diff options
Diffstat (limited to 'arch')
24 files changed, 351 insertions, 133 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 3414e230182..482dcc3b91e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -174,30 +174,15 @@ config LASAT select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_LITTLE_ENDIAN -config LEMOTE_FULOONG2E - bool "Lemote Fuloong2e mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2 - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HAVE_STD_PC_SERIAL_PORT - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB +config MACH_LOONGSON + bool "Loongson family of machines" help - Lemote Fuloong2e mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge + This enables the support of Loongson family of machines. + + Loongson is a family of general-purpose MIPS-compatible CPUs. + developed at Institute of Computing Technology (ICT), + Chinese Academy of Sciences (CAS) in the People's Republic + of China. The chief architect is Professor Weiwu Hu. config MIPS_MALTA bool "MIPS Malta board" @@ -668,6 +653,7 @@ source "arch/mips/sibyte/Kconfig" source "arch/mips/txx9/Kconfig" source "arch/mips/vr41xx/Kconfig" source "arch/mips/cavium-octeon/Kconfig" +source "arch/mips/loongson/Kconfig" endmenu diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 7754cbbbf4e..94d6f581386 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -314,11 +314,12 @@ cflags-$(CONFIG_WR_PPMC) += -I$(srctree)/arch/mips/include/asm/mach-wrppmc load-$(CONFIG_WR_PPMC) += 0xffffffff80100000 # -# lemote fuloong2e mini-PC board +# Loongson family # -core-$(CONFIG_LEMOTE_FULOONG2E) +=arch/mips/loongson/fuloong-2e/ +core-$(CONFIG_MACH_LOONGSON) +=arch/mips/loongson/ +cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson \ + -mno-branch-likely load-$(CONFIG_LEMOTE_FULOONG2E) +=0xffffffff80100000 -cflags-$(CONFIG_LEMOTE_FULOONG2E) += -I$(srctree)/arch/mips/include/asm/mach-loongson/ # # MIPS Malta board diff --git a/arch/mips/include/asm/mach-loongson/loongson.h b/arch/mips/include/asm/mach-loongson/loongson.h index e9f74dee24e..da70bcf2304 100644 --- a/arch/mips/include/asm/mach-loongson/loongson.h +++ b/arch/mips/include/asm/mach-loongson/loongson.h @@ -21,6 +21,10 @@ /* loongson internal northbridge initialization */ extern void bonito_irq_init(void); +/* machine-specific reboot/halt operation */ +extern void mach_prepare_reboot(void); +extern void mach_prepare_shutdown(void); + /* environment arguments from bootloader */ extern unsigned long bus_clock, cpu_clock_freq; extern unsigned long memsize, highmemsize; @@ -30,6 +34,13 @@ extern void __init prom_init_memory(void); extern void __init prom_init_cmdline(void); extern void __init prom_init_env(void); +/* irq operation functions */ +extern void bonito_irqdispatch(void); +extern void __init bonito_irq_init(void); +extern void __init set_irq_trigger_mode(void); +extern void __init mach_init_irq(void); +extern void mach_irq_dispatch(unsigned int pending); + /* PCI Configuration Registers */ #define LOONGSON_PCI_ISR4C BONITO_PCI_REG(0x4c) diff --git a/arch/mips/include/asm/mach-loongson/machine.h b/arch/mips/include/asm/mach-loongson/machine.h new file mode 100644 index 00000000000..8e60d363594 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/machine.h @@ -0,0 +1,22 @@ +/* + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON_MACHINE_H +#define __ASM_MACH_LOONGSON_MACHINE_H + +#ifdef CONFIG_LEMOTE_FULOONG2E + +#define LOONGSON_UART_BASE (BONITO_PCIIO_BASE + 0x3f8) + +#define LOONGSON_MACHNAME "lemote-fuloong-2e-box" + +#endif + +#endif /* __ASM_MACH_LOONGSON_MACHINE_H */ diff --git a/arch/mips/include/asm/mach-loongson/mem.h b/arch/mips/include/asm/mach-loongson/mem.h new file mode 100644 index 00000000000..bd7b3cba7e3 --- /dev/null +++ b/arch/mips/include/asm/mach-loongson/mem.h @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Wu Zhangjin <wuzj@lemote.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __ASM_MACH_LOONGSON_MEM_H +#define __ASM_MACH_LOONGSON_MEM_H + +/* + * On Lemote Loongson 2e + * + * the high memory space starts from 512M. + * the peripheral registers reside between 0x1000:0000 and 0x2000:0000. + */ + +#ifdef CONFIG_LEMOTE_FULOONG2E + +#define LOONGSON_HIGHMEM_START 0x20000000 + +#define LOONGSON_MMIO_MEM_START 0x10000000 +#define LOONGSON_MMIO_MEM_END 0x20000000 + +#endif + +#endif /* __ASM_MACH_LOONGSON_MEM_H */ diff --git a/arch/mips/include/asm/mach-loongson/pci.h b/arch/mips/include/asm/mach-loongson/pci.h index e229b2904cc..f1663ca81da 100644 --- a/arch/mips/include/asm/mach-loongson/pci.h +++ b/arch/mips/include/asm/mach-loongson/pci.h @@ -24,8 +24,14 @@ extern struct pci_ops bonito64_pci_ops; -#define LOONGSON2E_PCI_MEM_START BONITO_PCILO1_BASE -#define LOONGSON2E_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) -#define LOONGSON2E_PCI_IO_START 0x00004000UL +#ifdef CONFIG_LEMOTE_FULOONG2E + +/* this pci memory space is mapped by pcimap in pci.c */ +#define LOONGSON_PCI_MEM_START BONITO_PCILO1_BASE +#define LOONGSON_PCI_MEM_END (BONITO_PCILO1_BASE + 0x04000000 * 2) +/* this is an offset from mips_io_port_base */ +#define LOONGSON_PCI_IO_START 0x00004000UL + +#endif #endif /* !__ASM_MACH_LOONGSON_PCI_H_ */ diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig new file mode 100644 index 00000000000..376712a0e2f --- /dev/null +++ b/arch/mips/loongson/Kconfig @@ -0,0 +1,31 @@ +choice + prompt "Machine Type" + depends on MACH_LOONGSON + +config LEMOTE_FULOONG2E + bool "Lemote Fuloong(2e) mini-PC" + select ARCH_SPARSEMEM_ENABLE + select CEVT_R4K + select CSRC_R4K + select SYS_HAS_CPU_LOONGSON2 + select DMA_NONCOHERENT + select BOOT_ELF32 + select BOARD_SCACHE + select HW_HAS_PCI + select I8259 + select ISA + select IRQ_CPU + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + select SYS_SUPPORTS_HIGHMEM + select SYS_HAS_EARLY_PRINTK + select GENERIC_HARDIRQS_NO__DO_IRQ + select GENERIC_ISA_DMA_SUPPORT_BROKEN + select CPU_HAS_WB + help + Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and + an FPGA northbridge + + Lemote Fuloong(2e) mini PC have a VIA686B south bridge. +endchoice diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile new file mode 100644 index 00000000000..39048c455d7 --- /dev/null +++ b/arch/mips/loongson/Makefile @@ -0,0 +1,11 @@ +# +# Common code for all Loongson based systems +# + +obj-$(CONFIG_MACH_LOONGSON) += common/ + +# +# Lemote Fuloong mini-PC (Loongson 2E-based) +# + +obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/ diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile new file mode 100644 index 00000000000..4e3889dec39 --- /dev/null +++ b/arch/mips/loongson/common/Makefile @@ -0,0 +1,11 @@ +# +# Makefile for loongson based machines. +# + +obj-y += setup.o init.o cmdline.o env.o time.o reset.o irq.o \ + pci.o bonito-irq.o mem.o + +# +# Early printk support +# +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/mips/loongson/fuloong-2e/bonito-irq.c b/arch/mips/loongson/common/bonito-irq.c index 3e31e7ad713..3e31e7ad713 100644 --- a/arch/mips/loongson/fuloong-2e/bonito-irq.c +++ b/arch/mips/loongson/common/bonito-irq.c diff --git a/arch/mips/loongson/fuloong-2e/cmdline.c b/arch/mips/loongson/common/cmdline.c index 75f1b243ee4..75f1b243ee4 100644 --- a/arch/mips/loongson/fuloong-2e/cmdline.c +++ b/arch/mips/loongson/common/cmdline.c diff --git a/arch/mips/loongson/fuloong-2e/early_printk.c b/arch/mips/loongson/common/early_printk.c index 3e0a6eaa404..bc73edc0cfd 100644 --- a/arch/mips/loongson/fuloong-2e/early_printk.c +++ b/arch/mips/loongson/common/early_printk.c @@ -12,8 +12,7 @@ #include <linux/serial_reg.h> #include <loongson.h> - -#define UART_BASE (BONITO_PCIIO_BASE + 0x3f8) +#include <machine.h> #define PORT(base, offset) (u8 *)(base + offset) @@ -30,7 +29,7 @@ static inline void serial_out(phys_addr_t base, int offset, int value) void prom_putchar(char c) { phys_addr_t uart_base = - (phys_addr_t) ioremap_nocache(UART_BASE, 8); + (phys_addr_t) ioremap_nocache(LOONGSON_UART_BASE, 8); while ((serial_in(uart_base, UART_LSR) & UART_LSR_THRE) == 0) ; diff --git a/arch/mips/loongson/fuloong-2e/env.c b/arch/mips/loongson/common/env.c index b9ef5038554..b9ef5038554 100644 --- a/arch/mips/loongson/fuloong-2e/env.c +++ b/arch/mips/loongson/common/env.c diff --git a/arch/mips/loongson/fuloong-2e/init.c b/arch/mips/loongson/common/init.c index 3abe927422a..3abe927422a 100644 --- a/arch/mips/loongson/fuloong-2e/init.c +++ b/arch/mips/loongson/common/init.c diff --git a/arch/mips/loongson/common/irq.c b/arch/mips/loongson/common/irq.c new file mode 100644 index 00000000000..f368c735cbd --- /dev/null +++ b/arch/mips/loongson/common/irq.c @@ -0,0 +1,74 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/delay.h> +#include <linux/interrupt.h> + +#include <loongson.h> +/* + * the first level int-handler will jump here if it is a bonito irq + */ +void bonito_irqdispatch(void) +{ + u32 int_status; + int i; + + /* workaround the IO dma problem: let cpu looping to allow DMA finish */ + int_status = BONITO_INTISR; + if (int_status & (1 << 10)) { + while (int_status & (1 << 10)) { + udelay(1); + int_status = BONITO_INTISR; + } + } + + /* Get pending sources, masked by current enables */ + int_status = BONITO_INTISR & BONITO_INTEN; + + if (int_status != 0) { + i = __ffs(int_status); + int_status &= ~(1 << i); + do_IRQ(BONITO_IRQ_BASE + i); + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + unsigned int pending; + + pending = read_c0_cause() & read_c0_status() & ST0_IM; + + /* machine-specific plat_irq_dispatch */ + mach_irq_dispatch(pending); +} + +void __init arch_init_irq(void) +{ + /* + * Clear all of the interrupts while we change the able around a bit. + * int-handler is not on bootstrap + */ + clear_c0_status(ST0_IM | ST0_BEV); + local_irq_disable(); + + /* setting irq trigger mode */ + set_irq_trigger_mode(); + + /* no steer */ + BONITO_INTSTEER = 0; + + /* + * Mask out all interrupt by writing "1" to all bit position in + * the interrupt reset reg. + */ + BONITO_INTENCLR = ~0; + + /* machine specific irq init */ + mach_init_irq(); +} diff --git a/arch/mips/loongson/fuloong-2e/machtype.c b/arch/mips/loongson/common/machtype.c index e03aa0de617..845b3fb47e0 100644 --- a/arch/mips/loongson/fuloong-2e/machtype.c +++ b/arch/mips/loongson/common/machtype.c @@ -8,8 +8,10 @@ * option) any later version. */ +#include <machine.h> + const char *get_system_type(void) { - return "lemote-fuloong-2e-box"; + return LOONGSON_MACHNAME; } diff --git a/arch/mips/loongson/fuloong-2e/mem.c b/arch/mips/loongson/common/mem.c index 6a7feb178fa..7c92f79b648 100644 --- a/arch/mips/loongson/fuloong-2e/mem.c +++ b/arch/mips/loongson/common/mem.c @@ -11,13 +11,15 @@ #include <asm/bootinfo.h> #include <loongson.h> +#include <mem.h> void __init prom_init_memory(void) { add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM); #ifdef CONFIG_64BIT if (highmemsize > 0) - add_memory_region(0x20000000, highmemsize << 20, BOOT_MEM_RAM); + add_memory_region(LOONGSON_HIGHMEM_START, + highmemsize << 20, BOOT_MEM_RAM); #endif /* CONFIG_64BIT */ } @@ -27,10 +29,7 @@ int __uncached_access(struct file *file, unsigned long addr) if (file->f_flags & O_SYNC) return 1; - /* - * On the Lemote Loongson 2e system, the peripheral registers - * reside between 0x1000:0000 and 0x2000:0000. - */ return addr >= __pa(high_memory) || - ((addr >= 0x10000000) && (addr < 0x20000000)); + ((addr >= LOONGSON_MMIO_MEM_START) && + (addr < LOONGSON_MMIO_MEM_END)); } diff --git a/arch/mips/loongson/fuloong-2e/pci.c b/arch/mips/loongson/common/pci.c index 9812c30cc6e..a3a4abfb6c9 100644 --- a/arch/mips/loongson/fuloong-2e/pci.c +++ b/arch/mips/loongson/common/pci.c @@ -12,24 +12,24 @@ #include <pci.h> #include <loongson.h> -static struct resource loongson2e_pci_mem_resource = { - .name = "LOONGSON2E PCI MEM", - .start = LOONGSON2E_PCI_MEM_START, - .end = LOONGSON2E_PCI_MEM_END, +static struct resource loongson_pci_mem_resource = { + .name = "pci memory space", + .start = LOONGSON_PCI_MEM_START, + .end = LOONGSON_PCI_MEM_END, .flags = IORESOURCE_MEM, }; -static struct resource loongson2e_pci_io_resource = { - .name = "LOONGSON2E PCI IO MEM", - .start = LOONGSON2E_PCI_IO_START, +static struct resource loongson_pci_io_resource = { + .name = "pci io space", + .start = LOONGSON_PCI_IO_START, .end = IO_SPACE_LIMIT, .flags = IORESOURCE_IO, }; -static struct pci_controller loongson2e_pci_controller = { +static struct pci_controller loongson_pci_controller = { .pci_ops = &bonito64_pci_ops, - .io_resource = &loongson2e_pci_io_resource, - .mem_resource = &loongson2e_pci_mem_resource, + .io_resource = &loongson_pci_io_resource, + .mem_resource = &loongson_pci_mem_resource, .mem_offset = 0x00000000UL, .io_offset = 0x00000000UL, }; @@ -73,9 +73,9 @@ static int __init pcibios_init(void) { setup_pcimap(); - loongson2e_pci_controller.io_map_base = mips_io_port_base; + loongson_pci_controller.io_map_base = mips_io_port_base; - register_pci_controller(&loongson2e_pci_controller); + register_pci_controller(&loongson_pci_controller); return 0; } diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c new file mode 100644 index 00000000000..97e918251ed --- /dev/null +++ b/arch/mips/loongson/common/reset.c @@ -0,0 +1,44 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology + * Author: Zhangjin Wu, wuzj@lemote.com + */ +#include <linux/init.h> +#include <linux/pm.h> + +#include <asm/reboot.h> + +#include <loongson.h> + +static void loongson_restart(char *command) +{ + /* do preparation for reboot */ + mach_prepare_reboot(); + + /* reboot via jumping to boot base address */ + ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); +} + +static void loongson_halt(void) +{ + mach_prepare_shutdown(); + while (1) + ; +} + +static int __init mips_reboot_setup(void) +{ + _machine_restart = loongson_restart; + _machine_halt = loongson_halt; + pm_power_off = loongson_halt; + + return 0; +} + +arch_initcall(mips_reboot_setup); diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c new file mode 100644 index 00000000000..4cd2aa9a342 --- /dev/null +++ b/arch/mips/loongson/common/setup.c @@ -0,0 +1,58 @@ +/* + * Copyright (C) 2007 Lemote Inc. & Insititute of Computing Technology + * Author: Fuxin Zhang, zhangfx@lemote.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/module.h> + +#include <asm/wbflush.h> + +#include <loongson.h> + +#ifdef CONFIG_VT +#include <linux/console.h> +#include <linux/screen_info.h> +#endif + +void (*__wbflush)(void); +EXPORT_SYMBOL(__wbflush); + +static void wbflush_loongson(void) +{ + asm(".set\tpush\n\t" + ".set\tnoreorder\n\t" + ".set mips3\n\t" + "sync\n\t" + "nop\n\t" + ".set\tpop\n\t" + ".set mips0\n\t"); +} + +void __init plat_mem_setup(void) +{ + __wbflush = wbflush_loongson; + +#ifdef CONFIG_VT +#if defined(CONFIG_VGA_CONSOLE) + conswitchp = &vga_con; + + screen_info = (struct screen_info) { + 0, 25, /* orig-x, orig-y */ + 0, /* unused */ + 0, /* orig-video-page */ + 0, /* orig-video-mode */ + 80, /* orig-video-cols */ + 0, 0, 0, /* ega_ax, ega_bx, ega_cx */ + 25, /* orig-video-lines */ + VIDEO_TYPE_VGAC, /* orig-video-isVGA */ + 16 /* orig-video-points */ + }; +#elif defined(CONFIG_DUMMY_CONSOLE) + conswitchp = &dummy_con; +#endif +#endif +} diff --git a/arch/mips/loongson/fuloong-2e/time.c b/arch/mips/loongson/common/time.c index b13d1717465..b13d1717465 100644 --- a/arch/mips/loongson/fuloong-2e/time.c +++ b/arch/mips/loongson/common/time.c diff --git a/arch/mips/loongson/fuloong-2e/Makefile b/arch/mips/loongson/fuloong-2e/Makefile index feb1d6bba49..96e45c13c85 100644 --- a/arch/mips/loongson/fuloong-2e/Makefile +++ b/arch/mips/loongson/fuloong-2e/Makefile @@ -2,12 +2,6 @@ # Makefile for Lemote Fuloong2e mini-PC board. # -obj-y += setup.o init.o reset.o irq.o pci.o bonito-irq.o mem.o \ - env.o cmdline.o time.o machtype.o - -# -# Early printk support -# -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-y += irq.o reset.o machtype.o EXTRA_CFLAGS += -Werror diff --git a/arch/mips/loongson/fuloong-2e/irq.c b/arch/mips/loongson/fuloong-2e/irq.c index 9585f5aa7cc..7888cf69424 100644 --- a/arch/mips/loongson/fuloong-2e/irq.c +++ b/arch/mips/loongson/fuloong-2e/irq.c @@ -7,39 +7,12 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ -#include <linux/delay.h> #include <linux/interrupt.h> #include <asm/irq_cpu.h> #include <asm/i8259.h> #include <loongson.h> -/* - * the first level int-handler will jump here if it is a bonito irq - */ -static void bonito_irqdispatch(void) -{ - u32 int_status; - int i; - - /* workaround the IO dma problem: let cpu looping to allow DMA finish */ - int_status = BONITO_INTISR; - if (int_status & (1 << 10)) { - while (int_status & (1 << 10)) { - udelay(1); - int_status = BONITO_INTISR; - } - } - - /* Get pending sources, masked by current enables */ - int_status = BONITO_INTISR & BONITO_INTEN; - - if (int_status != 0) { - i = __ffs(int_status); - int_status &= ~(1 << i); - do_IRQ(BONITO_IRQ_BASE + i); - } -} static void i8259_irqdispatch(void) { @@ -52,10 +25,8 @@ static void i8259_irqdispatch(void) spurious_interrupt(); } -asmlinkage void plat_irq_dispatch(void) +asmlinkage void mach_irq_dispatch(unsigned int pending) { - unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; - if (pending & CAUSEF_IP7) do_IRQ(MIPS_CPU_IRQ_BASE + 7); else if (pending & CAUSEF_IP6) /* perf counter loverflow */ @@ -73,26 +44,15 @@ static struct irqaction cascade_irqaction = { .name = "cascade", }; -void __init arch_init_irq(void) +void __init set_irq_trigger_mode(void) { - /* - * Clear all of the interrupts while we change the able around a bit. - * int-handler is not on bootstrap - */ - clear_c0_status(ST0_IM | ST0_BEV); - local_irq_disable(); - /* most bonito irq should be level triggered */ BONITO_INTEDGE = BONITO_ICU_SYSTEMERR | BONITO_ICU_MASTERERR | - BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; - BONITO_INTSTEER = 0; - - /* - * Mask out all interrupt by writing "1" to all bit position in - * the interrupt reset reg. - */ - BONITO_INTENCLR = ~0; + BONITO_ICU_RETRYERR | BONITO_ICU_MBOXES; +} +void __init mach_init_irq(void) +{ /* init all controller * 0-15 ------> i8259 interrupt * 16-23 ------> mips cpu interrupt diff --git a/arch/mips/loongson/fuloong-2e/reset.c b/arch/mips/loongson/fuloong-2e/reset.c index c21299af7f6..677fe186db9 100644 --- a/arch/mips/loongson/fuloong-2e/reset.c +++ b/arch/mips/loongson/fuloong-2e/reset.c @@ -1,44 +1,23 @@ -/* +/* Board-specific reboot/shutdown routines + * Copyright (c) 2009 Philippe Vachon <philippe@cowpig.ca> + * + * Copyright (C) 2009 Lemote Inc. & Insititute of Computing Technology + * Author: Wu Zhangjin, wuzj@lemote.com + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. - * - * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology - * Author: Fuxin Zhang, zhangfx@lemote.com - * Copyright (C) 2009 Lemote, Inc. & Institute of Computing Technology - * Author: Zhangjin Wu, wuzj@lemote.com */ -#include <linux/init.h> -#include <linux/pm.h> - -#include <asm/reboot.h> #include <loongson.h> -static void loongson2e_restart(char *command) +void mach_prepare_reboot(void) { - /* do preparation for reboot */ BONITO_BONGENCFG &= ~(1 << 2); BONITO_BONGENCFG |= (1 << 2); - - /* reboot via jumping to boot base address */ - ((void (*)(void))ioremap_nocache(BONITO_BOOT_BASE, 4)) (); } -static void loongson2e_halt(void) +void mach_prepare_shutdown(void) { - while (1) - ; } - -static int __init mips_reboot_setup(void) -{ - _machine_restart = loongson2e_restart; - _machine_halt = loongson2e_halt; - pm_power_off = loongson2e_halt; - - return 0; -} - -arch_initcall(mips_reboot_setup); |