diff options
Diffstat (limited to 'arch')
197 files changed, 6668 insertions, 3410 deletions
diff --git a/arch/Kconfig b/arch/Kconfig index b0fabfa864f..364c6dadde0 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -59,6 +59,24 @@ config HAVE_KPROBES config HAVE_KRETPROBES def_bool n +# +# An arch should select this if it provides all these things: +# +# task_pt_regs() in asm/processor.h or asm/ptrace.h +# arch_has_single_step() if there is hardware single-step support +# arch_has_block_step() if there is hardware block-step support +# arch_ptrace() and not #define __ARCH_SYS_PTRACE +# compat_arch_ptrace() and #define __ARCH_WANT_COMPAT_SYS_PTRACE +# asm/syscall.h supplying asm-generic/syscall.h interface +# linux/regset.h user_regset interfaces +# CORE_DUMP_USE_REGSET #define'd in linux/elf.h +# TIF_SYSCALL_TRACE calls tracehook_report_syscall_{entry,exit} +# TIF_NOTIFY_RESUME calls tracehook_notify_resume() +# signal delivery calls tracehook_signal_handler() +# +config HAVE_ARCH_TRACEHOOK + def_bool n + config HAVE_DMA_ATTRS def_bool n diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 32ca1b92730..6e943135f0e 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -253,15 +253,15 @@ do_osf_statfs(struct dentry * dentry, struct osf_statfs __user *buffer, } asmlinkage int -osf_statfs(char __user *path, struct osf_statfs __user *buffer, unsigned long bufsiz) +osf_statfs(char __user *pathname, struct osf_statfs __user *buffer, unsigned long bufsiz) { - struct nameidata nd; + struct path path; int retval; - retval = user_path_walk(path, &nd); + retval = user_path(pathname, &path); if (!retval) { - retval = do_osf_statfs(nd.path.dentry, buffer, bufsiz); - path_put(&nd.path); + retval = do_osf_statfs(path.dentry, buffer, bufsiz); + path_put(&path); } return retval; } diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index 40c15e7301d..234e42b8ee7 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -94,36 +94,6 @@ __bad_page(void) return pte_mkdirty(mk_pte(virt_to_page(EMPTY_PGE), PAGE_SHARED)); } -#ifndef CONFIG_DISCONTIGMEM -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} -#endif - static inline unsigned long load_PCB(struct pcb_struct *pcb) { diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index d8c4ceaf00b..a13de49d126 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -359,38 +359,3 @@ void __init mem_init(void) mem_stress(); #endif } - -void -show_mem(void) -{ - long i,free = 0,total = 0,reserved = 0; - long shared = 0, cached = 0; - int nid; - - printk("\nMem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_node(nid) { - unsigned long flags; - pgdat_resize_lock(NODE_DATA(nid), &flags); - i = node_spanned_pages(nid); - while (i-- > 0) { - struct page *page = nid_page_nr(nid, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(NODE_DATA(nid), &flags); - } - printk("%ld pages of RAM\n",total); - printk("%ld free pages\n",free); - printk("%ld reserved pages\n",reserved); - printk("%ld pages shared\n",shared); - printk("%ld pages swap cached\n",cached); -} diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index dabb015aa40..c8f528284a9 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -314,7 +314,7 @@ config ARCH_IOP32X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -325,7 +325,7 @@ config ARCH_IOP33X select PLAT_IOP select PCI select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Intel's IOP33X (XScale) family of processors. @@ -418,7 +418,7 @@ config ARCH_MXC select GENERIC_CLOCKEVENTS select ARCH_MTD_XIP select GENERIC_GPIO - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/Makefile b/arch/arm/Makefile index b20995a82e0..2f074774423 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -67,7 +67,7 @@ tune-$(CONFIG_CPU_ARM720T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM740T) :=-mtune=arm7tdmi tune-$(CONFIG_CPU_ARM9TDMI) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM940T) :=-mtune=arm9tdmi -tune-$(CONFIG_CPU_ARM946T) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) +tune-$(CONFIG_CPU_ARM946E) :=$(call cc-option,-mtune=arm9e,-mtune=arm9tdmi) tune-$(CONFIG_CPU_ARM920T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM922T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_ARM925T) :=-mtune=arm9tdmi diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index dd294734260..69130f36590 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -280,7 +280,7 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, /* * Trying to unmap an invalid mapping */ - if (dma_mapping_error(dma_addr)) { + if (dma_mapping_error(dev, dma_addr)) { dev_err(dev, "Trying to unmap invalid mapping\n"); return; } diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index c3c3a333904..85579654d3b 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -331,17 +331,17 @@ static int locomo_gpio_type(unsigned int irq, unsigned int type) mask = 1 << (irq - LOCOMO_IRQ_GPIO_START); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= mask; else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= mask; else GPIO_IRQ_falling_edge &= ~mask; @@ -473,7 +473,7 @@ static void locomo_setup_irq(struct locomo *lchip) /* * Install handler for IRQ_LOCOMO_HW. */ - set_irq_type(lchip->irq, IRQT_FALLING); + set_irq_type(lchip->irq, IRQ_TYPE_EDGE_FALLING); set_irq_chip_data(lchip->irq, irqbase); set_irq_chained_handler(lchip->irq, locomo_handler); diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 0a8e1ff2af8..f6d3fdda706 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -241,14 +241,14 @@ static int sa1111_type_lowirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip0; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip0 = sa1111_readl(mapbase + SA1111_INTPOL0); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip0 &= ~mask; else ip0 |= mask; @@ -338,14 +338,14 @@ static int sa1111_type_highirq(unsigned int irq, unsigned int flags) void __iomem *mapbase = get_irq_chip_data(irq); unsigned long ip1; - if (flags == IRQT_PROBE) + if (flags == IRQ_TYPE_PROBE) return 0; - if ((!(flags & __IRQT_RISEDGE) ^ !(flags & __IRQT_FALEDGE)) == 0) + if ((!(flags & IRQ_TYPE_EDGE_RISING) ^ !(flags & IRQ_TYPE_EDGE_FALLING)) == 0) return -EINVAL; ip1 = sa1111_readl(mapbase + SA1111_INTPOL1); - if (flags & __IRQT_RISEDGE) + if (flags & IRQ_TYPE_EDGE_RISING) ip1 &= ~mask; else ip1 |= mask; @@ -427,7 +427,7 @@ static void sa1111_setup_irq(struct sa1111 *sachip) /* * Register SA1111 interrupt */ - set_irq_type(sachip->irq, IRQT_RISING); + set_irq_type(sachip->irq, IRQ_TYPE_EDGE_RISING); set_irq_data(sachip->irq, irqbase); set_irq_chained_handler(sachip->irq, sa1111_irq_handler); } diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig index 493ecee24f9..2307587a38a 100644 --- a/arch/arm/configs/eseries_pxa_defconfig +++ b/arch/arm/configs/eseries_pxa_defconfig @@ -1,15 +1,19 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-hh17 -# Fri Nov 9 20:23:03 2007 +# Linux kernel version: 2.6.26 +# Sat Jul 26 22:28:46 2008 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y # CONFIG_NO_IOPORT is not set CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y @@ -18,75 +22,90 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_ZONE_DMA=y CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set +# CONFIG_HAVE_IOREMAP_PROT is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_ARCH_TRACEHOOK is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_CLK=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -100,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type @@ -111,21 +131,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set # CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set @@ -133,80 +158,48 @@ CONFIG_ARCH_PXA=y # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_BOARD_IRQ_MAP_SMALL is not set -CONFIG_BOARD_IRQ_MAP_BIG=y -CONFIG_DMABOUNCE=y +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set # CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set -CONFIG_TOSHIBA_TMIO_OHCI=y -CONFIG_ARCH_ESERIES=y +# CONFIG_PXA_SHARPSL is not set +CONFIG_ARCH_PXA_ESERIES=y CONFIG_MACH_E330=y +CONFIG_MACH_E350=y CONFIG_MACH_E740=y CONFIG_MACH_E750=y CONFIG_MACH_E400=y CONFIG_MACH_E800=y -CONFIG_E330_LCD=y -CONFIG_E740_LCD=y -CONFIG_E750_LCD=y -CONFIG_E400_LCD=y -CONFIG_E800_LCD=y -CONFIG_ESERIES_UDC=y -CONFIG_E330_TC6387XB=y -CONFIG_E740_T7L66XB=y -CONFIG_E400_T7L66XB=y -CONFIG_E750_E800_TC6393XB=y -CONFIG_E740_PCMCIA=m -CONFIG_E750_PCMCIA=m -CONFIG_E800_PCMCIA=m -# CONFIG_MACH_A620 is not set -# CONFIG_MACH_A716 is not set -# CONFIG_MACH_A730 is not set -# CONFIG_ARCH_H1900 is not set -# CONFIG_ARCH_H2200 is not set -# CONFIG_MACH_H3900 is not set -# CONFIG_MACH_H4000 is not set -# CONFIG_MACH_H4700 is not set -# CONFIG_MACH_HX2750 is not set -# CONFIG_ARCH_H5400 is not set -# CONFIG_MACH_HIMALAYA is not set -# CONFIG_MACH_HTCUNIVERSAL is not set -# CONFIG_MACH_HTCALPINE is not set -# CONFIG_MACH_MAGICIAN is not set -# CONFIG_MACH_HTCAPACHE is not set -# CONFIG_MACH_BLUEANGEL is not set - -# -# HTC_HW6X00 -# -# CONFIG_MACH_HTCBEETLES is not set -# CONFIG_MACH_HW6900 is not set -# CONFIG_MACH_HTCATHENA is not set -# CONFIG_ARCH_AXIMX3 is not set -# CONFIG_ARCH_AXIMX5 is not set -# CONFIG_MACH_X50 is not set -# CONFIG_ARCH_ROVERP1 is not set -# CONFIG_ARCH_ROVERP5P is not set -# CONFIG_MACH_XSCALE_PALMLD is not set -# CONFIG_MACH_T3XSCALE is not set -# CONFIG_MACH_RECON is not set -# CONFIG_MACH_GHI270HG is not set -# CONFIG_MACH_GHI270 is not set -# CONFIG_MACH_LOOXC550 is not set -# CONFIG_PXA_SHARPSL is not set # CONFIG_MACH_TRIZEPS4 is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA25x=y +# CONFIG_PXA_PWM is not set + +# +# Boot options +# # -# Linux As Bootloader +# Power management # -# CONFIG_LAB is not set # # Processor Type @@ -215,6 +208,7 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y CONFIG_CPU_CP15=y @@ -232,11 +226,9 @@ CONFIG_XSCALE_PMU=y # # Bus support # - -# -# PCCARD (PCMCIA/CardBus) support -# -CONFIG_PCCARD=m +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=m CONFIG_PCMCIA_LOAD_CIS=y @@ -245,11 +237,14 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -CONFIG_PCMCIA_PXA2XX=m # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_PREEMPT is not set CONFIG_HZ=100 CONFIG_AEABI=y @@ -262,9 +257,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -275,7 +274,7 @@ CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y -# CONFIG_TXTOFFSET_DELTA is not set +CONFIG_ATAGS_PROC=y # # CPU Frequency scaling @@ -304,11 +303,12 @@ CONFIG_BINFMT_MISC=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y # CONFIG_PM_DEBUG is not set -# CONFIG_DPM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y # # Networking @@ -318,13 +318,13 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -339,35 +339,40 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set +CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=y +CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y +# CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -380,10 +385,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -391,15 +392,74 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +# CONFIG_CAN is not set +CONFIG_IRDA=y + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +CONFIG_IRDA_ULTRA=y + +# +# IrDA options +# +CONFIG_IRDA_CACHE_LAST_LSAP=y +CONFIG_IRDA_FAST_RR=y +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +CONFIG_PXA_FICP=y +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_PID=y +CONFIG_MAC80211_RC_DEFAULT_PID=y +CONFIG_MAC80211_RC_DEFAULT="pid" +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_LEDS is not set +# CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m -# CONFIG_IEEE80211_CRYPT_CCMP is not set -# CONFIG_IEEE80211_CRYPT_TKIP is not set -# CONFIG_IEEE80211_SOFTMAC is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_CCMP=m +CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -408,38 +468,32 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=m # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_PARTITIONS is not set # # User Modules And Translation Layers # -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set # CONFIG_MTD_BLOCK_RO is not set # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -459,7 +513,6 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -482,82 +535,43 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set -# CONFIG_MTD_NAND_H1900 is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_SHARPSL is not set -# CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=m # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=6144 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=m -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECS is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_PROC_FS is not set @@ -565,7 +579,7 @@ CONFIG_SCSI=m # # SCSI support type (disk, tape, CD-ROM) # -# CONFIG_BLK_DEV_SD is not set +CONFIG_BLK_DEV_SD=m # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -579,6 +593,7 @@ CONFIG_SCSI=m # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -586,132 +601,78 @@ CONFIG_SCSI=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -# CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_SRP_ATTRS is not set +# CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +CONFIG_ATA=m +# CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set +CONFIG_PATA_PCMCIA=m +# CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_VETH is not set # CONFIG_NET_ETHERNET is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -# CONFIG_NET_WIRELESS_RTNETLINK is not set - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y # CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_HERMES is not set +# CONFIG_LIBERTAS is not set +CONFIG_HERMES=m +CONFIG_PCMCIA_HERMES=m +# CONFIG_PCMCIA_SPECTRUM is not set # CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# # CONFIG_AIRO_CS is not set # CONFIG_PCMCIA_WL3501 is not set # CONFIG_USB_ZD1201 is not set -CONFIG_HOSTAP=m -# CONFIG_HOSTAP_FIRMWARE is not set -# CONFIG_HOSTAP_CS is not set -# CONFIG_ACX is not set -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support -# -# CONFIG_NET_PCMCIA is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8187 is not set +# CONFIG_MAC80211_HWSIM is not set +# CONFIG_P54_COMMON is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set # -# Wan interfaces +# USB Network Adapters # +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # @@ -719,38 +680,48 @@ CONFIG_NET_WIRELESS=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -CONFIG_INPUT_TSDEV=m -CONFIG_INPUT_TSDEV_SCREEN_X=240 -CONFIG_INPUT_TSDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_LED_TRIGGER is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=m # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set # CONFIG_TOUCHSCREEN_UCB1400 is not set +CONFIG_TOUCHSCREEN_WM97XX=m +CONFIG_TOUCHSCREEN_WM9705=y +CONFIG_TOUCHSCREEN_WM9712=y +CONFIG_TOUCHSCREEN_WM9713=y +# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set # @@ -763,9 +734,11 @@ CONFIG_TOUCHSCREEN_WM9713=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -777,25 +750,12 @@ CONFIG_HW_CONSOLE=y # Non-8250 serial port support # # CONFIG_SERIAL_PXA is not set -# CONFIG_RS232_SERIAL is not set CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_SA1100_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set -# CONFIG_TIHTC is not set # # PCMCIA character devices @@ -803,117 +763,79 @@ CONFIG_HW_RANDOM=m # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set # -# Hardware Monitoring support -# -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set -# CONFIG_POWER_SUPPLY is not set - -# -# L3 serial bus support -# -# CONFIG_L3 is not set - -# -# Misc devices +# I2C GPIO expanders: # # -# Multimedia Capabilities Port drivers +# PCI GPIO expanders: # -# CONFIG_ADC is not set # -# Compaq/iPAQ Drivers +# SPI GPIO expanders: # +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Compaq/HP iPAQ Drivers +# Sonics Silicon Backplane # -# CONFIG_IPAQ_SLEEVE is not set -# CONFIG_SLEEVE_DEBUG is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +CONFIG_MFD_CORE=y # CONFIG_MFD_SM501 is not set -# CONFIG_HTC_ASIC2 is not set -# CONFIG_HTC_ASIC3 is not set -# CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_BBKEYS is not set -# CONFIG_HTC_ASIC3_DS1WM is not set -# CONFIG_SOC_SAMCOP is not set -# CONFIG_SOC_HAMCOP is not set -# CONFIG_SOC_MQ11XX is not set -CONFIG_SOC_T7L66XB=y -# CONFIG_SOC_TC6387XB is not set -CONFIG_SOC_TC6393XB=y -# CONFIG_SOC_TSC2101 is not set -# CONFIG_SOC_TSC2200 is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# +# CONFIG_HTC_PASIC3 is not set +CONFIG_MFD_TC6393XB=y # -# LED Triggers +# Multimedia devices # -# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -923,14 +845,25 @@ CONFIG_FB_CFB_IMAGEBLIT=y # # Frame buffer hardware drivers # -# CONFIG_FB_IMAGEON is not set # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set # CONFIG_FB_MBX is not set CONFIG_FB_W100=y +# CONFIG_FB_AM200EPD is not set # CONFIG_FB_VIRTUAL is not set -# CONFIG_FB_VSFB is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -938,6 +871,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y # CONFIG_FONT_8x8 is not set @@ -945,28 +879,13 @@ CONFIG_FONTS=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_7x14 is not set # CONFIG_FONT_PEARL_8x8 is not set -CONFIG_FONT_ACORN_8x8=y -# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_ACORN_8x8 is not set +CONFIG_FONT_MINI_4x6=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y - -# -# Sound -# +# CONFIG_LOGO is not set CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -980,125 +899,75 @@ CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# ALSA ARM devices -# +CONFIG_SND_ARM=y # CONFIG_SND_PXA2XX_AC97 is not set -# CONFIG_SND_RECON is not set - -# -# USB devices -# -# CONFIG_SND_USB_AUDIO is not set - -# -# PCMCIA devices -# -# CONFIG_SND_VXPOCKET is not set -# CONFIG_SND_PDAUDIOCF is not set - -# -# SoC audio support -# -CONFIG_SND_SOC_AC97_BUS=y +# CONFIG_SND_USB is not set +# CONFIG_SND_PCMCIA is not set CONFIG_SND_SOC=m - -# -# SoC Platforms -# - -# -# SoC Audio for the Atmel AT91 -# - -# -# SoC Audio for the Intel PXA2xx -# +CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_PXA2XX_SOC=m CONFIG_SND_PXA2XX_SOC_AC97=m -CONFIG_SND_PXA2XX_SOC_E740_WM9705=m -CONFIG_SND_PXA2XX_SOC_E750_WM9705=m -CONFIG_SND_PXA2XX_SOC_E800_WM9712=m -# CONFIG_SND_PXA2XX_SOC_MAGICIAN is not set -# CONFIG_SND_PXA2XX_SOC_BLUEANGEL is not set -# CONFIG_SND_PXA2XX_SOC_H5000 is not set - -# -# SoC Audio for the Freescale i.MX -# - -# -# SoC Audio for the Samsung S3C24XX -# -# CONFIG_SND_SOC_AC97_CODEC is not set -# CONFIG_SND_SOC_WM8711 is not set -# CONFIG_SND_SOC_WM8510 is not set -# CONFIG_SND_SOC_WM8731 is not set -# CONFIG_SND_SOC_WM8750 is not set -# CONFIG_SND_SOC_WM8753 is not set -# CONFIG_SND_SOC_WM8772 is not set -# CONFIG_SND_SOC_WM8971 is not set -# CONFIG_SND_SOC_WM8956 is not set -# CONFIG_SND_SOC_WM8960 is not set -# CONFIG_SND_SOC_WM8976 is not set -# CONFIG_SND_SOC_WM8974 is not set -# CONFIG_SND_SOC_WM8980 is not set -CONFIG_SND_SOC_WM9705=m -# CONFIG_SND_SOC_WM9713 is not set +CONFIG_SND_PXA2XX_SOC_E800=m CONFIG_SND_SOC_WM9712=m -# CONFIG_SND_SOC_UDA1380 is not set -# CONFIG_SND_SOC_AK4535 is not set - -# -# Open Sound System -# # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# HID Devices +# USB Input Devices # -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set +CONFIG_USB_HID=m +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set # -# USB support +# USB HID Boot Protocol drivers # +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m -CONFIG_USB_DEBUG=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # -CONFIG_USB_DEVICEFS=y -CONFIG_USB_DYNAMIC_MINORS=y +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1107,68 +976,19 @@ CONFIG_USB_DYNAMIC_MINORS=y # # may also be needed; see USB_STORAGE Help for more information # -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -# CONFIG_USB_MON is not set +CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -1192,56 +1012,57 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set +CONFIG_USB_GADGET_PXA25X=y +CONFIG_USB_PXA25X=y +CONFIG_USB_PXA25X_SMALL=y +# CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_MQ11XX is not set # CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_S3C2410 is not set # CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set # CONFIG_USB_ZERO is not set -CONFIG_USB_ETH=y +CONFIG_USB_ETH=m # CONFIG_USB_ETH_RNDIS is not set # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set -# CONFIG_USB_G_CHAR is not set -# CONFIG_USB_PXA2XX_GPIO is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_UNSAFE_RESUME=y # -# MMC/SD Card support +# MMC/SD Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y -# CONFIG_MMC_PXA is not set -CONFIG_MMC_TMIO=y -# CONFIG_MMC_SAMCOP is not set +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # -# Real Time Clock +# MMC/SD Host Controller Drivers # +# CONFIG_MMC_PXA is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_NEW_LEDS is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set # # File systems @@ -1255,14 +1076,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1292,7 +1110,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1305,30 +1122,21 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1341,7 +1149,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1363,10 +1170,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=y @@ -1407,30 +1211,32 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y +# CONFIG_LATENCYTOP is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_DEBUG_USER is not set # @@ -1438,61 +1244,102 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set # -# Hardware crypto devices +# Compression # +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 747b9dedab8..dc8b40783d9 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -377,7 +377,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -395,7 +395,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91cap9_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -404,7 +404,7 @@ static struct platform_device at91cap9_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -445,7 +445,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91cap9_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index de19bee83f7..8ced9bc8209 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -369,7 +369,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -382,7 +382,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91rm9200_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -391,7 +391,7 @@ static struct platform_device at91rm9200_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned int csa; @@ -429,7 +429,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91rm9200_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 86cba4ac29b..cae5f52f127 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -284,7 +284,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -302,7 +302,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9260_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -311,7 +311,7 @@ static struct platform_device at91sam9260_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -373,7 +373,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9260_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index ec1891375df..483d436af22 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -199,7 +199,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -211,8 +211,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -221,7 +221,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -262,11 +262,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 8a81f76f020..9762b15f658 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -353,7 +353,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -371,7 +371,7 @@ static struct resource nand_resources[] = { }; static struct platform_device at91sam9263_nand_device = { - .name = "at91_nand", + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -380,7 +380,7 @@ static struct platform_device at91sam9263_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa, mode; @@ -421,7 +421,7 @@ void __init at91_add_device_nand(struct at91_nand_data *data) platform_device_register(&at91sam9263_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index ae28101e754..5f3094870ca 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -195,7 +195,7 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} * -------------------------------------------------------------------- */ #if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) -static struct at91_nand_data nand_data; +static struct atmel_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 @@ -212,8 +212,8 @@ static struct resource nand_resources[] = { } }; -static struct platform_device at91_nand_device = { - .name = "at91_nand", +static struct platform_device atmel_nand_device = { + .name = "atmel_nand", .id = -1, .dev = { .platform_data = &nand_data, @@ -222,7 +222,7 @@ static struct platform_device at91_nand_device = { .num_resources = ARRAY_SIZE(nand_resources), }; -void __init at91_add_device_nand(struct at91_nand_data *data) +void __init at91_add_device_nand(struct atmel_nand_data *data) { unsigned long csa; @@ -259,11 +259,11 @@ void __init at91_add_device_nand(struct at91_nand_data *data) at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ nand_data = *data; - platform_device_register(&at91_nand_device); + platform_device_register(&atmel_nand_device); } #else -void __init at91_add_device_nand(struct at91_nand_data *data) {} +void __init at91_add_device_nand(struct atmel_nand_data *data) {} #endif diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b22a1a00405..af2c33aff1a 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -142,7 +142,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cam60_nand_partition; } -static struct at91_nand_data __initdata cam60_nand_data = { +static struct atmel_nand_data __initdata cam60_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index 8a2a958639d..117cf6c9afc 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -181,7 +181,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return cap9adk_nand_partitions; } -static struct at91_nand_data __initdata cap9adk_nand_data = { +static struct atmel_nand_data __initdata cap9adk_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected @@ -330,10 +330,10 @@ static void __init cap9adk_board_init(void) /* Serial */ at91_add_device_serial(); /* USB Host */ - set_irq_type(AT91CAP9_ID_UHP, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UHP, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usbh(&cap9adk_usbh_data); /* USB HS */ - set_irq_type(AT91CAP9_ID_UDPHS, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_UDPHS, IRQ_TYPE_LEVEL_HIGH); at91_add_device_usba(&cap9adk_usba_udc_data); /* SPI */ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); @@ -350,7 +350,7 @@ static void __init cap9adk_board_init(void) /* I2C */ at91_add_device_i2c(NULL, 0); /* LCD Controller */ - set_irq_type(AT91CAP9_ID_LCDC, IRQT_HIGH); + set_irq_type(AT91CAP9_ID_LCDC, IRQ_TYPE_LEVEL_HIGH); at91_add_device_lcdc(&cap9adk_lcdc_data); /* AC97 */ at91_add_device_ac97(&cap9adk_ac97_data); diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-dk.c index dab958d2592..02a70b2f355 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-dk.c @@ -147,7 +147,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return dk_nand_partition; } -static struct at91_nand_data __initdata dk_nand_data = { +static struct atmel_nand_data __initdata dk_nand_data = { .ale = 22, .cle = 21, .det_pin = AT91_PIN_PB1, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index cb065febd95..082ed59365a 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -105,7 +105,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return kb9202_nand_partition; } -static struct at91_nand_data __initdata kb9202_nand_data = { +static struct atmel_nand_data __initdata kb9202_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not there diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 8f76af5e219..57a6221943e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -141,7 +141,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 4d1d9c77708..6a680795c3c 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -178,7 +178,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 08382c0df22..43dfbd0d543 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -183,7 +183,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 22, .cle = 21, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index b4cd5d0ed59..6605a098011 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -187,7 +187,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index b6a70fc735c..66e77bb2e07 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -96,7 +96,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return ek_nand_partition; } -static struct at91_nand_data __initdata ek_nand_data = { +static struct atmel_nand_data __initdata ek_nand_data = { .ale = 21, .cle = 22, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 7079050ab88..bbbfd06f5e0 100755..100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -180,7 +180,7 @@ static struct mtd_partition * __init nand_partitions(int size, int *num_partitio return yl9200_nand_partition; } -static struct at91_nand_data __initdata yl9200_nand_data = { +static struct atmel_nand_data __initdata yl9200_nand_data = { .ale = 6, .cle = 7, // .det_pin = ... not connected diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index 78a5cdb746d..ca87587b2b4 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -56,19 +56,19 @@ static int at91_aic_set_type(unsigned irq, unsigned type) unsigned int smr, srctype; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: srctype = AT91_AIC_SRCTYPE_HIGH; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: srctype = AT91_AIC_SRCTYPE_RISING; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else return -EINVAL; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: if ((irq == AT91_ID_FIQ) || is_extern_irq(irq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 1d7bca6aa44..5fed5760850 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -226,7 +226,7 @@ static void ep93xx_gpio_irq_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { gpio_int_type2[port] ^= port_mask; /* switch edge direction */ ep93xx_gpio_update_int_params(port); } @@ -240,7 +240,7 @@ static void ep93xx_gpio_irq_mask_ack(unsigned int irq) int port = line >> 3; int port_mask = 1 << (line & 7); - if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) + if ((irq_desc[irq].status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) gpio_int_type2[port] ^= port_mask; /* switch edge direction */ gpio_int_unmasked[port] &= ~port_mask; @@ -283,27 +283,27 @@ static int ep93xx_gpio_irq_type(unsigned int irq, unsigned int type) gpio_direction_input(gpio); switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: gpio_int_type1[port] |= port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_edge_irq; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] |= port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: gpio_int_type1[port] &= ~port_mask; gpio_int_type2[port] &= ~port_mask; desc->handle_irq = handle_level_irq; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: gpio_int_type1[port] |= port_mask; /* set initial polarity based on current input level */ if (gpio_get_value(gpio)) diff --git a/arch/arm/mach-imx/irq.c b/arch/arm/mach-imx/irq.c index e6695c4e623..e1b1f028b93 100644 --- a/arch/arm/mach-imx/irq.c +++ b/arch/arm/mach-imx/irq.c @@ -111,7 +111,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) reg = irq >> 5; bit = 1 << (irq % 32); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { /* Don't mess with enabled GPIOs using preconfigured edges or GPIOs set to alternate function during probe */ /* TODO: support probe */ @@ -120,7 +120,7 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) // return 0; // if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2))) // return 0; -// type = __IRQT_RISEDGE | __IRQT_FALEDGE; +// type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } GIUS(reg) |= bit; @@ -128,19 +128,19 @@ imx_gpio_irq_type(unsigned int _irq, unsigned int type) DEBUG_IRQ("setting type of irq %d to ", _irq); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); irq_type = 0x0; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); irq_type = 0x1; } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); irq_type = 0x3; } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); irq_type = 0x2; } diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c index 81cdc826720..daf28074134 100644 --- a/arch/arm/mach-ixp2000/core.c +++ b/arch/arm/mach-ixp2000/core.c @@ -329,19 +329,19 @@ static int ixp2000_GPIO_irq_type(unsigned int irq, unsigned int type) /* * Then, set the proper trigger type. */ - if (type & IRQT_FALLING) + if (type & IRQ_TYPE_EDGE_FALLING) GPIO_IRQ_falling_edge |= 1 << line; else GPIO_IRQ_falling_edge &= ~(1 << line); - if (type & IRQT_RISING) + if (type & IRQ_TYPE_EDGE_RISING) GPIO_IRQ_rising_edge |= 1 << line; else GPIO_IRQ_rising_edge &= ~(1 << line); - if (type & IRQT_LOW) + if (type & IRQ_TYPE_LEVEL_LOW) GPIO_IRQ_level_low |= 1 << line; else GPIO_IRQ_level_low &= ~(1 << line); - if (type & IRQT_HIGH) + if (type & IRQ_TYPE_LEVEL_HIGH) GPIO_IRQ_level_high |= 1 << line; else GPIO_IRQ_level_high &= ~(1 << line); diff --git a/arch/arm/mach-ixp23xx/core.c b/arch/arm/mach-ixp23xx/core.c index 5fea5a13293..df16a4eac49 100644 --- a/arch/arm/mach-ixp23xx/core.c +++ b/arch/arm/mach-ixp23xx/core.c @@ -126,23 +126,23 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type) { - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP23XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP23XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP23XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP23XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP23XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP23XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP23XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP23XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index f0f70ba1e46..896ff9f840d 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -110,8 +110,8 @@ static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) static void __init roadrunner_pci_preinit(void) { - set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_ROADRUNNER_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp23xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 3f867691d9f..c6e044befcc 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -30,10 +30,10 @@ void __init avila_pci_preinit(void) { - set_irq_type(IRQ_AVILA_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_AVILA_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index 3781b3db9f4..3947c506b4f 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -142,23 +142,23 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) return -EINVAL; switch (type){ - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; irq_type = IXP4XX_IRQ_EDGE; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; irq_type = IXP4XX_IRQ_LEVEL; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; irq_type = IXP4XX_IRQ_LEVEL; break; diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index ad2e5b97966..be4f4a208b9 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -27,8 +27,8 @@ void __init coyote_pci_preinit(void) { - set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQT_LOW); - set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQT_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index 9db7e1f4201..926d15f885f 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -25,12 +25,12 @@ void __init dsmg600_pci_preinit(void) { - set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW); - set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index f19f3f6feda..ca12a9ca083 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -25,9 +25,9 @@ void __init fsg_pci_preinit(void) { - set_irq_type(IRQ_FSG_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_FSG_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index 6abf568322d..afd1dc14e59 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -29,8 +29,8 @@ void __init gateway7001_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 49dec786880..20960704183 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -41,10 +41,10 @@ */ void __init gtwx5715_pci_preinit(void) { - set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQT_LOW); - set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQT_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW); + set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 40879600481..7d9bb4d2310 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -27,10 +27,10 @@ void __init ixdp425_pci_preinit(void) { - set_irq_type(IRQ_IXDP425_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_IXDP425_PCI_INTD, IRQT_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index d1e75b7dc3b..37d9f2e8f60 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -25,8 +25,8 @@ void __init ixdpg425_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO7, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index b8ebaf4a9c8..1088426fdce 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -24,11 +24,11 @@ void __init nas100d_pci_preinit(void) { - set_irq_type(IRQ_NAS100D_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTC, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTD, IRQT_LOW); - set_irq_type(IRQ_NAS100D_PCI_INTE, IRQT_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 04661fef97f..4429b8448b6 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -24,9 +24,9 @@ void __init nslu2_pci_preinit(void) { - set_irq_type(IRQ_NSLU2_PCI_INTA, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTB, IRQT_LOW); - set_irq_type(IRQ_NSLU2_PCI_INTC, IRQT_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 6588f2c758e..0f00feab67f 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -29,8 +29,8 @@ void __init wg302v2_pci_preinit(void) { - set_irq_type(IRQ_IXP4XX_GPIO8, IRQT_LOW); - set_irq_type(IRQ_IXP4XX_GPIO9, IRQT_LOW); + set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW); + set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW); ixp4xx_pci_preinit(); } diff --git a/arch/arm/mach-ks8695/irq.c b/arch/arm/mach-ks8695/irq.c index 4c3ab43e104..0b06941a1ee 100644 --- a/arch/arm/mach-ks8695/irq.c +++ b/arch/arm/mach-ks8695/irq.c @@ -72,21 +72,21 @@ static int ks8695_irq_set_type(unsigned int irqno, unsigned int type) ctrl = __raw_readl(KS8695_GPIO_VA + KS8695_IOPC); switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: mode = IOPC_TM_HIGH; level_triggered = 1; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: mode = IOPC_TM_LOW; level_triggered = 1; break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: mode = IOPC_TM_RISING; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: mode = IOPC_TM_FALLING; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: mode = IOPC_TM_EDGE; break; default: diff --git a/arch/arm/mach-netx/generic.c b/arch/arm/mach-netx/generic.c index fd7537f7d11..99d4fb19a08 100644 --- a/arch/arm/mach-netx/generic.c +++ b/arch/arm/mach-netx/generic.c @@ -99,19 +99,19 @@ netx_hif_irq_type(unsigned int _irq, unsigned int type) irq = _irq - NETX_IRQ_HIF_CHAINED(0); - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { DEBUG_IRQ("rising edges\n"); val |= (1 << 26) << irq; } - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { DEBUG_IRQ("falling edges\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_LOWLVL) { + if (type & IRQ_TYPE_LEVEL_LOW) { DEBUG_IRQ("low level\n"); val &= ~((1 << 26) << irq); } - if (type & __IRQT_HIGHLVL) { + if (type & IRQ_TYPE_LEVEL_HIGH) { DEBUG_IRQ("high level\n"); val |= (1 << 26) << irq; } diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index 845c66371ca..41f94f6fc15 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -288,7 +288,7 @@ static void __init osk_init_cf(void) return; } /* the CF I/O IRQ is really active-low */ - set_irq_type(OMAP_GPIO_IRQ(62), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(62), IRQ_TYPE_EDGE_FALLING); } static void __init osk_init_irq(void) @@ -483,7 +483,7 @@ static void __init osk_mistral_init(void) omap_cfg_reg(P20_1610_GPIO4); /* PENIRQ */ gpio_request(4, "ts_int"); gpio_direction_input(4); - set_irq_type(OMAP_GPIO_IRQ(4), IRQT_FALLING); + set_irq_type(OMAP_GPIO_IRQ(4), IRQ_TYPE_EDGE_FALLING); spi_register_board_info(mistral_boardinfo, ARRAY_SIZE(mistral_boardinfo)); @@ -494,7 +494,7 @@ static void __init osk_mistral_init(void) int ret = 0; gpio_direction_input(OMAP_MPUIO(2)); - set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(OMAP_MPUIO(2)), IRQ_TYPE_EDGE_RISING); #ifdef CONFIG_PM /* share the IRQ in case someone wants to use the * button for more than wakeup from system sleep. diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index e020c277460..34389b63b0e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -298,11 +298,11 @@ palmz71_powercable(int irq, void *dev_id) if (omap_get_gpio_datain(PALMZ71_USBDETECT_GPIO)) { printk(KERN_INFO "PM: Power cable connected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_FALLING); + IRQ_TYPE_EDGE_FALLING); } else { printk(KERN_INFO "PM: Power cable disconnected\n"); set_irq_type(OMAP_GPIO_IRQ(PALMZ71_USBDETECT_GPIO), - IRQT_RISING); + IRQ_TYPE_EDGE_RISING); } return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 5c00b3f39cd..8948d45a276 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -186,10 +186,10 @@ static void __init voiceblue_init(void) omap_request_gpio(13); omap_request_gpio(14); omap_request_gpio(15); - set_irq_type(OMAP_GPIO_IRQ(12), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(14), IRQT_RISING); - set_irq_type(OMAP_GPIO_IRQ(15), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(OMAP_GPIO_IRQ(15), IRQ_TYPE_EDGE_RISING); platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); omap_board_config = voiceblue_config; diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c index 0cf62ef5ecb..d963125ed75 100644 --- a/arch/arm/mach-omap1/fpga.c +++ b/arch/arm/mach-omap1/fpga.c @@ -181,7 +181,7 @@ void omap1510_fpga_init_irq(void) */ omap_request_gpio(13); omap_set_gpio_direction(13, 1); - set_irq_type(OMAP_GPIO_IRQ(13), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(13), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(OMAP1510_INT_FPGA, innovator_fpga_IRQ_demux); } diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 620fa0f120e..870b34972d3 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -337,17 +337,17 @@ static void __init apollon_sw_init(void) omap_request_gpio(SW_DOWN_GPIO58); omap_set_gpio_direction(SW_DOWN_GPIO58, 1); - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, IRQF_SHARED, "enter sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, IRQF_SHARED, "up sw", &apollon_sw_interrupt)) return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQT_RISING); + set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, IRQF_SHARED, "down sw", &apollon_sw_interrupt)) diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 88405e74e5e..40a0bee4fbb 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -213,7 +213,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -226,7 +226,7 @@ void __init db88f5281_pci_preinit(void) pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "db88f5281_pci_preinit faield " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index e2a0084ab4a..9ae3f6dc783 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -91,27 +91,27 @@ static int orion5x_gpio_set_irq_type(u32 irq, u32 type) desc = irq_desc + irq; switch (type) { - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: desc->handle_irq = handle_level_irq; desc->status |= IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_clrbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; orion5x_setbits(GPIO_IN_POL, (1 << pin)); break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: desc->handle_irq = handle_edge_irq; desc->status &= ~IRQ_LEVEL; /* @@ -156,7 +156,7 @@ static void orion5x_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (cause & (1 << pin)) { irq = gpio_to_irq(pin); desc = irq_desc + irq; - if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQT_BOTHEDGE) { + if ((desc->status & IRQ_TYPE_SENSE_MASK) == IRQ_TYPE_EDGE_BOTH) { /* Swap polarity (race with GPIO line) */ u32 polarity = readl(GPIO_IN_POL); polarity ^= 1 << pin; diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 10ae6286426..2a46d27209c 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -148,7 +148,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN; if (gpio_request(pin, "PCI IntA") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); @@ -161,7 +161,7 @@ void __init rd88f5182_pci_preinit(void) pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN; if (gpio_request(pin, "PCI IntB") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "rd88f5182_pci_preinit faield to " "set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index a9cef9703d5..f270ada2def 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -117,7 +117,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN; if (gpio_request(pin, "PCI Int1") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed to " "set_irq_type pin %d\n", pin); @@ -131,7 +131,7 @@ void __init qnap_ts209_pci_preinit(void) pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN; if (gpio_request(pin, "PCI Int2") == 0) { if (gpio_direction_input(pin) == 0) { - set_irq_type(gpio_to_irq(pin), IRQT_LOW); + set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW); } else { printk(KERN_ERR "qnap_ts209_pci_preinit failed " "to set_irq_type pin %d\n", pin); diff --git a/arch/arm/mach-pnx4008/irq.c b/arch/arm/mach-pnx4008/irq.c index 968d0b02759..5ed67e1947a 100644 --- a/arch/arm/mach-pnx4008/irq.c +++ b/arch/arm/mach-pnx4008/irq.c @@ -56,28 +56,28 @@ static void pnx4008_mask_ack_irq(unsigned int irq) static int pnx4008_set_irq_type(unsigned int irq, unsigned int type) { switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /*rising edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: __raw_writel(__raw_readl(INTC_ATR(irq)) | INTC_BIT(irq), INTC_ATR(irq)); /*edge sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*falling edge */ set_irq_handler(irq, handle_edge_irq); break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) & ~INTC_BIT(irq), INTC_APR(irq)); /*low level */ set_irq_handler(irq, handle_level_irq); break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: __raw_writel(__raw_readl(INTC_ATR(irq)) & ~INTC_BIT(irq), INTC_ATR(irq)); /*level sensitive */ __raw_writel(__raw_readl(INTC_APR(irq)) | INTC_BIT(irq), INTC_APR(irq)); /* high level */ set_irq_handler(irq, handle_level_irq); break; - /* IRQT_BOTHEDGE is not supported */ + /* IRQ_TYPE_EDGE_BOTH is not supported */ default: printk(KERN_ERR "PNX4008 IRQ: Unsupported irq type %d\n", type); return -1; diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x270-pci.c index bcf0cde6ccc..31f5bd411ce 100644 --- a/arch/arm/mach-pxa/cm-x270-pci.c +++ b/arch/arm/mach-pxa/cm-x270-pci.c @@ -71,7 +71,7 @@ void __cmx270_pci_init_irq(int irq_gpio) cmx270_it8152_irq_gpio = irq_gpio; - set_irq_type(gpio_to_irq(irq_gpio), IRQT_RISING); + set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx270_it8152_irq_demux); } diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index cc1c4fa0614..8d1ab54e7b2 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -113,7 +113,7 @@ static void __init lpd270_init_irq(void) set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index ac26423cd20..af7375bb46a 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -152,7 +152,7 @@ static void __init lubbock_init_irq(void) } set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 851ec2d9b69..c8e38b5ff1c 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -191,7 +191,7 @@ static void __init mainstone_init_irq(void) MST_INTSETCLR = 0; set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler); - set_irq_type(IRQ_GPIO(0), IRQT_FALLING); + set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING); } #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 34cd585075b..23e9b928330 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -146,18 +146,18 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH); if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING); if (sharpsl_pm.machinfo->gpio_fatal) { if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING); } if (sharpsl_pm.machinfo->batfull_irq) @@ -166,7 +166,7 @@ void sharpsl_pm_pxa_init(void) if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) { dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull)); } - else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING); + else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING); } } diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index dee7bf36f01..12811b7aea0 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -122,7 +122,7 @@ static struct resource dm9000_resources[] = { [2] = { .start = TRIZEPS4_ETH_IRQ, .end = TRIZEPS4_ETH_IRQ, - .flags = (IORESOURCE_IRQ | IRQT_RISING), + .flags = (IORESOURCE_IRQ | IRQ_TYPE_EDGE_RISING), }, }; diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index 31afe50d7cd..56d3ee01baa 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -96,7 +96,7 @@ static struct resource cerf_flash_resource = { static void __init cerf_init_irq(void) { sa1100_init_irq(); - set_irq_type(CERF_ETH_IRQ, IRQT_RISING); + set_irq_type(CERF_ETH_IRQ, IRQ_TYPE_EDGE_RISING); } static struct map_desc cerf_io_desc[] __initdata = { diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c index 8473c37b77d..b34ff42bbd7 100644 --- a/arch/arm/mach-sa1100/h3600.c +++ b/arch/arm/mach-sa1100/h3600.c @@ -834,7 +834,7 @@ static void __init h3800_init_irq(void) set_irq_chip(irq, &h3800_gpio_irqchip); } #endif - set_irq_type(IRQ_GPIO_H3800_ASIC, IRQT_RISING); + set_irq_type(IRQ_GPIO_H3800_ASIC, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO_H3800_ASIC, h3800_IRQ_demux); } diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c index fa0403af7ee..c5e438b12ec 100644 --- a/arch/arm/mach-sa1100/irq.c +++ b/arch/arm/mach-sa1100/irq.c @@ -46,17 +46,17 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type) else mask = GPIO11_27_MASK(irq); - if (type == IRQT_PROBE) { + if (type == IRQ_TYPE_PROBE) { if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask) return 0; - type = __IRQT_RISEDGE | __IRQT_FALEDGE; + type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; } - if (type & __IRQT_RISEDGE) { + if (type & IRQ_TYPE_EDGE_RISING) { GPIO_IRQ_rising_edge |= mask; } else GPIO_IRQ_rising_edge &= ~mask; - if (type & __IRQT_FALEDGE) { + if (type & IRQ_TYPE_EDGE_FALLING) { GPIO_IRQ_falling_edge |= mask; } else GPIO_IRQ_falling_edge &= ~mask; diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 9f1ed150930..967a48454f6 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -151,7 +151,7 @@ static int __devinit neponset_probe(struct platform_device *dev) /* * Install handler for GPIO25. */ - set_irq_type(IRQ_GPIO25, IRQT_RISING); + set_irq_type(IRQ_GPIO25, IRQ_TYPE_EDGE_RISING); set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler); /* diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c index c7bf7e0038f..69a71f11625 100644 --- a/arch/arm/mach-sa1100/pleb.c +++ b/arch/arm/mach-sa1100/pleb.c @@ -143,7 +143,7 @@ static void __init pleb_map_io(void) GPDR &= ~GPIO_ETH0_IRQ; - set_irq_type(GPIO_ETH0_IRQ, IRQT_FALLING); + set_irq_type(GPIO_ETH0_IRQ, IRQ_TYPE_EDGE_FALLING); } MACHINE_START(PLEB, "PLEB") diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index fbfa2605844..a8ec97b4752 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -37,7 +37,7 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) pgd_t *pgd; pmd_t *pmd; pte_t *pte, entry; - int ret = 0; + int ret; pgd = pgd_offset(vma->vm_mm, address); if (pgd_none(*pgd)) @@ -55,15 +55,19 @@ static int adjust_pte(struct vm_area_struct *vma, unsigned long address) entry = *pte; /* + * If this page is present, it's actually being shared. + */ + ret = pte_present(entry); + + /* * If this page isn't present, or is already setup to * fault (ie, is old), we can safely ignore any issues. */ - if (pte_present(entry) && pte_val(entry) & shared_pte_mask) { + if (ret && pte_val(entry) & shared_pte_mask) { flush_cache_page(vma, address, pte_pfn(entry)); pte_val(entry) &= ~shared_pte_mask; set_pte_at(vma->vm_mm, address, pte, entry); flush_tlb_page(vma, address); - ret = 1; } pte_unmap(pte); return ret; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index 4a7736717d8..318b268f938 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -73,19 +73,19 @@ static int gpio_set_irq_type(u32 irq, u32 type) void __iomem *reg = port->base; switch (type) { - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: edge = GPIO_INT_RISE_EDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: edge = GPIO_INT_FALL_EDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: edge = GPIO_INT_LOW_LEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: edge = GPIO_INT_HIGH_LEV; break; - default: /* this includes IRQT_BOTHEDGE */ + default: /* this includes IRQ_TYPE_EDGE_BOTH */ return -EINVAL; } diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index d8e9c2c3f0f..63e094342ef 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -517,13 +517,13 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, u32 gpio_bit = 1 << gpio; MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & __IRQT_LOWLVL); + trigger & IRQ_TYPE_LEVEL_LOW); MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & __IRQT_HIGHLVL); + trigger & IRQ_TYPE_LEVEL_HIGH); MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & __IRQT_RISEDGE); + trigger & IRQ_TYPE_EDGE_RISING); MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & __IRQT_FALEDGE); + trigger & IRQ_TYPE_EDGE_FALLING); if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { if (trigger != 0) @@ -555,9 +555,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_MPUIO: reg += OMAP_MPUIO_GPIO_INT_EDGE; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -567,9 +567,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_1510: reg += OMAP1510_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -584,9 +584,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) gpio &= 0x07; l = __raw_readl(reg); l &= ~(3 << (gpio << 1)); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 2 << (gpio << 1); - if (trigger & __IRQT_FALEDGE) + if (trigger & IRQ_TYPE_EDGE_FALLING) l |= 1 << (gpio << 1); if (trigger) /* Enable wake-up during idle for dynamic tick */ @@ -599,9 +599,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) case METHOD_GPIO_730: reg += OMAP730_GPIO_INT_CONTROL; l = __raw_readl(reg); - if (trigger & __IRQT_RISEDGE) + if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; - else if (trigger & __IRQT_FALEDGE) + else if (trigger & IRQ_TYPE_EDGE_FALLING) l &= ~(1 << gpio); else goto bad; @@ -887,7 +887,7 @@ static void _reset_gpio(struct gpio_bank *bank, int gpio) _set_gpio_direction(bank, get_gpio_index(gpio), 1); _set_gpio_irqenable(bank, gpio, 0); _clear_gpio_irqstatus(bank, gpio); - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); } /* Use disable_irq_wake() and enable_irq_wake() functions from drivers */ @@ -924,7 +924,7 @@ int omap_request_gpio(int gpio) /* Set trigger to none. You need to enable the desired trigger with * request_irq() or set_irq_type(). */ - _set_gpio_triggering(bank, get_gpio_index(gpio), IRQT_NOEDGE); + _set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE); #ifdef CONFIG_ARCH_OMAP15XX if (bank->method == METHOD_GPIO_1510) { diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 5e28c217b8c..0af3872fb76 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,7 @@ config PLAT_S3C24XX depends on ARCH_S3C2410 default y if ARCH_S3C2410 select NO_IOPORT - select HAVE_GPIO_LIB + select ARCH_REQUIRE_GPIOLIB help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 60f162dc4fa..8c5e656d5d8 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1304,7 +1304,7 @@ struct sysdev_class dma_sysclass = { /* kmem cache implementation */ -static void s3c2410_dma_cache_ctor(struct kmem_cache *c, void *p) +static void s3c2410_dma_cache_ctor(void *p) { memset(p, 0, sizeof(struct s3c2410_dma_buf)); } diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index ae2c5d7efc9..001436c04b1 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -292,27 +292,27 @@ s3c_irqext_type(unsigned int irq, unsigned int type) /* Set the external interrupt to pointed trigger type */ switch (type) { - case IRQT_NOEDGE: + case IRQ_TYPE_NONE: printk(KERN_WARNING "No edge setting!\n"); break; - case IRQT_RISING: + case IRQ_TYPE_EDGE_RISING: newvalue = S3C2410_EXTINT_RISEEDGE; break; - case IRQT_FALLING: + case IRQ_TYPE_EDGE_FALLING: newvalue = S3C2410_EXTINT_FALLEDGE; break; - case IRQT_BOTHEDGE: + case IRQ_TYPE_EDGE_BOTH: newvalue = S3C2410_EXTINT_BOTHEDGE; break; - case IRQT_LOW: + case IRQ_TYPE_LEVEL_LOW: newvalue = S3C2410_EXTINT_LOWLEV; break; - case IRQT_HIGH: + case IRQ_TYPE_LEVEL_HIGH: newvalue = S3C2410_EXTINT_HILEV; break; diff --git a/arch/avr32/boards/atstk1000/Kconfig b/arch/avr32/boards/atstk1000/Kconfig index af90b00100f..8dc48214f0b 100644 --- a/arch/avr32/boards/atstk1000/Kconfig +++ b/arch/avr32/boards/atstk1000/Kconfig @@ -18,6 +18,10 @@ config BOARD_ATSTK1004 bool "ATSTK1004" select CPU_AT32AP7002 +config BOARD_ATSTK1006 + bool "ATSTK1006" + select CPU_AT32AP7000 + endchoice diff --git a/arch/avr32/boards/atstk1000/Makefile b/arch/avr32/boards/atstk1000/Makefile index beead86462e..edecee03742 100644 --- a/arch/avr32/boards/atstk1000/Makefile +++ b/arch/avr32/boards/atstk1000/Makefile @@ -2,3 +2,4 @@ obj-y += setup.o flash.o obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o +obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c index e11659b732f..8538ba75ef9 100644 --- a/arch/avr32/boards/atstk1000/atstk1002.c +++ b/arch/avr32/boards/atstk1000/atstk1002.c @@ -1,7 +1,7 @@ /* - * ATSTK1002 daughterboard-specific init code + * ATSTK1002/ATSTK1006 daughterboard-specific init code * - * Copyright (C) 2005-2006 Atmel Corporation + * Copyright (C) 2005-2007 Atmel Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -21,6 +21,8 @@ #include <asm/io.h> #include <asm/setup.h> +#include <asm/atmel-mci.h> + #include <asm/arch/at32ap700x.h> #include <asm/arch/board.h> #include <asm/arch/init.h> @@ -35,6 +37,74 @@ unsigned long at32_board_osc_rates[3] = { [2] = 12000000, /* 12 MHz on osc1 */ }; +/* + * The ATSTK1006 daughterboard is very similar to the ATSTK1002. Both + * have the AT32AP7000 chip on board; the difference is that the + * STK1006 has 128 MB SDRAM (the STK1002 uses the 8 MB SDRAM chip on + * the STK1000 motherboard) and 256 MB NAND flash (the STK1002 has + * none.) + * + * The RAM difference is handled by the boot loader, so the only + * difference we end up handling here is the NAND flash. + */ +#ifdef CONFIG_BOARD_ATSTK1006 +#include <linux/mtd/partitions.h> +#include <asm/arch/smc.h> + +static struct smc_timing nand_timing __initdata = { + .ncs_read_setup = 0, + .nrd_setup = 10, + .ncs_write_setup = 0, + .nwe_setup = 10, + + .ncs_read_pulse = 30, + .nrd_pulse = 15, + .ncs_write_pulse = 30, + .nwe_pulse = 15, + + .read_cycle = 30, + .write_cycle = 30, + + .ncs_read_recover = 0, + .nrd_recover = 15, + .ncs_write_recover = 0, + /* WE# high -> RE# low min 60 ns */ + .nwe_recover = 50, +}; + +static struct smc_config nand_config __initdata = { + .bus_width = 1, + .nrd_controlled = 1, + .nwe_controlled = 1, + .nwait_mode = 0, + .byte_write = 0, + .tdf_cycles = 2, + .tdf_mode = 0, +}; + +static struct mtd_partition nand_partitions[] = { + { + .name = "main", + .offset = 0x00000000, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition *nand_part_info(int size, int *num_partitions) +{ + *num_partitions = ARRAY_SIZE(nand_partitions); + return nand_partitions; +} + +struct atmel_nand_data atstk1006_nand_data __initdata = { + .cle = 21, + .ale = 22, + .rdy_pin = GPIO_PIN_PB(30), + .enable_pin = GPIO_PIN_PB(29), + .partition_info = nand_part_info, +}; +#endif + struct eth_addr { u8 addr[6]; }; @@ -192,6 +262,21 @@ void __init setup_board(void) at32_setup_serial_console(0); } +#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM + +/* MMC card detect requires MACB0 *NOT* be used */ +#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM +static struct mci_platform_data __initdata mci0_data = { + .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */ + .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */ +}; +#define MCI_PDATA &mci0_data +#else +#define MCI_PDATA NULL +#endif /* SW6 for sd{cd,wp} routing */ + +#endif /* SW2 for MMC signal routing */ + static int __init atstk1002_init(void) { /* @@ -218,6 +303,12 @@ static int __init atstk1002_init(void) at32_add_system_devices(); +#ifdef CONFIG_BOARD_ATSTK1006 + smc_set_timing(&nand_config, &nand_timing); + smc_set_configuration(3, &nand_config); + at32_add_device_nand(0, &atstk1006_nand_data); +#endif + #ifdef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM at32_add_device_usart(1); #else @@ -235,7 +326,7 @@ static int __init atstk1002_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM - at32_add_device_mci(0, NULL); + at32_add_device_mci(0, MCI_PDATA); #endif #ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM set_hw_addr(at32_add_device_eth(1, ð_data[1])); diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c index ea109f435a8..591fc73b554 100644 --- a/arch/avr32/boards/atstk1000/atstk1003.c +++ b/arch/avr32/boards/atstk1000/atstk1003.c @@ -154,7 +154,7 @@ static int __init atstk1003_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0); + at32_add_device_mci(0, NULL); #endif at32_add_device_usba(0, NULL); #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c index c7236df74d7..d9c5e0a2125 100644 --- a/arch/avr32/boards/atstk1000/atstk1004.c +++ b/arch/avr32/boards/atstk1000/atstk1004.c @@ -137,7 +137,7 @@ static int __init atstk1004_init(void) at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info)); #endif #ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM - at32_add_device_mci(0); + at32_add_device_mci(0, NULL); #endif at32_add_device_lcdc(0, &atstk1000_lcdc_data, fbmem_start, fbmem_size, 0); diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index abd954fb7ba..7e7f32771ae 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -43,6 +43,9 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evdev = dev_id; + if (unlikely(!(intc_get_pending(0) & 1))) + return IRQ_NONE; + /* * Disable the interrupt until the clockevent subsystem * reprograms it. @@ -55,7 +58,8 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) static struct irqaction timer_irqaction = { .handler = timer_interrupt, - .flags = IRQF_TIMER | IRQF_DISABLED, + /* Oprofile uses the same irq as the timer, so allow it to be shared */ + .flags = IRQF_TIMER | IRQF_DISABLED | IRQF_SHARED, .name = "avr32_comparator", }; diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index 604f44f5dd1..1617048c86c 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/usb/atmel_usba_udc.h> @@ -1285,7 +1286,6 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) { struct mci_platform_data _data; struct platform_device *pdev; - struct dw_dma_slave *dws; if (id != 0) return NULL; @@ -1300,7 +1300,9 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) if (!data) { data = &_data; - memset(data, 0, sizeof(struct mci_platform_data)); + memset(data, -1, sizeof(struct mci_platform_data)); + data->detect_pin = GPIO_PIN_NONE; + data->wp_pin = GPIO_PIN_NONE; } if (platform_device_add_data(pdev, data, @@ -1314,12 +1316,10 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data) select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */ - if (data) { - if (data->detect_pin != GPIO_PIN_NONE) - at32_select_gpio(data->detect_pin, 0); - if (data->wp_pin != GPIO_PIN_NONE) - at32_select_gpio(data->wp_pin, 0); - } + if (gpio_is_valid(data->detect_pin)) + at32_select_gpio(data->detect_pin, 0); + if (gpio_is_valid(data->wp_pin)) + at32_select_gpio(data->wp_pin, 0); atmel_mci0_pclk.dev = &pdev->dev; @@ -1853,11 +1853,11 @@ at32_add_device_cf(unsigned int id, unsigned int extint, if (at32_init_ide_or_cf(pdev, data->cs, extint)) goto fail; - if (data->detect_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->detect_pin)) at32_select_gpio(data->detect_pin, AT32_GPIOF_DEGLITCH); - if (data->reset_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->reset_pin)) at32_select_gpio(data->reset_pin, 0); - if (data->vcc_pin != GPIO_PIN_NONE) + if (gpio_is_valid(data->vcc_pin)) at32_select_gpio(data->vcc_pin, 0); /* READY is used as extint, so we can't select it as gpio */ @@ -1871,6 +1871,58 @@ fail: #endif /* -------------------------------------------------------------------- + * NAND Flash / SmartMedia + * -------------------------------------------------------------------- */ +static struct resource smc_cs3_resource[] __initdata = { + { + .start = 0x0c000000, + .end = 0x0fffffff, + .flags = IORESOURCE_MEM, + }, { + .start = 0xfff03c00, + .end = 0xfff03fff, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device *__init +at32_add_device_nand(unsigned int id, struct atmel_nand_data *data) +{ + struct platform_device *pdev; + + if (id != 0 || !data) + return NULL; + + pdev = platform_device_alloc("atmel_nand", id); + if (!pdev) + goto fail; + + if (platform_device_add_resources(pdev, smc_cs3_resource, + ARRAY_SIZE(smc_cs3_resource))) + goto fail; + + if (platform_device_add_data(pdev, data, + sizeof(struct atmel_nand_data))) + goto fail; + + set_ebi_sfr_bits(HMATRIX_BIT(CS3A)); + if (data->enable_pin) + at32_select_gpio(data->enable_pin, + AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH); + if (data->rdy_pin) + at32_select_gpio(data->rdy_pin, 0); + if (data->det_pin) + at32_select_gpio(data->det_pin, 0); + + platform_device_add(pdev); + return pdev; + +fail: + platform_device_put(pdev); + return NULL; +} + +/* -------------------------------------------------------------------- * AC97C * -------------------------------------------------------------------- */ static struct resource atmel_ac97c0_resource[] __initdata = { @@ -1885,9 +1937,11 @@ static struct clk atmel_ac97c0_pclk = { .index = 10, }; -struct platform_device *__init at32_add_device_ac97c(unsigned int id) +struct platform_device *__init +at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data) { struct platform_device *pdev; + struct ac97c_platform_data _data; if (id != 0) return NULL; @@ -1898,19 +1952,37 @@ struct platform_device *__init at32_add_device_ac97c(unsigned int id) if (platform_device_add_resources(pdev, atmel_ac97c0_resource, ARRAY_SIZE(atmel_ac97c0_resource))) - goto err_add_resources; + goto fail; - select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */ - select_peripheral(PB(21), PERIPH_B, 0); /* SDO */ - select_peripheral(PB(22), PERIPH_B, 0); /* SDI */ - select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */ + if (!data) { + data = &_data; + memset(data, 0, sizeof(struct ac97c_platform_data)); + data->reset_pin = GPIO_PIN_NONE; + } + + data->dma_rx_periph_id = 3; + data->dma_tx_periph_id = 4; + data->dma_controller_id = 0; + + if (platform_device_add_data(pdev, data, + sizeof(struct ac97c_platform_data))) + goto fail; + + select_peripheral(PB(20), PERIPH_B, 0); /* SDO */ + select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */ + select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */ + select_peripheral(PB(23), PERIPH_B, 0); /* SDI */ + + /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */ + if (data->reset_pin != GPIO_PIN_NONE) + at32_select_gpio(data->reset_pin, 0); atmel_ac97c0_pclk.dev = &pdev->dev; platform_device_add(pdev); return pdev; -err_add_resources: +fail: platform_device_put(pdev); return NULL; } diff --git a/arch/avr32/mach-at32ap/hsmc.c b/arch/avr32/mach-at32ap/hsmc.c index fa427ed4278..b2d9bc61a35 100644 --- a/arch/avr32/mach-at32ap/hsmc.c +++ b/arch/avr32/mach-at32ap/hsmc.c @@ -278,4 +278,4 @@ static int __init hsmc_init(void) { return platform_driver_register(&hsmc_driver); } -arch_initcall(hsmc_init); +core_initcall(hsmc_init); diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 3c85fdaa948..fa92ff6d95f 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -38,45 +38,6 @@ EXPORT_SYMBOL(empty_zero_page); */ unsigned long mmu_context_cache = NO_CONTEXT; -void show_mem(void) -{ - int total = 0, reserved = 0, cached = 0; - int slab = 0, free = 0, shared = 0; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - - for_each_online_pgdat(pgdat) { - struct page *page, *end; - - page = pgdat->node_mem_map; - end = page + pgdat->node_spanned_pages; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - page++; - } while (page < end); - } - - printk ("%d pages of RAM\n", total); - printk ("%d free pages\n", free); - printk ("%d reserved pages\n", reserved); - printk ("%d slab pages\n", slab); - printk ("%d pages shared\n", shared); - printk ("%d pages swap cached\n", cached); -} - /* * paging_init() sets up the page tables * diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index b83b8ef84e9..5a097c46bc4 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -234,7 +234,7 @@ config MEM_MT48LC16M16A2TG_75 bool depends on (BFIN533_EZKIT || BFIN561_EZKIT \ || BFIN533_BLUETECHNIX_CM || BFIN537_BLUETECHNIX_CM \ - || H8606_HVSISTEMAS) + || H8606_HVSISTEMAS || BFIN527_BLUETECHNIX_CM) default y config MEM_MT48LC32M8A2_75 @@ -310,25 +310,6 @@ config BFIN_KERNEL_CLOCK are also not changed, and the Bootloader does 100% of the hardware configuration. -config MEM_SIZE - int "SDRAM Memory Size in MBytes" - depends on BFIN_KERNEL_CLOCK - default 64 - -config MEM_ADD_WIDTH - int "Memory Address Width" - depends on BFIN_KERNEL_CLOCK - depends on (!BF54x) - range 8 11 - default 9 if BFIN533_EZKIT - default 9 if BFIN561_EZKIT - default 9 if H8606_HVSISTEMAS - default 10 if BFIN527_EZKIT - default 10 if BFIN537_STAMP - default 11 if BFIN533_STAMP - default 10 if PNAV10 - default 10 if BFIN532_IP0X - config PLL_BYPASS bool "Bypass PLL" depends on BFIN_KERNEL_CLOCK @@ -349,8 +330,7 @@ config VCO_MULT default "45" if BFIN533_STAMP default "20" if (BFIN537_STAMP || BFIN527_EZKIT || BFIN548_EZKIT || BFIN548_BLUETECHNIX_CM) default "22" if BFIN533_BLUETECHNIX_CM - default "20" if BFIN537_BLUETECHNIX_CM - default "20" if BFIN561_BLUETECHNIX_CM + default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT default "16" if H8606_HVSISTEMAS help @@ -390,7 +370,7 @@ config SCLK_DIV config MAX_MEM_SIZE int "Max SDRAM Memory Size in MBytes" - depends on !BFIN_KERNEL_CLOCK && !MPU + depends on !MPU default 512 help This is the max memory size that the kernel will create CPLB @@ -748,14 +728,6 @@ config BFIN_WT endchoice -config L1_MAX_PIECE - int "Set the max L1 SRAM pieces" - default 16 - help - Set the max memory pieces for the L1 SRAM allocation algorithm. - Min value is 16. Max value is 1024. - - config MPU bool "Enable the memory protection unit (EXPERIMENTAL)" default n @@ -899,7 +871,7 @@ config ARCH_SUSPEND_POSSIBLE depends on !SMP choice - prompt "Default Power Saving Mode" + prompt "Standby Power Saving Mode" depends on PM default PM_BFIN_SLEEP_DEEPER config PM_BFIN_SLEEP_DEEPER @@ -918,6 +890,8 @@ config PM_BFIN_SLEEP_DEEPER normal during Sleep Deeper, due to the reduced SCLK frequency. When in the sleep mode, system DMA access to L1 memory is not supported. + If unsure, select "Sleep Deeper". + config PM_BFIN_SLEEP bool "Sleep" help @@ -925,15 +899,17 @@ config PM_BFIN_SLEEP dissipation by disabling the clock to the processor core (CCLK). The PLL and system clock (SCLK), however, continue to operate in this mode. Typically an external event or RTC activity will wake - up the processor. When in the sleep mode, - system DMA access to L1 memory is not supported. + up the processor. When in the sleep mode, system DMA access to L1 + memory is not supported. + + If unsure, select "Sleep Deeper". endchoice config PM_WAKEUP_BY_GPIO - bool "Cause Wakeup Event by GPIO" + bool "Allow Wakeup from Standby by GPIO" config PM_WAKEUP_GPIO_NUMBER - int "Wakeup GPIO number" + int "GPIO number" range 0 47 depends on PM_WAKEUP_BY_GPIO default 2 if BFIN537_STAMP @@ -954,6 +930,58 @@ config PM_WAKEUP_GPIO_POLAR_EDGE_B bool "Both EDGE" endchoice +comment "Possible Suspend Mem / Hibernate Wake-Up Sources" + depends on PM + +config PM_BFIN_WAKE_RTC + bool "Allow Wake-Up from RESET and on-chip RTC" + depends on PM + default n + help + Enable RTC Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_PH6 + bool "Allow Wake-Up from on-chip PHY or PH6 GP" + depends on PM && (BF52x || BF534 || BF536 || BF537) + default n + help + Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_CAN + bool "Allow Wake-Up from on-chip CAN0/1" + depends on PM && (BF54x || BF534 || BF536 || BF537) + default n + help + Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_GP + bool "Allow Wake-Up from GPIOs" + depends on PM && BF54x + default n + help + Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_USB + bool "Allow Wake-Up from on-chip USB" + depends on PM && (BF54x || BF52x) + default n + help + Enable USB Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_KEYPAD + bool "Allow Wake-Up from on-chip Keypad" + depends on PM && BF54x + default n + help + Enable Keypad Wake-Up (Voltage Regulator Power-Up) + +config PM_BFIN_WAKE_ROTARY + bool "Allow Wake-Up from on-chip Rotary" + depends on PM && BF54x + default n + help + Enable Rotary Wake-Up (Voltage Regulator Power-Up) + endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/Kconfig.debug b/arch/blackfin/Kconfig.debug index c61bdebb997..c468624d55f 100644 --- a/arch/blackfin/Kconfig.debug +++ b/arch/blackfin/Kconfig.debug @@ -154,13 +154,6 @@ config EARLY_PRINTK all of this lives in the init section and is thrown away after the kernel boots completely. -config DUAL_CORE_TEST_MODULE - tristate "Dual Core Test Module" - depends on (BF561) - default n - help - Say Y here to build-in dual core test module for dual core test. - config CPLB_INFO bool "Display the CPLB information" help diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index 3cbe16caad4..9564731ad3a 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -6,8 +6,9 @@ # for more details. # - -CROSS_COMPILE ?= bfin-uclinux- +ifeq ($(CROSS_COMPILE),) +CROSS_COMPILE := bfin-uclinux- +endif LDFLAGS_vmlinux := -X OBJCOPYFLAGS := -O binary -R .note -R .comment -S GZFLAGS := -9 diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index 5e6fb9d8e50..66854a83c0d 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -1,7 +1,6 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.24.7 -# Fri May 16 10:02:29 2008 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -290,7 +289,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_VIRT_TO_BUS=y -# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_GPTIMERS=y CONFIG_BFIN_DMA_5XX=y # CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set @@ -430,7 +429,58 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR0=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -689,8 +739,11 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set -# CONFIG_VT is not set +CONFIG_SIMPLE_GPIO=m +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -872,8 +925,36 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +CONFIG_FB_BFIN_T350MCQB=y +# CONFIG_FB_BFIN_7393 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +CONFIG_LCD_LTV350QV=m +CONFIG_BACKLIGHT_CLASS_DEVICE=m +# CONFIG_BACKLIGHT_CORGI is not set # # Display device support @@ -881,9 +962,99 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DISPLAY_SUPPORT is not set # +# Console display driver support +# +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +# CONFIG_LOGO_LINUX_CLUT224 is not set +# CONFIG_LOGO_BLACKFIN_VGA16 is not set +CONFIG_LOGO_BLACKFIN_CLUT224=y + +# # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# SPI devices +# + +# +# ALSA Blackfin devices +# +# CONFIG_SND_BLACKFIN_AD1836 is not set +# CONFIG_SND_BLACKFIN_AD1836_TDM is not set +# CONFIG_SND_BLACKFIN_AD1836_I2S is not set +# CONFIG_SND_BLACKFIN_AD1836_MULSUB is not set +# CONFIG_SND_BLACKFIN_AD1836_5P1 is not set +# CONFIG_SND_BFIN_AD73311 is not set +# CONFIG_SND_BFIN_AD73322 is not set + +# +# USB devices +# +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_CAIAQ is not set + +# +# System on Chip audio support +# +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_BF5XX_SOC_I2S=m +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +CONFIG_SND_BF5XX_SOC_SSM2602=m +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# +# SoC Audio support for SuperH +# +CONFIG_SND_SOC_SSM2602=m +# CONFIG_SND_SOC_SSM2602_SPI is not set +CONFIG_SND_SOC_AD1980=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 8d817ba0194..6bc11db1269 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_BFIN533_EZKIT=y # CONFIG_BFIN533_STAMP is not set # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set # CONFIG_GENERIC_BF533_BOARD is not set # @@ -189,12 +180,14 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=27000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -208,13 +201,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -250,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -293,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -321,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -367,6 +364,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -393,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -428,6 +422,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +# CONFIG_BFIN_SIR is not set # # Dongle support @@ -457,6 +452,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -465,14 +461,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -492,6 +485,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -548,20 +542,8 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -571,10 +553,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -582,32 +562,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -624,15 +601,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -647,7 +616,6 @@ CONFIG_INPUT=m # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -672,13 +640,12 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -706,28 +673,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -748,22 +698,37 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -780,72 +745,27 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -862,10 +782,6 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # # CONFIG_RTC_DRV_RS5C348 is not set @@ -875,8 +791,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -885,22 +803,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -945,7 +850,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -971,10 +875,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -983,10 +889,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1006,17 +909,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1057,21 +955,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1079,6 +972,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1098,11 +992,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1113,6 +1003,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 20d598d17bd..d77d991a1f6 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,12 +132,12 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC64M4A2FB_7E=y # CONFIG_BFIN533_EZKIT is not set CONFIG_BFIN533_STAMP=y # CONFIG_BFIN533_BLUETECHNIX_CM is not set # CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set # CONFIG_GENERIC_BF533_BOARD is not set # @@ -189,12 +180,14 @@ CONFIG_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=11059200 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=750000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -208,14 +201,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=11 -CONFIG_ENET_FLASH_PIN=0 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -251,12 +247,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -294,17 +292,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -322,7 +316,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -368,6 +364,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -394,10 +391,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -429,6 +422,9 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set # # Dongle support @@ -458,6 +454,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -466,14 +463,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -493,6 +487,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -524,11 +519,7 @@ CONFIG_MTD_ROM=m # CONFIG_MTD_COMPLEX_MAPPINGS=y # CONFIG_MTD_PHYSMAP is not set -CONFIG_MTD_BF5xx=m -CONFIG_BFIN_FLASH_BANK_0=0x7BB0 -CONFIG_BFIN_FLASH_BANK_1=0x7BB0 -CONFIG_BFIN_FLASH_BANK_2=0x7BB0 -CONFIG_BFIN_FLASH_BANK_3=0x7BB0 +CONFIG_MTD_BFIN_ASYNC=m # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -555,20 +546,8 @@ CONFIG_BFIN_FLASH_BANK_3=0x7BB0 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -578,10 +557,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -589,32 +566,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -631,15 +605,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -654,7 +620,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -667,14 +632,8 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set CONFIG_TWI_KEYPAD=m -CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # Hardware I/O ports @@ -687,15 +646,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=39 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -723,28 +680,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y @@ -764,6 +704,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # @@ -771,14 +712,15 @@ CONFIG_I2C_ALGOBIT=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -801,14 +743,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -816,12 +755,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -836,13 +775,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -852,6 +794,20 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -863,24 +819,20 @@ CONFIG_HWMON=y # # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -895,7 +847,7 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -CONFIG_FB_BFIN_7171=m +# CONFIG_FB_BFIN_T350MCQB is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -905,9 +857,14 @@ CONFIG_NTSC=y # CONFIG_PAL_YCBCR is not set CONFIG_ADV7393_1XMEM=y # CONFIG_ADV7393_2XMEM is not set -# CONFIG_FB_BFIN_T350MCQB is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set # @@ -941,6 +898,10 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# SPI devices +# + +# # ALSA Blackfin devices # CONFIG_SND_BLACKFIN_AD1836=m @@ -953,69 +914,43 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BFIN_AD73322=m +CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 +CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 +CONFIG_SND_BFIN_AD73322_RESET=12 # # System on Chip audio support # -# CONFIG_SND_SOC is not set +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC=m +CONFIG_SND_BF5XX_SOC=m +CONFIG_SND_MMAP_SUPPORT=y +CONFIG_SND_BF5XX_SOC_AC97=m +# CONFIG_SND_BF5XX_SOC_WM8750 is not set +# CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set +CONFIG_SND_BF5XX_SOC_BF5xx=m +CONFIG_SND_BF5XX_SPORT_NUM=0 +# CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set # -# Open Sound System +# SoC Audio support for SuperH # -# CONFIG_SOUND_PRIME is not set +CONFIG_SND_SOC_AD1980=m # -# HID Devices +# Open Sound System # +# CONFIG_SOUND_PRIME is not set +CONFIG_AC97_BUS=m +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1035,6 +970,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1042,6 +978,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1053,8 +990,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1063,22 +1002,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Userspace I/O # -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1123,7 +1049,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1149,10 +1074,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1161,10 +1088,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1184,17 +1108,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1235,21 +1154,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1257,6 +1171,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1276,11 +1191,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1291,6 +1202,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index b5189c8ba26..5fd7c4b143d 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -141,7 +132,6 @@ CONFIG_BF_REV_0_2=y # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set CONFIG_BF53x=y -CONFIG_BFIN_SINGLE_CORE=y CONFIG_MEM_MT48LC32M8A2_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_RTC=8 @@ -197,12 +187,14 @@ CONFIG_IRQ_PROG_INTA=12 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=25000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -216,13 +208,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=10 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -258,12 +254,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -301,17 +299,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -329,7 +323,9 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_SUSPEND=y CONFIG_PM_BFIN_SLEEP_DEEPER=y # CONFIG_PM_BFIN_SLEEP is not set # CONFIG_PM_WAKEUP_BY_GPIO is not set @@ -375,6 +371,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -401,10 +398,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -436,6 +429,10 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +CONFIG_BFIN_SIR1=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set # # Dongle support @@ -465,6 +462,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -473,14 +471,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -500,6 +495,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -572,20 +568,8 @@ CONFIG_MTD_NAND_IDS=m # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -595,10 +579,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -606,22 +588,18 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set CONFIG_PHYLIB=y # @@ -635,21 +613,24 @@ CONFIG_PHYLIB=y # CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -# CONFIG_SMC91X is not set CONFIG_BFIN_MAC=y CONFIG_BFIN_MAC_USE_L1=y CONFIG_BFIN_TX_DESC_NUM=10 CONFIG_BFIN_RX_DESC_NUM=20 # CONFIG_BFIN_MAC_RMII is not set +# CONFIG_SMC91X is not set # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -666,15 +647,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -689,7 +662,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -702,14 +674,8 @@ CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set CONFIG_INPUT_MISC=y -# CONFIG_INPUT_ATI_REMOTE is not set -# CONFIG_INPUT_ATI_REMOTE2 is not set -# CONFIG_INPUT_KEYSPAN_REMOTE is not set -# CONFIG_INPUT_POWERMATE is not set -# CONFIG_INPUT_YEALINK is not set # CONFIG_INPUT_UINPUT is not set CONFIG_TWI_KEYPAD=m -CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # Hardware I/O ports @@ -722,15 +688,13 @@ CONFIG_BFIN_TWIKEYPAD_IRQ_PFX=72 # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set CONFIG_BFIN_SPORT=y # CONFIG_BFIN_TIMER_LATENCY is not set CONFIG_TWI_LCD=m -CONFIG_TWI_LCD_SLAVE_ADDR=34 -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -766,28 +730,11 @@ CONFIG_CAN4LINUX=y # CONFIG_CAN_MCF5282 is not set # CONFIG_CAN_UNCTWINCAN is not set CONFIG_CAN_BLACKFIN=m - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set -CONFIG_BLACKFIN_DPMC=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y @@ -809,6 +756,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # @@ -816,14 +764,15 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set CONFIG_SENSORS_AD5252=m # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set -# CONFIG_SENSORS_PCA9543 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -846,14 +795,11 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -861,12 +807,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -881,13 +827,16 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -897,6 +846,20 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -913,21 +876,15 @@ CONFIG_DAB=y # # Graphics support # -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=m -CONFIG_LCD_CLASS_DEVICE=m - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=m CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set @@ -942,7 +899,8 @@ CONFIG_FB_DEFERRED_IO=y # # Frame buffer hardware drivers # -CONFIG_FB_BFIN_7171=m +# CONFIG_FB_HITACHI_TX09 is not set +# CONFIG_FB_BFIN_T350MCQB is not set CONFIG_FB_BFIN_7393=m CONFIG_NTSC=y # CONFIG_PAL is not set @@ -956,10 +914,18 @@ CONFIG_FB_BF537_LQ035=m CONFIG_LQ035_SLAVE_ADDR=0x58 # CONFIG_FB_BFIN_LANDSCAPE is not set # CONFIG_FB_BFIN_BGR is not set -# CONFIG_FB_BFIN_T350MCQB is not set -# CONFIG_FB_HITACHI_TX09 is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_LTV350QV is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=m +CONFIG_BACKLIGHT_CORGI=m + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set # @@ -993,6 +959,10 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_MPU401 is not set # +# SPI devices +# + +# # ALSA Blackfin devices # CONFIG_SND_BLACKFIN_AD1836=m @@ -1005,6 +975,10 @@ CONFIG_SND_BLACKFIN_SPI_PFBIT=4 CONFIG_SND_BFIN_AD73311=m CONFIG_SND_BFIN_SPORT=0 CONFIG_SND_BFIN_AD73311_SE=4 +CONFIG_SND_BFIN_AD73322=m +CONFIG_SND_BFIN_AD73322_SPORT0_SE=10 +CONFIG_SND_BFIN_AD73322_SPORT1_SE=14 +CONFIG_SND_BFIN_AD73322_RESET=12 # # System on Chip audio support @@ -1016,9 +990,14 @@ CONFIG_SND_MMAP_SUPPORT=y CONFIG_SND_BF5XX_SOC_AC97=m # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SOC_BF5xx=m CONFIG_SND_BF5XX_SPORT_NUM=0 # CONFIG_SND_BF5XX_HAVE_COLD_RESET is not set + +# +# SoC Audio support for SuperH +# CONFIG_SND_SOC_AD1980=m # @@ -1026,59 +1005,18 @@ CONFIG_SND_SOC_AD1980=m # # CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=m - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_NO_DUMMY_DELAY is not set +# CONFIG_DUMMY_DELAY_BANK0 is not set +# CONFIG_DUMMY_DELAY_BANK1 is not set +# CONFIG_DUMMY_DELAY_BANK2 is not set +# CONFIG_DUMMY_DELAY_BANK3 is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1098,6 +1036,7 @@ CONFIG_RTC_INTF_DEV=y # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -1105,6 +1044,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_X1205 is not set # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set # # SPI RTC drivers @@ -1116,8 +1056,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1126,22 +1068,9 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_BFIN=y # -# DMA Engine support +# Userspace I/O # -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -1186,7 +1115,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1212,10 +1140,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -1224,10 +1154,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1247,17 +1174,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1298,21 +1220,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1320,6 +1237,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1339,11 +1257,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1354,6 +1268,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index 1ff2ff4b49a..390669e8668 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -365,7 +365,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -468,7 +468,60 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +CONFIG_IRTTY_SIR=m +CONFIG_BFIN_SIR=m +# CONFIG_BFIN_SIR0 is not set +# CONFIG_BFIN_SIR2 is not set +CONFIG_BFIN_SIR3=y +CONFIG_SIR_BFIN_DMA=y +# CONFIG_SIR_BFIN_PIO is not set + +# +# Dongle support +# +# CONFIG_DONGLE is not set +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_MCS_FIR is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -575,6 +628,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_BF5XX=y CONFIG_MTD_NAND_BF5XX_HWECC=y +# CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -766,7 +820,7 @@ CONFIG_BFIN_OTP=y # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set # CONFIG_TWI_LCD is not set -# CONFIG_SIMPLE_GPIO is not set +CONFIG_SIMPLE_GPIO=m CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y @@ -1071,6 +1125,7 @@ CONFIG_SND_BF5XX_SOC_AC97=y CONFIG_SND_BF5XX_SOC_BF548_EZKIT=y # CONFIG_SND_BF5XX_SOC_WM8750 is not set # CONFIG_SND_BF5XX_SOC_WM8731 is not set +# CONFIG_SND_BF5XX_SOC_SSM2602 is not set CONFIG_SND_BF5XX_SPORT_NUM=0 CONFIG_SND_BF5XX_HAVE_COLD_RESET=y CONFIG_SND_BF5XX_RESET_GPIO_NUM=19 @@ -1133,7 +1188,7 @@ CONFIG_USB_MUSB_HOST=y # CONFIG_USB_MUSB_OTG is not set CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set -# CONFIG_USB_INVENTRA_DMA is not set +CONFIG_USB_INVENTRA_DMA=y # CONFIG_USB_TI_CPPI_DMA is not set CONFIG_USB_MUSB_LOGLEVEL=0 @@ -1312,7 +1367,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index b4a20c89081..976a4d7ba17 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -1,6 +1,6 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22.16 +# Linux kernel version: 2.6.24.7 # # CONFIG_MMU is not set # CONFIG_FPU is not set @@ -13,35 +13,34 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_TIME=y CONFIG_GENERIC_GPIO=y CONFIG_FORCE_MAX_ZONEORDER=14 CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_BLK_DEV_INITRD=y @@ -64,32 +63,24 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_EVENTFD=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3 -# CONFIG_NP2 is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -140,7 +131,6 @@ CONFIG_BF_REV_0_3=y # CONFIG_BF_REV_0_5 is not set # CONFIG_BF_REV_ANY is not set # CONFIG_BF_REV_NONE is not set -CONFIG_BFIN_DUAL_CORE=y CONFIG_MEM_MT48LC16M16A2TG_75=y CONFIG_IRQ_PLL_WAKEUP=7 CONFIG_IRQ_SPORT0_ERROR=7 @@ -233,12 +223,14 @@ CONFIG_IRQ_WDTIMER=13 # Board customizations # # CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 # # Clock/PLL Setup # CONFIG_CLKIN_HZ=30000000 # CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 CONFIG_MAX_VCO_HZ=600000000 CONFIG_MIN_VCO_HZ=50000000 CONFIG_MAX_SCLK_HZ=133333333 @@ -252,13 +244,17 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # -# Memory Setup +# Misc # -CONFIG_MAX_MEM_SIZE=512 -CONFIG_MEM_ADD_WIDTH=9 -CONFIG_BOOT_LOAD=0x1000 CONFIG_BFIN_SCRATCH_REG_RETN=y # CONFIG_BFIN_SCRATCH_REG_RETE is not set # CONFIG_BFIN_SCRATCH_REG_CYCLES is not set @@ -294,12 +290,14 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 -CONFIG_LARGE_ALLOCS=y +CONFIG_VIRT_TO_BUS=y # CONFIG_BFIN_GPTIMERS is not set CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set # CONFIG_DMA_UNCACHED_2M is not set CONFIG_DMA_UNCACHED_1M=y # CONFIG_DMA_UNCACHED_NONE is not set @@ -341,17 +339,13 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xAAC3 +CONFIG_BANK_3=0xAAC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # @@ -367,9 +361,15 @@ CONFIG_BINFMT_ZFLAT=y # Power management options # # CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y # CONFIG_PM_WAKEUP_BY_GPIO is not set # +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# # Networking # CONFIG_NET=y @@ -405,6 +405,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -431,10 +432,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -466,6 +463,7 @@ CONFIG_IRDA_CACHE_LAST_LSAP=y # SIR device drivers # CONFIG_IRTTY_SIR=m +# CONFIG_BFIN_SIR is not set # # Dongle support @@ -495,6 +493,7 @@ CONFIG_IRTTY_SIR=m # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -503,14 +502,11 @@ CONFIG_IRTTY_SIR=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set @@ -530,6 +526,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -590,20 +587,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set @@ -613,10 +598,8 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set # CONFIG_IDE is not set # @@ -624,32 +607,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_SMSC911X is not set # CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y # CONFIG_AX88180 is not set CONFIG_NETDEV_10000=y @@ -666,15 +646,7 @@ CONFIG_NETDEV_10000=y # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -689,7 +661,6 @@ CONFIG_INPUT=m # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=m # CONFIG_INPUT_EVBUG is not set @@ -714,13 +685,12 @@ CONFIG_INPUT_EVDEV=m # # CONFIG_AD9960 is not set # CONFIG_SPI_ADC_BF533 is not set -# CONFIG_BF5xx_PFLAGS is not set # CONFIG_BF5xx_PPIFCD is not set # CONFIG_BFIN_SIMPLE_TIMER is not set # CONFIG_BF5xx_PPI is not set # CONFIG_BFIN_SPORT is not set # CONFIG_BFIN_TIMER_LATENCY is not set -# CONFIG_AD5304 is not set +CONFIG_SIMPLE_GPIO=m # CONFIG_VT is not set # CONFIG_SERIAL_NONSTANDARD is not set @@ -748,27 +718,11 @@ CONFIG_UNIX98_PTYS=y # CAN, the car bus and industrial fieldbus # # CONFIG_CAN4LINUX is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_BFIN_WDT=y CONFIG_HW_RANDOM=y # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set @@ -789,22 +743,37 @@ CONFIG_SPI_BFIN=y # # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set - -# -# Dallas's 1-wire bus -# +# CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers @@ -821,91 +790,33 @@ CONFIG_DAB=y # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=m # CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# Enable Host or Gadget support to see Inventra options -# - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices +# Userspace I/O # - -# -# PBX support -# -# CONFIG_PBX is not set +# CONFIG_UIO is not set # # File systems @@ -950,7 +861,6 @@ CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -976,10 +886,12 @@ CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y CONFIG_JFFS2_FS=m CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set @@ -988,10 +900,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -1011,17 +920,12 @@ CONFIG_SMB_FS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set @@ -1062,21 +966,16 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set # CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set - -# -# Profiling support -# +CONFIG_INSTRUMENTATION=y # CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set @@ -1084,6 +983,7 @@ CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y @@ -1104,11 +1004,7 @@ CONFIG_ACCESS_CHECK=y # CONFIG_KEYS is not set CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set -CONFIG_SECURITY_CAPABILITIES=m - -# -# Cryptographic options -# +# CONFIG_SECURITY_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -1119,6 +1015,7 @@ CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=m diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig new file mode 100644 index 00000000000..0799aa9bba9 --- /dev/null +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -0,0 +1,1185 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.7 +# Fri Jul 18 18:00:41 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +CONFIG_BF527=y +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +CONFIG_BF_REV_0_1=y +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF52x=y +CONFIG_MEM_MT48LC16M16A2TG_75=y +# CONFIG_BFIN527_EZKIT is not set +CONFIG_BFIN527_BLUETECHNIX_CM=y + +# +# BF527 Specific Configuration +# + +# +# Alternative Multiplexing Scheme +# +# CONFIG_BF527_SPORT0_PORTF is not set +CONFIG_BF527_SPORT0_PORTG=y +CONFIG_BF527_SPORT0_TSCLK_PG10=y +# CONFIG_BF527_SPORT0_TSCLK_PG14 is not set +CONFIG_BF527_UART1_PORTF=y +# CONFIG_BF527_UART1_PORTG is not set +# CONFIG_BF527_NAND_D_PORTF is not set +CONFIG_BF527_NAND_D_PORTH=y + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_DMA0_ERROR=7 +CONFIG_IRQ_DMAR0_BLK=7 +CONFIG_IRQ_DMAR1_BLK=7 +CONFIG_IRQ_DMAR0_OVR=7 +CONFIG_IRQ_DMAR1_OVR=7 +CONFIG_IRQ_PPI_ERROR=7 +CONFIG_IRQ_MAC_ERROR=7 +CONFIG_IRQ_SPORT0_ERROR=7 +CONFIG_IRQ_SPORT1_ERROR=7 +CONFIG_IRQ_UART0_ERROR=7 +CONFIG_IRQ_UART1_ERROR=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_OPTSEC=11 +CONFIG_IRQ_CNT=11 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_PORTH_INTA=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_PORTH_INTB=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTA=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +CONFIG_IRQ_PORTF_INTA=13 +CONFIG_IRQ_PORTF_INTB=13 +CONFIG_IRQ_SPI_ERROR=7 +CONFIG_IRQ_NFC_ERROR=7 +CONFIG_IRQ_HDMA_ERROR=7 +CONFIG_IRQ_HDMA=7 +CONFIG_IRQ_USB_EINT=10 +CONFIG_IRQ_USB_INT0=11 +CONFIG_IRQ_USB_INT1=11 +CONFIG_IRQ_USB_INT2=11 +CONFIG_IRQ_USB_DMA=11 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=512 +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +# CONFIG_SCHEDULE_L1 is not set +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +# CONFIG_MEMSET_L1 is not set +# CONFIG_MEMCPY_L1 is not set +# CONFIG_SYS_BFIN_SPINLOCK_L1 is not set +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x5554 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC0 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +# CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_BFIN_SLEEP_DEEPER is not set +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +CONFIG_MTD_JEDECPROBE=m +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_BFIN_MAC=y +CONFIG_BFIN_MAC_USE_L1=y +CONFIG_BFIN_TX_DESC_NUM=10 +CONFIG_BFIN_RX_DESC_NUM=20 +CONFIG_BFIN_MAC_RMII=y +# CONFIG_SMC91X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_OTP=y +# CONFIG_BFIN_OTP_WRITE_ENABLE is not set +# CONFIG_BFIN_SPORT is not set +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_SIMPLE_GPIO=m +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_BLACKFIN_TWI=m +CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=50 +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +CONFIG_USB_OTG_BLACKLIST_HUB=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_MUSB_SOC=y + +# +# Blackfin high speed USB support +# +CONFIG_USB_MUSB_HOST=y +# CONFIG_USB_MUSB_PERIPHERAL is not set +# CONFIG_USB_MUSB_OTG is not set +CONFIG_USB_MUSB_HDRC_HCD=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_MUSB_LOGLEVEL=0 + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +# CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set +# CONFIG_DLM is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_CPLB_INFO is not set +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +# CONFIG_SECURITY_ROOTPLUG is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/CM-BF533_defconfig b/arch/blackfin/configs/CM-BF533_defconfig index 560890fe0d3..09deea44480 100644 --- a/arch/blackfin/configs/CM-BF533_defconfig +++ b/arch/blackfin/configs/CM-BF533_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -291,7 +292,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -617,8 +618,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -778,7 +778,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -866,11 +866,11 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/CM-BF537E_defconfig b/arch/blackfin/configs/CM-BF537E_defconfig index 9f66d2de100..219fc345a5f 100644 --- a/arch/blackfin/configs/CM-BF537E_defconfig +++ b/arch/blackfin/configs/CM-BF537E_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -299,7 +300,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -351,7 +352,10 @@ CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -645,8 +649,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -806,7 +809,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -894,12 +897,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set -# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set diff --git a/arch/blackfin/configs/CM-BF537U_defconfig b/arch/blackfin/configs/CM-BF537U_defconfig index 2694d06c5bd..9873d586fc7 100644 --- a/arch/blackfin/configs/CM-BF537U_defconfig +++ b/arch/blackfin/configs/CM-BF537U_defconfig @@ -39,7 +39,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TASKSTATS is not set # CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set @@ -298,8 +299,8 @@ CONFIG_C_AMBEN_ALL=y # CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 -CONFIG_BANK_2=0xFFC3 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_2=0xFFC2 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -628,8 +629,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -806,7 +806,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -894,12 +894,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MMRS is not set -# CONFIG_DEBUG_HUNT_FOR_ZERO is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y # CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index 90207251c53..0e3605fdb7b 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -363,7 +363,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x5554 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 CONFIG_EBIU_MBSCTLVAL=0x0 CONFIG_EBIU_MODEVAL=0x1 CONFIG_EBIU_FCTLVAL=0x6 @@ -744,8 +744,8 @@ CONFIG_BFIN_OTP=y # CONFIG_SERIAL_BFIN=y CONFIG_SERIAL_BFIN_CONSOLE=y -# CONFIG_SERIAL_BFIN_DMA is not set -CONFIG_SERIAL_BFIN_PIO=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set # CONFIG_SERIAL_BFIN_UART0 is not set CONFIG_SERIAL_BFIN_UART1=y # CONFIG_BFIN_UART1_CTSRTS is not set @@ -1149,7 +1149,7 @@ CONFIG_RTC_DRV_BFIN=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1332,7 +1332,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/CM-BF561_defconfig b/arch/blackfin/configs/CM-BF561_defconfig index daf00906c1e..59c7cdbee90 100644 --- a/arch/blackfin/configs/CM-BF561_defconfig +++ b/arch/blackfin/configs/CM-BF561_defconfig @@ -35,7 +35,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set # CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set CONFIG_FAIR_GROUP_SCHED=y @@ -341,7 +342,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x7BB0 CONFIG_BANK_2=0x7BB0 -CONFIG_BANK_3=0xFFC3 +CONFIG_BANK_3=0xFFC2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -631,8 +632,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_BFIN_SPORT is not set CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_LEGACY_PTYS is not set # # CAN, the car bus and industrial fieldbus @@ -756,7 +756,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -830,12 +830,12 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set -# CONFIG_DEBUG_MMRS is not set +CONFIG_DEBUG_MMRS=y CONFIG_DEBUG_HUNT_FOR_ZERO=y CONFIG_DEBUG_BFIN_HWTRACE_ON=y CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 679c7483ea7..ba0bee90b7e 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -967,7 +967,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index 4384a670a8b..285d2241df2 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -1066,7 +1066,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index 87622ad9df4..bffca7de65d 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -294,7 +294,7 @@ CONFIG_C_AMBEN_ALL=y CONFIG_BANK_0=0x7BB0 CONFIG_BANK_1=0x33B0 CONFIG_BANK_2=0x33B0 -CONFIG_BANK_3=0x99B3 +CONFIG_BANK_3=0x99B2 # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) @@ -1080,7 +1080,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 951ea041257..b1309f878fc 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -1067,7 +1067,7 @@ CONFIG_FS_MBCACHE=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y +# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set diff --git a/arch/blackfin/kernel/Makefile b/arch/blackfin/kernel/Makefile index 6140cd69c78..606adc78aa8 100644 --- a/arch/blackfin/kernel/Makefile +++ b/arch/blackfin/kernel/Makefile @@ -18,6 +18,5 @@ endif obj-$(CONFIG_BFIN_GPTIMERS) += gptimers.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_BFIN_DMA_5XX) += bfin_dma_5xx.o -obj-$(CONFIG_DUAL_CORE_TEST_MODULE) += dualcore_test.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c index d54f19085f3..93229b3d6e3 100644 --- a/arch/blackfin/kernel/bfin_dma_5xx.c +++ b/arch/blackfin/kernel/bfin_dma_5xx.c @@ -472,6 +472,40 @@ unsigned long get_dma_curr_addr(unsigned int channel) } EXPORT_SYMBOL(get_dma_curr_addr); +#ifdef CONFIG_PM +int blackfin_dma_suspend(void) +{ + int i; + +#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ + for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) { +#else + for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) { +#endif + if (dma_ch[i].chan_status == DMA_CHANNEL_ENABLED) { + printk(KERN_ERR "DMA Channel %d failed to suspend\n", i); + return -EBUSY; + } + + dma_ch[i].saved_peripheral_map = dma_ch[i].regs->peripheral_map; + } + + return 0; +} + +void blackfin_dma_resume(void) +{ + int i; + +#ifdef CONFIG_BF561 /* IMDMA channels doesn't have a PERIPHERAL_MAP */ + for (i = 0; i <= CH_MEM_STREAM3_SRC; i++) +#else + for (i = 0; i < MAX_BLACKFIN_DMA_CHANNEL; i++) +#endif + dma_ch[i].regs->peripheral_map = dma_ch[i].saved_peripheral_map; +} +#endif + static void *__dma_memcpy(void *dest, const void *src, size_t size) { int direction; /* 1 - address decrease, 0 - address increase */ diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c index b6d89d1644c..ecbd141e0ef 100644 --- a/arch/blackfin/kernel/bfin_gpio.c +++ b/arch/blackfin/kernel/bfin_gpio.c @@ -186,7 +186,10 @@ static struct str_ident { char name[RESOURCE_LABEL_SIZE]; } str_ident[MAX_RESOURCES]; -#if defined(CONFIG_PM) && !defined(CONFIG_BF54x) +#if defined(CONFIG_PM) +#if defined(CONFIG_BF54x) +static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; +#else static unsigned short wakeup_map[gpio_bank(MAX_BLACKFIN_GPIOS)]; static unsigned char wakeup_flags_map[MAX_BLACKFIN_GPIOS]; static struct gpio_port_s gpio_bank_saved[gpio_bank(MAX_BLACKFIN_GPIOS)]; @@ -206,7 +209,7 @@ static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PORTF_INT #ifdef BF561_FAMILY static unsigned int sic_iwr_irqs[gpio_bank(MAX_BLACKFIN_GPIOS)] = {IRQ_PROG0_INTB, IRQ_PROG1_INTB, IRQ_PROG2_INTB}; #endif - +#endif #endif /* CONFIG_PM */ #if defined(BF548_FAMILY) @@ -667,7 +670,7 @@ static int bfin_gpio_wakeup_type(unsigned gpio, unsigned char type) return 0; } -u32 bfin_pm_setup(void) +u32 bfin_pm_standby_setup(void) { u16 bank, mask, i, gpio; @@ -679,7 +682,7 @@ u32 bfin_pm_setup(void) gpio_bankb[bank]->maskb = 0; if (mask) { -#ifdef BF537_FAMILY +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) gpio_bank_saved[bank].fer = *port_fer[bank]; #endif gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; @@ -715,7 +718,7 @@ u32 bfin_pm_setup(void) return 0; } -void bfin_pm_restore(void) +void bfin_pm_standby_restore(void) { u16 bank, mask, i; @@ -724,7 +727,7 @@ void bfin_pm_restore(void) bank = gpio_bank(i); if (mask) { -#ifdef BF537_FAMILY +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) *port_fer[bank] = gpio_bank_saved[bank].fer; #endif gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; @@ -743,8 +746,111 @@ void bfin_pm_restore(void) AWA_DUMMY_READ(maskb); } +void bfin_gpio_pm_hibernate_suspend(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) + gpio_bank_saved[bank].fer = *port_fer[bank]; +#ifdef BF527_FAMILY + gpio_bank_saved[bank].mux = *port_mux[bank]; +#else + if (bank == 0) + gpio_bank_saved[bank].mux = bfin_read_PORT_MUX(); +#endif +#endif + gpio_bank_saved[bank].data = gpio_bankb[bank]->data; + gpio_bank_saved[bank].inen = gpio_bankb[bank]->inen; + gpio_bank_saved[bank].polar = gpio_bankb[bank]->polar; + gpio_bank_saved[bank].dir = gpio_bankb[bank]->dir; + gpio_bank_saved[bank].edge = gpio_bankb[bank]->edge; + gpio_bank_saved[bank].both = gpio_bankb[bank]->both; + gpio_bank_saved[bank].maska = gpio_bankb[bank]->maska; + } + + AWA_DUMMY_READ(maska); +} + +void bfin_gpio_pm_hibernate_restore(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + +#if defined(BF527_FAMILY) || defined(BF537_FAMILY) +#ifdef BF527_FAMILY + *port_mux[bank] = gpio_bank_saved[bank].mux; +#else + if (bank == 0) + bfin_write_PORT_MUX(gpio_bank_saved[bank].mux); +#endif + *port_fer[bank] = gpio_bank_saved[bank].fer; +#endif + gpio_bankb[bank]->inen = gpio_bank_saved[bank].inen; + gpio_bankb[bank]->dir = gpio_bank_saved[bank].dir; + gpio_bankb[bank]->polar = gpio_bank_saved[bank].polar; + gpio_bankb[bank]->edge = gpio_bank_saved[bank].edge; + gpio_bankb[bank]->both = gpio_bank_saved[bank].both; + + gpio_bankb[bank]->data_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; + + gpio_bankb[bank]->maska = gpio_bank_saved[bank].maska; + } + AWA_DUMMY_READ(maska); +} + + #endif #else /* BF548_FAMILY */ +#ifdef CONFIG_PM + +u32 bfin_pm_standby_setup(void) +{ + return 0; +} + +void bfin_pm_standby_restore(void) +{ + +} + +void bfin_gpio_pm_hibernate_suspend(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + + gpio_bank_saved[bank].fer = gpio_array[bank]->port_fer; + gpio_bank_saved[bank].mux = gpio_array[bank]->port_mux; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].data = gpio_array[bank]->port_data; + gpio_bank_saved[bank].inen = gpio_array[bank]->port_inen; + gpio_bank_saved[bank].dir = gpio_array[bank]->port_dir_set; + } +} + +void bfin_gpio_pm_hibernate_restore(void) +{ + int i, bank; + + for (i = 0; i < MAX_BLACKFIN_GPIOS; i += GPIO_BANKSIZE) { + bank = gpio_bank(i); + + gpio_array[bank]->port_mux = gpio_bank_saved[bank].mux; + gpio_array[bank]->port_fer = gpio_bank_saved[bank].fer; + gpio_array[bank]->port_inen = gpio_bank_saved[bank].inen; + gpio_array[bank]->port_dir_set = gpio_bank_saved[bank].dir; + gpio_array[bank]->port_set = gpio_bank_saved[bank].data + | gpio_bank_saved[bank].dir; + } +} +#endif unsigned short get_gpio_dir(unsigned gpio) { diff --git a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S index 2788532de72..ecbabc0a1fe 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S +++ b/arch/blackfin/kernel/cplb-nompu/cplbhdlr.S @@ -125,6 +125,6 @@ ENTRY(__cplb_hdr) SP += -12; call _panic_cplb_error; SP += 12; - JUMP _handle_bad_cplb; + JUMP.L _handle_bad_cplb; ENDPROC(__cplb_hdr) diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 6be0c50122e..224e7cc30bc 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -26,11 +26,7 @@ #include <asm/cplb.h> #include <asm/cplbinit.h> -#ifdef CONFIG_MAX_MEM_SIZE -# define CPLB_MEM CONFIG_MAX_MEM_SIZE -#else -# define CPLB_MEM CONFIG_MEM_SIZE -#endif +#define CPLB_MEM CONFIG_MAX_MEM_SIZE /* * Number of required data CPLB switchtable entries diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c deleted file mode 100644 index 0fcba74840b..00000000000 --- a/arch/blackfin/kernel/dualcore_test.c +++ /dev/null @@ -1,49 +0,0 @@ -/* - * File: arch/blackfin/kernel/dualcore_test.c - * Based on: - * Author: - * - * Created: - * Description: Small test code for CoreB on a BF561 - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/module.h> - -static int *testarg = (int *)0xfeb00000; - -static int test_init(void) -{ - *testarg = 1; - printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n", - *testarg, testarg); - return 0; -} - -static void test_exit(void) -{ - printk(KERN_INFO "Dual core test module removed: testarg = [%d]\n", *testarg); -} - -module_init(test_init); -module_exit(test_exit); diff --git a/arch/blackfin/kernel/entry.S b/arch/blackfin/kernel/entry.S index 65f4e67a65c..31bd9bf3efa 100644 --- a/arch/blackfin/kernel/entry.S +++ b/arch/blackfin/kernel/entry.S @@ -64,6 +64,11 @@ ENDPROC(_ret_from_fork) ENTRY(_sys_fork) r0 = -EINVAL; +#if (ANOMALY_05000371) + nop; + nop; + nop; +#endif rts; ENDPROC(_sys_fork) diff --git a/arch/blackfin/kernel/kgdb.c b/arch/blackfin/kernel/kgdb.c index a9c15515bfd..a1f9641a642 100644 --- a/arch/blackfin/kernel/kgdb.c +++ b/arch/blackfin/kernel/kgdb.c @@ -203,6 +203,8 @@ struct hw_breakpoint { int kgdb_arch_init(void) { + debugger_step = 0; + kgdb_remove_all_hw_break(); return 0; } @@ -368,6 +370,7 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, char *ptr; int newPC; int wp_status; + int i; switch (remcom_in_buffer[0]) { case 'c': @@ -392,7 +395,18 @@ int kgdb_arch_handle_exception(int exceptionVector, int signo, /* set the trace bit if we're stepping */ if (remcom_in_buffer[0] == 's') { linux_regs->syscfg |= 0x1; - debugger_step = 1; + debugger_step = linux_regs->ipend; + debugger_step >>= 6; + for (i = 10; i > 0; i--, debugger_step >>= 1) + if (debugger_step & 1) + break; + /* i indicate event priority of current stopped instruction + * user space instruction is 0, IVG15 is 1, IVTMR is 10. + * debugger_step > 0 means in single step mode + */ + debugger_step = i + 1; + } else { + debugger_step = 0; } wp_status = bfin_read_WPSTAT(); diff --git a/arch/blackfin/kernel/module.c b/arch/blackfin/kernel/module.c index 14a42848f37..e1bebc80a5b 100644 --- a/arch/blackfin/kernel/module.c +++ b/arch/blackfin/kernel/module.c @@ -173,7 +173,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, for (s = sechdrs; s < sechdrs_end; ++s) { if ((strcmp(".l1.text", secstrings + s->sh_name) == 0) || ((strcmp(".text", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_CODE_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_CODE_IN_L1) && (s->sh_size > 0))) { dest = l1_inst_sram_alloc(s->sh_size); mod->arch.text_l1 = dest; if (dest == NULL) { @@ -188,7 +188,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, } if ((strcmp(".l1.data", secstrings + s->sh_name) == 0) || ((strcmp(".data", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) { dest = l1_data_sram_alloc(s->sh_size); mod->arch.data_a_l1 = dest; if (dest == NULL) { @@ -203,7 +203,7 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, } if (strcmp(".l1.bss", secstrings + s->sh_name) == 0 || ((strcmp(".bss", secstrings + s->sh_name) == 0) && - (hdr->e_flags & FLG_DATA_IN_L1) && (s->sh_size > 0))) { + (hdr->e_flags & EF_BFIN_DATA_IN_L1) && (s->sh_size > 0))) { dest = l1_data_sram_alloc(s->sh_size); mod->arch.bss_a_l1 = dest; if (dest == NULL) { @@ -242,6 +242,51 @@ module_frob_arch_sections(Elf_Ehdr * hdr, Elf_Shdr * sechdrs, s->sh_flags &= ~SHF_ALLOC; s->sh_addr = (unsigned long)dest; } + if ((strcmp(".l2.text", secstrings + s->sh_name) == 0) || + ((strcmp(".text", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_CODE_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.text_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if ((strcmp(".l2.data", secstrings + s->sh_name) == 0) || + ((strcmp(".data", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.data_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memcpy(dest, (void *)s->sh_addr, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } + if (strcmp(".l2.bss", secstrings + s->sh_name) == 0 || + ((strcmp(".bss", secstrings + s->sh_name) == 0) && + (hdr->e_flags & EF_BFIN_DATA_IN_L2) && (s->sh_size > 0))) { + dest = l2_sram_alloc(s->sh_size); + mod->arch.bss_l2 = dest; + if (dest == NULL) { + printk(KERN_ERR + "module %s: L2 SRAM allocation failed\n", + mod->name); + return -1; + } + memset(dest, 0, s->sh_size); + s->sh_flags &= ~SHF_ALLOC; + s->sh_addr = (unsigned long)dest; + } } return 0; } @@ -411,9 +456,10 @@ module_finalize(const Elf_Ehdr * hdr, continue; if ((sechdrs[i].sh_type == SHT_RELA) && - ((strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || + ((strcmp(".rela.l2.text", secstrings + sechdrs[i].sh_name) == 0) || + (strcmp(".rela.l1.text", secstrings + sechdrs[i].sh_name) == 0) || ((strcmp(".rela.text", secstrings + sechdrs[i].sh_name) == 0) && - (hdr->e_flags & FLG_CODE_IN_L1)))) { + (hdr->e_flags & (EF_BFIN_CODE_IN_L1|EF_BFIN_CODE_IN_L2))))) { apply_relocate_add((Elf_Shdr *) sechdrs, strtab, symindex, i, mod); } @@ -423,14 +469,12 @@ module_finalize(const Elf_Ehdr * hdr, void module_arch_cleanup(struct module *mod) { - if (mod->arch.text_l1) - l1_inst_sram_free((void *)mod->arch.text_l1); - if (mod->arch.data_a_l1) - l1_data_sram_free((void *)mod->arch.data_a_l1); - if (mod->arch.bss_a_l1) - l1_data_sram_free((void *)mod->arch.bss_a_l1); - if (mod->arch.data_b_l1) - l1_data_B_sram_free((void *)mod->arch.data_b_l1); - if (mod->arch.bss_b_l1) - l1_data_B_sram_free((void *)mod->arch.bss_b_l1); + l1_inst_sram_free(mod->arch.text_l1); + l1_data_A_sram_free(mod->arch.data_a_l1); + l1_data_A_sram_free(mod->arch.bss_a_l1); + l1_data_B_sram_free(mod->arch.data_b_l1); + l1_data_B_sram_free(mod->arch.bss_b_l1); + l2_sram_free(mod->arch.text_l2); + l2_sram_free(mod->arch.data_l2); + l2_sram_free(mod->arch.bss_l2); } diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index f51ab088098..bf1a51d8e60 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -220,6 +220,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(tmp); } else #endif +#if L1_DATA_A_LENGTH != 0 + if (addr + add >= L1_DATA_A_START + && addr + add + sizeof(tmp) <= L1_DATA_A_START + L1_DATA_A_LENGTH) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr + add >= L1_DATA_B_START + && addr + add + sizeof(tmp) <= L1_DATA_B_START + L1_DATA_B_LENGTH) { + memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); + copied = sizeof(tmp); + } else +#endif if (addr + add >= FIXED_CODE_START && addr + add + sizeof(tmp) <= FIXED_CODE_END) { memcpy(&tmp, (const void *)(addr + add), sizeof(tmp)); @@ -290,6 +304,20 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) copied = sizeof(data); } else #endif +#if L1_DATA_A_LENGTH != 0 + if (addr + add >= L1_DATA_A_START + && addr + add + sizeof(data) <= L1_DATA_A_START + L1_DATA_A_LENGTH) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else +#endif +#if L1_DATA_B_LENGTH != 0 + if (addr + add >= L1_DATA_B_START + && addr + add + sizeof(data) <= L1_DATA_B_START + L1_DATA_B_LENGTH) { + memcpy((void *)(addr + add), &data, sizeof(data)); + copied = sizeof(data); + } else +#endif if (addr + add >= FIXED_CODE_START && addr + add + sizeof(data) <= FIXED_CODE_END) { memcpy((void *)(addr + add), &data, sizeof(data)); diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 8efea004aec..23e637eb78d 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -104,6 +104,7 @@ void __init bf53x_relocate_l1_mem(void) unsigned long l1_code_length; unsigned long l1_data_a_length; unsigned long l1_data_b_length; + unsigned long l2_length; l1_code_length = _etext_l1 - _stext_l1; if (l1_code_length > L1_CODE_LENGTH) @@ -129,6 +130,15 @@ void __init bf53x_relocate_l1_mem(void) /* Copy _sdata_b_l1 to _ebss_b_l1 to L1 data bank B SRAM */ dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); + +#ifdef L2_LENGTH + l2_length = _ebss_l2 - _stext_l2; + if (l2_length > L2_LENGTH) + panic("L2 SRAM Overflow\n"); + + /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ + dma_memcpy(_stext_l2, _l2_lma_start, l2_length); +#endif } /* add_memory_region to memmap */ @@ -664,11 +674,8 @@ static __init void setup_bootmem_allocator(void) }) static inline int __init get_mem_size(void) { -#ifdef CONFIG_MEM_SIZE - return CONFIG_MEM_SIZE; -#else -# if defined(EBIU_SDBCTL) -# if defined(BF561_FAMILY) +#if defined(EBIU_SDBCTL) +# if defined(BF561_FAMILY) int ret = 0; u32 sdbctl = bfin_read_EBIU_SDBCTL(); ret += EBSZ_TO_MEG(sdbctl >> 0); @@ -676,10 +683,10 @@ static inline int __init get_mem_size(void) ret += EBSZ_TO_MEG(sdbctl >> 16); ret += EBSZ_TO_MEG(sdbctl >> 24); return ret; -# else +# else return EBSZ_TO_MEG(bfin_read_EBIU_SDBCTL()); -# endif -# elif defined(EBIU_DDRCTL1) +# endif +#elif defined(EBIU_DDRCTL1) u32 ddrctl = bfin_read_EBIU_DDRCTL1(); int ret = 0; switch (ddrctl & 0xc0000) { @@ -693,8 +700,9 @@ static inline int __init get_mem_size(void) case DEVWD_8: ret *= 2; case DEVWD_16: break; } + if ((ddrctl & 0xc000) == 0x4000) + ret *= 2; return ret; -# endif #endif BUG(); } @@ -763,6 +771,9 @@ void __init setup_arch(char **cmdline_p) _bfin_swrst = bfin_read_SWRST(); + /* If we double fault, reset the system - otherwise we hang forever */ + bfin_write_SWRST(DOUBLE_FAULT); + if (_bfin_swrst & RESET_DOUBLE) printk(KERN_INFO "Recovering from Double Fault event\n"); else if (_bfin_swrst & RESET_WDOG) @@ -842,38 +853,55 @@ static int __init topology_init(void) subsys_initcall(topology_init); +/* Get the voltage input multiplier */ +static u_long cached_vco_pll_ctl, cached_vco; static u_long get_vco(void) { u_long msel; - u_long vco; - msel = (bfin_read_PLL_CTL() >> 9) & 0x3F; + u_long pll_ctl = bfin_read_PLL_CTL(); + if (pll_ctl == cached_vco_pll_ctl) + return cached_vco; + else + cached_vco_pll_ctl = pll_ctl; + + msel = (pll_ctl >> 9) & 0x3F; if (0 == msel) msel = 64; - vco = CONFIG_CLKIN_HZ; - vco >>= (1 & bfin_read_PLL_CTL()); /* DF bit */ - vco = msel * vco; - return vco; + cached_vco = CONFIG_CLKIN_HZ; + cached_vco >>= (1 & pll_ctl); /* DF bit */ + cached_vco *= msel; + return cached_vco; } /* Get the Core clock */ +static u_long cached_cclk_pll_div, cached_cclk; u_long get_cclk(void) { u_long csel, ssel; + if (bfin_read_PLL_STAT() & 0x1) return CONFIG_CLKIN_HZ; ssel = bfin_read_PLL_DIV(); + if (ssel == cached_cclk_pll_div) + return cached_cclk; + else + cached_cclk_pll_div = ssel; + csel = ((ssel >> 4) & 0x03); ssel &= 0xf; if (ssel && ssel < (1 << csel)) /* SCLK > CCLK */ - return get_vco() / ssel; - return get_vco() >> csel; + cached_cclk = get_vco() / ssel; + else + cached_cclk = get_vco() >> csel; + return cached_cclk; } EXPORT_SYMBOL(get_cclk); /* Get the System clock */ +static u_long cached_sclk_pll_div, cached_sclk; u_long get_sclk(void) { u_long ssel; @@ -881,13 +909,20 @@ u_long get_sclk(void) if (bfin_read_PLL_STAT() & 0x1) return CONFIG_CLKIN_HZ; - ssel = (bfin_read_PLL_DIV() & 0xf); + ssel = bfin_read_PLL_DIV(); + if (ssel == cached_sclk_pll_div) + return cached_sclk; + else + cached_sclk_pll_div = ssel; + + ssel &= 0xf; if (0 == ssel) { printk(KERN_WARNING "Invalid System Clock\n"); ssel = 1; } - return get_vco() / ssel; + cached_sclk = get_vco() / ssel; + return cached_sclk; } EXPORT_SYMBOL(get_sclk); @@ -916,7 +951,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) uint32_t revid; u_long cclk = 0, sclk = 0; - u_int dcache_size = 0, dsup_banks = 0; + u_int icache_size = BFIN_ICACHESIZE / 1024, dcache_size = 0, dsup_banks = 0; cpu = CPU; mmu = "none"; @@ -985,12 +1020,15 @@ static int show_cpuinfo(struct seq_file *m, void *v) } /* Is it turned on? */ - if (!((bfin_read_DMEM_CONTROL()) & (ENDCPLB | DMC_ENABLE))) + if ((bfin_read_DMEM_CONTROL() & (ENDCPLB | DMC_ENABLE)) != (ENDCPLB | DMC_ENABLE)) dcache_size = 0; + if ((bfin_read_IMEM_CONTROL() & (IMC | ENICPLB)) == (IMC | ENICPLB)) + icache_size = 0; + seq_printf(m, "cache size\t: %d KB(L1 icache) " "%d KB(L1 dcache-%s) %d KB(L2 cache)\n", - BFIN_ICACHESIZE / 1024, dcache_size, + icache_size, dcache_size, #if defined CONFIG_BFIN_WB "wb" #elif defined CONFIG_BFIN_WT @@ -1000,8 +1038,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) seq_printf(m, "%s\n", cache); - seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", - BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); + if (icache_size) + seq_printf(m, "icache setup\t: %d Sub-banks/%d Ways, %d Lines/Way\n", + BFIN_ISUBBANKS, BFIN_IWAYS, BFIN_ILINES); + else + seq_printf(m, "icache setup\t: off\n"); + seq_printf(m, "dcache setup\t: %d Super-banks/%d Sub-banks/%d Ways, %d Lines/Way\n", dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index f061f518162..ad922ab9154 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -69,8 +69,6 @@ void __init trap_init(void) unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr; -int kstack_depth_to_print = 48; - static void decode_address(char *buf, unsigned long address) { struct vm_list_struct *vml; @@ -163,6 +161,9 @@ static void decode_address(char *buf, unsigned long address) if (!in_atomic) mmput(mm); + if (!strlen(buf)) + sprintf(buf, "<0x%p> [ %s ] dynamic memory", (void *)address, name); + goto done; } @@ -173,7 +174,7 @@ static void decode_address(char *buf, unsigned long address) } /* we were unable to find this address anywhere */ - sprintf(buf, "<0x%p> /* unknown address */", (void *)address); + sprintf(buf, "<0x%p> /* kernel dynamic memory */", (void *)address); done: write_unlock_irqrestore(&tasklist_lock, flags); @@ -494,7 +495,7 @@ asmlinkage void trap_c(struct pt_regs *fp) BUG_ON(sig == 0); if (sig != SIGTRAP) { - unsigned long stack; + unsigned long *stack; dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); @@ -508,14 +509,23 @@ asmlinkage void trap_c(struct pt_regs *fp) else #endif dump_bfin_trace_buffer(); - show_stack(current, &stack); + if (oops_in_progress) { + /* Dump the current kernel stack */ + printk(KERN_NOTICE "\n" KERN_NOTICE "Kernel Stack\n"); + show_stack(current, NULL); + print_modules(); #ifndef CONFIG_ACCESS_CHECK printk(KERN_EMERG "Please turn on " "CONFIG_ACCESS_CHECK\n"); #endif panic("Kernel exception"); + } else { + /* Dump the user space stack */ + stack = (unsigned long *)rdusp(); + printk(KERN_NOTICE "Userspace Stack\n"); + show_stack(NULL, stack); } } @@ -532,11 +542,71 @@ asmlinkage void trap_c(struct pt_regs *fp) #define EXPAND_LEN ((1 << CONFIG_DEBUG_BFIN_HWTRACE_EXPAND_LEN) * 256 - 1) +/* + * Similar to get_user, do some address checking, then dereference + * Return true on sucess, false on bad address + */ +bool get_instruction(unsigned short *val, unsigned short *address) +{ + + unsigned long addr; + + addr = (unsigned long)address; + + /* Check for odd addresses */ + if (addr & 0x1) + return false; + + /* Check that things do not wrap around */ + if (addr > (addr + 2)) + return false; + + /* + * Since we are in exception context, we need to do a little address checking + * We need to make sure we are only accessing valid memory, and + * we don't read something in the async space that can hang forever + */ + if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || +#ifdef L2_START + (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || +#endif + (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || +#if L1_DATA_A_LENGTH != 0 + (addr >= L1_DATA_A_START && (addr + 2) <= (L1_DATA_A_START + L1_DATA_A_LENGTH)) || +#endif +#if L1_DATA_B_LENGTH != 0 + (addr >= L1_DATA_B_START && (addr + 2) <= (L1_DATA_B_START + L1_DATA_B_LENGTH)) || +#endif + (addr >= L1_SCRATCH_START && (addr + 2) <= (L1_SCRATCH_START + L1_SCRATCH_LENGTH)) || + (!(bfin_read_EBIU_AMBCTL0() & B0RDYEN) && + addr >= ASYNC_BANK0_BASE && (addr + 2) <= (ASYNC_BANK0_BASE + ASYNC_BANK0_SIZE)) || + (!(bfin_read_EBIU_AMBCTL0() & B1RDYEN) && + addr >= ASYNC_BANK1_BASE && (addr + 2) <= (ASYNC_BANK1_BASE + ASYNC_BANK1_SIZE)) || + (!(bfin_read_EBIU_AMBCTL1() & B2RDYEN) && + addr >= ASYNC_BANK2_BASE && (addr + 2) <= (ASYNC_BANK2_BASE + ASYNC_BANK1_SIZE)) || + (!(bfin_read_EBIU_AMBCTL1() & B3RDYEN) && + addr >= ASYNC_BANK3_BASE && (addr + 2) <= (ASYNC_BANK3_BASE + ASYNC_BANK1_SIZE))) { + *val = *address; + return true; + } + +#if L1_CODE_LENGTH != 0 + if (addr >= L1_CODE_START && (addr + 2) <= (L1_CODE_START + L1_CODE_LENGTH)) { + dma_memcpy(val, address, 2); + return true; + } +#endif + + + return false; +} + void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; char buf[150]; + unsigned short val = 0, *addr; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif @@ -549,8 +619,42 @@ void dump_bfin_trace_buffer(void) for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { decode_address(buf, (unsigned long)bfin_read_TBUF()); printk(KERN_NOTICE "%4i Target : %s\n", i, buf); - decode_address(buf, (unsigned long)bfin_read_TBUF()); - printk(KERN_NOTICE " Source : %s\n", buf); + addr = (unsigned short *)bfin_read_TBUF(); + decode_address(buf, (unsigned long)addr); + printk(KERN_NOTICE " Source : %s ", buf); + if (get_instruction(&val, addr)) { + if (val == 0x0010) + printk("RTS"); + else if (val == 0x0011) + printk("RTI"); + else if (val == 0x0012) + printk("RTX"); + else if (val >= 0x0050 && val <= 0x0057) + printk("JUMP (P%i)", val & 7); + else if (val >= 0x0060 && val <= 0x0067) + printk("CALL (P%i)", val & 7); + else if (val >= 0x0070 && val <= 0x0077) + printk("CALL (PC+P%i)", val & 7); + else if (val >= 0x0080 && val <= 0x0087) + printk("JUMP (PC+P%i)", val & 7); + else if ((val >= 0x1000 && val <= 0x13FF) || + (val >= 0x1800 && val <= 0x1BFF)) + printk("IF !CC JUMP"); + else if ((val >= 0x1400 && val <= 0x17ff) || + (val >= 0x1c00 && val <= 0x1fff)) + printk("IF CC JUMP"); + else if (val >= 0x2000 && val <= 0x2fff) + printk("JUMP.S"); + else if (val >= 0xe080 && val <= 0xe0ff) + printk("LSETUP"); + else if (val >= 0xe200 && val <= 0xe2ff) + printk("JUMP.L"); + else if (val >= 0xe300 && val <= 0xe3ff) + printk("CALL pcrel"); + else + printk("0x%04x", val); + } + printk("\n"); } } @@ -582,59 +686,151 @@ void dump_bfin_trace_buffer(void) } EXPORT_SYMBOL(dump_bfin_trace_buffer); -static void show_trace(struct task_struct *tsk, unsigned long *sp) +/* + * Checks to see if the address pointed to is either a + * 16-bit CALL instruction, or a 32-bit CALL instruction + */ +bool is_bfin_call(unsigned short *addr) { - unsigned long addr; + unsigned short opcode = 0, *ins_addr; + ins_addr = (unsigned short *)addr; - printk(KERN_NOTICE "\n" KERN_NOTICE "Call Trace:\n"); - - while (!kstack_end(sp)) { - addr = *sp++; - /* - * If the address is either in the text segment of the - * kernel, or in the region which contains vmalloc'ed - * memory, it *may* be the address of a calling - * routine; if so, print it so that someone tracing - * down the cause of the crash will be able to figure - * out the call path that was taken. - */ - if (kernel_text_address(addr)) - print_ip_sym(addr); - } + if (!get_instruction(&opcode, ins_addr)) + return false; - printk(KERN_NOTICE "\n"); -} + if ((opcode >= 0x0060 && opcode <= 0x0067) || + (opcode >= 0x0070 && opcode <= 0x0077)) + return true; + + ins_addr--; + if (!get_instruction(&opcode, ins_addr)) + return false; + if (opcode >= 0xE300 && opcode <= 0xE3FF) + return true; + + return false; + +} void show_stack(struct task_struct *task, unsigned long *stack) { - unsigned long *endstack, addr; - int i; + unsigned int *addr, *endstack, *fp = 0, *frame; + unsigned short *ins_addr; + char buf[150]; + unsigned int i, j, ret_addr, frame_no = 0; - /* Cannot call dump_bfin_trace_buffer() here as show_stack() is - * called externally in some places in the kernel. + /* + * If we have been passed a specific stack, use that one otherwise + * if we have been passed a task structure, use that, otherwise + * use the stack of where the variable "stack" exists */ - if (!stack) { - if (task) + if (stack == NULL) { + if (task) { + /* We know this is a kernel stack, so this is the start/end */ stack = (unsigned long *)task->thread.ksp; - else + endstack = (unsigned int *)(((unsigned int)(stack) & ~(THREAD_SIZE - 1)) + THREAD_SIZE); + } else { + /* print out the existing stack info */ stack = (unsigned long *)&stack; + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + } + } else + endstack = (unsigned int *)PAGE_ALIGN((unsigned int)stack); + + decode_address(buf, (unsigned int)stack); + printk(KERN_NOTICE "Stack info:\n" KERN_NOTICE " SP: [0x%p] %s\n", stack, buf); + addr = (unsigned int *)((unsigned int)stack & ~0x3F); + + /* First thing is to look for a frame pointer */ + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr < endstack; addr++, i++) { + if (*addr & 0x1) + continue; + ins_addr = (unsigned short *)*addr; + ins_addr--; + if (is_bfin_call(ins_addr)) + fp = addr - 1; + + if (fp) { + /* Let's check to see if it is a frame pointer */ + while (fp >= (addr - 1) && fp < endstack && fp) + fp = (unsigned int *)*fp; + if (fp == 0 || fp == endstack) { + fp = addr - 1; + break; + } + fp = 0; + } } + if (fp) { + frame = fp; + printk(" FP: (0x%p)\n", fp); + } else + frame = 0; - addr = (unsigned long)stack; - endstack = (unsigned long *)PAGE_ALIGN(addr); + /* + * Now that we think we know where things are, we + * walk the stack again, this time printing things out + * incase there is no frame pointer, we still look for + * valid return addresses + */ - printk(KERN_NOTICE "Stack from %08lx:", (unsigned long)stack); - for (i = 0; i < kstack_depth_to_print; i++) { - if (stack + 1 > endstack) - break; - if (i % 8 == 0) - printk("\n" KERN_NOTICE " "); - printk(" %08lx", *stack++); + /* First time print out data, next time, print out symbols */ + for (j = 0; j <= 1; j++) { + if (j) + printk(KERN_NOTICE "Return addresses in stack:\n"); + else + printk(KERN_NOTICE " Memory from 0x%08lx to %p", ((long unsigned int)stack & ~0xF), endstack); + + fp = frame; + frame_no = 0; + + for (addr = (unsigned int *)((unsigned int)stack & ~0xF), i = 0; + addr <= endstack; addr++, i++) { + + ret_addr = 0; + if (!j && i % 8 == 0) + printk("\n" KERN_NOTICE "%p:",addr); + + /* if it is an odd address, or zero, just skip it */ + if (*addr & 0x1 || !*addr) + goto print; + + ins_addr = (unsigned short *)*addr; + + /* Go back one instruction, and see if it is a CALL */ + ins_addr--; + ret_addr = is_bfin_call(ins_addr); + print: + if (!j && stack == (unsigned long *)addr) + printk("[%08x]", *addr); + else if (ret_addr) + if (j) { + decode_address(buf, (unsigned int)*addr); + if (frame == addr) { + printk(KERN_NOTICE " frame %2i : %s\n", frame_no, buf); + continue; + } + printk(KERN_NOTICE " address : %s\n", buf); + } else + printk("<%08x>", *addr); + else if (fp == addr) { + if (j) + frame = addr+1; + else + printk("(%08x)", *addr); + + fp = (unsigned int *)*addr; + frame_no++; + + } else if (!j) + printk(" %08x ", *addr); + } + if (!j) + printk("\n"); } - printk("\n"); - show_trace(task, stack); } void dump_stack(void) @@ -715,19 +911,9 @@ void dump_bfin_mem(struct pt_regs *fp) if (!((unsigned long)addr & 0xF)) printk("\n" KERN_NOTICE "0x%p: ", addr); - if (get_user(val, addr)) { - if (addr >= (unsigned short *)L1_CODE_START && - addr < (unsigned short *)(L1_CODE_START + L1_CODE_LENGTH)) { - dma_memcpy(&val, addr, sizeof(val)); - sprintf(buf, "%04x", val); - } else if (addr >= (unsigned short *)FIXED_CODE_START && - addr <= (unsigned short *)memory_start) { - val = bfin_read16(addr); - sprintf(buf, "%04x", val); - } else { + if (get_instruction(&val, addr)) { val = 0; sprintf(buf, "????"); - } } else sprintf(buf, "%04x", val); diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 3ecc64cab3b..0896e38d610 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -101,6 +101,11 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.data.B) #endif +#ifndef L2_LENGTH + . = ALIGN(32); + *(.data_l2.cacheline_aligned) + *(.l2.data) +#endif DATA_DATA *(.data.*) @@ -182,14 +187,13 @@ SECTIONS *(.l1.data) __edata_l1 = .; - . = ALIGN(4); - __sbss_l1 = .; - *(.l1.bss) - . = ALIGN(32); *(.data_l1.cacheline_aligned) . = ALIGN(4); + __sbss_l1 = .; + *(.l1.bss) + . = ALIGN(4); __ebss_l1 = .; } @@ -203,11 +207,37 @@ SECTIONS . = ALIGN(4); __sbss_b_l1 = .; *(.l1.bss.B) - . = ALIGN(4); __ebss_b_l1 = .; } +#ifdef L2_LENGTH + __l2_lma_start = .; + + .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) + { + . = ALIGN(4); + __stext_l2 = .; + *(.l1.text) + . = ALIGN(4); + __etext_l2 = .; + + . = ALIGN(4); + __sdata_l2 = .; + *(.l1.data) + __edata_l2 = .; + + . = ALIGN(32); + *(.data_l2.cacheline_aligned) + + . = ALIGN(4); + __sbss_l2 = .; + *(.l1.bss) + . = ALIGN(4); + __ebss_l2 = .; + } +#endif + /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. */ diff --git a/arch/blackfin/mach-bf527/boards/Kconfig b/arch/blackfin/mach-bf527/boards/Kconfig index 6a570ad0374..8bf9e58f014 100644 --- a/arch/blackfin/mach-bf527/boards/Kconfig +++ b/arch/blackfin/mach-bf527/boards/Kconfig @@ -9,4 +9,9 @@ config BFIN527_EZKIT help BF527-EZKIT-LITE board support. +config BFIN527_BLUETECHNIX_CM + bool "Bluetechnix CM-BF527" + help + CM-BF527 support for EVAL- and DEV-Board. + endchoice diff --git a/arch/blackfin/mach-bf527/boards/Makefile b/arch/blackfin/mach-bf527/boards/Makefile index 7277d35ef11..7ba7d256bbb 100644 --- a/arch/blackfin/mach-bf527/boards/Makefile +++ b/arch/blackfin/mach-bf527/boards/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_BFIN527_EZKIT) += ezkit.o +obj-$(CONFIG_BFIN527_BLUETECHNIX_CM) += cm_bf527.o diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c new file mode 100644 index 00000000000..0b26ae2de5e --- /dev/null +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -0,0 +1,1011 @@ +/* + * File: arch/blackfin/mach-bf527/boards/cm-bf527.c + * Based on: arch/blackfin/mach-bf537/boards/stamp.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: + * Description: + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/etherdevice.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <linux/pata_platform.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/usb/sl811.h> +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +#include <linux/usb/musb.h> +#endif +#include <asm/cplb.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <asm/nand.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> +#include <linux/spi/ad7877.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix CM-BF527"; + +/* + * Driver needs to know address, irq and flag pin. + */ + +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) +static struct resource musb_resources[] = { + [0] = { + .start = 0xffc03800, + .end = 0xffc03cff, + .flags = IORESOURCE_MEM, + }, + [1] = { /* general IRQ */ + .start = IRQ_USB_INT0, + .end = IRQ_USB_INT0, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, + [2] = { /* DMA IRQ */ + .start = IRQ_USB_DMA, + .end = IRQ_USB_DMA, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct musb_hdrc_platform_data musb_plat = { +#if defined(CONFIG_USB_MUSB_OTG) + .mode = MUSB_OTG, +#elif defined(CONFIG_USB_MUSB_HDRC_HCD) + .mode = MUSB_HOST, +#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) + .mode = MUSB_PERIPHERAL, +#endif + .multipoint = 0, +}; + +static u64 musb_dmamask = ~(u32)0; + +static struct platform_device musb_device = { + .name = "musb_hdrc", + .id = 0, + .dev = { + .dma_mask = &musb_dmamask, + .coherent_dma_mask = 0xffffffff, + .platform_data = &musb_plat, + }, + .num_resources = ARRAY_SIZE(musb_resources), + .resource = musb_resources, +}; +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) +static struct mtd_partition ezkit_partitions[] = { + { + .name = "Bootloader", + .size = 0x40000, + .offset = 0, + }, { + .name = "Kernel", + .size = 0x1C0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "RootFS", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data ezkit_flash_data = { + .width = 2, + .parts = ezkit_partitions, + .nr_parts = ARRAY_SIZE(ezkit_partitions), +}; + +static struct resource ezkit_flash_resource = { + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device ezkit_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ezkit_flash_data, + }, + .num_resources = 1, + .resource = &ezkit_flash_resource, +}; +#endif + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) +static struct mtd_partition partition_info[] = { + { + .name = "Linux Kernel", + .offset = 0, + .size = 4 * SIZE_1M, + }, + { + .name = "File System", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct bf5xx_nand_platform bf5xx_nand_platform = { + .page_size = NFC_PG_SIZE_256, + .data_width = NFC_NWIDTH_8, + .partitions = partition_info, + .nr_partitions = ARRAY_SIZE(partition_info), + .rd_dly = 3, + .wr_dly = 3, +}; + +static struct resource bf5xx_nand_resources[] = { + { + .start = NFC_CTL, + .end = NFC_DATA_RD + 2, + .flags = IORESOURCE_MEM, + }, + { + .start = CH_NFC, + .end = CH_NFC, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bf5xx_nand_device = { + .name = "bf5xx-nand", + .id = 0, + .num_resources = ARRAY_SIZE(bf5xx_nand_resources), + .resource = bf5xx_nand_resources, + .dev = { + .platform_data = &bf5xx_nand_platform, + }, +}; +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) +static struct resource bfin_pcmcia_cf_resources[] = { + { + .start = 0x20310000, /* IO PORT */ + .end = 0x20312000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20311000, /* Attribute Memory */ + .end = 0x20311FFF, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF4, + .end = IRQ_PF4, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, + }, { + .start = 6, /* Card Detect PF6 */ + .end = 6, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pcmcia_cf_device = { + .name = "bfin_cf_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pcmcia_cf_resources), + .resource = bfin_pcmcia_cf_resources, +}; +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) +static struct resource sl811_hcd_resources[] = { + { + .start = 0x20340000, + .end = 0x20340000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20340004, + .end = 0x20340004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) +void sl811_port_power(struct device *dev, int is_on) +{ + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS, is_on); +} +#endif + +static struct sl811_platform_data sl811_priv = { + .potpg = 10, + .power = 250, /* == 500mA */ +#if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) + .port_power = &sl811_port_power, +#endif +}; + +static struct platform_device sl811_hcd_device = { + .name = "sl811-hcd", + .id = 0, + .dev = { + .platform_data = &sl811_priv, + }, + .num_resources = ARRAY_SIZE(sl811_hcd_resources), + .resource = sl811_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20360000, + .end = 0x20360000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20360004, + .end = 0x20360004, + .flags = IORESOURCE_MEM, + }, { + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20300000, + .end = 0x20300000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF7, + .end = IRQ_PF7, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p16", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) +static struct bfin5xx_spi_chip spi_wm8731_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF8, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .controller_data = &spi_ad7877_chip_info, + }, +#endif +#if defined(CONFIG_SND_SOC_WM8731) || defined(CONFIG_SND_SOC_WM8731_MODULE) \ + && defined(CONFIG_SND_SOC_WM8731_SPI) + { + .modalias = "wm8731", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 5, + .controller_data = &spi_wm8731_chip_info, + .mode = SPI_MODE_0, + }, +#endif +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { +#ifdef CONFIG_SERIAL_BFIN_UART0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_SERIAL_BFIN_UART1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE) + { + I2C_BOARD_INFO("pcf8574_lcd", 0x22), + .type = "pcf8574_lcd", + }, +#endif +#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE) + { + I2C_BOARD_INFO("pcf8574_keypad", 0x27), + .type = "pcf8574_keypad", + .irq = IRQ_PF8, + }, +#endif +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF14, 1, "gpio-keys: BTN0"}, +}; + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_100, 400000000), + VRPAIR(VLEV_105, 426000000), + VRPAIR(VLEV_110, 500000000), + VRPAIR(VLEV_115, 533000000), + VRPAIR(VLEV_120, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) + &bf5xx_nand_device, +#endif + +#if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) + &bfin_pcmcia_cf_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) + &sl811_hcd_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) + &musb_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) + &ezkit_flash_device, +#endif + + &bfin_gpios_device, +}; + +static int __init stamp_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; +} + +arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index 57bdb3ba2fe..fe05cc1ef17 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -185,7 +185,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -318,7 +318,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ @@ -398,12 +398,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index 1295deac00a..c671e8549b1 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -31,7 +31,7 @@ #include <linux/init.h> #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -186,7 +186,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -319,7 +319,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) p0.h = hi(SIC_IWR); p0.l = lo(SIC_IWR); @@ -390,12 +390,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 671f9d67f23..6dbc76fb080 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -29,9 +29,12 @@ */ #include <linux/device.h> +#include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/plat-ram.h> #include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> @@ -355,6 +358,84 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) +#ifdef CONFIG_MTD_PARTITIONS +const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; + +static struct mtd_partition bfin_plat_nand_partitions[] = { + { + .name = "linux kernel", + .size = 0x400000, + .offset = 0, + }, { + .name = "file system", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + }, +}; +#endif + +#define BFIN_NAND_PLAT_CLE 2 +#define BFIN_NAND_PLAT_ALE 1 +static void bfin_plat_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + + if (cmd == NAND_CMD_NONE) + return; + + if (ctrl & NAND_CLE) + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_CLE)); + else + writeb(cmd, this->IO_ADDR_W + (1 << BFIN_NAND_PLAT_ALE)); +} + +#define BFIN_NAND_PLAT_READY GPIO_PF3 +static int bfin_plat_nand_dev_ready(struct mtd_info *mtd) +{ + return gpio_get_value(BFIN_NAND_PLAT_READY); +} + +static struct platform_nand_data bfin_plat_nand_data = { + .chip = { + .chip_delay = 30, +#ifdef CONFIG_MTD_PARTITIONS + .part_probe_types = part_probes, + .partitions = bfin_plat_nand_partitions, + .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), +#endif + }, + .ctrl = { + .cmd_ctrl = bfin_plat_nand_cmd_ctrl, + .dev_ready = bfin_plat_nand_dev_ready, + }, +}; + +#define MAX(x, y) (x > y ? x : y) +static struct resource bfin_plat_nand_resources = { + .start = 0x20212000, + .end = 0x20212000 + (1 << MAX(BFIN_NAND_PLAT_CLE, BFIN_NAND_PLAT_ALE)), + .flags = IORESOURCE_IO, +}; + +static struct platform_device bfin_async_nand_device = { + .name = "gen_nand", + .id = -1, + .num_resources = 1, + .resource = &bfin_plat_nand_resources, + .dev = { + .platform_data = &bfin_plat_nand_data, + }, +}; + +static void bfin_plat_nand_init(void) +{ + gpio_request(BFIN_NAND_PLAT_READY, "bfin_nand_plat"); +} +#else +static void bfin_plat_nand_init(void) {} +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { @@ -780,7 +861,7 @@ static struct platform_device bfin_sport1_uart_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 +#define PATA_INT IRQ_PF5 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 1, @@ -922,6 +1003,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_gpios_device, +#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) + &bfin_async_nand_device, +#endif + #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) &stamp_flash_device, #endif @@ -936,6 +1021,7 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_i2c_board_info)); #endif + bfin_plat_nand_init(); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 48cd58a410a..6b019eaee0b 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -32,7 +32,7 @@ #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -217,7 +217,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif @@ -350,7 +350,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ @@ -430,12 +430,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index af7c211a580..166fa2201ee 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -61,6 +61,49 @@ const char bfin_board_name[] = "ADSP-BF548-EZKIT"; * Driver needs to know address, irq and flag pin. */ +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = 0x2C0C0000, + .end = 0x2C0C0000 + 0xfffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PG7, + .end = IRQ_PG7, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + set_irq_type(bfin_isp1761_resources[1].start, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_FB_BF54X_LQ043) || defined(CONFIG_FB_BF54X_LQ043_MODULE) #include <asm/mach/bf54x-lq043.h> @@ -177,6 +220,7 @@ static struct resource bfin_uart_resources[] = { { .start = 0xFFC03100, .end = 0xFFC031FF, + .flags = IORESOURCE_MEM, }, #endif }; diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index f7191141a3c..06b9178cfcf 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -31,7 +31,7 @@ #include <linux/init.h> #include <asm/blackfin.h> #include <asm/trace.h> -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif @@ -130,7 +130,7 @@ ENTRY(__start) /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK call _start_dma_code; #endif /* Code for initializing Async memory banks */ @@ -288,7 +288,7 @@ ENDPROC(_real_start) __FINIT .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) /* Enable PHY CLK buffer output */ diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index 5b8bd40851d..cf1a2dff01e 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -377,12 +377,6 @@ ENTRY(_start_dma_code) w[p0] = r0.l; ssync; - p0.l = LO(EBIU_SDBCTL); - p0.h = HI(EBIU_SDBCTL); /* SDRAM Memory Bank Control Register */ - r0 = mem_SDBCTL; - w[p0] = r0.l; - ssync; - P2.H = hi(EBIU_SDGCTL); P2.L = lo(EBIU_SDGCTL); R0 = [P2]; diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index caaab49e9cf..f9160d83b91 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -53,9 +53,3 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ - -#ifdef CONFIG_MEM_SIZE -#if (CONFIG_MEM_SIZE % 4) -#error "SDRAM mem size must be multible of 4MB" -#endif -#endif diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index b7981d31c39..5e3f1d8a4fb 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -7,7 +7,7 @@ #include <linux/linkage.h> #include <asm/blackfin.h> #include <asm/mach/irq.h> - +#include <asm/dpmc.h> .section .l1.text @@ -51,31 +51,32 @@ ENTRY(_sleep_mode) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_sleep_mode) ENTRY(_hibernate_mode) [--SP] = ( R7:0, P5:0 ); [--SP] = RETS; + R3 = R0; + R0 = IWR_DISABLE_ALL; + R1 = IWR_DISABLE_ALL; + R2 = IWR_DISABLE_ALL; call _set_sic_iwr; + call _set_dram_srfs; + SSYNC; R0 = 0xFFFF (Z); call _set_rtc_istat; P0.H = hi(VR_CTL); P0.L = lo(VR_CTL); - R1 = W[P0](z); - BITSET (R1, 8); - BITCLR (R1, 0); - BITCLR (R1, 1); - W[P0] = R1.L; - SSYNC; + W[P0] = R3.L; CLI R2; IDLE; - - /* Actually, adding anything may not be necessary...SDRAM contents - * are lost - */ +.Lforever: + jump .Lforever; +ENDPROC(_hibernate_mode) ENTRY(_deep_sleep) [--SP] = ( R7:0, P5:0 ); @@ -131,6 +132,7 @@ ENTRY(_deep_sleep) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_deep_sleep) ENTRY(_sleep_deeper) [--SP] = ( R7:0, P5:0 ); @@ -232,53 +234,73 @@ ENTRY(_sleep_deeper) RETS = [SP++]; ( R7:0, P5:0 ) = [SP++]; RTS; +ENDPROC(_sleep_deeper) ENTRY(_set_dram_srfs) /* set the dram to self refresh mode */ -#if defined(CONFIG_BF54x) + SSYNC; +#if defined(EBIU_RSTCTL) /* DDR */ P0.H = hi(EBIU_RSTCTL); P0.L = lo(EBIU_RSTCTL); R2 = [P0]; - R3.H = hi(SRREQ); - R3.L = lo(SRREQ); -#else - P0.H = hi(EBIU_SDGCTL); + BITSET(R2, 3); /* SRREQ enter self-refresh mode */ + [P0] = R2; + SSYNC; +1: + R2 = [P0]; + CC = BITTST(R2, 4); + if !CC JUMP 1b; +#else /* SDRAM */ P0.L = lo(EBIU_SDGCTL); + P0.H = hi(EBIU_SDGCTL); R2 = [P0]; - R3.H = hi(SRFS); - R3.L = lo(SRFS); -#endif - R2 = R2|R3; + BITSET(R2, 24); /* SRFS enter self-refresh mode */ [P0] = R2; - ssync; -#if defined(CONFIG_BF54x) -.LSRR_MODE: + SSYNC; + + P0.L = lo(EBIU_SDSTAT); + P0.H = hi(EBIU_SDSTAT); +1: + R2 = w[P0]; + SSYNC; + cc = BITTST(R2, 1); /* SDSRA poll self-refresh status */ + if !cc jump 1b; + + P0.L = lo(EBIU_SDGCTL); + P0.H = hi(EBIU_SDGCTL); R2 = [P0]; - CC = BITTST(R2, 4); - if !CC JUMP .LSRR_MODE; + BITCLR(R2, 0); /* SCTLE disable CLKOUT */ + [P0] = R2; #endif RTS; +ENDPROC(_set_dram_srfs) ENTRY(_unset_dram_srfs) /* set the dram out of self refresh mode */ -#if defined(CONFIG_BF54x) +#if defined(EBIU_RSTCTL) /* DDR */ P0.H = hi(EBIU_RSTCTL); P0.L = lo(EBIU_RSTCTL); R2 = [P0]; - R3.H = hi(SRREQ); - R3.L = lo(SRREQ); -#else + BITCLR(R2, 3); /* clear SRREQ bit */ + [P0] = R2; +#elif defined(EBIU_SDGCTL) /* SDRAM */ + + P0.L = lo(EBIU_SDGCTL); /* release CLKOUT from self-refresh */ + P0.H = hi(EBIU_SDGCTL); + R2 = [P0]; + BITSET(R2, 0); /* SCTLE enable CLKOUT */ + [P0] = R2 + SSYNC; + + P0.L = lo(EBIU_SDGCTL); /* release SDRAM from self-refresh */ P0.H = hi(EBIU_SDGCTL); - P0.L = lo(EBIU_SDGCTL); R2 = [P0]; - R3.H = hi(SRFS); - R3.L = lo(SRFS); + BITCLR(R2, 24); /* clear SRFS bit */ + [P0] = R2 #endif - R3 = ~R3; - R2 = R2&R3; - [P0] = R2; - ssync; + SSYNC; RTS; +ENDPROC(_unset_dram_srfs) ENTRY(_set_sic_iwr) #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) @@ -300,6 +322,7 @@ ENTRY(_set_sic_iwr) SSYNC; RTS; +ENDPROC(_set_sic_iwr) ENTRY(_set_rtc_istat) #ifndef CONFIG_BF561 @@ -307,8 +330,14 @@ ENTRY(_set_rtc_istat) P0.L = lo(RTC_ISTAT); w[P0] = R0.L; SSYNC; +#elif (ANOMALY_05000371) + nop; + nop; + nop; + nop; #endif RTS; +ENDPROC(_set_rtc_istat) ENTRY(_test_pll_locked) P0.H = hi(PLL_STAT); @@ -318,3 +347,509 @@ ENTRY(_test_pll_locked) CC = BITTST(R0,5); IF !CC JUMP 1b; RTS; +ENDPROC(_test_pll_locked) + +.section .text + +ENTRY(_do_hibernate) + [--SP] = ( R7:0, P5:0 ); + [--SP] = RETS; + /* Save System MMRs */ + R2 = R0; + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + +#ifdef SIC_IMASK0 + PM_SYS_PUSH(SIC_IMASK0) +#endif +#ifdef SIC_IMASK1 + PM_SYS_PUSH(SIC_IMASK1) +#endif +#ifdef SIC_IMASK2 + PM_SYS_PUSH(SIC_IMASK2) +#endif +#ifdef SIC_IMASK + PM_SYS_PUSH(SIC_IMASK) +#endif +#ifdef SICA_IMASK0 + PM_SYS_PUSH(SICA_IMASK0) +#endif +#ifdef SICA_IMASK1 + PM_SYS_PUSH(SICA_IMASK1) +#endif +#ifdef SIC_IAR2 + PM_SYS_PUSH(SIC_IAR0) + PM_SYS_PUSH(SIC_IAR1) + PM_SYS_PUSH(SIC_IAR2) +#endif +#ifdef SIC_IAR3 + PM_SYS_PUSH(SIC_IAR3) +#endif +#ifdef SIC_IAR4 + PM_SYS_PUSH(SIC_IAR4) + PM_SYS_PUSH(SIC_IAR5) + PM_SYS_PUSH(SIC_IAR6) +#endif +#ifdef SIC_IAR7 + PM_SYS_PUSH(SIC_IAR7) +#endif +#ifdef SIC_IAR8 + PM_SYS_PUSH(SIC_IAR8) + PM_SYS_PUSH(SIC_IAR9) + PM_SYS_PUSH(SIC_IAR10) + PM_SYS_PUSH(SIC_IAR11) +#endif + +#ifdef SICA_IAR0 + PM_SYS_PUSH(SICA_IAR0) + PM_SYS_PUSH(SICA_IAR1) + PM_SYS_PUSH(SICA_IAR2) + PM_SYS_PUSH(SICA_IAR3) + PM_SYS_PUSH(SICA_IAR4) + PM_SYS_PUSH(SICA_IAR5) + PM_SYS_PUSH(SICA_IAR6) + PM_SYS_PUSH(SICA_IAR7) +#endif + +#ifdef SIC_IWR + PM_SYS_PUSH(SIC_IWR) +#endif +#ifdef SIC_IWR0 + PM_SYS_PUSH(SIC_IWR0) +#endif +#ifdef SIC_IWR1 + PM_SYS_PUSH(SIC_IWR1) +#endif +#ifdef SIC_IWR2 + PM_SYS_PUSH(SIC_IWR2) +#endif +#ifdef SICA_IWR0 + PM_SYS_PUSH(SICA_IWR0) +#endif +#ifdef SICA_IWR1 + PM_SYS_PUSH(SICA_IWR1) +#endif + +#ifdef PINT0_ASSIGN + PM_SYS_PUSH(PINT0_ASSIGN) + PM_SYS_PUSH(PINT1_ASSIGN) + PM_SYS_PUSH(PINT2_ASSIGN) + PM_SYS_PUSH(PINT3_ASSIGN) +#endif + + PM_SYS_PUSH(EBIU_AMBCTL0) + PM_SYS_PUSH(EBIU_AMBCTL1) + PM_SYS_PUSH16(EBIU_AMGCTL) + +#ifdef EBIU_FCTL + PM_SYS_PUSH(EBIU_MBSCTL) + PM_SYS_PUSH(EBIU_MODE) + PM_SYS_PUSH(EBIU_FCTL) +#endif + + PM_SYS_PUSH16(SYSCR) + + /* Save Core MMRs */ + P0.H = hi(SRAM_BASE_ADDRESS); + P0.L = lo(SRAM_BASE_ADDRESS); + + PM_PUSH(DMEM_CONTROL) + PM_PUSH(DCPLB_ADDR0) + PM_PUSH(DCPLB_ADDR1) + PM_PUSH(DCPLB_ADDR2) + PM_PUSH(DCPLB_ADDR3) + PM_PUSH(DCPLB_ADDR4) + PM_PUSH(DCPLB_ADDR5) + PM_PUSH(DCPLB_ADDR6) + PM_PUSH(DCPLB_ADDR7) + PM_PUSH(DCPLB_ADDR8) + PM_PUSH(DCPLB_ADDR9) + PM_PUSH(DCPLB_ADDR10) + PM_PUSH(DCPLB_ADDR11) + PM_PUSH(DCPLB_ADDR12) + PM_PUSH(DCPLB_ADDR13) + PM_PUSH(DCPLB_ADDR14) + PM_PUSH(DCPLB_ADDR15) + PM_PUSH(DCPLB_DATA0) + PM_PUSH(DCPLB_DATA1) + PM_PUSH(DCPLB_DATA2) + PM_PUSH(DCPLB_DATA3) + PM_PUSH(DCPLB_DATA4) + PM_PUSH(DCPLB_DATA5) + PM_PUSH(DCPLB_DATA6) + PM_PUSH(DCPLB_DATA7) + PM_PUSH(DCPLB_DATA8) + PM_PUSH(DCPLB_DATA9) + PM_PUSH(DCPLB_DATA10) + PM_PUSH(DCPLB_DATA11) + PM_PUSH(DCPLB_DATA12) + PM_PUSH(DCPLB_DATA13) + PM_PUSH(DCPLB_DATA14) + PM_PUSH(DCPLB_DATA15) + PM_PUSH(IMEM_CONTROL) + PM_PUSH(ICPLB_ADDR0) + PM_PUSH(ICPLB_ADDR1) + PM_PUSH(ICPLB_ADDR2) + PM_PUSH(ICPLB_ADDR3) + PM_PUSH(ICPLB_ADDR4) + PM_PUSH(ICPLB_ADDR5) + PM_PUSH(ICPLB_ADDR6) + PM_PUSH(ICPLB_ADDR7) + PM_PUSH(ICPLB_ADDR8) + PM_PUSH(ICPLB_ADDR9) + PM_PUSH(ICPLB_ADDR10) + PM_PUSH(ICPLB_ADDR11) + PM_PUSH(ICPLB_ADDR12) + PM_PUSH(ICPLB_ADDR13) + PM_PUSH(ICPLB_ADDR14) + PM_PUSH(ICPLB_ADDR15) + PM_PUSH(ICPLB_DATA0) + PM_PUSH(ICPLB_DATA1) + PM_PUSH(ICPLB_DATA2) + PM_PUSH(ICPLB_DATA3) + PM_PUSH(ICPLB_DATA4) + PM_PUSH(ICPLB_DATA5) + PM_PUSH(ICPLB_DATA6) + PM_PUSH(ICPLB_DATA7) + PM_PUSH(ICPLB_DATA8) + PM_PUSH(ICPLB_DATA9) + PM_PUSH(ICPLB_DATA10) + PM_PUSH(ICPLB_DATA11) + PM_PUSH(ICPLB_DATA12) + PM_PUSH(ICPLB_DATA13) + PM_PUSH(ICPLB_DATA14) + PM_PUSH(ICPLB_DATA15) + PM_PUSH(EVT0) + PM_PUSH(EVT1) + PM_PUSH(EVT2) + PM_PUSH(EVT3) + PM_PUSH(EVT4) + PM_PUSH(EVT5) + PM_PUSH(EVT6) + PM_PUSH(EVT7) + PM_PUSH(EVT8) + PM_PUSH(EVT9) + PM_PUSH(EVT10) + PM_PUSH(EVT11) + PM_PUSH(EVT12) + PM_PUSH(EVT13) + PM_PUSH(EVT14) + PM_PUSH(EVT15) + PM_PUSH(IMASK) + PM_PUSH(ILAT) + PM_PUSH(IPRIO) + PM_PUSH(TCNTL) + PM_PUSH(TPERIOD) + PM_PUSH(TSCALE) + PM_PUSH(TCOUNT) + PM_PUSH(TBUFCTL) + + /* Save Core Registers */ + [--sp] = SYSCFG; + [--sp] = ( R7:0, P5:0 ); + [--sp] = fp; + [--sp] = usp; + + [--sp] = i0; + [--sp] = i1; + [--sp] = i2; + [--sp] = i3; + + [--sp] = m0; + [--sp] = m1; + [--sp] = m2; + [--sp] = m3; + + [--sp] = l0; + [--sp] = l1; + [--sp] = l2; + [--sp] = l3; + + [--sp] = b0; + [--sp] = b1; + [--sp] = b2; + [--sp] = b3; + [--sp] = a0.x; + [--sp] = a0.w; + [--sp] = a1.x; + [--sp] = a1.w; + + [--sp] = LC0; + [--sp] = LC1; + [--sp] = LT0; + [--sp] = LT1; + [--sp] = LB0; + [--sp] = LB1; + + [--sp] = ASTAT; + [--sp] = CYCLES; + [--sp] = CYCLES2; + + [--sp] = RETS; + r0 = RETI; + [--sp] = r0; + [--sp] = RETX; + [--sp] = RETN; + [--sp] = RETE; + [--sp] = SEQSTAT; + + /* Save Magic, return address and Stack Pointer */ + P0.H = 0; + P0.L = 0; + R0.H = 0xDEAD; /* Hibernate Magic */ + R0.L = 0xBEEF; + [P0++] = R0; /* Store Hibernate Magic */ + R0.H = .Lpm_resume_here; + R0.L = .Lpm_resume_here; + [P0++] = R0; /* Save Return Address */ + [P0++] = SP; /* Save Stack Pointer */ + P0.H = _hibernate_mode; + P0.L = _hibernate_mode; + R0 = R2; + call (P0); /* Goodbye */ + +.Lpm_resume_here: + + /* Restore Core Registers */ + SEQSTAT = [sp++]; + RETE = [sp++]; + RETN = [sp++]; + RETX = [sp++]; + r0 = [sp++]; + RETI = r0; + RETS = [sp++]; + + CYCLES2 = [sp++]; + CYCLES = [sp++]; + ASTAT = [sp++]; + + LB1 = [sp++]; + LB0 = [sp++]; + LT1 = [sp++]; + LT0 = [sp++]; + LC1 = [sp++]; + LC0 = [sp++]; + + a1.w = [sp++]; + a1.x = [sp++]; + a0.w = [sp++]; + a0.x = [sp++]; + b3 = [sp++]; + b2 = [sp++]; + b1 = [sp++]; + b0 = [sp++]; + + l3 = [sp++]; + l2 = [sp++]; + l1 = [sp++]; + l0 = [sp++]; + + m3 = [sp++]; + m2 = [sp++]; + m1 = [sp++]; + m0 = [sp++]; + + i3 = [sp++]; + i2 = [sp++]; + i1 = [sp++]; + i0 = [sp++]; + + usp = [sp++]; + fp = [sp++]; + + ( R7 : 0, P5 : 0) = [ SP ++ ]; + SYSCFG = [sp++]; + + /* Restore Core MMRs */ + + PM_POP(TBUFCTL) + PM_POP(TCOUNT) + PM_POP(TSCALE) + PM_POP(TPERIOD) + PM_POP(TCNTL) + PM_POP(IPRIO) + PM_POP(ILAT) + PM_POP(IMASK) + PM_POP(EVT15) + PM_POP(EVT14) + PM_POP(EVT13) + PM_POP(EVT12) + PM_POP(EVT11) + PM_POP(EVT10) + PM_POP(EVT9) + PM_POP(EVT8) + PM_POP(EVT7) + PM_POP(EVT6) + PM_POP(EVT5) + PM_POP(EVT4) + PM_POP(EVT3) + PM_POP(EVT2) + PM_POP(EVT1) + PM_POP(EVT0) + PM_POP(ICPLB_DATA15) + PM_POP(ICPLB_DATA14) + PM_POP(ICPLB_DATA13) + PM_POP(ICPLB_DATA12) + PM_POP(ICPLB_DATA11) + PM_POP(ICPLB_DATA10) + PM_POP(ICPLB_DATA9) + PM_POP(ICPLB_DATA8) + PM_POP(ICPLB_DATA7) + PM_POP(ICPLB_DATA6) + PM_POP(ICPLB_DATA5) + PM_POP(ICPLB_DATA4) + PM_POP(ICPLB_DATA3) + PM_POP(ICPLB_DATA2) + PM_POP(ICPLB_DATA1) + PM_POP(ICPLB_DATA0) + PM_POP(ICPLB_ADDR15) + PM_POP(ICPLB_ADDR14) + PM_POP(ICPLB_ADDR13) + PM_POP(ICPLB_ADDR12) + PM_POP(ICPLB_ADDR11) + PM_POP(ICPLB_ADDR10) + PM_POP(ICPLB_ADDR9) + PM_POP(ICPLB_ADDR8) + PM_POP(ICPLB_ADDR7) + PM_POP(ICPLB_ADDR6) + PM_POP(ICPLB_ADDR5) + PM_POP(ICPLB_ADDR4) + PM_POP(ICPLB_ADDR3) + PM_POP(ICPLB_ADDR2) + PM_POP(ICPLB_ADDR1) + PM_POP(ICPLB_ADDR0) + PM_POP(IMEM_CONTROL) + PM_POP(DCPLB_DATA15) + PM_POP(DCPLB_DATA14) + PM_POP(DCPLB_DATA13) + PM_POP(DCPLB_DATA12) + PM_POP(DCPLB_DATA11) + PM_POP(DCPLB_DATA10) + PM_POP(DCPLB_DATA9) + PM_POP(DCPLB_DATA8) + PM_POP(DCPLB_DATA7) + PM_POP(DCPLB_DATA6) + PM_POP(DCPLB_DATA5) + PM_POP(DCPLB_DATA4) + PM_POP(DCPLB_DATA3) + PM_POP(DCPLB_DATA2) + PM_POP(DCPLB_DATA1) + PM_POP(DCPLB_DATA0) + PM_POP(DCPLB_ADDR15) + PM_POP(DCPLB_ADDR14) + PM_POP(DCPLB_ADDR13) + PM_POP(DCPLB_ADDR12) + PM_POP(DCPLB_ADDR11) + PM_POP(DCPLB_ADDR10) + PM_POP(DCPLB_ADDR9) + PM_POP(DCPLB_ADDR8) + PM_POP(DCPLB_ADDR7) + PM_POP(DCPLB_ADDR6) + PM_POP(DCPLB_ADDR5) + PM_POP(DCPLB_ADDR4) + PM_POP(DCPLB_ADDR3) + PM_POP(DCPLB_ADDR2) + PM_POP(DCPLB_ADDR1) + PM_POP(DCPLB_ADDR0) + PM_POP(DMEM_CONTROL) + + /* Restore System MMRs */ + + P0.H = hi(PLL_CTL); + P0.L = lo(PLL_CTL); + PM_SYS_POP16(SYSCR) + +#ifdef EBIU_FCTL + PM_SYS_POP(EBIU_FCTL) + PM_SYS_POP(EBIU_MODE) + PM_SYS_POP(EBIU_MBSCTL) +#endif + PM_SYS_POP16(EBIU_AMGCTL) + PM_SYS_POP(EBIU_AMBCTL1) + PM_SYS_POP(EBIU_AMBCTL0) + +#ifdef PINT0_ASSIGN + PM_SYS_POP(PINT3_ASSIGN) + PM_SYS_POP(PINT2_ASSIGN) + PM_SYS_POP(PINT1_ASSIGN) + PM_SYS_POP(PINT0_ASSIGN) +#endif + +#ifdef SICA_IWR1 + PM_SYS_POP(SICA_IWR1) +#endif +#ifdef SICA_IWR0 + PM_SYS_POP(SICA_IWR0) +#endif +#ifdef SIC_IWR2 + PM_SYS_POP(SIC_IWR2) +#endif +#ifdef SIC_IWR1 + PM_SYS_POP(SIC_IWR1) +#endif +#ifdef SIC_IWR0 + PM_SYS_POP(SIC_IWR0) +#endif +#ifdef SIC_IWR + PM_SYS_POP(SIC_IWR) +#endif + +#ifdef SICA_IAR0 + PM_SYS_POP(SICA_IAR7) + PM_SYS_POP(SICA_IAR6) + PM_SYS_POP(SICA_IAR5) + PM_SYS_POP(SICA_IAR4) + PM_SYS_POP(SICA_IAR3) + PM_SYS_POP(SICA_IAR2) + PM_SYS_POP(SICA_IAR1) + PM_SYS_POP(SICA_IAR0) +#endif + +#ifdef SIC_IAR8 + PM_SYS_POP(SIC_IAR11) + PM_SYS_POP(SIC_IAR10) + PM_SYS_POP(SIC_IAR9) + PM_SYS_POP(SIC_IAR8) +#endif +#ifdef SIC_IAR7 + PM_SYS_POP(SIC_IAR7) +#endif +#ifdef SIC_IAR6 + PM_SYS_POP(SIC_IAR6) + PM_SYS_POP(SIC_IAR5) + PM_SYS_POP(SIC_IAR4) +#endif +#ifdef SIC_IAR3 + PM_SYS_POP(SIC_IAR3) +#endif +#ifdef SIC_IAR2 + PM_SYS_POP(SIC_IAR2) + PM_SYS_POP(SIC_IAR1) + PM_SYS_POP(SIC_IAR0) +#endif +#ifdef SICA_IMASK1 + PM_SYS_POP(SICA_IMASK1) +#endif +#ifdef SICA_IMASK0 + PM_SYS_POP(SICA_IMASK0) +#endif +#ifdef SIC_IMASK + PM_SYS_POP(SIC_IMASK) +#endif +#ifdef SIC_IMASK2 + PM_SYS_POP(SIC_IMASK2) +#endif +#ifdef SIC_IMASK1 + PM_SYS_POP(SIC_IMASK1) +#endif +#ifdef SIC_IMASK0 + PM_SYS_POP(SIC_IMASK0) +#endif + + [--sp] = RETI; /* Clear Global Interrupt Disable */ + SP += 4; + + RETS = [SP++]; + ( R7:0, P5:0 ) = [SP++]; + RTS; +ENDPROC(_do_hibernate) diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index 038f70e0be6..eceb484d90f 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -158,23 +158,45 @@ ENTRY(_ex_single_step) cc = r7 == r6; if cc jump _bfin_return_from_exception; + /* Don't do single step in hardware exception handler */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); + r6 = [p5]; + cc = bittst(r6, 5); + if cc jump _bfin_return_from_exception; + +#ifdef CONFIG_KGDB + /* skip single step if current interrupt priority is higher than + * that of the first instruction, from which gdb starts single step */ + r6 >>= 6; + r7 = 10; +.Lfind_priority_start: + cc = bittst(r6, 0); + if cc jump .Lfind_priority_done; + r6 >>= 1; + r7 += -1; + cc = r7 == 0; + if cc jump .Lfind_priority_done; + jump.s .Lfind_priority_start; +.Lfind_priority_done: + p4.l = _debugger_step; + p4.h = _debugger_step; + r6 = [p4]; + cc = r6 == 0; + if cc jump .Ldo_single_step; + r6 += -1; + cc = r6 < r7; + if cc jump _bfin_return_from_exception; +.Ldo_single_step: +#endif + /* If we were in user mode, do the single step normally. */ - p5.l = lo(IPEND); - p5.h = hi(IPEND); r6 = [p5]; r7 = 0xffe0 (z); r7 = r7 & r6; cc = r7 == 0; - if !cc jump 1f; - - /* Single stepping only a single instruction, so clear the trace - * bit here. */ - r7 = syscfg; - bitclr (r7, 0); - syscfg = R7; - jump _ex_trap_c; + if cc jump 1f; -1: /* * We were in an interrupt handler. By convention, all of them save * SYSCFG with their first instruction, so by checking whether our @@ -202,11 +224,15 @@ ENTRY(_ex_single_step) cc = R7 == R6; if !cc jump _bfin_return_from_exception; +1: + /* Single stepping only a single instruction, so clear the trace + * bit here. */ r7 = syscfg; bitclr (r7, 0); syscfg = R7; - /* Fall through to _bfin_return_from_exception. */ + jump _ex_trap_c; + ENDPROC(_ex_single_step) ENTRY(_bfin_return_from_exception) diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index f5fd768022e..64d746114e4 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -459,6 +459,8 @@ static struct irq_chip bfin_gpio_irqchip = { .mask = bfin_gpio_mask_irq, .mask_ack = bfin_gpio_mask_ack_irq, .unmask = bfin_gpio_unmask_irq, + .disable = bfin_gpio_mask_irq, + .enable = bfin_gpio_unmask_irq, .set_type = bfin_gpio_irq_type, .startup = bfin_gpio_irq_startup, .shutdown = bfin_gpio_irq_shutdown, @@ -846,6 +848,8 @@ static struct irq_chip bfin_gpio_irqchip = { .mask = bfin_gpio_mask_irq, .mask_ack = bfin_gpio_mask_ack_irq, .unmask = bfin_gpio_unmask_irq, + .disable = bfin_gpio_mask_irq, + .enable = bfin_gpio_unmask_irq, .set_type = bfin_gpio_irq_type, .startup = bfin_gpio_irq_startup, .shutdown = bfin_gpio_irq_shutdown, diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 0be805ca423..4fe6a2366b1 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -38,8 +38,9 @@ #include <linux/io.h> #include <linux/irq.h> -#include <asm/dpmc.h> #include <asm/gpio.h> +#include <asm/dma.h> +#include <asm/dpmc.h> #ifdef CONFIG_PM_WAKEUP_GPIO_POLAR_H #define WAKEUP_TYPE PM_WAKE_HIGH @@ -61,16 +62,17 @@ #define WAKEUP_TYPE PM_WAKE_BOTH_EDGES #endif + void bfin_pm_suspend_standby_enter(void) { + unsigned long flags; + #ifdef CONFIG_PM_WAKEUP_BY_GPIO gpio_pm_wakeup_request(CONFIG_PM_WAKEUP_GPIO_NUMBER, WAKEUP_TYPE); #endif - u32 flags; - local_irq_save(flags); - bfin_pm_setup(); + bfin_pm_standby_setup(); #ifdef CONFIG_PM_BFIN_SLEEP_DEEPER sleep_deeper(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); @@ -78,7 +80,7 @@ void bfin_pm_suspend_standby_enter(void) sleep_mode(bfin_sic_iwr[0], bfin_sic_iwr[1], bfin_sic_iwr[2]); #endif - bfin_pm_restore(); + bfin_pm_standby_restore(); #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) bfin_write_SIC_IWR0(IWR_ENABLE_ALL); @@ -93,6 +95,195 @@ void bfin_pm_suspend_standby_enter(void) local_irq_restore(flags); } +int bf53x_suspend_l1_mem(unsigned char *memptr) +{ + dma_memcpy(memptr, (const void *) L1_CODE_START, L1_CODE_LENGTH); + dma_memcpy(memptr + L1_CODE_LENGTH, (const void *) L1_DATA_A_START, + L1_DATA_A_LENGTH); + dma_memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH, + (const void *) L1_DATA_B_START, L1_DATA_B_LENGTH); + memcpy(memptr + L1_CODE_LENGTH + L1_DATA_A_LENGTH + + L1_DATA_B_LENGTH, (const void *) L1_SCRATCH_START, + L1_SCRATCH_LENGTH); + + return 0; +} + +int bf53x_resume_l1_mem(unsigned char *memptr) +{ + dma_memcpy((void *) L1_CODE_START, memptr, L1_CODE_LENGTH); + dma_memcpy((void *) L1_DATA_A_START, memptr + L1_CODE_LENGTH, + L1_DATA_A_LENGTH); + dma_memcpy((void *) L1_DATA_B_START, memptr + L1_CODE_LENGTH + + L1_DATA_A_LENGTH, L1_DATA_B_LENGTH); + memcpy((void *) L1_SCRATCH_START, memptr + L1_CODE_LENGTH + + L1_DATA_A_LENGTH + L1_DATA_B_LENGTH, L1_SCRATCH_LENGTH); + + return 0; +} + +#ifdef CONFIG_BFIN_WB +static void flushinv_all_dcache(void) +{ + u32 way, bank, subbank, set; + u32 status, addr; + u32 dmem_ctl = bfin_read_DMEM_CONTROL(); + + for (bank = 0; bank < 2; ++bank) { + if (!(dmem_ctl & (1 << (DMC1_P - bank)))) + continue; + + for (way = 0; way < 2; ++way) + for (subbank = 0; subbank < 4; ++subbank) + for (set = 0; set < 64; ++set) { + + bfin_write_DTEST_COMMAND( + way << 26 | + bank << 23 | + subbank << 16 | + set << 5 + ); + CSYNC(); + status = bfin_read_DTEST_DATA0(); + + /* only worry about valid/dirty entries */ + if ((status & 0x3) != 0x3) + continue; + + /* construct the address using the tag */ + addr = (status & 0xFFFFC800) | (subbank << 12) | (set << 5); + + /* flush it */ + __asm__ __volatile__("FLUSHINV[%0];" : : "a"(addr)); + } + } +} +#endif + +static inline void dcache_disable(void) +{ +#ifdef CONFIG_BFIN_DCACHE + unsigned long ctrl; + +#ifdef CONFIG_BFIN_WB + flushinv_all_dcache(); +#endif + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl &= ~ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void dcache_enable(void) +{ +#ifdef CONFIG_BFIN_DCACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_DMEM_CONTROL(); + ctrl |= ENDCPLB; + bfin_write_DMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void icache_disable(void) +{ +#ifdef CONFIG_BFIN_ICACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl &= ~ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +static inline void icache_enable(void) +{ +#ifdef CONFIG_BFIN_ICACHE + unsigned long ctrl; + SSYNC(); + ctrl = bfin_read_IMEM_CONTROL(); + ctrl |= ENICPLB; + bfin_write_IMEM_CONTROL(ctrl); + SSYNC(); +#endif +} + +int bfin_pm_suspend_mem_enter(void) +{ + unsigned long flags; + int wakeup, ret; + + unsigned char *memptr = kmalloc(L1_CODE_LENGTH + L1_DATA_A_LENGTH + + L1_DATA_B_LENGTH + L1_SCRATCH_LENGTH, + GFP_KERNEL); + + if (memptr == NULL) { + panic("bf53x_suspend_l1_mem malloc failed"); + return -ENOMEM; + } + + wakeup = bfin_read_VR_CTL() & ~FREQ; + wakeup |= SCKELOW; + + /* FIXME: merge this somehow with set_irq_wake */ +#ifdef CONFIG_PM_BFIN_WAKE_RTC + wakeup |= WAKE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_PH6 + wakeup |= PHYWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_CAN + wakeup |= CANWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_GP + wakeup |= GPWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_USB + wakeup |= USBWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD + wakeup |= KPADWE; +#endif +#ifdef CONFIG_PM_BFIN_WAKE_ROTARY + wakeup |= ROTWE; +#endif + + local_irq_save(flags); + + ret = blackfin_dma_suspend(); + + if (ret) { + local_irq_restore(flags); + kfree(memptr); + return ret; + } + + bfin_gpio_pm_hibernate_suspend(); + + dcache_disable(); + icache_disable(); + bf53x_suspend_l1_mem(memptr); + + do_hibernate(wakeup); /* Goodbye */ + + bf53x_resume_l1_mem(memptr); + + icache_enable(); + dcache_enable(); + + bfin_gpio_pm_hibernate_restore(); + blackfin_dma_resume(); + + local_irq_restore(flags); + kfree(memptr); + + return 0; +} + /* * bfin_pm_valid - Tell the PM core that we only support the standby sleep * state @@ -101,7 +292,24 @@ void bfin_pm_suspend_standby_enter(void) */ static int bfin_pm_valid(suspend_state_t state) { - return (state == PM_SUSPEND_STANDBY); + return (state == PM_SUSPEND_STANDBY +#ifndef BF533_FAMILY + /* + * On BF533/2/1: + * If we enter Hibernate the SCKE Pin is driven Low, + * so that the SDRAM enters Self Refresh Mode. + * However when the reset sequence that follows hibernate + * state is executed, SCKE is driven High, taking the + * SDRAM out of Self Refresh. + * + * If you reconfigure and access the SDRAM "very quickly", + * you are likely to avoid errors, otherwise the SDRAM + * start losing its contents. + * An external HW workaround is possible using logic gates. + */ + || state == PM_SUSPEND_MEM +#endif + ); } /* @@ -115,10 +323,9 @@ static int bfin_pm_enter(suspend_state_t state) case PM_SUSPEND_STANDBY: bfin_pm_suspend_standby_enter(); break; - case PM_SUSPEND_MEM: - return -ENOTSUPP; - + bfin_pm_suspend_mem_enter(); + break; default: return -EINVAL; } diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 3246f91c7ba..5af3c31c936 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -41,215 +41,309 @@ #include <asm/blackfin.h> #include "blackfin_sram.h" -spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; - -#if CONFIG_L1_MAX_PIECE < 16 -#undef CONFIG_L1_MAX_PIECE -#define CONFIG_L1_MAX_PIECE 16 -#endif - -#if CONFIG_L1_MAX_PIECE > 1024 -#undef CONFIG_L1_MAX_PIECE -#define CONFIG_L1_MAX_PIECE 1024 -#endif - -#define SRAM_SLT_NULL 0 -#define SRAM_SLT_FREE 1 -#define SRAM_SLT_ALLOCATED 2 +static spinlock_t l1sram_lock, l1_data_sram_lock, l1_inst_sram_lock; +static spinlock_t l2_sram_lock; /* the data structure for L1 scratchpad and DATA SRAM */ -struct l1_sram_piece { +struct sram_piece { void *paddr; int size; - int flag; pid_t pid; + struct sram_piece *next; }; -static struct l1_sram_piece l1_ssram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_ssram_head, used_l1_ssram_head; #if L1_DATA_A_LENGTH != 0 -static struct l1_sram_piece l1_data_A_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_data_A_sram_head, used_l1_data_A_sram_head; #endif #if L1_DATA_B_LENGTH != 0 -static struct l1_sram_piece l1_data_B_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; #endif #if L1_CODE_LENGTH != 0 -static struct l1_sram_piece l1_inst_sram[CONFIG_L1_MAX_PIECE]; +static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; +#endif + +#ifdef L2_LENGTH +static struct sram_piece free_l2_sram_head, used_l2_sram_head; #endif +static struct kmem_cache *sram_piece_cache; + /* L1 Scratchpad SRAM initialization function */ -void __init l1sram_init(void) +static void __init l1sram_init(void) { - printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", - L1_SCRATCH_LENGTH >> 10); + free_l1_ssram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_ssram_head.next) { + printk(KERN_INFO"Fail to initialize Scratchpad data SRAM.\n"); + return; + } + + free_l1_ssram_head.next->paddr = (void *)L1_SCRATCH_START; + free_l1_ssram_head.next->size = L1_SCRATCH_LENGTH; + free_l1_ssram_head.next->pid = 0; + free_l1_ssram_head.next->next = NULL; - memset(&l1_ssram, 0x00, sizeof(l1_ssram)); - l1_ssram[0].paddr = (void *)L1_SCRATCH_START; - l1_ssram[0].size = L1_SCRATCH_LENGTH; - l1_ssram[0].flag = SRAM_SLT_FREE; + used_l1_ssram_head.next = NULL; /* mutex initialize */ spin_lock_init(&l1sram_lock); + + printk(KERN_INFO "Blackfin Scratchpad data SRAM: %d KB\n", + L1_SCRATCH_LENGTH >> 10); } -void __init l1_data_sram_init(void) +static void __init l1_data_sram_init(void) { #if L1_DATA_A_LENGTH != 0 - memset(&l1_data_A_sram, 0x00, sizeof(l1_data_A_sram)); - l1_data_A_sram[0].paddr = (void *)L1_DATA_A_START + - (_ebss_l1 - _sdata_l1); - l1_data_A_sram[0].size = L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); - l1_data_A_sram[0].flag = SRAM_SLT_FREE; - - printk(KERN_INFO "Blackfin Data A SRAM: %d KB (%d KB free)\n", - L1_DATA_A_LENGTH >> 10, l1_data_A_sram[0].size >> 10); + free_l1_data_A_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_data_A_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Data A SRAM.\n"); + return; + } + + free_l1_data_A_sram_head.next->paddr = + (void *)L1_DATA_A_START + (_ebss_l1 - _sdata_l1); + free_l1_data_A_sram_head.next->size = + L1_DATA_A_LENGTH - (_ebss_l1 - _sdata_l1); + free_l1_data_A_sram_head.next->pid = 0; + free_l1_data_A_sram_head.next->next = NULL; + + used_l1_data_A_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Data A SRAM: %d KB (%d KB free)\n", + L1_DATA_A_LENGTH >> 10, + free_l1_data_A_sram_head.next->size >> 10); #endif #if L1_DATA_B_LENGTH != 0 - memset(&l1_data_B_sram, 0x00, sizeof(l1_data_B_sram)); - l1_data_B_sram[0].paddr = (void *)L1_DATA_B_START + - (_ebss_b_l1 - _sdata_b_l1); - l1_data_B_sram[0].size = L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); - l1_data_B_sram[0].flag = SRAM_SLT_FREE; - - printk(KERN_INFO "Blackfin Data B SRAM: %d KB (%d KB free)\n", - L1_DATA_B_LENGTH >> 10, l1_data_B_sram[0].size >> 10); + free_l1_data_B_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_data_B_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Data B SRAM.\n"); + return; + } + + free_l1_data_B_sram_head.next->paddr = + (void *)L1_DATA_B_START + (_ebss_b_l1 - _sdata_b_l1); + free_l1_data_B_sram_head.next->size = + L1_DATA_B_LENGTH - (_ebss_b_l1 - _sdata_b_l1); + free_l1_data_B_sram_head.next->pid = 0; + free_l1_data_B_sram_head.next->next = NULL; + + used_l1_data_B_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Data B SRAM: %d KB (%d KB free)\n", + L1_DATA_B_LENGTH >> 10, + free_l1_data_B_sram_head.next->size >> 10); #endif /* mutex initialize */ spin_lock_init(&l1_data_sram_lock); } -void __init l1_inst_sram_init(void) +static void __init l1_inst_sram_init(void) { #if L1_CODE_LENGTH != 0 - memset(&l1_inst_sram, 0x00, sizeof(l1_inst_sram)); - l1_inst_sram[0].paddr = (void *)L1_CODE_START + (_etext_l1 - _stext_l1); - l1_inst_sram[0].size = L1_CODE_LENGTH - (_etext_l1 - _stext_l1); - l1_inst_sram[0].flag = SRAM_SLT_FREE; + free_l1_inst_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l1_inst_sram_head.next) { + printk(KERN_INFO"Fail to initialize L1 Instruction SRAM.\n"); + return; + } - printk(KERN_INFO "Blackfin Instruction SRAM: %d KB (%d KB free)\n", - L1_CODE_LENGTH >> 10, l1_inst_sram[0].size >> 10); + free_l1_inst_sram_head.next->paddr = + (void *)L1_CODE_START + (_etext_l1 - _stext_l1); + free_l1_inst_sram_head.next->size = + L1_CODE_LENGTH - (_etext_l1 - _stext_l1); + free_l1_inst_sram_head.next->pid = 0; + free_l1_inst_sram_head.next->next = NULL; + + used_l1_inst_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L1 Instruction SRAM: %d KB (%d KB free)\n", + L1_CODE_LENGTH >> 10, + free_l1_inst_sram_head.next->size >> 10); #endif /* mutex initialize */ spin_lock_init(&l1_inst_sram_lock); } -/* L1 memory allocate function */ -static void *_l1_sram_alloc(size_t size, struct l1_sram_piece *pfree, int count) +static void __init l2_sram_init(void) { - int i, index = 0; - void *addr = NULL; +#ifdef L2_LENGTH + free_l2_sram_head.next = + kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + if (!free_l2_sram_head.next) { + printk(KERN_INFO"Fail to initialize L2 SRAM.\n"); + return; + } - if (size <= 0) + free_l2_sram_head.next->paddr = (void *)L2_START + + (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->size = L2_LENGTH - + (_etext_l2 - _stext_l2) + (_edata_l2 - _sdata_l2); + free_l2_sram_head.next->pid = 0; + free_l2_sram_head.next->next = NULL; + + used_l2_sram_head.next = NULL; + + printk(KERN_INFO "Blackfin L2 SRAM: %d KB (%d KB free)\n", + L2_LENGTH >> 10, + free_l2_sram_head.next->size >> 10); +#endif + + /* mutex initialize */ + spin_lock_init(&l2_sram_lock); +} +void __init bfin_sram_init(void) +{ + sram_piece_cache = kmem_cache_create("sram_piece_cache", + sizeof(struct sram_piece), + 0, SLAB_PANIC, NULL); + + l1sram_init(); + l1_data_sram_init(); + l1_inst_sram_init(); + l2_sram_init(); +} + +/* SRAM allocate function */ +static void *_sram_alloc(size_t size, struct sram_piece *pfree_head, + struct sram_piece *pused_head) +{ + struct sram_piece *pslot, *plast, *pavail; + + if (size <= 0 || !pfree_head || !pused_head) return NULL; /* Align the size */ size = (size + 3) & ~3; - /* not use the good method to match the best slot !!! */ - /* search an available memory slot */ - for (i = 0; i < count; i++) { - if ((pfree[i].flag == SRAM_SLT_FREE) - && (pfree[i].size >= size)) { - addr = pfree[i].paddr; - pfree[i].flag = SRAM_SLT_ALLOCATED; - pfree[i].pid = current->pid; - index = i; - break; - } + pslot = pfree_head->next; + plast = pfree_head; + + /* search an available piece slot */ + while (pslot != NULL && size > pslot->size) { + plast = pslot; + pslot = pslot->next; } - if (i >= count) + + if (!pslot) return NULL; - /* updated the NULL memory slot !!! */ - if (pfree[i].size > size) { - for (i = 0; i < count; i++) { - if (pfree[i].flag == SRAM_SLT_NULL) { - pfree[i].pid = 0; - pfree[i].flag = SRAM_SLT_FREE; - pfree[i].paddr = addr + size; - pfree[i].size = pfree[index].size - size; - pfree[index].size = size; - break; - } - } + if (pslot->size == size) { + plast->next = pslot->next; + pavail = pslot; + } else { + pavail = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); + + if (!pavail) + return NULL; + + pavail->paddr = pslot->paddr; + pavail->size = size; + pslot->paddr += size; + pslot->size -= size; } - return addr; + pavail->pid = current->pid; + + pslot = pused_head->next; + plast = pused_head; + + /* insert new piece into used piece list !!! */ + while (pslot != NULL && pavail->paddr < pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + pavail->next = pslot; + plast->next = pavail; + + return pavail->paddr; } /* Allocate the largest available block. */ -static void *_l1_sram_alloc_max(struct l1_sram_piece *pfree, int count, +static void *_sram_alloc_max(struct sram_piece *pfree_head, + struct sram_piece *pused_head, unsigned long *psize) { - unsigned long best = 0; - int i, index = -1; - void *addr = NULL; + struct sram_piece *pslot, *pmax; - /* search an available memory slot */ - for (i = 0; i < count; i++) { - if (pfree[i].flag == SRAM_SLT_FREE && pfree[i].size > best) { - addr = pfree[i].paddr; - index = i; - best = pfree[i].size; - } + if (!pfree_head || !pused_head) + return NULL; + + pmax = pslot = pfree_head->next; + + /* search an available piece slot */ + while (pslot != NULL) { + if (pslot->size > pmax->size) + pmax = pslot; + pslot = pslot->next; } - if (index < 0) + + if (!pmax) return NULL; - *psize = best; - pfree[index].pid = current->pid; - pfree[index].flag = SRAM_SLT_ALLOCATED; - return addr; + *psize = pmax->size; + + return _sram_alloc(*psize, pfree_head, pused_head); } -/* L1 memory free function */ -static int _l1_sram_free(const void *addr, - struct l1_sram_piece *pfree, - int count) +/* SRAM free function */ +static int _sram_free(const void *addr, + struct sram_piece *pfree_head, + struct sram_piece *pused_head) { - int i, index = 0; + struct sram_piece *pslot, *plast, *pavail; + + if (!pfree_head || !pused_head) + return -1; /* search the relevant memory slot */ - for (i = 0; i < count; i++) { - if (pfree[i].paddr == addr) { - if (pfree[i].flag != SRAM_SLT_ALLOCATED) { - /* error log */ - return -1; - } - index = i; - break; - } + pslot = pused_head->next; + plast = pused_head; + + /* search an available piece slot */ + while (pslot != NULL && pslot->paddr != addr) { + plast = pslot; + pslot = pslot->next; } - if (i >= count) + + if (!pslot) return -1; - pfree[index].pid = 0; - pfree[index].flag = SRAM_SLT_FREE; - - /* link the next address slot */ - for (i = 0; i < count; i++) { - if (((pfree[index].paddr + pfree[index].size) == pfree[i].paddr) - && (pfree[i].flag == SRAM_SLT_FREE)) { - pfree[i].pid = 0; - pfree[i].flag = SRAM_SLT_NULL; - pfree[index].size += pfree[i].size; - pfree[index].flag = SRAM_SLT_FREE; - break; - } + plast->next = pslot->next; + pavail = pslot; + pavail->pid = 0; + + /* insert free pieces back to the free list */ + pslot = pfree_head->next; + plast = pfree_head; + + while (pslot != NULL && addr > pslot->paddr) { + plast = pslot; + pslot = pslot->next; + } + + if (plast != pfree_head && plast->paddr + plast->size == pavail->paddr) { + plast->size += pavail->size; + kmem_cache_free(sram_piece_cache, pavail); + } else { + pavail->next = plast; + plast->next = pavail; + plast = pavail; } - /* link the last address slot */ - for (i = 0; i < count; i++) { - if (((pfree[i].paddr + pfree[i].size) == pfree[index].paddr) && - (pfree[i].flag == SRAM_SLT_FREE)) { - pfree[index].flag = SRAM_SLT_NULL; - pfree[i].size += pfree[index].size; - break; - } + if (pslot && plast->paddr + plast->size == pslot->paddr) { + plast->size += pslot->size; + plast->next = pslot->next; + kmem_cache_free(sram_piece_cache, pslot); } return 0; @@ -273,6 +367,11 @@ int sram_free(const void *addr) && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); #endif +#ifdef L2_LENGTH + else if (addr >= (void *)L2_START + && addr < (void *)(L2_START + L2_LENGTH)) + return l2_sram_free(addr); +#endif else return -1; } @@ -287,7 +386,8 @@ void *l1_data_A_sram_alloc(size_t size) spin_lock_irqsave(&l1_data_sram_lock, flags); #if L1_DATA_A_LENGTH != 0 - addr = _l1_sram_alloc(size, l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + addr = _sram_alloc(size, &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head); #endif /* add mutex operation */ @@ -309,8 +409,8 @@ int l1_data_A_sram_free(const void *addr) spin_lock_irqsave(&l1_data_sram_lock, flags); #if L1_DATA_A_LENGTH != 0 - ret = _l1_sram_free(addr, - l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + ret = _sram_free(addr, &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head); #else ret = -1; #endif @@ -331,7 +431,8 @@ void *l1_data_B_sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1_data_sram_lock, flags); - addr = _l1_sram_alloc(size, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + addr = _sram_alloc(size, &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_data_sram_lock, flags); @@ -355,7 +456,8 @@ int l1_data_B_sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1_data_sram_lock, flags); - ret = _l1_sram_free(addr, l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + ret = _sram_free(addr, &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_data_sram_lock, flags); @@ -408,7 +510,8 @@ void *l1_inst_sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1_inst_sram_lock, flags); - addr = _l1_sram_alloc(size, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + addr = _sram_alloc(size, &free_l1_inst_sram_head, + &used_l1_inst_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_inst_sram_lock, flags); @@ -432,7 +535,8 @@ int l1_inst_sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1_inst_sram_lock, flags); - ret = _l1_sram_free(addr, l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + ret = _sram_free(addr, &free_l1_inst_sram_head, + &used_l1_inst_sram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1_inst_sram_lock, flags); @@ -453,7 +557,8 @@ void *l1sram_alloc(size_t size) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - addr = _l1_sram_alloc(size, l1_ssram, ARRAY_SIZE(l1_ssram)); + addr = _sram_alloc(size, &free_l1_ssram_head, + &used_l1_ssram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -470,7 +575,8 @@ void *l1sram_alloc_max(size_t *psize) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - addr = _l1_sram_alloc_max(l1_ssram, ARRAY_SIZE(l1_ssram), psize); + addr = _sram_alloc_max(&free_l1_ssram_head, + &used_l1_ssram_head, psize); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -487,7 +593,8 @@ int l1sram_free(const void *addr) /* add mutex operation */ spin_lock_irqsave(&l1sram_lock, flags); - ret = _l1_sram_free(addr, l1_ssram, ARRAY_SIZE(l1_ssram)); + ret = _sram_free(addr, &free_l1_ssram_head, + &used_l1_ssram_head); /* add mutex operation */ spin_unlock_irqrestore(&l1sram_lock, flags); @@ -495,6 +602,64 @@ int l1sram_free(const void *addr) return ret; } +void *l2_sram_alloc(size_t size) +{ +#ifdef L2_LENGTH + unsigned flags; + void *addr; + + /* add mutex operation */ + spin_lock_irqsave(&l2_sram_lock, flags); + + addr = _sram_alloc(size, &free_l2_sram_head, + &used_l2_sram_head); + + /* add mutex operation */ + spin_unlock_irqrestore(&l2_sram_lock, flags); + + pr_debug("Allocated address in l2_sram_alloc is 0x%lx+0x%lx\n", + (long unsigned int)addr, size); + + return addr; +#else + return NULL; +#endif +} +EXPORT_SYMBOL(l2_sram_alloc); + +void *l2_sram_zalloc(size_t size) +{ + void *addr = l2_sram_alloc(size); + + if (addr) + memset(addr, 0x00, size); + + return addr; +} +EXPORT_SYMBOL(l2_sram_zalloc); + +int l2_sram_free(const void *addr) +{ +#ifdef L2_LENGTH + unsigned flags; + int ret; + + /* add mutex operation */ + spin_lock_irqsave(&l2_sram_lock, flags); + + ret = _sram_free(addr, &free_l2_sram_head, + &used_l2_sram_head); + + /* add mutex operation */ + spin_unlock_irqrestore(&l2_sram_lock, flags); + + return ret; +#else + return -1; +#endif +} +EXPORT_SYMBOL(l2_sram_free); + int sram_free_with_lsl(const void *addr) { struct sram_list_struct *lsl, **tmp; @@ -533,6 +698,9 @@ void *sram_alloc_with_lsl(size_t size, unsigned long flags) if (addr == NULL && (flags & L1_DATA_B_SRAM)) addr = l1_data_B_sram_alloc(size); + if (addr == NULL && (flags & L2_SRAM)) + addr = l2_sram_alloc(size); + if (addr == NULL) { kfree(lsl); return NULL; @@ -549,49 +717,80 @@ EXPORT_SYMBOL(sram_alloc_with_lsl); /* Once we get a real allocator, we'll throw all of this away. * Until then, we need some sort of visibility into the L1 alloc. */ -static void _l1sram_proc_read(char *buf, int *len, const char *desc, - struct l1_sram_piece *pfree, const int array_size) +/* Need to keep line of output the same. Currently, that is 44 bytes + * (including newline). + */ +static int _sram_proc_read(char *buf, int *len, int count, const char *desc, + struct sram_piece *pfree_head, + struct sram_piece *pused_head) { - int i; - - *len += sprintf(&buf[*len], "--- L1 %-14s Size PID State\n", desc); - for (i = 0; i < array_size; ++i) { - const char *alloc_type; - switch (pfree[i].flag) { - case SRAM_SLT_NULL: alloc_type = "NULL"; break; - case SRAM_SLT_FREE: alloc_type = "FREE"; break; - case SRAM_SLT_ALLOCATED: alloc_type = "ALLOCATED"; break; - default: alloc_type = "????"; break; - } - *len += sprintf(&buf[*len], "%p-%p %8i %4i %s\n", - pfree[i].paddr, pfree[i].paddr + pfree[i].size, - pfree[i].size, pfree[i].pid, alloc_type); + struct sram_piece *pslot; + + if (!pfree_head || !pused_head) + return -1; + + *len += sprintf(&buf[*len], "--- SRAM %-14s Size PID State \n", desc); + + /* search the relevant memory slot */ + pslot = pused_head->next; + + while (pslot != NULL) { + *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "ALLOCATED"); + + pslot = pslot->next; } + + pslot = pfree_head->next; + + while (pslot != NULL) { + *len += sprintf(&buf[*len], "%p-%p %10i %5i %-10s\n", + pslot->paddr, pslot->paddr + pslot->size, + pslot->size, pslot->pid, "FREE"); + + pslot = pslot->next; + } + + return 0; } -static int l1sram_proc_read(char *buf, char **start, off_t offset, int count, +static int sram_proc_read(char *buf, char **start, off_t offset, int count, int *eof, void *data) { int len = 0; - _l1sram_proc_read(buf, &len, "Scratchpad", - l1_ssram, ARRAY_SIZE(l1_ssram)); + if (_sram_proc_read(buf, &len, count, "Scratchpad", + &free_l1_ssram_head, &used_l1_ssram_head)) + goto not_done; #if L1_DATA_A_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Data A", - l1_data_A_sram, ARRAY_SIZE(l1_data_A_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Data A", + &free_l1_data_A_sram_head, + &used_l1_data_A_sram_head)) + goto not_done; #endif #if L1_DATA_B_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Data B", - l1_data_B_sram, ARRAY_SIZE(l1_data_B_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Data B", + &free_l1_data_B_sram_head, + &used_l1_data_B_sram_head)) + goto not_done; #endif #if L1_CODE_LENGTH != 0 - _l1sram_proc_read(buf, &len, "Instruction", - l1_inst_sram, ARRAY_SIZE(l1_inst_sram)); + if (_sram_proc_read(buf, &len, count, "L1 Instruction", + &free_l1_inst_sram_head, &used_l1_inst_sram_head)) + goto not_done; +#endif +#ifdef L2_LENGTH + if (_sram_proc_read(buf, &len, count, "L2", + &free_l2_sram_head, &used_l2_sram_head)) + goto not_done; #endif + *eof = 1; + not_done: return len; } -static int __init l1sram_proc_init(void) +static int __init sram_proc_init(void) { struct proc_dir_entry *ptr; ptr = create_proc_entry("sram", S_IFREG | S_IRUGO, NULL); @@ -600,8 +799,8 @@ static int __init l1sram_proc_init(void) return -1; } ptr->owner = THIS_MODULE; - ptr->read_proc = l1sram_proc_read; + ptr->read_proc = sram_proc_read; return 0; } -late_initcall(l1sram_proc_init); +late_initcall(sram_proc_init); #endif diff --git a/arch/blackfin/mm/blackfin_sram.h b/arch/blackfin/mm/blackfin_sram.h index 0fb73b78dd6..8cb0945563f 100644 --- a/arch/blackfin/mm/blackfin_sram.h +++ b/arch/blackfin/mm/blackfin_sram.h @@ -30,9 +30,7 @@ #ifndef __BLACKFIN_SRAM_H__ #define __BLACKFIN_SRAM_H__ -extern void l1sram_init(void); -extern void l1_inst_sram_init(void); -extern void l1_data_sram_init(void); +extern void bfin_sram_init(void); extern void *l1sram_alloc(size_t); #endif diff --git a/arch/blackfin/mm/init.c b/arch/blackfin/mm/init.c index ec3141fefd2..bc240abb874 100644 --- a/arch/blackfin/mm/init.c +++ b/arch/blackfin/mm/init.c @@ -53,33 +53,6 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - int cached = 0; - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map + i)) - reserved++; - else if (PageSwapCache(mem_map + i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d free pages\n", free); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. @@ -164,11 +137,14 @@ void __init mem_init(void) "(%uk init code, %uk kernel code, %uk data, %uk dma, %uk reserved)\n", (unsigned long) freepages << (PAGE_SHIFT-10), _ramend >> 10, initk, codek, datak, DMA_UNCACHED_REGION >> 10, (reservedpages << (PAGE_SHIFT-10))); +} + +static int __init sram_init(void) +{ + unsigned long tmp; /* Initialize the blackfin L1 Memory. */ - l1sram_init(); - l1_data_sram_init(); - l1_inst_sram_init(); + bfin_sram_init(); /* Allocate this once; never free it. We assume this gives us a pointer to the start of L1 scratchpad memory; panic if it @@ -179,7 +155,10 @@ void __init mem_init(void) tmp, (unsigned long)L1_SCRATCH_TASK_INFO); panic("No L1, time to give up\n"); } + + return 0; } +pure_initcall(sram_init); static void __init free_init_pages(const char *what, unsigned long begin, unsigned long end) { diff --git a/arch/cris/arch-v10/kernel/kgdb.c b/arch/cris/arch-v10/kernel/kgdb.c index a3ca5515074..6fea45f2e40 100644 --- a/arch/cris/arch-v10/kernel/kgdb.c +++ b/arch/cris/arch-v10/kernel/kgdb.c @@ -278,14 +278,6 @@ void putDebugChar (int val); void enableDebugIRQ (void); -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static char highhex (int x); - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static char lowhex (int x); - /* Returns the integer equivalent of a hexadecimal character. */ static int hex (char ch); @@ -356,9 +348,6 @@ extern unsigned char executing_task; /* Run-length encoding maximum length. Send 64 at most. */ #define RUNLENMAX 64 -/* Definition of all valid hexadecimal characters */ -static const char hexchars[] = "0123456789abcdef"; - /* The inbound/outbound buffers used in packet I/O */ static char remcomInBuffer[BUFMAX]; static char remcomOutBuffer[BUFMAX]; @@ -499,8 +488,8 @@ gdb_cris_strtol (const char *s, char **endptr, int base) char *sd; int x = 0; - for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) - x = x * base + (sd - hexchars); + for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hex_asc); if (endptr) { @@ -670,22 +659,6 @@ read_register (char regno, unsigned int *valptr) } /********************************** Packet I/O ******************************/ -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static inline char -highhex(int x) -{ - return hexchars[(x >> 4) & 0xf]; -} - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static inline char -lowhex(int x) -{ - return hexchars[x & 0xf]; -} - /* Returns the integer equivalent of a hexadecimal character. */ static int hex (char ch) @@ -721,8 +694,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } } @@ -857,9 +829,9 @@ putpacket(char *buffer) src++; } } - putDebugChar ('#'); - putDebugChar (highhex (checksum)); - putDebugChar (lowhex (checksum)); + putDebugChar('#'); + putDebugChar(hex_asc_hi(checksum)); + putDebugChar(hex_asc_lo(checksum)); } while(kgdb_started && (getDebugChar() != '+')); } @@ -895,9 +867,8 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ - *ptr++ = 'T'; - *ptr++ = highhex (sigval); - *ptr++ = lowhex (sigval); + *ptr++ = 'T'; + ptr = pack_hex_byte(ptr, sigval); /* Send register contents. We probably only need to send the * PC, frame pointer and stack pointer here. Other registers will be @@ -910,9 +881,7 @@ stub_is_stopped(int sigval) status = read_register (regno, ®_cont); if (status == SUCCESS) { - - *ptr++ = highhex (regno); - *ptr++ = lowhex (regno); + ptr = pack_hex_byte(ptr, regno); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, @@ -937,8 +906,8 @@ stub_is_stopped(int sigval) /* Store thread:r...; with the executing task TID. */ gdb_cris_strcpy (&remcomOutBuffer[pos], "thread:"); pos += gdb_cris_strlen ("thread:"); - remcomOutBuffer[pos++] = highhex (executing_task); - remcomOutBuffer[pos++] = lowhex (executing_task); + remcomOutBuffer[pos++] = hex_asc_hi(executing_task); + remcomOutBuffer[pos++] = hex_asc_lo(executing_task); gdb_cris_strcpy (&remcomOutBuffer[pos], ";"); #endif @@ -1126,8 +1095,8 @@ handle_exception (int sigval) Success: SAA, where AA is the signal number. Failure: void. */ remcomOutBuffer[0] = 'S'; - remcomOutBuffer[1] = highhex (sigval); - remcomOutBuffer[2] = lowhex (sigval); + remcomOutBuffer[1] = hex_asc_hi(sigval); + remcomOutBuffer[2] = hex_asc_lo(sigval); remcomOutBuffer[3] = 0; break; @@ -1224,23 +1193,23 @@ handle_exception (int sigval) case 'C': /* Identify the remote current thread. */ gdb_cris_strcpy (&remcomOutBuffer[0], "QC"); - remcomOutBuffer[2] = highhex (current_thread_c); - remcomOutBuffer[3] = lowhex (current_thread_c); + remcomOutBuffer[2] = hex_asc_hi(current_thread_c); + remcomOutBuffer[3] = hex_asc_lo(current_thread_c); remcomOutBuffer[4] = '\0'; break; case 'L': gdb_cris_strcpy (&remcomOutBuffer[0], "QM"); /* Reply with number of threads. */ if (os_is_started()) { - remcomOutBuffer[2] = highhex (number_of_tasks); - remcomOutBuffer[3] = lowhex (number_of_tasks); + remcomOutBuffer[2] = hex_asc_hi(number_of_tasks); + remcomOutBuffer[3] = hex_asc_lo(number_of_tasks); } else { - remcomOutBuffer[2] = highhex (0); - remcomOutBuffer[3] = lowhex (1); + remcomOutBuffer[2] = hex_asc_hi(0); + remcomOutBuffer[3] = hex_asc_lo(1); } /* Done with the reply. */ - remcomOutBuffer[4] = lowhex (1); + remcomOutBuffer[4] = hex_asc_lo(1); pos = 5; /* Expects the argument thread id. */ for (; pos < (5 + HEXCHARS_IN_THREAD_ID); pos++) @@ -1251,16 +1220,16 @@ handle_exception (int sigval) for (thread_id = 0; thread_id < number_of_tasks; thread_id++) { nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = lowhex (0); - remcomOutBuffer[pos++] = lowhex (thread_id); + remcomOutBuffer[pos] = hex_asc_lo(0); + remcomOutBuffer[pos++] = hex_asc_lo(thread_id); } } else { /* Store the thread identifier of the boot task. */ nextpos = pos + HEXCHARS_IN_THREAD_ID - 1; for (; pos < nextpos; pos ++) - remcomOutBuffer[pos] = lowhex (0); - remcomOutBuffer[pos++] = lowhex (current_thread_c); + remcomOutBuffer[pos] = hex_asc_lo(0); + remcomOutBuffer[pos++] = hex_asc_lo(current_thread_c); } remcomOutBuffer[pos] = '\0'; break; diff --git a/arch/cris/arch-v32/kernel/kgdb.c b/arch/cris/arch-v32/kernel/kgdb.c index 4e2e2e271ef..8bd5a5bc0dc 100644 --- a/arch/cris/arch-v32/kernel/kgdb.c +++ b/arch/cris/arch-v32/kernel/kgdb.c @@ -398,14 +398,6 @@ void putDebugChar(int val) } #endif -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static char highhex(int x); - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static char lowhex(int x); - /* Returns the integer equivalent of a hexadecimal character. */ static int hex(char ch); @@ -464,9 +456,6 @@ void breakpoint(void); /* Run-length encoding maximum length. Send 64 at most. */ #define RUNLENMAX 64 -/* Definition of all valid hexadecimal characters */ -static const char hexchars[] = "0123456789abcdef"; - /* The inbound/outbound buffers used in packet I/O */ static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; @@ -550,8 +539,8 @@ gdb_cris_strtol(const char *s, char **endptr, int base) char *sd; int x = 0; - for (s1 = (char*)s; (sd = gdb_cris_memchr(hexchars, *s1, base)) != NULL; ++s1) - x = x * base + (sd - hexchars); + for (s1 = (char*)s; (sd = gdb_cris_memchr(hex_asc, *s1, base)) != NULL; ++s1) + x = x * base + (sd - hex_asc); if (endptr) { /* Unconverted suffix is stored in endptr unless endptr is NULL. */ @@ -655,22 +644,6 @@ read_register(char regno, unsigned int *valptr) } /********************************** Packet I/O ******************************/ -/* Returns the character equivalent of a nibble, bit 7, 6, 5, and 4 of a byte, - represented by int x. */ -static inline char -highhex(int x) -{ - return hexchars[(x >> 4) & 0xf]; -} - -/* Returns the character equivalent of a nibble, bit 3, 2, 1, and 0 of a byte, - represented by int x. */ -static inline char -lowhex(int x) -{ - return hexchars[x & 0xf]; -} - /* Returns the integer equivalent of a hexadecimal character. */ static int hex(char ch) @@ -704,8 +677,7 @@ mem2hex(char *buf, unsigned char *mem, int count) /* Valid mem address. */ for (i = 0; i < count; i++) { ch = *mem++; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } } /* Terminate properly. */ @@ -723,8 +695,7 @@ mem2hex_nbo(char *buf, unsigned char *mem, int count) mem += count - 1; for (i = 0; i < count; i++) { ch = *mem--; - *buf++ = highhex (ch); - *buf++ = lowhex (ch); + buf = pack_hex_byte(buf, ch); } /* Terminate properly. */ @@ -862,8 +833,8 @@ putpacket(char *buffer) } } putDebugChar('#'); - putDebugChar(highhex (checksum)); - putDebugChar(lowhex (checksum)); + putDebugChar(hex_asc_hi(checksum)); + putDebugChar(hex_asc_lo(checksum)); } while(kgdb_started && (getDebugChar() != '+')); } @@ -909,8 +880,7 @@ stub_is_stopped(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = highhex(sigval); - *ptr++ = lowhex(sigval); + ptr = pack_hex_byte(ptr, sigval); if (((reg.exs & 0xff00) >> 8) == 0xc) { @@ -1018,30 +988,26 @@ stub_is_stopped(int sigval) } /* Only send PC, frame and stack pointer. */ read_register(PC, ®_cont); - *ptr++ = highhex(PC); - *ptr++ = lowhex(PC); + ptr = pack_hex_byte(PC); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[PC]); *ptr++ = ';'; read_register(R8, ®_cont); - *ptr++ = highhex(R8); - *ptr++ = lowhex(R8); + ptr = pack_hex_byte(R8); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[R8]); *ptr++ = ';'; read_register(SP, ®_cont); - *ptr++ = highhex(SP); - *ptr++ = lowhex(SP); + ptr = pack_hex_byte(SP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[SP]); *ptr++ = ';'; /* Send ERP as well; this will save us an entire register fetch in some cases. */ read_register(ERP, ®_cont); - *ptr++ = highhex(ERP); - *ptr++ = lowhex(ERP); + ptr = pack_hex_byte(ERP); *ptr++ = ':'; ptr = mem2hex(ptr, (unsigned char *)®_cont, register_size[ERP]); *ptr++ = ';'; @@ -1533,8 +1499,8 @@ handle_exception(int sigval) Success: SAA, where AA is the signal number. Failure: void. */ output_buffer[0] = 'S'; - output_buffer[1] = highhex(sigval); - output_buffer[2] = lowhex(sigval); + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; diff --git a/arch/cris/mm/init.c b/arch/cris/mm/init.c index 5b06ffa15e3..2fdd212eb25 100644 --- a/arch/cris/mm/init.c +++ b/arch/cris/mm/init.c @@ -19,36 +19,6 @@ unsigned long empty_zero_page; extern char _stext, _edata, _etext; /* From linkerscript */ extern char __init_begin, __init_end; -void -show_mem(void) -{ - int i,free = 0,total = 0,cached = 0, reserved = 0, nonshared = 0; - int shared = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else if (page_count(mem_map+i) == 1) - nonshared++; - else - shared += page_count(mem_map+i) - 1; - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages nonshared\n",nonshared); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - void __init mem_init(void) { diff --git a/arch/frv/kernel/gdb-stub.c b/arch/frv/kernel/gdb-stub.c index 48a0393e7ce..7ca8a6b19ac 100644 --- a/arch/frv/kernel/gdb-stub.c +++ b/arch/frv/kernel/gdb-stub.c @@ -182,8 +182,6 @@ extern volatile u32 __attribute__((section(".bss"))) gdbstub_trace_through_excep static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; -static const char hexchars[] = "0123456789abcdef"; - static const char *regnames[] = { "PSR ", "ISR ", "CCR ", "CCCR", "LR ", "LCR ", "PC ", "_stt", @@ -383,8 +381,8 @@ static int gdbstub_send_packet(char *buffer) } gdbstub_tx_char('#'); - gdbstub_tx_char(hexchars[checksum >> 4]); - gdbstub_tx_char(hexchars[checksum & 0xf]); + gdbstub_tx_char(hex_asc_hi(checksum)); + gdbstub_tx_char(hex_asc_lo(checksum)); } while (gdbstub_rx_char(&ch,0), #ifdef GDBSTUB_DEBUG_PROTOCOL @@ -674,8 +672,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if ((uint32_t)mem&1 && count>=1) { if (!gdbstub_read_byte(mem,ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); mem++; count--; } @@ -683,10 +680,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if ((uint32_t)mem&3 && count>=2) { if (!gdbstub_read_word(mem,(uint16_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -694,14 +689,10 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa while (count>=4) { if (!gdbstub_read_dword(mem,(uint32_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; - *buf++ = hexchars[ch[2] >> 4]; - *buf++ = hexchars[ch[2] & 0xf]; - *buf++ = hexchars[ch[3] >> 4]; - *buf++ = hexchars[ch[3] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); + buf = pack_hex_byte(buf, ch[2]); + buf = pack_hex_byte(buf, ch[3]); mem += 4; count -= 4; } @@ -709,10 +700,8 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if (count>=2) { if (!gdbstub_read_word(mem,(uint16_t *)ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -720,8 +709,7 @@ static unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fa if (count>=1) { if (!gdbstub_read_byte(mem,ch)) return NULL; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); } *buf = 0; @@ -1471,22 +1459,22 @@ void gdbstub(int sigval) *ptr++ = 'O'; ptr = mem2hex(title, ptr, sizeof(title) - 1,0); - hx = hexchars[(brr & 0xf0000000) >> 28]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0f000000) >> 24]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x00f00000) >> 20]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x000f0000) >> 16]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0000f000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x00000f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x000000f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(brr & 0x0000000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(brr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(brr); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(brr); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1500,12 +1488,10 @@ void gdbstub(int sigval) /* Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; + ptr = pack_hex_byte(ptr, sigval); /* Send Error PC */ - *ptr++ = hexchars[GDB_REG_PC >> 4]; - *ptr++ = hexchars[GDB_REG_PC & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_PC); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->pc, ptr, 4, 0); *ptr++ = ';'; @@ -1513,8 +1499,7 @@ void gdbstub(int sigval) /* * Send frame pointer */ - *ptr++ = hexchars[GDB_REG_FP >> 4]; - *ptr++ = hexchars[GDB_REG_FP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_FP); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->fp, ptr, 4, 0); *ptr++ = ';'; @@ -1522,8 +1507,7 @@ void gdbstub(int sigval) /* * Send stack pointer */ - *ptr++ = hexchars[GDB_REG_SP >> 4]; - *ptr++ = hexchars[GDB_REG_SP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REG_SP); *ptr++ = ':'; ptr = mem2hex(&__debug_frame->sp, ptr, 4, 0); *ptr++ = ';'; @@ -1548,8 +1532,8 @@ void gdbstub(int sigval) /* request repeat of last signal number */ case '?': output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; @@ -2059,8 +2043,8 @@ void gdbstub_exit(int status) } gdbstub_tx_char('#'); - gdbstub_tx_char(hexchars[checksum >> 4]); - gdbstub_tx_char(hexchars[checksum & 0xf]); + gdbstub_tx_char(hex_asc_hi(checksum)); + gdbstub_tx_char(hex_asc_lo(checksum)); /* make sure the output is flushed, or else RedBoot might clobber it */ gdbstub_tx_char('-'); diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index 9af7740f32f..1b851db3418 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -63,37 +63,6 @@ EXPORT_SYMBOL(empty_zero_page); /*****************************************************************************/ /* - * - */ -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - struct page *page = &mem_map[i]; - - total++; - if (PageReserved(page)) - reserved++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - -} /* end show_mem() */ - -/*****************************************************************************/ -/* * paging_init() continues the virtual memory environment setup which * was begun by the code in arch/head.S. * The parameters are pointers to where to stick the starting and ending diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index e4f4199f97a..a1d228f5e4e 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -64,33 +64,6 @@ unsigned long empty_zero_page; extern unsigned long rom_length; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - - printk("\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map+i) - 1; - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c index 1c44ec2a1d5..88b6e6f3fd8 100644 --- a/arch/ia64/hp/common/hwsw_iommu.c +++ b/arch/ia64/hp/common/hwsw_iommu.c @@ -186,9 +186,10 @@ hwsw_dma_supported (struct device *dev, u64 mask) } int -hwsw_dma_mapping_error (dma_addr_t dma_addr) +hwsw_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { - return hwiommu_dma_mapping_error (dma_addr) || swiotlb_dma_mapping_error(dma_addr); + return hwiommu_dma_mapping_error(dev, dma_addr) || + swiotlb_dma_mapping_error(dev, dma_addr); } EXPORT_SYMBOL(hwsw_dma_mapping_error); diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c index 34421aed1e2..4956be40d7b 100644 --- a/arch/ia64/hp/common/sba_iommu.c +++ b/arch/ia64/hp/common/sba_iommu.c @@ -2147,7 +2147,7 @@ sba_dma_supported (struct device *dev, u64 mask) } int -sba_dma_mapping_error (dma_addr_t dma_addr) +sba_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 19d4493c619..fc8f3509df2 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -2626,7 +2626,7 @@ pfm_task_incompatible(pfm_context_t *ctx, struct task_struct *task) /* * make sure the task is off any CPU */ - wait_task_inactive(task); + wait_task_inactive(task, 0); /* more to come... */ @@ -4774,7 +4774,7 @@ recheck: UNPROTECT_CTX(ctx, flags); - wait_task_inactive(task); + wait_task_inactive(task, 0); PROTECT_CTX(ctx, flags); diff --git a/arch/ia64/kvm/kvm-ia64.c b/arch/ia64/kvm/kvm-ia64.c index 2672f4d278a..7a37d06376b 100644 --- a/arch/ia64/kvm/kvm-ia64.c +++ b/arch/ia64/kvm/kvm-ia64.c @@ -125,9 +125,9 @@ void kvm_arch_hardware_enable(void *garbage) PAGE_KERNEL)); local_irq_save(saved_psr); slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT); + local_irq_restore(saved_psr); if (slot < 0) return; - local_irq_restore(saved_psr); spin_lock(&vp_lock); status = ia64_pal_vp_init_env(kvm_vsa_base ? @@ -160,9 +160,9 @@ void kvm_arch_hardware_disable(void *garbage) local_irq_save(saved_psr); slot = ia64_itr_entry(0x3, KVM_VMM_BASE, pte, KVM_VMM_SHIFT); + local_irq_restore(saved_psr); if (slot < 0) return; - local_irq_restore(saved_psr); status = ia64_pal_vp_exit_env(host_iva); if (status) @@ -1253,6 +1253,7 @@ static int vti_vcpu_setup(struct kvm_vcpu *vcpu, int id) uninit: kvm_vcpu_uninit(vcpu); fail: + local_irq_restore(psr); return r; } diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c index 52175af299a..53ebb648449 100644 --- a/arch/ia64/sn/pci/pci_dma.c +++ b/arch/ia64/sn/pci/pci_dma.c @@ -350,7 +350,7 @@ void sn_dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, } EXPORT_SYMBOL(sn_dma_sync_sg_for_device); -int sn_dma_mapping_error(dma_addr_t dma_addr) +int sn_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/m32r/mm/init.c b/arch/m32r/mm/init.c index 2554eb59cfe..24d429f9358 100644 --- a/arch/m32r/mm/init.c +++ b/arch/m32r/mm/init.c @@ -36,42 +36,6 @@ pgd_t swapper_pg_dir[1024]; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -void show_mem(void) -{ - int total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n",nr_swap_pages<<(PAGE_SHIFT-10)); - for_each_online_pgdat(pgdat) { - unsigned long flags; - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n",highmem); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - /* * Cache of MMU context last used. */ diff --git a/arch/m68k/mm/init.c b/arch/m68k/mm/init.c index 79f5f94d480..81bb08ceec1 100644 --- a/arch/m68k/mm/init.c +++ b/arch/m68k/mm/init.c @@ -69,36 +69,6 @@ void __init m68k_setup_node(int node) void *empty_zero_page; EXPORT_SYMBOL(empty_zero_page); -void show_mem(void) -{ - pg_data_t *pgdat; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - int i; - - printk("\nMem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat->node_mem_map + i; - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - } - printk("%d pages of RAM\n",total); - printk("%d free pages\n",free); - printk("%d reserved pages\n",reserved); - printk("%d pages shared\n",shared); - printk("%d pages swap cached\n",cached); -} - extern void init_pointer_table(unsigned long ptable); /* References to section boundaries */ diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c index 22e2a0d02b8..3bf249c53e4 100644 --- a/arch/m68knommu/mm/init.c +++ b/arch/m68knommu/mm/init.c @@ -62,33 +62,6 @@ static unsigned long empty_bad_page; unsigned long empty_zero_page; -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - int cached = 0; - - printk(KERN_INFO "\nMem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map+i)) - free++; - else - shared += page_count(mem_map+i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n",total); - printk(KERN_INFO "%d free pages\n",free); - printk(KERN_INFO "%d reserved pages\n",reserved); - printk(KERN_INFO "%d pages shared\n",shared); - printk(KERN_INFO "%d pages swap cached\n",cached); -} - extern unsigned long memory_start; extern unsigned long memory_end; diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 48731020ca0..44e8dd8106b 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,8 +3,7 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - init.o pgtable.o tlbex.o tlbex-fault.o \ - uasm.o page.o + init.o tlbex.o tlbex-fault.o uasm.o page.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c index ae39dd88b9a..891312f8e5a 100644 --- a/arch/mips/mm/dma-default.c +++ b/arch/mips/mm/dma-default.c @@ -348,7 +348,7 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nele EXPORT_SYMBOL(dma_sync_sg_for_device); -int dma_mapping_error(dma_addr_t dma_addr) +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) { return 0; } diff --git a/arch/mips/mm/pgtable.c b/arch/mips/mm/pgtable.c deleted file mode 100644 index 7dfa579ab24..00000000000 --- a/arch/mips/mm/pgtable.c +++ /dev/null @@ -1,36 +0,0 @@ -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/swap.h> - -void show_mem(void) -{ -#ifndef CONFIG_NEED_MULTIPLE_NODES /* XXX(hch): later.. */ - int pfn, total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - - printk("Mem-info:\n"); - show_free_areas(); - pfn = max_mapnr; - while (pfn-- > 0) { - if (!pfn_valid(pfn)) - continue; - page = pfn_to_page(pfn); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - printk("%d pages of RAM\n", total); - printk("%d pages of HIGHMEM\n", highmem); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); -#endif -} diff --git a/arch/mn10300/kernel/gdb-stub.c b/arch/mn10300/kernel/gdb-stub.c index 21891c71d54..54be6afb555 100644 --- a/arch/mn10300/kernel/gdb-stub.c +++ b/arch/mn10300/kernel/gdb-stub.c @@ -163,8 +163,6 @@ static char input_buffer[BUFMAX]; static char output_buffer[BUFMAX]; static char trans_buffer[BUFMAX]; -static const char hexchars[] = "0123456789abcdef"; - struct gdbstub_bkpt { u8 *addr; /* address of breakpoint */ u8 len; /* size of breakpoint */ @@ -363,8 +361,8 @@ static int putpacket(char *buffer) } gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hexchars[checksum >> 4]); - gdbstub_io_tx_char(hexchars[checksum & 0xf]); + gdbstub_io_tx_char(hex_asc_hi(checksum)); + gdbstub_io_tx_char(hex_asc_lo(checksum)); } while (gdbstub_io_rx_char(&ch, 0), ch == '-' && (gdbstub_io("### GDB Rx NAK\n"), 0), @@ -822,8 +820,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if ((u32) mem & 1 && count >= 1) { if (gdbstub_read_byte(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); mem++; count--; } @@ -831,10 +828,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if ((u32) mem & 3 && count >= 2) { if (gdbstub_read_word(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -842,14 +837,10 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) while (count >= 4) { if (gdbstub_read_dword(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; - *buf++ = hexchars[ch[2] >> 4]; - *buf++ = hexchars[ch[2] & 0xf]; - *buf++ = hexchars[ch[3] >> 4]; - *buf++ = hexchars[ch[3] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); + buf = pack_hex_byte(buf, ch[2]); + buf = pack_hex_byte(buf, ch[3]); mem += 4; count -= 4; } @@ -857,10 +848,8 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if (count >= 2) { if (gdbstub_read_word(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; - *buf++ = hexchars[ch[1] >> 4]; - *buf++ = hexchars[ch[1] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); + buf = pack_hex_byte(buf, ch[1]); mem += 2; count -= 2; } @@ -868,8 +857,7 @@ unsigned char *mem2hex(const void *_mem, char *buf, int count, int may_fault) if (count >= 1) { if (gdbstub_read_byte(mem, ch) != 0) return 0; - *buf++ = hexchars[ch[0] >> 4]; - *buf++ = hexchars[ch[0] & 0xf]; + buf = pack_hex_byte(buf, ch[0]); } *buf = 0; @@ -1304,14 +1292,14 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) *ptr++ = 'O'; ptr = mem2hex(title, ptr, sizeof(title) - 1, 0); - hx = hexchars[(excep & 0xf000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x0f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x00f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(excep & 0x000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(excep >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(excep >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(excep); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(excep); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1322,22 +1310,22 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) *ptr++ = 'O'; ptr = mem2hex(tbcberr, ptr, sizeof(tbcberr) - 1, 0); - hx = hexchars[(bcberr & 0xf0000000) >> 28]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0f000000) >> 24]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x00f00000) >> 20]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x000f0000) >> 16]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0000f000) >> 12]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x00000f00) >> 8]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x000000f0) >> 4]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; - hx = hexchars[(bcberr & 0x0000000f)]; - *ptr++ = hexchars[hx >> 4]; *ptr++ = hexchars[hx & 0xf]; + hx = hex_asc_hi(bcberr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 24); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 16); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr >> 8); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_hi(bcberr); + ptr = pack_hex_byte(ptr, hx); + hx = hex_asc_lo(bcberr); + ptr = pack_hex_byte(ptr, hx); ptr = mem2hex(crlf, ptr, sizeof(crlf) - 1, 0); *ptr = 0; @@ -1353,14 +1341,12 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) * Send trap type (converted to signal) */ *ptr++ = 'T'; - *ptr++ = hexchars[sigval >> 4]; - *ptr++ = hexchars[sigval & 0xf]; + ptr = pack_hex_byte(ptr, sigval); /* * Send Error PC */ - *ptr++ = hexchars[GDB_REGID_PC >> 4]; - *ptr++ = hexchars[GDB_REGID_PC & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_PC); *ptr++ = ':'; ptr = mem2hex(®s->pc, ptr, 4, 0); *ptr++ = ';'; @@ -1368,8 +1354,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) /* * Send frame pointer */ - *ptr++ = hexchars[GDB_REGID_FP >> 4]; - *ptr++ = hexchars[GDB_REGID_FP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_FP); *ptr++ = ':'; ptr = mem2hex(®s->a3, ptr, 4, 0); *ptr++ = ';'; @@ -1378,8 +1363,7 @@ static int gdbstub(struct pt_regs *regs, enum exception_code excep) * Send stack pointer */ ssp = (unsigned long) (regs + 1); - *ptr++ = hexchars[GDB_REGID_SP >> 4]; - *ptr++ = hexchars[GDB_REGID_SP & 0xf]; + ptr = pack_hex_byte(ptr, GDB_REGID_SP); *ptr++ = ':'; ptr = mem2hex(&ssp, ptr, 4, 0); *ptr++ = ';'; @@ -1399,8 +1383,8 @@ packet_waiting: /* request repeat of last signal number */ case '?': output_buffer[0] = 'S'; - output_buffer[1] = hexchars[sigval >> 4]; - output_buffer[2] = hexchars[sigval & 0xf]; + output_buffer[1] = hex_asc_hi(sigval); + output_buffer[2] = hex_asc_lo(sigval); output_buffer[3] = 0; break; @@ -1838,8 +1822,8 @@ void gdbstub_exit(int status) gdbstub_busy = 1; output_buffer[0] = 'W'; - output_buffer[1] = hexchars[(status >> 4) & 0x0F]; - output_buffer[2] = hexchars[status & 0x0F]; + output_buffer[1] = hex_asc_hi(status); + output_buffer[2] = hex_asc_lo(status); output_buffer[3] = 0; gdbstub_io_tx_char('$'); @@ -1853,8 +1837,8 @@ void gdbstub_exit(int status) } gdbstub_io_tx_char('#'); - gdbstub_io_tx_char(hexchars[checksum >> 4]); - gdbstub_io_tx_char(hexchars[checksum & 0xf]); + gdbstub_io_tx_char(hex_asc_hi(checksum)); + gdbstub_io_tx_char(hex_asc_lo(checksum)); /* make sure the output is flushed, or else RedBoot might clobber it */ gdbstub_io_tx_flush(); diff --git a/arch/mn10300/mm/pgtable.c b/arch/mn10300/mm/pgtable.c index a477038752b..baffc581e03 100644 --- a/arch/mn10300/mm/pgtable.c +++ b/arch/mn10300/mm/pgtable.c @@ -27,33 +27,6 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -void show_mem(void) -{ - unsigned long i; - int free = 0, total = 0, reserved = 0, shared = 0; - - int cached = 0; - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map + i)) - reserved++; - else if (PageSwapCache(mem_map + i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d free pages\n", free); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* * Associate a large virtual page frame with a given physical page frame * and protection flags for that frame. pfn is for the base of the page, diff --git a/arch/parisc/hpux/sys_hpux.c b/arch/parisc/hpux/sys_hpux.c index be255ebb609..18072e03a01 100644 --- a/arch/parisc/hpux/sys_hpux.c +++ b/arch/parisc/hpux/sys_hpux.c @@ -210,19 +210,19 @@ static int vfs_statfs_hpux(struct dentry *dentry, struct hpux_statfs *buf) } /* hpux statfs */ -asmlinkage long hpux_statfs(const char __user *path, +asmlinkage long hpux_statfs(const char __user *pathname, struct hpux_statfs __user *buf) { - struct nameidata nd; + struct path path; int error; - error = user_path_walk(path, &nd); + error = user_path(pathname, &path); if (!error) { struct hpux_statfs tmp; - error = vfs_statfs_hpux(nd.path.dentry, &tmp); + error = vfs_statfs_hpux(path.dentry, &tmp); if (!error && copy_to_user(buf, &tmp, sizeof(tmp))) error = -EFAULT; - path_put(&nd.path); + path_put(&path); } return error; } diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index 29a0e039d43..aab76887a84 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -48,7 +48,7 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { if (ppc_md.machine_kexec) ppc_md.machine_kexec(image); diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 09ded5c424a..149cb112cd1 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -286,7 +286,7 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf, } /* constructor for flash_block_cache */ -void rtas_block_ctor(struct kmem_cache *cache, void *ptr) +void rtas_block_ctor(void *ptr) { memset(ptr, 0, RTAS_BLK_SIZE); } diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 75dff7cfa81..5a5602da509 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -177,7 +177,8 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, vcpu->arch.msr & MSR_PR); } -void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) +void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, gva_t eaddr, + gva_t eend, u32 asid) { unsigned int pid = asid & 0xff; int i; @@ -191,7 +192,7 @@ void kvmppc_mmu_invalidate(struct kvm_vcpu *vcpu, u64 eaddr, u64 asid) if (!get_tlb_v(stlbe)) continue; - if (eaddr < get_tlb_eaddr(stlbe)) + if (eend < get_tlb_eaddr(stlbe)) continue; if (eaddr > get_tlb_end(stlbe)) diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index 00009746128..8c605d0a548 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -137,7 +137,7 @@ static int kvmppc_emul_tlbwe(struct kvm_vcpu *vcpu, u32 inst) if (tlbe->word0 & PPC44x_TLB_VALID) { eaddr = get_tlb_eaddr(tlbe); asid = (tlbe->word0 & PPC44x_TLB_TS) | tlbe->tid; - kvmppc_mmu_invalidate(vcpu, eaddr, asid); + kvmppc_mmu_invalidate(vcpu, eaddr, get_tlb_end(tlbe), asid); } switch (ws) { diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index fb42c4dd321..ed0aab0208a 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -113,7 +113,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr, static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp, unsigned long address, unsigned int psize) { - pte_t *new = kmem_cache_alloc(huge_pgtable_cache(psize), + pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize), GFP_KERNEL|__GFP_REPEAT); if (! new) @@ -730,11 +730,6 @@ static int __init hugepage_setup_sz(char *str) } __setup("hugepagesz=", hugepage_setup_sz); -static void zero_ctor(struct kmem_cache *cache, void *addr) -{ - memset(addr, 0, kmem_cache_size(cache)); -} - static int __init hugetlbpage_init(void) { unsigned int psize; @@ -756,7 +751,7 @@ static int __init hugetlbpage_init(void) HUGEPTE_TABLE_SIZE(psize), HUGEPTE_TABLE_SIZE(psize), 0, - zero_ctor); + NULL); if (!huge_pgtable_cache(psize)) panic("hugetlbpage_init(): could not create %s"\ "\n", HUGEPTE_CACHE_NAME(psize)); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index a41bc5aa204..4f7df85129d 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -136,9 +136,14 @@ static int __init setup_kcore(void) module_init(setup_kcore); #endif -static void zero_ctor(struct kmem_cache *cache, void *addr) +static void pgd_ctor(void *addr) { - memset(addr, 0, kmem_cache_size(cache)); + memset(addr, 0, PGD_TABLE_SIZE); +} + +static void pmd_ctor(void *addr) +{ + memset(addr, 0, PMD_TABLE_SIZE); } static const unsigned int pgtable_cache_size[2] = { @@ -163,19 +168,8 @@ struct kmem_cache *pgtable_cache[ARRAY_SIZE(pgtable_cache_size)]; void pgtable_cache_init(void) { - int i; - - for (i = 0; i < ARRAY_SIZE(pgtable_cache_size); i++) { - int size = pgtable_cache_size[i]; - const char *name = pgtable_cache_name[i]; - - pr_debug("Allocating page table cache %s (#%d) " - "for size: %08x...\n", name, i, size); - pgtable_cache[i] = kmem_cache_create(name, - size, size, - SLAB_PANIC, - zero_ctor); - } + pgtable_cache[0] = kmem_cache_create(pgtable_cache_name[0], PGD_TABLE_SIZE, PGD_TABLE_SIZE, SLAB_PANIC, pgd_ctor); + pgtable_cache[1] = kmem_cache_create(pgtable_cache_name[1], PMD_TABLE_SIZE, PMD_TABLE_SIZE, SLAB_PANIC, pmd_ctor); } #ifdef CONFIG_SPARSEMEM_VMEMMAP diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 1ca2235f096..702691cb9e8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -186,45 +186,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } EXPORT_SYMBOL_GPL(walk_memory_resource); -void show_mem(void) -{ - unsigned long total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - unsigned long highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - - printk("Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - unsigned long flags; - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%ld pages of RAM\n", total); -#ifdef CONFIG_HIGHMEM - printk("%ld pages of HIGHMEM\n", highmem); -#endif - printk("%ld reserved pages\n", reserved); - printk("%ld pages shared\n", shared); - printk("%ld pages swap cached\n", cached); -} - /* * Initialize the bootmem system and give it all the memory we * have available. If we are using highmem, we only put the diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index 0e04f8fb152..3e7e0f1568e 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -281,7 +281,7 @@ static int __init scc_pciex_iowa_init(struct iowa_bus *bus, void *data) dummy_page_da = dma_map_single(bus->phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(bus->phb->parent, dummy_page_da)) { pr_err("PCIEX:Map dummy page failed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/cell/spider-pci.c b/arch/powerpc/platforms/cell/spider-pci.c index 418b605ac35..5122ec14527 100644 --- a/arch/powerpc/platforms/cell/spider-pci.c +++ b/arch/powerpc/platforms/cell/spider-pci.c @@ -111,7 +111,7 @@ static int __init spiderpci_pci_setup_chip(struct pci_controller *phb, dummy_page_da = dma_map_single(phb->parent, dummy_page_va, PAGE_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(dummy_page_da)) { + if (dma_mapping_error(phb->parent, dummy_page_da)) { pr_err("SPIDER-IOWA:Map dummy page filed.\n"); kfree(dummy_page_va); return -1; diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index 7123472801d..690ca7b0dcf 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -78,7 +78,7 @@ spufs_destroy_inode(struct inode *inode) } static void -spufs_init_once(struct kmem_cache *cachep, void *p) +spufs_init_once(void *p) { struct spufs_inode_info *ei = p; diff --git a/arch/powerpc/platforms/iseries/mf.c b/arch/powerpc/platforms/iseries/mf.c index 1dc7295746d..731d7b15774 100644 --- a/arch/powerpc/platforms/iseries/mf.c +++ b/arch/powerpc/platforms/iseries/mf.c @@ -871,7 +871,7 @@ static int proc_mf_dump_cmdline(char *page, char **start, off_t off, count = 256 - off; dma_addr = iseries_hv_map(page, off + count, DMA_FROM_DEVICE); - if (dma_mapping_error(dma_addr)) + if (dma_mapping_error(NULL, dma_addr)) return -ENOMEM; memset(page, 0, off + count); memset(&vsp_cmd, 0, sizeof(vsp_cmd)); diff --git a/arch/s390/kvm/gaccess.h b/arch/s390/kvm/gaccess.h index 4e0633c413f..ed60f3a74a8 100644 --- a/arch/s390/kvm/gaccess.h +++ b/arch/s390/kvm/gaccess.h @@ -18,11 +18,11 @@ #include <asm/uaccess.h> static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu, - u64 guestaddr) + unsigned long guestaddr) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestaddr < 2 * PAGE_SIZE) guestaddr += prefix; @@ -37,7 +37,7 @@ static inline void __user *__guestaddr_to_user(struct kvm_vcpu *vcpu, return (void __user *) guestaddr; } -static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr, u64 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -47,10 +47,10 @@ static inline int get_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, if (IS_ERR((void __force *) uptr)) return PTR_ERR((void __force *) uptr); - return get_user(*result, (u64 __user *) uptr); + return get_user(*result, (unsigned long __user *) uptr); } -static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr, u32 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -63,7 +63,7 @@ static inline int get_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u32 __user *) uptr); } -static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr, u16 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -76,7 +76,7 @@ static inline int get_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u16 __user *) uptr); } -static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int get_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr, u8 *result) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -87,7 +87,7 @@ static inline int get_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, return get_user(*result, (u8 __user *) uptr); } -static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u64(struct kvm_vcpu *vcpu, unsigned long guestaddr, u64 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -100,7 +100,7 @@ static inline int put_guest_u64(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u64 __user *) uptr); } -static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u32(struct kvm_vcpu *vcpu, unsigned long guestaddr, u32 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -113,7 +113,7 @@ static inline int put_guest_u32(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u32 __user *) uptr); } -static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u16(struct kvm_vcpu *vcpu, unsigned long guestaddr, u16 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -126,7 +126,7 @@ static inline int put_guest_u16(struct kvm_vcpu *vcpu, u64 guestaddr, return put_user(value, (u16 __user *) uptr); } -static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, +static inline int put_guest_u8(struct kvm_vcpu *vcpu, unsigned long guestaddr, u8 value) { void __user *uptr = __guestaddr_to_user(vcpu, guestaddr); @@ -138,7 +138,8 @@ static inline int put_guest_u8(struct kvm_vcpu *vcpu, u64 guestaddr, } -static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, + unsigned long guestdest, const void *from, unsigned long n) { int rc; @@ -153,12 +154,12 @@ static inline int __copy_to_guest_slow(struct kvm_vcpu *vcpu, u64 guestdest, return 0; } -static inline int copy_to_guest(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int copy_to_guest(struct kvm_vcpu *vcpu, unsigned long guestdest, const void *from, unsigned long n) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if ((guestdest < 2 * PAGE_SIZE) && (guestdest + n > 2 * PAGE_SIZE)) goto slowpath; @@ -189,7 +190,8 @@ slowpath: } static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, + unsigned long n) { int rc; unsigned long i; @@ -204,11 +206,11 @@ static inline int __copy_from_guest_slow(struct kvm_vcpu *vcpu, void *to, } static inline int copy_from_guest(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, unsigned long n) { - u64 prefix = vcpu->arch.sie_block->prefix; - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long prefix = vcpu->arch.sie_block->prefix; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if ((guestsrc < 2 * PAGE_SIZE) && (guestsrc + n > 2 * PAGE_SIZE)) goto slowpath; @@ -238,11 +240,12 @@ slowpath: return __copy_from_guest_slow(vcpu, to, guestsrc, n); } -static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest, +static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, + unsigned long guestdest, const void *from, unsigned long n) { - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestdest + n > memsize) return -EFAULT; @@ -256,10 +259,11 @@ static inline int copy_to_guest_absolute(struct kvm_vcpu *vcpu, u64 guestdest, } static inline int copy_from_guest_absolute(struct kvm_vcpu *vcpu, void *to, - u64 guestsrc, unsigned long n) + unsigned long guestsrc, + unsigned long n) { - u64 origin = vcpu->kvm->arch.guest_origin; - u64 memsize = vcpu->kvm->arch.guest_memsize; + unsigned long origin = vcpu->kvm->arch.guest_origin; + unsigned long memsize = vcpu->kvm->arch.guest_memsize; if (guestsrc + n > memsize) return -EFAULT; diff --git a/arch/s390/kvm/intercept.c b/arch/s390/kvm/intercept.c index 47a0b642174..61236102203 100644 --- a/arch/s390/kvm/intercept.c +++ b/arch/s390/kvm/intercept.c @@ -20,7 +20,7 @@ #include "kvm-s390.h" #include "gaccess.h" -static int handle_lctg(struct kvm_vcpu *vcpu) +static int handle_lctlg(struct kvm_vcpu *vcpu) { int reg1 = (vcpu->arch.sie_block->ipa & 0x00f0) >> 4; int reg3 = vcpu->arch.sie_block->ipa & 0x000f; @@ -30,7 +30,7 @@ static int handle_lctg(struct kvm_vcpu *vcpu) u64 useraddr; int reg, rc; - vcpu->stat.instruction_lctg++; + vcpu->stat.instruction_lctlg++; if ((vcpu->arch.sie_block->ipb & 0xff) != 0x2f) return -ENOTSUPP; @@ -38,9 +38,12 @@ static int handle_lctg(struct kvm_vcpu *vcpu) if (base2) useraddr += vcpu->arch.guest_gprs[base2]; + if (useraddr & 7) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + reg = reg1; - VCPU_EVENT(vcpu, 5, "lctg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, + VCPU_EVENT(vcpu, 5, "lctlg r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, disp2); do { @@ -74,6 +77,9 @@ static int handle_lctl(struct kvm_vcpu *vcpu) if (base2) useraddr += vcpu->arch.guest_gprs[base2]; + if (useraddr & 3) + return kvm_s390_inject_program_int(vcpu, PGM_SPECIFICATION); + VCPU_EVENT(vcpu, 5, "lctl r1:%x, r3:%x,b2:%x,d2:%x", reg1, reg3, base2, disp2); @@ -99,7 +105,7 @@ static intercept_handler_t instruction_handlers[256] = { [0xae] = kvm_s390_handle_sigp, [0xb2] = kvm_s390_handle_priv, [0xb7] = handle_lctl, - [0xeb] = handle_lctg, + [0xeb] = handle_lctlg, }; static int handle_noop(struct kvm_vcpu *vcpu) diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index 11230b0db95..2960702b482 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -13,6 +13,7 @@ #include <asm/lowcore.h> #include <asm/uaccess.h> #include <linux/kvm_host.h> +#include <linux/signal.h> #include "kvm-s390.h" #include "gaccess.h" @@ -246,15 +247,10 @@ static void __do_deliver_interrupt(struct kvm_vcpu *vcpu, default: BUG(); } - if (exception) { - VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" - " interrupt"); - kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - if (inti->type == KVM_S390_PROGRAM_INT) { - printk(KERN_WARNING "kvm: recursive program check\n"); - BUG(); - } + printk("kvm: The guest lowcore is not mapped during interrupt " + "delivery, killing userspace\n"); + do_exit(SIGKILL); } } @@ -277,14 +273,11 @@ static int __try_deliver_ckc_interrupt(struct kvm_vcpu *vcpu) __LC_EXT_NEW_PSW, sizeof(psw_t)); if (rc == -EFAULT) exception = 1; - if (exception) { - VCPU_EVENT(vcpu, 1, "%s", "program exception while delivering" \ - " ckc interrupt"); - kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); - return 0; + printk("kvm: The guest lowcore is not mapped during interrupt " + "delivery, killing userspace\n"); + do_exit(SIGKILL); } - return 1; } diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 1782cbcd282..8b00eb2ddf5 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -39,7 +39,7 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "exit_instruction", VCPU_STAT(exit_instruction) }, { "exit_program_interruption", VCPU_STAT(exit_program_interruption) }, { "exit_instr_and_program_int", VCPU_STAT(exit_instr_and_program) }, - { "instruction_lctg", VCPU_STAT(instruction_lctg) }, + { "instruction_lctlg", VCPU_STAT(instruction_lctlg) }, { "instruction_lctl", VCPU_STAT(instruction_lctl) }, { "deliver_emergency_signal", VCPU_STAT(deliver_emergency_signal) }, { "deliver_service_signal", VCPU_STAT(deliver_service_signal) }, @@ -112,7 +112,12 @@ long kvm_arch_dev_ioctl(struct file *filp, int kvm_dev_ioctl_check_extension(long ext) { - return 0; + switch (ext) { + case KVM_CAP_USER_MEMORY: + return 1; + default: + return 0; + } } /* Section: vm related */ diff --git a/arch/s390/kvm/sigp.c b/arch/s390/kvm/sigp.c index 5a556114eaa..170392687ce 100644 --- a/arch/s390/kvm/sigp.c +++ b/arch/s390/kvm/sigp.c @@ -43,7 +43,8 @@ #define SIGP_STAT_RECEIVER_CHECK 0x00000001UL -static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, u64 *reg) +static int __sigp_sense(struct kvm_vcpu *vcpu, u16 cpu_addr, + unsigned long *reg) { struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; int rc; @@ -167,7 +168,7 @@ static int __sigp_set_arch(struct kvm_vcpu *vcpu, u32 parameter) } static int __sigp_set_prefix(struct kvm_vcpu *vcpu, u16 cpu_addr, u32 address, - u64 *reg) + unsigned long *reg) { struct kvm_s390_float_interrupt *fi = &vcpu->kvm->arch.float_int; struct kvm_s390_local_interrupt *li; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 388cc742005..4993b0f594e 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -42,38 +42,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD] __attribute__((__aligned__(PAGE_SIZE))); char empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE))); -void show_mem(void) -{ - unsigned long i, total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - unsigned long flags; - struct page *page; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - page = pfn_to_page(pgdat->node_start_pfn + i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk("%ld pages of RAM\n", total); - printk("%ld reserved pages\n", reserved); - printk("%ld pages shared\n", shared); - printk("%ld pages swap cached\n", cached); -} - /* * paging_init() sets up the page tables */ diff --git a/arch/sh/kernel/machine_kexec.c b/arch/sh/kernel/machine_kexec.c index 5c17de51987..ec1eadce4aa 100644 --- a/arch/sh/kernel/machine_kexec.c +++ b/arch/sh/kernel/machine_kexec.c @@ -70,7 +70,7 @@ static void kexec_info(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list; diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index d652d375eb1..b75a7acd62f 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -25,47 +25,6 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); pgd_t swapper_pg_dir[PTRS_PER_PGD]; unsigned long cached_to_uncached = 0; -void show_mem(void) -{ - int total = 0, reserved = 0, free = 0; - int shared = 0, cached = 0, slab = 0; - pg_data_t *pgdat; - - printk("Mem-info:\n"); - show_free_areas(); - - for_each_online_pgdat(pgdat) { - unsigned long flags, i; - - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - printk("%d pages of RAM\n", total); - printk("%d free pages\n", free); - printk("%d reserved pages\n", reserved); - printk("%d slab pages\n", slab); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); - printk(KERN_INFO "Total of %ld pages in page table cache\n", - quicklist_total_size()); -} - #ifdef CONFIG_MMU static void set_pte_phys(unsigned long addr, unsigned long phys, pgprot_t prot) { diff --git a/arch/sh/mm/pmb.c b/arch/sh/mm/pmb.c index 0b0ec6e0475..46911bcbf17 100644 --- a/arch/sh/mm/pmb.c +++ b/arch/sh/mm/pmb.c @@ -293,7 +293,7 @@ void pmb_unmap(unsigned long addr) } while (pmbe); } -static void pmb_cache_ctor(struct kmem_cache *cachep, void *pmb) +static void pmb_cache_ctor(void *pmb) { struct pmb_entry *pmbe = pmb; diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 71329747395..4e821b3ecb0 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -392,51 +392,6 @@ void __kprobes flush_icache_range(unsigned long start, unsigned long end) } } -void show_mem(void) -{ - unsigned long total = 0, reserved = 0; - unsigned long shared = 0, cached = 0; - pg_data_t *pgdat; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", - nr_swap_pages << (PAGE_SHIFT-10)); - for_each_online_pgdat(pgdat) { - unsigned long i, flags; - - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; i++) { - struct page *page = pgdat_page_nr(pgdat, i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - - printk(KERN_INFO "%lu pages of RAM\n", total); - printk(KERN_INFO "%lu reserved pages\n", reserved); - printk(KERN_INFO "%lu pages shared\n", shared); - printk(KERN_INFO "%lu pages swap cached\n", cached); - - printk(KERN_INFO "%lu pages dirty\n", - global_page_state(NR_FILE_DIRTY)); - printk(KERN_INFO "%lu pages writeback\n", - global_page_state(NR_WRITEBACK)); - printk(KERN_INFO "%lu pages mapped\n", - global_page_state(NR_FILE_MAPPED)); - printk(KERN_INFO "%lu pages slab\n", - global_page_state(NR_SLAB_RECLAIMABLE) + - global_page_state(NR_SLAB_UNRECLAIMABLE)); - printk(KERN_INFO "%lu pages pagetables\n", - global_page_state(NR_PAGETABLE)); -} - void mmu_info(struct seq_file *m) { if (tlb_type == cheetah) diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c index e2274ef3155..61d7e6138ff 100644 --- a/arch/um/kernel/mem.c +++ b/arch/um/kernel/mem.c @@ -264,37 +264,6 @@ void free_initrd_mem(unsigned long start, unsigned long end) } #endif -void show_mem(void) -{ - int pfn, total = 0, reserved = 0; - int shared = 0, cached = 0; - int high_mem = 0; - struct page *page; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - printk(KERN_INFO "Free swap: %6ldkB\n", - nr_swap_pages<<(PAGE_SHIFT-10)); - pfn = max_mapnr; - while (pfn-- > 0) { - page = pfn_to_page(pfn); - total++; - if (PageHighMem(page)) - high_mem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d pages of HIGHMEM\n", high_mem); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); -} - /* Allocate and free page tables. */ pgd_t *pgd_alloc(struct mm_struct *mm) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e3cba0b4560..b6fa2877b17 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -22,8 +22,9 @@ config X86 select HAVE_IDE select HAVE_OPROFILE select HAVE_IOREMAP_PROT + select HAVE_GET_USER_PAGES_FAST select HAVE_KPROBES - select ARCH_WANT_OPTIONAL_GPIOLIB if !X86_RDC321X + select ARCH_WANT_OPTIONAL_GPIOLIB select HAVE_KRETPROBES select HAVE_DYNAMIC_FTRACE select HAVE_FTRACE @@ -332,20 +333,6 @@ config X86_BIGSMP endif -config X86_RDC321X - bool "RDC R-321x SoC" - depends on X86_32 - select M486 - select X86_REBOOTFIXUPS - select GENERIC_GPIO - select LEDS_CLASS - select LEDS_GPIO - select NEW_LEDS - help - This option is needed for RDC R-321x system-on-chip, also known - as R-8610-(G). - If you don't have one of these chips, you should say N here. - config X86_VSMP bool "Support for ScaleMP vSMP" select PARAVIRT @@ -369,6 +356,16 @@ config X86_VISWS A kernel compiled for the Visual Workstation will run on general PCs as well. See <file:Documentation/sgi-visws.txt> for details. +config X86_RDC321X + bool "RDC R-321x SoC" + depends on X86_32 + select M486 + select X86_REBOOTFIXUPS + help + This option is needed for RDC R-321x system-on-chip, also known + as R-8610-(G). + If you don't have one of these chips, you should say N here. + config SCHED_NO_NO_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" @@ -1279,6 +1276,14 @@ config CRASH_DUMP (CONFIG_RELOCATABLE=y). For more details see Documentation/kdump/kdump.txt +config KEXEC_JUMP + bool "kexec jump (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on KEXEC && HIBERNATION && X86_32 + help + Jump between original kernel and kexeced kernel and invoke + code in physical address mode via KEXEC + config PHYSICAL_START hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP) default "0x1000000" if X86_NUMAQ diff --git a/arch/x86/Makefile b/arch/x86/Makefile index 919ce21ea65..f5631da585b 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -118,11 +118,6 @@ mflags-$(CONFIG_X86_GENERICARCH):= -Iinclude/asm-x86/mach-generic fcore-$(CONFIG_X86_GENERICARCH) += arch/x86/mach-generic/ mcore-$(CONFIG_X86_GENERICARCH) := arch/x86/mach-default/ -# RDC R-321x subarch support -mflags-$(CONFIG_X86_RDC321X) := -Iinclude/asm-x86/mach-rdc321x -mcore-$(CONFIG_X86_RDC321X) := arch/x86/mach-default/ -core-$(CONFIG_X86_RDC321X) += arch/x86/mach-rdc321x/ - # default subarch .h files mflags-y += -Iinclude/asm-x86/mach-default diff --git a/arch/x86/ia32/ia32_aout.c b/arch/x86/ia32/ia32_aout.c index 58cccb6483b..a0e1dbe67dc 100644 --- a/arch/x86/ia32/ia32_aout.c +++ b/arch/x86/ia32/ia32_aout.c @@ -441,12 +441,6 @@ beyond_if: regs->r8 = regs->r9 = regs->r10 = regs->r11 = regs->r12 = regs->r13 = regs->r14 = regs->r15 = 0; set_fs(USER_DS); - if (unlikely(current->ptrace & PT_PTRACED)) { - if (current->ptrace & PT_TRACE_EXEC) - ptrace_notify((PTRACE_EVENT_EXEC << 8) | SIGTRAP); - else - send_sig(SIGTRAP, current, 0); - } return 0; } diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index c25210e6ac8..74697408576 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -667,7 +667,7 @@ static int get_device_resources(struct device *dev, _bdf = calc_devid(pcidev->bus->number, pcidev->devfn); /* device not translated by any IOMMU in the system? */ - if (_bdf >= amd_iommu_last_bdf) { + if (_bdf > amd_iommu_last_bdf) { *iommu = NULL; *domain = NULL; *bdf = 0xffff; @@ -1085,7 +1085,7 @@ void prealloc_protection_domains(void) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { devid = (dev->bus->number << 8) | dev->devfn; - if (devid >= amd_iommu_last_bdf) + if (devid > amd_iommu_last_bdf) continue; devid = amd_iommu_alias_table[devid]; if (domain_for_device(devid)) diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index c9d8ff2eb13..d9a9da597e7 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -732,7 +732,7 @@ static int __init init_exclusion_range(struct ivmd_header *m) set_device_exclusion_range(m->devid, m); break; case ACPI_IVMD_TYPE_ALL: - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) set_device_exclusion_range(i, m); break; case ACPI_IVMD_TYPE_RANGE: @@ -934,7 +934,7 @@ int __init amd_iommu_init(void) /* * let all alias entries point to itself */ - for (i = 0; i < amd_iommu_last_bdf; ++i) + for (i = 0; i <= amd_iommu_last_bdf; ++i) amd_iommu_alias_table[i] = i; /* diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index f67e93441ca..a7010c3a377 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -456,9 +456,6 @@ is386: movl $2,%ecx # set MP 1: #endif /* CONFIG_SMP */ jmp *(initial_code) -.align 4 -ENTRY(initial_code) - .long i386_start_kernel /* * We depend on ET to be correct. This checks for 287/387. @@ -601,6 +598,11 @@ ignore_int: #endif iret +.section .cpuinit.data,"wa" +.align 4 +ENTRY(initial_code) + .long i386_start_kernel + .section .text /* * Real beginning of normal "text" segment diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index 8864230d55a..9fe478d9840 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -22,6 +22,7 @@ #include <asm/cpufeature.h> #include <asm/desc.h> #include <asm/system.h> +#include <asm/cacheflush.h> #define PAGE_ALIGNED __attribute__ ((__aligned__(PAGE_SIZE))) static u32 kexec_pgd[1024] PAGE_ALIGNED; @@ -85,10 +86,12 @@ static void load_segments(void) * reboot code buffer to allow us to avoid allocations * later. * - * Currently nothing. + * Make control page executable. */ int machine_kexec_prepare(struct kimage *image) { + if (nx_enabled) + set_pages_x(image->control_code_page, 1); return 0; } @@ -98,27 +101,48 @@ int machine_kexec_prepare(struct kimage *image) */ void machine_kexec_cleanup(struct kimage *image) { + if (nx_enabled) + set_pages_nx(image->control_code_page, 1); } /* * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + asmlinkage unsigned long + (*relocate_kernel_ptr)(unsigned long indirection_page, + unsigned long control_page, + unsigned long start_address, + unsigned int has_pae, + unsigned int preserve_context); tracer_disable(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); + if (image->preserve_context) { +#ifdef CONFIG_X86_IO_APIC + /* We need to put APICs in legacy mode so that we can + * get timer interrupts in second kernel. kexec/kdump + * paths already have calls to disable_IO_APIC() in + * one form or other. kexec jump path also need + * one. + */ + disable_IO_APIC(); +#endif + } + control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE); + memcpy(control_page, relocate_kernel, PAGE_SIZE/2); + relocate_kernel_ptr = control_page; page_list[PA_CONTROL_PAGE] = __pa(control_page); - page_list[VA_CONTROL_PAGE] = (unsigned long)relocate_kernel; + page_list[VA_CONTROL_PAGE] = (unsigned long)control_page; page_list[PA_PGD] = __pa(kexec_pgd); page_list[VA_PGD] = (unsigned long)kexec_pgd; #ifdef CONFIG_X86_PAE @@ -131,6 +155,7 @@ NORET_TYPE void machine_kexec(struct kimage *image) page_list[VA_PTE_0] = (unsigned long)kexec_pte0; page_list[PA_PTE_1] = __pa(kexec_pte1); page_list[VA_PTE_1] = (unsigned long)kexec_pte1; + page_list[PA_SWAP_PAGE] = (page_to_pfn(image->swap_page) << PAGE_SHIFT); /* The segment registers are funny things, they have both a * visible and an invisible part. Whenever the visible part is @@ -149,8 +174,10 @@ NORET_TYPE void machine_kexec(struct kimage *image) set_idt(phys_to_virt(0),0); /* now call it */ - relocate_kernel((unsigned long)image->head, (unsigned long)page_list, - image->start, cpu_has_pae); + image->start = relocate_kernel_ptr((unsigned long)image->head, + (unsigned long)page_list, + image->start, cpu_has_pae, + image->preserve_context); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 9dd9262693a..c43caa3a91f 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -181,7 +181,7 @@ void machine_kexec_cleanup(struct kimage *image) * Do not allocate memory (or fail in any way) in machine_kexec(). * We are past the point of no return, committed to rebooting now. */ -NORET_TYPE void machine_kexec(struct kimage *image) +void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; diff --git a/arch/x86/kernel/pci-calgary_64.c b/arch/x86/kernel/pci-calgary_64.c index 19e7fc7c2c4..b67a4b1d4ea 100644 --- a/arch/x86/kernel/pci-calgary_64.c +++ b/arch/x86/kernel/pci-calgary_64.c @@ -37,6 +37,7 @@ #include <linux/delay.h> #include <linux/scatterlist.h> #include <linux/iommu-helper.h> + #include <asm/iommu.h> #include <asm/calgary.h> #include <asm/tce.h> @@ -413,22 +414,6 @@ static void calgary_unmap_sg(struct device *dev, } } -static int calgary_nontranslate_map_sg(struct device* dev, - struct scatterlist *sg, int nelems, int direction) -{ - struct scatterlist *s; - int i; - - for_each_sg(sg, s, nelems, i) { - struct page *p = sg_page(s); - - BUG_ON(!p); - s->dma_address = virt_to_bus(sg_virt(s)); - s->dma_length = s->length; - } - return nelems; -} - static int calgary_map_sg(struct device *dev, struct scatterlist *sg, int nelems, int direction) { @@ -439,9 +424,6 @@ static int calgary_map_sg(struct device *dev, struct scatterlist *sg, unsigned long entry; int i; - if (!translation_enabled(tbl)) - return calgary_nontranslate_map_sg(dev, sg, nelems, direction); - for_each_sg(sg, s, nelems, i) { BUG_ON(!sg_page(s)); @@ -477,7 +459,6 @@ error: static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, size_t size, int direction) { - dma_addr_t dma_handle = bad_dma_address; void *vaddr = phys_to_virt(paddr); unsigned long uaddr; unsigned int npages; @@ -486,12 +467,7 @@ static dma_addr_t calgary_map_single(struct device *dev, phys_addr_t paddr, uaddr = (unsigned long)vaddr; npages = num_dma_pages(uaddr, size); - if (translation_enabled(tbl)) - dma_handle = iommu_alloc(dev, tbl, vaddr, npages, direction); - else - dma_handle = virt_to_bus(vaddr); - - return dma_handle; + return iommu_alloc(dev, tbl, vaddr, npages, direction); } static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, @@ -500,9 +476,6 @@ static void calgary_unmap_single(struct device *dev, dma_addr_t dma_handle, struct iommu_table *tbl = find_iommu_table(dev); unsigned int npages; - if (!translation_enabled(tbl)) - return; - npages = num_dma_pages(dma_handle, size); iommu_free(tbl, dma_handle, npages); } @@ -525,18 +498,12 @@ static void* calgary_alloc_coherent(struct device *dev, size_t size, goto error; memset(ret, 0, size); - if (translation_enabled(tbl)) { - /* set up tces to cover the allocated range */ - mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); - if (mapping == bad_dma_address) - goto free; - - *dma_handle = mapping; - } else /* non translated slot */ - *dma_handle = virt_to_bus(ret); - + /* set up tces to cover the allocated range */ + mapping = iommu_alloc(dev, tbl, ret, npages, DMA_BIDIRECTIONAL); + if (mapping == bad_dma_address) + goto free; + *dma_handle = mapping; return ret; - free: free_pages((unsigned long)ret, get_order(size)); ret = NULL; @@ -544,7 +511,7 @@ error: return ret; } -static const struct dma_mapping_ops calgary_dma_ops = { +static struct dma_mapping_ops calgary_dma_ops = { .alloc_coherent = calgary_alloc_coherent, .map_single = calgary_map_single, .unmap_single = calgary_unmap_single, @@ -1241,6 +1208,16 @@ static int __init calgary_init(void) goto error; } while (1); + dev = NULL; + for_each_pci_dev(dev) { + struct iommu_table *tbl; + + tbl = find_iommu_table(&dev->dev); + + if (translation_enabled(tbl)) + dev->dev.archdata.dma_ops = &calgary_dma_ops; + } + return ret; error: @@ -1262,6 +1239,7 @@ error: calgary_disable_translation(dev); calgary_free_bus(dev); pci_dev_put(dev); /* Undo calgary_init_one()'s pci_dev_get() */ + dev->dev.archdata.dma_ops = NULL; } while (1); return ret; @@ -1503,6 +1481,10 @@ void __init detect_calgary(void) printk(KERN_INFO "PCI-DMA: Calgary TCE table spec is %d, " "CONFIG_IOMMU_DEBUG is %s.\n", specified_table_size, debugging ? "enabled" : "disabled"); + + /* swiotlb for devices that aren't behind the Calgary. */ + if (max_pfn > MAX_DMA32_PFN) + swiotlb = 1; } return; @@ -1519,7 +1501,7 @@ int __init calgary_iommu_init(void) { int ret; - if (no_iommu || swiotlb) + if (no_iommu || (swiotlb && !calgary_detected)) return -ENODEV; if (!calgary_detected) @@ -1532,15 +1514,14 @@ int __init calgary_iommu_init(void) if (ret) { printk(KERN_ERR "PCI-DMA: Calgary init failed %d, " "falling back to no_iommu\n", ret); - if (max_pfn > MAX_DMA32_PFN) - printk(KERN_ERR "WARNING more than 4GB of memory, " - "32bit PCI may malfunction.\n"); return ret; } force_iommu = 1; bad_dma_address = 0x0; - dma_ops = &calgary_dma_ops; + /* dma_ops is set to swiotlb or nommu */ + if (!dma_ops) + dma_ops = &nommu_dma_ops; return 0; } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index cbecb05551b..37544123896 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -11,7 +11,7 @@ static int forbid_dac __read_mostly; -const struct dma_mapping_ops *dma_ops; +struct dma_mapping_ops *dma_ops; EXPORT_SYMBOL(dma_ops); static int iommu_sac_force __read_mostly; @@ -312,6 +312,8 @@ static int dma_release_coherent(struct device *dev, int order, void *vaddr) int dma_supported(struct device *dev, u64 mask) { + struct dma_mapping_ops *ops = get_dma_ops(dev); + #ifdef CONFIG_PCI if (mask > 0xffffffff && forbid_dac > 0) { dev_info(dev, "PCI: Disallowing DAC for device\n"); @@ -319,8 +321,8 @@ int dma_supported(struct device *dev, u64 mask) } #endif - if (dma_ops->dma_supported) - return dma_ops->dma_supported(dev, mask); + if (ops->dma_supported) + return ops->dma_supported(dev, mask); /* Copied from i386. Doesn't make much sense, because it will only work for pci_alloc_coherent. @@ -367,6 +369,7 @@ void * dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t gfp) { + struct dma_mapping_ops *ops = get_dma_ops(dev); void *memory = NULL; struct page *page; unsigned long dma_mask = 0; @@ -435,8 +438,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, /* Let low level make its own zone decisions */ gfp &= ~(GFP_DMA32|GFP_DMA); - if (dma_ops->alloc_coherent) - return dma_ops->alloc_coherent(dev, size, + if (ops->alloc_coherent) + return ops->alloc_coherent(dev, size, dma_handle, gfp); return NULL; } @@ -448,14 +451,14 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, } } - if (dma_ops->alloc_coherent) { + if (ops->alloc_coherent) { free_pages((unsigned long)memory, get_order(size)); gfp &= ~(GFP_DMA|GFP_DMA32); - return dma_ops->alloc_coherent(dev, size, dma_handle, gfp); + return ops->alloc_coherent(dev, size, dma_handle, gfp); } - if (dma_ops->map_simple) { - *dma_handle = dma_ops->map_simple(dev, virt_to_phys(memory), + if (ops->map_simple) { + *dma_handle = ops->map_simple(dev, virt_to_phys(memory), size, PCI_DMA_BIDIRECTIONAL); if (*dma_handle != bad_dma_address) @@ -477,12 +480,14 @@ EXPORT_SYMBOL(dma_alloc_coherent); void dma_free_coherent(struct device *dev, size_t size, void *vaddr, dma_addr_t bus) { + struct dma_mapping_ops *ops = get_dma_ops(dev); + int order = get_order(size); WARN_ON(irqs_disabled()); /* for portability */ if (dma_release_coherent(dev, order, vaddr)) return; - if (dma_ops->unmap_single) - dma_ops->unmap_single(dev, bus, size, 0); + if (ops->unmap_single) + ops->unmap_single(dev, bus, size, 0); free_pages((unsigned long)vaddr, order); } EXPORT_SYMBOL(dma_free_coherent); diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index df5f142657d..744126e6495 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -692,8 +692,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) extern int agp_amd64_init(void); -static const struct dma_mapping_ops gart_dma_ops = { - .mapping_error = NULL, +static struct dma_mapping_ops gart_dma_ops = { .map_single = gart_map_single, .map_simple = gart_map_simple, .unmap_single = gart_unmap_single, diff --git a/arch/x86/kernel/pci-nommu.c b/arch/x86/kernel/pci-nommu.c index 792b9179eff..3f91f71cdc3 100644 --- a/arch/x86/kernel/pci-nommu.c +++ b/arch/x86/kernel/pci-nommu.c @@ -72,21 +72,9 @@ static int nommu_map_sg(struct device *hwdev, struct scatterlist *sg, return nents; } -/* Make sure we keep the same behaviour */ -static int nommu_mapping_error(dma_addr_t dma_addr) -{ -#ifdef CONFIG_X86_32 - return 0; -#else - return (dma_addr == bad_dma_address); -#endif -} - - -const struct dma_mapping_ops nommu_dma_ops = { +struct dma_mapping_ops nommu_dma_ops = { .map_single = nommu_map_single, .map_sg = nommu_map_sg, - .mapping_error = nommu_mapping_error, .is_phys = 1, }; diff --git a/arch/x86/kernel/pci-swiotlb_64.c b/arch/x86/kernel/pci-swiotlb_64.c index 20df839b9c2..c4ce0332759 100644 --- a/arch/x86/kernel/pci-swiotlb_64.c +++ b/arch/x86/kernel/pci-swiotlb_64.c @@ -18,7 +18,7 @@ swiotlb_map_single_phys(struct device *hwdev, phys_addr_t paddr, size_t size, return swiotlb_map_single(hwdev, phys_to_virt(paddr), size, direction); } -const struct dma_mapping_ops swiotlb_dma_ops = { +struct dma_mapping_ops swiotlb_dma_ops = { .mapping_error = swiotlb_dma_mapping_error, .alloc_coherent = swiotlb_alloc_coherent, .free_coherent = swiotlb_free_coherent, diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index c30fe25d470..703310a9902 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -20,11 +20,44 @@ #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) #define PAE_PGD_ATTR (_PAGE_PRESENT) +/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are + * used to save some data for jumping back + */ +#define DATA(offset) (PAGE_SIZE/2+(offset)) + +/* Minimal CPU state */ +#define ESP DATA(0x0) +#define CR0 DATA(0x4) +#define CR3 DATA(0x8) +#define CR4 DATA(0xc) + +/* other data */ +#define CP_VA_CONTROL_PAGE DATA(0x10) +#define CP_PA_PGD DATA(0x14) +#define CP_PA_SWAP_PAGE DATA(0x18) +#define CP_PA_BACKUP_PAGES_MAP DATA(0x1c) + .text .align PAGE_SIZE .globl relocate_kernel relocate_kernel: - movl 8(%esp), %ebp /* list of pages */ + /* Save the CPU context, used for jumping back */ + + pushl %ebx + pushl %esi + pushl %edi + pushl %ebp + pushf + + movl 20+8(%esp), %ebp /* list of pages */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %esp, ESP(%edi) + movl %cr0, %eax + movl %eax, CR0(%edi) + movl %cr3, %eax + movl %eax, CR3(%edi) + movl %cr4, %eax + movl %eax, CR4(%edi) #ifdef CONFIG_X86_PAE /* map the control page at its virtual address */ @@ -138,15 +171,25 @@ relocate_kernel: relocate_new_kernel: /* read the arguments and say goodbye to the stack */ - movl 4(%esp), %ebx /* page_list */ - movl 8(%esp), %ebp /* list of pages */ - movl 12(%esp), %edx /* start address */ - movl 16(%esp), %ecx /* cpu_has_pae */ + movl 20+4(%esp), %ebx /* page_list */ + movl 20+8(%esp), %ebp /* list of pages */ + movl 20+12(%esp), %edx /* start address */ + movl 20+16(%esp), %ecx /* cpu_has_pae */ + movl 20+20(%esp), %esi /* preserve_context */ /* zero out flags, and disable interrupts */ pushl $0 popfl + /* save some information for jumping back */ + movl PTR(VA_CONTROL_PAGE)(%ebp), %edi + movl %edi, CP_VA_CONTROL_PAGE(%edi) + movl PTR(PA_PGD)(%ebp), %eax + movl %eax, CP_PA_PGD(%edi) + movl PTR(PA_SWAP_PAGE)(%ebp), %eax + movl %eax, CP_PA_SWAP_PAGE(%edi) + movl %ebx, CP_PA_BACKUP_PAGES_MAP(%edi) + /* get physical address of control page now */ /* this is impossible after page table switch */ movl PTR(PA_CONTROL_PAGE)(%ebp), %edi @@ -197,8 +240,90 @@ identity_mapped: xorl %eax, %eax movl %eax, %cr3 + movl CP_PA_SWAP_PAGE(%edi), %eax + pushl %eax + pushl %ebx + call swap_pages + addl $8, %esp + + /* To be certain of avoiding problems with self-modifying code + * I need to execute a serializing instruction here. + * So I flush the TLB, it's handy, and not processor dependent. + */ + xorl %eax, %eax + movl %eax, %cr3 + + /* set all of the registers to known values */ + /* leave %esp alone */ + + testl %esi, %esi + jnz 1f + xorl %edi, %edi + xorl %eax, %eax + xorl %ebx, %ebx + xorl %ecx, %ecx + xorl %edx, %edx + xorl %esi, %esi + xorl %ebp, %ebp + ret +1: + popl %edx + movl CP_PA_SWAP_PAGE(%edi), %esp + addl $PAGE_SIZE, %esp +2: + call *%edx + + /* get the re-entry point of the peer system */ + movl 0(%esp), %ebp + call 1f +1: + popl %ebx + subl $(1b - relocate_kernel), %ebx + movl CP_VA_CONTROL_PAGE(%ebx), %edi + lea PAGE_SIZE(%ebx), %esp + movl CP_PA_SWAP_PAGE(%ebx), %eax + movl CP_PA_BACKUP_PAGES_MAP(%ebx), %edx + pushl %eax + pushl %edx + call swap_pages + addl $8, %esp + movl CP_PA_PGD(%ebx), %eax + movl %eax, %cr3 + movl %cr0, %eax + orl $(1<<31), %eax + movl %eax, %cr0 + lea PAGE_SIZE(%edi), %esp + movl %edi, %eax + addl $(virtual_mapped - relocate_kernel), %eax + pushl %eax + ret + +virtual_mapped: + movl CR4(%edi), %eax + movl %eax, %cr4 + movl CR3(%edi), %eax + movl %eax, %cr3 + movl CR0(%edi), %eax + movl %eax, %cr0 + movl ESP(%edi), %esp + movl %ebp, %eax + + popf + popl %ebp + popl %edi + popl %esi + popl %ebx + ret + /* Do the copies */ - movl %ebx, %ecx +swap_pages: + movl 8(%esp), %edx + movl 4(%esp), %ecx + pushl %ebp + pushl %ebx + pushl %edi + pushl %esi + movl %ecx, %ebx jmp 1f 0: /* top, read another word from the indirection page */ @@ -226,27 +351,28 @@ identity_mapped: movl %ecx, %esi /* For every source page do a copy */ andl $0xfffff000, %esi + movl %edi, %eax + movl %esi, %ebp + + movl %edx, %edi movl $1024, %ecx rep ; movsl - jmp 0b -3: - - /* To be certain of avoiding problems with self-modifying code - * I need to execute a serializing instruction here. - * So I flush the TLB, it's handy, and not processor dependent. - */ - xorl %eax, %eax - movl %eax, %cr3 + movl %ebp, %edi + movl %eax, %esi + movl $1024, %ecx + rep ; movsl - /* set all of the registers to known values */ - /* leave %esp alone */ + movl %eax, %edi + movl %edx, %esi + movl $1024, %ecx + rep ; movsl - xorl %eax, %eax - xorl %ebx, %ebx - xorl %ecx, %ecx - xorl %edx, %edx - xorl %esi, %esi - xorl %edi, %edi - xorl %ebp, %ebp + lea PAGE_SIZE(%ebp), %esi + jmp 0b +3: + popl %esi + popl %edi + popl %ebx + popl %ebp ret diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index b0e4ddca6c1..2fa231923cf 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1814,6 +1814,7 @@ int kvm_mmu_unprotect_page_virt(struct kvm_vcpu *vcpu, gva_t gva) spin_unlock(&vcpu->kvm->mmu_lock); return r; } +EXPORT_SYMBOL_GPL(kvm_mmu_unprotect_page_virt); void __kvm_mmu_free_some_pages(struct kvm_vcpu *vcpu) { @@ -1870,6 +1871,12 @@ void kvm_enable_tdp(void) } EXPORT_SYMBOL_GPL(kvm_enable_tdp); +void kvm_disable_tdp(void) +{ + tdp_enabled = false; +} +EXPORT_SYMBOL_GPL(kvm_disable_tdp); + static void free_mmu_pages(struct kvm_vcpu *vcpu) { struct kvm_mmu_page *sp; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index b756e876dce..e2ee264740c 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -453,7 +453,8 @@ static __init int svm_hardware_setup(void) if (npt_enabled) { printk(KERN_INFO "kvm: Nested Paging enabled\n"); kvm_enable_tdp(); - } + } else + kvm_disable_tdp(); return 0; @@ -1007,10 +1008,13 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) struct kvm *kvm = svm->vcpu.kvm; u64 fault_address; u32 error_code; + bool event_injection = false; if (!irqchip_in_kernel(kvm) && - is_external_interrupt(exit_int_info)) + is_external_interrupt(exit_int_info)) { + event_injection = true; push_irq(&svm->vcpu, exit_int_info & SVM_EVTINJ_VEC_MASK); + } fault_address = svm->vmcb->control.exit_info_2; error_code = svm->vmcb->control.exit_info_1; @@ -1024,6 +1028,8 @@ static int pf_interception(struct vcpu_svm *svm, struct kvm_run *kvm_run) (u32)fault_address, (u32)(fault_address >> 32), handler); + if (event_injection) + kvm_mmu_unprotect_page_virt(&svm->vcpu, fault_address); return kvm_mmu_page_fault(&svm->vcpu, fault_address, error_code); } diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 0cac6370171..2a69773e3b2 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -2298,6 +2298,8 @@ static int handle_exception(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) cr2 = vmcs_readl(EXIT_QUALIFICATION); KVMTRACE_3D(PAGE_FAULT, vcpu, error_code, (u32)cr2, (u32)((u64)cr2 >> 32), handler); + if (vect_info & VECTORING_INFO_VALID_MASK) + kvm_mmu_unprotect_page_virt(vcpu, cr2); return kvm_mmu_page_fault(vcpu, cr2, error_code); } @@ -3116,15 +3118,6 @@ static struct kvm_vcpu *vmx_create_vcpu(struct kvm *kvm, unsigned int id) return ERR_PTR(-ENOMEM); allocate_vpid(vmx); - if (id == 0 && vm_need_ept()) { - kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | - VMX_EPT_WRITABLE_MASK | - VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); - kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, - VMX_EPT_FAKE_DIRTY_MASK, 0ull, - VMX_EPT_EXECUTABLE_MASK); - kvm_enable_tdp(); - } err = kvm_vcpu_init(&vmx->vcpu, kvm, id); if (err) @@ -3303,8 +3296,17 @@ static int __init vmx_init(void) vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_ESP); vmx_disable_intercept_for_msr(vmx_msr_bitmap, MSR_IA32_SYSENTER_EIP); - if (cpu_has_vmx_ept()) + if (vm_need_ept()) { bypass_guest_pf = 0; + kvm_mmu_set_base_ptes(VMX_EPT_READABLE_MASK | + VMX_EPT_WRITABLE_MASK | + VMX_EPT_DEFAULT_MT << VMX_EPT_MT_EPTE_SHIFT); + kvm_mmu_set_mask_ptes(0ull, VMX_EPT_FAKE_ACCESSED_MASK, + VMX_EPT_FAKE_DIRTY_MASK, 0ull, + VMX_EPT_EXECUTABLE_MASK); + kvm_enable_tdp(); + } else + kvm_disable_tdp(); if (bypass_guest_pf) kvm_mmu_set_nonpresent_ptes(~0xffeull, 0ull); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 9f1cdb011cf..5916191420c 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -3184,6 +3184,10 @@ static void seg_desct_to_kvm_desct(struct desc_struct *seg_desc, u16 selector, kvm_desct->base |= seg_desc->base2 << 24; kvm_desct->limit = seg_desc->limit0; kvm_desct->limit |= seg_desc->limit << 16; + if (seg_desc->g) { + kvm_desct->limit <<= 12; + kvm_desct->limit |= 0xfff; + } kvm_desct->selector = selector; kvm_desct->type = seg_desc->type; kvm_desct->present = seg_desc->p; @@ -3223,6 +3227,7 @@ static void get_segment_descritptor_dtable(struct kvm_vcpu *vcpu, static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, struct desc_struct *seg_desc) { + gpa_t gpa; struct descriptor_table dtable; u16 index = selector >> 3; @@ -3232,13 +3237,16 @@ static int load_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, kvm_queue_exception_e(vcpu, GP_VECTOR, selector & 0xfffc); return 1; } - return kvm_read_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8); + gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base); + gpa += index * 8; + return kvm_read_guest(vcpu->kvm, gpa, seg_desc, 8); } /* allowed just for 8 bytes segments */ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, struct desc_struct *seg_desc) { + gpa_t gpa; struct descriptor_table dtable; u16 index = selector >> 3; @@ -3246,7 +3254,9 @@ static int save_guest_segment_descriptor(struct kvm_vcpu *vcpu, u16 selector, if (dtable.limit < index * 8 + 7) return 1; - return kvm_write_guest(vcpu->kvm, dtable.base + index * 8, seg_desc, 8); + gpa = vcpu->arch.mmu.gva_to_gpa(vcpu, dtable.base); + gpa += index * 8; + return kvm_write_guest(vcpu->kvm, gpa, seg_desc, 8); } static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, @@ -3258,55 +3268,7 @@ static u32 get_tss_base_addr(struct kvm_vcpu *vcpu, base_addr |= (seg_desc->base1 << 16); base_addr |= (seg_desc->base2 << 24); - return base_addr; -} - -static int load_tss_segment32(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_32 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_read_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_32)); -} - -static int save_tss_segment32(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_32 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_write_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_32)); -} - -static int load_tss_segment16(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_16 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_read_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_16)); -} - -static int save_tss_segment16(struct kvm_vcpu *vcpu, - struct desc_struct *seg_desc, - struct tss_segment_16 *tss) -{ - u32 base_addr; - - base_addr = get_tss_base_addr(vcpu, seg_desc); - - return kvm_write_guest(vcpu->kvm, base_addr, tss, - sizeof(struct tss_segment_16)); + return vcpu->arch.mmu.gva_to_gpa(vcpu, base_addr); } static u16 get_segment_selector(struct kvm_vcpu *vcpu, int seg) @@ -3466,20 +3428,26 @@ static int load_state_from_tss16(struct kvm_vcpu *vcpu, } static int kvm_task_switch_16(struct kvm_vcpu *vcpu, u16 tss_selector, - struct desc_struct *cseg_desc, + u32 old_tss_base, struct desc_struct *nseg_desc) { struct tss_segment_16 tss_segment_16; int ret = 0; - if (load_tss_segment16(vcpu, cseg_desc, &tss_segment_16)) + if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_16, + sizeof tss_segment_16)) goto out; save_state_to_tss16(vcpu, &tss_segment_16); - save_tss_segment16(vcpu, cseg_desc, &tss_segment_16); - if (load_tss_segment16(vcpu, nseg_desc, &tss_segment_16)) + if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_16, + sizeof tss_segment_16)) goto out; + + if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc), + &tss_segment_16, sizeof tss_segment_16)) + goto out; + if (load_state_from_tss16(vcpu, &tss_segment_16)) goto out; @@ -3489,20 +3457,26 @@ out: } static int kvm_task_switch_32(struct kvm_vcpu *vcpu, u16 tss_selector, - struct desc_struct *cseg_desc, + u32 old_tss_base, struct desc_struct *nseg_desc) { struct tss_segment_32 tss_segment_32; int ret = 0; - if (load_tss_segment32(vcpu, cseg_desc, &tss_segment_32)) + if (kvm_read_guest(vcpu->kvm, old_tss_base, &tss_segment_32, + sizeof tss_segment_32)) goto out; save_state_to_tss32(vcpu, &tss_segment_32); - save_tss_segment32(vcpu, cseg_desc, &tss_segment_32); - if (load_tss_segment32(vcpu, nseg_desc, &tss_segment_32)) + if (kvm_write_guest(vcpu->kvm, old_tss_base, &tss_segment_32, + sizeof tss_segment_32)) + goto out; + + if (kvm_read_guest(vcpu->kvm, get_tss_base_addr(vcpu, nseg_desc), + &tss_segment_32, sizeof tss_segment_32)) goto out; + if (load_state_from_tss32(vcpu, &tss_segment_32)) goto out; @@ -3517,16 +3491,20 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) struct desc_struct cseg_desc; struct desc_struct nseg_desc; int ret = 0; + u32 old_tss_base = get_segment_base(vcpu, VCPU_SREG_TR); + u16 old_tss_sel = get_segment_selector(vcpu, VCPU_SREG_TR); - kvm_get_segment(vcpu, &tr_seg, VCPU_SREG_TR); + old_tss_base = vcpu->arch.mmu.gva_to_gpa(vcpu, old_tss_base); + /* FIXME: Handle errors. Failure to read either TSS or their + * descriptors should generate a pagefault. + */ if (load_guest_segment_descriptor(vcpu, tss_selector, &nseg_desc)) goto out; - if (load_guest_segment_descriptor(vcpu, tr_seg.selector, &cseg_desc)) + if (load_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc)) goto out; - if (reason != TASK_SWITCH_IRET) { int cpl; @@ -3544,8 +3522,7 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) if (reason == TASK_SWITCH_IRET || reason == TASK_SWITCH_JMP) { cseg_desc.type &= ~(1 << 1); //clear the B flag - save_guest_segment_descriptor(vcpu, tr_seg.selector, - &cseg_desc); + save_guest_segment_descriptor(vcpu, old_tss_sel, &cseg_desc); } if (reason == TASK_SWITCH_IRET) { @@ -3557,10 +3534,10 @@ int kvm_task_switch(struct kvm_vcpu *vcpu, u16 tss_selector, int reason) kvm_x86_ops->cache_regs(vcpu); if (nseg_desc.type & 8) - ret = kvm_task_switch_32(vcpu, tss_selector, &cseg_desc, + ret = kvm_task_switch_32(vcpu, tss_selector, old_tss_base, &nseg_desc); else - ret = kvm_task_switch_16(vcpu, tss_selector, &cseg_desc, + ret = kvm_task_switch_16(vcpu, tss_selector, old_tss_base, &nseg_desc); if (reason == TASK_SWITCH_CALL || reason == TASK_SWITCH_GATE) { diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index 1fbb844c3d7..2977ea37791 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,6 +1,7 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ pat.o pgtable.o +obj-$(CONFIG_HAVE_GET_USER_PAGES_FAST) += gup.o obj-$(CONFIG_X86_32) += pgtable_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c new file mode 100644 index 00000000000..3085f25b435 --- /dev/null +++ b/arch/x86/mm/gup.c @@ -0,0 +1,295 @@ +/* + * Lockless get_user_pages_fast for x86 + * + * Copyright (C) 2008 Nick Piggin + * Copyright (C) 2008 Novell Inc. + */ +#include <linux/sched.h> +#include <linux/mm.h> +#include <linux/vmstat.h> +#include <linux/highmem.h> + +#include <asm/pgtable.h> + +static inline pte_t gup_get_pte(pte_t *ptep) +{ +#ifndef CONFIG_X86_PAE + return *ptep; +#else + /* + * With get_user_pages_fast, we walk down the pagetables without taking + * any locks. For this we would like to load the pointers atoimcally, + * but that is not possible (without expensive cmpxchg8b) on PAE. What + * we do have is the guarantee that a pte will only either go from not + * present to present, or present to not present or both -- it will not + * switch to a completely different present page without a TLB flush in + * between; something that we are blocking by holding interrupts off. + * + * Setting ptes from not present to present goes: + * ptep->pte_high = h; + * smp_wmb(); + * ptep->pte_low = l; + * + * And present to not present goes: + * ptep->pte_low = 0; + * smp_wmb(); + * ptep->pte_high = 0; + * + * We must ensure here that the load of pte_low sees l iff pte_high + * sees h. We load pte_high *after* loading pte_low, which ensures we + * don't see an older value of pte_high. *Then* we recheck pte_low, + * which ensures that we haven't picked up a changed pte high. We might + * have got rubbish values from pte_low and pte_high, but we are + * guaranteed that pte_low will not have the present bit set *unless* + * it is 'l'. And get_user_pages_fast only operates on present ptes, so + * we're safe. + * + * gup_get_pte should not be used or copied outside gup.c without being + * very careful -- it does not atomically load the pte or anything that + * is likely to be useful for you. + */ + pte_t pte; + +retry: + pte.pte_low = ptep->pte_low; + smp_rmb(); + pte.pte_high = ptep->pte_high; + smp_rmb(); + if (unlikely(pte.pte_low != ptep->pte_low)) + goto retry; + + return pte; +#endif +} + +/* + * The performance critical leaf functions are made noinline otherwise gcc + * inlines everything into a single function which results in too much + * register pressure. + */ +static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t *ptep; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + + ptep = pte_offset_map(&pmd, addr); + do { + pte_t pte = gup_get_pte(ptep); + struct page *page; + + if ((pte_val(pte) & (mask | _PAGE_SPECIAL)) != mask) { + pte_unmap(ptep); + return 0; + } + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + page = pte_page(pte); + get_page(page); + pages[*nr] = page; + (*nr)++; + + } while (ptep++, addr += PAGE_SIZE, addr != end); + pte_unmap(ptep - 1); + + return 1; +} + +static inline void get_head_page_multiple(struct page *page, int nr) +{ + VM_BUG_ON(page != compound_head(page)); + VM_BUG_ON(page_count(page) == 0); + atomic_add(nr, &page->_count); +} + +static noinline int gup_huge_pmd(pmd_t pmd, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t pte = *(pte_t *)&pmd; + struct page *head, *page; + int refs; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PMD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + get_head_page_multiple(head, refs); + + return 1; +} + +static int gup_pmd_range(pud_t pud, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pmd_t *pmdp; + + pmdp = pmd_offset(&pud, addr); + do { + pmd_t pmd = *pmdp; + + next = pmd_addr_end(addr, end); + if (pmd_none(pmd)) + return 0; + if (unlikely(pmd_large(pmd))) { + if (!gup_huge_pmd(pmd, addr, next, write, pages, nr)) + return 0; + } else { + if (!gup_pte_range(pmd, addr, next, write, pages, nr)) + return 0; + } + } while (pmdp++, addr = next, addr != end); + + return 1; +} + +static noinline int gup_huge_pud(pud_t pud, unsigned long addr, + unsigned long end, int write, struct page **pages, int *nr) +{ + unsigned long mask; + pte_t pte = *(pte_t *)&pud; + struct page *head, *page; + int refs; + + mask = _PAGE_PRESENT|_PAGE_USER; + if (write) + mask |= _PAGE_RW; + if ((pte_val(pte) & mask) != mask) + return 0; + /* hugepages are never "special" */ + VM_BUG_ON(pte_val(pte) & _PAGE_SPECIAL); + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); + + refs = 0; + head = pte_page(pte); + page = head + ((addr & ~PUD_MASK) >> PAGE_SHIFT); + do { + VM_BUG_ON(compound_head(page) != head); + pages[*nr] = page; + (*nr)++; + page++; + refs++; + } while (addr += PAGE_SIZE, addr != end); + get_head_page_multiple(head, refs); + + return 1; +} + +static int gup_pud_range(pgd_t pgd, unsigned long addr, unsigned long end, + int write, struct page **pages, int *nr) +{ + unsigned long next; + pud_t *pudp; + + pudp = pud_offset(&pgd, addr); + do { + pud_t pud = *pudp; + + next = pud_addr_end(addr, end); + if (pud_none(pud)) + return 0; + if (unlikely(pud_large(pud))) { + if (!gup_huge_pud(pud, addr, next, write, pages, nr)) + return 0; + } else { + if (!gup_pmd_range(pud, addr, next, write, pages, nr)) + return 0; + } + } while (pudp++, addr = next, addr != end); + + return 1; +} + +int get_user_pages_fast(unsigned long start, int nr_pages, int write, + struct page **pages) +{ + struct mm_struct *mm = current->mm; + unsigned long end = start + (nr_pages << PAGE_SHIFT); + unsigned long addr = start; + unsigned long next; + pgd_t *pgdp; + int nr = 0; + + if (unlikely(!access_ok(write ? VERIFY_WRITE : VERIFY_READ, + start, nr_pages*PAGE_SIZE))) + goto slow_irqon; + + /* + * XXX: batch / limit 'nr', to avoid large irq off latency + * needs some instrumenting to determine the common sizes used by + * important workloads (eg. DB2), and whether limiting the batch size + * will decrease performance. + * + * It seems like we're in the clear for the moment. Direct-IO is + * the main guy that batches up lots of get_user_pages, and even + * they are limited to 64-at-a-time which is not so many. + */ + /* + * This doesn't prevent pagetable teardown, but does prevent + * the pagetables and pages from being freed on x86. + * + * So long as we atomically load page table pointers versus teardown + * (which we do on x86, with the above PAE exception), we can follow the + * address down to the the page and take a ref on it. + */ + local_irq_disable(); + pgdp = pgd_offset(mm, addr); + do { + pgd_t pgd = *pgdp; + + next = pgd_addr_end(addr, end); + if (pgd_none(pgd)) + goto slow; + if (!gup_pud_range(pgd, addr, next, write, pages, &nr)) + goto slow; + } while (pgdp++, addr = next, addr != end); + local_irq_enable(); + + VM_BUG_ON(nr != (end - start) >> PAGE_SHIFT); + return nr; + + { + int ret; + +slow: + local_irq_enable(); +slow_irqon: + /* Try to get the remaining pages with get_user_pages */ + start += nr << PAGE_SHIFT; + pages += nr; + + down_read(&mm->mmap_sem); + ret = get_user_pages(current, mm, start, + (end - start) >> PAGE_SHIFT, write, 0, pages, NULL); + up_read(&mm->mmap_sem); + + /* Have to be a bit careful with return values */ + if (nr > 0) { + if (ret < 0) + ret = nr; + else + ret += nr; + } + + return ret; + } +} diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index ec37121f670..129618ca0ea 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -86,43 +86,6 @@ early_param("gbpages", parse_direct_gbpages_on); * around without checking the pgd every time. */ -void show_mem(void) -{ - long i, total = 0, reserved = 0; - long shared = 0, cached = 0; - struct page *page; - pg_data_t *pgdat; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - /* - * This loop can take a while with 256 GB and - * 4k pages so defer the NMI watchdog: - */ - if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) - touch_nmi_watchdog(); - - if (!pfn_valid(pgdat->node_start_pfn + i)) - continue; - - page = pfn_to_page(pgdat->node_start_pfn + i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - } - printk(KERN_INFO "%lu pages of RAM\n", total); - printk(KERN_INFO "%lu reserved pages\n", reserved); - printk(KERN_INFO "%lu pages shared\n", shared); - printk(KERN_INFO "%lu pages swap cached\n", cached); -} - int after_bootmem; static __init void *spp_getpage(void) diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index b4becbf8c57..cab0abbd1eb 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -20,53 +20,6 @@ #include <asm/tlb.h> #include <asm/tlbflush.h> -void show_mem(void) -{ - int total = 0, reserved = 0; - int shared = 0, cached = 0; - int highmem = 0; - struct page *page; - pg_data_t *pgdat; - unsigned long i; - unsigned long flags; - - printk(KERN_INFO "Mem-info:\n"); - show_free_areas(); - for_each_online_pgdat(pgdat) { - pgdat_resize_lock(pgdat, &flags); - for (i = 0; i < pgdat->node_spanned_pages; ++i) { - if (unlikely(i % MAX_ORDER_NR_PAGES == 0)) - touch_nmi_watchdog(); - page = pgdat_page_nr(pgdat, i); - total++; - if (PageHighMem(page)) - highmem++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; - } - pgdat_resize_unlock(pgdat, &flags); - } - printk(KERN_INFO "%d pages of RAM\n", total); - printk(KERN_INFO "%d pages of HIGHMEM\n", highmem); - printk(KERN_INFO "%d reserved pages\n", reserved); - printk(KERN_INFO "%d pages shared\n", shared); - printk(KERN_INFO "%d pages swap cached\n", cached); - - printk(KERN_INFO "%lu pages dirty\n", global_page_state(NR_FILE_DIRTY)); - printk(KERN_INFO "%lu pages writeback\n", - global_page_state(NR_WRITEBACK)); - printk(KERN_INFO "%lu pages mapped\n", global_page_state(NR_FILE_MAPPED)); - printk(KERN_INFO "%lu pages slab\n", - global_page_state(NR_SLAB_RECLAIMABLE) + - global_page_state(NR_SLAB_UNRECLAIMABLE)); - printk(KERN_INFO "%lu pages pagetables\n", - global_page_state(NR_PAGETABLE)); -} - /* * Associate a virtual page frame with a given physical page frame * and protection flags for that frame. diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index 81d0560eaea..34163cfaaff 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -280,36 +280,9 @@ void free_initmem(void) (&__init_end - &__init_begin) >> 10); } -void show_mem(void) -{ - int i, free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0; - - printk("Mem-info:\n"); - show_free_areas(); - printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); - i = max_mapnr; - while (i-- > 0) { - total++; - if (PageReserved(mem_map+i)) - reserved++; - else if (PageSwapCache(mem_map+i)) - cached++; - else if (!page_count(mem_map + i)) - free++; - else - shared += page_count(mem_map + i) - 1; - } - printk("%d pages of RAM\n", total); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n",cached); - printk("%d free pages\n", free); -} - struct kmem_cache *pgtable_cache __read_mostly; -static void pgd_ctor(struct kmem_cache *cache, void* addr) +static void pgd_ctor(void* addr) { pte_t* ptep = (pte_t*)addr; int i; |