diff options
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/mach-tegra/include/mach/entry-macro.S | 64 |
1 files changed, 1 insertions, 63 deletions
diff --git a/arch/arm/mach-tegra/include/mach/entry-macro.S b/arch/arm/mach-tegra/include/mach/entry-macro.S index 2ba9e5c9d2f..dc092491518 100644 --- a/arch/arm/mach-tegra/include/mach/entry-macro.S +++ b/arch/arm/mach-tegra/include/mach/entry-macro.S @@ -17,7 +17,7 @@ #if defined(CONFIG_ARM_GIC) -#include <asm/hardware/gic.h> +#include <asm/hardware/entry-macro-gic.S> /* Uses the GIC interrupt controller built into the cpu */ #define ICTRL_BASE (IO_CPU_VIRT + 0x100) @@ -32,68 +32,6 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt - * if it's between 30 and 1020. The test_for_ipi routine below will - * pick up on IPIs. - * - * A simple read from the controller will tell us the number of the - * highest priority enabled interrupt. We then just need to check - * whether it is in the valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - /* bits 12-10 = src CPU, 9-0 = int # */ - ldr \irqstat, [\base, #GIC_CPU_INTACK] - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #29 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm - - /* As above, this assumes that irqstat and base are preserved.. */ - - .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 - .endm - #else /* legacy interrupt controller for AP16 */ .macro disable_fiq |