diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/sh/Kconfig | 2 | ||||
-rw-r--r-- | arch/sh/kernel/cpu/sh4a/clock-sh7722.c | 796 |
2 files changed, 138 insertions, 660 deletions
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index dbc10ff495a..b5629cdc37a 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -516,7 +516,7 @@ config SH_CLK_CPG config SH_CLK_CPG_LEGACY depends on SH_CLK_CPG - def_bool y if !CPU_SUBTYPE_SH7785 && !CPU_SUBTYPE_SH7723 && !CPU_SUBTYPE_SH7724 && !CPU_SUBTYPE_SH7343 && !CPU_SUBTYPE_SH7366 + def_bool y if !CPU_SUBTYPE_SH7785 && !ARCH_SHMOBILE config SH_CLK_MD int "CPU Mode Pin Setting" diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 6ca7c745580..40f859354f7 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -1,719 +1,197 @@ /* * arch/sh/kernel/cpu/sh4a/clock-sh7722.c * - * SH7722 support for the clock framework + * SH7722 clock framework support * - * Copyright (c) 2006-2007 Nomad Global Solutions Inc - * Based on code for sh7343 by Paul Mundt + * Copyright (C) 2009 Magnus Damm * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/init.h> #include <linux/kernel.h> #include <linux/io.h> -#include <linux/errno.h> -#include <linux/stringify.h> #include <asm/clock.h> -#include <asm/freq.h> - -#define N (-1) -#define NM (-2) -#define ROUND_NEAREST 0 -#define ROUND_DOWN -1 -#define ROUND_UP +1 - -static int adjust_algos[][3] = { - {}, /* NO_CHANGE */ - { NM, N, 1 }, /* N:1, N:1 */ - { 3, 2, 2 }, /* 3:2:2 */ - { 5, 2, 2 }, /* 5:2:2 */ - { N, 1, 1 }, /* N:1:1 */ - - { N, 1 }, /* N:1 */ - { N, 1 }, /* N:1 */ - { 3, 2 }, - { 4, 3 }, - { 5, 4 }, - - { N, 1 } +/* SH7722 registers */ +#define FRQCR 0xa4150000 +#define VCLKCR 0xa4150004 +#define SCLKACR 0xa4150008 +#define SCLKBCR 0xa415000c +#define IRDACLKCR 0xa4150018 +#define PLLCR 0xa4150024 +#define MSTPCR0 0xa4150030 +#define MSTPCR1 0xa4150034 +#define MSTPCR2 0xa4150038 +#define DLLFRQ 0xa4150050 + +/* Fixed 32 KHz root clock for RTC and Power Management purposes */ +static struct clk r_clk = { + .name = "rclk", + .id = -1, + .rate = 32768, }; -static unsigned long adjust_pair_of_clocks(unsigned long r1, unsigned long r2, - int m1, int m2, int round_flag) -{ - unsigned long rem, div; - int the_one = 0; - - pr_debug( "Actual values: r1 = %ld\n", r1); - pr_debug( "...............r2 = %ld\n", r2); - - if (m1 == m2) { - r2 = r1; - pr_debug( "setting equal rates: r2 now %ld\n", r2); - } else if ((m2 == N && m1 == 1) || - (m2 == NM && m1 == N)) { /* N:1 or NM:N */ - pr_debug( "Setting rates as 1:N (N:N*M)\n"); - rem = r2 % r1; - pr_debug( "...remainder = %ld\n", rem); - if (rem) { - div = r2 / r1; - pr_debug( "...div = %ld\n", div); - switch (round_flag) { - case ROUND_NEAREST: - the_one = rem >= r1/2 ? 1 : 0; break; - case ROUND_UP: - the_one = 1; break; - case ROUND_DOWN: - the_one = 0; break; - } - - r2 = r1 * (div + the_one); - pr_debug( "...setting r2 to %ld\n", r2); - } - } else if ((m2 == 1 && m1 == N) || - (m2 == N && m1 == NM)) { /* 1:N or N:NM */ - pr_debug( "Setting rates as N:1 (N*M:N)\n"); - rem = r1 % r2; - pr_debug( "...remainder = %ld\n", rem); - if (rem) { - div = r1 / r2; - pr_debug( "...div = %ld\n", div); - switch (round_flag) { - case ROUND_NEAREST: - the_one = rem > r2/2 ? 1 : 0; break; - case ROUND_UP: - the_one = 0; break; - case ROUND_DOWN: - the_one = 1; break; - } - - r2 = r1 / (div + the_one); - pr_debug( "...setting r2 to %ld\n", r2); - } - } else { /* value:value */ - pr_debug( "Setting rates as %d:%d\n", m1, m2); - div = r1 / m1; - r2 = div * m2; - pr_debug( "...div = %ld\n", div); - pr_debug( "...setting r2 to %ld\n", r2); - } - - return r2; -} - -static void adjust_clocks(int originate, int *l, unsigned long v[], - int n_in_line) -{ - int x; - - pr_debug( "Go down from %d...\n", originate); - /* go up recalculation clocks */ - for (x = originate; x>0; x -- ) - v[x-1] = adjust_pair_of_clocks(v[x], v[x-1], - l[x], l[x-1], - ROUND_UP); - - pr_debug( "Go up from %d...\n", originate); - /* go down recalculation clocks */ - for (x = originate; x<n_in_line - 1; x ++ ) - v[x+1] = adjust_pair_of_clocks(v[x], v[x+1], - l[x], l[x+1], - ROUND_UP); -} - - /* - * SH7722 uses a common set of multipliers and divisors, so this - * is quite simple.. + * Default rate for the root input clock, reset this with clk_set_rate() + * from the platform code. */ - -#define STCPLL(frqcr) (((frqcr >> 24) & 0x1f) + 1) - -/* - * Instead of having two separate multipliers/divisors set, like this: - * - * static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; - * static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; - * - * I created the divisors2 array, which is used to calculate rate like - * rate = parent * 2 / divisors2[ divisor ]; -*/ -static int divisors2[] = { 2, 3, 4, 5, 6, 8, 10, 12, 16, 20, 24, 32, 40 }; - -static unsigned long master_clk_recalc(struct clk *clk) -{ - unsigned frqcr = ctrl_inl(FRQCR); - - return CONFIG_SH_PCLK_FREQ * STCPLL(frqcr); -} - -static void master_clk_init(struct clk *clk) -{ - clk->parent = NULL; - clk->rate = master_clk_recalc(clk); -} - -static unsigned long module_clk_recalc(struct clk *clk) -{ - unsigned long frqcr = ctrl_inl(FRQCR); - - return clk->parent->rate / STCPLL(frqcr); -} - -#define MASTERDIVS { 2, 3, 4, 6, 8, 16 } -#define STCMASK 0x1f -#define DIVCALC(div) (div-1) -#define FRQCRKICK 0x00000000 - -static int master_clk_setrate(struct clk *clk, unsigned long rate, int id) -{ - int div = rate / clk->rate; - int master_divs[] = MASTERDIVS; - int index; - unsigned long frqcr; - - for (index = 1; index < ARRAY_SIZE(master_divs); index++) - if (div >= master_divs[index - 1] && div < master_divs[index]) - break; - - if (index >= ARRAY_SIZE(master_divs)) - index = ARRAY_SIZE(master_divs); - div = master_divs[index - 1]; - - frqcr = ctrl_inl(FRQCR); - frqcr &= ~(STCMASK << 24); - frqcr |= (DIVCALC(div) << 24); - frqcr |= FRQCRKICK; - ctrl_outl(frqcr, FRQCR); - - return 0; -} - -static struct clk_ops sh7722_master_clk_ops = { - .init = master_clk_init, - .recalc = master_clk_recalc, - .set_rate = master_clk_setrate, -}; - -static struct clk_ops sh7722_module_clk_ops = { - .recalc = module_clk_recalc, -}; - -struct frqcr_context { - unsigned mask; - unsigned shift; -}; - -struct frqcr_context sh7722_get_clk_context(const char *name) -{ - struct frqcr_context ctx = { 0, }; - - if (!strcmp(name, "peripheral_clk")) { - ctx.shift = 0; - ctx.mask = 0xF; - } else if (!strcmp(name, "sdram_clk")) { - ctx.shift = 4; - ctx.mask = 0xF; - } else if (!strcmp(name, "bus_clk")) { - ctx.shift = 8; - ctx.mask = 0xF; - } else if (!strcmp(name, "sh_clk")) { - ctx.shift = 12; - ctx.mask = 0xF; - } else if (!strcmp(name, "umem_clk")) { - ctx.shift = 16; - ctx.mask = 0xF; - } else if (!strcmp(name, "cpu_clk")) { - ctx.shift = 20; - ctx.mask = 7; - } - return ctx; -} - -/** - * sh7722_find_div_index - find divisor for setting rate - * - * All sh7722 clocks use the same set of multipliers/divisors. This function - * chooses correct divisor to set the rate of clock with parent clock that - * generates frequency of 'parent_rate' - * - * @parent_rate: rate of parent clock - * @rate: requested rate to be set - */ -static int sh7722_find_div_index(unsigned long parent_rate, unsigned rate) -{ - unsigned div2 = parent_rate * 2 / rate; - int index; - - if (rate > parent_rate) - return -EINVAL; - - for (index = 1; index < ARRAY_SIZE(divisors2); index++) { - if (div2 > divisors2[index - 1] && div2 <= divisors2[index]) - break; - } - if (index >= ARRAY_SIZE(divisors2)) - index = ARRAY_SIZE(divisors2) - 1; - return index; -} - -static unsigned long sh7722_frqcr_recalc(struct clk *clk) -{ - struct frqcr_context ctx = sh7722_get_clk_context(clk->name); - unsigned long frqcr = ctrl_inl(FRQCR); - int index; - - index = (frqcr >> ctx.shift) & ctx.mask; - return clk->parent->rate * 2 / divisors2[index]; -} - -static int sh7722_frqcr_set_rate(struct clk *clk, unsigned long rate, - int algo_id) -{ - struct frqcr_context ctx = sh7722_get_clk_context(clk->name); - unsigned long parent_rate = clk->parent->rate; - int div; - unsigned long frqcr; - int err = 0; - - /* pretty invalid */ - if (parent_rate < rate) - return -EINVAL; - - /* look for multiplier/divisor pair */ - div = sh7722_find_div_index(parent_rate, rate); - if (div<0) - return div; - - /* calculate new value of clock rate */ - clk->rate = parent_rate * 2 / divisors2[div]; - frqcr = ctrl_inl(FRQCR); - - /* FIXME: adjust as algo_id specifies */ - if (algo_id != NO_CHANGE) { - int originator; - char *algo_group_1[] = { "cpu_clk", "umem_clk", "sh_clk" }; - char *algo_group_2[] = { "sh_clk", "bus_clk" }; - char *algo_group_3[] = { "sh_clk", "sdram_clk" }; - char *algo_group_4[] = { "bus_clk", "peripheral_clk" }; - char *algo_group_5[] = { "cpu_clk", "peripheral_clk" }; - char **algo_current = NULL; - /* 3 is the maximum number of clocks in relation */ - struct clk *ck[3]; - unsigned long values[3]; /* the same comment as above */ - int part_length = -1; - int i; - - /* - * all the steps below only required if adjustion was - * requested - */ - if (algo_id == IUS_N1_N1 || - algo_id == IUS_322 || - algo_id == IUS_522 || - algo_id == IUS_N11) { - algo_current = algo_group_1; - part_length = 3; - } - if (algo_id == SB_N1) { - algo_current = algo_group_2; - part_length = 2; - } - if (algo_id == SB3_N1 || - algo_id == SB3_32 || - algo_id == SB3_43 || - algo_id == SB3_54) { - algo_current = algo_group_3; - part_length = 2; - } - if (algo_id == BP_N1) { - algo_current = algo_group_4; - part_length = 2; - } - if (algo_id == IP_N1) { - algo_current = algo_group_5; - part_length = 2; - } - if (!algo_current) - goto incorrect_algo_id; - - originator = -1; - for (i = 0; i < part_length; i ++ ) { - if (originator >= 0 && !strcmp(clk->name, - algo_current[i])) - originator = i; - ck[i] = clk_get(NULL, algo_current[i]); - values[i] = clk_get_rate(ck[i]); - } - - if (originator >= 0) - adjust_clocks(originator, adjust_algos[algo_id], - values, part_length); - - for (i = 0; i < part_length; i ++ ) { - struct frqcr_context part_ctx; - int part_div; - - if (likely(!err)) { - part_div = sh7722_find_div_index(parent_rate, - rate); - if (part_div > 0) { - part_ctx = sh7722_get_clk_context( - ck[i]->name); - frqcr &= ~(part_ctx.mask << - part_ctx.shift); - frqcr |= part_div << part_ctx.shift; - } else - err = part_div; - } - - ck[i]->ops->recalc(ck[i]); - clk_put(ck[i]); - } - } - - /* was there any error during recalculation ? If so, bail out.. */ - if (unlikely(err!=0)) - goto out_err; - - /* clear FRQCR bits */ - frqcr &= ~(ctx.mask << ctx.shift); - frqcr |= div << ctx.shift; - frqcr |= FRQCRKICK; - - /* ...and perform actual change */ - ctrl_outl(frqcr, FRQCR); - return 0; - -incorrect_algo_id: - return -EINVAL; -out_err: - return err; -} - -static long sh7722_frqcr_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long parent_rate = clk->parent->rate; - int div; - - /* look for multiplier/divisor pair */ - div = sh7722_find_div_index(parent_rate, rate); - if (div < 0) - return clk->rate; - - /* calculate new value of clock rate */ - return parent_rate * 2 / divisors2[div]; -} - -static struct clk_ops sh7722_frqcr_clk_ops = { - .recalc = sh7722_frqcr_recalc, - .set_rate = sh7722_frqcr_set_rate, - .round_rate = sh7722_frqcr_round_rate, +struct clk extal_clk = { + .name = "extal", + .id = -1, + .rate = 33333333, }; -/* - * clock ops methods for SIU A/B and IrDA clock - */ -static int sh7722_siu_set_rate(struct clk *clk, unsigned long rate, int algo_id) -{ - unsigned long r; - int div; - - r = ctrl_inl(clk->arch_flags); - div = sh7722_find_div_index(clk->parent->rate, rate); - if (div < 0) - return div; - r = (r & ~0xF) | div; - ctrl_outl(r, clk->arch_flags); - return 0; -} - -static unsigned long sh7722_siu_recalc(struct clk *clk) -{ - unsigned long r; - - r = ctrl_inl(clk->arch_flags); - return clk->parent->rate * 2 / divisors2[r & 0xF]; -} - -static int sh7722_siu_start_stop(struct clk *clk, int enable) +/* The dll block multiplies the 32khz r_clk, may be used instead of extal */ +static unsigned long dll_recalc(struct clk *clk) { - unsigned long r; + unsigned long mult; - r = ctrl_inl(clk->arch_flags); - if (enable) - ctrl_outl(r & ~(1 << 8), clk->arch_flags); + if (__raw_readl(PLLCR) & 0x1000) + mult = __raw_readl(DLLFRQ); else - ctrl_outl(r | (1 << 8), clk->arch_flags); - return 0; -} + mult = 0; -static int sh7722_siu_enable(struct clk *clk) -{ - return sh7722_siu_start_stop(clk, 1); -} - -static void sh7722_siu_disable(struct clk *clk) -{ - sh7722_siu_start_stop(clk, 0); + return clk->parent->rate * mult; } -static struct clk_ops sh7722_siu_clk_ops = { - .recalc = sh7722_siu_recalc, - .set_rate = sh7722_siu_set_rate, - .enable = sh7722_siu_enable, - .disable = sh7722_siu_disable, +static struct clk_ops dll_clk_ops = { + .recalc = dll_recalc, }; -static int sh7722_video_enable(struct clk *clk) -{ - unsigned long r; - - r = ctrl_inl(VCLKCR); - ctrl_outl( r & ~(1<<8), VCLKCR); - return 0; -} - -static void sh7722_video_disable(struct clk *clk) -{ - unsigned long r; - - r = ctrl_inl(VCLKCR); - ctrl_outl( r | (1<<8), VCLKCR); -} +static struct clk dll_clk = { + .name = "dll_clk", + .id = -1, + .ops = &dll_clk_ops, + .parent = &r_clk, + .flags = CLK_ENABLE_ON_INIT, +}; -static int sh7722_video_set_rate(struct clk *clk, unsigned long rate, - int algo_id) +static unsigned long pll_recalc(struct clk *clk) { - unsigned long r; + unsigned long mult = 1; + unsigned long div = 1; - r = ctrl_inl(VCLKCR); - r &= ~0x3F; - r |= ((clk->parent->rate / rate - 1) & 0x3F); - ctrl_outl(r, VCLKCR); - return 0; -} - -static unsigned long sh7722_video_recalc(struct clk *clk) -{ - unsigned long r; + if (__raw_readl(PLLCR) & 0x4000) + mult = (((__raw_readl(FRQCR) >> 24) & 0x1f) + 1); + else + div = 2; - r = ctrl_inl(VCLKCR); - return clk->parent->rate / ((r & 0x3F) + 1); + return (clk->parent->rate * mult) / div; } -static struct clk_ops sh7722_video_clk_ops = { - .recalc = sh7722_video_recalc, - .set_rate = sh7722_video_set_rate, - .enable = sh7722_video_enable, - .disable = sh7722_video_disable, -}; -/* - * and at last, clock definitions themselves - */ -static struct clk sh7722_umem_clock = { - .name = "umem_clk", - .ops = &sh7722_frqcr_clk_ops, +static struct clk_ops pll_clk_ops = { + .recalc = pll_recalc, }; -static struct clk sh7722_sh_clock = { - .name = "sh_clk", - .ops = &sh7722_frqcr_clk_ops, +static struct clk pll_clk = { + .name = "pll_clk", + .id = -1, + .ops = &pll_clk_ops, + .flags = CLK_ENABLE_ON_INIT, }; -static struct clk sh7722_peripheral_clock = { - .name = "peripheral_clk", - .ops = &sh7722_frqcr_clk_ops, +struct clk *main_clks[] = { + &r_clk, + &extal_clk, + &dll_clk, + &pll_clk, }; -static struct clk sh7722_sdram_clock = { - .name = "sdram_clk", - .ops = &sh7722_frqcr_clk_ops, -}; +static int multipliers[] = { 1, 2, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1 }; +static int divisors[] = { 1, 3, 2, 5, 3, 4, 5, 6, 8, 10, 12, 16, 20 }; -static struct clk sh7722_r_clock = { - .name = "r_clk", - .rate = 32768, +static struct clk_div_mult_table div4_table = { + .divisors = divisors, + .nr_divisors = ARRAY_SIZE(divisors), + .multipliers = multipliers, + .nr_multipliers = ARRAY_SIZE(multipliers), }; -/* - * these three clocks - SIU A, SIU B, IrDA - share the same clk_ops - * methods of clk_ops determine which register they should access by - * examining clk->name field - */ -static struct clk sh7722_siu_a_clock = { - .name = "siu_a_clk", - .arch_flags = SCLKACR, - .ops = &sh7722_siu_clk_ops, -}; +enum { DIV4_I, DIV4_U, DIV4_SH, DIV4_B, DIV4_B3, DIV4_P, + DIV4_SIUA, DIV4_SIUB, DIV4_IRDA, DIV4_NR }; -static struct clk sh7722_siu_b_clock = { - .name = "siu_b_clk", - .arch_flags = SCLKBCR, - .ops = &sh7722_siu_clk_ops, -}; +#define DIV4(_str, _reg, _bit, _mask, _flags) \ + SH_CLK_DIV4(_str, &pll_clk, _reg, _bit, _mask, _flags) -#if defined(CONFIG_CPU_SUBTYPE_SH7722) -static struct clk sh7722_irda_clock = { - .name = "irda_clk", - .arch_flags = IrDACLKCR, - .ops = &sh7722_siu_clk_ops, +struct clk div4_clks[DIV4_NR] = { + [DIV4_I] = DIV4("cpu_clk", FRQCR, 20, 0x1fef, CLK_ENABLE_ON_INIT), + [DIV4_U] = DIV4("umem_clk", FRQCR, 16, 0x1fff, CLK_ENABLE_ON_INIT), + [DIV4_SH] = DIV4("shyway_clk", FRQCR, 12, 0x1fff, CLK_ENABLE_ON_INIT), + [DIV4_B] = DIV4("bus_clk", FRQCR, 8, 0x1fff, CLK_ENABLE_ON_INIT), + [DIV4_B3] = DIV4("b3_clk", FRQCR, 4, 0x1fff, CLK_ENABLE_ON_INIT), + [DIV4_P] = DIV4("peripheral_clk", FRQCR, 0, 0x1fff, 0), + [DIV4_SIUA] = DIV4("siua_clk", SCLKACR, 0, 0x1fff, 0), + [DIV4_SIUB] = DIV4("siub_clk", SCLKBCR, 0, 0x1fff, 0), + [DIV4_IRDA] = DIV4("irda_clk", IRDACLKCR, 0, 0x1fff, 0), }; -#endif -static struct clk sh7722_video_clock = { - .name = "video_clk", - .ops = &sh7722_video_clk_ops, +struct clk div6_clks[] = { + SH_CLK_DIV6("video_clk", &pll_clk, VCLKCR, 0), }; -#define MSTPCR_ARCH_FLAGS(reg, bit) (((reg) << 8) | (bit)) -#define MSTPCR_ARCH_FLAGS_REG(value) ((value) >> 8) -#define MSTPCR_ARCH_FLAGS_BIT(value) ((value) & 0xff) - -static int sh7722_mstpcr_start_stop(struct clk *clk, int enable) -{ - unsigned long bit = MSTPCR_ARCH_FLAGS_BIT(clk->arch_flags); - unsigned long reg; - unsigned long r; +#define MSTP(_str, _parent, _reg, _bit, _flags) \ + SH_CLK_MSTP32(_str, -1, _parent, _reg, _bit, _flags) - switch(MSTPCR_ARCH_FLAGS_REG(clk->arch_flags)) { - case 0: - reg = MSTPCR0; - break; - case 1: - reg = MSTPCR1; - break; - case 2: - reg = MSTPCR2; - break; - default: - return -EINVAL; - } +static struct clk mstp_clks[] = { + MSTP("uram0", &div4_clks[DIV4_U], MSTPCR0, 28, CLK_ENABLE_ON_INIT), + MSTP("xymem0", &div4_clks[DIV4_B], MSTPCR0, 26, CLK_ENABLE_ON_INIT), + MSTP("tmu0", &div4_clks[DIV4_P], MSTPCR0, 15, 0), + MSTP("cmt0", &r_clk, MSTPCR0, 14, 0), + MSTP("rwdt0", &r_clk, MSTPCR0, 13, 0), + MSTP("flctl0", &div4_clks[DIV4_P], MSTPCR0, 10, 0), + MSTP("scif0", &div4_clks[DIV4_P], MSTPCR0, 7, 0), + MSTP("scif1", &div4_clks[DIV4_P], MSTPCR0, 6, 0), + MSTP("scif2", &div4_clks[DIV4_P], MSTPCR0, 5, 0), - r = ctrl_inl(reg); - - if (enable) - r &= ~(1 << bit); - else - r |= (1 << bit); + MSTP("i2c0", &div4_clks[DIV4_P], MSTPCR1, 9, 0), + MSTP("rtc0", &r_clk, MSTPCR1, 8, 0), - ctrl_outl(r, reg); - return 0; -} - -static int sh7722_mstpcr_enable(struct clk *clk) -{ - return sh7722_mstpcr_start_stop(clk, 1); -} - -static void sh7722_mstpcr_disable(struct clk *clk) -{ - sh7722_mstpcr_start_stop(clk, 0); -} - -static struct clk_ops sh7722_mstpcr_clk_ops = { - .enable = sh7722_mstpcr_enable, - .disable = sh7722_mstpcr_disable, - .recalc = followparent_recalc, -}; - -#define MSTPCR(_name, _parent, regnr, bitnr, _flags) \ -{ \ - .name = _name, \ - .flags = _flags, \ - .arch_flags = MSTPCR_ARCH_FLAGS(regnr, bitnr), \ - .ops = (void *)_parent, \ -} - -static struct clk sh7722_mstpcr_clocks[] = { -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - MSTPCR("uram0", "umem_clk", 0, 28, CLK_ENABLE_ON_INIT), - MSTPCR("xymem0", "bus_clk", 0, 26, CLK_ENABLE_ON_INIT), - MSTPCR("tmu0", "peripheral_clk", 0, 15, 0), - MSTPCR("cmt0", "r_clk", 0, 14, 0), - MSTPCR("rwdt0", "r_clk", 0, 13, 0), - MSTPCR("flctl0", "peripheral_clk", 0, 10, 0), - MSTPCR("scif0", "peripheral_clk", 0, 7, 0), - MSTPCR("scif1", "peripheral_clk", 0, 6, 0), - MSTPCR("scif2", "peripheral_clk", 0, 5, 0), - MSTPCR("i2c0", "peripheral_clk", 1, 9, 0), - MSTPCR("rtc0", "r_clk", 1, 8, 0), - MSTPCR("sdhi0", "peripheral_clk", 2, 18, 0), - MSTPCR("keysc0", "r_clk", 2, 14, 0), - MSTPCR("usbf0", "peripheral_clk", 2, 11, 0), - MSTPCR("2dg0", "bus_clk", 2, 9, 0), - MSTPCR("siu0", "bus_clk", 2, 8, 0), - MSTPCR("vou0", "bus_clk", 2, 5, 0), - MSTPCR("jpu0", "bus_clk", 2, 6, CLK_ENABLE_ON_INIT), - MSTPCR("beu0", "bus_clk", 2, 4, 0), - MSTPCR("ceu0", "bus_clk", 2, 3, 0), - MSTPCR("veu0", "bus_clk", 2, 2, CLK_ENABLE_ON_INIT), - MSTPCR("vpu0", "bus_clk", 2, 1, CLK_ENABLE_ON_INIT), - MSTPCR("lcdc0", "bus_clk", 2, 0, 0), -#endif -}; - -static struct clk *sh7722_clocks[] = { - &sh7722_umem_clock, - &sh7722_sh_clock, - &sh7722_peripheral_clock, - &sh7722_sdram_clock, - &sh7722_siu_a_clock, - &sh7722_siu_b_clock, -#if defined(CONFIG_CPU_SUBTYPE_SH7722) - &sh7722_irda_clock, -#endif - &sh7722_video_clock, -}; - -/* - * init in order: master, module, bus, cpu - */ -struct clk_ops *onchip_ops[] = { - &sh7722_master_clk_ops, - &sh7722_module_clk_ops, - &sh7722_frqcr_clk_ops, - &sh7722_frqcr_clk_ops, + MSTP("sdhi0", &div4_clks[DIV4_P], MSTPCR2, 18, 0), + MSTP("keysc0", &r_clk, MSTPCR2, 14, 0), + MSTP("usbf0", &div4_clks[DIV4_P], MSTPCR2, 11, 0), + MSTP("2dg0", &div4_clks[DIV4_B], MSTPCR2, 9, 0), + MSTP("siu0", &div4_clks[DIV4_B], MSTPCR2, 8, 0), + MSTP("vou0", &div4_clks[DIV4_B], MSTPCR2, 5, 0), + MSTP("jpu0", &div4_clks[DIV4_B], MSTPCR2, 6, CLK_ENABLE_ON_INIT), + MSTP("beu0", &div4_clks[DIV4_B], MSTPCR2, 4, 0), + MSTP("ceu0", &div4_clks[DIV4_B], MSTPCR2, 3, 0), + MSTP("veu0", &div4_clks[DIV4_B], MSTPCR2, 2, CLK_ENABLE_ON_INIT), + MSTP("vpu0", &div4_clks[DIV4_B], MSTPCR2, 1, CLK_ENABLE_ON_INIT), + MSTP("lcdc0", &div4_clks[DIV4_B], MSTPCR2, 0, 0), }; -void __init -arch_init_clk_ops(struct clk_ops **ops, int type) -{ - BUG_ON(type < 0 || type >= ARRAY_SIZE(onchip_ops)); - *ops = onchip_ops[type]; -} - int __init arch_clk_init(void) { - struct clk *clk; - int i; + int k, ret = 0; - cpg_clk_init(); + /* autodetect extal or dll configuration */ + if (__raw_readl(PLLCR) & 0x1000) + pll_clk.parent = &dll_clk; + else + pll_clk.parent = &extal_clk; - clk = clk_get(NULL, "master_clk"); - for (i = 0; i < ARRAY_SIZE(sh7722_clocks); i++) { - pr_debug( "Registering clock '%s'\n", sh7722_clocks[i]->name); - sh7722_clocks[i]->parent = clk; - clk_register(sh7722_clocks[i]); - } - clk_put(clk); + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); - clk_register(&sh7722_r_clock); + if (!ret) + ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table); - for (i = 0; i < ARRAY_SIZE(sh7722_mstpcr_clocks); i++) { - pr_debug( "Registering mstpcr clock '%s'\n", - sh7722_mstpcr_clocks[i].name); - clk = clk_get(NULL, (void *) sh7722_mstpcr_clocks[i].ops); - sh7722_mstpcr_clocks[i].parent = clk; - sh7722_mstpcr_clocks[i].ops = &sh7722_mstpcr_clk_ops; - clk_register(&sh7722_mstpcr_clocks[i]); - clk_put(clk); - } + if (!ret) + ret = sh_clk_div6_register(div6_clks, ARRAY_SIZE(div6_clks)); - propagate_rate(&sh7722_r_clock); /* make sure rate gets propagated */ + if (!ret) + ret = sh_clk_mstp32_register(mstp_clks, ARRAY_SIZE(mstp_clks)); - return 0; + return ret; } |