diff options
Diffstat (limited to 'arch')
28 files changed, 433 insertions, 146 deletions
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 0a1b95f81a3..7ea6451a3a3 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -6,10 +6,12 @@ config XTENSA select ARCH_WANT_FRAME_POINTERS select HAVE_IDE select GENERIC_ATOMIC64 + select GENERIC_CLOCKEVENTS select HAVE_GENERIC_HARDIRQS select VIRT_TO_BUS select GENERIC_IRQ_SHOW select GENERIC_CPU_DEVICES + select GENERIC_SCHED_CLOCK select MODULES_USE_ELF_RELA select GENERIC_PCI_IOMAP select ARCH_WANT_IPC_PARSE_VERSION @@ -17,6 +19,7 @@ config XTENSA select CLONE_BACKWARDS select IRQ_DOMAIN select HAVE_OPROFILE + select HAVE_FUNCTION_TRACER help Xtensa processors are 32-bit RISC machines designed by Tensilica primarily for embedded systems. These processors are both diff --git a/arch/xtensa/Kconfig.debug b/arch/xtensa/Kconfig.debug index a34010e0e51..af7da74d535 100644 --- a/arch/xtensa/Kconfig.debug +++ b/arch/xtensa/Kconfig.debug @@ -2,6 +2,16 @@ menu "Kernel hacking" source "lib/Kconfig.debug" +config DEBUG_TLB_SANITY + bool "Debug TLB sanity" + depends on DEBUG_KERNEL + help + Enable this to turn on TLB sanity check on each entry to userspace. + This check can spot missing TLB invalidation/wrong PTE permissions/ + premature page freeing. + + If unsure, say N. + config LD_NO_RELAX bool "Disable linker relaxation" default n diff --git a/arch/xtensa/boot/.gitignore b/arch/xtensa/boot/.gitignore new file mode 100644 index 00000000000..be7655998b2 --- /dev/null +++ b/arch/xtensa/boot/.gitignore @@ -0,0 +1,3 @@ +uImage +zImage.redboot +*.dtb diff --git a/arch/xtensa/boot/boot-elf/.gitignore b/arch/xtensa/boot/boot-elf/.gitignore new file mode 100644 index 00000000000..5ff8fbb8561 --- /dev/null +++ b/arch/xtensa/boot/boot-elf/.gitignore @@ -0,0 +1 @@ +boot.lds diff --git a/arch/xtensa/boot/lib/.gitignore b/arch/xtensa/boot/lib/.gitignore new file mode 100644 index 00000000000..1629a616775 --- /dev/null +++ b/arch/xtensa/boot/lib/.gitignore @@ -0,0 +1,3 @@ +inffast.c +inflate.c +inftrees.c diff --git a/arch/xtensa/boot/lib/Makefile b/arch/xtensa/boot/lib/Makefile index ad8952e8a07..6868f2ca6af 100644 --- a/arch/xtensa/boot/lib/Makefile +++ b/arch/xtensa/boot/lib/Makefile @@ -7,6 +7,13 @@ zlib := inffast.c inflate.c inftrees.c lib-y += $(zlib:.c=.o) zmem.o ccflags-y := -Ilib/zlib_inflate +ifdef CONFIG_FUNCTION_TRACER +CFLAGS_REMOVE_inflate.o = -pg +CFLAGS_REMOVE_zmem.o = -pg +CFLAGS_REMOVE_inftrees.o = -pg +CFLAGS_REMOVE_inffast.o = -pg +endif + quiet_cmd_copy_zlib = COPY $@ cmd_copy_zlib = cat $< > $@ diff --git a/arch/xtensa/include/asm/bootparam.h b/arch/xtensa/include/asm/bootparam.h index 0c25799faca..23392c5630c 100644 --- a/arch/xtensa/include/asm/bootparam.h +++ b/arch/xtensa/include/asm/bootparam.h @@ -20,7 +20,7 @@ #define BP_TAG_COMMAND_LINE 0x1001 /* command line (0-terminated string)*/ #define BP_TAG_INITRD 0x1002 /* ramdisk addr and size (bp_meminfo) */ #define BP_TAG_MEMORY 0x1003 /* memory addr and size (bp_meminfo) */ -#define BP_TAG_SERIAL_BAUSRATE 0x1004 /* baud rate of current console. */ +#define BP_TAG_SERIAL_BAUDRATE 0x1004 /* baud rate of current console. */ #define BP_TAG_SERIAL_PORT 0x1005 /* serial device of current console */ #define BP_TAG_FDT 0x1006 /* flat device tree addr */ diff --git a/arch/xtensa/include/asm/cmpxchg.h b/arch/xtensa/include/asm/cmpxchg.h index d9ab131bc1a..370b26f3841 100644 --- a/arch/xtensa/include/asm/cmpxchg.h +++ b/arch/xtensa/include/asm/cmpxchg.h @@ -93,6 +93,7 @@ static inline unsigned long __cmpxchg_local(volatile void *ptr, ((__typeof__(*(ptr)))__cmpxchg_local_generic((ptr), (unsigned long)(o),\ (unsigned long)(n), sizeof(*(ptr)))) #define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n)) +#define cmpxchg64(ptr, o, n) cmpxchg64_local((ptr), (o), (n)) /* * xchg_u32 diff --git a/arch/xtensa/include/asm/delay.h b/arch/xtensa/include/asm/delay.h index 61fc5faeb46..3899610c1df 100644 --- a/arch/xtensa/include/asm/delay.h +++ b/arch/xtensa/include/asm/delay.h @@ -12,7 +12,7 @@ #ifndef _XTENSA_DELAY_H #define _XTENSA_DELAY_H -#include <asm/processor.h> +#include <asm/timex.h> #include <asm/param.h> extern unsigned long loops_per_jiffy; @@ -24,24 +24,17 @@ static inline void __delay(unsigned long loops) : "=r" (loops) : "0" (loops)); } -static __inline__ u32 xtensa_get_ccount(void) -{ - u32 ccount; - asm volatile ("rsr %0, ccount\n" : "=r" (ccount)); - return ccount; -} - /* For SMP/NUMA systems, change boot_cpu_data to something like * local_cpu_data->... where local_cpu_data points to the current * cpu. */ static __inline__ void udelay (unsigned long usecs) { - unsigned long start = xtensa_get_ccount(); + unsigned long start = get_ccount(); unsigned long cycles = usecs * (loops_per_jiffy / (1000000UL / HZ)); /* Note: all variables are unsigned (can wrap around)! */ - while (((unsigned long)xtensa_get_ccount()) - start < cycles) + while (((unsigned long)get_ccount()) - start < cycles) ; } diff --git a/arch/xtensa/include/asm/ftrace.h b/arch/xtensa/include/asm/ftrace.h index 36dc7a68439..73cc3f48230 100644 --- a/arch/xtensa/include/asm/ftrace.h +++ b/arch/xtensa/include/asm/ftrace.h @@ -13,6 +13,7 @@ #include <asm/processor.h> #define HAVE_ARCH_CALLER_ADDR +#ifndef __ASSEMBLY__ #define CALLER_ADDR0 ({ unsigned long a0, a1; \ __asm__ __volatile__ ( \ "mov %0, a0\n" \ @@ -24,10 +25,22 @@ extern unsigned long return_address(unsigned level); #define CALLER_ADDR1 return_address(1) #define CALLER_ADDR2 return_address(2) #define CALLER_ADDR3 return_address(3) -#else +#else /* CONFIG_FRAME_POINTER */ #define CALLER_ADDR1 (0) #define CALLER_ADDR2 (0) #define CALLER_ADDR3 (0) -#endif +#endif /* CONFIG_FRAME_POINTER */ +#endif /* __ASSEMBLY__ */ + +#ifdef CONFIG_FUNCTION_TRACER + +#define MCOUNT_ADDR ((unsigned long)(_mcount)) +#define MCOUNT_INSN_SIZE 3 + +#ifndef __ASSEMBLY__ +extern void _mcount(void); +#define mcount _mcount +#endif /* __ASSEMBLY__ */ +#endif /* CONFIG_FUNCTION_TRACER */ #endif /* _XTENSA_FTRACE_H */ diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 8f017eb309b..0fdf5d043f8 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -5,7 +5,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. * - * Copyright (C) 2001 - 2007 Tensilica Inc. + * Copyright (C) 2001 - 2013 Tensilica Inc. */ #ifndef _XTENSA_PGTABLE_H @@ -64,41 +64,82 @@ * Virtual memory area. We keep a distance to other memory regions to be * on the safe side. We also use this area for cache aliasing. */ - #define VMALLOC_START 0xC0000000 #define VMALLOC_END 0xC7FEFFFF #define TLBTEMP_BASE_1 0xC7FF0000 #define TLBTEMP_BASE_2 0xC7FF8000 /* - * Xtensa Linux config PTE layout (when present): - * 31-12: PPN - * 11-6: Software - * 5-4: RING - * 3-0: CA + * For the Xtensa architecture, the PTE layout is as follows: + * + * 31------12 11 10-9 8-6 5-4 3-2 1-0 + * +-----------------------------------------+ + * | | Software | HARDWARE | + * | PPN | ADW | RI |Attribute| + * +-----------------------------------------+ + * pte_none | MBZ | 01 | 11 | 00 | + * +-----------------------------------------+ + * present | PPN | 0 | 00 | ADW | RI | CA | wx | + * +- - - - - - - - - - - - - - - - - - - - -+ + * (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 11 | 11 | + * +-----------------------------------------+ + * swap | index | type | 01 | 11 | 00 | + * +- - - - - - - - - - - - - - - - - - - - -+ + * file | file offset | 01 | 11 | 10 | + * +-----------------------------------------+ + * + * For T1050 hardware and earlier the layout differs for present and (PAGE_NONE) + * +-----------------------------------------+ + * present | PPN | 0 | 00 | ADW | RI | CA | w1 | + * +-----------------------------------------+ + * (PAGE_NONE)| PPN | 0 | 00 | ADW | 01 | 01 | 00 | + * +-----------------------------------------+ * - * Similar to the Alpha and MIPS ports, we need to keep track of the ref - * and mod bits in software. We have a software "you can read - * from this page" bit, and a hardware one which actually lets the - * process read from the page. On the same token we have a software - * writable bit and the real hardware one which actually lets the - * process write to the page. + * Legend: + * PPN Physical Page Number + * ADW software: accessed (young) / dirty / writable + * RI ring (0=privileged, 1=user, 2 and 3 are unused) + * CA cache attribute: 00 bypass, 01 writeback, 10 writethrough + * (11 is invalid and used to mark pages that are not present) + * w page is writable (hw) + * x page is executable (hw) + * index swap offset / PAGE_SIZE (bit 11-31: 21 bits -> 8 GB) + * (note that the index is always non-zero) + * type swap type (5 bits -> 32 types) + * file offset 26-bit offset into the file, in increments of PAGE_SIZE * - * See further below for PTE layout for swapped-out pages. + * Notes: + * - (PROT_NONE) is a special case of 'present' but causes an exception for + * any access (read, write, and execute). + * - 'multihit-exception' has the highest priority of all MMU exceptions, + * so the ring must be set to 'RING_USER' even for 'non-present' pages. + * - on older hardware, the exectuable flag was not supported and + * used as a 'valid' flag, so it needs to be always set. + * - we need to keep track of certain flags in software (dirty and young) + * to do this, we use write exceptions and have a separate software w-flag. + * - attribute value 1101 (and 1111 on T1050 and earlier) is reserved */ +#define _PAGE_ATTRIB_MASK 0xf + #define _PAGE_HW_EXEC (1<<0) /* hardware: page is executable */ #define _PAGE_HW_WRITE (1<<1) /* hardware: page is writable */ -#define _PAGE_FILE (1<<1) /* non-linear mapping, if !present */ -#define _PAGE_PROTNONE (3<<0) /* special case for VM_PROT_NONE */ - -/* None of these cache modes include MP coherency: */ #define _PAGE_CA_BYPASS (0<<2) /* bypass, non-speculative */ #define _PAGE_CA_WB (1<<2) /* write-back */ #define _PAGE_CA_WT (2<<2) /* write-through */ #define _PAGE_CA_MASK (3<<2) -#define _PAGE_INVALID (3<<2) +#define _PAGE_CA_INVALID (3<<2) + +/* We use invalid attribute values to distinguish special pte entries */ +#if XCHAL_HW_VERSION_MAJOR < 2000 +#define _PAGE_HW_VALID 0x01 /* older HW needed this bit set */ +#define _PAGE_NONE 0x04 +#else +#define _PAGE_HW_VALID 0x00 +#define _PAGE_NONE 0x0f +#endif +#define _PAGE_FILE (1<<1) /* file mapped page, only if !present */ #define _PAGE_USER (1<<4) /* user access (ring=1) */ @@ -108,19 +149,12 @@ #define _PAGE_DIRTY (1<<7) /* software: page dirty */ #define _PAGE_ACCESSED (1<<8) /* software: page accessed (read) */ -/* On older HW revisions, we always have to set bit 0 */ -#if XCHAL_HW_VERSION_MAJOR < 2000 -# define _PAGE_VALID (1<<0) -#else -# define _PAGE_VALID 0 -#endif - -#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) -#define _PAGE_PRESENT (_PAGE_VALID | _PAGE_CA_WB | _PAGE_ACCESSED) - #ifdef CONFIG_MMU -#define PAGE_NONE __pgprot(_PAGE_INVALID | _PAGE_USER | _PAGE_PROTNONE) +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY) +#define _PAGE_PRESENT (_PAGE_HW_VALID | _PAGE_CA_WB | _PAGE_ACCESSED) + +#define PAGE_NONE __pgprot(_PAGE_NONE | _PAGE_USER) #define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_USER) #define PAGE_COPY_EXEC __pgprot(_PAGE_PRESENT | _PAGE_USER | _PAGE_HW_EXEC) #define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_USER) @@ -132,9 +166,9 @@ #define PAGE_KERNEL_EXEC __pgprot(_PAGE_PRESENT|_PAGE_HW_WRITE|_PAGE_HW_EXEC) #if (DCACHE_WAY_SIZE > PAGE_SIZE) -# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED) +# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_BYPASS) #else -# define _PAGE_DIRECTORY (_PAGE_VALID | _PAGE_ACCESSED | _PAGE_CA_WB) +# define _PAGE_DIRECTORY (_PAGE_HW_VALID | _PAGE_ACCESSED | _PAGE_CA_WB) #endif #else /* no mmu */ @@ -202,12 +236,16 @@ static inline void pgtable_cache_init(void) { } /* * pte status. */ -#define pte_none(pte) (pte_val(pte) == _PAGE_INVALID) -#define pte_present(pte) \ - (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_INVALID) \ - || ((pte_val(pte) & _PAGE_PROTNONE) == _PAGE_PROTNONE)) +# define pte_none(pte) (pte_val(pte) == (_PAGE_CA_INVALID | _PAGE_USER)) +#if XCHAL_HW_VERSION_MAJOR < 2000 +# define pte_present(pte) ((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID) +#else +# define pte_present(pte) \ + (((pte_val(pte) & _PAGE_CA_MASK) != _PAGE_CA_INVALID) \ + || ((pte_val(pte) & _PAGE_ATTRIB_MASK) == _PAGE_NONE)) +#endif #define pte_clear(mm,addr,ptep) \ - do { update_pte(ptep, __pte(_PAGE_INVALID)); } while(0) + do { update_pte(ptep, __pte(_PAGE_CA_INVALID | _PAGE_USER)); } while (0) #define pmd_none(pmd) (!pmd_val(pmd)) #define pmd_present(pmd) (pmd_val(pmd) & PAGE_MASK) @@ -328,35 +366,23 @@ ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) /* - * Encode and decode a swap entry. - * - * Format of swap pte: - * bit 0 MBZ - * bit 1 page-file (must be zero) - * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) - * bits 4 - 5 ring protection (must be 01: _PAGE_USER) - * bits 6 - 10 swap type (5 bits -> 32 types) - * bits 11 - 31 swap offset / PAGE_SIZE (21 bits -> 8GB) - - * Format of file pte: - * bit 0 MBZ - * bit 1 page-file (must be one: _PAGE_FILE) - * bits 2 - 3 page hw access mode (must be 11: _PAGE_INVALID) - * bits 4 - 5 ring protection (must be 01: _PAGE_USER) - * bits 6 - 31 file offset / PAGE_SIZE + * Encode and decode a swap and file entry. */ +#define SWP_TYPE_BITS 5 +#define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > SWP_TYPE_BITS) #define __swp_type(entry) (((entry).val >> 6) & 0x1f) #define __swp_offset(entry) ((entry).val >> 11) #define __swp_entry(type,offs) \ - ((swp_entry_t) {((type) << 6) | ((offs) << 11) | _PAGE_INVALID}) + ((swp_entry_t){((type) << 6) | ((offs) << 11) | \ + _PAGE_CA_INVALID | _PAGE_USER}) #define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) #define __swp_entry_to_pte(x) ((pte_t) { (x).val }) -#define PTE_FILE_MAX_BITS 28 -#define pte_to_pgoff(pte) (pte_val(pte) >> 4) +#define PTE_FILE_MAX_BITS 26 +#define pte_to_pgoff(pte) (pte_val(pte) >> 6) #define pgoff_to_pte(off) \ - ((pte_t) { ((off) << 4) | _PAGE_INVALID | _PAGE_FILE }) + ((pte_t) { ((off) << 6) | _PAGE_CA_INVALID | _PAGE_FILE | _PAGE_USER }) #endif /* !defined (__ASSEMBLY__) */ diff --git a/arch/xtensa/include/asm/platform.h b/arch/xtensa/include/asm/platform.h index ec098b68fb9..32e98f27ce9 100644 --- a/arch/xtensa/include/asm/platform.h +++ b/arch/xtensa/include/asm/platform.h @@ -30,11 +30,6 @@ extern void platform_init(bp_tag_t*); extern void platform_setup (char **); /* - * platform_init_irq is called from init_IRQ. - */ -extern void platform_init_irq (void); - -/* * platform_restart is called to restart the system. */ extern void platform_restart (void); diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h index 3d35e5d0367..69f901713fb 100644 --- a/arch/xtensa/include/asm/timex.h +++ b/arch/xtensa/include/asm/timex.h @@ -35,19 +35,11 @@ # error "Bad timer number for Linux configurations!" #endif -#define LINUX_TIMER_MASK (1L << LINUX_TIMER_INT) - -#define CLOCK_TICK_RATE 1193180 /* (everyone is using this value) */ -#define CLOCK_TICK_FACTOR 20 /* Factor of both 10^6 and CLOCK_TICK_RATE */ - #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT -extern unsigned long ccount_per_jiffy; -extern unsigned long nsec_per_ccount; -#define CCOUNT_PER_JIFFY ccount_per_jiffy -#define NSEC_PER_CCOUNT nsec_per_ccount +extern unsigned long ccount_freq; +#define CCOUNT_PER_JIFFY (ccount_freq / HZ) #else #define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ)) -#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK) #endif diff --git a/arch/xtensa/kernel/.gitignore b/arch/xtensa/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/xtensa/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile index 1e7fc87a94b..f90265ec1cc 100644 --- a/arch/xtensa/kernel/Makefile +++ b/arch/xtensa/kernel/Makefile @@ -11,6 +11,7 @@ obj-y := align.o coprocessor.o entry.o irq.o pci-dma.o platform.o process.o \ obj-$(CONFIG_KGDB) += xtensa-stub.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o +obj-$(CONFIG_FUNCTION_TRACER) += mcount.o AFLAGS_head.o += -mtext-section-literals diff --git a/arch/xtensa/kernel/entry.S b/arch/xtensa/kernel/entry.S index 5082507d563..9298742f0fd 100644 --- a/arch/xtensa/kernel/entry.S +++ b/arch/xtensa/kernel/entry.S @@ -458,7 +458,7 @@ common_exception_return: _bbsi.l a4, TIF_NEED_RESCHED, 3f _bbsi.l a4, TIF_NOTIFY_RESUME, 2f - _bbci.l a4, TIF_SIGPENDING, 4f + _bbci.l a4, TIF_SIGPENDING, 5f 2: l32i a4, a1, PT_DEPC bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f @@ -476,6 +476,13 @@ common_exception_return: callx4 a4 j 1b +5: +#ifdef CONFIG_DEBUG_TLB_SANITY + l32i a4, a1, PT_DEPC + bgeui a4, VALID_DOUBLE_EXCEPTION_ADDRESS, 4f + movi a4, check_tlb_sanity + callx4 a4 +#endif 4: /* Restore optional registers. */ load_xtregs_opt a1 a2 a4 a5 a6 a7 PT_XTREGS_OPT @@ -1792,10 +1799,15 @@ ENTRY(fast_store_prohibited) l32i a0, a0, 0 beqz a0, 2f - /* Note that we assume _PAGE_WRITABLE_BIT is only set if pte is valid.*/ + /* + * Note that we test _PAGE_WRITABLE_BIT only if PTE is present + * and is not PAGE_NONE. See pgtable.h for possible PTE layouts. + */ _PTE_OFFSET(a0, a1, a4) l32i a4, a0, 0 # read pteval + movi a1, _PAGE_CA_INVALID + ball a4, a1, 2f bbci.l a4, _PAGE_WRITABLE_BIT, 2f movi a1, _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_HW_WRITE diff --git a/arch/xtensa/kernel/head.S b/arch/xtensa/kernel/head.S index ef12c0e6fa2..7d740ebbe19 100644 --- a/arch/xtensa/kernel/head.S +++ b/arch/xtensa/kernel/head.S @@ -68,6 +68,15 @@ _SetupMMU: #ifdef CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX initialize_mmu +#if defined(CONFIG_MMU) && XCHAL_HAVE_PTP_MMU && XCHAL_HAVE_SPANNING_WAY + rsr a2, excsave1 + movi a3, 0x08000000 + bgeu a2, a3, 1f + movi a3, 0xd0000000 + add a2, a2, a3 + wsr a2, excsave1 +1: +#endif #endif .end no-absolute-literals diff --git a/arch/xtensa/kernel/mcount.S b/arch/xtensa/kernel/mcount.S new file mode 100644 index 00000000000..0eeda2e4a25 --- /dev/null +++ b/arch/xtensa/kernel/mcount.S @@ -0,0 +1,50 @@ +/* + * arch/xtensa/kernel/mcount.S + * + * Xtensa specific mcount support + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2013 Tensilica Inc. + */ + +#include <linux/linkage.h> +#include <asm/ftrace.h> + +/* + * Entry condition: + * + * a2: a0 of the caller + */ + +ENTRY(_mcount) + + entry a1, 16 + + movi a4, ftrace_trace_function + l32i a4, a4, 0 + movi a3, ftrace_stub + bne a3, a4, 1f + retw + +1: xor a7, a2, a1 + movi a3, 0x3fffffff + and a7, a7, a3 + xor a7, a7, a1 + + xor a6, a0, a1 + and a6, a6, a3 + xor a6, a6, a1 + addi a6, a6, -MCOUNT_INSN_SIZE + callx4 a4 + + retw + +ENDPROC(_mcount) + +ENTRY(ftrace_stub) + entry a1, 16 + retw +ENDPROC(ftrace_stub) diff --git a/arch/xtensa/kernel/pci.c b/arch/xtensa/kernel/pci.c index 126c1883940..5b3403388d7 100644 --- a/arch/xtensa/kernel/pci.c +++ b/arch/xtensa/kernel/pci.c @@ -77,9 +77,9 @@ pcibios_align_resource(void *data, const struct resource *res, if (res->flags & IORESOURCE_IO) { if (size > 0x100) { - printk(KERN_ERR "PCI: I/O Region %s/%d too large" - " (%ld bytes)\n", pci_name(dev), - dev->resource - res, size); + pr_err("PCI: I/O Region %s/%d too large (%u bytes)\n", + pci_name(dev), dev->resource - res, + size); } if (start & 0x300) @@ -174,7 +174,7 @@ static int __init pcibios_init(void) struct pci_controller *pci_ctrl; struct list_head resources; struct pci_bus *bus; - int next_busno = 0, i; + int next_busno = 0; printk("PCI: Probing PCI hardware\n"); @@ -197,7 +197,7 @@ static int __init pcibios_init(void) subsys_initcall(pcibios_init); -void __init pcibios_fixup_bus(struct pci_bus *bus) +void pcibios_fixup_bus(struct pci_bus *bus) { if (bus->parent) { /* This is a subordinate bridge */ diff --git a/arch/xtensa/kernel/platform.c b/arch/xtensa/kernel/platform.c index 2bd6c351f37..1cf008284dd 100644 --- a/arch/xtensa/kernel/platform.c +++ b/arch/xtensa/kernel/platform.c @@ -29,7 +29,6 @@ */ _F(void, setup, (char** cmd), { }); -_F(void, init_irq, (void), { }); _F(void, restart, (void), { while(1); }); _F(void, halt, (void), { while(1); }); _F(void, power_off, (void), { while(1); }); @@ -42,6 +41,6 @@ _F(void, pcibios_init, (void), { }); _F(void, calibrate_ccount, (void), { pr_err("ERROR: Cannot calibrate cpu frequency! Assuming 10MHz.\n"); - ccount_per_jiffy = 10 * (1000000UL/HZ); + ccount_freq = 10 * 1000000UL; }); #endif diff --git a/arch/xtensa/kernel/setup.c b/arch/xtensa/kernel/setup.c index 6dd25ecde3f..42a8bba0b0e 100644 --- a/arch/xtensa/kernel/setup.c +++ b/arch/xtensa/kernel/setup.c @@ -152,8 +152,8 @@ static int __init parse_tag_initrd(const bp_tag_t* tag) { meminfo_t* mi; mi = (meminfo_t*)(tag->data); - initrd_start = (void*)(mi->start); - initrd_end = (void*)(mi->end); + initrd_start = __va(mi->start); + initrd_end = __va(mi->end); return 0; } @@ -164,7 +164,7 @@ __tagtable(BP_TAG_INITRD, parse_tag_initrd); static int __init parse_tag_fdt(const bp_tag_t *tag) { - dtb_start = (void *)(tag->data[0]); + dtb_start = __va(tag->data[0]); return 0; } @@ -256,7 +256,7 @@ void __init early_init_devtree(void *params) static void __init copy_devtree(void) { void *alloc = early_init_dt_alloc_memory_arch( - be32_to_cpu(initial_boot_params->totalsize), 0); + be32_to_cpu(initial_boot_params->totalsize), 8); if (alloc) { memcpy(alloc, initial_boot_params, be32_to_cpu(initial_boot_params->totalsize)); diff --git a/arch/xtensa/kernel/time.c b/arch/xtensa/kernel/time.c index ffb47410431..bdbb1731252 100644 --- a/arch/xtensa/kernel/time.c +++ b/arch/xtensa/kernel/time.c @@ -16,6 +16,7 @@ #include <linux/sched.h> #include <linux/time.h> #include <linux/clocksource.h> +#include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/module.h> #include <linux/init.h> @@ -23,13 +24,13 @@ #include <linux/profile.h> #include <linux/delay.h> #include <linux/irqdomain.h> +#include <linux/sched_clock.h> #include <asm/timex.h> #include <asm/platform.h> #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT -unsigned long ccount_per_jiffy; /* per 1/HZ */ -unsigned long nsec_per_ccount; /* nsec per ccount increment */ +unsigned long ccount_freq; /* ccount Hz */ #endif static cycle_t ccount_read(struct clocksource *cs) @@ -37,6 +38,11 @@ static cycle_t ccount_read(struct clocksource *cs) return (cycle_t)get_ccount(); } +static u32 notrace ccount_sched_clock_read(void) +{ + return get_ccount(); +} + static struct clocksource ccount_clocksource = { .name = "ccount", .rating = 200, @@ -44,29 +50,98 @@ static struct clocksource ccount_clocksource = { .mask = CLOCKSOURCE_MASK(32), }; +static int ccount_timer_set_next_event(unsigned long delta, + struct clock_event_device *dev); +static void ccount_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt); +static struct ccount_timer_t { + struct clock_event_device evt; + int irq_enabled; +} ccount_timer = { + .evt = { + .name = "ccount_clockevent", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 300, + .set_next_event = ccount_timer_set_next_event, + .set_mode = ccount_timer_set_mode, + }, +}; + +static int ccount_timer_set_next_event(unsigned long delta, + struct clock_event_device *dev) +{ + unsigned long flags, next; + int ret = 0; + + local_irq_save(flags); + next = get_ccount() + delta; + set_linux_timer(next); + if (next - get_ccount() > delta) + ret = -ETIME; + local_irq_restore(flags); + + return ret; +} + +static void ccount_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct ccount_timer_t *timer = + container_of(evt, struct ccount_timer_t, evt); + + /* + * There is no way to disable the timer interrupt at the device level, + * only at the intenable register itself. Since enable_irq/disable_irq + * calls are nested, we need to make sure that these calls are + * balanced. + */ + switch (mode) { + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_UNUSED: + if (timer->irq_enabled) { + disable_irq(evt->irq); + timer->irq_enabled = 0; + } + break; + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_ONESHOT: + if (!timer->irq_enabled) { + enable_irq(evt->irq); + timer->irq_enabled = 1; + } + default: + break; + } +} + static irqreturn_t timer_interrupt(int irq, void *dev_id); static struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_DISABLED, + .flags = IRQF_TIMER, .name = "timer", + .dev_id = &ccount_timer, }; void __init time_init(void) { - unsigned int irq; #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT printk("Calibrating CPU frequency "); platform_calibrate_ccount(); - printk("%d.%02d MHz\n", (int)ccount_per_jiffy/(1000000/HZ), - (int)(ccount_per_jiffy/(10000/HZ))%100); + printk("%d.%02d MHz\n", (int)ccount_freq/1000000, + (int)(ccount_freq/10000)%100); #endif clocksource_register_hz(&ccount_clocksource, CCOUNT_PER_JIFFY * HZ); - /* Initialize the linux timer interrupt. */ + ccount_timer.evt.cpumask = cpumask_of(0); + ccount_timer.evt.irq = irq_create_mapping(NULL, LINUX_TIMER_INT); + if (WARN(!ccount_timer.evt.irq, "error: can't map timer irq")) + return; + clockevents_config_and_register(&ccount_timer.evt, ccount_freq, 0xf, + 0xffffffff); + setup_irq(ccount_timer.evt.irq, &timer_irqaction); + ccount_timer.irq_enabled = 1; - irq = irq_create_mapping(NULL, LINUX_TIMER_INT); - setup_irq(irq, &timer_irqaction); - set_linux_timer(get_ccount() + CCOUNT_PER_JIFFY); + setup_sched_clock(ccount_sched_clock_read, 32, ccount_freq); } /* @@ -75,36 +150,14 @@ void __init time_init(void) irqreturn_t timer_interrupt (int irq, void *dev_id) { + struct ccount_timer_t *timer = dev_id; + struct clock_event_device *evt = &timer->evt; - unsigned long next; - - next = get_linux_timer(); - -again: - while ((signed long)(get_ccount() - next) > 0) { - - profile_tick(CPU_PROFILING); -#ifndef CONFIG_SMP - update_process_times(user_mode(get_irq_regs())); -#endif - - xtime_update(1); /* Linux handler in kernel/time/timekeeping */ - - /* Note that writing CCOMPARE clears the interrupt. */ - - next += CCOUNT_PER_JIFFY; - set_linux_timer(next); - } + evt->event_handler(evt); /* Allow platform to do something useful (Wdog). */ - platform_heartbeat(); - /* Make sure we didn't miss any tick... */ - - if ((signed long)(get_ccount() - next) > 0) - goto again; - return IRQ_HANDLED; } diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index 42c53c87c20..d8507f812f4 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -124,3 +124,7 @@ extern long common_exception_return; extern long _spill_registers; EXPORT_SYMBOL(common_exception_return); EXPORT_SYMBOL(_spill_registers); + +#ifdef CONFIG_FUNCTION_TRACER +EXPORT_SYMBOL(_mcount); +#endif diff --git a/arch/xtensa/mm/tlb.c b/arch/xtensa/mm/tlb.c index 5411aa67c68..ca9d2366bf1 100644 --- a/arch/xtensa/mm/tlb.c +++ b/arch/xtensa/mm/tlb.c @@ -64,7 +64,7 @@ void flush_tlb_mm(struct mm_struct *mm) { if (mm == current->active_mm) { unsigned long flags; - local_save_flags(flags); + local_irq_save(flags); __get_new_mmu_context(mm); __load_mmu_context(mm); local_irq_restore(flags); @@ -94,7 +94,7 @@ void flush_tlb_range (struct vm_area_struct *vma, printk("[tlbrange<%02lx,%08lx,%08lx>]\n", (unsigned long)mm->context, start, end); #endif - local_save_flags(flags); + local_irq_save(flags); if (end-start + (PAGE_SIZE-1) <= _TLB_ENTRIES << PAGE_SHIFT) { int oldpid = get_rasid_register(); @@ -128,9 +128,10 @@ void flush_tlb_page (struct vm_area_struct *vma, unsigned long page) if(mm->context == NO_CONTEXT) return; - local_save_flags(flags); + local_irq_save(flags); oldpid = get_rasid_register(); + set_rasid_register(ASID_INSERT(mm->context)); if (vma->vm_flags & VM_EXEC) invalidate_itlb_mapping(page); @@ -140,3 +141,116 @@ void flush_tlb_page (struct vm_area_struct *vma, unsigned long page) local_irq_restore(flags); } + +#ifdef CONFIG_DEBUG_TLB_SANITY + +static unsigned get_pte_for_vaddr(unsigned vaddr) +{ + struct task_struct *task = get_current(); + struct mm_struct *mm = task->mm; + pgd_t *pgd; + pmd_t *pmd; + pte_t *pte; + + if (!mm) + mm = task->active_mm; + pgd = pgd_offset(mm, vaddr); + if (pgd_none_or_clear_bad(pgd)) + return 0; + pmd = pmd_offset(pgd, vaddr); + if (pmd_none_or_clear_bad(pmd)) + return 0; + pte = pte_offset_map(pmd, vaddr); + if (!pte) + return 0; + return pte_val(*pte); +} + +enum { + TLB_SUSPICIOUS = 1, + TLB_INSANE = 2, +}; + +static void tlb_insane(void) +{ + BUG_ON(1); +} + +static void tlb_suspicious(void) +{ + WARN_ON(1); +} + +/* + * Check that TLB entries with kernel ASID (1) have kernel VMA (>= TASK_SIZE), + * and TLB entries with user ASID (>=4) have VMA < TASK_SIZE. + * + * Check that valid TLB entries either have the same PA as the PTE, or PTE is + * marked as non-present. Non-present PTE and the page with non-zero refcount + * and zero mapcount is normal for batched TLB flush operation. Zero refcount + * means that the page was freed prematurely. Non-zero mapcount is unusual, + * but does not necessary means an error, thus marked as suspicious. + */ +static int check_tlb_entry(unsigned w, unsigned e, bool dtlb) +{ + unsigned tlbidx = w | (e << PAGE_SHIFT); + unsigned r0 = dtlb ? + read_dtlb_virtual(tlbidx) : read_itlb_virtual(tlbidx); + unsigned vpn = (r0 & PAGE_MASK) | (e << PAGE_SHIFT); + unsigned pte = get_pte_for_vaddr(vpn); + unsigned mm_asid = (get_rasid_register() >> 8) & ASID_MASK; + unsigned tlb_asid = r0 & ASID_MASK; + bool kernel = tlb_asid == 1; + int rc = 0; + + if (tlb_asid > 0 && ((vpn < TASK_SIZE) == kernel)) { + pr_err("%cTLB: way: %u, entry: %u, VPN %08x in %s PTE\n", + dtlb ? 'D' : 'I', w, e, vpn, + kernel ? "kernel" : "user"); + rc |= TLB_INSANE; + } + + if (tlb_asid == mm_asid) { + unsigned r1 = dtlb ? read_dtlb_translation(tlbidx) : + read_itlb_translation(tlbidx); + if ((pte ^ r1) & PAGE_MASK) { + pr_err("%cTLB: way: %u, entry: %u, mapping: %08x->%08x, PTE: %08x\n", + dtlb ? 'D' : 'I', w, e, r0, r1, pte); + if (pte == 0 || !pte_present(__pte(pte))) { + struct page *p = pfn_to_page(r1 >> PAGE_SHIFT); + pr_err("page refcount: %d, mapcount: %d\n", + page_count(p), + page_mapcount(p)); + if (!page_count(p)) + rc |= TLB_INSANE; + else if (page_mapped(p)) + rc |= TLB_SUSPICIOUS; + } else { + rc |= TLB_INSANE; + } + } + } + return rc; +} + +void check_tlb_sanity(void) +{ + unsigned long flags; + unsigned w, e; + int bug = 0; + + local_irq_save(flags); + for (w = 0; w < DTLB_ARF_WAYS; ++w) + for (e = 0; e < (1 << XCHAL_DTLB_ARF_ENTRIES_LOG2); ++e) + bug |= check_tlb_entry(w, e, true); + for (w = 0; w < ITLB_ARF_WAYS; ++w) + for (e = 0; e < (1 << XCHAL_ITLB_ARF_ENTRIES_LOG2); ++e) + bug |= check_tlb_entry(w, e, false); + if (bug & TLB_INSANE) + tlb_insane(); + if (bug & TLB_SUSPICIOUS) + tlb_suspicious(); + local_irq_restore(flags); +} + +#endif /* CONFIG_DEBUG_TLB_SANITY */ diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index 7d0fea6d7f2..56f88b7afe2 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -700,7 +700,7 @@ struct iss_net_init { #define ERR KERN_ERR "iss_net_setup: " -static int iss_net_setup(char *str) +static int __init iss_net_setup(char *str) { struct iss_net_private *device = NULL; struct iss_net_init *new; diff --git a/arch/xtensa/platforms/iss/simdisk.c b/arch/xtensa/platforms/iss/simdisk.c index c0edb35424c..8c6e819cd8e 100644 --- a/arch/xtensa/platforms/iss/simdisk.c +++ b/arch/xtensa/platforms/iss/simdisk.c @@ -108,13 +108,13 @@ static int simdisk_xfer_bio(struct simdisk *dev, struct bio *bio) sector_t sector = bio->bi_sector; bio_for_each_segment(bvec, bio, i) { - char *buffer = __bio_kmap_atomic(bio, i, KM_USER0); + char *buffer = __bio_kmap_atomic(bio, i); unsigned len = bvec->bv_len >> SECTOR_SHIFT; simdisk_transfer(dev, sector, len, buffer, bio_data_dir(bio) == WRITE); sector += len; - __bio_kunmap_atomic(bio, KM_USER0); + __bio_kunmap_atomic(bio); } return 0; } diff --git a/arch/xtensa/platforms/xtfpga/setup.c b/arch/xtensa/platforms/xtfpga/setup.c index 96ef8eeb064..74bb74fa3f8 100644 --- a/arch/xtensa/platforms/xtfpga/setup.c +++ b/arch/xtensa/platforms/xtfpga/setup.c @@ -163,7 +163,7 @@ void platform_heartbeat(void) #ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT -void platform_calibrate_ccount(void) +void __init platform_calibrate_ccount(void) { long clk_freq = 0; #ifdef CONFIG_OF @@ -179,8 +179,7 @@ void platform_calibrate_ccount(void) if (!clk_freq) clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR; - ccount_per_jiffy = clk_freq / HZ; - nsec_per_ccount = 1000000000UL / clk_freq; + ccount_freq = clk_freq; } #endif diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c index 54b2b573f16..39154563ee1 100644 --- a/arch/xtensa/variants/s6000/delay.c +++ b/arch/xtensa/variants/s6000/delay.c @@ -1,4 +1,3 @@ -#include <asm/delay.h> #include <asm/timex.h> #include <asm/io.h> #include <variant/hardware.h> @@ -17,11 +16,10 @@ void platform_calibrate_ccount(void) "1: l32i %0, %2, 0 ;" " beq %0, %1, 1b ;" : "=&a"(u) : "a"(t), "a"(tstamp)); - b = xtensa_get_ccount(); + b = get_ccount(); if (i == LOOPS) a = b; } while (--i >= 0); b -= a; - nsec_per_ccount = (LOOPS * 10000) / b; - ccount_per_jiffy = b * (100000UL / (LOOPS * HZ)); + ccount_freq = b * (100000UL / LOOPS); } |