aboutsummaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/kernel/head.S38
-rw-r--r--arch/arm/kernel/hw_breakpoint.c44
-rw-r--r--arch/arm/kernel/module.c22
-rw-r--r--arch/arm/kernel/perf_event.c2
-rw-r--r--arch/arm/mach-pxa/colibri-evalboard.c2
-rw-r--r--arch/arm/mach-pxa/colibri-pxa300.c2
-rw-r--r--arch/arm/mach-pxa/include/mach/colibri.h2
-rw-r--r--arch/arm/mach-pxa/palm27x.c2
-rw-r--r--arch/arm/mach-pxa/pm.c4
-rw-r--r--arch/arm/mach-s5pv310/Kconfig1
-rw-r--r--arch/arm/mach-s5pv310/include/mach/map.h2
-rw-r--r--arch/arm/mach-s5pv310/include/mach/sysmmu.h5
-rw-r--r--arch/arm/mach-sa1100/collie.c3
-rw-r--r--arch/arm/mm/Kconfig6
-rw-r--r--arch/arm/oprofile/common.c14
-rw-r--r--arch/arm/plat-pxa/mfp.c8
-rw-r--r--arch/arm/plat-s5p/Kconfig24
-rw-r--r--arch/arm/plat-s5p/Makefile2
-rw-r--r--arch/arm/plat-s5p/include/plat/sysmmu.h23
-rw-r--r--arch/arm/plat-s5p/sysmmu.c4
-rw-r--r--arch/arm/plat-samsung/include/plat/pm.h2
-rw-r--r--arch/blackfin/include/asm/bfin_serial.h2
-rw-r--r--arch/microblaze/include/asm/irqflags.h2
-rw-r--r--arch/microblaze/include/asm/pgtable.h27
-rw-r--r--arch/microblaze/kernel/cpu/pvr.c4
-rw-r--r--arch/microblaze/kernel/head.S15
-rw-r--r--arch/microblaze/kernel/setup.c4
-rw-r--r--arch/s390/include/asm/processor.h5
-rw-r--r--arch/s390/kernel/traps.c37
-rw-r--r--arch/x86/include/asm/apic.h1
-rw-r--r--arch/x86/include/asm/cpu.h2
-rw-r--r--arch/x86/kernel/alternative.c2
-rw-r--r--arch/x86/kernel/apic/apic.c9
-rw-r--r--arch/x86/kernel/apic/io_apic.c3
-rw-r--r--arch/x86/kernel/irq.c3
-rw-r--r--arch/x86/kernel/process.c24
-rw-r--r--arch/x86/kernel/smpboot.c4
-rw-r--r--arch/x86/kvm/svm.c2
39 files changed, 175 insertions, 185 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 5cff165b7eb..26d45e5b636 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1391,7 +1391,7 @@ config AEABI
config OABI_COMPAT
bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
- depends on AEABI && EXPERIMENTAL
+ depends on AEABI && EXPERIMENTAL && !THUMB2_KERNEL
default y
help
This option preserves the old syscall interface along with the
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index c0225da3fb2..f06ff9feb0d 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -391,6 +391,7 @@ ENDPROC(__turn_mmu_on)
#ifdef CONFIG_SMP_ON_UP
+ __INIT
__fixup_smp:
and r3, r9, #0x000f0000 @ architecture version
teq r3, #0x000f0000 @ CPU ID supported?
@@ -415,18 +416,7 @@ __fixup_smp_on_up:
sub r3, r0, r3
add r4, r4, r3
add r5, r5, r3
-2: cmp r4, r5
- movhs pc, lr
- ldmia r4!, {r0, r6}
- ARM( str r6, [r0, r3] )
- THUMB( add r0, r0, r3 )
-#ifdef __ARMEB__
- THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
-#endif
- THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
- THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
- THUMB( strh r6, [r0] )
- b 2b
+ b __do_fixup_smp_on_up
ENDPROC(__fixup_smp)
.align
@@ -440,7 +430,31 @@ smp_on_up:
ALT_SMP(.long 1)
ALT_UP(.long 0)
.popsection
+#endif
+ .text
+__do_fixup_smp_on_up:
+ cmp r4, r5
+ movhs pc, lr
+ ldmia r4!, {r0, r6}
+ ARM( str r6, [r0, r3] )
+ THUMB( add r0, r0, r3 )
+#ifdef __ARMEB__
+ THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
#endif
+ THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
+ THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
+ THUMB( strh r6, [r0] )
+ b __do_fixup_smp_on_up
+ENDPROC(__do_fixup_smp_on_up)
+
+ENTRY(fixup_smp)
+ stmfd sp!, {r4 - r6, lr}
+ mov r4, r0
+ add r5, r0, r1
+ mov r3, #0
+ bl __do_fixup_smp_on_up
+ ldmfd sp!, {r4 - r6, pc}
+ENDPROC(fixup_smp)
#include "head-common.S"
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index c9f3f046757..d600bd35070 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -137,11 +137,10 @@ static u8 get_debug_arch(void)
u32 didr;
/* Do we implement the extended CPUID interface? */
- if (((read_cpuid_id() >> 16) & 0xf) != 0xf) {
- pr_warning("CPUID feature registers not supported. "
- "Assuming v6 debug is present.\n");
+ if (WARN_ONCE((((read_cpuid_id() >> 16) & 0xf) != 0xf),
+ "CPUID feature registers not supported. "
+ "Assuming v6 debug is present.\n"))
return ARM_DEBUG_ARCH_V6;
- }
ARM_DBG_READ(c0, 0, didr);
return (didr >> 16) & 0xf;
@@ -152,6 +151,12 @@ u8 arch_get_debug_arch(void)
return debug_arch;
}
+static int debug_arch_supported(void)
+{
+ u8 arch = get_debug_arch();
+ return arch >= ARM_DEBUG_ARCH_V6 && arch <= ARM_DEBUG_ARCH_V7_ECP14;
+}
+
/* Determine number of BRP register available. */
static int get_num_brp_resources(void)
{
@@ -268,6 +273,9 @@ out:
int hw_breakpoint_slots(int type)
{
+ if (!debug_arch_supported())
+ return 0;
+
/*
* We can be called early, so don't rely on
* our static variables being initialised.
@@ -834,11 +842,11 @@ static void reset_ctrl_regs(void *unused)
/*
* v7 debug contains save and restore registers so that debug state
- * can be maintained across low-power modes without leaving
- * the debug logic powered up. It is IMPLEMENTATION DEFINED whether
- * we can write to the debug registers out of reset, so we must
- * unlock the OS Lock Access Register to avoid taking undefined
- * instruction exceptions later on.
+ * can be maintained across low-power modes without leaving the debug
+ * logic powered up. It is IMPLEMENTATION DEFINED whether we can access
+ * the debug registers out of reset, so we must unlock the OS Lock
+ * Access Register to avoid taking undefined instruction exceptions
+ * later on.
*/
if (debug_arch >= ARM_DEBUG_ARCH_V7_ECP14) {
/*
@@ -882,7 +890,7 @@ static int __init arch_hw_breakpoint_init(void)
debug_arch = get_debug_arch();
- if (debug_arch > ARM_DEBUG_ARCH_V7_ECP14) {
+ if (!debug_arch_supported()) {
pr_info("debug architecture 0x%x unsupported.\n", debug_arch);
return 0;
}
@@ -899,18 +907,18 @@ static int __init arch_hw_breakpoint_init(void)
pr_info("%d breakpoint(s) reserved for watchpoint "
"single-step.\n", core_num_reserved_brps);
+ /*
+ * Reset the breakpoint resources. We assume that a halting
+ * debugger will leave the world in a nice state for us.
+ */
+ on_each_cpu(reset_ctrl_regs, NULL, 1);
+
ARM_DBG_READ(c1, 0, dscr);
if (dscr & ARM_DSCR_HDBGEN) {
+ max_watchpoint_len = 4;
pr_warning("halting debug mode enabled. Assuming maximum "
- "watchpoint size of 4 bytes.");
+ "watchpoint size of %u bytes.", max_watchpoint_len);
} else {
- /*
- * Reset the breakpoint resources. We assume that a halting
- * debugger will leave the world in a nice state for us.
- */
- smp_call_function(reset_ctrl_regs, NULL, 1);
- reset_ctrl_regs(NULL);
-
/* Work out the maximum supported watchpoint length. */
max_watchpoint_len = get_max_wp_len();
pr_info("maximum watchpoint size is %u bytes.\n",
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 2cfe8161b47..6d4105e6872 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -22,6 +22,7 @@
#include <asm/pgtable.h>
#include <asm/sections.h>
+#include <asm/smp_plat.h>
#include <asm/unwind.h>
#ifdef CONFIG_XIP_KERNEL
@@ -268,12 +269,28 @@ struct mod_unwind_map {
const Elf_Shdr *txt_sec;
};
+static const Elf_Shdr *find_mod_section(const Elf32_Ehdr *hdr,
+ const Elf_Shdr *sechdrs, const char *name)
+{
+ const Elf_Shdr *s, *se;
+ const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++)
+ if (strcmp(name, secstrs + s->sh_name) == 0)
+ return s;
+
+ return NULL;
+}
+
+extern void fixup_smp(const void *, unsigned long);
+
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
{
+ const Elf_Shdr * __maybe_unused s = NULL;
#ifdef CONFIG_ARM_UNWIND
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
- const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
+ const Elf_Shdr *sechdrs_end = sechdrs + hdr->e_shnum;
struct mod_unwind_map maps[ARM_SEC_MAX];
int i;
@@ -315,6 +332,9 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
maps[i].txt_sec->sh_addr,
maps[i].txt_sec->sh_size);
#endif
+ s = find_mod_section(hdr, sechdrs, ".alt.smp.init");
+ if (s && !is_smp())
+ fixup_smp((void *)s->sh_addr, s->sh_size);
return 0;
}
diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c
index 5efa2647a2f..d150ad1ccb5 100644
--- a/arch/arm/kernel/perf_event.c
+++ b/arch/arm/kernel/perf_event.c
@@ -700,7 +700,7 @@ user_backtrace(struct frame_tail __user *tail,
* Frame pointers should strictly progress back up the stack
* (towards higher addresses).
*/
- if (tail >= buftail.fp)
+ if (tail + 1 >= buftail.fp)
return NULL;
return buftail.fp - 1;
diff --git a/arch/arm/mach-pxa/colibri-evalboard.c b/arch/arm/mach-pxa/colibri-evalboard.c
index 6b2c800a113..28f667e52ef 100644
--- a/arch/arm/mach-pxa/colibri-evalboard.c
+++ b/arch/arm/mach-pxa/colibri-evalboard.c
@@ -50,7 +50,7 @@ static void __init colibri_mmc_init(void)
GPIO0_COLIBRI_PXA270_SD_DETECT;
if (machine_is_colibri300()) /* PXA300 Colibri */
colibri_mci_platform_data.gpio_card_detect =
- GPIO39_COLIBRI_PXA300_SD_DETECT;
+ GPIO13_COLIBRI_PXA300_SD_DETECT;
else /* PXA320 Colibri */
colibri_mci_platform_data.gpio_card_detect =
GPIO28_COLIBRI_PXA320_SD_DETECT;
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index fddb16d07eb..66dd81cbc8a 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -41,7 +41,7 @@ static mfp_cfg_t colibri_pxa300_evalboard_pin_config[] __initdata = {
GPIO4_MMC1_DAT1,
GPIO5_MMC1_DAT2,
GPIO6_MMC1_DAT3,
- GPIO39_GPIO, /* SD detect */
+ GPIO13_GPIO, /* GPIO13_COLIBRI_PXA300_SD_DETECT */
/* UHC */
GPIO0_2_USBH_PEN,
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
index 388a96f1ef9..cb4236e98a0 100644
--- a/arch/arm/mach-pxa/include/mach/colibri.h
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -60,7 +60,7 @@ static inline void colibri_pxa3xx_init_nand(void) {}
#define GPIO113_COLIBRI_PXA270_TS_IRQ 113
/* GPIO definitions for Colibri PXA300/310 */
-#define GPIO39_COLIBRI_PXA300_SD_DETECT 39
+#define GPIO13_COLIBRI_PXA300_SD_DETECT 13
/* GPIO definitions for Colibri PXA320 */
#define GPIO28_COLIBRI_PXA320_SD_DETECT 28
diff --git a/arch/arm/mach-pxa/palm27x.c b/arch/arm/mach-pxa/palm27x.c
index 405b92a2979..35572c427fa 100644
--- a/arch/arm/mach-pxa/palm27x.c
+++ b/arch/arm/mach-pxa/palm27x.c
@@ -323,7 +323,7 @@ static struct platform_pwm_backlight_data palm27x_backlight_data = {
.pwm_id = 0,
.max_brightness = 0xfe,
.dft_brightness = 0x7e,
- .pwm_period_ns = 3500,
+ .pwm_period_ns = 3500 * 1024,
.init = palm27x_backlight_init,
.notify = palm27x_backlight_notify,
.exit = palm27x_backlight_exit,
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 978e1b28954..1807c9abdde 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -33,7 +33,7 @@ int pxa_pm_enter(suspend_state_t state)
#endif
/* skip registers saving for standby */
- if (state != PM_SUSPEND_STANDBY) {
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->save) {
pxa_cpu_pm_fns->save(sleep_save);
/* before sleeping, calculate and save a checksum */
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
@@ -44,7 +44,7 @@ int pxa_pm_enter(suspend_state_t state)
pxa_cpu_pm_fns->enter(state);
cpu_init();
- if (state != PM_SUSPEND_STANDBY) {
+ if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) {
/* after sleeping, validate the checksum */
for (i = 0; i < pxa_cpu_pm_fns->save_count - 1; i++)
checksum += sleep_save[i];
diff --git a/arch/arm/mach-s5pv310/Kconfig b/arch/arm/mach-s5pv310/Kconfig
index 09c4c21b70c..b2a9acc5185 100644
--- a/arch/arm/mach-s5pv310/Kconfig
+++ b/arch/arm/mach-s5pv310/Kconfig
@@ -122,6 +122,7 @@ config MACH_SMDKV310
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S5PV310_DEV_PD
+ select S5PV310_DEV_SYSMMU
select S5PV310_SETUP_I2C1
select S5PV310_SETUP_SDHCI
help
diff --git a/arch/arm/mach-s5pv310/include/mach/map.h b/arch/arm/mach-s5pv310/include/mach/map.h
index 74d400625a2..3060f78e12a 100644
--- a/arch/arm/mach-s5pv310/include/mach/map.h
+++ b/arch/arm/mach-s5pv310/include/mach/map.h
@@ -124,8 +124,6 @@
#define S5PV310_PA_SYSMMU_TV 0x12E20000
#define S5PV310_PA_SYSMMU_MFC_L 0x13620000
#define S5PV310_PA_SYSMMU_MFC_R 0x13630000
-#define S5PV310_SYSMMU_TOTAL_IPNUM 16
-#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM
/* compatibiltiy defines. */
#define S3C_PA_UART S5PV310_PA_UART
diff --git a/arch/arm/mach-s5pv310/include/mach/sysmmu.h b/arch/arm/mach-s5pv310/include/mach/sysmmu.h
index 662fe85ff4d..598fc5c9211 100644
--- a/arch/arm/mach-s5pv310/include/mach/sysmmu.h
+++ b/arch/arm/mach-s5pv310/include/mach/sysmmu.h
@@ -13,6 +13,9 @@
#ifndef __ASM_ARM_ARCH_SYSMMU_H
#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
+#define S5PV310_SYSMMU_TOTAL_IPNUM 16
+#define S5P_SYSMMU_TOTAL_IPNUM S5PV310_SYSMMU_TOTAL_IPNUM
+
enum s5pv310_sysmmu_ips {
SYSMMU_MDMA,
SYSMMU_SSS,
@@ -32,7 +35,7 @@ enum s5pv310_sysmmu_ips {
SYSMMU_MFC_R,
};
-static char *sysmmu_ips_name[S5P_SYSMMU_TOTAL_IPNUM] = {
+static char *sysmmu_ips_name[S5PV310_SYSMMU_TOTAL_IPNUM] = {
"SYSMMU_MDMA" ,
"SYSMMU_SSS" ,
"SYSMMU_FIMC0" ,
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index d43c5ef58eb..bd3e1bfdd6a 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -241,6 +241,9 @@ static struct locomo_platform_data locomo_info = {
struct platform_device collie_locomo_device = {
.name = "locomo",
.id = 0,
+ .dev = {
+ .platform_data = &locomo_info,
+ },
.num_resources = ARRAY_SIZE(locomo_resources),
.resource = locomo_resources,
};
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9d30c6f804b..e4509bae8fc 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -405,7 +405,7 @@ config CPU_V6
config CPU_32v6K
bool "Support ARM V6K processor extensions" if !SMP
depends on CPU_V6 || CPU_V7
- default y if SMP && !(ARCH_MX3 || ARCH_OMAP2)
+ default y if SMP
help
Say Y here if your ARMv6 processor supports the 'K' extension.
This enables the kernel to use some instructions not present
@@ -416,7 +416,7 @@ config CPU_32v6K
# ARMv7
config CPU_V7
bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
- select CPU_32v6K if !ARCH_OMAP2
+ select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
select CPU_PABRT_V7
@@ -644,7 +644,7 @@ config ARM_THUMBEE
config SWP_EMULATE
bool "Emulate SWP/SWPB instructions"
- depends on CPU_V7 && !CPU_V6
+ depends on !CPU_USE_DOMAINS && CPU_V7 && !CPU_V6
select HAVE_PROC_CPU if PROC_FS
default y if SMP
help
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index 8aa974491df..c074e66ad22 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,8 +10,6 @@
*/
#include <linux/cpumask.h>
-#include <linux/err.h>
-#include <linux/errno.h>
#include <linux/init.h>
#include <linux/mutex.h>
#include <linux/oprofile.h>
@@ -46,6 +44,7 @@ char *op_name_from_perf_id(void)
return NULL;
}
}
+#endif
static int report_trace(struct stackframe *frame, void *d)
{
@@ -85,7 +84,7 @@ static struct frame_tail* user_backtrace(struct frame_tail *tail)
/* frame pointers should strictly progress back up the stack
* (towards higher addresses) */
- if (tail >= buftail[0].fp)
+ if (tail + 1 >= buftail[0].fp)
return NULL;
return buftail[0].fp-1;
@@ -111,6 +110,7 @@ static void arm_backtrace(struct pt_regs * const regs, unsigned int depth)
int __init oprofile_arch_init(struct oprofile_operations *ops)
{
+ /* provide backtrace support also in timer mode: */
ops->backtrace = arm_backtrace;
return oprofile_perf_init(ops);
@@ -120,11 +120,3 @@ void __exit oprofile_arch_exit(void)
{
oprofile_perf_exit();
}
-#else
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- pr_info("oprofile: hardware counters not available\n");
- return -ENODEV;
-}
-void __exit oprofile_arch_exit(void) {}
-#endif /* CONFIG_HW_PERF_EVENTS */
diff --git a/arch/arm/plat-pxa/mfp.c b/arch/arm/plat-pxa/mfp.c
index b77e018d36c..a9aa5ad3f4e 100644
--- a/arch/arm/plat-pxa/mfp.c
+++ b/arch/arm/plat-pxa/mfp.c
@@ -139,10 +139,11 @@ static const unsigned long mfpr_edge[] = {
#define mfp_configured(p) ((p)->config != -1)
/*
- * perform a read-back of any MFPR register to make sure the
+ * perform a read-back of any valid MFPR register to make sure the
* previous writings are finished
*/
-#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + 0)
+static unsigned long mfpr_off_readback;
+#define mfpr_sync() (void)__raw_readl(mfpr_mmio_base + mfpr_off_readback)
static inline void __mfp_config_run(struct mfp_pin *p)
{
@@ -248,6 +249,9 @@ void __init mfp_init_addr(struct mfp_addr_map *map)
spin_lock_irqsave(&mfp_spin_lock, flags);
+ /* mfp offset for readback */
+ mfpr_off_readback = map[0].offset;
+
for (p = map; p->start != MFP_PIN_INVALID; p++) {
offset = p->offset;
i = p->start;
diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig
index deb39951a22..557f8c507f6 100644
--- a/arch/arm/plat-s5p/Kconfig
+++ b/arch/arm/plat-s5p/Kconfig
@@ -37,6 +37,14 @@ config S5P_GPIO_INT
help
Common code for the GPIO interrupts (other than external interrupts.)
+comment "System MMU"
+
+config S5P_SYSTEM_MMU
+ bool "S5P SYSTEM MMU"
+ depends on ARCH_S5PV310
+ help
+ Say Y here if you want to enable System MMU
+
config S5P_DEV_FIMC0
bool
help
@@ -66,19 +74,3 @@ config S5P_DEV_CSIS1
bool
help
Compile in platform device definitions for MIPI-CSIS channel 1
-
-menuconfig S5P_SYSMMU
- bool "SYSMMU support"
- depends on ARCH_S5PV310
- help
- This is a System MMU driver for Samsung ARM based Soc.
-
-if S5P_SYSMMU
-
-config S5P_SYSMMU_DEBUG
- bool "Enables debug messages"
- depends on S5P_SYSMMU
- help
- This enables SYSMMU driver debug massages.
-
-endif
diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile
index 92efe1adcfd..4bd5cf90897 100644
--- a/arch/arm/plat-s5p/Makefile
+++ b/arch/arm/plat-s5p/Makefile
@@ -19,6 +19,7 @@ obj-y += clock.o
obj-y += irq.o
obj-$(CONFIG_S5P_EXT_INT) += irq-eint.o
obj-$(CONFIG_S5P_GPIO_INT) += irq-gpioint.o
+obj-$(CONFIG_S5P_SYSTEM_MMU) += sysmmu.o
obj-$(CONFIG_PM) += pm.o
obj-$(CONFIG_PM) += irq-pm.o
@@ -30,4 +31,3 @@ obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o
obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o
obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o
-obj-$(CONFIG_S5P_SYSMMU) += sysmmu.o
diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-s5p/include/plat/sysmmu.h
deleted file mode 100644
index db298fc5438..00000000000
--- a/arch/arm/plat-s5p/include/plat/sysmmu.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * Samsung sysmmu driver
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_PLAT_S5P_SYSMMU_H
-#define __ASM_PLAT_S5P_SYSMMU_H __FILE__
-
-/* debug macro */
-#ifdef CONFIG_S5P_SYSMMU_DEBUG
-#define sysmmu_debug(fmt, arg...) printk(KERN_INFO "[%s] " fmt, __func__, ## arg)
-#else
-#define sysmmu_debug(fmt, arg...) do { } while (0)
-#endif
-
-#endif /* __ASM_PLAT_S5P_SYSMMU_H */
diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c
index d804914dc2e..ffe8a48bc3c 100644
--- a/arch/arm/plat-s5p/sysmmu.c
+++ b/arch/arm/plat-s5p/sysmmu.c
@@ -16,8 +16,6 @@
#include <mach/regs-sysmmu.h>
#include <mach/sysmmu.h>
-#include <plat/sysmmu.h>
-
struct sysmmu_controller s5p_sysmmu_cntlrs[S5P_SYSMMU_TOTAL_IPNUM];
void s5p_sysmmu_register(struct sysmmu_controller *sysmmuconp)
@@ -123,7 +121,7 @@ static int s5p_sysmmu_set_tablebase(sysmmu_ips ips)
: "=r" (pg) : : "cc"); \
pg &= ~0x3fff;
- sysmmu_debug("CP15 TTBR0 : 0x%x\n", pg);
+ printk(KERN_INFO "%s: CP15 TTBR0 : 0x%x\n", __func__, pg);
/* Set sysmmu page table base address */
__raw_writel(pg, sysmmuconp->regs + S5P_PT_BASE_ADDR);
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index d9025e37767..30518cc9a67 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -17,6 +17,8 @@
#include <linux/irq.h>
+struct sys_device;
+
#ifdef CONFIG_PM
extern __init int s3c_pm_init(void);
diff --git a/arch/blackfin/include/asm/bfin_serial.h b/arch/blackfin/include/asm/bfin_serial.h
index 1ff9f1468c0..7dbc664eab1 100644
--- a/arch/blackfin/include/asm/bfin_serial.h
+++ b/arch/blackfin/include/asm/bfin_serial.h
@@ -10,6 +10,7 @@
#define __BFIN_ASM_SERIAL_H__
#include <linux/serial_core.h>
+#include <linux/spinlock.h>
#include <mach/anomaly.h>
#include <mach/bfin_serial.h>
@@ -41,6 +42,7 @@ struct bfin_serial_port {
struct circ_buf rx_dma_buf;
struct timer_list rx_dma_timer;
int rx_dma_nrows;
+ spinlock_t rx_lock;
unsigned int tx_dma_channel;
unsigned int rx_dma_channel;
struct work_struct tx_dma_workqueue;
diff --git a/arch/microblaze/include/asm/irqflags.h b/arch/microblaze/include/asm/irqflags.h
index 5fd31905775..c4532f032b3 100644
--- a/arch/microblaze/include/asm/irqflags.h
+++ b/arch/microblaze/include/asm/irqflags.h
@@ -12,7 +12,7 @@
#include <linux/types.h>
#include <asm/registers.h>
-#ifdef CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
+#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
static inline unsigned long arch_local_irq_save(void)
{
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index b23f6807587..885574a73f0 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -411,20 +411,19 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set)
{
- unsigned long old, tmp, msr;
-
- __asm__ __volatile__("\
- msrclr %2, 0x2\n\
- nop\n\
- lw %0, %4, r0\n\
- andn %1, %0, %5\n\
- or %1, %1, %6\n\
- sw %1, %4, r0\n\
- mts rmsr, %2\n\
- nop"
- : "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
- : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set), "m" (*p)
- : "cc");
+ unsigned long flags, old, tmp;
+
+ raw_local_irq_save(flags);
+
+ __asm__ __volatile__( "lw %0, %2, r0 \n"
+ "andn %1, %0, %3 \n"
+ "or %1, %1, %4 \n"
+ "sw %1, %2, r0 \n"
+ : "=&r" (old), "=&r" (tmp)
+ : "r" ((unsigned long)(p + 1) - 4), "r" (clr), "r" (set)
+ : "cc");
+
+ raw_local_irq_restore(flags);
return old;
}
diff --git a/arch/microblaze/kernel/cpu/pvr.c b/arch/microblaze/kernel/cpu/pvr.c
index e01afa68273..488c1ed24e3 100644
--- a/arch/microblaze/kernel/cpu/pvr.c
+++ b/arch/microblaze/kernel/cpu/pvr.c
@@ -27,7 +27,7 @@
register unsigned tmp __asm__("r3"); \
tmp = 0x0; /* Prevent warning about unused */ \
__asm__ __volatile__ ( \
- "mfs %0, rpvr" #pvrid ";" \
+ "mfs %0, rpvr" #pvrid ";" \
: "=r" (tmp) : : "memory"); \
val = tmp; \
}
@@ -54,7 +54,7 @@ int cpu_has_pvr(void)
if (!(flags & PVR_MSR_BIT))
return 0;
- get_single_pvr(0x00, pvr0);
+ get_single_pvr(0, pvr0);
pr_debug("%s: pvr0 is 0x%08x\n", __func__, pvr0);
if (pvr0 & PVR0_PVR_FULL_MASK)
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index 0db20b5abb5..778a5ce2e4f 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -62,15 +62,14 @@ real_start:
andi r1, r1, ~2
mts rmsr, r1
/*
- * Here is checking mechanism which check if Microblaze has msr instructions
- * We load msr and compare it with previous r1 value - if is the same,
- * msr instructions works if not - cpu don't have them.
+ * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc'
+ * if the msrclr instruction is not enabled. We use this to detect
+ * if the opcode is available, by issuing msrclr and then testing the result.
+ * r8 == 0 - msr instructions are implemented
+ * r8 != 0 - msr instructions are not implemented
*/
- /* r8=0 - I have msr instr, 1 - I don't have them */
- rsubi r0, r0, 1 /* set the carry bit */
- msrclr r0, 0x4 /* try to clear it */
- /* read the carry bit, r8 will be '0' if msrclr exists */
- addik r8, r0, 0
+ msrclr r8, 0 /* clear nothing - just read msr for test */
+ cmpu r8, r8, r1 /* r1 must contain msr reg content */
/* r7 may point to an FDT, or there may be one linked in.
if it's in r7, we've got to save it away ASAP.
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index bb1558e4b28..9312fbb37ef 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -161,11 +161,11 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
#if CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR
if (msr)
eprintk("!!!Your kernel has setup MSR instruction but "
- "CPU don't have it %d\n", msr);
+ "CPU don't have it %x\n", msr);
#else
if (!msr)
eprintk("!!!Your kernel not setup MSR instruction but "
- "CPU have it %d\n", msr);
+ "CPU have it %x\n", msr);
#endif
for (src = __ivt_start; src < __ivt_end; src++, dst++)
diff --git a/arch/s390/include/asm/processor.h b/arch/s390/include/asm/processor.h
index bf3de04170a..2c79b641627 100644
--- a/arch/s390/include/asm/processor.h
+++ b/arch/s390/include/asm/processor.h
@@ -148,11 +148,6 @@ extern int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags);
*/
extern unsigned long thread_saved_pc(struct task_struct *t);
-/*
- * Print register of task into buffer. Used in fs/proc/array.c.
- */
-extern void task_show_regs(struct seq_file *m, struct task_struct *task);
-
extern void show_code(struct pt_regs *regs);
unsigned long get_wchan(struct task_struct *p);
diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c
index 5eb78dd584c..b5a4a739b47 100644
--- a/arch/s390/kernel/traps.c
+++ b/arch/s390/kernel/traps.c
@@ -237,43 +237,6 @@ void show_regs(struct pt_regs *regs)
show_last_breaking_event(regs);
}
-/* This is called from fs/proc/array.c */
-void task_show_regs(struct seq_file *m, struct task_struct *task)
-{
- struct pt_regs *regs;
-
- regs = task_pt_regs(task);
- seq_printf(m, "task: %p, ksp: %p\n",
- task, (void *)task->thread.ksp);
- seq_printf(m, "User PSW : %p %p\n",
- (void *) regs->psw.mask, (void *)regs->psw.addr);
-
- seq_printf(m, "User GPRS: " FOURLONG,
- regs->gprs[0], regs->gprs[1],
- regs->gprs[2], regs->gprs[3]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[4], regs->gprs[5],
- regs->gprs[6], regs->gprs[7]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[8], regs->gprs[9],
- regs->gprs[10], regs->gprs[11]);
- seq_printf(m, " " FOURLONG,
- regs->gprs[12], regs->gprs[13],
- regs->gprs[14], regs->gprs[15]);
- seq_printf(m, "User ACRS: %08x %08x %08x %08x\n",
- task->thread.acrs[0], task->thread.acrs[1],
- task->thread.acrs[2], task->thread.acrs[3]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[4], task->thread.acrs[5],
- task->thread.acrs[6], task->thread.acrs[7]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[8], task->thread.acrs[9],
- task->thread.acrs[10], task->thread.acrs[11]);
- seq_printf(m, " %08x %08x %08x %08x\n",
- task->thread.acrs[12], task->thread.acrs[13],
- task->thread.acrs[14], task->thread.acrs[15]);
-}
-
static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 5e3969c36d7..3c896946f4c 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -233,6 +233,7 @@ extern void sync_Arb_IDs(void);
extern void init_bsp_APIC(void);
extern void setup_local_APIC(void);
extern void end_local_APIC_setup(void);
+extern void bsp_end_local_APIC_setup(void);
extern void init_apic_mappings(void);
void register_lapic_address(unsigned long address);
extern void setup_boot_APIC_clock(void);
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index 6e6e7558e70..4564c8e28a3 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -32,6 +32,6 @@ extern void arch_unregister_cpu(int);
DECLARE_PER_CPU(int, cpu_state);
-int __cpuinit mwait_usable(const struct cpuinfo_x86 *);
+int mwait_usable(const struct cpuinfo_x86 *);
#endif /* _ASM_X86_CPU_H */
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 123608531c8..7038b95d363 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -671,7 +671,7 @@ void __kprobes text_poke_smp_batch(struct text_poke_param *params, int n)
atomic_set(&stop_machine_first, 1);
wrote_text = 0;
- stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
+ __stop_machine(stop_machine_text_poke, (void *)&tpp, NULL);
}
#if defined(CONFIG_DYNAMIC_FTRACE) || defined(HAVE_JUMP_LABEL)
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index 06c196d7e59..76b96d74978 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -1381,12 +1381,17 @@ void __cpuinit end_local_APIC_setup(void)
#endif
apic_pm_activate();
+}
+
+void __init bsp_end_local_APIC_setup(void)
+{
+ end_local_APIC_setup();
/*
* Now that local APIC setup is completed for BP, configure the fault
* handling for interrupt remapping.
*/
- if (!smp_processor_id() && intr_remapping_enabled)
+ if (intr_remapping_enabled)
enable_drhd_fault_handling();
}
@@ -1756,7 +1761,7 @@ int __init APIC_init_uniprocessor(void)
enable_IO_APIC();
#endif
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
#ifdef CONFIG_X86_IO_APIC
if (smp_found_config && !skip_ioapic_setup && nr_ioapics)
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index 697dc34b7b8..ca9e2a3545a 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -4002,6 +4002,9 @@ int mp_find_ioapic(u32 gsi)
{
int i = 0;
+ if (nr_ioapics == 0)
+ return -1;
+
/* Find the IOAPIC that manages this GSI. */
for (i = 0; i < nr_ioapics; i++) {
if ((gsi >= mp_gsi_routing[i].gsi_base)
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 52945da52a9..387b6a0c9e8 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -367,7 +367,8 @@ void fixup_irqs(void)
if (irr & (1 << (vector % 32))) {
irq = __this_cpu_read(vector_irq[vector]);
- data = irq_get_irq_data(irq);
+ desc = irq_to_desc(irq);
+ data = &desc->irq_data;
raw_spin_lock(&desc->lock);
if (data->chip->irq_retrigger)
data->chip->irq_retrigger(data);
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index e764fc05d70..ff455419898 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -92,21 +92,31 @@ void show_regs(struct pt_regs *regs)
void show_regs_common(void)
{
- const char *board, *product;
+ const char *vendor, *product, *board;
- board = dmi_get_system_info(DMI_BOARD_NAME);
- if (!board)
- board = "";
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (!vendor)
+ vendor = "";
product = dmi_get_system_info(DMI_PRODUCT_NAME);
if (!product)
product = "";
+ /* Board Name is optional */
+ board = dmi_get_system_info(DMI_BOARD_NAME);
+
printk(KERN_CONT "\n");
- printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s %s/%s\n",
+ printk(KERN_DEFAULT "Pid: %d, comm: %.20s %s %s %.*s",
current->pid, current->comm, print_tainted(),
init_utsname()->release,
(int)strcspn(init_utsname()->version, " "),
- init_utsname()->version, board, product);
+ init_utsname()->version);
+ printk(KERN_CONT " ");
+ printk(KERN_CONT "%s %s", vendor, product);
+ if (board) {
+ printk(KERN_CONT "/");
+ printk(KERN_CONT "%s", board);
+ }
+ printk(KERN_CONT "\n");
}
void flush_thread(void)
@@ -506,7 +516,7 @@ static void poll_idle(void)
#define MWAIT_ECX_EXTENDED_INFO 0x01
#define MWAIT_EDX_C1 0xf0
-int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+int mwait_usable(const struct cpuinfo_x86 *c)
{
u32 eax, ebx, ecx, edx;
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 03273b6c272..08776a95348 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1060,7 +1060,7 @@ static int __init smp_sanity_check(unsigned max_cpus)
connect_bsp_APIC();
setup_local_APIC();
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
return -1;
}
@@ -1137,7 +1137,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
if (!skip_ioapic_setup && nr_ioapics)
enable_IO_APIC();
- end_local_APIC_setup();
+ bsp_end_local_APIC_setup();
map_cpu_to_logical_apicid();
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 25bd1bc5aad..54ce246a383 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -1150,8 +1150,8 @@ static void svm_vcpu_put(struct kvm_vcpu *vcpu)
kvm_load_ldt(svm->host.ldt);
#ifdef CONFIG_X86_64
loadsegment(fs, svm->host.fs);
- load_gs_index(svm->host.gs);
wrmsrl(MSR_KERNEL_GS_BASE, current->thread.gs);
+ load_gs_index(svm->host.gs);
#else
loadsegment(gs, svm->host.gs);
#endif