: Firmware returned bad wait value %d\n", + __func__, mwait); + mwait = EEH_STATE_MIN_WAIT_TIME; + } else if (mwait > EEH_STATE_MAX_WAIT_TIME) { + pr_warning("%s: Firmware returned too long wait value %d\n", + __func__, mwait); + mwait = EEH_STATE_MAX_WAIT_TIME; + } + + max_wait -= mwait; + msleep(mwait); + } + + return EEH_STATE_NOT_SUPPORT; +} + +/** + * pseries_eeh_get_log - Retrieve error log + * @dn: device node + * @severity: temporary or permanent error log + * @drv_log: driver log to be combined with retrieved error log + * @len: length of driver log + * + * Retrieve the temporary or permanent error from the PE. + * Actually, the error will be retrieved through the dedicated + * RTAS call. + */ +static int pseries_eeh_get_log(struct device_node *dn, int severity, char *drv_log, unsigned long len) +{ + struct eeh_dev *edev; + int config_addr; + unsigned long flags; + int ret; + + edev = of_node_to_eeh_dev(dn); + spin_lock_irqsave(&slot_errbuf_lock, flags); + memset(slot_errbuf, 0, eeh_error_buf_size); + + /* Figure out the PE address */ + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; + + ret = rtas_call(ibm_slot_error_detail, 8, 1, NULL, config_addr, + BUID_HI(edev->phb->buid), BUID_LO(edev->phb->buid), + virt_to_phys(drv_log), len, + virt_to_phys(slot_errbuf), eeh_error_buf_size, + severity); + if (!ret) + log_error(slot_errbuf, ERR_TYPE_RTAS_LOG, 0); + spin_unlock_irqrestore(&slot_errbuf_lock, flags); + + return ret; +} + +/** + * pseries_eeh_configure_bridge - Configure PCI bridges in the indicated PE + * @dn: PE associated device node + * + * The function will be called to reconfigure the bridges included + * in the specified PE so that the mulfunctional PE would be recovered + * again. + */ +static int pseries_eeh_configure_bridge(struct device_node *dn) +{ + struct eeh_dev *edev; + int config_addr; + int ret; + + /* Figure out the PE address */ + edev = of_node_to_eeh_dev(dn); + config_addr = edev->config_addr; + if (edev->pe_config_addr) + config_addr = edev->pe_config_addr; + + /* Use new configure-pe function, if supported */ + if (ibm_configure_pe != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_pe, 3, 1, NULL, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); + } else if (ibm_configure_bridge != RTAS_UNKNOWN_SERVICE) { + ret = rtas_call(ibm_configure_bridge, 3, 1, NULL, + config_addr, BUID_HI(edev->phb->buid), + BUID_LO(edev->phb->buid)); + } else { + return -EFAULT; + } + + if (ret) + pr_warning("%s: Unable to configure bridge %d for %s\n", + __func__, ret, dn->full_name); + + return ret; +} + +/** + * pseries_eeh_read_config - Read PCI config space + * @dn: device node + * @where: PCI address + * @size: size to read + * @val: return value + * + * Read config space from the speicifed device + */ +static int pseries_eeh_read_config(struct device_node *dn, int where, int size, u32 *val) +{ + struct pci_dn *pdn; + + pdn = PCI_DN(dn); + + return rtas_read_config(pdn, where, size, val); +} + +/** + * pseries_eeh_write_config - Write PCI config space + * @dn: device node + * @where: PCI address + * @size: size to write + * @val: value to be written + * + * Write config space to the specified device + */ +static int pseries_eeh_write_config(struct device_node *dn, int where, int size, u32 val) +{ + struct pci_dn *pdn; + + pdn = PCI_DN(dn); + + return rtas_write_config(pdn, where, size, val); +} + +static struct eeh_ops pseries_eeh_ops = { + .name = "pseries", + .init = pseries_eeh_init, + .set_option = pseries_eeh_set_option, + .get_pe_addr = pseries_eeh_get_pe_addr, + .get_state = pseries_eeh_get_state, + .reset = pseries_eeh_reset, + .wait_state = pseries_eeh_wait_state, + .get_log = pseries_eeh_get_log, + .configure_bridge = pseries_eeh_configure_bridge, + .read_config = pseries_eeh_read_config, + .write_config = pseries_eeh_write_config +}; + +/** + * eeh_pseries_init - Register platform dependent EEH operations + * + * EEH initialization on pseries platform. This function should be + * called before any EEH related functions. + */ +int __init eeh_pseries_init(void) +{ + return eeh_ops_register(&pseries_eeh_ops); +} diff --git a/arch/powerpc/platforms/pseries/eeh_sysfs.c b/arch/powerpc/platforms/pseries/eeh_sysfs.c index eb744ee234d..243b3510d70 100644 --- a/arch/powerpc/platforms/pseries/eeh_sysfs.c +++ b/arch/powerpc/platforms/pseries/eeh_sysfs.c @@ -28,7 +28,7 @@ #include <asm/pci-bridge.h> /** - * EEH_SHOW_ATTR -- create sysfs entry for eeh statistic + * EEH_SHOW_ATTR -- Create sysfs entry for eeh statistic * @_name: name of file in sysfs directory * @_memb: name of member in struct pci_dn to access * @_format: printf format for display @@ -41,24 +41,21 @@ static ssize_t eeh_show_##_name(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct pci_dev *pdev = to_pci_dev(dev); \ - struct device_node *dn = pci_device_to_OF_node(pdev); \ - struct pci_dn *pdn; \ + struct eeh_dev *edev = pci_dev_to_eeh_dev(pdev); \ \ - if (!dn || PCI_DN(dn) == NULL) \ - return 0; \ + if (!edev) \ + return 0; \ \ - pdn = PCI_DN(dn); \ - return sprintf(buf, _format "\n", pdn->_memb); \ + return sprintf(buf, _format "\n", edev->_memb); \ } \ static DEVICE_ATTR(_name, S_IRUGO, eeh_show_##_name, NULL); - -EEH_SHOW_ATTR(eeh_mode, eeh_mode, "0x%x"); -EEH_SHOW_ATTR(eeh_config_addr, eeh_config_addr, "0x%x"); -EEH_SHOW_ATTR(eeh_pe_config_addr, eeh_pe_config_addr, "0x%x"); -EEH_SHOW_ATTR(eeh_check_count, eeh_check_count, "%d"); -EEH_SHOW_ATTR(eeh_freeze_count, eeh_freeze_count, "%d"); -EEH_SHOW_ATTR(eeh_false_positives, eeh_false_positives, "%d"); +EEH_SHOW_ATTR(eeh_mode, mode, "0x%x"); +EEH_SHOW_ATTR(eeh_config_addr, config_addr, "0x%x"); +EEH_SHOW_ATTR(eeh_pe_config_addr, pe_config_addr, "0x%x"); +EEH_SHOW_ATTR(eeh_check_count, check_count, "%d" ); +EEH_SHOW_ATTR(eeh_freeze_count, freeze_count, "%d" ); +EEH_SHOW_ATTR(eeh_false_positives, false_positives, "%d" ); void eeh_sysfs_add_device(struct pci_dev *pdev) { diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 7bc73af6c7b..5f3ef876ded 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -41,6 +41,7 @@ #include <asm/udbg.h> #include <asm/smp.h> #include <asm/trace.h> +#include <asm/firmware.h> #include "plpar_wrappers.h" #include "pseries.h" diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c index 38d24e7e7bb..109fdb75578 100644 --- a/arch/powerpc/platforms/pseries/msi.c +++ b/arch/powerpc/platforms/pseries/msi.c @@ -217,7 +217,7 @@ static struct device_node *find_pe_dn(struct pci_dev *dev, int *total) if (!dn) return NULL; - dn = find_device_pe(dn); + dn = eeh_find_device_pe(dn); if (!dn) return NULL; diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 55d4ec1bd1a..fbb21fc3080 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -147,6 +147,9 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) pci_devs_phb_init_dynamic(phb); + /* Create EEH devices for the PHB */ + eeh_dev_phb_init_dynamic(phb); + if (dn->child) eeh_add_device_tree_early(dn); diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c deleted file mode 100644 index 6e7742da007..00000000000 --- a/arch/powerpc/platforms/pseries/phyp_dump.c +++ /dev/null @@ -1,513 +0,0 @@ -/* - * Hypervisor-assisted dump - * - * Linas Vepstas, Manish Ahuja 2008 - * Copyright 2008 IBM Corp. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - */ - -#include <linux/gfp.h> -#include <linux/init.h> -#include <linux/kobject.h> -#include <linux/mm.h> -#include <linux/of.h> -#include <linux/pfn.h> -#include <linux/swap.h> -#include <linux/sysfs.h> - -#include <asm/page.h> -#include <asm/phyp_dump.h> -#include <asm/machdep.h> -#include <asm/prom.h> -#include <asm/rtas.h> - -/* Variables, used to communicate data between early boot and late boot */ -static struct phyp_dump phyp_dump_vars; -struct phyp_dump *phyp_dump_info = &phyp_dump_vars; - -static int ibm_configure_kernel_dump; -/* ------------------------------------------------- */ -/* RTAS interfaces to declare the dump regions */ - -struct dump_section { - u32 dump_flags; - u16 source_type; - u16 error_flags; - u64 source_address; - u64 source_length; - u64 length_copied; - u64 destination_address; -}; - -struct phyp_dump_header { - u32 version; - u16 num_of_sections; - u16 status; - - u32 first_offset_section; - u32 dump_disk_section; - u64 block_num_dd; - u64 num_of_blocks_dd; - u32 offset_dd; - u32 maxtime_to_auto; - /* No dump disk path string used */ - - struct dump_section cpu_data; - struct dump_section hpte_data; - struct dump_section kernel_data; -}; - -/* The dump header *must be* in low memory, so .bss it */ -static struct phyp_dump_header phdr; - -#define NUM_DUMP_SECTIONS 3 -#define DUMP_HEADER_VERSION 0x1 -#define DUMP_REQUEST_FLAG 0x1 -#define DUMP_SOURCE_CPU 0x0001 -#define DUMP_SOURCE_HPTE 0x0002 -#define DUMP_SOURCE_RMO 0x0011 -#define DUMP_ERROR_FLAG 0x2000 -#define DUMP_TRIGGERED 0x4000 -#define DUMP_PERFORMED 0x8000 - - -/** - * init_dump_header() - initialize the header declaring a dump - * Returns: length of dump save area. - * - * When the hypervisor saves crashed state, it needs to put - * it somewhere. The dump header tells the hypervisor where - * the data can be saved. - */ -static unsigned long init_dump_header(struct phyp_dump_header *ph) -{ - unsigned long addr_offset = 0; - - /* Set up the dump header */ - ph->version = DUMP_HEADER_VERSION; - ph->num_of_sections = NUM_DUMP_SECTIONS; - ph->status = 0; - - ph->first_offset_section = - (u32)offsetof(struct phyp_dump_header, cpu_data); - ph->dump_disk_section = 0; - ph->block_num_dd = 0; - ph->num_of_blocks_dd = 0; - ph->offset_dd = 0; - - ph->maxtime_to_auto = 0; /* disabled */ - - /* The first two sections are mandatory */ - ph->cpu_data.dump_flags = DUMP_REQUEST_FLAG; - ph->cpu_data.source_type = DUMP_SOURCE_CPU; - ph->cpu_data.source_address = 0; - ph->cpu_data.source_length = phyp_dump_info->cpu_state_size; - ph->cpu_data.destination_address = addr_offset; - addr_offset += phyp_dump_info->cpu_state_size; - - ph->hpte_data.dump_flags = DUMP_REQUEST_FLAG; - ph->hpte_data.source_type = DUMP_SOURCE_HPTE; - ph->hpte_data.source_address = 0; - ph->hpte_data.source_length = phyp_dump_info->hpte_region_size; - ph->hpte_data.destination_address = addr_offset; - addr_offset += phyp_dump_info->hpte_region_size; - - /* This section describes the low kernel region */ - ph->kernel_data.dump_flags = DUMP_REQUEST_FLAG; - ph->kernel_data.source_type = DUMP_SOURCE_RMO; - ph->kernel_data.source_address = PHYP_DUMP_RMR_START; - ph->kernel_data.source_length = PHYP_DUMP_RMR_END; - ph->kernel_data.destination_address = addr_offset; - addr_offset += ph->kernel_data.source_length; - - return addr_offset; -} - -static void print_dump_header(const struct phyp_dump_header *ph) -{ -#ifdef DEBUG - if (ph == NULL) - return; - - printk(KERN_INFO "dump header:\n"); - /* setup some ph->sections required */ - printk(KERN_INFO "version = %d\n", ph->version); - printk(KERN_INFO "Sections = %d\n", ph->num_of_sections); - printk(KERN_INFO "Status = 0x%x\n", ph->status); - - /* No ph->disk, so all should be set to 0 */ - printk(KERN_INFO "Offset to first section 0x%x\n", - ph->first_offset_section); - printk(KERN_INFO "dump disk sections should be zero\n"); - printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section); - printk(KERN_INFO "block num = %lld\n", ph->block_num_dd); - printk(KERN_INFO "number of blocks = %lld\n", ph->num_of_blocks_dd); - printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd); - printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto); - - /*set cpu state and hpte states as well scratch pad area */ - printk(KERN_INFO " CPU AREA\n"); - printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags); - printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type); - printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags); - printk(KERN_INFO "cpu source_address =%llx\n", - ph->cpu_data.source_address); - printk(KERN_INFO "cpu source_length =%llx\n", - ph->cpu_data.source_length); - printk(KERN_INFO "cpu length_copied =%llx\n", - ph->cpu_data.length_copied); - - printk(KERN_INFO " HPTE AREA\n"); - printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags); - printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type); - printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags); - printk(KERN_INFO "HPTE source_address =%llx\n", - ph->hpte_data.source_address); - printk(KERN_INFO "HPTE source_length =%llx\n", - ph->hpte_data.source_length); - printk(KERN_INFO "HPTE length_copied =%llx\n", - ph->hpte_data.length_copied); - - printk(KERN_INFO " SRSD AREA\n"); - printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags); - printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type); - printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags); - printk(KERN_INFO "SRSD source_address =%llx\n", - ph->kernel_data.source_address); - printk(KERN_INFO "SRSD source_length =%llx\n", - ph->kernel_data.source_length); - printk(KERN_INFO "SRSD length_copied =%llx\n", - ph->kernel_data.length_copied); -#endif -} - -static ssize_t show_phyp_dump_active(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) -{ - - /* create filesystem entry so kdump is phyp-dump aware */ - return sprintf(buf, "%lx\n", phyp_dump_info->phyp_dump_at_boot); -} - -static struct kobj_attribute pdl = __ATTR(phyp_dump_active, 0600, - show_phyp_dump_active, - NULL); - -static void register_dump_area(struct phyp_dump_header *ph, unsigned long addr) -{ - int rc; - - /* Add addr value if not initialized before */ - if (ph->cpu_data.destination_address == 0) { - ph->cpu_data.destination_address += addr; - ph->hpte_data.destination_address += addr; - ph->kernel_data.destination_address += addr; - } - - /* ToDo Invalidate kdump and free memory range. */ - - do { - rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, - 1, ph, sizeof(struct phyp_dump_header)); - } while (rtas_busy_delay(rc)); - - if (rc) { - printk(KERN_ERR "phyp-dump: unexpected error (%d) on " - "register\n", rc); - print_dump_header(ph); - return; - } - - rc = sysfs_create_file(kernel_kobj, &pdl.attr); - if (rc) - printk(KERN_ERR "phyp-dump: unable to create sysfs" - " file (%d)\n", rc); -} - -static -void invalidate_last_dump(struct phyp_dump_header *ph, unsigned long addr) -{ - int rc; - - /* Add addr value if not initialized before */ - if (ph->cpu_data.destination_address == 0) { - ph->cpu_data.destination_address += addr; - ph->hpte_data.destination_address += addr; - ph->kernel_data.destination_address += addr; - } - - do { - rc = rtas_call(ibm_configure_kernel_dump, 3, 1, NULL, - 2, ph, sizeof(struct phyp_dump_header)); - } while (rtas_busy_delay(rc)); - - if (rc) { - printk(KERN_ERR "phyp-dump: unexpected error (%d) " - "on invalidate\n", rc); - print_dump_header(ph); - } -} - -/* ------------------------------------------------- */ -/** - * release_memory_range -- release memory previously memblock_reserved - * @start_pfn: starting physical frame number - * @nr_pages: number of pages to free. - * - * This routine will release memory that had been previously - * memblock_reserved in early boot. The released memory becomes - * available for genreal use. - */ -static void release_memory_range(unsigned long start_pfn, - unsigned long nr_pages) -{ - struct page *rpage; - unsigned long end_pfn; - long i; - - end_pfn = start_pfn + nr_pages; - - for (i = start_pfn; i <= end_pfn; i++) { - rpage = pfn_to_page(i); - if (PageReserved(rpage)) { - ClearPageReserved(rpage); - init_page_count(rpage); - __free_page(rpage); - totalram_pages++; - } - } -} - -/** - * track_freed_range -- Counts the range being freed. - * Once the counter goes to zero, it re-registers dump for - * future use. - */ -static void -track_freed_range(unsigned long addr, unsigned long length) -{ - static unsigned long scratch_area_size, reserved_area_size; - - if (addr < phyp_dump_info->init_reserve_start) - return; - - if ((addr >= phyp_dump_info->init_reserve_start) && - (addr <= phyp_dump_info->init_reserve_start + - phyp_dump_info->init_reserve_size)) - reserved_area_size += length; - - if ((addr >= phyp_dump_info->reserved_scratch_addr) && - (addr <= phyp_dump_info->reserved_scratch_addr + - phyp_dump_info->reserved_scratch_size)) - scratch_area_size += length; - - if ((reserved_area_size == phyp_dump_info->init_reserve_size) && - (scratch_area_size == phyp_dump_info->reserved_scratch_size)) { - - invalidate_last_dump(&phdr, - phyp_dump_info->reserved_scratch_addr); - register_dump_area(&phdr, - phyp_dump_info->reserved_scratch_addr); - } -} - -/* ------------------------------------------------- */ -/** - * sysfs_release_region -- sysfs interface to release memory range. - * - * Usage: - * "echo <start addr> <length> > /sys/kernel/release_region" - * - * Example: - * "echo 0x40000000 0x10000000 > /sys/kernel/release_region" - * - * will release 256MB starting at 1GB. - */ -static ssize_t store_release_region(struct kobject *kobj, - struct kobj_attribute *attr, - const char *buf, size_t count) -{ - unsigned long start_addr, length, end_addr; - unsigned long start_pfn, nr_pages; - ssize_t ret; - - ret = sscanf(buf, "%lx %lx", &start_addr, &length); - if (ret != 2) - return -EINVAL; - - track_freed_range(start_addr, length); - - /* Range-check - don't free any reserved memory that - * wasn't reserved for phyp-dump */ - if (start_addr < phyp_dump_info->init_reserve_start) - start_addr = phyp_dump_info->init_reserve_start; - - end_addr = phyp_dump_info->init_reserve_start + - phyp_dump_info->init_reserve_size; - if (start_addr+length > end_addr) - length = end_addr - start_addr; - - /* Release the region of memory assed in by user */ - start_pfn = PFN_DOWN(start_addr); - nr_pages = PFN_DOWN(length); - release_memory_range(start_pfn, nr_pages); - - return count; -} - -static ssize_t show_release_region(struct kobject *kobj, - struct kobj_attribute *attr, char *buf) -{ - u64 second_addr_range; - - /* total reserved size - start of scratch area */ - second_addr_range = phyp_dump_info->init_reserve_size - - phyp_dump_info->reserved_scratch_size; - return sprintf(buf, "CPU:0x%llx-0x%llx: HPTE:0x%llx-0x%llx:" - " DUMP:0x%llx-0x%llx, 0x%lx-0x%llx:\n", - phdr.cpu_data.destination_address, - phdr.cpu_data.length_copied, - phdr.hpte_data.destination_address, - phdr.hpte_data.length_copied, - phdr.kernel_data.destination_address, - phdr.kernel_data.length_copied, - phyp_dump_info->init_reserve_start, - second_addr_range); -} - -static struct kobj_attribute rr = __ATTR(release_region, 0600, - show_release_region, - store_release_region); - -static int __init phyp_dump_setup(void) -{ - struct device_node *rtas; - const struct phyp_dump_header *dump_header = NULL; - unsigned long dump_area_start; - unsigned long dump_area_length; - int header_len = 0; - int rc; - - /* If no memory was reserved in early boot, there is nothing to do */ - if (phyp_dump_info->init_reserve_size == 0) - return 0; - - /* Return if phyp dump not supported */ - if (!phyp_dump_info->phyp_dump_configured) - return -ENOSYS; - - /* Is there dump data waiting for us? If there isn't, - * then register a new dump area, and release all of - * the rest of the reserved ram. - * - * The /rtas/ibm,kernel-dump rtas node is present only - * if there is dump data waiting for us. - */ - rtas = of_find_node_by_path("/rtas"); - if (rtas) { - dump_header = of_get_property(rtas, "ibm,kernel-dump", - &header_len); - of_node_put(rtas); - } - - ibm_configure_kernel_dump = rtas_token("ibm,configure-kernel-dump"); - - print_dump_header(dump_header); - dump_area_length = init_dump_header(&phdr); - /* align down */ - dump_area_start = phyp_dump_info->init_reserve_start & PAGE_MASK; - - if (dump_header == NULL) { - register_dump_area(&phdr, dump_area_start); - return 0; - } - - /* re-register the dump area, if old dump was invalid */ - if ((dump_header) && (dump_header->status & DUMP_ERROR_FLAG)) { - invalidate_last_dump(&phdr, dump_area_start); - register_dump_area(&phdr, dump_area_start); - return 0; - } - - if (dump_header) { - phyp_dump_info->reserved_scratch_addr = - dump_header->cpu_data.destination_address; - phyp_dump_info->reserved_scratch_size = - dump_header->cpu_data.source_length + - dump_header->hpte_data.source_length + - dump_header->kernel_data.source_length; - } - - /* Should we create a dump_subsys, analogous to s390/ipl.c ? */ - rc = sysfs_create_file(kernel_kobj, &rr.attr); - if (rc) - printk(KERN_ERR "phyp-dump: unable to create sysfs file (%d)\n", - rc); - - /* ToDo: re-register the dump area, for next time. */ - return 0; -} -machine_subsys_initcall(pseries, phyp_dump_setup); - -int __init early_init_dt_scan_phyp_dump(unsigned long node, - const char *uname, int depth, void *data) -{ - const unsigned int *sizes; - - phyp_dump_info->phyp_dump_configured = 0; - phyp_dump_info->phyp_dump_is_active = 0; - - if (depth != 1 || strcmp(uname, "rtas") != 0) - return 0; - - if (of_get_flat_dt_prop(node, "ibm,configure-kernel-dump", NULL)) - phyp_dump_info->phyp_dump_configured++; - - if (of_get_flat_dt_prop(node, "ibm,dump-kernel", NULL)) - phyp_dump_info->phyp_dump_is_active++; - - sizes = of_get_flat_dt_prop(node, "ibm,configure-kernel-dump-sizes", - NULL); - if (!sizes) - return 0; - - if (sizes[0] == 1) - phyp_dump_info->cpu_state_size = *((unsigned long *)&sizes[1]); - - if (sizes[3] == 2) - phyp_dump_info->hpte_region_size = - *((unsigned long *)&sizes[4]); - return 1; -} - -/* Look for phyp_dump= cmdline option */ -static int __init early_phyp_dump_enabled(char *p) -{ - phyp_dump_info->phyp_dump_at_boot = 1; - - if (!p) - return 0; - - if (strncmp(p, "1", 1) == 0) - phyp_dump_info->phyp_dump_at_boot = 1; - else if (strncmp(p, "0", 1) == 0) - phyp_dump_info->phyp_dump_at_boot = 0; - - return 0; -} -early_param("phyp_dump", early_phyp_dump_enabled); - -/* Look for phyp_dump_reserve_size= cmdline option */ -static int __init early_phyp_dump_reserve_size(char *p) -{ - if (p) - phyp_dump_info->reserve_bootvar = memparse(p, &p); - - return 0; -} -early_param("phyp_dump_reserve_size", early_phyp_dump_reserve_size); diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 085fd3f45ad..a12e95af693 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -96,6 +96,20 @@ out: return index; } +static void check_and_cede_processor(void) +{ + /* + * Interrupts are soft-disabled at this point, + * but not hard disabled. So an interrupt might have + * occurred before entering NAP, and would be potentially + * lost (edge events, decrementer events, etc...) unless + * we first hard disable then check. + */ + hard_irq_disable(); + if (get_paca()->irq_happened == 0) + cede_processor(); +} + static int dedicated_cede_loop(struct cpuidle_device *dev, struct cpuidle_driver *drv, int index) @@ -108,7 +122,7 @@ static int dedicated_cede_loop(struct cpuidle_device *dev, ppc64_runlatch_off(); HMT_medium(); - cede_processor(); + check_and_cede_processor(); get_lppaca()->donate_dedicated_cpu = 0; dev->last_residency = @@ -132,7 +146,7 @@ static int shared_cede_loop(struct cpuidle_device *dev, * processor. When returning here, external interrupts * are enabled. */ - cede_processor(); + check_and_cede_processor(); dev->last_residency = (int)idle_loop_epilog(in_purr, kt_before); diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c index f79f1278dfc..8f137af616a 100644 --- a/arch/powerpc/platforms/pseries/setup.c +++ b/arch/powerpc/platforms/pseries/setup.c @@ -190,9 +190,8 @@ static void __init pseries_mpic_init_IRQ(void) BUG_ON(openpic_addr == 0); /* Setup the openpic driver */ - mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, 0, - 16, 250, /* isu size, irq count */ - " MPIC "); + mpic = mpic_alloc(pSeries_mpic_node, openpic_addr, + MPIC_NO_RESET, 16, 0, " MPIC "); BUG_ON(mpic == NULL); /* Add ISUs */ @@ -261,8 +260,12 @@ static int pci_dn_reconfig_notifier(struct notifier_block *nb, unsigned long act switch (action) { case PSERIES_RECONFIG_ADD: pci = np->parent->data; - if (pci) + if (pci) { update_dn_pci_info(np, pci->phb); + + /* Create EEH device for the OF node */ + eeh_dev_init(np, pci->phb); + } break; default: err = NOTIFY_DONE; @@ -382,6 +385,7 @@ static void __init pSeries_setup_arch(void) /* Find and initialize PCI host bridges */ init_pci_config_tokens(); + eeh_pseries_init(); find_and_init_phbs(); pSeries_reconfig_notifier_register(&pci_dn_reconfig_nb); eeh_init(); diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index 7b4df37ac38..a84fecf63c4 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -29,3 +29,7 @@ config SCOM_DEBUGFS bool "Expose SCOM controllers via debugfs" depends on PPC_SCOM default n + +config GE_FPGA + bool + default n diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 5e37b471786..1bd7ecb2462 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -4,6 +4,8 @@ ccflags-$(CONFIG_PPC64) := -mno-minimal-toc mpic-msi-obj-$(CONFIG_PCI_MSI) += mpic_msi.o mpic_u3msi.o mpic_pasemi_msi.o obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) +mpic-msgr-obj-$(CONFIG_MPIC_MSGR) += mpic_msgr.o +obj-$(CONFIG_MPIC) += mpic.o $(mpic-msi-obj-y) $(mpic-msgr-obj-y) obj-$(CONFIG_PPC_EPAPR_HV_PIC) += ehv_pic.o fsl-msi-obj-$(CONFIG_PCI_MSI) += fsl_msi.o obj-$(CONFIG_PPC_MSI_BITMAP) += msi_bitmap.o @@ -65,3 +67,5 @@ obj-$(CONFIG_PPC_SCOM) += scom.o subdir-ccflags-$(CONFIG_PPC_WERROR) := -Werror obj-$(CONFIG_PPC_XICS) += xics/ + +obj-$(CONFIG_GE_FPGA) += ge/ diff --git a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c index 11641589917..37a69097e02 100644 --- a/arch/powerpc/sysdev/fsl_85xx_cache_sram.c +++ b/arch/powerpc/sysdev/fsl_85xx_cache_sram.c @@ -24,6 +24,7 @@ */ #include <linux/kernel.h> +#include <linux/export.h> #include <linux/slab.h> #include <linux/err.h> #include <linux/of_platform.h> diff --git a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c index 5f88797dce7..cedabd0f4bf 100644 --- a/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c +++ b/arch/powerpc/sysdev/fsl_85xx_l2ctlr.c @@ -21,6 +21,7 @@ */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/of_platform.h> #include <asm/io.h> @@ -200,6 +201,9 @@ static struct of_device_id mpc85xx_l2ctlr_of_match[] = { { .compatible = "fsl,p1022-l2-cache-controller", }, + { + .compatible = "fsl,mpc8548-l2-cache-controller", + }, {}, }; diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index 0c01debe963..6e097de00e0 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -410,6 +410,7 @@ static int __devinit fsl_of_msi_probe(struct platform_device *dev) msi->msi_regs = ioremap(res.start, resource_size(&res)); if (!msi->msi_regs) { + err = -ENOMEM; dev_err(&dev->dev, "could not map node %s\n", dev->dev.of_node->full_name); goto error_out; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index a4c4f4a932d..5b6f556094d 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -66,8 +66,8 @@ " li %0,%3\n" \ " b 2b\n" \ ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ + PPC_LONG_ALIGN "\n" \ + PPC_LONG "1b,3b\n" \ ".text" \ : "=r" (err), "=r" (x) \ : "b" (addr), "i" (-EFAULT), "0" (err)) diff --git a/arch/powerpc/sysdev/fsl_rmu.c b/arch/powerpc/sysdev/fsl_rmu.c index 15485789e9d..14bd5221f28 100644 --- a/arch/powerpc/sysdev/fsl_rmu.c +++ b/arch/powerpc/sysdev/fsl_rmu.c @@ -100,14 +100,8 @@ #define DOORBELL_DSR_TE 0x00000080 #define DOORBELL_DSR_QFI 0x00000010 #define DOORBELL_DSR_DIQI 0x00000001 -#define DOORBELL_TID_OFFSET 0x02 -#define DOORBELL_SID_OFFSET 0x04 -#define DOORBELL_INFO_OFFSET 0x06 #define DOORBELL_MESSAGE_SIZE 0x08 -#define DBELL_SID(x) (*(u16 *)(x + DOORBELL_SID_OFFSET)) -#define DBELL_TID(x) (*(u16 *)(x + DOORBELL_TID_OFFSET)) -#define DBELL_INF(x) (*(u16 *)(x + DOORBELL_INFO_OFFSET)) struct rio_msg_regs { u32 omr; @@ -193,6 +187,13 @@ struct fsl_rmu { int rxirq; }; +struct rio_dbell_msg { + u16 pad1; + u16 tid; + u16 sid; + u16 info; +}; + /** * fsl_rio_tx_handler - MPC85xx outbound message interrupt handler * @irq: Linux interrupt number @@ -311,8 +312,8 @@ fsl_rio_dbell_handler(int irq, void *dev_instance) /* XXX Need to check/dispatch until queue empty */ if (dsr & DOORBELL_DSR_DIQI) { - u32 dmsg = - (u32) fsl_dbell->dbell_ring.virt + + struct rio_dbell_msg *dmsg = + fsl_dbell->dbell_ring.virt + (in_be32(&fsl_dbell->dbell_regs->dqdpar) & 0xfff); struct rio_dbell *dbell; int found = 0; @@ -320,25 +321,25 @@ fsl_rio_dbell_handler(int irq, void *dev_instance) pr_debug ("RIO: processing doorbell," " sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), DBELL_INF(dmsg)); + dmsg->sid, dmsg->tid, dmsg->info); for (i = 0; i < MAX_PORT_NUM; i++) { if (fsl_dbell->mport[i]) { list_for_each_entry(dbell, &fsl_dbell->mport[i]->dbells, node) { if ((dbell->res->start - <= DBELL_INF(dmsg)) + <= dmsg->info) && (dbell->res->end - >= DBELL_INF(dmsg))) { + >= dmsg->info)) { found = 1; break; } } if (found && dbell->dinb) { dbell->dinb(fsl_dbell->mport[i], - dbell->dev_id, DBELL_SID(dmsg), - DBELL_TID(dmsg), - DBELL_INF(dmsg)); + dbell->dev_id, dmsg->sid, + dmsg->tid, + dmsg->info); break; } } @@ -348,8 +349,8 @@ fsl_rio_dbell_handler(int irq, void *dev_instance) pr_debug ("RIO: spurious doorbell," " sid %2.2x tid %2.2x info %4.4x\n", - DBELL_SID(dmsg), DBELL_TID(dmsg), - DBELL_INF(dmsg)); + dmsg->sid, dmsg->tid, + dmsg->info); } setbits32(&fsl_dbell->dbell_regs->dmr, DOORBELL_DMR_DI); out_be32(&fsl_dbell->dbell_regs->dsr, DOORBELL_DSR_DIQI); @@ -657,7 +658,7 @@ fsl_add_outb_message(struct rio_mport *mport, struct rio_dev *rdev, int mbox, int ret = 0; pr_debug("RIO: fsl_add_outb_message(): destid %4.4x mbox %d buffer " \ - "%8.8x len %8.8x\n", rdev->destid, mbox, (int)buffer, len); + "%p len %8.8zx\n", rdev->destid, mbox, buffer, len); if ((len < 8) || (len > RIO_MAX_MSG_SIZE)) { ret = -EINVAL; goto out; @@ -972,7 +973,8 @@ out: void *fsl_get_inb_message(struct rio_mport *mport, int mbox) { struct fsl_rmu *rmu = GET_RMM_HANDLE(mport); - u32 phys_buf, virt_buf; + u32 phys_buf; + void *virt_buf; void *buf = NULL; int buf_idx; @@ -982,7 +984,7 @@ void *fsl_get_inb_message(struct rio_mport *mport, int mbox) if (phys_buf == in_be32(&rmu->msg_regs->ifqepar)) goto out2; - virt_buf = (u32) rmu->msg_rx_ring.virt + (phys_buf + virt_buf = rmu->msg_rx_ring.virt + (phys_buf - rmu->msg_rx_ring.phys); buf_idx = (phys_buf - rmu->msg_rx_ring.phys) / RIO_MAX_MSG_SIZE; buf = rmu->msg_rx_ring.virt_buffer[buf_idx]; @@ -994,7 +996,7 @@ void *fsl_get_inb_message(struct rio_mport *mport, int mbox) } /* Copy max message size, caller is expected to allocate that big */ - memcpy(buf, (void *)virt_buf, RIO_MAX_MSG_SIZE); + memcpy(buf, virt_buf, RIO_MAX_MSG_SIZE); /* Clear the available buffer */ rmu->msg_rx_ring.virt_buffer[buf_idx] = NULL; diff --git a/arch/powerpc/sysdev/ge/Makefile b/arch/powerpc/sysdev/ge/Makefile new file mode 100644 index 00000000000..8731ffcb79b --- /dev/null +++ b/arch/powerpc/sysdev/ge/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_GE_FPGA) += ge_pic.o diff --git a/arch/powerpc/platforms/86xx/gef_pic.c b/arch/powerpc/sysdev/ge/ge_pic.c index af3fd697de8..2bcb78bb3a1 100644 --- a/arch/powerpc/platforms/86xx/gef_pic.c +++ b/arch/powerpc/sysdev/ge/ge_pic.c @@ -22,7 +22,7 @@ #include <asm/prom.h> #include <asm/irq.h> -#include "gef_pic.h" +#include "ge_pic.h" #define DEBUG #undef DEBUG diff --git a/arch/powerpc/platforms/86xx/gef_pic.h b/arch/powerpc/sysdev/ge/ge_pic.h index 6149916da3f..6149916da3f 100644 --- a/arch/powerpc/platforms/86xx/gef_pic.h +++ b/arch/powerpc/sysdev/ge/ge_pic.h diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index c83a512fa17..9ac71ebd2c4 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -873,7 +873,7 @@ int mpic_set_irq_type(struct irq_data *d, unsigned int flow_type) DBG("mpic: set_irq_type(mpic:@%p,virq:%d,src:0x%x,type:0x%x)\n", mpic, d->irq, src, flow_type); - if (src >= mpic->irq_count) + if (src >= mpic->num_sources) return -EINVAL; if (flow_type == IRQ_TYPE_NONE) @@ -909,7 +909,7 @@ void mpic_set_vector(unsigned int virq, unsigned int vector) DBG("mpic: set_vector(mpic:@%p,virq:%d,src:%d,vector:0x%x)\n", mpic, virq, src, vector); - if (src >= mpic->irq_count) + if (src >= mpic->num_sources) return; vecpri = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); @@ -926,7 +926,7 @@ void mpic_set_destination(unsigned int virq, unsigned int cpuid) DBG("mpic: set_destination(mpic:@%p,virq:%d,src:%d,cpuid:0x%x)\n", mpic, virq, src, cpuid); - if (src >= mpic->irq_count) + if (src >= mpic->num_sources) return; mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION), 1 << cpuid); @@ -1006,7 +1006,7 @@ static int mpic_host_map(struct irq_domain *h, unsigned int virq, return 0; } - if (hw >= mpic->irq_count) + if (hw >= mpic->num_sources) return -EINVAL; mpic_msi_reserve_hwirq(mpic, hw); @@ -1149,6 +1149,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, u32 greg_feature; const char *vers; const u32 *psrc; + u32 last_irq; /* Default MPIC search parameters */ static const struct of_device_id __initconst mpic_device_id[] = { @@ -1182,6 +1183,16 @@ struct mpic * __init mpic_alloc(struct device_node *node, } } + /* Read extra device-tree properties into the flags variable */ + if (of_get_property(node, "big-endian", NULL)) + flags |= MPIC_BIG_ENDIAN; + if (of_get_property(node, "pic-no-reset", NULL)) + flags |= MPIC_NO_RESET; + if (of_get_property(node, "single-cpu-affinity", NULL)) + flags |= MPIC_SINGLE_DEST_CPU; + if (of_device_is_compatible(node, "fsl,mpic")) + flags |= MPIC_FSL; + mpic = kzalloc(sizeof(struct mpic), GFP_KERNEL); if (mpic == NULL) goto err_of_node_put; @@ -1189,15 +1200,16 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->name = name; mpic->node = node; mpic->paddr = phys_addr; + mpic->flags = flags; mpic->hc_irq = mpic_irq_chip; mpic->hc_irq.name = name; - if (!(flags & MPIC_SECONDARY)) + if (!(mpic->flags & MPIC_SECONDARY)) mpic->hc_irq.irq_set_affinity = mpic_set_affinity; #ifdef CONFIG_MPIC_U3_HT_IRQS mpic->hc_ht_irq = mpic_irq_ht_chip; mpic->hc_ht_irq.name = name; - if (!(flags & MPIC_SECONDARY)) + if (!(mpic->flags & MPIC_SECONDARY)) mpic->hc_ht_irq.irq_set_affinity = mpic_set_affinity; #endif /* CONFIG_MPIC_U3_HT_IRQS */ @@ -1209,12 +1221,9 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->hc_tm = mpic_tm_chip; mpic->hc_tm.name = name; - mpic->flags = flags; - mpic->isu_size = isu_size; - mpic->irq_count = irq_count; mpic->num_sources = 0; /* so far */ - if (flags & MPIC_LARGE_VECTORS) + if (mpic->flags & MPIC_LARGE_VECTORS) intvec_top = 2047; else intvec_top = 255; @@ -1233,12 +1242,6 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->ipi_vecs[3] = intvec_top - 1; mpic->spurious_vec = intvec_top; - /* Check for "big-endian" in device-tree */ - if (of_get_property(mpic->node, "big-endian", NULL) != NULL) - mpic->flags |= MPIC_BIG_ENDIAN; - if (of_device_is_compatible(mpic->node, "fsl,mpic")) - mpic->flags |= MPIC_FSL; - /* Look for protected sources */ psrc = of_get_property(mpic->node, "protected-sources", &psize); if (psrc) { @@ -1254,11 +1257,11 @@ struct mpic * __init mpic_alloc(struct device_node *node, } #ifdef CONFIG_MPIC_WEIRD - mpic->hw_set = mpic_infos[MPIC_GET_REGSET(flags)]; + mpic->hw_set = mpic_infos[MPIC_GET_REGSET(mpic->flags)]; #endif /* default register type */ - if (flags & MPIC_BIG_ENDIAN) + if (mpic->flags & MPIC_BIG_ENDIAN) mpic->reg_type = mpic_access_mmio_be; else mpic->reg_type = mpic_access_mmio_le; @@ -1268,10 +1271,10 @@ struct mpic * __init mpic_alloc(struct device_node *node, * only if the kernel includes DCR support. */ #ifdef CONFIG_PPC_DCR - if (flags & MPIC_USES_DCR) + if (mpic->flags & MPIC_USES_DCR) mpic->reg_type = mpic_access_dcr; #else - BUG_ON(flags & MPIC_USES_DCR); + BUG_ON(mpic->flags & MPIC_USES_DCR); #endif /* Map the global registers */ @@ -1283,10 +1286,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, /* When using a device-node, reset requests are only honored if the MPIC * is allowed to reset. */ - if (of_get_property(mpic->node, "pic-no-reset", NULL)) - mpic->flags |= MPIC_NO_RESET; - - if ((flags & MPIC_WANTS_RESET) && !(mpic->flags & MPIC_NO_RESET)) { + if (!(mpic->flags & MPIC_NO_RESET)) { printk(KERN_DEBUG "mpic: Resetting\n"); mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) @@ -1297,31 +1297,17 @@ struct mpic * __init mpic_alloc(struct device_node *node, } /* CoreInt */ - if (flags & MPIC_ENABLE_COREINT) + if (mpic->flags & MPIC_ENABLE_COREINT) mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) | MPIC_GREG_GCONF_COREINT); - if (flags & MPIC_ENABLE_MCK) + if (mpic->flags & MPIC_ENABLE_MCK) mpic_write(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0), mpic_read(mpic->gregs, MPIC_INFO(GREG_GLOBAL_CONF_0)) | MPIC_GREG_GCONF_MCK); /* - * Read feature register. For non-ISU MPICs, num sources as well. On - * ISU MPICs, sources are counted as ISUs are added - */ - greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); - if (isu_size == 0) { - if (flags & MPIC_BROKEN_FRR_NIRQS) - mpic->num_sources = mpic->irq_count; - else - mpic->num_sources = - ((greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) - >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT) + 1; - } - - /* * The MPIC driver will crash if there are more cores than we * can initialize, so we may as well catch that problem here. */ @@ -1336,17 +1322,41 @@ struct mpic * __init mpic_alloc(struct device_node *node, 0x1000); } + /* + * Read feature register. For non-ISU MPICs, num sources as well. On + * ISU MPICs, sources are counted as ISUs are added + */ + greg_feature = mpic_read(mpic->gregs, MPIC_INFO(GREG_FEATURE_0)); + + /* + * By default, the last source number comes from the MPIC, but the + * device-tree and board support code can override it on buggy hw. + * If we get passed an isu_size (multi-isu MPIC) then we use that + * as a default instead of the value read from the HW. + */ + last_irq = (greg_feature & MPIC_GREG_FEATURE_LAST_SRC_MASK) + >> MPIC_GREG_FEATURE_LAST_SRC_SHIFT; + if (isu_size) + last_irq = isu_size * MPIC_MAX_ISU - 1; + of_property_read_u32(mpic->node, "last-interrupt-source", &last_irq); + if (irq_count) + last_irq = irq_count - 1; + /* Initialize main ISU if none provided */ - if (mpic->isu_size == 0) { - mpic->isu_size = mpic->num_sources; + if (!isu_size) { + isu_size = last_irq + 1; + mpic->num_sources = isu_size; mpic_map(mpic, mpic->paddr, &mpic->isus[0], - MPIC_INFO(IRQ_BASE), MPIC_INFO(IRQ_STRIDE) * mpic->isu_size); + MPIC_INFO(IRQ_BASE), + MPIC_INFO(IRQ_STRIDE) * isu_size); } + + mpic->isu_size = isu_size; mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1); mpic->isu_mask = (1 << mpic->isu_shift) - 1; mpic->irqhost = irq_domain_add_linear(mpic->node, - isu_size ? isu_size : mpic->num_sources, + last_irq + 1, &mpic_host_ops, mpic); /* @@ -1380,7 +1390,7 @@ struct mpic * __init mpic_alloc(struct device_node *node, mpic->next = mpics; mpics = mpic; - if (!(flags & MPIC_SECONDARY)) { + if (!(mpic->flags & MPIC_SECONDARY)) { mpic_primary = mpic; irq_set_default_host(mpic->irqhost); } @@ -1447,10 +1457,6 @@ void __init mpic_init(struct mpic *mpic) (mpic->ipi_vecs[0] + i)); } - /* Initialize interrupt sources */ - if (mpic->irq_count == 0) - mpic->irq_count = mpic->num_sources; - /* Do the HT PIC fixups on U3 broken mpic */ DBG("MPIC flags: %x\n", mpic->flags); if ((mpic->flags & MPIC_U3_HT_IRQS) && !(mpic->flags & MPIC_SECONDARY)) { diff --git a/arch/powerpc/sysdev/mpic_msgr.c b/arch/powerpc/sysdev/mpic_msgr.c new file mode 100644 index 00000000000..6e7fa386e76 --- /dev/null +++ b/arch/powerpc/sysdev/mpic_msgr.c @@ -0,0 +1,282 @@ +/* + * Copyright 2011-2012, Meador Inge, Mentor Graphics Corporation. + * + * Some ideas based on un-pushed work done by Vivek Mahajan, Jason Jin, and + * Mingkai Hu from Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the + * License. + * + */ + +#include <linux/list.h> +#include <linux/of_platform.h> +#include <linux/errno.h> +#include <asm/prom.h> +#include <asm/hw_irq.h> +#include <asm/ppc-pci.h> +#include <asm/mpic_msgr.h> + +#define MPIC_MSGR_REGISTERS_PER_BLOCK 4 +#define MPIC_MSGR_STRIDE 0x10 +#define MPIC_MSGR_MER_OFFSET 0x100 +#define MSGR_INUSE 0 +#define MSGR_FREE 1 + +static struct mpic_msgr **mpic_msgrs; +static unsigned int mpic_msgr_count; + +static inline void _mpic_msgr_mer_write(struct mpic_msgr *msgr, u32 value) +{ + out_be32(msgr->mer, value); +} + +static inline u32 _mpic_msgr_mer_read(struct mpic_msgr *msgr) +{ + return in_be32(msgr->mer); +} + +static inline void _mpic_msgr_disable(struct mpic_msgr *msgr) +{ + u32 mer = _mpic_msgr_mer_read(msgr); + + _mpic_msgr_mer_write(msgr, mer & ~(1 << msgr->num)); +} + +struct mpic_msgr *mpic_msgr_get(unsigned int reg_num) +{ + unsigned long flags; + struct mpic_msgr *msgr; + + /* Assume busy until proven otherwise. */ + msgr = ERR_PTR(-EBUSY); + + if (reg_num >= mpic_msgr_count) + return ERR_PTR(-ENODEV); + + raw_spin_lock_irqsave(&msgr->lock, flags); + if (mpic_msgrs[reg_num]->in_use == MSGR_FREE) { + msgr = mpic_msgrs[reg_num]; + msgr->in_use = MSGR_INUSE; + } + raw_spin_unlock_irqrestore(&msgr->lock, flags); + + return msgr; +} +EXPORT_SYMBOL_GPL(mpic_msgr_get); + +void mpic_msgr_put(struct mpic_msgr *msgr) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&msgr->lock, flags); + msgr->in_use = MSGR_FREE; + _mpic_msgr_disable(msgr); + raw_spin_unlock_irqrestore(&msgr->lock, flags); +} +EXPORT_SYMBOL_GPL(mpic_msgr_put); + +void mpic_msgr_enable(struct mpic_msgr *msgr) +{ + unsigned long flags; + u32 mer; + + raw_spin_lock_irqsave(&msgr->lock, flags); + mer = _mpic_msgr_mer_read(msgr); + _mpic_msgr_mer_write(msgr, mer | (1 << msgr->num)); + raw_spin_unlock_irqrestore(&msgr->lock, flags); +} +EXPORT_SYMBOL_GPL(mpic_msgr_enable); + +void mpic_msgr_disable(struct mpic_msgr *msgr) +{ + unsigned long flags; + + raw_spin_lock_irqsave(&msgr->lock, flags); + _mpic_msgr_disable(msgr); + raw_spin_unlock_irqrestore(&msgr->lock, flags); +} +EXPORT_SYMBOL_GPL(mpic_msgr_disable); + +/* The following three functions are used to compute the order and number of + * the message register blocks. They are clearly very inefficent. However, + * they are called *only* a few times during device initialization. + */ +static unsigned int mpic_msgr_number_of_blocks(void) +{ + unsigned int count; + struct device_node *aliases; + + count = 0; + aliases = of_find_node_by_name(NULL, "aliases"); + + if (aliases) { + char buf[32]; + + for (;;) { + snprintf(buf, sizeof(buf), "mpic-msgr-block%d", count); + if (!of_find_property(aliases, buf, NULL)) + break; + + count += 1; + } + } + + return count; +} + +static unsigned int mpic_msgr_number_of_registers(void) +{ + return mpic_msgr_number_of_blocks() * MPIC_MSGR_REGISTERS_PER_BLOCK; +} + +static int mpic_msgr_block_number(struct device_node *node) +{ + struct device_node *aliases; + unsigned int index, number_of_blocks; + char buf[64]; + + number_of_blocks = mpic_msgr_number_of_blocks(); + aliases = of_find_node_by_name(NULL, "aliases"); + if (!aliases) + return -1; + + for (index = 0; index < number_of_blocks; ++index) { + struct property *prop; + + snprintf(buf, sizeof(buf), "mpic-msgr-block%d", index); + prop = of_find_property(aliases, buf, NULL); + if (node == of_find_node_by_path(prop->value)) + break; + } + + return index == number_of_blocks ? -1 : index; +} + +/* The probe function for a single message register block. + */ +static __devinit int mpic_msgr_probe(struct platform_device *dev) +{ + void __iomem *msgr_block_addr; + int block_number; + struct resource rsrc; + unsigned int i; + unsigned int irq_index; + struct device_node *np = dev->dev.of_node; + unsigned int receive_mask; + const unsigned int *prop; + + if (!np) { + dev_err(&dev->dev, "Device OF-Node is NULL"); + return -EFAULT; + } + + /* Allocate the message register array upon the first device + * registered. + */ + if (!mpic_msgrs) { + mpic_msgr_count = mpic_msgr_number_of_registers(); + dev_info(&dev->dev, "Found %d message registers\n", + mpic_msgr_count); + + mpic_msgrs = kzalloc(sizeof(struct mpic_msgr) * mpic_msgr_count, + GFP_KERNEL); + if (!mpic_msgrs) { + dev_err(&dev->dev, + "No memory for message register blocks\n"); + return -ENOMEM; + } + } + dev_info(&dev->dev, "Of-device full name %s\n", np->full_name); + + /* IO map the message register block. */ + of_address_to_resource(np, 0, &rsrc); + msgr_block_addr = ioremap(rsrc.start, rsrc.end - rsrc.start); + if (!msgr_block_addr) { + dev_err(&dev->dev, "Failed to iomap MPIC message registers"); + return -EFAULT; + } + + /* Ensure the block has a defined order. */ + block_number = mpic_msgr_block_number(np); + if (block_number < 0) { + dev_err(&dev->dev, + "Failed to find message register block alias\n"); + return -ENODEV; + } + dev_info(&dev->dev, "Setting up message register block %d\n", + block_number); + + /* Grab the receive mask which specifies what registers can receive + * interrupts. + */ + prop = of_get_property(np, "mpic-msgr-receive-mask", NULL); + receive_mask = (prop) ? *prop : 0xF; + + /* Build up the appropriate message register data structures. */ + for (i = 0, irq_index = 0; i < MPIC_MSGR_REGISTERS_PER_BLOCK; ++i) { + struct mpic_msgr *msgr; + unsigned int reg_number; + + msgr = kzalloc(sizeof(struct mpic_msgr), GFP_KERNEL); + if (!msgr) { + dev_err(&dev->dev, "No memory for message register\n"); + return -ENOMEM; + } + + reg_number = block_number * MPIC_MSGR_REGISTERS_PER_BLOCK + i; + msgr->base = msgr_block_addr + i * MPIC_MSGR_STRIDE; + msgr->mer = msgr->base + MPIC_MSGR_MER_OFFSET; + msgr->in_use = MSGR_FREE; + msgr->num = i; + raw_spin_lock_init(&msgr->lock); + + if (receive_mask & (1 << i)) { + struct resource irq; + + if (of_irq_to_resource(np, irq_index, &irq) == NO_IRQ) { + dev_err(&dev->dev, + "Missing interrupt specifier"); + kfree(msgr); + return -EFAULT; + } + msgr->irq = irq.start; + irq_index += 1; + } else { + msgr->irq = NO_IRQ; + } + + mpic_msgrs[reg_number] = msgr; + mpic_msgr_disable(msgr); + dev_info(&dev->dev, "Register %d initialized: irq %d\n", + reg_number, msgr->irq); + + } + + return 0; +} + +static const struct of_device_id mpic_msgr_ids[] = { + { + .compatible = "fsl,mpic-v3.1-msgr", + .data = NULL, + }, + {} +}; + +static struct platform_driver mpic_msgr_driver = { + .driver = { + .name = "mpic-msgr", + .owner = THIS_MODULE, + .of_match_table = mpic_msgr_ids, + }, + .probe = mpic_msgr_probe, +}; + +static __init int mpic_msgr_init(void) +{ + return platform_driver_register(&mpic_msgr_driver); +} +subsys_initcall(mpic_msgr_init); diff --git a/arch/powerpc/sysdev/mpic_msi.c b/arch/powerpc/sysdev/mpic_msi.c index 0622aa91b18..bbf342c8831 100644 --- a/arch/powerpc/sysdev/mpic_msi.c +++ b/arch/powerpc/sysdev/mpic_msi.c @@ -54,7 +54,7 @@ static int mpic_msi_reserve_u3_hwirqs(struct mpic *mpic) for (i = 100; i < 105; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); - for (i = 124; i < mpic->irq_count; i++) + for (i = 124; i < mpic->num_sources; i++) msi_bitmap_reserve_hwirq(&mpic->msi_bitmap, i); @@ -83,7 +83,7 @@ int mpic_msi_init_allocator(struct mpic *mpic) { int rc; - rc = msi_bitmap_alloc(&mpic->msi_bitmap, mpic->irq_count, + rc = msi_bitmap_alloc(&mpic->msi_bitmap, mpic->num_sources, mpic->irqhost->of_node); if (rc) return rc; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 4f05f754234..56e8b3c3c89 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -1050,6 +1050,74 @@ static struct ppc4xx_pciex_hwops ppc460ex_pcie_hwops __initdata = .check_link = ppc4xx_pciex_check_link_sdr, }; +static int __init apm821xx_pciex_core_init(struct device_node *np) +{ + /* Return the number of pcie port */ + return 1; +} + +static int apm821xx_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val; + + /* + * Do a software reset on PCIe ports. + * This code is to fix the issue that pci drivers doesn't re-assign + * bus number for PCIE devices after Uboot + * scanned and configured all the buses (eg. PCIE NIC IntelPro/1000 + * PT quad port, SAS LSI 1064E) + */ + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x0); + mdelay(10); + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; + else + val = PTYPE_ROOT_PORT << 20; + + val |= LNKW_X1 << 12; + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000); + + mtdcri(SDR0, PESDR0_460EX_L0CDRCTL, 0x00003230); + mtdcri(SDR0, PESDR0_460EX_L0DRV, 0x00000130); + mtdcri(SDR0, PESDR0_460EX_L0CLK, 0x00000006); + + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x10000000); + mdelay(50); + mtdcri(SDR0, PESDR0_460EX_PHY_CTL_RST, 0x30000000); + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | + (PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTPYN)); + + /* Poll for PHY reset */ + val = PESDR0_460EX_RSTSTA - port->sdr_base; + if (ppc4xx_pciex_wait_on_sdr(port, val, 0x1, 1, 100)) { + printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__); + return -EBUSY; + } else { + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + (mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) & + ~(PESDRx_RCSSET_RSTGU | PESDRx_RCSSET_RSTDL)) | + PESDRx_RCSSET_RSTPYN); + + port->has_ibpre = 1; + return 0; + } +} + +static struct ppc4xx_pciex_hwops apm821xx_pcie_hwops __initdata = { + .want_sdr = true, + .core_init = apm821xx_pciex_core_init, + .port_init_hw = apm821xx_pciex_init_port_hw, + .setup_utl = ppc460ex_pciex_init_utl, + .check_link = ppc4xx_pciex_check_link_sdr, +}; + static int __init ppc460sx_pciex_core_init(struct device_node *np) { /* HSS drive amplitude */ @@ -1362,6 +1430,8 @@ static int __init ppc4xx_pciex_check_core_init(struct device_node *np) ppc4xx_pciex_hwops = &ppc460ex_pcie_hwops; if (of_device_is_compatible(np, "ibm,plb-pciex-460sx")) ppc4xx_pciex_hwops = &ppc460sx_pcie_hwops; + if (of_device_is_compatible(np, "ibm,plb-pciex-apm821xx")) + ppc4xx_pciex_hwops = &apm821xx_pcie_hwops; #endif /* CONFIG_44x */ #ifdef CONFIG_40x if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index cb95eea74d3..68a9cbbab45 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -39,7 +39,6 @@ #include <asm/irq_regs.h> #include <asm/spu.h> #include <asm/spu_priv1.h> -#include <asm/firmware.h> #include <asm/setjmp.h> #include <asm/reg.h> @@ -1437,7 +1436,8 @@ static void excprint(struct pt_regs *fp) printf(" current = 0x%lx\n", current); #ifdef CONFIG_PPC64 - printf(" paca = 0x%lx\n", get_paca()); + printf(" paca = 0x%lx\t softe: %d\t irq_happened: 0x%02x\n", + local_paca, local_paca->soft_enabled, local_paca->irq_happened); #endif if (current) { printf(" pid = %ld, comm = %s\n", @@ -1634,25 +1634,6 @@ static void super_regs(void) mfspr(SPRN_DEC), mfspr(SPRN_SPRG2)); printf("sp = "REG" sprg3= "REG"\n", sp, mfspr(SPRN_SPRG3)); printf("toc = "REG" dar = "REG"\n", toc, mfspr(SPRN_DAR)); -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) { - struct paca_struct *ptrPaca; - struct lppaca *ptrLpPaca; - - /* Dump out relevant Paca data areas. */ - printf("Paca: \n"); - ptrPaca = get_paca(); - - printf(" Local Processor Control Area (LpPaca): \n"); - ptrLpPaca = ptrPaca->lppaca_ptr; - printf(" Saved Srr0=%.16lx Saved Srr1=%.16lx \n", - ptrLpPaca->saved_srr0, ptrLpPaca->saved_srr1); - printf(" Saved Gpr3=%.16lx Saved Gpr4=%.16lx \n", - ptrLpPaca->saved_gpr3, ptrLpPaca->saved_gpr4); - printf(" Saved Gpr5=%.16lx \n", - ptrLpPaca->gpr5_dword.saved_gpr5); - } -#endif return; } @@ -2644,7 +2625,7 @@ static void dump_slb(void) static void dump_stab(void) { int i; - unsigned long *tmp = (unsigned long *)get_paca()->stab_addr; + unsigned long *tmp = (unsigned long *)local_paca->stab_addr; printf("Segment table contents of cpu %x\n", smp_processor_id()); @@ -2855,10 +2836,6 @@ static void dump_tlb_book3e(void) static void xmon_init(int enable) { -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return; -#endif if (enable) { __debugger = xmon; __debugger_ipi = xmon_ipi; @@ -2895,10 +2872,6 @@ static struct sysrq_key_op sysrq_xmon_op = { static int __init setup_xmon_sysrq(void) { -#ifdef CONFIG_PPC_ISERIES - if (firmware_has_feature(FW_FEATURE_ISERIES)) - return 0; -#endif register_sysrq_key('x', &sysrq_xmon_op); return 0; } |