diff options
Diffstat (limited to 'arch')
422 files changed, 18643 insertions, 10853 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 8b5d174685f..591ca0cd4c2 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -41,7 +41,7 @@ config AR7 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_ZBOOT_UART16550 - select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB select GCD select VLYNQ help @@ -180,7 +180,7 @@ config LASAT config MACH_LOONGSON bool "Loongson family of machines" - select SYS_SUPPORTS_ZBOOT_UART16550 + select SYS_SUPPORTS_ZBOOT help This enables the support of Loongson family of machines. @@ -1295,7 +1295,6 @@ config CPU_CAVIUM_OCTEON select SYS_SUPPORTS_SMP select NR_CPUS_DEFAULT_16 select WEAK_ORDERING - select WEAK_REORDERING_BEYOND_LLSC select CPU_SUPPORTS_HIGHMEM select CPU_SUPPORTS_HUGEPAGES help @@ -1726,6 +1725,9 @@ config SB1_PASS_2_1_WORKAROUNDS config 64BIT_PHYS_ADDR bool +config ARCH_PHYS_ADDR_T_64BIT + def_bool 64BIT_PHYS_ADDR + config CPU_HAS_SMARTMIPS depends on SYS_SUPPORTS_SMARTMIPS bool "Support for the SmartMIPS ASE" diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug index d2b88a0be51..43dc2799773 100644 --- a/arch/mips/Kconfig.debug +++ b/arch/mips/Kconfig.debug @@ -102,4 +102,30 @@ config RUNTIME_DEBUG arch/mips/include/asm/debug.h for debugging macros. If unsure, say N. +config DEBUG_ZBOOT + bool "Enable compressed kernel support debugging" + depends on DEBUG_KERNEL && SYS_SUPPORTS_ZBOOT + default n + help + If you want to add compressed kernel support to a new board, and the + board supports uart16550 compatible serial port, please select + SYS_SUPPORTS_ZBOOT_UART16550 for your board and enable this option to + debug it. + + If your board doesn't support uart16550 compatible serial port, you + can try to select SYS_SUPPORTS_ZBOOT and use the other methods to + debug it. for example, add a new serial port support just as + arch/mips/boot/compressed/uart-16550.c does. + + After the compressed kernel support works, please disable this option + to reduce the kernel image size and speed up the booting procedure a + little. + +config SPINLOCK_TEST + bool "Enable spinlock timing tests in debugfs" + depends on DEBUG_FS + default n + help + Add several files to the debugfs to test spinlock speed. + endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1893efd43fc..2f2eac23332 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -185,6 +185,15 @@ libs-$(CONFIG_SNIPROM) += arch/mips/fw/sni/ libs-y += arch/mips/fw/lib/ # +# Kernel compression +# +ifdef SYS_SUPPORTS_ZBOOT +COMPRESSION_FNAME = vmlinuz +else +COMPRESSION_FNAME = vmlinux +endif + +# # Board-dependent options and extra files # @@ -332,11 +341,11 @@ load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # # Loongson family # -core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ +core-$(CONFIG_MACH_LOONGSON) += arch/mips/loongson/ cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ -mno-branch-likely -load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 -load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000 +load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000 +load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000 # # MIPS Malta board @@ -344,7 +353,7 @@ load-$(CONFIG_LEMOTE_MACH2F) +=0xffffffff80200000 core-$(CONFIG_MIPS_MALTA) += arch/mips/mti-malta/ cflags-$(CONFIG_MIPS_MALTA) += -I$(srctree)/arch/mips/include/asm/mach-malta load-$(CONFIG_MIPS_MALTA) += 0xffffffff80100000 -all-$(CONFIG_MIPS_MALTA) := vmlinuz.bin +all-$(CONFIG_MIPS_MALTA) := $(COMPRESSION_FNAME).bin # # MIPS SIM @@ -594,7 +603,7 @@ load-$(CONFIG_SNI_RM) += 0xffffffff80600000 else load-$(CONFIG_SNI_RM) += 0xffffffff80030000 endif -all-$(CONFIG_SNI_RM) := vmlinuz.ecoff +all-$(CONFIG_SNI_RM) := $(COMPRESSION_FNAME).ecoff # # Common TXx9 diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 00b498e97c8..df3b1a7eb15 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -1,5 +1,5 @@ -# au1000-style gpio -config ALCHEMY_GPIO_AU1000 +# au1000-style gpio and interrupt controllers +config ALCHEMY_GPIOINT_AU1000 bool # select this in your board config if you don't want to use the gpio @@ -20,12 +20,14 @@ config MIPS_MTX1 select HW_HAS_PCI select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_BOSPORUS bool "Alchemy Bosporus board" select SOC_AU1500 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1000 bool "Alchemy DB1000 board" @@ -33,12 +35,14 @@ config MIPS_DB1000 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1100 bool "Alchemy DB1100 board" select SOC_AU1100 select DMA_NONCOHERENT select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1200 bool "Alchemy DB1200 board" @@ -46,6 +50,7 @@ config MIPS_DB1200 select DMA_COHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1500 bool "Alchemy DB1500 board" @@ -55,6 +60,7 @@ config MIPS_DB1500 select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_DB1550 bool "Alchemy DB1550 board" @@ -63,12 +69,14 @@ config MIPS_DB1550 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_MIRAGE bool "Alchemy Mirage board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1000 bool "Alchemy PB1000 board" @@ -77,6 +85,7 @@ config MIPS_PB1000 select HW_HAS_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1100 bool "Alchemy PB1100 board" @@ -85,6 +94,7 @@ config MIPS_PB1100 select HW_HAS_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1200 bool "Alchemy PB1200 board" @@ -92,6 +102,7 @@ config MIPS_PB1200 select DMA_NONCOHERENT select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1500 bool "Alchemy PB1500 board" @@ -99,6 +110,7 @@ config MIPS_PB1500 select DMA_NONCOHERENT select HW_HAS_PCI select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_PB1550 bool "Alchemy PB1550 board" @@ -107,39 +119,41 @@ config MIPS_PB1550 select HW_HAS_PCI select MIPS_DISABLE_OBSOLETE_IDE select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK config MIPS_XXS1500 bool "MyCable XXS1500 board" select DMA_NONCOHERENT select SOC_AU1500 select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_HAS_EARLY_PRINTK endchoice config SOC_AU1000 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1100 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1500 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1550 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1200 bool select SOC_AU1X00 - select ALCHEMY_GPIO_AU1000 + select ALCHEMY_GPIOINT_AU1000 config SOC_AU1X00 bool diff --git a/arch/mips/alchemy/common/Makefile b/arch/mips/alchemy/common/Makefile index b67fb512529..06c0e65a54b 100644 --- a/arch/mips/alchemy/common/Makefile +++ b/arch/mips/alchemy/common/Makefile @@ -5,14 +5,15 @@ # Makefile for the Alchemy Au1xx0 CPUs, generic files. # -obj-y += prom.o irq.o puts.o time.o reset.o \ - clocks.o platform.o power.o setup.o \ +obj-y += prom.o time.o clocks.o platform.o power.o setup.o \ sleeper.o dma.o dbdma.o +obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += irq.o + # optional gpiolib support ifeq ($(CONFIG_ALCHEMY_GPIO_INDIRECT),) ifeq ($(CONFIG_GPIOLIB),y) - obj-$(CONFIG_ALCHEMY_GPIO_AU1000) += gpiolib-au1000.o + obj-$(CONFIG_ALCHEMY_GPIOINT_AU1000) += gpiolib-au1000.o endif endif diff --git a/arch/mips/alchemy/common/clocks.c b/arch/mips/alchemy/common/clocks.c index d8991854530..460c6285c1b 100644 --- a/arch/mips/alchemy/common/clocks.c +++ b/arch/mips/alchemy/common/clocks.c @@ -40,8 +40,6 @@ static unsigned int au1x00_clock; /* Hz */ static unsigned long uart_baud_base; -static DEFINE_SPINLOCK(time_lock); - /* * Set the au1000_clock */ @@ -84,9 +82,6 @@ void set_au1x00_uart_baud_base(unsigned long new_baud_base) unsigned long au1xxx_calc_clock(void) { unsigned long cpu_speed; - unsigned long flags; - - spin_lock_irqsave(&time_lock, flags); /* * On early Au1000, sys_cpupll was write-only. Since these @@ -108,8 +103,6 @@ unsigned long au1xxx_calc_clock(void) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2) * 16)); - spin_unlock_irqrestore(&time_lock, flags); - set_au1x00_speed(cpu_speed); return cpu_speed; diff --git a/arch/mips/alchemy/common/dbdma.c b/arch/mips/alchemy/common/dbdma.c index f9201ca2295..99ae84ce5af 100644 --- a/arch/mips/alchemy/common/dbdma.c +++ b/arch/mips/alchemy/common/dbdma.c @@ -30,6 +30,7 @@ * */ +#include <linux/init.h> #include <linux/kernel.h> #include <linux/slab.h> #include <linux/spinlock.h> @@ -58,7 +59,6 @@ static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock); static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE; static int dbdma_initialized; -static void au1xxx_dbdma_init(void); static dbdev_tab_t dbdev_tab[] = { #ifdef CONFIG_SOC_AU1550 @@ -237,7 +237,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) { unsigned long flags; - u32 used, chan, rv; + u32 used, chan; u32 dcp; int i; dbdev_tab_t *stp, *dtp; @@ -250,8 +250,7 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, * which can't be done successfully during board set up. */ if (!dbdma_initialized) - au1xxx_dbdma_init(); - dbdma_initialized = 1; + return 0; stp = find_dbdev_id(srcid); if (stp == NULL) @@ -261,7 +260,6 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, return 0; used = 0; - rv = 0; /* Check to see if we can get both channels. */ spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); @@ -282,63 +280,65 @@ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, used++; spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - if (!used) { - /* Let's see if we can allocate a channel for it. */ - ctp = NULL; - chan = 0; - spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); - for (i = 0; i < NUM_DBDMA_CHANS; i++) - if (chan_tab_ptr[i] == NULL) { - /* - * If kmalloc fails, it is caught below same - * as a channel not available. - */ - ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); - chan_tab_ptr[i] = ctp; - break; - } - spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); - - if (ctp != NULL) { - memset(ctp, 0, sizeof(chan_tab_t)); - ctp->chan_index = chan = i; - dcp = DDMA_CHANNEL_BASE; - dcp += (0x0100 * chan); - ctp->chan_ptr = (au1x_dma_chan_t *)dcp; - cp = (au1x_dma_chan_t *)dcp; - ctp->chan_src = stp; - ctp->chan_dest = dtp; - ctp->chan_callback = callback; - ctp->chan_callparam = callparam; - - /* Initialize channel configuration. */ - i = 0; - if (stp->dev_intlevel) - i |= DDMA_CFG_SED; - if (stp->dev_intpolarity) - i |= DDMA_CFG_SP; - if (dtp->dev_intlevel) - i |= DDMA_CFG_DED; - if (dtp->dev_intpolarity) - i |= DDMA_CFG_DP; - if ((stp->dev_flags & DEV_FLAGS_SYNC) || - (dtp->dev_flags & DEV_FLAGS_SYNC)) - i |= DDMA_CFG_SYNC; - cp->ddma_cfg = i; - au_sync(); + if (used) + return 0; - /* Return a non-zero value that can be used to - * find the channel information in subsequent - * operations. + /* Let's see if we can allocate a channel for it. */ + ctp = NULL; + chan = 0; + spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags); + for (i = 0; i < NUM_DBDMA_CHANS; i++) + if (chan_tab_ptr[i] == NULL) { + /* + * If kmalloc fails, it is caught below same + * as a channel not available. */ - rv = (u32)(&chan_tab_ptr[chan]); - } else { - /* Release devices */ - stp->dev_flags &= ~DEV_FLAGS_INUSE; - dtp->dev_flags &= ~DEV_FLAGS_INUSE; + ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC); + chan_tab_ptr[i] = ctp; + break; } + spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags); + + if (ctp != NULL) { + memset(ctp, 0, sizeof(chan_tab_t)); + ctp->chan_index = chan = i; + dcp = DDMA_CHANNEL_BASE; + dcp += (0x0100 * chan); + ctp->chan_ptr = (au1x_dma_chan_t *)dcp; + cp = (au1x_dma_chan_t *)dcp; + ctp->chan_src = stp; + ctp->chan_dest = dtp; + ctp->chan_callback = callback; + ctp->chan_callparam = callparam; + + /* Initialize channel configuration. */ + i = 0; + if (stp->dev_intlevel) + i |= DDMA_CFG_SED; + if (stp->dev_intpolarity) + i |= DDMA_CFG_SP; + if (dtp->dev_intlevel) + i |= DDMA_CFG_DED; + if (dtp->dev_intpolarity) + i |= DDMA_CFG_DP; + if ((stp->dev_flags & DEV_FLAGS_SYNC) || + (dtp->dev_flags & DEV_FLAGS_SYNC)) + i |= DDMA_CFG_SYNC; + cp->ddma_cfg = i; + au_sync(); + + /* + * Return a non-zero value that can be used to find the channel + * information in subsequent operations. + */ + return (u32)(&chan_tab_ptr[chan]); } - return rv; + + /* Release devices */ + stp->dev_flags &= ~DEV_FLAGS_INUSE; + dtp->dev_flags &= ~DEV_FLAGS_INUSE; + + return 0; } EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc); @@ -572,7 +572,7 @@ EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc); * This updates the source pointer and byte count. Normally used * for memory to fifo transfers. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -598,7 +598,7 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) return 0; /* Load up buffer address and byte count. */ - dp->dscr_source0 = virt_to_phys(buf); + dp->dscr_source0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; /* Check flags */ if (flags & DDMA_FLAGS_IE) @@ -625,14 +625,13 @@ u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_source); +EXPORT_SYMBOL(au1xxx_dbdma_put_source); /* Put a destination buffer into the DMA ring. * This updates the destination pointer and byte count. Normally used * to place an empty buffer into the ring for fifo to memory transfers. */ -u32 -_au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags) { chan_tab_t *ctp; au1x_ddma_desc_t *dp; @@ -662,7 +661,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) if (flags & DDMA_FLAGS_NOIE) dp->dscr_cmd0 &= ~DSCR_CMD0_IE; - dp->dscr_dest0 = virt_to_phys(buf); + dp->dscr_dest0 = buf & ~0UL; dp->dscr_cmd1 = nbytes; #if 0 printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n", @@ -688,7 +687,7 @@ _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags) /* Return something non-zero. */ return nbytes; } -EXPORT_SYMBOL(_au1xxx_dbdma_put_dest); +EXPORT_SYMBOL(au1xxx_dbdma_put_dest); /* * Get a destination buffer into the DMA ring. @@ -871,28 +870,6 @@ static irqreturn_t dbdma_interrupt(int irq, void *dev_id) return IRQ_RETVAL(1); } -static void au1xxx_dbdma_init(void) -{ - int irq_nr; - - dbdma_gptr->ddma_config = 0; - dbdma_gptr->ddma_throttle = 0; - dbdma_gptr->ddma_inten = 0xffff; - au_sync(); - -#if defined(CONFIG_SOC_AU1550) - irq_nr = AU1550_DDMA_INT; -#elif defined(CONFIG_SOC_AU1200) - irq_nr = AU1200_DDMA_INT; -#else - #error Unknown Au1x00 SOC -#endif - - if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, - "Au1xxx dbdma", (void *)dbdma_gptr)) - printk(KERN_ERR "Can't get 1550 dbdma irq"); -} - void au1xxx_dbdma_dump(u32 chanid) { chan_tab_t *ctp; @@ -906,7 +883,7 @@ void au1xxx_dbdma_dump(u32 chanid) dtp = ctp->chan_dest; cp = ctp->chan_ptr; - printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n", + printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n", (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab); printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n", @@ -1041,4 +1018,38 @@ void au1xxx_dbdma_resume(void) } } #endif /* CONFIG_PM */ + +static int __init au1xxx_dbdma_init(void) +{ + int irq_nr, ret; + + dbdma_gptr->ddma_config = 0; + dbdma_gptr->ddma_throttle = 0; + dbdma_gptr->ddma_inten = 0xffff; + au_sync(); + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1550: + irq_nr = AU1550_DDMA_INT; + break; + case ALCHEMY_CPU_AU1200: + irq_nr = AU1200_DDMA_INT; + break; + default: + return -ENODEV; + } + + ret = request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED, + "Au1xxx dbdma", (void *)dbdma_gptr); + if (ret) + printk(KERN_ERR "Cannot grab DBDMA interrupt!\n"); + else { + dbdma_initialized = 1; + printk(KERN_INFO "Alchemy DBDMA initialized\n"); + } + + return ret; +} +subsys_initcall(au1xxx_dbdma_init); + #endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */ diff --git a/arch/mips/alchemy/common/dma.c b/arch/mips/alchemy/common/dma.c index d6fbda232e6..d5278877891 100644 --- a/arch/mips/alchemy/common/dma.c +++ b/arch/mips/alchemy/common/dma.c @@ -29,6 +29,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. * */ + +#include <linux/init.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/errno.h> @@ -188,17 +190,14 @@ int request_au1000_dma(int dev_id, const char *dev_str, dev = &dma_dev_table[dev_id]; if (irqhandler) { - chan->irq = AU1000_DMA_INT_BASE + i; chan->irq_dev = irq_dev_id; ret = request_irq(chan->irq, irqhandler, irqflags, dev_str, chan->irq_dev); if (ret) { - chan->irq = 0; chan->irq_dev = NULL; return ret; } } else { - chan->irq = 0; chan->irq_dev = NULL; } @@ -226,13 +225,40 @@ void free_au1000_dma(unsigned int dmanr) } disable_dma(dmanr); - if (chan->irq) + if (chan->irq_dev) free_irq(chan->irq, chan->irq_dev); - chan->irq = 0; chan->irq_dev = NULL; chan->dev_id = -1; } EXPORT_SYMBOL(free_au1000_dma); +static int __init au1000_dma_init(void) +{ + int base, i; + + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + base = AU1000_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1500: + base = AU1500_DMA_INT_BASE; + break; + case ALCHEMY_CPU_AU1100: + base = AU1100_DMA_INT_BASE; + break; + default: + goto out; + } + + for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) + au1000_dma_table[i].irq = base + i; + + printk(KERN_INFO "Alchemy DMA initialized\n"); + +out: + return 0; +} +arch_initcall(au1000_dma_init); + #endif /* AU1000 AU1500 AU1100 */ diff --git a/arch/mips/alchemy/common/gpiolib-au1000.c b/arch/mips/alchemy/common/gpiolib-au1000.c index 1bfa91f939f..c8e1a94d4a9 100644 --- a/arch/mips/alchemy/common/gpiolib-au1000.c +++ b/arch/mips/alchemy/common/gpiolib-au1000.c @@ -36,7 +36,6 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio.h> -#if !defined(CONFIG_SOC_AU1000) static int gpio2_get(struct gpio_chip *chip, unsigned offset) { return alchemy_gpio2_get_value(offset + ALCHEMY_GPIO2_BASE); @@ -63,7 +62,7 @@ static int gpio2_to_irq(struct gpio_chip *chip, unsigned offset) { return alchemy_gpio2_to_irq(offset + ALCHEMY_GPIO2_BASE); } -#endif /* !defined(CONFIG_SOC_AU1000) */ + static int gpio1_get(struct gpio_chip *chip, unsigned offset) { @@ -104,7 +103,6 @@ struct gpio_chip alchemy_gpio_chip[] = { .base = ALCHEMY_GPIO1_BASE, .ngpio = ALCHEMY_GPIO1_NUM, }, -#if !defined(CONFIG_SOC_AU1000) [1] = { .label = "alchemy-gpio2", .direction_input = gpio2_direction_input, @@ -115,15 +113,13 @@ struct gpio_chip alchemy_gpio_chip[] = { .base = ALCHEMY_GPIO2_BASE, .ngpio = ALCHEMY_GPIO2_NUM, }, -#endif }; static int __init alchemy_gpiolib_init(void) { gpiochip_add(&alchemy_gpio_chip[0]); -#if !defined(CONFIG_SOC_AU1000) - gpiochip_add(&alchemy_gpio_chip[1]); -#endif + if (alchemy_get_cputype() != ALCHEMY_CPU_AU1000) + gpiochip_add(&alchemy_gpio_chip[1]); return 0; } diff --git a/arch/mips/alchemy/common/irq.c b/arch/mips/alchemy/common/irq.c index d670928afcf..b2821ace4d0 100644 --- a/arch/mips/alchemy/common/irq.c +++ b/arch/mips/alchemy/common/irq.c @@ -39,168 +39,180 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type); +/* NOTE on interrupt priorities: The original writers of this code said: + * + * Because of the tight timing of SETUP token to reply transactions, + * the USB devices-side packet complete interrupt (USB_DEV_REQ_INT) + * needs the highest priority. + */ + /* per-processor fixed function irqs */ -struct au1xxx_irqmap au1xxx_ic0_map[] __initdata = { - -#if defined(CONFIG_SOC_AU1000) - { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1500) - - { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1100) - - { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, +struct au1xxx_irqmap { + int im_irq; + int im_type; + int im_request; /* set 1 to get higher priority */ +}; + +struct au1xxx_irqmap au1000_irqmap[] __initdata = { + { AU1000_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1000_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, { AU1000_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, - -#elif defined(CONFIG_SOC_AU1550) - - { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1000_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1000_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1000_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, +}; + +struct au1xxx_irqmap au1500_irqmap[] __initdata = { + { AU1500_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1500_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, + { AU1500_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1500_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1500_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1500_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, +}; + +struct au1xxx_irqmap au1100_irqmap[] __initdata = { + { AU1100_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SSI0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_SSI1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+1, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+2, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+3, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+4, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+5, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+6, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_DMA_INT_BASE+7, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1100_IRDA_TX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_IRDA_RX_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, + { AU1100_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1100_ACSYNC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1100_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1100_AC97C_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { -1, }, +}; + +struct au1xxx_irqmap au1550_irqmap[] __initdata = { + { AU1550_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PCI_INTA, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_INTB, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_CRYPTO_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PCI_INTC, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_INTD, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_PCI_RST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_UART3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC2_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_PSC3_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1550_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1550_USB_DEV_REQ_INT, IRQ_TYPE_LEVEL_HIGH, 1 }, { AU1550_USB_DEV_SUS_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, - { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - -#elif defined(CONFIG_SOC_AU1200) - - { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1000_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, - { AU1000_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1000_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, - { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, - -#else -#error "Error: Unknown Alchemy SOC" -#endif + { AU1550_USB_HOST_INT, IRQ_TYPE_LEVEL_LOW, 0 }, + { AU1550_MAC0_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1550_MAC1_DMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { -1, }, +}; + +struct au1xxx_irqmap au1200_irqmap[] __initdata = { + { AU1200_UART0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_SWT_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_SD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_DDMA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_BE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_UART1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_FE_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_PSC0_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_PSC1_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_AES_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_CAMERA_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_TOY_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_TOY_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH0_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH1_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_RTC_MATCH2_INT, IRQ_TYPE_EDGE_RISING, 1 }, + { AU1200_NAND_INT, IRQ_TYPE_EDGE_RISING, 0 }, + { AU1200_USB_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_LCD_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { AU1200_MAE_BOTH_INT, IRQ_TYPE_LEVEL_HIGH, 0 }, + { -1, }, }; @@ -306,7 +318,7 @@ static void au1x_ic1_unmask(unsigned int irq_nr) * nowhere in the current kernel sources is it disabled. --mlau */ #if defined(CONFIG_MIPS_PB1000) - if (irq_nr == AU1000_GPIO_15) + if (irq_nr == AU1000_GPIO15_INT) au_writel(0x4000, PB1000_MDR); /* enable int */ #endif au_sync(); @@ -378,11 +390,13 @@ static void au1x_ic1_maskack(unsigned int irq_nr) static int au1x_ic1_setwake(unsigned int irq, unsigned int on) { - unsigned int bit = irq - AU1000_INTC1_INT_BASE; + int bit = irq - AU1000_INTC1_INT_BASE; unsigned long wakemsk, flags; - /* only GPIO 0-7 can act as wakeup source: */ - if ((irq < AU1000_GPIO_0) || (irq > AU1000_GPIO_7)) + /* only GPIO 0-7 can act as wakeup source. Fortunately these + * are wired up identically on all supported variants. + */ + if ((bit < 0) || (bit > 7)) return -EINVAL; local_irq_save(flags); @@ -504,11 +518,11 @@ static int au1x_ic_settype(unsigned int irq, unsigned int flow_type) asmlinkage void plat_irq_dispatch(void) { unsigned int pending = read_c0_status() & read_c0_cause(); - unsigned long s, off, bit; + unsigned long s, off; if (pending & CAUSEF_IP7) { - do_IRQ(MIPS_CPU_IRQ_BASE + 7); - return; + off = MIPS_CPU_IRQ_BASE + 7; + goto handle; } else if (pending & CAUSEF_IP2) { s = IC0_REQ0INT; off = AU1000_INTC0_INT_BASE; @@ -524,58 +538,20 @@ asmlinkage void plat_irq_dispatch(void) } else goto spurious; - bit = 0; s = au_readl(s); if (unlikely(!s)) { spurious: spurious_interrupt(); return; } -#ifdef AU1000_USB_DEV_REQ_INT - /* - * Because of the tight timing of SETUP token to reply - * transactions, the USB devices-side packet complete - * interrupt needs the highest priority. - */ - bit = 1 << (AU1000_USB_DEV_REQ_INT - AU1000_INTC0_INT_BASE); - if ((pending & CAUSEF_IP2) && (s & bit)) { - do_IRQ(AU1000_USB_DEV_REQ_INT); - return; - } -#endif - do_IRQ(__ffs(s) + off); + off += __ffs(s); +handle: + do_IRQ(off); } -/* setup edge/level and assign request 0/1 */ -void __init au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count) +static void __init au1000_init_irq(struct au1xxx_irqmap *map) { unsigned int bit, irq_nr; - - while (count--) { - irq_nr = map[count].im_irq; - - if (((irq_nr < AU1000_INTC0_INT_BASE) || - (irq_nr >= AU1000_INTC0_INT_BASE + 32)) && - ((irq_nr < AU1000_INTC1_INT_BASE) || - (irq_nr >= AU1000_INTC1_INT_BASE + 32))) - continue; - - if (irq_nr >= AU1000_INTC1_INT_BASE) { - bit = irq_nr - AU1000_INTC1_INT_BASE; - if (map[count].im_request) - au_writel(1 << bit, IC1_ASSIGNCLR); - } else { - bit = irq_nr - AU1000_INTC0_INT_BASE; - if (map[count].im_request) - au_writel(1 << bit, IC0_ASSIGNCLR); - } - - au1x_ic_settype(irq_nr, map[count].im_type); - } -} - -void __init arch_init_irq(void) -{ int i; /* @@ -585,7 +561,7 @@ void __init arch_init_irq(void) au_writel(0xffffffff, IC0_CFG1CLR); au_writel(0xffffffff, IC0_CFG2CLR); au_writel(0xffffffff, IC0_MASKCLR); - au_writel(0xffffffff, IC0_ASSIGNSET); + au_writel(0xffffffff, IC0_ASSIGNCLR); au_writel(0xffffffff, IC0_WAKECLR); au_writel(0xffffffff, IC0_SRCSET); au_writel(0xffffffff, IC0_FALLINGCLR); @@ -596,7 +572,7 @@ void __init arch_init_irq(void) au_writel(0xffffffff, IC1_CFG1CLR); au_writel(0xffffffff, IC1_CFG2CLR); au_writel(0xffffffff, IC1_MASKCLR); - au_writel(0xffffffff, IC1_ASSIGNSET); + au_writel(0xffffffff, IC1_ASSIGNCLR); au_writel(0xffffffff, IC1_WAKECLR); au_writel(0xffffffff, IC1_SRCSET); au_writel(0xffffffff, IC1_FALLINGCLR); @@ -619,11 +595,43 @@ void __init arch_init_irq(void) /* * Initialize IC0, which is fixed per processor. */ - au1xxx_setup_irqmap(au1xxx_ic0_map, ARRAY_SIZE(au1xxx_ic0_map)); + while (map->im_irq != -1) { + irq_nr = map->im_irq; - /* Boards can register additional (GPIO-based) IRQs. - */ - board_init_irq(); + if (irq_nr >= AU1000_INTC1_INT_BASE) { + bit = irq_nr - AU1000_INTC1_INT_BASE; + if (map->im_request) + au_writel(1 << bit, IC1_ASSIGNSET); + } else { + bit = irq_nr - AU1000_INTC0_INT_BASE; + if (map->im_request) + au_writel(1 << bit, IC0_ASSIGNSET); + } + + au1x_ic_settype(irq_nr, map->im_type); + ++map; + } set_c0_status(IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3); } + +void __init arch_init_irq(void) +{ + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + au1000_init_irq(au1000_irqmap); + break; + case ALCHEMY_CPU_AU1500: + au1000_init_irq(au1500_irqmap); + break; + case ALCHEMY_CPU_AU1100: + au1000_init_irq(au1100_irqmap); + break; + case ALCHEMY_CPU_AU1550: + au1000_init_irq(au1550_irqmap); + break; + case ALCHEMY_CPU_AU1200: + au1000_init_irq(au1200_irqmap); + break; + } +} diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c index 117f99f7064..2580e77624d 100644 --- a/arch/mips/alchemy/common/platform.c +++ b/arch/mips/alchemy/common/platform.c @@ -19,39 +19,40 @@ #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1xxx_dbdma.h> #include <asm/mach-au1x00/au1100_mmc.h> - -#define PORT(_base, _irq) \ - { \ - .iobase = _base, \ - .membase = (void __iomem *)_base,\ - .mapbase = CPHYSADDR(_base), \ - .irq = _irq, \ - .regshift = 2, \ - .iotype = UPIO_AU, \ - .flags = UPF_SKIP_TEST \ +#include <asm/mach-au1x00/au1xxx_eth.h> + +#define PORT(_base, _irq) \ + { \ + .mapbase = _base, \ + .irq = _irq, \ + .regshift = 2, \ + .iotype = UPIO_AU, \ + .flags = UPF_SKIP_TEST | UPF_IOREMAP | \ + UPF_FIXED_TYPE, \ + .type = PORT_16550A, \ } static struct plat_serial8250_port au1x00_uart_data[] = { #if defined(CONFIG_SERIAL_8250_AU1X00) #if defined(CONFIG_SOC_AU1000) - PORT(UART0_ADDR, AU1000_UART0_INT), - PORT(UART1_ADDR, AU1000_UART1_INT), - PORT(UART2_ADDR, AU1000_UART2_INT), - PORT(UART3_ADDR, AU1000_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1000_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1000_UART1_INT), + PORT(UART2_PHYS_ADDR, AU1000_UART2_INT), + PORT(UART3_PHYS_ADDR, AU1000_UART3_INT), #elif defined(CONFIG_SOC_AU1500) - PORT(UART0_ADDR, AU1500_UART0_INT), - PORT(UART3_ADDR, AU1500_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1500_UART0_INT), + PORT(UART3_PHYS_ADDR, AU1500_UART3_INT), #elif defined(CONFIG_SOC_AU1100) - PORT(UART0_ADDR, AU1100_UART0_INT), - PORT(UART1_ADDR, AU1100_UART1_INT), - PORT(UART3_ADDR, AU1100_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1100_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1100_UART1_INT), + PORT(UART3_PHYS_ADDR, AU1100_UART3_INT), #elif defined(CONFIG_SOC_AU1550) - PORT(UART0_ADDR, AU1550_UART0_INT), - PORT(UART1_ADDR, AU1550_UART1_INT), - PORT(UART3_ADDR, AU1550_UART3_INT), + PORT(UART0_PHYS_ADDR, AU1550_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1550_UART1_INT), + PORT(UART3_PHYS_ADDR, AU1550_UART3_INT), #elif defined(CONFIG_SOC_AU1200) - PORT(UART0_ADDR, AU1200_UART0_INT), - PORT(UART1_ADDR, AU1200_UART1_INT), + PORT(UART0_PHYS_ADDR, AU1200_UART0_INT), + PORT(UART1_PHYS_ADDR, AU1200_UART1_INT), #endif #endif /* CONFIG_SERIAL_8250_AU1X00 */ { }, @@ -73,8 +74,8 @@ static struct resource au1xxx_usb_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, + .start = FOR_PLATFORM_C_USB_HOST_INT, + .end = FOR_PLATFORM_C_USB_HOST_INT, .flags = IORESOURCE_IRQ, }, }; @@ -132,8 +133,8 @@ static struct resource au1xxx_usb_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AU1000_USB_HOST_INT, - .end = AU1000_USB_HOST_INT, + .start = AU1200_USB_INT, + .end = AU1200_USB_INT, .flags = IORESOURCE_IRQ, }, }; @@ -308,11 +309,6 @@ static struct platform_device au1200_mmc1_device = { #endif /* #ifndef CONFIG_MIPS_DB1200 */ #endif /* #ifdef CONFIG_SOC_AU1200 */ -static struct platform_device au1x00_pcmcia_device = { - .name = "au1x00-pcmcia", - .id = 0, -}; - /* All Alchemy demoboards with I2C have this #define in their headers */ #ifdef SMBUS_PSC_BASE static struct resource pbdb_smbus_resources[] = { @@ -331,10 +327,92 @@ static struct platform_device pbdb_smbus_device = { }; #endif +/* Macro to help defining the Ethernet MAC resources */ +#define MAC_RES(_base, _enable, _irq) \ + { \ + .start = CPHYSADDR(_base), \ + .end = CPHYSADDR(_base + 0xffff), \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = CPHYSADDR(_enable), \ + .end = CPHYSADDR(_enable + 0x3), \ + .flags = IORESOURCE_MEM, \ + }, \ + { \ + .start = _irq, \ + .end = _irq, \ + .flags = IORESOURCE_IRQ \ + } + +static struct resource au1xxx_eth0_resources[] = { +#if defined(CONFIG_SOC_AU1000) + MAC_RES(AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1100) + MAC_RES(AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1550) + MAC_RES(AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT), +#elif defined(CONFIG_SOC_AU1500) + MAC_RES(AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT), +#endif +}; + + +static struct au1000_eth_platform_data au1xxx_eth0_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth0_device = { + .name = "au1000-eth", + .id = 0, + .num_resources = ARRAY_SIZE(au1xxx_eth0_resources), + .resource = au1xxx_eth0_resources, + .dev.platform_data = &au1xxx_eth0_platform_data, +}; + +#ifndef CONFIG_SOC_AU1100 +static struct resource au1xxx_eth1_resources[] = { +#if defined(CONFIG_SOC_AU1000) + MAC_RES(AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT), +#elif defined(CONFIG_SOC_AU1550) + MAC_RES(AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT), +#elif defined(CONFIG_SOC_AU1500) + MAC_RES(AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT), +#endif +}; + +static struct au1000_eth_platform_data au1xxx_eth1_platform_data = { + .phy1_search_mac0 = 1, +}; + +static struct platform_device au1xxx_eth1_device = { + .name = "au1000-eth", + .id = 1, + .num_resources = ARRAY_SIZE(au1xxx_eth1_resources), + .resource = au1xxx_eth1_resources, + .dev.platform_data = &au1xxx_eth1_platform_data, +}; +#endif + +void __init au1xxx_override_eth_cfg(unsigned int port, + struct au1000_eth_platform_data *eth_data) +{ + if (!eth_data || port > 1) + return; + + if (port == 0) + memcpy(&au1xxx_eth0_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +#ifndef CONFIG_SOC_AU1100 + else + memcpy(&au1xxx_eth1_platform_data, eth_data, + sizeof(struct au1000_eth_platform_data)); +#endif +} + static struct platform_device *au1xxx_platform_devices[] __initdata = { &au1xx0_uart_device, &au1xxx_usb_ohci_device, - &au1x00_pcmcia_device, #ifdef CONFIG_FB_AU1100 &au1100_lcd_device, #endif @@ -351,6 +429,7 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = { #ifdef SMBUS_PSC_BASE &pbdb_smbus_device, #endif + &au1xxx_eth0_device, }; static int __init au1xxx_platform_init(void) @@ -362,6 +441,12 @@ static int __init au1xxx_platform_init(void) for (i = 0; au1x00_uart_data[i].flags; i++) au1x00_uart_data[i].uartclk = uartclk; +#ifndef CONFIG_SOC_AU1100 + /* Register second MAC if enabled in pinfunc */ + if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2)) + platform_device_register(&au1xxx_eth1_device); +#endif + return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices)); } diff --git a/arch/mips/alchemy/common/prom.c b/arch/mips/alchemy/common/prom.c index 18b310b475c..c29511b11d4 100644 --- a/arch/mips/alchemy/common/prom.c +++ b/arch/mips/alchemy/common/prom.c @@ -43,29 +43,15 @@ int prom_argc; char **prom_argv; char **prom_envp; -char * __init_or_module prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - void prom_init_cmdline(void) { - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ + int i; - cp = &(arcs_cmdline[0]); - while (actr < prom_argc) { - strcpy(cp, prom_argv[actr]); - cp += strlen(prom_argv[actr]); - *cp++ = ' '; - actr++; + for (i = 1; i < prom_argc; i++) { + strlcat(arcs_cmdline, prom_argv[i], COMMAND_LINE_SIZE); + if (i < (prom_argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); } - if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ - --cp; - if (prom_argc > 1) - *cp = '\0'; } char *prom_getenv(char *envname) @@ -121,14 +107,12 @@ static inline void str2eaddr(unsigned char *ea, unsigned char *str) int prom_get_ethernet_addr(char *ethernet_addr) { char *ethaddr_str; - char *argptr; /* Check the environment variables first */ ethaddr_str = prom_getenv("ethaddr"); if (!ethaddr_str) { /* Check command line */ - argptr = prom_getcmdline(); - ethaddr_str = strstr(argptr, "ethaddr="); + ethaddr_str = strstr(arcs_cmdline, "ethaddr="); if (!ethaddr_str) return -1; diff --git a/arch/mips/alchemy/common/puts.c b/arch/mips/alchemy/common/puts.c deleted file mode 100644 index 55bbe24d45b..00000000000 --- a/arch/mips/alchemy/common/puts.c +++ /dev/null @@ -1,68 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Low level UART routines to directly access Alchemy UART. - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <asm/mach-au1x00/au1000.h> - -#define SERIAL_BASE UART_BASE -#define SER_CMD 0x7 -#define SER_DATA 0x1 -#define TX_BUSY 0x20 - -#define TIMEOUT 0xffffff -#define SLOW_DOWN - -static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE; - -#ifdef SLOW_DOWN -static inline void slow_down(void) -{ - int k; - - for (k = 0; k < 10000; k++); -} -#else -#define slow_down() -#endif - -void -prom_putchar(const unsigned char c) -{ - unsigned char ch; - int i = 0; - - do { - ch = com1[SER_CMD]; - slow_down(); - i++; - if (i > TIMEOUT) - break; - } while (0 == (ch & TX_BUSY)); - - com1[SER_DATA] = c; -} diff --git a/arch/mips/alchemy/common/reset.c b/arch/mips/alchemy/common/reset.c deleted file mode 100644 index 4791011e8f9..00000000000 --- a/arch/mips/alchemy/common/reset.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * - * BRIEF MODULE DESCRIPTION - * Au1xx0 reset routines. - * - * Copyright 2001, 2006, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/gpio.h> - -#include <asm/cacheflush.h> -#include <asm/mach-au1x00/au1000.h> - -void au1000_restart(char *command) -{ - /* Set all integrated peripherals to disabled states */ - extern void board_reset(void); - u32 prid = read_c0_prid(); - - printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n"); - - switch (prid & 0xFF000000) { - case 0x00000000: /* Au1000 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb0520004); /* macen1 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1300100); /* uart2_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x01000000: /* Au1500 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x02000000: /* Au1100 */ - au_writel(0x02, 0xb0000010); /* ac97_enable */ - au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */ - asm("sync"); - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb0300040); /* ir_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb0520000); /* macen0 */ - au_writel(0x00, 0xb1000008); /* i2s_enable */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x02, 0xb1600100); /* ssi0_enable */ - au_writel(0x02, 0xb1680100); /* ssi1_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - case 0x03000000: /* Au1550 */ - au_writel(0x00, 0xb1a00004); /* psc 0 */ - au_writel(0x00, 0xb1b00004); /* psc 1 */ - au_writel(0x00, 0xb0a00004); /* psc 2 */ - au_writel(0x00, 0xb0b00004); /* psc 3 */ - au_writel(0x00, 0xb017fffc); /* usbh_enable */ - au_writel(0x00, 0xb0200058); /* usbd_enable */ - au_writel(0x00, 0xb4004104); /* mac dma */ - au_writel(0x00, 0xb4004114); /* mac dma */ - au_writel(0x00, 0xb4004124); /* mac dma */ - au_writel(0x00, 0xb4004134); /* mac dma */ - au_writel(0x00, 0xb1520000); /* macen0 */ - au_writel(0x00, 0xb1520004); /* macen1 */ - au_writel(0x00, 0xb1100100); /* uart0_enable */ - au_writel(0x00, 0xb1200100); /* uart1_enable */ - au_writel(0x00, 0xb1400100); /* uart3_enable */ - au_writel(0x00, 0xb1900020); /* sys_freqctrl0 */ - au_writel(0x00, 0xb1900024); /* sys_freqctrl1 */ - au_writel(0x00, 0xb1900028); /* sys_clksrc */ - au_writel(0x10, 0xb1900060); /* sys_cpupll */ - au_writel(0x00, 0xb1900064); /* sys_auxpll */ - au_writel(0x00, 0xb1900100); /* sys_pininputen */ - break; - } - - set_c0_status(ST0_BEV | ST0_ERL); - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - flush_cache_all(); - write_c0_wired(0); - - /* Give board a chance to do a hardware reset */ - board_reset(); - - /* Jump to the beggining in case board_reset() is empty */ - __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); -} - -void au1000_halt(void) -{ -#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) - /* Power off system */ - printk(KERN_NOTICE "\n** Powering off...\n"); - au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C); - au_sync(); - while (1); /* should not get here */ -#else - printk(KERN_NOTICE "\n** You can safely turn off the power\n"); -#ifdef CONFIG_MIPS_MIRAGE - gpio_direction_output(210, 1); -#endif -#ifdef CONFIG_MIPS_DB1200 - au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C); -#endif -#ifdef CONFIG_PM - au_sleep(); - - /* Should not get here */ - printk(KERN_ERR "Unable to put CPU in sleep mode\n"); - while (1); -#else - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -#endif -#endif /* defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550) */ -} - -void au1000_power_off(void) -{ - au1000_halt(); -} diff --git a/arch/mips/alchemy/common/setup.c b/arch/mips/alchemy/common/setup.c index 6184baa5678..561e5da2658 100644 --- a/arch/mips/alchemy/common/setup.c +++ b/arch/mips/alchemy/common/setup.c @@ -29,18 +29,13 @@ #include <linux/ioport.h> #include <linux/jiffies.h> #include <linux/module.h> -#include <linux/pm.h> #include <asm/mipsregs.h> -#include <asm/reboot.h> #include <asm/time.h> #include <au1000.h> extern void __init board_setup(void); -extern void au1000_restart(char *); -extern void au1000_halt(void); -extern void au1000_power_off(void); extern void set_cpuspec(void); void __init plat_mem_setup(void) @@ -57,10 +52,6 @@ void __init plat_mem_setup(void) /* this is faster than wasting cycles trying to approximate it */ preset_lpj = (est_freq >> 1) / HZ; - _machine_restart = au1000_restart; - _machine_halt = au1000_halt; - pm_power_off = au1000_power_off; - board_setup(); /* board specific setup */ if (au1xxx_cpu_needs_config_od()) @@ -78,37 +69,20 @@ void __init plat_mem_setup(void) iomem_resource.end = IOMEM_RESOURCE_END; } -#if defined(CONFIG_64BIT_PHYS_ADDR) +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI) /* This routine should be valid for all Au1x based boards */ phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) { + u32 start = (u32)Au1500_PCI_MEM_START; + u32 end = (u32)Au1500_PCI_MEM_END; + /* Don't fixup 36-bit addresses */ if ((phys_addr >> 32) != 0) return phys_addr; -#ifdef CONFIG_PCI - { - u32 start = (u32)Au1500_PCI_MEM_START; - u32 end = (u32)Au1500_PCI_MEM_END; - - /* Check for PCI memory window */ - if (phys_addr >= start && (phys_addr + size - 1) <= end) - return (phys_t) - ((phys_addr - start) + Au1500_PCI_MEM_START); - } -#endif - - /* - * All Au1xx0 SOCs have a PCMCIA controller. - * We setup our 32-bit pseudo addresses to be equal to the - * 36-bit addr >> 4, to make it easier to check the address - * and fix it. - * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000. - * The pseudo address we use is 0xF400 0000. Any address over - * 0xF400 0000 is a PCMCIA pseudo address. - */ - if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) - return (phys_t)(phys_addr << 4); + /* Check for PCI memory window */ + if (phys_addr >= start && (phys_addr + size - 1) <= end) + return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START); /* default nop */ return phys_addr; diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 379a664809b..2aecb2fdf98 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2008 Manuel Lauss <mano@roarinelk.homelinux.net> + * Copyright (C) 2008-2009 Manuel Lauss <manuel.lauss@gmail.com> * * Previous incarnations were: * Copyright (C) 2001, 2006, 2008 MontaVista Software, <source@mvista.com> @@ -85,7 +85,6 @@ static struct clock_event_device au1x_rtcmatch2_clockdev = { .name = "rtcmatch2", .features = CLOCK_EVT_FEAT_ONESHOT, .rating = 100, - .irq = AU1000_RTC_MATCH2_INT, .set_next_event = au1x_rtcmatch2_set_next_event, .set_mode = au1x_rtcmatch2_set_mode, .cpumask = cpu_all_mask, @@ -98,11 +97,13 @@ static struct irqaction au1x_rtcmatch2_irqaction = { .dev_id = &au1x_rtcmatch2_clockdev, }; -void __init plat_time_init(void) +static int __init alchemy_time_init(unsigned int m2int) { struct clock_event_device *cd = &au1x_rtcmatch2_clockdev; unsigned long t; + au1x_rtcmatch2_clockdev.irq = m2int; + /* Check if firmware (YAMON, ...) has enabled 32kHz and clock * has been detected. If so install the rtcmatch2 clocksource, * otherwise don't bother. Note that both bits being set is by @@ -148,13 +149,18 @@ void __init plat_time_init(void) cd->max_delta_ns = clockevent_delta2ns(0xffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(8, cd); /* ~0.25ms */ clockevents_register_device(cd); - setup_irq(AU1000_RTC_MATCH2_INT, &au1x_rtcmatch2_irqaction); + setup_irq(m2int, &au1x_rtcmatch2_irqaction); printk(KERN_INFO "Alchemy clocksource installed\n"); - return; + return 0; cntr_err: + return -1; +} + +static void __init alchemy_setup_c0timer(void) +{ /* * MIPS kernel assigns 'au1k_wait' to 'cpu_wait' before this * function is called. Because the Alchemy counters are unusable @@ -166,3 +172,22 @@ cntr_err: r4k_clockevent_init(); init_r4k_clocksource(); } + +static int alchemy_m2inttab[] __initdata = { + AU1000_RTC_MATCH2_INT, + AU1500_RTC_MATCH2_INT, + AU1100_RTC_MATCH2_INT, + AU1550_RTC_MATCH2_INT, + AU1200_RTC_MATCH2_INT, +}; + +void __init plat_time_init(void) +{ + int t; + + t = alchemy_get_cputype(); + if (t == ALCHEMY_CPU_UNKNOWN) + alchemy_setup_c0timer(); + else if (alchemy_time_init(alchemy_m2inttab[t])) + alchemy_setup_c0timer(); +} diff --git a/arch/mips/alchemy/devboards/Makefile b/arch/mips/alchemy/devboards/Makefile index 730f9f2b30e..ecbd37f9ee8 100644 --- a/arch/mips/alchemy/devboards/Makefile +++ b/arch/mips/alchemy/devboards/Makefile @@ -2,7 +2,7 @@ # Alchemy Develboards # -obj-y += prom.o +obj-y += prom.o bcsr.o platform.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_MIPS_PB1000) += pb1000/ obj-$(CONFIG_MIPS_PB1100) += pb1100/ @@ -11,8 +11,10 @@ obj-$(CONFIG_MIPS_PB1500) += pb1500/ obj-$(CONFIG_MIPS_PB1550) += pb1550/ obj-$(CONFIG_MIPS_DB1000) += db1x00/ obj-$(CONFIG_MIPS_DB1100) += db1x00/ -obj-$(CONFIG_MIPS_DB1200) += pb1200/ +obj-$(CONFIG_MIPS_DB1200) += db1200/ obj-$(CONFIG_MIPS_DB1500) += db1x00/ obj-$(CONFIG_MIPS_DB1550) += db1x00/ obj-$(CONFIG_MIPS_BOSPORUS) += db1x00/ obj-$(CONFIG_MIPS_MIRAGE) += db1x00/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/devboards/bcsr.c b/arch/mips/alchemy/devboards/bcsr.c new file mode 100644 index 00000000000..3bc4fd2155d --- /dev/null +++ b/arch/mips/alchemy/devboards/bcsr.c @@ -0,0 +1,148 @@ +/* + * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction. + * + * All Alchemy development boards (except, of course, the weird PB1000) + * have a few registers in a CPLD with standardised layout; they mostly + * only differ in base address. + * All registers are 16bits wide with 32bit spacing. + */ + +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <asm/addrspace.h> +#include <asm/io.h> +#include <asm/mach-db1x00/bcsr.h> + +static struct bcsr_reg { + void __iomem *raddr; + spinlock_t lock; +} bcsr_regs[BCSR_CNT]; + +static void __iomem *bcsr_virt; /* KSEG1 addr of BCSR base */ +static int bcsr_csc_base; /* linux-irq of first cascaded irq */ + +void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys) +{ + int i; + + bcsr1_phys = KSEG1ADDR(CPHYSADDR(bcsr1_phys)); + bcsr2_phys = KSEG1ADDR(CPHYSADDR(bcsr2_phys)); + + bcsr_virt = (void __iomem *)bcsr1_phys; + + for (i = 0; i < BCSR_CNT; i++) { + if (i >= BCSR_HEXLEDS) + bcsr_regs[i].raddr = (void __iomem *)bcsr2_phys + + (0x04 * (i - BCSR_HEXLEDS)); + else + bcsr_regs[i].raddr = (void __iomem *)bcsr1_phys + + (0x04 * i); + + spin_lock_init(&bcsr_regs[i].lock); + } +} + +unsigned short bcsr_read(enum bcsr_id reg) +{ + unsigned short r; + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + r = __raw_readw(bcsr_regs[reg].raddr); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); + return r; +} +EXPORT_SYMBOL_GPL(bcsr_read); + +void bcsr_write(enum bcsr_id reg, unsigned short val) +{ + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + __raw_writew(val, bcsr_regs[reg].raddr); + wmb(); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); +} +EXPORT_SYMBOL_GPL(bcsr_write); + +void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set) +{ + unsigned short r; + unsigned long flags; + + spin_lock_irqsave(&bcsr_regs[reg].lock, flags); + r = __raw_readw(bcsr_regs[reg].raddr); + r &= ~clr; + r |= set; + __raw_writew(r, bcsr_regs[reg].raddr); + wmb(); + spin_unlock_irqrestore(&bcsr_regs[reg].lock, flags); +} +EXPORT_SYMBOL_GPL(bcsr_mod); + +/* + * DB1200/PB1200 CPLD IRQ muxer + */ +static void bcsr_csc_handler(unsigned int irq, struct irq_desc *d) +{ + unsigned short bisr = __raw_readw(bcsr_virt + BCSR_REG_INTSTAT); + + for ( ; bisr; bisr &= bisr - 1) + generic_handle_irq(bcsr_csc_base + __ffs(bisr)); +} + +/* NOTE: both the enable and mask bits must be cleared, otherwise the + * CPLD generates tons of spurious interrupts (at least on my DB1200). + * -- mlau + */ +static void bcsr_irq_mask(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); + wmb(); +} + +static void bcsr_irq_maskack(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(v, bcsr_virt + BCSR_REG_INTSTAT); /* ack */ + wmb(); +} + +static void bcsr_irq_unmask(unsigned int irq_nr) +{ + unsigned short v = 1 << (irq_nr - bcsr_csc_base); + __raw_writew(v, bcsr_virt + BCSR_REG_INTSET); + __raw_writew(v, bcsr_virt + BCSR_REG_MASKSET); + wmb(); +} + +static struct irq_chip bcsr_irq_type = { + .name = "CPLD", + .mask = bcsr_irq_mask, + .mask_ack = bcsr_irq_maskack, + .unmask = bcsr_irq_unmask, +}; + +void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq) +{ + unsigned int irq; + + /* mask & disable & ack all */ + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_MASKCLR); + __raw_writew(0xffff, bcsr_virt + BCSR_REG_INTSTAT); + wmb(); + + bcsr_csc_base = csc_start; + + for (irq = csc_start; irq <= csc_end; irq++) + set_irq_chip_and_handler_name(irq, &bcsr_irq_type, + handle_level_irq, "level"); + + set_irq_chained_handler(hook_irq, bcsr_csc_handler); +} diff --git a/arch/mips/alchemy/devboards/db1200/Makefile b/arch/mips/alchemy/devboards/db1200/Makefile new file mode 100644 index 00000000000..17840a5e273 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/Makefile @@ -0,0 +1 @@ +obj-y += setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c new file mode 100644 index 00000000000..3cb95a98ab3 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -0,0 +1,561 @@ +/* + * DBAu1200 board platform device registration + * + * Copyright (C) 2008-2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/dma-mapping.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/leds.h> +#include <linux/mmc/host.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/smc91x.h> + +#include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-au1x00/au1xxx_dbdma.h> +#include <asm/mach-au1x00/au1550_spi.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-db1x00/db1200.h> + +#include "../platform.h" + +static struct mtd_partition db1200_spiflash_parts[] = { + { + .name = "DB1200 SPI flash", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct flash_platform_data db1200_spiflash_data = { + .name = "s25fl001", + .parts = db1200_spiflash_parts, + .nr_parts = ARRAY_SIZE(db1200_spiflash_parts), + .type = "m25p10", +}; + +static struct spi_board_info db1200_spi_devs[] __initdata = { + { + /* TI TMP121AIDBVR temp sensor */ + .modalias = "tmp121", + .max_speed_hz = 2000000, + .bus_num = 0, + .chip_select = 0, + .mode = 0, + }, + { + /* Spansion S25FL001D0FMA SPI flash */ + .modalias = "m25p80", + .max_speed_hz = 50000000, + .bus_num = 0, + .chip_select = 1, + .mode = 0, + .platform_data = &db1200_spiflash_data, + }, +}; + +static struct i2c_board_info db1200_i2c_devs[] __initdata = { + { + /* AT24C04-10 I2C eeprom */ + I2C_BOARD_INFO("24c04", 0x52), + }, + { + /* Philips NE1619 temp/voltage sensor (adm1025 drv) */ + I2C_BOARD_INFO("ne1619", 0x2d), + }, + { + /* I2S audio codec WM8731 */ + I2C_BOARD_INFO("wm8731", 0x1b), + }, +}; + +/**********************************************************************/ + +static void au1200_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long ioaddr = (unsigned long)this->IO_ADDR_W; + + ioaddr &= 0xffffff00; + + if (ctrl & NAND_CLE) { + ioaddr += MEM_STNAND_CMD; + } else if (ctrl & NAND_ALE) { + ioaddr += MEM_STNAND_ADDR; + } else { + /* assume we want to r/w real data by default */ + ioaddr += MEM_STNAND_DATA; + } + this->IO_ADDR_R = this->IO_ADDR_W = (void __iomem *)ioaddr; + if (cmd != NAND_CMD_NONE) { + __raw_writeb(cmd, this->IO_ADDR_W); + wmb(); + } +} + +static int au1200_nand_device_ready(struct mtd_info *mtd) +{ + return __raw_readl((void __iomem *)MEM_STSTAT) & 1; +} + +static const char *db1200_part_probes[] = { "cmdlinepart", NULL }; + +static struct mtd_partition db1200_nand_parts[] = { + { + .name = "NAND FS 0", + .offset = 0, + .size = 8 * 1024 * 1024, + }, + { + .name = "NAND FS 1", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL + }, +}; + +struct platform_nand_data db1200_nand_platdata = { + .chip = { + .nr_chips = 1, + .chip_offset = 0, + .nr_partitions = ARRAY_SIZE(db1200_nand_parts), + .partitions = db1200_nand_parts, + .chip_delay = 20, + .part_probe_types = db1200_part_probes, + }, + .ctrl = { + .dev_ready = au1200_nand_device_ready, + .cmd_ctrl = au1200_nand_cmd_ctrl, + }, +}; + +static struct resource db1200_nand_res[] = { + [0] = { + .start = DB1200_NAND_PHYS_ADDR, + .end = DB1200_NAND_PHYS_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device db1200_nand_dev = { + .name = "gen_nand", + .num_resources = ARRAY_SIZE(db1200_nand_res), + .resource = db1200_nand_res, + .id = -1, + .dev = { + .platform_data = &db1200_nand_platdata, + } +}; + +/**********************************************************************/ + +static struct smc91x_platdata db1200_eth_data = { + .flags = SMC91X_NOWAIT | SMC91X_USE_16BIT, + .leda = RPC_LED_100_10, + .ledb = RPC_LED_TX_RX, +}; + +static struct resource db1200_eth_res[] = { + [0] = { + .start = DB1200_ETH_PHYS_ADDR, + .end = DB1200_ETH_PHYS_ADDR + 0xf, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_ETH_INT, + .end = DB1200_ETH_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device db1200_eth_dev = { + .dev = { + .platform_data = &db1200_eth_data, + }, + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(db1200_eth_res), + .resource = db1200_eth_res, +}; + +/**********************************************************************/ + +static struct resource db1200_ide_res[] = { + [0] = { + .start = DB1200_IDE_PHYS_ADDR, + .end = DB1200_IDE_PHYS_ADDR + DB1200_IDE_PHYS_LEN - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = DB1200_IDE_INT, + .end = DB1200_IDE_INT, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 ide_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_ide_dev = { + .name = "au1200-ide", + .id = 0, + .dev = { + .dma_mask = &ide_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + }, + .num_resources = ARRAY_SIZE(db1200_ide_res), + .resource = db1200_ide_res, +}; + +/**********************************************************************/ + +static struct platform_device db1200_rtc_dev = { + .name = "rtc-au1xxx", + .id = -1, +}; + +/**********************************************************************/ + +/* SD carddetects: they're supposed to be edge-triggered, but ack + * doesn't seem to work (CPLD Rev 2). Instead, the screaming one + * is disabled and its counterpart enabled. The 500ms timeout is + * because the carddetect isn't debounced in hardware. + */ +static irqreturn_t db1200_mmc_cd(int irq, void *ptr) +{ + void(*mmc_cd)(struct mmc_host *, unsigned long); + + if (irq == DB1200_SD0_INSERT_INT) { + disable_irq_nosync(DB1200_SD0_INSERT_INT); + enable_irq(DB1200_SD0_EJECT_INT); + } else { + disable_irq_nosync(DB1200_SD0_EJECT_INT); + enable_irq(DB1200_SD0_INSERT_INT); + } + + /* link against CONFIG_MMC=m */ + mmc_cd = symbol_get(mmc_detect_change); + if (mmc_cd) { + mmc_cd(ptr, msecs_to_jiffies(500)); + symbol_put(mmc_detect_change); + } + + return IRQ_HANDLED; +} + +static int db1200_mmc_cd_setup(void *mmc_host, int en) +{ + int ret; + + if (en) { + ret = request_irq(DB1200_SD0_INSERT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_insert", mmc_host); + if (ret) + goto out; + + ret = request_irq(DB1200_SD0_EJECT_INT, db1200_mmc_cd, + IRQF_DISABLED, "sd_eject", mmc_host); + if (ret) { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + goto out; + } + + if (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) + enable_irq(DB1200_SD0_EJECT_INT); + else + enable_irq(DB1200_SD0_INSERT_INT); + + } else { + free_irq(DB1200_SD0_INSERT_INT, mmc_host); + free_irq(DB1200_SD0_EJECT_INT, mmc_host); + } + ret = 0; +out: + return ret; +} + +static void db1200_mmc_set_power(void *mmc_host, int state) +{ + if (state) { + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); + msleep(400); /* stabilization time */ + } else + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); +} + +static int db1200_mmc_card_readonly(void *mmc_host) +{ + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; +} + +static int db1200_mmc_card_inserted(void *mmc_host) +{ + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; +} + +static void db1200_mmcled_set(struct led_classdev *led, + enum led_brightness brightness) +{ + if (brightness != LED_OFF) + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); + else + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); +} + +static struct led_classdev db1200_mmc_led = { + .brightness_set = db1200_mmcled_set, +}; + +/* needed by arch/mips/alchemy/common/platform.c */ +struct au1xmmc_platform_data au1xmmc_platdata[] = { + [0] = { + .cd_setup = db1200_mmc_cd_setup, + .set_power = db1200_mmc_set_power, + .card_inserted = db1200_mmc_card_inserted, + .card_readonly = db1200_mmc_card_readonly, + .led = &db1200_mmc_led, + }, +}; + +/**********************************************************************/ + +static struct resource au1200_psc0_res[] = { + [0] = { + .start = PSC0_PHYS_ADDR, + .end = PSC0_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC0_INT, + .end = AU1200_PSC0_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC0_TX, + .end = DSCR_CMD0_PSC0_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC0_RX, + .end = DSCR_CMD0_PSC0_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_i2c_dev = { + .name = "au1xpsc_smbus", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static void db1200_spi_cs_en(struct au1550_spi_info *spi, int cs, int pol) +{ + if (cs) + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_SPISEL); + else + bcsr_mod(BCSR_RESETS, BCSR_RESETS_SPISEL, 0); +} + +static struct au1550_spi_info db1200_spi_platdata = { + .mainclk_hz = 50000000, /* PSC0 clock */ + .num_chipselect = 2, + .activate_cs = db1200_spi_cs_en, +}; + +static u64 spi_dmamask = DMA_32BIT_MASK; + +static struct platform_device db1200_spi_dev = { + .dev = { + .dma_mask = &spi_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = &db1200_spi_platdata, + }, + .name = "au1550-spi", + .id = 0, /* bus number */ + .num_resources = ARRAY_SIZE(au1200_psc0_res), + .resource = au1200_psc0_res, +}; + +static struct resource au1200_psc1_res[] = { + [0] = { + .start = PSC1_PHYS_ADDR, + .end = PSC1_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC1_INT, + .end = AU1200_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC1_TX, + .end = DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC1_RX, + .end = DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_audio_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1200_psc1_res), + .resource = au1200_psc1_res, +}; + +static struct platform_device *db1200_devs[] __initdata = { + NULL, /* PSC0, selected by S6.8 */ + &db1200_ide_dev, + &db1200_eth_dev, + &db1200_rtc_dev, + &db1200_nand_dev, + &db1200_audio_dev, +}; + +static int __init db1200_dev_init(void) +{ + unsigned long pfc; + unsigned short sw; + int swapped; + + i2c_register_board_info(0, db1200_i2c_devs, + ARRAY_SIZE(db1200_i2c_devs)); + spi_register_board_info(db1200_spi_devs, + ARRAY_SIZE(db1200_i2c_devs)); + + /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) + */ + + /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however + * this pin is claimed by PSC0 (unused though, but pinmux doesn't + * allow to free it without crippling the SPI interface). + * As a result, in SPI mode, OTG simply won't work (PSC0 uses + * it as an input pin which is pulled high on the boards). + */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC) & ~SYS_PINFUNC_P0A; + + /* switch off OTG VBUS supply */ + gpio_request(215, "otg-vbus"); + gpio_direction_output(215, 1); + + printk(KERN_INFO "DB1200 device configuration:\n"); + + sw = bcsr_read(BCSR_SWITCHES); + if (sw & BCSR_SWITCHES_DIP_8) { + db1200_devs[0] = &db1200_i2c_dev; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); + + pfc |= (2 << 17); /* GPIO2 block owns GPIO215 */ + + printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n"); + printk(KERN_INFO " OTG port VBUS supply available!\n"); + } else { + db1200_devs[0] = &db1200_spi_dev; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC0MUX); + + pfc |= (1 << 17); /* PSC0 owns GPIO215 */ + + printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n"); + printk(KERN_INFO " OTG port VBUS supply disabled\n"); + } + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! + * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S + */ + sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; + if (sw == BCSR_SWITCHES_DIP_8) { + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); + db1200_audio_dev.name = "au1xpsc_i2s"; + printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); + } else { + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); + db1200_audio_dev.name = "au1xpsc_ac97"; + printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); + } + + /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1200_PC0_INT, + DB1200_PC0_INSERT_INT, + /*DB1200_PC0_STSCHG_INT*/0, + DB1200_PC0_EJECT_INT, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x004000000, + PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x004000000, + PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1200_PC1_INT, + DB1200_PC1_INSERT_INT, + /*DB1200_PC1_STSCHG_INT*/0, + DB1200_PC1_EJECT_INT, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(64 << 20, 2, swapped); + + return platform_add_devices(db1200_devs, ARRAY_SIZE(db1200_devs)); +} +device_initcall(db1200_dev_init); + +/* au1200fb calls these: STERBT EINEN TRAGISCHEN TOD!!! */ +int board_au1200fb_panel(void) +{ + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; +} + +int board_au1200fb_panel_init(void) +{ + /* Apply power */ + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); + return 0; +} + +int board_au1200fb_panel_shutdown(void) +{ + /* Remove power */ + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); + return 0; +} diff --git a/arch/mips/alchemy/devboards/db1200/setup.c b/arch/mips/alchemy/devboards/db1200/setup.c new file mode 100644 index 00000000000..379536e3abd --- /dev/null +++ b/arch/mips/alchemy/devboards/db1200/setup.c @@ -0,0 +1,118 @@ +/* + * Alchemy/AMD/RMI DB1200 board setup. + * + * Licensed under the terms outlined in the file COPYING in the root of + * this source archive. + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-db1x00/db1200.h> + +const char *get_system_type(void) +{ + return "Alchemy Db1200"; +} + +void __init board_setup(void) +{ + unsigned long freq0, clksrc, div, pfc; + unsigned short whoami; + + bcsr_init(DB1200_BCSR_PHYS_ADDR, + DB1200_BCSR_PHYS_ADDR + DB1200_BCSR_HEXLED_OFS); + + whoami = bcsr_read(BCSR_WHOAMI); + printk(KERN_INFO "Alchemy/AMD/RMI DB1200 Board, CPLD Rev %d" + " Board-ID %d Daughtercard ID %d\n", + (whoami >> 4) & 0xf, (whoami >> 8) & 0xf, whoami & 0xf); + + /* SMBus/SPI on PSC0, Audio on PSC1 */ + pfc = __raw_readl((void __iomem *)SYS_PINFUNC); + pfc &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B); + pfc &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B | SYS_PINFUNC_FS3); + pfc |= SYS_PINFUNC_P1C; /* SPI is configured later */ + __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); + wmb(); + + /* Clock configurations: PSC0: ~50MHz via Clkgen0, derived from + * CPU clock; all other clock generators off/unused. + */ + div = (get_au1x00_speed() + 25000000) / 50000000; + if (div & 1) + div++; + div = ((div >> 1) - 1) & 0xff; + + freq0 = div << SYS_FC_FRDIV0_BIT; + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + freq0 |= SYS_FC_FE0; /* enable F0 */ + __raw_writel(freq0, (void __iomem *)SYS_FREQCTRL0); + wmb(); + + /* psc0_intclk comes 1:1 from F0 */ + clksrc = SYS_CS_MUX_FQ0 << SYS_CS_ME0_BIT; + __raw_writel(clksrc, (void __iomem *)SYS_CLKSRC); + wmb(); +} + +/* use the hexleds to count the number of times the cpu has entered + * wait, the dots to indicate whether the CPU is currently idle or + * active (dots off = sleeping, dots on = working) for cases where + * the number doesn't change for a long(er) period of time. + */ +static void db1200_wait(void) +{ + __asm__(" .set push \n" + " .set mips3 \n" + " .set noreorder \n" + " cache 0x14, 0(%0) \n" + " cache 0x14, 32(%0) \n" + " cache 0x14, 64(%0) \n" + /* dots off: we're about to call wait */ + " lui $26, 0xb980 \n" + " ori $27, $0, 3 \n" + " sb $27, 0x18($26) \n" + " sync \n" + " nop \n" + " wait \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + " nop \n" + /* dots on: there's work to do, increment cntr */ + " lui $26, 0xb980 \n" + " sb $0, 0x18($26) \n" + " lui $26, 0xb9c0 \n" + " lb $27, 0($26) \n" + " addiu $27, $27, 1 \n" + " sb $27, 0($26) \n" + " sync \n" + " .set pop \n" + : : "r" (db1200_wait)); +} + +static int __init db1200_arch_init(void) +{ + /* GPIO7 is low-level triggered CPLD cascade */ + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(DB1200_INT_BEGIN, DB1200_INT_END, AU1200_GPIO7_INT); + + /* do not autoenable these: CPLD has broken edge int handling, + * and the CD handler setup requires manual enabling to work + * around that. + */ + irq_to_desc(DB1200_SD0_INSERT_INT)->status |= IRQ_NOAUTOEN; + irq_to_desc(DB1200_SD0_EJECT_INT)->status |= IRQ_NOAUTOEN; + + if (cpu_wait) + cpu_wait = db1200_wait; + + return 0; +} +arch_initcall(db1200_arch_init); diff --git a/arch/mips/alchemy/devboards/db1x00/Makefile b/arch/mips/alchemy/devboards/db1x00/Makefile index 432241ab867..613c0c0c8be 100644 --- a/arch/mips/alchemy/devboards/db1x00/Makefile +++ b/arch/mips/alchemy/devboards/db1x00/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor DBAu1xx0 boards. # -obj-y := board_setup.o irqmap.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/db1x00/board_setup.c b/arch/mips/alchemy/devboards/db1x00/board_setup.c index de30d8ea717..50c9bef99da 100644 --- a/arch/mips/alchemy/devboards/db1x00/board_setup.c +++ b/arch/mips/alchemy/devboards/db1x00/board_setup.c @@ -29,59 +29,139 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> #include <asm/mach-au1x00/au1000.h> +#include <asm/mach-au1x00/au1xxx_eth.h> #include <asm/mach-db1x00/db1x00.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/reboot.h> #include <prom.h> +#ifdef CONFIG_MIPS_DB1500 +char irq_tab_alchemy[][5] __initdata = { + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT371 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ +}; + +#endif -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; + +#ifdef CONFIG_MIPS_DB1550 +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1550_PCI_INTC, 0xff, 0xff, 0xff }, /* IDSEL 11 - on-board HPT371 */ + [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ +}; +#endif + + +#ifdef CONFIG_MIPS_BOSPORUS +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 11 - miniPCI */ + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - SN1741 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ +}; + +/* + * Micrel/Kendin 5 port switch attached to MAC0, + * MAC0 is associated with PHY address 5 (== WAN port) + * MAC1 is not associated with any PHY, since it's connected directly + * to the switch. + * no interrupts are used + */ +static struct au1000_eth_platform_data eth0_pdata = { + .phy_static_config = 1, + .phy_addr = 5, +}; + +static void bosporus_power_off(void) +{ + printk(KERN_INFO "It's now safe to turn off power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips0"); +} const char *get_system_type(void) { -#ifdef CONFIG_MIPS_BOSPORUS return "Alchemy Bosporus Gateway Reference"; -#else - return "Alchemy Db1x00"; +} #endif + + +#ifdef CONFIG_MIPS_MIRAGE +char irq_tab_alchemy[][5] __initdata = { + [11] = { -1, AU1500_PCI_INTD, 0xff, 0xff, 0xff }, /* IDSEL 11 - SMI VGX */ + [12] = { -1, 0xff, 0xff, AU1500_PCI_INTC, 0xff }, /* IDSEL 12 - PNX1300 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 13 - miniPCI */ +}; + +static void mirage_power_off(void) +{ + alchemy_gpio_direction_output(210, 1); +} + +const char *get_system_type(void) +{ + return "Alchemy Mirage"; +} +#endif + + +#if defined(CONFIG_MIPS_BOSPORUS) || defined(CONFIG_MIPS_MIRAGE) +static void mips_softreset(void) +{ + asm volatile ("jr\t%0" : : "r"(0xbfc00000)); } -void board_reset(void) +#else + +const char *get_system_type(void) { - /* Hit BCSR.SW_RESET[RESET] */ - bcsr->swreset = 0x0000; + return "Alchemy Db1x00"; } +#endif + void __init board_setup(void) { - u32 pin_func = 0; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } + unsigned long bcsr1, bcsr2; + u32 pin_func; + + bcsr1 = DB1000_BCSR_PHYS_ADDR; + bcsr2 = DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS; + + pin_func = 0; + +#ifdef CONFIG_MIPS_DB1000 + printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1500 + printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); #endif +#ifdef CONFIG_MIPS_DB1100 + printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); +#endif +#ifdef CONFIG_MIPS_BOSPORUS + au1xxx_override_eth_cfg(0, ð0_pdata); -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } + printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); #endif +#ifdef CONFIG_MIPS_MIRAGE + printk(KERN_INFO "AMD Alchemy Mirage Board\n"); +#endif +#ifdef CONFIG_MIPS_DB1550 + printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); + bcsr1 = DB1550_BCSR_PHYS_ADDR; + bcsr2 = DB1550_BCSR_PHYS_ADDR + DB1550_BCSR_HEXLED_OFS; #endif + /* initialize board register space */ + bcsr_init(bcsr1, bcsr2); + /* Not valid for Au1550 */ #if defined(CONFIG_IRDA) && \ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100)) @@ -89,11 +169,10 @@ void __init board_setup(void) pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF; au_writel(pin_func, SYS_PINFUNC); /* Power off until the driver is in use */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF; - au_sync(); + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_OFF); #endif - bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */ + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ /* Enable GPIO[31:0] inputs */ alchemy_gpio1_input_enable(); @@ -120,26 +199,53 @@ void __init board_setup(void) * be part of the audio driver. */ alchemy_gpio_direction_output(209, 1); -#endif - - au_sync(); -#ifdef CONFIG_MIPS_DB1000 - printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1500 - printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1100 - printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n"); + pm_power_off = mirage_power_off; + _machine_halt = mirage_power_off; + _machine_restart = (void(*)(char *))mips_softreset; #endif + #ifdef CONFIG_MIPS_BOSPORUS - printk(KERN_INFO "AMD Alchemy Bosporus Board\n"); + pm_power_off = bosporus_power_off; + _machine_halt = bosporus_power_off; + _machine_restart = (void(*)(char *))mips_softreset; #endif -#ifdef CONFIG_MIPS_MIRAGE - printk(KERN_INFO "AMD Alchemy Mirage Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1550 - printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n"); + au_sync(); +} + +static int __init db1x00_init_irq(void) +{ +#if defined(CONFIG_MIPS_MIRAGE) + set_irq_type(AU1500_GPIO7_INT, IRQF_TRIGGER_RISING); /* TS pendown */ +#elif defined(CONFIG_MIPS_DB1550) + set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1550_GPIO3_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1550_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1550_GPIO21_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1550_GPIO22_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1500) + set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1100) + set_irq_type(AU1100_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1100_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1100_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1100_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1100_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1100_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ +#elif defined(CONFIG_MIPS_DB1000) + set_irq_type(AU1000_GPIO0_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1000_GPIO3_INT, IRQF_TRIGGER_LOW); /* CD1# */ + set_irq_type(AU1000_GPIO2_INT, IRQF_TRIGGER_LOW); /* CARD0# */ + set_irq_type(AU1000_GPIO5_INT, IRQF_TRIGGER_LOW); /* CARD1# */ + set_irq_type(AU1000_GPIO1_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1000_GPIO4_INT, IRQF_TRIGGER_LOW); /* STSCHG1# */ #endif + return 0; } +arch_initcall(db1x00_init_irq); diff --git a/arch/mips/alchemy/devboards/db1x00/irqmap.c b/arch/mips/alchemy/devboards/db1x00/irqmap.c deleted file mode 100644 index 0b09025087c..00000000000 --- a/arch/mips/alchemy/devboards/db1x00/irqmap.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_MIPS_DB1500 -char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */ - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; -#endif - -#ifdef CONFIG_MIPS_MIRAGE -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */ - [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */ - [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */ -}; -#endif - -#ifdef CONFIG_MIPS_DB1550 -char irq_tab_alchemy[][5] __initdata = { - [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */ - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; -#endif - - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - -#ifndef CONFIG_MIPS_MIRAGE -#ifdef CONFIG_MIPS_DB1550 - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */ -#else - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 Fully_Interted# */ - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 STSCHG# */ - { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 0 IRQ# */ - - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 Fully_Interted# */ - { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 STSCHG# */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card 1 IRQ# */ -#endif -#else - { AU1000_GPIO_7, IRQF_TRIGGER_RISING, 0 }, /* touchscreen pen down */ -#endif - -}; - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/devboards/db1x00/platform.c b/arch/mips/alchemy/devboards/db1x00/platform.c new file mode 100644 index 00000000000..978d5ab3d67 --- /dev/null +++ b/arch/mips/alchemy/devboards/db1x00/platform.c @@ -0,0 +1,118 @@ +/* + * DBAu1xxx board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-db1x00/bcsr.h> +#include "../platform.h" + +/* DB1xxx PCMCIA interrupt sources: + * CD0/1 GPIO0/3 + * STSCHG0/1 GPIO1/4 + * CARD0/1 GPIO2/5 + * Db1550: 0/1, 21/22, 3/5 + */ + +#define DB1XXX_HAS_PCMCIA +#define F_SWAPPED (bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT) + +#if defined(CONFIG_MIPS_DB1000) +#define DB1XXX_PCMCIA_CD0 AU1000_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1000_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1000_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1000_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1000_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1000_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1100) +#define DB1XXX_PCMCIA_CD0 AU1100_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1100_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1100_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1100_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1100_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1100_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1500) +#define DB1XXX_PCMCIA_CD0 AU1500_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1500_GPIO1_INT +#define DB1XXX_PCMCIA_CARD0 AU1500_GPIO2_INT +#define DB1XXX_PCMCIA_CD1 AU1500_GPIO3_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1500_GPIO4_INT +#define DB1XXX_PCMCIA_CARD1 AU1500_GPIO5_INT +#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#elif defined(CONFIG_MIPS_DB1550) +#define DB1XXX_PCMCIA_CD0 AU1550_GPIO0_INT +#define DB1XXX_PCMCIA_STSCHG0 AU1550_GPIO21_INT +#define DB1XXX_PCMCIA_CARD0 AU1550_GPIO3_INT +#define DB1XXX_PCMCIA_CD1 AU1550_GPIO1_INT +#define DB1XXX_PCMCIA_STSCHG1 AU1550_GPIO22_INT +#define DB1XXX_PCMCIA_CARD1 AU1550_GPIO5_INT +#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#else +/* other board: no PCMCIA */ +#undef DB1XXX_HAS_PCMCIA +#undef F_SWAPPED +#define F_SWAPPED 0 +#if defined(CONFIG_MIPS_BOSPORUS) +#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ +#define BOARD_FLASH_WIDTH 2 /* 16-bits */ +#elif defined(CONFIG_MIPS_MIRAGE) +#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ +#define BOARD_FLASH_WIDTH 4 /* 32-bits */ +#endif +#endif + +static int __init db1xxx_dev_init(void) +{ +#ifdef DB1XXX_HAS_PCMCIA + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + DB1XXX_PCMCIA_CARD0, + DB1XXX_PCMCIA_CD0, + /*DB1XXX_PCMCIA_STSCHG0*/0, + 0, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x004000000, + PCMCIA_ATTR_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x004000000, + PCMCIA_MEM_PHYS_ADDR + 0x004400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x004000000, + PCMCIA_IO_PHYS_ADDR + 0x004010000 - 1, + DB1XXX_PCMCIA_CARD1, + DB1XXX_PCMCIA_CD1, + /*DB1XXX_PCMCIA_STSCHG1*/0, + 0, + 1); +#endif + db1x_register_norflash(BOARD_FLASH_SIZE, BOARD_FLASH_WIDTH, F_SWAPPED); + return 0; +} +device_initcall(db1xxx_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1000/board_setup.c b/arch/mips/alchemy/devboards/pb1000/board_setup.c index cd273545e81..b5311d8a29a 100644 --- a/arch/mips/alchemy/devboards/pb1000/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1000/board_setup.c @@ -31,11 +31,7 @@ #include <asm/mach-pb1x00/pb1000.h> #include <prom.h> - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_15, IRQF_TRIGGER_LOW, 0 }, -}; - +#include "../platform.h" const char *get_system_type(void) { @@ -46,25 +42,14 @@ void board_reset(void) { } -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} - void __init board_setup(void) { u32 pin_func, static_cfg0; u32 sys_freqctrl, sys_clksrc; u32 prid = read_c0_prid(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + sys_freqctrl = 0; + sys_clksrc = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); @@ -193,3 +178,16 @@ void __init board_setup(void) break; } } + +static int __init pb1000_init_irq(void) +{ + set_irq_type(AU1000_GPIO15_INT, IRQF_TRIGGER_LOW); + return 0; +} +arch_initcall(pb1000_init_irq); + +static int __init pb1000_device_init(void) +{ + return db1x_register_norflash(8 * 1024 * 1024, 4, 0); +} +device_initcall(pb1000_device_init); diff --git a/arch/mips/alchemy/devboards/pb1100/Makefile b/arch/mips/alchemy/devboards/pb1100/Makefile index c586dd7e91d..7e3756c83fe 100644 --- a/arch/mips/alchemy/devboards/pb1100/Makefile +++ b/arch/mips/alchemy/devboards/pb1100/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1100 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1100/board_setup.c b/arch/mips/alchemy/devboards/pb1100/board_setup.c index 61263081ef5..c7b4caa81a3 100644 --- a/arch/mips/alchemy/devboards/pb1100/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1100/board_setup.c @@ -29,19 +29,11 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1100.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_9, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card Fully_Inserted# */ - { AU1000_GPIO_10, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card STSCHG# */ - { AU1000_GPIO_11, IRQF_TRIGGER_LOW, 0 }, /* PCMCIA Card IRQ# */ - { AU1000_GPIO_13, IRQF_TRIGGER_LOW, 0 }, /* DC_IRQ# */ -}; - - const char *get_system_type(void) { return "Alchemy Pb1100"; @@ -49,43 +41,15 @@ const char *get_system_type(void) void board_reset(void) { - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1100_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { volatile void __iomem *base = (volatile void __iomem *)0xac000000UL; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif - -#ifdef CONFIG_FB_AU1100 - argptr = strstr(argptr, "video="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - /* default panel */ - /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/ - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); /* Set AUX clock to 12 MHz * 8 = 96 MHz */ au_writel(8, SYS_AUXPLL); @@ -155,3 +119,14 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1100_init_irq(void) +{ + set_irq_type(AU1100_GPIO9_INT, IRQF_TRIGGER_LOW); /* PCCD# */ + set_irq_type(AU1100_GPIO10_INT, IRQF_TRIGGER_LOW); /* PCSTSCHG# */ + set_irq_type(AU1100_GPIO11_INT, IRQF_TRIGGER_LOW); /* PCCard# */ + set_irq_type(AU1100_GPIO13_INT, IRQF_TRIGGER_LOW); /* DC_IRQ# */ + + return 0; +} +arch_initcall(pb1100_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1100/platform.c b/arch/mips/alchemy/devboards/pb1100/platform.c new file mode 100644 index 00000000000..2c8dc29759f --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1100/platform.c @@ -0,0 +1,50 @@ +/* + * Pb1100 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1100_dev_init(void) +{ + int swapped; + + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1100_GPIO11_INT, /* card */ + AU1100_GPIO9_INT, /* insert */ + /*AU1100_GPIO10_INT*/0, /* stschg */ + 0, /* eject */ + 0); /* id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1100_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1200/Makefile b/arch/mips/alchemy/devboards/pb1200/Makefile index c8c3a99fb68..2ea9b02ef09 100644 --- a/arch/mips/alchemy/devboards/pb1200/Makefile +++ b/arch/mips/alchemy/devboards/pb1200/Makefile @@ -2,6 +2,6 @@ # Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards. # -obj-y := board_setup.o irqmap.o platform.o +obj-y := board_setup.o platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/devboards/pb1200/board_setup.c b/arch/mips/alchemy/devboards/pb1200/board_setup.c index 94e6b7e7753..3184063f804 100644 --- a/arch/mips/alchemy/devboards/pb1200/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1200/board_setup.c @@ -25,11 +25,23 @@ */ #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/sched.h> -#include <prom.h> -#include <au1xxx.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#ifdef CONFIG_MIPS_PB1200 +#include <asm/mach-pb1x00/pb1200.h> +#endif + +#ifdef CONFIG_MIPS_DB1200 +#include <asm/mach-db1x00/db1200.h> +#define PB1200_INT_BEGIN DB1200_INT_BEGIN +#define PB1200_INT_END DB1200_INT_END +#endif +#include <prom.h> const char *get_system_type(void) { @@ -38,25 +50,15 @@ const char *get_system_type(void) void board_reset(void) { - bcsr->resets = 0; - bcsr->system = 0; + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#ifdef CONFIG_FB_AU1200 - strcat(argptr, " video=au1200fb:panel:bs"); -#endif + printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); + bcsr_init(PB1200_BCSR_PHYS_ADDR, + PB1200_BCSR_PHYS_ADDR + PB1200_BCSR_HEXLED_OFS); #if 0 { @@ -82,7 +84,7 @@ void __init board_setup(void) u32 pin_func; /* Select SMBus in CPLD */ - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); pin_func = au_readl(SYS_PINFUNC); au_sync(); @@ -116,38 +118,54 @@ void __init board_setup(void) /* * The Pb1200 development board uses external MUX for PSC0 to - * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI + * support SMB/SPI. bcsr_resets bit 12: 0=SMB 1=SPI */ #ifdef CONFIG_I2C_AU1550 - bcsr->resets &= ~BCSR_RESETS_PCS0MUX; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC0MUX, 0); #endif au_sync(); +} -#ifdef CONFIG_MIPS_PB1200 - printk(KERN_INFO "AMD Alchemy Pb1200 Board\n"); -#endif -#ifdef CONFIG_MIPS_DB1200 - printk(KERN_INFO "AMD Alchemy Db1200 Board\n"); -#endif +static int __init pb1200_init_irq(void) +{ + /* We have a problem with CPLD rev 3. */ + if (BCSR_WHOAMI_CPLD(bcsr_read(BCSR_WHOAMI)) <= 3) { + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); + printk(KERN_ERR "updated to latest revision. This software will\n"); + printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + printk(KERN_ERR "WARNING!!!\n"); + panic("Game over. Your score is 0."); + } + + set_irq_type(AU1200_GPIO7_INT, IRQF_TRIGGER_LOW); + bcsr_init_irq(PB1200_INT_BEGIN, PB1200_INT_END, AU1200_GPIO7_INT); + + return 0; } +arch_initcall(pb1200_init_irq); + int board_au1200fb_panel(void) { - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - int p; - - p = bcsr->switches; - p >>= 8; - p &= 0x0F; - return p; + return (bcsr_read(BCSR_SWITCHES) >> 8) & 0x0f; } int board_au1200fb_panel_init(void) { /* Apply power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL); /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */ return 0; } @@ -155,10 +173,8 @@ int board_au1200fb_panel_init(void) int board_au1200fb_panel_shutdown(void) { /* Remove power */ - BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR; - - bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | - BCSR_BOARD_LCDBL); + bcsr_mod(BCSR_BOARD, BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | + BCSR_BOARD_LCDBL, 0); /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */ return 0; } diff --git a/arch/mips/alchemy/devboards/pb1200/irqmap.c b/arch/mips/alchemy/devboards/pb1200/irqmap.c deleted file mode 100644 index fe47498da28..00000000000 --- a/arch/mips/alchemy/devboards/pb1200/irqmap.c +++ /dev/null @@ -1,134 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> - -#include <asm/mach-au1x00/au1000.h> - -#ifdef CONFIG_MIPS_PB1200 -#include <asm/mach-pb1x00/pb1200.h> -#endif - -#ifdef CONFIG_MIPS_DB1200 -#include <asm/mach-db1x00/db1200.h> -#define PB1200_INT_BEGIN DB1200_INT_BEGIN -#define PB1200_INT_END DB1200_INT_END -#endif - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - /* This is external interrupt cascade */ - { AU1000_GPIO_7, IRQF_TRIGGER_LOW, 0 }, -}; - - -/* - * Support for External interrupts on the Pb1200 Development platform. - */ - -static void pb1200_cascade_handler(unsigned int irq, struct irq_desc *d) -{ - unsigned short bisr = bcsr->int_status; - - for ( ; bisr; bisr &= bisr - 1) - generic_handle_irq(PB1200_INT_BEGIN + __ffs(bisr)); -} - -/* NOTE: both the enable and mask bits must be cleared, otherwise the - * CPLD generates tons of spurious interrupts (at least on the DB1200). - */ -static void pb1200_mask_irq(unsigned int irq_nr) -{ - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); - au_sync(); -} - -static void pb1200_maskack_irq(unsigned int irq_nr) -{ - bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->int_status = 1 << (irq_nr - PB1200_INT_BEGIN); /* ack */ - au_sync(); -} - -static void pb1200_unmask_irq(unsigned int irq_nr) -{ - bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN); - bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN); - au_sync(); -} - -static struct irq_chip pb1200_cpld_irq_type = { -#ifdef CONFIG_MIPS_PB1200 - .name = "Pb1200 Ext", -#endif -#ifdef CONFIG_MIPS_DB1200 - .name = "Db1200 Ext", -#endif - .mask = pb1200_mask_irq, - .mask_ack = pb1200_maskack_irq, - .unmask = pb1200_unmask_irq, -}; - -void __init board_init_irq(void) -{ - unsigned int irq; - - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); - -#ifdef CONFIG_MIPS_PB1200 - /* We have a problem with CPLD rev 3. */ - if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) { - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n"); - printk(KERN_ERR "updated to latest revision. This software will\n"); - printk(KERN_ERR "not work on anything less than CPLD rev 4.\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - printk(KERN_ERR "WARNING!!!\n"); - panic("Game over. Your score is 0."); - } -#endif - /* mask & disable & ack all */ - bcsr->intclr_mask = 0xffff; - bcsr->intclr = 0xffff; - bcsr->int_status = 0xffff; - au_sync(); - - for (irq = PB1200_INT_BEGIN; irq <= PB1200_INT_END; irq++) - set_irq_chip_and_handler_name(irq, &pb1200_cpld_irq_type, - handle_level_irq, "level"); - - set_irq_chained_handler(AU1000_GPIO_7, pb1200_cascade_handler); -} diff --git a/arch/mips/alchemy/devboards/pb1200/platform.c b/arch/mips/alchemy/devboards/pb1200/platform.c index b93dff4a678..3ef2dceeb79 100644 --- a/arch/mips/alchemy/devboards/pb1200/platform.c +++ b/arch/mips/alchemy/devboards/pb1200/platform.c @@ -26,27 +26,30 @@ #include <asm/mach-au1x00/au1xxx.h> #include <asm/mach-au1x00/au1100_mmc.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" static int mmc_activity; static void pb1200mmc0_set_power(void *mmc_host, int state) { if (state) - bcsr->board |= BCSR_BOARD_SD0PWR; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD0PWR); else - bcsr->board &= ~BCSR_BOARD_SD0PWR; + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD0PWR, 0); - au_sync_delay(1); + msleep(1); } static int pb1200mmc0_card_readonly(void *mmc_host) { - return (bcsr->status & BCSR_STATUS_SD0WP) ? 1 : 0; + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD0WP) ? 1 : 0; } static int pb1200mmc0_card_inserted(void *mmc_host) { - return (bcsr->sig_status & BCSR_INT_SD0INSERT) ? 1 : 0; + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD0INSERT) ? 1 : 0; } static void pb1200_mmcled_set(struct led_classdev *led, @@ -54,10 +57,10 @@ static void pb1200_mmcled_set(struct led_classdev *led, { if (brightness != LED_OFF) { if (++mmc_activity == 1) - bcsr->disk_leds &= ~(1 << 8); + bcsr_mod(BCSR_LEDS, BCSR_LEDS_LED0, 0); } else { if (--mmc_activity == 0) - bcsr->disk_leds |= (1 << 8); + bcsr_mod(BCSR_LEDS, 0, BCSR_LEDS_LED0); } } @@ -65,27 +68,25 @@ static struct led_classdev pb1200mmc_led = { .brightness_set = pb1200_mmcled_set, }; -#ifndef CONFIG_MIPS_DB1200 static void pb1200mmc1_set_power(void *mmc_host, int state) { if (state) - bcsr->board |= BCSR_BOARD_SD1PWR; + bcsr_mod(BCSR_BOARD, 0, BCSR_BOARD_SD1PWR); else - bcsr->board &= ~BCSR_BOARD_SD1PWR; + bcsr_mod(BCSR_BOARD, BCSR_BOARD_SD1PWR, 0); - au_sync_delay(1); + msleep(1); } static int pb1200mmc1_card_readonly(void *mmc_host) { - return (bcsr->status & BCSR_STATUS_SD1WP) ? 1 : 0; + return (bcsr_read(BCSR_STATUS) & BCSR_STATUS_SD1WP) ? 1 : 0; } static int pb1200mmc1_card_inserted(void *mmc_host) { - return (bcsr->sig_status & BCSR_INT_SD1INSERT) ? 1 : 0; + return (bcsr_read(BCSR_SIGSTAT) & BCSR_INT_SD1INSERT) ? 1 : 0; } -#endif const struct au1xmmc_platform_data au1xmmc_platdata[2] = { [0] = { @@ -95,7 +96,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#ifndef CONFIG_MIPS_DB1200 [1] = { .set_power = pb1200mmc1_set_power, .card_inserted = pb1200mmc1_card_inserted, @@ -103,7 +103,6 @@ const struct au1xmmc_platform_data au1xmmc_platdata[2] = { .cd_setup = NULL, /* use poll-timer in driver */ .led = &pb1200mmc_led, }, -#endif }; static struct resource ide_resources[] = { @@ -169,8 +168,36 @@ static struct platform_device *board_platform_devices[] __initdata = { static int __init board_register_devices(void) { + int swapped; + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + PB1200_PC0_INT, + PB1200_PC0_INSERT_INT, + /*PB1200_PC0_STSCHG_INT*/0, + PB1200_PC0_EJECT_INT, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x008000000, + PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x008000000, + PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + PB1200_PC1_INT, + PB1200_PC1_INSERT_INT, + /*PB1200_PC1_STSCHG_INT*/0, + PB1200_PC1_EJECT_INT, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1200_SWAPBOOT; + db1x_register_norflash(128 * 1024 * 1024, 2, swapped); + return platform_add_devices(board_platform_devices, ARRAY_SIZE(board_platform_devices)); } - -arch_initcall(board_register_devices); +device_initcall(board_register_devices); diff --git a/arch/mips/alchemy/devboards/pb1500/Makefile b/arch/mips/alchemy/devboards/pb1500/Makefile index 173b419a747..e83b151b5b6 100644 --- a/arch/mips/alchemy/devboards/pb1500/Makefile +++ b/arch/mips/alchemy/devboards/pb1500/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1500 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1500/board_setup.c b/arch/mips/alchemy/devboards/pb1500/board_setup.c index d7a56569e7e..fa9770ac358 100644 --- a/arch/mips/alchemy/devboards/pb1500/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1500/board_setup.c @@ -29,22 +29,14 @@ #include <linux/interrupt.h> #include <asm/mach-au1x00/au1000.h> -#include <asm/mach-pb1x00/pb1500.h> +#include <asm/mach-db1x00/bcsr.h> #include <prom.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, + [12] = { -1, AU1500_PCI_INTA, 0xff, 0xff, 0xff }, /* IDSEL 12 - HPT370 */ + [13] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, AU1500_PCI_INTC, AU1500_PCI_INTD }, /* IDSEL 13 - PCI slot */ }; @@ -55,35 +47,16 @@ const char *get_system_type(void) void board_reset(void) { - /* Hit BCSR.RST_VDDI[SOFT_RESET] */ - au_writel(0x00000000, PB1500_RST_VDDI); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { u32 pin_func; u32 sys_freqctrl, sys_clksrc; - char *argptr; - - argptr = prom_getcmdline(); -#ifdef CONFIG_SERIAL_8250_CONSOLE - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif -#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000) - /* au1000 does not support vra, au1500 and au1100 do */ - strcat(argptr, " au1000_audio=vra"); - argptr = prom_getcmdline(); -#endif + bcsr_init(DB1000_BCSR_PHYS_ADDR, + DB1000_BCSR_PHYS_ADDR + DB1000_BCSR_HEXLED_OFS); sys_clksrc = sys_freqctrl = pin_func = 0; /* Set AUX clock to 12 MHz * 8 = 96 MHz */ @@ -163,3 +136,18 @@ void __init board_setup(void) au_sync(); } } + +static int __init pb1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO9_INT, IRQF_TRIGGER_LOW); /* CD0# */ + set_irq_type(AU1500_GPIO10_INT, IRQF_TRIGGER_LOW); /* CARD0 */ + set_irq_type(AU1500_GPIO11_INT, IRQF_TRIGGER_LOW); /* STSCHG0# */ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(pb1500_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1500/platform.c b/arch/mips/alchemy/devboards/pb1500/platform.c new file mode 100644 index 00000000000..d443bc7aa76 --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1500/platform.c @@ -0,0 +1,49 @@ +/* + * Pb1500 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1500_dev_init(void) +{ + int swapped; + + /* PCMCIA. single socket, identical to Pb1500 */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1500_GPIO11_INT, /* card */ + AU1500_GPIO9_INT, /* insert */ + /*AU1500_GPIO10_INT*/0, /* stschg */ + 0, /* eject */ + 0); /* id */ + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_DB1000_SWAPBOOT; + db1x_register_norflash(64 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1500_dev_init); diff --git a/arch/mips/alchemy/devboards/pb1550/Makefile b/arch/mips/alchemy/devboards/pb1550/Makefile index cff95bcdb2c..9661b6ec5dd 100644 --- a/arch/mips/alchemy/devboards/pb1550/Makefile +++ b/arch/mips/alchemy/devboards/pb1550/Makefile @@ -5,4 +5,4 @@ # Makefile for the Alchemy Semiconductor Pb1550 board. # -obj-y := board_setup.o +obj-y := board_setup.o platform.o diff --git a/arch/mips/alchemy/devboards/pb1550/board_setup.c b/arch/mips/alchemy/devboards/pb1550/board_setup.c index b6e9e7d247a..1e8fb3ddd72 100644 --- a/arch/mips/alchemy/devboards/pb1550/board_setup.c +++ b/arch/mips/alchemy/devboards/pb1550/board_setup.c @@ -32,18 +32,15 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-db1x00/bcsr.h> +#include <asm/mach-au1x00/gpio.h> #include <prom.h> char irq_tab_alchemy[][5] __initdata = { - [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */ - [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, + [12] = { -1, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD, AU1550_PCI_INTA }, /* IDSEL 12 - PCI slot 2 (left) */ + [13] = { -1, AU1550_PCI_INTA, AU1550_PCI_INTB, AU1550_PCI_INTC, AU1550_PCI_INTD }, /* IDSEL 13 - PCI slot 1 (right) */ }; const char *get_system_type(void) @@ -53,28 +50,17 @@ const char *get_system_type(void) void board_reset(void) { - /* Hit BCSR.SYSTEM[RESET] */ - au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C); -} - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); + bcsr_write(BCSR_SYSTEM, 0); } void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + bcsr_init(PB1550_BCSR_PHYS_ADDR, + PB1550_BCSR_PHYS_ADDR + PB1550_BCSR_HEXLED_OFS); + + alchemy_gpio2_enable(); /* * Enable PSC1 SYNC for AC'97. Normaly done in audio driver, @@ -85,8 +71,21 @@ void __init board_setup(void) pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1; au_writel(pin_func, SYS_PINFUNC); - au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */ - au_sync(); + bcsr_write(BCSR_PCMCIA, 0); /* turn off PCMCIA power */ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n"); } + +static int __init pb1550_init_irq(void) +{ + set_irq_type(AU1550_GPIO0_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1550_GPIO1_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1550_GPIO201_205_INT, IRQF_TRIGGER_HIGH); + + /* enable both PCMCIA card irqs in the shared line */ + alchemy_gpio2_enable_int(201); + alchemy_gpio2_enable_int(202); + + return 0; +} +arch_initcall(pb1550_init_irq); diff --git a/arch/mips/alchemy/devboards/pb1550/platform.c b/arch/mips/alchemy/devboards/pb1550/platform.c new file mode 100644 index 00000000000..d7150d0f49c --- /dev/null +++ b/arch/mips/alchemy/devboards/pb1550/platform.c @@ -0,0 +1,69 @@ +/* + * Pb1550 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-db1x00/bcsr.h> + +#include "../platform.h" + +static int __init pb1550_dev_init(void) +{ + int swapped; + + /* Pb1550, like all others, also has statuschange irqs; however they're + * wired up on one of the Au1550's shared GPIO201_205 line, which also + * services the PCMCIA card interrupts. So we ignore statuschange and + * use the GPIO201_205 exclusively for card interrupts, since a) pcmcia + * drivers are used to shared irqs and b) statuschange isn't really use- + * ful anyway. + */ + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR, + PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_MEM_PHYS_ADDR, + PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + PCMCIA_IO_PHYS_ADDR, + PCMCIA_IO_PHYS_ADDR + 0x000010000 - 1, + AU1550_GPIO201_205_INT, + AU1550_GPIO0_INT, + 0, + 0, + 0); + + db1x_register_pcmcia_socket(PCMCIA_ATTR_PHYS_ADDR + 0x008000000, + PCMCIA_ATTR_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_MEM_PHYS_ADDR + 0x008000000, + PCMCIA_MEM_PHYS_ADDR + 0x008400000 - 1, + PCMCIA_IO_PHYS_ADDR + 0x008000000, + PCMCIA_IO_PHYS_ADDR + 0x008010000 - 1, + AU1550_GPIO201_205_INT, + AU1550_GPIO1_INT, + 0, + 0, + 1); + + swapped = bcsr_read(BCSR_STATUS) & BCSR_STATUS_PB1550_SWAPBOOT; + db1x_register_norflash(128 * 1024 * 1024, 4, swapped); + + return 0; +} +device_initcall(pb1550_dev_init); diff --git a/arch/mips/alchemy/devboards/platform.c b/arch/mips/alchemy/devboards/platform.c new file mode 100644 index 00000000000..49a4b3244d8 --- /dev/null +++ b/arch/mips/alchemy/devboards/platform.c @@ -0,0 +1,222 @@ +/* + * devoard misc stuff. + */ + +#include <linux/init.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/map.h> +#include <linux/mtd/physmap.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/pm.h> + +#include <asm/reboot.h> +#include <asm/mach-db1x00/bcsr.h> + +static void db1x_power_off(void) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, BCSR_SYSTEM_PWROFF | BCSR_SYSTEM_RESET); +} + +static void db1x_reset(char *c) +{ + bcsr_write(BCSR_RESETS, 0); + bcsr_write(BCSR_SYSTEM, 0); +} + +static int __init db1x_poweroff_setup(void) +{ + if (!pm_power_off) + pm_power_off = db1x_power_off; + if (!_machine_halt) + _machine_halt = db1x_power_off; + if (!_machine_restart) + _machine_restart = db1x_reset; + + return 0; +} +late_initcall(db1x_poweroff_setup); + +/* register a pcmcia socket */ +int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, + phys_addr_t pcmcia_attr_end, + phys_addr_t pcmcia_mem_start, + phys_addr_t pcmcia_mem_end, + phys_addr_t pcmcia_io_start, + phys_addr_t pcmcia_io_end, + int card_irq, + int cd_irq, + int stschg_irq, + int eject_irq, + int id) +{ + int cnt, i, ret; + struct resource *sr; + struct platform_device *pd; + + cnt = 5; + if (eject_irq) + cnt++; + if (stschg_irq) + cnt++; + + sr = kzalloc(sizeof(struct resource) * cnt, GFP_KERNEL); + if (!sr) + return -ENOMEM; + + pd = platform_device_alloc("db1xxx_pcmcia", id); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + sr[0].name = "pcmcia-attr"; + sr[0].flags = IORESOURCE_MEM; + sr[0].start = pcmcia_attr_start; + sr[0].end = pcmcia_attr_end; + + sr[1].name = "pcmcia-mem"; + sr[1].flags = IORESOURCE_MEM; + sr[1].start = pcmcia_mem_start; + sr[1].end = pcmcia_mem_end; + + sr[2].name = "pcmcia-io"; + sr[2].flags = IORESOURCE_MEM; + sr[2].start = pcmcia_io_start; + sr[2].end = pcmcia_io_end; + + sr[3].name = "insert"; + sr[3].flags = IORESOURCE_IRQ; + sr[3].start = sr[3].end = cd_irq; + + sr[4].name = "card"; + sr[4].flags = IORESOURCE_IRQ; + sr[4].start = sr[4].end = card_irq; + + i = 5; + if (stschg_irq) { + sr[i].name = "stschg"; + sr[i].flags = IORESOURCE_IRQ; + sr[i].start = sr[i].end = stschg_irq; + i++; + } + if (eject_irq) { + sr[i].name = "eject"; + sr[i].flags = IORESOURCE_IRQ; + sr[i].start = sr[i].end = eject_irq; + } + + pd->resource = sr; + pd->num_resources = cnt; + + ret = platform_device_add(pd); + if (!ret) + return 0; + + platform_device_put(pd); +out: + kfree(sr); + return ret; +} + +#define YAMON_SIZE 0x00100000 +#define YAMON_ENV_SIZE 0x00040000 + +int __init db1x_register_norflash(unsigned long size, int width, + int swapped) +{ + struct physmap_flash_data *pfd; + struct platform_device *pd; + struct mtd_partition *parts; + struct resource *res; + int ret, i; + + if (size < (8 * 1024 * 1024)) + return -EINVAL; + + ret = -ENOMEM; + parts = kzalloc(sizeof(struct mtd_partition) * 5, GFP_KERNEL); + if (!parts) + goto out; + + res = kzalloc(sizeof(struct resource), GFP_KERNEL); + if (!res) + goto out1; + + pfd = kzalloc(sizeof(struct physmap_flash_data), GFP_KERNEL); + if (!pfd) + goto out2; + + pd = platform_device_alloc("physmap-flash", 0); + if (!pd) + goto out3; + + /* NOR flash ends at 0x20000000, regardless of size */ + res->start = 0x20000000 - size; + res->end = 0x20000000 - 1; + res->flags = IORESOURCE_MEM; + + /* partition setup. Most Develboards have a switch which allows + * to swap the physical locations of the 2 NOR flash banks. + */ + i = 0; + if (!swapped) { + /* first NOR chip */ + parts[i].offset = 0; + parts[i].name = "User FS"; + parts[i].size = size / 2; + i++; + } + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "User FS 2"; + parts[i].size = (size / 2) - (0x20000000 - 0x1fc00000); + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "YAMON"; + parts[i].size = YAMON_SIZE; + parts[i].mask_flags = MTD_WRITEABLE; + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "raw kernel"; + parts[i].size = 0x00400000 - YAMON_SIZE - YAMON_ENV_SIZE; + i++; + + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "YAMON Env"; + parts[i].size = YAMON_ENV_SIZE; + parts[i].mask_flags = MTD_WRITEABLE; + i++; + + if (swapped) { + parts[i].offset = MTDPART_OFS_APPEND; + parts[i].name = "User FS"; + parts[i].size = size / 2; + i++; + } + + pfd->width = width; + pfd->parts = parts; + pfd->nr_parts = 5; + + pd->dev.platform_data = pfd; + pd->resource = res; + pd->num_resources = 1; + + ret = platform_device_add(pd); + if (!ret) + return ret; + + platform_device_put(pd); +out3: + kfree(pfd); +out2: + kfree(res); +out1: + kfree(parts); +out: + return ret; +} diff --git a/arch/mips/alchemy/devboards/platform.h b/arch/mips/alchemy/devboards/platform.h new file mode 100644 index 00000000000..5ac055d2cda --- /dev/null +++ b/arch/mips/alchemy/devboards/platform.h @@ -0,0 +1,21 @@ +#ifndef _DEVBOARD_PLATFORM_H_ +#define _DEVBOARD_PLATFORM_H_ + +#include <linux/init.h> + +int __init db1x_register_pcmcia_socket(phys_addr_t pcmcia_attr_start, + phys_addr_t pcmcia_attr_len, + phys_addr_t pcmcia_mem_start, + phys_addr_t pcmcia_mem_end, + phys_addr_t pcmcia_io_start, + phys_addr_t pcmcia_io_end, + int card_irq, + int cd_irq, + int stschg_irq, + int eject_irq, + int id); + +int __init db1x_register_norflash(unsigned long size, int width, + int swapped); + +#endif diff --git a/arch/mips/alchemy/devboards/pm.c b/arch/mips/alchemy/devboards/pm.c index 632f9862a0f..4bbd3133e45 100644 --- a/arch/mips/alchemy/devboards/pm.c +++ b/arch/mips/alchemy/devboards/pm.c @@ -10,6 +10,7 @@ #include <linux/sysfs.h> #include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/gpio.h> +#include <asm/mach-db1x00/bcsr.h> /* * Generic suspend userspace interface for Alchemy development boards. @@ -26,6 +27,20 @@ static unsigned long db1x_pm_last_wakesrc; static int db1x_pm_enter(suspend_state_t state) { + unsigned short bcsrs[16]; + int i, j, hasint; + + /* save CPLD regs */ + hasint = bcsr_read(BCSR_WHOAMI); + hasint = BCSR_WHOAMI_BOARD(hasint) >= BCSR_WHOAMI_DB1200; + j = (hasint) ? BCSR_MASKSET : BCSR_SYSTEM; + + for (i = BCSR_STATUS; i <= j; i++) + bcsrs[i] = bcsr_read(i); + + /* shut off hexleds */ + bcsr_write(BCSR_HEXCLEAR, 3); + /* enable GPIO based wakeup */ alchemy_gpio1_input_enable(); @@ -52,6 +67,23 @@ static int db1x_pm_enter(suspend_state_t state) /* ...and now the sandman can come! */ au_sleep(); + + /* restore CPLD regs */ + for (i = BCSR_STATUS; i <= BCSR_SYSTEM; i++) + bcsr_write(i, bcsrs[i]); + + /* restore CPLD int registers */ + if (hasint) { + bcsr_write(BCSR_INTCLR, 0xffff); + bcsr_write(BCSR_MASKCLR, 0xffff); + bcsr_write(BCSR_INTSTAT, 0xffff); + bcsr_write(BCSR_INTSET, bcsrs[BCSR_INTSET]); + bcsr_write(BCSR_MASKSET, bcsrs[BCSR_MASKSET]); + } + + /* light up hexleds */ + bcsr_write(BCSR_HEXCLEAR, 0); + return 0; } diff --git a/arch/mips/alchemy/devboards/prom.c b/arch/mips/alchemy/devboards/prom.c index 0042bd6b1d7..b30df5c97ad 100644 --- a/arch/mips/alchemy/devboards/prom.c +++ b/arch/mips/alchemy/devboards/prom.c @@ -60,3 +60,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/mtx-1/Makefile b/arch/mips/alchemy/mtx-1/Makefile index 7c67b3d33be..4a53815b3c6 100644 --- a/arch/mips/alchemy/mtx-1/Makefile +++ b/arch/mips/alchemy/mtx-1/Makefile @@ -6,7 +6,7 @@ # Makefile for 4G Systems MTX-1 board. # -lib-y := init.o board_setup.o irqmap.o +lib-y := init.o board_setup.o obj-y := platform.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/mtx-1/board_setup.c b/arch/mips/alchemy/mtx-1/board_setup.c index 45b61c9b82b..a9f0336e1f1 100644 --- a/arch/mips/alchemy/mtx-1/board_setup.c +++ b/arch/mips/alchemy/mtx-1/board_setup.c @@ -30,32 +30,43 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> #include <prom.h> +char irq_tab_alchemy[][5] __initdata = { + [0] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 00 - AdapterA-Slot0 (top) */ + [1] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ + [2] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 02 - AdapterB-Slot0 (top) */ + [3] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ + [4] = { -1, AU1500_PCI_INTA, AU1500_PCI_INTB, 0xff, 0xff }, /* IDSEL 04 - AdapterC-Slot0 (top) */ + [5] = { -1, AU1500_PCI_INTB, AU1500_PCI_INTA, 0xff, 0xff }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ + [6] = { -1, AU1500_PCI_INTC, AU1500_PCI_INTD, 0xff, 0xff }, /* IDSEL 06 - AdapterD-Slot0 (top) */ + [7] = { -1, AU1500_PCI_INTD, AU1500_PCI_INTC, 0xff, 0xff }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ +}; + extern int (*board_pci_idsel)(unsigned int devsel, int assert); int mtx1_pci_idsel(unsigned int devsel, int assert); -void board_reset(void) +static void mtx1_reset(char *c) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writel(0x00000000, 0xAE00001C); } -void __init board_setup(void) +static void mtx1_power_off(void) { -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); +} +void __init board_setup(void) +{ alchemy_gpio2_enable(); #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) @@ -86,6 +97,10 @@ void __init board_setup(void) alchemy_gpio_direction_output(211, 1); /* green on */ alchemy_gpio_direction_output(212, 0); /* red off */ + pm_power_off = mtx1_power_off; + _machine_halt = mtx1_power_off; + _machine_restart = mtx1_reset; + printk(KERN_INFO "4G Systems MTX-1 Board\n"); } @@ -109,3 +124,15 @@ mtx1_pci_idsel(unsigned int devsel, int assert) au_sync_udelay(1); return 1; } + +static int __init mtx1_init_irq(void) +{ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(mtx1_init_irq); diff --git a/arch/mips/alchemy/mtx-1/init.c b/arch/mips/alchemy/mtx-1/init.c index 5e871c8d9e9..f8d25575fa0 100644 --- a/arch/mips/alchemy/mtx-1/init.c +++ b/arch/mips/alchemy/mtx-1/init.c @@ -32,6 +32,7 @@ #include <linux/init.h> #include <asm/bootinfo.h> +#include <asm/mach-au1x00/au1000.h> #include <prom.h> @@ -58,3 +59,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/mtx-1/irqmap.c b/arch/mips/alchemy/mtx-1/irqmap.c deleted file mode 100644 index f1ab12ab343..00000000000 --- a/arch/mips/alchemy/mtx-1/irqmap.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/mach-au1x00/au1000.h> - -char irq_tab_alchemy[][5] __initdata = { - [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */ - [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */ - [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */ - [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */ - [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */ - [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */ - [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */ - [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */ -}; - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, -}; - - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile index db3c526f64d..4dc81d794cb 100644 --- a/arch/mips/alchemy/xxs1500/Makefile +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -5,4 +5,6 @@ # Makefile for MyCable XXS1500 board. # -lib-y := init.o board_setup.o irqmap.o +lib-y := init.o board_setup.o platform.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index 4de2d48caed..47b42927607 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -25,31 +25,35 @@ #include <linux/gpio.h> #include <linux/init.h> +#include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/pm.h> +#include <asm/reboot.h> #include <asm/mach-au1x00/au1000.h> #include <prom.h> -void board_reset(void) +static void xxs1500_reset(char *c) { /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */ au_writel(0x00000000, 0xAE00001C); } +static void xxs1500_power_off(void) +{ + printk(KERN_ALERT "It's now safe to remove power\n"); + while (1) + asm volatile (".set mips3 ; wait ; .set mips1"); +} + void __init board_setup(void) { u32 pin_func; -#ifdef CONFIG_SERIAL_8250_CONSOLE - char *argptr; - argptr = prom_getcmdline(); - argptr = strstr(argptr, "console="); - if (argptr == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " console=ttyS0,115200"); - } -#endif + pm_power_off = xxs1500_power_off; + _machine_halt = xxs1500_power_off; + _machine_restart = xxs1500_reset; alchemy_gpio1_input_enable(); alchemy_gpio2_enable(); @@ -68,22 +72,6 @@ void __init board_setup(void) /* Enable DTR = USB power up */ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ -#ifdef CONFIG_PCMCIA_XXS1500 - /* GPIO 0, 1, and 4 are inputs */ - alchemy_gpio_direction_input(0); - alchemy_gpio_direction_input(1); - alchemy_gpio_direction_input(4); - - /* GPIO2 208/9/10/11 are inputs */ - alchemy_gpio_direction_input(208); - alchemy_gpio_direction_input(209); - alchemy_gpio_direction_input(210); - alchemy_gpio_direction_input(211); - - /* Turn off power */ - alchemy_gpio_direction_output(214, 0); -#endif - #ifdef CONFIG_PCI #if defined(__MIPSEB__) au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); @@ -92,3 +80,23 @@ void __init board_setup(void) #endif #endif } + +static int __init xxs1500_init_irq(void) +{ + set_irq_type(AU1500_GPIO204_INT, IRQF_TRIGGER_HIGH); + set_irq_type(AU1500_GPIO201_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO202_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO203_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO205_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO207_INT, IRQF_TRIGGER_LOW); + + set_irq_type(AU1500_GPIO0_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO1_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO2_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO3_INT, IRQF_TRIGGER_LOW); + set_irq_type(AU1500_GPIO4_INT, IRQF_TRIGGER_LOW); /* CF irq */ + set_irq_type(AU1500_GPIO5_INT, IRQF_TRIGGER_LOW); + + return 0; +} +arch_initcall(xxs1500_init_irq); diff --git a/arch/mips/alchemy/xxs1500/init.c b/arch/mips/alchemy/xxs1500/init.c index 456fa142c09..15125c2fda7 100644 --- a/arch/mips/alchemy/xxs1500/init.c +++ b/arch/mips/alchemy/xxs1500/init.c @@ -30,6 +30,7 @@ #include <linux/kernel.h> #include <asm/bootinfo.h> +#include <asm/mach-au1x00/au1000.h> #include <prom.h> @@ -56,3 +57,8 @@ void __init prom_init(void) strict_strtoul(memsize_str, 0, &memsize); add_memory_region(0, memsize, BOOT_MEM_RAM); } + +void prom_putchar(unsigned char c) +{ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/alchemy/xxs1500/irqmap.c b/arch/mips/alchemy/xxs1500/irqmap.c deleted file mode 100644 index 0f0f3012e5f..00000000000 --- a/arch/mips/alchemy/xxs1500/irqmap.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * BRIEF MODULE DESCRIPTION - * Au1xxx irq map table - * - * Copyright 2003 Embedded Edge, LLC - * dan@embeddededge.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/mach-au1x00/au1000.h> - -struct au1xxx_irqmap __initdata au1xxx_irq_map[] = { - { AU1500_GPIO_204, IRQF_TRIGGER_HIGH, 0 }, - { AU1500_GPIO_201, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_202, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_203, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_205, IRQF_TRIGGER_LOW, 0 }, - { AU1500_GPIO_207, IRQF_TRIGGER_LOW, 0 }, - - { AU1000_GPIO_0, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_1, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_2, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_3, IRQF_TRIGGER_LOW, 0 }, - { AU1000_GPIO_4, IRQF_TRIGGER_LOW, 0 }, /* CF interrupt */ - { AU1000_GPIO_5, IRQF_TRIGGER_LOW, 0 }, -}; - -void __init board_init_irq(void) -{ - au1xxx_setup_irqmap(au1xxx_irq_map, ARRAY_SIZE(au1xxx_irq_map)); -} diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c new file mode 100644 index 00000000000..e87c45cde61 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/platform.c @@ -0,0 +1,63 @@ +/* + * XXS1500 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/init.h> +#include <linux/platform_device.h> + +#include <asm/mach-au1x00/au1000.h> + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pcmcia-io", + .flags = IORESOURCE_MEM, + .start = PCMCIA_IO_PHYS_ADDR, + .end = PCMCIA_IO_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-attr", + .flags = IORESOURCE_MEM, + .start = PCMCIA_ATTR_PHYS_ADDR, + .end = PCMCIA_ATTR_PHYS_ADDR + 0x000400000 - 1, + }, + { + .name = "pcmcia-mem", + .flags = IORESOURCE_MEM, + .start = PCMCIA_MEM_PHYS_ADDR, + .end = PCMCIA_MEM_PHYS_ADDR + 0x000400000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); diff --git a/arch/mips/ar7/clock.c b/arch/mips/ar7/clock.c index cc65c8eb391..fc0e7154e8d 100644 --- a/arch/mips/ar7/clock.c +++ b/arch/mips/ar7/clock.c @@ -1,6 +1,7 @@ /* * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -24,6 +25,8 @@ #include <linux/delay.h> #include <linux/gcd.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/addrspace.h> #include <asm/mach-ar7/ar7.h> @@ -94,12 +97,16 @@ struct tnetd7200_clocks { struct tnetd7200_clock usb; }; -int ar7_cpu_clock = 150000000; -EXPORT_SYMBOL(ar7_cpu_clock); -int ar7_bus_clock = 125000000; -EXPORT_SYMBOL(ar7_bus_clock); -int ar7_dsp_clock; -EXPORT_SYMBOL(ar7_dsp_clock); +static struct clk bus_clk = { + .rate = 125000000, +}; + +static struct clk cpu_clk = { + .rate = 150000000, +}; + +static struct clk dsp_clk; +static struct clk vbus_clk; static void approximate(int base, int target, int *prediv, int *postdiv, int *mul) @@ -185,7 +192,7 @@ static int tnetd7300_get_clock(u32 shift, struct tnetd7300_clock *clock, base_clock = AR7_XTAL_CLOCK; break; case BOOT_PLL_SOURCE_CPU: - base_clock = ar7_cpu_clock; + base_clock = cpu_clk.rate; break; } @@ -212,11 +219,11 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, u32 *bootcr, u32 frequency) { int prediv, postdiv, mul; - int base_clock = ar7_bus_clock; + int base_clock = bus_clk.rate; switch ((*bootcr & (BOOT_PLL_SOURCE_MASK << shift)) >> shift) { case BOOT_PLL_SOURCE_BUS: - base_clock = ar7_bus_clock; + base_clock = bus_clk.rate; break; case BOOT_PLL_SOURCE_REF: base_clock = AR7_REF_CLOCK; @@ -225,7 +232,7 @@ static void tnetd7300_set_clock(u32 shift, struct tnetd7300_clock *clock, base_clock = AR7_XTAL_CLOCK; break; case BOOT_PLL_SOURCE_CPU: - base_clock = ar7_cpu_clock; + base_clock = cpu_clk.rate; break; } @@ -247,18 +254,18 @@ static void __init tnetd7300_init_clocks(void) ioremap_nocache(UR8_REGS_CLOCKS, sizeof(struct tnetd7300_clocks)); - ar7_bus_clock = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, + bus_clk.rate = tnetd7300_get_clock(BUS_PLL_SOURCE_SHIFT, &clocks->bus, bootcr, AR7_AFE_CLOCK); if (*bootcr & BOOT_PLL_ASYNC_MODE) - ar7_cpu_clock = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, + cpu_clk.rate = tnetd7300_get_clock(CPU_PLL_SOURCE_SHIFT, &clocks->cpu, bootcr, AR7_AFE_CLOCK); else - ar7_cpu_clock = ar7_bus_clock; + cpu_clk.rate = bus_clk.rate; - if (ar7_dsp_clock == 250000000) + if (dsp_clk.rate == 250000000) tnetd7300_set_clock(DSP_PLL_SOURCE_SHIFT, &clocks->dsp, - bootcr, ar7_dsp_clock); + bootcr, dsp_clk.rate); iounmap(clocks); iounmap(bootcr); @@ -343,20 +350,20 @@ static void __init tnetd7200_init_clocks(void) printk(KERN_INFO "Clocks: Setting DSP clock\n"); calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = + bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; tnetd7200_set_clock(dsp_base, &clocks->dsp, dsp_prediv, dsp_postdiv * 2, dsp_postdiv, dsp_mul * 2, - ar7_bus_clock); + bus_clk.rate); printk(KERN_INFO "Clocks: Setting CPU clock\n"); calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); - ar7_cpu_clock = + cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; tnetd7200_set_clock(cpu_base, &clocks->cpu, cpu_prediv, cpu_postdiv, -1, cpu_mul, - ar7_cpu_clock); + cpu_clk.rate); } else if (*bootcr & BOOT_PLL_2TO1_MODE) { @@ -365,48 +372,90 @@ static void __init tnetd7200_init_clocks(void) printk(KERN_INFO "Clocks: Setting CPU clock\n"); calculate(cpu_base, TNETD7200_DEF_CPU_CLK, &cpu_prediv, &cpu_postdiv, &cpu_mul); - ar7_cpu_clock = ((cpu_base / cpu_prediv) * cpu_mul) + cpu_clk.rate = ((cpu_base / cpu_prediv) * cpu_mul) / cpu_postdiv; tnetd7200_set_clock(cpu_base, &clocks->cpu, cpu_prediv, cpu_postdiv, -1, cpu_mul, - ar7_cpu_clock); + cpu_clk.rate); printk(KERN_INFO "Clocks: Setting DSP clock\n"); calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = ar7_cpu_clock / 2; + bus_clk.rate = cpu_clk.rate / 2; tnetd7200_set_clock(dsp_base, &clocks->dsp, dsp_prediv, dsp_postdiv * 2, dsp_postdiv, - dsp_mul * 2, ar7_bus_clock); + dsp_mul * 2, bus_clk.rate); } else { printk(KERN_INFO "Clocks: Sync 1:1 mode\n"); printk(KERN_INFO "Clocks: Setting DSP clock\n"); calculate(dsp_base, TNETD7200_DEF_DSP_CLK, &dsp_prediv, &dsp_postdiv, &dsp_mul); - ar7_bus_clock = ((dsp_base / dsp_prediv) * dsp_mul) + bus_clk.rate = ((dsp_base / dsp_prediv) * dsp_mul) / dsp_postdiv; tnetd7200_set_clock(dsp_base, &clocks->dsp, dsp_prediv, dsp_postdiv * 2, dsp_postdiv, - dsp_mul * 2, ar7_bus_clock); + dsp_mul * 2, bus_clk.rate); - ar7_cpu_clock = ar7_bus_clock; + cpu_clk.rate = bus_clk.rate; } printk(KERN_INFO "Clocks: Setting USB clock\n"); - usb_base = ar7_bus_clock; + usb_base = bus_clk.rate; calculate(usb_base, TNETD7200_DEF_USB_CLK, &usb_prediv, &usb_postdiv, &usb_mul); tnetd7200_set_clock(usb_base, &clocks->usb, usb_prediv, usb_postdiv, -1, usb_mul, TNETD7200_DEF_USB_CLK); - ar7_dsp_clock = ar7_cpu_clock; + dsp_clk.rate = cpu_clk.rate; iounmap(clocks); iounmap(bootcr); } +/* + * Linux clock API + */ +int clk_enable(struct clk *clk) +{ + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "bus")) + return &bus_clk; + /* cpmac and vbus share the same rate */ + if (!strcmp(id, "cpmac")) + return &vbus_clk; + if (!strcmp(id, "cpu")) + return &cpu_clk; + if (!strcmp(id, "dsp")); + return &dsp_clk; + if (!strcmp(id, "vbus")) + return &vbus_clk; + return ERR_PTR(-ENOENT); +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + int __init ar7_init_clocks(void) { switch (ar7_chip_id()) { @@ -415,12 +464,14 @@ int __init ar7_init_clocks(void) tnetd7200_init_clocks(); break; case AR7_CHIP_7300: - ar7_dsp_clock = tnetd7300_dsp_clock(); + dsp_clk.rate = tnetd7300_dsp_clock(); tnetd7300_init_clocks(); break; default: break; } + /* adjust vbus clock rate */ + vbus_clk.rate = bus_clk.rate / 2; return 0; } diff --git a/arch/mips/ar7/gpio.c b/arch/mips/ar7/gpio.c index 74e14a3dbf4..c32fbb57441 100644 --- a/arch/mips/ar7/gpio.c +++ b/arch/mips/ar7/gpio.c @@ -1,6 +1,7 @@ /* * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> * Copyright (C) 2007 Eugene Konev <ejka@openwrt.org> + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,31 +19,113 @@ */ #include <linux/module.h> +#include <linux/gpio.h> #include <asm/mach-ar7/gpio.h> -static const char *ar7_gpio_list[AR7_GPIO_MAX]; +struct ar7_gpio_chip { + void __iomem *regs; + struct gpio_chip chip; +}; -int gpio_request(unsigned gpio, const char *label) +static int ar7_gpio_get_value(struct gpio_chip *chip, unsigned gpio) { - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; + struct ar7_gpio_chip *gpch = + container_of(chip, struct ar7_gpio_chip, chip); + void __iomem *gpio_in = gpch->regs + AR7_GPIO_INPUT; - if (ar7_gpio_list[gpio]) - return -EBUSY; + return readl(gpio_in) & (1 << gpio); +} + +static void ar7_gpio_set_value(struct gpio_chip *chip, + unsigned gpio, int value) +{ + struct ar7_gpio_chip *gpch = + container_of(chip, struct ar7_gpio_chip, chip); + void __iomem *gpio_out = gpch->regs + AR7_GPIO_OUTPUT; + unsigned tmp; + + tmp = readl(gpio_out) & ~(1 << gpio); + if (value) + tmp |= 1 << gpio; + writel(tmp, gpio_out); +} + +static int ar7_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + struct ar7_gpio_chip *gpch = + container_of(chip, struct ar7_gpio_chip, chip); + void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR; - if (label) - ar7_gpio_list[gpio] = label; - else - ar7_gpio_list[gpio] = "busy"; + writel(readl(gpio_dir) | (1 << gpio), gpio_dir); return 0; } -EXPORT_SYMBOL(gpio_request); -void gpio_free(unsigned gpio) +static int ar7_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) { - BUG_ON(!ar7_gpio_list[gpio]); - ar7_gpio_list[gpio] = NULL; + struct ar7_gpio_chip *gpch = + container_of(chip, struct ar7_gpio_chip, chip); + void __iomem *gpio_dir = gpch->regs + AR7_GPIO_DIR; + + ar7_gpio_set_value(chip, gpio, value); + writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); + + return 0; +} + +static struct ar7_gpio_chip ar7_gpio_chip = { + .chip = { + .label = "ar7-gpio", + .direction_input = ar7_gpio_direction_input, + .direction_output = ar7_gpio_direction_output, + .set = ar7_gpio_set_value, + .get = ar7_gpio_get_value, + .base = 0, + .ngpio = AR7_GPIO_MAX, + } +}; + +int ar7_gpio_enable(unsigned gpio) +{ + void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE; + + writel(readl(gpio_en) | (1 << gpio), gpio_en); + + return 0; +} +EXPORT_SYMBOL(ar7_gpio_enable); + +int ar7_gpio_disable(unsigned gpio) +{ + void __iomem *gpio_en = ar7_gpio_chip.regs + AR7_GPIO_ENABLE; + + writel(readl(gpio_en) & ~(1 << gpio), gpio_en); + + return 0; +} +EXPORT_SYMBOL(ar7_gpio_disable); + +static int __init ar7_gpio_init(void) +{ + int ret; + + ar7_gpio_chip.regs = ioremap_nocache(AR7_REGS_GPIO, + AR7_REGS_GPIO + 0x10); + + if (!ar7_gpio_chip.regs) { + printk(KERN_ERR "ar7-gpio: failed to ioremap regs\n"); + return -ENOMEM; + } + + ret = gpiochip_add(&ar7_gpio_chip.chip); + if (ret) { + printk(KERN_ERR "ar7-gpio: failed to add gpiochip\n"); + return ret; + } + printk(KERN_INFO "ar7-gpio: registered %d GPIOs\n", + ar7_gpio_chip.chip.ngpio); + return ret; } -EXPORT_SYMBOL(gpio_free); +arch_initcall(ar7_gpio_init); diff --git a/arch/mips/ar7/memory.c b/arch/mips/ar7/memory.c index 696c723dc6d..28abfeef09d 100644 --- a/arch/mips/ar7/memory.c +++ b/arch/mips/ar7/memory.c @@ -62,8 +62,7 @@ void __init prom_meminit(void) unsigned long pages; pages = memsize() >> PAGE_SHIFT; - add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, - BOOT_MEM_RAM); + add_memory_region(PHYS_OFFSET, pages << PAGE_SHIFT, BOOT_MEM_RAM); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/ar7/platform.c b/arch/mips/ar7/platform.c index f70a10a8cc9..246df7aca2e 100644 --- a/arch/mips/ar7/platform.c +++ b/arch/mips/ar7/platform.c @@ -34,45 +34,50 @@ #include <linux/etherdevice.h> #include <linux/phy.h> #include <linux/phy_fixed.h> +#include <linux/gpio.h> +#include <linux/clk.h> #include <asm/addrspace.h> #include <asm/mach-ar7/ar7.h> #include <asm/mach-ar7/gpio.h> #include <asm/mach-ar7/prom.h> +/***************************************************************************** + * VLYNQ Bus + ****************************************************************************/ struct plat_vlynq_data { struct plat_vlynq_ops ops; int gpio_bit; int reset_bit; }; - static int vlynq_on(struct vlynq_device *dev) { - int result; + int ret; struct plat_vlynq_data *pdata = dev->dev.platform_data; - result = gpio_request(pdata->gpio_bit, "vlynq"); - if (result) + ret = gpio_request(pdata->gpio_bit, "vlynq"); + if (ret) goto out; ar7_device_reset(pdata->reset_bit); - result = ar7_gpio_disable(pdata->gpio_bit); - if (result) + ret = ar7_gpio_disable(pdata->gpio_bit); + if (ret) goto out_enabled; - result = ar7_gpio_enable(pdata->gpio_bit); - if (result) + ret = ar7_gpio_enable(pdata->gpio_bit); + if (ret) goto out_enabled; - result = gpio_direction_output(pdata->gpio_bit, 0); - if (result) + ret = gpio_direction_output(pdata->gpio_bit, 0); + if (ret) goto out_gpio_enabled; msleep(50); gpio_set_value(pdata->gpio_bit, 1); + msleep(50); return 0; @@ -83,320 +88,384 @@ out_enabled: ar7_device_disable(pdata->reset_bit); gpio_free(pdata->gpio_bit); out: - return result; + return ret; } static void vlynq_off(struct vlynq_device *dev) { struct plat_vlynq_data *pdata = dev->dev.platform_data; + ar7_gpio_disable(pdata->gpio_bit); gpio_free(pdata->gpio_bit); ar7_device_disable(pdata->reset_bit); } -static struct resource physmap_flash_resource = { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x10000000, - .end = 0x107fffff, -}; - -static struct resource cpmac_low_res[] = { +static struct resource vlynq_low_res[] = { { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_MAC0, - .end = AR7_REGS_MAC0 + 0x7ff, + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ0, + .end = AR7_REGS_VLYNQ0 + 0xff, }, { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 27, - .end = 27, + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 29, + .end = 29, }, -}; - -static struct resource cpmac_high_res[] = { { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_MAC1, - .end = AR7_REGS_MAC1 + 0x7ff, + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x04000000, + .end = 0x04ffffff, }, { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 41, - .end = 41, + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 80, + .end = 111, }, }; -static struct resource vlynq_low_res[] = { +static struct resource vlynq_high_res[] = { { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_VLYNQ0, - .end = AR7_REGS_VLYNQ0 + 0xff, + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_VLYNQ1, + .end = AR7_REGS_VLYNQ1 + 0xff, }, { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 29, - .end = 29, + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 33, + .end = 33, }, { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x04000000, - .end = 0x04ffffff, + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x0c000000, + .end = 0x0cffffff, }, { - .name = "devirq", - .flags = IORESOURCE_IRQ, - .start = 80, - .end = 111, + .name = "devirq", + .flags = IORESOURCE_IRQ, + .start = 112, + .end = 143, }, }; -static struct resource vlynq_high_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_VLYNQ1, - .end = AR7_REGS_VLYNQ1 + 0xff, +static struct plat_vlynq_data vlynq_low_data = { + .ops = { + .on = vlynq_on, + .off = vlynq_off, }, - { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 33, - .end = 33, + .reset_bit = 20, + .gpio_bit = 18, +}; + +static struct plat_vlynq_data vlynq_high_data = { + .ops = { + .on = vlynq_on, + .off = vlynq_off, }, - { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x0c000000, - .end = 0x0cffffff, + .reset_bit = 26, + .gpio_bit = 19, +}; + +static struct platform_device vlynq_low = { + .id = 0, + .name = "vlynq", + .dev = { + .platform_data = &vlynq_low_data, }, - { - .name = "devirq", - .flags = IORESOURCE_IRQ, - .start = 112, - .end = 143, + .resource = vlynq_low_res, + .num_resources = ARRAY_SIZE(vlynq_low_res), +}; + +static struct platform_device vlynq_high = { + .id = 1, + .name = "vlynq", + .dev = { + .platform_data = &vlynq_high_data, }, + .resource = vlynq_high_res, + .num_resources = ARRAY_SIZE(vlynq_high_res), }; -static struct resource usb_res[] = { - { - .name = "regs", - .flags = IORESOURCE_MEM, - .start = AR7_REGS_USB, - .end = AR7_REGS_USB + 0xff, +/***************************************************************************** + * Flash + ****************************************************************************/ +static struct resource physmap_flash_resource = { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x10000000, + .end = 0x107fffff, +}; + +static struct physmap_flash_data physmap_flash_data = { + .width = 2, +}; + +static struct platform_device physmap_flash = { + .name = "physmap-flash", + .dev = { + .platform_data = &physmap_flash_data, }, + .resource = &physmap_flash_resource, + .num_resources = 1, +}; + +/***************************************************************************** + * Ethernet + ****************************************************************************/ +static struct resource cpmac_low_res[] = { { - .name = "irq", - .flags = IORESOURCE_IRQ, - .start = 32, - .end = 32, + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC0, + .end = AR7_REGS_MAC0 + 0x7ff, }, { - .name = "mem", - .flags = IORESOURCE_MEM, - .start = 0x03400000, - .end = 0x03401fff, + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 27, + .end = 27, }, }; -static struct physmap_flash_data physmap_flash_data = { - .width = 2, +static struct resource cpmac_high_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_MAC1, + .end = AR7_REGS_MAC1 + 0x7ff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 41, + .end = 41, + }, }; static struct fixed_phy_status fixed_phy_status __initdata = { - .link = 1, - .speed = 100, - .duplex = 1, + .link = 1, + .speed = 100, + .duplex = 1, }; static struct plat_cpmac_data cpmac_low_data = { - .reset_bit = 17, - .power_bit = 20, - .phy_mask = 0x80000000, + .reset_bit = 17, + .power_bit = 20, + .phy_mask = 0x80000000, }; static struct plat_cpmac_data cpmac_high_data = { - .reset_bit = 21, - .power_bit = 22, - .phy_mask = 0x7fffffff, -}; - -static struct plat_vlynq_data vlynq_low_data = { - .ops.on = vlynq_on, - .ops.off = vlynq_off, - .reset_bit = 20, - .gpio_bit = 18, -}; - -static struct plat_vlynq_data vlynq_high_data = { - .ops.on = vlynq_on, - .ops.off = vlynq_off, - .reset_bit = 16, - .gpio_bit = 19, -}; - -static struct platform_device physmap_flash = { - .id = 0, - .name = "physmap-flash", - .dev.platform_data = &physmap_flash_data, - .resource = &physmap_flash_resource, - .num_resources = 1, + .reset_bit = 21, + .power_bit = 22, + .phy_mask = 0x7fffffff, }; static u64 cpmac_dma_mask = DMA_BIT_MASK(32); + static struct platform_device cpmac_low = { - .id = 0, - .name = "cpmac", + .id = 0, + .name = "cpmac", .dev = { - .dma_mask = &cpmac_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &cpmac_low_data, + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cpmac_low_data, }, - .resource = cpmac_low_res, - .num_resources = ARRAY_SIZE(cpmac_low_res), + .resource = cpmac_low_res, + .num_resources = ARRAY_SIZE(cpmac_low_res), }; static struct platform_device cpmac_high = { - .id = 1, - .name = "cpmac", + .id = 1, + .name = "cpmac", .dev = { - .dma_mask = &cpmac_dma_mask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &cpmac_high_data, + .dma_mask = &cpmac_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &cpmac_high_data, }, - .resource = cpmac_high_res, - .num_resources = ARRAY_SIZE(cpmac_high_res), + .resource = cpmac_high_res, + .num_resources = ARRAY_SIZE(cpmac_high_res), }; -static struct platform_device vlynq_low = { - .id = 0, - .name = "vlynq", - .dev.platform_data = &vlynq_low_data, - .resource = vlynq_low_res, - .num_resources = ARRAY_SIZE(vlynq_low_res), -}; +static inline unsigned char char2hex(char h) +{ + switch (h) { + case '0': case '1': case '2': case '3': case '4': + case '5': case '6': case '7': case '8': case '9': + return h - '0'; + case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': + return h - 'A' + 10; + case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': + return h - 'a' + 10; + default: + return 0; + } +} -static struct platform_device vlynq_high = { - .id = 1, - .name = "vlynq", - .dev.platform_data = &vlynq_high_data, - .resource = vlynq_high_res, - .num_resources = ARRAY_SIZE(vlynq_high_res), +static void cpmac_get_mac(int instance, unsigned char *dev_addr) +{ + int i; + char name[5], default_mac[ETH_ALEN], *mac; + + mac = NULL; + sprintf(name, "mac%c", 'a' + instance); + mac = prom_getenv(name); + if (!mac) { + sprintf(name, "mac%c", 'a'); + mac = prom_getenv(name); + } + if (!mac) { + random_ether_addr(default_mac); + mac = default_mac; + } + for (i = 0; i < 6; i++) + dev_addr[i] = (char2hex(mac[i * 3]) << 4) + + char2hex(mac[i * 3 + 1]); +} + +/***************************************************************************** + * USB + ****************************************************************************/ +static struct resource usb_res[] = { + { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = AR7_REGS_USB, + .end = AR7_REGS_USB + 0xff, + }, + { + .name = "irq", + .flags = IORESOURCE_IRQ, + .start = 32, + .end = 32, + }, + { + .name = "mem", + .flags = IORESOURCE_MEM, + .start = 0x03400000, + .end = 0x03401fff, + }, }; +static struct platform_device ar7_udc = { + .name = "ar7_udc", + .resource = usb_res, + .num_resources = ARRAY_SIZE(usb_res), +}; +/***************************************************************************** + * LEDs + ****************************************************************************/ static struct gpio_led default_leds[] = { { - .name = "status", - .gpio = 8, - .active_low = 1, + .name = "status", + .gpio = 8, + .active_low = 1, }, }; static struct gpio_led dsl502t_leds[] = { { - .name = "status", - .gpio = 9, - .active_low = 1, + .name = "status", + .gpio = 9, + .active_low = 1, }, { - .name = "ethernet", - .gpio = 7, - .active_low = 1, + .name = "ethernet", + .gpio = 7, + .active_low = 1, }, { - .name = "usb", - .gpio = 12, - .active_low = 1, + .name = "usb", + .gpio = 12, + .active_low = 1, }, }; static struct gpio_led dg834g_leds[] = { { - .name = "ppp", - .gpio = 6, - .active_low = 1, + .name = "ppp", + .gpio = 6, + .active_low = 1, }, { - .name = "status", - .gpio = 7, - .active_low = 1, + .name = "status", + .gpio = 7, + .active_low = 1, }, { - .name = "adsl", - .gpio = 8, - .active_low = 1, + .name = "adsl", + .gpio = 8, + .active_low = 1, }, { - .name = "wifi", - .gpio = 12, - .active_low = 1, + .name = "wifi", + .gpio = 12, + .active_low = 1, }, { - .name = "power", - .gpio = 14, - .active_low = 1, - .default_trigger = "default-on", + .name = "power", + .gpio = 14, + .active_low = 1, + .default_trigger = "default-on", }, }; static struct gpio_led fb_sl_leds[] = { { - .name = "1", - .gpio = 7, + .name = "1", + .gpio = 7, }, { - .name = "2", - .gpio = 13, - .active_low = 1, + .name = "2", + .gpio = 13, + .active_low = 1, }, { - .name = "3", - .gpio = 10, - .active_low = 1, + .name = "3", + .gpio = 10, + .active_low = 1, }, { - .name = "4", - .gpio = 12, - .active_low = 1, + .name = "4", + .gpio = 12, + .active_low = 1, }, { - .name = "5", - .gpio = 9, - .active_low = 1, + .name = "5", + .gpio = 9, + .active_low = 1, }, }; static struct gpio_led fb_fon_leds[] = { { - .name = "1", - .gpio = 8, + .name = "1", + .gpio = 8, }, { - .name = "2", - .gpio = 3, - .active_low = 1, + .name = "2", + .gpio = 3, + .active_low = 1, }, { - .name = "3", - .gpio = 5, + .name = "3", + .gpio = 5, }, { - .name = "4", - .gpio = 4, - .active_low = 1, + .name = "4", + .gpio = 4, + .active_low = 1, }, { - .name = "5", - .gpio = 11, - .active_low = 1, + .name = "5", + .gpio = 11, + .active_low = 1, }, }; @@ -404,69 +473,11 @@ static struct gpio_led_platform_data ar7_led_data; static struct platform_device ar7_gpio_leds = { .name = "leds-gpio", - .id = -1, .dev = { .platform_data = &ar7_led_data, } }; -static struct platform_device ar7_udc = { - .id = -1, - .name = "ar7_udc", - .resource = usb_res, - .num_resources = ARRAY_SIZE(usb_res), -}; - -static struct resource ar7_wdt_res = { - .name = "regs", - .start = -1, /* Filled at runtime */ - .end = -1, /* Filled at runtime */ - .flags = IORESOURCE_MEM, -}; - -static struct platform_device ar7_wdt = { - .id = -1, - .name = "ar7_wdt", - .resource = &ar7_wdt_res, - .num_resources = 1, -}; - -static inline unsigned char char2hex(char h) -{ - switch (h) { - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - return h - '0'; - case 'A': case 'B': case 'C': case 'D': case 'E': case 'F': - return h - 'A' + 10; - case 'a': case 'b': case 'c': case 'd': case 'e': case 'f': - return h - 'a' + 10; - default: - return 0; - } -} - -static void cpmac_get_mac(int instance, unsigned char *dev_addr) -{ - int i; - char name[5], default_mac[ETH_ALEN], *mac; - - mac = NULL; - sprintf(name, "mac%c", 'a' + instance); - mac = prom_getenv(name); - if (!mac) { - sprintf(name, "mac%c", 'a'); - mac = prom_getenv(name); - } - if (!mac) { - random_ether_addr(default_mac); - mac = default_mac; - } - for (i = 0; i < 6; i++) - dev_addr[i] = (char2hex(mac[i * 3]) << 4) + - char2hex(mac[i * 3 + 1]); -} - static void __init detect_leds(void) { char *prid, *usb_prod; @@ -499,111 +510,149 @@ static void __init detect_leds(void) } } -static int __init ar7_register_devices(void) +/***************************************************************************** + * Watchdog + ****************************************************************************/ +static struct resource ar7_wdt_res = { + .name = "regs", + .flags = IORESOURCE_MEM, + .start = -1, /* Filled at runtime */ + .end = -1, /* Filled at runtime */ +}; + +static struct platform_device ar7_wdt = { + .name = "ar7_wdt", + .resource = &ar7_wdt_res, + .num_resources = 1, +}; + +/***************************************************************************** + * Init + ****************************************************************************/ +static int __init ar7_register_uarts(void) { - u16 chip_id; - int res; - u32 *bootcr, val; #ifdef CONFIG_SERIAL_8250 - static struct uart_port uart_port[2] __initdata; - - memset(uart_port, 0, sizeof(struct uart_port) * 2); - - uart_port[0].type = PORT_16550A; - uart_port[0].line = 0; - uart_port[0].irq = AR7_IRQ_UART0; - uart_port[0].uartclk = ar7_bus_freq() / 2; - uart_port[0].iotype = UPIO_MEM32; - uart_port[0].mapbase = AR7_REGS_UART0; - uart_port[0].membase = ioremap(uart_port[0].mapbase, 256); - uart_port[0].regshift = 2; - res = early_serial_setup(&uart_port[0]); + static struct uart_port uart_port __initdata; + struct clk *bus_clk; + int res; + + memset(&uart_port, 0, sizeof(struct uart_port)); + + bus_clk = clk_get(NULL, "bus"); + if (IS_ERR(bus_clk)) + panic("unable to get bus clk\n"); + + uart_port.type = PORT_16550A; + uart_port.uartclk = clk_get_rate(bus_clk) / 2; + uart_port.iotype = UPIO_MEM32; + uart_port.regshift = 2; + + uart_port.line = 0; + uart_port.irq = AR7_IRQ_UART0; + uart_port.mapbase = AR7_REGS_UART0; + uart_port.membase = ioremap(uart_port.mapbase, 256); + + res = early_serial_setup(&uart_port); if (res) return res; - /* Only TNETD73xx have a second serial port */ if (ar7_has_second_uart()) { - uart_port[1].type = PORT_16550A; - uart_port[1].line = 1; - uart_port[1].irq = AR7_IRQ_UART1; - uart_port[1].uartclk = ar7_bus_freq() / 2; - uart_port[1].iotype = UPIO_MEM32; - uart_port[1].mapbase = UR8_REGS_UART1; - uart_port[1].membase = ioremap(uart_port[1].mapbase, 256); - uart_port[1].regshift = 2; - res = early_serial_setup(&uart_port[1]); + uart_port.line = 1; + uart_port.irq = AR7_IRQ_UART1; + uart_port.mapbase = UR8_REGS_UART1; + uart_port.membase = ioremap(uart_port.mapbase, 256); + + res = early_serial_setup(&uart_port); if (res) return res; } -#endif /* CONFIG_SERIAL_8250 */ +#endif + + return 0; +} + +static int __init ar7_register_devices(void) +{ + void __iomem *bootcr; + u32 val; + u16 chip_id; + int res; + + res = ar7_register_uarts(); + if (res) + pr_err("unable to setup uart(s): %d\n", res); + res = platform_device_register(&physmap_flash); if (res) - return res; + pr_warning("unable to register physmap-flash: %d\n", res); ar7_device_disable(vlynq_low_data.reset_bit); res = platform_device_register(&vlynq_low); if (res) - return res; + pr_warning("unable to register vlynq-low: %d\n", res); if (ar7_has_high_vlynq()) { ar7_device_disable(vlynq_high_data.reset_bit); res = platform_device_register(&vlynq_high); if (res) - return res; + pr_warning("unable to register vlynq-high: %d\n", res); } if (ar7_has_high_cpmac()) { - res = fixed_phy_add(PHY_POLL, cpmac_high.id, &fixed_phy_status); - if (res && res != -ENODEV) - return res; - cpmac_get_mac(1, cpmac_high_data.dev_addr); - res = platform_device_register(&cpmac_high); - if (res) - return res; - } else { + if (!res) { + cpmac_get_mac(1, cpmac_high_data.dev_addr); + + res = platform_device_register(&cpmac_high); + if (res) + pr_warning("unable to register cpmac-high: %d\n", res); + } else + pr_warning("unable to add cpmac-high phy: %d\n", res); + } else cpmac_low_data.phy_mask = 0xffffffff; - } res = fixed_phy_add(PHY_POLL, cpmac_low.id, &fixed_phy_status); - if (res && res != -ENODEV) - return res; - - cpmac_get_mac(0, cpmac_low_data.dev_addr); - res = platform_device_register(&cpmac_low); - if (res) - return res; + if (!res) { + cpmac_get_mac(0, cpmac_low_data.dev_addr); + res = platform_device_register(&cpmac_low); + if (res) + pr_warning("unable to register cpmac-low: %d\n", res); + } else + pr_warning("unable to add cpmac-low phy: %d\n", res); detect_leds(); res = platform_device_register(&ar7_gpio_leds); if (res) - return res; + pr_warning("unable to register leds: %d\n", res); res = platform_device_register(&ar7_udc); - - chip_id = ar7_chip_id(); - switch (chip_id) { - case AR7_CHIP_7100: - case AR7_CHIP_7200: - ar7_wdt_res.start = AR7_REGS_WDT; - break; - case AR7_CHIP_7300: - ar7_wdt_res.start = UR8_REGS_WDT; - break; - default: - break; - } - - ar7_wdt_res.end = ar7_wdt_res.start + 0x20; - - bootcr = (u32 *)ioremap_nocache(AR7_REGS_DCL, 4); - val = *bootcr; - iounmap(bootcr); + if (res) + pr_warning("unable to register usb slave: %d\n", res); /* Register watchdog only if enabled in hardware */ - if (val & AR7_WDT_HW_ENA) + bootcr = ioremap_nocache(AR7_REGS_DCL, 4); + val = readl(bootcr); + iounmap(bootcr); + if (val & AR7_WDT_HW_ENA) { + chip_id = ar7_chip_id(); + switch (chip_id) { + case AR7_CHIP_7100: + case AR7_CHIP_7200: + ar7_wdt_res.start = AR7_REGS_WDT; + break; + case AR7_CHIP_7300: + ar7_wdt_res.start = UR8_REGS_WDT; + break; + default: + break; + } + + ar7_wdt_res.end = ar7_wdt_res.start + 0x20; res = platform_device_register(&ar7_wdt); + if (res) + pr_warning("unable to register watchdog: %d\n", res); + } - return res; + return 0; } arch_initcall(ar7_register_devices); diff --git a/arch/mips/ar7/prom.c b/arch/mips/ar7/prom.c index c1fdd368281..52385790e5c 100644 --- a/arch/mips/ar7/prom.c +++ b/arch/mips/ar7/prom.c @@ -32,8 +32,8 @@ #define MAX_ENTRY 80 struct env_var { - char *name; - char *value; + char *name; + char *value; }; static struct env_var adam2_env[MAX_ENTRY]; @@ -41,6 +41,7 @@ static struct env_var adam2_env[MAX_ENTRY]; char *prom_getenv(const char *name) { int i; + for (i = 0; (i < MAX_ENTRY) && adam2_env[i].name; i++) if (!strcmp(name, adam2_env[i].name)) return adam2_env[i].value; @@ -49,65 +50,50 @@ char *prom_getenv(const char *name) } EXPORT_SYMBOL(prom_getenv); -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - static void __init ar7_init_cmdline(int argc, char *argv[]) { - char *cp; - int actr; - - actr = 1; /* Always ignore argv[0] */ + int i; - cp = &(arcs_cmdline[0]); - while (actr < argc) { - strcpy(cp, argv[actr]); - cp += strlen(argv[actr]); - *cp++ = ' '; - actr++; - } - if (cp != &(arcs_cmdline[0])) { - /* get rid of trailing space */ - --cp; - *cp = '\0'; + for (i = 1; i < argc; i++) { + strlcat(arcs_cmdline, argv[i], COMMAND_LINE_SIZE); + if (i < (argc - 1)) + strlcat(arcs_cmdline, " ", COMMAND_LINE_SIZE); } } struct psbl_rec { - u32 psbl_size; - u32 env_base; - u32 env_size; - u32 ffs_base; - u32 ffs_size; + u32 psbl_size; + u32 env_base; + u32 env_size; + u32 ffs_base; + u32 ffs_size; }; static __initdata char psp_env_version[] = "TIENV0.8"; struct psp_env_chunk { - u8 num; - u8 ctrl; - u16 csum; - u8 len; - char data[11]; + u8 num; + u8 ctrl; + u16 csum; + u8 len; + char data[11]; } __attribute__ ((packed)); struct psp_var_map_entry { - u8 num; - char *value; + u8 num; + char *value; }; static struct psp_var_map_entry psp_var_map[] = { - { 1, "cpufrequency" }, - { 2, "memsize" }, - { 3, "flashsize" }, - { 4, "modetty0" }, - { 5, "modetty1" }, - { 8, "maca" }, - { 9, "macb" }, - { 28, "sysfrequency" }, - { 38, "mipsfrequency" }, + { 1, "cpufrequency" }, + { 2, "memsize" }, + { 3, "flashsize" }, + { 4, "modetty0" }, + { 5, "modetty1" }, + { 8, "maca" }, + { 9, "macb" }, + { 28, "sysfrequency" }, + { 38, "mipsfrequency" }, }; /* @@ -154,6 +140,7 @@ static char * __init lookup_psp_var_map(u8 num) static void __init add_adam2_var(char *name, char *value) { int i; + for (i = 0; i < MAX_ENTRY; i++) { if (!adam2_env[i].name) { adam2_env[i].name = name; @@ -216,7 +203,7 @@ static void __init console_config(void) char parity = '\0', bits = '\0', flow = '\0'; char *s, *p; - if (strstr(prom_getcmdline(), "console=")) + if (strstr(arcs_cmdline, "console=")) return; s = prom_getenv("modetty0"); @@ -250,7 +237,7 @@ static void __init console_config(void) else sprintf(console_string, " console=ttyS0,%d%c%c", baud, parity, bits); - strcat(prom_getcmdline(), console_string); + strlcat(arcs_cmdline, console_string, COMMAND_LINE_SIZE); #endif } @@ -279,4 +266,3 @@ int prom_putchar(char c) serial_out(UART_TX, c); return 1; } - diff --git a/arch/mips/ar7/setup.c b/arch/mips/ar7/setup.c index 39f6b5b9646..3a801d2cb6e 100644 --- a/arch/mips/ar7/setup.c +++ b/arch/mips/ar7/setup.c @@ -26,8 +26,8 @@ static void ar7_machine_restart(char *command) { - u32 *softres_reg = ioremap(AR7_REGS_RESET + - AR7_RESET_SOFTWARE, 1); + u32 *softres_reg = ioremap(AR7_REGS_RESET + AR7_RESET_SOFTWARE, 1); + writel(1, softres_reg); } @@ -41,6 +41,7 @@ static void ar7_machine_power_off(void) { u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1); u32 power_state = readl(power_reg) | (3 << 30); + writel(power_state, power_reg); ar7_machine_halt(); } @@ -49,14 +50,14 @@ const char *get_system_type(void) { u16 chip_id = ar7_chip_id(); switch (chip_id) { - case AR7_CHIP_7300: - return "TI AR7 (TNETD7300)"; case AR7_CHIP_7100: return "TI AR7 (TNETD7100)"; case AR7_CHIP_7200: return "TI AR7 (TNETD7200)"; + case AR7_CHIP_7300: + return "TI AR7 (TNETD7300)"; default: - return "TI AR7 (Unknown)"; + return "TI AR7 (unknown)"; } } @@ -70,7 +71,6 @@ console_initcall(ar7_init_console); * Initializes basic routines and structures pointers, memory size (as * given by the bios and saves the command line. */ - void __init plat_mem_setup(void) { unsigned long io_base; @@ -88,6 +88,5 @@ void __init plat_mem_setup(void) prom_meminit(); printk(KERN_INFO "%s, ID: 0x%04x, Revision: 0x%02x\n", - get_system_type(), - ar7_chip_id(), ar7_chip_rev()); + get_system_type(), ar7_chip_id(), ar7_chip_rev()); } diff --git a/arch/mips/ar7/time.c b/arch/mips/ar7/time.c index a1fba894daa..5fb8a013408 100644 --- a/arch/mips/ar7/time.c +++ b/arch/mips/ar7/time.c @@ -20,11 +20,21 @@ #include <linux/init.h> #include <linux/time.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/time.h> #include <asm/mach-ar7/ar7.h> void __init plat_time_init(void) { - mips_hpt_frequency = ar7_cpu_freq() / 2; + struct clk *cpu_clk; + + cpu_clk = clk_get(NULL, "cpu"); + if (IS_ERR(cpu_clk)) { + printk(KERN_ERR "unable to get cpu clock\n"); + return; + } + + mips_hpt_frequency = clk_get_rate(cpu_clk) / 2; } diff --git a/arch/mips/bcm47xx/gpio.c b/arch/mips/bcm47xx/gpio.c index 9b798800258..e4a5ee9c972 100644 --- a/arch/mips/bcm47xx/gpio.c +++ b/arch/mips/bcm47xx/gpio.c @@ -59,4 +59,3 @@ int gpio_to_irq(unsigned gpio) return -EINVAL; } EXPORT_SYMBOL_GPL(gpio_to_irq); - diff --git a/arch/mips/bcm47xx/prom.c b/arch/mips/bcm47xx/prom.c index 29d3cbf9555..0fa646c5a84 100644 --- a/arch/mips/bcm47xx/prom.c +++ b/arch/mips/bcm47xx/prom.c @@ -163,4 +163,3 @@ void __init prom_init(void) void __init prom_free_prom_memory(void) { } - diff --git a/arch/mips/bcm47xx/setup.c b/arch/mips/bcm47xx/setup.c index 2f580fa160c..d442e11625f 100644 --- a/arch/mips/bcm47xx/setup.c +++ b/arch/mips/bcm47xx/setup.c @@ -121,4 +121,3 @@ void __init plat_mem_setup(void) _machine_halt = bcm47xx_machine_halt; pm_power_off = bcm47xx_machine_halt; } - diff --git a/arch/mips/bcm47xx/wgt634u.c b/arch/mips/bcm47xx/wgt634u.c index ef00e7f58c2..74d06965326 100644 --- a/arch/mips/bcm47xx/wgt634u.c +++ b/arch/mips/bcm47xx/wgt634u.c @@ -164,4 +164,3 @@ static int __init wgt634u_init(void) } module_init(wgt634u_init); - diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c index 1fe412c4317..ea17941168c 100644 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -836,4 +836,3 @@ int __init board_register_devices(void) return 0; } - diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c index ba522bdcde4..5f113598156 100644 --- a/arch/mips/bcm63xx/timer.c +++ b/arch/mips/bcm63xx/timer.c @@ -17,8 +17,8 @@ #include <bcm63xx_timer.h> #include <bcm63xx_regs.h> -static DEFINE_SPINLOCK(timer_reg_lock); -static DEFINE_SPINLOCK(timer_data_lock); +static DEFINE_RAW_SPINLOCK(timer_reg_lock); +static DEFINE_RAW_SPINLOCK(timer_data_lock); static struct clk *periph_clk; static struct timer_data { @@ -31,23 +31,23 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) u32 stat; int i; - spin_lock(&timer_reg_lock); + raw_spin_lock(&timer_reg_lock); stat = bcm_timer_readl(TIMER_IRQSTAT_REG); bcm_timer_writel(stat, TIMER_IRQSTAT_REG); - spin_unlock(&timer_reg_lock); + raw_spin_unlock(&timer_reg_lock); for (i = 0; i < BCM63XX_TIMER_COUNT; i++) { if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i))) continue; - spin_lock(&timer_data_lock); + raw_spin_lock(&timer_data_lock); if (!timer_data[i].cb) { - spin_unlock(&timer_data_lock); + raw_spin_unlock(&timer_data_lock); continue; } timer_data[i].cb(timer_data[i].data); - spin_unlock(&timer_data_lock); + raw_spin_unlock(&timer_data_lock); } return IRQ_HANDLED; @@ -61,7 +61,7 @@ int bcm63xx_timer_enable(int id) if (id >= BCM63XX_TIMER_COUNT) return -EINVAL; - spin_lock_irqsave(&timer_reg_lock, flags); + raw_spin_lock_irqsave(&timer_reg_lock, flags); reg = bcm_timer_readl(TIMER_CTLx_REG(id)); reg |= TIMER_CTL_ENABLE_MASK; @@ -71,7 +71,7 @@ int bcm63xx_timer_enable(int id) reg |= TIMER_IRQSTAT_TIMER_IR_EN(id); bcm_timer_writel(reg, TIMER_IRQSTAT_REG); - spin_unlock_irqrestore(&timer_reg_lock, flags); + raw_spin_unlock_irqrestore(&timer_reg_lock, flags); return 0; } @@ -85,7 +85,7 @@ int bcm63xx_timer_disable(int id) if (id >= BCM63XX_TIMER_COUNT) return -EINVAL; - spin_lock_irqsave(&timer_reg_lock, flags); + raw_spin_lock_irqsave(&timer_reg_lock, flags); reg = bcm_timer_readl(TIMER_CTLx_REG(id)); reg &= ~TIMER_CTL_ENABLE_MASK; @@ -95,7 +95,7 @@ int bcm63xx_timer_disable(int id) reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id); bcm_timer_writel(reg, TIMER_IRQSTAT_REG); - spin_unlock_irqrestore(&timer_reg_lock, flags); + raw_spin_unlock_irqrestore(&timer_reg_lock, flags); return 0; } @@ -110,7 +110,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) return -EINVAL; ret = 0; - spin_lock_irqsave(&timer_data_lock, flags); + raw_spin_lock_irqsave(&timer_data_lock, flags); if (timer_data[id].cb) { ret = -EBUSY; goto out; @@ -120,7 +120,7 @@ int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) timer_data[id].data = data; out: - spin_unlock_irqrestore(&timer_data_lock, flags); + raw_spin_unlock_irqrestore(&timer_data_lock, flags); return ret; } @@ -133,9 +133,9 @@ void bcm63xx_timer_unregister(int id) if (id >= BCM63XX_TIMER_COUNT) return; - spin_lock_irqsave(&timer_data_lock, flags); + raw_spin_lock_irqsave(&timer_data_lock, flags); timer_data[id].cb = NULL; - spin_unlock_irqrestore(&timer_data_lock, flags); + raw_spin_unlock_irqrestore(&timer_data_lock, flags); } EXPORT_SYMBOL(bcm63xx_timer_unregister); @@ -159,7 +159,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) if (countdown & ~TIMER_CTL_COUNTDOWN_MASK) return -EINVAL; - spin_lock_irqsave(&timer_reg_lock, flags); + raw_spin_lock_irqsave(&timer_reg_lock, flags); reg = bcm_timer_readl(TIMER_CTLx_REG(id)); if (monotonic) @@ -171,7 +171,7 @@ int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) reg |= countdown; bcm_timer_writel(reg, TIMER_CTLx_REG(id)); - spin_unlock_irqrestore(&timer_reg_lock, flags); + raw_spin_unlock_irqrestore(&timer_reg_lock, flags); return 0; } diff --git a/arch/mips/boot/compressed/Makefile b/arch/mips/boot/compressed/Makefile index 9df903d714d..790ddd39762 100644 --- a/arch/mips/boot/compressed/Makefile +++ b/arch/mips/boot/compressed/Makefile @@ -9,7 +9,7 @@ # modified by Cort (cort@cs.nmt.edu) # # Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University -# Author: Wu Zhangjin <wuzj@lemote.com> +# Author: Wu Zhangjin <wuzhangjin@gmail.com> # # compressed kernel load addr: VMLINUZ_LOAD_ADDRESS > VMLINUX_LOAD_ADDRESS + VMLINUX_SIZE @@ -27,15 +27,18 @@ BOOT_HEAP_SIZE := 0x400000 KBUILD_CFLAGS := $(shell echo $(KBUILD_CFLAGS) | sed -e "s/-pg//") KBUILD_CFLAGS := $(LINUXINCLUDE) $(KBUILD_CFLAGS) -D__KERNEL__ \ - -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" \ + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) -D"VMLINUX_LOAD_ADDRESS_ULL=$(VMLINUX_LOAD_ADDRESS)ull" KBUILD_AFLAGS := $(LINUXINCLUDE) $(KBUILD_AFLAGS) -D__ASSEMBLY__ \ - -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) \ - -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) + -DBOOT_HEAP_SIZE=$(BOOT_HEAP_SIZE) \ + -DKERNEL_ENTRY=0x$(shell $(NM) $(objtree)/$(KBUILD_IMAGE) 2>/dev/null | grep " kernel_entry" | cut -f1 -d \ ) obj-y := $(obj)/head.o $(obj)/decompress.o $(obj)/dbg.o +ifdef CONFIG_DEBUG_ZBOOT obj-$(CONFIG_SYS_SUPPORTS_ZBOOT_UART16550) += $(obj)/uart-16550.o +obj-$(CONFIG_MACH_ALCHEMY) += $(obj)/uart-alchemy.o +endif OBJCOPYFLAGS_vmlinux.bin := $(OBJCOPYFLAGS) -O binary -R .comment -S $(obj)/vmlinux.bin: $(KBUILD_IMAGE) diff --git a/arch/mips/boot/compressed/dbg.c b/arch/mips/boot/compressed/dbg.c index ff4dc7a33a9..134a6162e39 100644 --- a/arch/mips/boot/compressed/dbg.c +++ b/arch/mips/boot/compressed/dbg.c @@ -5,11 +5,11 @@ * please select SYS_SUPPORTS_ZBOOT_UART16550 for your machine. othewise, you * need to implement your own putc(). */ - +#include <linux/compiler.h> #include <linux/init.h> #include <linux/types.h> -void __attribute__ ((weak)) putc(char c) +void __weak putc(char c) { } diff --git a/arch/mips/boot/compressed/decompress.c b/arch/mips/boot/compressed/decompress.c index 55d02b3a671..5db43c58b1b 100644 --- a/arch/mips/boot/compressed/decompress.c +++ b/arch/mips/boot/compressed/decompress.c @@ -5,8 +5,8 @@ * Author: Matt Porter <mporter@mvista.com> Derived from * arch/ppc/boot/prep/misc.c * - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology - * Author: Wu Zhangjin <wuzj@lemote.com> + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/boot/compressed/uart-alchemy.c b/arch/mips/boot/compressed/uart-alchemy.c new file mode 100644 index 00000000000..1bff22fa089 --- /dev/null +++ b/arch/mips/boot/compressed/uart-alchemy.c @@ -0,0 +1,7 @@ +#include <asm/mach-au1x00/au1000.h> + +void putc(char c) +{ + /* all current (Jan. 2010) in-kernel boards */ + alchemy_uart_putchar(UART0_PHYS_ADDR, c); +} diff --git a/arch/mips/cavium-octeon/dma-octeon.c b/arch/mips/cavium-octeon/dma-octeon.c index 4b92bfc662d..be531ec1f20 100644 --- a/arch/mips/cavium-octeon/dma-octeon.c +++ b/arch/mips/cavium-octeon/dma-octeon.c @@ -41,7 +41,7 @@ struct bar1_index_state { }; #ifdef CONFIG_PCI -static DEFINE_SPINLOCK(bar1_lock); +static DEFINE_RAW_SPINLOCK(bar1_lock); static struct bar1_index_state bar1_state[32]; #endif @@ -198,7 +198,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) start_index = 31; /* Only one processor can access the Bar register at once */ - spin_lock_irqsave(&bar1_lock, flags); + raw_spin_lock_irqsave(&bar1_lock, flags); /* Look through Bar1 for existing mapping that will work */ for (index = start_index; index >= 0; index--) { @@ -250,7 +250,7 @@ dma_addr_t octeon_map_dma_mem(struct device *dev, void *ptr, size_t size) (unsigned long long) physical); done_unlock: - spin_unlock_irqrestore(&bar1_lock, flags); + raw_spin_unlock_irqrestore(&bar1_lock, flags); done: pr_debug("dma_map_single 0x%llx->0x%llx\n", physical, result); return result; @@ -324,14 +324,14 @@ void octeon_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr) "Attempt to unmap an invalid address (0x%llx)\n", dma_addr); - spin_lock_irqsave(&bar1_lock, flags); + raw_spin_lock_irqsave(&bar1_lock, flags); bar1_state[index].ref_count--; if (bar1_state[index].ref_count == 0) octeon_npi_write32(CVMX_NPI_PCI_BAR1_INDEXX(index), 0); else if (unlikely(bar1_state[index].ref_count < 0)) panic("dma_unmap_single: Bar1[%u] reference count < 0\n", (int) index); - spin_unlock_irqrestore(&bar1_lock, flags); + raw_spin_unlock_irqrestore(&bar1_lock, flags); done: pr_debug("dma_unmap_single 0x%llx\n", dma_addr); return; diff --git a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c index 25666da17b2..fdf5f19bfdb 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-bootmem.c +++ b/arch/mips/cavium-octeon/executive/cvmx-bootmem.c @@ -253,7 +253,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, * impossible requests up front. (NOP for address_min == 0) */ if (alignment) - address_min = __ALIGN_MASK(address_min, (alignment - 1)); + address_min = ALIGN(address_min, alignment); /* * Reject inconsistent args. We have adjusted these, so this @@ -291,7 +291,7 @@ int64_t cvmx_bootmem_phy_alloc(uint64_t req_size, uint64_t address_min, * satisfy request. */ usable_base = - __ALIGN_MASK(max(address_min, ent_addr), alignment - 1); + ALIGN(max(address_min, ent_addr), alignment); usable_max = min(address_max, ent_addr + ent_size); /* * We should be able to allocate block at address @@ -671,7 +671,7 @@ int64_t cvmx_bootmem_phy_named_block_alloc(uint64_t size, uint64_t min_addr, * coallesced when they are freed. The alloc routine does the * same rounding up on all allocations. */ - size = __ALIGN_MASK(size, (CVMX_BOOTMEM_ALIGNMENT_SIZE - 1)); + size = ALIGN(size, CVMX_BOOTMEM_ALIGNMENT_SIZE); addr_allocated = cvmx_bootmem_phy_alloc(size, min_addr, max_addr, alignment, diff --git a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c index e5838890cba..8b18a20cc7b 100644 --- a/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c +++ b/arch/mips/cavium-octeon/executive/cvmx-sysinfo.c @@ -115,4 +115,3 @@ int cvmx_sysinfo_minimal_initialize(void *phy_mem_desc_ptr, return 1; } - diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 6f2acf09328..c424cd158dc 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -13,9 +13,8 @@ #include <asm/octeon/cvmx-pexp-defs.h> #include <asm/octeon/cvmx-npi-defs.h> -DEFINE_RWLOCK(octeon_irq_ciu0_rwlock); -DEFINE_RWLOCK(octeon_irq_ciu1_rwlock); -DEFINE_SPINLOCK(octeon_irq_msi_lock); +static DEFINE_RAW_SPINLOCK(octeon_irq_ciu0_lock); +static DEFINE_RAW_SPINLOCK(octeon_irq_ciu1_lock); static int octeon_coreid_for_cpu(int cpu) { @@ -51,9 +50,6 @@ static void octeon_irq_core_eoi(unsigned int irq) */ if (desc->status & IRQ_DISABLED) return; - - /* There is a race here. We should fix it. */ - /* * We don't need to disable IRQs to make these atomic since * they are already disabled earlier in the low level @@ -141,19 +137,12 @@ static void octeon_irq_ciu0_enable(unsigned int irq) uint64_t en0; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ - /* - * A read lock is used here to make sure only one core is ever - * updating the CIU enable bits at a time. During an enable - * the cores don't interfere with each other. During a disable - * the write lock stops any enables that might cause a - * problem. - */ - read_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags); en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); en0 |= 1ull << bit; cvmx_write_csr(CVMX_CIU_INTX_EN0(coreid * 2), en0); cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); - read_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags); } static void octeon_irq_ciu0_disable(unsigned int irq) @@ -162,7 +151,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq) unsigned long flags; uint64_t en0; int cpu; - write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags); for_each_online_cpu(cpu) { int coreid = octeon_coreid_for_cpu(cpu); en0 = cvmx_read_csr(CVMX_CIU_INTX_EN0(coreid * 2)); @@ -174,7 +163,7 @@ static void octeon_irq_ciu0_disable(unsigned int irq) * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); - write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags); } /* @@ -193,7 +182,7 @@ static void octeon_irq_ciu0_enable_v2(unsigned int irq) * Disable the irq on the current core for chips that have the EN*_W1{S,C} * registers. */ -static void octeon_irq_ciu0_disable_v2(unsigned int irq) +static void octeon_irq_ciu0_ack_v2(unsigned int irq) { int index = cvmx_get_core_num() * 2; u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); @@ -202,6 +191,43 @@ static void octeon_irq_ciu0_disable_v2(unsigned int irq) } /* + * CIU timer type interrupts must be acknoleged by writing a '1' bit + * to their sum0 bit. + */ +static void octeon_irq_ciu0_timer_ack(unsigned int irq) +{ + int index = cvmx_get_core_num() * 2; + uint64_t mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + cvmx_write_csr(CVMX_CIU_INTX_SUM0(index), mask); +} + +static void octeon_irq_ciu0_timer_ack_v1(unsigned int irq) +{ + octeon_irq_ciu0_timer_ack(irq); + octeon_irq_ciu0_ack(irq); +} + +static void octeon_irq_ciu0_timer_ack_v2(unsigned int irq) +{ + octeon_irq_ciu0_timer_ack(irq); + octeon_irq_ciu0_ack_v2(irq); +} + +/* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu0_eoi_v2(unsigned int irq) +{ + struct irq_desc *desc = irq_desc + irq; + int index = cvmx_get_core_num() * 2; + u64 mask = 1ull << (irq - OCTEON_IRQ_WORKQ0); + + if ((desc->status & IRQ_DISABLED) == 0) + cvmx_write_csr(CVMX_CIU_INTX_EN0_W1S(index), mask); +} + +/* * Disable the irq on the all cores for chips that have the EN*_W1{S,C} * registers. */ @@ -223,7 +249,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * unsigned long flags; int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */ - write_lock_irqsave(&octeon_irq_ciu0_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu0_lock, flags); for_each_online_cpu(cpu) { int coreid = octeon_coreid_for_cpu(cpu); uint64_t en0 = @@ -239,7 +265,7 @@ static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask * * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2)); - write_unlock_irqrestore(&octeon_irq_ciu0_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu0_lock, flags); return 0; } @@ -272,8 +298,8 @@ static struct irq_chip octeon_irq_chip_ciu0_v2 = { .name = "CIU0", .enable = octeon_irq_ciu0_enable_v2, .disable = octeon_irq_ciu0_disable_all_v2, - .ack = octeon_irq_ciu0_disable_v2, - .eoi = octeon_irq_ciu0_enable_v2, + .ack = octeon_irq_ciu0_ack_v2, + .eoi = octeon_irq_ciu0_eoi_v2, #ifdef CONFIG_SMP .set_affinity = octeon_irq_ciu0_set_affinity_v2, #endif @@ -290,6 +316,28 @@ static struct irq_chip octeon_irq_chip_ciu0 = { #endif }; +static struct irq_chip octeon_irq_chip_ciu0_timer_v2 = { + .name = "CIU0-T", + .enable = octeon_irq_ciu0_enable_v2, + .disable = octeon_irq_ciu0_disable_all_v2, + .ack = octeon_irq_ciu0_timer_ack_v2, + .eoi = octeon_irq_ciu0_eoi_v2, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu0_set_affinity_v2, +#endif +}; + +static struct irq_chip octeon_irq_chip_ciu0_timer = { + .name = "CIU0-T", + .enable = octeon_irq_ciu0_enable, + .disable = octeon_irq_ciu0_disable, + .ack = octeon_irq_ciu0_timer_ack_v1, + .eoi = octeon_irq_ciu0_eoi, +#ifdef CONFIG_SMP + .set_affinity = octeon_irq_ciu0_set_affinity, +#endif +}; + static void octeon_irq_ciu1_ack(unsigned int irq) { @@ -322,19 +370,12 @@ static void octeon_irq_ciu1_enable(unsigned int irq) uint64_t en1; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ - /* - * A read lock is used here to make sure only one core is ever - * updating the CIU enable bits at a time. During an enable - * the cores don't interfere with each other. During a disable - * the write lock stops any enables that might cause a - * problem. - */ - read_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags); en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); en1 |= 1ull << bit; cvmx_write_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1), en1); cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); - read_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags); } static void octeon_irq_ciu1_disable(unsigned int irq) @@ -343,7 +384,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq) unsigned long flags; uint64_t en1; int cpu; - write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags); for_each_online_cpu(cpu) { int coreid = octeon_coreid_for_cpu(cpu); en1 = cvmx_read_csr(CVMX_CIU_INTX_EN1(coreid * 2 + 1)); @@ -355,7 +396,7 @@ static void octeon_irq_ciu1_disable(unsigned int irq) * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); - write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags); } /* @@ -374,7 +415,7 @@ static void octeon_irq_ciu1_enable_v2(unsigned int irq) * Disable the irq on the current core for chips that have the EN*_W1{S,C} * registers. */ -static void octeon_irq_ciu1_disable_v2(unsigned int irq) +static void octeon_irq_ciu1_ack_v2(unsigned int irq) { int index = cvmx_get_core_num() * 2 + 1; u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); @@ -383,6 +424,20 @@ static void octeon_irq_ciu1_disable_v2(unsigned int irq) } /* + * Enable the irq on the current core for chips that have the EN*_W1{S,C} + * registers. + */ +static void octeon_irq_ciu1_eoi_v2(unsigned int irq) +{ + struct irq_desc *desc = irq_desc + irq; + int index = cvmx_get_core_num() * 2 + 1; + u64 mask = 1ull << (irq - OCTEON_IRQ_WDOG0); + + if ((desc->status & IRQ_DISABLED) == 0) + cvmx_write_csr(CVMX_CIU_INTX_EN1_W1S(index), mask); +} + +/* * Disable the irq on the all cores for chips that have the EN*_W1{S,C} * registers. */ @@ -405,7 +460,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, unsigned long flags; int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */ - write_lock_irqsave(&octeon_irq_ciu1_rwlock, flags); + raw_spin_lock_irqsave(&octeon_irq_ciu1_lock, flags); for_each_online_cpu(cpu) { int coreid = octeon_coreid_for_cpu(cpu); uint64_t en1 = @@ -422,7 +477,7 @@ static int octeon_irq_ciu1_set_affinity(unsigned int irq, * of them are done. */ cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1)); - write_unlock_irqrestore(&octeon_irq_ciu1_rwlock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_ciu1_lock, flags); return 0; } @@ -455,8 +510,8 @@ static struct irq_chip octeon_irq_chip_ciu1_v2 = { .name = "CIU0", .enable = octeon_irq_ciu1_enable_v2, .disable = octeon_irq_ciu1_disable_all_v2, - .ack = octeon_irq_ciu1_disable_v2, - .eoi = octeon_irq_ciu1_enable_v2, + .ack = octeon_irq_ciu1_ack_v2, + .eoi = octeon_irq_ciu1_eoi_v2, #ifdef CONFIG_SMP .set_affinity = octeon_irq_ciu1_set_affinity_v2, #endif @@ -475,6 +530,8 @@ static struct irq_chip octeon_irq_chip_ciu1 = { #ifdef CONFIG_PCI_MSI +static DEFINE_RAW_SPINLOCK(octeon_irq_msi_lock); + static void octeon_irq_msi_ack(unsigned int irq) { if (!octeon_has_feature(OCTEON_FEATURE_PCIE)) { @@ -515,12 +572,12 @@ static void octeon_irq_msi_enable(unsigned int irq) */ uint64_t en; unsigned long flags; - spin_lock_irqsave(&octeon_irq_msi_lock, flags); + raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0); en |= 1ull << (irq - OCTEON_IRQ_MSI_BIT0); cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en); cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0); - spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); } } @@ -537,12 +594,12 @@ static void octeon_irq_msi_disable(unsigned int irq) */ uint64_t en; unsigned long flags; - spin_lock_irqsave(&octeon_irq_msi_lock, flags); + raw_spin_lock_irqsave(&octeon_irq_msi_lock, flags); en = cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0); en &= ~(1ull << (irq - OCTEON_IRQ_MSI_BIT0)); cvmx_write_csr(CVMX_PEXP_NPEI_MSI_ENB0, en); cvmx_read_csr(CVMX_PEXP_NPEI_MSI_ENB0); - spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); + raw_spin_unlock_irqrestore(&octeon_irq_msi_lock, flags); } } @@ -559,6 +616,7 @@ void __init arch_init_irq(void) { int irq; struct irq_chip *chip0; + struct irq_chip *chip0_timer; struct irq_chip *chip1; #ifdef CONFIG_SMP @@ -574,9 +632,11 @@ void __init arch_init_irq(void) OCTEON_IS_MODEL(OCTEON_CN56XX_PASS2_X) || OCTEON_IS_MODEL(OCTEON_CN52XX_PASS2_X)) { chip0 = &octeon_irq_chip_ciu0_v2; + chip0_timer = &octeon_irq_chip_ciu0_timer_v2; chip1 = &octeon_irq_chip_ciu1_v2; } else { chip0 = &octeon_irq_chip_ciu0; + chip0_timer = &octeon_irq_chip_ciu0_timer; chip1 = &octeon_irq_chip_ciu1; } @@ -590,7 +650,21 @@ void __init arch_init_irq(void) /* 24 - 87 CIU_INT_SUM0 */ for (irq = OCTEON_IRQ_WORKQ0; irq <= OCTEON_IRQ_BOOTDMA; irq++) { - set_irq_chip_and_handler(irq, chip0, handle_percpu_irq); + switch (irq) { + case OCTEON_IRQ_GMX_DRP0: + case OCTEON_IRQ_GMX_DRP1: + case OCTEON_IRQ_IPD_DRP: + case OCTEON_IRQ_KEY_ZERO: + case OCTEON_IRQ_TIMER0: + case OCTEON_IRQ_TIMER1: + case OCTEON_IRQ_TIMER2: + case OCTEON_IRQ_TIMER3: + set_irq_chip_and_handler(irq, chip0_timer, handle_percpu_irq); + break; + default: + set_irq_chip_and_handler(irq, chip0, handle_percpu_irq); + break; + } } /* 88 - 151 CIU_INT_SUM1 */ diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index cfdb4c2ac5c..62ac30eef5e 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <linux/module.h> #include <linux/platform_device.h> @@ -159,6 +160,90 @@ out: } device_initcall(octeon_rng_device_init); +static struct i2c_board_info __initdata octeon_i2c_devices[] = { + { + I2C_BOARD_INFO("ds1337", 0x68), + }, +}; + +static int __init octeon_i2c_devices_init(void) +{ + return i2c_register_board_info(0, octeon_i2c_devices, + ARRAY_SIZE(octeon_i2c_devices)); +} +arch_initcall(octeon_i2c_devices_init); + +#define OCTEON_I2C_IO_BASE 0x1180000001000ull +#define OCTEON_I2C_IO_UNIT_OFFSET 0x200 + +static struct octeon_i2c_data octeon_i2c_data[2]; + +static int __init octeon_i2c_device_init(void) +{ + struct platform_device *pd; + int ret = 0; + int port, num_ports; + + struct resource i2c_resources[] = { + { + .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, + } + }; + + if (OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX)) + num_ports = 2; + else + num_ports = 1; + + for (port = 0; port < num_ports; port++) { + octeon_i2c_data[port].sys_freq = octeon_get_clock_rate(); + /*FIXME: should be examined. At the moment is set for 100Khz */ + octeon_i2c_data[port].i2c_freq = 100000; + + pd = platform_device_alloc("i2c-octeon", port); + if (!pd) { + ret = -ENOMEM; + goto out; + } + + pd->dev.platform_data = octeon_i2c_data + port; + + i2c_resources[0].start = + OCTEON_I2C_IO_BASE + (port * OCTEON_I2C_IO_UNIT_OFFSET); + i2c_resources[0].end = i2c_resources[0].start + 0x1f; + switch (port) { + case 0: + i2c_resources[1].start = OCTEON_IRQ_TWSI; + i2c_resources[1].end = OCTEON_IRQ_TWSI; + break; + case 1: + i2c_resources[1].start = OCTEON_IRQ_TWSI2; + i2c_resources[1].end = OCTEON_IRQ_TWSI2; + break; + default: + BUG(); + } + + ret = platform_device_add_resources(pd, + i2c_resources, + ARRAY_SIZE(i2c_resources)); + if (ret) + goto fail; + + ret = platform_device_add(pd); + if (ret) + goto fail; + } + return ret; +fail: + platform_device_put(pd); +out: + return ret; +} +device_initcall(octeon_i2c_device_init); + /* Octeon SMI/MDIO interface. */ static int __init octeon_mdiobus_device_init(void) { diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index c198efdf583..51e980290ce 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -327,7 +327,7 @@ static void octeon_cpu_die(unsigned int cpu) avail_coremask); } - pr_info("Reset core %d. Available Coremask = %x \n", coreid, + pr_info("Reset core %d. Available Coremask = %x\n", coreid, avail_coremask); cvmx_write_csr(CVMX_CIU_PP_RST, 1 << coreid); cvmx_write_csr(CVMX_CIU_PP_RST, 0); diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c index cfce7af1bca..85ec9cc31d6 100644 --- a/arch/mips/cobalt/pci.c +++ b/arch/mips/cobalt/pci.c @@ -25,7 +25,7 @@ static struct resource cobalt_mem_resource = { static struct resource cobalt_io_resource = { .start = 0x1000, - .end = GT_DEF_PCI0_IO_SIZE - 1, + .end = 0xffffffUL, .name = "PCI I/O", .flags = IORESOURCE_IO, }; diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig index 68e90cd6b2d..f66d406aadc 100644 --- a/arch/mips/configs/db1000_defconfig +++ b/arch/mips/configs/db1000_defconfig @@ -1,78 +1,102 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:24 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 08:46:14 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -CONFIG_MIPS_DB1000=y -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +CONFIG_MIPS_DB1000=y +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1000=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1000=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -106,184 +134,244 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-db1000" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y +# CONFIG_PCMCIA_IOCTL is not set # # PC-card bridges # # CONFIG_PCMCIA_AU1X00 is not set - -# -# PCI Hotplug Support -# +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -294,110 +382,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -407,27 +410,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -436,25 +436,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -467,6 +467,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -492,14 +493,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -516,174 +516,115 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support +# UBI - Unsorted block images # -# CONFIG_PNPACPI is not set +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set # -# Block devices +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -691,16 +632,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -710,35 +649,33 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_CS=m +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -750,198 +687,291 @@ CONFIG_SERIAL_8250_AU1X00=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PPS support # +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support +# Console display driver support # +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# Real Time Clock +# OTG and related infrastructure # -# CONFIG_RTC_CLASS is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +# CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -960,74 +990,65 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_CRAMFS=y +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -1045,10 +1066,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1058,38 +1079,75 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1097,67 +1155,29 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig index 90812830e94..abb9a5805ad 100644 --- a/arch/mips/configs/db1100_defconfig +++ b/arch/mips/configs/db1100_defconfig @@ -1,78 +1,102 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:24 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 08:50:15 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -CONFIG_MIPS_DB1100=y -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +CONFIG_MIPS_DB1100=y +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1100=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1100=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -106,173 +134,242 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-db1100" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +# CONFIG_PCMCIA_IOCTL is not set # -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support +# PC-card bridges # +# CONFIG_PCMCIA_AU1X00 is not set +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -283,110 +380,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -396,27 +408,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -425,25 +434,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -456,6 +465,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -481,14 +491,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -505,161 +514,123 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support -# -# CONFIG_PNPACPI is not set - +# UBI - Unsorted block images # -# Block devices -# -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y # -# Misc devices +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y # -# ATA/ATAPI/MFM/RLL support +# IDE chipset support/bugfixes # -# CONFIG_IDE is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -667,16 +638,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -686,34 +655,33 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=m -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set @@ -725,78 +693,91 @@ CONFIG_SERIAL_8250_AU1X00=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# PCMCIA character devices # +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PPS support # +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set CONFIG_FB_AU1100=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -804,9 +785,10 @@ CONFIG_FB_AU1100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y -CONFIG_FONT_8x8=y +# CONFIG_FONT_8x8 is not set CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set @@ -816,132 +798,186 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# +# CONFIG_LOGO is not set # CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support -# +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# Real Time Clock +# OTG and related infrastructure # -# CONFIG_RTC_CLASS is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -960,69 +996,76 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set @@ -1062,34 +1105,71 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1097,67 +1177,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig index dabf03032e0..991c20adf47 100644 --- a/arch/mips/configs/db1200_defconfig +++ b/arch/mips/configs/db1200_defconfig @@ -1,78 +1,102 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:25 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 10:18:09 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -CONFIG_MIPS_DB1200=y -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +CONFIG_MIPS_DB1200=y +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1200=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_COHERENT=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1200=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -106,180 +134,235 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-db1200" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y +# CONFIG_PCMCIA_IOCTL is not set # # PC-card bridges # -CONFIG_PCMCIA_AU1X00=m - -# -# PCI Hotplug Support -# +# CONFIG_PCMCIA_AU1X00 is not set +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -290,107 +373,25 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -400,21 +401,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -# CONFIG_IEEE80211 is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -423,25 +427,25 @@ CONFIG_NET_CLS_ROUTE=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -454,6 +458,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -479,19 +484,21 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -503,224 +510,134 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_AU1550 is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -# CONFIG_BLK_DEV_INITRD is not set -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set # -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_UB=y +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_IDECD is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_TASK_IOCTL=y +# CONFIG_IDE_PROC_FS is not set # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set CONFIG_BLK_DEV_IDE_AU1XXX=y CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y # CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set -CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128 -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -CONFIG_BLK_DEV_SR=y -# CONFIG_BLK_DEV_SR_VENDOR is not set -CONFIG_CHR_DEV_SG=y -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -# CONFIG_SCSI_SPI_ATTRS is not set -# CONFIG_SCSI_FC_ATTRS is not set -# CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_MIPS_AU1X00_ENET is not set -# CONFIG_SMC91X is not set +CONFIG_SMC91X=y # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -728,16 +645,14 @@ CONFIG_MII=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -747,28 +662,26 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set # # Serial drivers @@ -776,33 +689,22 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y # CONFIG_SERIAL_8250_CS is not set -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # @@ -811,223 +713,624 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set # -# TPM devices +# I2C Algorithms # -# CONFIG_TCG_TPM is not set +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set # -# SPI support +# I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_I2C_AU1550=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set # -# Dallas's 1-wire bus +# External I2C/SMBus adapter drivers # -# CONFIG_W1 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# Hardware Monitoring support +# Other I2C/SMBus bus drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # -# Multimedia devices +# Miscellaneous I2C Chip support # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Digital Video Broadcasting Devices +# SPI Master Controller Drivers # -# CONFIG_DVB is not set +CONFIG_SPI_AU1550=y +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +CONFIG_SENSORS_ADM1025=y +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM70=y +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set CONFIG_FB_AU1200=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # -CONFIG_VGA_CONSOLE=y -# CONFIG_VGACON_SOFT_SCROLLBACK is not set +# CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XPSC=y +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1200=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_SND_SOC_WM8731=y +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # -# Logo configuration +# Miscellaneous USB options # -CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# Sound +# USB Host Controller Drivers # -# CONFIG_SOUND is not set +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# HID Devices +# USB Device Class drivers # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# USB support +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# USB Gadget Support +# USB Imaging devices # -CONFIG_USB_GADGET=m -# CONFIG_USB_GADGET_DEBUG_FILES is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_AT91 is not set -# CONFIG_USB_GADGET_DUMMY_HCD is not set -# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_MDC800 is not set # -# MMC/SD Card support +# USB port drivers # +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set -CONFIG_MMC_BLOCK=y -CONFIG_MMC_AU1X=y +# CONFIG_MMC_UNSAFE_RESUME is not set # -# LED devices +# MMC/SD/SDIO Card Drivers # -# CONFIG_NEW_LEDS is not set +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# LED drivers +# MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AU1X=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y # -# LED Triggers +# LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set # -# InfiniBand support +# LED Triggers # +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# iptables trigger is under Netfilter config (LED target) # +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # -# DMA Clients +# SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set -CONFIG_JFS_FS=y -# CONFIG_JFS_POSIX_ACL is not set -# CONFIG_JFS_SECURITY is not set -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set -CONFIG_GENERIC_ACL=y + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m +CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_UDF_FS=m +CONFIG_UDF_FS=y CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set @@ -1036,21 +1339,17 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -1059,27 +1358,36 @@ CONFIG_CONFIGFS_FS=m CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y # CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1087,93 +1395,140 @@ CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=y -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # -# CONFIG_PARTITION_ADVANCED is not set +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=48M" +CONFIG_CMDLINE="console=ttyS0,115200" # CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1181,67 +1536,32 @@ CONFIG_CMDLINE="mem=48M" CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -CONFIG_LIBCRC32C=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig index a1513137313..5424c9167bf 100644 --- a/arch/mips/configs/db1500_defconfig +++ b/arch/mips/configs/db1500_defconfig @@ -1,80 +1,104 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:26 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 08:46:33 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -CONFIG_MIPS_DB1500=y -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +CONFIG_MIPS_DB1500=y +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1500=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1500=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -87,6 +111,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -94,11 +119,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -108,137 +136,207 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-db1500" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set # # PC-card bridges @@ -246,51 +344,49 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -CONFIG_PCMCIA_AU1X00=m - -# -# PCI Hotplug Support -# +# CONFIG_PCMCIA_AU1X00 is not set +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -301,110 +397,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -414,27 +425,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -443,25 +451,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -474,6 +482,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -499,14 +508,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -524,152 +533,152 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# LPDDR flash memory drivers # -# CONFIG_PNPACPI is not set +# CONFIG_MTD_LPDDR is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_DELKIN is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # # CONFIG_IDE_GENERIC is not set -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_PCIBUS_ORDER is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +CONFIG_BLK_DEV_HPT366=y +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set +CONFIG_BLK_DEV_IDEDMA=y # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# You can enable one or both FireWire driver stacks. # -# CONFIG_I2O is not set # -# Network device support +# The newer stack is recommended. # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -677,88 +686,51 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set +# CONFIG_WLAN is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -766,16 +738,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -785,33 +755,34 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -825,301 +796,143 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PPS support # +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound -# -CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_SEQUENCER_OSS=y -# CONFIG_SND_DYNAMIC_MINORS is not set -CONFIG_SND_SUPPORT_OLD_API=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set - -# -# Generic devices -# -CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DUMMY is not set -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -# CONFIG_SND_SERIAL_U16550 is not set -# CONFIG_SND_MPU401 is not set - -# -# PCI devices -# -# CONFIG_SND_AD1889 is not set -# CONFIG_SND_ALS300 is not set -# CONFIG_SND_ALI5451 is not set -# CONFIG_SND_ATIIXP is not set -# CONFIG_SND_ATIIXP_MODEM is not set -# CONFIG_SND_AU8810 is not set -# CONFIG_SND_AU8820 is not set -# CONFIG_SND_AU8830 is not set -# CONFIG_SND_AZT3328 is not set -# CONFIG_SND_BT87X is not set -# CONFIG_SND_CA0106 is not set -# CONFIG_SND_CMIPCI is not set -# CONFIG_SND_CS4281 is not set -# CONFIG_SND_CS46XX is not set -# CONFIG_SND_DARLA20 is not set -# CONFIG_SND_GINA20 is not set -# CONFIG_SND_LAYLA20 is not set -# CONFIG_SND_DARLA24 is not set -# CONFIG_SND_GINA24 is not set -# CONFIG_SND_LAYLA24 is not set -# CONFIG_SND_MONA is not set -# CONFIG_SND_MIA is not set -# CONFIG_SND_ECHO3G is not set -# CONFIG_SND_INDIGO is not set -# CONFIG_SND_INDIGOIO is not set -# CONFIG_SND_INDIGODJ is not set -# CONFIG_SND_EMU10K1 is not set -# CONFIG_SND_EMU10K1X is not set -# CONFIG_SND_ENS1370 is not set -# CONFIG_SND_ENS1371 is not set -# CONFIG_SND_ES1938 is not set -# CONFIG_SND_ES1968 is not set -# CONFIG_SND_FM801 is not set -# CONFIG_SND_HDA_INTEL is not set -# CONFIG_SND_HDSP is not set -# CONFIG_SND_HDSPM is not set -# CONFIG_SND_ICE1712 is not set -# CONFIG_SND_ICE1724 is not set -# CONFIG_SND_INTEL8X0 is not set -# CONFIG_SND_INTEL8X0M is not set -# CONFIG_SND_KORG1212 is not set -# CONFIG_SND_MAESTRO3 is not set -# CONFIG_SND_MIXART is not set -# CONFIG_SND_NM256 is not set -# CONFIG_SND_PCXHR is not set -# CONFIG_SND_RIPTIDE is not set -# CONFIG_SND_RME32 is not set -# CONFIG_SND_RME96 is not set -# CONFIG_SND_RME9652 is not set -# CONFIG_SND_SONICVIBES is not set -# CONFIG_SND_TRIDENT is not set -# CONFIG_SND_VIA82XX is not set -# CONFIG_SND_VIA82XX_MODEM is not set -# CONFIG_SND_VX222 is not set -# CONFIG_SND_YMFPCI is not set -# CONFIG_SND_AC97_POWER_SAVE is not set - -# -# ALSA MIPS devices -# -CONFIG_SND_AU1X00=m - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -# CONFIG_SND_SOC is not set - -# -# Open Sound System -# -CONFIG_SOUND_PRIME=y -# CONFIG_OBSOLETE_OSS is not set -# CONFIG_SOUND_BT878 is not set -# CONFIG_SOUND_ICH is not set -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -# CONFIG_SOUND_VIA82CXXX is not set -CONFIG_AC97_BUS=m - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support # +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -CONFIG_USB_YEALINK=m -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1128,7 +941,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1136,112 +949,107 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set -CONFIG_USB_LD=m +# CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # -# MMC/SD Card support +# OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock +# RTC interfaces # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# SPI RTC drivers # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Devices +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Auxiliary Display support -# - -# -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1260,74 +1068,81 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set +CONFIG_NLS_CODEPAGE_850=y # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -1345,10 +1160,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1358,38 +1173,76 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1397,67 +1250,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig index 6b64339c001..949b6dcf634 100644 --- a/arch/mips/configs/db1550_defconfig +++ b/arch/mips/configs/db1550_defconfig @@ -1,79 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:27 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 08:58:22 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -CONFIG_MIPS_DB1550=y -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +CONFIG_MIPS_DB1550=y +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1550=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1550=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -107,137 +135,205 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-db1550" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y +# CONFIG_PCMCIA_IOCTL is not set +# CONFIG_CARDBUS is not set # # PC-card bridges @@ -245,51 +341,49 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -CONFIG_PCMCIA_AU1X00=m - -# -# PCI Hotplug Support -# +# CONFIG_PCMCIA_AU1X00 is not set +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -300,110 +394,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -413,27 +422,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -442,25 +448,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -473,6 +479,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -498,20 +505,23 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # # CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -523,105 +533,96 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -CONFIG_MTD_NAND=m +CONFIG_MTD_NAND=y # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_AU1550=m +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_AU1550=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set +# CONFIG_BLK_DEV_LOOP is not set # -# ATA/ATAPI/MFM/RLL support +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_UB=y +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_DELKIN is not set -# CONFIG_BLK_DEV_IDECD is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -631,82 +632,65 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# You can enable one or both FireWire driver stacks. # -# CONFIG_I2O is not set # -# Network device support +# The newer stack is recommended. # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -714,96 +698,53 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set +# CONFIG_WLAN is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support +# Enable WiMAX (Networking options) to see the WiMAX drivers # -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -811,16 +752,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -830,26 +769,27 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -866,199 +806,420 @@ CONFIG_SERIAL_8250_AU1X00=y # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set # -# TPM devices +# I2C Algorithms # -# CONFIG_TCG_TPM is not set +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set # -# SPI support +# PC SMBus host controller drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set # -# Dallas's 1-wire bus +# I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_W1 is not set +CONFIG_I2C_AU1550=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set # -# Hardware Monitoring support +# External I2C/SMBus adapter drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# Multimedia devices +# Other I2C/SMBus bus drivers # -# CONFIG_VIDEO_DEV is not set +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set # -# Digital Video Broadcasting Devices +# Miscellaneous I2C Chip support # -# CONFIG_DVB is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Graphics support +# SPI Master Controller Drivers # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_SPI_AU1550=y +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set # -# Sound +# SPI Protocol Masters # -# CONFIG_SOUND is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # -# HID Devices +# PPS support # -# CONFIG_HID is not set +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# USB support +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + # +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +CONFIG_SND_HRTIMER=y +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_PCI is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set +# CONFIG_SND_PCMCIA is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AU1XPSC=y +# CONFIG_SND_SOC_DB1200 is not set +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +# CONFIG_SOUND_PRIME is not set +# CONFIG_HID_SUPPORT is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # -# DMA Clients +# SPI RTC drivers # +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -1077,75 +1238,82 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_CONFIGFS_FS=y +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +# CONFIG_JFFS2_FS_POSIX_ACL is not set +# CONFIG_JFFS2_FS_SECURITY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set @@ -1162,10 +1330,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1175,38 +1343,75 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1214,67 +1419,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig index b71a0a4fb95..4caa0e0fee8 100644 --- a/arch/mips/configs/lemote2f_defconfig +++ b/arch/mips/configs/lemote2f_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.32-rc6 -# Mon Nov 9 23:42:42 2009 +# Linux kernel version: 2.6.33-rc2 +# Mon Jan 4 13:41:09 2010 # CONFIG_MIPS=y @@ -27,6 +27,7 @@ CONFIG_MACH_LOONGSON=y # CONFIG_PNX8550_STB810 is not set # CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP28 is not set @@ -51,6 +52,9 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y # CONFIG_LEMOTE_FULOONG2E is not set CONFIG_LEMOTE_MACH2F=y CONFIG_CS5536=y +CONFIG_CS5536_MFGPT=y +CONFIG_LOONGSON_SUSPEND=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set @@ -63,13 +67,8 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_CEVT_R4K_LIB=y -CONFIG_CEVT_R4K=y -CONFIG_CSRC_R4K_LIB=y -CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_I8259=y # CONFIG_NO_IOPORT is not set @@ -109,13 +108,15 @@ CONFIG_CPU_LOONGSON2F=y # CONFIG_CPU_SB1 is not set # CONFIG_CPU_CAVIUM_OCTEON is not set CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_SYS_SUPPORTS_ZBOOT_UART16550=y CONFIG_CPU_LOONGSON2=y CONFIG_SYS_HAS_CPU_LOONGSON2F=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_CPUFREQ=y +CONFIG_CPU_SUPPORTS_ADDRWINCFG=y +CONFIG_CPU_SUPPORTS_UNCACHED_ACCELERATED=y # # Kernel type @@ -137,7 +138,6 @@ CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set @@ -146,17 +146,11 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y - -# -# Memory hotplug is currently incompatible with Software Suspend -# CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y # CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_TICK_ONESHOT=y @@ -175,7 +169,7 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_KEXEC is not set +CONFIG_KEXEC=y # CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y @@ -194,9 +188,9 @@ CONFIG_LOCALVERSION="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y -# CONFIG_KERNEL_GZIP is not set +CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set -CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZMA is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -211,6 +205,7 @@ CONFIG_AUDIT=y # CONFIG_TREE_RCU=y # CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set # CONFIG_RCU_TRACE is not set CONFIG_RCU_FANOUT=64 # CONFIG_RCU_FANOUT_EXACT is not set @@ -224,7 +219,11 @@ CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -256,14 +255,18 @@ CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set -# CONFIG_PROFILING is not set +CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y +CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_SYSCALL_WRAPPERS=y # # GCOV-based kernel profiling # -# CONFIG_SLOW_WORK is not set +# CONFIG_GCOV_KERNEL is not set +CONFIG_SLOW_WORK=y +# CONFIG_SLOW_WORK_DEBUG is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -283,14 +286,41 @@ CONFIG_BLOCK_COMPAT=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_DEADLINE=m CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set CONFIG_FREEZER=y # @@ -314,7 +344,7 @@ CONFIG_MMU=y CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_MISC=m CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -335,9 +365,34 @@ CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION_NVS=y CONFIG_HIBERNATION=y CONFIG_PM_STD_PARTITION="/dev/hda3" -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y +CONFIG_MIPS_EXTERNAL_TIMER=y +CONFIG_MIPS_CPUFREQ=y + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +CONFIG_CPU_FREQ_DEBUG=y +CONFIG_CPU_FREQ_STAT=m +CONFIG_CPU_FREQ_STAT_DETAILS=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=m +CONFIG_CPU_FREQ_GOV_USERSPACE=m +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m + +# +# CPUFreq processor drivers +# +CONFIG_LOONGSON2_CPUFREQ=m CONFIG_NET=y -CONFIG_COMPAT_NETLINK_MESSAGES=y # # Networking options @@ -346,11 +401,12 @@ CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set +CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set -# CONFIG_NET_KEY is not set +CONFIG_NET_KEY=m +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -361,12 +417,13 @@ CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y # CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set CONFIG_IP_MROUTE=y CONFIG_IP_PIMSM_V1=y CONFIG_IP_PIMSM_V2=y -# CONFIG_ARPD is not set +CONFIG_ARPD=y CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set @@ -399,30 +456,34 @@ CONFIG_DEFAULT_BIC=y # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="bic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y CONFIG_IPV6=m CONFIG_IPV6_PRIVACY=y -# CONFIG_IPV6_ROUTER_PREF is not set +CONFIG_IPV6_ROUTER_PREF=y +# CONFIG_IPV6_ROUTE_INFO is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set # CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +# CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y # CONFIG_IPV6_MROUTE is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y +CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration @@ -446,17 +507,22 @@ CONFIG_NETFILTER_ADVANCED=y # # CONFIG_IP6_NF_QUEUE is not set # CONFIG_IP6_NF_IPTABLES is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set -# CONFIG_BRIDGE is not set +CONFIG_STP=m +CONFIG_BRIDGE=m # CONFIG_NET_DSA is not set -# CONFIG_VLAN_8021Q is not set +CONFIG_VLAN_8021Q=m +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set -# CONFIG_IPX is not set +CONFIG_IPX=m +# CONFIG_IPX_INTERN is not set # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set @@ -518,26 +584,61 @@ CONFIG_NET_SCH_FIFO=y # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -# CONFIG_BT is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIBTUSB=m +# CONFIG_BT_HCIBTSDIO is not set +# CONFIG_BT_HCIUART is not set +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIVHCI=m +# CONFIG_BT_MRVL is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y CONFIG_WIRELESS=y -# CONFIG_CFG80211 is not set -CONFIG_CFG80211_DEFAULT_PS_VALUE=0 +CONFIG_WEXT_CORE=y +CONFIG_WEXT_PROC=y +CONFIG_CFG80211=m +# CONFIG_NL80211_TESTMODE is not set +# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set +# CONFIG_CFG80211_REG_DEBUG is not set +CONFIG_CFG80211_DEFAULT_PS=y +# CONFIG_CFG80211_DEBUGFS is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set -CONFIG_WIRELESS_EXT=y +CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y -# CONFIG_LIB80211 is not set - -# -# CFG80211 needs to be enabled for MAC80211 -# +CONFIG_LIB80211=m +CONFIG_LIB80211_DEBUG=y +CONFIG_MAC80211=m +# CONFIG_MAC80211_RC_PID is not set +CONFIG_MAC80211_RC_MINSTREL=y +# CONFIG_MAC80211_RC_DEFAULT_PID is not set +CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y +CONFIG_MAC80211_RC_DEFAULT="minstrel" +# CONFIG_MAC80211_MESH is not set +CONFIG_MAC80211_LEDS=y +# CONFIG_MAC80211_DEBUGFS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set # CONFIG_WIMAX is not set CONFIG_RFKILL=m -# CONFIG_RFKILL_INPUT is not set +CONFIG_RFKILL_LEDS=y +CONFIG_RFKILL_INPUT=y # CONFIG_NET_9P is not set # @@ -555,7 +656,7 @@ CONFIG_FW_LOADER=y CONFIG_FIRMWARE_IN_KERNEL=y CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set +CONFIG_CONNECTOR=m # CONFIG_MTD is not set # CONFIG_PARPORT is not set # CONFIG_PNP is not set @@ -566,7 +667,12 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y +CONFIG_BLK_DEV_CRYPTOLOOP=m + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_DRBD is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_UB is not set @@ -577,19 +683,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_BLK_DEV_HD is not set -CONFIG_MISC_DEVICES=y -# CONFIG_PHANTOM is not set -# CONFIG_SGI_IOC4 is not set -# CONFIG_TIFM_CORE is not set -# CONFIG_ENCLOSURE_SERVICES is not set -# CONFIG_HP_ILO is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -# CONFIG_EEPROM_93CX6 is not set -# CONFIG_CB710_CORE is not set +# CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -619,8 +713,7 @@ CONFIG_BLK_DEV_IDEDMA_SFF=y # CONFIG_BLK_DEV_IDEPCI=y # CONFIG_IDEPCI_PCIBUS_ORDER is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_AEC62XX is not set @@ -700,7 +793,29 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_DH is not set # CONFIG_SCSI_OSD_INITIATOR is not set # CONFIG_ATA is not set -# CONFIG_MD is not set +CONFIG_MD=y +CONFIG_BLK_DEV_MD=m +CONFIG_MD_LINEAR=m +CONFIG_MD_RAID0=m +CONFIG_MD_RAID1=m +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m +CONFIG_MD_RAID6_PQ=m +# CONFIG_ASYNC_RAID6_TEST is not set +CONFIG_MD_MULTIPATH=m +CONFIG_MD_FAULTY=m +CONFIG_BLK_DEV_DM=m +CONFIG_DM_DEBUG=y +CONFIG_DM_CRYPT=m +CONFIG_DM_SNAPSHOT=m +CONFIG_DM_MIRROR=m +CONFIG_DM_LOG_USERSPACE=m +CONFIG_DM_ZERO=m +CONFIG_DM_MULTIPATH=m +CONFIG_DM_MULTIPATH_QL=m +CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_DELAY=m +CONFIG_DM_UEVENT=y # CONFIG_FUSION is not set # @@ -712,19 +827,19 @@ CONFIG_SCSI_WAIT_SCAN=m # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_IFB is not set -# CONFIG_DUMMY is not set +CONFIG_DUMMY=m # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set +CONFIG_TUN=m +CONFIG_VETH=m # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -738,6 +853,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_VENDOR_RACAL is not set # CONFIG_DNET is not set # CONFIG_NET_TULIP is not set @@ -769,7 +885,7 @@ CONFIG_NET_PCI=y # CONFIG_8139CP is not set CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set -CONFIG_8139TOO_TUNE_TWISTER=y +# CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set # CONFIG_R6040 is not set @@ -795,6 +911,7 @@ CONFIG_NETDEV_1000=y # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y +CONFIG_R8169_VLAN=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set @@ -810,15 +927,31 @@ CONFIG_R8169=y # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set CONFIG_WLAN=y -CONFIG_WLAN_PRE80211=y -# CONFIG_STRIP is not set -# CONFIG_WAVELAN is not set -CONFIG_WLAN_80211=y -# CONFIG_LIBERTAS is not set +# CONFIG_LIBERTAS_THINFIRM is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set +# CONFIG_ATH_COMMON is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set # CONFIG_HOSTAP is not set +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_IWLWIFI is not set +# CONFIG_IWM is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_P54_COMMON is not set +# CONFIG_RT2X00 is not set +# CONFIG_WL12XX is not set +# CONFIG_ZD1211RW is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -831,17 +964,39 @@ CONFIG_WLAN_80211=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +CONFIG_USB_NET_CDC_EEM=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +CONFIG_USB_NET_CDC_SUBSET=m +# CONFIG_USB_ALI_M5632 is not set +# CONFIG_USB_AN2720 is not set +CONFIG_USB_BELKIN=y +CONFIG_USB_ARMLINUX=y +# CONFIG_USB_EPSON2888 is not set +# CONFIG_USB_KC2190 is not set +CONFIG_USB_NET_ZAURUS=m # CONFIG_USB_HSO is not set +# CONFIG_USB_NET_INT51X1 is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_NETCONSOLE=m +CONFIG_NETCONSOLE_DYNAMIC=y +CONFIG_NETPOLL=y +# CONFIG_NETPOLL_TRAP is not set +CONFIG_NET_POLL_CONTROLLER=y +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set # CONFIG_PHONE is not set @@ -849,8 +1004,9 @@ CONFIG_WLAN_80211=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set +CONFIG_INPUT_FF_MEMLESS=m +CONFIG_INPUT_POLLDEV=m +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -884,7 +1040,7 @@ CONFIG_MOUSE_PS2_SYNAPTICS=y # CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_APPLETOUCH is not set +CONFIG_MOUSE_APPLETOUCH=m # CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_INPORT is not set # CONFIG_MOUSE_LOGIBM is not set @@ -904,6 +1060,7 @@ CONFIG_SERIO_I8042=y # CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -934,8 +1091,7 @@ CONFIG_SERIAL_NONSTANDARD=y # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250=m # CONFIG_SERIAL_8250_PCI is not set CONFIG_SERIAL_8250_NR_UARTS=16 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -953,8 +1109,7 @@ CONFIG_SERIAL_8250_FOURPORT=y # # Non-8250 serial port support # -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_CORE=m # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set @@ -1033,14 +1188,18 @@ CONFIG_VIDEO_MEDIA=m # # Multimedia drivers # +CONFIG_IR_CORE=m +CONFIG_VIDEO_IR=m # CONFIG_MEDIA_ATTACH is not set CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_VMALLOC=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set # CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y -# CONFIG_VIDEO_VIVI is not set +CONFIG_VIDEO_VIVI=m # CONFIG_VIDEO_PMS is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set @@ -1049,52 +1208,55 @@ CONFIG_V4L_USB_DRIVERS=y CONFIG_USB_VIDEO_CLASS=m CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y CONFIG_USB_GSPCA=m -# CONFIG_USB_M5602 is not set -# CONFIG_USB_STV06XX is not set +CONFIG_USB_M5602=m +CONFIG_USB_STV06XX=m # CONFIG_USB_GL860 is not set -# CONFIG_USB_GSPCA_CONEX is not set -# CONFIG_USB_GSPCA_ETOMS is not set -# CONFIG_USB_GSPCA_FINEPIX is not set +CONFIG_USB_GSPCA_CONEX=m +CONFIG_USB_GSPCA_ETOMS=m +CONFIG_USB_GSPCA_FINEPIX=m # CONFIG_USB_GSPCA_JEILINJ is not set -# CONFIG_USB_GSPCA_MARS is not set -# CONFIG_USB_GSPCA_MR97310A is not set -# CONFIG_USB_GSPCA_OV519 is not set -# CONFIG_USB_GSPCA_OV534 is not set -# CONFIG_USB_GSPCA_PAC207 is not set -# CONFIG_USB_GSPCA_PAC7311 is not set -# CONFIG_USB_GSPCA_SN9C20X is not set -# CONFIG_USB_GSPCA_SONIXB is not set -# CONFIG_USB_GSPCA_SONIXJ is not set -# CONFIG_USB_GSPCA_SPCA500 is not set -# CONFIG_USB_GSPCA_SPCA501 is not set -# CONFIG_USB_GSPCA_SPCA505 is not set -# CONFIG_USB_GSPCA_SPCA506 is not set -# CONFIG_USB_GSPCA_SPCA508 is not set -# CONFIG_USB_GSPCA_SPCA561 is not set -# CONFIG_USB_GSPCA_SQ905 is not set -# CONFIG_USB_GSPCA_SQ905C is not set -# CONFIG_USB_GSPCA_STK014 is not set -# CONFIG_USB_GSPCA_SUNPLUS is not set -# CONFIG_USB_GSPCA_T613 is not set -# CONFIG_USB_GSPCA_TV8532 is not set -# CONFIG_USB_GSPCA_VC032X is not set -# CONFIG_USB_GSPCA_ZC3XX is not set +CONFIG_USB_GSPCA_MARS=m +CONFIG_USB_GSPCA_MR97310A=m +CONFIG_USB_GSPCA_OV519=m +CONFIG_USB_GSPCA_OV534=m +CONFIG_USB_GSPCA_PAC207=m +# CONFIG_USB_GSPCA_PAC7302 is not set +CONFIG_USB_GSPCA_PAC7311=m +CONFIG_USB_GSPCA_SN9C20X=m +CONFIG_USB_GSPCA_SN9C20X_EVDEV=y +CONFIG_USB_GSPCA_SONIXB=m +CONFIG_USB_GSPCA_SONIXJ=m +CONFIG_USB_GSPCA_SPCA500=m +CONFIG_USB_GSPCA_SPCA501=m +CONFIG_USB_GSPCA_SPCA505=m +CONFIG_USB_GSPCA_SPCA506=m +CONFIG_USB_GSPCA_SPCA508=m +CONFIG_USB_GSPCA_SPCA561=m +CONFIG_USB_GSPCA_SQ905=m +CONFIG_USB_GSPCA_SQ905C=m +CONFIG_USB_GSPCA_STK014=m +# CONFIG_USB_GSPCA_STV0680 is not set +CONFIG_USB_GSPCA_SUNPLUS=m +CONFIG_USB_GSPCA_T613=m +CONFIG_USB_GSPCA_TV8532=m +CONFIG_USB_GSPCA_VC032X=m +CONFIG_USB_GSPCA_ZC3XX=m # CONFIG_VIDEO_HDPVR is not set # CONFIG_USB_VICAM is not set # CONFIG_USB_IBMCAM is not set # CONFIG_USB_KONICAWC is not set # CONFIG_USB_QUICKCAM_MESSENGER is not set -# CONFIG_USB_ET61X251 is not set +CONFIG_USB_ET61X251=m # CONFIG_USB_OV511 is not set # CONFIG_USB_SE401 is not set -# CONFIG_USB_SN9C102 is not set +CONFIG_USB_SN9C102=m # CONFIG_USB_STV680 is not set -# CONFIG_USB_ZC0301 is not set +CONFIG_USB_ZC0301=m # CONFIG_USB_PWC is not set CONFIG_USB_PWC_INPUT_EVDEV=y -# CONFIG_USB_ZR364XX is not set -# CONFIG_USB_STKWEBCAM is not set -# CONFIG_USB_S2255 is not set +CONFIG_USB_ZR364XX=m +CONFIG_USB_STKWEBCAM=m +CONFIG_USB_S2255=m # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -1132,6 +1294,7 @@ CONFIG_FB_TILEBLITTING=y # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set +# CONFIG_FB_UVESA is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set @@ -1161,7 +1324,7 @@ CONFIG_FB_SIS_315=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_LCD_CLASS_DEVICE is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_GENERIC=m # # Display device support @@ -1193,28 +1356,44 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y CONFIG_SOUND=m -# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SOUND_OSS_CORE=y +CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m -# CONFIG_SND_SEQUENCER is not set -# CONFIG_SND_MIXER_OSS is not set -# CONFIG_SND_PCM_OSS is not set -# CONFIG_SND_HRTIMER is not set +CONFIG_SND_HWDEP=m +CONFIG_SND_RAWMIDI=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m +CONFIG_SND_PCM_OSS_PLUGINS=y +CONFIG_SND_SEQUENCER_OSS=y +CONFIG_SND_HRTIMER=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y # CONFIG_SND_RTCTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set -# CONFIG_SND_SUPPORT_OLD_API is not set -# CONFIG_SND_VERBOSE_PROCFS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y -# CONFIG_SND_RAWMIDI_SEQ is not set +CONFIG_SND_RAWMIDI_SEQ=m # CONFIG_SND_OPL3_LIB_SEQ is not set # CONFIG_SND_OPL4_LIB_SEQ is not set # CONFIG_SND_SBAWE_SEQ is not set # CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=m -# CONFIG_SND_DRIVERS is not set +CONFIG_SND_DRIVERS=y +CONFIG_SND_DUMMY=m +CONFIG_SND_VIRMIDI=m +# CONFIG_SND_MTPAV is not set +CONFIG_SND_SERIAL_U16550=m +CONFIG_SND_MPU401=m +CONFIG_SND_AC97_POWER_SAVE=y +CONFIG_SND_AC97_POWER_SAVE_DEFAULT=10 CONFIG_SND_PCI=y # CONFIG_SND_AD1889 is not set # CONFIG_SND_ALS300 is not set @@ -1281,7 +1460,10 @@ CONFIG_SND_CS5535AUDIO=m # CONFIG_SND_VX222 is not set # CONFIG_SND_YMFPCI is not set # CONFIG_SND_MIPS is not set -# CONFIG_SND_USB is not set +CONFIG_SND_USB=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_CAIAQ=m +CONFIG_SND_USB_CAIAQ_INPUT=y # CONFIG_SND_SOC is not set # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m @@ -1299,32 +1481,41 @@ CONFIG_USB_HIDDEV=y # # Special HID drivers # -# CONFIG_HID_A4TECH is not set -# CONFIG_HID_APPLE is not set -# CONFIG_HID_BELKIN is not set -# CONFIG_HID_CHERRY is not set -# CONFIG_HID_CHICONY is not set -# CONFIG_HID_CYPRESS is not set -# CONFIG_HID_DRAGONRISE is not set -# CONFIG_HID_EZKEY is not set -# CONFIG_HID_KYE is not set -# CONFIG_HID_GYRATION is not set -# CONFIG_HID_TWINHAN is not set -# CONFIG_HID_KENSINGTON is not set -# CONFIG_HID_LOGITECH is not set -# CONFIG_HID_MICROSOFT is not set -# CONFIG_HID_MONTEREY is not set -# CONFIG_HID_NTRIG is not set -# CONFIG_HID_PANTHERLORD is not set -# CONFIG_HID_PETALYNX is not set -# CONFIG_HID_SAMSUNG is not set -# CONFIG_HID_SONY is not set -# CONFIG_HID_SUNPLUS is not set -# CONFIG_HID_GREENASIA is not set -# CONFIG_HID_SMARTJOYPLUS is not set -# CONFIG_HID_TOPSEED is not set -# CONFIG_HID_THRUSTMASTER is not set -# CONFIG_HID_ZEROPLUS is not set +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DRAGONRISE=m +CONFIG_DRAGONRISE_FF=y +CONFIG_HID_EZKEY=m +CONFIG_HID_KYE=m +CONFIG_HID_GYRATION=m +CONFIG_HID_TWINHAN=m +CONFIG_HID_KENSINGTON=m +CONFIG_HID_LOGITECH=m +CONFIG_LOGITECH_FF=y +CONFIG_LOGIRUMBLEPAD2_FF=y +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_NTRIG=m +CONFIG_HID_PANTHERLORD=m +CONFIG_PANTHERLORD_FF=y +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_HID_GREENASIA=m +CONFIG_GREENASIA_FF=y +CONFIG_HID_SMARTJOYPLUS=m +CONFIG_SMARTJOYPLUS_FF=y +CONFIG_HID_TOPSEED=m +CONFIG_HID_THRUSTMASTER=m +CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_WACOM=m +CONFIG_HID_ZEROPLUS=m +CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1344,7 +1535,7 @@ CONFIG_USB_SUSPEND=y CONFIG_USB_OTG_WHITELIST=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y -# CONFIG_USB_WUSB is not set +CONFIG_USB_WUSB=m # CONFIG_USB_WUSB_CBAF is not set # @@ -1366,14 +1557,15 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=m # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set -# CONFIG_USB_WHCI_HCD is not set -# CONFIG_USB_HWA_HCD is not set +CONFIG_USB_WHCI_HCD=m +CONFIG_USB_HWA_HCD=m +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers # CONFIG_USB_ACM=m -# CONFIG_USB_PRINTER is not set +CONFIG_USB_PRINTER=m CONFIG_USB_WDM=m # CONFIG_USB_TMC is not set @@ -1397,7 +1589,7 @@ CONFIG_USB_STORAGE_ALAUDA=m # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set -# CONFIG_USB_LIBUSUAL is not set +CONFIG_USB_LIBUSUAL=y # # USB Imaging devices @@ -1467,7 +1659,7 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set +CONFIG_USB_LED=m # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set # CONFIG_USB_IDMOUSE is not set @@ -1480,16 +1672,95 @@ CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set -# CONFIG_USB_GADGET is not set +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_R8A66597 is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C_HSOTG is not set +# CONFIG_USB_GADGET_IMX is not set +# CONFIG_USB_GADGET_S3C2410 is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=m +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LANGWELL is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +CONFIG_USB_GADGET_DUALSPEED=y +# CONFIG_USB_ZERO is not set +# CONFIG_USB_AUDIO is not set +# CONFIG_USB_ETH is not set +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure # # CONFIG_NOP_USB_XCEIV is not set -# CONFIG_UWB is not set -# CONFIG_MMC is not set +CONFIG_UWB=m +CONFIG_UWB_HWA=m +CONFIG_UWB_WHCI=m +# CONFIG_UWB_WLP is not set +# CONFIG_UWB_I1480U is not set +CONFIG_MMC=m +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_TIFM_SD is not set +# CONFIG_MMC_CB710 is not set +# CONFIG_MMC_VIA_SDMMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m + +# +# LED drivers +# + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set @@ -1504,22 +1775,18 @@ CONFIG_STAGING=y # CONFIG_STAGING_EXCLUDE_BUILD is not set # CONFIG_ET131X is not set # CONFIG_USB_IP_COMMON is not set -# CONFIG_PRISM2_USB is not set +# CONFIG_W35UND is not set # CONFIG_ECHO is not set +# CONFIG_OTUS is not set # CONFIG_COMEDI is not set # CONFIG_ASUS_OLED is not set # CONFIG_ALTERA_PCIE_CHDMA is not set -# CONFIG_RTL8187SE is not set -# CONFIG_RTL8192SU is not set +# CONFIG_R8187SE is not set # CONFIG_RTL8192E is not set # CONFIG_INPUT_MIMIO is not set # CONFIG_TRANZPORT is not set # -# Android -# - -# # Qualcomm MSM Camera And Video # @@ -1527,7 +1794,6 @@ CONFIG_STAGING=y # Camera Sensor Selection # # CONFIG_INPUT_GPIO is not set -# CONFIG_DST is not set # CONFIG_POHMELFS is not set # CONFIG_B3DFG is not set # CONFIG_PLAN9AUTH is not set @@ -1544,28 +1810,55 @@ CONFIG_STAGING=y # # CONFIG_RAR_REGISTER is not set # CONFIG_IIO is not set +# CONFIG_RAMZSWAP is not set +# CONFIG_BATMAN_ADV is not set +# CONFIG_STRIP is not set +# CONFIG_WAVELAN is not set CONFIG_FB_SM7XX=y -CONFIG_FB_SM7XX_ACCEL=y +# CONFIG_FB_SM7XX_ACCEL is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4_FS is not set +CONFIG_EXT4_FS=y +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set +# CONFIG_EXT4_DEBUG is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=y +# CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +CONFIG_REISERFS_PROC_INFO=y +CONFIG_REISERFS_FS_XATTR=y +# CONFIG_REISERFS_FS_POSIX_ACL is not set +# CONFIG_REISERFS_FS_SECURITY is not set +CONFIG_JFS_FS=m +CONFIG_JFS_POSIX_ACL=y +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set CONFIG_FS_POSIX_ACL=y -# CONFIG_XFS_FS is not set +CONFIG_XFS_FS=m +CONFIG_XFS_QUOTA=y +CONFIG_XFS_POSIX_ACL=y +# CONFIG_XFS_RT is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_BTRFS_FS is not set +CONFIG_BTRFS_FS=m +# CONFIG_BTRFS_FS_POSIX_ACL is not set # CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y @@ -1575,17 +1868,25 @@ CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=m # CONFIG_QFMT_V1 is not set -# CONFIG_QFMT_V2 is not set +CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set +CONFIG_AUTOFS_FS=m +CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set # # Caches # -# CONFIG_FSCACHE is not set +CONFIG_FSCACHE=m +# CONFIG_FSCACHE_STATS is not set +# CONFIG_FSCACHE_HISTOGRAM is not set +# CONFIG_FSCACHE_DEBUG is not set +# CONFIG_FSCACHE_OBJECT_LIST is not set +CONFIG_CACHEFILES=m +# CONFIG_CACHEFILES_DEBUG is not set +# CONFIG_CACHEFILES_HISTOGRAM is not set # # CD-ROM/DVD Filesystems @@ -1599,11 +1900,13 @@ CONFIG_ZISOFS=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m -# CONFIG_MSDOS_FS is not set +CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set +CONFIG_NTFS_FS=m +# CONFIG_NTFS_DEBUG is not set +CONFIG_NTFS_RW=y # # Pseudo filesystems @@ -1616,23 +1919,60 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set -# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_CONFIGFS_FS=m +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=m +CONFIG_SQUASHFS=m +CONFIG_SQUASHFS_EMBEDDED=y +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_MTD is not set +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +CONFIG_ROMFS_ON_BLOCK=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set +# CONFIG_NFS_FSCACHE is not set +CONFIG_NFSD=m +CONFIG_NFSD_V3=y +# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V4=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y +CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m -# CONFIG_RPCSEC_GSS_KRB5 is not set +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_UPCALL is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_DFS_UPCALL is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1643,45 +1983,45 @@ CONFIG_SUNRPC=m # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf-8" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set +CONFIG_NLS_DEFAULT="utf8" +CONFIG_NLS_CODEPAGE_437=m +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # @@ -1695,125 +2035,155 @@ CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_RING_BUFFER_ALLOW_SWAP=y +CONFIG_TRACING=y CONFIG_TRACING_SUPPORT=y # CONFIG_FTRACE is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set # # Security options # -# CONFIG_KEYS is not set +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_XOR_BLOCKS=m +CONFIG_ASYNC_CORE=m +CONFIG_ASYNC_MEMCPY=m +CONFIG_ASYNC_XOR=m +CONFIG_ASYNC_PQ=m +CONFIG_ASYNC_RAID6_RECOV=m CONFIG_CRYPTO=y # # Crypto core or helper # +CONFIG_CRYPTO_FIPS=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG=m CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_PCOMP=y -CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER2=y -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_GF128MUL=m +CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_WORKQUEUE=y -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_AUTHENC is not set -# CONFIG_CRYPTO_TEST is not set +CONFIG_CRYPTO_CRYPTD=m +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m # # Authenticated Encryption with Associated Data # -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_SEQIV is not set +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_SEQIV=m # # Block modes # -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_CTR is not set +CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CTR=m # CONFIG_CRYPTO_CTS is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_XTS is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_PCBC=m +CONFIG_CRYPTO_XTS=m # # Hash modes # -# CONFIG_CRYPTO_HMAC is not set -# CONFIG_CRYPTO_XCBC is not set +CONFIG_CRYPTO_HMAC=m +CONFIG_CRYPTO_XCBC=m # CONFIG_CRYPTO_VMAC is not set # # Digest # -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_GHASH is not set -# CONFIG_CRYPTO_MD4 is not set -# CONFIG_CRYPTO_MD5 is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_RMD128 is not set -# CONFIG_CRYPTO_RMD160 is not set -# CONFIG_CRYPTO_RMD256 is not set -# CONFIG_CRYPTO_RMD320 is not set -# CONFIG_CRYPTO_SHA1 is not set -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_WP512 is not set +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_GHASH=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_RMD128=m +CONFIG_CRYPTO_RMD160=m +CONFIG_CRYPTO_RMD256=m +CONFIG_CRYPTO_RMD320=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_WP512=m # # Ciphers # -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_ARC4 is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_SALSA20 is not set -# CONFIG_CRYPTO_SEED is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_TWOFISH is not set +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_CAMELLIA=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_FCRYPT=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_SALSA20=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m # # Compression # -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_ZLIB is not set -# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_ZLIB=m +CONFIG_CRYPTO_LZO=m # # Random Number Generation # -# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_ANSI_CPRNG=m CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set -# CONFIG_BINARY_PRINTF is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1821,14 +2191,20 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=y CONFIG_CRC_T10DIF=y # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_LIBCRC32C=m CONFIG_AUDIT_GENERIC=y -CONFIG_ZLIB_INFLATE=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig index ddf67f63919..97382b698b9 100644 --- a/arch/mips/configs/pb1100_defconfig +++ b/arch/mips/configs/pb1100_defconfig @@ -1,79 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:37 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 09:53:29 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -CONFIG_MIPS_PB1100=y -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +CONFIG_MIPS_PB1100=y +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1100=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1100=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -107,184 +135,244 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-pb1100" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y +# CONFIG_PCMCIA_IOCTL is not set # # PC-card bridges # # CONFIG_PCMCIA_AU1X00 is not set - -# -# PCI Hotplug Support -# +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -295,110 +383,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -408,27 +411,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -437,25 +437,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -468,6 +468,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -493,14 +494,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PLATRAM is not set # @@ -517,166 +517,136 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_UB=y # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y # -# Misc devices +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +# CONFIG_IDE_PROC_FS is not set # -# ATA/ATAPI/MFM/RLL support +# IDE chipset support/bugfixes # -# CONFIG_IDE is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +# CONFIG_BLK_DEV_IDEDMA is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m +# CONFIG_VETH is not set +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_MIPS_AU1X00_ENET is not set +CONFIG_MII=y +# CONFIG_AX88796 is not set +CONFIG_MIPS_AU1X00_ENET=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# PCMCIA network device support -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -684,16 +654,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -703,28 +671,26 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set # # Serial drivers @@ -743,198 +709,288 @@ CONFIG_SERIAL_8250_AU1X00=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PPS support # +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# HID Devices -# -# CONFIG_HID is not set - -# -# USB support +# Console display driver support # +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# Real Time Clock +# OTG and related infrastructure # -# CONFIG_RTC_CLASS is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems @@ -953,69 +1009,76 @@ CONFIG_GENERIC_ACL=y # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +# CONFIG_JFFS2_FS_POSIX_ACL is not set +# CONFIG_JFFS2_FS_SECURITY is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set @@ -1055,34 +1118,71 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1090,67 +1190,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/pb1200_defconfig b/arch/mips/configs/pb1200_defconfig new file mode 100644 index 00000000000..e9ad77320f1 --- /dev/null +++ b/arch/mips/configs/pb1200_defconfig @@ -0,0 +1,1568 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33 +# Fri Feb 26 10:23:34 2010 +# +CONFIG_MIPS=y + +# +# Machine selection +# +CONFIG_MACH_ALCHEMY=y +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_POWERTV is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +CONFIG_MIPS_PB1200=y +# CONFIG_MIPS_PB1500 is not set +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1200=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +CONFIG_HZ_100=y +# CONFIG_HZ_128 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=100 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="-pb1200" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_MMU=y +CONFIG_PCCARD=y +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +# CONFIG_PCMCIA_IOCTL is not set + +# +# PC-card bridges +# +# CONFIG_PCMCIA_AU1X00 is not set +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=y +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_AU1550 is not set +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_UB=y +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +CONFIG_IDE=y + +# +# Please see Documentation/ide/ide.txt for help/info on IDE drives +# +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_ATAPI=y +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y +# CONFIG_BLK_DEV_IDETAPE is not set +CONFIG_IDE_TASK_IOCTL=y +# CONFIG_IDE_PROC_FS is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDE_AU1XXX=y +CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA=y +# CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA is not set +# CONFIG_BLK_DEV_IDEDMA is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_MIPS_AU1X00_ENET is not set +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set +CONFIG_SERIAL_8250_AU1X00=y + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_MAX3100 is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_AU1550=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_AU1550=y +CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +CONFIG_GPIO_SYSFS=y + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set + +# +# AC97 GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +CONFIG_HWMON_VID=y +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +CONFIG_SENSORS_ADM1025=y +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +CONFIG_SENSORS_LM70=y +# CONFIG_SENSORS_LM73 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set +# CONFIG_SENSORS_LIS3_I2C is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_AB4500_CORE is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_AU1200=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +CONFIG_FONTS=y +# CONFIG_FONT_8x8 is not set +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +CONFIG_SOUND=y +# CONFIG_SOUND_OSS_CORE is not set +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +CONFIG_SND_JACK=y +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set +CONFIG_SND_DYNAMIC_MINORS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set +CONFIG_SND_VMASTER=y +# CONFIG_SND_RAWMIDI_SEQ is not set +# CONFIG_SND_OPL3_LIB_SEQ is not set +# CONFIG_SND_OPL4_LIB_SEQ is not set +# CONFIG_SND_SBAWE_SEQ is not set +# CONFIG_SND_EMU10K1_SEQ is not set +CONFIG_SND_AC97_CODEC=y +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_SPI is not set +# CONFIG_SND_MIPS is not set +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set +CONFIG_SND_SOC=y +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_AU1XPSC=y +CONFIG_SND_SOC_AU1XPSC_I2S=y +CONFIG_SND_SOC_AU1XPSC_AC97=y +CONFIG_SND_SOC_DB1200=y +CONFIG_SND_SOC_I2C_AND_SPI=y +# CONFIG_SND_SOC_ALL_CODECS is not set +CONFIG_SND_SOC_AC97_CODEC=y +CONFIG_SND_SOC_WM8731=y +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +CONFIG_USB_DEBUG=y +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +# CONFIG_MMC_BLOCK_BOUNCE is not set +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_AU1X=y +# CONFIG_MMC_AT91 is not set +# CONFIG_MMC_ATMELMCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP3944 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set +# CONFIG_LEDS_LT3593 is not set + +# +# LED Triggers +# +CONFIG_LEDS_TRIGGERS=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set +# CONFIG_LEDS_TRIGGER_GPIO is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +CONFIG_NLS_CODEPAGE_1250=y +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=y +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttyS0,115200" +# CONFIG_CMDLINE_OVERRIDE is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y + +# +# Security options +# +CONFIG_KEYS=y +CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_SECURITY is not set +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig index 5ec60836b64..7497d3306b9 100644 --- a/arch/mips/configs/pb1500_defconfig +++ b/arch/mips/configs/pb1500_defconfig @@ -1,78 +1,102 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:37 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 10:05:27 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -CONFIG_MIPS_PB1500=y -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +CONFIG_MIPS_PB1500=y +# CONFIG_MIPS_PB1550 is not set +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1500=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1500=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -85,6 +109,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -92,11 +117,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -106,190 +134,255 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-pb1500" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y +# CONFIG_CARDBUS is not set # # PC-card bridges # # CONFIG_YENTA is not set -CONFIG_PD6729=m +# CONFIG_PD6729 is not set # CONFIG_I82092 is not set # CONFIG_PCMCIA_AU1X00 is not set -CONFIG_PCCARD_NONSTATIC=m - -# -# PCI Hotplug Support -# +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -300,110 +393,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -413,27 +421,24 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -442,25 +447,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -473,6 +478,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -498,14 +504,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -523,30 +529,20 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# LPDDR flash memory drivers # -# CONFIG_PARPORT is not set +# CONFIG_MTD_LPDDR is not set # -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -554,67 +550,66 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set # -# ATA/ATAPI/MFM/RLL support +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_UB=y +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_DELKIN is not set -# CONFIG_BLK_DEV_IDECD is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_TASK_IOCTL=y +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -624,82 +619,65 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# You can enable one or both FireWire driver stacks. # -# CONFIG_I2O is not set # -# Network device support +# The newer stack is recommended. # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=m +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -707,96 +685,51 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set +# CONFIG_WLAN is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# PCMCIA network device support -# -CONFIG_NET_PCMCIA=y -CONFIG_PCMCIA_3C589=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_PCMCIA_PCNET=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_PCMCIA_AXNET=m - -# -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -804,16 +737,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -823,33 +754,34 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -863,282 +795,450 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# PPS support # +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set -# CONFIG_FB is not set +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +CONFIG_FIRMWARE_EDID=y +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +CONFIG_FB_S1D13XXX=y +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set - -# -# HID Devices -# -# CONFIG_HID is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Console display driver support # +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set +CONFIG_USB_OTG_WHITELIST=y +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set # -# Real Time Clock +# OTG and related infrastructure # -# CONFIG_RTC_CLASS is not set +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set @@ -1155,10 +1255,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1168,38 +1268,75 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1207,67 +1344,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig index 6647642b5d9..aa526f53cb1 100644 --- a/arch/mips/configs/pb1550_defconfig +++ b/arch/mips/configs/pb1550_defconfig @@ -1,79 +1,103 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:37 2007 +# Linux kernel version: 2.6.33 +# Fri Feb 26 10:06:07 2010 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y CONFIG_MACH_ALCHEMY=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -CONFIG_MIPS_PB1550=y -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_AR7 is not set +# CONFIG_BCM47XX is not set +# CONFIG_BCM63XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_MACH_LOONGSON is not set # CONFIG_MIPS_MALTA is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set +# CONFIG_POWERTV is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set +CONFIG_ALCHEMY_GPIOINT_AU1000=y +# CONFIG_ALCHEMY_GPIO_INDIRECT is not set +# CONFIG_MIPS_MTX1 is not set +# CONFIG_MIPS_BOSPORUS is not set +# CONFIG_MIPS_DB1000 is not set +# CONFIG_MIPS_DB1100 is not set +# CONFIG_MIPS_DB1200 is not set +# CONFIG_MIPS_DB1500 is not set +# CONFIG_MIPS_DB1550 is not set +# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MIPS_PB1000 is not set +# CONFIG_MIPS_PB1100 is not set +# CONFIG_MIPS_PB1200 is not set +# CONFIG_MIPS_PB1500 is not set +CONFIG_MIPS_PB1550=y +# CONFIG_MIPS_XXS1500 is not set +CONFIG_SOC_AU1550=y +CONFIG_SOC_AU1X00=y +CONFIG_LOONGSON_UART_BASE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CSRC_R4K_LIB=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_SYS_HAS_EARLY_PRINTK=y CONFIG_MIPS_DISABLE_OBSOLETE_IDE=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_CPU_LITTLE_ENDIAN=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SOC_AU1550=y -CONFIG_SOC_AU1X00=y +CONFIG_IRQ_CPU=y CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2E is not set +# CONFIG_CPU_LOONGSON2F is not set CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -86,6 +110,7 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set # CONFIG_CPU_R6000 is not set # CONFIG_CPU_NEVADA is not set # CONFIG_CPU_R8000 is not set @@ -93,11 +118,14 @@ CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_SUPPORTS_ZBOOT=y CONFIG_SYS_HAS_CPU_MIPS32_R1=y CONFIG_CPU_MIPS32=y CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y # # Kernel type @@ -107,190 +135,255 @@ CONFIG_32BIT=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set CONFIG_64BIT_PHYS_ADDR=y +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_128 is not set # CONFIG_HZ_250 is not set # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=100 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set # CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION="-pb1550" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +# CONFIG_KERNEL_GZIP is not set +# CONFIG_KERNEL_BZIP2 is not set +CONFIG_KERNEL_LZMA=y +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_POSIX_MQUEUE_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +# CONFIG_TREE_RCU is not set +# CONFIG_TREE_PREEMPT_RCU is not set +CONFIG_TINY_RCU=y +# CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_SYSCTL_SYSCALL is not set +# CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 +# CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y # -# Loadable module support +# GCOV-based kernel profiling # +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y - -# -# Block layer -# +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set +CONFIG_LBDAF=y +CONFIG_BLK_DEV_BSG=y +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +CONFIG_FREEZER=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=m +CONFIG_PCCARD=y +CONFIG_PCMCIA=y CONFIG_PCMCIA_LOAD_CIS=y CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y +# CONFIG_CARDBUS is not set # # PC-card bridges # # CONFIG_YENTA is not set -CONFIG_PD6729=m +# CONFIG_PD6729 is not set # CONFIG_I82092 is not set # CONFIG_PCMCIA_AU1X00 is not set -CONFIG_PCCARD_NONSTATIC=m - -# -# PCI Hotplug Support -# +CONFIG_PCMCIA_ALCHEMY_DEVBOARD=y # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_TRAD_SIGNALS=y # # Power management options # -# CONFIG_PM is not set - -# -# Networking -# +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_HIBERNATION is not set +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set +CONFIG_PACKET_MMAP=y CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=m -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set +CONFIG_IP_PNP_RARP=y # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set @@ -301,110 +394,25 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_LRO=y +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_SECMARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m -CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +# CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -414,27 +422,30 @@ CONFIG_NF_CONNTRACK_PROC_COMPAT=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y +# CONFIG_DCB is not set # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_AF_RXRPC is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_LIB80211 is not set + +# +# CFG80211 needs to be enabled for MAC80211 +# +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -443,25 +454,25 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# +# CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -474,6 +485,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -499,14 +511,14 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_ALCHEMY=y +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -524,30 +536,30 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_AU1550=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support +# LPDDR flash memory drivers # -# CONFIG_PNPACPI is not set +# CONFIG_MTD_LPDDR is not set # -# Block devices +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -555,67 +567,66 @@ CONFIG_MTD_ALCHEMY=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m # -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_UB=y +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_XFER_MODE=y +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECS=m -# CONFIG_BLK_DEV_DELKIN is not set -# CONFIG_BLK_DEV_IDECD is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set +CONFIG_BLK_DEV_IDECS=y +CONFIG_BLK_DEV_IDECD=y +# CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set +CONFIG_BLK_DEV_IDEDMA_SFF=y + +# +# PCI IDE chipsets support +# CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_IDEPCI_PCIBUS_ORDER is not set # CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_GENERIC is not set # CONFIG_BLK_DEV_OPTI621 is not set CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set CONFIG_BLK_DEV_HPT366=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m +# CONFIG_BLK_DEV_IT8172 is not set +# CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set @@ -625,82 +636,65 @@ CONFIG_BLK_DEV_IT8213=m # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # -CONFIG_RAID_ATTRS=m +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# You can enable one or both FireWire driver stacks. # -# CONFIG_I2O is not set # -# Network device support +# The newer stack is recommended. # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y +# CONFIG_AX88796 is not set CONFIG_MIPS_AU1X00_ENET=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set @@ -708,88 +702,51 @@ CONFIG_MIPS_AU1X00_ENET=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# +# CONFIG_ETHOC is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_ATL2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set +# CONFIG_WLAN is not set # -# Wireless LAN (non-hamradio) +# Enable WiMAX (Networking options) to see the WiMAX drivers # -# CONFIG_NET_RADIO is not set # -# PCMCIA network device support +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_NET_PCMCIA is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -# CONFIG_PPP_SYNC_TTY is not set -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m +# CONFIG_PPP is not set # CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# +# CONFIG_VMXNET3 is not set # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -797,16 +754,14 @@ CONFIG_SLHC=m # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set @@ -816,33 +771,34 @@ CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=m +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -# CONFIG_VT is not set +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_AU1X00_GPIO is not set +# CONFIG_NOZOMI is not set # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_PCI=y +# CONFIG_SERIAL_8250_PCI is not set # CONFIG_SERIAL_8250_CS is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -856,282 +812,492 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +# CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # # PCMCIA character devices # -CONFIG_SYNCLINK_CS=m +# CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y +# CONFIG_I2C_HELPER_AUTO is not set # -# TPM devices +# I2C Algorithms # -# CONFIG_TCG_TPM is not set +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set # -# I2C support +# I2C Hardware Bus support # -# CONFIG_I2C is not set # -# SPI support +# PC SMBus host controller drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set # -# Dallas's 1-wire bus +# I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_W1 is not set +CONFIG_I2C_AU1550=y +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # -# Hardware Monitoring support +# Other I2C/SMBus bus drivers # +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # -# Multimedia devices +# Sonics Silicon Backplane # -# CONFIG_VIDEO_DEV is not set +# CONFIG_SSB is not set # -# Digital Video Broadcasting Devices +# Multifunction device drivers # -# CONFIG_DVB is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_REGULATOR is not set +# CONFIG_MEDIA_SUPPORT is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_VGA_ARB is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices +# Display device support # -# CONFIG_HID is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Console display driver support # +CONFIG_VGA_CONSOLE=y +# CONFIG_VGACON_SOFT_SCROLLBACK is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HIDRAW=y + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +CONFIG_USB_HIDDEV=y + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Miscellaneous USB options # +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +CONFIG_USB_DYNAMIC_MINORS=y +CONFIG_USB_SUSPEND=y +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # -# USB Gadget Support +# USB Host Controller Drivers # -# CONFIG_USB_GADGET is not set +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_XHCI_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # -# MMC/SD Card support +# USB Device Class drivers # -# CONFIG_MMC is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# LED devices +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # -# CONFIG_NEW_LEDS is not set # -# LED drivers +# also be needed; see USB_STORAGE Help for more info # +# CONFIG_USB_LIBUSUAL is not set # -# LED Triggers +# USB Imaging devices # +# CONFIG_USB_MDC800 is not set # -# InfiniBand support +# USB port drivers # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_SERIAL is not set # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# Real Time Clock +# RTC interfaces # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Engine support +# I2C RTC drivers # -# CONFIG_DMA_ENGINE is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Auxiliary Display support +# on-CPU RTC drivers # +CONFIG_RTC_DRV_AU1XXX=y +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set # -# Virtualization +# TI VLYNQ # +# CONFIG_STAGING is not set # # File systems # CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set -CONFIG_FS_POSIX_ACL=y +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_GENERIC_ACL=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set # # CD-ROM/DVD Filesystems # -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_UDF_NLS=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y +# CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +# CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SYSFS=y CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -CONFIG_CRAMFS=m +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y -CONFIG_EXPORTFS=m +CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=m +CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_CODEPAGE_852=y # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set @@ -1148,10 +1314,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set +CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -1161,38 +1327,75 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set +CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set +CONFIG_STRIP_ASM_SYMS=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +# CONFIG_DETECT_SOFTLOCKUP is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_SCHED_DEBUG is not set +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_EARLY_PRINTK=y # CONFIG_CMDLINE_BOOL is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_RUNTIME_DEBUG is not set +CONFIG_DEBUG_ZBOOT=y # # Security options @@ -1200,67 +1403,32 @@ CONFIG_CROSSCOMPILE=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_SECURITYFS=y +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set # # Library routines # CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/dec/kn01-berr.c b/arch/mips/dec/kn01-berr.c index b0dc6d53edd..94d23b4a7dc 100644 --- a/arch/mips/dec/kn01-berr.c +++ b/arch/mips/dec/kn01-berr.c @@ -46,7 +46,7 @@ * There is no default value -- it has to be initialized. */ u16 cached_kn01_csr; -DEFINE_SPINLOCK(kn01_lock); +static DEFINE_RAW_SPINLOCK(kn01_lock); static inline void dec_kn01_be_ack(void) @@ -54,12 +54,12 @@ static inline void dec_kn01_be_ack(void) volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); unsigned long flags; - spin_lock_irqsave(&kn01_lock, flags); + raw_spin_lock_irqsave(&kn01_lock, flags); *csr = cached_kn01_csr | KN01_CSR_MEMERR; /* Clear bus IRQ. */ iob(); - spin_unlock_irqrestore(&kn01_lock, flags); + raw_spin_unlock_irqrestore(&kn01_lock, flags); } static int dec_kn01_be_backend(struct pt_regs *regs, int is_fixup, int invoker) @@ -182,7 +182,7 @@ void __init dec_kn01_be_init(void) volatile u16 *csr = (void *)CKSEG1ADDR(KN01_SLOT_BASE + KN01_CSR); unsigned long flags; - spin_lock_irqsave(&kn01_lock, flags); + raw_spin_lock_irqsave(&kn01_lock, flags); /* Preset write-only bits of the Control Register cache. */ cached_kn01_csr = *csr; @@ -194,7 +194,7 @@ void __init dec_kn01_be_init(void) *csr = cached_kn01_csr; iob(); - spin_unlock_irqrestore(&kn01_lock, flags); + raw_spin_unlock_irqrestore(&kn01_lock, flags); /* Clear any leftover errors from the firmware. */ dec_kn01_be_ack(); diff --git a/arch/mips/dec/prom/locore.S b/arch/mips/dec/prom/locore.S index d9acdcefee8..f72b5741025 100644 --- a/arch/mips/dec/prom/locore.S +++ b/arch/mips/dec/prom/locore.S @@ -27,4 +27,3 @@ NESTED(genexcept_early, 0, sp) jr k0 rfe END(genexcept_early) - diff --git a/arch/mips/include/asm/atomic.h b/arch/mips/include/asm/atomic.h index dd75d673447..519197ede08 100644 --- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -137,7 +137,7 @@ static __inline__ int atomic_add_return(int i, atomic_t * v) { int result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; @@ -189,7 +189,7 @@ static __inline__ int atomic_sub_return(int i, atomic_t * v) { int result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; @@ -249,7 +249,7 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) { int result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { int temp; @@ -516,7 +516,7 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v) { long result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; @@ -568,7 +568,7 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { long result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; @@ -628,7 +628,7 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) { long result; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { long temp; @@ -788,9 +788,9 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) * atomic*_return operations are serializing but not the non-*_return * versions. */ -#define smp_mb__before_atomic_dec() smp_llsc_mb() +#define smp_mb__before_atomic_dec() smp_mb__before_llsc() #define smp_mb__after_atomic_dec() smp_llsc_mb() -#define smp_mb__before_atomic_inc() smp_llsc_mb() +#define smp_mb__before_atomic_inc() smp_mb__before_llsc() #define smp_mb__after_atomic_inc() smp_llsc_mb() #include <asm-generic/atomic-long.h> diff --git a/arch/mips/include/asm/barrier.h b/arch/mips/include/asm/barrier.h index 8e9ac313ca3..c0884f02d3a 100644 --- a/arch/mips/include/asm/barrier.h +++ b/arch/mips/include/asm/barrier.h @@ -88,12 +88,20 @@ : /* no output */ \ : "m" (*(int *)CKSEG1) \ : "memory") - -#define fast_wmb() __sync() -#define fast_rmb() __sync() -#define fast_mb() __sync() -#ifdef CONFIG_SGI_IP28 -#define fast_iob() \ +#ifdef CONFIG_CPU_CAVIUM_OCTEON +# define OCTEON_SYNCW_STR ".set push\n.set arch=octeon\nsyncw\nsyncw\n.set pop\n" +# define __syncw() __asm__ __volatile__(OCTEON_SYNCW_STR : : : "memory") + +# define fast_wmb() __syncw() +# define fast_rmb() barrier() +# define fast_mb() __sync() +# define fast_iob() do { } while (0) +#else /* ! CONFIG_CPU_CAVIUM_OCTEON */ +# define fast_wmb() __sync() +# define fast_rmb() __sync() +# define fast_mb() __sync() +# ifdef CONFIG_SGI_IP28 +# define fast_iob() \ __asm__ __volatile__( \ ".set push\n\t" \ ".set noreorder\n\t" \ @@ -104,13 +112,14 @@ : /* no output */ \ : "m" (*(int *)CKSEG1ADDR(0x1fa00004)) \ : "memory") -#else -#define fast_iob() \ +# else +# define fast_iob() \ do { \ __sync(); \ __fast_iob(); \ } while (0) -#endif +# endif +#endif /* CONFIG_CPU_CAVIUM_OCTEON */ #ifdef CONFIG_CPU_HAS_WB @@ -131,25 +140,42 @@ #endif /* !CONFIG_CPU_HAS_WB */ #if defined(CONFIG_WEAK_ORDERING) && defined(CONFIG_SMP) -#define __WEAK_ORDERING_MB " sync \n" +# ifdef CONFIG_CPU_CAVIUM_OCTEON +# define smp_mb() __sync() +# define smp_rmb() barrier() +# define smp_wmb() __syncw() +# else +# define smp_mb() __asm__ __volatile__("sync" : : :"memory") +# define smp_rmb() __asm__ __volatile__("sync" : : :"memory") +# define smp_wmb() __asm__ __volatile__("sync" : : :"memory") +# endif #else -#define __WEAK_ORDERING_MB " \n" +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() #endif + #if defined(CONFIG_WEAK_REORDERING_BEYOND_LLSC) && defined(CONFIG_SMP) #define __WEAK_LLSC_MB " sync \n" #else #define __WEAK_LLSC_MB " \n" #endif -#define smp_mb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") -#define smp_rmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") -#define smp_wmb() __asm__ __volatile__(__WEAK_ORDERING_MB : : :"memory") - #define set_mb(var, value) \ do { var = value; smp_mb(); } while (0) #define smp_llsc_mb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define smp_llsc_rmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") -#define smp_llsc_wmb() __asm__ __volatile__(__WEAK_LLSC_MB : : :"memory") + +#ifdef CONFIG_CPU_CAVIUM_OCTEON +#define smp_mb__before_llsc() smp_wmb() +/* Cause previous writes to become visible on all CPUs as soon as possible */ +#define nudge_writes() __asm__ __volatile__(".set push\n\t" \ + ".set arch=octeon\n\t" \ + "syncw\n\t" \ + ".set pop" : : : "memory") +#else +#define smp_mb__before_llsc() smp_llsc_mb() +#define nudge_writes() mb() +#endif #endif /* __ASM_BARRIER_H */ diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 84a383806b2..9255cfbee45 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -42,7 +42,7 @@ /* * clear_bit() doesn't provide any barrier for the compiler. */ -#define smp_mb__before_clear_bit() smp_llsc_mb() +#define smp_mb__before_clear_bit() smp_mb__before_llsc() #define smp_mb__after_clear_bit() smp_llsc_mb() /* @@ -258,7 +258,7 @@ static inline int test_and_set_bit(unsigned long nr, unsigned short bit = nr & SZLONG_MASK; unsigned long res; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); @@ -395,7 +395,7 @@ static inline int test_and_clear_bit(unsigned long nr, unsigned short bit = nr & SZLONG_MASK; unsigned long res; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); @@ -485,7 +485,7 @@ static inline int test_and_change_bit(unsigned long nr, unsigned short bit = nr & SZLONG_MASK; unsigned long res; - smp_llsc_mb(); + smp_mb__before_llsc(); if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long *m = ((unsigned long *) addr) + (nr >> SZLONG_LOG); diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 815a438a268..ed9aaaaf074 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -72,14 +72,14 @@ */ extern void __cmpxchg_called_with_bad_pointer(void); -#define __cmpxchg(ptr, old, new, barrier) \ +#define __cmpxchg(ptr, old, new, pre_barrier, post_barrier) \ ({ \ __typeof__(ptr) __ptr = (ptr); \ __typeof__(*(ptr)) __old = (old); \ __typeof__(*(ptr)) __new = (new); \ __typeof__(*(ptr)) __res = 0; \ \ - barrier; \ + pre_barrier; \ \ switch (sizeof(*(__ptr))) { \ case 4: \ @@ -96,13 +96,13 @@ extern void __cmpxchg_called_with_bad_pointer(void); break; \ } \ \ - barrier; \ + post_barrier; \ \ __res; \ }) -#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_llsc_mb()) -#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, ) +#define cmpxchg(ptr, old, new) __cmpxchg(ptr, old, new, smp_mb__before_llsc(), smp_llsc_mb()) +#define cmpxchg_local(ptr, old, new) __cmpxchg(ptr, old, new, , ) #define cmpxchg64(ptr, o, n) \ ({ \ diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h index 272c5ef35bb..ac73cede3a0 100644 --- a/arch/mips/include/asm/cpu-features.h +++ b/arch/mips/include/asm/cpu-features.h @@ -95,6 +95,9 @@ #ifndef cpu_has_smartmips #define cpu_has_smartmips (cpu_data[0].ases & MIPS_ASE_SMARTMIPS) #endif +#ifndef kernel_uses_smartmips_rixi +#define kernel_uses_smartmips_rixi 0 +#endif #ifndef cpu_has_vtag_icache #define cpu_has_vtag_icache (cpu_data[0].icache.flags & MIPS_CACHE_VTAG) #endif diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index cf373a95fe4..a5acda41694 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -224,7 +224,7 @@ enum cpu_type_enum { * MIPS64 class processors */ CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, - CPU_CAVIUM_OCTEON, + CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_LAST }; diff --git a/arch/mips/include/asm/current.h b/arch/mips/include/asm/current.h index 559db66b979..4c51401b553 100644 --- a/arch/mips/include/asm/current.h +++ b/arch/mips/include/asm/current.h @@ -1,23 +1 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1998, 2002 Ralf Baechle - * Copyright (C) 1999 Silicon Graphics, Inc. - */ -#ifndef _ASM_CURRENT_H -#define _ASM_CURRENT_H - -#include <linux/thread_info.h> - -struct task_struct; - -static inline struct task_struct * get_current(void) -{ - return current_thread_info()->task; -} - -#define current get_current() - -#endif /* _ASM_CURRENT_H */ +#include <asm-generic/current.h> diff --git a/arch/mips/include/asm/dec/kn01.h b/arch/mips/include/asm/dec/kn01.h index 28fa717ac42..88d9ffd7425 100644 --- a/arch/mips/include/asm/dec/kn01.h +++ b/arch/mips/include/asm/dec/kn01.h @@ -80,7 +80,6 @@ struct pt_regs; extern u16 cached_kn01_csr; -extern spinlock_t kn01_lock; extern void dec_kn01_be_init(void); extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup); diff --git a/arch/mips/include/asm/device.h b/arch/mips/include/asm/device.h index d8f9872b0e2..06746c5e809 100644 --- a/arch/mips/include/asm/device.h +++ b/arch/mips/include/asm/device.h @@ -4,4 +4,3 @@ * This file is released under the GPLv2 */ #include <asm-generic/device.h> - diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h index 7a6a35dbe52..e53d7bed5cd 100644 --- a/arch/mips/include/asm/elf.h +++ b/arch/mips/include/asm/elf.h @@ -334,14 +334,14 @@ extern int dump_task_fpu(struct task_struct *, elf_fpregset_t *); #define ELF_HWCAP (0) -/* This yields a string that ld.so will use to load implementation - specific libraries for optimization. This is more specific in - intent than poking at uname or /proc/cpuinfo. - - For the moment, we have only optimizations for the Intel generations, - but that could change... */ +/* + * This yields a string that ld.so will use to load implementation + * specific libraries for optimization. This is more specific in + * intent than poking at uname or /proc/cpuinfo. + */ -#define ELF_PLATFORM (NULL) +#define ELF_PLATFORM __elf_platform +extern const char *__elf_platform; /* * See comments in asm-alpha/elf.h, this is the same thing diff --git a/arch/mips/include/asm/ftrace.h b/arch/mips/include/asm/ftrace.h index 3986cd8704f..ce35c9af0c2 100644 --- a/arch/mips/include/asm/ftrace.h +++ b/arch/mips/include/asm/ftrace.h @@ -4,7 +4,7 @@ * more details. * * Copyright (C) 2009 DSLab, Lanzhou University, China - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ #ifndef _ASM_MIPS_FTRACE_H diff --git a/arch/mips/include/asm/i8259.h b/arch/mips/include/asm/i8259.h index 8572a2d9048..c7e278447c0 100644 --- a/arch/mips/include/asm/i8259.h +++ b/arch/mips/include/asm/i8259.h @@ -35,7 +35,7 @@ #define SLAVE_ICW4_DEFAULT 0x01 #define PIC_ICW4_AEOI 2 -extern spinlock_t i8259A_lock; +extern raw_spinlock_t i8259A_lock; extern int i8259A_irq_pending(unsigned int irq); extern void make_8259A_irq(unsigned int irq); @@ -51,7 +51,7 @@ static inline int i8259_irq(void) { int irq; - spin_lock(&i8259A_lock); + raw_spin_lock(&i8259A_lock); /* Perform an interrupt acknowledge cycle on controller 1. */ outb(0x0C, PIC_MASTER_CMD); /* prepare for poll */ @@ -78,7 +78,7 @@ static inline int i8259_irq(void) irq = -1; } - spin_unlock(&i8259A_lock); + raw_spin_unlock(&i8259A_lock); return likely(irq >= 0) ? irq + I8259A_IRQ_BASE : irq; } diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index 436878e4e06..c98bf514ec7 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -447,6 +447,24 @@ __BUILDIO(q, u64) #define readl_relaxed readl #define readq_relaxed readq +#define readb_be(addr) \ + __raw_readb((__force unsigned *)(addr)) +#define readw_be(addr) \ + be16_to_cpu(__raw_readw((__force unsigned *)(addr))) +#define readl_be(addr) \ + be32_to_cpu(__raw_readl((__force unsigned *)(addr))) +#define readq_be(addr) \ + be64_to_cpu(__raw_readq((__force unsigned *)(addr))) + +#define writeb_be(val, addr) \ + __raw_writeb((val), (__force unsigned *)(addr)) +#define writew_be(val, addr) \ + __raw_writew(cpu_to_be16((val)), (__force unsigned *)(addr)) +#define writel_be(val, addr) \ + __raw_writel(cpu_to_be32((val)), (__force unsigned *)(addr)) +#define writeq_be(val, addr) \ + __raw_writeq(cpu_to_be64((val)), (__force unsigned *)(addr)) + /* * Some code tests for these symbols */ diff --git a/arch/mips/include/asm/mach-ar7/ar7.h b/arch/mips/include/asm/mach-ar7/ar7.h index 21cbbc70644..f1cf3894349 100644 --- a/arch/mips/include/asm/mach-ar7/ar7.h +++ b/arch/mips/include/asm/mach-ar7/ar7.h @@ -105,26 +105,9 @@ static inline u8 ar7_chip_rev(void) return (readl((void *)KSEG1ADDR(AR7_REGS_GPIO + 0x14)) >> 16) & 0xff; } -static inline int ar7_cpu_freq(void) -{ - return ar7_cpu_clock; -} - -static inline int ar7_bus_freq(void) -{ - return ar7_bus_clock; -} - -static inline int ar7_vbus_freq(void) -{ - return ar7_bus_clock / 2; -} -#define ar7_cpmac_freq ar7_vbus_freq - -static inline int ar7_dsp_freq(void) -{ - return ar7_dsp_clock; -} +struct clk { + unsigned int rate; +}; static inline int ar7_has_high_cpmac(void) { diff --git a/arch/mips/include/asm/mach-ar7/gpio.h b/arch/mips/include/asm/mach-ar7/gpio.h index cbe9c4f126d..73f9b162c97 100644 --- a/arch/mips/include/asm/mach-ar7/gpio.h +++ b/arch/mips/include/asm/mach-ar7/gpio.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> + * Copyright (C) 2007-2009 Florian Fainelli <florian@openwrt.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -22,88 +22,18 @@ #include <asm/mach-ar7/ar7.h> #define AR7_GPIO_MAX 32 +#define NR_BUILTIN_GPIO AR7_GPIO_MAX -extern int gpio_request(unsigned gpio, const char *label); -extern void gpio_free(unsigned gpio); +#define gpio_to_irq(gpio) NULL -/* Common GPIO layer */ -static inline int gpio_get_value(unsigned gpio) -{ - void __iomem *gpio_in = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_INPUT); +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value - return readl(gpio_in) & (1 << gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - void __iomem *gpio_out = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_OUTPUT); - unsigned tmp; - - tmp = readl(gpio_out) & ~(1 << gpio); - if (value) - tmp |= 1 << gpio; - writel(tmp, gpio_out); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - void __iomem *gpio_dir = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - writel(readl(gpio_dir) | (1 << gpio), gpio_dir); - - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - void __iomem *gpio_dir = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_DIR); - - if (gpio >= AR7_GPIO_MAX) - return -EINVAL; - - gpio_set_value(gpio, value); - writel(readl(gpio_dir) & ~(1 << gpio), gpio_dir); - - return 0; -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} +#define gpio_cansleep __gpio_cansleep /* Board specific GPIO functions */ -static inline int ar7_gpio_enable(unsigned gpio) -{ - void __iomem *gpio_en = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); - - writel(readl(gpio_en) | (1 << gpio), gpio_en); - - return 0; -} - -static inline int ar7_gpio_disable(unsigned gpio) -{ - void __iomem *gpio_en = - (void __iomem *)KSEG1ADDR(AR7_REGS_GPIO + AR7_GPIO_ENABLE); - - writel(readl(gpio_en) & ~(1 << gpio), gpio_en); - - return 0; -} +int ar7_gpio_enable(unsigned gpio); +int ar7_gpio_disable(unsigned gpio); #include <asm-generic/gpio.h> diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h index 854e95f1b07..ae07423e6e8 100644 --- a/arch/mips/include/asm/mach-au1x00/au1000.h +++ b/arch/mips/include/asm/mach-au1x00/au1000.h @@ -130,6 +130,56 @@ static inline int au1xxx_cpu_needs_config_od(void) return 0; } +#define ALCHEMY_CPU_UNKNOWN -1 +#define ALCHEMY_CPU_AU1000 0 +#define ALCHEMY_CPU_AU1500 1 +#define ALCHEMY_CPU_AU1100 2 +#define ALCHEMY_CPU_AU1550 3 +#define ALCHEMY_CPU_AU1200 4 + +static inline int alchemy_get_cputype(void) +{ + switch (read_c0_prid() & 0xffff0000) { + case 0x00030000: + return ALCHEMY_CPU_AU1000; + break; + case 0x01030000: + return ALCHEMY_CPU_AU1500; + break; + case 0x02030000: + return ALCHEMY_CPU_AU1100; + break; + case 0x03030000: + return ALCHEMY_CPU_AU1550; + break; + case 0x04030000: + case 0x05030000: + return ALCHEMY_CPU_AU1200; + break; + } + + return ALCHEMY_CPU_UNKNOWN; +} + +static inline void alchemy_uart_putchar(u32 uart_phys, u8 c) +{ + void __iomem *base = (void __iomem *)KSEG1ADDR(uart_phys); + int timeout, i; + + /* check LSR TX_EMPTY bit */ + timeout = 0xffffff; + do { + if (__raw_readl(base + 0x1c) & 0x20) + break; + /* slow down */ + for (i = 10000; i; i--) + asm volatile ("nop"); + } while (--timeout); + + __raw_writel(c, base + 0x04); /* tx */ + wmb(); +} + /* arch/mips/au1000/common/clocks.c */ extern void set_au1x00_speed(unsigned int new_freq); extern unsigned int get_au1x00_speed(void); @@ -143,20 +193,332 @@ void au_sleep(void); void save_au1xxx_intctl(void); void restore_au1xxx_intctl(void); -/* - * Every board describes its IRQ mapping with this table. - */ -struct au1xxx_irqmap { - int im_irq; - int im_type; - int im_request; + +/* SOC Interrupt numbers */ + +#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) +#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) +#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_LAST + 1) +#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) +#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST + +enum soc_au1000_ints { + AU1000_FIRST_INT = AU1000_INTC0_INT_BASE, + AU1000_UART0_INT = AU1000_FIRST_INT, + AU1000_UART1_INT, + AU1000_UART2_INT, + AU1000_UART3_INT, + AU1000_SSI0_INT, + AU1000_SSI1_INT, + AU1000_DMA_INT_BASE, + + AU1000_TOY_INT = AU1000_FIRST_INT + 14, + AU1000_TOY_MATCH0_INT, + AU1000_TOY_MATCH1_INT, + AU1000_TOY_MATCH2_INT, + AU1000_RTC_INT, + AU1000_RTC_MATCH0_INT, + AU1000_RTC_MATCH1_INT, + AU1000_RTC_MATCH2_INT, + AU1000_IRDA_TX_INT, + AU1000_IRDA_RX_INT, + AU1000_USB_DEV_REQ_INT, + AU1000_USB_DEV_SUS_INT, + AU1000_USB_HOST_INT, + AU1000_ACSYNC_INT, + AU1000_MAC0_DMA_INT, + AU1000_MAC1_DMA_INT, + AU1000_I2S_UO_INT, + AU1000_AC97C_INT, + AU1000_GPIO0_INT, + AU1000_GPIO1_INT, + AU1000_GPIO2_INT, + AU1000_GPIO3_INT, + AU1000_GPIO4_INT, + AU1000_GPIO5_INT, + AU1000_GPIO6_INT, + AU1000_GPIO7_INT, + AU1000_GPIO8_INT, + AU1000_GPIO9_INT, + AU1000_GPIO10_INT, + AU1000_GPIO11_INT, + AU1000_GPIO12_INT, + AU1000_GPIO13_INT, + AU1000_GPIO14_INT, + AU1000_GPIO15_INT, + AU1000_GPIO16_INT, + AU1000_GPIO17_INT, + AU1000_GPIO18_INT, + AU1000_GPIO19_INT, + AU1000_GPIO20_INT, + AU1000_GPIO21_INT, + AU1000_GPIO22_INT, + AU1000_GPIO23_INT, + AU1000_GPIO24_INT, + AU1000_GPIO25_INT, + AU1000_GPIO26_INT, + AU1000_GPIO27_INT, + AU1000_GPIO28_INT, + AU1000_GPIO29_INT, + AU1000_GPIO30_INT, + AU1000_GPIO31_INT, }; -/* core calls this function to let boards initialize other IRQ sources */ -void board_init_irq(void); +enum soc_au1100_ints { + AU1100_FIRST_INT = AU1000_INTC0_INT_BASE, + AU1100_UART0_INT = AU1100_FIRST_INT, + AU1100_UART1_INT, + AU1100_SD_INT, + AU1100_UART3_INT, + AU1100_SSI0_INT, + AU1100_SSI1_INT, + AU1100_DMA_INT_BASE, + + AU1100_TOY_INT = AU1100_FIRST_INT + 14, + AU1100_TOY_MATCH0_INT, + AU1100_TOY_MATCH1_INT, + AU1100_TOY_MATCH2_INT, + AU1100_RTC_INT, + AU1100_RTC_MATCH0_INT, + AU1100_RTC_MATCH1_INT, + AU1100_RTC_MATCH2_INT, + AU1100_IRDA_TX_INT, + AU1100_IRDA_RX_INT, + AU1100_USB_DEV_REQ_INT, + AU1100_USB_DEV_SUS_INT, + AU1100_USB_HOST_INT, + AU1100_ACSYNC_INT, + AU1100_MAC0_DMA_INT, + AU1100_GPIO208_215_INT, + AU1100_LCD_INT, + AU1100_AC97C_INT, + AU1100_GPIO0_INT, + AU1100_GPIO1_INT, + AU1100_GPIO2_INT, + AU1100_GPIO3_INT, + AU1100_GPIO4_INT, + AU1100_GPIO5_INT, + AU1100_GPIO6_INT, + AU1100_GPIO7_INT, + AU1100_GPIO8_INT, + AU1100_GPIO9_INT, + AU1100_GPIO10_INT, + AU1100_GPIO11_INT, + AU1100_GPIO12_INT, + AU1100_GPIO13_INT, + AU1100_GPIO14_INT, + AU1100_GPIO15_INT, + AU1100_GPIO16_INT, + AU1100_GPIO17_INT, + AU1100_GPIO18_INT, + AU1100_GPIO19_INT, + AU1100_GPIO20_INT, + AU1100_GPIO21_INT, + AU1100_GPIO22_INT, + AU1100_GPIO23_INT, + AU1100_GPIO24_INT, + AU1100_GPIO25_INT, + AU1100_GPIO26_INT, + AU1100_GPIO27_INT, + AU1100_GPIO28_INT, + AU1100_GPIO29_INT, + AU1100_GPIO30_INT, + AU1100_GPIO31_INT, +}; -/* boards call this to register additional (GPIO) interrupts */ -void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count); +enum soc_au1500_ints { + AU1500_FIRST_INT = AU1000_INTC0_INT_BASE, + AU1500_UART0_INT = AU1500_FIRST_INT, + AU1500_PCI_INTA, + AU1500_PCI_INTB, + AU1500_UART3_INT, + AU1500_PCI_INTC, + AU1500_PCI_INTD, + AU1500_DMA_INT_BASE, + + AU1500_TOY_INT = AU1500_FIRST_INT + 14, + AU1500_TOY_MATCH0_INT, + AU1500_TOY_MATCH1_INT, + AU1500_TOY_MATCH2_INT, + AU1500_RTC_INT, + AU1500_RTC_MATCH0_INT, + AU1500_RTC_MATCH1_INT, + AU1500_RTC_MATCH2_INT, + AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, + AU1500_USB_DEV_REQ_INT, + AU1500_USB_DEV_SUS_INT, + AU1500_USB_HOST_INT, + AU1500_ACSYNC_INT, + AU1500_MAC0_DMA_INT, + AU1500_MAC1_DMA_INT, + AU1500_AC97C_INT = AU1500_FIRST_INT + 31, + AU1500_GPIO0_INT, + AU1500_GPIO1_INT, + AU1500_GPIO2_INT, + AU1500_GPIO3_INT, + AU1500_GPIO4_INT, + AU1500_GPIO5_INT, + AU1500_GPIO6_INT, + AU1500_GPIO7_INT, + AU1500_GPIO8_INT, + AU1500_GPIO9_INT, + AU1500_GPIO10_INT, + AU1500_GPIO11_INT, + AU1500_GPIO12_INT, + AU1500_GPIO13_INT, + AU1500_GPIO14_INT, + AU1500_GPIO15_INT, + AU1500_GPIO200_INT, + AU1500_GPIO201_INT, + AU1500_GPIO202_INT, + AU1500_GPIO203_INT, + AU1500_GPIO20_INT, + AU1500_GPIO204_INT, + AU1500_GPIO205_INT, + AU1500_GPIO23_INT, + AU1500_GPIO24_INT, + AU1500_GPIO25_INT, + AU1500_GPIO26_INT, + AU1500_GPIO27_INT, + AU1500_GPIO28_INT, + AU1500_GPIO206_INT, + AU1500_GPIO207_INT, + AU1500_GPIO208_215_INT, +}; + +enum soc_au1550_ints { + AU1550_FIRST_INT = AU1000_INTC0_INT_BASE, + AU1550_UART0_INT = AU1550_FIRST_INT, + AU1550_PCI_INTA, + AU1550_PCI_INTB, + AU1550_DDMA_INT, + AU1550_CRYPTO_INT, + AU1550_PCI_INTC, + AU1550_PCI_INTD, + AU1550_PCI_RST_INT, + AU1550_UART1_INT, + AU1550_UART3_INT, + AU1550_PSC0_INT, + AU1550_PSC1_INT, + AU1550_PSC2_INT, + AU1550_PSC3_INT, + AU1550_TOY_INT, + AU1550_TOY_MATCH0_INT, + AU1550_TOY_MATCH1_INT, + AU1550_TOY_MATCH2_INT, + AU1550_RTC_INT, + AU1550_RTC_MATCH0_INT, + AU1550_RTC_MATCH1_INT, + AU1550_RTC_MATCH2_INT, + + AU1550_NAND_INT = AU1550_FIRST_INT + 23, + AU1550_USB_DEV_REQ_INT, + AU1550_USB_DEV_SUS_INT, + AU1550_USB_HOST_INT, + AU1550_MAC0_DMA_INT, + AU1550_MAC1_DMA_INT, + AU1550_GPIO0_INT = AU1550_FIRST_INT + 32, + AU1550_GPIO1_INT, + AU1550_GPIO2_INT, + AU1550_GPIO3_INT, + AU1550_GPIO4_INT, + AU1550_GPIO5_INT, + AU1550_GPIO6_INT, + AU1550_GPIO7_INT, + AU1550_GPIO8_INT, + AU1550_GPIO9_INT, + AU1550_GPIO10_INT, + AU1550_GPIO11_INT, + AU1550_GPIO12_INT, + AU1550_GPIO13_INT, + AU1550_GPIO14_INT, + AU1550_GPIO15_INT, + AU1550_GPIO200_INT, + AU1550_GPIO201_205_INT, /* Logical or of GPIO201:205 */ + AU1550_GPIO16_INT, + AU1550_GPIO17_INT, + AU1550_GPIO20_INT, + AU1550_GPIO21_INT, + AU1550_GPIO22_INT, + AU1550_GPIO23_INT, + AU1550_GPIO24_INT, + AU1550_GPIO25_INT, + AU1550_GPIO26_INT, + AU1550_GPIO27_INT, + AU1550_GPIO28_INT, + AU1550_GPIO206_INT, + AU1550_GPIO207_INT, + AU1550_GPIO208_215_INT, /* Logical or of GPIO208:215 */ +}; + +enum soc_au1200_ints { + AU1200_FIRST_INT = AU1000_INTC0_INT_BASE, + AU1200_UART0_INT = AU1200_FIRST_INT, + AU1200_SWT_INT, + AU1200_SD_INT, + AU1200_DDMA_INT, + AU1200_MAE_BE_INT, + AU1200_GPIO200_INT, + AU1200_GPIO201_INT, + AU1200_GPIO202_INT, + AU1200_UART1_INT, + AU1200_MAE_FE_INT, + AU1200_PSC0_INT, + AU1200_PSC1_INT, + AU1200_AES_INT, + AU1200_CAMERA_INT, + AU1200_TOY_INT, + AU1200_TOY_MATCH0_INT, + AU1200_TOY_MATCH1_INT, + AU1200_TOY_MATCH2_INT, + AU1200_RTC_INT, + AU1200_RTC_MATCH0_INT, + AU1200_RTC_MATCH1_INT, + AU1200_RTC_MATCH2_INT, + AU1200_GPIO203_INT, + AU1200_NAND_INT, + AU1200_GPIO204_INT, + AU1200_GPIO205_INT, + AU1200_GPIO206_INT, + AU1200_GPIO207_INT, + AU1200_GPIO208_215_INT, /* Logical OR of 208:215 */ + AU1200_USB_INT, + AU1200_LCD_INT, + AU1200_MAE_BOTH_INT, + AU1200_GPIO0_INT, + AU1200_GPIO1_INT, + AU1200_GPIO2_INT, + AU1200_GPIO3_INT, + AU1200_GPIO4_INT, + AU1200_GPIO5_INT, + AU1200_GPIO6_INT, + AU1200_GPIO7_INT, + AU1200_GPIO8_INT, + AU1200_GPIO9_INT, + AU1200_GPIO10_INT, + AU1200_GPIO11_INT, + AU1200_GPIO12_INT, + AU1200_GPIO13_INT, + AU1200_GPIO14_INT, + AU1200_GPIO15_INT, + AU1200_GPIO16_INT, + AU1200_GPIO17_INT, + AU1200_GPIO18_INT, + AU1200_GPIO19_INT, + AU1200_GPIO20_INT, + AU1200_GPIO21_INT, + AU1200_GPIO22_INT, + AU1200_GPIO23_INT, + AU1200_GPIO24_INT, + AU1200_GPIO25_INT, + AU1200_GPIO26_INT, + AU1200_GPIO27_INT, + AU1200_GPIO28_INT, + AU1200_GPIO29_INT, + AU1200_GPIO30_INT, + AU1200_GPIO31_INT, +}; #endif /* !defined (_LANGUAGE_ASSEMBLY) */ @@ -549,78 +911,16 @@ void au1xxx_setup_irqmap(struct au1xxx_irqmap *map, int count); #define IC1_TESTBIT 0xB1800080 -/* Interrupt Numbers */ + /* Au1000 */ #ifdef CONFIG_SOC_AU1000 -enum soc_au1000_ints { - AU1000_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1000_UART0_INT = AU1000_FIRST_INT, - AU1000_UART1_INT, /* au1000 */ - AU1000_UART2_INT, /* au1000 */ - AU1000_UART3_INT, - AU1000_SSI0_INT, /* au1000 */ - AU1000_SSI1_INT, /* au1000 */ - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1000_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1000_IRDA_TX_INT, /* au1000 */ - AU1000_IRDA_RX_INT, /* au1000 */ - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1000_MAC0_DMA_INT, - AU1000_MAC1_DMA_INT, - AU1000_I2S_UO_INT, /* au1000 */ - AU1000_AC97C_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; #define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART2_ADDR 0xB1300000 #define UART3_ADDR 0xB1400000 #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC +#define FOR_PLATFORM_C_USB_HOST_INT AU1000_USB_HOST_INT #define AU1000_ETH0_BASE 0xB0500000 #define AU1000_ETH1_BASE 0xB0510000 @@ -631,78 +931,13 @@ enum soc_au1000_ints { /* Au1500 */ #ifdef CONFIG_SOC_AU1500 -enum soc_au1500_ints { - AU1500_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1500_UART0_INT = AU1500_FIRST_INT, - AU1000_PCI_INTA, /* au1500 */ - AU1000_PCI_INTB, /* au1500 */ - AU1500_UART3_INT, - AU1000_PCI_INTC, /* au1500 */ - AU1000_PCI_INTD, /* au1500 */ - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1500_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1500_PCI_ERR_INT, - AU1500_RESERVED_INT, - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1500_MAC0_DMA_INT, - AU1500_MAC1_DMA_INT, - AU1000_AC97C_INT = AU1500_FIRST_INT + 31, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1500_GPIO_200, - AU1500_GPIO_201, - AU1500_GPIO_202, - AU1500_GPIO_203, - AU1500_GPIO_20, - AU1500_GPIO_204, - AU1500_GPIO_205, - AU1500_GPIO_23, - AU1500_GPIO_24, - AU1500_GPIO_25, - AU1500_GPIO_26, - AU1500_GPIO_27, - AU1500_GPIO_28, - AU1500_GPIO_206, - AU1500_GPIO_207, - AU1500_GPIO_208_215, -}; - -/* shortcuts */ -#define INTA AU1000_PCI_INTA -#define INTB AU1000_PCI_INTB -#define INTC AU1000_PCI_INTC -#define INTD AU1000_PCI_INTD #define UART0_ADDR 0xB1100000 #define UART3_ADDR 0xB1400000 #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017fffc +#define FOR_PLATFORM_C_USB_HOST_INT AU1500_USB_HOST_INT #define AU1500_ETH0_BASE 0xB1500000 #define AU1500_ETH1_BASE 0xB1510000 @@ -713,74 +948,13 @@ enum soc_au1500_ints { /* Au1100 */ #ifdef CONFIG_SOC_AU1100 -enum soc_au1100_ints { - AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1100_UART0_INT = AU1100_FIRST_INT, - AU1100_UART1_INT, - AU1100_SD_INT, - AU1100_UART3_INT, - AU1000_SSI0_INT, - AU1000_SSI1_INT, - AU1000_DMA_INT_BASE, - - AU1000_TOY_INT = AU1100_FIRST_INT + 14, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1000_IRDA_TX_INT, - AU1000_IRDA_RX_INT, - AU1000_USB_DEV_REQ_INT, - AU1000_USB_DEV_SUS_INT, - AU1000_USB_HOST_INT, - AU1000_ACSYNC_INT, - AU1100_MAC0_DMA_INT, - AU1100_GPIO_208_215, - AU1100_LCD_INT, - AU1000_AC97C_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; #define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 #define UART3_ADDR 0xB1400000 #define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */ #define USB_HOST_CONFIG 0xB017FFFC +#define FOR_PLATFORM_C_USB_HOST_INT AU1100_USB_HOST_INT #define AU1100_ETH0_BASE 0xB0500000 #define AU1100_MAC0_ENABLE 0xB0520000 @@ -788,87 +962,12 @@ enum soc_au1100_ints { #endif /* CONFIG_SOC_AU1100 */ #ifdef CONFIG_SOC_AU1550 -enum soc_au1550_ints { - AU1550_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1550_UART0_INT = AU1550_FIRST_INT, - AU1550_PCI_INTA, - AU1550_PCI_INTB, - AU1550_DDMA_INT, - AU1550_CRYPTO_INT, - AU1550_PCI_INTC, - AU1550_PCI_INTD, - AU1550_PCI_RST_INT, - AU1550_UART1_INT, - AU1550_UART3_INT, - AU1550_PSC0_INT, - AU1550_PSC1_INT, - AU1550_PSC2_INT, - AU1550_PSC3_INT, - AU1000_TOY_INT, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - - AU1550_NAND_INT = AU1550_FIRST_INT + 23, - AU1550_USB_DEV_REQ_INT, - AU1000_USB_DEV_REQ_INT = AU1550_USB_DEV_REQ_INT, - AU1550_USB_DEV_SUS_INT, - AU1000_USB_DEV_SUS_INT = AU1550_USB_DEV_SUS_INT, - AU1550_USB_HOST_INT, - AU1000_USB_HOST_INT = AU1550_USB_HOST_INT, - AU1550_MAC0_DMA_INT, - AU1550_MAC1_DMA_INT, - AU1000_GPIO_0 = AU1550_FIRST_INT + 32, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1550_GPIO_200, - AU1500_GPIO_201_205, /* Logical or of GPIO201:205 */ - AU1500_GPIO_16, - AU1500_GPIO_17, - AU1500_GPIO_20, - AU1500_GPIO_21, - AU1500_GPIO_22, - AU1500_GPIO_23, - AU1500_GPIO_24, - AU1500_GPIO_25, - AU1500_GPIO_26, - AU1500_GPIO_27, - AU1500_GPIO_28, - AU1500_GPIO_206, - AU1500_GPIO_207, - AU1500_GPIO_208_218, /* Logical or of GPIO208:218 */ -}; - -/* shortcuts */ -#define INTA AU1550_PCI_INTA -#define INTB AU1550_PCI_INTB -#define INTC AU1550_PCI_INTC -#define INTD AU1550_PCI_INTD - #define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 -#define UART3_ADDR 0xB1400000 #define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */ #define USB_OHCI_LEN 0x00060000 #define USB_HOST_CONFIG 0xB4027ffc +#define FOR_PLATFORM_C_USB_HOST_INT AU1550_USB_HOST_INT #define AU1550_ETH0_BASE 0xB0500000 #define AU1550_ETH1_BASE 0xB0510000 @@ -877,78 +976,10 @@ enum soc_au1550_ints { #define NUM_ETH_INTERFACES 2 #endif /* CONFIG_SOC_AU1550 */ + #ifdef CONFIG_SOC_AU1200 -enum soc_au1200_ints { - AU1200_FIRST_INT = MIPS_CPU_IRQ_BASE + 8, - AU1200_UART0_INT = AU1200_FIRST_INT, - AU1200_SWT_INT, - AU1200_SD_INT, - AU1200_DDMA_INT, - AU1200_MAE_BE_INT, - AU1200_GPIO_200, - AU1200_GPIO_201, - AU1200_GPIO_202, - AU1200_UART1_INT, - AU1200_MAE_FE_INT, - AU1200_PSC0_INT, - AU1200_PSC1_INT, - AU1200_AES_INT, - AU1200_CAMERA_INT, - AU1000_TOY_INT, - AU1000_TOY_MATCH0_INT, - AU1000_TOY_MATCH1_INT, - AU1000_TOY_MATCH2_INT, - AU1000_RTC_INT, - AU1000_RTC_MATCH0_INT, - AU1000_RTC_MATCH1_INT, - AU1000_RTC_MATCH2_INT, - AU1200_GPIO_203, - AU1200_NAND_INT, - AU1200_GPIO_204, - AU1200_GPIO_205, - AU1200_GPIO_206, - AU1200_GPIO_207, - AU1200_GPIO_208_215, /* Logical OR of 208:215 */ - AU1200_USB_INT, - AU1000_USB_HOST_INT = AU1200_USB_INT, - AU1200_LCD_INT, - AU1200_MAE_BOTH_INT, - AU1000_GPIO_0, - AU1000_GPIO_1, - AU1000_GPIO_2, - AU1000_GPIO_3, - AU1000_GPIO_4, - AU1000_GPIO_5, - AU1000_GPIO_6, - AU1000_GPIO_7, - AU1000_GPIO_8, - AU1000_GPIO_9, - AU1000_GPIO_10, - AU1000_GPIO_11, - AU1000_GPIO_12, - AU1000_GPIO_13, - AU1000_GPIO_14, - AU1000_GPIO_15, - AU1000_GPIO_16, - AU1000_GPIO_17, - AU1000_GPIO_18, - AU1000_GPIO_19, - AU1000_GPIO_20, - AU1000_GPIO_21, - AU1000_GPIO_22, - AU1000_GPIO_23, - AU1000_GPIO_24, - AU1000_GPIO_25, - AU1000_GPIO_26, - AU1000_GPIO_27, - AU1000_GPIO_28, - AU1000_GPIO_29, - AU1000_GPIO_30, - AU1000_GPIO_31, -}; #define UART0_ADDR 0xB1100000 -#define UART1_ADDR 0xB1200000 #define USB_UOC_BASE 0x14020020 #define USB_UOC_LEN 0x20 @@ -974,15 +1005,9 @@ enum soc_au1200_ints { #define USBMSRMCFG_RDCOMB 30 #define USBMSRMCFG_PFEN 31 -#endif /* CONFIG_SOC_AU1200 */ - -#define AU1000_INTC0_INT_BASE (MIPS_CPU_IRQ_BASE + 8) -#define AU1000_INTC0_INT_LAST (AU1000_INTC0_INT_BASE + 31) -#define AU1000_INTC1_INT_BASE (AU1000_INTC0_INT_BASE + 32) -#define AU1000_INTC1_INT_LAST (AU1000_INTC1_INT_BASE + 31) +#define FOR_PLATFORM_C_USB_HOST_INT AU1200_USB_INT -#define AU1000_MAX_INTR AU1000_INTC1_INT_LAST -#define INTX 0xFF /* not valid */ +#endif /* CONFIG_SOC_AU1200 */ /* Programmable Counters 0 and 1 */ #define SYS_BASE 0xB1900000 @@ -1231,14 +1256,6 @@ enum soc_au1200_ints { #define MAC_RX_BUFF3_STATUS 0x30 #define MAC_RX_BUFF3_ADDR 0x34 -/* UARTS 0-3 */ -#define UART_BASE UART0_ADDR -#ifdef CONFIG_SOC_AU1200 -#define UART_DEBUG_BASE UART1_ADDR -#else -#define UART_DEBUG_BASE UART3_ADDR -#endif - #define UART_RX 0 /* Receive buffer */ #define UART_TX 4 /* Transmit buffer */ #define UART_IER 8 /* Interrupt Enable Register */ @@ -1251,84 +1268,6 @@ enum soc_au1200_ints { #define UART_CLK 0x28 /* Baud Rate Clock Divider */ #define UART_MOD_CNTRL 0x100 /* Module Control */ -#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ -#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ -#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ -#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ -#define UART_FCR_TRIGGER_MASK 0xF0 /* Mask for the FIFO trigger range */ -#define UART_FCR_R_TRIGGER_1 0x00 /* Mask for receive trigger set at 1 */ -#define UART_FCR_R_TRIGGER_4 0x40 /* Mask for receive trigger set at 4 */ -#define UART_FCR_R_TRIGGER_8 0x80 /* Mask for receive trigger set at 8 */ -#define UART_FCR_R_TRIGGER_14 0xA0 /* Mask for receive trigger set at 14 */ -#define UART_FCR_T_TRIGGER_0 0x00 /* Mask for transmit trigger set at 0 */ -#define UART_FCR_T_TRIGGER_4 0x10 /* Mask for transmit trigger set at 4 */ -#define UART_FCR_T_TRIGGER_8 0x20 /* Mask for transmit trigger set at 8 */ -#define UART_FCR_T_TRIGGER_12 0x30 /* Mask for transmit trigger set at 12 */ - -/* - * These are the definitions for the Line Control Register - */ -#define UART_LCR_SBC 0x40 /* Set break control */ -#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ -#define UART_LCR_EPAR 0x10 /* Even parity select */ -#define UART_LCR_PARITY 0x08 /* Parity Enable */ -#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 stop bit, 1= 2 stop bits */ -#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ -#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ -#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ -#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ - -/* - * These are the definitions for the Line Status Register - */ -#define UART_LSR_TEMT 0x40 /* Transmitter empty */ -#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ -#define UART_LSR_BI 0x10 /* Break interrupt indicator */ -#define UART_LSR_FE 0x08 /* Frame error indicator */ -#define UART_LSR_PE 0x04 /* Parity error indicator */ -#define UART_LSR_OE 0x02 /* Overrun error indicator */ -#define UART_LSR_DR 0x01 /* Receiver data ready */ - -/* - * These are the definitions for the Interrupt Identification Register - */ -#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ -#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ -#define UART_IIR_MSI 0x00 /* Modem status interrupt */ -#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ -#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ -#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ - -/* - * These are the definitions for the Interrupt Enable Register - */ -#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ -#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ -#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ -#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ - -/* - * These are the definitions for the Modem Control Register - */ -#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ -#define UART_MCR_OUT2 0x08 /* Out2 complement */ -#define UART_MCR_OUT1 0x04 /* Out1 complement */ -#define UART_MCR_RTS 0x02 /* RTS complement */ -#define UART_MCR_DTR 0x01 /* DTR complement */ - -/* - * These are the definitions for the Modem Status Register - */ -#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ -#define UART_MSR_RI 0x40 /* Ring Indicator */ -#define UART_MSR_DSR 0x20 /* Data Set Ready */ -#define UART_MSR_CTS 0x10 /* Clear to Send */ -#define UART_MSR_DDCD 0x08 /* Delta DCD */ -#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ -#define UART_MSR_DDSR 0x02 /* Delta DSR */ -#define UART_MSR_DCTS 0x01 /* Delta CTS */ -#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ - /* SSIO */ #define SSI0_STATUS 0xB1600000 # define SSI_STATUS_BF (1 << 4) @@ -1720,7 +1659,7 @@ enum soc_au1200_ints { #define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */ #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_END 0xfffffffffULL #else /* Au1000 and Au1100 and Au1200 */ @@ -1728,7 +1667,7 @@ enum soc_au1200_ints { #define IOPORT_RESOURCE_START 0x10000000 #define IOPORT_RESOURCE_END 0xffffffff #define IOMEM_RESOURCE_START 0x10000000 -#define IOMEM_RESOURCE_END 0xffffffff +#define IOMEM_RESOURCE_END 0xfffffffffULL #define PCI_IO_START 0 #define PCI_IO_END 0 @@ -1739,53 +1678,4 @@ enum soc_au1200_ints { #endif -#ifndef _LANGUAGE_ASSEMBLY -typedef volatile struct { - /* 0x0000 */ u32 toytrim; - /* 0x0004 */ u32 toywrite; - /* 0x0008 */ u32 toymatch0; - /* 0x000C */ u32 toymatch1; - /* 0x0010 */ u32 toymatch2; - /* 0x0014 */ u32 cntrctrl; - /* 0x0018 */ u32 scratch0; - /* 0x001C */ u32 scratch1; - /* 0x0020 */ u32 freqctrl0; - /* 0x0024 */ u32 freqctrl1; - /* 0x0028 */ u32 clksrc; - /* 0x002C */ u32 pinfunc; - /* 0x0030 */ u32 reserved0; - /* 0x0034 */ u32 wakemsk; - /* 0x0038 */ u32 endian; - /* 0x003C */ u32 powerctrl; - /* 0x0040 */ u32 toyread; - /* 0x0044 */ u32 rtctrim; - /* 0x0048 */ u32 rtcwrite; - /* 0x004C */ u32 rtcmatch0; - /* 0x0050 */ u32 rtcmatch1; - /* 0x0054 */ u32 rtcmatch2; - /* 0x0058 */ u32 rtcread; - /* 0x005C */ u32 wakesrc; - /* 0x0060 */ u32 cpupll; - /* 0x0064 */ u32 auxpll; - /* 0x0068 */ u32 reserved1; - /* 0x006C */ u32 reserved2; - /* 0x0070 */ u32 reserved3; - /* 0x0074 */ u32 reserved4; - /* 0x0078 */ u32 slppwr; - /* 0x007C */ u32 sleep; - /* 0x0080 */ u32 reserved5[32]; - /* 0x0100 */ u32 trioutrd; -#define trioutclr trioutrd - /* 0x0104 */ u32 reserved6; - /* 0x0108 */ u32 outputrd; -#define outputset outputrd - /* 0x010C */ u32 outputclr; - /* 0x0110 */ u32 pinstaterd; -#define pininputen pinstaterd -} AU1X00_SYS; - -static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE; - -#endif - #endif diff --git a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h index c35e2091849..94000a3b6f0 100644 --- a/arch/mips/include/asm/mach-au1x00/au1100_mmc.h +++ b/arch/mips/include/asm/mach-au1x00/au1100_mmc.h @@ -46,6 +46,7 @@ struct au1xmmc_platform_data { int(*card_readonly)(void *mmc_host); void(*set_power)(void *mmc_host, int state); struct led_classdev *led; + unsigned long mask_host_caps; }; #define SD0_BASE 0xB0600000 @@ -205,4 +206,3 @@ struct au1xmmc_platform_data { #endif /* __ASM_AU1100_MMC_H */ - diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h index d206000fbfe..8c6b1105ce0 100644 --- a/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_dbdma.h @@ -339,8 +339,8 @@ u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits); u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries); /* Put buffers on source/destination descriptors. */ -u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags); -u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_source(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); +u32 au1xxx_dbdma_put_dest(u32 chanid, dma_addr_t buf, int nbytes, u32 flags); /* Get a buffer from the destination descriptor. */ u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes); @@ -363,25 +363,6 @@ void au1xxx_dbdma_suspend(void); void au1xxx_dbdma_resume(void); #endif - -/* - * Some compatibilty macros -- needed to make changes to API - * without breaking existing drivers. - */ -#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags) -#define put_source_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) - -#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE) -#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \ - _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags) -#define put_dest_flags(chanid, buf, nbytes, flags) \ - au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) - /* * Flags for the put_source/put_dest functions. */ diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h new file mode 100644 index 00000000000..bae9b758fcd --- /dev/null +++ b/arch/mips/include/asm/mach-au1x00/au1xxx_eth.h @@ -0,0 +1,17 @@ +#ifndef __AU1X00_ETH_DATA_H +#define __AU1X00_ETH_DATA_H + +/* Platform specific PHY configuration passed to the MAC driver */ +struct au1000_eth_platform_data { + int phy_static_config; + int phy_search_highest_addr; + int phy1_search_mac0; + int phy_addr; + int phy_busid; + int phy_irq; +}; + +void __init au1xxx_override_eth_cfg(unsigned port, + struct au1000_eth_platform_data *eth_data); + +#endif /* __AU1X00_ETH_DATA_H */ diff --git a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h index 91595fa8903..62d2f136d94 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio-au1000.h +++ b/arch/mips/include/asm/mach-au1x00/gpio-au1000.h @@ -35,15 +35,13 @@ static inline int au1000_gpio2_to_irq(int gpio) return -ENXIO; } -#ifdef CONFIG_SOC_AU1000 static inline int au1000_irq_to_gpio(int irq) { - if ((irq >= AU1000_GPIO_0) && (irq <= AU1000_GPIO_31)) - return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; + if ((irq >= AU1000_GPIO0_INT) && (irq <= AU1000_GPIO31_INT)) + return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO0_INT) + 0; return -ENXIO; } -#endif static inline int au1500_gpio1_to_irq(int gpio) { @@ -71,27 +69,25 @@ static inline int au1500_gpio2_to_irq(int gpio) return -ENXIO; } -#ifdef CONFIG_SOC_AU1500 static inline int au1500_irq_to_gpio(int irq) { switch (irq) { - case AU1000_GPIO_0 ... AU1000_GPIO_15: - case AU1500_GPIO_20: - case AU1500_GPIO_23 ... AU1500_GPIO_28: - return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; - case AU1500_GPIO_200 ... AU1500_GPIO_203: - return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_200) + 0; - case AU1500_GPIO_204 ... AU1500_GPIO_205: - return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_204) + 4; - case AU1500_GPIO_206 ... AU1500_GPIO_207: - return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6; - case AU1500_GPIO_208_215: + case AU1500_GPIO0_INT ... AU1500_GPIO15_INT: + case AU1500_GPIO20_INT: + case AU1500_GPIO23_INT ... AU1500_GPIO28_INT: + return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO0_INT) + 0; + case AU1500_GPIO200_INT ... AU1500_GPIO203_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO200_INT) + 0; + case AU1500_GPIO204_INT ... AU1500_GPIO205_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO204_INT) + 4; + case AU1500_GPIO206_INT ... AU1500_GPIO207_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO206_INT) + 6; + case AU1500_GPIO208_215_INT: return ALCHEMY_GPIO2_BASE + 8; } return -ENXIO; } -#endif static inline int au1100_gpio1_to_irq(int gpio) { @@ -108,19 +104,17 @@ static inline int au1100_gpio2_to_irq(int gpio) return -ENXIO; } -#ifdef CONFIG_SOC_AU1100 static inline int au1100_irq_to_gpio(int irq) { switch (irq) { - case AU1000_GPIO_0 ... AU1000_GPIO_31: - return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; - case AU1100_GPIO_208_215: + case AU1100_GPIO0_INT ... AU1100_GPIO31_INT: + return ALCHEMY_GPIO1_BASE + (irq - AU1100_GPIO0_INT) + 0; + case AU1100_GPIO208_215_INT: return ALCHEMY_GPIO2_BASE + 8; } return -ENXIO; } -#endif static inline int au1550_gpio1_to_irq(int gpio) { @@ -149,24 +143,22 @@ static inline int au1550_gpio2_to_irq(int gpio) return -ENXIO; } -#ifdef CONFIG_SOC_AU1550 static inline int au1550_irq_to_gpio(int irq) { switch (irq) { - case AU1000_GPIO_0 ... AU1000_GPIO_15: - return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; - case AU1550_GPIO_200: - case AU1500_GPIO_201_205: - return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO_200) + 0; - case AU1500_GPIO_16 ... AU1500_GPIO_28: - return ALCHEMY_GPIO1_BASE + (irq - AU1500_GPIO_16) + 16; - case AU1500_GPIO_206 ... AU1500_GPIO_208_218: - return ALCHEMY_GPIO2_BASE + (irq - AU1500_GPIO_206) + 6; + case AU1550_GPIO0_INT ... AU1550_GPIO15_INT: + return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO0_INT) + 0; + case AU1550_GPIO200_INT: + case AU1550_GPIO201_205_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO200_INT) + 0; + case AU1550_GPIO16_INT ... AU1550_GPIO28_INT: + return ALCHEMY_GPIO1_BASE + (irq - AU1550_GPIO16_INT) + 16; + case AU1550_GPIO206_INT ... AU1550_GPIO208_215_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1550_GPIO206_INT) + 6; } return -ENXIO; } -#endif static inline int au1200_gpio1_to_irq(int gpio) { @@ -187,23 +179,21 @@ static inline int au1200_gpio2_to_irq(int gpio) return -ENXIO; } -#ifdef CONFIG_SOC_AU1200 static inline int au1200_irq_to_gpio(int irq) { switch (irq) { - case AU1000_GPIO_0 ... AU1000_GPIO_31: - return ALCHEMY_GPIO1_BASE + (irq - AU1000_GPIO_0) + 0; - case AU1200_GPIO_200 ... AU1200_GPIO_202: - return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_200) + 0; - case AU1200_GPIO_203: + case AU1200_GPIO0_INT ... AU1200_GPIO31_INT: + return ALCHEMY_GPIO1_BASE + (irq - AU1200_GPIO0_INT) + 0; + case AU1200_GPIO200_INT ... AU1200_GPIO202_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO200_INT) + 0; + case AU1200_GPIO203_INT: return ALCHEMY_GPIO2_BASE + 3; - case AU1200_GPIO_204 ... AU1200_GPIO_208_215: - return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO_204) + 4; + case AU1200_GPIO204_INT ... AU1200_GPIO208_215_INT: + return ALCHEMY_GPIO2_BASE + (irq - AU1200_GPIO204_INT) + 4; } return -ENXIO; } -#endif /* * GPIO1 block macros for common linux gpio functions. @@ -246,19 +236,19 @@ static inline int alchemy_gpio1_is_valid(int gpio) static inline int alchemy_gpio1_to_irq(int gpio) { -#if defined(CONFIG_SOC_AU1000) - return au1000_gpio1_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1100) - return au1100_gpio1_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1500) - return au1500_gpio1_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1550) - return au1550_gpio1_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1200) - return au1200_gpio1_to_irq(gpio); -#else + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + return au1000_gpio1_to_irq(gpio); + case ALCHEMY_CPU_AU1100: + return au1100_gpio1_to_irq(gpio); + case ALCHEMY_CPU_AU1500: + return au1500_gpio1_to_irq(gpio); + case ALCHEMY_CPU_AU1550: + return au1550_gpio1_to_irq(gpio); + case ALCHEMY_CPU_AU1200: + return au1200_gpio1_to_irq(gpio); + } return -ENXIO; -#endif } /* @@ -316,19 +306,19 @@ static inline int alchemy_gpio2_is_valid(int gpio) static inline int alchemy_gpio2_to_irq(int gpio) { -#if defined(CONFIG_SOC_AU1000) - return au1000_gpio2_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1100) - return au1100_gpio2_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1500) - return au1500_gpio2_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1550) - return au1550_gpio2_to_irq(gpio); -#elif defined(CONFIG_SOC_AU1200) - return au1200_gpio2_to_irq(gpio); -#else + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + return au1000_gpio2_to_irq(gpio); + case ALCHEMY_CPU_AU1100: + return au1100_gpio2_to_irq(gpio); + case ALCHEMY_CPU_AU1500: + return au1500_gpio2_to_irq(gpio); + case ALCHEMY_CPU_AU1550: + return au1550_gpio2_to_irq(gpio); + case ALCHEMY_CPU_AU1200: + return au1200_gpio2_to_irq(gpio); + } return -ENXIO; -#endif } /**********************************************************************/ @@ -384,10 +374,13 @@ static inline void alchemy_gpio2_enable_int(int gpio2) gpio2 -= ALCHEMY_GPIO2_BASE; -#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ - gpio2 -= 8; -#endif + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1500: + gpio2 -= 8; + } + local_irq_save(flags); __alchemy_gpio2_mod_int(gpio2, 1); local_irq_restore(flags); @@ -405,10 +398,13 @@ static inline void alchemy_gpio2_disable_int(int gpio2) gpio2 -= ALCHEMY_GPIO2_BASE; -#if defined(CONFIG_SOC_AU1100) || defined(CONFIG_SOC_AU1500) /* Au1100/Au1500 have GPIO208-215 enable bits at 0..7 */ - gpio2 -= 8; -#endif + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1100: + case ALCHEMY_CPU_AU1500: + gpio2 -= 8; + } + local_irq_save(flags); __alchemy_gpio2_mod_int(gpio2, 0); local_irq_restore(flags); @@ -494,19 +490,19 @@ static inline int alchemy_gpio_to_irq(int gpio) static inline int alchemy_irq_to_gpio(int irq) { -#if defined(CONFIG_SOC_AU1000) - return au1000_irq_to_gpio(irq); -#elif defined(CONFIG_SOC_AU1100) - return au1100_irq_to_gpio(irq); -#elif defined(CONFIG_SOC_AU1500) - return au1500_irq_to_gpio(irq); -#elif defined(CONFIG_SOC_AU1550) - return au1550_irq_to_gpio(irq); -#elif defined(CONFIG_SOC_AU1200) - return au1200_irq_to_gpio(irq); -#else + switch (alchemy_get_cputype()) { + case ALCHEMY_CPU_AU1000: + return au1000_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1100: + return au1100_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1500: + return au1500_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1550: + return au1550_irq_to_gpio(irq); + case ALCHEMY_CPU_AU1200: + return au1200_irq_to_gpio(irq); + } return -ENXIO; -#endif } /**********************************************************************/ diff --git a/arch/mips/include/asm/mach-au1x00/gpio.h b/arch/mips/include/asm/mach-au1x00/gpio.h index f9b7d41c659..c3f60cdc320 100644 --- a/arch/mips/include/asm/mach-au1x00/gpio.h +++ b/arch/mips/include/asm/mach-au1x00/gpio.h @@ -1,7 +1,7 @@ #ifndef _ALCHEMY_GPIO_H_ #define _ALCHEMY_GPIO_H_ -#if defined(CONFIG_ALCHEMY_GPIO_AU1000) +#if defined(CONFIG_ALCHEMY_GPIOINT_AU1000) #include <asm/mach-au1x00/gpio-au1000.h> diff --git a/arch/mips/include/asm/mach-au1x00/ioremap.h b/arch/mips/include/asm/mach-au1x00/ioremap.h index 364cea2dc71..75a94ad3ac9 100644 --- a/arch/mips/include/asm/mach-au1x00/ioremap.h +++ b/arch/mips/include/asm/mach-au1x00/ioremap.h @@ -11,7 +11,7 @@ #include <linux/types.h> -#ifdef CONFIG_64BIT_PHYS_ADDR +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_PCI) extern phys_t __fixup_bigphys_addr(phys_t, phys_t); #else static inline phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size) diff --git a/arch/mips/include/asm/mach-au1x00/prom.h b/arch/mips/include/asm/mach-au1x00/prom.h index e38715577c5..4c0e09cf173 100644 --- a/arch/mips/include/asm/mach-au1x00/prom.h +++ b/arch/mips/include/asm/mach-au1x00/prom.h @@ -6,7 +6,6 @@ extern char **prom_argv; extern char **prom_envp; extern void prom_init_cmdline(void); -extern char *prom_getcmdline(void); extern char *prom_getenv(char *envname); extern int prom_get_ethernet_addr(char *ethernet_addr); diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index ed4ccec87dd..85fd27509aa 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -770,4 +770,3 @@ #define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) #endif /* BCM63XX_REGS_H_ */ - diff --git a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h index 425e708d4fb..bbf05404239 100644 --- a/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-cavium-octeon/cpu-feature-overrides.h @@ -58,6 +58,9 @@ #define cpu_has_vint 0 #define cpu_has_veic 0 #define cpu_hwrena_impl_bits 0xc0000000 + +#define kernel_uses_smartmips_rixi (cpu_data[0].cputype == CPU_CAVIUM_OCTEON_PLUS) + #define ARCH_HAS_READ_CURRENT_TIMER 1 #define ARCH_HAS_IRQ_PER_CPU 1 #define ARCH_HAS_SPINLOCK_PREFETCH 1 diff --git a/arch/mips/include/asm/mach-db1x00/bcsr.h b/arch/mips/include/asm/mach-db1x00/bcsr.h new file mode 100644 index 00000000000..618d2de02ed --- /dev/null +++ b/arch/mips/include/asm/mach-db1x00/bcsr.h @@ -0,0 +1,238 @@ +/* + * bcsr.h -- Db1xxx/Pb1xxx Devboard CPLD registers ("BCSR") abstraction. + * + * All Alchemy development boards (except, of course, the weird PB1000) + * have a few registers in a CPLD with standardised layout; they mostly + * only differ in base address and bit meanings in the RESETS and BOARD + * registers. + * + * All data taken from the official AMD board documentation sheets. + */ + +#ifndef _DB1XXX_BCSR_H_ +#define _DB1XXX_BCSR_H_ + + +/* BCSR base addresses on various boards. BCSR base 2 refers to the + * physical address of the first HEXLEDS register, which is usually + * a variable offset from the WHOAMI register. + */ + +/* DB1000, DB1100, DB1500, PB1100, PB1500 */ +#define DB1000_BCSR_PHYS_ADDR 0x0E000000 +#define DB1000_BCSR_HEXLED_OFS 0x01000000 + +#define DB1550_BCSR_PHYS_ADDR 0x0F000000 +#define DB1550_BCSR_HEXLED_OFS 0x00400000 + +#define PB1550_BCSR_PHYS_ADDR 0x0F000000 +#define PB1550_BCSR_HEXLED_OFS 0x00800000 + +#define DB1200_BCSR_PHYS_ADDR 0x19800000 +#define DB1200_BCSR_HEXLED_OFS 0x00400000 + +#define PB1200_BCSR_PHYS_ADDR 0x0D800000 +#define PB1200_BCSR_HEXLED_OFS 0x00400000 + + +enum bcsr_id { + /* BCSR base 1 */ + BCSR_WHOAMI = 0, + BCSR_STATUS, + BCSR_SWITCHES, + BCSR_RESETS, + BCSR_PCMCIA, + BCSR_BOARD, + BCSR_LEDS, + BCSR_SYSTEM, + /* Au1200/1300 based boards */ + BCSR_INTCLR, + BCSR_INTSET, + BCSR_MASKCLR, + BCSR_MASKSET, + BCSR_SIGSTAT, + BCSR_INTSTAT, + + /* BCSR base 2 */ + BCSR_HEXLEDS, + BCSR_RSVD1, + BCSR_HEXCLEAR, + + BCSR_CNT, +}; + +/* register offsets, valid for all Db1xxx/Pb1xxx boards */ +#define BCSR_REG_WHOAMI 0x00 +#define BCSR_REG_STATUS 0x04 +#define BCSR_REG_SWITCHES 0x08 +#define BCSR_REG_RESETS 0x0c +#define BCSR_REG_PCMCIA 0x10 +#define BCSR_REG_BOARD 0x14 +#define BCSR_REG_LEDS 0x18 +#define BCSR_REG_SYSTEM 0x1c +/* Au1200/Au1300 based boards: CPLD IRQ muxer */ +#define BCSR_REG_INTCLR 0x20 +#define BCSR_REG_INTSET 0x24 +#define BCSR_REG_MASKCLR 0x28 +#define BCSR_REG_MASKSET 0x2c +#define BCSR_REG_SIGSTAT 0x30 +#define BCSR_REG_INTSTAT 0x34 + +/* hexled control, offset from BCSR base 2 */ +#define BCSR_REG_HEXLEDS 0x00 +#define BCSR_REG_HEXCLEAR 0x08 + +/* + * Register Bits and Pieces. + */ +#define BCSR_WHOAMI_DCID(x) ((x) & 0xf) +#define BCSR_WHOAMI_CPLD(x) (((x) >> 4) & 0xf) +#define BCSR_WHOAMI_BOARD(x) (((x) >> 8) & 0xf) + +/* register "WHOAMI" bits 11:8 identify the board */ +enum bcsr_whoami_boards { + BCSR_WHOAMI_PB1500 = 1, + BCSR_WHOAMI_PB1500R2, + BCSR_WHOAMI_PB1100, + BCSR_WHOAMI_DB1000, + BCSR_WHOAMI_DB1100, + BCSR_WHOAMI_DB1500, + BCSR_WHOAMI_DB1550, + BCSR_WHOAMI_PB1550_DDR, + BCSR_WHOAMI_PB1550 = BCSR_WHOAMI_PB1550_DDR, + BCSR_WHOAMI_PB1550_SDR, + BCSR_WHOAMI_PB1200_DDR1, + BCSR_WHOAMI_PB1200 = BCSR_WHOAMI_PB1200_DDR1, + BCSR_WHOAMI_PB1200_DDR2, + BCSR_WHOAMI_DB1200, +}; + +/* STATUS reg. Unless otherwise noted, they're valid on all boards. + * PB1200 = DB1200. + */ +#define BCSR_STATUS_PC0VS 0x0003 +#define BCSR_STATUS_PC1VS 0x000C +#define BCSR_STATUS_PC0FI 0x0010 +#define BCSR_STATUS_PC1FI 0x0020 +#define BCSR_STATUS_PB1550_SWAPBOOT 0x0040 +#define BCSR_STATUS_SRAMWIDTH 0x0080 +#define BCSR_STATUS_FLASHBUSY 0x0100 +#define BCSR_STATUS_ROMBUSY 0x0400 +#define BCSR_STATUS_SD0WP 0x0400 /* DB1200 */ +#define BCSR_STATUS_SD1WP 0x0800 +#define BCSR_STATUS_USBOTGID 0x0800 /* PB/DB1550 */ +#define BCSR_STATUS_DB1000_SWAPBOOT 0x2000 +#define BCSR_STATUS_DB1200_SWAPBOOT 0x0040 /* DB1200 */ +#define BCSR_STATUS_IDECBLID 0x0200 /* DB1200 */ +#define BCSR_STATUS_DB1200_U0RXD 0x1000 /* DB1200 */ +#define BCSR_STATUS_DB1200_U1RXD 0x2000 /* DB1200 */ +#define BCSR_STATUS_FLASHDEN 0xC000 +#define BCSR_STATUS_DB1550_U0RXD 0x1000 /* DB1550 */ +#define BCSR_STATUS_DB1550_U3RXD 0x2000 /* DB1550 */ +#define BCSR_STATUS_PB1550_U0RXD 0x1000 /* PB1550 */ +#define BCSR_STATUS_PB1550_U1RXD 0x2000 /* PB1550 */ +#define BCSR_STATUS_PB1550_U3RXD 0x8000 /* PB1550 */ + + +/* DB/PB1000,1100,1500,1550 */ +#define BCSR_RESETS_PHY0 0x0001 +#define BCSR_RESETS_PHY1 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_FIR_SEL 0x2000 +#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 +#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 +#define BCSR_RESETS_PB1550_WSCFSM 0x2000 +#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 +#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 +#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 +#define BCSR_RESETS_DMAREQ 0x8000 /* PB1550 */ + +#define BCSR_BOARD_PCIM66EN 0x0001 +#define BCSR_BOARD_SD0PWR 0x0040 +#define BCSR_BOARD_SD1PWR 0x0080 +#define BCSR_BOARD_PCIM33 0x0100 +#define BCSR_BOARD_PCIEXTARB 0x0200 +#define BCSR_BOARD_GPIO200RST 0x0400 +#define BCSR_BOARD_PCICLKOUT 0x0800 +#define BCSR_BOARD_PCICFG 0x1000 +#define BCSR_BOARD_SPISEL 0x4000 /* PB/DB1550 */ +#define BCSR_BOARD_SD0WP 0x4000 /* DB1100 */ +#define BCSR_BOARD_SD1WP 0x8000 /* DB1100 */ + + +/* DB/PB1200 */ +#define BCSR_RESETS_ETH 0x0001 +#define BCSR_RESETS_CAMERA 0x0002 +#define BCSR_RESETS_DC 0x0004 +#define BCSR_RESETS_IDE 0x0008 +#define BCSR_RESETS_TV 0x0010 /* DB1200 */ +/* Not resets but in the same register */ +#define BCSR_RESETS_PWMR1MUX 0x0800 /* DB1200 */ +#define BCSR_RESETS_PB1200_WSCFSM 0x0800 /* PB1200 */ +#define BCSR_RESETS_PSC0MUX 0x1000 +#define BCSR_RESETS_PSC1MUX 0x2000 +#define BCSR_RESETS_SPISEL 0x4000 +#define BCSR_RESETS_SD1MUX 0x8000 /* PB1200 */ + +#define BCSR_BOARD_LCDVEE 0x0001 +#define BCSR_BOARD_LCDVDD 0x0002 +#define BCSR_BOARD_LCDBL 0x0004 +#define BCSR_BOARD_CAMSNAP 0x0010 +#define BCSR_BOARD_CAMPWR 0x0020 +#define BCSR_BOARD_SD0PWR 0x0040 + + +#define BCSR_SWITCHES_DIP 0x00FF +#define BCSR_SWITCHES_DIP_1 0x0080 +#define BCSR_SWITCHES_DIP_2 0x0040 +#define BCSR_SWITCHES_DIP_3 0x0020 +#define BCSR_SWITCHES_DIP_4 0x0010 +#define BCSR_SWITCHES_DIP_5 0x0008 +#define BCSR_SWITCHES_DIP_6 0x0004 +#define BCSR_SWITCHES_DIP_7 0x0002 +#define BCSR_SWITCHES_DIP_8 0x0001 +#define BCSR_SWITCHES_ROTARY 0x0F00 + + +#define BCSR_PCMCIA_PC0VPP 0x0003 +#define BCSR_PCMCIA_PC0VCC 0x000C +#define BCSR_PCMCIA_PC0DRVEN 0x0010 +#define BCSR_PCMCIA_PC0RST 0x0080 +#define BCSR_PCMCIA_PC1VPP 0x0300 +#define BCSR_PCMCIA_PC1VCC 0x0C00 +#define BCSR_PCMCIA_PC1DRVEN 0x1000 +#define BCSR_PCMCIA_PC1RST 0x8000 + + +#define BCSR_LEDS_DECIMALS 0x0003 +#define BCSR_LEDS_LED0 0x0100 +#define BCSR_LEDS_LED1 0x0200 +#define BCSR_LEDS_LED2 0x0400 +#define BCSR_LEDS_LED3 0x0800 + + +#define BCSR_SYSTEM_RESET 0x8000 /* clear to reset */ +#define BCSR_SYSTEM_PWROFF 0x4000 /* set to power off */ +#define BCSR_SYSTEM_VDDI 0x001F /* PB1xxx boards */ + + + + +/* initialize BCSR for a board. Provide the PHYSICAL addresses of both + * BCSR spaces. + */ +void __init bcsr_init(unsigned long bcsr1_phys, unsigned long bcsr2_phys); + +/* read a board register */ +unsigned short bcsr_read(enum bcsr_id reg); + +/* write to a board register */ +void bcsr_write(enum bcsr_id reg, unsigned short val); + +/* modify a register. clear bits set in 'clr', set bits set in 'set' */ +void bcsr_mod(enum bcsr_id reg, unsigned short clr, unsigned short set); + +/* install CPLD IRQ demuxer (DB1200/PB1200) */ +void __init bcsr_init_irq(int csc_start, int csc_end, int hook_irq); + +#endif diff --git a/arch/mips/include/asm/mach-db1x00/db1200.h b/arch/mips/include/asm/mach-db1x00/db1200.h index 27f26102b1b..3404248f509 100644 --- a/arch/mips/include/asm/mach-db1x00/db1200.h +++ b/arch/mips/include/asm/mach-db1x00/db1200.h @@ -25,133 +25,9 @@ #define __ASM_DB1200_H #include <linux/types.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_psc.h> -#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX -#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX -#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX - -/* - * SPI and SMB are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define SPI_PSC_BASE PSC0_BASE_ADDR -#define SMBUS_PSC_BASE PSC0_BASE_ADDR -/* - * AC'97 and I2S are muxed on the DBAu1200 board. - * Refer to board documentation. - */ -#define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR - -#define BCSR_KSEG1_ADDR 0xB9800000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 board; - u16 reserved5; - /*18*/ u16 disk_leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - - /*20*/ u16 intclr; - u16 reserved8; - /*24*/ u16 intset; - u16 reserved9; - /*28*/ u16 intclr_mask; - u16 reserved10; - /*2C*/ u16 intset_mask; - u16 reserved11; - - /*30*/ u16 sig_status; - u16 reserved12; - /*34*/ u16 int_status; - u16 reserved13; - /*38*/ u16 reserved14; - u16 reserved15; - /*3C*/ u16 reserved16; - u16 reserved17; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_ETH 0x0001 -#define BCSR_RESETS_CAMERA 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_IDE 0x0008 -#define BCSR_RESETS_TV 0x0010 -/* Not resets but in the same register */ -#define BCSR_RESETS_PWMR1MUX 0x0800 -#define BCSR_RESETS_PCS0MUX 0x1000 -#define BCSR_RESETS_PCS1MUX 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_LCDVEE 0x0001 -#define BCSR_BOARD_LCDVDD 0x0002 -#define BCSR_BOARD_LCDBL 0x0004 -#define BCSR_BOARD_CAMSNAP 0x0010 -#define BCSR_BOARD_CAMPWR 0x0020 -#define BCSR_BOARD_SD0PWR 0x0040 - -#define BCSR_LEDS_DECIMALS 0x0003 -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - /* Bit positions for the different interrupt sources */ #define BCSR_INT_IDE 0x0001 #define BCSR_INT_ETH 0x0002 @@ -168,17 +44,15 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; #define BCSR_INT_SD0INSERT 0x1000 #define BCSR_INT_SD0EJECT 0x2000 -#define SMC91C111_PHYS_ADDR 0x19000300 -#define SMC91C111_INT DB1200_ETH_INT - #define IDE_PHYS_ADDR 0x18800000 #define IDE_REG_SHIFT 5 -#define IDE_PHYS_LEN (16 << IDE_REG_SHIFT) -#define IDE_INT DB1200_IDE_INT #define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1 #define IDE_RQSIZE 128 -#define NAND_PHYS_ADDR 0x20000000 +#define DB1200_IDE_PHYS_ADDR IDE_PHYS_ADDR +#define DB1200_IDE_PHYS_LEN (16 << IDE_REG_SHIFT) +#define DB1200_ETH_PHYS_ADDR 0x19000300 +#define DB1200_NAND_PHYS_ADDR 0x20000000 /* * External Interrupts for DBAu1200 as of 8/6/2004. @@ -188,7 +62,7 @@ static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; * Example: IDE bis pos is = 64 - 64 * ETH bit pos is = 65 - 64 */ -enum external_pb1200_ints { +enum external_db1200_ints { DB1200_INT_BEGIN = AU1000_MAX_INTR + 1, DB1200_IDE_INT = DB1200_INT_BEGIN, @@ -209,22 +83,4 @@ enum external_pb1200_ints { DB1200_INT_END = DB1200_INT_BEGIN + 15, }; - -/* - * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c - */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -#define BOARD_PC0_INT DB1200_PC0_INT -#define BOARD_PC1_INT DB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) - -/* NAND chip select */ -#define NAND_CS 1 - #endif /* __ASM_DB1200_H */ diff --git a/arch/mips/include/asm/mach-db1x00/db1x00.h b/arch/mips/include/asm/mach-db1x00/db1x00.h index 1a515b8c870..a919dac525a 100644 --- a/arch/mips/include/asm/mach-db1x00/db1x00.h +++ b/arch/mips/include/asm/mach-db1x00/db1x00.h @@ -41,111 +41,11 @@ #define SMBUS_PSC_BASE PSC2_BASE_ADDR #define I2S_PSC_BASE PSC3_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xAF000000 #define NAND_PHYS_ADDR 0x20000000 -#else -#define BCSR_KSEG1_ADDR 0xAE000000 #endif /* - * Overlay data structure of the DBAu1x00 board registers. - * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx. - */ -typedef volatile struct -{ - /*00*/ unsigned short whoami; - unsigned short reserved0; - /*04*/ unsigned short status; - unsigned short reserved1; - /*08*/ unsigned short switches; - unsigned short reserved2; - /*0C*/ unsigned short resets; - unsigned short reserved3; - /*10*/ unsigned short pcmcia; - unsigned short reserved4; - /*14*/ unsigned short specific; - unsigned short reserved5; - /*18*/ unsigned short leds; - unsigned short reserved6; - /*1C*/ unsigned short swreset; - unsigned short reserved7; - -} BCSR; - - -/* - * Register/mask bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PC0VS 0x0003 -#define BCSR_STATUS_PC1VS 0x000C -#define BCSR_STATUS_PC0FI 0x0010 -#define BCSR_STATUS_PC1FI 0x0020 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_ROMBUSY 0x0400 -#define BCSR_STATUS_SWAPBOOT 0x2000 -#define BCSR_STATUS_FLASHDEN 0xC000 - -#define BCSR_SWITCHES_DIP 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_PHY0 0x0001 -#define BCSR_RESETS_PHY1 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_FIR_SEL 0x2000 -#define BCSR_RESETS_IRDA_MODE_MASK 0xC000 -#define BCSR_RESETS_IRDA_MODE_FULL 0x0000 -#define BCSR_RESETS_IRDA_MODE_OFF 0x4000 -#define BCSR_RESETS_IRDA_MODE_2_3 0x8000 -#define BCSR_RESETS_IRDA_MODE_1_3 0xC000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_PCIM66EN 0x0001 -#define BCSR_BOARD_SD0_PWR 0x0040 -#define BCSR_BOARD_SD1_PWR 0x0080 -#define BCSR_BOARD_PCIM33 0x0100 -#define BCSR_BOARD_GPIO200RST 0x0400 -#define BCSR_BOARD_PCICFG 0x1000 -#define BCSR_BOARD_SD0_WP 0x4000 -#define BCSR_BOARD_SD1_WP 0x8000 - -#define BCSR_LEDS_DECIMALS 0x0003 -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SWRESET_RESET 0x0080 - -/* PCMCIA DBAu1x00 specific defines */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT)\ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -/* * NAND defines * * Timing values as described in databook, * ns value stripped of the diff --git a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h index 9947e57c91d..16210cedd92 100644 --- a/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h @@ -3,7 +3,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com> + * Copyright (C) 2009 Wu Zhangjin <wuzhangjin@gmail.com> * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca> * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org> * diff --git a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h index 6305bea7e18..21c4ecedebe 100644 --- a/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h +++ b/arch/mips/include/asm/mach-loongson/cs5536/cs5536_vsm.h @@ -2,7 +2,7 @@ * the read/write interfaces for Virtual Support Module(VSM) * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ #ifndef _CS5536_VSM_H diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index ee8bc837697..1cf7b1401ee 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -1,12 +1,11 @@ /* * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * */ #ifndef __ASM_MACH_LOONGSON_LOONGSON_H @@ -23,7 +22,7 @@ extern void mach_prepare_reboot(void); extern void mach_prepare_shutdown(void); /* environment arguments from bootloader */ -extern unsigned long bus_clock, cpu_clock_freq; +extern unsigned long cpu_clock_freq; extern unsigned long memsize, highmemsize; /* loongson-specific command line, env and memory initialization */ diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h index acf8359cb13..43213388c17 100644 --- a/arch/mips/include/asm/mach-loongson/machine.h +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -1,6 +1,6 @@ /* - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology - * Author: Wu Zhangjin <wuzj@lemote.com> + * Copyright (C) 2009 Lemote, Inc. + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h index e9960f341b9..3b23ee8647d 100644 --- a/arch/mips/include/asm/mach-loongson/mem.h +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index a199a4f6de4..bc99dab4ef6 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -1,23 +1,12 @@ /* * Copyright (c) 2008 Zhang Le <r0bertz@gentoo.org> - * Copyright (c) 2009 Wu Zhangjin <wuzj@lemote.com> + * Copyright (c) 2009 Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it * and/or modify it under the terms of the GNU General * Public License as published by the Free Software * Foundation; either version 2 of the License, or (at your * option) any later version. - * - * This program is distributed in the hope that it will be - * useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public - * License along with this program; if not, write to the Free - * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA - * 02139, USA. */ #ifndef __ASM_MACH_LOONGSON_PCI_H_ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1100.h b/arch/mips/include/asm/mach-pb1x00/pb1100.h deleted file mode 100644 index b1a60f1cbd0..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1100.h +++ /dev/null @@ -1,85 +0,0 @@ -/* - * Alchemy Semi Pb1100 Referrence Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1100_H -#define __ASM_PB1100_H - -#define PB1100_IDENT 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -# define PB1100_ROM_SEL (1 << 15) -# define PB1100_ROM_SIZ (1 << 14) -# define PB1100_SWAP_BOOT (1 << 13) -# define PB1100_FLASH_WP (1 << 12) -# define PB1100_ROM_H_STS (1 << 11) -# define PB1100_ROM_L_STS (1 << 10) -# define PB1100_FLASH_H_STS (1 << 9) -# define PB1100_FLASH_L_STS (1 << 8) -# define PB1100_SRAM_SIZ (1 << 7) -# define PB1100_TSC_BUSY (1 << 6) -# define PB1100_PCMCIA_VS_MASK (3 << 4) -# define PB1100_RS232_CD (1 << 3) -# define PB1100_RS232_CTS (1 << 2) -# define PB1100_RS232_DSR (1 << 1) -# define PB1100_RS232_RI (1 << 0) - -#define PB1100_IRDA_RS232 0xAE00000C -# define PB1100_IRDA_FULL (0 << 14) /* full power */ -# define PB1100_IRDA_SHUTDOWN (1 << 14) -# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */ -# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */ -# define PB1100_IRDA_FIR (1 << 13) - -#define PCMCIA_BOARD_REG 0xAE000010 -# define PB1100_SD_WP1_RO (1 << 15) /* read only */ -# define PB1100_SD_WP0_RO (1 << 14) /* read only */ -# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */ -# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */ -# define PB1100_SEL_SD_CONN1 (1 << 9) -# define PB1100_SEL_SD_CONN0 (1 << 8) -# define PC_DEASSERT_RST (1 << 7) -# define PC_DRV_EN (1 << 4) - -#define PB1100_G_CONTROL 0xAE000014 /* graphics control */ - -#define PB1100_RST_VDDI 0xAE00001C -# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */ -# define PB1100_VDDI_MASK 0x1F - -#define PB1100_LEDS 0xAE000018 - -/* - * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED. - * 7:0 is the LED Display's decimal points. - */ -#define PB1100_HEX_LED 0xAE000018 - -/* PCMCIA Pb1100 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) - -#endif /* __ASM_PB1100_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1200.h b/arch/mips/include/asm/mach-pb1x00/pb1200.h index c8618df88cb..962eb55dc88 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1200.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1200.h @@ -25,6 +25,7 @@ #define __ASM_PB1200_H #include <linux/types.h> +#include <asm/mach-au1x00/au1000.h> #include <asm/mach-au1x00/au1xxx_psc.h> #define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX @@ -43,113 +44,8 @@ * Refer to board documentation. */ #define AC97_PSC_BASE PSC1_BASE_ADDR -#define I2S_PSC_BASE PSC1_BASE_ADDR +#define I2S_PSC_BASE PSC1_BASE_ADDR -#define BCSR_KSEG1_ADDR 0xAD800000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 board; - u16 reserved5; - /*18*/ u16 disk_leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - - /*20*/ u16 intclr; - u16 reserved8; - /*24*/ u16 intset; - u16 reserved9; - /*28*/ u16 intclr_mask; - u16 reserved10; - /*2C*/ u16 intset_mask; - u16 reserved11; - - /*30*/ u16 sig_status; - u16 reserved12; - /*34*/ u16 int_status; - u16 reserved13; - /*38*/ u16 reserved14; - u16 reserved15; - /*3C*/ u16 reserved16; - u16 reserved17; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_IDECBLID 0x0200 -#define BCSR_STATUS_SD0WP 0x0400 -#define BCSR_STATUS_SD1WP 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_ETH 0x0001 -#define BCSR_RESETS_CAMERA 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_IDE 0x0008 -/* not resets but in the same register */ -#define BCSR_RESETS_WSCFSM 0x0800 -#define BCSR_RESETS_PCS0MUX 0x1000 -#define BCSR_RESETS_PCS1MUX 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_SD1MUX 0x8000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_BOARD_LCDVEE 0x0001 -#define BCSR_BOARD_LCDVDD 0x0002 -#define BCSR_BOARD_LCDBL 0x0004 -#define BCSR_BOARD_CAMSNAP 0x0010 -#define BCSR_BOARD_CAMPWR 0x0020 -#define BCSR_BOARD_SD0PWR 0x0040 -#define BCSR_BOARD_SD1PWR 0x0080 - -#define BCSR_LEDS_DECIMALS 0x00FF -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 #define BCSR_SYSTEM_VDDI 0x001F #define BCSR_SYSTEM_POWEROFF 0x4000 @@ -239,20 +135,6 @@ enum external_pb1200_ints { PB1200_INT_END = PB1200_INT_BEGIN + 15 }; -/* - * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c - */ -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - -#define BOARD_PC0_INT PB1200_PC0_INT -#define BOARD_PC1_INT PB1200_PC1_INT -#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET))) - /* NAND chip select */ #define NAND_CS 1 diff --git a/arch/mips/include/asm/mach-pb1x00/pb1500.h b/arch/mips/include/asm/mach-pb1x00/pb1500.h deleted file mode 100644 index da51a2eb7b8..00000000000 --- a/arch/mips/include/asm/mach-pb1x00/pb1500.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * Alchemy Semi Pb1500 Referrence Board - * - * Copyright 2001, 2008 MontaVista Software Inc. - * Author: MontaVista Software, Inc. <source@mvista.com> - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#ifndef __ASM_PB1500_H -#define __ASM_PB1500_H - -#define IDENT_BOARD_REG 0xAE000000 -#define BOARD_STATUS_REG 0xAE000004 -#define PCI_BOARD_REG 0xAE000010 -#define PCMCIA_BOARD_REG 0xAE000010 -# define PC_DEASSERT_RST 0x80 -# define PC_DRV_EN 0x10 -#define PB1500_G_CONTROL 0xAE000014 -#define PB1500_RST_VDDI 0xAE00001C -#define PB1500_LEDS 0xAE000018 - -#define PB1500_HEX_LED 0xAF000004 -#define PB1500_HEX_LED_BLANK 0xAF000008 - -/* PCMCIA Pb1500 specific defines */ -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0)) - -#endif /* __ASM_PB1500_H */ diff --git a/arch/mips/include/asm/mach-pb1x00/pb1550.h b/arch/mips/include/asm/mach-pb1x00/pb1550.h index 6704a11497d..58796410bd6 100644 --- a/arch/mips/include/asm/mach-pb1x00/pb1550.h +++ b/arch/mips/include/asm/mach-pb1x00/pb1550.h @@ -40,102 +40,6 @@ #define SMBUS_PSC_BASE PSC2_BASE_ADDR #define I2S_PSC_BASE PSC3_BASE_ADDR -#define BCSR_PHYS_ADDR 0xAF000000 - -typedef volatile struct -{ - /*00*/ u16 whoami; - u16 reserved0; - /*04*/ u16 status; - u16 reserved1; - /*08*/ u16 switches; - u16 reserved2; - /*0C*/ u16 resets; - u16 reserved3; - /*10*/ u16 pcmcia; - u16 reserved4; - /*14*/ u16 pci; - u16 reserved5; - /*18*/ u16 leds; - u16 reserved6; - /*1C*/ u16 system; - u16 reserved7; - -} BCSR; - -static BCSR * const bcsr = (BCSR *)BCSR_PHYS_ADDR; - -/* - * Register bit definitions for the BCSRs - */ -#define BCSR_WHOAMI_DCID 0x000F -#define BCSR_WHOAMI_CPLD 0x00F0 -#define BCSR_WHOAMI_BOARD 0x0F00 - -#define BCSR_STATUS_PCMCIA0VS 0x0003 -#define BCSR_STATUS_PCMCIA1VS 0x000C -#define BCSR_STATUS_PCMCIA0FI 0x0010 -#define BCSR_STATUS_PCMCIA1FI 0x0020 -#define BCSR_STATUS_SWAPBOOT 0x0040 -#define BCSR_STATUS_SRAMWIDTH 0x0080 -#define BCSR_STATUS_FLASHBUSY 0x0100 -#define BCSR_STATUS_ROMBUSY 0x0200 -#define BCSR_STATUS_USBOTGID 0x0800 -#define BCSR_STATUS_U0RXD 0x1000 -#define BCSR_STATUS_U1RXD 0x2000 -#define BCSR_STATUS_U3RXD 0x8000 - -#define BCSR_SWITCHES_OCTAL 0x00FF -#define BCSR_SWITCHES_DIP_1 0x0080 -#define BCSR_SWITCHES_DIP_2 0x0040 -#define BCSR_SWITCHES_DIP_3 0x0020 -#define BCSR_SWITCHES_DIP_4 0x0010 -#define BCSR_SWITCHES_DIP_5 0x0008 -#define BCSR_SWITCHES_DIP_6 0x0004 -#define BCSR_SWITCHES_DIP_7 0x0002 -#define BCSR_SWITCHES_DIP_8 0x0001 -#define BCSR_SWITCHES_ROTARY 0x0F00 - -#define BCSR_RESETS_PHY0 0x0001 -#define BCSR_RESETS_PHY1 0x0002 -#define BCSR_RESETS_DC 0x0004 -#define BCSR_RESETS_WSC 0x2000 -#define BCSR_RESETS_SPISEL 0x4000 -#define BCSR_RESETS_DMAREQ 0x8000 - -#define BCSR_PCMCIA_PC0VPP 0x0003 -#define BCSR_PCMCIA_PC0VCC 0x000C -#define BCSR_PCMCIA_PC0DRVEN 0x0010 -#define BCSR_PCMCIA_PC0RST 0x0080 -#define BCSR_PCMCIA_PC1VPP 0x0300 -#define BCSR_PCMCIA_PC1VCC 0x0C00 -#define BCSR_PCMCIA_PC1DRVEN 0x1000 -#define BCSR_PCMCIA_PC1RST 0x8000 - -#define BCSR_PCI_M66EN 0x0001 -#define BCSR_PCI_M33 0x0100 -#define BCSR_PCI_EXTERNARB 0x0200 -#define BCSR_PCI_GPIO200RST 0x0400 -#define BCSR_PCI_CLKOUT 0x0800 -#define BCSR_PCI_CFGHOST 0x1000 - -#define BCSR_LEDS_DECIMALS 0x00FF -#define BCSR_LEDS_LED0 0x0100 -#define BCSR_LEDS_LED1 0x0200 -#define BCSR_LEDS_LED2 0x0400 -#define BCSR_LEDS_LED3 0x0800 - -#define BCSR_SYSTEM_VDDI 0x001F -#define BCSR_SYSTEM_POWEROFF 0x4000 -#define BCSR_SYSTEM_RESET 0x8000 - -#define PCMCIA_MAX_SOCK 1 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) - -/* VPP/VCC */ -#define SET_VCC_VPP(VCC, VPP, SLOT) \ - ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8)) - #if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER) #define PB1550_BOTH_BANKS #elif defined(CONFIG_MTD_PB1550_BOOT) && !defined(CONFIG_MTD_PB1550_USER) diff --git a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h index 657f089b172..6d70264557b 100644 --- a/arch/mips/include/asm/mach-pnx833x/irq-mapping.h +++ b/arch/mips/include/asm/mach-pnx833x/irq-mapping.h @@ -123,4 +123,3 @@ #define PNX833X_GPIO_15_INT (PNX833X_GPIO_IRQ_BASE + 15) #endif - diff --git a/arch/mips/include/asm/mach-powertv/interrupts.h b/arch/mips/include/asm/mach-powertv/interrupts.h index 629a5741365..4fd652ceb52 100644 --- a/arch/mips/include/asm/mach-powertv/interrupts.h +++ b/arch/mips/include/asm/mach-powertv/interrupts.h @@ -251,4 +251,3 @@ * channel 3. */ #define irq_mpeg_d (ibase+0) /* MPEG Decoder Interrupt */ #endif /* _ASM_MACH_POWERTV_INTERRUPTS_H_ */ - diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index f4ab3139d73..49382d5e891 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -251,6 +251,14 @@ #define PL_256M 28 /* + * PageGrain bits + */ +#define PG_RIE (_ULCAST_(1) << 31) +#define PG_XIE (_ULCAST_(1) << 30) +#define PG_ELPA (_ULCAST_(1) << 29) +#define PG_ESP (_ULCAST_(1) << 28) + +/* * R4x00 interrupt enable / cause bits */ #define IE_SW0 (_ULCAST_(1) << 8) @@ -576,6 +584,10 @@ #define MIPS_CONF3_DSP (_ULCAST_(1) << 10) #define MIPS_CONF3_ULRI (_ULCAST_(1) << 13) +#define MIPS_CONF4_MMUSIZEEXT (_ULCAST_(255) << 0) +#define MIPS_CONF4_MMUEXTDEF (_ULCAST_(3) << 14) +#define MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT (_ULCAST_(1) << 14) + #define MIPS_CONF7_WII (_ULCAST_(1) << 31) #define MIPS_CONF7_RPS (_ULCAST_(1) << 2) @@ -826,6 +838,9 @@ do { \ #define read_c0_pagemask() __read_32bit_c0_register($5, 0) #define write_c0_pagemask(val) __write_32bit_c0_register($5, 0, val) +#define read_c0_pagegrain() __read_32bit_c0_register($5, 1) +#define write_c0_pagegrain(val) __write_32bit_c0_register($5, 1, val) + #define read_c0_wired() __read_32bit_c0_register($6, 0) #define write_c0_wired(val) __write_32bit_c0_register($6, 0, val) diff --git a/arch/mips/include/asm/msc01_ic.h b/arch/mips/include/asm/msc01_ic.h index 7989b9ffc1d..d92406ae284 100644 --- a/arch/mips/include/asm/msc01_ic.h +++ b/arch/mips/include/asm/msc01_ic.h @@ -145,4 +145,3 @@ extern void __init init_msc_irqs(unsigned long icubase, unsigned int base, msc_i extern void ll_msc_irq(void); #endif /* __ASM_MIPS_BOARDS_MSC01_IC_H */ - diff --git a/arch/mips/include/asm/nile4.h b/arch/mips/include/asm/nile4.h index c3ca959aa4d..af0e51a9f68 100644 --- a/arch/mips/include/asm/nile4.h +++ b/arch/mips/include/asm/nile4.h @@ -307,4 +307,3 @@ extern u8 nile4_i8259_iack(void); extern void nile4_dump_irq_status(void); /* Debug */ #endif - diff --git a/arch/mips/include/asm/octeon/octeon-feature.h b/arch/mips/include/asm/octeon/octeon-feature.h index ef24a7b4ea5..cba6fbed9f4 100644 --- a/arch/mips/include/asm/octeon/octeon-feature.h +++ b/arch/mips/include/asm/octeon/octeon-feature.h @@ -99,6 +99,8 @@ static inline int octeon_has_feature(enum octeon_feature feature) return !cvmx_fuse_read(90); case OCTEON_FEATURE_PCIE: + case OCTEON_FEATURE_MGMT_PORT: + case OCTEON_FEATURE_RAID: return OCTEON_IS_MODEL(OCTEON_CN56XX) || OCTEON_IS_MODEL(OCTEON_CN52XX); @@ -110,12 +112,6 @@ static inline int octeon_has_feature(enum octeon_feature feature) case OCTEON_FEATURE_TRA: return !(OCTEON_IS_MODEL(OCTEON_CN30XX) || OCTEON_IS_MODEL(OCTEON_CN50XX)); - case OCTEON_FEATURE_MGMT_PORT: - return OCTEON_IS_MODEL(OCTEON_CN56XX) - || OCTEON_IS_MODEL(OCTEON_CN52XX); - case OCTEON_FEATURE_RAID: - return OCTEON_IS_MODEL(OCTEON_CN56XX) - || OCTEON_IS_MODEL(OCTEON_CN52XX); case OCTEON_FEATURE_USB: return !(OCTEON_IS_MODEL(OCTEON_CN38XX) || OCTEON_IS_MODEL(OCTEON_CN58XX)); diff --git a/arch/mips/include/asm/octeon/octeon.h b/arch/mips/include/asm/octeon/octeon.h index 4d0a8c61fc3..ca6214b5ccb 100644 --- a/arch/mips/include/asm/octeon/octeon.h +++ b/arch/mips/include/asm/octeon/octeon.h @@ -213,6 +213,11 @@ struct octeon_cf_data { int dma_engine; /* -1 for no DMA */ }; +struct octeon_i2c_data { + unsigned int sys_freq; + unsigned int i2c_freq; +}; + extern void octeon_write_lcd(const char *s); extern void octeon_check_cpu_bist(void); extern int octeon_get_boot_debug_flag(void); diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h index f266295cce5..ac32572430f 100644 --- a/arch/mips/include/asm/page.h +++ b/arch/mips/include/asm/page.h @@ -107,18 +107,6 @@ typedef struct { unsigned long pte; } pte_t; typedef struct page *pgtable_t; /* - * For 3-level pagetables we defines these ourselves, for 2-level the - * definitions are supplied by <asm-generic/pgtable-nopmd.h>. - */ -#ifdef CONFIG_64BIT - -typedef struct { unsigned long pmd; } pmd_t; -#define pmd_val(x) ((x).pmd) -#define __pmd(x) ((pmd_t) { (x) } ) - -#endif - -/* * Right now we don't support 4-level pagetables, so all pud-related * definitions come from <asm-generic/pgtable-nopud.h>. */ diff --git a/arch/mips/include/asm/param.h b/arch/mips/include/asm/param.h index 1d9bb8c5ab2..da3920fce9a 100644 --- a/arch/mips/include/asm/param.h +++ b/arch/mips/include/asm/param.h @@ -9,23 +9,8 @@ #ifndef _ASM_PARAM_H #define _ASM_PARAM_H -#ifdef __KERNEL__ - -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* .. some user interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#endif - -#ifndef HZ -#define HZ 100 -#endif - #define EXEC_PAGESIZE 65536 -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ +#include <asm-generic/param.h> #endif /* _ASM_PARAM_H */ diff --git a/arch/mips/include/asm/parport.h b/arch/mips/include/asm/parport.h index f52656826cc..cf252af6459 100644 --- a/arch/mips/include/asm/parport.h +++ b/arch/mips/include/asm/parport.h @@ -1,15 +1 @@ -/* - * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> - * - * This file should only be included by drivers/parport/parport_pc.c. - */ -#ifndef _ASM_PARPORT_H -#define _ASM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports(int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports(int autoirq, int autodma) -{ - return parport_pc_find_isa_ports(autoirq, autodma); -} - -#endif /* _ASM_PARPORT_H */ +#include <asm-generic/parport.h> diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h index 3738f4b48cb..881d18b4e29 100644 --- a/arch/mips/include/asm/pgalloc.h +++ b/arch/mips/include/asm/pgalloc.h @@ -31,7 +31,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, */ extern void pmd_init(unsigned long page, unsigned long pagetable); -#ifdef CONFIG_64BIT +#ifndef __PAGETABLE_PMD_FOLDED static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd) { @@ -104,7 +104,7 @@ do { \ tlb_remove_page((tlb), pte); \ } while (0) -#ifdef CONFIG_64BIT +#ifndef __PAGETABLE_PMD_FOLDED static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address) { diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index 55813d6150c..ae90412556d 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -127,8 +127,8 @@ pfn_pte(unsigned long pfn, pgprot_t prot) #define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) #define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) #else -#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) -#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((unsigned long long)(pfn) << _PFN_SHIFT) | pgprot_val(prot)) #endif #endif /* defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) */ diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 8eda30b467d..26dc69d792a 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -16,7 +16,11 @@ #include <asm/cachectl.h> #include <asm/fixmap.h> +#ifdef CONFIG_PAGE_SIZE_64KB +#include <asm-generic/pgtable-nopmd.h> +#else #include <asm-generic/pgtable-nopud.h> +#endif /* * Each address space has 2 4K pages as its page directory, giving 1024 @@ -37,13 +41,20 @@ * fault address - VMALLOC_START. */ + +/* PGDIR_SHIFT determines what a third-level page table entry can map */ +#ifdef __PAGETABLE_PMD_FOLDED +#define PGDIR_SHIFT (PAGE_SHIFT + PAGE_SHIFT + PTE_ORDER - 3) +#else + /* PMD_SHIFT determines the size of the area a second-level page table can map */ #define PMD_SHIFT (PAGE_SHIFT + (PAGE_SHIFT + PTE_ORDER - 3)) #define PMD_SIZE (1UL << PMD_SHIFT) #define PMD_MASK (~(PMD_SIZE-1)) -/* PGDIR_SHIFT determines what a third-level page table entry can map */ + #define PGDIR_SHIFT (PMD_SHIFT + (PAGE_SHIFT + PMD_ORDER - 3)) +#endif #define PGDIR_SIZE (1UL << PGDIR_SHIFT) #define PGDIR_MASK (~(PGDIR_SIZE-1)) @@ -92,12 +103,14 @@ #ifdef CONFIG_PAGE_SIZE_64KB #define PGD_ORDER 0 #define PUD_ORDER aieeee_attempt_to_allocate_pud -#define PMD_ORDER 0 +#define PMD_ORDER aieeee_attempt_to_allocate_pmd #define PTE_ORDER 0 #endif #define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t)) +#ifndef __PAGETABLE_PMD_FOLDED #define PTRS_PER_PMD ((PAGE_SIZE << PMD_ORDER) / sizeof(pmd_t)) +#endif #define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t)) #if PGDIR_SIZE >= TASK_SIZE @@ -122,15 +135,30 @@ #define pte_ERROR(e) \ printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e)) +#ifndef __PAGETABLE_PMD_FOLDED #define pmd_ERROR(e) \ printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e)) +#endif #define pgd_ERROR(e) \ printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e)) extern pte_t invalid_pte_table[PTRS_PER_PTE]; extern pte_t empty_bad_page_table[PTRS_PER_PTE]; + + +#ifndef __PAGETABLE_PMD_FOLDED +/* + * For 3-level pagetables we defines these ourselves, for 2-level the + * definitions are supplied by <asm-generic/pgtable-nopmd.h>. + */ +typedef struct { unsigned long pmd; } pmd_t; +#define pmd_val(x) ((x).pmd) +#define __pmd(x) ((pmd_t) { (x) } ) + + extern pmd_t invalid_pmd_table[PTRS_PER_PMD]; extern pmd_t empty_bad_pmd_table[PTRS_PER_PMD]; +#endif /* * Empty pgd/pmd entries point to the invalid_pte_table. @@ -151,6 +179,7 @@ static inline void pmd_clear(pmd_t *pmdp) { pmd_val(*pmdp) = ((unsigned long) invalid_pte_table); } +#ifndef __PAGETABLE_PMD_FOLDED /* * Empty pud entries point to the invalid_pmd_table. @@ -174,6 +203,7 @@ static inline void pud_clear(pud_t *pudp) { pud_val(*pudp) = ((unsigned long) invalid_pmd_table); } +#endif #define pte_page(x) pfn_to_page(pte_pfn(x)) @@ -181,8 +211,8 @@ static inline void pud_clear(pud_t *pudp) #define pte_pfn(x) ((unsigned long)((x).pte >> (PAGE_SHIFT + 2))) #define pfn_pte(pfn, prot) __pte(((pfn) << (PAGE_SHIFT + 2)) | pgprot_val(prot)) #else -#define pte_pfn(x) ((unsigned long)((x).pte >> PAGE_SHIFT)) -#define pfn_pte(pfn, prot) __pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot)) +#define pte_pfn(x) ((unsigned long)((x).pte >> _PFN_SHIFT)) +#define pfn_pte(pfn, prot) __pte(((pfn) << _PFN_SHIFT) | pgprot_val(prot)) #endif #define __pgd_offset(address) pgd_index(address) @@ -198,6 +228,7 @@ static inline void pud_clear(pud_t *pudp) /* to find an entry in a page-table-directory */ #define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr)) +#ifndef __PAGETABLE_PMD_FOLDED static inline unsigned long pud_page_vaddr(pud_t pud) { return pud_val(pud); @@ -210,6 +241,7 @@ static inline pmd_t *pmd_offset(pud_t * pud, unsigned long address) { return (pmd_t *) pud_page_vaddr(*pud) + pmd_index(address); } +#endif /* Find an entry in the third-level page table.. */ #define __pte_offset(address) \ diff --git a/arch/mips/include/asm/pgtable-bits.h b/arch/mips/include/asm/pgtable-bits.h index 1073e6df862..e9fe7e97ce4 100644 --- a/arch/mips/include/asm/pgtable-bits.h +++ b/arch/mips/include/asm/pgtable-bits.h @@ -50,7 +50,7 @@ #define _CACHE_SHIFT 3 #define _CACHE_MASK (7<<3) -#else +#elif defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) #define _PAGE_PRESENT (1<<0) /* implemented in software */ #define _PAGE_READ (1<<1) /* implemented in software */ @@ -59,8 +59,6 @@ #define _PAGE_MODIFIED (1<<4) /* implemented in software */ #define _PAGE_FILE (1<<4) /* set:pagecache unset:swap */ -#if defined(CONFIG_CPU_R3000) || defined(CONFIG_CPU_TX39XX) - #define _PAGE_GLOBAL (1<<8) #define _PAGE_VALID (1<<9) #define _PAGE_SILENT_READ (1<<9) /* synonym */ @@ -69,21 +67,113 @@ #define _CACHE_UNCACHED (1<<11) #define _CACHE_MASK (1<<11) +#else /* 'Normal' r4K case */ +/* + * When using the RI/XI bit support, we have 13 bits of flags below + * the physical address. The RI/XI bits are placed such that a SRL 5 + * can strip off the software bits, then a ROTR 2 can move the RI/XI + * into bits [63:62]. This also limits physical address to 56 bits, + * which is more than we need right now. + */ + +/* implemented in software */ +#define _PAGE_PRESENT_SHIFT (0) +#define _PAGE_PRESENT (1 << _PAGE_PRESENT_SHIFT) +/* implemented in software, should be unused if kernel_uses_smartmips_rixi. */ +#define _PAGE_READ_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_PRESENT_SHIFT : _PAGE_PRESENT_SHIFT + 1) +#define _PAGE_READ ({if (kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_READ_SHIFT; }) +/* implemented in software */ +#define _PAGE_WRITE_SHIFT (_PAGE_READ_SHIFT + 1) +#define _PAGE_WRITE (1 << _PAGE_WRITE_SHIFT) +/* implemented in software */ +#define _PAGE_ACCESSED_SHIFT (_PAGE_WRITE_SHIFT + 1) +#define _PAGE_ACCESSED (1 << _PAGE_ACCESSED_SHIFT) +/* implemented in software */ +#define _PAGE_MODIFIED_SHIFT (_PAGE_ACCESSED_SHIFT + 1) +#define _PAGE_MODIFIED (1 << _PAGE_MODIFIED_SHIFT) +/* set:pagecache unset:swap */ +#define _PAGE_FILE (_PAGE_MODIFIED) + +#ifdef CONFIG_HUGETLB_PAGE +/* huge tlb page */ +#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT + 1) +#define _PAGE_HUGE (1 << _PAGE_HUGE_SHIFT) #else +#define _PAGE_HUGE_SHIFT (_PAGE_MODIFIED_SHIFT) +#define _PAGE_HUGE ({BUG(); 1; }) /* Dummy value */ +#endif -#define _PAGE_R4KBUG (1<<5) /* workaround for r4k bug */ -#define _PAGE_HUGE (1<<5) /* huge tlb page */ -#define _PAGE_GLOBAL (1<<6) -#define _PAGE_VALID (1<<7) -#define _PAGE_SILENT_READ (1<<7) /* synonym */ -#define _PAGE_DIRTY (1<<8) /* The MIPS dirty bit */ -#define _PAGE_SILENT_WRITE (1<<8) -#define _CACHE_SHIFT 9 -#define _CACHE_MASK (7<<9) +/* Page cannot be executed */ +#define _PAGE_NO_EXEC_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_HUGE_SHIFT + 1 : _PAGE_HUGE_SHIFT) +#define _PAGE_NO_EXEC ({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_EXEC_SHIFT; }) + +/* Page cannot be read */ +#define _PAGE_NO_READ_SHIFT (kernel_uses_smartmips_rixi ? _PAGE_NO_EXEC_SHIFT + 1 : _PAGE_NO_EXEC_SHIFT) +#define _PAGE_NO_READ ({if (!kernel_uses_smartmips_rixi) BUG(); 1 << _PAGE_NO_READ_SHIFT; }) + +#define _PAGE_GLOBAL_SHIFT (_PAGE_NO_READ_SHIFT + 1) +#define _PAGE_GLOBAL (1 << _PAGE_GLOBAL_SHIFT) + +#define _PAGE_VALID_SHIFT (_PAGE_GLOBAL_SHIFT + 1) +#define _PAGE_VALID (1 << _PAGE_VALID_SHIFT) +/* synonym */ +#define _PAGE_SILENT_READ (_PAGE_VALID) + +/* The MIPS dirty bit */ +#define _PAGE_DIRTY_SHIFT (_PAGE_VALID_SHIFT + 1) +#define _PAGE_DIRTY (1 << _PAGE_DIRTY_SHIFT) +#define _PAGE_SILENT_WRITE (_PAGE_DIRTY) + +#define _CACHE_SHIFT (_PAGE_DIRTY_SHIFT + 1) +#define _CACHE_MASK (7 << _CACHE_SHIFT) + +#define _PFN_SHIFT (PAGE_SHIFT - 12 + _CACHE_SHIFT + 3) -#endif #endif /* defined(CONFIG_64BIT_PHYS_ADDR && defined(CONFIG_CPU_MIPS32) */ +#ifndef _PFN_SHIFT +#define _PFN_SHIFT PAGE_SHIFT +#endif +#define _PFN_MASK (~((1 << (_PFN_SHIFT)) - 1)) + +#ifndef _PAGE_NO_READ +#define _PAGE_NO_READ ({BUG(); 0; }) +#define _PAGE_NO_READ_SHIFT ({BUG(); 0; }) +#endif +#ifndef _PAGE_NO_EXEC +#define _PAGE_NO_EXEC ({BUG(); 0; }) +#endif +#ifndef _PAGE_GLOBAL_SHIFT +#define _PAGE_GLOBAL_SHIFT ilog2(_PAGE_GLOBAL) +#endif + + +#ifndef __ASSEMBLY__ +/* + * pte_to_entrylo converts a page table entry (PTE) into a Mips + * entrylo0/1 value. + */ +static inline uint64_t pte_to_entrylo(unsigned long pte_val) +{ + if (kernel_uses_smartmips_rixi) { + int sa; +#ifdef CONFIG_32BIT + sa = 31 - _PAGE_NO_READ_SHIFT; +#else + sa = 63 - _PAGE_NO_READ_SHIFT; +#endif + /* + * C has no way to express that this is a DSRL + * _PAGE_NO_EXEC_SHIFT followed by a ROTR 2. Luckily + * in the fast path this is done in assembly + */ + return (pte_val >> _PAGE_GLOBAL_SHIFT) | + ((pte_val & (_PAGE_NO_EXEC | _PAGE_NO_READ)) << sa); + } + + return pte_val >> _PAGE_GLOBAL_SHIFT; +} +#endif /* * Cache attributes @@ -130,9 +220,9 @@ #endif -#define __READABLE (_PAGE_READ | _PAGE_SILENT_READ | _PAGE_ACCESSED) +#define __READABLE (_PAGE_SILENT_READ | _PAGE_ACCESSED | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ)) #define __WRITEABLE (_PAGE_WRITE | _PAGE_SILENT_WRITE | _PAGE_MODIFIED) -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) +#define _PAGE_CHG_MASK (_PFN_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) #endif /* _ASM_PGTABLE_BITS_H */ diff --git a/arch/mips/include/asm/pgtable.h b/arch/mips/include/asm/pgtable.h index 1854336e56a..93598ba0135 100644 --- a/arch/mips/include/asm/pgtable.h +++ b/arch/mips/include/asm/pgtable.h @@ -22,23 +22,24 @@ struct mm_struct; struct vm_area_struct; #define PAGE_NONE __pgprot(_PAGE_PRESENT | _CACHE_CACHABLE_NONCOHERENT) -#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_WRITE | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \ _page_cachable_default) -#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ - _page_cachable_default) -#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_READ | \ +#define PAGE_COPY __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \ + (kernel_uses_smartmips_rixi ? _PAGE_NO_EXEC : 0) | _page_cachable_default) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | \ _page_cachable_default) #define PAGE_KERNEL __pgprot(_PAGE_PRESENT | __READABLE | __WRITEABLE | \ _PAGE_GLOBAL | _page_cachable_default) -#define PAGE_USERIO __pgprot(_PAGE_PRESENT | _PAGE_READ | _PAGE_WRITE | \ +#define PAGE_USERIO __pgprot(_PAGE_PRESENT | (kernel_uses_smartmips_rixi ? 0 : _PAGE_READ) | _PAGE_WRITE | \ _page_cachable_default) #define PAGE_KERNEL_UNCACHED __pgprot(_PAGE_PRESENT | __READABLE | \ __WRITEABLE | _PAGE_GLOBAL | _CACHE_UNCACHED) /* - * MIPS can't do page protection for execute, and considers that the same like - * read. Also, write permissions imply read permissions. This is the closest - * we can get by reasonable means.. + * If _PAGE_NO_EXEC is not defined, we can't do page protection for + * execute, and consider it to be the same as read. Also, write + * permissions imply read permissions. This is the closest we can get + * by reasonable means.. */ /* @@ -177,7 +178,7 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *pt */ #define set_pmd(pmdptr, pmdval) do { *(pmdptr) = (pmdval); } while(0) -#ifdef CONFIG_64BIT +#ifndef __PAGETABLE_PMD_FOLDED /* * (puds are folded into pgds so this doesn't get actually called, * but the define is needed for a generic inline function.) @@ -298,8 +299,13 @@ static inline pte_t pte_mkdirty(pte_t pte) static inline pte_t pte_mkyoung(pte_t pte) { pte_val(pte) |= _PAGE_ACCESSED; - if (pte_val(pte) & _PAGE_READ) - pte_val(pte) |= _PAGE_SILENT_READ; + if (kernel_uses_smartmips_rixi) { + if (!(pte_val(pte) & _PAGE_NO_READ)) + pte_val(pte) |= _PAGE_SILENT_READ; + } else { + if (pte_val(pte) & _PAGE_READ) + pte_val(pte) |= _PAGE_SILENT_READ; + } return pte; } diff --git a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h index 14ca7dc382a..54ef1a96d7c 100644 --- a/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h +++ b/arch/mips/include/asm/pmc-sierra/msp71xx/msp_prom.h @@ -118,7 +118,6 @@ #define ZSP_DUET 'D' /* one DUET zsp engine */ #define ZSP_TRIAD 'T' /* two TRIAD zsp engines */ -extern char *prom_getcmdline(void); extern char *prom_getenv(char *name); extern void prom_init_cmdline(void); extern void prom_meminit(void); diff --git a/arch/mips/include/asm/serial.h b/arch/mips/include/asm/serial.h index c07ebd8eb9e..a0cb0caff15 100644 --- a/arch/mips/include/asm/serial.h +++ b/arch/mips/include/asm/serial.h @@ -1,22 +1 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1999 by Ralf Baechle - * Copyright (C) 1999, 2000 Silicon Graphics, Inc. - */ -#ifndef _ASM_SERIAL_H -#define _ASM_SERIAL_H - - -/* - * This assumes you have a 1.8432 MHz clock for your UART. - * - * It'd be nice if someone built a serial card with a 24.576 MHz - * clock, since the 16550A is capable of handling a top speed of 1.5 - * megabits/second; but this requires the faster clock. - */ -#define BASE_BAUD (1843200 / 16) - -#endif /* _ASM_SERIAL_H */ +#include <asm-generic/serial.h> diff --git a/arch/mips/include/asm/sgialib.h b/arch/mips/include/asm/sgialib.h index 63741ca1e42..2a2f1bddc27 100644 --- a/arch/mips/include/asm/sgialib.h +++ b/arch/mips/include/asm/sgialib.h @@ -33,14 +33,6 @@ extern int prom_flags; extern void prom_putchar(char c); extern char prom_getchar(void); -/* Memory descriptor management. */ -#define PROM_MAX_PMEMBLOCKS 32 -struct prom_pmemblock { - LONG base; /* Within KSEG0 or XKPHYS. */ - ULONG size; /* In bytes. */ - ULONG type; /* free or prom memory */ -}; - /* Get next memory descriptor after CURR, returns first descriptor * in chain is CURR is NULL. */ @@ -51,7 +43,6 @@ extern struct linux_mdesc *prom_getmdesc(struct linux_mdesc *curr); * array. */ extern void prom_meminit(void); -extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); /* PROM device tree library routines. */ #define PROM_NULL_COMPONENT ((pcomponent *) 0) @@ -62,20 +53,6 @@ extern pcomponent *ArcGetPeer(pcomponent *this); /* Get child component of THIS. */ extern pcomponent *ArcGetChild(pcomponent *this); -/* Get parent component of CHILD. */ -extern pcomponent *prom_getparent(pcomponent *child); - -/* Copy component opaque data of component THIS into BUFFER - * if component THIS has opaque data. Returns success or - * failure status. - */ -extern long prom_getcdata(void *buffer, pcomponent *this); - -/* Other misc. component routines. */ -extern pcomponent *prom_childadd(pcomponent *this, pcomponent *tmp, void *data); -extern long prom_delcomponent(pcomponent *this); -extern pcomponent *prom_componentbypath(char *path); - /* This is called at prom_init time to identify the * ARC architecture we are running on */ @@ -88,35 +65,13 @@ extern LONG ArcSetEnvironmentVariable(PCHAR name, PCHAR value); /* ARCS command line parsing. */ extern void prom_init_cmdline(void); -/* Acquiring info about the current time, etc. */ -extern struct linux_tinfo *prom_gettinfo(void); -extern unsigned long prom_getrtime(void); - /* File operations. */ -extern long prom_getvdirent(unsigned long fd, struct linux_vdirent *ent, unsigned long num, unsigned long *cnt); -extern long prom_open(char *name, enum linux_omode md, unsigned long *fd); -extern long prom_close(unsigned long fd); extern LONG ArcRead(ULONG fd, PVOID buf, ULONG num, PULONG cnt); -extern long prom_getrstatus(unsigned long fd); extern LONG ArcWrite(ULONG fd, PVOID buf, ULONG num, PULONG cnt); -extern long prom_seek(unsigned long fd, struct linux_bigint *off, enum linux_seekmode sm); -extern long prom_mount(char *name, enum linux_mountops op); -extern long prom_getfinfo(unsigned long fd, struct linux_finfo *buf); -extern long prom_setfinfo(unsigned long fd, unsigned long flags, unsigned long msk); - -/* Running stand-along programs. */ -extern long prom_load(char *name, unsigned long end, unsigned long *pc, unsigned long *eaddr); -extern long prom_invoke(unsigned long pc, unsigned long sp, long argc, char **argv, char **envp); -extern long prom_exec(char *name, long argc, char **argv, char **envp); /* Misc. routines. */ -extern VOID prom_halt(VOID) __attribute__((noreturn)); -extern VOID prom_powerdown(VOID) __attribute__((noreturn)); -extern VOID prom_restart(VOID) __attribute__((noreturn)); extern VOID ArcReboot(VOID) __attribute__((noreturn)); extern VOID ArcEnterInteractiveMode(VOID) __attribute__((noreturn)); -extern long prom_cfgsave(VOID); -extern struct linux_sysid *prom_getsysid(VOID); extern VOID ArcFlushAllCaches(VOID); extern DISPLAY_STATUS *ArcGetDisplayStatus(ULONG FileID); diff --git a/arch/mips/include/asm/sibyte/bigsur.h b/arch/mips/include/asm/sibyte/bigsur.h index ebefe797fc1..2d1a26d3436 100644 --- a/arch/mips/include/asm/sibyte/bigsur.h +++ b/arch/mips/include/asm/sibyte/bigsur.h @@ -46,4 +46,3 @@ #endif #endif /* __ASM_SIBYTE_BIGSUR_H */ - diff --git a/arch/mips/include/asm/sibyte/sb1250_ldt.h b/arch/mips/include/asm/sibyte/sb1250_ldt.h index 081e8b1c4ad..1e76cf13799 100644 --- a/arch/mips/include/asm/sibyte/sb1250_ldt.h +++ b/arch/mips/include/asm/sibyte/sb1250_ldt.h @@ -420,4 +420,3 @@ #endif /* 1250 PASS2 || 112x PASS1 */ #endif - diff --git a/arch/mips/include/asm/sn/klkernvars.h b/arch/mips/include/asm/sn/klkernvars.h index 5de4c5e8ab3..6af25ba41ad 100644 --- a/arch/mips/include/asm/sn/klkernvars.h +++ b/arch/mips/include/asm/sn/klkernvars.h @@ -26,4 +26,3 @@ typedef struct kern_vars_s { #endif /* !__ASSEMBLY__ */ #endif /* __ASM_SN_KLKERNVARS_H */ - diff --git a/arch/mips/include/asm/sparsemem.h b/arch/mips/include/asm/sparsemem.h index 795ac6c2320..7165333ad04 100644 --- a/arch/mips/include/asm/sparsemem.h +++ b/arch/mips/include/asm/sparsemem.h @@ -11,4 +11,3 @@ #endif /* CONFIG_SPARSEMEM */ #endif /* _MIPS_SPARSEMEM_H */ - diff --git a/arch/mips/include/asm/spinlock.h b/arch/mips/include/asm/spinlock.h index 21ef9efbde4..396e402fbe2 100644 --- a/arch/mips/include/asm/spinlock.h +++ b/arch/mips/include/asm/spinlock.h @@ -36,9 +36,9 @@ static inline int arch_spin_is_locked(arch_spinlock_t *lock) { - unsigned int counters = ACCESS_ONCE(lock->lock); + u32 counters = ACCESS_ONCE(lock->lock); - return ((counters >> 14) ^ counters) & 0x1fff; + return ((counters >> 16) ^ counters) & 0xffff; } #define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock) @@ -47,9 +47,9 @@ static inline int arch_spin_is_locked(arch_spinlock_t *lock) static inline int arch_spin_is_contended(arch_spinlock_t *lock) { - unsigned int counters = ACCESS_ONCE(lock->lock); + u32 counters = ACCESS_ONCE(lock->lock); - return (((counters >> 14) - counters) & 0x1fff) > 1; + return (((counters >> 16) - counters) & 0xffff) > 1; } #define arch_spin_is_contended arch_spin_is_contended @@ -57,6 +57,7 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) { int my_ticket; int tmp; + int inc = 0x10000; if (R10000_LLSC_WAR) { __asm__ __volatile__ ( @@ -64,25 +65,24 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) " .set noreorder \n" " \n" "1: ll %[ticket], %[ticket_ptr] \n" - " addiu %[my_ticket], %[ticket], 0x4000 \n" + " addu %[my_ticket], %[ticket], %[inc] \n" " sc %[my_ticket], %[ticket_ptr] \n" " beqzl %[my_ticket], 1b \n" " nop \n" - " srl %[my_ticket], %[ticket], 14 \n" - " andi %[my_ticket], %[my_ticket], 0x1fff \n" - " andi %[ticket], %[ticket], 0x1fff \n" + " srl %[my_ticket], %[ticket], 16 \n" + " andi %[ticket], %[ticket], 0xffff \n" + " andi %[my_ticket], %[my_ticket], 0xffff \n" " bne %[ticket], %[my_ticket], 4f \n" " subu %[ticket], %[my_ticket], %[ticket] \n" "2: \n" " .subsection 2 \n" - "4: andi %[ticket], %[ticket], 0x1fff \n" + "4: andi %[ticket], %[ticket], 0xffff \n" " sll %[ticket], 5 \n" " \n" "6: bnez %[ticket], 6b \n" " subu %[ticket], 1 \n" " \n" - " lw %[ticket], %[ticket_ptr] \n" - " andi %[ticket], %[ticket], 0x1fff \n" + " lhu %[ticket], %[serving_now_ptr] \n" " beq %[ticket], %[my_ticket], 2b \n" " subu %[ticket], %[my_ticket], %[ticket] \n" " b 4b \n" @@ -90,36 +90,33 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) " .previous \n" " .set pop \n" : [ticket_ptr] "+m" (lock->lock), + [serving_now_ptr] "+m" (lock->h.serving_now), [ticket] "=&r" (tmp), - [my_ticket] "=&r" (my_ticket)); + [my_ticket] "=&r" (my_ticket) + : [inc] "r" (inc)); } else { __asm__ __volatile__ ( " .set push # arch_spin_lock \n" " .set noreorder \n" " \n" - " ll %[ticket], %[ticket_ptr] \n" - "1: addiu %[my_ticket], %[ticket], 0x4000 \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " addu %[my_ticket], %[ticket], %[inc] \n" " sc %[my_ticket], %[ticket_ptr] \n" - " beqz %[my_ticket], 3f \n" - " nop \n" - " srl %[my_ticket], %[ticket], 14 \n" - " andi %[my_ticket], %[my_ticket], 0x1fff \n" - " andi %[ticket], %[ticket], 0x1fff \n" + " beqz %[my_ticket], 1b \n" + " srl %[my_ticket], %[ticket], 16 \n" + " andi %[ticket], %[ticket], 0xffff \n" + " andi %[my_ticket], %[my_ticket], 0xffff \n" " bne %[ticket], %[my_ticket], 4f \n" " subu %[ticket], %[my_ticket], %[ticket] \n" "2: \n" " .subsection 2 \n" - "3: b 1b \n" - " ll %[ticket], %[ticket_ptr] \n" - " \n" "4: andi %[ticket], %[ticket], 0x1fff \n" " sll %[ticket], 5 \n" " \n" "6: bnez %[ticket], 6b \n" " subu %[ticket], 1 \n" " \n" - " lw %[ticket], %[ticket_ptr] \n" - " andi %[ticket], %[ticket], 0x1fff \n" + " lhu %[ticket], %[serving_now_ptr] \n" " beq %[ticket], %[my_ticket], 2b \n" " subu %[ticket], %[my_ticket], %[ticket] \n" " b 4b \n" @@ -127,8 +124,10 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) " .previous \n" " .set pop \n" : [ticket_ptr] "+m" (lock->lock), + [serving_now_ptr] "+m" (lock->h.serving_now), [ticket] "=&r" (tmp), - [my_ticket] "=&r" (my_ticket)); + [my_ticket] "=&r" (my_ticket) + : [inc] "r" (inc)); } smp_llsc_mb(); @@ -136,47 +135,16 @@ static inline void arch_spin_lock(arch_spinlock_t *lock) static inline void arch_spin_unlock(arch_spinlock_t *lock) { - int tmp; - - smp_llsc_mb(); - - if (R10000_LLSC_WAR) { - __asm__ __volatile__ ( - " # arch_spin_unlock \n" - "1: ll %[ticket], %[ticket_ptr] \n" - " addiu %[ticket], %[ticket], 1 \n" - " ori %[ticket], %[ticket], 0x2000 \n" - " xori %[ticket], %[ticket], 0x2000 \n" - " sc %[ticket], %[ticket_ptr] \n" - " beqzl %[ticket], 1b \n" - : [ticket_ptr] "+m" (lock->lock), - [ticket] "=&r" (tmp)); - } else { - __asm__ __volatile__ ( - " .set push # arch_spin_unlock \n" - " .set noreorder \n" - " \n" - " ll %[ticket], %[ticket_ptr] \n" - "1: addiu %[ticket], %[ticket], 1 \n" - " ori %[ticket], %[ticket], 0x2000 \n" - " xori %[ticket], %[ticket], 0x2000 \n" - " sc %[ticket], %[ticket_ptr] \n" - " beqz %[ticket], 2f \n" - " nop \n" - " \n" - " .subsection 2 \n" - "2: b 1b \n" - " ll %[ticket], %[ticket_ptr] \n" - " .previous \n" - " .set pop \n" - : [ticket_ptr] "+m" (lock->lock), - [ticket] "=&r" (tmp)); - } + unsigned int serving_now = lock->h.serving_now + 1; + wmb(); + lock->h.serving_now = (u16)serving_now; + nudge_writes(); } static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) { int tmp, tmp2, tmp3; + int inc = 0x10000; if (R10000_LLSC_WAR) { __asm__ __volatile__ ( @@ -184,11 +152,11 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) " .set noreorder \n" " \n" "1: ll %[ticket], %[ticket_ptr] \n" - " srl %[my_ticket], %[ticket], 14 \n" - " andi %[my_ticket], %[my_ticket], 0x1fff \n" - " andi %[now_serving], %[ticket], 0x1fff \n" + " srl %[my_ticket], %[ticket], 16 \n" + " andi %[my_ticket], %[my_ticket], 0xffff \n" + " andi %[now_serving], %[ticket], 0xffff \n" " bne %[my_ticket], %[now_serving], 3f \n" - " addiu %[ticket], %[ticket], 0x4000 \n" + " addu %[ticket], %[ticket], %[inc] \n" " sc %[ticket], %[ticket_ptr] \n" " beqzl %[ticket], 1b \n" " li %[ticket], 1 \n" @@ -201,33 +169,33 @@ static inline unsigned int arch_spin_trylock(arch_spinlock_t *lock) : [ticket_ptr] "+m" (lock->lock), [ticket] "=&r" (tmp), [my_ticket] "=&r" (tmp2), - [now_serving] "=&r" (tmp3)); + [now_serving] "=&r" (tmp3) + : [inc] "r" (inc)); } else { __asm__ __volatile__ ( " .set push # arch_spin_trylock \n" " .set noreorder \n" " \n" - " ll %[ticket], %[ticket_ptr] \n" - "1: srl %[my_ticket], %[ticket], 14 \n" - " andi %[my_ticket], %[my_ticket], 0x1fff \n" - " andi %[now_serving], %[ticket], 0x1fff \n" + "1: ll %[ticket], %[ticket_ptr] \n" + " srl %[my_ticket], %[ticket], 16 \n" + " andi %[my_ticket], %[my_ticket], 0xffff \n" + " andi %[now_serving], %[ticket], 0xffff \n" " bne %[my_ticket], %[now_serving], 3f \n" - " addiu %[ticket], %[ticket], 0x4000 \n" + " addu %[ticket], %[ticket], %[inc] \n" " sc %[ticket], %[ticket_ptr] \n" - " beqz %[ticket], 4f \n" + " beqz %[ticket], 1b \n" " li %[ticket], 1 \n" "2: \n" " .subsection 2 \n" "3: b 2b \n" " li %[ticket], 0 \n" - "4: b 1b \n" - " ll %[ticket], %[ticket_ptr] \n" " .previous \n" " .set pop \n" : [ticket_ptr] "+m" (lock->lock), [ticket] "=&r" (tmp), [my_ticket] "=&r" (tmp2), - [now_serving] "=&r" (tmp3)); + [now_serving] "=&r" (tmp3) + : [inc] "r" (inc)); } smp_llsc_mb(); @@ -305,7 +273,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) { unsigned int tmp; - smp_llsc_mb(); + smp_mb__before_llsc(); if (R10000_LLSC_WAR) { __asm__ __volatile__( diff --git a/arch/mips/include/asm/spinlock_types.h b/arch/mips/include/asm/spinlock_types.h index ee197c2f9c9..c52f36013a9 100644 --- a/arch/mips/include/asm/spinlock_types.h +++ b/arch/mips/include/asm/spinlock_types.h @@ -5,16 +5,28 @@ # error "please don't include this file directly" #endif -typedef struct { +#include <linux/types.h> + +#include <asm/byteorder.h> + +typedef union { /* - * bits 0..13: serving_now - * bits 14 : junk data - * bits 15..28: ticket + * bits 0..15 : serving_now + * bits 16..31 : ticket */ - unsigned int lock; + u32 lock; + struct { +#ifdef __BIG_ENDIAN + u16 ticket; + u16 serving_now; +#else + u16 serving_now; + u16 ticket; +#endif + } h; } arch_spinlock_t; -#define __ARCH_SPIN_LOCK_UNLOCKED { 0 } +#define __ARCH_SPIN_LOCK_UNLOCKED { .lock = 0 } typedef struct { volatile unsigned int lock; diff --git a/arch/mips/include/asm/system.h b/arch/mips/include/asm/system.h index 83b5509e09e..bb937ccfba1 100644 --- a/arch/mips/include/asm/system.h +++ b/arch/mips/include/asm/system.h @@ -95,6 +95,8 @@ static inline unsigned long __xchg_u32(volatile int * m, unsigned int val) { __u32 retval; + smp_mb__before_llsc(); + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long dummy; @@ -147,6 +149,8 @@ static inline __u64 __xchg_u64(volatile __u64 * m, __u64 val) { __u64 retval; + smp_mb__before_llsc(); + if (kernel_uses_llsc && R10000_LLSC_WAR) { unsigned long dummy; diff --git a/arch/mips/include/asm/txx9/generic.h b/arch/mips/include/asm/txx9/generic.h index 827dc22be2e..64887d3c7ec 100644 --- a/arch/mips/include/asm/txx9/generic.h +++ b/arch/mips/include/asm/txx9/generic.h @@ -42,7 +42,6 @@ struct txx9_board_vec { }; extern struct txx9_board_vec *txx9_board_vec; extern int (*txx9_irq_dispatch)(int pending); -char *prom_getcmdline(void); const char *prom_getenv(const char *name); void txx9_wdt_init(unsigned long base); void txx9_wdt_now(unsigned long base); diff --git a/arch/mips/mm/uasm.h b/arch/mips/include/asm/uasm.h index 3d153edaa51..b99bd07e199 100644 --- a/arch/mips/mm/uasm.h +++ b/arch/mips/include/asm/uasm.h @@ -92,9 +92,11 @@ Ip_u2s3u1(_sd); Ip_u2u1u3(_sll); Ip_u2u1u3(_sra); Ip_u2u1u3(_srl); +Ip_u2u1u3(_rotr); Ip_u3u1u2(_subu); Ip_u2s3u1(_sw); Ip_0(_tlbp); +Ip_0(_tlbr); Ip_0(_tlbwi); Ip_0(_tlbwr); Ip_u3u1u2(_xor); @@ -129,6 +131,7 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \ # define UASM_i_SLL(buf, rs, rt, sh) uasm_i_dsll(buf, rs, rt, sh) # define UASM_i_SRA(buf, rs, rt, sh) uasm_i_dsra(buf, rs, rt, sh) # define UASM_i_SRL(buf, rs, rt, sh) uasm_i_dsrl(buf, rs, rt, sh) +# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_drotr(buf, rs, rt, sh) # define UASM_i_MFC0(buf, rt, rd...) uasm_i_dmfc0(buf, rt, rd) # define UASM_i_MTC0(buf, rt, rd...) uasm_i_dmtc0(buf, rt, rd) # define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_daddiu(buf, rs, rt, val) @@ -142,6 +145,7 @@ static inline void __cpuinit uasm_l##lb(struct uasm_label **lab, u32 *addr) \ # define UASM_i_SLL(buf, rs, rt, sh) uasm_i_sll(buf, rs, rt, sh) # define UASM_i_SRA(buf, rs, rt, sh) uasm_i_sra(buf, rs, rt, sh) # define UASM_i_SRL(buf, rs, rt, sh) uasm_i_srl(buf, rs, rt, sh) +# define UASM_i_ROTR(buf, rs, rt, sh) uasm_i_rotr(buf, rs, rt, sh) # define UASM_i_MFC0(buf, rt, rd...) uasm_i_mfc0(buf, rt, rd) # define UASM_i_MTC0(buf, rt, rd...) uasm_i_mtc0(buf, rt, rd) # define UASM_i_ADDIU(buf, rs, rt, val) uasm_i_addiu(buf, rs, rt, val) diff --git a/arch/mips/include/asm/ucontext.h b/arch/mips/include/asm/ucontext.h index 8a4b20e88b8..9bc07b9f30f 100644 --- a/arch/mips/include/asm/ucontext.h +++ b/arch/mips/include/asm/ucontext.h @@ -1,21 +1 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Low level exception handling - * - * Copyright (C) 1998, 1999 by Ralf Baechle - */ -#ifndef _ASM_UCONTEXT_H -#define _ASM_UCONTEXT_H - -struct ucontext { - unsigned long uc_flags; - struct ucontext *uc_link; - stack_t uc_stack; - struct sigcontext uc_mcontext; - sigset_t uc_sigmask; /* mask last for extensibility */ -}; - -#endif /* _ASM_UCONTEXT_H */ +#include <asm-generic/ucontext.h> diff --git a/arch/mips/jazz/irq.c b/arch/mips/jazz/irq.c index 7bd32d04c2c..ee18028efe9 100644 --- a/arch/mips/jazz/irq.c +++ b/arch/mips/jazz/irq.c @@ -20,17 +20,17 @@ #include <asm/jazz.h> #include <asm/pgtable.h> -static DEFINE_SPINLOCK(r4030_lock); +static DEFINE_RAW_SPINLOCK(r4030_lock); static void enable_r4030_irq(unsigned int irq) { unsigned int mask = 1 << (irq - JAZZ_IRQ_START); unsigned long flags; - spin_lock_irqsave(&r4030_lock, flags); + raw_spin_lock_irqsave(&r4030_lock, flags); mask |= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE); r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask); - spin_unlock_irqrestore(&r4030_lock, flags); + raw_spin_unlock_irqrestore(&r4030_lock, flags); } void disable_r4030_irq(unsigned int irq) @@ -38,10 +38,10 @@ void disable_r4030_irq(unsigned int irq) unsigned int mask = ~(1 << (irq - JAZZ_IRQ_START)); unsigned long flags; - spin_lock_irqsave(&r4030_lock, flags); + raw_spin_lock_irqsave(&r4030_lock, flags); mask &= r4030_read_reg16(JAZZ_IO_IRQ_ENABLE); r4030_write_reg16(JAZZ_IO_IRQ_ENABLE, mask); - spin_unlock_irqrestore(&r4030_lock, flags); + raw_spin_unlock_irqrestore(&r4030_lock, flags); } static struct irq_chip r4030_irq_type = { diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 9326af5186f..ef20957ca14 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -93,6 +93,7 @@ obj-$(CONFIG_GPIO_TXX9) += gpio_txx9.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_SPINLOCK_TEST) += spinlock_test.o CFLAGS_cpu-bugs64.o = $(shell if $(CC) $(KBUILD_CFLAGS) -Wa,-mdaddi -c -o /dev/null -xc /dev/null >/dev/null 2>&1; then echo "-DHAVE_AS_SET_DADDI"; fi) diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 2c1e1d02338..ca6c83218ca 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -188,11 +188,15 @@ void output_mm_defines(void) DEFINE(_PTE_T_SIZE, sizeof(pte_t)); BLANK(); DEFINE(_PGD_T_LOG2, PGD_T_LOG2); +#ifndef __PAGETABLE_PMD_FOLDED DEFINE(_PMD_T_LOG2, PMD_T_LOG2); +#endif DEFINE(_PTE_T_LOG2, PTE_T_LOG2); BLANK(); DEFINE(_PGD_ORDER, PGD_ORDER); +#ifndef __PAGETABLE_PMD_FOLDED DEFINE(_PMD_ORDER, PMD_ORDER); +#endif DEFINE(_PTE_ORDER, PTE_ORDER); BLANK(); DEFINE(_PMD_SHIFT, PMD_SHIFT); diff --git a/arch/mips/kernel/cevt-gt641xx.c b/arch/mips/kernel/cevt-gt641xx.c index f5d265eb6ea..392ef3756c5 100644 --- a/arch/mips/kernel/cevt-gt641xx.c +++ b/arch/mips/kernel/cevt-gt641xx.c @@ -25,7 +25,7 @@ #include <asm/gt64120.h> #include <asm/time.h> -static DEFINE_SPINLOCK(gt641xx_timer_lock); +static DEFINE_RAW_SPINLOCK(gt641xx_timer_lock); static unsigned int gt641xx_base_clock; void gt641xx_set_base_clock(unsigned int clock) @@ -49,7 +49,7 @@ static int gt641xx_timer0_set_next_event(unsigned long delta, { u32 ctrl; - spin_lock(>641xx_timer_lock); + raw_spin_lock(>641xx_timer_lock); ctrl = GT_READ(GT_TC_CONTROL_OFS); ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK); @@ -58,7 +58,7 @@ static int gt641xx_timer0_set_next_event(unsigned long delta, GT_WRITE(GT_TC0_OFS, delta); GT_WRITE(GT_TC_CONTROL_OFS, ctrl); - spin_unlock(>641xx_timer_lock); + raw_spin_unlock(>641xx_timer_lock); return 0; } @@ -68,7 +68,7 @@ static void gt641xx_timer0_set_mode(enum clock_event_mode mode, { u32 ctrl; - spin_lock(>641xx_timer_lock); + raw_spin_lock(>641xx_timer_lock); ctrl = GT_READ(GT_TC_CONTROL_OFS); ctrl &= ~(GT_TC_CONTROL_ENTC0_MSK | GT_TC_CONTROL_SELTC0_MSK); @@ -86,7 +86,7 @@ static void gt641xx_timer0_set_mode(enum clock_event_mode mode, GT_WRITE(GT_TC_CONTROL_OFS, ctrl); - spin_unlock(>641xx_timer_lock); + raw_spin_unlock(>641xx_timer_lock); } static void gt641xx_timer0_event_handler(struct clock_event_device *dev) diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 758ad426c57..be5bb16be4e 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -162,6 +162,7 @@ void __init check_wait(void) case CPU_BCM6348: case CPU_BCM6358: case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: cpu_wait = r4k_wait; break; @@ -700,6 +701,19 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c) return config3 & MIPS_CONF_M; } +static inline unsigned int decode_config4(struct cpuinfo_mips *c) +{ + unsigned int config4; + + config4 = read_c0_config4(); + + if ((config4 & MIPS_CONF4_MMUEXTDEF) == MIPS_CONF4_MMUEXTDEF_MMUSIZEEXT + && cpu_has_tlb) + c->tlbsize += (config4 & MIPS_CONF4_MMUSIZEEXT) * 0x40; + + return config4 & MIPS_CONF_M; +} + static void __cpuinit decode_configs(struct cpuinfo_mips *c) { int ok; @@ -718,6 +732,8 @@ static void __cpuinit decode_configs(struct cpuinfo_mips *c) ok = decode_config2(c); if (ok) ok = decode_config3(c); + if (ok) + ok = decode_config4(c); mips_probe_watch_registers(c); } @@ -731,9 +747,6 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) __cpu_name[cpu] = "MIPS 4Kc"; break; case PRID_IMP_4KEC: - c->cputype = CPU_4KEC; - __cpu_name[cpu] = "MIPS 4KEc"; - break; case PRID_IMP_4KECR2: c->cputype = CPU_4KEC; __cpu_name[cpu] = "MIPS 4KEc"; @@ -899,12 +912,18 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) case PRID_IMP_CAVIUM_CN38XX: case PRID_IMP_CAVIUM_CN31XX: case PRID_IMP_CAVIUM_CN30XX: + c->cputype = CPU_CAVIUM_OCTEON; + __cpu_name[cpu] = "Cavium Octeon"; + goto platform; case PRID_IMP_CAVIUM_CN58XX: case PRID_IMP_CAVIUM_CN56XX: case PRID_IMP_CAVIUM_CN50XX: case PRID_IMP_CAVIUM_CN52XX: - c->cputype = CPU_CAVIUM_OCTEON; - __cpu_name[cpu] = "Cavium Octeon"; + c->cputype = CPU_CAVIUM_OCTEON_PLUS; + __cpu_name[cpu] = "Cavium Octeon+"; +platform: + if (cpu == 0) + __elf_platform = "octeon"; break; default: printk(KERN_INFO "Unknown Octeon chip!\n"); @@ -914,6 +933,7 @@ static inline void cpu_probe_cavium(struct cpuinfo_mips *c, unsigned int cpu) } const char *__cpu_name[NR_CPUS]; +const char *__elf_platform; __cpuinit void cpu_probe(void) { diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c index 68b067040d8..e9e64e0ff7a 100644 --- a/arch/mips/kernel/ftrace.c +++ b/arch/mips/kernel/ftrace.c @@ -3,7 +3,7 @@ * * Copyright (C) 2007-2008 Steven Rostedt <srostedt@redhat.com> * Copyright (C) 2009 DSLab, Lanzhou University, China - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * Thanks goes to Steven Rostedt for writing the original x86 version. */ diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 01c0885a806..27799113332 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -29,7 +29,7 @@ */ static int i8259A_auto_eoi = -1; -DEFINE_SPINLOCK(i8259A_lock); +DEFINE_RAW_SPINLOCK(i8259A_lock); static void disable_8259A_irq(unsigned int irq); static void enable_8259A_irq(unsigned int irq); static void mask_and_ack_8259A(unsigned int irq); @@ -65,13 +65,13 @@ static void disable_8259A_irq(unsigned int irq) irq -= I8259A_IRQ_BASE; mask = 1 << irq; - spin_lock_irqsave(&i8259A_lock, flags); + raw_spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) outb(cached_slave_mask, PIC_SLAVE_IMR); else outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); + raw_spin_unlock_irqrestore(&i8259A_lock, flags); } static void enable_8259A_irq(unsigned int irq) @@ -81,13 +81,13 @@ static void enable_8259A_irq(unsigned int irq) irq -= I8259A_IRQ_BASE; mask = ~(1 << irq); - spin_lock_irqsave(&i8259A_lock, flags); + raw_spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) outb(cached_slave_mask, PIC_SLAVE_IMR); else outb(cached_master_mask, PIC_MASTER_IMR); - spin_unlock_irqrestore(&i8259A_lock, flags); + raw_spin_unlock_irqrestore(&i8259A_lock, flags); } int i8259A_irq_pending(unsigned int irq) @@ -98,12 +98,12 @@ int i8259A_irq_pending(unsigned int irq) irq -= I8259A_IRQ_BASE; mask = 1 << irq; - spin_lock_irqsave(&i8259A_lock, flags); + raw_spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) ret = inb(PIC_MASTER_CMD) & mask; else ret = inb(PIC_SLAVE_CMD) & (mask >> 8); - spin_unlock_irqrestore(&i8259A_lock, flags); + raw_spin_unlock_irqrestore(&i8259A_lock, flags); return ret; } @@ -151,7 +151,7 @@ static void mask_and_ack_8259A(unsigned int irq) irq -= I8259A_IRQ_BASE; irqmask = 1 << irq; - spin_lock_irqsave(&i8259A_lock, flags); + raw_spin_lock_irqsave(&i8259A_lock, flags); /* * Lightweight spurious IRQ detection. We do not want * to overdo spurious IRQ handling - it's usually a sign @@ -183,7 +183,7 @@ handle_real_irq: outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } smtc_im_ack_irq(irq); - spin_unlock_irqrestore(&i8259A_lock, flags); + raw_spin_unlock_irqrestore(&i8259A_lock, flags); return; spurious_8259A_irq: @@ -264,7 +264,7 @@ static void init_8259A(int auto_eoi) i8259A_auto_eoi = auto_eoi; - spin_lock_irqsave(&i8259A_lock, flags); + raw_spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ @@ -298,7 +298,7 @@ static void init_8259A(int auto_eoi) outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ - spin_unlock_irqrestore(&i8259A_lock, flags); + raw_spin_unlock_irqrestore(&i8259A_lock, flags); } /* diff --git a/arch/mips/kernel/irq-gt641xx.c b/arch/mips/kernel/irq-gt641xx.c index ebcc5f7ad9c..42ef81461bf 100644 --- a/arch/mips/kernel/irq-gt641xx.c +++ b/arch/mips/kernel/irq-gt641xx.c @@ -27,18 +27,18 @@ #define GT641XX_IRQ_TO_BIT(irq) (1U << (irq - GT641XX_IRQ_BASE)) -static DEFINE_SPINLOCK(gt641xx_irq_lock); +static DEFINE_RAW_SPINLOCK(gt641xx_irq_lock); static void ack_gt641xx_irq(unsigned int irq) { unsigned long flags; u32 cause; - spin_lock_irqsave(>641xx_irq_lock, flags); + raw_spin_lock_irqsave(>641xx_irq_lock, flags); cause = GT_READ(GT_INTRCAUSE_OFS); cause &= ~GT641XX_IRQ_TO_BIT(irq); GT_WRITE(GT_INTRCAUSE_OFS, cause); - spin_unlock_irqrestore(>641xx_irq_lock, flags); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); } static void mask_gt641xx_irq(unsigned int irq) @@ -46,11 +46,11 @@ static void mask_gt641xx_irq(unsigned int irq) unsigned long flags; u32 mask; - spin_lock_irqsave(>641xx_irq_lock, flags); + raw_spin_lock_irqsave(>641xx_irq_lock, flags); mask = GT_READ(GT_INTRMASK_OFS); mask &= ~GT641XX_IRQ_TO_BIT(irq); GT_WRITE(GT_INTRMASK_OFS, mask); - spin_unlock_irqrestore(>641xx_irq_lock, flags); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); } static void mask_ack_gt641xx_irq(unsigned int irq) @@ -58,7 +58,7 @@ static void mask_ack_gt641xx_irq(unsigned int irq) unsigned long flags; u32 cause, mask; - spin_lock_irqsave(>641xx_irq_lock, flags); + raw_spin_lock_irqsave(>641xx_irq_lock, flags); mask = GT_READ(GT_INTRMASK_OFS); mask &= ~GT641XX_IRQ_TO_BIT(irq); GT_WRITE(GT_INTRMASK_OFS, mask); @@ -66,7 +66,7 @@ static void mask_ack_gt641xx_irq(unsigned int irq) cause = GT_READ(GT_INTRCAUSE_OFS); cause &= ~GT641XX_IRQ_TO_BIT(irq); GT_WRITE(GT_INTRCAUSE_OFS, cause); - spin_unlock_irqrestore(>641xx_irq_lock, flags); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); } static void unmask_gt641xx_irq(unsigned int irq) @@ -74,11 +74,11 @@ static void unmask_gt641xx_irq(unsigned int irq) unsigned long flags; u32 mask; - spin_lock_irqsave(>641xx_irq_lock, flags); + raw_spin_lock_irqsave(>641xx_irq_lock, flags); mask = GT_READ(GT_INTRMASK_OFS); mask |= GT641XX_IRQ_TO_BIT(irq); GT_WRITE(GT_INTRMASK_OFS, mask); - spin_unlock_irqrestore(>641xx_irq_lock, flags); + raw_spin_unlock_irqrestore(>641xx_irq_lock, flags); } static struct irq_chip gt641xx_irq_chip = { diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index f042563c924..bde79ef602e 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -9,7 +9,6 @@ #include <linux/mm.h> #include <linux/errno.h> #include <linux/file.h> -#include <linux/smp_lock.h> #include <linux/highuid.h> #include <linux/resource.h> #include <linux/highmem.h> diff --git a/arch/mips/kernel/mcount.S b/arch/mips/kernel/mcount.S index 0a9cfdb271d..6851fc97a51 100644 --- a/arch/mips/kernel/mcount.S +++ b/arch/mips/kernel/mcount.S @@ -6,7 +6,7 @@ * more details. * * Copyright (C) 2009 Lemote Inc. & DSLab, Lanzhou University, China - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> */ #include <asm/regdef.h> diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index 3952b8323ef..dd18b26a358 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -500,4 +500,3 @@ done_restore: nop END(octeon_mult_restore) .set pop - diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index 364f066cb49..dcaed1bbbfe 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -28,7 +28,6 @@ #include <linux/vmalloc.h> #include <linux/elf.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/moduleloader.h> #include <linux/interrupt.h> diff --git a/arch/mips/kernel/spinlock_test.c b/arch/mips/kernel/spinlock_test.c new file mode 100644 index 00000000000..da61134dfc5 --- /dev/null +++ b/arch/mips/kernel/spinlock_test.c @@ -0,0 +1,141 @@ +#include <linux/init.h> +#include <linux/kthread.h> +#include <linux/hrtimer.h> +#include <linux/fs.h> +#include <linux/debugfs.h> +#include <linux/module.h> +#include <linux/spinlock.h> + + +static int ss_get(void *data, u64 *val) +{ + ktime_t start, finish; + int loops; + int cont; + DEFINE_RAW_SPINLOCK(ss_spin); + + loops = 1000000; + cont = 1; + + start = ktime_get(); + + while (cont) { + raw_spin_lock(&ss_spin); + loops--; + if (loops == 0) + cont = 0; + raw_spin_unlock(&ss_spin); + } + + finish = ktime_get(); + + *val = ktime_us_delta(finish, start); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_ss, ss_get, NULL, "%llu\n"); + + + +struct spin_multi_state { + raw_spinlock_t lock; + atomic_t start_wait; + atomic_t enter_wait; + atomic_t exit_wait; + int loops; +}; + +struct spin_multi_per_thread { + struct spin_multi_state *state; + ktime_t start; +}; + +static int multi_other(void *data) +{ + int loops; + int cont; + struct spin_multi_per_thread *pt = data; + struct spin_multi_state *s = pt->state; + + loops = s->loops; + cont = 1; + + atomic_dec(&s->enter_wait); + + while (atomic_read(&s->enter_wait)) + ; /* spin */ + + pt->start = ktime_get(); + + atomic_dec(&s->start_wait); + + while (atomic_read(&s->start_wait)) + ; /* spin */ + + while (cont) { + raw_spin_lock(&s->lock); + loops--; + if (loops == 0) + cont = 0; + raw_spin_unlock(&s->lock); + } + + atomic_dec(&s->exit_wait); + while (atomic_read(&s->exit_wait)) + ; /* spin */ + return 0; +} + +static int multi_get(void *data, u64 *val) +{ + ktime_t finish; + struct spin_multi_state ms; + struct spin_multi_per_thread t1, t2; + + ms.lock = __RAW_SPIN_LOCK_UNLOCKED("multi_get"); + ms.loops = 1000000; + + atomic_set(&ms.start_wait, 2); + atomic_set(&ms.enter_wait, 2); + atomic_set(&ms.exit_wait, 2); + t1.state = &ms; + t2.state = &ms; + + kthread_run(multi_other, &t2, "multi_get"); + + multi_other(&t1); + + finish = ktime_get(); + + *val = ktime_us_delta(finish, t1.start); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(fops_multi, multi_get, NULL, "%llu\n"); + + +extern struct dentry *mips_debugfs_dir; +static int __init spinlock_test(void) +{ + struct dentry *d; + + if (!mips_debugfs_dir) + return -ENODEV; + + d = debugfs_create_file("spin_single", S_IRUGO, + mips_debugfs_dir, NULL, + &fops_ss); + if (!d) + return -ENOMEM; + + d = debugfs_create_file("spin_multi", S_IRUGO, + mips_debugfs_dir, NULL, + &fops_multi); + if (!d) + return -ENOMEM; + + return 0; +} +device_initcall(spinlock_test); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 31b204b26ba..4e00f9bc23e 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -50,6 +50,7 @@ #include <asm/types.h> #include <asm/stacktrace.h> #include <asm/irq.h> +#include <asm/uasm.h> extern void check_wait(void); extern asmlinkage void r4k_wait(void); @@ -1271,21 +1272,25 @@ unsigned long ebase; unsigned long exception_handlers[32]; unsigned long vi_handlers[64]; -/* - * As a side effect of the way this is implemented we're limited - * to interrupt handlers in the address range from - * KSEG0 <= x < KSEG0 + 256mb on the Nevada. Oh well ... - */ -void *set_except_vector(int n, void *addr) +void __init *set_except_vector(int n, void *addr) { unsigned long handler = (unsigned long) addr; unsigned long old_handler = exception_handlers[n]; exception_handlers[n] = handler; if (n == 0 && cpu_has_divec) { - *(u32 *)(ebase + 0x200) = 0x08000000 | - (0x03ffffff & (handler >> 2)); - local_flush_icache_range(ebase + 0x200, ebase + 0x204); + unsigned long jump_mask = ~((1 << 28) - 1); + u32 *buf = (u32 *)(ebase + 0x200); + unsigned int k0 = 26; + if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) { + uasm_i_j(&buf, handler & ~jump_mask); + uasm_i_nop(&buf); + } else { + UASM_i_LA(&buf, k0, handler); + uasm_i_jr(&buf, k0); + uasm_i_nop(&buf); + } + local_flush_icache_range(ebase + 0x200, (unsigned long)buf); } return (void *)old_handler; } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c index 60477529362..2bd2151c586 100644 --- a/arch/mips/kernel/vpe.c +++ b/arch/mips/kernel/vpe.c @@ -38,7 +38,6 @@ #include <linux/vmalloc.h> #include <linux/elf.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <linux/syscalls.h> #include <linux/moduleloader.h> #include <linux/interrupt.h> diff --git a/arch/mips/lasat/picvue.h b/arch/mips/lasat/picvue.h index 91df5537112..2f0757738fd 100644 --- a/arch/mips/lasat/picvue.h +++ b/arch/mips/lasat/picvue.h @@ -42,4 +42,3 @@ void pvc_move(u8 cmd); void pvc_clear(void); void pvc_home(void); - diff --git a/arch/mips/loongson/common/cmdline.c b/arch/mips/loongson/common/cmdline.c index 7ad47f22747..1a06defc4f7 100644 --- a/arch/mips/loongson/common/cmdline.c +++ b/arch/mips/loongson/common/cmdline.c @@ -10,7 +10,7 @@ * Author: Fuxin Zhang, zhangfx@lemote.com * * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -21,12 +21,11 @@ #include <loongson.h> -int prom_argc; -/* pmon passes arguments in 32bit pointers */ -int *_prom_argv; - void __init prom_init_cmdline(void) { + int prom_argc; + /* pmon passes arguments in 32bit pointers */ + int *_prom_argv; int i; long l; diff --git a/arch/mips/loongson/common/cs5536/cs5536_acc.c b/arch/mips/loongson/common/cs5536/cs5536_acc.c index b49485f187e..b3fd5eab654 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_acc.c +++ b/arch/mips/loongson/common/cs5536/cs5536_acc.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/cs5536/cs5536_ehci.c b/arch/mips/loongson/common/cs5536/cs5536_ehci.c index 74f9c59d36a..eaf8b86e331 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ehci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ehci.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/cs5536/cs5536_ide.c b/arch/mips/loongson/common/cs5536/cs5536_ide.c index 3f61594b388..9a96b5664c7 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ide.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ide.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/cs5536/cs5536_isa.c b/arch/mips/loongson/common/cs5536/cs5536_isa.c index b6f17f538e4..f5c0818831b 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_isa.c +++ b/arch/mips/loongson/common/cs5536/cs5536_isa.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c index 6cb44dbaeec..8c807c96519 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c +++ b/arch/mips/loongson/common/cs5536/cs5536_mfgpt.c @@ -5,7 +5,7 @@ * Author: Yanhua, yanh@lemote.com * * Copyright (C) 2009 Lemote Inc. - * Author: Wu zhangjin, wuzj@lemote.com + * Author: Wu zhangjin, wuzhangjin@gmail.com * * Reference: AMD Geode(TM) CS5536 Companion Device Data Book * diff --git a/arch/mips/loongson/common/cs5536/cs5536_ohci.c b/arch/mips/loongson/common/cs5536/cs5536_ohci.c index 8fdb02b6e90..db5900aadd6 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_ohci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_ohci.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/cs5536/cs5536_pci.c b/arch/mips/loongson/common/cs5536/cs5536_pci.c index e23f3d7d2c1..6dfeab11af0 100644 --- a/arch/mips/loongson/common/cs5536/cs5536_pci.c +++ b/arch/mips/loongson/common/cs5536/cs5536_pci.c @@ -5,7 +5,7 @@ * Author : jlliu, liujl@lemote.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/early_printk.c b/arch/mips/loongson/common/early_printk.c index 23e7a8f8897..a71736f0044 100644 --- a/arch/mips/loongson/common/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -2,7 +2,7 @@ * * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> * Copyright (c) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c index 196d947d929..ae4cff97a56 100644 --- a/arch/mips/loongson/common/env.c +++ b/arch/mips/loongson/common/env.c @@ -9,8 +9,8 @@ * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology - * Author: Wu Zhangjin, wuzj@lemote.com + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -23,13 +23,10 @@ #include <loongson.h> -unsigned long bus_clock, cpu_clock_freq; +unsigned long cpu_clock_freq; EXPORT_SYMBOL(cpu_clock_freq); unsigned long memsize, highmemsize; -/* pmon passes arguments in 32bit pointers */ -int *_prom_envp; - #define parse_even_earlier(res, option, p) \ do { \ if (strncmp(option, (char *)p, strlen(option)) == 0) \ @@ -39,6 +36,10 @@ do { \ void __init prom_init_env(void) { + /* pmon passes arguments in 32bit pointers */ + int *_prom_envp; + unsigned long bus_clock; + unsigned int processor_id; long l; /* firmware arguments are initialized in head.S */ @@ -55,6 +56,22 @@ void __init prom_init_env(void) } if (memsize == 0) memsize = 256; + if (bus_clock == 0) + bus_clock = 66000000; + if (cpu_clock_freq == 0) { + processor_id = (¤t_cpu_data)->processor_id; + switch (processor_id & PRID_REV_MASK) { + case PRID_REV_LOONGSON2E: + cpu_clock_freq = 533080000; + break; + case PRID_REV_LOONGSON2F: + cpu_clock_freq = 797000000; + break; + default: + cpu_clock_freq = 100000000; + break; + } + } pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n", bus_clock, cpu_clock_freq, memsize, highmemsize); diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c index a2abd935573..19d34159125 100644 --- a/arch/mips/loongson/common/init.c +++ b/arch/mips/loongson/common/init.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c index 0ed52b3f531..853f184b793 100644 --- a/arch/mips/loongson/common/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -1,6 +1,6 @@ /* - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology - * Author: Wu Zhangjin, wuzj@lemote.com + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * Copyright (c) 2009 Zhang Le <r0bertz@gentoo.org> * @@ -35,6 +35,10 @@ const char *get_system_type(void) return system_types[mips_machtype]; } +void __weak __init mach_prom_init_machtype(void) +{ +} + void __init prom_init_machtype(void) { char *p, str[MACHTYPE_LEN]; @@ -43,8 +47,10 @@ void __init prom_init_machtype(void) mips_machtype = LOONGSON_MACHTYPE; p = strstr(arcs_cmdline, "machtype="); - if (!p) + if (!p) { + mach_prom_init_machtype(); return; + } p += strlen("machtype="); strncpy(str, p, MACHTYPE_LEN); p = strstr(str, " "); diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c index ceacd092b44..ec2f7964a0b 100644 --- a/arch/mips/loongson/common/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -16,10 +16,11 @@ void __init prom_init_memory(void) { - add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); + + add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << + 20), BOOT_MEM_RESERVED); - add_memory_region(memsize << 20, LOONGSON_PCI_MEM_START - (memsize << - 20), BOOT_MEM_RESERVED); #ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG { int bit; diff --git a/arch/mips/loongson/common/platform.c b/arch/mips/loongson/common/platform.c index be81777eb94..ed007a2e0e1 100644 --- a/arch/mips/loongson/common/platform.c +++ b/arch/mips/loongson/common/platform.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/pm.c b/arch/mips/loongson/common/pm.c index b625fec8a4d..6c1fd900171 100644 --- a/arch/mips/loongson/common/pm.c +++ b/arch/mips/loongson/common/pm.c @@ -2,7 +2,7 @@ * loongson-specific suspend support * * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c index d57f1719da9..4bd9c18b07a 100644 --- a/arch/mips/loongson/common/reset.c +++ b/arch/mips/loongson/common/reset.c @@ -6,8 +6,8 @@ * * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology - * Author: Zhangjin Wu, wuzj@lemote.com + * Copyright (C) 2009 Lemote, Inc. + * Author: Zhangjin Wu, wuzhangjin@gmail.com */ #include <linux/init.h> #include <linux/pm.h> @@ -25,18 +25,26 @@ static void loongson_restart(char *command) ((void (*)(void))ioremap_nocache(LOONGSON_BOOT_BASE, 4)) (); } -static void loongson_halt(void) +static void loongson_poweroff(void) { mach_prepare_shutdown(); - while (1) - ; + unreachable(); +} + +static void loongson_halt(void) +{ + pr_notice("\n\n** You can safely turn off the power now **\n\n"); + while (1) { + if (cpu_wait) + cpu_wait(); + } } static int __init mips_reboot_setup(void) { _machine_restart = loongson_restart; _machine_halt = loongson_halt; - pm_power_off = loongson_halt; + pm_power_off = loongson_poweroff; return 0; } diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c index 23b66a5f88c..7580873143c 100644 --- a/arch/mips/loongson/common/serial.c +++ b/arch/mips/loongson/common/serial.c @@ -7,7 +7,7 @@ * * Copyright (C) 2009 Lemote, Inc. * Author: Yan hua (yanhua@lemote.com) - * Author: Wu Zhangjin (wuzj@lemote.com) + * Author: Wu Zhangjin (wuzhangjin@gmail.com) */ #include <linux/io.h> diff --git a/arch/mips/loongson/common/time.c b/arch/mips/loongson/common/time.c index 35f0b66a94f..9fdd01f6c56 100644 --- a/arch/mips/loongson/common/time.c +++ b/arch/mips/loongson/common/time.c @@ -2,8 +2,8 @@ * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology * Author: Fuxin Zhang, zhangfx@lemote.com * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology - * Author: Wu Zhangjin, wuzj@lemote.com + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c index 78ff66ae749..d69ea54bc3d 100644 --- a/arch/mips/loongson/common/uart_base.c +++ b/arch/mips/loongson/common/uart_base.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c index fc16c677d47..bc39ec62c8c 100644 --- a/arch/mips/loongson/fuloong-2e/reset.c +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -1,8 +1,8 @@ /* Board-specific reboot/shutdown routines * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology - * Author: Wu Zhangjin, wuzj@lemote.com + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/loongson/lemote-2f/Makefile b/arch/mips/loongson/lemote-2f/Makefile index 4d84b27dc41..8699a53f047 100644 --- a/arch/mips/loongson/lemote-2f/Makefile +++ b/arch/mips/loongson/lemote-2f/Makefile @@ -2,7 +2,7 @@ # Makefile for lemote loongson2f family machines # -obj-y += irq.o reset.o ec_kb3310b.o +obj-y += machtype.o irq.o reset.o ec_kb3310b.o # # Suspend Support diff --git a/arch/mips/loongson/lemote-2f/ec_kb3310b.c b/arch/mips/loongson/lemote-2f/ec_kb3310b.c index 4d84111a2cd..64057244eec 100644 --- a/arch/mips/loongson/lemote-2f/ec_kb3310b.c +++ b/arch/mips/loongson/lemote-2f/ec_kb3310b.c @@ -75,6 +75,8 @@ int ec_query_seq(unsigned char cmd) udelay(EC_REG_DELAY); } + spin_unlock_irqrestore(&port_access_lock, flags); + if (timeout <= 0) { printk(KERN_ERR "%s: deadable error : timeout...\n", __func__); ret = -EINVAL; @@ -83,8 +85,6 @@ int ec_query_seq(unsigned char cmd) "(%x/%d)ec issued command %d status : 0x%x\n", timeout, EC_CMD_TIMEOUT - timeout, cmd, status); - spin_unlock_irqrestore(&port_access_lock, flags); - return ret; } EXPORT_SYMBOL_GPL(ec_query_seq); diff --git a/arch/mips/loongson/lemote-2f/irq.c b/arch/mips/loongson/lemote-2f/irq.c index 77d32f9cf31..882dfcd42c0 100644 --- a/arch/mips/loongson/lemote-2f/irq.c +++ b/arch/mips/loongson/lemote-2f/irq.c @@ -38,7 +38,7 @@ int mach_i8259_irq(void) irq = -1; if ((LOONGSON_INTISR & LOONGSON_INTEN) & LOONGSON_INT_BIT_INT0) { - spin_lock(&i8259A_lock); + raw_spin_lock(&i8259A_lock); isr = inb(PIC_MASTER_CMD) & ~inb(PIC_MASTER_IMR) & ~(1 << PIC_CASCADE_IR); if (!isr) @@ -56,7 +56,7 @@ int mach_i8259_irq(void) if (~inb(PIC_MASTER_ISR) & 0x80) irq = -1; } - spin_unlock(&i8259A_lock); + raw_spin_unlock(&i8259A_lock); } return irq; diff --git a/arch/mips/loongson/lemote-2f/machtype.c b/arch/mips/loongson/lemote-2f/machtype.c new file mode 100644 index 00000000000..e860a2705c2 --- /dev/null +++ b/arch/mips/loongson/lemote-2f/machtype.c @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2009 Lemote Inc. + * Author: Wu Zhangjin, wuzhangjin@gmail.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <asm/bootinfo.h> + +#include <loongson.h> + +void __init mach_prom_init_machtype(void) +{ + /* We share the same kernel image file among Lemote 2F family + * of machines, and provide the machtype= kernel command line + * to users to indicate their machine, this command line will + * be passed by the latest PMON automatically. and fortunately, + * up to now, we can get the machine type from the PMON_VER= + * commandline directly except the NAS machine, In the old + * machines, this will help the users a lot. + * + * If no "machtype=" passed, get machine type from "PMON_VER=". + * PMON_VER=LM8089 Lemote 8.9'' netbook + * LM8101 Lemote 10.1'' netbook + * (The above two netbooks have the same kernel support) + * LM6XXX Lemote FuLoong(2F) box series + * LM9XXX Lemote LynLoong PC series + */ + if (strstr(arcs_cmdline, "PMON_VER=LM")) { + if (strstr(arcs_cmdline, "PMON_VER=LM8")) + mips_machtype = MACH_LEMOTE_YL2F89; + else if (strstr(arcs_cmdline, "PMON_VER=LM6")) + mips_machtype = MACH_LEMOTE_FL2F; + else if (strstr(arcs_cmdline, "PMON_VER=LM9")) + mips_machtype = MACH_LEMOTE_LL2F; + else + mips_machtype = MACH_LEMOTE_NAS; + + strcat(arcs_cmdline, " machtype="); + strcat(arcs_cmdline, get_system_type()); + strcat(arcs_cmdline, " "); + } +} diff --git a/arch/mips/loongson/lemote-2f/pm.c b/arch/mips/loongson/lemote-2f/pm.c index d7af2e61659..cac4d382ea7 100644 --- a/arch/mips/loongson/lemote-2f/pm.c +++ b/arch/mips/loongson/lemote-2f/pm.c @@ -2,7 +2,7 @@ * Lemote loongson2f family machines' specific suspend support * * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/arch/mips/loongson/lemote-2f/reset.c b/arch/mips/loongson/lemote-2f/reset.c index 51d1a60d534..36020a07e18 100644 --- a/arch/mips/loongson/lemote-2f/reset.c +++ b/arch/mips/loongson/lemote-2f/reset.c @@ -3,7 +3,7 @@ * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> * * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the diff --git a/arch/mips/math-emu/ieee754d.c b/arch/mips/math-emu/ieee754d.c index 7e900f30987..a0325337b76 100644 --- a/arch/mips/math-emu/ieee754d.c +++ b/arch/mips/math-emu/ieee754d.c @@ -135,4 +135,3 @@ ieee754sp ieee754sp_dump(char *m, ieee754sp x) printk("\n"); return x; } - diff --git a/arch/mips/math-emu/ieee754dp.c b/arch/mips/math-emu/ieee754dp.c index 6d2d89f3247..2f22fd7fd78 100644 --- a/arch/mips/math-emu/ieee754dp.c +++ b/arch/mips/math-emu/ieee754dp.c @@ -148,7 +148,6 @@ ieee754dp ieee754dp_format(int sn, int xe, u64 xm) switch(ieee754_csr.rm) { case IEEE754_RN: - return ieee754dp_zero(sn); case IEEE754_RZ: return ieee754dp_zero(sn); case IEEE754_RU: /* toward +Infinity */ diff --git a/arch/mips/math-emu/ieee754sp.c b/arch/mips/math-emu/ieee754sp.c index 463534045ab..a19b72185ab 100644 --- a/arch/mips/math-emu/ieee754sp.c +++ b/arch/mips/math-emu/ieee754sp.c @@ -149,7 +149,6 @@ ieee754sp ieee754sp_format(int sn, int xe, unsigned xm) switch(ieee754_csr.rm) { case IEEE754_RN: - return ieee754sp_zero(sn); case IEEE754_RZ: return ieee754sp_zero(sn); case IEEE754_RU: /* toward +Infinity */ diff --git a/arch/mips/math-emu/ieee754xcpt.c b/arch/mips/math-emu/ieee754xcpt.c index 7d8ef896506..e02423a0ae2 100644 --- a/arch/mips/math-emu/ieee754xcpt.c +++ b/arch/mips/math-emu/ieee754xcpt.c @@ -46,4 +46,3 @@ void ieee754_xcpt(struct ieee754xctx *xcp) printk(KERN_DEBUG "floating point exception in \"%s\", type=%s\n", xcp->op, rtnames[xcp->rt]); } - diff --git a/arch/mips/mm/c-octeon.c b/arch/mips/mm/c-octeon.c index e06f1af760a..0f9c488044d 100644 --- a/arch/mips/mm/c-octeon.c +++ b/arch/mips/mm/c-octeon.c @@ -183,6 +183,7 @@ static void __cpuinit probe_octeon(void) switch (c->cputype) { case CPU_CAVIUM_OCTEON: + case CPU_CAVIUM_OCTEON_PLUS: config1 = read_c0_config1(); c->icache.linesz = 2 << ((config1 >> 19) & 7); c->icache.sets = 64 << ((config1 >> 22) & 7); @@ -192,10 +193,10 @@ static void __cpuinit probe_octeon(void) c->icache.sets * c->icache.ways * c->icache.linesz; c->icache.waybit = ffs(icache_size / c->icache.ways) - 1; c->dcache.linesz = 128; - if (OCTEON_IS_MODEL(OCTEON_CN3XXX)) - c->dcache.sets = 1; /* CN3XXX has one Dcache set */ - else + if (c->cputype == CPU_CAVIUM_OCTEON_PLUS) c->dcache.sets = 2; /* CN5XXX has two Dcache sets */ + else + c->dcache.sets = 1; /* CN3XXX has one Dcache set */ c->dcache.ways = 64; dcache_size = c->dcache.sets * c->dcache.ways * c->dcache.linesz; @@ -305,4 +306,3 @@ asmlinkage void cache_parity_error_octeon_non_recoverable(void) { cache_parity_error_octeon(1); } - diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index e716cafc346..be8627bc5b0 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -137,22 +137,43 @@ EXPORT_SYMBOL_GPL(_page_cachable_default); static inline void setup_protection_map(void) { - protection_map[0] = PAGE_NONE; - protection_map[1] = PAGE_READONLY; - protection_map[2] = PAGE_COPY; - protection_map[3] = PAGE_COPY; - protection_map[4] = PAGE_READONLY; - protection_map[5] = PAGE_READONLY; - protection_map[6] = PAGE_COPY; - protection_map[7] = PAGE_COPY; - protection_map[8] = PAGE_NONE; - protection_map[9] = PAGE_READONLY; - protection_map[10] = PAGE_SHARED; - protection_map[11] = PAGE_SHARED; - protection_map[12] = PAGE_READONLY; - protection_map[13] = PAGE_READONLY; - protection_map[14] = PAGE_SHARED; - protection_map[15] = PAGE_SHARED; + if (kernel_uses_smartmips_rixi) { + protection_map[0] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ); + protection_map[1] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC); + protection_map[2] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ); + protection_map[3] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC); + protection_map[4] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ); + protection_map[5] = __pgprot(_page_cachable_default | _PAGE_PRESENT); + protection_map[6] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ); + protection_map[7] = __pgprot(_page_cachable_default | _PAGE_PRESENT); + + protection_map[8] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_NO_READ); + protection_map[9] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC); + protection_map[10] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE | _PAGE_NO_READ); + protection_map[11] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_EXEC | _PAGE_WRITE); + protection_map[12] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_NO_READ); + protection_map[13] = __pgprot(_page_cachable_default | _PAGE_PRESENT); + protection_map[14] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE | _PAGE_NO_READ); + protection_map[15] = __pgprot(_page_cachable_default | _PAGE_PRESENT | _PAGE_WRITE); + + } else { + protection_map[0] = PAGE_NONE; + protection_map[1] = PAGE_READONLY; + protection_map[2] = PAGE_COPY; + protection_map[3] = PAGE_COPY; + protection_map[4] = PAGE_READONLY; + protection_map[5] = PAGE_READONLY; + protection_map[6] = PAGE_COPY; + protection_map[7] = PAGE_COPY; + protection_map[8] = PAGE_NONE; + protection_map[9] = PAGE_READONLY; + protection_map[10] = PAGE_SHARED; + protection_map[11] = PAGE_SHARED; + protection_map[12] = PAGE_READONLY; + protection_map[13] = PAGE_READONLY; + protection_map[14] = PAGE_SHARED; + protection_map[15] = PAGE_SHARED; + } } void __cpuinit cpu_cache_init(void) diff --git a/arch/mips/mm/fault.c b/arch/mips/mm/fault.c index e97a7a2fb2c..b78f7d913ca 100644 --- a/arch/mips/mm/fault.c +++ b/arch/mips/mm/fault.c @@ -99,8 +99,31 @@ good_area: if (!(vma->vm_flags & VM_WRITE)) goto bad_area; } else { - if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) - goto bad_area; + if (kernel_uses_smartmips_rixi) { + if (address == regs->cp0_epc && !(vma->vm_flags & VM_EXEC)) { +#if 0 + pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] XI violation\n", + raw_smp_processor_id(), + current->comm, current->pid, + field, address, write, + field, regs->cp0_epc); +#endif + goto bad_area; + } + if (!(vma->vm_flags & VM_READ)) { +#if 0 + pr_notice("Cpu%d[%s:%d:%0*lx:%ld:%0*lx] RI violation\n", + raw_smp_processor_id(), + current->comm, current->pid, + field, address, write, + field, regs->cp0_epc); +#endif + goto bad_area; + } + } else { + if (!(vma->vm_flags & (VM_READ | VM_WRITE | VM_EXEC))) + goto bad_area; + } } /* diff --git a/arch/mips/mm/hugetlbpage.c b/arch/mips/mm/hugetlbpage.c index 8c2834f5919..cd0660c51f2 100644 --- a/arch/mips/mm/hugetlbpage.c +++ b/arch/mips/mm/hugetlbpage.c @@ -97,4 +97,3 @@ follow_huge_pmd(struct mm_struct *mm, unsigned long address, page += ((address & ~HPAGE_MASK) >> PAGE_SHIFT); return page; } - diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 1651942f7fe..f34c26439a3 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -143,7 +143,7 @@ void *kmap_coherent(struct page *page, unsigned long addr) #if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32) entrylo = pte.pte_high; #else - entrylo = pte_val(pte) >> 6; + entrylo = pte_to_entrylo(pte_val(pte)); #endif ENTER_CRITICAL(flags); @@ -477,7 +477,7 @@ unsigned long pgd_current[NR_CPUS]; * will officially be retired. */ pgd_t swapper_pg_dir[_PTRS_PER_PGD] __page_aligned(_PGD_ORDER); -#ifdef CONFIG_64BIT +#ifndef __PAGETABLE_PMD_FOLDED pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER); #endif pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER); diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index f5c73754d66..36272f7d374 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -35,7 +35,7 @@ #include <asm/sibyte/sb1250_dma.h> #endif -#include "uasm.h" +#include <asm/uasm.h> /* Registers used in the assembled routines. */ #define ZERO 0 diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c index 1121019fa45..78eaa4f0b0e 100644 --- a/arch/mips/mm/pgtable-64.c +++ b/arch/mips/mm/pgtable-64.c @@ -15,23 +15,31 @@ void pgd_init(unsigned long page) { unsigned long *p, *end; + unsigned long entry; + +#ifdef __PAGETABLE_PMD_FOLDED + entry = (unsigned long)invalid_pte_table; +#else + entry = (unsigned long)invalid_pmd_table; +#endif p = (unsigned long *) page; end = p + PTRS_PER_PGD; while (p < end) { - p[0] = (unsigned long) invalid_pmd_table; - p[1] = (unsigned long) invalid_pmd_table; - p[2] = (unsigned long) invalid_pmd_table; - p[3] = (unsigned long) invalid_pmd_table; - p[4] = (unsigned long) invalid_pmd_table; - p[5] = (unsigned long) invalid_pmd_table; - p[6] = (unsigned long) invalid_pmd_table; - p[7] = (unsigned long) invalid_pmd_table; + p[0] = entry; + p[1] = entry; + p[2] = entry; + p[3] = entry; + p[4] = entry; + p[5] = entry; + p[6] = entry; + p[7] = entry; p += 8; } } +#ifndef __PAGETABLE_PMD_FOLDED void pmd_init(unsigned long addr, unsigned long pagetable) { unsigned long *p, *end; @@ -40,17 +48,18 @@ void pmd_init(unsigned long addr, unsigned long pagetable) end = p + PTRS_PER_PMD; while (p < end) { - p[0] = (unsigned long)pagetable; - p[1] = (unsigned long)pagetable; - p[2] = (unsigned long)pagetable; - p[3] = (unsigned long)pagetable; - p[4] = (unsigned long)pagetable; - p[5] = (unsigned long)pagetable; - p[6] = (unsigned long)pagetable; - p[7] = (unsigned long)pagetable; + p[0] = pagetable; + p[1] = pagetable; + p[2] = pagetable; + p[3] = pagetable; + p[4] = pagetable; + p[5] = pagetable; + p[6] = pagetable; + p[7] = pagetable; p += 8; } } +#endif void __init pagetable_init(void) { @@ -59,8 +68,9 @@ void __init pagetable_init(void) /* Initialize the entire pgd. */ pgd_init((unsigned long)swapper_pg_dir); +#ifndef __PAGETABLE_PMD_FOLDED pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table); - +#endif pgd_base = swapper_pg_dir; /* * Fixed mappings: diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index d73428b18b0..c618eed933a 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -303,7 +303,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) unsigned long lo; write_c0_pagemask(PM_HUGE_MASK); ptep = (pte_t *)pmdp; - lo = pte_val(*ptep) >> 6; + lo = pte_to_entrylo(pte_val(*ptep)); write_c0_entrylo0(lo); write_c0_entrylo1(lo + (HPAGE_SIZE >> 7)); @@ -323,8 +323,8 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) ptep++; write_c0_entrylo1(ptep->pte_high); #else - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); + write_c0_entrylo0(pte_to_entrylo(pte_val(*ptep++))); + write_c0_entrylo1(pte_to_entrylo(pte_val(*ptep))); #endif mtc0_tlbw_hazard(); if (idx < 0) @@ -337,40 +337,6 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte) EXIT_CRITICAL(flags); } -#if 0 -static void r4k_update_mmu_cache_hwbug(struct vm_area_struct * vma, - unsigned long address, pte_t pte) -{ - unsigned long flags; - unsigned int asid; - pgd_t *pgdp; - pmd_t *pmdp; - pte_t *ptep; - int idx; - - ENTER_CRITICAL(flags); - address &= (PAGE_MASK << 1); - asid = read_c0_entryhi() & ASID_MASK; - write_c0_entryhi(address | asid); - pgdp = pgd_offset(vma->vm_mm, address); - mtc0_tlbw_hazard(); - tlb_probe(); - tlb_probe_hazard(); - pmdp = pmd_offset(pgdp, address); - idx = read_c0_index(); - ptep = pte_offset_map(pmdp, address); - write_c0_entrylo0(pte_val(*ptep++) >> 6); - write_c0_entrylo1(pte_val(*ptep) >> 6); - mtc0_tlbw_hazard(); - if (idx < 0) - tlb_write_random(); - else - tlb_write_indexed(); - tlbw_use_hazard(); - EXIT_CRITICAL(flags); -} -#endif - void __init add_wired_entry(unsigned long entrylo0, unsigned long entrylo1, unsigned long entryhi, unsigned long pagemask) { @@ -447,34 +413,6 @@ out: return ret; } -static void __cpuinit probe_tlb(unsigned long config) -{ - struct cpuinfo_mips *c = ¤t_cpu_data; - unsigned int reg; - - /* - * If this isn't a MIPS32 / MIPS64 compliant CPU. Config 1 register - * is not supported, we assume R4k style. Cpu probing already figured - * out the number of tlb entries. - */ - if ((c->processor_id & 0xff0000) == PRID_COMP_LEGACY) - return; -#ifdef CONFIG_MIPS_MT_SMTC - /* - * If TLB is shared in SMTC system, total size already - * has been calculated and written into cpu_data tlbsize - */ - if((smtc_status & SMTC_TLB_SHARED) == SMTC_TLB_SHARED) - return; -#endif /* CONFIG_MIPS_MT_SMTC */ - - reg = read_c0_config1(); - if (!((config >> 7) & 3)) - panic("No TLB present"); - - c->tlbsize = ((reg >> 25) & 0x3f) + 1; -} - static int __cpuinitdata ntlb; static int __init set_ntlb(char *str) { @@ -486,8 +424,6 @@ __setup("ntlb=", set_ntlb); void __cpuinit tlb_init(void) { - unsigned int config = read_c0_config(); - /* * You should never change this register: * - On R4600 1.7 the tlbp never hits for pages smaller than @@ -495,13 +431,25 @@ void __cpuinit tlb_init(void) * - The entire mm handling assumes the c0_pagemask register to * be set to fixed-size pages. */ - probe_tlb(config); write_c0_pagemask(PM_DEFAULT_MASK); write_c0_wired(0); if (current_cpu_type() == CPU_R10000 || current_cpu_type() == CPU_R12000 || current_cpu_type() == CPU_R14000) write_c0_framemask(0); + + if (kernel_uses_smartmips_rixi) { + /* + * Enable the no read, no exec bits, and enable large virtual + * address. + */ + u32 pg = PG_RIE | PG_XIE; +#ifdef CONFIG_64BIT + pg |= PG_ELPA; +#endif + write_c0_pagegrain(pg); + } + temp_tlb_entry = current_cpu_data.tlbsize - 1; /* From this point on the ARC firmware is dead. */ diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index badcf5e8d69..0de0e4127d6 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -29,8 +29,7 @@ #include <asm/mmu_context.h> #include <asm/war.h> - -#include "uasm.h" +#include <asm/uasm.h> static inline int r45k_bvahwbug(void) { @@ -77,6 +76,8 @@ enum label_id { label_vmalloc_done, label_tlbw_hazard, label_split, + label_tlbl_goaround1, + label_tlbl_goaround2, label_nopage_tlbl, label_nopage_tlbs, label_nopage_tlbm, @@ -93,6 +94,8 @@ UASM_L_LA(_vmalloc) UASM_L_LA(_vmalloc_done) UASM_L_LA(_tlbw_hazard) UASM_L_LA(_split) +UASM_L_LA(_tlbl_goaround1) +UASM_L_LA(_tlbl_goaround2) UASM_L_LA(_nopage_tlbl) UASM_L_LA(_nopage_tlbs) UASM_L_LA(_nopage_tlbm) @@ -397,36 +400,60 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, } } -#ifdef CONFIG_HUGETLB_PAGE -static __cpuinit void build_huge_tlb_write_entry(u32 **p, - struct uasm_label **l, - struct uasm_reloc **r, - unsigned int tmp, - enum tlb_write_entry wmode) +static __cpuinit __maybe_unused void build_convert_pte_to_entrylo(u32 **p, + unsigned int reg) { - /* Set huge page tlb entry size */ - uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16); - uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff); - uasm_i_mtc0(p, tmp, C0_PAGEMASK); + if (kernel_uses_smartmips_rixi) { + UASM_i_SRL(p, reg, reg, ilog2(_PAGE_NO_EXEC)); + UASM_i_ROTR(p, reg, reg, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + } else { +#ifdef CONFIG_64BIT_PHYS_ADDR + uasm_i_dsrl(p, reg, reg, ilog2(_PAGE_GLOBAL)); +#else + UASM_i_SRL(p, reg, reg, ilog2(_PAGE_GLOBAL)); +#endif + } +} - build_tlb_write_entry(p, l, r, wmode); +#ifdef CONFIG_HUGETLB_PAGE +static __cpuinit void build_restore_pagemask(u32 **p, + struct uasm_reloc **r, + unsigned int tmp, + enum label_id lid) +{ /* Reset default page size */ if (PM_DEFAULT_MASK >> 16) { uasm_i_lui(p, tmp, PM_DEFAULT_MASK >> 16); uasm_i_ori(p, tmp, tmp, PM_DEFAULT_MASK & 0xffff); - uasm_il_b(p, r, label_leave); + uasm_il_b(p, r, lid); uasm_i_mtc0(p, tmp, C0_PAGEMASK); } else if (PM_DEFAULT_MASK) { uasm_i_ori(p, tmp, 0, PM_DEFAULT_MASK); - uasm_il_b(p, r, label_leave); + uasm_il_b(p, r, lid); uasm_i_mtc0(p, tmp, C0_PAGEMASK); } else { - uasm_il_b(p, r, label_leave); + uasm_il_b(p, r, lid); uasm_i_mtc0(p, 0, C0_PAGEMASK); } } +static __cpuinit void build_huge_tlb_write_entry(u32 **p, + struct uasm_label **l, + struct uasm_reloc **r, + unsigned int tmp, + enum tlb_write_entry wmode) +{ + /* Set huge page tlb entry size */ + uasm_i_lui(p, tmp, PM_HUGE_MASK >> 16); + uasm_i_ori(p, tmp, tmp, PM_HUGE_MASK & 0xffff); + uasm_i_mtc0(p, tmp, C0_PAGEMASK); + + build_tlb_write_entry(p, l, r, wmode); + + build_restore_pagemask(p, r, tmp, label_leave); +} + /* * Check if Huge PTE is present, if so then jump to LABEL. */ @@ -460,15 +487,15 @@ static __cpuinit void build_huge_update_entries(u32 **p, if (!small_sequence) uasm_i_lui(p, tmp, HPAGE_SIZE >> (7 + 16)); - UASM_i_SRL(p, pte, pte, 6); /* convert to entrylo */ - uasm_i_mtc0(p, pte, C0_ENTRYLO0); /* load it */ + build_convert_pte_to_entrylo(p, pte); + UASM_i_MTC0(p, pte, C0_ENTRYLO0); /* load it */ /* convert to entrylo1 */ if (small_sequence) UASM_i_ADDIU(p, pte, pte, HPAGE_SIZE >> 7); else UASM_i_ADDU(p, pte, pte, tmp); - uasm_i_mtc0(p, pte, C0_ENTRYLO1); /* load it */ + UASM_i_MTC0(p, pte, C0_ENTRYLO1); /* load it */ } static __cpuinit void build_huge_handler_tail(u32 **p, @@ -549,11 +576,13 @@ build_get_pmde64(u32 **p, struct uasm_label **l, struct uasm_reloc **r, uasm_i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */ +#ifndef __PAGETABLE_PMD_FOLDED uasm_i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */ uasm_i_ld(p, ptr, 0, ptr); /* get pmd pointer */ uasm_i_dsrl(p, tmp, tmp, PMD_SHIFT-3); /* get pmd offset in bytes */ uasm_i_andi(p, tmp, tmp, (PTRS_PER_PMD - 1)<<3); uasm_i_daddu(p, ptr, ptr, tmp); /* add in pmd offset */ +#endif } /* @@ -684,35 +713,53 @@ static void __cpuinit build_update_entries(u32 **p, unsigned int tmp, if (cpu_has_64bits) { uasm_i_ld(p, tmp, 0, ptep); /* get even pte */ uasm_i_ld(p, ptep, sizeof(pte_t), ptep); /* get odd pte */ - uasm_i_dsrl(p, tmp, tmp, 6); /* convert to entrylo0 */ - uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */ - uasm_i_dsrl(p, ptep, ptep, 6); /* convert to entrylo1 */ - uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */ + if (kernel_uses_smartmips_rixi) { + UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC)); + UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC)); + UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ + UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + } else { + uasm_i_dsrl(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ + uasm_i_dsrl(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ + } + UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ } else { int pte_off_even = sizeof(pte_t) / 2; int pte_off_odd = pte_off_even + sizeof(pte_t); /* The pte entries are pre-shifted */ uasm_i_lw(p, tmp, pte_off_even, ptep); /* get even pte */ - uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */ + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ uasm_i_lw(p, ptep, pte_off_odd, ptep); /* get odd pte */ - uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */ + UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ } #else UASM_i_LW(p, tmp, 0, ptep); /* get even pte */ UASM_i_LW(p, ptep, sizeof(pte_t), ptep); /* get odd pte */ if (r45k_bvahwbug()) build_tlb_probe_entry(p); - UASM_i_SRL(p, tmp, tmp, 6); /* convert to entrylo0 */ - if (r4k_250MHZhwbug()) - uasm_i_mtc0(p, 0, C0_ENTRYLO0); - uasm_i_mtc0(p, tmp, C0_ENTRYLO0); /* load it */ - UASM_i_SRL(p, ptep, ptep, 6); /* convert to entrylo1 */ - if (r45k_bvahwbug()) - uasm_i_mfc0(p, tmp, C0_INDEX); + if (kernel_uses_smartmips_rixi) { + UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_NO_EXEC)); + UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_NO_EXEC)); + UASM_i_ROTR(p, tmp, tmp, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + if (r4k_250MHZhwbug()) + UASM_i_MTC0(p, 0, C0_ENTRYLO0); + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ + UASM_i_ROTR(p, ptep, ptep, ilog2(_PAGE_GLOBAL) - ilog2(_PAGE_NO_EXEC)); + } else { + UASM_i_SRL(p, tmp, tmp, ilog2(_PAGE_GLOBAL)); /* convert to entrylo0 */ + if (r4k_250MHZhwbug()) + UASM_i_MTC0(p, 0, C0_ENTRYLO0); + UASM_i_MTC0(p, tmp, C0_ENTRYLO0); /* load it */ + UASM_i_SRL(p, ptep, ptep, ilog2(_PAGE_GLOBAL)); /* convert to entrylo1 */ + if (r45k_bvahwbug()) + uasm_i_mfc0(p, tmp, C0_INDEX); + } if (r4k_250MHZhwbug()) - uasm_i_mtc0(p, 0, C0_ENTRYLO1); - uasm_i_mtc0(p, ptep, C0_ENTRYLO1); /* load it */ + UASM_i_MTC0(p, 0, C0_ENTRYLO1); + UASM_i_MTC0(p, ptep, C0_ENTRYLO1); /* load it */ #endif } @@ -985,9 +1032,14 @@ static void __cpuinit build_pte_present(u32 **p, struct uasm_reloc **r, unsigned int pte, unsigned int ptr, enum label_id lid) { - uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); - uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); - uasm_il_bnez(p, r, pte, lid); + if (kernel_uses_smartmips_rixi) { + uasm_i_andi(p, pte, pte, _PAGE_PRESENT); + uasm_il_beqz(p, r, pte, lid); + } else { + uasm_i_andi(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); + uasm_i_xori(p, pte, pte, _PAGE_PRESENT | _PAGE_READ); + uasm_il_bnez(p, r, pte, lid); + } iPTE_LW(p, pte, ptr); } @@ -1272,6 +1324,34 @@ static void __cpuinit build_r4000_tlb_load_handler(void) build_pte_present(&p, &r, K0, K1, label_nopage_tlbl); if (m4kc_tlbp_war()) build_tlb_probe_entry(&p); + + if (kernel_uses_smartmips_rixi) { + /* + * If the page is not _PAGE_VALID, RI or XI could not + * have triggered it. Skip the expensive test.. + */ + uasm_i_andi(&p, K0, K0, _PAGE_VALID); + uasm_il_beqz(&p, &r, K0, label_tlbl_goaround1); + uasm_i_nop(&p); + + uasm_i_tlbr(&p); + /* Examine entrylo 0 or 1 based on ptr. */ + uasm_i_andi(&p, K0, K1, sizeof(pte_t)); + uasm_i_beqz(&p, K0, 8); + + UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/ + UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */ + /* + * If the entryLo (now in K0) is valid (bit 1), RI or + * XI must have triggered it. + */ + uasm_i_andi(&p, K0, K0, 2); + uasm_il_bnez(&p, &r, K0, label_nopage_tlbl); + + uasm_l_tlbl_goaround1(&l, p); + /* Reload the PTE value */ + iPTE_LW(&p, K0, K1); + } build_make_valid(&p, &r, K0, K1); build_r4000_tlbchange_handler_tail(&p, &l, &r, K0, K1); @@ -1284,6 +1364,40 @@ static void __cpuinit build_r4000_tlb_load_handler(void) iPTE_LW(&p, K0, K1); build_pte_present(&p, &r, K0, K1, label_nopage_tlbl); build_tlb_probe_entry(&p); + + if (kernel_uses_smartmips_rixi) { + /* + * If the page is not _PAGE_VALID, RI or XI could not + * have triggered it. Skip the expensive test.. + */ + uasm_i_andi(&p, K0, K0, _PAGE_VALID); + uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2); + uasm_i_nop(&p); + + uasm_i_tlbr(&p); + /* Examine entrylo 0 or 1 based on ptr. */ + uasm_i_andi(&p, K0, K1, sizeof(pte_t)); + uasm_i_beqz(&p, K0, 8); + + UASM_i_MFC0(&p, K0, C0_ENTRYLO0); /* load it in the delay slot*/ + UASM_i_MFC0(&p, K0, C0_ENTRYLO1); /* load it if ptr is odd */ + /* + * If the entryLo (now in K0) is valid (bit 1), RI or + * XI must have triggered it. + */ + uasm_i_andi(&p, K0, K0, 2); + uasm_il_beqz(&p, &r, K0, label_tlbl_goaround2); + /* Reload the PTE value */ + iPTE_LW(&p, K0, K1); + + /* + * We clobbered C0_PAGEMASK, restore it. On the other branch + * it is restored in build_huge_tlb_write_entry. + */ + build_restore_pagemask(&p, &r, K0, label_nopage_tlbl); + + uasm_l_tlbl_goaround2(&l, p); + } uasm_i_ori(&p, K0, K0, (_PAGE_ACCESSED | _PAGE_VALID)); build_huge_handler_tail(&p, &r, &l, K0, K1); #endif diff --git a/arch/mips/mm/uasm.c b/arch/mips/mm/uasm.c index 0a165c5179a..1581e985246 100644 --- a/arch/mips/mm/uasm.c +++ b/arch/mips/mm/uasm.c @@ -19,8 +19,7 @@ #include <asm/inst.h> #include <asm/elf.h> #include <asm/bugs.h> - -#include "uasm.h" +#include <asm/uasm.h> enum fields { RS = 0x001, @@ -63,8 +62,9 @@ enum opcode { insn_dsrl32, insn_drotr, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_pref, insn_rfe, insn_sc, insn_scd, - insn_sd, insn_sll, insn_sra, insn_srl, insn_subu, insn_sw, - insn_tlbp, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, insn_dins + insn_sd, insn_sll, insn_sra, insn_srl, insn_rotr, insn_subu, insn_sw, + insn_tlbp, insn_tlbr, insn_tlbwi, insn_tlbwr, insn_xor, insn_xori, + insn_dins }; struct insn { @@ -126,9 +126,11 @@ static struct insn insn_table[] __cpuinitdata = { { insn_sll, M(spec_op, 0, 0, 0, 0, sll_op), RT | RD | RE }, { insn_sra, M(spec_op, 0, 0, 0, 0, sra_op), RT | RD | RE }, { insn_srl, M(spec_op, 0, 0, 0, 0, srl_op), RT | RD | RE }, + { insn_rotr, M(spec_op, 1, 0, 0, 0, srl_op), RT | RD | RE }, { insn_subu, M(spec_op, 0, 0, 0, 0, subu_op), RS | RT | RD }, { insn_sw, M(sw_op, 0, 0, 0, 0, 0), RS | RT | SIMM }, { insn_tlbp, M(cop0_op, cop_op, 0, 0, 0, tlbp_op), 0 }, + { insn_tlbr, M(cop0_op, cop_op, 0, 0, 0, tlbr_op), 0 }, { insn_tlbwi, M(cop0_op, cop_op, 0, 0, 0, tlbwi_op), 0 }, { insn_tlbwr, M(cop0_op, cop_op, 0, 0, 0, tlbwr_op), 0 }, { insn_xor, M(spec_op, 0, 0, 0, 0, xor_op), RS | RT | RD }, @@ -379,9 +381,11 @@ I_u2s3u1(_sd) I_u2u1u3(_sll) I_u2u1u3(_sra) I_u2u1u3(_srl) +I_u2u1u3(_rotr) I_u3u1u2(_subu) I_u2s3u1(_sw) I_0(_tlbp) +I_0(_tlbr) I_0(_tlbwi) I_0(_tlbwr) I_u3u1u2(_xor) diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 4c3fca18a17..2cb5ae79020 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -52,7 +52,7 @@ static unsigned long _msc01_biu_base; static unsigned long _gcmp_base; static unsigned int ipi_map[NR_CPUS]; -static DEFINE_SPINLOCK(mips_irq_lock); +static DEFINE_RAW_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) { @@ -103,7 +103,7 @@ static inline int get_int(void) { unsigned long flags; int irq; - spin_lock_irqsave(&mips_irq_lock, flags); + raw_spin_lock_irqsave(&mips_irq_lock, flags); irq = mips_pcibios_iack(); @@ -113,7 +113,7 @@ static inline int get_int(void) * on an SMP system, so leave it up to the generic code... */ - spin_unlock_irqrestore(&mips_irq_lock, flags); + raw_spin_unlock_irqrestore(&mips_irq_lock, flags); return irq; } diff --git a/arch/mips/nxp/pnx833x/common/interrupts.c b/arch/mips/nxp/pnx833x/common/interrupts.c index 3a467c04f81..941916f8aaf 100644 --- a/arch/mips/nxp/pnx833x/common/interrupts.c +++ b/arch/mips/nxp/pnx833x/common/interrupts.c @@ -156,19 +156,19 @@ static int irqflags[PNX833X_PIC_NUM_IRQ]; /* initialized by zeroes */ #define IRQFLAG_STARTED 1 #define IRQFLAG_DISABLED 2 -static DEFINE_SPINLOCK(pnx833x_irq_lock); +static DEFINE_RAW_SPINLOCK(pnx833x_irq_lock); static unsigned int pnx833x_startup_pic_irq(unsigned int irq) { unsigned long flags; unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - spin_lock_irqsave(&pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); irqflags[pic_irq] = IRQFLAG_STARTED; /* started, not disabled */ pnx833x_hard_enable_pic_irq(pic_irq); - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); return 0; } @@ -177,12 +177,12 @@ static void pnx833x_shutdown_pic_irq(unsigned int irq) unsigned long flags; unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - spin_lock_irqsave(&pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); irqflags[pic_irq] = 0; /* not started */ pnx833x_hard_disable_pic_irq(pic_irq); - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); } static void pnx833x_enable_pic_irq(unsigned int irq) @@ -190,13 +190,13 @@ static void pnx833x_enable_pic_irq(unsigned int irq) unsigned long flags; unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - spin_lock_irqsave(&pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); irqflags[pic_irq] &= ~IRQFLAG_DISABLED; if (irqflags[pic_irq] == IRQFLAG_STARTED) pnx833x_hard_enable_pic_irq(pic_irq); - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); } static void pnx833x_disable_pic_irq(unsigned int irq) @@ -204,12 +204,12 @@ static void pnx833x_disable_pic_irq(unsigned int irq) unsigned long flags; unsigned int pic_irq = irq - PNX833X_PIC_IRQ_BASE; - spin_lock_irqsave(&pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_irq_lock, flags); irqflags[pic_irq] |= IRQFLAG_DISABLED; pnx833x_hard_disable_pic_irq(pic_irq); - spin_unlock_irqrestore(&pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_irq_lock, flags); } static void pnx833x_ack_pic_irq(unsigned int irq) @@ -220,15 +220,15 @@ static void pnx833x_end_pic_irq(unsigned int irq) { } -static DEFINE_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); +static DEFINE_RAW_SPINLOCK(pnx833x_gpio_pnx833x_irq_lock); static unsigned int pnx833x_startup_gpio_irq(unsigned int irq) { int pin = irq - PNX833X_GPIO_IRQ_BASE; unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); pnx833x_gpio_enable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); return 0; } @@ -236,18 +236,18 @@ static void pnx833x_enable_gpio_irq(unsigned int irq) { int pin = irq - PNX833X_GPIO_IRQ_BASE; unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); pnx833x_gpio_enable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); } static void pnx833x_disable_gpio_irq(unsigned int irq) { int pin = irq - PNX833X_GPIO_IRQ_BASE; unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); pnx833x_gpio_disable_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); } static void pnx833x_ack_gpio_irq(unsigned int irq) @@ -258,9 +258,9 @@ static void pnx833x_end_gpio_irq(unsigned int irq) { int pin = irq - PNX833X_GPIO_IRQ_BASE; unsigned long flags; - spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_lock_irqsave(&pnx833x_gpio_pnx833x_irq_lock, flags); pnx833x_gpio_clear_irq(pin); - spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); + raw_spin_unlock_irqrestore(&pnx833x_gpio_pnx833x_irq_lock, flags); } static int pnx833x_set_type_gpio_irq(unsigned int irq, unsigned int flow_type) @@ -377,4 +377,3 @@ void __init plat_time_init(void) mips_hpt_frequency *= 500000; } - diff --git a/arch/mips/nxp/pnx833x/common/prom.c b/arch/mips/nxp/pnx833x/common/prom.c index 2a41e8fec21..29969f90a6b 100644 --- a/arch/mips/nxp/pnx833x/common/prom.c +++ b/arch/mips/nxp/pnx833x/common/prom.c @@ -62,9 +62,3 @@ char __init *prom_getenv(char *envname) void __init prom_free_prom_memory(void) { } - -char * __init prom_getcmdline(void) -{ - return arcs_cmdline; -} - diff --git a/arch/mips/nxp/pnx8550/common/prom.c b/arch/mips/nxp/pnx8550/common/prom.c index 2f567452e7a..32f70097c3c 100644 --- a/arch/mips/nxp/pnx8550/common/prom.c +++ b/arch/mips/nxp/pnx8550/common/prom.c @@ -124,6 +124,5 @@ void prom_putchar(char c) } } -EXPORT_SYMBOL(prom_getcmdline); EXPORT_SYMBOL(get_ethernet_addr); EXPORT_SYMBOL(str2eaddr); diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index 7832ad257a1..f9eb1aba634 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -6,6 +6,7 @@ * Copyright (C) 2004, 2005 Ralf Baechle * Copyright (C) 2005 MIPS Technologies, Inc. */ +#include <linux/compiler.h> #include <linux/errno.h> #include <linux/init.h> #include <linux/oprofile.h> @@ -14,9 +15,9 @@ #include "op_impl.h" -extern struct op_mips_model op_model_mipsxx_ops __attribute__((weak)); -extern struct op_mips_model op_model_rm9000_ops __attribute__((weak)); -extern struct op_mips_model op_model_loongson2_ops __attribute__((weak)); +extern struct op_mips_model op_model_mipsxx_ops __weak; +extern struct op_mips_model op_model_rm9000_ops __weak; +extern struct op_mips_model op_model_loongson2_ops __weak; static struct op_mips_model *model; diff --git a/arch/mips/oprofile/op_model_loongson2.c b/arch/mips/oprofile/op_model_loongson2.c index 475ff46712a..29e2326b625 100644 --- a/arch/mips/oprofile/op_model_loongson2.c +++ b/arch/mips/oprofile/op_model_loongson2.c @@ -3,7 +3,7 @@ * * Copyright (C) 2009 Lemote Inc. * Author: Yanhua <yanh@lemote.com> - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -47,8 +47,6 @@ static struct loongson2_register_config { int cnt1_enabled, cnt2_enabled; } reg; -DEFINE_SPINLOCK(sample_lock); - static char *oprofid = "LoongsonPerf"; static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id); /* Compute all of the registers in preparation for enabling profiling. */ @@ -115,7 +113,6 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) uint64_t counter, counter1, counter2; struct pt_regs *regs = get_irq_regs(); int enabled; - unsigned long flags; /* * LOONGSON2 defines two 32-bit performance counters. @@ -136,8 +133,6 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) counter1 = counter & 0xffffffff; counter2 = counter >> 32; - spin_lock_irqsave(&sample_lock, flags); - if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) { if (reg.cnt1_enabled) oprofile_add_sample(regs, 0); @@ -149,8 +144,6 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id) counter2 = reg.reset_counter2; } - spin_unlock_irqrestore(&sample_lock, flags); - write_c0_perfcnt((counter2 << 32) | counter1); return IRQ_HANDLED; diff --git a/arch/mips/pci/fixup-cobalt.c b/arch/mips/pci/fixup-cobalt.c index 9553b14002d..acacd1407c6 100644 --- a/arch/mips/pci/fixup-cobalt.c +++ b/arch/mips/pci/fixup-cobalt.c @@ -51,6 +51,67 @@ static void qube_raq_galileo_early_fixup(struct pci_dev *dev) DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, qube_raq_galileo_early_fixup); +static void __devinit cobalt_legacy_ide_resource_fixup(struct pci_dev *dev, + struct resource *res) +{ + struct pci_controller *hose = (struct pci_controller *)dev->sysdata; + unsigned long offset = hose->io_offset; + struct resource orig = *res; + + if (!(res->flags & IORESOURCE_IO) || + !(res->flags & IORESOURCE_PCI_FIXED)) + return; + + res->start -= offset; + res->end -= offset; + dev_printk(KERN_DEBUG, &dev->dev, "converted legacy %pR to bus %pR\n", + &orig, res); +} + +static void __devinit cobalt_legacy_ide_fixup(struct pci_dev *dev) +{ + u32 class; + u8 progif; + + /* + * If the IDE controller is in legacy mode, pci_setup_device() fills in + * the resources with the legacy addresses that normally appear on the + * PCI bus, just as if we had read them from a BAR. + * + * However, with the GT-64111, those legacy addresses, e.g., 0x1f0, + * will never appear on the PCI bus because it converts memory accesses + * in the PCI I/O region (which is never at address zero) into I/O port + * accesses with no address translation. + * + * For example, if GT_DEF_PCI0_IO_BASE is 0x10000000, a load or store + * to physical address 0x100001f0 will become a PCI access to I/O port + * 0x100001f0. There's no way to generate an access to I/O port 0x1f0, + * but the VT82C586 IDE controller does respond at 0x100001f0 because + * it only decodes the low 24 bits of the address. + * + * When this quirk runs, the pci_dev resources should contain bus + * addresses, not Linux I/O port numbers, so convert legacy addresses + * like 0x1f0 to bus addresses like 0x100001f0. Later, we'll convert + * them back with pcibios_fixup_bus() or pcibios_bus_to_resource(). + */ + class = dev->class >> 8; + if (class != PCI_CLASS_STORAGE_IDE) + return; + + pci_read_config_byte(dev, PCI_CLASS_PROG, &progif); + if ((progif & 1) == 0) { + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[0]); + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[1]); + } + if ((progif & 4) == 0) { + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[2]); + cobalt_legacy_ide_resource_fixup(dev, &dev->resource[3]); + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, + cobalt_legacy_ide_fixup); + static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) { unsigned short cfgword; diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c index caf2edeb02f..4b9768d5d72 100644 --- a/arch/mips/pci/fixup-lemote2f.c +++ b/arch/mips/pci/fixup-lemote2f.c @@ -131,7 +131,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) /* Serial short detect enable */ _rdmsr(USB_MSR_REG(USB_CONFIG), &hi, &lo); - _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 2) | (1 << 3), lo); + _wrmsr(USB_MSR_REG(USB_CONFIG), (1 << 1) | (1 << 3), lo); /* setting the USB2.0 micro frame length */ pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); diff --git a/arch/mips/pci/ops-loongson2.c b/arch/mips/pci/ops-loongson2.c index aa5d3da2721..2bb4057bf6c 100644 --- a/arch/mips/pci/ops-loongson2.c +++ b/arch/mips/pci/ops-loongson2.c @@ -1,13 +1,11 @@ /* - * fuloong2e specific PCI support. - * * Copyright (C) 1999, 2000, 2004 MIPS Technologies, Inc. * All rights reserved. * Authors: Carsten Langgaard <carstenl@mips.com> * Maciej W. Rozycki <macro@mips.com> * * Copyright (C) 2009 Lemote Inc. - * Author: Wu Zhangjin <wuzj@lemote.com> + * Author: Wu Zhangjin <wuzhangjin@gmail.com> * * This program is free software; you can distribute it and/or modify it * under the terms of the GNU General Public License (Version 2) as diff --git a/arch/mips/pci/ops-pmcmsp.c b/arch/mips/pci/ops-pmcmsp.c index 32548b5d68d..04b31478a6d 100644 --- a/arch/mips/pci/ops-pmcmsp.c +++ b/arch/mips/pci/ops-pmcmsp.c @@ -206,7 +206,7 @@ static void pci_proc_init(void) } #endif /* CONFIG_PROC_FS && PCI_COUNTERS */ -DEFINE_SPINLOCK(bpci_lock); +static DEFINE_SPINLOCK(bpci_lock); /***************************************************************************** * diff --git a/arch/mips/pci/pci-bcm47xx.c b/arch/mips/pci/pci-bcm47xx.c index bea9b6cdfdb..455f8e50a00 100644 --- a/arch/mips/pci/pci-bcm47xx.c +++ b/arch/mips/pci/pci-bcm47xx.c @@ -57,4 +57,3 @@ int pcibios_plat_dev_init(struct pci_dev *dev) dev->irq = res; return 0; } - diff --git a/arch/mips/pci/pci-octeon.c b/arch/mips/pci/pci-octeon.c index 9cb0c807f56..d248b707eff 100644 --- a/arch/mips/pci/pci-octeon.c +++ b/arch/mips/pci/pci-octeon.c @@ -209,16 +209,14 @@ const char *octeon_get_pci_interrupts(void) case CVMX_BOARD_TYPE_NAO38: /* This is really the NAC38 */ return "AAAAADABAAAAAAAAAAAAAAAAAAAAAAAA"; - case CVMX_BOARD_TYPE_THUNDER: - return ""; - case CVMX_BOARD_TYPE_EBH3000: - return ""; case CVMX_BOARD_TYPE_EBH3100: case CVMX_BOARD_TYPE_CN3010_EVB_HS5: case CVMX_BOARD_TYPE_CN3005_EVB_HS5: return "AAABAAAAAAAAAAAAAAAAAAAAAAAAAAAA"; case CVMX_BOARD_TYPE_BBGW_REF: return "AABCD"; + case CVMX_BOARD_TYPE_THUNDER: + case CVMX_BOARD_TYPE_EBH3000: default: return ""; } diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index f87f5e188fa..38bc28005b4 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -251,8 +251,6 @@ static void pcibios_fixup_device_resources(struct pci_dev *dev, for (i = 0; i < PCI_NUM_RESOURCES; i++) { if (!dev->resource[i].start) continue; - if (dev->resource[i].flags & IORESOURCE_PCI_FIXED) - continue; if (dev->resource[i].flags & IORESOURCE_IO) offset = hose->io_offset; else if (dev->resource[i].flags & IORESOURCE_MEM) diff --git a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c index 5175357d0a2..94c9c2c9fbc 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_irq_cic.c @@ -131,4 +131,3 @@ void msp_cic_irq_dispatch(void) else do_IRQ(ffs(pending) + intbase - 1); } - diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c index c317a3623ce..db98d87a092 100644 --- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c +++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c @@ -303,12 +303,6 @@ char *prom_getenv(char *env_name) } /* PROM commandline functions */ -char *prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} -EXPORT_SYMBOL(prom_getcmdline); - void __init prom_init_cmdline(void) { char *cp; diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c index fc990cb3194..d6f8bdff8cb 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.c @@ -127,7 +127,7 @@ static int recv_ack(void) if (ack) { do_idle(); - printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM \n"); + printk(KERN_ERR "Error reading the Atmel 24C32/24C64 EEPROM\n"); return -1; } diff --git a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h index a31288335fb..d6c7ec469fa 100644 --- a/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h +++ b/arch/mips/pmc-sierra/yosemite/atmel_read_eeprom.h @@ -65,4 +65,3 @@ const char rts = TIOCM_RTS; const char dtr = TIOCM_DTR; int fd; - diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 326fe7a392e..efc9e889b34 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -8,7 +8,7 @@ #define LAUNCHSTACK_SIZE 256 -static __cpuinitdata DEFINE_SPINLOCK(launch_lock); +static __cpuinitdata arch_spinlock_t launch_lock = __ARCH_SPIN_LOCK_UNLOCKED; static unsigned long secondary_sp __cpuinitdata; static unsigned long secondary_gp __cpuinitdata; @@ -20,7 +20,7 @@ static void __init prom_smp_bootstrap(void) { local_irq_disable(); - while (spin_is_locked(&launch_lock)); + while (arch_spin_is_locked(&launch_lock)); __asm__ __volatile__( " move $sp, %0 \n" @@ -37,7 +37,7 @@ static void __init prom_smp_bootstrap(void) */ void __init prom_grab_secondary(void) { - spin_lock(&launch_lock); + arch_spin_lock(&launch_lock); pmon_cpustart(1, &prom_smp_bootstrap, launchstack + LAUNCHSTACK_SIZE, 0); @@ -138,7 +138,7 @@ static void __cpuinit yos_boot_secondary(int cpu, struct task_struct *idle) secondary_sp = sp; secondary_gp = gp; - spin_unlock(&launch_lock); + arch_spin_unlock(&launch_lock); } /* diff --git a/arch/mips/power/cpu.c b/arch/mips/power/cpu.c index 7995df45dc8..26a6ef19d71 100644 --- a/arch/mips/power/cpu.c +++ b/arch/mips/power/cpu.c @@ -3,9 +3,9 @@ * * Licensed under the GPLv2 * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Hu Hongbing <huhb@lemote.com> - * Wu Zhangjin <wuzj@lemote.com> + * Wu Zhangjin <wuzhangjin@gmail.com> */ #include <asm/suspend.h> #include <asm/fpu.h> diff --git a/arch/mips/power/hibernate.S b/arch/mips/power/hibernate.S index 0cf86fb32ec..dbb5c7b4b70 100644 --- a/arch/mips/power/hibernate.S +++ b/arch/mips/power/hibernate.S @@ -3,9 +3,9 @@ * * Licensed under the GPLv2 * - * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Copyright (C) 2009 Lemote Inc. * Author: Hu Hongbing <huhb@lemote.com> - * Wu Zhangjin <wuzj@lemote.com> + * Wu Zhangjin <wuzhangjin@gmail.com> */ #include <asm/asm-offsets.h> #include <asm/page.h> diff --git a/arch/mips/powertv/asic/asic_devices.c b/arch/mips/powertv/asic/asic_devices.c index 6a882194e06..217424231eb 100644 --- a/arch/mips/powertv/asic/asic_devices.c +++ b/arch/mips/powertv/asic/asic_devices.c @@ -340,10 +340,6 @@ static void __init platform_configure_usb(void) switch (asic) { case ASIC_ZEUS: - fs_update(0x0000, 0x11, 0x02, 0); - bcm1_usb2_ctl = 0x803; - break; - case ASIC_CRONUS: case ASIC_CRONUSLITE: fs_update(0x0000, 0x11, 0x02, 0); diff --git a/arch/mips/powertv/asic/asic_int.c b/arch/mips/powertv/asic/asic_int.c index 80b2eed21ac..325fab9685d 100644 --- a/arch/mips/powertv/asic/asic_int.c +++ b/arch/mips/powertv/asic/asic_int.c @@ -39,21 +39,21 @@ #include <asm/mach-powertv/asic_regs.h> -static DEFINE_SPINLOCK(asic_irq_lock); +static DEFINE_RAW_SPINLOCK(asic_irq_lock); static inline int get_int(void) { unsigned long flags; int irq; - spin_lock_irqsave(&asic_irq_lock, flags); + raw_spin_lock_irqsave(&asic_irq_lock, flags); irq = (asic_read(int_int_scan) >> 4) - 1; if (irq == 0 || irq >= NR_IRQS) irq = -1; - spin_unlock_irqrestore(&asic_irq_lock, flags); + raw_spin_unlock_irqrestore(&asic_irq_lock, flags); return irq; } diff --git a/arch/mips/powertv/powertv_setup.c b/arch/mips/powertv/powertv_setup.c index 698b1eafbe9..af2cae0a5ab 100644 --- a/arch/mips/powertv/powertv_setup.c +++ b/arch/mips/powertv/powertv_setup.c @@ -25,14 +25,15 @@ #include <linux/etherdevice.h> #include <linux/if_ether.h> #include <linux/ctype.h> - #include <linux/cpu.h> +#include <linux/time.h> + #include <asm/bootinfo.h> #include <asm/irq.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> #include <asm/dma.h> -#include <linux/time.h> +#include <asm/asm.h> #include <asm/traps.h> #include <asm/asm-offsets.h> #include "reset.h" @@ -41,26 +42,21 @@ /* * Macros for loading addresses and storing registers: - * PTR_LA Load the address into a register - * LONG_S Store the full width of the given register. - * LONG_L Load the full width of the given register - * PTR_ADDIU Add a constant value to a register used as a pointer + * LONG_L_ Stringified version of LONG_L for use in asm() statement + * LONG_S_ Stringified version of LONG_S for use in asm() statement + * PTR_LA_ Stringified version of PTR_LA for use in asm() statement * REG_SIZE Number of 8-bit bytes in a full width register */ +#define LONG_L_ VAL(LONG_L) " " +#define LONG_S_ VAL(LONG_S) " " +#define PTR_LA_ VAL(PTR_LA) " " + #ifdef CONFIG_64BIT #warning TODO: 64-bit code needs to be verified -#define PTR_LA "dla " -#define LONG_S "sd " -#define LONG_L "ld " -#define PTR_ADDIU "daddiu " #define REG_SIZE "8" /* In bytes */ #endif #ifdef CONFIG_32BIT -#define PTR_LA "la " -#define LONG_S "sw " -#define LONG_L "lw " -#define PTR_ADDIU "addiu " #define REG_SIZE "4" /* In bytes */ #endif @@ -113,9 +109,9 @@ static int panic_handler(struct notifier_block *notifier_block, * structure. */ __asm__ __volatile__ ( ".set noat\n" - LONG_S "$at, %[at]\n" - LONG_S "$2, %[v0]\n" - LONG_S "$3, %[v1]\n" + LONG_S_ "$at, %[at]\n" + LONG_S_ "$2, %[v0]\n" + LONG_S_ "$3, %[v1]\n" : [at] "=m" (at), [v0] "=m" (v0), @@ -129,54 +125,54 @@ static int panic_handler(struct notifier_block *notifier_block, "move $at, %[pt_regs]\n" /* Argument registers */ - LONG_S "$4, " VAL(PT_R4) "($at)\n" - LONG_S "$5, " VAL(PT_R5) "($at)\n" - LONG_S "$6, " VAL(PT_R6) "($at)\n" - LONG_S "$7, " VAL(PT_R7) "($at)\n" + LONG_S_ "$4, " VAL(PT_R4) "($at)\n" + LONG_S_ "$5, " VAL(PT_R5) "($at)\n" + LONG_S_ "$6, " VAL(PT_R6) "($at)\n" + LONG_S_ "$7, " VAL(PT_R7) "($at)\n" /* Temporary regs */ - LONG_S "$8, " VAL(PT_R8) "($at)\n" - LONG_S "$9, " VAL(PT_R9) "($at)\n" - LONG_S "$10, " VAL(PT_R10) "($at)\n" - LONG_S "$11, " VAL(PT_R11) "($at)\n" - LONG_S "$12, " VAL(PT_R12) "($at)\n" - LONG_S "$13, " VAL(PT_R13) "($at)\n" - LONG_S "$14, " VAL(PT_R14) "($at)\n" - LONG_S "$15, " VAL(PT_R15) "($at)\n" + LONG_S_ "$8, " VAL(PT_R8) "($at)\n" + LONG_S_ "$9, " VAL(PT_R9) "($at)\n" + LONG_S_ "$10, " VAL(PT_R10) "($at)\n" + LONG_S_ "$11, " VAL(PT_R11) "($at)\n" + LONG_S_ "$12, " VAL(PT_R12) "($at)\n" + LONG_S_ "$13, " VAL(PT_R13) "($at)\n" + LONG_S_ "$14, " VAL(PT_R14) "($at)\n" + LONG_S_ "$15, " VAL(PT_R15) "($at)\n" /* "Saved" registers */ - LONG_S "$16, " VAL(PT_R16) "($at)\n" - LONG_S "$17, " VAL(PT_R17) "($at)\n" - LONG_S "$18, " VAL(PT_R18) "($at)\n" - LONG_S "$19, " VAL(PT_R19) "($at)\n" - LONG_S "$20, " VAL(PT_R20) "($at)\n" - LONG_S "$21, " VAL(PT_R21) "($at)\n" - LONG_S "$22, " VAL(PT_R22) "($at)\n" - LONG_S "$23, " VAL(PT_R23) "($at)\n" + LONG_S_ "$16, " VAL(PT_R16) "($at)\n" + LONG_S_ "$17, " VAL(PT_R17) "($at)\n" + LONG_S_ "$18, " VAL(PT_R18) "($at)\n" + LONG_S_ "$19, " VAL(PT_R19) "($at)\n" + LONG_S_ "$20, " VAL(PT_R20) "($at)\n" + LONG_S_ "$21, " VAL(PT_R21) "($at)\n" + LONG_S_ "$22, " VAL(PT_R22) "($at)\n" + LONG_S_ "$23, " VAL(PT_R23) "($at)\n" /* Add'l temp regs */ - LONG_S "$24, " VAL(PT_R24) "($at)\n" - LONG_S "$25, " VAL(PT_R25) "($at)\n" + LONG_S_ "$24, " VAL(PT_R24) "($at)\n" + LONG_S_ "$25, " VAL(PT_R25) "($at)\n" /* Kernel temp regs */ - LONG_S "$26, " VAL(PT_R26) "($at)\n" - LONG_S "$27, " VAL(PT_R27) "($at)\n" + LONG_S_ "$26, " VAL(PT_R26) "($at)\n" + LONG_S_ "$27, " VAL(PT_R27) "($at)\n" /* Global pointer, stack pointer, frame pointer and * return address */ - LONG_S "$gp, " VAL(PT_R28) "($at)\n" - LONG_S "$sp, " VAL(PT_R29) "($at)\n" - LONG_S "$fp, " VAL(PT_R30) "($at)\n" - LONG_S "$ra, " VAL(PT_R31) "($at)\n" + LONG_S_ "$gp, " VAL(PT_R28) "($at)\n" + LONG_S_ "$sp, " VAL(PT_R29) "($at)\n" + LONG_S_ "$fp, " VAL(PT_R30) "($at)\n" + LONG_S_ "$ra, " VAL(PT_R31) "($at)\n" /* Now we can get the $at and v0 registers back and * store them */ - LONG_L "$8, %[at]\n" - LONG_S "$8, " VAL(PT_R1) "($at)\n" - LONG_L "$8, %[v0]\n" - LONG_S "$8, " VAL(PT_R2) "($at)\n" - LONG_L "$8, %[v1]\n" - LONG_S "$8, " VAL(PT_R3) "($at)\n" + LONG_L_ "$8, %[at]\n" + LONG_S_ "$8, " VAL(PT_R1) "($at)\n" + LONG_L_ "$8, %[v0]\n" + LONG_S_ "$8, " VAL(PT_R2) "($at)\n" + LONG_L_ "$8, %[v1]\n" + LONG_S_ "$8, " VAL(PT_R3) "($at)\n" : : [at] "m" (at), @@ -191,8 +187,8 @@ static int panic_handler(struct notifier_block *notifier_block, __asm__ __volatile__ ( ".set noat\n" "1:\n" - PTR_LA "$at, 1b\n" - LONG_S "$at, %[cp0_epc]\n" + PTR_LA_ "$at, 1b\n" + LONG_S_ "$at, %[cp0_epc]\n" : [cp0_epc] "=m" (my_regs.cp0_epc) : diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index d9c79d8be81..c3d30a88daf 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -133,4 +133,3 @@ pfn_t node_getfirstfree(cnodeid_t cnode) return (KDM_TO_PHYS(PAGE_ALIGN(SYMMON_STK_ADDR(nasid, 0))) >> PAGE_SHIFT); } - diff --git a/arch/mips/sgi-ip27/ip27-nmi.c b/arch/mips/sgi-ip27/ip27-nmi.c index 6c5a630566f..bc4fa8dd67f 100644 --- a/arch/mips/sgi-ip27/ip27-nmi.c +++ b/arch/mips/sgi-ip27/ip27-nmi.c @@ -17,11 +17,10 @@ #endif #define CNODEID_NONE (cnodeid_t)-1 -#define enter_panic_mode() spin_lock(&nmi_lock) typedef unsigned long machreg_t; -DEFINE_SPINLOCK(nmi_lock); +static arch_spinlock_t nmi_lock = __ARCH_SPIN_LOCK_UNLOCKED; /* * Lets see what else we need to do here. Set up sp, gp? @@ -193,9 +192,9 @@ cont_nmi_dump(void) atomic_inc(&nmied_cpus); #endif /* - * Use enter_panic_mode to allow only 1 cpu to proceed + * Only allow 1 cpu to proceed */ - enter_panic_mode(); + arch_spin_lock(&nmi_lock); #ifdef REAL_NMI_SIGNAL /* diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index 5c2bf111ca6..d8b65204d28 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -512,10 +512,6 @@ void __init arch_init_irq(void) "level"); break; - case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ: - set_irq_chip_and_handler_name(irq, - &crime_edge_interrupt, handle_edge_irq, "edge"); - break; case CRIME_CPUERR_IRQ: case CRIME_MEMERR_IRQ: set_irq_chip_and_handler_name(irq, @@ -523,12 +519,9 @@ void __init arch_init_irq(void) "level"); break; + case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ: case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ: case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ: - set_irq_chip_and_handler_name(irq, - &crime_edge_interrupt, handle_edge_irq, "edge"); - break; - case CRIME_VICE_IRQ: set_irq_chip_and_handler_name(irq, &crime_edge_interrupt, handle_edge_irq, "edge"); diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c index 4070268aa76..06e25d94976 100644 --- a/arch/mips/sibyte/bcm1480/irq.c +++ b/arch/mips/sibyte/bcm1480/irq.c @@ -73,14 +73,14 @@ static struct irq_chip bcm1480_irq_type = { /* Store the CPU id (not the logical number) */ int bcm1480_irq_owner[BCM1480_NR_IRQS]; -DEFINE_SPINLOCK(bcm1480_imr_lock); +static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock); void bcm1480_mask_irq(int cpu, int irq) { unsigned long flags, hl_spacing; u64 cur_ints; - spin_lock_irqsave(&bcm1480_imr_lock, flags); + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); hl_spacing = 0; if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { hl_spacing = BCM1480_IMR_HL_SPACING; @@ -89,7 +89,7 @@ void bcm1480_mask_irq(int cpu, int irq) cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); cur_ints |= (((u64) 1) << irq); ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); - spin_unlock_irqrestore(&bcm1480_imr_lock, flags); + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); } void bcm1480_unmask_irq(int cpu, int irq) @@ -97,7 +97,7 @@ void bcm1480_unmask_irq(int cpu, int irq) unsigned long flags, hl_spacing; u64 cur_ints; - spin_lock_irqsave(&bcm1480_imr_lock, flags); + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); hl_spacing = 0; if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { hl_spacing = BCM1480_IMR_HL_SPACING; @@ -106,7 +106,7 @@ void bcm1480_unmask_irq(int cpu, int irq) cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); cur_ints &= ~(((u64) 1) << irq); ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); - spin_unlock_irqrestore(&bcm1480_imr_lock, flags); + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); } #ifdef CONFIG_SMP @@ -123,7 +123,7 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&bcm1480_imr_lock, flags); + raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = bcm1480_irq_owner[irq]; @@ -148,7 +148,7 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); } } - spin_unlock_irqrestore(&bcm1480_imr_lock, flags); + raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); return 0; } diff --git a/arch/mips/sibyte/common/sb_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index 15ea778b5e6..ed2453eab5c 100644 --- a/arch/mips/sibyte/common/sb_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -28,7 +28,6 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/slab.h> -#include <linux/smp_lock.h> #include <linux/vmalloc.h> #include <linux/fs.h> #include <linux/errno.h> diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c index 5e7f2016cce..ab44a2f59ee 100644 --- a/arch/mips/sibyte/sb1250/irq.c +++ b/arch/mips/sibyte/sb1250/irq.c @@ -72,20 +72,20 @@ static struct irq_chip sb1250_irq_type = { /* Store the CPU id (not the logical number) */ int sb1250_irq_owner[SB1250_NR_IRQS]; -DEFINE_SPINLOCK(sb1250_imr_lock); +static DEFINE_RAW_SPINLOCK(sb1250_imr_lock); void sb1250_mask_irq(int cpu, int irq) { unsigned long flags; u64 cur_ints; - spin_lock_irqsave(&sb1250_imr_lock, flags); + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); cur_ints |= (((u64) 1) << irq); ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); - spin_unlock_irqrestore(&sb1250_imr_lock, flags); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); } void sb1250_unmask_irq(int cpu, int irq) @@ -93,13 +93,13 @@ void sb1250_unmask_irq(int cpu, int irq) unsigned long flags; u64 cur_ints; - spin_lock_irqsave(&sb1250_imr_lock, flags); + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); cur_ints &= ~(((u64) 1) << irq); ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); - spin_unlock_irqrestore(&sb1250_imr_lock, flags); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); } #ifdef CONFIG_SMP @@ -115,7 +115,7 @@ static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) cpu = cpu_logical_map(i); /* Protect against other affinity changers and IMR manipulation */ - spin_lock_irqsave(&sb1250_imr_lock, flags); + raw_spin_lock_irqsave(&sb1250_imr_lock, flags); /* Swizzle each CPU's IMR (but leave the IP selection alone) */ old_cpu = sb1250_irq_owner[irq]; @@ -137,7 +137,7 @@ static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask) ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + R_IMR_INTERRUPT_MASK)); } - spin_unlock_irqrestore(&sb1250_imr_lock, flags); + raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); return 0; } diff --git a/arch/mips/sni/rm200.c b/arch/mips/sni/rm200.c index 31e2583ec62..90c558f7c0f 100644 --- a/arch/mips/sni/rm200.c +++ b/arch/mips/sni/rm200.c @@ -132,7 +132,7 @@ device_initcall(snirm_setup_devinit); * readb/writeb to access them */ -DEFINE_SPINLOCK(sni_rm200_i8259A_lock); +static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock); #define PIC_CMD 0x00 #define PIC_IMR 0x01 #define PIC_ISR PIC_CMD @@ -161,13 +161,13 @@ static void sni_rm200_disable_8259A_irq(unsigned int irq) irq -= RM200_I8259A_IRQ_BASE; mask = 1 << irq; - spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); rm200_cached_irq_mask |= mask; if (irq & 8) writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); else writeb(cached_master_mask, rm200_pic_master + PIC_IMR); - spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); } static void sni_rm200_enable_8259A_irq(unsigned int irq) @@ -177,13 +177,13 @@ static void sni_rm200_enable_8259A_irq(unsigned int irq) irq -= RM200_I8259A_IRQ_BASE; mask = ~(1 << irq); - spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); rm200_cached_irq_mask &= mask; if (irq & 8) writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); else writeb(cached_master_mask, rm200_pic_master + PIC_IMR); - spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); } static inline int sni_rm200_i8259A_irq_real(unsigned int irq) @@ -216,7 +216,7 @@ void sni_rm200_mask_and_ack_8259A(unsigned int irq) irq -= RM200_I8259A_IRQ_BASE; irqmask = 1 << irq; - spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); /* * Lightweight spurious IRQ detection. We do not want * to overdo spurious IRQ handling - it's usually a sign @@ -247,7 +247,7 @@ handle_real_irq: writeb(cached_master_mask, rm200_pic_master + PIC_IMR); writeb(0x60+irq, rm200_pic_master + PIC_CMD); } - spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); return; spurious_8259A_irq: @@ -298,7 +298,7 @@ static inline int sni_rm200_i8259_irq(void) { int irq; - spin_lock(&sni_rm200_i8259A_lock); + raw_spin_lock(&sni_rm200_i8259A_lock); /* Perform an interrupt acknowledge cycle on controller 1. */ writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */ @@ -325,7 +325,7 @@ static inline int sni_rm200_i8259_irq(void) irq = -1; } - spin_unlock(&sni_rm200_i8259A_lock); + raw_spin_unlock(&sni_rm200_i8259A_lock); return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq; } @@ -334,7 +334,7 @@ void sni_rm200_init_8259A(void) { unsigned long flags; - spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); + raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); writeb(0xff, rm200_pic_master + PIC_IMR); writeb(0xff, rm200_pic_slave + PIC_IMR); @@ -352,7 +352,7 @@ void sni_rm200_init_8259A(void) writeb(cached_master_mask, rm200_pic_master + PIC_IMR); writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); - spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); + raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); } /* diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index e27809b6d04..7174d830dd0 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -399,11 +399,6 @@ const char *get_system_type(void) return txx9_system_type; } -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} - const char *__init prom_getenv(const char *name) { const s32 *str; diff --git a/arch/mips/txx9/jmr3927/setup.c b/arch/mips/txx9/jmr3927/setup.c index 25e50a7be38..3206f76f300 100644 --- a/arch/mips/txx9/jmr3927/setup.c +++ b/arch/mips/txx9/jmr3927/setup.c @@ -67,8 +67,6 @@ static void jmr3927_board_init(void); static void __init jmr3927_mem_setup(void) { - char *argptr; - set_io_port_base(JMR3927_PORT_BASE + JMR3927_PCIIO); _machine_restart = jmr3927_machine_restart; @@ -97,11 +95,6 @@ static void __init jmr3927_mem_setup(void) jmr3927_board_init(); tx3927_sio_init(0, 1 << 1); /* ch1: noCTS */ -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (!strstr(argptr, "console=")) - strcat(argptr, " console=ttyS1,115200"); -#endif } static void __init jmr3927_pci_setup(void) diff --git a/arch/mips/txx9/rbtx4927/setup.c b/arch/mips/txx9/rbtx4927/setup.c index ee468eaee4f..b15adfc2d72 100644 --- a/arch/mips/txx9/rbtx4927/setup.c +++ b/arch/mips/txx9/rbtx4927/setup.c @@ -187,8 +187,6 @@ static void __init rbtx4937_clock_init(void); static void __init rbtx4927_mem_setup(void) { - char *argptr; - if (TX4927_REV_PCODE() == 0x4927) { rbtx4927_clock_init(); tx4927_setup(); @@ -213,11 +211,6 @@ static void __init rbtx4927_mem_setup(void) gpio_direction_output(15, 1); tx4927_sio_init(0, 0); -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (!strstr(argptr, "console=")) - strcat(argptr, " console=ttyS0,38400"); -#endif } static void __init rbtx4927_clock_init(void) diff --git a/arch/mips/txx9/rbtx4938/setup.c b/arch/mips/txx9/rbtx4938/setup.c index d66509b1428..d6e70dab3bd 100644 --- a/arch/mips/txx9/rbtx4938/setup.c +++ b/arch/mips/txx9/rbtx4938/setup.c @@ -153,7 +153,6 @@ static void __init rbtx4938_time_init(void) static void __init rbtx4938_mem_setup(void) { unsigned long long pcfg; - char *argptr; if (txx9_master_clock == 0) txx9_master_clock = 25000000; /* 25MHz */ @@ -168,11 +167,6 @@ static void __init rbtx4938_mem_setup(void) #endif tx4938_sio_init(7372800, 0); -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (!strstr(argptr, "console=")) - strcat(argptr, " console=ttyS0,38400"); -#endif #ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 pr_info("PIOSEL: disabling both ATA and NAND selection\n"); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 50c9af43e01..155d571f5e2 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -58,7 +58,7 @@ config IRQ_PER_CPU config NR_IRQS int "Number of virtual interrupt numbers" - range 32 512 + range 32 32768 default "512" help This defines the number of virtual interrupt numbers the kernel @@ -241,6 +241,33 @@ config PPC_OF_PLATFORM_PCI config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y +config PPC_ADV_DEBUG_REGS + bool + depends on 40x || BOOKE + default y + +config PPC_ADV_DEBUG_IACS + int + depends on PPC_ADV_DEBUG_REGS + default 4 if 44x + default 2 + +config PPC_ADV_DEBUG_DACS + int + depends on PPC_ADV_DEBUG_REGS + default 2 + +config PPC_ADV_DEBUG_DVCS + int + depends on PPC_ADV_DEBUG_REGS + default 2 if 44x + default 0 + +config PPC_ADV_DEBUG_DAC_RANGE + bool + depends on PPC_ADV_DEBUG_REGS && 44x + default y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/powerpc/boot/dts/arches.dts b/arch/powerpc/boot/dts/arches.dts index 414ef8b7e57..30f41204acf 100644 --- a/arch/powerpc/boot/dts/arches.dts +++ b/arch/powerpc/boot/dts/arches.dts @@ -60,6 +60,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; + next-level-cache = <&L2C0>; }; }; @@ -146,6 +147,13 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; @@ -274,6 +282,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "sgmii"; phy-map = <0xffffffff>; gpcs-address = <0x0000000a>; @@ -302,6 +311,7 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; phy-mode = "sgmii"; phy-map = <0x00000000>; gpcs-address = <0x0000000b>; @@ -331,6 +341,8 @@ max-frame-size = <9000>; rx-fifo-size = <4096>; tx-fifo-size = <2048>; + rx-fifo-size-gige = <16384>; + tx-fifo-size-gige = <16384>; /* emac2&3 only */ phy-mode = "sgmii"; phy-map = <0x00000001>; gpcs-address = <0x0000000C>; diff --git a/arch/powerpc/boot/dts/gef_ppc9a.dts b/arch/powerpc/boot/dts/gef_ppc9a.dts index c86114e93f1..977f260d5e6 100644 --- a/arch/powerpc/boot/dts/gef_ppc9a.dts +++ b/arch/powerpc/boot/dts/gef_ppc9a.dts @@ -341,6 +341,22 @@ device_type = "open-pic"; }; + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; reg = <0xe0000 0x1000>; diff --git a/arch/powerpc/boot/dts/gef_sbc310.dts b/arch/powerpc/boot/dts/gef_sbc310.dts index 820c2b355ab..8e4efff3bda 100644 --- a/arch/powerpc/boot/dts/gef_sbc310.dts +++ b/arch/powerpc/boot/dts/gef_sbc310.dts @@ -32,6 +32,7 @@ serial0 = &serial0; serial1 = &serial1; pci0 = &pci0; + pci1 = &pci1; }; cpus { @@ -338,6 +339,22 @@ device_type = "open-pic"; }; + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; reg = <0xe0000 0x1000>; @@ -358,7 +375,7 @@ clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <0x18 0x2>; - interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map-mask = <0xff00 0x0 0x0 0x7>; interrupt-map = < 0x0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0000 0x0 0x0 0x2 &mpic 0x1 0x2 diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts index 30911adefc8..bb7060078fb 100644 --- a/arch/powerpc/boot/dts/gef_sbc610.dts +++ b/arch/powerpc/boot/dts/gef_sbc610.dts @@ -75,14 +75,48 @@ interrupts = <19 2>; interrupt-parent = <&mpic>; - ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash - 1 0 0xe8000000 0x08000000 // Paged Flash 0 - 2 0 0xe0000000 0x08000000 // Paged Flash 1 - 3 0 0xfc100000 0x00020000 // NVRAM - 4 0 0xfc000000 0x00008000 // FPGA - 5 0 0xfc008000 0x00008000 // AFIX FPGA - 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) - 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + ranges = <0 0 0xff000000 0x01000000 // 16MB Boot flash + 1 0 0xe8000000 0x08000000 // Paged Flash 0 + 2 0 0xe0000000 0x08000000 // Paged Flash 1 + 3 0 0xfc100000 0x00020000 // NVRAM + 4 0 0xfc000000 0x00008000 // FPGA + 5 0 0xfc008000 0x00008000 // AFIX FPGA + 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) + 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) + + /* flash@0,0 is a mirror of part of the memory in flash@1,0 + flash@0,0 { + compatible = "gef,sbc610-firmware-mirror", "cfi-flash"; + reg = <0x0 0x0 0x1000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "firmware"; + reg = <0x0 0x1000000>; + read-only; + }; + }; + */ + + flash@1,0 { + compatible = "gef,sbc610-paged-flash", "cfi-flash"; + reg = <0x1 0x0 0x8000000>; + bank-width = <4>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "user"; + reg = <0x0 0x7800000>; + }; + partition@7800000 { + label = "firmware"; + reg = <0x7800000 0x800000>; + read-only; + }; + }; nvram@3,0 { device_type = "nvram"; @@ -305,6 +339,22 @@ device_type = "open-pic"; }; + msi@41600 { + compatible = "fsl,mpc8641-msi", "fsl,mpic-msi"; + reg = <0x41600 0x80>; + msi-available-ranges = <0 0x100>; + interrupts = < + 0xe0 0 + 0xe1 0 + 0xe2 0 + 0xe3 0 + 0xe4 0 + 0xe5 0 + 0xe6 0 + 0xe7 0>; + interrupt-parent = <&mpic>; + }; + global-utilities@e0000 { compatible = "fsl,mpc8641-guts"; reg = <0xe0000 0x1000>; diff --git a/arch/powerpc/boot/dts/glacier.dts b/arch/powerpc/boot/dts/glacier.dts index f6f61893929..d62a4fb6f93 100644 --- a/arch/powerpc/boot/dts/glacier.dts +++ b/arch/powerpc/boot/dts/glacier.dts @@ -1,7 +1,7 @@ /* * Device Tree Source for AMCC Glacier (460GT) * - * Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de> + * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without @@ -42,6 +42,7 @@ d-cache-size = <32768>; dcr-controller; dcr-access-method = "native"; + next-level-cache = <&L2C0>; }; }; @@ -106,6 +107,16 @@ dcr-reg = <0x00c 0x002>; }; + L2C0: l2c { + compatible = "ibm,l2-cache-460gt", "ibm,l2-cache"; + dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */ + 0x030 0x008>; /* L2 cache DCR's */ + cache-line-size = <32>; /* 32 bytes */ + cache-size = <262144>; /* L2, 256K */ + interrupt-parent = <&UIC1>; + interrupts = <11 1>; + }; + plb { compatible = "ibm,plb-460gt", "ibm,plb4"; #address-cells = <2>; @@ -118,6 +129,13 @@ dcr-reg = <0x010 0x002>; }; + CRYPTO: crypto@180000 { + compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto"; + reg = <4 0x00180000 0x80400>; + interrupt-parent = <&UIC0>; + interrupts = <0x1d 0x4>; + }; + MAL0: mcmal { compatible = "ibm,mcmal-460gt", "ibm,mcmal2"; dcr-reg = <0x180 0x062>; @@ -186,6 +204,29 @@ reg = <0x03fa0000 0x00060000>; }; }; + + ndfc@3,0 { + compatible = "ibm,ndfc"; + reg = <0x00000003 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x00000000 0x00100000>; + }; + partition@100000 { + label = "user"; + reg = <0x00000000 0x03f00000>; + }; + }; + }; }; UART0: serial@ef600300 { @@ -237,6 +278,20 @@ reg = <0xef600700 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; + #address-cells = <1>; + #size-cells = <0>; + rtc@68 { + compatible = "stm,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC2>; + interrupts = <0x19 0x8>; + }; + sttm@48 { + compatible = "ad,ad7414"; + reg = <0x48>; + interrupt-parent = <&UIC1>; + interrupts = <0x14 0x8>; + }; }; IIC1: i2c@ef600800 { @@ -275,7 +330,7 @@ EMAC0: ethernet@ef600e00 { device_type = "network"; - compatible = "ibm,emac-460gt", "ibm,emac4"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; interrupt-parent = <&EMAC0>; interrupts = <0x0 0x1>; #interrupt-cells = <1>; @@ -283,7 +338,7 @@ #size-cells = <0>; interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4 /*Wake*/ 0x1 &UIC2 0x14 0x4>; - reg = <0xef600e00 0x00000074>; + reg = <0xef600e00 0x000000c4>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <0>; @@ -305,7 +360,7 @@ EMAC1: ethernet@ef600f00 { device_type = "network"; - compatible = "ibm,emac-460gt", "ibm,emac4"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; interrupt-parent = <&EMAC1>; interrupts = <0x0 0x1>; #interrupt-cells = <1>; @@ -313,7 +368,7 @@ #size-cells = <0>; interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4 /*Wake*/ 0x1 &UIC2 0x15 0x4>; - reg = <0xef600f00 0x00000074>; + reg = <0xef600f00 0x000000c4>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <1>; @@ -336,7 +391,7 @@ EMAC2: ethernet@ef601100 { device_type = "network"; - compatible = "ibm,emac-460gt", "ibm,emac4"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; interrupt-parent = <&EMAC2>; interrupts = <0x0 0x1>; #interrupt-cells = <1>; @@ -344,7 +399,7 @@ #size-cells = <0>; interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4 /*Wake*/ 0x1 &UIC2 0x16 0x4>; - reg = <0xef601100 0x00000074>; + reg = <0xef601100 0x000000c4>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <2>; @@ -366,7 +421,7 @@ EMAC3: ethernet@ef601200 { device_type = "network"; - compatible = "ibm,emac-460gt", "ibm,emac4"; + compatible = "ibm,emac-460gt", "ibm,emac4sync"; interrupt-parent = <&EMAC3>; interrupts = <0x0 0x1>; #interrupt-cells = <1>; @@ -374,7 +429,7 @@ #size-cells = <0>; interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4 /*Wake*/ 0x1 &UIC2 0x17 0x4>; - reg = <0xef601200 0x00000074>; + reg = <0xef601200 0x000000c4>; local-mac-address = [000000000000]; /* Filled in by U-Boot */ mal-device = <&MAL0>; mal-tx-channel = <3>; @@ -414,6 +469,7 @@ * later cannot be changed */ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ @@ -444,6 +500,7 @@ * later cannot be changed */ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ @@ -485,6 +542,7 @@ * later cannot be changed */ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000 + 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>; /* Inbound 2GB range starting at 0 */ diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 8f345de960c..8cf2c0c88c0 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -156,7 +156,7 @@ compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; #address-cells = <1>; #size-cells = <1>; - ranges = <0x00000000 0x00000004 0xe0000000 0x20000000>; + ranges = <0xe0000000 0x00000004 0xe0000000 0x20000000>; clock-frequency = <0>; /* Filled in by zImage */ EBC0: ebc { @@ -165,14 +165,47 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ + /* ranges property is supplied by U-Boot */ interrupts = <0x5 0x1>; interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "cfi-flash"; + bank-width = <2>; + reg = <0x00000000 0x00000000 0x01000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0x00000000 0x001e0000>; + }; + partition@1e0000 { + label = "dtb"; + reg = <0x001e0000 0x00020000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x00200000>; + }; + partition@400000 { + label = "user"; + reg = <0x00400000 0x00b60000>; + }; + partition@f60000 { + label = "env"; + reg = <0x00f60000 0x00040000>; + }; + partition@fa0000 { + label = "u-boot"; + reg = <0x00fa0000 0x00060000>; + }; + }; }; - UART0: serial@10000200 { + UART0: serial@f0000200 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000200 0x00000008>; + reg = <0xf0000200 0x00000008>; virtual-reg = <0xa0000200>; clock-frequency = <0>; /* Filled in by zImage */ current-speed = <115200>; @@ -180,10 +213,10 @@ interrupts = <0x0 0x4>; }; - UART1: serial@10000300 { + UART1: serial@f0000300 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000300 0x00000008>; + reg = <0xf0000300 0x00000008>; virtual-reg = <0xa0000300>; clock-frequency = <0>; current-speed = <0>; @@ -192,10 +225,10 @@ }; - UART2: serial@10000600 { + UART2: serial@f0000600 { device_type = "serial"; compatible = "ns16550"; - reg = <0x10000600 0x00000008>; + reg = <0xf0000600 0x00000008>; virtual-reg = <0xa0000600>; clock-frequency = <0>; current-speed = <0>; @@ -203,27 +236,27 @@ interrupts = <0x5 0x4>; }; - IIC0: i2c@10000400 { + IIC0: i2c@f0000400 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0x10000400 0x00000014>; + reg = <0xf0000400 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x2 0x4>; }; - IIC1: i2c@10000500 { + IIC1: i2c@f0000500 { compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; - reg = <0x10000500 0x00000014>; + reg = <0xf0000500 0x00000014>; interrupt-parent = <&UIC0>; interrupts = <0x3 0x4>; }; - EMAC0: ethernet@10000800 { + EMAC0: ethernet@f0000800 { linux,network-index = <0x0>; device_type = "network"; compatible = "ibm,emac-440spe", "ibm,emac4"; interrupt-parent = <&UIC1>; interrupts = <0x1c 0x4 0x1d 0x4>; - reg = <0x10000800 0x00000074>; + reg = <0xf0000800 0x00000074>; local-mac-address = [000000000000]; mal-device = <&MAL0>; mal-tx-channel = <0>; @@ -248,11 +281,11 @@ primary; large-inbound-windows; enable-msi-hole; - reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ - 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ - 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ - 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ - 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ + reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */ + 0x00000000 0x00000000 0x00000000 /* no IACK cycles */ + 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */ + 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */ + 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */ /* Outbound ranges, one memory and one IO, * later cannot be changed @@ -453,6 +486,6 @@ }; chosen { - linux,stdout-path = "/plb/opb/serial@10000200"; + linux,stdout-path = "/plb/opb/serial@f0000200"; }; }; diff --git a/arch/powerpc/boot/dts/mpc5121ads.dts b/arch/powerpc/boot/dts/mpc5121ads.dts index c353dac3341..c9ef6bbe26c 100644 --- a/arch/powerpc/boot/dts/mpc5121ads.dts +++ b/arch/powerpc/boot/dts/mpc5121ads.dts @@ -62,17 +62,12 @@ interrupt-parent = < &ipic >; #address-cells = <1>; #size-cells = <1>; - bank-width = <1>; // ADS has two Hynix 512MB Nand flash chips in a single - // stacked package . + // stacked package. chips = <2>; - nand0@0 { - label = "nand0"; - reg = <0x00000000 0x02000000>; // first 32 MB of chip 0 - }; - nand1@20000000 { - label = "nand1"; - reg = <0x20000000 0x02000000>; // first 32 MB of chip 1 + nand@0 { + label = "nand"; + reg = <0x00000000 0x40000000>; // 512MB + 512MB }; }; @@ -166,6 +161,11 @@ interrupt-parent = < &ipic >; }; + reset@e00 { // Reset module + compatible = "fsl,mpc5121-reset"; + reg = <0xe00 0x100>; + }; + clock@f00 { // Clock control compatible = "fsl,mpc5121-clock"; reg = <0xf00 0x100>; @@ -185,17 +185,15 @@ interrupt-parent = < &ipic >; }; - mscan@1300 { + can@1300 { compatible = "fsl,mpc5121-mscan"; - cell-index = <0>; interrupts = <12 0x8>; interrupt-parent = < &ipic >; reg = <0x1300 0x80>; }; - mscan@1380 { + can@1380 { compatible = "fsl,mpc5121-mscan"; - cell-index = <1>; interrupts = <13 0x8>; interrupt-parent = < &ipic >; reg = <0x1380 0x80>; @@ -205,17 +203,31 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <0>; reg = <0x1700 0x20>; interrupts = <9 0x8>; interrupt-parent = < &ipic >; + fsl,preserve-clocking; + + hwmon@4a { + compatible = "adi,ad7414"; + reg = <0x4a>; + }; + + eeprom@50 { + compatible = "at,24c32"; + reg = <0x50>; + }; + + rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; }; i2c@1720 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <1>; reg = <0x1720 0x20>; interrupts = <10 0x8>; interrupt-parent = < &ipic >; @@ -225,7 +237,6 @@ #address-cells = <1>; #size-cells = <0>; compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - cell-index = <2>; reg = <0x1740 0x20>; interrupts = <11 0x8>; interrupt-parent = < &ipic >; @@ -244,7 +255,7 @@ }; display@2100 { - compatible = "fsl,mpc5121-diu", "fsl-diu"; + compatible = "fsl,mpc5121-diu"; reg = <0x2100 0x100>; interrupts = <64 0x8>; interrupt-parent = < &ipic >; @@ -277,7 +288,7 @@ // USB1 using external ULPI PHY //usb@3000 { - // compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + // compatible = "fsl,mpc5121-usb2-dr"; // reg = <0x3000 0x1000>; // #address-cells = <1>; // #size-cells = <0>; @@ -285,12 +296,11 @@ // interrupts = <43 0x8>; // dr_mode = "otg"; // phy_type = "ulpi"; - // port1; //}; // USB0 using internal UTMI PHY usb@4000 { - compatible = "fsl,mpc5121-usb2-dr", "fsl-usb2-dr"; + compatible = "fsl,mpc5121-usb2-dr"; reg = <0x4000 0x1000>; #address-cells = <1>; #size-cells = <0>; @@ -298,7 +308,8 @@ interrupts = <44 0x8>; dr_mode = "otg"; phy_type = "utmi_wide"; - port0; + fsl,invert-drvvbus; + fsl,invert-pwr-fault; }; // IO control @@ -365,7 +376,7 @@ }; dma@14000 { - compatible = "fsl,mpc5121-dma2"; + compatible = "fsl,mpc5121-dma"; reg = <0x14000 0x1800>; interrupts = <65 0x8>; interrupt-parent = < &ipic >; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index 6d892ba74e5..92fb17876e7 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -54,9 +54,52 @@ reg = <0x0 0x10000000>; }; - bcsr@f8000000 { - compatible = "fsl,mpc8568mds-bcsr"; - reg = <0xf8000000 0x8000>; + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8568-localbus", "fsl,pq3-localbus", + "simple-bus"; + reg = <0xe0005000 0x1000>; + + ranges = <0x0 0x0 0xfe000000 0x02000000 + 0x1 0x0 0xf8000000 0x00008000 + 0x2 0x0 0xf0000000 0x04000000 + 0x4 0x0 0xf8008000 0x00008000 + 0x5 0x0 0xf8010000 0x00008000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x02000000>; + bank-width = <2>; + device-width = <2>; + }; + + bcsr@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8568mds-bcsr"; + reg = <1 0 0x8000>; + ranges = <0 1 0 0x8000>; + + bcsr5: gpio-controller@11 { + #gpio-cells = <2>; + compatible = "fsl,mpc8568mds-bcsr-gpio"; + reg = <0x5 0x1>; + gpio-controller; + }; + }; + + pib@4,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <4 0 0x8000>; + }; + + pib@5,0 { + compatible = "fsl,mpc8568mds-pib"; + reg = <5 0 0x8000>; + }; }; soc8568@e0000000 { @@ -610,4 +653,20 @@ sleep = <&pmc 0x00080000 /* controller */ &pmc 0x00040000>; /* message unit */ }; + + leds { + compatible = "gpio-leds"; + + green { + gpios = <&bcsr5 1 0>; + }; + + amber { + gpios = <&bcsr5 2 0>; + }; + + red { + gpios = <&bcsr5 3 0>; + }; + }; }; diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index dec901f9cc8..af244e1d255 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc1 -# Mon Jan 4 14:55:34 2010 +# Linux kernel version: 2.6.33-rc5 +# Tue Jan 26 14:40:58 2010 # # CONFIG_PPC64 is not set @@ -106,6 +106,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y # CONFIG_RD_BZIP2 is not set # CONFIG_RD_LZMA is not set +# CONFIG_RD_LZO is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -442,7 +443,90 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -500,7 +584,7 @@ CONFIG_HAVE_IDE=y # # -# See the help texts for more information. +# The newer stack is recommended. # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set @@ -763,7 +847,6 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4_FS is not set -CONFIG_EXT4_USE_FOR_EXT23=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set @@ -820,6 +903,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig index a85f927bf22..622d84f48ab 100644 --- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig +++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig @@ -1557,7 +1557,52 @@ CONFIG_RTC_DRV_RX8581=y # # TI VLYNQ # -# CONFIG_STAGING is not set +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_ME4000 is not set +# CONFIG_MEILHAUS is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_HECI is not set +# CONFIG_USB_CPC is not set + +# +# Qualcomm MSM Camera And Video +# + +# +# Camera Sensor Selection +# +# CONFIG_HYPERV_STORAGE is not set +# CONFIG_HYPERV_BLOCK is not set +# CONFIG_HYPERV_NET is not set +CONFIG_VME_BUS=y + +# +# VME Bridge Drivers +# +CONFIG_VME_TSI148=y + +# +# VME Device Drivers +# +# CONFIG_VME_USER is not set # # File systems diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 4554d9bb03e..62c2b81a4a8 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -265,7 +265,7 @@ CONFIG_MMIO_NVRAM=y # # Kernel options # -# CONFIG_HIGHMEM is not set +CONFIG_HIGHMEM=y CONFIG_TICK_ONESHOT=y # CONFIG_NO_HZ is not set CONFIG_HIGH_RES_TIMERS=y @@ -651,7 +651,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_OF_PARTS is not set +CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set # @@ -671,13 +671,9 @@ CONFIG_MTD_BLOCK=y # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_NOSWAP is not set -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -CONFIG_MTD_CFI_LE_BYTE_SWAP=y -# CONFIG_MTD_CFI_GEOMETRY is not set +# CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y @@ -688,7 +684,6 @@ CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set @@ -1652,7 +1647,44 @@ CONFIG_RTC_DRV_RX8581=y # # TI VLYNQ # -# CONFIG_STAGING is not set +CONFIG_STAGING=y +# CONFIG_STAGING_EXCLUDE_BUILD is not set +# CONFIG_ET131X is not set +# CONFIG_ME4000 is not set +# CONFIG_MEILHAUS is not set +# CONFIG_USB_IP_COMMON is not set +# CONFIG_ECHO is not set +# CONFIG_COMEDI is not set +# CONFIG_ASUS_OLED is not set +# CONFIG_ALTERA_PCIE_CHDMA is not set +# CONFIG_INPUT_MIMIO is not set +# CONFIG_TRANZPORT is not set + +# +# Android +# +# CONFIG_ANDROID is not set +# CONFIG_DST is not set +# CONFIG_POHMELFS is not set +# CONFIG_B3DFG is not set +# CONFIG_IDE_PHISON is not set +# CONFIG_PLAN9AUTH is not set +# CONFIG_HECI is not set +# CONFIG_VT6655 is not set +# CONFIG_USB_CPC is not set +# CONFIG_RDC_17F3101X is not set +CONFIG_VME_BUS=y + +# +# VME Bridge Drivers +# +# CONFIG_VME_CA91CX42 is not set +CONFIG_VME_TSI148=y + +# +# VME Device Drivers +# +# CONFIG_VME_USER is not set # # File systems @@ -1729,7 +1761,17 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -1874,6 +1916,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set diff --git a/arch/powerpc/configs/mpc512x_defconfig b/arch/powerpc/configs/mpc512x_defconfig new file mode 100644 index 00000000000..a04727295d4 --- /dev/null +++ b/arch/powerpc/configs/mpc512x_defconfig @@ -0,0 +1,1694 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.33-rc6 +# Fri Feb 5 11:48:29 2010 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +CONFIG_PPC_BOOK3S_32=y +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_PPC_BOOK3S=y +CONFIG_6xx=y +CONFIG_PPC_FPU=y +# CONFIG_ALTIVEC is not set +CONFIG_PPC_STD_MMU=y +CONFIG_PPC_STD_MMU_32=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_PPC_HAVE_PMU_SUPPORT=y +# CONFIG_SMP is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +# CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_NR_IRQS=512 +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +# CONFIG_PPC_UDBG_16550 is not set +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +CONFIG_DTC=y +CONFIG_DEFAULT_UIMAGE=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +# CONFIG_PPC_DCR_NATIVE is not set +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +CONFIG_CONSTRUCTORS=y + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_NET_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_RD_GZIP=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y +# CONFIG_EMBEDDED is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y + +# +# Kernel Performance Events And Counters +# +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set +CONFIG_VM_EVENT_COUNTERS=y +# CONFIG_COMPAT_BRK is not set +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_DMA_API_DEBUG=y + +# +# GCOV-based kernel profiling +# +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_BLOCK=y +CONFIG_LBDAF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +CONFIG_INLINE_SPIN_UNLOCK=y +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +CONFIG_INLINE_READ_UNLOCK=y +# CONFIG_INLINE_READ_UNLOCK_BH is not set +CONFIG_INLINE_READ_UNLOCK_IRQ=y +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +CONFIG_INLINE_WRITE_UNLOCK=y +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set +# CONFIG_FREEZER is not set + +# +# Platform support +# +# CONFIG_PPC_CHRP is not set +CONFIG_PPC_MPC512x=y +CONFIG_PPC_MPC5121=y +CONFIG_MPC5121_ADS=y +# CONFIG_MPC5121_GENERIC is not set +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_PMAC is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PPC_82xx is not set +# CONFIG_PQ2ADS is not set +# CONFIG_PPC_83xx is not set +# CONFIG_PPC_86xx is not set +# CONFIG_EMBEDDED6xx is not set +# CONFIG_AMIGAONE is not set +CONFIG_PPC_OF_BOOT_TRAMPOLINE=y +CONFIG_IPIC=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_TAU is not set +# CONFIG_QUICC_ENGINE is not set +# CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +# CONFIG_IOMMU_HELPER is not set +# CONFIG_SWIOTLB is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_SPARSE_IRQ=y +CONFIG_MAX_ACTIVE_REGIONS=32 +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_MIGRATION is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +# CONFIG_KSM is not set +CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set +# CONFIG_PPC_256K_PAGES is not set +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +# CONFIG_SECCOMP is not set +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_FSL_SOC=y +CONFIG_PPC_PCI_CHOICE=y +# CONFIG_PCI is not set +# CONFIG_PCI_DOMAINS is not set +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_RDS is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_IEEE802154 is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y + +# +# CAN Device Drivers +# +CONFIG_CAN_VCAN=y +CONFIG_CAN_DEV=y +# CONFIG_CAN_CALC_BITTIMING is not set +CONFIG_CAN_MSCAN=y +# CONFIG_CAN_SJA1000 is not set + +# +# CAN USB interfaces +# +# CONFIG_CAN_EMS_USB is not set +CONFIG_CAN_DEBUG_DEVICES=y +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set +CONFIG_STANDALONE=y +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set +# CONFIG_MTD_NAND_FSL_ELBC is not set +CONFIG_MTD_NAND_MPC5121_NFC=y +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set +CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y +CONFIG_OF_MDIO=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=1 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_XIP=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set +# CONFIG_ICS932S401 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_ISL29003 is not set +# CONFIG_DS1682 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_MAX6875 is not set +# CONFIG_EEPROM_93CX6 is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=y +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +CONFIG_CHR_DEV_SG=y +# CONFIG_CHR_DEV_SCH is not set +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m + +# +# SCSI Transports +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y +# CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +CONFIG_DAVICOM_PHY=y +CONFIG_QSEMI_PHY=y +CONFIG_LXT_PHY=y +CONFIG_CICADA_PHY=y +CONFIG_VITESSE_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_BROADCOM_PHY=y +CONFIG_ICPLUS_PHY=y +CONFIG_REALTEK_PHY=y +CONFIG_NATIONAL_PHY=y +CONFIG_STE10XP=y +CONFIG_LSI_ET1011C_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MDIO_BITBANG=y +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +# CONFIG_KS8842 is not set +# CONFIG_KS8851_MLL is not set +# CONFIG_XILINX_EMACLITE is not set +CONFIG_FS_ENET=y +CONFIG_FS_ENET_MPC5121_FEC=y +CONFIG_FS_ENET_HAS_FEC=y +CONFIG_FS_ENET_MDIO_FEC=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_QT2160 is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_MAX7359 is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_SYNAPTICS_I2C is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_I8042=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_XILINX_XPS_PS2 is not set +# CONFIG_SERIO_ALTERA_PS2 is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_SERIAL_MPC52xx=y +CONFIG_SERIAL_MPC52xx_CONSOLE=y +CONFIG_SERIAL_MPC52xx_CONSOLE_BAUD=115200 +# CONFIG_SERIAL_GRLIB_GAISLER_APBUART is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +CONFIG_I2C_MPC=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_AB3100_CORE is not set +# CONFIG_MFD_88PM8607 is not set +# CONFIG_REGULATOR is not set +CONFIG_MEDIA_SUPPORT=y + +# +# Multimedia core support +# +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=y + +# +# Multimedia drivers +# +CONFIG_IR_CORE=y +CONFIG_VIDEO_IR=y +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMISE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_MEDIA_TUNER_MC44S803=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +CONFIG_VIDEO_ADV_DEBUG=y +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set +CONFIG_VIDEO_IR_I2C=y + +# +# Encoders/decoders and other helper chips +# + +# +# Audio decoders +# +# CONFIG_VIDEO_TVAUDIO is not set +# CONFIG_VIDEO_TDA7432 is not set +# CONFIG_VIDEO_TDA9840 is not set +# CONFIG_VIDEO_TDA9875 is not set +# CONFIG_VIDEO_TEA6415C is not set +# CONFIG_VIDEO_TEA6420 is not set +# CONFIG_VIDEO_MSP3400 is not set +# CONFIG_VIDEO_CS5345 is not set +# CONFIG_VIDEO_CS53L32A is not set +# CONFIG_VIDEO_M52790 is not set +# CONFIG_VIDEO_TLV320AIC23B is not set +# CONFIG_VIDEO_WM8775 is not set +# CONFIG_VIDEO_WM8739 is not set +# CONFIG_VIDEO_VP27SMPX is not set + +# +# RDS decoders +# +# CONFIG_VIDEO_SAA6588 is not set + +# +# Video decoders +# +# CONFIG_VIDEO_ADV7180 is not set +# CONFIG_VIDEO_BT819 is not set +# CONFIG_VIDEO_BT856 is not set +# CONFIG_VIDEO_BT866 is not set +# CONFIG_VIDEO_KS0127 is not set +# CONFIG_VIDEO_OV7670 is not set +# CONFIG_VIDEO_MT9V011 is not set +# CONFIG_VIDEO_TCM825X is not set +# CONFIG_VIDEO_SAA7110 is not set +CONFIG_VIDEO_SAA711X=y +# CONFIG_VIDEO_SAA717X is not set +# CONFIG_VIDEO_TVP514X is not set +# CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_VPX3220 is not set + +# +# Video and audio decoders +# +# CONFIG_VIDEO_CX25840 is not set + +# +# MPEG video encoders +# +# CONFIG_VIDEO_CX2341X is not set + +# +# Video encoders +# +# CONFIG_VIDEO_SAA7127 is not set +# CONFIG_VIDEO_SAA7185 is not set +# CONFIG_VIDEO_ADV7170 is not set +# CONFIG_VIDEO_ADV7175 is not set +# CONFIG_VIDEO_THS7303 is not set +# CONFIG_VIDEO_ADV7343 is not set + +# +# Video improvement chips +# +# CONFIG_VIDEO_UPD64031A is not set +# CONFIG_VIDEO_UPD64083 is not set +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set +# CONFIG_USB_GL860 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_JEILINJ is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_MR97310A is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7302 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SN9C20X is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_SQ905 is not set +# CONFIG_USB_GSPCA_SQ905C is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_STV0680 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set +# CONFIG_VIDEO_HDPVR is not set +# CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_CX231XX is not set +# CONFIG_VIDEO_USBVISION is not set +# CONFIG_USB_ET61X251 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_ZC0301 is not set +CONFIG_USB_PWC_INPUT_EVDEV=y +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +# CONFIG_I2C_SI4713 is not set +# CONFIG_RADIO_SI4713 is not set +# CONFIG_USB_DSBR is not set +# CONFIG_RADIO_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set +# CONFIG_RADIO_TEF6862 is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_OF is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_FSL_DIU=y +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DRAGONRISE=y +# CONFIG_DRAGONRISE_FF is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +CONFIG_HID_GYRATION=y +CONFIG_HID_TWINHAN=y +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_HID_GREENASIA=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_SMARTJOYPLUS=y +# CONFIG_SMARTJOYPLUS_FF is not set +CONFIG_HID_TOPSEED=y +CONFIG_HID_THRUSTMASTER=y +# CONFIG_THRUSTMASTER_FF is not set +CONFIG_HID_ZEROPLUS=y +# CONFIG_ZEROPLUS_FF is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y +# CONFIG_XPS_USB_HCD_XILINX is not set +CONFIG_USB_EHCI_FSL=y +CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_EDAC is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +CONFIG_RTC_DRV_M41T80=y +# CONFIG_RTC_DRV_M41T80_WDT is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_GENERIC is not set +CONFIG_RTC_DRV_MPC5121=y +CONFIG_DMADEVICES=y + +# +# DMA Devices +# +# CONFIG_FSL_DMA is not set +CONFIG_MPC512X_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set +# CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set + +# +# TI VLYNQ +# +# CONFIG_STAGING is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT2_FS_XIP=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_XIP=y +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set +CONFIG_FILE_LOCKING=y +CONFIG_FSNOTIFY=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +# CONFIG_MSDOS_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_XATTR is not set +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +# CONFIG_UBIFS_FS_DEBUG is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set +# CONFIG_EFI_PARTITION is not set +# CONFIG_SYSV68_PARTITION is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +CONFIG_CRC16=y +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_DECOMPRESS_GZIP=y +CONFIG_DECOMPRESS_BZIP2=y +CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y +CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_STRIP_ASM_SYMS is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_TRACING_SUPPORT=y +# CONFIG_FTRACE is not set +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_PPC_DISABLE_WERROR is not set +CONFIG_PPC_WERROR=y +CONFIG_PRINT_STACK_DEPTH=64 +# CONFIG_IRQSTACKS is not set +# CONFIG_BOOTX_TEXT is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_VMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_GHASH is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +# CONFIG_CRYPTO_ZLIB is not set +CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +# CONFIG_CRYPTO_HW is not set +CONFIG_PPC_CLOCK=y +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 7b3804a6e36..b5b25996079 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -137,8 +137,9 @@ CONFIG_TRACEPOINTS=y CONFIG_MARKERS=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set +CONFIG_KPROBES=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_KRETPROBES=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y @@ -191,6 +192,7 @@ CONFIG_SCANLOG=m CONFIG_LPARCFG=y CONFIG_PPC_SMLPAR=y CONFIG_CMM=y +CONFIG_DTL=y CONFIG_PPC_ISERIES=y # @@ -328,9 +330,10 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_KEXEC=y # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y -# CONFIG_NUMA is not set +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=8 +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -339,6 +342,7 @@ CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y @@ -354,11 +358,12 @@ CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_NODES_SPAN_OTHER_NODES=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_PPC_HAS_HASH_64K=y # CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=13 -# CONFIG_SCHED_SMT is not set +CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set CONFIG_EXTRA_TARGETS="" @@ -790,12 +795,12 @@ CONFIG_SCSI_IPR=y CONFIG_SCSI_IPR_TRACE=y CONFIG_SCSI_IPR_DUMP=y # CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set +CONFIG_SCSI_QLA_FC=m # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=m # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set -CONFIG_SCSI_DEBUG=m +# CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set @@ -867,9 +872,8 @@ CONFIG_MD_AUTODETECT=y CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_RAID456=y -CONFIG_MD_RAID5_RESHAPE=y +CONFIG_MD_RAID10=m +CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -984,7 +988,7 @@ CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000E is not set +CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -1006,19 +1010,19 @@ CONFIG_GELIC_WIRELESS=y # CONFIG_ATL1E is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T3=m CONFIG_EHEA=m # CONFIG_ENIC is not set -# CONFIG_IXGBE is not set +CONFIG_IXGBE=m CONFIG_IXGB=m -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set +CONFIG_S2IO=m +CONFIG_MYRI10GE=m +CONFIG_NETXEN_NIC=m # CONFIG_NIU is not set CONFIG_PASEMI_MAC=y -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_QLGE is not set @@ -1169,7 +1173,7 @@ CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y CONFIG_SERIAL_TXX9_NR_UARTS=6 CONFIG_SERIAL_TXX9_CONSOLE=y -# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_JSM=m # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -1586,7 +1590,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -1686,21 +1690,22 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_INFINIBAND=m -# CONFIG_INFINIBAND_USER_MAD is not set -# CONFIG_INFINIBAND_USER_ACCESS is not set +CONFIG_INFINIBAND_USER_MAD=m +CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y -# CONFIG_INFINIBAND_IPATH is not set +CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_EHCA=m # CONFIG_INFINIBAND_AMSO1100 is not set -# CONFIG_MLX4_INFINIBAND is not set +CONFIG_MLX4_INFINIBAND=m # CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -# CONFIG_INFINIBAND_SRP is not set +CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_ISER=m CONFIG_EDAC=y @@ -1798,7 +1803,7 @@ CONFIG_REISERFS_FS=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=y +CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set @@ -1811,14 +1816,22 @@ CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set +CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m +CONFIG_OCFS2_FS_STATS=y +CONFIG_OCFS2_DEBUG_MASKLOG=y +# CONFIG_OCFS2_DEBUG_FS is not set +# CONFIG_OCFS2_COMPAT_JBD is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m -# CONFIG_FUSE_FS is not set +CONFIG_FUSE_FS=m # # CD-ROM/DVD Filesystems @@ -1851,7 +1864,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -# CONFIG_CONFIGFS_FS is not set +CONFIG_CONFIGFS_FS=m # # Miscellaneous filesystems @@ -2075,7 +2088,7 @@ CONFIG_XMON=y CONFIG_XMON_DISASSEMBLY=y CONFIG_DEBUGGER=y CONFIG_IRQSTACKS=y -# CONFIG_VIRQ_DEBUG is not set +CONFIG_VIRQ_DEBUG=y CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index ca9ff9aad74..41de3ddc9f2 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -159,7 +159,7 @@ CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y -# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_IO_TRACE=y CONFIG_BLK_DEV_BSG=y # CONFIG_BLK_DEV_INTEGRITY is not set CONFIG_BLOCK_COMPAT=y @@ -191,6 +191,7 @@ CONFIG_SCANLOG=m CONFIG_LPARCFG=y CONFIG_PPC_SMLPAR=y CONFIG_CMM=y +CONFIG_DTL=y # CONFIG_PPC_ISERIES is not set # CONFIG_PPC_PMAC is not set # CONFIG_PPC_MAPLE is not set @@ -255,7 +256,8 @@ CONFIG_KEXEC=y # CONFIG_PHYP_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_NUMA=y -CONFIG_NODES_SHIFT=4 +CONFIG_NODES_SHIFT=8 +CONFIG_MAX_ACTIVE_REGIONS=256 CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y @@ -270,7 +272,9 @@ CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y -# CONFIG_MEMORY_HOTPLUG is not set +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y @@ -705,7 +709,7 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y CONFIG_MD_RAID10=m -# CONFIG_MD_RAID456 is not set +CONFIG_MD_RAID456=m CONFIG_MD_MULTIPATH=m CONFIG_MD_FAULTY=m CONFIG_BLK_DEV_DM=y @@ -800,7 +804,7 @@ CONFIG_ACENIC=m CONFIG_ACENIC_OMIT_TIGON_I=y # CONFIG_DL2K is not set CONFIG_E1000=y -# CONFIG_E1000E is not set +CONFIG_E1000E=m # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set @@ -818,18 +822,18 @@ CONFIG_TIGON3=y # CONFIG_ATL1E is not set # CONFIG_JME is not set CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set +CONFIG_CHELSIO_T1=m +CONFIG_CHELSIO_T3=m CONFIG_EHEA=y # CONFIG_ENIC is not set -# CONFIG_IXGBE is not set +CONFIG_IXGBE=m CONFIG_IXGB=m CONFIG_S2IO=m -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set +CONFIG_MYRI10GE=m +CONFIG_NETXEN_NIC=m # CONFIG_NIU is not set -# CONFIG_MLX4_EN is not set -# CONFIG_MLX4_CORE is not set +CONFIG_MLX4_EN=m +CONFIG_MLX4_CORE=m # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set # CONFIG_QLGE is not set @@ -894,7 +898,7 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set # @@ -1271,7 +1275,7 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set -CONFIG_USB_MON=y +CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -1311,7 +1315,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=y +CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set @@ -1322,7 +1326,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set -CONFIG_USB_STORAGE_ONETOUCH=y +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1377,17 +1381,17 @@ CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y -# CONFIG_INFINIBAND_IPATH is not set +CONFIG_INFINIBAND_IPATH=m CONFIG_INFINIBAND_EHCA=m # CONFIG_INFINIBAND_AMSO1100 is not set -# CONFIG_MLX4_INFINIBAND is not set +CONFIG_MLX4_INFINIBAND=m # CONFIG_INFINIBAND_NES is not set CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m -# CONFIG_INFINIBAND_ISER is not set +CONFIG_INFINIBAND_ISER=m # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set @@ -1443,6 +1447,9 @@ CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set # CONFIG_OCFS2_COMPAT_JBD is not set +CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS_POSIX_ACL=y +CONFIG_NILFS2_FS=m CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1455,8 +1462,8 @@ CONFIG_FUSE_FS=m # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_JOLIET is not set +# CONFIG_ZISOFS is not set CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1508,14 +1515,14 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -CONFIG_NFSD=y +CONFIG_NFSD=m CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y +CONFIG_EXPORTFS=m CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y @@ -1681,12 +1688,12 @@ CONFIG_DYNAMIC_PRINTK_DEBUG=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set CONFIG_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_HCALL_STATS is not set -# CONFIG_CODE_PATCHING_SELFTEST is not set -# CONFIG_FTR_FIXUP_SELFTEST is not set -# CONFIG_MSI_BITMAP_SELFTEST is not set +CONFIG_CODE_PATCHING_SELFTEST=y +CONFIG_FTR_FIXUP_SELFTEST=y +CONFIG_MSI_BITMAP_SELFTEST=y CONFIG_XMON=y CONFIG_XMON_DEFAULT=y CONFIG_XMON_DISASSEMBLY=y diff --git a/arch/powerpc/include/asm/asm-compat.h b/arch/powerpc/include/asm/asm-compat.h index 8f0fe797194..c1b475a941e 100644 --- a/arch/powerpc/include/asm/asm-compat.h +++ b/arch/powerpc/include/asm/asm-compat.h @@ -2,6 +2,7 @@ #define _ASM_POWERPC_ASM_COMPAT_H #include <asm/types.h> +#include <asm/ppc-opcode.h> #ifdef __ASSEMBLY__ # define stringify_in_c(...) __VA_ARGS__ @@ -24,7 +25,7 @@ #define PPC_LONG stringify_in_c(.llong) #define PPC_LONG_ALIGN stringify_in_c(.balign 8) #define PPC_TLNEI stringify_in_c(tdnei) -#define PPC_LLARX stringify_in_c(ldarx) +#define PPC_LLARX(t, a, b, eh) PPC_LDARX(t, a, b, eh) #define PPC_STLCX stringify_in_c(stdcx.) #define PPC_CNTLZL stringify_in_c(cntlzd) @@ -46,7 +47,7 @@ #define PPC_LONG stringify_in_c(.long) #define PPC_LONG_ALIGN stringify_in_c(.balign 4) #define PPC_TLNEI stringify_in_c(twnei) -#define PPC_LLARX stringify_in_c(lwarx) +#define PPC_LLARX(t, a, b, eh) PPC_LWARX(t, a, b, eh) #define PPC_STLCX stringify_in_c(stwcx.) #define PPC_CNTLZL stringify_in_c(cntlzw) #define PPC_MTOCRF stringify_in_c(mtcrf) diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h index 4012483b189..b8f152ece02 100644 --- a/arch/powerpc/include/asm/atomic.h +++ b/arch/powerpc/include/asm/atomic.h @@ -49,13 +49,13 @@ static __inline__ int atomic_add_return(int a, atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%2 # atomic_add_return\n\ add %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -85,13 +85,13 @@ static __inline__ int atomic_sub_return(int a, atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%2 # atomic_sub_return\n\ subf %0,%1,%0\n" PPC405_ERR77(0,%2) " stwcx. %0,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -119,13 +119,13 @@ static __inline__ int atomic_inc_return(atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1 # atomic_inc_return\n\ addic %0,%0,1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -163,13 +163,13 @@ static __inline__ int atomic_dec_return(atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1 # atomic_dec_return\n\ addic %0,%0,-1\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -194,7 +194,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) int t; __asm__ __volatile__ ( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1 # atomic_add_unless\n\ cmpw 0,%0,%3 \n\ beq- 2f \n\ @@ -202,7 +202,7 @@ static __inline__ int atomic_add_unless(atomic_t *v, int a, int u) PPC405_ERR77(0,%2) " stwcx. %0,0,%1 \n\ bne- 1b \n" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) @@ -227,7 +227,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1 # atomic_dec_if_positive\n\ cmpwi %0,1\n\ addi %0,%0,-1\n\ @@ -235,7 +235,7 @@ static __inline__ int atomic_dec_if_positive(atomic_t *v) PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "\n\ 2:" : "=&b" (t) : "r" (&v->counter) @@ -286,12 +286,12 @@ static __inline__ long atomic64_add_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%2 # atomic64_add_return\n\ add %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -320,12 +320,12 @@ static __inline__ long atomic64_sub_return(long a, atomic64_t *v) long t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%2 # atomic64_sub_return\n\ subf %0,%1,%0\n\ stdcx. %0,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (a), "r" (&v->counter) : "cc", "memory"); @@ -352,12 +352,12 @@ static __inline__ long atomic64_inc_return(atomic64_t *v) long t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%1 # atomic64_inc_return\n\ addic %0,%0,1\n\ stdcx. %0,0,%1 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -394,12 +394,12 @@ static __inline__ long atomic64_dec_return(atomic64_t *v) long t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_return\n\ addic %0,%0,-1\n\ stdcx. %0,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "xer", "memory"); @@ -419,13 +419,13 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v) long t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%1 # atomic64_dec_if_positive\n\ addic. %0,%0,-1\n\ blt- 2f\n\ stdcx. %0,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "\n\ 2:" : "=&r" (t) : "r" (&v->counter) @@ -451,14 +451,14 @@ static __inline__ int atomic64_add_unless(atomic64_t *v, long a, long u) long t; __asm__ __volatile__ ( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%1 # atomic_add_unless\n\ cmpd 0,%0,%3 \n\ beq- 2f \n\ add %0,%2,%0 \n" " stdcx. %0,0,%1 \n\ bne- 1b \n" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER " subf %0,%2,%0 \n\ 2:" : "=&r" (t) diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h index 56f2f2ea563..30964ae2d09 100644 --- a/arch/powerpc/include/asm/bitops.h +++ b/arch/powerpc/include/asm/bitops.h @@ -65,7 +65,7 @@ static __inline__ void fn(unsigned long mask, \ unsigned long *p = (unsigned long *)_p; \ __asm__ __volatile__ ( \ prefix \ -"1:" PPC_LLARX "%0,0,%3\n" \ +"1:" PPC_LLARX(%0,0,%3,0) "\n" \ stringify_in_c(op) "%0,%0,%2\n" \ PPC405_ERR77(0,%3) \ PPC_STLCX "%0,0,%3\n" \ @@ -78,7 +78,7 @@ static __inline__ void fn(unsigned long mask, \ DEFINE_BITOP(set_bits, or, "", "") DEFINE_BITOP(clear_bits, andc, "", "") -DEFINE_BITOP(clear_bits_unlock, andc, LWSYNC_ON_SMP, "") +DEFINE_BITOP(clear_bits_unlock, andc, PPC_RELEASE_BARRIER, "") DEFINE_BITOP(change_bits, xor, "", "") static __inline__ void set_bit(int nr, volatile unsigned long *addr) @@ -103,31 +103,35 @@ static __inline__ void change_bit(int nr, volatile unsigned long *addr) /* Like DEFINE_BITOP(), with changes to the arguments to 'op' and the output * operands. */ -#define DEFINE_TESTOP(fn, op, prefix, postfix) \ -static __inline__ unsigned long fn( \ - unsigned long mask, \ - volatile unsigned long *_p) \ -{ \ - unsigned long old, t; \ - unsigned long *p = (unsigned long *)_p; \ - __asm__ __volatile__ ( \ - prefix \ -"1:" PPC_LLARX "%0,0,%3\n" \ - stringify_in_c(op) "%1,%0,%2\n" \ - PPC405_ERR77(0,%3) \ - PPC_STLCX "%1,0,%3\n" \ - "bne- 1b\n" \ - postfix \ - : "=&r" (old), "=&r" (t) \ - : "r" (mask), "r" (p) \ - : "cc", "memory"); \ - return (old & mask); \ +#define DEFINE_TESTOP(fn, op, prefix, postfix, eh) \ +static __inline__ unsigned long fn( \ + unsigned long mask, \ + volatile unsigned long *_p) \ +{ \ + unsigned long old, t; \ + unsigned long *p = (unsigned long *)_p; \ + __asm__ __volatile__ ( \ + prefix \ +"1:" PPC_LLARX(%0,0,%3,eh) "\n" \ + stringify_in_c(op) "%1,%0,%2\n" \ + PPC405_ERR77(0,%3) \ + PPC_STLCX "%1,0,%3\n" \ + "bne- 1b\n" \ + postfix \ + : "=&r" (old), "=&r" (t) \ + : "r" (mask), "r" (p) \ + : "cc", "memory"); \ + return (old & mask); \ } -DEFINE_TESTOP(test_and_set_bits, or, LWSYNC_ON_SMP, ISYNC_ON_SMP) -DEFINE_TESTOP(test_and_set_bits_lock, or, "", ISYNC_ON_SMP) -DEFINE_TESTOP(test_and_clear_bits, andc, LWSYNC_ON_SMP, ISYNC_ON_SMP) -DEFINE_TESTOP(test_and_change_bits, xor, LWSYNC_ON_SMP, ISYNC_ON_SMP) +DEFINE_TESTOP(test_and_set_bits, or, PPC_RELEASE_BARRIER, + PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_set_bits_lock, or, "", + PPC_ACQUIRE_BARRIER, 1) +DEFINE_TESTOP(test_and_clear_bits, andc, PPC_RELEASE_BARRIER, + PPC_ACQUIRE_BARRIER, 0) +DEFINE_TESTOP(test_and_change_bits, xor, PPC_RELEASE_BARRIER, + PPC_ACQUIRE_BARRIER, 0) static __inline__ int test_and_set_bit(unsigned long nr, volatile unsigned long *addr) @@ -158,7 +162,7 @@ static __inline__ int test_and_change_bit(unsigned long nr, static __inline__ void __clear_bit_unlock(int nr, volatile unsigned long *addr) { - __asm__ __volatile__(LWSYNC_ON_SMP "" ::: "memory"); + __asm__ __volatile__(PPC_RELEASE_BARRIER "" ::: "memory"); __clear_bit(nr, addr); } diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 80f315e8a42..abb833b0e58 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -381,9 +381,9 @@ extern const char *powerpc_base_platform; #define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN) /* 64-bit CPUs */ -#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ +#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | \ CPU_FTR_IABR | CPU_FTR_PPC_LE) -#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ +#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | \ CPU_FTR_IABR | \ CPU_FTR_MMCRA | CPU_FTR_CTRL) #define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ diff --git a/arch/powerpc/include/asm/cputime.h b/arch/powerpc/include/asm/cputime.h index fa19f3fe05f..8bdc6a9e577 100644 --- a/arch/powerpc/include/asm/cputime.h +++ b/arch/powerpc/include/asm/cputime.h @@ -73,10 +73,9 @@ static inline unsigned long cputime_to_jiffies(const cputime_t ct) static inline cputime_t cputime_to_scaled(const cputime_t ct) { if (cpu_has_feature(CPU_FTR_SPURR) && - per_cpu(cputime_last_delta, smp_processor_id())) - return ct * - per_cpu(cputime_scaled_last_delta, smp_processor_id())/ - per_cpu(cputime_last_delta, smp_processor_id()); + __get_cpu_var(cputime_last_delta)) + return ct * __get_cpu_var(cputime_scaled_last_delta) / + __get_cpu_var(cputime_last_delta); return ct; } diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h index cbd4dfa4bce..96a7d067fbb 100644 --- a/arch/powerpc/include/asm/feature-fixups.h +++ b/arch/powerpc/include/asm/feature-fixups.h @@ -165,7 +165,7 @@ label##2: \ .pushsection sect,"a"; \ .align 2; \ label##3: \ - .long label##1b-label##3b; \ + FTR_ENTRY_OFFSET label##1b-label##3b; \ .popsection; #endif /* __ASM_POWERPC_FEATURE_FIXUPS_H */ diff --git a/arch/powerpc/include/asm/futex.h b/arch/powerpc/include/asm/futex.h index 9696cc36d2d..7c589ef81fb 100644 --- a/arch/powerpc/include/asm/futex.h +++ b/arch/powerpc/include/asm/futex.h @@ -11,7 +11,7 @@ #define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ __asm__ __volatile ( \ - LWSYNC_ON_SMP \ + PPC_RELEASE_BARRIER \ "1: lwarx %0,0,%2\n" \ insn \ PPC405_ERR77(0, %2) \ @@ -90,14 +90,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) return -EFAULT; __asm__ __volatile__ ( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%2 # futex_atomic_cmpxchg_inatomic\n\ cmpw 0,%0,%3\n\ bne- 3f\n" PPC405_ERR77(0,%2) "2: stwcx. %4,0,%2\n\ bne- 1b\n" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "3: .section .fixup,\"ax\"\n\ 4: li %0,%5\n\ b 3b\n\ diff --git a/arch/powerpc/include/asm/hardirq.h b/arch/powerpc/include/asm/hardirq.h index fb3c05a0cbb..3147a297012 100644 --- a/arch/powerpc/include/asm/hardirq.h +++ b/arch/powerpc/include/asm/hardirq.h @@ -1 +1,29 @@ -#include <asm-generic/hardirq.h> +#ifndef _ASM_POWERPC_HARDIRQ_H +#define _ASM_POWERPC_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int timer_irqs; + unsigned int pmu_irqs; + unsigned int mce_exceptions; + unsigned int spurious_irqs; +} ____cacheline_aligned irq_cpustat_t; + +DECLARE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); + +#define __ARCH_IRQ_STAT + +#define local_softirq_pending() __get_cpu_var(irq_stat).__softirq_pending + +static inline void ack_bad_irq(unsigned int irq) +{ + printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq); +} + +extern u64 arch_irq_stat_cpu(unsigned int cpu); +#define arch_irq_stat_cpu arch_irq_stat_cpu + +#endif /* _ASM_POWERPC_HARDIRQ_H */ diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h index 84b457a3c1b..ce58c80e1bc 100644 --- a/arch/powerpc/include/asm/local.h +++ b/arch/powerpc/include/asm/local.h @@ -24,7 +24,7 @@ static __inline__ long local_add_return(long a, local_t *l) long t; __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_add_return\n\ +"1:" PPC_LLARX(%0,0,%2,0) " # local_add_return\n\ add %0,%1,%0\n" PPC405_ERR77(0,%2) PPC_STLCX "%0,0,%2 \n\ @@ -43,7 +43,7 @@ static __inline__ long local_sub_return(long a, local_t *l) long t; __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%2 # local_sub_return\n\ +"1:" PPC_LLARX(%0,0,%2,0) " # local_sub_return\n\ subf %0,%1,%0\n" PPC405_ERR77(0,%2) PPC_STLCX "%0,0,%2 \n\ @@ -60,7 +60,7 @@ static __inline__ long local_inc_return(local_t *l) long t; __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_inc_return\n\ +"1:" PPC_LLARX(%0,0,%1,0) " # local_inc_return\n\ addic %0,%0,1\n" PPC405_ERR77(0,%1) PPC_STLCX "%0,0,%1 \n\ @@ -87,7 +87,7 @@ static __inline__ long local_dec_return(local_t *l) long t; __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_return\n\ +"1:" PPC_LLARX(%0,0,%1,0) " # local_dec_return\n\ addic %0,%0,-1\n" PPC405_ERR77(0,%1) PPC_STLCX "%0,0,%1\n\ @@ -117,7 +117,7 @@ static __inline__ int local_add_unless(local_t *l, long a, long u) long t; __asm__ __volatile__ ( -"1:" PPC_LLARX "%0,0,%1 # local_add_unless\n\ +"1:" PPC_LLARX(%0,0,%1,0) " # local_add_unless\n\ cmpw 0,%0,%3 \n\ beq- 2f \n\ add %0,%2,%0 \n" @@ -147,7 +147,7 @@ static __inline__ long local_dec_if_positive(local_t *l) long t; __asm__ __volatile__( -"1:" PPC_LLARX "%0,0,%1 # local_dec_if_positive\n\ +"1:" PPC_LLARX(%0,0,%1,0) " # local_dec_if_positive\n\ cmpwi %0,1\n\ addi %0,%0,-1\n\ blt- 2f\n" diff --git a/arch/powerpc/include/asm/mpc5121.h b/arch/powerpc/include/asm/mpc5121.h new file mode 100644 index 00000000000..e6a30bb1d16 --- /dev/null +++ b/arch/powerpc/include/asm/mpc5121.h @@ -0,0 +1,24 @@ +/* + * MPC5121 Prototypes and definitions + * + * This file is licensed under the terms of the GNU General Public + * License version 2. + */ + +#ifndef __ASM_POWERPC_MPC5121_H__ +#define __ASM_POWERPC_MPC5121_H__ + +/* MPC512x Reset module registers */ +struct mpc512x_reset_module { + u32 rcwlr; /* Reset Configuration Word Low Register */ + u32 rcwhr; /* Reset Configuration Word High Register */ + u32 reserved1; + u32 reserved2; + u32 rsr; /* Reset Status Register */ + u32 rmr; /* Reset Mode Register */ + u32 rpr; /* Reset Protection Register */ + u32 rcr; /* Reset Control Register */ + u32 rcer; /* Reset Control Enable Register */ +}; + +#endif /* __ASM_POWERPC_MPC5121_H__ */ diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h index fb841205745..42561f4f032 100644 --- a/arch/powerpc/include/asm/mpc52xx_psc.h +++ b/arch/powerpc/include/asm/mpc52xx_psc.h @@ -25,7 +25,11 @@ #include <asm/types.h> /* Max number of PSCs */ +#ifdef CONFIG_PPC_MPC512x +#define MPC52xx_PSC_MAXNUM 12 +#else #define MPC52xx_PSC_MAXNUM 6 +#endif /* Programmable Serial Controller (PSC) status register bits */ #define MPC52xx_PSC_SR_UNEX_RX 0x0001 diff --git a/arch/powerpc/include/asm/mpic.h b/arch/powerpc/include/asm/mpic.h index a002682f3a6..61913d9a21a 100644 --- a/arch/powerpc/include/asm/mpic.h +++ b/arch/powerpc/include/asm/mpic.h @@ -289,7 +289,7 @@ struct mpic #ifdef CONFIG_MPIC_U3_HT_IRQS /* The fixup table */ struct mpic_irq_fixup *fixups; - spinlock_t fixup_lock; + raw_spinlock_t fixup_lock; #endif /* Register access method */ diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h index dabc01c727b..5399f7e1810 100644 --- a/arch/powerpc/include/asm/mutex.h +++ b/arch/powerpc/include/asm/mutex.h @@ -15,7 +15,7 @@ static inline int __mutex_cmpxchg_lock(atomic_t *v, int old, int new) PPC405_ERR77(0,%1) " stwcx. %3,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "\n\ 2:" : "=&r" (t) @@ -35,7 +35,7 @@ static inline int __mutex_dec_return_lock(atomic_t *v) PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (t) : "r" (&v->counter) : "cc", "memory"); @@ -48,7 +48,7 @@ static inline int __mutex_inc_return_unlock(atomic_t *v) int t; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1 # mutex unlock\n\ addic %0,%0,1\n" PPC405_ERR77(0,%1) diff --git a/arch/powerpc/include/asm/param.h b/arch/powerpc/include/asm/param.h index 094f63d4d5c..965d4542797 100644 --- a/arch/powerpc/include/asm/param.h +++ b/arch/powerpc/include/asm/param.h @@ -1,22 +1 @@ -#ifndef _ASM_POWERPC_PARAM_H -#define _ASM_POWERPC_PARAM_H - -#ifdef __KERNEL__ -#define HZ CONFIG_HZ /* internal kernel timer frequency */ -#define USER_HZ 100 /* for user interfaces in "ticks" */ -#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */ -#endif /* __KERNEL__ */ - -#ifndef HZ -#define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -#define MAXHOSTNAMELEN 64 /* max length of hostname */ - -#endif /* _ASM_POWERPC_PARAM_H */ +#include <asm-generic/param.h> diff --git a/arch/powerpc/include/asm/pmac_feature.h b/arch/powerpc/include/asm/pmac_feature.h index 877c35a4356..00eedc5a4e6 100644 --- a/arch/powerpc/include/asm/pmac_feature.h +++ b/arch/powerpc/include/asm/pmac_feature.h @@ -378,7 +378,7 @@ extern struct macio_chip* macio_find(struct device_node* child, int type); * Those are exported by pmac feature for internal use by arch code * only like the platform function callbacks, do not use directly in drivers */ -extern spinlock_t feature_lock; +extern raw_spinlock_t feature_lock; extern struct device_node *uninorth_node; extern u32 __iomem *uninorth_base; diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index ef9aa84cac5..aea71479759 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -22,8 +22,10 @@ #define PPC_INST_DCBZL 0x7c2007ec #define PPC_INST_ISEL 0x7c00001e #define PPC_INST_ISEL_MASK 0xfc00003e +#define PPC_INST_LDARX 0x7c0000a8 #define PPC_INST_LSWI 0x7c0004aa #define PPC_INST_LSWX 0x7c00042a +#define PPC_INST_LWARX 0x7c000029 #define PPC_INST_LWSYNC 0x7c2004ac #define PPC_INST_LXVD2X 0x7c000698 #define PPC_INST_MCRXR 0x7c000400 @@ -55,15 +57,31 @@ #define __PPC_RA(a) (((a) & 0x1f) << 16) #define __PPC_RB(b) (((b) & 0x1f) << 11) #define __PPC_RS(s) (((s) & 0x1f) << 21) +#define __PPC_RT(s) __PPC_RS(s) #define __PPC_XS(s) ((((s) & 0x1f) << 21) | (((s) & 0x20) >> 5)) #define __PPC_T_TLB(t) (((t) & 0x3) << 21) #define __PPC_WC(w) (((w) & 0x3) << 21) +/* + * Only use the larx hint bit on 64bit CPUs. Once we verify it doesn't have + * any side effects on all 32bit processors, we can do this all the time. + */ +#ifdef CONFIG_PPC64 +#define __PPC_EH(eh) (((eh) & 0x1) << 0) +#else +#define __PPC_EH(eh) 0 +#endif /* Deal with instructions that older assemblers aren't aware of */ #define PPC_DCBAL(a, b) stringify_in_c(.long PPC_INST_DCBAL | \ __PPC_RA(a) | __PPC_RB(b)) #define PPC_DCBZL(a, b) stringify_in_c(.long PPC_INST_DCBZL | \ __PPC_RA(a) | __PPC_RB(b)) +#define PPC_LDARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LDARX | \ + __PPC_RT(t) | __PPC_RA(a) | \ + __PPC_RB(b) | __PPC_EH(eh)) +#define PPC_LWARX(t, a, b, eh) stringify_in_c(.long PPC_INST_LWARX | \ + __PPC_RT(t) | __PPC_RA(a) | \ + __PPC_RB(b) | __PPC_EH(eh)) #define PPC_MSGSND(b) stringify_in_c(.long PPC_INST_MSGSND | \ __PPC_RB(b)) #define PPC_RFCI stringify_in_c(.long PPC_INST_RFCI) diff --git a/arch/powerpc/include/asm/ppc-pci.h b/arch/powerpc/include/asm/ppc-pci.h index 2828f9d0f66..42fdff0e4b3 100644 --- a/arch/powerpc/include/asm/ppc-pci.h +++ b/arch/powerpc/include/asm/ppc-pci.h @@ -137,6 +137,11 @@ struct device_node * find_device_pe(struct device_node *dn); void eeh_sysfs_add_device(struct pci_dev *pdev); void eeh_sysfs_remove_device(struct pci_dev *pdev); +static inline const char *eeh_pci_name(struct pci_dev *pdev) +{ + return pdev ? pci_name(pdev) : "<null>"; +} + #endif /* CONFIG_EEH */ #else /* CONFIG_PCI */ diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 9eed29eee60..221ba624046 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -161,9 +161,41 @@ struct thread_struct { #ifdef CONFIG_PPC32 void *pgdir; /* root of page-table tree */ #endif -#if defined(CONFIG_4xx) || defined (CONFIG_BOOKE) - unsigned long dbcr0; /* debug control register values */ +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + /* + * The following help to manage the use of Debug Control Registers + * om the BookE platforms. + */ + unsigned long dbcr0; unsigned long dbcr1; +#ifdef CONFIG_BOOKE + unsigned long dbcr2; +#endif + /* + * The stored value of the DBSR register will be the value at the + * last debug interrupt. This register can only be read from the + * user (will never be written to) and has value while helping to + * describe the reason for the last debug trap. Torez + */ + unsigned long dbsr; + /* + * The following will contain addresses used by debug applications + * to help trace and trap on particular address locations. + * The bits in the Debug Control Registers above help define which + * of the following registers will contain valid data and/or addresses. + */ + unsigned long iac1; + unsigned long iac2; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + unsigned long iac3; + unsigned long iac4; +#endif + unsigned long dac1; + unsigned long dac2; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + unsigned long dvc1; + unsigned long dvc2; +#endif #endif /* FP and VSX 0-31 register set */ double fpr[32][TS_FPRWIDTH]; diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h index cbd759e3cd7..b4510812656 100644 --- a/arch/powerpc/include/asm/ptrace.h +++ b/arch/powerpc/include/asm/ptrace.h @@ -24,6 +24,12 @@ * 2 of the License, or (at your option) any later version. */ +#ifdef __KERNEL__ +#include <linux/types.h> +#else +#include <stdint.h> +#endif + #ifndef __ASSEMBLY__ struct pt_regs { @@ -294,4 +300,75 @@ extern void user_disable_single_step(struct task_struct *); #define PTRACE_SINGLEBLOCK 0x100 /* resume execution until next branch */ +#define PPC_PTRACE_GETHWDBGINFO 0x89 +#define PPC_PTRACE_SETHWDEBUG 0x88 +#define PPC_PTRACE_DELHWDEBUG 0x87 + +#ifndef __ASSEMBLY__ + +struct ppc_debug_info { + uint32_t version; /* Only version 1 exists to date */ + uint32_t num_instruction_bps; + uint32_t num_data_bps; + uint32_t num_condition_regs; + uint32_t data_bp_alignment; + uint32_t sizeof_condition; /* size of the DVC register */ + uint64_t features; +}; + +#endif /* __ASSEMBLY__ */ + +/* + * features will have bits indication whether there is support for: + */ +#define PPC_DEBUG_FEATURE_INSN_BP_RANGE 0x0000000000000001 +#define PPC_DEBUG_FEATURE_INSN_BP_MASK 0x0000000000000002 +#define PPC_DEBUG_FEATURE_DATA_BP_RANGE 0x0000000000000004 +#define PPC_DEBUG_FEATURE_DATA_BP_MASK 0x0000000000000008 + +#ifndef __ASSEMBLY__ + +struct ppc_hw_breakpoint { + uint32_t version; /* currently, version must be 1 */ + uint32_t trigger_type; /* only some combinations allowed */ + uint32_t addr_mode; /* address match mode */ + uint32_t condition_mode; /* break/watchpoint condition flags */ + uint64_t addr; /* break/watchpoint address */ + uint64_t addr2; /* range end or mask */ + uint64_t condition_value; /* contents of the DVC register */ +}; + +#endif /* __ASSEMBLY__ */ + +/* + * Trigger Type + */ +#define PPC_BREAKPOINT_TRIGGER_EXECUTE 0x00000001 +#define PPC_BREAKPOINT_TRIGGER_READ 0x00000002 +#define PPC_BREAKPOINT_TRIGGER_WRITE 0x00000004 +#define PPC_BREAKPOINT_TRIGGER_RW \ + (PPC_BREAKPOINT_TRIGGER_READ | PPC_BREAKPOINT_TRIGGER_WRITE) + +/* + * Address Mode + */ +#define PPC_BREAKPOINT_MODE_EXACT 0x00000000 +#define PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE 0x00000001 +#define PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE 0x00000002 +#define PPC_BREAKPOINT_MODE_MASK 0x00000003 + +/* + * Condition Mode + */ +#define PPC_BREAKPOINT_CONDITION_MODE 0x00000003 +#define PPC_BREAKPOINT_CONDITION_NONE 0x00000000 +#define PPC_BREAKPOINT_CONDITION_AND 0x00000001 +#define PPC_BREAKPOINT_CONDITION_EXACT PPC_BREAKPOINT_CONDITION_AND +#define PPC_BREAKPOINT_CONDITION_OR 0x00000002 +#define PPC_BREAKPOINT_CONDITION_AND_OR 0x00000003 +#define PPC_BREAKPOINT_CONDITION_BE_ALL 0x00ff0000 +#define PPC_BREAKPOINT_CONDITION_BE_SHIFT 16 +#define PPC_BREAKPOINT_CONDITION_BE(n) \ + (1<<((n)+PPC_BREAKPOINT_CONDITION_BE_SHIFT)) + #endif /* _ASM_POWERPC_PTRACE_H */ diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h index 3bf78350552..8808d307fe7 100644 --- a/arch/powerpc/include/asm/reg_booke.h +++ b/arch/powerpc/include/asm/reg_booke.h @@ -248,6 +248,8 @@ #define DBSR_RET 0x00008000 /* Return Debug Event */ #define DBSR_CIRPT 0x00000040 /* Critical Interrupt Taken Event */ #define DBSR_CRET 0x00000020 /* Critical Return Debug Event */ +#define DBSR_IAC12ATS 0x00000002 /* Instr Address Compare 1/2 Toggle */ +#define DBSR_IAC34ATS 0x00000001 /* Instr Address Compare 3/4 Toggle */ #endif #ifdef CONFIG_40x #define DBSR_IC 0x80000000 /* Instruction Completion */ @@ -313,6 +315,38 @@ #define DBCR0_IA12T 0x00008000 /* Instr Addr 1-2 range Toggle */ #define DBCR0_IA34T 0x00004000 /* Instr Addr 3-4 range Toggle */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ + +#define dbcr_iac_range(task) ((task)->thread.dbcr0) +#define DBCR_IAC12I DBCR0_IA12 /* Range Inclusive */ +#define DBCR_IAC12X (DBCR0_IA12 | DBCR0_IA12X) /* Range Exclusive */ +#define DBCR_IAC12MODE (DBCR0_IA12 | DBCR0_IA12X) /* IAC 1-2 Mode Bits */ +#define DBCR_IAC34I DBCR0_IA34 /* Range Inclusive */ +#define DBCR_IAC34X (DBCR0_IA34 | DBCR0_IA34X) /* Range Exclusive */ +#define DBCR_IAC34MODE (DBCR0_IA34 | DBCR0_IA34X) /* IAC 3-4 Mode Bits */ + +/* Bit definitions related to the DBCR1. */ +#define DBCR1_DAC1R 0x80000000 /* DAC1 Read Debug Event */ +#define DBCR1_DAC2R 0x40000000 /* DAC2 Read Debug Event */ +#define DBCR1_DAC1W 0x20000000 /* DAC1 Write Debug Event */ +#define DBCR1_DAC2W 0x10000000 /* DAC2 Write Debug Event */ + +#define dbcr_dac(task) ((task)->thread.dbcr1) +#define DBCR_DAC1R DBCR1_DAC1R +#define DBCR_DAC1W DBCR1_DAC1W +#define DBCR_DAC2R DBCR1_DAC2R +#define DBCR_DAC2W DBCR1_DAC2W + +/* + * Are there any active Debug Events represented in the + * Debug Control Registers? + */ +#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ + DBCR0_IAC3 | DBCR0_IAC4) +#define DBCR1_ACTIVE_EVENTS (DBCR1_DAC1R | DBCR1_DAC2R | \ + DBCR1_DAC1W | DBCR1_DAC2W) +#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ + ((dbcr1) & DBCR1_ACTIVE_EVENTS)) + #elif defined(CONFIG_BOOKE) #define DBCR0_EDM 0x80000000 /* External Debug Mode */ #define DBCR0_IDM 0x40000000 /* Internal Debug Mode */ @@ -342,19 +376,79 @@ #define DBCR0_CRET 0x00000020 /* Critical Return Debug Event */ #define DBCR0_FT 0x00000001 /* Freeze Timers on debug event */ +#define dbcr_dac(task) ((task)->thread.dbcr0) +#define DBCR_DAC1R DBCR0_DAC1R +#define DBCR_DAC1W DBCR0_DAC1W +#define DBCR_DAC2R DBCR0_DAC2R +#define DBCR_DAC2W DBCR0_DAC2W + /* Bit definitions related to the DBCR1. */ +#define DBCR1_IAC1US 0xC0000000 /* Instr Addr Cmp 1 Sup/User */ +#define DBCR1_IAC1ER 0x30000000 /* Instr Addr Cmp 1 Eff/Real */ +#define DBCR1_IAC1ER_01 0x10000000 /* reserved */ +#define DBCR1_IAC1ER_10 0x20000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC1ER_11 0x30000000 /* Instr Addr Cmp 1 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC2US 0x0C000000 /* Instr Addr Cmp 2 Sup/User */ +#define DBCR1_IAC2ER 0x03000000 /* Instr Addr Cmp 2 Eff/Real */ +#define DBCR1_IAC2ER_01 0x01000000 /* reserved */ +#define DBCR1_IAC2ER_10 0x02000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC2ER_11 0x03000000 /* Instr Addr Cmp 2 Eff/Real MSR[IS]=1 */ #define DBCR1_IAC12M 0x00800000 /* Instr Addr 1-2 range enable */ #define DBCR1_IAC12MX 0x00C00000 /* Instr Addr 1-2 range eXclusive */ #define DBCR1_IAC12AT 0x00010000 /* Instr Addr 1-2 range Toggle */ +#define DBCR1_IAC3US 0x0000C000 /* Instr Addr Cmp 3 Sup/User */ +#define DBCR1_IAC3ER 0x00003000 /* Instr Addr Cmp 3 Eff/Real */ +#define DBCR1_IAC3ER_01 0x00001000 /* reserved */ +#define DBCR1_IAC3ER_10 0x00002000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC3ER_11 0x00003000 /* Instr Addr Cmp 3 Eff/Real MSR[IS]=1 */ +#define DBCR1_IAC4US 0x00000C00 /* Instr Addr Cmp 4 Sup/User */ +#define DBCR1_IAC4ER 0x00000300 /* Instr Addr Cmp 4 Eff/Real */ +#define DBCR1_IAC4ER_01 0x00000100 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC4ER_10 0x00000200 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=0 */ +#define DBCR1_IAC4ER_11 0x00000300 /* Instr Addr Cmp 4 Eff/Real MSR[IS]=1 */ #define DBCR1_IAC34M 0x00000080 /* Instr Addr 3-4 range enable */ #define DBCR1_IAC34MX 0x000000C0 /* Instr Addr 3-4 range eXclusive */ #define DBCR1_IAC34AT 0x00000001 /* Instr Addr 3-4 range Toggle */ +#define dbcr_iac_range(task) ((task)->thread.dbcr1) +#define DBCR_IAC12I DBCR1_IAC12M /* Range Inclusive */ +#define DBCR_IAC12X DBCR1_IAC12MX /* Range Exclusive */ +#define DBCR_IAC12MODE DBCR1_IAC12MX /* IAC 1-2 Mode Bits */ +#define DBCR_IAC34I DBCR1_IAC34M /* Range Inclusive */ +#define DBCR_IAC34X DBCR1_IAC34MX /* Range Exclusive */ +#define DBCR_IAC34MODE DBCR1_IAC34MX /* IAC 3-4 Mode Bits */ + /* Bit definitions related to the DBCR2. */ +#define DBCR2_DAC1US 0xC0000000 /* Data Addr Cmp 1 Sup/User */ +#define DBCR2_DAC1ER 0x30000000 /* Data Addr Cmp 1 Eff/Real */ +#define DBCR2_DAC2US 0x00000000 /* Data Addr Cmp 2 Sup/User */ +#define DBCR2_DAC2ER 0x00000000 /* Data Addr Cmp 2 Eff/Real */ #define DBCR2_DAC12M 0x00800000 /* DAC 1-2 range enable */ +#define DBCR2_DAC12MM 0x00400000 /* DAC 1-2 Mask mode*/ #define DBCR2_DAC12MX 0x00C00000 /* DAC 1-2 range eXclusive */ +#define DBCR2_DAC12MODE 0x00C00000 /* DAC 1-2 Mode Bits */ #define DBCR2_DAC12A 0x00200000 /* DAC 1-2 Asynchronous */ -#endif +#define DBCR2_DVC1M 0x000C0000 /* Data Value Comp 1 Mode */ +#define DBCR2_DVC1M_SHIFT 18 /* # of bits to shift DBCR2_DVC1M */ +#define DBCR2_DVC2M 0x00030000 /* Data Value Comp 2 Mode */ +#define DBCR2_DVC2M_SHIFT 16 /* # of bits to shift DBCR2_DVC2M */ +#define DBCR2_DVC1BE 0x00000F00 /* Data Value Comp 1 Byte */ +#define DBCR2_DVC1BE_SHIFT 8 /* # of bits to shift DBCR2_DVC1BE */ +#define DBCR2_DVC2BE 0x0000000F /* Data Value Comp 2 Byte */ +#define DBCR2_DVC2BE_SHIFT 0 /* # of bits to shift DBCR2_DVC2BE */ + +/* + * Are there any active Debug Events represented in the + * Debug Control Registers? + */ +#define DBCR0_ACTIVE_EVENTS (DBCR0_ICMP | DBCR0_IAC1 | DBCR0_IAC2 | \ + DBCR0_IAC3 | DBCR0_IAC4 | DBCR0_DAC1R | \ + DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W) +#define DBCR1_ACTIVE_EVENTS 0 + +#define DBCR_ACTIVE_EVENTS(dbcr0, dbcr1) (((dbcr0) & DBCR0_ACTIVE_EVENTS) || \ + ((dbcr1) & DBCR1_ACTIVE_EVENTS)) +#endif /* #elif defined(CONFIG_BOOKE) */ /* Bit definitions related to the TCR. */ #define TCR_WP(x) (((x)&0x3)<<30) /* WDT Period */ diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h index 764094cff68..f9611bd69ed 100644 --- a/arch/powerpc/include/asm/spinlock.h +++ b/arch/powerpc/include/asm/spinlock.h @@ -27,6 +27,7 @@ #endif #include <asm/asm-compat.h> #include <asm/synch.h> +#include <asm/ppc-opcode.h> #define arch_spin_is_locked(x) ((x)->slock != 0) @@ -60,13 +61,14 @@ static inline unsigned long __arch_spin_trylock(arch_spinlock_t *lock) token = LOCK_TOKEN; __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ +"1: " PPC_LWARX(%0,0,%2,1) "\n\ cmpwi 0,%0,0\n\ bne- 2f\n\ stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" + : "=&r" (tmp) : "r" (token), "r" (&lock->slock) : "cr0", "memory"); @@ -144,7 +146,7 @@ static inline void arch_spin_unlock(arch_spinlock_t *lock) { SYNC_IO; __asm__ __volatile__("# arch_spin_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); + PPC_RELEASE_BARRIER: : :"memory"); lock->slock = 0; } @@ -186,15 +188,15 @@ static inline long __arch_read_trylock(arch_rwlock_t *rw) long tmp; __asm__ __volatile__( -"1: lwarx %0,0,%1\n" +"1: " PPC_LWARX(%0,0,%1,1) "\n" __DO_SIGN_EXTEND " addic. %0,%0,1\n\ ble- 2f\n" PPC405_ERR77(0,%1) " stwcx. %0,0,%1\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" : "=&r" (tmp) : "r" (&rw->lock) : "cr0", "xer", "memory"); @@ -211,14 +213,14 @@ static inline long __arch_write_trylock(arch_rwlock_t *rw) token = WRLOCK_TOKEN; __asm__ __volatile__( -"1: lwarx %0,0,%2\n\ +"1: " PPC_LWARX(%0,0,%2,1) "\n\ cmpwi 0,%0,0\n\ bne- 2f\n" PPC405_ERR77(0,%1) " stwcx. %1,0,%2\n\ - bne- 1b\n\ - isync\n\ -2:" : "=&r" (tmp) + bne- 1b\n" + PPC_ACQUIRE_BARRIER +"2:" : "=&r" (tmp) : "r" (token), "r" (&rw->lock) : "cr0", "memory"); @@ -269,7 +271,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) __asm__ __volatile__( "# read_unlock\n\t" - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%1\n\ addic %0,%0,-1\n" PPC405_ERR77(0,%1) @@ -283,7 +285,7 @@ static inline void arch_read_unlock(arch_rwlock_t *rw) static inline void arch_write_unlock(arch_rwlock_t *rw) { __asm__ __volatile__("# write_unlock\n\t" - LWSYNC_ON_SMP: : :"memory"); + PPC_RELEASE_BARRIER: : :"memory"); rw->lock = 0; } diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h index 28f6ddbff4c..d7cab44643c 100644 --- a/arch/powerpc/include/asm/synch.h +++ b/arch/powerpc/include/asm/synch.h @@ -37,11 +37,15 @@ static inline void isync(void) #endif #ifdef CONFIG_SMP -#define ISYNC_ON_SMP "\n\tisync\n" -#define LWSYNC_ON_SMP stringify_in_c(LWSYNC) "\n" +#define __PPC_ACQUIRE_BARRIER \ + START_LWSYNC_SECTION(97); \ + isync; \ + MAKE_LWSYNC_SECTION_ENTRY(97, __lwsync_fixup); +#define PPC_ACQUIRE_BARRIER "\n" stringify_in_c(__PPC_ACQUIRE_BARRIER) +#define PPC_RELEASE_BARRIER stringify_in_c(LWSYNC) "\n" #else -#define ISYNC_ON_SMP -#define LWSYNC_ON_SMP +#define PPC_ACQUIRE_BARRIER +#define PPC_RELEASE_BARRIER #endif #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h index bb8e006a47c..a6297c67c3d 100644 --- a/arch/powerpc/include/asm/system.h +++ b/arch/powerpc/include/asm/system.h @@ -112,8 +112,13 @@ static inline int debugger_fault_handler(struct pt_regs *regs) { return 0; } #endif extern int set_dabr(unsigned long dabr); +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +extern void do_send_trap(struct pt_regs *regs, unsigned long address, + unsigned long error_code, int signal_code, int brkpt); +#else extern void do_dabr(struct pt_regs *regs, unsigned long address, unsigned long error_code); +#endif extern void print_backtrace(unsigned long *); extern void show_regs(struct pt_regs * regs); extern void flush_instruction_cache(void); @@ -232,12 +237,12 @@ __xchg_u32(volatile void *p, unsigned long val) unsigned long prev; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%2 \n" PPC405_ERR77(0,%2) " stwcx. %3,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (prev), "+m" (*(volatile unsigned int *)p) : "r" (p), "r" (val) : "cc", "memory"); @@ -275,12 +280,12 @@ __xchg_u64(volatile void *p, unsigned long val) unsigned long prev; __asm__ __volatile__( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%2 \n" PPC405_ERR77(0,%2) " stdcx. %3,0,%2 \n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER : "=&r" (prev), "+m" (*(volatile unsigned long *)p) : "r" (p), "r" (val) : "cc", "memory"); @@ -366,14 +371,14 @@ __cmpxchg_u32(volatile unsigned int *p, unsigned long old, unsigned long new) unsigned int prev; __asm__ __volatile__ ( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: lwarx %0,0,%2 # __cmpxchg_u32\n\ cmpw 0,%0,%3\n\ bne- 2f\n" PPC405_ERR77(0,%2) " stwcx. %4,0,%2\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "\n\ 2:" : "=&r" (prev), "+m" (*p) @@ -412,13 +417,13 @@ __cmpxchg_u64(volatile unsigned long *p, unsigned long old, unsigned long new) unsigned long prev; __asm__ __volatile__ ( - LWSYNC_ON_SMP + PPC_RELEASE_BARRIER "1: ldarx %0,0,%2 # __cmpxchg_u64\n\ cmpd 0,%0,%3\n\ bne- 2f\n\ stdcx. %4,0,%2\n\ bne- 1b" - ISYNC_ON_SMP + PPC_ACQUIRE_BARRIER "\n\ 2:" : "=&r" (prev), "+m" (*p) diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h index bbf89701d7a..8eaec310a25 100644 --- a/arch/powerpc/include/asm/topology.h +++ b/arch/powerpc/include/asm/topology.h @@ -38,27 +38,33 @@ static inline int pcibus_to_node(struct pci_bus *bus) cpumask_of_node(pcibus_to_node(bus))) /* sched_domains SD_NODE_INIT for PPC64 machines */ -#define SD_NODE_INIT (struct sched_domain) { \ - .parent = NULL, \ - .child = NULL, \ - .groups = NULL, \ - .min_interval = 8, \ - .max_interval = 32, \ - .busy_factor = 32, \ - .imbalance_pct = 125, \ - .cache_nice_tries = 1, \ - .busy_idx = 3, \ - .idle_idx = 1, \ - .newidle_idx = 0, \ - .wake_idx = 0, \ - .flags = SD_LOAD_BALANCE \ - | SD_BALANCE_EXEC \ - | SD_BALANCE_FORK \ - | SD_BALANCE_NEWIDLE \ - | SD_SERIALIZE, \ - .last_balance = jiffies, \ - .balance_interval = 1, \ - .nr_balance_failed = 0, \ +#define SD_NODE_INIT (struct sched_domain) { \ + .min_interval = 8, \ + .max_interval = 32, \ + .busy_factor = 32, \ + .imbalance_pct = 125, \ + .cache_nice_tries = 1, \ + .busy_idx = 3, \ + .idle_idx = 1, \ + .newidle_idx = 0, \ + .wake_idx = 0, \ + .forkexec_idx = 0, \ + \ + .flags = 1*SD_LOAD_BALANCE \ + | 1*SD_BALANCE_NEWIDLE \ + | 1*SD_BALANCE_EXEC \ + | 1*SD_BALANCE_FORK \ + | 0*SD_BALANCE_WAKE \ + | 0*SD_WAKE_AFFINE \ + | 0*SD_PREFER_LOCAL \ + | 0*SD_SHARE_CPUPOWER \ + | 0*SD_POWERSAVINGS_BALANCE \ + | 0*SD_SHARE_PKG_RESOURCES \ + | 1*SD_SERIALIZE \ + | 0*SD_PREFER_SIBLING \ + , \ + .last_balance = jiffies, \ + .balance_interval = 1, \ } extern void __init dump_numa_cpu_topology(void); diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index bdcb557d470..07109d84378 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -791,9 +791,8 @@ _GLOBAL(enter_rtas) li r9,1 rldicr r9,r9,MSR_SF_LG,(63-MSR_SF_LG) - ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP + ori r9,r9,MSR_IR|MSR_DR|MSR_FE0|MSR_FE1|MSR_FP|MSR_RI andc r6,r0,r9 - ori r6,r6,MSR_RI sync /* disable interrupts so SRR0/1 */ mtmsrd r0 /* don't get trashed */ diff --git a/arch/powerpc/kernel/firmware.c b/arch/powerpc/kernel/firmware.c index 1679a70bbca..6b1f4271eb5 100644 --- a/arch/powerpc/kernel/firmware.c +++ b/arch/powerpc/kernel/firmware.c @@ -17,5 +17,5 @@ #include <asm/firmware.h> -unsigned long powerpc_firmware_features; +unsigned long powerpc_firmware_features __read_mostly; EXPORT_SYMBOL_GPL(powerpc_firmware_features); diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S index 7f4bd7f3b6a..25793bb0e78 100644 --- a/arch/powerpc/kernel/head_fsl_booke.S +++ b/arch/powerpc/kernel/head_fsl_booke.S @@ -214,11 +214,11 @@ skpinv: addi r6,r6,1 /* Increment */ bl 1f /* Find our address */ 1: mflr r9 rlwimi r7,r9,0,20,31 - addi r7,r7,24 + addi r7,r7,(2f - 1b) mtspr SPRN_SRR0,r7 mtspr SPRN_SRR1,r6 rfi - +2: /* 4. Clear out PIDs & Search info */ li r6,0 mtspr SPRN_MAS6,r6 diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 9040330b053..64f6f2031c2 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -73,8 +73,10 @@ #define CREATE_TRACE_POINTS #include <asm/trace.h> +DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); +EXPORT_PER_CPU_SYMBOL(irq_stat); + int __irq_offset_value; -static int ppc_spurious_interrupts; #ifdef CONFIG_PPC32 EXPORT_SYMBOL(__irq_offset_value); @@ -180,30 +182,64 @@ notrace void raw_local_irq_restore(unsigned long en) EXPORT_SYMBOL(raw_local_irq_restore); #endif /* CONFIG_PPC64 */ +static int show_other_interrupts(struct seq_file *p, int prec) +{ + int j; + +#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) + if (tau_initialized) { + seq_printf(p, "%*s: ", prec, "TAU"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", tau_interrupts(j)); + seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); + } +#endif /* CONFIG_PPC32 && CONFIG_TAU_INT */ + + seq_printf(p, "%*s: ", prec, "LOC"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", per_cpu(irq_stat, j).timer_irqs); + seq_printf(p, " Local timer interrupts\n"); + + seq_printf(p, "%*s: ", prec, "SPU"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", per_cpu(irq_stat, j).spurious_irqs); + seq_printf(p, " Spurious interrupts\n"); + + seq_printf(p, "%*s: ", prec, "CNT"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", per_cpu(irq_stat, j).pmu_irqs); + seq_printf(p, " Performance monitoring interrupts\n"); + + seq_printf(p, "%*s: ", prec, "MCE"); + for_each_online_cpu(j) + seq_printf(p, "%10u ", per_cpu(irq_stat, j).mce_exceptions); + seq_printf(p, " Machine check exceptions\n"); + + return 0; +} + int show_interrupts(struct seq_file *p, void *v) { - int i = *(loff_t *)v, j; + unsigned long flags, any_count = 0; + int i = *(loff_t *) v, j, prec; struct irqaction *action; struct irq_desc *desc; - unsigned long flags; + if (i > nr_irqs) + return 0; + + for (prec = 3, j = 1000; prec < 10 && j <= nr_irqs; ++prec) + j *= 10; + + if (i == nr_irqs) + return show_other_interrupts(p, prec); + + /* print header */ if (i == 0) { - seq_puts(p, " "); + seq_printf(p, "%*s", prec + 8, ""); for_each_online_cpu(j) - seq_printf(p, "CPU%d ", j); + seq_printf(p, "CPU%-8d", j); seq_putc(p, '\n'); - } else if (i == nr_irqs) { -#if defined(CONFIG_PPC32) && defined(CONFIG_TAU_INT) - if (tau_initialized){ - seq_puts(p, "TAU: "); - for_each_online_cpu(j) - seq_printf(p, "%10u ", tau_interrupts(j)); - seq_puts(p, " PowerPC Thermal Assist (cpu temp)\n"); - } -#endif /* CONFIG_PPC32 && CONFIG_TAU_INT*/ - seq_printf(p, "BAD: %10u\n", ppc_spurious_interrupts); - - return 0; } desc = irq_to_desc(i); @@ -211,37 +247,48 @@ int show_interrupts(struct seq_file *p, void *v) return 0; raw_spin_lock_irqsave(&desc->lock, flags); - + for_each_online_cpu(j) + any_count |= kstat_irqs_cpu(i, j); action = desc->action; - if (!action || !action->handler) - goto skip; + if (!action && !any_count) + goto out; - seq_printf(p, "%3d: ", i); -#ifdef CONFIG_SMP + seq_printf(p, "%*d: ", prec, i); for_each_online_cpu(j) seq_printf(p, "%10u ", kstat_irqs_cpu(i, j)); -#else - seq_printf(p, "%10u ", kstat_irqs(i)); -#endif /* CONFIG_SMP */ if (desc->chip) - seq_printf(p, " %s ", desc->chip->name); + seq_printf(p, " %-16s", desc->chip->name); else - seq_puts(p, " None "); + seq_printf(p, " %-16s", "None"); + seq_printf(p, " %-8s", (desc->status & IRQ_LEVEL) ? "Level" : "Edge"); - seq_printf(p, "%s", (desc->status & IRQ_LEVEL) ? "Level " : "Edge "); - seq_printf(p, " %s", action->name); + if (action) { + seq_printf(p, " %s", action->name); + while ((action = action->next) != NULL) + seq_printf(p, ", %s", action->name); + } - for (action = action->next; action; action = action->next) - seq_printf(p, ", %s", action->name); seq_putc(p, '\n'); - -skip: +out: raw_spin_unlock_irqrestore(&desc->lock, flags); - return 0; } +/* + * /proc/stat helpers + */ +u64 arch_irq_stat_cpu(unsigned int cpu) +{ + u64 sum = per_cpu(irq_stat, cpu).timer_irqs; + + sum += per_cpu(irq_stat, cpu).pmu_irqs; + sum += per_cpu(irq_stat, cpu).mce_exceptions; + sum += per_cpu(irq_stat, cpu).spurious_irqs; + + return sum; +} + #ifdef CONFIG_HOTPLUG_CPU void fixup_irqs(cpumask_t map) { @@ -353,8 +400,7 @@ void do_IRQ(struct pt_regs *regs) if (irq != NO_IRQ && irq != NO_IRQ_IGNORE) handle_one_irq(irq); else if (irq != NO_IRQ_IGNORE) - /* That's not SMP safe ... but who cares ? */ - ppc_spurious_interrupts++; + __get_cpu_var(irq_stat).spurious_irqs++; irq_exit(); set_irq_regs(old_regs); @@ -474,7 +520,7 @@ void do_softirq(void) */ static LIST_HEAD(irq_hosts); -static DEFINE_SPINLOCK(irq_big_lock); +static DEFINE_RAW_SPINLOCK(irq_big_lock); static unsigned int revmap_trees_allocated; static DEFINE_MUTEX(revmap_trees_mutex); struct irq_map_entry irq_map[NR_IRQS]; @@ -520,14 +566,14 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, if (host->ops->match == NULL) host->ops->match = default_irq_host_match; - spin_lock_irqsave(&irq_big_lock, flags); + raw_spin_lock_irqsave(&irq_big_lock, flags); /* If it's a legacy controller, check for duplicates and * mark it as allocated (we use irq 0 host pointer for that */ if (revmap_type == IRQ_HOST_MAP_LEGACY) { if (irq_map[0].host != NULL) { - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); /* If we are early boot, we can't free the structure, * too bad... * this will be fixed once slab is made available early @@ -541,7 +587,7 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, } list_add(&host->link, &irq_hosts); - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); /* Additional setups per revmap type */ switch(revmap_type) { @@ -592,13 +638,13 @@ struct irq_host *irq_find_host(struct device_node *node) * the absence of a device node. This isn't a problem so far * yet though... */ - spin_lock_irqsave(&irq_big_lock, flags); + raw_spin_lock_irqsave(&irq_big_lock, flags); list_for_each_entry(h, &irq_hosts, link) if (h->ops->match(h, node)) { found = h; break; } - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); return found; } EXPORT_SYMBOL_GPL(irq_find_host); @@ -967,7 +1013,7 @@ unsigned int irq_alloc_virt(struct irq_host *host, if (count == 0 || count > (irq_virq_count - NUM_ISA_INTERRUPTS)) return NO_IRQ; - spin_lock_irqsave(&irq_big_lock, flags); + raw_spin_lock_irqsave(&irq_big_lock, flags); /* Use hint for 1 interrupt if any */ if (count == 1 && hint >= NUM_ISA_INTERRUPTS && @@ -991,7 +1037,7 @@ unsigned int irq_alloc_virt(struct irq_host *host, } } if (found == NO_IRQ) { - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); return NO_IRQ; } hint_found: @@ -1000,7 +1046,7 @@ unsigned int irq_alloc_virt(struct irq_host *host, smp_wmb(); irq_map[i].host = host; } - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); return found; } @@ -1012,7 +1058,7 @@ void irq_free_virt(unsigned int virq, unsigned int count) WARN_ON (virq < NUM_ISA_INTERRUPTS); WARN_ON (count == 0 || (virq + count) > irq_virq_count); - spin_lock_irqsave(&irq_big_lock, flags); + raw_spin_lock_irqsave(&irq_big_lock, flags); for (i = virq; i < (virq + count); i++) { struct irq_host *host; @@ -1025,7 +1071,7 @@ void irq_free_virt(unsigned int virq, unsigned int count) smp_wmb(); irq_map[i].host = NULL; } - spin_unlock_irqrestore(&irq_big_lock, flags); + raw_spin_unlock_irqrestore(&irq_big_lock, flags); } int arch_early_irq_init(void) diff --git a/arch/powerpc/kernel/kgdb.c b/arch/powerpc/kernel/kgdb.c index b6bd1eaa1c2..41bada0298c 100644 --- a/arch/powerpc/kernel/kgdb.c +++ b/arch/powerpc/kernel/kgdb.c @@ -333,7 +333,7 @@ int kgdb_arch_handle_exception(int vector, int signo, int err_code, atomic_set(&kgdb_cpu_doing_single_step, -1); /* set the trace bit if we're stepping */ if (remcom_in_buffer[0] == 's') { -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); linux_regs->msr |= MSR_DE; diff --git a/arch/powerpc/kernel/kprobes.c b/arch/powerpc/kernel/kprobes.c index c9329786073..3fd1af90211 100644 --- a/arch/powerpc/kernel/kprobes.c +++ b/arch/powerpc/kernel/kprobes.c @@ -36,7 +36,7 @@ #include <asm/uaccess.h> #include <asm/system.h> -#ifdef CONFIG_BOOKE +#ifdef CONFIG_PPC_ADV_DEBUG_REGS #define MSR_SINGLESTEP (MSR_DE) #else #define MSR_SINGLESTEP (MSR_SE) @@ -110,7 +110,7 @@ static void __kprobes prepare_singlestep(struct kprobe *p, struct pt_regs *regs) * like Decrementer or External Interrupt */ regs->msr &= ~MSR_EE; regs->msr |= MSR_SINGLESTEP; -#ifdef CONFIG_BOOKE +#ifdef CONFIG_PPC_ADV_DEBUG_REGS regs->msr &= ~MSR_CE; mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM); #endif diff --git a/arch/powerpc/kernel/lparcfg.c b/arch/powerpc/kernel/lparcfg.c index 79a00bb9c64..d09d1c61515 100644 --- a/arch/powerpc/kernel/lparcfg.c +++ b/arch/powerpc/kernel/lparcfg.c @@ -359,7 +359,7 @@ static void parse_system_parameter_string(struct seq_file *m) unsigned char *local_buffer = kmalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!local_buffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", + printk(KERN_ERR "%s %s kmalloc failure at line %d\n", __FILE__, __func__, __LINE__); return; } @@ -383,13 +383,13 @@ static void parse_system_parameter_string(struct seq_file *m) int idx, w_idx; char *workbuffer = kzalloc(SPLPAR_MAXLENGTH, GFP_KERNEL); if (!workbuffer) { - printk(KERN_ERR "%s %s kmalloc failure at line %d \n", + printk(KERN_ERR "%s %s kmalloc failure at line %d\n", __FILE__, __func__, __LINE__); kfree(local_buffer); return; } #ifdef LPARCFG_DEBUG - printk(KERN_INFO "success calling get-system-parameter \n"); + printk(KERN_INFO "success calling get-system-parameter\n"); #endif splpar_strlen = local_buffer[0] * 256 + local_buffer[1]; local_buffer += 2; /* step over strlen value */ @@ -440,7 +440,7 @@ static int lparcfg_count_active_processors(void) while ((cpus_dn = of_find_node_by_type(cpus_dn, "cpu"))) { #ifdef LPARCFG_DEBUG - printk(KERN_ERR "cpus_dn %p \n", cpus_dn); + printk(KERN_ERR "cpus_dn %p\n", cpus_dn); #endif count++; } @@ -725,7 +725,7 @@ static int lparcfg_data(struct seq_file *m, void *v) const unsigned int *lp_index_ptr; unsigned int lp_index = 0; - seq_printf(m, "%s %s \n", MODULE_NAME, MODULE_VERS); + seq_printf(m, "%s %s\n", MODULE_NAME, MODULE_VERS); rootdn = of_find_node_by_path("/"); if (rootdn) { diff --git a/arch/powerpc/kernel/nvram_64.c b/arch/powerpc/kernel/nvram_64.c index ad461e735ae..9cf197f01e9 100644 --- a/arch/powerpc/kernel/nvram_64.c +++ b/arch/powerpc/kernel/nvram_64.c @@ -338,8 +338,8 @@ static int __init nvram_create_os_partition(void) rc = nvram_write_header(new_part); if (rc <= 0) { - printk(KERN_ERR "nvram_create_os_partition: nvram_write_header \ - failed (%d)\n", rc); + printk(KERN_ERR "nvram_create_os_partition: nvram_write_header " + "failed (%d)\n", rc); return rc; } @@ -349,7 +349,7 @@ static int __init nvram_create_os_partition(void) rc = ppc_md.nvram_write((char *)&seq_init, sizeof(seq_init), &tmp_index); if (rc <= 0) { printk(KERN_ERR "nvram_create_os_partition: nvram_write " - "failed (%d)\n", rc); + "failed (%d)\n", rc); return rc; } diff --git a/arch/powerpc/kernel/pci_of_scan.c b/arch/powerpc/kernel/pci_of_scan.c index 4aa17401657..cd11d5ca80d 100644 --- a/arch/powerpc/kernel/pci_of_scan.c +++ b/arch/powerpc/kernel/pci_of_scan.c @@ -304,7 +304,7 @@ static void __devinit __of_scan_bus(struct device_node *node, int reglen, devfn; struct pci_dev *dev; - pr_debug("of_scan_bus(%s) bus no %d... \n", + pr_debug("of_scan_bus(%s) bus no %d...\n", node->full_name, bus->number); /* Scan direct children */ diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index 0516e2d3e02..461499b43cf 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -37,7 +37,7 @@ static void dummy_perf(struct pt_regs *regs) } -static DEFINE_SPINLOCK(pmc_owner_lock); +static DEFINE_RAW_SPINLOCK(pmc_owner_lock); static void *pmc_owner_caller; /* mostly for debugging */ perf_irq_t perf_irq = dummy_perf; @@ -45,7 +45,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq) { int err = 0; - spin_lock(&pmc_owner_lock); + raw_spin_lock(&pmc_owner_lock); if (pmc_owner_caller) { printk(KERN_WARNING "reserve_pmc_hardware: " @@ -59,21 +59,21 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq) perf_irq = new_perf_irq ? new_perf_irq : dummy_perf; out: - spin_unlock(&pmc_owner_lock); + raw_spin_unlock(&pmc_owner_lock); return err; } EXPORT_SYMBOL_GPL(reserve_pmc_hardware); void release_pmc_hardware(void) { - spin_lock(&pmc_owner_lock); + raw_spin_lock(&pmc_owner_lock); WARN_ON(! pmc_owner_caller); pmc_owner_caller = NULL; perf_irq = dummy_perf; - spin_unlock(&pmc_owner_lock); + raw_spin_unlock(&pmc_owner_lock); } EXPORT_SYMBOL_GPL(release_pmc_hardware); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7b816daf3eb..e4d71ced97e 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -245,6 +245,24 @@ void discard_lazy_cpu_state(void) } #endif /* CONFIG_SMP */ +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +void do_send_trap(struct pt_regs *regs, unsigned long address, + unsigned long error_code, int signal_code, int breakpt) +{ + siginfo_t info; + + if (notify_die(DIE_DABR_MATCH, "dabr_match", regs, error_code, + 11, SIGSEGV) == NOTIFY_STOP) + return; + + /* Deliver the signal to userspace */ + info.si_signo = SIGTRAP; + info.si_errno = breakpt; /* breakpoint or watchpoint id */ + info.si_code = signal_code; + info.si_addr = (void __user *)address; + force_sig_info(SIGTRAP, &info, current); +} +#else /* !CONFIG_PPC_ADV_DEBUG_REGS */ void do_dabr(struct pt_regs *regs, unsigned long address, unsigned long error_code) { @@ -257,12 +275,6 @@ void do_dabr(struct pt_regs *regs, unsigned long address, if (debugger_dabr_match(regs)) return; - /* Clear the DAC and struct entries. One shot trigger */ -#if defined(CONFIG_BOOKE) - mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | DBSR_DAC1W - | DBCR0_IDM)); -#endif - /* Clear the DABR */ set_dabr(0); @@ -273,9 +285,82 @@ void do_dabr(struct pt_regs *regs, unsigned long address, info.si_addr = (void __user *)address; force_sig_info(SIGTRAP, &info, current); } +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ static DEFINE_PER_CPU(unsigned long, current_dabr); +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +/* + * Set the debug registers back to their default "safe" values. + */ +static void set_debug_reg_defaults(struct thread_struct *thread) +{ + thread->iac1 = thread->iac2 = 0; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + thread->iac3 = thread->iac4 = 0; +#endif + thread->dac1 = thread->dac2 = 0; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + thread->dvc1 = thread->dvc2 = 0; +#endif + thread->dbcr0 = 0; +#ifdef CONFIG_BOOKE + /* + * Force User/Supervisor bits to b11 (user-only MSR[PR]=1) + */ + thread->dbcr1 = DBCR1_IAC1US | DBCR1_IAC2US | \ + DBCR1_IAC3US | DBCR1_IAC4US; + /* + * Force Data Address Compare User/Supervisor bits to be User-only + * (0b11 MSR[PR]=1) and set all other bits in DBCR2 register to be 0. + */ + thread->dbcr2 = DBCR2_DAC1US | DBCR2_DAC2US; +#else + thread->dbcr1 = 0; +#endif +} + +static void prime_debug_regs(struct thread_struct *thread) +{ + mtspr(SPRN_IAC1, thread->iac1); + mtspr(SPRN_IAC2, thread->iac2); +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + mtspr(SPRN_IAC3, thread->iac3); + mtspr(SPRN_IAC4, thread->iac4); +#endif + mtspr(SPRN_DAC1, thread->dac1); + mtspr(SPRN_DAC2, thread->dac2); +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + mtspr(SPRN_DVC1, thread->dvc1); + mtspr(SPRN_DVC2, thread->dvc2); +#endif + mtspr(SPRN_DBCR0, thread->dbcr0); + mtspr(SPRN_DBCR1, thread->dbcr1); +#ifdef CONFIG_BOOKE + mtspr(SPRN_DBCR2, thread->dbcr2); +#endif +} +/* + * Unless neither the old or new thread are making use of the + * debug registers, set the debug registers from the values + * stored in the new thread. + */ +static void switch_booke_debug_regs(struct thread_struct *new_thread) +{ + if ((current->thread.dbcr0 & DBCR0_IDM) + || (new_thread->dbcr0 & DBCR0_IDM)) + prime_debug_regs(new_thread); +} +#else /* !CONFIG_PPC_ADV_DEBUG_REGS */ +static void set_debug_reg_defaults(struct thread_struct *thread) +{ + if (thread->dabr) { + thread->dabr = 0; + set_dabr(0); + } +} +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ + int set_dabr(unsigned long dabr) { __get_cpu_var(current_dabr) = dabr; @@ -284,7 +369,7 @@ int set_dabr(unsigned long dabr) return ppc_md.set_dabr(dabr); /* XXX should we have a CPU_FTR_HAS_DABR ? */ -#if defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS mtspr(SPRN_DAC1, dabr); #elif defined(CONFIG_PPC_BOOK3S) mtspr(SPRN_DABR, dabr); @@ -371,10 +456,8 @@ struct task_struct *__switch_to(struct task_struct *prev, #endif /* CONFIG_SMP */ -#if defined(CONFIG_BOOKE) - /* If new thread DAC (HW breakpoint) is the same then leave it */ - if (new->thread.dabr) - set_dabr(new->thread.dabr); +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + switch_booke_debug_regs(&new->thread); #else if (unlikely(__get_cpu_var(current_dabr) != new->thread.dabr)) set_dabr(new->thread.dabr); @@ -514,7 +597,7 @@ void show_regs(struct pt_regs * regs) printk(" CR: %08lx XER: %08lx\n", regs->ccr, regs->xer); trap = TRAP(regs); if (trap == 0x300 || trap == 0x600) -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS printk("DEAR: "REG", ESR: "REG"\n", regs->dar, regs->dsisr); #else printk("DAR: "REG", DSISR: "REG"\n", regs->dar, regs->dsisr); @@ -556,14 +639,7 @@ void flush_thread(void) { discard_lazy_cpu_state(); - if (current->thread.dabr) { - current->thread.dabr = 0; - set_dabr(0); - -#if defined(CONFIG_BOOKE) - current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W); -#endif - } + set_debug_reg_defaults(¤t->thread); } void diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index bafac2e41ae..5f306c4946e 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -654,6 +654,9 @@ static void __init early_cmdline_parse(void) #define OV5_CMO 0x00 #endif +/* Option Vector 6: IBM PAPR hints */ +#define OV6_LINUX 0x02 /* Linux is our OS */ + /* * The architecture vector has an array of PVR mask/value pairs, * followed by # option vectors - 1, followed by the option vectors. @@ -665,7 +668,7 @@ static unsigned char ibm_architecture_vec[] = { W(0xffffffff), W(0x0f000003), /* all 2.06-compliant */ W(0xffffffff), W(0x0f000002), /* all 2.05-compliant */ W(0xfffffffe), W(0x0f000001), /* all 2.04-compliant and earlier */ - 5 - 1, /* 5 option vectors */ + 6 - 1, /* 6 option vectors */ /* option vector 1: processor architectures supported */ 3 - 2, /* length */ @@ -697,12 +700,29 @@ static unsigned char ibm_architecture_vec[] = { 0, /* don't halt */ /* option vector 5: PAPR/OF options */ - 5 - 2, /* length */ + 13 - 2, /* length */ 0, /* don't ignore, don't halt */ OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES | OV5_DRCONF_MEMORY | OV5_DONATE_DEDICATE_CPU | OV5_MSI, 0, OV5_CMO, + 0, + 0, + 0, + 0, + /* WARNING: The offset of the "number of cores" field below + * must match by the macro below. Update the definition if + * the structure layout changes. + */ +#define IBM_ARCH_VEC_NRCORES_OFFSET 100 + W(NR_CPUS), /* number of cores supported */ + + /* option vector 6: IBM PAPR hints */ + 4 - 2, /* length */ + 0, + 0, + OV6_LINUX, + }; /* Old method - ELF header with PT_NOTE sections */ @@ -792,13 +812,70 @@ static struct fake_elf { } }; +static int __init prom_count_smt_threads(void) +{ + phandle node; + char type[64]; + unsigned int plen; + + /* Pick up th first CPU node we can find */ + for (node = 0; prom_next_node(&node); ) { + type[0] = 0; + prom_getprop(node, "device_type", type, sizeof(type)); + + if (strcmp(type, RELOC("cpu"))) + continue; + /* + * There is an entry for each smt thread, each entry being + * 4 bytes long. All cpus should have the same number of + * smt threads, so return after finding the first. + */ + plen = prom_getproplen(node, "ibm,ppc-interrupt-server#s"); + if (plen == PROM_ERROR) + break; + plen >>= 2; + prom_debug("Found 0x%x smt threads per core\n", (unsigned long)plen); + + /* Sanity check */ + if (plen < 1 || plen > 64) { + prom_printf("Threads per core 0x%x out of bounds, assuming 1\n", + (unsigned long)plen); + return 1; + } + return plen; + } + prom_debug("No threads found, assuming 1 per core\n"); + + return 1; + +} + + static void __init prom_send_capabilities(void) { ihandle elfloader, root; prom_arg_t ret; + u32 *cores; root = call_prom("open", 1, 1, ADDR("/")); if (root != 0) { + /* We need to tell the FW about the number of cores we support. + * + * To do that, we count the number of threads on the first core + * (we assume this is the same for all cores) and use it to + * divide NR_CPUS. + */ + cores = (u32 *)PTRRELOC(&ibm_architecture_vec[IBM_ARCH_VEC_NRCORES_OFFSET]); + if (*cores != NR_CPUS) { + prom_printf("WARNING ! " + "ibm_architecture_vec structure inconsistent: 0x%x !\n", + *cores); + } else { + *cores = NR_CPUS / prom_count_smt_threads(); + prom_printf("Max number of cores passed to firmware: 0x%x\n", + (unsigned long)*cores); + } + /* try calling the ibm,client-architecture-support method */ prom_printf("Calling ibm,client-architecture-support..."); if (call_prom_ret("call-method", 3, 2, &ret, diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index ef149880c14..d9b05866615 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -46,7 +46,7 @@ /* * Set of msr bits that gdb can change on behalf of a process. */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS #define MSR_DEBUGCHANGE 0 #else #define MSR_DEBUGCHANGE (MSR_SE | MSR_BE) @@ -703,7 +703,7 @@ void user_enable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; if (regs != NULL) { -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS task->thread.dbcr0 &= ~DBCR0_BT; task->thread.dbcr0 |= DBCR0_IDM | DBCR0_IC; regs->msr |= MSR_DE; @@ -720,7 +720,7 @@ void user_enable_block_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; if (regs != NULL) { -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS task->thread.dbcr0 &= ~DBCR0_IC; task->thread.dbcr0 = DBCR0_IDM | DBCR0_BT; regs->msr |= MSR_DE; @@ -737,17 +737,25 @@ void user_disable_single_step(struct task_struct *task) struct pt_regs *regs = task->thread.regs; if (regs != NULL) { -#if defined(CONFIG_BOOKE) - /* If DAC don't clear DBCRO_IDM or MSR_DE */ - if (task->thread.dabr) - task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT); - else { - task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + /* + * The logic to disable single stepping should be as + * simple as turning off the Instruction Complete flag. + * And, after doing so, if all debug flags are off, turn + * off DBCR0(IDM) and MSR(DE) .... Torez + */ + task->thread.dbcr0 &= ~DBCR0_IC; + /* + * Test to see if any of the DBCR_ACTIVE_EVENTS bits are set. + */ + if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, + task->thread.dbcr1)) { + /* + * All debug events were off..... + */ + task->thread.dbcr0 &= ~DBCR0_IDM; regs->msr &= ~MSR_DE; } -#elif defined(CONFIG_40x) - task->thread.dbcr0 &= ~(DBCR0_IC | DBCR0_BT | DBCR0_IDM); - regs->msr &= ~MSR_DE; #else regs->msr &= ~(MSR_SE | MSR_BE); #endif @@ -769,8 +777,7 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, if ((data & ~0x7UL) >= TASK_SIZE) return -EIO; -#ifndef CONFIG_BOOKE - +#ifndef CONFIG_PPC_ADV_DEBUG_REGS /* For processors using DABR (i.e. 970), the bottom 3 bits are flags. * It was assumed, on previous implementations, that 3 bits were * passed together with the data address, fitting the design of the @@ -789,21 +796,22 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Move contents to the DABR register */ task->thread.dabr = data; - -#endif -#if defined(CONFIG_BOOKE) - +#else /* CONFIG_PPC_ADV_DEBUG_REGS */ /* As described above, it was assumed 3 bits were passed with the data * address, but we will assume only the mode bits will be passed * as to not cause alignment restrictions for DAC-based processors. */ /* DAC's hold the whole address without any mode flags */ - task->thread.dabr = data & ~0x3UL; - - if (task->thread.dabr == 0) { - task->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | DBCR0_IDM); - task->thread.regs->msr &= ~MSR_DE; + task->thread.dac1 = data & ~0x3UL; + + if (task->thread.dac1 == 0) { + dbcr_dac(task) &= ~(DBCR_DAC1R | DBCR_DAC1W); + if (!DBCR_ACTIVE_EVENTS(task->thread.dbcr0, + task->thread.dbcr1)) { + task->thread.regs->msr &= ~MSR_DE; + task->thread.dbcr0 &= ~DBCR0_IDM; + } return 0; } @@ -814,17 +822,17 @@ int ptrace_set_debugreg(struct task_struct *task, unsigned long addr, /* Set the Internal Debugging flag (IDM bit 1) for the DBCR0 register */ - task->thread.dbcr0 = DBCR0_IDM; + task->thread.dbcr0 |= DBCR0_IDM; /* Check for write and read flags and set DBCR0 accordingly */ + dbcr_dac(task) &= ~(DBCR_DAC1R|DBCR_DAC1W); if (data & 0x1UL) - task->thread.dbcr0 |= DBSR_DAC1R; + dbcr_dac(task) |= DBCR_DAC1R; if (data & 0x2UL) - task->thread.dbcr0 |= DBSR_DAC1W; - + dbcr_dac(task) |= DBCR_DAC1W; task->thread.regs->msr |= MSR_DE; -#endif +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ return 0; } @@ -839,6 +847,394 @@ void ptrace_disable(struct task_struct *child) user_disable_single_step(child); } +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +static long set_intruction_bp(struct task_struct *child, + struct ppc_hw_breakpoint *bp_info) +{ + int slot; + int slot1_in_use = ((child->thread.dbcr0 & DBCR0_IAC1) != 0); + int slot2_in_use = ((child->thread.dbcr0 & DBCR0_IAC2) != 0); + int slot3_in_use = ((child->thread.dbcr0 & DBCR0_IAC3) != 0); + int slot4_in_use = ((child->thread.dbcr0 & DBCR0_IAC4) != 0); + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) + slot2_in_use = 1; + if (dbcr_iac_range(child) & DBCR_IAC34MODE) + slot4_in_use = 1; + + if (bp_info->addr >= TASK_SIZE) + return -EIO; + + if (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) { + + /* Make sure range is valid. */ + if (bp_info->addr2 >= TASK_SIZE) + return -EIO; + + /* We need a pair of IAC regsisters */ + if ((!slot1_in_use) && (!slot2_in_use)) { + slot = 1; + child->thread.iac1 = bp_info->addr; + child->thread.iac2 = bp_info->addr2; + child->thread.dbcr0 |= DBCR0_IAC1; + if (bp_info->addr_mode == + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + dbcr_iac_range(child) |= DBCR_IAC12X; + else + dbcr_iac_range(child) |= DBCR_IAC12I; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + } else if ((!slot3_in_use) && (!slot4_in_use)) { + slot = 3; + child->thread.iac3 = bp_info->addr; + child->thread.iac4 = bp_info->addr2; + child->thread.dbcr0 |= DBCR0_IAC3; + if (bp_info->addr_mode == + PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + dbcr_iac_range(child) |= DBCR_IAC34X; + else + dbcr_iac_range(child) |= DBCR_IAC34I; +#endif + } else + return -ENOSPC; + } else { + /* We only need one. If possible leave a pair free in + * case a range is needed later + */ + if (!slot1_in_use) { + /* + * Don't use iac1 if iac1-iac2 are free and either + * iac3 or iac4 (but not both) are free + */ + if (slot2_in_use || (slot3_in_use == slot4_in_use)) { + slot = 1; + child->thread.iac1 = bp_info->addr; + child->thread.dbcr0 |= DBCR0_IAC1; + goto out; + } + } + if (!slot2_in_use) { + slot = 2; + child->thread.iac2 = bp_info->addr; + child->thread.dbcr0 |= DBCR0_IAC2; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + } else if (!slot3_in_use) { + slot = 3; + child->thread.iac3 = bp_info->addr; + child->thread.dbcr0 |= DBCR0_IAC3; + } else if (!slot4_in_use) { + slot = 4; + child->thread.iac4 = bp_info->addr; + child->thread.dbcr0 |= DBCR0_IAC4; +#endif + } else + return -ENOSPC; + } +out: + child->thread.dbcr0 |= DBCR0_IDM; + child->thread.regs->msr |= MSR_DE; + + return slot; +} + +static int del_instruction_bp(struct task_struct *child, int slot) +{ + switch (slot) { + case 1: + if (child->thread.iac1 == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) { + /* address range - clear slots 1 & 2 */ + child->thread.iac2 = 0; + dbcr_iac_range(child) &= ~DBCR_IAC12MODE; + } + child->thread.iac1 = 0; + child->thread.dbcr0 &= ~DBCR0_IAC1; + break; + case 2: + if (child->thread.iac2 == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC12MODE) + /* used in a range */ + return -EINVAL; + child->thread.iac2 = 0; + child->thread.dbcr0 &= ~DBCR0_IAC2; + break; +#if CONFIG_PPC_ADV_DEBUG_IACS > 2 + case 3: + if (child->thread.iac3 == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC34MODE) { + /* address range - clear slots 3 & 4 */ + child->thread.iac4 = 0; + dbcr_iac_range(child) &= ~DBCR_IAC34MODE; + } + child->thread.iac3 = 0; + child->thread.dbcr0 &= ~DBCR0_IAC3; + break; + case 4: + if (child->thread.iac4 == 0) + return -ENOENT; + + if (dbcr_iac_range(child) & DBCR_IAC34MODE) + /* Used in a range */ + return -EINVAL; + child->thread.iac4 = 0; + child->thread.dbcr0 &= ~DBCR0_IAC4; + break; +#endif + default: + return -EINVAL; + } + return 0; +} + +static int set_dac(struct task_struct *child, struct ppc_hw_breakpoint *bp_info) +{ + int byte_enable = + (bp_info->condition_mode >> PPC_BREAKPOINT_CONDITION_BE_SHIFT) + & 0xf; + int condition_mode = + bp_info->condition_mode & PPC_BREAKPOINT_CONDITION_MODE; + int slot; + + if (byte_enable && (condition_mode == 0)) + return -EINVAL; + + if (bp_info->addr >= TASK_SIZE) + return -EIO; + + if ((dbcr_dac(child) & (DBCR_DAC1R | DBCR_DAC1W)) == 0) { + slot = 1; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + dbcr_dac(child) |= DBCR_DAC1R; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + dbcr_dac(child) |= DBCR_DAC1W; + child->thread.dac1 = (unsigned long)bp_info->addr; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + if (byte_enable) { + child->thread.dvc1 = + (unsigned long)bp_info->condition_value; + child->thread.dbcr2 |= + ((byte_enable << DBCR2_DVC1BE_SHIFT) | + (condition_mode << DBCR2_DVC1M_SHIFT)); + } +#endif +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + } else if (child->thread.dbcr2 & DBCR2_DAC12MODE) { + /* Both dac1 and dac2 are part of a range */ + return -ENOSPC; +#endif + } else if ((dbcr_dac(child) & (DBCR_DAC2R | DBCR_DAC2W)) == 0) { + slot = 2; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + dbcr_dac(child) |= DBCR_DAC2R; + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + dbcr_dac(child) |= DBCR_DAC2W; + child->thread.dac2 = (unsigned long)bp_info->addr; +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + if (byte_enable) { + child->thread.dvc2 = + (unsigned long)bp_info->condition_value; + child->thread.dbcr2 |= + ((byte_enable << DBCR2_DVC2BE_SHIFT) | + (condition_mode << DBCR2_DVC2M_SHIFT)); + } +#endif + } else + return -ENOSPC; + child->thread.dbcr0 |= DBCR0_IDM; + child->thread.regs->msr |= MSR_DE; + + return slot + 4; +} + +static int del_dac(struct task_struct *child, int slot) +{ + if (slot == 1) { + if (child->thread.dac1 == 0) + return -ENOENT; + + child->thread.dac1 = 0; + dbcr_dac(child) &= ~(DBCR_DAC1R | DBCR_DAC1W); +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + if (child->thread.dbcr2 & DBCR2_DAC12MODE) { + child->thread.dac2 = 0; + child->thread.dbcr2 &= ~DBCR2_DAC12MODE; + } + child->thread.dbcr2 &= ~(DBCR2_DVC1M | DBCR2_DVC1BE); +#endif +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + child->thread.dvc1 = 0; +#endif + } else if (slot == 2) { + if (child->thread.dac1 == 0) + return -ENOENT; + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + if (child->thread.dbcr2 & DBCR2_DAC12MODE) + /* Part of a range */ + return -EINVAL; + child->thread.dbcr2 &= ~(DBCR2_DVC2M | DBCR2_DVC2BE); +#endif +#if CONFIG_PPC_ADV_DEBUG_DVCS > 0 + child->thread.dvc2 = 0; +#endif + child->thread.dac2 = 0; + dbcr_dac(child) &= ~(DBCR_DAC2R | DBCR_DAC2W); + } else + return -EINVAL; + + return 0; +} +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE +static int set_dac_range(struct task_struct *child, + struct ppc_hw_breakpoint *bp_info) +{ + int mode = bp_info->addr_mode & PPC_BREAKPOINT_MODE_MASK; + + /* We don't allow range watchpoints to be used with DVC */ + if (bp_info->condition_mode) + return -EINVAL; + + /* + * Best effort to verify the address range. The user/supervisor bits + * prevent trapping in kernel space, but let's fail on an obvious bad + * range. The simple test on the mask is not fool-proof, and any + * exclusive range will spill over into kernel space. + */ + if (bp_info->addr >= TASK_SIZE) + return -EIO; + if (mode == PPC_BREAKPOINT_MODE_MASK) { + /* + * dac2 is a bitmask. Don't allow a mask that makes a + * kernel space address from a valid dac1 value + */ + if (~((unsigned long)bp_info->addr2) >= TASK_SIZE) + return -EIO; + } else { + /* + * For range breakpoints, addr2 must also be a valid address + */ + if (bp_info->addr2 >= TASK_SIZE) + return -EIO; + } + + if (child->thread.dbcr0 & + (DBCR0_DAC1R | DBCR0_DAC1W | DBCR0_DAC2R | DBCR0_DAC2W)) + return -ENOSPC; + + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_READ) + child->thread.dbcr0 |= (DBCR0_DAC1R | DBCR0_IDM); + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_WRITE) + child->thread.dbcr0 |= (DBCR0_DAC1W | DBCR0_IDM); + child->thread.dac1 = bp_info->addr; + child->thread.dac2 = bp_info->addr2; + if (mode == PPC_BREAKPOINT_MODE_RANGE_INCLUSIVE) + child->thread.dbcr2 |= DBCR2_DAC12M; + else if (mode == PPC_BREAKPOINT_MODE_RANGE_EXCLUSIVE) + child->thread.dbcr2 |= DBCR2_DAC12MX; + else /* PPC_BREAKPOINT_MODE_MASK */ + child->thread.dbcr2 |= DBCR2_DAC12MM; + child->thread.regs->msr |= MSR_DE; + + return 5; +} +#endif /* CONFIG_PPC_ADV_DEBUG_DAC_RANGE */ + +static long ppc_set_hwdebug(struct task_struct *child, + struct ppc_hw_breakpoint *bp_info) +{ + if (bp_info->version != 1) + return -ENOTSUPP; +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + /* + * Check for invalid flags and combinations + */ + if ((bp_info->trigger_type == 0) || + (bp_info->trigger_type & ~(PPC_BREAKPOINT_TRIGGER_EXECUTE | + PPC_BREAKPOINT_TRIGGER_RW)) || + (bp_info->addr_mode & ~PPC_BREAKPOINT_MODE_MASK) || + (bp_info->condition_mode & + ~(PPC_BREAKPOINT_CONDITION_MODE | + PPC_BREAKPOINT_CONDITION_BE_ALL))) + return -EINVAL; +#if CONFIG_PPC_ADV_DEBUG_DVCS == 0 + if (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE) + return -EINVAL; +#endif + + if (bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_EXECUTE) { + if ((bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_EXECUTE) || + (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)) + return -EINVAL; + return set_intruction_bp(child, bp_info); + } + if (bp_info->addr_mode == PPC_BREAKPOINT_MODE_EXACT) + return set_dac(child, bp_info); + +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + return set_dac_range(child, bp_info); +#else + return -EINVAL; +#endif +#else /* !CONFIG_PPC_ADV_DEBUG_DVCS */ + /* + * We only support one data breakpoint + */ + if (((bp_info->trigger_type & PPC_BREAKPOINT_TRIGGER_RW) == 0) || + ((bp_info->trigger_type & ~PPC_BREAKPOINT_TRIGGER_RW) != 0) || + (bp_info->trigger_type != PPC_BREAKPOINT_TRIGGER_WRITE) || + (bp_info->addr_mode != PPC_BREAKPOINT_MODE_EXACT) || + (bp_info->condition_mode != PPC_BREAKPOINT_CONDITION_NONE)) + return -EINVAL; + + if (child->thread.dabr) + return -ENOSPC; + + if ((unsigned long)bp_info->addr >= TASK_SIZE) + return -EIO; + + child->thread.dabr = (unsigned long)bp_info->addr; + + return 1; +#endif /* !CONFIG_PPC_ADV_DEBUG_DVCS */ +} + +static long ppc_del_hwdebug(struct task_struct *child, long addr, long data) +{ +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + int rc; + + if (data <= 4) + rc = del_instruction_bp(child, (int)data); + else + rc = del_dac(child, (int)data - 4); + + if (!rc) { + if (!DBCR_ACTIVE_EVENTS(child->thread.dbcr0, + child->thread.dbcr1)) { + child->thread.dbcr0 &= ~DBCR0_IDM; + child->thread.regs->msr &= ~MSR_DE; + } + } + return rc; +#else + if (data != 1) + return -EINVAL; + if (child->thread.dabr == 0) + return -ENOENT; + + child->thread.dabr = 0; + + return 0; +#endif +} + /* * Here are the old "legacy" powerpc specific getregs/setregs ptrace calls, * we mark them as obsolete now, they will be removed in a future version @@ -932,13 +1328,77 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } + case PPC_PTRACE_GETHWDBGINFO: { + struct ppc_debug_info dbginfo; + + dbginfo.version = 1; +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + dbginfo.num_instruction_bps = CONFIG_PPC_ADV_DEBUG_IACS; + dbginfo.num_data_bps = CONFIG_PPC_ADV_DEBUG_DACS; + dbginfo.num_condition_regs = CONFIG_PPC_ADV_DEBUG_DVCS; + dbginfo.data_bp_alignment = 4; + dbginfo.sizeof_condition = 4; + dbginfo.features = PPC_DEBUG_FEATURE_INSN_BP_RANGE | + PPC_DEBUG_FEATURE_INSN_BP_MASK; +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + dbginfo.features |= + PPC_DEBUG_FEATURE_DATA_BP_RANGE | + PPC_DEBUG_FEATURE_DATA_BP_MASK; +#endif +#else /* !CONFIG_PPC_ADV_DEBUG_REGS */ + dbginfo.num_instruction_bps = 0; + dbginfo.num_data_bps = 1; + dbginfo.num_condition_regs = 0; +#ifdef CONFIG_PPC64 + dbginfo.data_bp_alignment = 8; +#else + dbginfo.data_bp_alignment = 4; +#endif + dbginfo.sizeof_condition = 0; + dbginfo.features = 0; +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ + + if (!access_ok(VERIFY_WRITE, data, + sizeof(struct ppc_debug_info))) + return -EFAULT; + ret = __copy_to_user((struct ppc_debug_info __user *)data, + &dbginfo, sizeof(struct ppc_debug_info)) ? + -EFAULT : 0; + break; + } + + case PPC_PTRACE_SETHWDEBUG: { + struct ppc_hw_breakpoint bp_info; + + if (!access_ok(VERIFY_READ, data, + sizeof(struct ppc_hw_breakpoint))) + return -EFAULT; + ret = __copy_from_user(&bp_info, + (struct ppc_hw_breakpoint __user *)data, + sizeof(struct ppc_hw_breakpoint)) ? + -EFAULT : 0; + if (!ret) + ret = ppc_set_hwdebug(child, &bp_info); + break; + } + + case PPC_PTRACE_DELHWDEBUG: { + ret = ppc_del_hwdebug(child, addr, data); + break; + } + case PTRACE_GET_DEBUGREG: { ret = -EINVAL; /* We only support one DABR and no IABRS at the moment */ if (addr > 0) break; +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + ret = put_user(child->thread.dac1, + (unsigned long __user *)data); +#else ret = put_user(child->thread.dabr, (unsigned long __user *)data); +#endif break; } diff --git a/arch/powerpc/kernel/signal.c b/arch/powerpc/kernel/signal.c index 00b5078da9a..a0afb555a7c 100644 --- a/arch/powerpc/kernel/signal.c +++ b/arch/powerpc/kernel/signal.c @@ -140,17 +140,15 @@ static int do_signal_pending(sigset_t *oldset, struct pt_regs *regs) return 0; /* no signals delivered */ } +#ifndef CONFIG_PPC_ADV_DEBUG_REGS /* * Reenable the DABR before delivering the signal to * user space. The DABR will have been cleared if it * triggered inside the kernel. */ - if (current->thread.dabr) { + if (current->thread.dabr) set_dabr(current->thread.dabr); -#if defined(CONFIG_BOOKE) - mtspr(SPRN_DBCR0, current->thread.dbcr0); #endif - } if (is32) { if (ka.sa.sa_flags & SA_SIGINFO) diff --git a/arch/powerpc/kernel/signal_32.c b/arch/powerpc/kernel/signal_32.c index d670429a160..266610119f6 100644 --- a/arch/powerpc/kernel/signal_32.c +++ b/arch/powerpc/kernel/signal_32.c @@ -1078,7 +1078,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, int i; unsigned char tmp; unsigned long new_msr = regs->msr; -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS unsigned long new_dbcr0 = current->thread.dbcr0; #endif @@ -1087,13 +1087,17 @@ int sys_debug_setcontext(struct ucontext __user *ctx, return -EFAULT; switch (op.dbg_type) { case SIG_DBG_SINGLE_STEPPING: -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS if (op.dbg_value) { new_msr |= MSR_DE; new_dbcr0 |= (DBCR0_IDM | DBCR0_IC); } else { - new_msr &= ~MSR_DE; - new_dbcr0 &= ~(DBCR0_IDM | DBCR0_IC); + new_dbcr0 &= ~DBCR0_IC; + if (!DBCR_ACTIVE_EVENTS(new_dbcr0, + current->thread.dbcr1)) { + new_msr &= ~MSR_DE; + new_dbcr0 &= ~DBCR0_IDM; + } } #else if (op.dbg_value) @@ -1103,7 +1107,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, #endif break; case SIG_DBG_BRANCH_TRACING: -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS return -EINVAL; #else if (op.dbg_value) @@ -1124,7 +1128,7 @@ int sys_debug_setcontext(struct ucontext __user *ctx, failure is a problem, anyway, and it's very unlikely unless the user is really doing something wrong. */ regs->msr = new_msr; -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS current->thread.dbcr0 = new_dbcr0; #endif diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 6c6093d67f3..1b16b9a3e49 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -265,8 +265,8 @@ void account_system_vtime(struct task_struct *tsk) account_system_time(tsk, 0, delta, deltascaled); else account_idle_time(delta); - per_cpu(cputime_last_delta, smp_processor_id()) = delta; - per_cpu(cputime_scaled_last_delta, smp_processor_id()) = deltascaled; + __get_cpu_var(cputime_last_delta) = delta; + __get_cpu_var(cputime_scaled_last_delta) = deltascaled; local_irq_restore(flags); } EXPORT_SYMBOL_GPL(account_system_vtime); @@ -575,6 +575,8 @@ void timer_interrupt(struct pt_regs * regs) trace_timer_interrupt_entry(regs); + __get_cpu_var(irq_stat).timer_irqs++; + /* Ensure a positive value is written to the decrementer, or else * some CPUs will continuue to take decrementer exceptions */ set_dec(DECREMENTER_MAX); @@ -935,8 +937,8 @@ static void register_decrementer_clockevent(int cpu) *dec = decrementer_clockevent; dec->cpumask = cpumask_of(cpu); - printk(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n", - dec->name, dec->mult, dec->shift, cpu); + printk_once(KERN_DEBUG "clockevent: %s mult[%x] shift[%d] cpu[%d]\n", + dec->name, dec->mult, dec->shift, cpu); clockevents_register_device(dec); } diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index d069ff8a7e0..696626a2e83 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -60,13 +60,13 @@ #endif #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) -int (*__debugger)(struct pt_regs *regs); -int (*__debugger_ipi)(struct pt_regs *regs); -int (*__debugger_bpt)(struct pt_regs *regs); -int (*__debugger_sstep)(struct pt_regs *regs); -int (*__debugger_iabr_match)(struct pt_regs *regs); -int (*__debugger_dabr_match)(struct pt_regs *regs); -int (*__debugger_fault_handler)(struct pt_regs *regs); +int (*__debugger)(struct pt_regs *regs) __read_mostly; +int (*__debugger_ipi)(struct pt_regs *regs) __read_mostly; +int (*__debugger_bpt)(struct pt_regs *regs) __read_mostly; +int (*__debugger_sstep)(struct pt_regs *regs) __read_mostly; +int (*__debugger_iabr_match)(struct pt_regs *regs) __read_mostly; +int (*__debugger_dabr_match)(struct pt_regs *regs) __read_mostly; +int (*__debugger_fault_handler)(struct pt_regs *regs) __read_mostly; EXPORT_SYMBOL(__debugger); EXPORT_SYMBOL(__debugger_ipi); @@ -102,11 +102,11 @@ static inline void pmac_backlight_unblank(void) { } int die(const char *str, struct pt_regs *regs, long err) { static struct { - spinlock_t lock; + raw_spinlock_t lock; u32 lock_owner; int lock_owner_depth; } die = { - .lock = __SPIN_LOCK_UNLOCKED(die.lock), + .lock = __RAW_SPIN_LOCK_UNLOCKED(die.lock), .lock_owner = -1, .lock_owner_depth = 0 }; @@ -120,7 +120,7 @@ int die(const char *str, struct pt_regs *regs, long err) if (die.lock_owner != raw_smp_processor_id()) { console_verbose(); - spin_lock_irqsave(&die.lock, flags); + raw_spin_lock_irqsave(&die.lock, flags); die.lock_owner = smp_processor_id(); die.lock_owner_depth = 0; bust_spinlocks(1); @@ -146,6 +146,11 @@ int die(const char *str, struct pt_regs *regs, long err) #endif printk("%s\n", ppc_md.name ? ppc_md.name : ""); + sysfs_printk_last_file(); + if (notify_die(DIE_OOPS, str, regs, err, 255, + SIGSEGV) == NOTIFY_STOP) + return 1; + print_modules(); show_regs(regs); } else { @@ -155,7 +160,7 @@ int die(const char *str, struct pt_regs *regs, long err) bust_spinlocks(0); die.lock_owner = -1; add_taint(TAINT_DIE); - spin_unlock_irqrestore(&die.lock, flags); + raw_spin_unlock_irqrestore(&die.lock, flags); if (kexec_should_crash(current) || kexec_sr_activated(smp_processor_id())) @@ -294,7 +299,7 @@ static inline int check_io_access(struct pt_regs *regs) return 0; } -#if defined(CONFIG_4xx) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS /* On 4xx, the reason for the machine check or program exception is in the ESR. */ #define get_reason(regs) ((regs)->dsisr) @@ -478,6 +483,8 @@ void machine_check_exception(struct pt_regs *regs) { int recover = 0; + __get_cpu_var(irq_stat).mce_exceptions++; + /* See if any machine dependent calls. In theory, we would want * to call the CPU first, and call the ppc_md. one if the CPU * one returns a positive number. However there is existing code @@ -960,6 +967,8 @@ void vsx_unavailable_exception(struct pt_regs *regs) void performance_monitor_exception(struct pt_regs *regs) { + __get_cpu_var(irq_stat).pmu_irqs++; + perf_irq(regs); } @@ -1024,10 +1033,69 @@ void SoftwareEmulation(struct pt_regs *regs) } #endif /* CONFIG_8xx */ -#if defined(CONFIG_40x) || defined(CONFIG_BOOKE) +#ifdef CONFIG_PPC_ADV_DEBUG_REGS +static void handle_debug(struct pt_regs *regs, unsigned long debug_status) +{ + int changed = 0; + /* + * Determine the cause of the debug event, clear the + * event flags and send a trap to the handler. Torez + */ + if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { + dbcr_dac(current) &= ~(DBCR_DAC1R | DBCR_DAC1W); +#ifdef CONFIG_PPC_ADV_DEBUG_DAC_RANGE + current->thread.dbcr2 &= ~DBCR2_DAC12MODE; +#endif + do_send_trap(regs, mfspr(SPRN_DAC1), debug_status, TRAP_HWBKPT, + 5); + changed |= 0x01; + } else if (debug_status & (DBSR_DAC2R | DBSR_DAC2W)) { + dbcr_dac(current) &= ~(DBCR_DAC2R | DBCR_DAC2W); + do_send_trap(regs, mfspr(SPRN_DAC2), debug_status, TRAP_HWBKPT, + 6); + changed |= 0x01; + } else if (debug_status & DBSR_IAC1) { + current->thread.dbcr0 &= ~DBCR0_IAC1; + dbcr_iac_range(current) &= ~DBCR_IAC12MODE; + do_send_trap(regs, mfspr(SPRN_IAC1), debug_status, TRAP_HWBKPT, + 1); + changed |= 0x01; + } else if (debug_status & DBSR_IAC2) { + current->thread.dbcr0 &= ~DBCR0_IAC2; + do_send_trap(regs, mfspr(SPRN_IAC2), debug_status, TRAP_HWBKPT, + 2); + changed |= 0x01; + } else if (debug_status & DBSR_IAC3) { + current->thread.dbcr0 &= ~DBCR0_IAC3; + dbcr_iac_range(current) &= ~DBCR_IAC34MODE; + do_send_trap(regs, mfspr(SPRN_IAC3), debug_status, TRAP_HWBKPT, + 3); + changed |= 0x01; + } else if (debug_status & DBSR_IAC4) { + current->thread.dbcr0 &= ~DBCR0_IAC4; + do_send_trap(regs, mfspr(SPRN_IAC4), debug_status, TRAP_HWBKPT, + 4); + changed |= 0x01; + } + /* + * At the point this routine was called, the MSR(DE) was turned off. + * Check all other debug flags and see if that bit needs to be turned + * back on or not. + */ + if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, current->thread.dbcr1)) + regs->msr |= MSR_DE; + else + /* Make sure the IDM flag is off */ + current->thread.dbcr0 &= ~DBCR0_IDM; + + if (changed & 0x01) + mtspr(SPRN_DBCR0, current->thread.dbcr0); +} void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) { + current->thread.dbsr = debug_status; + /* Hack alert: On BookE, Branch Taken stops on the branch itself, while * on server, it stops on the target of the branch. In order to simulate * the server behaviour, we thus restart right away with a single step @@ -1071,29 +1139,23 @@ void __kprobes DebugException(struct pt_regs *regs, unsigned long debug_status) if (debugger_sstep(regs)) return; - if (user_mode(regs)) - current->thread.dbcr0 &= ~(DBCR0_IC); - - _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); - } else if (debug_status & (DBSR_DAC1R | DBSR_DAC1W)) { - regs->msr &= ~MSR_DE; - if (user_mode(regs)) { - current->thread.dbcr0 &= ~(DBSR_DAC1R | DBSR_DAC1W | - DBCR0_IDM); - } else { - /* Disable DAC interupts */ - mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) & ~(DBSR_DAC1R | - DBSR_DAC1W | DBCR0_IDM)); - - /* Clear the DAC event */ - mtspr(SPRN_DBSR, (DBSR_DAC1R | DBSR_DAC1W)); + current->thread.dbcr0 &= ~DBCR0_IC; +#ifdef CONFIG_PPC_ADV_DEBUG_REGS + if (DBCR_ACTIVE_EVENTS(current->thread.dbcr0, + current->thread.dbcr1)) + regs->msr |= MSR_DE; + else + /* Make sure the IDM bit is off */ + current->thread.dbcr0 &= ~DBCR0_IDM; +#endif } - /* Setup and send the trap to the handler */ - do_dabr(regs, mfspr(SPRN_DAC1), debug_status); - } + + _exception(SIGTRAP, regs, TRAP_TRACE, regs->nip); + } else + handle_debug(regs, debug_status); } -#endif /* CONFIG_4xx || CONFIG_BOOKE */ +#endif /* CONFIG_PPC_ADV_DEBUG_REGS */ #if !defined(CONFIG_TAU_INT) void TAUException(struct pt_regs *regs) diff --git a/arch/powerpc/lib/copypage_64.S b/arch/powerpc/lib/copypage_64.S index e68beac0a17..4d4eeb90048 100644 --- a/arch/powerpc/lib/copypage_64.S +++ b/arch/powerpc/lib/copypage_64.S @@ -43,62 +43,62 @@ END_FTR_SECTION_IFSET(CPU_FTR_CP_USE_DCBTZ) ld r7,16(r4) ldu r8,24(r4) 1: std r5,8(r3) - ld r9,8(r4) std r6,16(r3) + ld r9,8(r4) ld r10,16(r4) std r7,24(r3) - ld r11,24(r4) std r8,32(r3) + ld r11,24(r4) ld r12,32(r4) std r9,40(r3) - ld r5,40(r4) std r10,48(r3) + ld r5,40(r4) ld r6,48(r4) std r11,56(r3) - ld r7,56(r4) std r12,64(r3) + ld r7,56(r4) ld r8,64(r4) std r5,72(r3) - ld r9,72(r4) std r6,80(r3) + ld r9,72(r4) ld r10,80(r4) std r7,88(r3) - ld r11,88(r4) std r8,96(r3) + ld r11,88(r4) ld r12,96(r4) std r9,104(r3) - ld r5,104(r4) std r10,112(r3) + ld r5,104(r4) ld r6,112(r4) std r11,120(r3) - ld r7,120(r4) stdu r12,128(r3) + ld r7,120(r4) ldu r8,128(r4) bdnz 1b std r5,8(r3) - ld r9,8(r4) std r6,16(r3) + ld r9,8(r4) ld r10,16(r4) std r7,24(r3) - ld r11,24(r4) std r8,32(r3) + ld r11,24(r4) ld r12,32(r4) std r9,40(r3) - ld r5,40(r4) std r10,48(r3) + ld r5,40(r4) ld r6,48(r4) std r11,56(r3) - ld r7,56(r4) std r12,64(r3) + ld r7,56(r4) ld r8,64(r4) std r5,72(r3) - ld r9,72(r4) std r6,80(r3) + ld r9,72(r4) ld r10,80(r4) std r7,88(r3) - ld r11,88(r4) std r8,96(r3) + ld r11,88(r4) ld r12,96(r4) std r9,104(r3) std r10,112(r3) diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S index 693b14a778f..578b625d6a3 100644 --- a/arch/powerpc/lib/copyuser_64.S +++ b/arch/powerpc/lib/copyuser_64.S @@ -44,37 +44,55 @@ BEGIN_FTR_SECTION andi. r0,r4,7 bne .Lsrc_unaligned END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) - srdi r7,r5,4 -20: ld r9,0(r4) - addi r4,r4,-8 - mtctr r7 - andi. r5,r5,7 - bf cr7*4+0,22f - addi r3,r3,8 - addi r4,r4,8 - mr r8,r9 - blt cr1,72f -21: ld r9,8(r4) -70: std r8,8(r3) -22: ldu r8,16(r4) -71: stdu r9,16(r3) + blt cr1,.Ldo_tail /* if < 16 bytes to copy */ + srdi r0,r5,5 + cmpdi cr1,r0,0 +20: ld r7,0(r4) +220: ld r6,8(r4) + addi r4,r4,16 + mtctr r0 + andi. r0,r5,0x10 + beq 22f + addi r3,r3,16 + addi r4,r4,-16 + mr r9,r7 + mr r8,r6 + beq cr1,72f +21: ld r7,16(r4) +221: ld r6,24(r4) + addi r4,r4,32 +70: std r9,0(r3) +270: std r8,8(r3) +22: ld r9,0(r4) +222: ld r8,8(r4) +71: std r7,16(r3) +271: std r6,24(r3) + addi r3,r3,32 bdnz 21b -72: std r8,8(r3) +72: std r9,0(r3) +272: std r8,8(r3) + andi. r5,r5,0xf beq+ 3f - addi r3,r3,16 + addi r4,r4,16 .Ldo_tail: - bf cr7*4+1,1f -23: lwz r9,8(r4) + addi r3,r3,16 + bf cr7*4+0,246f +244: ld r9,0(r4) + addi r4,r4,8 +245: std r9,0(r3) + addi r3,r3,8 +246: bf cr7*4+1,1f +23: lwz r9,0(r4) addi r4,r4,4 73: stw r9,0(r3) addi r3,r3,4 1: bf cr7*4+2,2f -44: lhz r9,8(r4) +44: lhz r9,0(r4) addi r4,r4,2 74: sth r9,0(r3) addi r3,r3,2 2: bf cr7*4+3,3f -45: lbz r9,8(r4) +45: lbz r9,0(r4) 75: stb r9,0(r3) 3: li r3,0 blr @@ -220,7 +238,9 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 131: addi r3,r3,8 120: +320: 122: +322: 124: 125: 126: @@ -229,9 +249,11 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 129: 133: addi r3,r3,8 -121: 132: addi r3,r3,8 +121: +321: +344: 134: 135: 138: @@ -303,18 +325,22 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) 183: add r3,r3,r7 b 1f +371: 180: addi r3,r3,8 171: 177: addi r3,r3,8 -170: -172: +370: +372: 176: 178: addi r3,r3,4 185: addi r3,r3,4 +170: +172: +345: 173: 174: 175: @@ -341,11 +367,19 @@ END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD) .section __ex_table,"a" .align 3 .llong 20b,120b + .llong 220b,320b .llong 21b,121b + .llong 221b,321b .llong 70b,170b + .llong 270b,370b .llong 22b,122b + .llong 222b,322b .llong 71b,171b + .llong 271b,371b .llong 72b,172b + .llong 272b,372b + .llong 244b,344b + .llong 245b,345b .llong 23b,123b .llong 73b,173b .llong 44b,144b diff --git a/arch/powerpc/lib/feature-fixups.c b/arch/powerpc/lib/feature-fixups.c index 7e8865bcd68..e640175b65a 100644 --- a/arch/powerpc/lib/feature-fixups.c +++ b/arch/powerpc/lib/feature-fixups.c @@ -112,7 +112,8 @@ void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) void do_lwsync_fixups(unsigned long value, void *fixup_start, void *fixup_end) { - unsigned int *start, *end, *dest; + long *start, *end; + unsigned int *dest; if (!(value & CPU_FTR_LWSYNC)) return ; diff --git a/arch/powerpc/mm/40x_mmu.c b/arch/powerpc/mm/40x_mmu.c index 08dfa8e6d86..65abfcfaaa9 100644 --- a/arch/powerpc/mm/40x_mmu.c +++ b/arch/powerpc/mm/40x_mmu.c @@ -84,8 +84,8 @@ void __init MMU_init_hw(void) * vectors and the kernel live in real-mode. */ - mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */ - mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */ + mtspr(SPRN_DCCR, 0xFFFF0000); /* 2GByte of data space at 0x0. */ + mtspr(SPRN_ICCR, 0xFFFF0000); /* 2GByte of instr. space at 0x0. */ } #define LARGE_PAGE_SIZE_16M (1<<24) diff --git a/arch/powerpc/mm/hash_native_64.c b/arch/powerpc/mm/hash_native_64.c index 056d23a1b10..784a400e078 100644 --- a/arch/powerpc/mm/hash_native_64.c +++ b/arch/powerpc/mm/hash_native_64.c @@ -37,7 +37,7 @@ #define HPTE_LOCK_BIT 3 -static DEFINE_SPINLOCK(native_tlbie_lock); +static DEFINE_RAW_SPINLOCK(native_tlbie_lock); static inline void __tlbie(unsigned long va, int psize, int ssize) { @@ -104,7 +104,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local) if (use_local) use_local = mmu_psize_defs[psize].tlbiel; if (lock_tlbie && !use_local) - spin_lock(&native_tlbie_lock); + raw_spin_lock(&native_tlbie_lock); asm volatile("ptesync": : :"memory"); if (use_local) { __tlbiel(va, psize, ssize); @@ -114,7 +114,7 @@ static inline void tlbie(unsigned long va, int psize, int ssize, int local) asm volatile("eieio; tlbsync; ptesync": : :"memory"); } if (lock_tlbie && !use_local) - spin_unlock(&native_tlbie_lock); + raw_spin_unlock(&native_tlbie_lock); } static inline void native_lock_hpte(struct hash_pte *hptep) @@ -122,7 +122,7 @@ static inline void native_lock_hpte(struct hash_pte *hptep) unsigned long *word = &hptep->v; while (1) { - if (!test_and_set_bit(HPTE_LOCK_BIT, word)) + if (!test_and_set_bit_lock(HPTE_LOCK_BIT, word)) break; while(test_bit(HPTE_LOCK_BIT, word)) cpu_relax(); @@ -133,8 +133,7 @@ static inline void native_unlock_hpte(struct hash_pte *hptep) { unsigned long *word = &hptep->v; - asm volatile("lwsync":::"memory"); - clear_bit(HPTE_LOCK_BIT, word); + clear_bit_unlock(HPTE_LOCK_BIT, word); } static long native_hpte_insert(unsigned long hpte_group, unsigned long va, @@ -434,7 +433,7 @@ static void native_hpte_clear(void) /* we take the tlbie lock and hold it. Some hardware will * deadlock if we try to tlbie from two processors at once. */ - spin_lock(&native_tlbie_lock); + raw_spin_lock(&native_tlbie_lock); slots = pteg_count * HPTES_PER_GROUP; @@ -458,7 +457,7 @@ static void native_hpte_clear(void) } asm volatile("eieio; tlbsync; ptesync":::"memory"); - spin_unlock(&native_tlbie_lock); + raw_spin_unlock(&native_tlbie_lock); local_irq_restore(flags); } @@ -521,7 +520,7 @@ static void native_flush_hash_range(unsigned long number, int local) int lock_tlbie = !cpu_has_feature(CPU_FTR_LOCKLESS_TLBIE); if (lock_tlbie) - spin_lock(&native_tlbie_lock); + raw_spin_lock(&native_tlbie_lock); asm volatile("ptesync":::"memory"); for (i = 0; i < number; i++) { @@ -536,7 +535,7 @@ static void native_flush_hash_range(unsigned long number, int local) asm volatile("eieio; tlbsync; ptesync":::"memory"); if (lock_tlbie) - spin_unlock(&native_tlbie_lock); + raw_spin_unlock(&native_tlbie_lock); } local_irq_restore(flags); diff --git a/arch/powerpc/mm/mmu_context_hash64.c b/arch/powerpc/mm/mmu_context_hash64.c index b910d37aea1..51622daae09 100644 --- a/arch/powerpc/mm/mmu_context_hash64.c +++ b/arch/powerpc/mm/mmu_context_hash64.c @@ -23,7 +23,7 @@ #include <asm/mmu_context.h> static DEFINE_SPINLOCK(mmu_context_lock); -static DEFINE_IDR(mmu_context_idr); +static DEFINE_IDA(mmu_context_ida); /* * The proto-VSID space has 2^35 - 1 segments available for user mappings. @@ -39,11 +39,11 @@ int __init_new_context(void) int err; again: - if (!idr_pre_get(&mmu_context_idr, GFP_KERNEL)) + if (!ida_pre_get(&mmu_context_ida, GFP_KERNEL)) return -ENOMEM; spin_lock(&mmu_context_lock); - err = idr_get_new_above(&mmu_context_idr, NULL, 1, &index); + err = ida_get_new_above(&mmu_context_ida, 1, &index); spin_unlock(&mmu_context_lock); if (err == -EAGAIN) @@ -53,7 +53,7 @@ again: if (index > MAX_CONTEXT) { spin_lock(&mmu_context_lock); - idr_remove(&mmu_context_idr, index); + ida_remove(&mmu_context_ida, index); spin_unlock(&mmu_context_lock); return -ENOMEM; } @@ -85,7 +85,7 @@ int init_new_context(struct task_struct *tsk, struct mm_struct *mm) void __destroy_context(int context_id) { spin_lock(&mmu_context_lock); - idr_remove(&mmu_context_idr, context_id); + ida_remove(&mmu_context_ida, context_id); spin_unlock(&mmu_context_lock); } EXPORT_SYMBOL_GPL(__destroy_context); diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c index 1044a634b6d..dbc692145ec 100644 --- a/arch/powerpc/mm/mmu_context_nohash.c +++ b/arch/powerpc/mm/mmu_context_nohash.c @@ -56,7 +56,7 @@ static unsigned int next_context, nr_free_contexts; static unsigned long *context_map; static unsigned long *stale_map[NR_CPUS]; static struct mm_struct **context_mm; -static DEFINE_SPINLOCK(context_lock); +static DEFINE_RAW_SPINLOCK(context_lock); #define CTX_MAP_SIZE \ (sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1)) @@ -121,9 +121,9 @@ static unsigned int steal_context_smp(unsigned int id) /* This will happen if you have more CPUs than available contexts, * all we can do here is wait a bit and try again */ - spin_unlock(&context_lock); + raw_spin_unlock(&context_lock); cpu_relax(); - spin_lock(&context_lock); + raw_spin_lock(&context_lock); /* This will cause the caller to try again */ return MMU_NO_CONTEXT; @@ -194,7 +194,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) unsigned long *map; /* No lockless fast path .. yet */ - spin_lock(&context_lock); + raw_spin_lock(&context_lock); pr_hard("[%d] activating context for mm @%p, active=%d, id=%d", cpu, next, next->context.active, next->context.id); @@ -278,7 +278,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next) /* Flick the MMU and release lock */ pr_hardcont(" -> %d\n", id); set_context(id, next->pgd); - spin_unlock(&context_lock); + raw_spin_unlock(&context_lock); } /* @@ -307,7 +307,7 @@ void destroy_context(struct mm_struct *mm) WARN_ON(mm->context.active != 0); - spin_lock_irqsave(&context_lock, flags); + raw_spin_lock_irqsave(&context_lock, flags); id = mm->context.id; if (id != MMU_NO_CONTEXT) { __clear_bit(id, context_map); @@ -318,7 +318,7 @@ void destroy_context(struct mm_struct *mm) context_mm[id] = NULL; nr_free_contexts++; } - spin_unlock_irqrestore(&context_lock, flags); + raw_spin_unlock_irqrestore(&context_lock, flags); } #ifdef CONFIG_SMP diff --git a/arch/powerpc/mm/tlb_low_64e.S b/arch/powerpc/mm/tlb_low_64e.S index f288279e679..8b04c54e596 100644 --- a/arch/powerpc/mm/tlb_low_64e.S +++ b/arch/powerpc/mm/tlb_low_64e.S @@ -1,5 +1,5 @@ /* - * Low leve TLB miss handlers for Book3E + * Low level TLB miss handlers for Book3E * * Copyright (C) 2008-2009 * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. diff --git a/arch/powerpc/mm/tlb_nohash.c b/arch/powerpc/mm/tlb_nohash.c index 2fbc680c2c7..e81d5d67f83 100644 --- a/arch/powerpc/mm/tlb_nohash.c +++ b/arch/powerpc/mm/tlb_nohash.c @@ -150,7 +150,7 @@ EXPORT_SYMBOL(local_flush_tlb_page); */ #ifdef CONFIG_SMP -static DEFINE_SPINLOCK(tlbivax_lock); +static DEFINE_RAW_SPINLOCK(tlbivax_lock); static int mm_is_core_local(struct mm_struct *mm) { @@ -232,10 +232,10 @@ void __flush_tlb_page(struct mm_struct *mm, unsigned long vmaddr, if (mmu_has_feature(MMU_FTR_USE_TLBIVAX_BCAST)) { int lock = mmu_has_feature(MMU_FTR_LOCK_BCAST_INVAL); if (lock) - spin_lock(&tlbivax_lock); + raw_spin_lock(&tlbivax_lock); _tlbivax_bcast(vmaddr, pid, tsize, ind); if (lock) - spin_unlock(&tlbivax_lock); + raw_spin_unlock(&tlbivax_lock); goto bail; } else { struct tlb_flush_param p = { diff --git a/arch/powerpc/platforms/512x/clock.c b/arch/powerpc/platforms/512x/clock.c index 84544d07204..4c42246b86a 100644 --- a/arch/powerpc/platforms/512x/clock.c +++ b/arch/powerpc/platforms/512x/clock.c @@ -698,8 +698,7 @@ static struct clk_interface mpc5121_clk_functions = { .clk_get_parent = NULL, }; -static int -mpc5121_clk_init(void) +int __init mpc5121_clk_init(void) { struct device_node *np; @@ -724,6 +723,3 @@ mpc5121_clk_init(void) clk_functions = mpc5121_clk_functions; return 0; } - - -arch_initcall(mpc5121_clk_init); diff --git a/arch/powerpc/platforms/512x/mpc5121_ads.c b/arch/powerpc/platforms/512x/mpc5121_ads.c index 441abc48885..ee6ae129c25 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads.c @@ -64,8 +64,9 @@ define_machine(mpc5121_ads) { .name = "MPC5121 ADS", .probe = mpc5121_ads_probe, .setup_arch = mpc5121_ads_setup_arch, - .init = mpc512x_declare_of_platform_devices, + .init = mpc512x_init, .init_IRQ = mpc5121_ads_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, }; diff --git a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c index da9b20a6376..4ecf4cf9a51 100644 --- a/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c +++ b/arch/powerpc/platforms/512x/mpc5121_ads_cpld.c @@ -79,7 +79,7 @@ cpld_unmask_irq(unsigned int irq) } static struct irq_chip cpld_pic = { - .name = " CPLD PIC ", + .name = "CPLD PIC", .mask = cpld_mask_irq, .ack = cpld_mask_irq, .unmask = cpld_unmask_irq, diff --git a/arch/powerpc/platforms/512x/mpc5121_generic.c b/arch/powerpc/platforms/512x/mpc5121_generic.c index 2479de9e2d1..a6c0e3a2615 100644 --- a/arch/powerpc/platforms/512x/mpc5121_generic.c +++ b/arch/powerpc/platforms/512x/mpc5121_generic.c @@ -51,8 +51,9 @@ static int __init mpc5121_generic_probe(void) define_machine(mpc5121_generic) { .name = "MPC5121 generic", .probe = mpc5121_generic_probe, - .init = mpc512x_declare_of_platform_devices, + .init = mpc512x_init, .init_IRQ = mpc512x_init_IRQ, .get_irq = ipic_get_irq, .calibrate_decr = generic_calibrate_decr, + .restart = mpc512x_restart, }; diff --git a/arch/powerpc/platforms/512x/mpc512x.h b/arch/powerpc/platforms/512x/mpc512x.h index 22a5352407e..b2daca0d148 100644 --- a/arch/powerpc/platforms/512x/mpc512x.h +++ b/arch/powerpc/platforms/512x/mpc512x.h @@ -12,5 +12,8 @@ #ifndef __MPC512X_H__ #define __MPC512X_H__ extern void __init mpc512x_init_IRQ(void); +extern void __init mpc512x_init(void); +extern int __init mpc5121_clk_init(void); void __init mpc512x_declare_of_platform_devices(void); +extern void mpc512x_restart(char *cmd); #endif /* __MPC512X_H__ */ diff --git a/arch/powerpc/platforms/512x/mpc512x_shared.c b/arch/powerpc/platforms/512x/mpc512x_shared.c index 434d683df5a..b7f518a60f0 100644 --- a/arch/powerpc/platforms/512x/mpc512x_shared.c +++ b/arch/powerpc/platforms/512x/mpc512x_shared.c @@ -21,9 +21,38 @@ #include <asm/ipic.h> #include <asm/prom.h> #include <asm/time.h> +#include <asm/mpc5121.h> #include "mpc512x.h" +static struct mpc512x_reset_module __iomem *reset_module_base; + +static void __init mpc512x_restart_init(void) +{ + struct device_node *np; + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset"); + if (!np) + return; + + reset_module_base = of_iomap(np, 0); + of_node_put(np); +} + +void mpc512x_restart(char *cmd) +{ + if (reset_module_base) { + /* Enable software reset "RSTE" */ + out_be32(&reset_module_base->rpr, 0x52535445); + /* Set software hard reset */ + out_be32(&reset_module_base->rcr, 0x2); + } else { + pr_err("Restart module not mapped.\n"); + } + for (;;) + ; +} + void __init mpc512x_init_IRQ(void) { struct device_node *np; @@ -53,8 +82,22 @@ static struct of_device_id __initdata of_bus_ids[] = { void __init mpc512x_declare_of_platform_devices(void) { + struct device_node *np; + if (of_platform_bus_probe(NULL, of_bus_ids, NULL)) printk(KERN_ERR __FILE__ ": " "Error while probing of_platform bus\n"); + + np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-nfc"); + if (np) { + of_platform_device_create(np, NULL, NULL); + of_node_put(np); + } } +void __init mpc512x_init(void) +{ + mpc512x_declare_of_platform_devices(); + mpc5121_clk_init(); + mpc512x_restart_init(); +} diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c index cc29c0f5300..04d105d689f 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c @@ -302,11 +302,14 @@ static struct of_device_id mpc85xx_ids[] = { { .compatible = "gianfar", }, { .compatible = "fsl,rapidio-delta", }, { .compatible = "fsl,mpc8548-guts", }, + { .compatible = "gpio-leds", }, {}, }; static int __init mpc85xx_publish_devices(void) { + if (machine_is(mpc8568_mds)) + simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio"); if (machine_is(mpc8569_mds)) simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio"); diff --git a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c index e5da5f62b24..42e87f08aa0 100644 --- a/arch/powerpc/platforms/85xx/socrates_fpga_pic.c +++ b/arch/powerpc/platforms/85xx/socrates_fpga_pic.c @@ -232,7 +232,7 @@ static int socrates_fpga_pic_set_type(unsigned int virq, } static struct irq_chip socrates_fpga_pic_chip = { - .name = " FPGA-PIC ", + .name = "FPGA-PIC", .ack = socrates_fpga_pic_ack, .mask = socrates_fpga_pic_mask, .mask_ack = socrates_fpga_pic_mask_ack, diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index f559918f3c6..bc33d1859ae 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -134,7 +134,7 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m) pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); - seq_printf(m, "Vendor\t\t: RPC Electronics STx \n"); + seq_printf(m, "Vendor\t\t: RPC Electronics STx\n"); seq_printf(m, "PVR\t\t: 0x%x\n", pvid); seq_printf(m, "SVR\t\t: 0x%x\n", svid); diff --git a/arch/powerpc/platforms/cell/beat_htab.c b/arch/powerpc/platforms/cell/beat_htab.c index 35b1ec49271..2516c1cf846 100644 --- a/arch/powerpc/platforms/cell/beat_htab.c +++ b/arch/powerpc/platforms/cell/beat_htab.c @@ -40,7 +40,7 @@ #define DBG_LOW(fmt...) do { } while (0) #endif -static DEFINE_SPINLOCK(beat_htab_lock); +static DEFINE_RAW_SPINLOCK(beat_htab_lock); static inline unsigned int beat_read_mask(unsigned hpte_group) { @@ -114,18 +114,18 @@ static long beat_lpar_hpte_insert(unsigned long hpte_group, if (rflags & _PAGE_NO_CACHE) hpte_r &= ~_PAGE_COHERENT; - spin_lock(&beat_htab_lock); + raw_spin_lock(&beat_htab_lock); lpar_rc = beat_read_mask(hpte_group); if (lpar_rc == 0) { if (!(vflags & HPTE_V_BOLTED)) DBG_LOW(" full\n"); - spin_unlock(&beat_htab_lock); + raw_spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_insert_htab_entry(0, hpte_group, lpar_rc << 48, hpte_v, hpte_r, &slot); - spin_unlock(&beat_htab_lock); + raw_spin_unlock(&beat_htab_lock); /* * Since we try and ioremap PHBs we don't own, the pte insert @@ -198,17 +198,17 @@ static long beat_lpar_hpte_updatepp(unsigned long slot, "avpnv=%016lx, slot=%016lx, psize: %d, newpp %016lx ... ", want_v & HPTE_V_AVPN, slot, psize, newpp); - spin_lock(&beat_htab_lock); + raw_spin_lock(&beat_htab_lock); dummy0 = beat_lpar_hpte_getword0(slot); if ((dummy0 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock(&beat_htab_lock); + raw_spin_unlock(&beat_htab_lock); return -1; } lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock(&beat_htab_lock); + raw_spin_unlock(&beat_htab_lock); if (lpar_rc != 0 || dummy0 == 0) { DBG_LOW("not found !\n"); return -1; @@ -262,13 +262,13 @@ static void beat_lpar_hpte_updateboltedpp(unsigned long newpp, vsid = get_kernel_vsid(ea, MMU_SEGSIZE_256M); va = (vsid << 28) | (ea & 0x0fffffff); - spin_lock(&beat_htab_lock); + raw_spin_lock(&beat_htab_lock); slot = beat_lpar_hpte_find(va, psize); BUG_ON(slot == -1); lpar_rc = beat_write_htab_entry(0, slot, 0, newpp, 0, 7, &dummy0, &dummy1); - spin_unlock(&beat_htab_lock); + raw_spin_unlock(&beat_htab_lock); BUG_ON(lpar_rc != 0); } @@ -285,18 +285,18 @@ static void beat_lpar_hpte_invalidate(unsigned long slot, unsigned long va, slot, va, psize, local); want_v = hpte_encode_v(va, psize, MMU_SEGSIZE_256M); - spin_lock_irqsave(&beat_htab_lock, flags); + raw_spin_lock_irqsave(&beat_htab_lock, flags); dummy1 = beat_lpar_hpte_getword0(slot); if ((dummy1 & ~0x7FUL) != (want_v & ~0x7FUL)) { DBG_LOW("not found !\n"); - spin_unlock_irqrestore(&beat_htab_lock, flags); + raw_spin_unlock_irqrestore(&beat_htab_lock, flags); return; } lpar_rc = beat_write_htab_entry(0, slot, 0, 0, HPTE_V_VALID, 0, &dummy1, &dummy2); - spin_unlock_irqrestore(&beat_htab_lock, flags); + raw_spin_unlock_irqrestore(&beat_htab_lock, flags); BUG_ON(lpar_rc != 0); } diff --git a/arch/powerpc/platforms/cell/beat_interrupt.c b/arch/powerpc/platforms/cell/beat_interrupt.c index 36052a9ebcd..682af97321a 100644 --- a/arch/powerpc/platforms/cell/beat_interrupt.c +++ b/arch/powerpc/platforms/cell/beat_interrupt.c @@ -30,7 +30,7 @@ #include "beat_wrapper.h" #define MAX_IRQS NR_IRQS -static DEFINE_SPINLOCK(beatic_irq_mask_lock); +static DEFINE_RAW_SPINLOCK(beatic_irq_mask_lock); static uint64_t beatic_irq_mask_enable[(MAX_IRQS+255)/64]; static uint64_t beatic_irq_mask_ack[(MAX_IRQS+255)/64]; @@ -65,30 +65,30 @@ static void beatic_mask_irq(unsigned int irq_plug) { unsigned long flags; - spin_lock_irqsave(&beatic_irq_mask_lock, flags); + raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags); beatic_irq_mask_enable[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64))); beatic_update_irq_mask(irq_plug); - spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); + raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); } static void beatic_unmask_irq(unsigned int irq_plug) { unsigned long flags; - spin_lock_irqsave(&beatic_irq_mask_lock, flags); + raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags); beatic_irq_mask_enable[irq_plug/64] |= 1UL << (63 - (irq_plug%64)); beatic_update_irq_mask(irq_plug); - spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); + raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); } static void beatic_ack_irq(unsigned int irq_plug) { unsigned long flags; - spin_lock_irqsave(&beatic_irq_mask_lock, flags); + raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags); beatic_irq_mask_ack[irq_plug/64] &= ~(1UL << (63 - (irq_plug%64))); beatic_update_irq_mask(irq_plug); - spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); + raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); } static void beatic_end_irq(unsigned int irq_plug) @@ -103,14 +103,14 @@ static void beatic_end_irq(unsigned int irq_plug) printk(KERN_ERR "IRQ over-downcounted, plug %d\n", irq_plug); } - spin_lock_irqsave(&beatic_irq_mask_lock, flags); + raw_spin_lock_irqsave(&beatic_irq_mask_lock, flags); beatic_irq_mask_ack[irq_plug/64] |= 1UL << (63 - (irq_plug%64)); beatic_update_irq_mask(irq_plug); - spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); + raw_spin_unlock_irqrestore(&beatic_irq_mask_lock, flags); } static struct irq_chip beatic_pic = { - .name = " CELL-BEAT ", + .name = "CELL-BEAT", .unmask = beatic_unmask_irq, .mask = beatic_mask_irq, .eoi = beatic_end_irq, diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 6829cf7e2bd..10eb1a44362 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -88,7 +88,7 @@ static void iic_eoi(unsigned int irq) } static struct irq_chip iic_chip = { - .name = " CELL-IIC ", + .name = "CELL-IIC", .mask = iic_mask, .unmask = iic_unmask, .eoi = iic_eoi, @@ -133,7 +133,7 @@ static void iic_ioexc_cascade(unsigned int irq, struct irq_desc *desc) static struct irq_chip iic_ioexc_chip = { - .name = " CELL-IOEX", + .name = "CELL-IOEX", .mask = iic_mask, .unmask = iic_unmask, .eoi = iic_ioexc_eoi, diff --git a/arch/powerpc/platforms/cell/spider-pic.c b/arch/powerpc/platforms/cell/spider-pic.c index 01244f254a1..5876e888e41 100644 --- a/arch/powerpc/platforms/cell/spider-pic.c +++ b/arch/powerpc/platforms/cell/spider-pic.c @@ -168,7 +168,7 @@ static int spider_set_irq_type(unsigned int virq, unsigned int type) } static struct irq_chip spider_pic = { - .name = " SPIDER ", + .name = "SPIDER", .unmask = spider_unmask_irq, .mask = spider_mask_irq, .ack = spider_ack_irq, diff --git a/arch/powerpc/platforms/iseries/irq.c b/arch/powerpc/platforms/iseries/irq.c index 86c4b29eea8..ba446bf355a 100644 --- a/arch/powerpc/platforms/iseries/irq.c +++ b/arch/powerpc/platforms/iseries/irq.c @@ -273,7 +273,7 @@ static void iseries_end_IRQ(unsigned int irq) } static struct irq_chip iseries_pic = { - .name = "iSeries irq controller", + .name = "iSeries", .startup = iseries_startup_IRQ, .shutdown = iseries_shutdown_IRQ, .unmask = iseries_enable_IRQ, diff --git a/arch/powerpc/platforms/iseries/proc.c b/arch/powerpc/platforms/iseries/proc.c index 91f4c6cd4b9..06763682db4 100644 --- a/arch/powerpc/platforms/iseries/proc.c +++ b/arch/powerpc/platforms/iseries/proc.c @@ -85,7 +85,7 @@ static int proc_titantod_show(struct seq_file *m, void *v) seq_printf(m, " titan elapsed = %lu uSec\n", titan_usec); seq_printf(m, " tb elapsed = %lu ticks\n", tb_ticks); - seq_printf(m, " titan jiffies = %lu.%04lu \n", titan_jiffies, + seq_printf(m, " titan jiffies = %lu.%04lu\n", titan_jiffies, titan_jiff_rem_usec); seq_printf(m, " tb jiffies = %lu.%04lu\n", tb_jiffies, tb_jiff_rem_usec); diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index a6cd3394fea..b0863410517 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -256,7 +256,7 @@ static unsigned long iSeries_process_mainstore_vpd(struct MemoryBlock *mb_array, mem_blocks = iSeries_process_Condor_mainstore_vpd(mb_array, max_entries); - printk("Mainstore_VPD: numMemoryBlocks = %ld \n", mem_blocks); + printk("Mainstore_VPD: numMemoryBlocks = %ld\n", mem_blocks); for (i = 0; i < mem_blocks; ++i) { printk("Mainstore_VPD: block %3ld logical chunks %016lx - %016lx\n" " abs chunks %016lx - %016lx\n", diff --git a/arch/powerpc/platforms/powermac/bootx_init.c b/arch/powerpc/platforms/powermac/bootx_init.c index 9dd789a7370..84d7fd9bcc6 100644 --- a/arch/powerpc/platforms/powermac/bootx_init.c +++ b/arch/powerpc/platforms/powermac/bootx_init.c @@ -539,7 +539,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) if (model && (strcmp(model, "iMac,1") == 0 || strcmp(model, "PowerMac1,1") == 0)) { - bootx_printf("iMac,1 detected, shutting down USB \n"); + bootx_printf("iMac,1 detected, shutting down USB\n"); out_le32((unsigned __iomem *)0x80880008, 1); /* XXX */ } } @@ -554,7 +554,7 @@ void __init bootx_init(unsigned long r3, unsigned long r4) } else space = bi->totalParamsSize; - bootx_printf("Total space used by parameters & ramdisk: 0x%x \n", space); + bootx_printf("Total space used by parameters & ramdisk: 0x%x\n", space); /* New BootX will have flushed all TLBs and enters kernel with * MMU switched OFF, so this should not be useful anymore. diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c index 33e815f4466..9e1b9fd7520 100644 --- a/arch/powerpc/platforms/powermac/feature.c +++ b/arch/powerpc/platforms/powermac/feature.c @@ -59,10 +59,10 @@ extern struct device_node *k2_skiplist[2]; * We use a single global lock to protect accesses. Each driver has * to take care of its own locking */ -DEFINE_SPINLOCK(feature_lock); +DEFINE_RAW_SPINLOCK(feature_lock); -#define LOCK(flags) spin_lock_irqsave(&feature_lock, flags); -#define UNLOCK(flags) spin_unlock_irqrestore(&feature_lock, flags); +#define LOCK(flags) raw_spin_lock_irqsave(&feature_lock, flags); +#define UNLOCK(flags) raw_spin_unlock_irqrestore(&feature_lock, flags); /* diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c index c6f0f9e738e..80a5258d036 100644 --- a/arch/powerpc/platforms/powermac/nvram.c +++ b/arch/powerpc/platforms/powermac/nvram.c @@ -80,7 +80,7 @@ static int is_core_99; static int core99_bank = 0; static int nvram_partitions[3]; // XXX Turn that into a sem -static DEFINE_SPINLOCK(nv_lock); +static DEFINE_RAW_SPINLOCK(nv_lock); static int (*core99_write_bank)(int bank, u8* datas); static int (*core99_erase_bank)(int bank); @@ -165,10 +165,10 @@ static unsigned char indirect_nvram_read_byte(int addr) unsigned char val; unsigned long flags; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); out_8(nvram_addr, addr >> 5); val = in_8(&nvram_data[(addr & 0x1f) << 4]); - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); return val; } @@ -177,10 +177,10 @@ static void indirect_nvram_write_byte(int addr, unsigned char val) { unsigned long flags; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); out_8(nvram_addr, addr >> 5); out_8(&nvram_data[(addr & 0x1f) << 4], val); - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); } @@ -481,7 +481,7 @@ static void core99_nvram_sync(void) if (!is_core_99 || !nvram_data || !nvram_image) return; - spin_lock_irqsave(&nv_lock, flags); + raw_spin_lock_irqsave(&nv_lock, flags); if (!memcmp(nvram_image, (u8*)nvram_data + core99_bank*NVRAM_SIZE, NVRAM_SIZE)) goto bail; @@ -503,7 +503,7 @@ static void core99_nvram_sync(void) if (core99_write_bank(core99_bank, nvram_image)) printk("nvram: Error writing bank %d\n", core99_bank); bail: - spin_unlock_irqrestore(&nv_lock, flags); + raw_spin_unlock_irqrestore(&nv_lock, flags); #ifdef DEBUG mdelay(2000); diff --git a/arch/powerpc/platforms/powermac/pfunc_base.c b/arch/powerpc/platforms/powermac/pfunc_base.c index db20de512f3..f5e3cda6660 100644 --- a/arch/powerpc/platforms/powermac/pfunc_base.c +++ b/arch/powerpc/platforms/powermac/pfunc_base.c @@ -50,13 +50,13 @@ static int macio_do_gpio_write(PMF_STD_ARGS, u8 value, u8 mask) value = ~value; /* Toggle the GPIO */ - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = readb(addr); tmp = (tmp & ~mask) | (value & mask); DBG("Do write 0x%02x to GPIO %s (%p)\n", tmp, func->node->full_name, addr); writeb(tmp, addr); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -145,9 +145,9 @@ static int macio_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) struct macio_chip *macio = func->driver_data; unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); MACIO_OUT32(offset, (MACIO_IN32(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -168,9 +168,9 @@ static int macio_do_write_reg8(PMF_STD_ARGS, u32 offset, u8 value, u8 mask) struct macio_chip *macio = func->driver_data; unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); MACIO_OUT8(offset, (MACIO_IN8(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -223,12 +223,12 @@ static int macio_do_write_reg32_slm(PMF_STD_ARGS, u32 offset, u32 shift, if (args == NULL || args->count == 0) return -EINVAL; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = MACIO_IN32(offset); val = args->u[0].v << shift; tmp = (tmp & ~mask) | (val & mask); MACIO_OUT32(offset, tmp); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -243,12 +243,12 @@ static int macio_do_write_reg8_slm(PMF_STD_ARGS, u32 offset, u32 shift, if (args == NULL || args->count == 0) return -EINVAL; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); tmp = MACIO_IN8(offset); val = args->u[0].v << shift; tmp = (tmp & ~mask) | (val & mask); MACIO_OUT8(offset, tmp); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } @@ -278,12 +278,12 @@ static int unin_do_write_reg32(PMF_STD_ARGS, u32 offset, u32 value, u32 mask) { unsigned long flags; - spin_lock_irqsave(&feature_lock, flags); + raw_spin_lock_irqsave(&feature_lock, flags); /* This is fairly bogus in darwin, but it should work for our needs * implemeted that way: */ UN_OUT(offset, (UN_IN(offset) & ~mask) | (value & mask)); - spin_unlock_irqrestore(&feature_lock, flags); + raw_spin_unlock_irqrestore(&feature_lock, flags); return 0; } diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c index 09e82729627..630a533d0e5 100644 --- a/arch/powerpc/platforms/powermac/pic.c +++ b/arch/powerpc/platforms/powermac/pic.c @@ -57,7 +57,7 @@ static int max_irqs; static int max_real_irqs; static u32 level_mask[4]; -static DEFINE_SPINLOCK(pmac_pic_lock); +static DEFINE_RAW_SPINLOCK(pmac_pic_lock); #define NR_MASK_WORDS ((NR_IRQS + 31) / 32) static unsigned long ppc_lost_interrupts[NR_MASK_WORDS]; @@ -85,7 +85,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq) int i = src >> 5; unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __clear_bit(src, ppc_cached_irq_mask); if (__test_and_clear_bit(src, ppc_lost_interrupts)) atomic_dec(&ppc_n_lost_interrupts); @@ -97,7 +97,7 @@ static void pmac_mask_and_ack_irq(unsigned int virq) mb(); } while((in_le32(&pmac_irq_hw[i]->enable) & bit) != (ppc_cached_irq_mask[i] & bit)); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } static void pmac_ack_irq(unsigned int virq) @@ -107,12 +107,12 @@ static void pmac_ack_irq(unsigned int virq) int i = src >> 5; unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); if (__test_and_clear_bit(src, ppc_lost_interrupts)) atomic_dec(&ppc_n_lost_interrupts); out_le32(&pmac_irq_hw[i]->ack, bit); (void)in_le32(&pmac_irq_hw[i]->ack); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } static void __pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) @@ -152,12 +152,12 @@ static unsigned int pmac_startup_irq(unsigned int virq) unsigned long bit = 1UL << (src & 0x1f); int i = src >> 5; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); if ((irq_to_desc(virq)->status & IRQ_LEVEL) == 0) out_le32(&pmac_irq_hw[i]->ack, bit); __set_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 0); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return 0; } @@ -167,10 +167,10 @@ static void pmac_mask_irq(unsigned int virq) unsigned long flags; unsigned int src = irq_map[virq].hwirq; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __clear_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 1); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } static void pmac_unmask_irq(unsigned int virq) @@ -178,24 +178,24 @@ static void pmac_unmask_irq(unsigned int virq) unsigned long flags; unsigned int src = irq_map[virq].hwirq; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __set_bit(src, ppc_cached_irq_mask); __pmac_set_irq_mask(src, 0); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); } static int pmac_retrigger(unsigned int virq) { unsigned long flags; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); __pmac_retrigger(irq_map[virq].hwirq); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return 1; } static struct irq_chip pmac_pic = { - .name = " PMAC-PIC ", + .name = "PMAC-PIC", .startup = pmac_startup_irq, .mask = pmac_mask_irq, .ack = pmac_ack_irq, @@ -210,7 +210,7 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id) int irq, bits; int rc = IRQ_NONE; - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; @@ -220,12 +220,12 @@ static irqreturn_t gatwick_action(int cpl, void *dev_id) if (bits == 0) continue; irq += __ilog2(bits); - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); generic_handle_irq(irq); - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); rc = IRQ_HANDLED; } - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); return rc; } @@ -244,7 +244,7 @@ static unsigned int pmac_pic_get_irq(void) return NO_IRQ_IGNORE; /* ignore, already handled */ } #endif /* CONFIG_SMP */ - spin_lock_irqsave(&pmac_pic_lock, flags); + raw_spin_lock_irqsave(&pmac_pic_lock, flags); for (irq = max_real_irqs; (irq -= 32) >= 0; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; @@ -256,7 +256,7 @@ static unsigned int pmac_pic_get_irq(void) irq += __ilog2(bits); break; } - spin_unlock_irqrestore(&pmac_pic_lock, flags); + raw_spin_unlock_irqrestore(&pmac_pic_lock, flags); if (unlikely(irq < 0)) return NO_IRQ; return irq_linear_revmap(pmac_pic_host, irq); diff --git a/arch/powerpc/platforms/pseries/eeh.c b/arch/powerpc/platforms/pseries/eeh.c index ccd8dd03b8c..7df7fbb7cac 100644 --- a/arch/powerpc/platforms/pseries/eeh.c +++ b/arch/powerpc/platforms/pseries/eeh.c @@ -100,7 +100,7 @@ int eeh_subsystem_enabled; EXPORT_SYMBOL(eeh_subsystem_enabled); /* Lock to avoid races due to multiple reports of an error */ -static DEFINE_SPINLOCK(confirm_error_lock); +static DEFINE_RAW_SPINLOCK(confirm_error_lock); /* Buffer for reporting slot-error-detail rtas calls. Its here * in BSS, and not dynamically alloced, so that it ends up in @@ -436,7 +436,7 @@ static void __eeh_clear_slot(struct device_node *parent, int mode_flag) void eeh_clear_slot (struct device_node *dn, int mode_flag) { unsigned long flags; - spin_lock_irqsave(&confirm_error_lock, flags); + raw_spin_lock_irqsave(&confirm_error_lock, flags); dn = find_device_pe (dn); @@ -447,7 +447,7 @@ void eeh_clear_slot (struct device_node *dn, int mode_flag) PCI_DN(dn)->eeh_mode &= ~mode_flag; PCI_DN(dn)->eeh_check_count = 0; __eeh_clear_slot(dn, mode_flag); - spin_unlock_irqrestore(&confirm_error_lock, flags); + raw_spin_unlock_irqrestore(&confirm_error_lock, flags); } /** @@ -491,7 +491,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) pdn->eeh_mode & EEH_MODE_NOCHECK) { ignored_check++; pr_debug("EEH: Ignored check (%x) for %s %s\n", - pdn->eeh_mode, pci_name (dev), dn->full_name); + pdn->eeh_mode, eeh_pci_name(dev), dn->full_name); return 0; } @@ -506,7 +506,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * in one slot might report errors simultaneously, and we * only want one error recovery routine running. */ - spin_lock_irqsave(&confirm_error_lock, flags); + raw_spin_lock_irqsave(&confirm_error_lock, flags); rc = 1; if (pdn->eeh_mode & EEH_MODE_ISOLATED) { pdn->eeh_check_count ++; @@ -515,7 +515,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) printk (KERN_ERR "EEH: %d reads ignored for recovering device at " "location=%s driver=%s pci addr=%s\n", pdn->eeh_check_count, location, - dev->driver->name, pci_name(dev)); + dev->driver->name, eeh_pci_name(dev)); printk (KERN_ERR "EEH: Might be infinite loop in %s driver\n", dev->driver->name); dump_stack(); @@ -575,7 +575,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) * with other functions on this device, and functions under * bridges. */ eeh_mark_slot (dn, EEH_MODE_ISOLATED); - spin_unlock_irqrestore(&confirm_error_lock, flags); + raw_spin_unlock_irqrestore(&confirm_error_lock, flags); eeh_send_failure_event (dn, dev); @@ -586,7 +586,7 @@ int eeh_dn_check_failure(struct device_node *dn, struct pci_dev *dev) return 1; dn_unlock: - spin_unlock_irqrestore(&confirm_error_lock, flags); + raw_spin_unlock_irqrestore(&confirm_error_lock, flags); return rc; } @@ -1064,7 +1064,7 @@ void __init eeh_init(void) struct device_node *phb, *np; struct eeh_early_enable_info info; - spin_lock_init(&confirm_error_lock); + raw_spin_lock_init(&confirm_error_lock); spin_lock_init(&slot_errbuf_lock); np = of_find_node_by_path("/rtas"); diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index ef8e4544848..b8d70f5d9aa 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -337,7 +337,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) location = location ? location : "unknown"; printk(KERN_ERR "EEH: Error: Cannot find partition endpoint " "for location=%s pci addr=%s\n", - location, pci_name(event->dev)); + location, eeh_pci_name(event->dev)); return NULL; } @@ -368,7 +368,7 @@ struct pci_dn * handle_eeh_events (struct eeh_event *event) pci_str = pci_name (frozen_pdn->pcidev); drv_str = pcid_name (frozen_pdn->pcidev); } else { - pci_str = pci_name (event->dev); + pci_str = eeh_pci_name(event->dev); drv_str = pcid_name (event->dev); } @@ -478,9 +478,9 @@ excess_failures: * due to actual, failed cards. */ printk(KERN_ERR - "EEH: PCI device at location=%s driver=%s pci addr=%s \n" + "EEH: PCI device at location=%s driver=%s pci addr=%s\n" "has failed %d times in the last hour " - "and has been permanently disabled. \n" + "and has been permanently disabled.\n" "Please try reseating this device or replacing it.\n", location, drv_str, pci_str, frozen_pdn->eeh_freeze_count); goto perm_error; @@ -488,7 +488,7 @@ excess_failures: hard_fail: printk(KERN_ERR "EEH: Unable to recover from failure of PCI device " - "at location=%s driver=%s pci addr=%s \n" + "at location=%s driver=%s pci addr=%s\n" "Please try reseating this device or replacing it.\n", location, drv_str, pci_str); diff --git a/arch/powerpc/platforms/pseries/eeh_event.c b/arch/powerpc/platforms/pseries/eeh_event.c index ddb80f5d850..ec5df8f519c 100644 --- a/arch/powerpc/platforms/pseries/eeh_event.c +++ b/arch/powerpc/platforms/pseries/eeh_event.c @@ -80,7 +80,7 @@ static int eeh_event_handler(void * dummy) eeh_mark_slot(event->dn, EEH_MODE_RECOVERING); printk(KERN_INFO "EEH: Detected PCI bus error on device %s\n", - pci_name(event->dev)); + eeh_pci_name(event->dev)); pdn = handle_eeh_events(event); diff --git a/arch/powerpc/platforms/pseries/hotplug-cpu.c b/arch/powerpc/platforms/pseries/hotplug-cpu.c index 6ea4698d917..d1b124e44d7 100644 --- a/arch/powerpc/platforms/pseries/hotplug-cpu.c +++ b/arch/powerpc/platforms/pseries/hotplug-cpu.c @@ -387,24 +387,12 @@ static char cede_parameters[CEDE_LATENCY_PARAM_MAX_LENGTH]; static int parse_cede_parameters(void) { - int call_status; - memset(cede_parameters, 0, CEDE_LATENCY_PARAM_MAX_LENGTH); - call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, - NULL, - CEDE_LATENCY_TOKEN, - __pa(cede_parameters), - CEDE_LATENCY_PARAM_MAX_LENGTH); - - if (call_status != 0) - printk(KERN_INFO "CEDE_LATENCY: \ - %s %s Error calling get-system-parameter(0x%x)\n", - __FILE__, __func__, call_status); - else - printk(KERN_INFO "CEDE_LATENCY: \ - get-system-parameter successful.\n"); - - return call_status; + return rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1, + NULL, + CEDE_LATENCY_TOKEN, + __pa(cede_parameters), + CEDE_LATENCY_PARAM_MAX_LENGTH); } static int __init pseries_cpu_hotplug_init(void) diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index 2f58c71b725..1fefae76e29 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -124,8 +124,8 @@ static void probe_hcall_exit(unsigned long opcode, unsigned long retval, h = &__get_cpu_var(hcall_stats)[opcode / 4]; h->num_calls++; - h->tb_total = mftb() - h->tb_start; - h->purr_total = mfspr(SPRN_PURR) - h->purr_start; + h->tb_total += mftb() - h->tb_start; + h->purr_total += mfspr(SPRN_PURR) - h->purr_start; put_cpu_var(hcall_stats); } diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index b6fa3e4b51b..4b7a062dee1 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -165,7 +165,7 @@ int remove_phb_dynamic(struct pci_controller *phb) struct resource *res; int rc, i; - pr_debug("PCI: Removing PHB %04x:%02x... \n", + pr_debug("PCI: Removing PHB %04x:%02x...\n", pci_domain_nr(b), b->number); /* We cannot to remove a root bus that has children */ diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c index 15eb6107bcd..225a50ab14b 100644 --- a/arch/powerpc/platforms/pseries/phyp_dump.c +++ b/arch/powerpc/platforms/pseries/phyp_dump.c @@ -150,7 +150,7 @@ static void print_dump_header(const struct phyp_dump_header *ph) printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto); /*set cpu state and hpte states as well scratch pad area */ - printk(KERN_INFO " CPU AREA \n"); + printk(KERN_INFO " CPU AREA\n"); printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags); printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type); printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags); @@ -161,7 +161,7 @@ static void print_dump_header(const struct phyp_dump_header *ph) printk(KERN_INFO "cpu length_copied =%llx\n", ph->cpu_data.length_copied); - printk(KERN_INFO " HPTE AREA \n"); + printk(KERN_INFO " HPTE AREA\n"); printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags); printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type); printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags); @@ -172,7 +172,7 @@ static void print_dump_header(const struct phyp_dump_header *ph) printk(KERN_INFO "HPTE length_copied =%llx\n", ph->hpte_data.length_copied); - printk(KERN_INFO " SRSD AREA \n"); + printk(KERN_INFO " SRSD AREA\n"); printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags); printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type); printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags); diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index b4886635972..4e7f89a8456 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -144,8 +144,8 @@ static void __devinit smp_pSeries_kick_cpu(int nr) hcpuid = get_hard_smp_processor_id(nr); rc = plpar_hcall_norets(H_PROD, hcpuid); if (rc != H_SUCCESS) - printk(KERN_ERR "Error: Prod to wake up processor %d\ - Ret= %ld\n", nr, rc); + printk(KERN_ERR "Error: Prod to wake up processor %d " + "Ret= %ld\n", nr, rc); } } diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index f5f79196721..4ca641042ec 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -127,7 +127,7 @@ static inline unsigned int lpar_xirr_info_get(void) lpar_rc = plpar_xirr(&return_value); if (lpar_rc != H_SUCCESS) - panic(" bad return code xirr - rc = %lx \n", lpar_rc); + panic(" bad return code xirr - rc = %lx\n", lpar_rc); return (unsigned int)return_value; } @@ -424,7 +424,7 @@ static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask) } static struct irq_chip xics_pic_direct = { - .name = " XICS ", + .name = "XICS", .startup = xics_startup, .mask = xics_mask_irq, .unmask = xics_unmask_irq, @@ -433,7 +433,7 @@ static struct irq_chip xics_pic_direct = { }; static struct irq_chip xics_pic_lpar = { - .name = " XICS ", + .name = "XICS", .startup = xics_startup, .mask = xics_mask_irq, .unmask = xics_unmask_irq, @@ -510,15 +510,13 @@ static void __init xics_init_host(void) /* * XICS only has a single IPI, so encode the messages per CPU */ -struct xics_ipi_struct { - unsigned long value; - } ____cacheline_aligned; - -static struct xics_ipi_struct xics_ipi_message[NR_CPUS] __cacheline_aligned; +static DEFINE_PER_CPU_SHARED_ALIGNED(unsigned long, xics_ipi_message); static inline void smp_xics_do_message(int cpu, int msg) { - set_bit(msg, &xics_ipi_message[cpu].value); + unsigned long *tgt = &per_cpu(xics_ipi_message, cpu); + + set_bit(msg, tgt); mb(); if (firmware_has_feature(FW_FEATURE_LPAR)) lpar_qirr_info(cpu, IPI_PRIORITY); @@ -544,25 +542,23 @@ void smp_xics_message_pass(int target, int msg) static irqreturn_t xics_ipi_dispatch(int cpu) { + unsigned long *tgt = &per_cpu(xics_ipi_message, cpu); + WARN_ON(cpu_is_offline(cpu)); mb(); /* order mmio clearing qirr */ - while (xics_ipi_message[cpu].value) { - if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, - &xics_ipi_message[cpu].value)) { + while (*tgt) { + if (test_and_clear_bit(PPC_MSG_CALL_FUNCTION, tgt)) { smp_message_recv(PPC_MSG_CALL_FUNCTION); } - if (test_and_clear_bit(PPC_MSG_RESCHEDULE, - &xics_ipi_message[cpu].value)) { + if (test_and_clear_bit(PPC_MSG_RESCHEDULE, tgt)) { smp_message_recv(PPC_MSG_RESCHEDULE); } - if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, - &xics_ipi_message[cpu].value)) { + if (test_and_clear_bit(PPC_MSG_CALL_FUNC_SINGLE, tgt)) { smp_message_recv(PPC_MSG_CALL_FUNC_SINGLE); } #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) - if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, - &xics_ipi_message[cpu].value)) { + if (test_and_clear_bit(PPC_MSG_DEBUGGER_BREAK, tgt)) { smp_message_recv(PPC_MSG_DEBUGGER_BREAK); } #endif diff --git a/arch/powerpc/sysdev/cpm1.c b/arch/powerpc/sysdev/cpm1.c index a4b41dbde12..ecad10d4e92 100644 --- a/arch/powerpc/sysdev/cpm1.c +++ b/arch/powerpc/sysdev/cpm1.c @@ -77,7 +77,7 @@ static void cpm_end_irq(unsigned int irq) } static struct irq_chip cpm_pic = { - .name = " CPM PIC ", + .name = "CPM PIC", .mask = cpm_mask_irq, .unmask = cpm_unmask_irq, .eoi = cpm_end_irq, diff --git a/arch/powerpc/sysdev/cpm2_pic.c b/arch/powerpc/sysdev/cpm2_pic.c index 1709ac5aac7..fcea4ff825d 100644 --- a/arch/powerpc/sysdev/cpm2_pic.c +++ b/arch/powerpc/sysdev/cpm2_pic.c @@ -198,7 +198,7 @@ err_sense: } static struct irq_chip cpm2_pic = { - .name = " CPM2 SIU ", + .name = "CPM2 SIU", .mask = cpm2_mask_irq, .unmask = cpm2_unmask_irq, .ack = cpm2_ack, diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c index c6e11b07710..e094367d773 100644 --- a/arch/powerpc/sysdev/fsl_msi.c +++ b/arch/powerpc/sysdev/fsl_msi.c @@ -47,7 +47,7 @@ static struct irq_chip fsl_msi_chip = { .mask = mask_msi_irq, .unmask = unmask_msi_irq, .ack = fsl_msi_end_irq, - .name = " FSL-MSI ", + .name = "FSL-MSI", }; static int fsl_msi_host_map(struct irq_host *h, unsigned int virq, diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 0a55db8a5a2..6323e70e6bf 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -23,7 +23,7 @@ static unsigned char cached_8259[2] = { 0xff, 0xff }; #define cached_A1 (cached_8259[0]) #define cached_21 (cached_8259[1]) -static DEFINE_SPINLOCK(i8259_lock); +static DEFINE_RAW_SPINLOCK(i8259_lock); static struct irq_host *i8259_host; @@ -42,7 +42,7 @@ unsigned int i8259_irq(void) if (pci_intack) irq = readb(pci_intack); else { - spin_lock(&i8259_lock); + raw_spin_lock(&i8259_lock); lock = 1; /* Perform an interrupt acknowledge cycle on controller 1. */ @@ -74,7 +74,7 @@ unsigned int i8259_irq(void) irq = NO_IRQ; if (lock) - spin_unlock(&i8259_lock); + raw_spin_unlock(&i8259_lock); return irq; } @@ -82,7 +82,7 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr) { unsigned long flags; - spin_lock_irqsave(&i8259_lock, flags); + raw_spin_lock_irqsave(&i8259_lock, flags); if (irq_nr > 7) { cached_A1 |= 1 << (irq_nr-8); inb(0xA1); /* DUMMY */ @@ -95,7 +95,7 @@ static void i8259_mask_and_ack_irq(unsigned int irq_nr) outb(cached_21, 0x21); outb(0x20, 0x20); /* Non-specific EOI */ } - spin_unlock_irqrestore(&i8259_lock, flags); + raw_spin_unlock_irqrestore(&i8259_lock, flags); } static void i8259_set_irq_mask(int irq_nr) @@ -110,13 +110,13 @@ static void i8259_mask_irq(unsigned int irq_nr) pr_debug("i8259_mask_irq(%d)\n", irq_nr); - spin_lock_irqsave(&i8259_lock, flags); + raw_spin_lock_irqsave(&i8259_lock, flags); if (irq_nr < 8) cached_21 |= 1 << irq_nr; else cached_A1 |= 1 << (irq_nr-8); i8259_set_irq_mask(irq_nr); - spin_unlock_irqrestore(&i8259_lock, flags); + raw_spin_unlock_irqrestore(&i8259_lock, flags); } static void i8259_unmask_irq(unsigned int irq_nr) @@ -125,17 +125,17 @@ static void i8259_unmask_irq(unsigned int irq_nr) pr_debug("i8259_unmask_irq(%d)\n", irq_nr); - spin_lock_irqsave(&i8259_lock, flags); + raw_spin_lock_irqsave(&i8259_lock, flags); if (irq_nr < 8) cached_21 &= ~(1 << irq_nr); else cached_A1 &= ~(1 << (irq_nr-8)); i8259_set_irq_mask(irq_nr); - spin_unlock_irqrestore(&i8259_lock, flags); + raw_spin_unlock_irqrestore(&i8259_lock, flags); } static struct irq_chip i8259_pic = { - .name = " i8259 ", + .name = "i8259", .mask = i8259_mask_irq, .disable = i8259_mask_irq, .unmask = i8259_unmask_irq, @@ -241,7 +241,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr) unsigned long flags; /* initialize the controller */ - spin_lock_irqsave(&i8259_lock, flags); + raw_spin_lock_irqsave(&i8259_lock, flags); /* Mask all first */ outb(0xff, 0xA1); @@ -273,7 +273,7 @@ void i8259_init(struct device_node *node, unsigned long intack_addr) outb(cached_A1, 0xA1); outb(cached_21, 0x21); - spin_unlock_irqrestore(&i8259_lock, flags); + raw_spin_unlock_irqrestore(&i8259_lock, flags); /* create a legacy host */ i8259_host = irq_alloc_host(node, IRQ_HOST_MAP_LEGACY, diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index 28cdddd2f89..d7b9b9c6928 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -32,7 +32,7 @@ static struct ipic * primary_ipic; static struct irq_chip ipic_level_irq_chip, ipic_edge_irq_chip; -static DEFINE_SPINLOCK(ipic_lock); +static DEFINE_RAW_SPINLOCK(ipic_lock); static struct ipic_info ipic_info[] = { [1] = { @@ -530,13 +530,13 @@ static void ipic_unmask_irq(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&ipic_lock, flags); + raw_spin_lock_irqsave(&ipic_lock, flags); temp = ipic_read(ipic->regs, ipic_info[src].mask); temp |= (1 << (31 - ipic_info[src].bit)); ipic_write(ipic->regs, ipic_info[src].mask, temp); - spin_unlock_irqrestore(&ipic_lock, flags); + raw_spin_unlock_irqrestore(&ipic_lock, flags); } static void ipic_mask_irq(unsigned int virq) @@ -546,7 +546,7 @@ static void ipic_mask_irq(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&ipic_lock, flags); + raw_spin_lock_irqsave(&ipic_lock, flags); temp = ipic_read(ipic->regs, ipic_info[src].mask); temp &= ~(1 << (31 - ipic_info[src].bit)); @@ -556,7 +556,7 @@ static void ipic_mask_irq(unsigned int virq) * for nearly all cases. */ mb(); - spin_unlock_irqrestore(&ipic_lock, flags); + raw_spin_unlock_irqrestore(&ipic_lock, flags); } static void ipic_ack_irq(unsigned int virq) @@ -566,7 +566,7 @@ static void ipic_ack_irq(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&ipic_lock, flags); + raw_spin_lock_irqsave(&ipic_lock, flags); temp = 1 << (31 - ipic_info[src].bit); ipic_write(ipic->regs, ipic_info[src].ack, temp); @@ -575,7 +575,7 @@ static void ipic_ack_irq(unsigned int virq) * for nearly all cases. */ mb(); - spin_unlock_irqrestore(&ipic_lock, flags); + raw_spin_unlock_irqrestore(&ipic_lock, flags); } static void ipic_mask_irq_and_ack(unsigned int virq) @@ -585,7 +585,7 @@ static void ipic_mask_irq_and_ack(unsigned int virq) unsigned long flags; u32 temp; - spin_lock_irqsave(&ipic_lock, flags); + raw_spin_lock_irqsave(&ipic_lock, flags); temp = ipic_read(ipic->regs, ipic_info[src].mask); temp &= ~(1 << (31 - ipic_info[src].bit)); @@ -598,7 +598,7 @@ static void ipic_mask_irq_and_ack(unsigned int virq) * for nearly all cases. */ mb(); - spin_unlock_irqrestore(&ipic_lock, flags); + raw_spin_unlock_irqrestore(&ipic_lock, flags); } static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) @@ -660,7 +660,7 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) /* level interrupts and edge interrupts have different ack operations */ static struct irq_chip ipic_level_irq_chip = { - .name = " IPIC ", + .name = "IPIC", .unmask = ipic_unmask_irq, .mask = ipic_mask_irq, .mask_ack = ipic_mask_irq, @@ -668,7 +668,7 @@ static struct irq_chip ipic_level_irq_chip = { }; static struct irq_chip ipic_edge_irq_chip = { - .name = " IPIC ", + .name = "IPIC", .unmask = ipic_unmask_irq, .mask = ipic_mask_irq, .mask_ack = ipic_mask_irq_and_ack, diff --git a/arch/powerpc/sysdev/mpc8xx_pic.c b/arch/powerpc/sysdev/mpc8xx_pic.c index 69bd6f4dff8..8c27d261aba 100644 --- a/arch/powerpc/sysdev/mpc8xx_pic.c +++ b/arch/powerpc/sysdev/mpc8xx_pic.c @@ -94,7 +94,7 @@ static int mpc8xx_set_irq_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip mpc8xx_pic = { - .name = " MPC8XX SIU ", + .name = "MPC8XX SIU", .unmask = mpc8xx_unmask_irq, .mask = mpc8xx_mask_irq, .ack = mpc8xx_ack, diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 470dc6c11d5..339e8a3e26d 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -46,7 +46,7 @@ static struct mpic *mpics; static struct mpic *mpic_primary; -static DEFINE_SPINLOCK(mpic_lock); +static DEFINE_RAW_SPINLOCK(mpic_lock); #ifdef CONFIG_PPC32 /* XXX for now */ #ifdef CONFIG_IRQ_ALL_CPUS @@ -347,10 +347,10 @@ static inline void mpic_ht_end_irq(struct mpic *mpic, unsigned int source) unsigned int mask = 1U << (fixup->index & 0x1f); writel(mask, fixup->applebase + soff); } else { - spin_lock(&mpic->fixup_lock); + raw_spin_lock(&mpic->fixup_lock); writeb(0x11 + 2 * fixup->index, fixup->base + 2); writel(fixup->data, fixup->base + 4); - spin_unlock(&mpic->fixup_lock); + raw_spin_unlock(&mpic->fixup_lock); } } @@ -366,7 +366,7 @@ static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, DBG("startup_ht_interrupt(0x%x, 0x%x) index: %d\n", source, irqflags, fixup->index); - spin_lock_irqsave(&mpic->fixup_lock, flags); + raw_spin_lock_irqsave(&mpic->fixup_lock, flags); /* Enable and configure */ writeb(0x10 + 2 * fixup->index, fixup->base + 2); tmp = readl(fixup->base + 4); @@ -374,7 +374,7 @@ static void mpic_startup_ht_interrupt(struct mpic *mpic, unsigned int source, if (irqflags & IRQ_LEVEL) tmp |= 0x22; writel(tmp, fixup->base + 4); - spin_unlock_irqrestore(&mpic->fixup_lock, flags); + raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags); #ifdef CONFIG_PM /* use the lowest bit inverted to the actual HW, @@ -396,12 +396,12 @@ static void mpic_shutdown_ht_interrupt(struct mpic *mpic, unsigned int source, DBG("shutdown_ht_interrupt(0x%x, 0x%x)\n", source, irqflags); /* Disable */ - spin_lock_irqsave(&mpic->fixup_lock, flags); + raw_spin_lock_irqsave(&mpic->fixup_lock, flags); writeb(0x10 + 2 * fixup->index, fixup->base + 2); tmp = readl(fixup->base + 4); tmp |= 1; writel(tmp, fixup->base + 4); - spin_unlock_irqrestore(&mpic->fixup_lock, flags); + raw_spin_unlock_irqrestore(&mpic->fixup_lock, flags); #ifdef CONFIG_PM /* use the lowest bit inverted to the actual HW, @@ -515,7 +515,7 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) BUG_ON(mpic->fixups == NULL); /* Init spinlock */ - spin_lock_init(&mpic->fixup_lock); + raw_spin_lock_init(&mpic->fixup_lock); /* Map U3 config space. We assume all IO-APICs are on the primary bus * so we only need to map 64kB. @@ -573,12 +573,12 @@ static int irq_choose_cpu(const cpumask_t *mask) if (cpumask_equal(mask, cpu_all_mask)) { static int irq_rover; - static DEFINE_SPINLOCK(irq_rover_lock); + static DEFINE_RAW_SPINLOCK(irq_rover_lock); unsigned long flags; /* Round-robin distribution... */ do_round_robin: - spin_lock_irqsave(&irq_rover_lock, flags); + raw_spin_lock_irqsave(&irq_rover_lock, flags); while (!cpu_online(irq_rover)) { if (++irq_rover >= NR_CPUS) @@ -590,7 +590,7 @@ static int irq_choose_cpu(const cpumask_t *mask) irq_rover = 0; } while (!cpu_online(irq_rover)); - spin_unlock_irqrestore(&irq_rover_lock, flags); + raw_spin_unlock_irqrestore(&irq_rover_lock, flags); } else { cpuid = cpumask_first_and(mask, cpu_online_mask); if (cpuid >= nr_cpu_ids) @@ -1368,14 +1368,14 @@ void __init mpic_set_serial_int(struct mpic *mpic, int enable) unsigned long flags; u32 v; - spin_lock_irqsave(&mpic_lock, flags); + raw_spin_lock_irqsave(&mpic_lock, flags); v = mpic_read(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1); if (enable) v |= MPIC_GREG_GLOBAL_CONF_1_SIE; else v &= ~MPIC_GREG_GLOBAL_CONF_1_SIE; mpic_write(mpic->gregs, MPIC_GREG_GLOBAL_CONF_1, v); - spin_unlock_irqrestore(&mpic_lock, flags); + raw_spin_unlock_irqrestore(&mpic_lock, flags); } void mpic_irq_set_priority(unsigned int irq, unsigned int pri) @@ -1388,7 +1388,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) if (!mpic) return; - spin_lock_irqsave(&mpic_lock, flags); + raw_spin_lock_irqsave(&mpic_lock, flags); if (mpic_is_ipi(mpic, irq)) { reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & ~MPIC_VECPRI_PRIORITY_MASK; @@ -1400,7 +1400,7 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) mpic_irq_write(src, MPIC_INFO(IRQ_VECTOR_PRI), reg | (pri << MPIC_VECPRI_PRIORITY_SHIFT)); } - spin_unlock_irqrestore(&mpic_lock, flags); + raw_spin_unlock_irqrestore(&mpic_lock, flags); } void mpic_setup_this_cpu(void) @@ -1415,7 +1415,7 @@ void mpic_setup_this_cpu(void) DBG("%s: setup_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); - spin_lock_irqsave(&mpic_lock, flags); + raw_spin_lock_irqsave(&mpic_lock, flags); /* let the mpic know we want intrs. default affinity is 0xffffffff * until changed via /proc. That's how it's done on x86. If we want @@ -1431,7 +1431,7 @@ void mpic_setup_this_cpu(void) /* Set current processor priority to 0 */ mpic_cpu_write(MPIC_INFO(CPU_CURRENT_TASK_PRI), 0); - spin_unlock_irqrestore(&mpic_lock, flags); + raw_spin_unlock_irqrestore(&mpic_lock, flags); #endif /* CONFIG_SMP */ } @@ -1460,7 +1460,7 @@ void mpic_teardown_this_cpu(int secondary) BUG_ON(mpic == NULL); DBG("%s: teardown_this_cpu(%d)\n", mpic->name, hard_smp_processor_id()); - spin_lock_irqsave(&mpic_lock, flags); + raw_spin_lock_irqsave(&mpic_lock, flags); /* let the mpic know we don't want intrs. */ for (i = 0; i < mpic->num_sources ; i++) @@ -1474,7 +1474,7 @@ void mpic_teardown_this_cpu(int secondary) */ mpic_eoi(mpic); - spin_unlock_irqrestore(&mpic_lock, flags); + raw_spin_unlock_irqrestore(&mpic_lock, flags); } @@ -1575,7 +1575,7 @@ void mpic_request_ipis(void) int i; BUG_ON(mpic == NULL); - printk(KERN_INFO "mpic: requesting IPIs ... \n"); + printk(KERN_INFO "mpic: requesting IPIs...\n"); for (i = 0; i < 4; i++) { unsigned int vipi = irq_create_mapping(mpic->irqhost, diff --git a/arch/powerpc/sysdev/mpic_pasemi_msi.c b/arch/powerpc/sysdev/mpic_pasemi_msi.c index 0f6ab06f847..3b6a9a43718 100644 --- a/arch/powerpc/sysdev/mpic_pasemi_msi.c +++ b/arch/powerpc/sysdev/mpic_pasemi_msi.c @@ -60,7 +60,7 @@ static struct irq_chip mpic_pasemi_msi_chip = { .eoi = mpic_end_irq, .set_type = mpic_set_irq_type, .set_affinity = mpic_set_affinity, - .name = "PASEMI-MSI ", + .name = "PASEMI-MSI", }; static int pasemi_msi_check_device(struct pci_dev *pdev, int nvec, int type) diff --git a/arch/powerpc/sysdev/mv64x60_dev.c b/arch/powerpc/sysdev/mv64x60_dev.c index b6bd775d2e2..31acd3b1718 100644 --- a/arch/powerpc/sysdev/mv64x60_dev.c +++ b/arch/powerpc/sysdev/mv64x60_dev.c @@ -16,6 +16,7 @@ #include <linux/mv643xx.h> #include <linux/platform_device.h> #include <linux/of_platform.h> +#include <linux/dma-mapping.h> #include <asm/prom.h> @@ -189,6 +190,7 @@ static int __init mv64x60_mpsc_device_setup(struct device_node *np, int id) pdev = platform_device_alloc(MPSC_CTLR_NAME, port_number); if (!pdev) return -ENOMEM; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); err = platform_device_add_resources(pdev, r, 5); if (err) @@ -302,6 +304,7 @@ static int __init mv64x60_eth_device_setup(struct device_node *np, int id, if (!pdev) return -ENOMEM; + pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); err = platform_device_add_resources(pdev, r, 1); if (err) goto error; diff --git a/arch/powerpc/sysdev/ppc4xx_soc.c b/arch/powerpc/sysdev/ppc4xx_soc.c index 5b32adc9a9b..5c014350bf1 100644 --- a/arch/powerpc/sysdev/ppc4xx_soc.c +++ b/arch/powerpc/sysdev/ppc4xx_soc.c @@ -174,7 +174,8 @@ static int __init ppc4xx_l2c_probe(void) | L2C_CFG_CPIM | L2C_CFG_TPIM | L2C_CFG_LIM | L2C_CFG_SMCM; /* Check for 460EX/GT special handling */ - if (of_device_is_compatible(np, "ibm,l2-cache-460ex")) + if (of_device_is_compatible(np, "ibm,l2-cache-460ex") || + of_device_is_compatible(np, "ibm,l2-cache-460gt")) r |= L2C_CFG_RDBW; mtdcr(dcrbase_l2c + DCRN_L2C0_CFG, r); diff --git a/arch/powerpc/sysdev/qe_lib/qe_ic.c b/arch/powerpc/sysdev/qe_lib/qe_ic.c index 2acc928d192..d927da893ec 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_ic.c +++ b/arch/powerpc/sysdev/qe_lib/qe_ic.c @@ -237,7 +237,7 @@ static void qe_ic_mask_irq(unsigned int virq) } static struct irq_chip qe_ic_irq_chip = { - .name = " QEIC ", + .name = "QEIC", .unmask = qe_ic_unmask_irq, .mask = qe_ic_mask_irq, .mask_ack = qe_ic_mask_irq, @@ -256,7 +256,7 @@ static int qe_ic_host_map(struct irq_host *h, unsigned int virq, struct irq_chip *chip; if (qe_ic_info[hw].mask == 0) { - printk(KERN_ERR "Can't map reserved IRQ \n"); + printk(KERN_ERR "Can't map reserved IRQ\n"); return -EINVAL; } /* Default chip */ diff --git a/arch/powerpc/sysdev/qe_lib/qe_io.c b/arch/powerpc/sysdev/qe_lib/qe_io.c index 7c87460179e..77e4934b88c 100644 --- a/arch/powerpc/sysdev/qe_lib/qe_io.c +++ b/arch/powerpc/sysdev/qe_lib/qe_io.c @@ -157,13 +157,13 @@ int par_io_of_config(struct device_node *np) const unsigned int *pio_map; if (par_io == NULL) { - printk(KERN_ERR "par_io not initialized \n"); + printk(KERN_ERR "par_io not initialized\n"); return -1; } ph = of_get_property(np, "pio-handle", NULL); if (ph == NULL) { - printk(KERN_ERR "pio-handle not available \n"); + printk(KERN_ERR "pio-handle not available\n"); return -1; } @@ -171,12 +171,12 @@ int par_io_of_config(struct device_node *np) pio_map = of_get_property(pio, "pio-map", &pio_map_len); if (pio_map == NULL) { - printk(KERN_ERR "pio-map is not set! \n"); + printk(KERN_ERR "pio-map is not set!\n"); return -1; } pio_map_len /= sizeof(unsigned int); if ((pio_map_len % 6) != 0) { - printk(KERN_ERR "pio-map format wrong! \n"); + printk(KERN_ERR "pio-map format wrong!\n"); return -1; } diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 6f220a913e4..0038fb78f09 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -177,7 +177,7 @@ static int uic_set_irq_type(unsigned int virq, unsigned int flow_type) } static struct irq_chip uic_irq_chip = { - .name = " UIC ", + .name = "UIC", .unmask = uic_unmask_irq, .mask = uic_mask_irq, .mask_ack = uic_mask_ack_irq, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 4e6152c1376..8bad7d5f32a 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -61,7 +61,7 @@ static int xmon_owner; static int xmon_gate; #endif /* CONFIG_SMP */ -static unsigned long in_xmon = 0; +static unsigned long in_xmon __read_mostly = 0; static unsigned long adrs; static int size = 1; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index c80235206c0..19deda8d887 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -54,6 +54,9 @@ config GENERIC_BUG depends on BUG default y +config GENERIC_BUG_RELATIVE_POINTERS + def_bool y + config NO_IOMEM def_bool y @@ -95,6 +98,9 @@ config S390 select HAVE_ARCH_TRACEHOOK select INIT_ALL_POSSIBLE select HAVE_PERF_EVENTS + select HAVE_KERNEL_GZIP + select HAVE_KERNEL_BZIP2 + select HAVE_KERNEL_LZMA select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug index 2283933a9a9..45e0c6199f3 100644 --- a/arch/s390/Kconfig.debug +++ b/arch/s390/Kconfig.debug @@ -6,4 +6,17 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" +config DEBUG_STRICT_USER_COPY_CHECKS + bool "Strict user copy size checks" + ---help--- + Enabling this option turns a certain set of sanity checks for user + copy operations into compile time warnings. + + The copy_from_user() etc checks are there to help test if there + are sufficient security checks on the length argument of + the copy operation, by having gcc prove that the argument is + within bounds. + + If unsure, or if you run an older (pre 4.4) gcc, say N. + endmenu diff --git a/arch/s390/Makefile b/arch/s390/Makefile index fc8fb20e7fc..0da10746e0e 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -14,6 +14,7 @@ # ifndef CONFIG_64BIT +LD_BFD := elf32-s390 LDFLAGS := -m elf_s390 KBUILD_CFLAGS += -m31 KBUILD_AFLAGS += -m31 @@ -21,6 +22,7 @@ UTS_MACHINE := s390 STACK_SIZE := 8192 CHECKFLAGS += -D__s390__ -msize-long else +LD_BFD := elf64-s390 LDFLAGS := -m elf64_s390 MODFLAGS += -fpic -D__PIC__ KBUILD_CFLAGS += -m64 @@ -30,6 +32,8 @@ STACK_SIZE := 16384 CHECKFLAGS += -D__s390__ -D__s390x__ endif +export LD_BFD + cflags-$(CONFIG_MARCH_G5) += $(call cc-option,-march=g5) cflags-$(CONFIG_MARCH_Z900) += $(call cc-option,-march=z900) cflags-$(CONFIG_MARCH_Z990) += $(call cc-option,-march=z990) @@ -85,7 +89,9 @@ KBUILD_AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary LDFLAGS_vmlinux := -e start -head-y := arch/s390/kernel/head.o arch/s390/kernel/init_task.o +head-y := arch/s390/kernel/head.o +head-y += arch/s390/kernel/$(if $(CONFIG_64BIT),head64.o,head31.o) +head-y += arch/s390/kernel/init_task.o core-y += arch/s390/mm/ arch/s390/kernel/ arch/s390/crypto/ \ arch/s390/appldata/ arch/s390/hypfs/ arch/s390/kvm/ @@ -99,12 +105,12 @@ drivers-$(CONFIG_OPROFILE) += arch/s390/oprofile/ boot := arch/s390/boot -all: image +all: image bzImage install: vmlinux $(Q)$(MAKE) $(build)=$(boot) $@ -image: vmlinux +image bzImage: vmlinux $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ zfcpdump: @@ -116,4 +122,5 @@ archclean: # Don't use tabs in echo arguments define archhelp echo '* image - Kernel image for IPL ($(boot)/image)' + echo '* bzImage - Compressed kernel image for IPL ($(boot)/bzImage)' endef diff --git a/arch/s390/boot/Makefile b/arch/s390/boot/Makefile index 4d97eef36b8..8800cf09069 100644 --- a/arch/s390/boot/Makefile +++ b/arch/s390/boot/Makefile @@ -9,10 +9,18 @@ COMPILE_VERSION := __linux_compile_version_id__`hostname | \ EXTRA_CFLAGS := -DCOMPILE_VERSION=$(COMPILE_VERSION) -gstabs -I. targets := image +targets += bzImage +subdir- := compressed $(obj)/image: vmlinux FORCE $(call if_changed,objcopy) +$(obj)/bzImage: $(obj)/compressed/vmlinux FORCE + $(call if_changed,objcopy) + +$(obj)/compressed/vmlinux: FORCE + $(Q)$(MAKE) $(build)=$(obj)/compressed $@ + install: $(CONFIGURE) $(obj)/image sh -x $(srctree)/$(obj)/install.sh $(KERNELRELEASE) $(obj)/image \ System.map Kerntypes "$(INSTALL_PATH)" diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile new file mode 100644 index 00000000000..6e4a67ad07e --- /dev/null +++ b/arch/s390/boot/compressed/Makefile @@ -0,0 +1,60 @@ +# +# linux/arch/s390/boot/compressed/Makefile +# +# create a compressed vmlinux image from the original vmlinux +# + +BITS := $(if $(CONFIG_64BIT),64,31) + +targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ + vmlinux.bin.lzma misc.o piggy.o sizes.h head$(BITS).o + +KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 +KBUILD_CFLAGS += $(cflags-y) +KBUILD_CFLAGS += $(call cc-option,-mpacked-stack) +KBUILD_CFLAGS += $(call cc-option,-ffreestanding) + +GCOV_PROFILE := n + +OBJECTS := $(addprefix $(objtree)/arch/s390/kernel/, head.o sclp.o ebcdic.o) +OBJECTS += $(obj)/head$(BITS).o $(obj)/misc.o $(obj)/piggy.o + +LDFLAGS_vmlinux := --oformat $(LD_BFD) -e startup -T +$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS) + $(call if_changed,ld) + @: + +sed-sizes := -e 's/^\([0-9a-fA-F]*\) . \(__bss_start\|_end\)$$/\#define SZ\2 0x\1/p' + +quiet_cmd_sizes = GEN $@ + cmd_sizes = $(NM) $< | sed -n $(sed-sizes) > $@ + +$(obj)/sizes.h: vmlinux + $(call if_changed,sizes) + +AFLAGS_head$(BITS).o += -I$(obj) +$(obj)/head$(BITS).o: $(obj)/sizes.h + +CFLAGS_misc.o += -I$(obj) +$(obj)/misc.o: $(obj)/sizes.h + +OBJCOPYFLAGS_vmlinux.bin := -R .comment -S +$(obj)/vmlinux.bin: vmlinux + $(call if_changed,objcopy) + +vmlinux.bin.all-y := $(obj)/vmlinux.bin + +suffix-$(CONFIG_KERNEL_GZIP) := gz +suffix-$(CONFIG_KERNEL_BZIP2) := bz2 +suffix-$(CONFIG_KERNEL_LZMA) := lzma + +$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) + $(call if_changed,gzip) +$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) + $(call if_changed,bzip2) +$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) + $(call if_changed,lzma) + +LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T +$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) + $(call if_changed,ld) diff --git a/arch/s390/boot/compressed/head31.S b/arch/s390/boot/compressed/head31.S new file mode 100644 index 00000000000..2a5523a32bc --- /dev/null +++ b/arch/s390/boot/compressed/head31.S @@ -0,0 +1,51 @@ +/* + * Startup glue code to uncompress the kernel + * + * Copyright IBM Corp. 2010 + * + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> + */ + +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page.h> +#include "sizes.h" + +__HEAD + .globl startup_continue +startup_continue: + basr %r13,0 # get base +.LPG1: + # setup stack + l %r15,.Lstack-.LPG1(%r13) + ahi %r15,-96 + l %r1,.Ldecompress-.LPG1(%r13) + basr %r14,%r1 + # setup registers for memory mover & branch to target + lr %r4,%r2 + l %r2,.Loffset-.LPG1(%r13) + la %r4,0(%r2,%r4) + l %r3,.Lmvsize-.LPG1(%r13) + lr %r5,%r3 + # move the memory mover someplace safe + la %r1,0x200 + mvc 0(mover_end-mover,%r1),mover-.LPG1(%r13) + # decompress image is started at 0x11000 + lr %r6,%r2 + br %r1 +mover: + mvcle %r2,%r4,0 + jo mover + br %r6 +mover_end: + + .align 8 +.Lstack: + .long 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER)) +.Ldecompress: + .long decompress_kernel +.Loffset: + .long 0x11000 +.Lmvsize: + .long SZ__bss_start diff --git a/arch/s390/boot/compressed/head64.S b/arch/s390/boot/compressed/head64.S new file mode 100644 index 00000000000..2982cb14055 --- /dev/null +++ b/arch/s390/boot/compressed/head64.S @@ -0,0 +1,48 @@ +/* + * Startup glue code to uncompress the kernel + * + * Copyright IBM Corp. 2010 + * + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> + */ + +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page.h> +#include "sizes.h" + +__HEAD + .globl startup_continue +startup_continue: + basr %r13,0 # get base +.LPG1: + # setup stack + lg %r15,.Lstack-.LPG1(%r13) + aghi %r15,-160 + brasl %r14,decompress_kernel + # setup registers for memory mover & branch to target + lgr %r4,%r2 + lg %r2,.Loffset-.LPG1(%r13) + la %r4,0(%r2,%r4) + lg %r3,.Lmvsize-.LPG1(%r13) + lgr %r5,%r3 + # move the memory mover someplace safe + la %r1,0x200 + mvc 0(mover_end-mover,%r1),mover-.LPG1(%r13) + # decompress image is started at 0x11000 + lgr %r6,%r2 + br %r1 +mover: + mvcle %r2,%r4,0 + jo mover + br %r6 +mover_end: + + .align 8 +.Lstack: + .quad 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER)) +.Loffset: + .quad 0x11000 +.Lmvsize: + .quad SZ__bss_start diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c new file mode 100644 index 00000000000..a97d6952582 --- /dev/null +++ b/arch/s390/boot/compressed/misc.c @@ -0,0 +1,158 @@ +/* + * Definitions and wrapper functions for kernel decompressor + * + * Copyright IBM Corp. 2010 + * + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com> + */ + +#include <asm/uaccess.h> +#include <asm/page.h> +#include <asm/ipl.h> +#include "sizes.h" + +/* + * gzip declarations + */ +#define STATIC static + +#undef memset +#undef memcpy +#undef memmove +#define memzero(s, n) memset((s), 0, (n)) + +/* Symbols defined by linker scripts */ +extern char input_data[]; +extern int input_len; +extern int _text; +extern int _end; + +static void error(char *m); + +static unsigned long free_mem_ptr; +static unsigned long free_mem_end_ptr; + +#ifdef CONFIG_HAVE_KERNEL_BZIP2 +#define HEAP_SIZE 0x400000 +#else +#define HEAP_SIZE 0x10000 +#endif + +#ifdef CONFIG_KERNEL_GZIP +#include "../../../../lib/decompress_inflate.c" +#endif + +#ifdef CONFIG_KERNEL_BZIP2 +#include "../../../../lib/decompress_bunzip2.c" +#endif + +#ifdef CONFIG_KERNEL_LZMA +#include "../../../../lib/decompress_unlzma.c" +#endif + +extern _sclp_print_early(const char *); + +int puts(const char *s) +{ + _sclp_print_early(s); + return 0; +} + +void *memset(void *s, int c, size_t n) +{ + char *xs; + + if (c == 0) + return __builtin_memset(s, 0, n); + + xs = (char *) s; + if (n > 0) + do { + *xs++ = c; + } while (--n > 0); + return s; +} + +void *memcpy(void *__dest, __const void *__src, size_t __n) +{ + return __builtin_memcpy(__dest, __src, __n); +} + +void *memmove(void *__dest, __const void *__src, size_t __n) +{ + char *d; + const char *s; + + if (__dest <= __src) + return __builtin_memcpy(__dest, __src, __n); + d = __dest + __n; + s = __src + __n; + while (__n--) + *--d = *--s; + return __dest; +} + +static void error(char *x) +{ + unsigned long long psw = 0x000a0000deadbeefULL; + + puts("\n\n"); + puts(x); + puts("\n\n -- System halted"); + + asm volatile("lpsw %0" : : "Q" (psw)); +} + +/* + * Safe guard the ipl parameter block against a memory area that will be + * overwritten. The validity check for the ipl parameter block is complex + * (see cio_get_iplinfo and ipl_save_parameters) but if the pointer to + * the ipl parameter block intersects with the passed memory area we can + * safely assume that we can read from that memory. In that case just copy + * the memory to IPL_PARMBLOCK_ORIGIN even if there is no ipl parameter + * block. + */ +static void check_ipl_parmblock(void *start, unsigned long size) +{ + void *src, *dst; + + src = (void *)(unsigned long) S390_lowcore.ipl_parmblock_ptr; + if (src + PAGE_SIZE <= start || src >= start + size) + return; + dst = (void *) IPL_PARMBLOCK_ORIGIN; + memmove(dst, src, PAGE_SIZE); + S390_lowcore.ipl_parmblock_ptr = IPL_PARMBLOCK_ORIGIN; +} + +unsigned long decompress_kernel(void) +{ + unsigned long output_addr; + unsigned char *output; + + free_mem_ptr = (unsigned long)&_end; + free_mem_end_ptr = free_mem_ptr + HEAP_SIZE; + output = (unsigned char *) ((free_mem_end_ptr + 4095UL) & -4096UL); + + check_ipl_parmblock((void *) 0, (unsigned long) output + SZ__bss_start); + +#ifdef CONFIG_BLK_DEV_INITRD + /* + * Move the initrd right behind the end of the decompressed + * kernel image. + */ + if (INITRD_START && INITRD_SIZE && + INITRD_START < (unsigned long) output + SZ__bss_start) { + check_ipl_parmblock(output + SZ__bss_start, + INITRD_START + INITRD_SIZE); + memmove(output + SZ__bss_start, + (void *) INITRD_START, INITRD_SIZE); + INITRD_START = (unsigned long) output + SZ__bss_start; + } +#endif + + puts("Uncompressing Linux... "); + decompress(input_data, input_len, NULL, NULL, output, NULL, error); + puts("Ok, booting the kernel.\n"); + return (unsigned long) output; +} + diff --git a/arch/s390/boot/compressed/vmlinux.lds.S b/arch/s390/boot/compressed/vmlinux.lds.S new file mode 100644 index 00000000000..d80f79d8dd9 --- /dev/null +++ b/arch/s390/boot/compressed/vmlinux.lds.S @@ -0,0 +1,55 @@ +#include <asm-generic/vmlinux.lds.h> + +#ifdef CONFIG_64BIT +OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390") +OUTPUT_ARCH(s390:64-bit) +#else +OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390") +OUTPUT_ARCH(s390) +#endif + +ENTRY(startup) + +SECTIONS +{ + /* Be careful parts of head_64.S assume startup_32 is at + * address 0. + */ + . = 0; + .head.text : { + _head = . ; + HEAD_TEXT + _ehead = . ; + } + .rodata.compressed : { + *(.rodata.compressed) + } + .text : { + _text = .; /* Text */ + *(.text) + *(.text.*) + _etext = . ; + } + .rodata : { + _rodata = . ; + *(.rodata) /* read-only data */ + *(.rodata.*) + _erodata = . ; + } + .data : { + _data = . ; + *(.data) + *(.data.*) + _edata = . ; + } + . = ALIGN(256); + .bss : { + _bss = . ; + *(.bss) + *(.bss.*) + *(COMMON) + . = ALIGN(8); /* For convenience during zeroing */ + _ebss = .; + } + _end = .; +} diff --git a/arch/s390/boot/compressed/vmlinux.scr b/arch/s390/boot/compressed/vmlinux.scr new file mode 100644 index 00000000000..f02382ae5c4 --- /dev/null +++ b/arch/s390/boot/compressed/vmlinux.scr @@ -0,0 +1,10 @@ +SECTIONS +{ + .rodata.compressed : { + input_len = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + output_len = . - 4; + input_data_end = .; + } +} diff --git a/arch/s390/defconfig b/arch/s390/defconfig index b416aa11b91..7ae71cc5697 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -36,6 +36,13 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_BZIP2=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y diff --git a/arch/s390/hypfs/hypfs_diag.c b/arch/s390/hypfs/hypfs_diag.c index 2b92d501425..87cf523192e 100644 --- a/arch/s390/hypfs/hypfs_diag.c +++ b/arch/s390/hypfs/hypfs_diag.c @@ -488,7 +488,7 @@ out: static int diag224(void *ptr) { - int rc = -ENOTSUPP; + int rc = -EOPNOTSUPP; asm volatile( " diag %1,%2,0x224\n" @@ -507,7 +507,7 @@ static int diag224_get_name_table(void) return -ENOMEM; if (diag224(diag224_cpu_names)) { kfree(diag224_cpu_names); - return -ENOTSUPP; + return -EOPNOTSUPP; } EBCASC(diag224_cpu_names + 16, (*diag224_cpu_names + 1) * 16); return 0; diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 2a113d6a7df..451bfbb9db3 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -18,8 +18,6 @@ #define ATOMIC_INIT(i) { (i) } -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - #define __CS_LOOP(ptr, op_val, op_string) ({ \ int old_val, new_val; \ asm volatile( \ @@ -35,26 +33,6 @@ new_val; \ }) -#else /* __GNUC__ */ - -#define __CS_LOOP(ptr, op_val, op_string) ({ \ - int old_val, new_val; \ - asm volatile( \ - " l %0,0(%3)\n" \ - "0: lr %1,%0\n" \ - op_string " %1,%4\n" \ - " cs %0,%1,0(%3)\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=m" (((atomic_t *)(ptr))->counter) \ - : "a" (ptr), "d" (op_val), \ - "m" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory"); \ - new_val; \ -}) - -#endif /* __GNUC__ */ - static inline int atomic_read(const atomic_t *v) { barrier(); @@ -101,19 +79,11 @@ static inline void atomic_set_mask(unsigned long mask, atomic_t *v) static inline int atomic_cmpxchg(atomic_t *v, int old, int new) { -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) asm volatile( " cs %0,%2,%1" : "+d" (old), "=Q" (v->counter) : "d" (new), "Q" (v->counter) : "cc", "memory"); -#else /* __GNUC__ */ - asm volatile( - " cs %0,%3,0(%2)" - : "+d" (old), "=m" (v->counter) - : "a" (v), "d" (new), "m" (v->counter) - : "cc", "memory"); -#endif /* __GNUC__ */ return old; } @@ -140,8 +110,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) #ifdef CONFIG_64BIT -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - #define __CSG_LOOP(ptr, op_val, op_string) ({ \ long long old_val, new_val; \ asm volatile( \ @@ -157,26 +125,6 @@ static inline int atomic_add_unless(atomic_t *v, int a, int u) new_val; \ }) -#else /* __GNUC__ */ - -#define __CSG_LOOP(ptr, op_val, op_string) ({ \ - long long old_val, new_val; \ - asm volatile( \ - " lg %0,0(%3)\n" \ - "0: lgr %1,%0\n" \ - op_string " %1,%4\n" \ - " csg %0,%1,0(%3)\n" \ - " jl 0b" \ - : "=&d" (old_val), "=&d" (new_val), \ - "=m" (((atomic_t *)(ptr))->counter) \ - : "a" (ptr), "d" (op_val), \ - "m" (((atomic_t *)(ptr))->counter) \ - : "cc", "memory"); \ - new_val; \ -}) - -#endif /* __GNUC__ */ - static inline long long atomic64_read(const atomic64_t *v) { barrier(); @@ -214,19 +162,11 @@ static inline void atomic64_set_mask(unsigned long mask, atomic64_t *v) static inline long long atomic64_cmpxchg(atomic64_t *v, long long old, long long new) { -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) asm volatile( " csg %0,%2,%1" : "+d" (old), "=Q" (v->counter) : "d" (new), "Q" (v->counter) : "cc", "memory"); -#else /* __GNUC__ */ - asm volatile( - " csg %0,%3,0(%2)" - : "+d" (old), "=m" (v->counter) - : "a" (v), "d" (new), "m" (v->counter) - : "cc", "memory"); -#endif /* __GNUC__ */ return old; } @@ -243,10 +183,8 @@ static inline long long atomic64_read(const atomic64_t *v) register_pair rp; asm volatile( - " lm %0,%N0,0(%1)" - : "=&d" (rp) - : "a" (&v->counter), "m" (v->counter) - ); + " lm %0,%N0,%1" + : "=&d" (rp) : "Q" (v->counter) ); return rp.pair; } @@ -255,10 +193,8 @@ static inline void atomic64_set(atomic64_t *v, long long i) register_pair rp = {.pair = i}; asm volatile( - " stm %1,%N1,0(%2)" - : "=m" (v->counter) - : "d" (rp), "a" (&v->counter) - ); + " stm %1,%N1,%0" + : "=Q" (v->counter) : "d" (rp) ); } static inline long long atomic64_xchg(atomic64_t *v, long long new) @@ -267,11 +203,11 @@ static inline long long atomic64_xchg(atomic64_t *v, long long new) register_pair rp_old; asm volatile( - " lm %0,%N0,0(%2)\n" - "0: cds %0,%3,0(%2)\n" + " lm %0,%N0,%1\n" + "0: cds %0,%2,%1\n" " jl 0b\n" - : "=&d" (rp_old), "+m" (v->counter) - : "a" (&v->counter), "d" (rp_new) + : "=&d" (rp_old), "=Q" (v->counter) + : "d" (rp_new), "Q" (v->counter) : "cc"); return rp_old.pair; } @@ -283,9 +219,9 @@ static inline long long atomic64_cmpxchg(atomic64_t *v, register_pair rp_new = {.pair = new}; asm volatile( - " cds %0,%3,0(%2)" - : "+&d" (rp_old), "+m" (v->counter) - : "a" (&v->counter), "d" (rp_new) + " cds %0,%2,%1" + : "+&d" (rp_old), "=Q" (v->counter) + : "d" (rp_new), "Q" (v->counter) : "cc"); return rp_old.pair; } diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index b30606f6d52..2e05972c508 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -71,8 +71,6 @@ extern const char _sb_findmap[]; #define __BITOPS_AND "nr" #define __BITOPS_XOR "xr" -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - #define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ asm volatile( \ " l %0,%2\n" \ @@ -85,22 +83,6 @@ extern const char _sb_findmap[]; : "d" (__val), "Q" (*(unsigned long *) __addr) \ : "cc"); -#else /* __GNUC__ */ - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " l %0,0(%4)\n" \ - "0: lr %1,%0\n" \ - __op_string " %1,%3\n" \ - " cs %0,%1,0(%4)\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=m" (*(unsigned long *) __addr) \ - : "d" (__val), "a" (__addr), \ - "m" (*(unsigned long *) __addr) : "cc"); - -#endif /* __GNUC__ */ - #else /* __s390x__ */ #define __BITOPS_ALIGN 7 @@ -109,8 +91,6 @@ extern const char _sb_findmap[]; #define __BITOPS_AND "ngr" #define __BITOPS_XOR "xgr" -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - #define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ asm volatile( \ " lg %0,%2\n" \ @@ -123,23 +103,6 @@ extern const char _sb_findmap[]; : "d" (__val), "Q" (*(unsigned long *) __addr) \ : "cc"); -#else /* __GNUC__ */ - -#define __BITOPS_LOOP(__old, __new, __addr, __val, __op_string) \ - asm volatile( \ - " lg %0,0(%4)\n" \ - "0: lgr %1,%0\n" \ - __op_string " %1,%3\n" \ - " csg %0,%1,0(%4)\n" \ - " jl 0b" \ - : "=&d" (__old), "=&d" (__new), \ - "=m" (*(unsigned long *) __addr) \ - : "d" (__val), "a" (__addr), \ - "m" (*(unsigned long *) __addr) : "cc"); - - -#endif /* __GNUC__ */ - #endif /* __s390x__ */ #define __BITOPS_WORDS(bits) (((bits)+__BITOPS_WORDSIZE-1)/__BITOPS_WORDSIZE) @@ -261,9 +224,8 @@ static inline void __set_bit(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); asm volatile( - " oc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); + " oc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" ); } static inline void @@ -290,9 +252,8 @@ __clear_bit(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); asm volatile( - " nc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_ni_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc"); + " nc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) : "cc" ); } static inline void @@ -318,9 +279,8 @@ static inline void __change_bit(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); asm volatile( - " xc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) : "a" (addr), - "a" (_oi_bitmap + (nr & 7)), "m" (*(char *) addr) : "cc" ); + " xc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) : "cc" ); } static inline void @@ -349,10 +309,9 @@ test_and_set_bit_simple(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); ch = *(unsigned char *) addr; asm volatile( - " oc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_oi_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); + " oc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) + : "cc", "memory"); return (ch >> (nr & 7)) & 1; } #define __test_and_set_bit(X,Y) test_and_set_bit_simple(X,Y) @@ -369,10 +328,9 @@ test_and_clear_bit_simple(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); ch = *(unsigned char *) addr; asm volatile( - " nc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_ni_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); + " nc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_ni_bitmap[nr & 7]) + : "cc", "memory"); return (ch >> (nr & 7)) & 1; } #define __test_and_clear_bit(X,Y) test_and_clear_bit_simple(X,Y) @@ -389,10 +347,9 @@ test_and_change_bit_simple(unsigned long nr, volatile unsigned long *ptr) addr = (unsigned long) ptr + ((nr ^ (__BITOPS_WORDSIZE - 8)) >> 3); ch = *(unsigned char *) addr; asm volatile( - " xc 0(1,%1),0(%2)" - : "=m" (*(char *) addr) - : "a" (addr), "a" (_oi_bitmap + (nr & 7)), - "m" (*(char *) addr) : "cc", "memory"); + " xc %O0(1,%R0),%1" + : "=Q" (*(char *) addr) : "Q" (_oi_bitmap[nr & 7]) + : "cc", "memory"); return (ch >> (nr & 7)) & 1; } #define __test_and_change_bit(X,Y) test_and_change_bit_simple(X,Y) @@ -591,11 +548,11 @@ static inline unsigned long __load_ulong_le(const unsigned long *p, p = (unsigned long *)((unsigned long) p + offset); #ifndef __s390x__ asm volatile( - " ic %0,0(%1)\n" - " icm %0,2,1(%1)\n" - " icm %0,4,2(%1)\n" - " icm %0,8,3(%1)" - : "=&d" (word) : "a" (p), "m" (*p) : "cc"); + " ic %0,%O1(%R1)\n" + " icm %0,2,%O1+1(%R1)\n" + " icm %0,4,%O1+2(%R1)\n" + " icm %0,8,%O1+3(%R1)" + : "=&d" (word) : "Q" (*p) : "cc"); #else asm volatile( " lrvg %0,%1" diff --git a/arch/s390/include/asm/bug.h b/arch/s390/include/asm/bug.h index b1066b9fb5f..9beeb9db9b2 100644 --- a/arch/s390/include/asm/bug.h +++ b/arch/s390/include/asm/bug.h @@ -5,12 +5,6 @@ #ifdef CONFIG_BUG -#ifdef CONFIG_64BIT -#define S390_LONG ".quad" -#else -#define S390_LONG ".long" -#endif - #ifdef CONFIG_DEBUG_BUGVERBOSE #define __EMIT_BUG(x) do { \ @@ -21,7 +15,7 @@ "2: .asciz \""__FILE__"\"\n" \ ".previous\n" \ ".section __bug_table,\"a\"\n" \ - "3:\t" S390_LONG "\t1b,2b\n" \ + "3: .long 1b-3b,2b-3b\n" \ " .short %0,%1\n" \ " .org 3b+%2\n" \ ".previous\n" \ @@ -37,7 +31,7 @@ "0: j 0b+2\n" \ "1:\n" \ ".section __bug_table,\"a\"\n" \ - "2:\t" S390_LONG "\t1b\n" \ + "2: .long 1b-2b\n" \ " .short %0\n" \ " .org 2b+%1\n" \ ".previous\n" \ diff --git a/arch/s390/include/asm/crw.h b/arch/s390/include/asm/crw.h index 2185a6d619d..749a97e61be 100644 --- a/arch/s390/include/asm/crw.h +++ b/arch/s390/include/asm/crw.h @@ -32,6 +32,7 @@ typedef void (*crw_handler_t)(struct crw *, struct crw *, int); extern int crw_register_handler(int rsc, crw_handler_t handler); extern void crw_unregister_handler(int rsc); extern void crw_handle_channel_report(void); +void crw_wait_for_channel_report(void); #define NR_RSCS 16 diff --git a/arch/s390/include/asm/etr.h b/arch/s390/include/asm/etr.h index 80ef58c6197..538e1b36a72 100644 --- a/arch/s390/include/asm/etr.h +++ b/arch/s390/include/asm/etr.h @@ -145,11 +145,11 @@ static inline int etr_setr(struct etr_eacr *ctrl) int rc = -ENOSYS; asm volatile( - " .insn s,0xb2160000,0(%2)\n" + " .insn s,0xb2160000,%1\n" "0: la %0,0\n" "1:\n" EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*ctrl), "a" (ctrl)); + : "+d" (rc) : "Q" (*ctrl)); return rc; } @@ -159,11 +159,11 @@ static inline int etr_stetr(struct etr_aib *aib) int rc = -ENOSYS; asm volatile( - " .insn s,0xb2170000,0(%2)\n" + " .insn s,0xb2170000,%1\n" "0: la %0,0\n" "1:\n" EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*aib), "a" (aib)); + : "+d" (rc) : "Q" (*aib)); return rc; } @@ -174,11 +174,11 @@ static inline int etr_steai(struct etr_aib *aib, unsigned int func) int rc = -ENOSYS; asm volatile( - " .insn s,0xb2b30000,0(%2)\n" + " .insn s,0xb2b30000,%1\n" "0: la %0,0\n" "1:\n" EX_TABLE(0b,1b) - : "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0)); + : "+d" (rc) : "Q" (*aib), "d" (reg0)); return rc; } diff --git a/arch/s390/include/asm/irqflags.h b/arch/s390/include/asm/irqflags.h index c2fb432f576..15b3ac25389 100644 --- a/arch/s390/include/asm/irqflags.h +++ b/arch/s390/include/asm/irqflags.h @@ -8,8 +8,6 @@ #include <linux/types.h> -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - /* store then or system mask. */ #define __raw_local_irq_stosm(__or) \ ({ \ @@ -36,40 +34,6 @@ asm volatile("ssm %0" : : "Q" (__mask) : "memory"); \ }) -#else /* __GNUC__ */ - -/* store then or system mask. */ -#define __raw_local_irq_stosm(__or) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stosm 0(%1),%2" \ - : "=m" (__mask) \ - : "a" (&__mask), "i" (__or) : "memory"); \ - __mask; \ -}) - -/* store then and system mask. */ -#define __raw_local_irq_stnsm(__and) \ -({ \ - unsigned long __mask; \ - asm volatile( \ - " stnsm 0(%1),%2" \ - : "=m" (__mask) \ - : "a" (&__mask), "i" (__and) : "memory"); \ - __mask; \ -}) - -/* set system mask. */ -#define __raw_local_irq_ssm(__mask) \ -({ \ - asm volatile( \ - " ssm 0(%0)" \ - : : "a" (&__mask), "m" (__mask) : "memory"); \ -}) - -#endif /* __GNUC__ */ - /* interrupt control.. */ static inline unsigned long raw_local_irq_enable(void) { diff --git a/arch/s390/include/asm/lowcore.h b/arch/s390/include/asm/lowcore.h index c25dfac7dd7..05527c040b7 100644 --- a/arch/s390/include/asm/lowcore.h +++ b/arch/s390/include/asm/lowcore.h @@ -1,141 +1,16 @@ /* - * include/asm-s390/lowcore.h - * - * S390 version - * Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Hartmut Penner (hp@de.ibm.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com), - * Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com) + * Copyright IBM Corp. 1999,2010 + * Author(s): Hartmut Penner <hp@de.ibm.com>, + * Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Denis Joseph Barrow, */ #ifndef _ASM_S390_LOWCORE_H #define _ASM_S390_LOWCORE_H -#define __LC_IPL_PARMBLOCK_PTR 0x0014 -#define __LC_EXT_PARAMS 0x0080 -#define __LC_CPU_ADDRESS 0x0084 -#define __LC_EXT_INT_CODE 0x0086 - -#define __LC_SVC_ILC 0x0088 -#define __LC_SVC_INT_CODE 0x008a -#define __LC_PGM_ILC 0x008c -#define __LC_PGM_INT_CODE 0x008e - -#define __LC_PER_ATMID 0x0096 -#define __LC_PER_ADDRESS 0x0098 -#define __LC_PER_ACCESS_ID 0x00a1 -#define __LC_AR_MODE_ID 0x00a3 - -#define __LC_SUBCHANNEL_ID 0x00b8 -#define __LC_SUBCHANNEL_NR 0x00ba -#define __LC_IO_INT_PARM 0x00bc -#define __LC_IO_INT_WORD 0x00c0 -#define __LC_STFL_FAC_LIST 0x00c8 -#define __LC_MCCK_CODE 0x00e8 - -#define __LC_DUMP_REIPL 0x0e00 - -#ifndef __s390x__ -#define __LC_EXT_OLD_PSW 0x0018 -#define __LC_SVC_OLD_PSW 0x0020 -#define __LC_PGM_OLD_PSW 0x0028 -#define __LC_MCK_OLD_PSW 0x0030 -#define __LC_IO_OLD_PSW 0x0038 -#define __LC_EXT_NEW_PSW 0x0058 -#define __LC_SVC_NEW_PSW 0x0060 -#define __LC_PGM_NEW_PSW 0x0068 -#define __LC_MCK_NEW_PSW 0x0070 -#define __LC_IO_NEW_PSW 0x0078 -#define __LC_SAVE_AREA 0x0200 -#define __LC_RETURN_PSW 0x0240 -#define __LC_RETURN_MCCK_PSW 0x0248 -#define __LC_SYNC_ENTER_TIMER 0x0250 -#define __LC_ASYNC_ENTER_TIMER 0x0258 -#define __LC_EXIT_TIMER 0x0260 -#define __LC_USER_TIMER 0x0268 -#define __LC_SYSTEM_TIMER 0x0270 -#define __LC_STEAL_TIMER 0x0278 -#define __LC_LAST_UPDATE_TIMER 0x0280 -#define __LC_LAST_UPDATE_CLOCK 0x0288 -#define __LC_CURRENT 0x0290 -#define __LC_THREAD_INFO 0x0294 -#define __LC_KERNEL_STACK 0x0298 -#define __LC_ASYNC_STACK 0x029c -#define __LC_PANIC_STACK 0x02a0 -#define __LC_KERNEL_ASCE 0x02a4 -#define __LC_USER_ASCE 0x02a8 -#define __LC_USER_EXEC_ASCE 0x02ac -#define __LC_CPUID 0x02b0 -#define __LC_INT_CLOCK 0x02c8 -#define __LC_MACHINE_FLAGS 0x02d8 -#define __LC_FTRACE_FUNC 0x02dc -#define __LC_IRB 0x0300 -#define __LC_PFAULT_INTPARM 0x0080 -#define __LC_CPU_TIMER_SAVE_AREA 0x00d8 -#define __LC_CLOCK_COMP_SAVE_AREA 0x00e0 -#define __LC_PSW_SAVE_AREA 0x0100 -#define __LC_PREFIX_SAVE_AREA 0x0108 -#define __LC_AREGS_SAVE_AREA 0x0120 -#define __LC_FPREGS_SAVE_AREA 0x0160 -#define __LC_GPREGS_SAVE_AREA 0x0180 -#define __LC_CREGS_SAVE_AREA 0x01c0 -#else /* __s390x__ */ -#define __LC_LAST_BREAK 0x0110 -#define __LC_EXT_OLD_PSW 0x0130 -#define __LC_SVC_OLD_PSW 0x0140 -#define __LC_PGM_OLD_PSW 0x0150 -#define __LC_MCK_OLD_PSW 0x0160 -#define __LC_IO_OLD_PSW 0x0170 -#define __LC_RESTART_PSW 0x01a0 -#define __LC_EXT_NEW_PSW 0x01b0 -#define __LC_SVC_NEW_PSW 0x01c0 -#define __LC_PGM_NEW_PSW 0x01d0 -#define __LC_MCK_NEW_PSW 0x01e0 -#define __LC_IO_NEW_PSW 0x01f0 -#define __LC_SAVE_AREA 0x0200 -#define __LC_RETURN_PSW 0x0280 -#define __LC_RETURN_MCCK_PSW 0x0290 -#define __LC_SYNC_ENTER_TIMER 0x02a0 -#define __LC_ASYNC_ENTER_TIMER 0x02a8 -#define __LC_EXIT_TIMER 0x02b0 -#define __LC_USER_TIMER 0x02b8 -#define __LC_SYSTEM_TIMER 0x02c0 -#define __LC_STEAL_TIMER 0x02c8 -#define __LC_LAST_UPDATE_TIMER 0x02d0 -#define __LC_LAST_UPDATE_CLOCK 0x02d8 -#define __LC_CURRENT 0x02e0 -#define __LC_THREAD_INFO 0x02e8 -#define __LC_KERNEL_STACK 0x02f0 -#define __LC_ASYNC_STACK 0x02f8 -#define __LC_PANIC_STACK 0x0300 -#define __LC_KERNEL_ASCE 0x0308 -#define __LC_USER_ASCE 0x0310 -#define __LC_USER_EXEC_ASCE 0x0318 -#define __LC_CPUID 0x0320 -#define __LC_INT_CLOCK 0x0340 -#define __LC_VDSO_PER_CPU 0x0350 -#define __LC_MACHINE_FLAGS 0x0358 -#define __LC_FTRACE_FUNC 0x0360 -#define __LC_IRB 0x0380 -#define __LC_PASTE 0x03c0 -#define __LC_PFAULT_INTPARM 0x11b8 -#define __LC_FPREGS_SAVE_AREA 0x1200 -#define __LC_GPREGS_SAVE_AREA 0x1280 -#define __LC_PSW_SAVE_AREA 0x1300 -#define __LC_PREFIX_SAVE_AREA 0x1318 -#define __LC_FP_CREG_SAVE_AREA 0x131c -#define __LC_TODREG_SAVE_AREA 0x1324 -#define __LC_CPU_TIMER_SAVE_AREA 0x1328 -#define __LC_CLOCK_COMP_SAVE_AREA 0x1331 -#define __LC_AREGS_SAVE_AREA 0x1340 -#define __LC_CREGS_SAVE_AREA 0x1380 -#endif /* __s390x__ */ - -#ifndef __ASSEMBLY__ - -#include <asm/cpu.h> -#include <asm/ptrace.h> #include <linux/types.h> +#include <asm/ptrace.h> +#include <asm/cpu.h> void restart_int_handler(void); void ext_int_handler(void); @@ -144,7 +19,12 @@ void pgm_check_handler(void); void mcck_int_handler(void); void io_int_handler(void); -struct save_area_s390 { +#ifdef CONFIG_32BIT + +#define LC_ORDER 0 +#define LC_PAGES 1 + +struct save_area { u32 ext_save; u64 timer; u64 clk_cmp; @@ -156,54 +36,13 @@ struct save_area_s390 { u64 fp_regs[4]; u32 gp_regs[16]; u32 ctrl_regs[16]; -} __attribute__((packed)); +} __packed; -struct save_area_s390x { - u64 fp_regs[16]; - u64 gp_regs[16]; - u8 psw[16]; - u8 pad1[8]; - u32 pref_reg; - u32 fp_ctrl_reg; - u8 pad2[4]; - u32 tod_reg; - u64 timer; - u64 clk_cmp; - u8 pad3[8]; - u32 acc_regs[16]; - u64 ctrl_regs[16]; -} __attribute__((packed)); - -union save_area { - struct save_area_s390 s390; - struct save_area_s390x s390x; -}; - -#define SAVE_AREA_BASE_S390 0xd4 -#define SAVE_AREA_BASE_S390X 0x1200 - -#ifndef __s390x__ -#define SAVE_AREA_SIZE sizeof(struct save_area_s390) -#define SAVE_AREA_BASE SAVE_AREA_BASE_S390 -#else -#define SAVE_AREA_SIZE sizeof(struct save_area_s390x) -#define SAVE_AREA_BASE SAVE_AREA_BASE_S390X -#endif - -#ifndef __s390x__ -#define LC_ORDER 0 -#else -#define LC_ORDER 1 -#endif - -#define LC_PAGES (1UL << LC_ORDER) - -struct _lowcore -{ -#ifndef __s390x__ - /* 0x0000 - 0x01ff: defined by architecture */ +struct _lowcore { psw_t restart_psw; /* 0x0000 */ - __u32 ccw2[4]; /* 0x0008 */ + psw_t restart_old_psw; /* 0x0008 */ + __u8 pad_0x0010[0x0014-0x0010]; /* 0x0010 */ + __u32 ipl_parmblock_ptr; /* 0x0014 */ psw_t external_old_psw; /* 0x0018 */ psw_t svc_old_psw; /* 0x0020 */ psw_t program_old_psw; /* 0x0028 */ @@ -229,7 +68,9 @@ struct _lowcore __u32 monitor_code; /* 0x009c */ __u8 exc_access_id; /* 0x00a0 */ __u8 per_access_id; /* 0x00a1 */ - __u8 pad_0x00a2[0x00b8-0x00a2]; /* 0x00a2 */ + __u8 op_access_id; /* 0x00a2 */ + __u8 ar_access_id; /* 0x00a3 */ + __u8 pad_0x00a4[0x00b8-0x00a4]; /* 0x00a4 */ __u16 subchannel_id; /* 0x00b8 */ __u16 subchannel_nr; /* 0x00ba */ __u32 io_int_parm; /* 0x00bc */ @@ -245,8 +86,9 @@ struct _lowcore __u32 external_damage_code; /* 0x00f4 */ __u32 failing_storage_address; /* 0x00f8 */ __u8 pad_0x00fc[0x0100-0x00fc]; /* 0x00fc */ - __u32 st_status_fixed_logout[4]; /* 0x0100 */ - __u8 pad_0x0110[0x0120-0x0110]; /* 0x0110 */ + psw_t psw_save_area; /* 0x0100 */ + __u32 prefixreg_save_area; /* 0x0108 */ + __u8 pad_0x010c[0x0120-0x010c]; /* 0x010c */ /* CPU register save area: defined by architecture */ __u32 access_regs_save_area[16]; /* 0x0120 */ @@ -310,10 +152,32 @@ struct _lowcore /* Align to the top 1k of prefix area */ __u8 pad_0x0e08[0x1000-0x0e08]; /* 0x0e08 */ -#else /* !__s390x__ */ - /* 0x0000 - 0x01ff: defined by architecture */ - __u32 ccw1[2]; /* 0x0000 */ - __u32 ccw2[4]; /* 0x0008 */ +} __packed; + +#else /* CONFIG_32BIT */ + +#define LC_ORDER 1 +#define LC_PAGES 2 + +struct save_area { + u64 fp_regs[16]; + u64 gp_regs[16]; + u8 psw[16]; + u8 pad1[8]; + u32 pref_reg; + u32 fp_ctrl_reg; + u8 pad2[4]; + u32 tod_reg; + u64 timer; + u64 clk_cmp; + u8 pad3[8]; + u32 acc_regs[16]; + u64 ctrl_regs[16]; +} __packed; + +struct _lowcore { + __u8 pad_0x0000[0x0014-0x0000]; /* 0x0000 */ + __u32 ipl_parmblock_ptr; /* 0x0014 */ __u8 pad_0x0018[0x0080-0x0018]; /* 0x0018 */ __u32 ext_params; /* 0x0080 */ __u16 cpu_addr; /* 0x0084 */ @@ -344,7 +208,9 @@ struct _lowcore __u8 pad_0x00f0[0x00f4-0x00f0]; /* 0x00f0 */ __u32 external_damage_code; /* 0x00f4 */ addr_t failing_storage_address; /* 0x00f8 */ - __u8 pad_0x0100[0x0120-0x0100]; /* 0x0100 */ + __u8 pad_0x0100[0x0110-0x0100]; /* 0x0100 */ + __u64 breaking_event_addr; /* 0x0110 */ + __u8 pad_0x0118[0x0120-0x0118]; /* 0x0118 */ psw_t restart_old_psw; /* 0x0120 */ psw_t external_old_psw; /* 0x0130 */ psw_t svc_old_psw; /* 0x0140 */ @@ -425,7 +291,7 @@ struct _lowcore /* CPU register save area: defined by architecture */ __u64 floating_pt_save_area[16]; /* 0x1200 */ __u64 gpregs_save_area[16]; /* 0x1280 */ - __u32 st_status_fixed_logout[4]; /* 0x1300 */ + psw_t psw_save_area; /* 0x1300 */ __u8 pad_0x1310[0x1318-0x1310]; /* 0x1310 */ __u32 prefixreg_save_area; /* 0x1318 */ __u32 fpt_creg_save_area; /* 0x131c */ @@ -439,10 +305,12 @@ struct _lowcore /* align to the top of the prefix area */ __u8 pad_0x1400[0x2000-0x1400]; /* 0x1400 */ -#endif /* !__s390x__ */ -} __attribute__((packed)); /* End structure*/ +} __packed; + +#endif /* CONFIG_32BIT */ #define S390_lowcore (*((struct _lowcore *) 0)) + extern struct _lowcore *lowcore_ptr[]; static inline void set_prefix(__u32 address) @@ -458,6 +326,4 @@ static inline __u32 store_prefix(void) return address; } -#endif - -#endif +#endif /* _ASM_S390_LOWCORE_H */ diff --git a/arch/s390/include/asm/page.h b/arch/s390/include/asm/page.h index 5e9daf5d7f2..af650fb4720 100644 --- a/arch/s390/include/asm/page.h +++ b/arch/s390/include/asm/page.h @@ -107,9 +107,6 @@ typedef pte_t *pgtable_t; #define __pgd(x) ((pgd_t) { (x) } ) #define __pgprot(x) ((pgprot_t) { (x) } ) -/* default storage key used for all pages */ -extern unsigned int default_storage_key; - static inline void page_set_storage_key(unsigned long addr, unsigned int skey) { diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h index b4271545831..73e259834e1 100644 --- a/arch/s390/include/asm/processor.h +++ b/arch/s390/include/asm/processor.h @@ -28,7 +28,7 @@ static inline void get_cpu_id(struct cpuid *ptr) { - asm volatile("stidp 0(%1)" : "=m" (*ptr) : "a" (ptr)); + asm volatile("stidp %0" : "=Q" (*ptr)); } extern void s390_adjust_jiffies(void); @@ -184,9 +184,9 @@ static inline void psw_set_key(unsigned int key) static inline void __load_psw(psw_t psw) { #ifndef __s390x__ - asm volatile("lpsw 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); + asm volatile("lpsw %0" : : "Q" (psw) : "cc"); #else - asm volatile("lpswe 0(%0)" : : "a" (&psw), "m" (psw) : "cc"); + asm volatile("lpswe %0" : : "Q" (psw) : "cc"); #endif } @@ -206,17 +206,17 @@ static inline void __load_psw_mask (unsigned long mask) asm volatile( " basr %0,0\n" "0: ahi %0,1f-0b\n" - " st %0,4(%1)\n" - " lpsw 0(%1)\n" + " st %0,%O1+4(%R1)\n" + " lpsw %1\n" "1:" - : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); + : "=&d" (addr), "=Q" (psw) : "Q" (psw) : "memory", "cc"); #else /* __s390x__ */ asm volatile( " larl %0,1f\n" - " stg %0,8(%1)\n" - " lpswe 0(%1)\n" + " stg %0,%O1+8(%R1)\n" + " lpswe %1\n" "1:" - : "=&d" (addr) : "a" (&psw), "m" (psw) : "memory", "cc"); + : "=&d" (addr), "=Q" (psw) : "Q" (psw) : "memory", "cc"); #endif /* __s390x__ */ } diff --git a/arch/s390/include/asm/qdio.h b/arch/s390/include/asm/qdio.h index 79d849f014f..c666bfe5e98 100644 --- a/arch/s390/include/asm/qdio.h +++ b/arch/s390/include/asm/qdio.h @@ -13,7 +13,8 @@ #include <asm/cio.h> #include <asm/ccwdev.h> -#define QDIO_MAX_QUEUES_PER_IRQ 32 +/* only use 4 queues to save some cachelines */ +#define QDIO_MAX_QUEUES_PER_IRQ 4 #define QDIO_MAX_BUFFERS_PER_Q 128 #define QDIO_MAX_BUFFERS_MASK (QDIO_MAX_BUFFERS_PER_Q - 1) #define QDIO_MAX_ELEMENTS_PER_BUFFER 16 diff --git a/arch/s390/include/asm/rwsem.h b/arch/s390/include/asm/rwsem.h index 9d2a1797180..423fdda2322 100644 --- a/arch/s390/include/asm/rwsem.h +++ b/arch/s390/include/asm/rwsem.h @@ -124,21 +124,21 @@ static inline void __down_read(struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" + " ahi %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" + " aghi %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "i" (RWSEM_ACTIVE_READ_BIAS) + : "cc", "memory"); if (old < 0) rwsem_down_read_failed(sem); } @@ -152,25 +152,25 @@ static inline int __down_read_trylock(struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: ltr %1,%0\n" " jm 1f\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" + " ahi %1,%4\n" + " cs %0,%1,%2\n" " jl 0b\n" "1:" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: ltgr %1,%0\n" " jm 1f\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" + " aghi %1,%4\n" + " csg %0,%1,%2\n" " jl 0b\n" "1:" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "i" (RWSEM_ACTIVE_READ_BIAS) + : "cc", "memory"); return old >= 0 ? 1 : 0; } @@ -184,20 +184,20 @@ static inline void __down_write_nested(struct rw_semaphore *sem, int subclass) tmp = RWSEM_ACTIVE_WRITE_BIAS; asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" + " a %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" + " ag %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "m" (tmp) : "cc", "memory"); if (old != 0) rwsem_down_write_failed(sem); @@ -217,22 +217,22 @@ static inline int __down_write_trylock(struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%2)\n" + " l %0,%1\n" "0: ltr %0,%0\n" " jnz 1f\n" - " cs %0,%4,0(%2)\n" + " cs %0,%3,%1\n" " jl 0b\n" #else /* __s390x__ */ - " lg %0,0(%2)\n" + " lg %0,%1\n" "0: ltgr %0,%0\n" " jnz 1f\n" - " csg %0,%4,0(%2)\n" + " csg %0,%3,%1\n" " jl 0b\n" #endif /* __s390x__ */ "1:" - : "=&d" (old), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "d" (RWSEM_ACTIVE_WRITE_BIAS) : "cc", "memory"); + : "=&d" (old), "=Q" (sem->count) + : "Q" (sem->count), "d" (RWSEM_ACTIVE_WRITE_BIAS) + : "cc", "memory"); return (old == RWSEM_UNLOCKED_VALUE) ? 1 : 0; } @@ -245,21 +245,20 @@ static inline void __up_read(struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " ahi %1,%5\n" - " cs %0,%1,0(%3)\n" + " ahi %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " aghi %1,%5\n" - " csg %0,%1,0(%3)\n" + " aghi %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), - "i" (-RWSEM_ACTIVE_READ_BIAS) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "i" (-RWSEM_ACTIVE_READ_BIAS) : "cc", "memory"); if (new < 0) if ((new & RWSEM_ACTIVE_MASK) == 0) @@ -276,20 +275,20 @@ static inline void __up_write(struct rw_semaphore *sem) tmp = -RWSEM_ACTIVE_WRITE_BIAS; asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" + " a %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" + " ag %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "m" (tmp) : "cc", "memory"); if (new < 0) if ((new & RWSEM_ACTIVE_MASK) == 0) @@ -306,20 +305,20 @@ static inline void __downgrade_write(struct rw_semaphore *sem) tmp = -RWSEM_WAITING_BIAS; asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " a %1,%5\n" - " cs %0,%1,0(%3)\n" + " a %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " ag %1,%5\n" - " csg %0,%1,0(%3)\n" + " ag %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "m" (tmp) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "m" (tmp) : "cc", "memory"); if (new > 1) rwsem_downgrade_wake(sem); @@ -334,20 +333,20 @@ static inline void rwsem_atomic_add(long delta, struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " ar %1,%5\n" - " cs %0,%1,0(%3)\n" + " ar %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " agr %1,%5\n" - " csg %0,%1,0(%3)\n" + " agr %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "d" (delta) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "d" (delta) : "cc", "memory"); } @@ -360,20 +359,20 @@ static inline long rwsem_atomic_update(long delta, struct rw_semaphore *sem) asm volatile( #ifndef __s390x__ - " l %0,0(%3)\n" + " l %0,%2\n" "0: lr %1,%0\n" - " ar %1,%5\n" - " cs %0,%1,0(%3)\n" + " ar %1,%4\n" + " cs %0,%1,%2\n" " jl 0b" #else /* __s390x__ */ - " lg %0,0(%3)\n" + " lg %0,%2\n" "0: lgr %1,%0\n" - " agr %1,%5\n" - " csg %0,%1,0(%3)\n" + " agr %1,%4\n" + " csg %0,%1,%2\n" " jl 0b" #endif /* __s390x__ */ - : "=&d" (old), "=&d" (new), "=m" (sem->count) - : "a" (&sem->count), "m" (sem->count), "d" (delta) + : "=&d" (old), "=&d" (new), "=Q" (sem->count) + : "Q" (sem->count), "d" (delta) : "cc", "memory"); return new; } diff --git a/arch/s390/include/asm/setup.h b/arch/s390/include/asm/setup.h index 52a779c337e..9ab6bd3a65d 100644 --- a/arch/s390/include/asm/setup.h +++ b/arch/s390/include/asm/setup.h @@ -14,14 +14,14 @@ #ifdef __KERNEL__ -#include <asm/lowcore.h> -#include <asm/types.h> - #define PARMAREA 0x10400 #define MEMORY_CHUNKS 256 #ifndef __ASSEMBLY__ +#include <asm/lowcore.h> +#include <asm/types.h> + #ifndef __s390x__ #define IPL_DEVICE (*(unsigned long *) (0x10404)) #define INITRD_START (*(unsigned long *) (0x1040C)) @@ -71,9 +71,12 @@ extern unsigned int user_mode; #define MACHINE_FLAG_KVM (1UL << 9) #define MACHINE_FLAG_HPAGE (1UL << 10) #define MACHINE_FLAG_PFMF (1UL << 11) +#define MACHINE_FLAG_LPAR (1UL << 12) #define MACHINE_IS_VM (S390_lowcore.machine_flags & MACHINE_FLAG_VM) #define MACHINE_IS_KVM (S390_lowcore.machine_flags & MACHINE_FLAG_KVM) +#define MACHINE_IS_LPAR (S390_lowcore.machine_flags & MACHINE_FLAG_LPAR) + #define MACHINE_HAS_DIAG9C (S390_lowcore.machine_flags & MACHINE_FLAG_DIAG9C) #ifndef __s390x__ diff --git a/arch/s390/include/asm/sigp.h b/arch/s390/include/asm/sigp.h index f72d611f7e1..e3bffd4e2d6 100644 --- a/arch/s390/include/asm/sigp.h +++ b/arch/s390/include/asm/sigp.h @@ -1,24 +1,19 @@ /* - * include/asm-s390/sigp.h + * Routines and structures for signalling other processors. * - * S390 version - * Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Denis Joseph Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com), - * Martin Schwidefsky (schwidefsky@de.ibm.com) - * Heiko Carstens (heiko.carstens@de.ibm.com) - * - * sigp.h by D.J. Barrow (c) IBM 1999 - * contains routines / structures for signalling other S/390 processors in an - * SMP configuration. + * Copyright IBM Corp. 1999,2010 + * Author(s): Denis Joseph Barrow, + * Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Heiko Carstens <heiko.carstens@de.ibm.com>, */ -#ifndef __SIGP__ -#define __SIGP__ +#ifndef __ASM_SIGP_H +#define __ASM_SIGP_H #include <asm/system.h> -/* get real cpu address from logical cpu number */ -extern int __cpu_logical_map[]; +/* Get real cpu address from logical cpu number. */ +extern unsigned short __cpu_logical_map[]; static inline int cpu_logical_map(int cpu) { @@ -29,107 +24,108 @@ static inline int cpu_logical_map(int cpu) #endif } -typedef enum -{ - sigp_unassigned=0x0, - sigp_sense, - sigp_external_call, - sigp_emergency_signal, - sigp_start, - sigp_stop, - sigp_restart, - sigp_unassigned1, - sigp_unassigned2, - sigp_stop_and_store_status, - sigp_unassigned3, - sigp_initial_cpu_reset, - sigp_cpu_reset, - sigp_set_prefix, - sigp_store_status_at_address, - sigp_store_extended_status_at_address -} sigp_order_code; - -typedef __u32 sigp_status_word; - -typedef enum -{ - sigp_order_code_accepted=0, - sigp_status_stored, - sigp_busy, - sigp_not_operational -} sigp_ccode; - +enum { + sigp_sense = 1, + sigp_external_call = 2, + sigp_emergency_signal = 3, + sigp_start = 4, + sigp_stop = 5, + sigp_restart = 6, + sigp_stop_and_store_status = 9, + sigp_initial_cpu_reset = 11, + sigp_cpu_reset = 12, + sigp_set_prefix = 13, + sigp_store_status_at_address = 14, + sigp_store_extended_status_at_address = 15, + sigp_set_architecture = 18, + sigp_conditional_emergency_signal = 19, + sigp_sense_running = 21, +}; + +enum { + sigp_order_code_accepted = 0, + sigp_status_stored = 1, + sigp_busy = 2, + sigp_not_operational = 3, +}; /* - * Definitions for the external call + * Definitions for external call. */ - -/* 'Bit' signals, asynchronous */ -typedef enum -{ - ec_schedule=0, +enum { + ec_schedule = 0, ec_call_function, ec_call_function_single, - ec_bit_last -} ec_bit_sig; +}; /* - * Signal processor + * Signal processor. */ -static inline sigp_ccode -signal_processor(__u16 cpu_addr, sigp_order_code order_code) +static inline int raw_sigp(u16 cpu, int order) { register unsigned long reg1 asm ("1") = 0; - sigp_ccode ccode; + int ccode; asm volatile( " sigp %1,%2,0(%3)\n" " ipm %0\n" " srl %0,28\n" : "=d" (ccode) - : "d" (reg1), "d" (cpu_logical_map(cpu_addr)), - "a" (order_code) : "cc" , "memory"); + : "d" (reg1), "d" (cpu), + "a" (order) : "cc" , "memory"); return ccode; } /* - * Signal processor with parameter + * Signal processor with parameter. */ -static inline sigp_ccode -signal_processor_p(__u32 parameter, __u16 cpu_addr, sigp_order_code order_code) +static inline int raw_sigp_p(u32 parameter, u16 cpu, int order) { register unsigned int reg1 asm ("1") = parameter; - sigp_ccode ccode; + int ccode; asm volatile( " sigp %1,%2,0(%3)\n" " ipm %0\n" " srl %0,28\n" : "=d" (ccode) - : "d" (reg1), "d" (cpu_logical_map(cpu_addr)), - "a" (order_code) : "cc" , "memory"); + : "d" (reg1), "d" (cpu), + "a" (order) : "cc" , "memory"); return ccode; } /* - * Signal processor with parameter and return status + * Signal processor with parameter and return status. */ -static inline sigp_ccode -signal_processor_ps(__u32 *statusptr, __u32 parameter, __u16 cpu_addr, - sigp_order_code order_code) +static inline int raw_sigp_ps(u32 *status, u32 parm, u16 cpu, int order) { - register unsigned int reg1 asm ("1") = parameter; - sigp_ccode ccode; + register unsigned int reg1 asm ("1") = parm; + int ccode; asm volatile( " sigp %1,%2,0(%3)\n" " ipm %0\n" " srl %0,28\n" : "=d" (ccode), "+d" (reg1) - : "d" (cpu_logical_map(cpu_addr)), "a" (order_code) + : "d" (cpu), "a" (order) : "cc" , "memory"); - *statusptr = reg1; + *status = reg1; return ccode; } -#endif /* __SIGP__ */ +static inline int sigp(int cpu, int order) +{ + return raw_sigp(cpu_logical_map(cpu), order); +} + +static inline int sigp_p(u32 parameter, int cpu, int order) +{ + return raw_sigp_p(parameter, cpu_logical_map(cpu), order); +} + +static inline int sigp_ps(u32 *status, u32 parm, int cpu, int order) +{ + return raw_sigp_ps(status, parm, cpu_logical_map(cpu), order); +} + +#endif /* __ASM_SIGP_H */ diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h index 2ab1141eeb5..edc03cb9cd7 100644 --- a/arch/s390/include/asm/smp.h +++ b/arch/s390/include/asm/smp.h @@ -29,7 +29,43 @@ extern int smp_cpu_polarization[]; extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); -extern union save_area *zfcpdump_save_areas[NR_CPUS + 1]; +extern struct save_area *zfcpdump_save_areas[NR_CPUS + 1]; + +extern void smp_switch_to_ipl_cpu(void (*func)(void *), void *); +extern void smp_switch_to_cpu(void (*)(void *), void *, unsigned long sp, + int from, int to); +extern void smp_restart_cpu(void); + +/* + * returns 1 if (virtual) cpu is scheduled + * returns 0 otherwise + */ +static inline int smp_vcpu_scheduled(int cpu) +{ + u32 status; + + switch (sigp_ps(&status, 0, cpu, sigp_sense_running)) { + case sigp_status_stored: + /* Check for running status */ + if (status & 0x400) + return 0; + break; + case sigp_not_operational: + return 0; + default: + break; + } + return 1; +} + +#else /* CONFIG_SMP */ + +static inline void smp_switch_to_ipl_cpu(void (*func)(void *), void *data) +{ + func(data); +} + +#define smp_vcpu_scheduled (1) #endif /* CONFIG_SMP */ diff --git a/arch/s390/include/asm/spinlock.h b/arch/s390/include/asm/spinlock.h index a587907d77f..56612fc8186 100644 --- a/arch/s390/include/asm/spinlock.h +++ b/arch/s390/include/asm/spinlock.h @@ -13,8 +13,6 @@ #include <linux/smp.h> -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) - static inline int _raw_compare_and_swap(volatile unsigned int *lock, unsigned int old, unsigned int new) @@ -27,22 +25,6 @@ _raw_compare_and_swap(volatile unsigned int *lock, return old; } -#else /* __GNUC__ */ - -static inline int -_raw_compare_and_swap(volatile unsigned int *lock, - unsigned int old, unsigned int new) -{ - asm volatile( - " cs %0,%3,0(%4)" - : "=d" (old), "=m" (*lock) - : "0" (old), "d" (new), "a" (lock), "m" (*lock) - : "cc", "memory" ); - return old; -} - -#endif /* __GNUC__ */ - /* * Simple spin lock operations. There are two variants, one clears IRQ's * on the local processor, one does not. diff --git a/arch/s390/include/asm/swab.h b/arch/s390/include/asm/swab.h index eb18dc1f327..6bdee21c077 100644 --- a/arch/s390/include/asm/swab.h +++ b/arch/s390/include/asm/swab.h @@ -47,11 +47,11 @@ static inline __u32 __arch_swab32p(const __u32 *x) asm volatile( #ifndef __s390x__ - " icm %0,8,3(%1)\n" - " icm %0,4,2(%1)\n" - " icm %0,2,1(%1)\n" - " ic %0,0(%1)" - : "=&d" (result) : "a" (x), "m" (*x) : "cc"); + " icm %0,8,%O1+3(%R1)\n" + " icm %0,4,%O1+2(%R1)\n" + " icm %0,2,%O1+1(%R1)\n" + " ic %0,%1" + : "=&d" (result) : "Q" (*x) : "cc"); #else /* __s390x__ */ " lrv %0,%1" : "=d" (result) : "m" (*x)); @@ -77,9 +77,9 @@ static inline __u16 __arch_swab16p(const __u16 *x) asm volatile( #ifndef __s390x__ - " icm %0,2,1(%1)\n" - " ic %0,0(%1)\n" - : "=&d" (result) : "a" (x), "m" (*x) : "cc"); + " icm %0,2,%O+1(%R1)\n" + " ic %0,%1\n" + : "=&d" (result) : "Q" (*x) : "cc"); #else /* __s390x__ */ " lrvh %0,%1" : "=d" (result) : "m" (*x)); diff --git a/arch/s390/include/asm/sysinfo.h b/arch/s390/include/asm/sysinfo.h index 9d70057d828..22bdb2a0ee5 100644 --- a/arch/s390/include/asm/sysinfo.h +++ b/arch/s390/include/asm/sysinfo.h @@ -87,7 +87,8 @@ struct sysinfo_2_2_2 { struct sysinfo_3_2_2 { char reserved_0[31]; - unsigned char count; + unsigned char :4; + unsigned char count:4; struct { char reserved_0[4]; unsigned short cpus_total; diff --git a/arch/s390/include/asm/system.h b/arch/s390/include/asm/system.h index 379661d2f81..67ee6c3c6bb 100644 --- a/arch/s390/include/asm/system.h +++ b/arch/s390/include/asm/system.h @@ -24,65 +24,65 @@ extern struct task_struct *__switch_to(void *, void *); static inline void save_fp_regs(s390_fp_regs *fpregs) { asm volatile( - " std 0,8(%1)\n" - " std 2,24(%1)\n" - " std 4,40(%1)\n" - " std 6,56(%1)" - : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); + " std 0,%O0+8(%R0)\n" + " std 2,%O0+24(%R0)\n" + " std 4,%O0+40(%R0)\n" + " std 6,%O0+56(%R0)" + : "=Q" (*fpregs) : "Q" (*fpregs)); if (!MACHINE_HAS_IEEE) return; asm volatile( - " stfpc 0(%1)\n" - " std 1,16(%1)\n" - " std 3,32(%1)\n" - " std 5,48(%1)\n" - " std 7,64(%1)\n" - " std 8,72(%1)\n" - " std 9,80(%1)\n" - " std 10,88(%1)\n" - " std 11,96(%1)\n" - " std 12,104(%1)\n" - " std 13,112(%1)\n" - " std 14,120(%1)\n" - " std 15,128(%1)\n" - : "=m" (*fpregs) : "a" (fpregs), "m" (*fpregs) : "memory"); + " stfpc %0\n" + " std 1,%O0+16(%R0)\n" + " std 3,%O0+32(%R0)\n" + " std 5,%O0+48(%R0)\n" + " std 7,%O0+64(%R0)\n" + " std 8,%O0+72(%R0)\n" + " std 9,%O0+80(%R0)\n" + " std 10,%O0+88(%R0)\n" + " std 11,%O0+96(%R0)\n" + " std 12,%O0+104(%R0)\n" + " std 13,%O0+112(%R0)\n" + " std 14,%O0+120(%R0)\n" + " std 15,%O0+128(%R0)\n" + : "=Q" (*fpregs) : "Q" (*fpregs)); } static inline void restore_fp_regs(s390_fp_regs *fpregs) { asm volatile( - " ld 0,8(%0)\n" - " ld 2,24(%0)\n" - " ld 4,40(%0)\n" - " ld 6,56(%0)" - : : "a" (fpregs), "m" (*fpregs)); + " ld 0,%O0+8(%R0)\n" + " ld 2,%O0+24(%R0)\n" + " ld 4,%O0+40(%R0)\n" + " ld 6,%O0+56(%R0)" + : : "Q" (*fpregs)); if (!MACHINE_HAS_IEEE) return; asm volatile( - " lfpc 0(%0)\n" - " ld 1,16(%0)\n" - " ld 3,32(%0)\n" - " ld 5,48(%0)\n" - " ld 7,64(%0)\n" - " ld 8,72(%0)\n" - " ld 9,80(%0)\n" - " ld 10,88(%0)\n" - " ld 11,96(%0)\n" - " ld 12,104(%0)\n" - " ld 13,112(%0)\n" - " ld 14,120(%0)\n" - " ld 15,128(%0)\n" - : : "a" (fpregs), "m" (*fpregs)); + " lfpc %0\n" + " ld 1,%O0+16(%R0)\n" + " ld 3,%O0+32(%R0)\n" + " ld 5,%O0+48(%R0)\n" + " ld 7,%O0+64(%R0)\n" + " ld 8,%O0+72(%R0)\n" + " ld 9,%O0+80(%R0)\n" + " ld 10,%O0+88(%R0)\n" + " ld 11,%O0+96(%R0)\n" + " ld 12,%O0+104(%R0)\n" + " ld 13,%O0+112(%R0)\n" + " ld 14,%O0+120(%R0)\n" + " ld 15,%O0+128(%R0)\n" + : : "Q" (*fpregs)); } static inline void save_access_regs(unsigned int *acrs) { - asm volatile("stam 0,15,0(%0)" : : "a" (acrs) : "memory"); + asm volatile("stam 0,15,%0" : "=Q" (*acrs)); } static inline void restore_access_regs(unsigned int *acrs) { - asm volatile("lam 0,15,0(%0)" : : "a" (acrs)); + asm volatile("lam 0,15,%0" : : "Q" (*acrs)); } #define switch_to(prev,next,last) do { \ @@ -139,48 +139,48 @@ static inline unsigned long __xchg(unsigned long x, void * ptr, int size) shift = (3 ^ (addr & 3)) << 3; addr ^= addr & 3; asm volatile( - " l %0,0(%4)\n" + " l %0,%4\n" "0: lr 0,%0\n" " nr 0,%3\n" " or 0,%2\n" - " cs %0,0,0(%4)\n" + " cs %0,0,%4\n" " jl 0b\n" - : "=&d" (old), "=m" (*(int *) addr) - : "d" (x << shift), "d" (~(255 << shift)), "a" (addr), - "m" (*(int *) addr) : "memory", "cc", "0"); + : "=&d" (old), "=Q" (*(int *) addr) + : "d" (x << shift), "d" (~(255 << shift)), + "Q" (*(int *) addr) : "memory", "cc", "0"); return old >> shift; case 2: addr = (unsigned long) ptr; shift = (2 ^ (addr & 2)) << 3; addr ^= addr & 2; asm volatile( - " l %0,0(%4)\n" + " l %0,%4\n" "0: lr 0,%0\n" " nr 0,%3\n" " or 0,%2\n" - " cs %0,0,0(%4)\n" + " cs %0,0,%4\n" " jl 0b\n" - : "=&d" (old), "=m" (*(int *) addr) - : "d" (x << shift), "d" (~(65535 << shift)), "a" (addr), - "m" (*(int *) addr) : "memory", "cc", "0"); + : "=&d" (old), "=Q" (*(int *) addr) + : "d" (x << shift), "d" (~(65535 << shift)), + "Q" (*(int *) addr) : "memory", "cc", "0"); return old >> shift; case 4: asm volatile( - " l %0,0(%3)\n" - "0: cs %0,%2,0(%3)\n" + " l %0,%3\n" + "0: cs %0,%2,%3\n" " jl 0b\n" - : "=&d" (old), "=m" (*(int *) ptr) - : "d" (x), "a" (ptr), "m" (*(int *) ptr) + : "=&d" (old), "=Q" (*(int *) ptr) + : "d" (x), "Q" (*(int *) ptr) : "memory", "cc"); return old; #ifdef __s390x__ case 8: asm volatile( - " lg %0,0(%3)\n" - "0: csg %0,%2,0(%3)\n" + " lg %0,%3\n" + "0: csg %0,%2,%3\n" " jl 0b\n" : "=&d" (old), "=m" (*(long *) ptr) - : "d" (x), "a" (ptr), "m" (*(long *) ptr) + : "d" (x), "Q" (*(long *) ptr) : "memory", "cc"); return old; #endif /* __s390x__ */ @@ -215,20 +215,20 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) shift = (3 ^ (addr & 3)) << 3; addr ^= addr & 3; asm volatile( - " l %0,0(%4)\n" + " l %0,%2\n" "0: nr %0,%5\n" " lr %1,%0\n" " or %0,%2\n" " or %1,%3\n" - " cs %0,%1,0(%4)\n" + " cs %0,%1,%2\n" " jnl 1f\n" " xr %1,%0\n" " nr %1,%5\n" " jnz 0b\n" "1:" - : "=&d" (prev), "=&d" (tmp) - : "d" (old << shift), "d" (new << shift), "a" (ptr), - "d" (~(255 << shift)) + : "=&d" (prev), "=&d" (tmp), "=Q" (*(int *) ptr) + : "d" (old << shift), "d" (new << shift), + "d" (~(255 << shift)), "Q" (*(int *) ptr) : "memory", "cc"); return prev >> shift; case 2: @@ -236,33 +236,35 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) shift = (2 ^ (addr & 2)) << 3; addr ^= addr & 2; asm volatile( - " l %0,0(%4)\n" + " l %0,%2\n" "0: nr %0,%5\n" " lr %1,%0\n" " or %0,%2\n" " or %1,%3\n" - " cs %0,%1,0(%4)\n" + " cs %0,%1,%2\n" " jnl 1f\n" " xr %1,%0\n" " nr %1,%5\n" " jnz 0b\n" "1:" - : "=&d" (prev), "=&d" (tmp) - : "d" (old << shift), "d" (new << shift), "a" (ptr), - "d" (~(65535 << shift)) + : "=&d" (prev), "=&d" (tmp), "=Q" (*(int *) ptr) + : "d" (old << shift), "d" (new << shift), + "d" (~(65535 << shift)), "Q" (*(int *) ptr) : "memory", "cc"); return prev >> shift; case 4: asm volatile( - " cs %0,%2,0(%3)\n" - : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) + " cs %0,%3,%1\n" + : "=&d" (prev), "=Q" (*(int *) ptr) + : "0" (old), "d" (new), "Q" (*(int *) ptr) : "memory", "cc"); return prev; #ifdef __s390x__ case 8: asm volatile( - " csg %0,%2,0(%3)\n" - : "=&d" (prev) : "0" (old), "d" (new), "a" (ptr) + " csg %0,%3,%1\n" + : "=&d" (prev), "=Q" (*(long *) ptr) + : "0" (old), "d" (new), "Q" (*(long *) ptr) : "memory", "cc"); return prev; #endif /* __s390x__ */ @@ -302,17 +304,17 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) #define __ctl_load(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ - " lctlg %1,%2,0(%0)\n" \ - : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(&array))); \ + " lctlg %1,%2,%0\n" \ + : : "Q" (*(addrtype *)(&array)), \ + "i" (low), "i" (high)); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ - " stctg %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(&array)) \ - : "a" (&array), "i" (low), "i" (high)); \ + " stctg %1,%2,%0\n" \ + : "=Q" (*(addrtype *)(&array)) \ + : "i" (low), "i" (high)); \ }) #else /* __s390x__ */ @@ -320,17 +322,17 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) #define __ctl_load(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ - " lctl %1,%2,0(%0)\n" \ - : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(&array))); \ + " lctl %1,%2,%0\n" \ + : : "Q" (*(addrtype *)(&array)), \ + "i" (low), "i" (high)); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ - " stctl %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(&array)) \ - : "a" (&array), "i" (low), "i" (high)); \ + " stctl %1,%2,%0\n" \ + : "=Q" (*(addrtype *)(&array)) \ + : "i" (low), "i" (high)); \ }) #endif /* __s390x__ */ diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h index 66069e73684..34f0873d652 100644 --- a/arch/s390/include/asm/thread_info.h +++ b/arch/s390/include/asm/thread_info.h @@ -73,7 +73,7 @@ struct thread_info { /* how to get the thread information struct from C */ static inline struct thread_info *current_thread_info(void) { - return (struct thread_info *)((*(unsigned long *) __LC_KERNEL_STACK)-THREAD_SIZE); + return (struct thread_info *)(S390_lowcore.kernel_stack - THREAD_SIZE); } #define THREAD_SIZE_ORDER THREAD_ORDER diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index 68d9fea34b4..f174bdaa6b5 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -20,10 +20,10 @@ static inline int set_clock(__u64 time) int cc; asm volatile( - " sck 0(%2)\n" + " sck %1\n" " ipm %0\n" " srl %0,28\n" - : "=d" (cc) : "m" (time), "a" (&time) : "cc"); + : "=d" (cc) : "Q" (time) : "cc"); return cc; } @@ -32,21 +32,21 @@ static inline int store_clock(__u64 *time) int cc; asm volatile( - " stck 0(%2)\n" + " stck %1\n" " ipm %0\n" " srl %0,28\n" - : "=d" (cc), "=m" (*time) : "a" (time) : "cc"); + : "=d" (cc), "=Q" (*time) : : "cc"); return cc; } static inline void set_clock_comparator(__u64 time) { - asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time)); + asm volatile("sckc %0" : : "Q" (time)); } static inline void store_clock_comparator(__u64 *time) { - asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time)); + asm volatile("stckc %0" : "=Q" (*time)); } #define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ @@ -57,11 +57,7 @@ static inline unsigned long long get_clock (void) { unsigned long long clk; -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) asm volatile("stck %0" : "=Q" (clk) : : "cc"); -#else /* __GNUC__ */ - asm volatile("stck 0(%1)" : "=m" (clk) : "a" (&clk) : "cc"); -#endif /* __GNUC__ */ return clk; } @@ -69,13 +65,7 @@ static inline unsigned long long get_clock_xt(void) { unsigned char clk[16]; -#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2) asm volatile("stcke %0" : "=Q" (clk) : : "cc"); -#else /* __GNUC__ */ - asm volatile("stcke 0(%1)" : "=m" (clk) - : "a" (clk) : "cc"); -#endif /* __GNUC__ */ - return *((unsigned long long *)&clk[1]); } diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index cbf0a8745bf..d6b1ed0ec52 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -265,6 +265,12 @@ __copy_from_user(void *to, const void __user *from, unsigned long n) return uaccess.copy_from_user(n, from, to); } +extern void copy_from_user_overflow(void) +#ifdef CONFIG_DEBUG_STRICT_USER_COPY_CHECKS +__compiletime_warning("copy_from_user() buffer size is not provably correct") +#endif +; + /** * copy_from_user: - Copy a block of data from user space. * @to: Destination address, in kernel space. @@ -284,7 +290,13 @@ __copy_from_user(void *to, const void __user *from, unsigned long n) static inline unsigned long __must_check copy_from_user(void *to, const void __user *from, unsigned long n) { + unsigned int sz = __compiletime_object_size(to); + might_fault(); + if (unlikely(sz != -1 && sz < n)) { + copy_from_user_overflow(); + return n; + } if (access_ok(VERIFY_READ, from, n)) n = __copy_from_user(to, from, n); else diff --git a/arch/s390/include/asm/vdso.h b/arch/s390/include/asm/vdso.h index 7bdd7c8ebc9..4a76d9480cc 100644 --- a/arch/s390/include/asm/vdso.h +++ b/arch/s390/include/asm/vdso.h @@ -7,7 +7,7 @@ #define VDSO32_LBASE 0 #define VDSO64_LBASE 0 -#define VDSO_VERSION_STRING LINUX_2.6.26 +#define VDSO_VERSION_STRING LINUX_2.6.29 #ifndef __ASSEMBLY__ diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 683f6381cc5..64230bc392f 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -29,9 +29,12 @@ obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) extra-y += head.o init_task.o vmlinux.lds +extra-y += $(if $(CONFIG_64BIT),head64.o,head31.o) obj-$(CONFIG_MODULES) += s390_ksyms.o module.o obj-$(CONFIG_SMP) += smp.o topology.o +obj-$(CONFIG_SMP) += $(if $(CONFIG_64BIT),switch_cpu64.o, \ + switch_cpu.o) obj-$(CONFIG_HIBERNATION) += suspend.o swsusp_asm64.o obj-$(CONFIG_AUDIT) += audit.o compat-obj-$(CONFIG_AUDIT) += compat_audit.o diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 63e46433e81..08db736dded 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -4,18 +4,27 @@ * and format the required data. */ -#include <linux/sched.h> +#define ASM_OFFSETS_C + #include <linux/kbuild.h> +#include <linux/sched.h> #include <asm/vdso.h> #include <asm/sigp.h> +/* + * Make sure that the compiler is new enough. We want a compiler that + * is known to work with the "Q" assembler constraint. + */ +#if __GNUC__ < 3 || (__GNUC__ == 3 && __GNUC_MINOR__ < 3) +#error Your compiler is too old; please use version 3.3.3 or newer +#endif + int main(void) { DEFINE(__THREAD_info, offsetof(struct task_struct, stack)); DEFINE(__THREAD_ksp, offsetof(struct task_struct, thread.ksp)); DEFINE(__THREAD_per, offsetof(struct task_struct, thread.per_info)); - DEFINE(__THREAD_mm_segment, - offsetof(struct task_struct, thread.mm_segment)); + DEFINE(__THREAD_mm_segment, offsetof(struct task_struct, thread.mm_segment)); BLANK(); DEFINE(__TASK_pid, offsetof(struct task_struct, pid)); BLANK(); @@ -52,18 +61,94 @@ int main(void) DEFINE(__VDSO_WTOM_NSEC, offsetof(struct vdso_data, wtom_clock_nsec)); DEFINE(__VDSO_TIMEZONE, offsetof(struct vdso_data, tz_minuteswest)); DEFINE(__VDSO_ECTG_OK, offsetof(struct vdso_data, ectg_available)); - DEFINE(__VDSO_ECTG_BASE, - offsetof(struct vdso_per_cpu_data, ectg_timer_base)); - DEFINE(__VDSO_ECTG_USER, - offsetof(struct vdso_per_cpu_data, ectg_user_time)); + DEFINE(__VDSO_ECTG_BASE, offsetof(struct vdso_per_cpu_data, ectg_timer_base)); + DEFINE(__VDSO_ECTG_USER, offsetof(struct vdso_per_cpu_data, ectg_user_time)); /* constants used by the vdso */ DEFINE(CLOCK_REALTIME, CLOCK_REALTIME); DEFINE(CLOCK_MONOTONIC, CLOCK_MONOTONIC); DEFINE(CLOCK_REALTIME_RES, MONOTONIC_RES_NSEC); + BLANK(); /* constants for SIGP */ DEFINE(__SIGP_STOP, sigp_stop); DEFINE(__SIGP_RESTART, sigp_restart); DEFINE(__SIGP_SENSE, sigp_sense); DEFINE(__SIGP_INITIAL_CPU_RESET, sigp_initial_cpu_reset); + BLANK(); + /* lowcore offsets */ + DEFINE(__LC_EXT_PARAMS, offsetof(struct _lowcore, ext_params)); + DEFINE(__LC_CPU_ADDRESS, offsetof(struct _lowcore, cpu_addr)); + DEFINE(__LC_EXT_INT_CODE, offsetof(struct _lowcore, ext_int_code)); + DEFINE(__LC_SVC_ILC, offsetof(struct _lowcore, svc_ilc)); + DEFINE(__LC_SVC_INT_CODE, offsetof(struct _lowcore, svc_code)); + DEFINE(__LC_PGM_ILC, offsetof(struct _lowcore, pgm_ilc)); + DEFINE(__LC_PGM_INT_CODE, offsetof(struct _lowcore, pgm_code)); + DEFINE(__LC_PER_ATMID, offsetof(struct _lowcore, per_perc_atmid)); + DEFINE(__LC_PER_ADDRESS, offsetof(struct _lowcore, per_address)); + DEFINE(__LC_PER_ACCESS_ID, offsetof(struct _lowcore, per_access_id)); + DEFINE(__LC_AR_MODE_ID, offsetof(struct _lowcore, ar_access_id)); + DEFINE(__LC_SUBCHANNEL_ID, offsetof(struct _lowcore, subchannel_id)); + DEFINE(__LC_SUBCHANNEL_NR, offsetof(struct _lowcore, subchannel_nr)); + DEFINE(__LC_IO_INT_PARM, offsetof(struct _lowcore, io_int_parm)); + DEFINE(__LC_IO_INT_WORD, offsetof(struct _lowcore, io_int_word)); + DEFINE(__LC_STFL_FAC_LIST, offsetof(struct _lowcore, stfl_fac_list)); + DEFINE(__LC_MCCK_CODE, offsetof(struct _lowcore, mcck_interruption_code)); + DEFINE(__LC_DUMP_REIPL, offsetof(struct _lowcore, ipib)); + BLANK(); + DEFINE(__LC_RST_NEW_PSW, offsetof(struct _lowcore, restart_psw)); + DEFINE(__LC_RST_OLD_PSW, offsetof(struct _lowcore, restart_old_psw)); + DEFINE(__LC_EXT_OLD_PSW, offsetof(struct _lowcore, external_old_psw)); + DEFINE(__LC_SVC_OLD_PSW, offsetof(struct _lowcore, svc_old_psw)); + DEFINE(__LC_PGM_OLD_PSW, offsetof(struct _lowcore, program_old_psw)); + DEFINE(__LC_MCK_OLD_PSW, offsetof(struct _lowcore, mcck_old_psw)); + DEFINE(__LC_IO_OLD_PSW, offsetof(struct _lowcore, io_old_psw)); + DEFINE(__LC_EXT_NEW_PSW, offsetof(struct _lowcore, external_new_psw)); + DEFINE(__LC_SVC_NEW_PSW, offsetof(struct _lowcore, svc_new_psw)); + DEFINE(__LC_PGM_NEW_PSW, offsetof(struct _lowcore, program_new_psw)); + DEFINE(__LC_MCK_NEW_PSW, offsetof(struct _lowcore, mcck_new_psw)); + DEFINE(__LC_IO_NEW_PSW, offsetof(struct _lowcore, io_new_psw)); + DEFINE(__LC_SAVE_AREA, offsetof(struct _lowcore, save_area)); + DEFINE(__LC_RETURN_PSW, offsetof(struct _lowcore, return_psw)); + DEFINE(__LC_RETURN_MCCK_PSW, offsetof(struct _lowcore, return_mcck_psw)); + DEFINE(__LC_SYNC_ENTER_TIMER, offsetof(struct _lowcore, sync_enter_timer)); + DEFINE(__LC_ASYNC_ENTER_TIMER, offsetof(struct _lowcore, async_enter_timer)); + DEFINE(__LC_EXIT_TIMER, offsetof(struct _lowcore, exit_timer)); + DEFINE(__LC_USER_TIMER, offsetof(struct _lowcore, user_timer)); + DEFINE(__LC_SYSTEM_TIMER, offsetof(struct _lowcore, system_timer)); + DEFINE(__LC_STEAL_TIMER, offsetof(struct _lowcore, steal_timer)); + DEFINE(__LC_LAST_UPDATE_TIMER, offsetof(struct _lowcore, last_update_timer)); + DEFINE(__LC_LAST_UPDATE_CLOCK, offsetof(struct _lowcore, last_update_clock)); + DEFINE(__LC_CURRENT, offsetof(struct _lowcore, current_task)); + DEFINE(__LC_THREAD_INFO, offsetof(struct _lowcore, thread_info)); + DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); + DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); + DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); + DEFINE(__LC_KERNEL_ASCE, offsetof(struct _lowcore, kernel_asce)); + DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); + DEFINE(__LC_USER_EXEC_ASCE, offsetof(struct _lowcore, user_exec_asce)); + DEFINE(__LC_CPUID, offsetof(struct _lowcore, cpu_id)); + DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); + DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); + DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func)); + DEFINE(__LC_IRB, offsetof(struct _lowcore, irb)); + DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area)); + DEFINE(__LC_CLOCK_COMP_SAVE_AREA, offsetof(struct _lowcore, clock_comp_save_area)); + DEFINE(__LC_PSW_SAVE_AREA, offsetof(struct _lowcore, psw_save_area)); + DEFINE(__LC_PREFIX_SAVE_AREA, offsetof(struct _lowcore, prefixreg_save_area)); + DEFINE(__LC_AREGS_SAVE_AREA, offsetof(struct _lowcore, access_regs_save_area)); + DEFINE(__LC_FPREGS_SAVE_AREA, offsetof(struct _lowcore, floating_pt_save_area)); + DEFINE(__LC_GPREGS_SAVE_AREA, offsetof(struct _lowcore, gpregs_save_area)); + DEFINE(__LC_CREGS_SAVE_AREA, offsetof(struct _lowcore, cregs_save_area)); +#ifdef CONFIG_32BIT + DEFINE(__LC_PFAULT_INTPARM, offsetof(struct _lowcore, ext_params)); + DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, extended_save_area_addr)); +#else /* CONFIG_32BIT */ + DEFINE(__LC_PFAULT_INTPARM, offsetof(struct _lowcore, ext_params2)); + DEFINE(__LC_EXT_PARAMS2, offsetof(struct _lowcore, ext_params2)); + DEFINE(SAVE_AREA_BASE, offsetof(struct _lowcore, floating_pt_save_area)); + DEFINE(__LC_PASTE, offsetof(struct _lowcore, paste)); + DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area)); + DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr)); + DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); +#endif /* CONFIG_32BIT */ return 0; } diff --git a/arch/s390/kernel/base.S b/arch/s390/kernel/base.S index dc7e5259770..15e46ca9433 100644 --- a/arch/s390/kernel/base.S +++ b/arch/s390/kernel/base.S @@ -6,8 +6,8 @@ * Michael Holzheu <holzheu@de.ibm.com> */ +#include <asm/asm-offsets.h> #include <asm/ptrace.h> -#include <asm/lowcore.h> #ifdef CONFIG_64BIT diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index db943a7ec51..b39b27d68b4 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -86,10 +86,17 @@ enum { U4_12, /* 4 bit unsigned value starting at 12 */ U4_16, /* 4 bit unsigned value starting at 16 */ U4_20, /* 4 bit unsigned value starting at 20 */ + U4_32, /* 4 bit unsigned value starting at 32 */ U8_8, /* 8 bit unsigned value starting at 8 */ U8_16, /* 8 bit unsigned value starting at 16 */ + U8_24, /* 8 bit unsigned value starting at 24 */ + U8_32, /* 8 bit unsigned value starting at 32 */ + I8_8, /* 8 bit signed value starting at 8 */ + I8_32, /* 8 bit signed value starting at 32 */ I16_16, /* 16 bit signed value starting at 16 */ + I16_32, /* 32 bit signed value starting at 16 */ U16_16, /* 16 bit unsigned value starting at 16 */ + U16_32, /* 32 bit unsigned value starting at 16 */ J16_16, /* PC relative jump offset at 16 */ J32_16, /* PC relative long offset at 16 */ I32_16, /* 32 bit signed value starting at 16 */ @@ -104,21 +111,37 @@ enum { */ enum { INSTR_INVALID, - INSTR_E, INSTR_RIE_RRP, INSTR_RIL_RI, INSTR_RIL_RP, INSTR_RIL_RU, - INSTR_RIL_UP, INSTR_RI_RI, INSTR_RI_RP, INSTR_RI_RU, INSTR_RI_UP, + INSTR_E, + INSTR_RIE_R0IU, INSTR_RIE_R0UU, INSTR_RIE_RRP, INSTR_RIE_RRPU, + INSTR_RIE_RRUUU, INSTR_RIE_RUPI, INSTR_RIE_RUPU, + INSTR_RIL_RI, INSTR_RIL_RP, INSTR_RIL_RU, INSTR_RIL_UP, + INSTR_RIS_R0RDU, INSTR_RIS_R0UU, INSTR_RIS_RURDI, INSTR_RIS_RURDU, + INSTR_RI_RI, INSTR_RI_RP, INSTR_RI_RU, INSTR_RI_UP, INSTR_RRE_00, INSTR_RRE_0R, INSTR_RRE_AA, INSTR_RRE_AR, INSTR_RRE_F0, - INSTR_RRE_FF, INSTR_RRE_R0, INSTR_RRE_RA, INSTR_RRE_RF, INSTR_RRE_RR, - INSTR_RRE_RR_OPT, INSTR_RRF_F0FF, INSTR_RRF_FUFF, INSTR_RRF_M0RR, - INSTR_RRF_R0RR, INSTR_RRF_RURR, INSTR_RRF_U0FF, INSTR_RRF_U0RF, + INSTR_RRE_FF, INSTR_RRE_FR, INSTR_RRE_R0, INSTR_RRE_RA, INSTR_RRE_RF, + INSTR_RRE_RR, INSTR_RRE_RR_OPT, + INSTR_RRF_0UFF, INSTR_RRF_F0FF, INSTR_RRF_F0FF2, INSTR_RRF_F0FR, + INSTR_RRF_FFRU, INSTR_RRF_FUFF, INSTR_RRF_M0RR, INSTR_RRF_R0RR, + INSTR_RRF_RURR, INSTR_RRF_U0FF, INSTR_RRF_U0RF, INSTR_RRF_U0RR, + INSTR_RRF_UUFF, INSTR_RRR_F0FF, INSTR_RRS_RRRDU, INSTR_RR_FF, INSTR_RR_R0, INSTR_RR_RR, INSTR_RR_U0, INSTR_RR_UR, - INSTR_RSE_CCRD, INSTR_RSE_RRRD, INSTR_RSE_RURD, INSTR_RSI_RRP, - INSTR_RSL_R0RD, INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD, - INSTR_RSY_RURD, INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD, - INSTR_RS_RRRD, INSTR_RS_RURD, INSTR_RXE_FRRD, INSTR_RXE_RRRD, - INSTR_RXF_FRRDF, INSTR_RXY_FRRD, INSTR_RXY_RRRD, INSTR_RX_FRRD, - INSTR_RX_RRRD, INSTR_RX_URRD, INSTR_SIY_URD, INSTR_SI_URD, - INSTR_SSE_RDRD, INSTR_SSF_RRDRD, INSTR_SS_L0RDRD, INSTR_SS_LIRDRD, - INSTR_SS_LLRDRD, INSTR_SS_RRRDRD, INSTR_SS_RRRDRD2, INSTR_SS_RRRDRD3, + INSTR_RSE_CCRD, INSTR_RSE_RRRD, INSTR_RSE_RURD, + INSTR_RSI_RRP, + INSTR_RSL_R0RD, + INSTR_RSY_AARD, INSTR_RSY_CCRD, INSTR_RSY_RRRD, INSTR_RSY_RURD, + INSTR_RS_AARD, INSTR_RS_CCRD, INSTR_RS_R0RD, INSTR_RS_RRRD, + INSTR_RS_RURD, + INSTR_RXE_FRRD, INSTR_RXE_RRRD, + INSTR_RXF_FRRDF, + INSTR_RXY_FRRD, INSTR_RXY_RRRD, INSTR_RXY_URRD, + INSTR_RX_FRRD, INSTR_RX_RRRD, INSTR_RX_URRD, + INSTR_SIL_RDI, INSTR_SIL_RDU, + INSTR_SIY_IRD, INSTR_SIY_URD, + INSTR_SI_URD, + INSTR_SSE_RDRD, + INSTR_SSF_RRDRD, + INSTR_SS_L0RDRD, INSTR_SS_LIRDRD, INSTR_SS_LLRDRD, INSTR_SS_RRRDRD, + INSTR_SS_RRRDRD2, INSTR_SS_RRRDRD3, INSTR_S_00, INSTR_S_RD, }; @@ -129,7 +152,7 @@ struct operand { }; struct insn { - const char name[5]; + const char name[6]; unsigned char opfrag; unsigned char format; }; @@ -170,11 +193,16 @@ static const struct operand operands[] = [U4_12] = { 4, 12, 0 }, [U4_16] = { 4, 16, 0 }, [U4_20] = { 4, 20, 0 }, + [U4_32] = { 4, 32, 0 }, [U8_8] = { 8, 8, 0 }, [U8_16] = { 8, 16, 0 }, + [U8_24] = { 8, 24, 0 }, + [U8_32] = { 8, 32, 0 }, [I16_16] = { 16, 16, OPERAND_SIGNED }, [U16_16] = { 16, 16, 0 }, + [U16_32] = { 16, 32, 0 }, [J16_16] = { 16, 16, OPERAND_PCREL }, + [I16_32] = { 16, 32, OPERAND_SIGNED }, [J32_16] = { 32, 16, OPERAND_PCREL }, [I32_16] = { 32, 16, OPERAND_SIGNED }, [U32_16] = { 32, 16, 0 }, @@ -183,82 +211,93 @@ static const struct operand operands[] = }; static const unsigned char formats[][7] = { - [INSTR_E] = { 0xff, 0,0,0,0,0,0 }, /* e.g. pr */ - [INSTR_RIE_RRP] = { 0xff, R_8,R_12,J16_16,0,0,0 }, /* e.g. brxhg */ - [INSTR_RIL_RP] = { 0x0f, R_8,J32_16,0,0,0,0 }, /* e.g. brasl */ - [INSTR_RIL_UP] = { 0x0f, U4_8,J32_16,0,0,0,0 }, /* e.g. brcl */ - [INSTR_RIL_RI] = { 0x0f, R_8,I32_16,0,0,0,0 }, /* e.g. afi */ - [INSTR_RIL_RU] = { 0x0f, R_8,U32_16,0,0,0,0 }, /* e.g. alfi */ - [INSTR_RI_RI] = { 0x0f, R_8,I16_16,0,0,0,0 }, /* e.g. ahi */ - [INSTR_RI_RP] = { 0x0f, R_8,J16_16,0,0,0,0 }, /* e.g. brct */ - [INSTR_RI_RU] = { 0x0f, R_8,U16_16,0,0,0,0 }, /* e.g. tml */ - [INSTR_RI_UP] = { 0x0f, U4_8,J16_16,0,0,0,0 }, /* e.g. brc */ - [INSTR_RRE_00] = { 0xff, 0,0,0,0,0,0 }, /* e.g. palb */ - [INSTR_RRE_0R] = { 0xff, R_28,0,0,0,0,0 }, /* e.g. tb */ - [INSTR_RRE_AA] = { 0xff, A_24,A_28,0,0,0,0 }, /* e.g. cpya */ - [INSTR_RRE_AR] = { 0xff, A_24,R_28,0,0,0,0 }, /* e.g. sar */ - [INSTR_RRE_F0] = { 0xff, F_24,0,0,0,0,0 }, /* e.g. sqer */ - [INSTR_RRE_FF] = { 0xff, F_24,F_28,0,0,0,0 }, /* e.g. debr */ - [INSTR_RRE_R0] = { 0xff, R_24,0,0,0,0,0 }, /* e.g. ipm */ - [INSTR_RRE_RA] = { 0xff, R_24,A_28,0,0,0,0 }, /* e.g. ear */ - [INSTR_RRE_RF] = { 0xff, R_24,F_28,0,0,0,0 }, /* e.g. cefbr */ - [INSTR_RRE_RR] = { 0xff, R_24,R_28,0,0,0,0 }, /* e.g. lura */ - [INSTR_RRE_RR_OPT]= { 0xff, R_24,RO_28,0,0,0,0 }, /* efpc, sfpc */ - [INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, /* e.g. madbr */ - [INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */ - [INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */ - [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, /* e.g. idte */ - [INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, /* e.g. fixr */ - [INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, /* e.g. cfebr */ - [INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, /* e.g. sske */ - [INSTR_RR_FF] = { 0xff, F_8,F_12,0,0,0,0 }, /* e.g. adr */ - [INSTR_RR_R0] = { 0xff, R_8, 0,0,0,0,0 }, /* e.g. spm */ - [INSTR_RR_RR] = { 0xff, R_8,R_12,0,0,0,0 }, /* e.g. lr */ - [INSTR_RR_U0] = { 0xff, U8_8, 0,0,0,0,0 }, /* e.g. svc */ - [INSTR_RR_UR] = { 0xff, U4_8,R_12,0,0,0,0 }, /* e.g. bcr */ - [INSTR_RSE_RRRD] = { 0xff, R_8,R_12,D_20,B_16,0,0 }, /* e.g. lmh */ - [INSTR_RSE_CCRD] = { 0xff, C_8,C_12,D_20,B_16,0,0 }, /* e.g. lmh */ - [INSTR_RSE_RURD] = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icmh */ - [INSTR_RSL_R0RD] = { 0xff, R_8,D_20,B_16,0,0,0 }, /* e.g. tp */ - [INSTR_RSI_RRP] = { 0xff, R_8,R_12,J16_16,0,0,0 }, /* e.g. brxh */ - [INSTR_RSY_RRRD] = { 0xff, R_8,R_12,D20_20,B_16,0,0 },/* e.g. stmy */ + [INSTR_E] = { 0xff, 0,0,0,0,0,0 }, + [INSTR_RIE_R0UU] = { 0xff, R_8,U16_16,U4_32,0,0,0 }, + [INSTR_RIE_RRPU] = { 0xff, R_8,R_12,U4_32,J16_16,0,0 }, + [INSTR_RIE_RRP] = { 0xff, R_8,R_12,J16_16,0,0,0 }, + [INSTR_RIE_RRUUU] = { 0xff, R_8,R_12,U8_16,U8_24,U8_32,0 }, + [INSTR_RIE_RUPI] = { 0xff, R_8,I8_32,U4_12,J16_16,0,0 }, + [INSTR_RIL_RI] = { 0x0f, R_8,I32_16,0,0,0,0 }, + [INSTR_RIL_RP] = { 0x0f, R_8,J32_16,0,0,0,0 }, + [INSTR_RIL_RU] = { 0x0f, R_8,U32_16,0,0,0,0 }, + [INSTR_RIL_UP] = { 0x0f, U4_8,J32_16,0,0,0,0 }, + [INSTR_RIS_R0RDU] = { 0xff, R_8,U8_32,D_20,B_16,0,0 }, + [INSTR_RIS_RURDI] = { 0xff, R_8,I8_32,U4_12,D_20,B_16,0 }, + [INSTR_RIS_RURDU] = { 0xff, R_8,U8_32,U4_12,D_20,B_16,0 }, + [INSTR_RI_RI] = { 0x0f, R_8,I16_16,0,0,0,0 }, + [INSTR_RI_RP] = { 0x0f, R_8,J16_16,0,0,0,0 }, + [INSTR_RI_RU] = { 0x0f, R_8,U16_16,0,0,0,0 }, + [INSTR_RI_UP] = { 0x0f, U4_8,J16_16,0,0,0,0 }, + [INSTR_RRE_00] = { 0xff, 0,0,0,0,0,0 }, + [INSTR_RRE_0R] = { 0xff, R_28,0,0,0,0,0 }, + [INSTR_RRE_AA] = { 0xff, A_24,A_28,0,0,0,0 }, + [INSTR_RRE_AR] = { 0xff, A_24,R_28,0,0,0,0 }, + [INSTR_RRE_F0] = { 0xff, F_24,0,0,0,0,0 }, + [INSTR_RRE_FF] = { 0xff, F_24,F_28,0,0,0,0 }, + [INSTR_RRE_FR] = { 0xff, F_24,R_28,0,0,0,0 }, + [INSTR_RRE_R0] = { 0xff, R_24,0,0,0,0,0 }, + [INSTR_RRE_RA] = { 0xff, R_24,A_28,0,0,0,0 }, + [INSTR_RRE_RF] = { 0xff, R_24,F_28,0,0,0,0 }, + [INSTR_RRE_RR] = { 0xff, R_24,R_28,0,0,0,0 }, + [INSTR_RRE_RR_OPT]= { 0xff, R_24,RO_28,0,0,0,0 }, + [INSTR_RRF_0UFF] = { 0xff, F_24,F_28,U4_20,0,0,0 }, + [INSTR_RRF_F0FF2] = { 0xff, F_24,F_16,F_28,0,0,0 }, + [INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, + [INSTR_RRF_F0FR] = { 0xff, F_24,F_16,R_28,0,0,0 }, + [INSTR_RRF_FFRU] = { 0xff, F_24,F_16,R_28,U4_20,0,0 }, + [INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 }, + [INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, + [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, + [INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 }, + [INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, + [INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, + [INSTR_RRF_U0RR] = { 0xff, R_24,R_28,U4_16,0,0,0 }, + [INSTR_RRF_UUFF] = { 0xff, F_24,U4_16,F_28,U4_20,0,0 }, + [INSTR_RRR_F0FF] = { 0xff, F_24,F_28,F_16,0,0,0 }, + [INSTR_RRS_RRRDU] = { 0xff, R_8,R_12,U4_32,D_20,B_16,0 }, + [INSTR_RR_FF] = { 0xff, F_8,F_12,0,0,0,0 }, + [INSTR_RR_R0] = { 0xff, R_8, 0,0,0,0,0 }, + [INSTR_RR_RR] = { 0xff, R_8,R_12,0,0,0,0 }, + [INSTR_RR_U0] = { 0xff, U8_8, 0,0,0,0,0 }, + [INSTR_RR_UR] = { 0xff, U4_8,R_12,0,0,0,0 }, + [INSTR_RSE_CCRD] = { 0xff, C_8,C_12,D_20,B_16,0,0 }, + [INSTR_RSE_RRRD] = { 0xff, R_8,R_12,D_20,B_16,0,0 }, + [INSTR_RSE_RURD] = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, + [INSTR_RSI_RRP] = { 0xff, R_8,R_12,J16_16,0,0,0 }, + [INSTR_RSL_R0RD] = { 0xff, D_20,L4_8,B_16,0,0,0 }, + [INSTR_RSY_AARD] = { 0xff, A_8,A_12,D20_20,B_16,0,0 }, + [INSTR_RSY_CCRD] = { 0xff, C_8,C_12,D20_20,B_16,0,0 }, + [INSTR_RSY_RRRD] = { 0xff, R_8,R_12,D20_20,B_16,0,0 }, [INSTR_RSY_RURD] = { 0xff, R_8,U4_12,D20_20,B_16,0,0 }, - /* e.g. icmh */ - [INSTR_RSY_AARD] = { 0xff, A_8,A_12,D20_20,B_16,0,0 },/* e.g. lamy */ - [INSTR_RSY_CCRD] = { 0xff, C_8,C_12,D20_20,B_16,0,0 },/* e.g. lamy */ - [INSTR_RS_AARD] = { 0xff, A_8,A_12,D_20,B_16,0,0 }, /* e.g. lam */ - [INSTR_RS_CCRD] = { 0xff, C_8,C_12,D_20,B_16,0,0 }, /* e.g. lctl */ - [INSTR_RS_R0RD] = { 0xff, R_8,D_20,B_16,0,0,0 }, /* e.g. sll */ - [INSTR_RS_RRRD] = { 0xff, R_8,R_12,D_20,B_16,0,0 }, /* e.g. cs */ - [INSTR_RS_RURD] = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, /* e.g. icm */ - [INSTR_RXE_FRRD] = { 0xff, F_8,D_20,X_12,B_16,0,0 }, /* e.g. axbr */ - [INSTR_RXE_RRRD] = { 0xff, R_8,D_20,X_12,B_16,0,0 }, /* e.g. lg */ + [INSTR_RS_AARD] = { 0xff, A_8,A_12,D_20,B_16,0,0 }, + [INSTR_RS_CCRD] = { 0xff, C_8,C_12,D_20,B_16,0,0 }, + [INSTR_RS_R0RD] = { 0xff, R_8,D_20,B_16,0,0,0 }, + [INSTR_RS_RRRD] = { 0xff, R_8,R_12,D_20,B_16,0,0 }, + [INSTR_RS_RURD] = { 0xff, R_8,U4_12,D_20,B_16,0,0 }, + [INSTR_RXE_FRRD] = { 0xff, F_8,D_20,X_12,B_16,0,0 }, + [INSTR_RXE_RRRD] = { 0xff, R_8,D_20,X_12,B_16,0,0 }, [INSTR_RXF_FRRDF] = { 0xff, F_32,F_8,D_20,X_12,B_16,0 }, - /* e.g. madb */ - [INSTR_RXY_RRRD] = { 0xff, R_8,D20_20,X_12,B_16,0,0 },/* e.g. ly */ - [INSTR_RXY_FRRD] = { 0xff, F_8,D20_20,X_12,B_16,0,0 },/* e.g. ley */ - [INSTR_RX_FRRD] = { 0xff, F_8,D_20,X_12,B_16,0,0 }, /* e.g. ae */ - [INSTR_RX_RRRD] = { 0xff, R_8,D_20,X_12,B_16,0,0 }, /* e.g. l */ - [INSTR_RX_URRD] = { 0xff, U4_8,D_20,X_12,B_16,0,0 }, /* e.g. bc */ - [INSTR_SI_URD] = { 0xff, D_20,B_16,U8_8,0,0,0 }, /* e.g. cli */ - [INSTR_SIY_URD] = { 0xff, D20_20,B_16,U8_8,0,0,0 }, /* e.g. tmy */ - [INSTR_SSE_RDRD] = { 0xff, D_20,B_16,D_36,B_32,0,0 }, /* e.g. mvsdk */ + [INSTR_RXY_FRRD] = { 0xff, F_8,D20_20,X_12,B_16,0,0 }, + [INSTR_RXY_RRRD] = { 0xff, R_8,D20_20,X_12,B_16,0,0 }, + [INSTR_RXY_URRD] = { 0xff, U4_8,D20_20,X_12,B_16,0,0 }, + [INSTR_RX_FRRD] = { 0xff, F_8,D_20,X_12,B_16,0,0 }, + [INSTR_RX_RRRD] = { 0xff, R_8,D_20,X_12,B_16,0,0 }, + [INSTR_RX_URRD] = { 0xff, U4_8,D_20,X_12,B_16,0,0 }, + [INSTR_SIL_RDI] = { 0xff, D_20,B_16,I16_32,0,0,0 }, + [INSTR_SIL_RDU] = { 0xff, D_20,B_16,U16_32,0,0,0 }, + [INSTR_SIY_IRD] = { 0xff, D20_20,B_16,I8_8,0,0,0 }, + [INSTR_SIY_URD] = { 0xff, D20_20,B_16,U8_8,0,0,0 }, + [INSTR_SI_URD] = { 0xff, D_20,B_16,U8_8,0,0,0 }, + [INSTR_SSE_RDRD] = { 0xff, D_20,B_16,D_36,B_32,0,0 }, + [INSTR_SSF_RRDRD] = { 0x00, D_20,B_16,D_36,B_32,R_8,0 }, [INSTR_SS_L0RDRD] = { 0xff, D_20,L8_8,B_16,D_36,B_32,0 }, - /* e.g. mvc */ [INSTR_SS_LIRDRD] = { 0xff, D_20,L4_8,B_16,D_36,B_32,U4_12 }, - /* e.g. srp */ [INSTR_SS_LLRDRD] = { 0xff, D_20,L4_8,B_16,D_36,L4_12,B_32 }, - /* e.g. pack */ - [INSTR_SS_RRRDRD] = { 0xff, D_20,R_8,B_16,D_36,B_32,R_12 }, - /* e.g. mvck */ [INSTR_SS_RRRDRD2]= { 0xff, R_8,D_20,B_16,R_12,D_36,B_32 }, - /* e.g. plo */ [INSTR_SS_RRRDRD3]= { 0xff, R_8,R_12,D_20,B_16,D_36,B_32 }, - /* e.g. lmd */ - [INSTR_S_00] = { 0xff, 0,0,0,0,0,0 }, /* e.g. hsch */ - [INSTR_S_RD] = { 0xff, D_20,B_16,0,0,0,0 }, /* e.g. lpsw */ - [INSTR_SSF_RRDRD] = { 0x00, D_20,B_16,D_36,B_32,R_8,0 }, - /* e.g. mvcos */ + [INSTR_SS_RRRDRD] = { 0xff, D_20,R_8,B_16,D_36,B_32,R_12 }, + [INSTR_S_00] = { 0xff, 0,0,0,0,0,0 }, + [INSTR_S_RD] = { 0xff, D_20,B_16,0,0,0,0 }, }; static struct insn opcode[] = { @@ -454,6 +493,8 @@ static struct insn opcode[] = { static struct insn opcode_01[] = { #ifdef CONFIG_64BIT { "sam64", 0x0e, INSTR_E }, + { "pfpo", 0x0a, INSTR_E }, + { "ptff", 0x04, INSTR_E }, #endif { "pr", 0x01, INSTR_E }, { "upt", 0x02, INSTR_E }, @@ -519,6 +560,8 @@ static struct insn opcode_b2[] = { { "cutfu", 0xa7, INSTR_RRF_M0RR }, { "stfle", 0xb0, INSTR_S_RD }, { "lpswe", 0xb2, INSTR_S_RD }, + { "srnmt", 0xb9, INSTR_S_RD }, + { "lfas", 0xbd, INSTR_S_RD }, #endif { "stidp", 0x02, INSTR_S_RD }, { "sck", 0x04, INSTR_S_RD }, @@ -589,7 +632,6 @@ static struct insn opcode_b2[] = { { "clst", 0x5d, INSTR_RRE_RR }, { "srst", 0x5e, INSTR_RRE_RR }, { "cmpsc", 0x63, INSTR_RRE_RR }, - { "cmpsc", 0x63, INSTR_RRE_RR }, { "siga", 0x74, INSTR_S_RD }, { "xsch", 0x76, INSTR_S_00 }, { "rp", 0x77, INSTR_S_RD }, @@ -630,6 +672,57 @@ static struct insn opcode_b3[] = { { "cger", 0xc8, INSTR_RRF_U0RF }, { "cgdr", 0xc9, INSTR_RRF_U0RF }, { "cgxr", 0xca, INSTR_RRF_U0RF }, + { "lpdfr", 0x70, INSTR_RRE_FF }, + { "lndfr", 0x71, INSTR_RRE_FF }, + { "cpsdr", 0x72, INSTR_RRF_F0FF2 }, + { "lcdfr", 0x73, INSTR_RRE_FF }, + { "ldgr", 0xc1, INSTR_RRE_FR }, + { "lgdr", 0xcd, INSTR_RRE_RF }, + { "adtr", 0xd2, INSTR_RRR_F0FF }, + { "axtr", 0xda, INSTR_RRR_F0FF }, + { "cdtr", 0xe4, INSTR_RRE_FF }, + { "cxtr", 0xec, INSTR_RRE_FF }, + { "kdtr", 0xe0, INSTR_RRE_FF }, + { "kxtr", 0xe8, INSTR_RRE_FF }, + { "cedtr", 0xf4, INSTR_RRE_FF }, + { "cextr", 0xfc, INSTR_RRE_FF }, + { "cdgtr", 0xf1, INSTR_RRE_FR }, + { "cxgtr", 0xf9, INSTR_RRE_FR }, + { "cdstr", 0xf3, INSTR_RRE_FR }, + { "cxstr", 0xfb, INSTR_RRE_FR }, + { "cdutr", 0xf2, INSTR_RRE_FR }, + { "cxutr", 0xfa, INSTR_RRE_FR }, + { "cgdtr", 0xe1, INSTR_RRF_U0RF }, + { "cgxtr", 0xe9, INSTR_RRF_U0RF }, + { "csdtr", 0xe3, INSTR_RRE_RF }, + { "csxtr", 0xeb, INSTR_RRE_RF }, + { "cudtr", 0xe2, INSTR_RRE_RF }, + { "cuxtr", 0xea, INSTR_RRE_RF }, + { "ddtr", 0xd1, INSTR_RRR_F0FF }, + { "dxtr", 0xd9, INSTR_RRR_F0FF }, + { "eedtr", 0xe5, INSTR_RRE_RF }, + { "eextr", 0xed, INSTR_RRE_RF }, + { "esdtr", 0xe7, INSTR_RRE_RF }, + { "esxtr", 0xef, INSTR_RRE_RF }, + { "iedtr", 0xf6, INSTR_RRF_F0FR }, + { "iextr", 0xfe, INSTR_RRF_F0FR }, + { "ltdtr", 0xd6, INSTR_RRE_FF }, + { "ltxtr", 0xde, INSTR_RRE_FF }, + { "fidtr", 0xd7, INSTR_RRF_UUFF }, + { "fixtr", 0xdf, INSTR_RRF_UUFF }, + { "ldetr", 0xd4, INSTR_RRF_0UFF }, + { "lxdtr", 0xdc, INSTR_RRF_0UFF }, + { "ledtr", 0xd5, INSTR_RRF_UUFF }, + { "ldxtr", 0xdd, INSTR_RRF_UUFF }, + { "mdtr", 0xd0, INSTR_RRR_F0FF }, + { "mxtr", 0xd8, INSTR_RRR_F0FF }, + { "qadtr", 0xf5, INSTR_RRF_FUFF }, + { "qaxtr", 0xfd, INSTR_RRF_FUFF }, + { "rrdtr", 0xf7, INSTR_RRF_FFRU }, + { "rrxtr", 0xff, INSTR_RRF_FFRU }, + { "sfasr", 0x85, INSTR_RRE_R0 }, + { "sdtr", 0xd3, INSTR_RRR_F0FF }, + { "sxtr", 0xdb, INSTR_RRR_F0FF }, #endif { "lpebr", 0x00, INSTR_RRE_FF }, { "lnebr", 0x01, INSTR_RRE_FF }, @@ -780,6 +873,14 @@ static struct insn opcode_b9[] = { { "cu24", 0xb1, INSTR_RRF_M0RR }, { "cu41", 0xb2, INSTR_RRF_M0RR }, { "cu42", 0xb3, INSTR_RRF_M0RR }, + { "crt", 0x72, INSTR_RRF_U0RR }, + { "cgrt", 0x60, INSTR_RRF_U0RR }, + { "clrt", 0x73, INSTR_RRF_U0RR }, + { "clgrt", 0x61, INSTR_RRF_U0RR }, + { "ptf", 0xa2, INSTR_RRE_R0 }, + { "pfmf", 0xaf, INSTR_RRE_RR }, + { "trte", 0xbf, INSTR_RRF_M0RR }, + { "trtre", 0xbd, INSTR_RRF_M0RR }, #endif { "kmac", 0x1e, INSTR_RRE_RR }, { "lrvr", 0x1f, INSTR_RRE_RR }, @@ -835,6 +936,43 @@ static struct insn opcode_c2[] = { { "cfi", 0x0d, INSTR_RIL_RI }, { "clgfi", 0x0e, INSTR_RIL_RU }, { "clfi", 0x0f, INSTR_RIL_RU }, + { "msfi", 0x01, INSTR_RIL_RI }, + { "msgfi", 0x00, INSTR_RIL_RI }, +#endif + { "", 0, INSTR_INVALID } +}; + +static struct insn opcode_c4[] = { +#ifdef CONFIG_64BIT + { "lrl", 0x0d, INSTR_RIL_RP }, + { "lgrl", 0x08, INSTR_RIL_RP }, + { "lgfrl", 0x0c, INSTR_RIL_RP }, + { "lhrl", 0x05, INSTR_RIL_RP }, + { "lghrl", 0x04, INSTR_RIL_RP }, + { "llgfrl", 0x0e, INSTR_RIL_RP }, + { "llhrl", 0x02, INSTR_RIL_RP }, + { "llghrl", 0x06, INSTR_RIL_RP }, + { "strl", 0x0f, INSTR_RIL_RP }, + { "stgrl", 0x0b, INSTR_RIL_RP }, + { "sthrl", 0x07, INSTR_RIL_RP }, +#endif + { "", 0, INSTR_INVALID } +}; + +static struct insn opcode_c6[] = { +#ifdef CONFIG_64BIT + { "crl", 0x0d, INSTR_RIL_RP }, + { "cgrl", 0x08, INSTR_RIL_RP }, + { "cgfrl", 0x0c, INSTR_RIL_RP }, + { "chrl", 0x05, INSTR_RIL_RP }, + { "cghrl", 0x04, INSTR_RIL_RP }, + { "clrl", 0x0f, INSTR_RIL_RP }, + { "clgrl", 0x0a, INSTR_RIL_RP }, + { "clgfrl", 0x0e, INSTR_RIL_RP }, + { "clhrl", 0x07, INSTR_RIL_RP }, + { "clghrl", 0x06, INSTR_RIL_RP }, + { "pfdrl", 0x02, INSTR_RIL_UP }, + { "exrl", 0x00, INSTR_RIL_RP }, #endif { "", 0, INSTR_INVALID } }; @@ -842,6 +980,8 @@ static struct insn opcode_c2[] = { static struct insn opcode_c8[] = { #ifdef CONFIG_64BIT { "mvcos", 0x00, INSTR_SSF_RRDRD }, + { "ectg", 0x01, INSTR_SSF_RRDRD }, + { "csst", 0x02, INSTR_SSF_RRDRD }, #endif { "", 0, INSTR_INVALID } }; @@ -917,6 +1057,12 @@ static struct insn opcode_e3[] = { { "llgh", 0x91, INSTR_RXY_RRRD }, { "llc", 0x94, INSTR_RXY_RRRD }, { "llh", 0x95, INSTR_RXY_RRRD }, + { "cgh", 0x34, INSTR_RXY_RRRD }, + { "laey", 0x75, INSTR_RXY_RRRD }, + { "ltgf", 0x32, INSTR_RXY_RRRD }, + { "mfy", 0x5c, INSTR_RXY_RRRD }, + { "mhy", 0x7c, INSTR_RXY_RRRD }, + { "pfd", 0x36, INSTR_RXY_URRD }, #endif { "lrv", 0x1e, INSTR_RXY_RRRD }, { "lrvh", 0x1f, INSTR_RXY_RRRD }, @@ -931,6 +1077,15 @@ static struct insn opcode_e3[] = { static struct insn opcode_e5[] = { #ifdef CONFIG_64BIT { "strag", 0x02, INSTR_SSE_RDRD }, + { "chhsi", 0x54, INSTR_SIL_RDI }, + { "chsi", 0x5c, INSTR_SIL_RDI }, + { "cghsi", 0x58, INSTR_SIL_RDI }, + { "clhhsi", 0x55, INSTR_SIL_RDU }, + { "clfhsi", 0x5d, INSTR_SIL_RDU }, + { "clghsi", 0x59, INSTR_SIL_RDU }, + { "mvhhi", 0x44, INSTR_SIL_RDI }, + { "mvhi", 0x4c, INSTR_SIL_RDI }, + { "mvghi", 0x48, INSTR_SIL_RDI }, #endif { "lasp", 0x00, INSTR_SSE_RDRD }, { "tprot", 0x01, INSTR_SSE_RDRD }, @@ -977,6 +1132,11 @@ static struct insn opcode_eb[] = { { "lmy", 0x98, INSTR_RSY_RRRD }, { "lamy", 0x9a, INSTR_RSY_AARD }, { "stamy", 0x9b, INSTR_RSY_AARD }, + { "asi", 0x6a, INSTR_SIY_IRD }, + { "agsi", 0x7a, INSTR_SIY_IRD }, + { "alsi", 0x6e, INSTR_SIY_IRD }, + { "algsi", 0x7e, INSTR_SIY_IRD }, + { "ecag", 0x4c, INSTR_RSY_RRRD }, #endif { "rll", 0x1d, INSTR_RSY_RRRD }, { "mvclu", 0x8e, INSTR_RSY_RRRD }, @@ -988,6 +1148,30 @@ static struct insn opcode_ec[] = { #ifdef CONFIG_64BIT { "brxhg", 0x44, INSTR_RIE_RRP }, { "brxlg", 0x45, INSTR_RIE_RRP }, + { "crb", 0xf6, INSTR_RRS_RRRDU }, + { "cgrb", 0xe4, INSTR_RRS_RRRDU }, + { "crj", 0x76, INSTR_RIE_RRPU }, + { "cgrj", 0x64, INSTR_RIE_RRPU }, + { "cib", 0xfe, INSTR_RIS_RURDI }, + { "cgib", 0xfc, INSTR_RIS_RURDI }, + { "cij", 0x7e, INSTR_RIE_RUPI }, + { "cgij", 0x7c, INSTR_RIE_RUPI }, + { "cit", 0x72, INSTR_RIE_R0IU }, + { "cgit", 0x70, INSTR_RIE_R0IU }, + { "clrb", 0xf7, INSTR_RRS_RRRDU }, + { "clgrb", 0xe5, INSTR_RRS_RRRDU }, + { "clrj", 0x77, INSTR_RIE_RRPU }, + { "clgrj", 0x65, INSTR_RIE_RRPU }, + { "clib", 0xff, INSTR_RIS_RURDU }, + { "clgib", 0xfd, INSTR_RIS_RURDU }, + { "clij", 0x7f, INSTR_RIE_RUPU }, + { "clgij", 0x7d, INSTR_RIE_RUPU }, + { "clfit", 0x73, INSTR_RIE_R0UU }, + { "clgit", 0x71, INSTR_RIE_R0UU }, + { "rnsbg", 0x54, INSTR_RIE_RRUUU }, + { "rxsbg", 0x57, INSTR_RIE_RRUUU }, + { "rosbg", 0x56, INSTR_RIE_RRUUU }, + { "risbg", 0x55, INSTR_RIE_RRUUU }, #endif { "", 0, INSTR_INVALID } }; @@ -1004,6 +1188,16 @@ static struct insn opcode_ed[] = { { "ldy", 0x65, INSTR_RXY_FRRD }, { "stey", 0x66, INSTR_RXY_FRRD }, { "stdy", 0x67, INSTR_RXY_FRRD }, + { "sldt", 0x40, INSTR_RXF_FRRDF }, + { "slxt", 0x48, INSTR_RXF_FRRDF }, + { "srdt", 0x41, INSTR_RXF_FRRDF }, + { "srxt", 0x49, INSTR_RXF_FRRDF }, + { "tdcet", 0x50, INSTR_RXE_FRRD }, + { "tdcdt", 0x54, INSTR_RXE_FRRD }, + { "tdcxt", 0x58, INSTR_RXE_FRRD }, + { "tdget", 0x51, INSTR_RXE_FRRD }, + { "tdgdt", 0x55, INSTR_RXE_FRRD }, + { "tdgxt", 0x59, INSTR_RXE_FRRD }, #endif { "ldeb", 0x04, INSTR_RXE_FRRD }, { "lxdb", 0x05, INSTR_RXE_FRRD }, @@ -1037,6 +1231,7 @@ static struct insn opcode_ed[] = { { "mae", 0x2e, INSTR_RXF_FRRDF }, { "mse", 0x2f, INSTR_RXF_FRRDF }, { "sqe", 0x34, INSTR_RXE_FRRD }, + { "sqd", 0x35, INSTR_RXE_FRRD }, { "mee", 0x37, INSTR_RXE_FRRD }, { "mad", 0x3e, INSTR_RXF_FRRDF }, { "msd", 0x3f, INSTR_RXF_FRRDF }, @@ -1117,6 +1312,12 @@ static struct insn *find_insn(unsigned char *code) case 0xc2: table = opcode_c2; break; + case 0xc4: + table = opcode_c4; + break; + case 0xc6: + table = opcode_c6; + break; case 0xc8: table = opcode_c8; break; diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c index e49e9e0c69f..31d618a443a 100644 --- a/arch/s390/kernel/early.c +++ b/arch/s390/kernel/early.c @@ -214,10 +214,13 @@ static __initdata struct sysinfo_3_2_2 vmms __aligned(PAGE_SIZE); static noinline __init void detect_machine_type(void) { - /* No VM information? Looks like LPAR */ - if (stsi(&vmms, 3, 2, 2) == -ENOSYS) + /* Check current-configuration-level */ + if ((stsi(NULL, 0, 0, 0) >> 28) <= 2) { + S390_lowcore.machine_flags |= MACHINE_FLAG_LPAR; return; - if (!vmms.count) + } + /* Get virtual-machine cpu information. */ + if (stsi(&vmms, 3, 2, 2) == -ENOSYS || !vmms.count) return; /* Running under KVM? If not we assume z/VM */ @@ -402,8 +405,19 @@ static void __init append_to_cmdline(size_t (*ipl_data)(char *, size_t)) static void __init setup_boot_command_line(void) { + int i; + + /* convert arch command line to ascii */ + for (i = 0; i < ARCH_COMMAND_LINE_SIZE; i++) + if (COMMAND_LINE[i] & 0x80) + break; + if (i < ARCH_COMMAND_LINE_SIZE) + EBCASC(COMMAND_LINE, ARCH_COMMAND_LINE_SIZE); + COMMAND_LINE[ARCH_COMMAND_LINE_SIZE-1] = 0; + /* copy arch command line */ - strlcpy(boot_command_line, COMMAND_LINE, ARCH_COMMAND_LINE_SIZE); + strlcpy(boot_command_line, strstrip(COMMAND_LINE), + ARCH_COMMAND_LINE_SIZE); /* append IPL PARM data to the boot command line */ if (MACHINE_IS_VM) diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index e8ef21c51bb..4348f9bc539 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -13,7 +13,6 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/cache.h> -#include <asm/lowcore.h> #include <asm/errno.h> #include <asm/ptrace.h> #include <asm/thread_info.h> diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index f33658f09dd..29fd0f1e6ec 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -9,11 +9,9 @@ * Heiko Carstens <heiko.carstens@de.ibm.com> */ -#include <linux/sys.h> #include <linux/linkage.h> #include <linux/init.h> #include <asm/cache.h> -#include <asm/lowcore.h> #include <asm/errno.h> #include <asm/ptrace.h> #include <asm/thread_info.h> diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 5a82bc68193..314d8f09cf3 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -13,7 +13,7 @@ #include <linux/kernel.h> #include <linux/types.h> #include <trace/syscall.h> -#include <asm/lowcore.h> +#include <asm/asm-offsets.h> #ifdef CONFIG_DYNAMIC_FTRACE diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S index c52b4f7742f..ca4a62bd862 100644 --- a/arch/s390/kernel/head.S +++ b/arch/s390/kernel/head.S @@ -1,5 +1,5 @@ /* - * Copyright IBM Corp. 1999,2009 + * Copyright IBM Corp. 1999,2010 * * Author(s): Hartmut Penner <hp@de.ibm.com> * Martin Schwidefsky <schwidefsky@de.ibm.com> @@ -22,12 +22,9 @@ */ #include <linux/init.h> -#include <asm/setup.h> -#include <asm/lowcore.h> #include <asm/asm-offsets.h> #include <asm/thread_info.h> #include <asm/page.h> -#include <asm/cpu.h> #ifdef CONFIG_64BIT #define ARCH_OFFSET 4 @@ -288,19 +285,7 @@ iplstart: bz .Lagain1 # skip dateset trailer la %r5,0(%r4,%r2) lr %r3,%r2 -.Lidebc: - tm 0(%r5),0x80 # high order bit set ? - bo .Ldocv # yes -> convert from EBCDIC - ahi %r5,-1 - bct %r3,.Lidebc - b .Lnocv -.Ldocv: - l %r3,.Lcvtab - tr 0(256,%r4),0(%r3) # convert parameters to ascii - tr 256(256,%r4),0(%r3) - tr 512(256,%r4),0(%r3) - tr 768(122,%r4),0(%r3) -.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line + la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line mvc 0(256,%r3),0(%r4) mvc 256(256,%r3),256(%r4) mvc 512(256,%r3),512(%r4) @@ -384,7 +369,6 @@ iplstart: .Linitrd:.long _end + 0x400000 # default address of initrd .Lparm: .long PARMAREA .Lstartup: .long startup -.Lcvtab:.long _ebcasc # ebcdic to ascii table .Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40 .byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6 .byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold" @@ -417,13 +401,10 @@ start: .sk8x8: mvc 0(240,%r8),0(%r9) # copy iplparms into buffer .gotr: - l %r10,.tbl # EBCDIC to ASCII table - tr 0(240,%r8),0(%r10) slr %r0,%r0 st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11) st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11) j startup # continue with startup -.tbl: .long _ebcasc # translate table .cmd: .long COMMAND_LINE # address of command line buffer .parm: .long PARMAREA .lowcase: @@ -467,16 +448,15 @@ start: # or linload or SALIPL # .org 0x10000 -startup:basr %r13,0 # get base + .globl startup +startup: + basr %r13,0 # get base .LPG0: xc 0x200(256),0x200 # partially clear lowcore xc 0x300(256),0x300 - l %r1,5f-.LPG0(%r13) - stck 0(%r1) - spt 6f-.LPG0(%r13) - mvc __LC_LAST_UPDATE_CLOCK(8),0(%r1) - mvc __LC_LAST_UPDATE_TIMER(8),6f-.LPG0(%r13) - mvc __LC_EXIT_TIMER(8),5f-.LPG0(%r13) + stck __LC_LAST_UPDATE_CLOCK + spt 5f-.LPG0(%r13) + mvc __LC_LAST_UPDATE_TIMER(8),5f-.LPG0(%r13) #ifndef CONFIG_MARCH_G5 # check capabilities against MARCH_{G5,Z900,Z990,Z9_109,Z10} xc __LC_STFL_FAC_LIST(8),__LC_STFL_FAC_LIST @@ -494,7 +474,6 @@ startup:basr %r13,0 # get base cl %r0,2f+12-.LPG0(%r13) je 3f 1: l %r15,.Lstack-.LPG0(%r13) - ahi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union+THREAD_SIZE ahi %r15,-96 la %r2,.Lals_string-.LPG0(%r13) l %r3,.Lsclp_print-.LPG0(%r13) @@ -505,7 +484,7 @@ startup:basr %r13,0 # get base .Lsclp_print: .long _sclp_print_early .Lstack: - .long init_thread_union + .long 0x8000 + (1<<(PAGE_SHIFT+THREAD_ORDER)) .align 16 2: .long 0x000a0000,0x8badcccc #if defined(CONFIG_64BIT) @@ -532,13 +511,22 @@ startup:basr %r13,0 # get base 3: #endif +#ifdef CONFIG_64BIT + mvi __LC_AR_MODE_ID,1 # set esame flag + slr %r0,%r0 # set cpuid to zero + lhi %r1,2 # mode 2 = esame (dump) + sigp %r1,%r0,0x12 # switch to esame mode + sam64 # switch to 64 bit mode + jg startup_continue +#else + mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0) l %r13,4f-.LPG0(%r13) b 0(%r13) - .align 4 + .align 8 4: .long startup_continue -5: .long sched_clock_base_cc +#endif .align 8 -6: .long 0x7fffffff,0xffffffff +5: .long 0x7fffffff,0xffffffff # # params at 10400 (setup.h) @@ -552,8 +540,4 @@ startup:basr %r13,0 # get base .byte "root=/dev/ram0 ro" .byte 0 -#ifdef CONFIG_64BIT -#include "head64.S" -#else -#include "head31.S" -#endif + .org 0x11000 diff --git a/arch/s390/kernel/head31.S b/arch/s390/kernel/head31.S index 602b508cd4c..1bbcc499d45 100644 --- a/arch/s390/kernel/head31.S +++ b/arch/s390/kernel/head31.S @@ -1,7 +1,7 @@ /* * arch/s390/kernel/head31.S * - * Copyright (C) IBM Corp. 2005,2006 + * Copyright (C) IBM Corp. 2005,2010 * * Author(s): Hartmut Penner <hp@de.ibm.com> * Martin Schwidefsky <schwidefsky@de.ibm.com> @@ -10,13 +10,19 @@ * */ - .org 0x11000 +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page.h> +__HEAD + .globl startup_continue startup_continue: basr %r13,0 # get base .LPG1: - mvi __LC_AR_MODE_ID,0 # set ESA flag (mode 0) + l %r1,.Lbase_cc-.LPG1(%r13) + mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK lctl %c0,%c15,.Lctl-.LPG1(%r13) # load control registers l %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area # move IPL device to lowcore @@ -69,10 +75,12 @@ startup_continue: .Lduald:.rept 8 .long 0x80000000,0,0,0 # invalid access-list entries .endr +.Lbase_cc: + .long sched_clock_base_cc - .org 0x12000 .globl _ehead _ehead: + #ifdef CONFIG_SHARED_KERNEL .org 0x100000 #endif diff --git a/arch/s390/kernel/head64.S b/arch/s390/kernel/head64.S index d984a2a380c..39580e76865 100644 --- a/arch/s390/kernel/head64.S +++ b/arch/s390/kernel/head64.S @@ -1,7 +1,7 @@ /* * arch/s390/kernel/head64.S * - * Copyright (C) IBM Corp. 1999,2006 + * Copyright (C) IBM Corp. 1999,2010 * * Author(s): Hartmut Penner <hp@de.ibm.com> * Martin Schwidefsky <schwidefsky@de.ibm.com> @@ -10,80 +10,17 @@ * */ - .org 0x11000 +#include <linux/init.h> +#include <asm/asm-offsets.h> +#include <asm/thread_info.h> +#include <asm/page.h> +__HEAD + .globl startup_continue startup_continue: - basr %r13,0 # get base -.LPG1: sll %r13,1 # remove high order bit - srl %r13,1 - -#ifdef CONFIG_ZFCPDUMP - - # check if we have been ipled using zfcp dump: - - tm 0xb9,0x01 # test if subchannel is enabled - jno .nodump # subchannel disabled - l %r1,0xb8 - la %r5,.Lipl_schib-.LPG1(%r13) - stsch 0(%r5) # get schib of subchannel - jne .nodump # schib not available - tm 5(%r5),0x01 # devno valid? - jno .nodump - tm 4(%r5),0x80 # qdio capable device? - jno .nodump - l %r2,20(%r0) # address of ipl parameter block - lhi %r3,0 - ic %r3,0x148(%r2) # get opt field - chi %r3,0x20 # load with dump? - jne .nodump - - # store all prefix registers in case of load with dump: - - la %r7,0 # base register for 0 page - la %r8,0 # first cpu - l %r11,.Lpref_arr_ptr-.LPG1(%r13) # address of prefix array - ahi %r11,4 # skip boot cpu - lr %r12,%r11 - ahi %r12,(CONFIG_NR_CPUS*4) # end of prefix array - stap .Lcurrent_cpu+2-.LPG1(%r13) # store current cpu addr -1: - cl %r8,.Lcurrent_cpu-.LPG1(%r13) # is ipl cpu ? - je 4f # if yes get next cpu -2: - lr %r9,%r7 - sigp %r9,%r8,0x9 # stop & store status of cpu - brc 8,3f # accepted - brc 4,4f # status stored: next cpu - brc 2,2b # busy: try again - brc 1,4f # not op: next cpu -3: - mvc 0(4,%r11),264(%r7) # copy prefix register to prefix array - ahi %r11,4 # next element in prefix array - clr %r11,%r12 - je 5f # no more space in prefix array -4: - ahi %r8,1 # next cpu (r8 += 1) - chi %r8,MAX_CPU_ADDRESS # is last possible cpu ? - jle 1b # jump if not last cpu -5: - lhi %r1,2 # mode 2 = esame (dump) - j 6f - .align 4 -.Lipl_schib: - .rept 13 - .long 0 - .endr -.nodump: - lhi %r1,1 # mode 1 = esame (normal ipl) -6: -#else - lhi %r1,1 # mode 1 = esame (normal ipl) -#endif /* CONFIG_ZFCPDUMP */ - mvi __LC_AR_MODE_ID,1 # set esame flag - slr %r0,%r0 # set cpuid to zero - sigp %r1,%r0,0x12 # switch to esame mode - sam64 # switch to 64 bit mode - llgfr %r13,%r13 # clear high-order half of base reg + larl %r1,sched_clock_base_cc + mvc 0(8,%r1),__LC_LAST_UPDATE_CLOCK + larl %r13,.LPG1 # get base lmh %r0,%r15,.Lzero64-.LPG1(%r13) # clear high-order half lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers lg %r12,.Lparmaddr-.LPG1(%r13) # pointer to parameter area @@ -108,6 +45,7 @@ startup_continue: lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space, # virtual and never return ... .align 16 +.LPG1: .Lentry:.quad 0x0000000180000000,_stext .Lctl: .quad 0x04350002 # cr0: various things .quad 0 # cr1: primary space segment table @@ -130,12 +68,6 @@ startup_continue: .Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8 .Lnop: .long 0x07000700 .Lzero64:.fill 16,4,0x0 -#ifdef CONFIG_ZFCPDUMP -.Lcurrent_cpu: - .long 0x0 -.Lpref_arr_ptr: - .long zfcpdump_prefix_array -#endif /* CONFIG_ZFCPDUMP */ .Lparmaddr: .quad PARMAREA .align 64 @@ -146,9 +78,9 @@ startup_continue: .long 0x80000000,0,0,0 # invalid access-list entries .endr - .org 0x12000 .globl _ehead _ehead: + #ifdef CONFIG_SHARED_KERNEL .org 0x100000 #endif diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index 4d73296fed7..7eedbbcb54a 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -553,7 +553,7 @@ out: return rc; } -static void ipl_run(struct shutdown_trigger *trigger) +static void __ipl_run(void *unused) { diag308(DIAG308_IPL, NULL); if (MACHINE_IS_VM) @@ -562,6 +562,11 @@ static void ipl_run(struct shutdown_trigger *trigger) reipl_ccw_dev(&ipl_info.data.ccw.dev_id); } +static void ipl_run(struct shutdown_trigger *trigger) +{ + smp_switch_to_ipl_cpu(__ipl_run, NULL); +} + static int __init ipl_init(void) { int rc; @@ -1039,7 +1044,7 @@ static void get_ipl_string(char *dst, struct ipl_parameter_block *ipb, sprintf(dst + pos, " PARM %s", vmparm); } -static void reipl_run(struct shutdown_trigger *trigger) +static void __reipl_run(void *unused) { struct ccw_dev_id devid; static char buf[128]; @@ -1087,6 +1092,11 @@ static void reipl_run(struct shutdown_trigger *trigger) disabled_wait((unsigned long) __builtin_return_address(0)); } +static void reipl_run(struct shutdown_trigger *trigger) +{ + smp_switch_to_ipl_cpu(__reipl_run, NULL); +} + static void reipl_block_ccw_init(struct ipl_parameter_block *ipb) { ipb->hdr.len = IPL_PARM_BLK_CCW_LEN; @@ -1369,20 +1379,18 @@ static struct kobj_attribute dump_type_attr = static struct kset *dump_kset; -static void dump_run(struct shutdown_trigger *trigger) +static void __dump_run(void *unused) { struct ccw_dev_id devid; static char buf[100]; switch (dump_method) { case DUMP_METHOD_CCW_CIO: - smp_send_stop(); devid.devno = dump_block_ccw->ipl_info.ccw.devno; devid.ssid = 0; reipl_ccw_dev(&devid); break; case DUMP_METHOD_CCW_VM: - smp_send_stop(); sprintf(buf, "STORE STATUS"); __cpcmd(buf, NULL, 0, NULL); sprintf(buf, "IPL %X", dump_block_ccw->ipl_info.ccw.devno); @@ -1396,10 +1404,17 @@ static void dump_run(struct shutdown_trigger *trigger) diag308(DIAG308_SET, dump_block_fcp); diag308(DIAG308_DUMP, NULL); break; - case DUMP_METHOD_NONE: - return; + default: + break; } - printk(KERN_EMERG "Dump failed!\n"); +} + +static void dump_run(struct shutdown_trigger *trigger) +{ + if (dump_method == DUMP_METHOD_NONE) + return; + smp_send_stop(); + smp_switch_to_ipl_cpu(__dump_run, NULL); } static int __init dump_ccw_init(void) @@ -1577,7 +1592,7 @@ static void vmcmd_run(struct shutdown_trigger *trigger) static int vmcmd_init(void) { if (!MACHINE_IS_VM) - return -ENOTSUPP; + return -EOPNOTSUPP; vmcmd_kset = kset_create_and_add("vmcmd", NULL, firmware_kobj); if (!vmcmd_kset) return -ENOMEM; @@ -1595,7 +1610,7 @@ static void stop_run(struct shutdown_trigger *trigger) { if (strcmp(trigger->name, ON_PANIC_STR) == 0) disabled_wait((unsigned long) __builtin_return_address(0)); - while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) cpu_relax(); for (;;); } @@ -1902,7 +1917,6 @@ void __init ipl_update_parameters(void) void __init ipl_save_parameters(void) { struct cio_iplinfo iplinfo; - unsigned int *ipl_ptr; void *src, *dst; if (cio_get_iplinfo(&iplinfo)) @@ -1913,11 +1927,10 @@ void __init ipl_save_parameters(void) if (!iplinfo.is_qdio) return; ipl_flags |= IPL_PARMBLOCK_VALID; - ipl_ptr = (unsigned int *)__LC_IPL_PARMBLOCK_PTR; - src = (void *)(unsigned long)*ipl_ptr; + src = (void *)(unsigned long)S390_lowcore.ipl_parmblock_ptr; dst = (void *)IPL_PARMBLOCK_ORIGIN; memmove(dst, src, PAGE_SIZE); - *ipl_ptr = IPL_PARMBLOCK_ORIGIN; + S390_lowcore.ipl_parmblock_ptr = IPL_PARMBLOCK_ORIGIN; } static LIST_HEAD(rcall); diff --git a/arch/s390/kernel/machine_kexec.c b/arch/s390/kernel/machine_kexec.c index 131d7ee8b41..a922d51df6b 100644 --- a/arch/s390/kernel/machine_kexec.c +++ b/arch/s390/kernel/machine_kexec.c @@ -54,11 +54,11 @@ void machine_shutdown(void) { } -void machine_kexec(struct kimage *image) +static void __machine_kexec(void *data) { relocate_kernel_t data_mover; + struct kimage *image = data; - smp_send_stop(); pfault_fini(); s390_reset_system(); @@ -68,3 +68,9 @@ void machine_kexec(struct kimage *image) (*data_mover)(&image->head, image->start); for (;;); } + +void machine_kexec(struct kimage *image) +{ + smp_send_stop(); + smp_switch_to_ipl_cpu(__machine_kexec, image); +} diff --git a/arch/s390/kernel/reipl.S b/arch/s390/kernel/reipl.S index 2f481cc3d1c..cb899d9f850 100644 --- a/arch/s390/kernel/reipl.S +++ b/arch/s390/kernel/reipl.S @@ -6,7 +6,7 @@ * Author(s): Holger Smolinski (Holger.Smolinski@de.ibm.com) */ -#include <asm/lowcore.h> +#include <asm/asm-offsets.h> # # do_reipl_asm diff --git a/arch/s390/kernel/reipl64.S b/arch/s390/kernel/reipl64.S index 774147824c3..5e73dee63ba 100644 --- a/arch/s390/kernel/reipl64.S +++ b/arch/s390/kernel/reipl64.S @@ -4,7 +4,7 @@ * Denis Joseph Barrow, */ -#include <asm/lowcore.h> +#include <asm/asm-offsets.h> # # do_reipl_asm diff --git a/arch/s390/kernel/sclp.S b/arch/s390/kernel/sclp.S index e27ca63076d..27af3bf3a00 100644 --- a/arch/s390/kernel/sclp.S +++ b/arch/s390/kernel/sclp.S @@ -9,8 +9,10 @@ */ LC_EXT_NEW_PSW = 0x58 # addr of ext int handler +LC_EXT_NEW_PSW_64 = 0x1b0 # addr of ext int handler 64 bit LC_EXT_INT_PARAM = 0x80 # addr of ext int parameter LC_EXT_INT_CODE = 0x86 # addr of ext int code +LC_AR_MODE_ID = 0xa3 # # Subroutine which waits synchronously until either an external interruption @@ -30,8 +32,16 @@ _sclp_wait_int: .LbaseS1: ahi %r15,-96 # create stack frame la %r8,LC_EXT_NEW_PSW # register int handler - mvc .LoldpswS1-.LbaseS1(8,%r13),0(%r8) - mvc 0(8,%r8),.LextpswS1-.LbaseS1(%r13) + la %r9,.LextpswS1-.LbaseS1(%r13) +#ifdef CONFIG_64BIT + tm LC_AR_MODE_ID,1 + jno .Lesa1 + la %r8,LC_EXT_NEW_PSW_64 # register int handler 64 bit + la %r9,.LextpswS1_64-.LbaseS1(%r13) +.Lesa1: +#endif + mvc .LoldpswS1-.LbaseS1(16,%r13),0(%r8) + mvc 0(16,%r8),0(%r9) lhi %r6,0x0200 # cr mask for ext int (cr0.54) ltr %r2,%r2 jz .LsetctS1 @@ -64,15 +74,19 @@ _sclp_wait_int: .LtimeoutS1: lctl %c0,%c0,.LctlS1-.LbaseS1(%r13) # restore interrupt setting # restore old handler - mvc 0(8,%r8),.LoldpswS1-.LbaseS1(%r13) + mvc 0(16,%r8),.LoldpswS1-.LbaseS1(%r13) lm %r6,%r15,120(%r15) # restore registers br %r14 # return to caller .align 8 .LoldpswS1: - .long 0, 0 # old ext int PSW + .long 0, 0, 0, 0 # old ext int PSW .LextpswS1: .long 0x00080000, 0x80000000+.LwaitS1 # PSW to handle ext int +#ifdef CONFIG_64BIT +.LextpswS1_64: + .quad 0x0000000180000000, .LwaitS1 # PSW to handle ext int, 64 bit +#endif .LwaitpswS1: .long 0x010a0000, 0x00000000+.LloopS1 # PSW to wait for ext int .LtimeS1: @@ -250,6 +264,13 @@ _sclp_print: _sclp_print_early: stm %r6,%r15,24(%r15) # save registers ahi %r15,-96 # create stack frame +#ifdef CONFIG_64BIT + tm LC_AR_MODE_ID,1 + jno .Lesa2 + ahi %r15,-80 + stmh %r6,%r15,96(%r15) # store upper register halves +.Lesa2: +#endif lr %r10,%r2 # save string pointer lhi %r2,0 bras %r14,_sclp_setup # enable console @@ -262,6 +283,13 @@ _sclp_print_early: lhi %r2,1 bras %r14,_sclp_setup # disable console .LendS5: +#ifdef CONFIG_64BIT + tm LC_AR_MODE_ID,1 + jno .Lesa3 + lmh %r6,%r15,96(%r15) # store upper register halves + ahi %r15,80 +.Lesa3: +#endif lm %r6,%r15,120(%r15) # restore registers br %r14 diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 8d8957b38ab..77a63ae419f 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -396,15 +396,12 @@ static void __init setup_lowcore(void) { struct _lowcore *lc; - int lc_pages; /* * Setup lowcore for boot cpu */ - lc_pages = sizeof(void *) == 8 ? 2 : 1; - lc = (struct _lowcore *) - __alloc_bootmem(lc_pages * PAGE_SIZE, lc_pages * PAGE_SIZE, 0); - memset(lc, 0, lc_pages * PAGE_SIZE); + BUILD_BUG_ON(sizeof(struct _lowcore) != LC_PAGES * 4096); + lc = __alloc_bootmem(LC_PAGES * PAGE_SIZE, LC_PAGES * PAGE_SIZE, 0); lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) restart_int_handler; @@ -804,7 +801,7 @@ setup_arch(char **cmdline_p) if (MACHINE_IS_VM) pr_info("Linux is running as a z/VM " "guest operating system in 31-bit mode\n"); - else + else if (MACHINE_IS_LPAR) pr_info("Linux is running natively in 31-bit mode\n"); if (MACHINE_HAS_IEEE) pr_info("The hardware system has IEEE compatible " @@ -818,7 +815,7 @@ setup_arch(char **cmdline_p) "guest operating system in 64-bit mode\n"); else if (MACHINE_IS_KVM) pr_info("Linux is running under KVM in 64-bit mode\n"); - else + else if (MACHINE_IS_LPAR) pr_info("Linux is running natively in 64-bit mode\n"); #endif /* CONFIG_64BIT */ diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 76a6fdd46c4..8b10127c00a 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -36,6 +36,7 @@ #include <linux/cpu.h> #include <linux/timex.h> #include <linux/bootmem.h> +#include <asm/asm-offsets.h> #include <asm/ipl.h> #include <asm/setup.h> #include <asm/sigp.h> @@ -53,7 +54,7 @@ #include "entry.h" /* logical cpu to cpu address */ -int __cpu_logical_map[NR_CPUS]; +unsigned short __cpu_logical_map[NR_CPUS]; static struct task_struct *current_set[NR_CPUS]; @@ -72,13 +73,13 @@ static int cpu_management; static DEFINE_PER_CPU(struct cpu, cpu_devices); -static void smp_ext_bitcall(int, ec_bit_sig); +static void smp_ext_bitcall(int, int); -static int cpu_stopped(int cpu) +static int raw_cpu_stopped(int cpu) { - __u32 status; + u32 status; - switch (signal_processor_ps(&status, 0, cpu, sigp_sense)) { + switch (raw_sigp_ps(&status, 0, cpu, sigp_sense)) { case sigp_status_stored: /* Check for stopped and check stop state */ if (status & 0x50) @@ -90,6 +91,44 @@ static int cpu_stopped(int cpu) return 0; } +static inline int cpu_stopped(int cpu) +{ + return raw_cpu_stopped(cpu_logical_map(cpu)); +} + +void smp_switch_to_ipl_cpu(void (*func)(void *), void *data) +{ + struct _lowcore *lc, *current_lc; + struct stack_frame *sf; + struct pt_regs *regs; + unsigned long sp; + + if (smp_processor_id() == 0) + func(data); + __load_psw_mask(PSW_BASE_BITS | PSW_DEFAULT_KEY); + /* Disable lowcore protection */ + __ctl_clear_bit(0, 28); + current_lc = lowcore_ptr[smp_processor_id()]; + lc = lowcore_ptr[0]; + if (!lc) + lc = current_lc; + lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY; + lc->restart_psw.addr = PSW_ADDR_AMODE | (unsigned long) smp_restart_cpu; + if (!cpu_online(0)) + smp_switch_to_cpu(func, data, 0, stap(), __cpu_logical_map[0]); + while (sigp(0, sigp_stop_and_store_status) == sigp_busy) + cpu_relax(); + sp = lc->panic_stack; + sp -= sizeof(struct pt_regs); + regs = (struct pt_regs *) sp; + memcpy(®s->gprs, ¤t_lc->gpregs_save_area, sizeof(regs->gprs)); + regs->psw = lc->psw_save_area; + sp -= STACK_FRAME_OVERHEAD; + sf = (struct stack_frame *) sp; + sf->back_chain = regs->gprs[15]; + smp_switch_to_cpu(func, data, sp, stap(), __cpu_logical_map[0]); +} + void smp_send_stop(void) { int cpu, rc; @@ -103,7 +142,7 @@ void smp_send_stop(void) if (cpu == smp_processor_id()) continue; do { - rc = signal_processor(cpu, sigp_stop); + rc = sigp(cpu, sigp_stop); } while (rc == sigp_busy); while (!cpu_stopped(cpu)) @@ -139,13 +178,13 @@ static void do_ext_call_interrupt(__u16 code) * Send an external call sigp to another cpu and return without waiting * for its completion. */ -static void smp_ext_bitcall(int cpu, ec_bit_sig sig) +static void smp_ext_bitcall(int cpu, int sig) { /* * Set signaling bit in lowcore of target cpu and kick it */ set_bit(sig, (unsigned long *) &lowcore_ptr[cpu]->ext_call_fast); - while (signal_processor(cpu, sigp_emergency_signal) == sigp_busy) + while (sigp(cpu, sigp_emergency_signal) == sigp_busy) udelay(10); } @@ -239,24 +278,8 @@ void smp_ctl_clear_bit(int cr, int bit) } EXPORT_SYMBOL(smp_ctl_clear_bit); -/* - * In early ipl state a temp. logically cpu number is needed, so the sigp - * functions can be used to sense other cpus. Since NR_CPUS is >= 2 on - * CONFIG_SMP and the ipl cpu is logical cpu 0, it must be 1. - */ -#define CPU_INIT_NO 1 - #ifdef CONFIG_ZFCPDUMP -/* - * zfcpdump_prefix_array holds prefix registers for the following scenario: - * 64 bit zfcpdump kernel and 31 bit kernel which is to be dumped. We have to - * save its prefix registers, since they get lost, when switching from 31 bit - * to 64 bit. - */ -unsigned int zfcpdump_prefix_array[NR_CPUS + 1] \ - __attribute__((__section__(".data"))); - static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) { if (ipl_info.type != IPL_TYPE_FCP_DUMP) @@ -266,21 +289,15 @@ static void __init smp_get_save_area(unsigned int cpu, unsigned int phy_cpu) "the dump\n", cpu, NR_CPUS - 1); return; } - zfcpdump_save_areas[cpu] = kmalloc(sizeof(union save_area), GFP_KERNEL); - __cpu_logical_map[CPU_INIT_NO] = (__u16) phy_cpu; - while (signal_processor(CPU_INIT_NO, sigp_stop_and_store_status) == - sigp_busy) + zfcpdump_save_areas[cpu] = kmalloc(sizeof(struct save_area), GFP_KERNEL); + while (raw_sigp(phy_cpu, sigp_stop_and_store_status) == sigp_busy) cpu_relax(); memcpy(zfcpdump_save_areas[cpu], (void *)(unsigned long) store_prefix() + SAVE_AREA_BASE, - SAVE_AREA_SIZE); -#ifdef CONFIG_64BIT - /* copy original prefix register */ - zfcpdump_save_areas[cpu]->s390x.pref_reg = zfcpdump_prefix_array[cpu]; -#endif + sizeof(struct save_area)); } -union save_area *zfcpdump_save_areas[NR_CPUS + 1]; +struct save_area *zfcpdump_save_areas[NR_CPUS + 1]; EXPORT_SYMBOL_GPL(zfcpdump_save_areas); #else @@ -389,8 +406,7 @@ static void __init smp_detect_cpus(void) for (cpu = 0; cpu <= MAX_CPU_ADDRESS; cpu++) { if (cpu == boot_cpu_addr) continue; - __cpu_logical_map[CPU_INIT_NO] = cpu; - if (!cpu_stopped(CPU_INIT_NO)) + if (!raw_cpu_stopped(cpu)) continue; smp_get_save_area(c_cpus, cpu); c_cpus++; @@ -413,8 +429,7 @@ static void __init smp_detect_cpus(void) cpu_addr = info->cpu[cpu].address; if (cpu_addr == boot_cpu_addr) continue; - __cpu_logical_map[CPU_INIT_NO] = cpu_addr; - if (!cpu_stopped(CPU_INIT_NO)) { + if (!raw_cpu_stopped(cpu_addr)) { s_cpus++; continue; } @@ -533,18 +548,18 @@ static void smp_free_lowcore(int cpu) /* Upping and downing of CPUs */ int __cpuinit __cpu_up(unsigned int cpu) { - struct task_struct *idle; struct _lowcore *cpu_lowcore; + struct task_struct *idle; struct stack_frame *sf; - sigp_ccode ccode; u32 lowcore; + int ccode; if (smp_cpu_state[cpu] != CPU_STATE_CONFIGURED) return -EIO; if (smp_alloc_lowcore(cpu)) return -ENOMEM; do { - ccode = signal_processor(cpu, sigp_initial_cpu_reset); + ccode = sigp(cpu, sigp_initial_cpu_reset); if (ccode == sigp_busy) udelay(10); if (ccode == sigp_not_operational) @@ -552,7 +567,7 @@ int __cpuinit __cpu_up(unsigned int cpu) } while (ccode == sigp_busy); lowcore = (u32)(unsigned long)lowcore_ptr[cpu]; - while (signal_processor_p(lowcore, cpu, sigp_set_prefix) == sigp_busy) + while (sigp_p(lowcore, cpu, sigp_set_prefix) == sigp_busy) udelay(10); idle = current_set[cpu]; @@ -578,7 +593,7 @@ int __cpuinit __cpu_up(unsigned int cpu) cpu_lowcore->ftrace_func = S390_lowcore.ftrace_func; eieio(); - while (signal_processor(cpu, sigp_restart) == sigp_busy) + while (sigp(cpu, sigp_restart) == sigp_busy) udelay(10); while (!cpu_online(cpu)) @@ -640,7 +655,7 @@ void __cpu_die(unsigned int cpu) /* Wait until target cpu is down */ while (!cpu_stopped(cpu)) cpu_relax(); - while (signal_processor_p(0, cpu, sigp_set_prefix) == sigp_busy) + while (sigp_p(0, cpu, sigp_set_prefix) == sigp_busy) udelay(10); smp_free_lowcore(cpu); pr_info("Processor %d stopped\n", cpu); @@ -649,7 +664,7 @@ void __cpu_die(unsigned int cpu) void cpu_die(void) { idle_task_exit(); - while (signal_processor(smp_processor_id(), sigp_stop) == sigp_busy) + while (sigp(smp_processor_id(), sigp_stop) == sigp_busy) cpu_relax(); for (;;); } @@ -765,7 +780,8 @@ static ssize_t cpu_configure_store(struct sys_device *dev, get_online_cpus(); mutex_lock(&smp_cpu_state_mutex); rc = -EBUSY; - if (cpu_online(cpu)) + /* disallow configuration changes of online cpus and cpu 0 */ + if (cpu_online(cpu) || cpu == 0) goto out; rc = 0; switch (val) { diff --git a/arch/s390/kernel/switch_cpu.S b/arch/s390/kernel/switch_cpu.S new file mode 100644 index 00000000000..469f11b574f --- /dev/null +++ b/arch/s390/kernel/switch_cpu.S @@ -0,0 +1,58 @@ +/* + * 31-bit switch cpu code + * + * Copyright IBM Corp. 2009 + * + */ + +#include <asm/asm-offsets.h> +#include <asm/ptrace.h> + +# smp_switch_to_cpu switches to destination cpu and executes the passed function +# Parameter: %r2 - function to call +# %r3 - function parameter +# %r4 - stack poiner +# %r5 - current cpu +# %r6 - destination cpu + + .section .text + .align 4 + .globl smp_switch_to_cpu +smp_switch_to_cpu: + stm %r6,%r15,__SF_GPRS(%r15) + lr %r1,%r15 + ahi %r15,-STACK_FRAME_OVERHEAD + st %r1,__SF_BACKCHAIN(%r15) + basr %r13,0 +0: la %r1,.gprregs_addr-0b(%r13) + l %r1,0(%r1) + stm %r0,%r15,0(%r1) +1: sigp %r0,%r6,__SIGP_RESTART /* start destination CPU */ + brc 2,1b /* busy, try again */ +2: sigp %r0,%r5,__SIGP_STOP /* stop current CPU */ + brc 2,2b /* busy, try again */ +3: j 3b + + .globl smp_restart_cpu +smp_restart_cpu: + basr %r13,0 +0: la %r1,.gprregs_addr-0b(%r13) + l %r1,0(%r1) + lm %r0,%r15,0(%r1) +1: sigp %r0,%r5,__SIGP_SENSE /* Wait for calling CPU */ + brc 10,1b /* busy, accepted (status 0), running */ + tmll %r0,0x40 /* Test if calling CPU is stopped */ + jz 1b + ltr %r4,%r4 /* New stack ? */ + jz 1f + lr %r15,%r4 +1: basr %r14,%r2 + +.gprregs_addr: + .long .gprregs + + .section .data,"aw",@progbits +.gprregs: + .rept 16 + .long 0 + .endr diff --git a/arch/s390/kernel/switch_cpu64.S b/arch/s390/kernel/switch_cpu64.S new file mode 100644 index 00000000000..d94aacc898c --- /dev/null +++ b/arch/s390/kernel/switch_cpu64.S @@ -0,0 +1,51 @@ +/* + * 64-bit switch cpu code + * + * Copyright IBM Corp. 2009 + * + */ + +#include <asm/asm-offsets.h> +#include <asm/ptrace.h> + +# smp_switch_to_cpu switches to destination cpu and executes the passed function +# Parameter: %r2 - function to call +# %r3 - function parameter +# %r4 - stack poiner +# %r5 - current cpu +# %r6 - destination cpu + + .section .text + .align 4 + .globl smp_switch_to_cpu +smp_switch_to_cpu: + stmg %r6,%r15,__SF_GPRS(%r15) + lgr %r1,%r15 + aghi %r15,-STACK_FRAME_OVERHEAD + stg %r1,__SF_BACKCHAIN(%r15) + larl %r1,.gprregs + stmg %r0,%r15,0(%r1) +1: sigp %r0,%r6,__SIGP_RESTART /* start destination CPU */ + brc 2,1b /* busy, try again */ +2: sigp %r0,%r5,__SIGP_STOP /* stop current CPU */ + brc 2,2b /* busy, try again */ +3: j 3b + + .globl smp_restart_cpu +smp_restart_cpu: + larl %r1,.gprregs + lmg %r0,%r15,0(%r1) +1: sigp %r0,%r5,__SIGP_SENSE /* Wait for calling CPU */ + brc 10,1b /* busy, accepted (status 0), running */ + tmll %r0,0x40 /* Test if calling CPU is stopped */ + jz 1b + ltgr %r4,%r4 /* New stack ? */ + jz 1f + lgr %r15,%r4 +1: basr %r14,%r2 + + .section .data,"aw",@progbits +.gprregs: + .rept 16 + .quad 0 + .endr diff --git a/arch/s390/kernel/swsusp_asm64.S b/arch/s390/kernel/swsusp_asm64.S index 0c26cc1898e..b354427e03b 100644 --- a/arch/s390/kernel/swsusp_asm64.S +++ b/arch/s390/kernel/swsusp_asm64.S @@ -176,7 +176,7 @@ pgm_check_entry: cgr %r1,%r2 je restore_registers /* r1 = r2 -> nothing to do */ larl %r4,.Lrestart_suspend_psw /* Set new restart PSW */ - mvc __LC_RESTART_PSW(16,%r0),0(%r4) + mvc __LC_RST_NEW_PSW(16,%r0),0(%r4) 3: sigp %r9,%r1,__SIGP_INITIAL_CPU_RESET brc 8,4f /* accepted */ diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index 65065ac48ed..a8f93f1705a 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -51,14 +51,6 @@ #define USECS_PER_JIFFY ((unsigned long) 1000000/HZ) #define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12) -/* - * Create a small time difference between the timer interrupts - * on the different cpus to avoid lock contention. - */ -#define CPU_DEVIATION (smp_processor_id() << 12) - -#define TICK_SIZE tick - u64 sched_clock_base_cc = -1; /* Force to data section. */ EXPORT_SYMBOL_GPL(sched_clock_base_cc); diff --git a/arch/s390/kernel/vdso.c b/arch/s390/kernel/vdso.c index 5f99e66c51c..6bc9c197aa9 100644 --- a/arch/s390/kernel/vdso.c +++ b/arch/s390/kernel/vdso.c @@ -23,6 +23,7 @@ #include <linux/security.h> #include <linux/bootmem.h> #include <linux/compat.h> +#include <asm/asm-offsets.h> #include <asm/pgtable.h> #include <asm/system.h> #include <asm/processor.h> diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index 8300309698f..9e4c84187cf 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -39,7 +39,7 @@ static int __diag_ipl_functions(struct kvm_vcpu *vcpu) vcpu->run->s390_reset_flags = 0; break; default: - return -ENOTSUPP; + return -EOPNOTSUPP; } atomic_clear_mask(CPUSTAT_RUNNING, &vcpu->arch.sie_block->cpuflags); @@ -62,6 +62,6 @@ int kvm_s390_handle_diag(struct kvm_vcpu *vcpu) case 0x308: return __diag_ipl_functions(vcpu); default: - return -ENOTSUPP; + return -EOPNOTSUPP; } } diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index b40096494e4..3ddc30895e3 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -32,7 +32,7 @@ static int handle_lctlg(struct kvm_vcpu *vcpu) vcpu->stat.instruction_lctlg++; if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f) - return -ENOTSUPP; + return -EOPNOTSUPP; useraddr = disp2; if (base2) @@ -138,7 +138,7 @@ static int handle_stop(struct kvm_vcpu *vcpu) rc = __kvm_s390_vcpu_store_status(vcpu, KVM_S390_STORE_STATUS_NOADDR); if (rc >= 0) - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; } if (vcpu->arch.local_int.action_bits & ACTION_RELOADVCPU_ON_STOP) { @@ -150,7 +150,7 @@ static int handle_stop(struct kvm_vcpu *vcpu) if (vcpu->arch.local_int.action_bits & ACTION_STOP_ON_STOP) { vcpu->arch.local_int.action_bits &= ~ACTION_STOP_ON_STOP; VCPU_EVENT(vcpu, 3, "%s", "cpu stopped"); - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; } spin_unlock_bh(&vcpu->arch.local_int.lock); @@ -171,9 +171,9 @@ static int handle_validity(struct kvm_vcpu *vcpu) 2*PAGE_SIZE); if (rc) /* user will receive sigsegv, exit to user */ - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; } else - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; if (rc) VCPU_EVENT(vcpu, 2, "unhandled validity intercept code %d", @@ -189,7 +189,7 @@ static int handle_instruction(struct kvm_vcpu *vcpu) handler = instruction_handlers[vcpu->arch.sie_block->ipa >> 8]; if (handler) return handler(vcpu); - return -ENOTSUPP; + return -EOPNOTSUPP; } static int handle_prog(struct kvm_vcpu *vcpu) @@ -206,7 +206,7 @@ static int handle_instruction_and_prog(struct kvm_vcpu *vcpu) rc = handle_instruction(vcpu); rc2 = handle_prog(vcpu); - if (rc == -ENOTSUPP) + if (rc == -EOPNOTSUPP) vcpu->arch.sie_block->icptcode = 0x04; if (rc) return rc; @@ -231,9 +231,9 @@ int kvm_handle_sie_intercept(struct kvm_vcpu *vcpu) u8 code = vcpu->arch.sie_block->icptcode; if (code & 3 || (code >> 2) >= ARRAY_SIZE(intercept_funcs)) - return -ENOTSUPP; + return -EOPNOTSUPP; func = intercept_funcs[code >> 2]; if (func) return func(vcpu); - return -ENOTSUPP; + return -EOPNOTSUPP; } diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 43486c2408e..834774d8d5f 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -10,12 +10,12 @@ * Author(s): Carsten Otte <cotte@de.ibm.com> */ -#include <asm/lowcore.h> -#include <asm/uaccess.h> -#include <linux/hrtimer.h> #include <linux/interrupt.h> #include <linux/kvm_host.h> +#include <linux/hrtimer.h> #include <linux/signal.h> +#include <asm/asm-offsets.h> +#include <asm/uaccess.h> #include "kvm-s390.h" #include "gaccess.h" @@ -187,8 +187,8 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, if (rc == -EFAULT) exception = 1; - rc = put_guest_u64(vcpu, __LC_PFAULT_INTPARM, - inti->ext.ext_params2); + rc = put_guest_u64(vcpu, __LC_EXT_PARAMS2, + inti->ext.ext_params2); if (rc == -EFAULT) exception = 1; break; @@ -342,7 +342,7 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) if (psw_interrupts_disabled(vcpu)) { VCPU_EVENT(vcpu, 3, "%s", "disabled wait"); __unset_cpu_idle(vcpu); - return -ENOTSUPP; /* disabled wait */ + return -EOPNOTSUPP; /* disabled wait */ } if (psw_extint_disabled(vcpu) || diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f8bcaefd7d3..3fa0a10e466 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -23,6 +23,7 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/timer.h> +#include <asm/asm-offsets.h> #include <asm/lowcore.h> #include <asm/pgtable.h> #include <asm/nmi.h> @@ -543,7 +544,7 @@ rerun_vcpu: rc = -EINTR; } - if (rc == -ENOTSUPP) { + if (rc == -EOPNOTSUPP) { /* intercept cannot be handled in-kernel, prepare kvm-run */ kvm_run->exit_reason = KVM_EXIT_S390_SIEIC; kvm_run->s390_sieic.icptcode = vcpu->arch.sie_block->icptcode; @@ -603,45 +604,45 @@ int __kvm_s390_vcpu_store_status(struct kvm_vcpu *vcpu, unsigned long addr) } else prefix = 0; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, fp_regs), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, fp_regs), vcpu->arch.guest_fpregs.fprs, 128, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, gp_regs), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, gp_regs), vcpu->arch.guest_gprs, 128, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, psw), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, psw), &vcpu->arch.sie_block->gpsw, 16, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, pref_reg), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, pref_reg), &vcpu->arch.sie_block->prefix, 4, prefix)) return -EFAULT; if (__guestcopy(vcpu, - addr + offsetof(struct save_area_s390x, fp_ctrl_reg), + addr + offsetof(struct save_area, fp_ctrl_reg), &vcpu->arch.guest_fpregs.fpc, 4, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, tod_reg), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, tod_reg), &vcpu->arch.sie_block->todpr, 4, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, timer), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, timer), &vcpu->arch.sie_block->cputm, 8, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, clk_cmp), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, clk_cmp), &vcpu->arch.sie_block->ckc, 8, prefix)) return -EFAULT; - if (__guestcopy(vcpu, addr + offsetof(struct save_area_s390x, acc_regs), + if (__guestcopy(vcpu, addr + offsetof(struct save_area, acc_regs), &vcpu->arch.guest_acrs, 64, prefix)) return -EFAULT; if (__guestcopy(vcpu, - addr + offsetof(struct save_area_s390x, ctrl_regs), + addr + offsetof(struct save_area, ctrl_regs), &vcpu->arch.sie_block->gcr, 128, prefix)) return -EFAULT; return 0; diff --git a/arch/s390/kvm/priv.c b/arch/s390/kvm/priv.c index d426aac8095..28c55677eb3 100644 --- a/arch/s390/kvm/priv.c +++ b/arch/s390/kvm/priv.c @@ -323,5 +323,5 @@ int kvm_s390_handle_b2(struct kvm_vcpu *vcpu) else return handler(vcpu); } - return -ENOTSUPP; + return -EOPNOTSUPP; } diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 15ee1111de5..241a48459b6 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -172,7 +172,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter) rc = 0; /* order accepted */ break; default: - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; } return rc; } @@ -293,7 +293,7 @@ int kvm_s390_handle_sigp(struct kvm_vcpu *vcpu) vcpu->stat.instruction_sigp_restart++; /* user space must know about restart */ default: - return -ENOTSUPP; + return -EOPNOTSUPP; } if (rc < 0) diff --git a/arch/s390/lib/Makefile b/arch/s390/lib/Makefile index 97975ec7a27..cd54a1c352a 100644 --- a/arch/s390/lib/Makefile +++ b/arch/s390/lib/Makefile @@ -2,7 +2,7 @@ # Makefile for s390-specific library files.. # -lib-y += delay.o string.o uaccess_std.o uaccess_pt.o +lib-y += delay.o string.o uaccess_std.o uaccess_pt.o usercopy.o obj-$(CONFIG_32BIT) += div64.o qrnnd.o ucmpdi2.o lib-$(CONFIG_64BIT) += uaccess_mvcos.o lib-$(CONFIG_SMP) += spinlock.o diff --git a/arch/s390/lib/spinlock.c b/arch/s390/lib/spinlock.c index cff327f109a..91754ffb920 100644 --- a/arch/s390/lib/spinlock.c +++ b/arch/s390/lib/spinlock.c @@ -43,16 +43,24 @@ void arch_spin_lock_wait(arch_spinlock_t *lp) { int count = spin_retry; unsigned int cpu = ~smp_processor_id(); + unsigned int owner; while (1) { - if (count-- <= 0) { - unsigned int owner = lp->owner_cpu; - if (owner != 0) - _raw_yield_cpu(~owner); - count = spin_retry; + owner = lp->owner_cpu; + if (!owner || smp_vcpu_scheduled(~owner)) { + for (count = spin_retry; count > 0; count--) { + if (arch_spin_is_locked(lp)) + continue; + if (_raw_compare_and_swap(&lp->owner_cpu, 0, + cpu) == 0) + return; + } + if (MACHINE_IS_LPAR) + continue; } - if (arch_spin_is_locked(lp)) - continue; + owner = lp->owner_cpu; + if (owner) + _raw_yield_cpu(~owner); if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return; } @@ -63,17 +71,27 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags) { int count = spin_retry; unsigned int cpu = ~smp_processor_id(); + unsigned int owner; local_irq_restore(flags); while (1) { - if (count-- <= 0) { - unsigned int owner = lp->owner_cpu; - if (owner != 0) - _raw_yield_cpu(~owner); - count = spin_retry; + owner = lp->owner_cpu; + if (!owner || smp_vcpu_scheduled(~owner)) { + for (count = spin_retry; count > 0; count--) { + if (arch_spin_is_locked(lp)) + continue; + local_irq_disable(); + if (_raw_compare_and_swap(&lp->owner_cpu, 0, + cpu) == 0) + return; + local_irq_restore(flags); + } + if (MACHINE_IS_LPAR) + continue; } - if (arch_spin_is_locked(lp)) - continue; + owner = lp->owner_cpu; + if (owner) + _raw_yield_cpu(~owner); local_irq_disable(); if (_raw_compare_and_swap(&lp->owner_cpu, 0, cpu) == 0) return; @@ -100,8 +118,11 @@ EXPORT_SYMBOL(arch_spin_trylock_retry); void arch_spin_relax(arch_spinlock_t *lock) { unsigned int cpu = lock->owner_cpu; - if (cpu != 0) - _raw_yield_cpu(~cpu); + if (cpu != 0) { + if (MACHINE_IS_VM || MACHINE_IS_KVM || + !smp_vcpu_scheduled(~cpu)) + _raw_yield_cpu(~cpu); + } } EXPORT_SYMBOL(arch_spin_relax); diff --git a/arch/s390/lib/usercopy.c b/arch/s390/lib/usercopy.c new file mode 100644 index 00000000000..14b363fec8a --- /dev/null +++ b/arch/s390/lib/usercopy.c @@ -0,0 +1,8 @@ +#include <linux/module.h> +#include <linux/bug.h> + +void copy_from_user_overflow(void) +{ + WARN(1, "Buffer overflow detected!\n"); +} +EXPORT_SYMBOL(copy_from_user_overflow); diff --git a/arch/s390/mm/extmem.c b/arch/s390/mm/extmem.c index 5c845712960..6409fd57eb0 100644 --- a/arch/s390/mm/extmem.c +++ b/arch/s390/mm/extmem.c @@ -309,7 +309,7 @@ query_segment_type (struct dcss_segment *seg) } #endif if (qout->segcnt > 6) { - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto out_free; } @@ -324,11 +324,11 @@ query_segment_type (struct dcss_segment *seg) for (i=0; i<qout->segcnt; i++) { if (((qout->range[i].start & 0xff) != SEG_TYPE_EW) && ((qout->range[i].start & 0xff) != SEG_TYPE_EN)) { - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto out_free; } if (start != qout->range[i].start >> PAGE_SHIFT) { - rc = -ENOTSUPP; + rc = -EOPNOTSUPP; goto out_free; } start = (qout->range[i].end >> PAGE_SHIFT) + 1; @@ -357,7 +357,7 @@ query_segment_type (struct dcss_segment *seg) * -ENOSYS : we are not running on VM * -EIO : could not perform query diagnose * -ENOENT : no such segment - * -ENOTSUPP: multi-part segment cannot be used with linux + * -EOPNOTSUPP: multi-part segment cannot be used with linux * -ENOMEM : out of memory * 0 .. 6 : type of segment as defined in include/asm-s390/extmem.h */ @@ -515,7 +515,7 @@ __segment_load (char *name, int do_nonshared, unsigned long *addr, unsigned long * -ENOSYS : we are not running on VM * -EIO : could not perform query or load diagnose * -ENOENT : no such segment - * -ENOTSUPP: multi-part segment cannot be used with linux + * -EOPNOTSUPP: multi-part segment cannot be used with linux * -ENOSPC : segment cannot be used (overlaps with storage) * -EBUSY : segment can temporarily not be used (overlaps with dcss) * -ERANGE : segment cannot be used (exceeds kernel mapping range) @@ -742,7 +742,7 @@ void segment_warning(int rc, char *seg_name) pr_err("Loading or querying DCSS %s resulted in a " "hardware error\n", seg_name); break; - case -ENOTSUPP: + case -EOPNOTSUPP: pr_err("DCSS %s has multiple page ranges and cannot be " "loaded or queried\n", seg_name); break; diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index fc102e70d9c..3040d7c78fe 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -30,6 +30,7 @@ #include <linux/kprobes.h> #include <linux/uaccess.h> #include <linux/hugetlb.h> +#include <asm/asm-offsets.h> #include <asm/system.h> #include <asm/pgtable.h> #include <asm/s390_ext.h> @@ -59,15 +60,13 @@ static inline int notify_page_fault(struct pt_regs *regs) { int ret = 0; -#ifdef CONFIG_KPROBES /* kprobe_running() needs smp_processor_id() */ - if (!user_mode(regs)) { + if (kprobes_built_in() && !user_mode(regs)) { preempt_disable(); if (kprobe_running() && kprobe_fault_handler(regs, 14)) ret = 1; preempt_enable(); } -#endif return ret; } diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 76564795222..d5865e4024c 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -143,33 +143,34 @@ void kernel_map_pages(struct page *page, int numpages, int enable) } #endif -void free_initmem(void) +void free_init_pages(char *what, unsigned long begin, unsigned long end) { - unsigned long addr; + unsigned long addr = begin; - addr = (unsigned long)(&__init_begin); - for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { + if (begin >= end) + return; + for (; addr < end; addr += PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); - memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); + memset((void *)(addr & PAGE_MASK), POISON_FREE_INITMEM, + PAGE_SIZE); free_page(addr); totalram_pages++; - } - printk ("Freeing unused kernel memory: %ldk freed\n", - ((unsigned long)&__init_end - (unsigned long)&__init_begin) >> 10); + } + printk(KERN_INFO "Freeing %s: %luk freed\n", what, (end - begin) >> 10); +} + +void free_initmem(void) +{ + free_init_pages("unused kernel memory", + (unsigned long)&__init_begin, + (unsigned long)&__init_end); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { - if (start < end) - printk ("Freeing initrd memory: %ldk freed\n", (end - start) >> 10); - for (; start < end; start += PAGE_SIZE) { - ClearPageReserved(virt_to_page(start)); - init_page_count(virt_to_page(start)); - free_page(start); - totalram_pages++; - } + free_init_pages("initrd memory", start, end); } #endif |