aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/configs/at572d940hfek_defconfig358
-rw-r--r--arch/arm/mach-at91/Kconfig21
-rw-r--r--arch/arm/mach-at91/Makefile4
-rw-r--r--arch/arm/mach-at91/at572d940hf.c412
-rw-r--r--arch/arm/mach-at91/at572d940hf_devices.c964
-rw-r--r--arch/arm/mach-at91/board-at572d940hf_ek.c323
-rw-r--r--arch/arm/mach-at91/clock.c2
-rw-r--r--arch/arm/mach-at91/generic.h4
-rw-r--r--arch/arm/mach-at91/include/mach/at572d940hf.h121
-rw-r--r--arch/arm/mach-at91/include/mach/at572d940hf_matrix.h123
-rw-r--r--arch/arm/mach-at91/include/mach/board.h5
-rw-r--r--arch/arm/mach-at91/include/mach/cpu.h8
-rw-r--r--arch/arm/mach-at91/include/mach/hardware.h2
-rw-r--r--arch/arm/mach-at91/include/mach/timex.h5
14 files changed, 2 insertions, 2350 deletions
diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig
deleted file mode 100644
index 1b1158ae8f8..00000000000
--- a/arch/arm/configs/at572d940hfek_defconfig
+++ /dev/null
@@ -1,358 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOCALVERSION="-AT572D940HF"
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_AUDIT=y
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_RT_GROUP_SCHED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT572D940HF=y
-CONFIG_MACH_AT572D940HFEB=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_FPE_NWFPE_XP=y
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_NET_PKTGEN=m
-CONFIG_NET_TCPPROBE=m
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_DEBUG_DEVICES=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_CONNECTOR=m
-CONFIG_MTD=m
-CONFIG_MTD_DEBUG=y
-CONFIG_MTD_DEBUG_VERBOSE=1
-CONFIG_MTD_CONCAT=m
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=m
-CONFIG_MTD_BLOCK=m
-CONFIG_MTD_BLOCK_RO=m
-CONFIG_FTL=m
-CONFIG_NFTL=m
-CONFIG_NFTL_RW=y
-CONFIG_INFTL=m
-CONFIG_RFD_FTL=m
-CONFIG_SSFDC=m
-CONFIG_MTD_OOPS=m
-CONFIG_MTD_CFI=m
-CONFIG_MTD_JEDECPROBE=m
-CONFIG_MTD_CFI_INTELEXT=m
-CONFIG_MTD_CFI_AMDSTD=m
-CONFIG_MTD_CFI_STAA=m
-CONFIG_MTD_ROM=m
-CONFIG_MTD_ABSENT=m
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=m
-CONFIG_MTD_PLATRAM=m
-CONFIG_MTD_DATAFLASH=m
-CONFIG_MTD_M25P80=m
-CONFIG_MTD_SLRAM=m
-CONFIG_MTD_PHRAM=m
-CONFIG_MTD_MTDRAM=m
-CONFIG_MTD_BLOCK2MTD=m
-CONFIG_MTD_NAND=m
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-CONFIG_MTD_NAND_DISKONCHIP=m
-CONFIG_MTD_NAND_NANDSIM=m
-CONFIG_MTD_NAND_PLATFORM=m
-CONFIG_MTD_ALAUDA=m
-CONFIG_MTD_UBI=m
-CONFIG_MTD_UBI_GLUEBI=m
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=m
-CONFIG_SENSORS_TSL2550=m
-CONFIG_DS1682=m
-CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_CHR_DEV_SG=m
-CONFIG_CHR_DEV_SCH=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_SCSI_ISCSI_ATTRS=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_BONDING=m
-CONFIG_MACVLAN=m
-CONFIG_EQUALIZER=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MDIO_BITBANG=m
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_USB_ZD1201=m
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
-CONFIG_KEYBOARD_LKKBD=m
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_NEWTON=m
-CONFIG_KEYBOARD_STOWAWAY=m
-CONFIG_KEYBOARD_SUNKBD=m
-CONFIG_KEYBOARD_XTKBD=m
-CONFIG_MOUSE_PS2=m
-CONFIG_MOUSE_SERIAL=m
-CONFIG_MOUSE_APPLETOUCH=m
-CONFIG_MOUSE_VSXXXAA=m
-CONFIG_MOUSE_GPIO=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=m
-CONFIG_SERIO_SERPORT=m
-CONFIG_SERIO_RAW=m
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_NONSTANDARD=y
-CONFIG_N_HDLC=m
-CONFIG_SPECIALIX=m
-CONFIG_STALDRV=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_IPMI_HANDLER=m
-CONFIG_IPMI_DEVICE_INTERFACE=m
-CONFIG_IPMI_SI=m
-CONFIG_IPMI_WATCHDOG=m
-CONFIG_IPMI_POWEROFF=m
-CONFIG_HW_RANDOM=y
-CONFIG_R3964=m
-CONFIG_RAW_DRIVER=m
-CONFIG_TCG_TPM=m
-CONFIG_TCG_NSC=m
-CONFIG_TCG_ATMEL=m
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_BITBANG=m
-CONFIG_SPI_SPIDEV=m
-# CONFIG_HWMON is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_PCM_OSS_PLUGINS is not set
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_DYNAMIC_MINORS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_SND_DUMMY=m
-CONFIG_SND_VIRMIDI=m
-CONFIG_SND_USB_AUDIO=m
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_HID=m
-CONFIG_HIDRAW=y
-CONFIG_USB_HID=m
-CONFIG_USB_HIDDEV=y
-CONFIG_USB_KBD=m
-CONFIG_USB_MOUSE=m
-CONFIG_HID_A4TECH=m
-CONFIG_HID_APPLE=m
-CONFIG_HID_BELKIN=m
-CONFIG_HID_CHERRY=m
-CONFIG_HID_CHICONY=m
-CONFIG_HID_CYPRESS=m
-CONFIG_HID_EZKEY=m
-CONFIG_HID_GYRATION=m
-CONFIG_HID_LOGITECH=m
-CONFIG_HID_MICROSOFT=m
-CONFIG_HID_MONTEREY=m
-CONFIG_HID_PANTHERLORD=m
-CONFIG_HID_PETALYNX=m
-CONFIG_HID_SAMSUNG=m
-CONFIG_HID_SONY=m
-CONFIG_HID_SUNPLUS=m
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_DYNAMIC_MINORS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_ISD200=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_STORAGE_ALAUDA=m
-CONFIG_USB_STORAGE_KARMA=m
-CONFIG_USB_LIBUSUAL=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_EZUSB=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_SERIAL_SPCP8X5=m
-CONFIG_USB_SERIAL_DEBUG=m
-CONFIG_USB_EMI62=m
-CONFIG_USB_EMI26=m
-CONFIG_USB_ADUTUX=m
-CONFIG_USB_TEST=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_MIDI_GADGET=m
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_AT91=m
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=m
-CONFIG_LEDS_GPIO=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=m
-CONFIG_LEDS_TRIGGER_HEARTBEAT=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_INTF_DEV_UIE_EMUL=y
-CONFIG_RTC_DRV_DS1307=m
-CONFIG_RTC_DRV_DS1305=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_JBD_DEBUG=y
-CONFIG_REISERFS_FS=m
-CONFIG_REISERFS_CHECK=y
-CONFIG_REISERFS_PROC_INFO=y
-CONFIG_REISERFS_FS_XATTR=y
-CONFIG_REISERFS_FS_POSIX_ACL=y
-CONFIG_REISERFS_FS_SECURITY=y
-CONFIG_INOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_JFFS2_FS=m
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_FAVOURLZO=y
-CONFIG_CRAMFS=m
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3_ACL=y
-CONFIG_NFSD_V4=y
-CONFIG_CIFS=m
-CONFIG_CIFS_WEAK_PW_HASH=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_LDM_PARTITION=y
-CONFIG_LDM_DEBUG=y
-CONFIG_SGI_PARTITION=y
-CONFIG_SUN_PARTITION=y
-CONFIG_NLS_DEFAULT="cp437"
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_DLM=m
-CONFIG_PRINTK_TIME=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_UNUSED_SYMBOLS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 8cbc3aae6c6..22484670e7b 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -82,11 +82,6 @@ config ARCH_AT91CAP9
select HAVE_FB_ATMEL
select HAVE_NET_MACB
-config ARCH_AT572D940HF
- bool "AT572D940HF"
- select CPU_ARM926T
- select GENERIC_CLOCKEVENTS
-
config ARCH_AT91X40
bool "AT91x40"
select ARCH_USES_GETTIMEOFFSET
@@ -431,22 +426,6 @@ endif
# ----------------------------------------------------------
-if ARCH_AT572D940HF
-
-comment "AT572D940HF Board Type"
-
-config MACH_AT572D940HFEB
- bool "AT572D940HF-EK"
- depends on ARCH_AT572D940HF
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT572D940HF-EK evaluation kit.
- <http://www.atmel.com/products/diopsis/default.asp>
-
-endif
-
-# ----------------------------------------------------------
-
if ARCH_AT91X40
comment "AT91X40 Board Type"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index a83835e0c18..96966231920 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi
obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
-obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
# AT91RM9200 board-specific support
@@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
-# AT572D940HF board-specific support
-obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o
-
# AT91X40 board-specific support
obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c
deleted file mode 100644
index d06990777ff..00000000000
--- a/arch/arm/mach-at91/at572d940hf.c
+++ /dev/null
@@ -1,412 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf.c
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/module.h>
-
-#include <asm/mach/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at572d940hf.h>
-#include <mach/at91_pmc.h>
-#include <mach/at91_rstc.h>
-
-#include "generic.h"
-#include "clock.h"
-
-static struct map_desc at572d940hf_io_desc[] __initdata = {
- {
- .virtual = AT91_VA_BASE_SYS,
- .pfn = __phys_to_pfn(AT91_BASE_SYS),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE,
- .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE),
- .length = AT572D940HF_SRAM_SIZE,
- .type = MT_DEVICE,
- },
-};
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT572D940HF_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "macb_clk",
- .pmc_mask = 1 << AT572D940HF_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT572D940HF_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT572D940HF_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
- .name = "ssc2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT572D940HF_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc3_clk = {
- .name = "ssc3_clk",
- .pmc_mask = 1 << AT572D940HF_ID_SSC3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can0_clk = {
- .name = "can0_clk",
- .pmc_mask = 1 << AT572D940HF_ID_CAN0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can1_clk = {
- .name = "can1_clk",
- .pmc_mask = 1 << AT572D940HF_ID_CAN1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mAgicV_clk = {
- .name = "mAgicV_clk",
- .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &macb_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi0_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &ohci_clk,
- &ssc3_clk,
- &twi1_clk,
- &can0_clk,
- &can1_clk,
- &mAgicV_clk,
- /* irq0 .. irq2 */
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The five programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static struct clk mAgicV_mem_clk = {
- .name = "mAgicV_mem_clk",
- .pmc_mask = AT91_PMC_PCK4,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 4,
-};
-
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
-static void __init at572d940hf_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
- clk_register(&mAgicV_mem_clk);
-
- clk_register(&hck0);
- clk_register(&hck1);
-}
-
-static struct clk_lookup console_clock_lookup;
-
-void __init at572d940hf_set_console_clock(int id)
-{
- if (id >= ARRAY_SIZE(usart_clocks_lookups))
- return;
-
- console_clock_lookup.con_id = "usart";
- console_clock_lookup.clk = usart_clocks_lookups[id].clk;
- clkdev_add(&console_clock_lookup);
-}
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at572d940hf_gpio[] = {
- {
- .id = AT572D940HF_ID_PIOA,
- .offset = AT91_PIOA,
- .clock = &pioA_clk,
- }, {
- .id = AT572D940HF_ID_PIOB,
- .offset = AT91_PIOB,
- .clock = &pioB_clk,
- }, {
- .id = AT572D940HF_ID_PIOC,
- .offset = AT91_PIOC,
- .clock = &pioC_clk,
- }
-};
-
-static void at572d940hf_reset(void)
-{
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
-
-/* --------------------------------------------------------------------
- * AT572D940HF processor initialization
- * -------------------------------------------------------------------- */
-
-void __init at572d940hf_map_io(void)
-{
- /* Map peripherals */
- iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc));
-}
-
-void __init at572d940hf_initialize(unsigned long main_clock)
-{
- at91_arch_reset = at572d940hf_reset;
- at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1)
- | (1 << AT572D940HF_ID_IRQ2);
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at572d940hf_register_clocks();
-
- /* Register GPIO subsystem */
- at91_gpio_init(at572d940hf_gpio, 3);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 0, /* Parallel IO Controller A */
- 0, /* Parallel IO Controller B */
- 0, /* Parallel IO Controller C */
- 3, /* Ethernet */
- 6, /* USART 0 */
- 6, /* USART 1 */
- 6, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 4, /* USB Device Port */
- 0, /* Two-Wire Interface 0 */
- 6, /* Serial Peripheral Interface 0 */
- 6, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller 0 */
- 5, /* Serial Synchronous Controller 1 */
- 5, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 3, /* USB Host port */
- 3, /* Serial Synchronous Controller 3 */
- 0, /* Two-Wire Interface 1 */
- 0, /* CAN Controller 0 */
- 0, /* CAN Controller 1 */
- 0, /* mAgicV HALT line */
- 0, /* mAgicV SIRQ0 line */
- 0, /* mAgicV exception line */
- 0, /* mAgicV end of DMA line */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- if (!priority)
- priority = at572d940hf_default_irq_priority;
-
- /* Initialize the AIC interrupt controller */
- at91_aic_init(priority);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
-
diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c
deleted file mode 100644
index 14863b8e7e6..00000000000
--- a/arch/arm/mach-at91/at572d940hf_devices.c
+++ /dev/null
@@ -1,964 +0,0 @@
-/*
- * arch/arm/mach-at91/at572d940hf_devices.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at572d940hf.h>
-#include <mach/at572d940hf_matrix.h>
-#include <mach/at91sam9_smc.h>
-
-#include "generic.h"
-#include "sam9_smc.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT572D940HF_UHP_BASE,
- .end = AT572D940HF_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_UHP,
- .end = AT572D940HF_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- if (!data)
- return;
-
- usbh_data = *data;
- platform_device_register(&at572d940hf_usbh_device);
-
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_USB_GADGET_AT91
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_UDP,
- .end = AT572D940HF_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_UDP,
- .end = AT572D940HF_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (data->vbus_pin) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally */
-
- udc_data = *data;
- platform_device_register(&at572d940hf_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct at91_eth_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_EMAC,
- .end = AT572D940HF_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_EMAC,
- .end = AT572D940HF_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = &eth_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &eth_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct at91_eth_data *data)
-{
- if (!data)
- return;
-
- if (data->phy_irq_pin) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Only RMII is supported */
- data->is_rmii = 1;
-
- /* Pins used for RMII */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */
-
- eth_data = *data;
- platform_device_register(&at572d940hf_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct at91_eth_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct at91_mmc_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_MCI,
- .end = AT572D940HF_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_MCI,
- .end = AT572D940HF_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_mmc_device = {
- .name = "at91_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data)
-{
- if (!data)
- return;
-
- /* input/irq */
- if (data->det_pin) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
- if (data->wp_pin)
- at91_set_gpio_input(data->wp_pin, 1);
- if (data->vcc_pin)
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PC22, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PC23, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PC24, 1);
- if (data->wire4) {
- at91_set_A_periph(AT91_PIN_PC25, 1);
- at91_set_A_periph(AT91_PIN_PC26, 1);
- at91_set_A_periph(AT91_PIN_PC27, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at572d940hf_mmc_device);
-}
-#else
-void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at572d940hf_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_sys_read(AT91_MATRIX_EBICSA);
- at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (data->enable_pin)
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (data->rdy_pin)
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (data->det_pin)
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */
- at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */
-
- nand_data = *data;
- platform_device_register(&at572d940hf_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PC7,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PC8,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at572d940hf_twi_device {
- .name = "i2c-gpio",
- .id = -1,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI0,
- .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI0,
- .end = AT572D940HF_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi0_device = {
- .name = "at91_i2c",
- .id = 0,
- .resource = twi0_resources,
- .num_resources = ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TWI1,
- .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TWI1,
- .end = AT572D940HF_ID_TWI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_twi1_device = {
- .name = "at91_i2c",
- .id = 1,
- .resource = twi1_resources,
- .num_resources = ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI0 interface */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC7, 1);
-
- at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC8, 1);
-
- /* pins used for TWI1 interface */
- at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PC20, 1);
-
- at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PC21, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at572d940hf_twi0_device);
- platform_device_register(&at572d940hf_twi1_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_SPI0,
- .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_SPI0,
- .end = AT572D940HF_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_SPI1,
- .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_SPI1,
- .end = AT572D940HF_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at572d940hf_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */
-
- platform_device_register(&at572d940hf_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_TCB,
- .end = AT572D940HF_BASE_TCB + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_TC0,
- .end = AT572D940HF_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = AT572D940HF_ID_TC1,
- .end = AT572D940HF_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = AT572D940HF_ID_TC2,
- .end = AT572D940HF_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at572d940hf_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at572d940hf_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91_BASE_SYS + AT91_RTT,
- .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at572d940hf_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
- .num_resources = ARRAY_SIZE(rtt_resources),
-};
-
-static void __init at91_add_device_rtt(void)
-{
- platform_device_register(&at572d940hf_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct platform_device at572d940hf_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at572d940hf_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91_VA_BASE_SYS + AT91_DBGU,
- .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91_ID_SYS,
- .end = AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
- .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US0,
- .end = AT572D940HF_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US0,
- .end = AT572D940HF_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US1,
- .end = AT572D940HF_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US1,
- .end = AT572D940HF_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT572D940HF_BASE_US2,
- .end = AT572D940HF_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT572D940HF_ID_US2,
- .end = AT572D940HF_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at572d940hf_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-struct platform_device *atmel_default_console_device; /* the serial console device */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at572d940hf_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT572D940HF_ID_US0:
- pdev = &at572d940hf_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT572D940HF_ID_US1:
- pdev = &at572d940hf_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT572D940HF_ID_US2:
- pdev = &at572d940hf_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_set_serial_console(unsigned portnr)
-{
- if (portnr < ATMEL_MAX_UART) {
- atmel_default_console_device = at91_uarts[portnr];
- at572d940hf_set_console_clock(portnr);
- }
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_set_serial_console(unsigned portnr) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * mAgic
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_MAGICV
-static struct resource mAgic_resources[] = {
- {
- .start = AT91_MAGIC_PM_BASE,
- .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_I_BASE,
- .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_F_BASE,
- .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_DM_DB_BASE,
- .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_REGS_BASE,
- .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT91_MAGIC_EXTPAGE_BASE,
- .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = AT572D940HF_ID_MSIRQ0,
- .end = AT572D940HF_ID_MSIRQ0,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MHALT,
- .end = AT572D940HF_ID_MHALT,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEXC,
- .end = AT572D940HF_ID_MEXC,
- .flags = IORESOURCE_IRQ,
- },
- {
- .start = AT572D940HF_ID_MEDMA,
- .end = AT572D940HF_ID_MEDMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device mAgic_device = {
- .name = "mAgic",
- .id = -1,
- .num_resources = ARRAY_SIZE(mAgic_resources),
- .resource = mAgic_resources,
-};
-
-void __init at91_add_device_mAgic(void)
-{
- platform_device_register(&mAgic_device);
-}
-#else
-void __init at91_add_device_mAgic(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c
deleted file mode 100644
index dfa896d7d5a..00000000000
--- a/arch/arm/mach-at91/board-at572d940hf_ek.c
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * linux/arch/arm/mach-at91/board-at572d940hf_ek.c
- *
- * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ds1305.h>
-#include <linux/irq.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "sam9_smc.h"
-#include "generic.h"
-
-
-static void __init eb_init_early(void)
-{
- /* Initialize processor: 12.500 MHz crystal */
- at572d940hf_initialize(12000000);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US0, 1, 0);
-
- /* USART1 on ttyS2. (Rx & Tx only) */
- at91_register_uart(AT572D940HF_ID_US1, 2, 0);
-
- /* USART2 on ttyS3. (Tx & Rx only */
- at91_register_uart(AT572D940HF_ID_US2, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init eb_init_irq(void)
-{
- at572d940hf_init_interrupts(NULL);
-}
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata eb_usbh_data = {
- .ports = 2,
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata eb_udc_data = {
- .vbus_pin = 0, /* no VBUS detection,UDC always on */
- .pullup_pin = 0, /* pull-up driven by UDC */
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct at91_mmc_data __initdata eb_mmc_data = {
- .wire4 = 1,
-/* .det_pin = ... not connected */
-/* .wp_pin = ... not connected */
-/* .vcc_pin = ... not connected */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct at91_eth_data __initdata eb_eth_data = {
- .phy_irq_pin = AT91_PIN_PB25,
- .is_rmii = 1,
-};
-
-/*
- * NOR flash
- */
-
-static struct mtd_partition eb_nor_partitions[] = {
- {
- .name = "Raw Environment",
- .offset = 0,
- .size = SZ_4M,
- .mask_flags = 0,
- },
- {
- .name = "OS FS",
- .offset = MTDPART_OFS_APPEND,
- .size = 3 * SZ_1M,
- .mask_flags = 0,
- },
- {
- .name = "APP FS",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0,
- },
-};
-
-static void nor_flash_set_vpp(struct map_info* mi, int i) {
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = eb_nor_partitions,
- .nr_parts = ARRAY_SIZE(eb_nor_partitions),
- .set_vpp = nor_flash_set_vpp,
-};
-
-static struct resource nor_flash_resources[] = {
- {
- .start = AT91_CHIPSELECT_0,
- .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-static struct sam9_smc_config __initdata eb_nor_smc_config = {
- .ncs_read_setup = 1,
- .nrd_setup = 1,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 7,
- .nrd_pulse = 7,
- .ncs_write_pulse = 7,
- .nwe_pulse = 7,
-
- .read_cycle = 9,
- .write_cycle = 9,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32,
- .tdf_cycles = 1,
-};
-
-static void __init eb_add_device_nor(void)
-{
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, &eb_nor_smc_config);
- platform_device_register(&nor_flash);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata eb_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_16M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(eb_nand_partition);
- return eb_nand_partition;
-}
-
-static struct atmel_nand_data __initdata eb_nand_data = {
- .ale = 22,
- .cle = 21,
-/* .det_pin = ... not connected */
-/* .rdy_pin = AT91_PIN_PC16, */
- .enable_pin = AT91_PIN_PA15,
- .partition_info = nand_partitions,
-};
-
-static struct sam9_smc_config __initdata eb_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 1,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 12,
-};
-
-static void __init eb_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = !board_have_nand_8bit();
- /* setup bus-width (8 or 16) */
- if (eb_nand_data.bus_width_16)
- eb_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- eb_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &eb_nand_smc_config);
-
- at91_add_device_nand(&eb_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct resource rtc_resources[] = {
- [0] = {
- .start = AT572D940HF_ID_IRQ1,
- .end = AT572D940HF_ID_IRQ1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct ds1305_platform_data ds1306_data = {
- .is_ds1306 = true,
- .en_1hz = false,
-};
-
-static struct spi_board_info eb_spi_devices[] = {
- { /* RTC Dallas DS1306 */
- .modalias = "rtc-ds1305",
- .chip_select = 3,
- .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA,
- .max_speed_hz = 500000,
- .bus_num = 0,
- .irq = AT572D940HF_ID_IRQ1,
- .platform_data = (void *) &ds1306_data,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* Dataflash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-};
-
-static void __init eb_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&eb_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NOR */
- eb_add_device_nor();
- /* NAND */
- eb_add_device_nand();
- /* SPI */
- at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices));
- /* MMC */
- at91_add_device_mmc(0, &eb_mmc_data);
- /* Ethernet */
- at91_add_device_eth(&eb_eth_data);
- /* mAgic */
- at91_add_device_mAgic();
-}
-
-MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
- /* Maintainer: Atmel <costa.antonior@gmail.com> */
- .timer = &at91sam926x_timer,
- .map_io = at572d940hf_map_io,
- .init_early = eb_init_early,
- .init_irq = eb_init_irq,
- .init_machine = eb_board_init,
-MACHINE_END
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index ac103cbdbf3..61873f3aa92 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -599,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
} else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10() || cpu_is_at572d940hf()) {
+ cpu_is_at91sam9g10()) {
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
udpck.pmc_mask = AT91SAM926x_PMC_UDP;
} else if (cpu_is_at91cap9()) {
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 5783bd1b6c4..8ff3418f343 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -19,7 +19,6 @@ extern void __init at91sam9rl_map_io(void);
extern void __init at91sam9g45_map_io(void);
extern void __init at91x40_map_io(void);
extern void __init at91cap9_map_io(void);
-extern void __init at572d940hf_map_io(void);
/* Processors */
extern void __init at91rm9200_set_type(int type);
@@ -31,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock);
extern void __init at91sam9g45_initialize(unsigned long main_clock);
extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91cap9_initialize(unsigned long main_clock);
-extern void __init at572d940hf_initialize(unsigned long main_clock);
/* Interrupts */
extern void __init at91rm9200_init_interrupts(unsigned int priority[]);
@@ -42,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]);
extern void __init at91sam9g45_init_interrupts(unsigned int priority[]);
extern void __init at91x40_init_interrupts(unsigned int priority[]);
extern void __init at91cap9_init_interrupts(unsigned int priority[]);
-extern void __init at572d940hf_init_interrupts(unsigned int priority[]);
extern void __init at91_aic_init(unsigned int priority[]);
/* Timer */
@@ -65,7 +62,6 @@ extern void __init at91sam9263_set_console_clock(int id);
extern void __init at91sam9rl_set_console_clock(int id);
extern void __init at91sam9g45_set_console_clock(int id);
extern void __init at91cap9_set_console_clock(int id);
-extern void __init at572d940hf_set_console_clock(int id);
struct device;
/* Power Management */
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h
deleted file mode 100644
index a738dc7e5d4..00000000000
--- a/arch/arm/mach-at91/include/mach/at572d940hf.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/mach/at572d940hf.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#ifndef AT572D940HF_H
-#define AT572D940HF_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */
-#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */
-#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */
-#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */
-#define AT572D940HF_ID_US0 6 /* USART 0 */
-#define AT572D940HF_ID_US1 7 /* USART 1 */
-#define AT572D940HF_ID_US2 8 /* USART 2 */
-#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */
-#define AT572D940HF_ID_UDP 10 /* USB Device Port */
-#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */
-#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */
-#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */
-#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */
-#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */
-#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */
-#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */
-#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */
-#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */
-#define AT572D940HF_ID_UHP 20 /* USB Host port */
-#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */
-#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */
-#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */
-#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */
-#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */
-#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */
-#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */
-#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */
-#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */
-#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */
-#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT572D940HF_BASE_TCB 0xfffa0000
-#define AT572D940HF_BASE_TC0 0xfffa0000
-#define AT572D940HF_BASE_TC1 0xfffa0040
-#define AT572D940HF_BASE_TC2 0xfffa0080
-#define AT572D940HF_BASE_UDP 0xfffa4000
-#define AT572D940HF_BASE_MCI 0xfffa8000
-#define AT572D940HF_BASE_TWI0 0xfffac000
-#define AT572D940HF_BASE_US0 0xfffb0000
-#define AT572D940HF_BASE_US1 0xfffb4000
-#define AT572D940HF_BASE_US2 0xfffb8000
-#define AT572D940HF_BASE_SSC0 0xfffbc000
-#define AT572D940HF_BASE_SSC1 0xfffc0000
-#define AT572D940HF_BASE_SSC2 0xfffc4000
-#define AT572D940HF_BASE_SPI0 0xfffc8000
-#define AT572D940HF_BASE_SPI1 0xfffcc000
-#define AT572D940HF_BASE_SSC3 0xfffd0000
-#define AT572D940HF_BASE_TWI1 0xfffd4000
-#define AT572D940HF_BASE_EMAC 0xfffd8000
-#define AT572D940HF_BASE_CAN0 0xfffdc000
-#define AT572D940HF_BASE_CAN1 0xfffe0000
-#define AT91_BASE_SYS 0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC (0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC (0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
-#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS)
-
-#define AT91_USART0 AT572D940HF_ID_US0
-#define AT91_USART1 AT572D940HF_ID_US1
-#define AT91_USART2 AT572D940HF_ID_US2
-
-
-/*
- * Internal Memory.
- */
-#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */
-#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */
-
-#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */
-#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */
-
-#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
deleted file mode 100644
index b6751df0948..00000000000
--- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * include/mach//at572d940hf_matrix.h
- *
- * Antonio R. Costa <costa.antonior@gmail.com>
- * Copyright (C) 2008 Atmel
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef AT572D940HF_MATRIX_H
-#define AT572D940HF_MATRIX_H
-
-#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */
-
-#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */
-#define AT91_MATRIX_ULBT_INFINITE (0 << 0)
-#define AT91_MATRIX_ULBT_SINGLE (1 << 0)
-#define AT91_MATRIX_ULBT_FOUR (2 << 0)
-#define AT91_MATRIX_ULBT_EIGHT (3 << 0)
-#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0)
-
-#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */
-#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */
-#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */
-#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16)
-#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16)
-#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */
-#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */
-#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24)
-#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24)
-
-#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */
-
-#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */
-#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */
-#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */
-#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */
-#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */
-#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */
-#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */
-
-#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */
-#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */
-#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */
-#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */
-#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */
-#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */
-#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */
-#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */
-#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */
-#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */
-#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */
-#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */
-#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */
-#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */
-#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */
-#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */
-#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */
-
-
-/*
- * The following registers / bits are not defined in the Datasheet (Revision A)
- */
-
-#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */
-#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */
-#define AT91_MATRIX_ITCM_0 (0 << 0)
-#define AT91_MATRIX_ITCM_16 (5 << 0)
-#define AT91_MATRIX_ITCM_32 (6 << 0)
-#define AT91_MATRIX_ITCM_64 (7 << 0)
-#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */
-#define AT91_MATRIX_DTCM_0 (0 << 4)
-#define AT91_MATRIX_DTCM_16 (5 << 4)
-#define AT91_MATRIX_DTCM_32 (6 << 4)
-#define AT91_MATRIX_DTCM_64 (7 << 4)
-
-#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */
-#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */
-#define AT91_MATRIX_CS1A_SMC (0 << 1)
-#define AT91_MATRIX_CS1A_SDRAMC (1 << 1)
-#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */
-#define AT91_MATRIX_CS3A_SMC (0 << 3)
-#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3)
-#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */
-#define AT91_MATRIX_CS4A_SMC (0 << 4)
-#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4)
-#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */
-#define AT91_MATRIX_CS5A_SMC (0 << 5)
-#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5)
-#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index c44e94e2285..ed544a0d5a1 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -90,7 +90,7 @@ struct at91_eth_data {
extern void __init at91_add_device_eth(struct at91_eth_data *data);
#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \
- || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF)
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#define eth_platform_data at91_eth_data
#endif
@@ -204,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
extern void __init at91_pwm_leds(struct gpio_led *leds, int nr);
- /* AT572D940HF DSP */
-extern void __init at91_add_device_mAgic(void);
-
/* FIXME: this needs a better location, but gets stuff building again */
extern int at91_suspend_entering_slow_clock(void);
diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h
index ab00372ca04..df966c2bc2d 100644
--- a/arch/arm/mach-at91/include/mach/cpu.h
+++ b/arch/arm/mach-at91/include/mach/cpu.h
@@ -34,8 +34,6 @@
#define ARCH_ID_AT91SAM9XE256 0x329a93a0
#define ARCH_ID_AT91SAM9XE512 0x329aa3a0
-#define ARCH_ID_AT572D940HF 0x0e0303e0
-
#define ARCH_ID_AT91M40800 0x14080044
#define ARCH_ID_AT91R40807 0x44080746
#define ARCH_ID_AT91M40807 0x14080745
@@ -188,12 +186,6 @@ extern int rm9200_type;
#define cpu_is_at91cap9_revC() (0)
#endif
-#ifdef CONFIG_ARCH_AT572D940HF
-#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF)
-#else
-#define cpu_is_at572d940hf() (0)
-#endif
-
/*
* Since this is ARM, we will never run on any AVR32 CPU. But these
* definitions may reduce clutter in common drivers.
diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h
index 469d3af5a55..1008b9fb507 100644
--- a/arch/arm/mach-at91/include/mach/hardware.h
+++ b/arch/arm/mach-at91/include/mach/hardware.h
@@ -32,8 +32,6 @@
#include <mach/at91cap9.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <mach/at91x40.h>
-#elif defined(CONFIG_ARCH_AT572D940HF)
-#include <mach/at572d940hf.h>
#else
#error "Unsupported AT91 processor"
#endif
diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h
index 05a6e8af80c..31ac2d97f14 100644
--- a/arch/arm/mach-at91/include/mach/timex.h
+++ b/arch/arm/mach-at91/include/mach/timex.h
@@ -82,11 +82,6 @@
#define AT91X40_MASTER_CLOCK 40000000
#define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK)
-#elif defined(CONFIG_ARCH_AT572D940HF)
-
-#define AT572D940HF_MASTER_CLOCK 80000000
-#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16)
-
#endif
#endif
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-13 01:18:57 +0000