diff options
Diffstat (limited to 'arch')
49 files changed, 2631 insertions, 742 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 2c370c869be..2cb9c35b14e 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -896,10 +896,12 @@ config ARCH_NOMADIK select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC + select CLKSRC_NOMADIK_MTU select COMMON_CLK select CPU_ARM926T select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 + select USE_OF select PINCTRL select PINCTRL_STN8815 select SPARSE_IRQ diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 042f2111485..411ab1614a0 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -96,11 +96,13 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ imx28-apf28dev.dtb \ imx28-apx4devkit.dtb \ imx28-cfa10036.dtb \ + imx28-cfa10037.dtb \ imx28-cfa10049.dtb \ imx28-evk.dtb \ imx28-m28evk.dtb \ imx28-sps1.dtb \ imx28-tx28.dtb +dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-beagle.dtb \ omap3-beagle-xm.dtb \ @@ -135,8 +137,10 @@ dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ spear320-hmi.dtb dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun4i-a10-cubieboard.dtb \ + sun4i-a10-hackberry.dtb \ sun5i-a13-olinuxino.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ tegra20-paz00.dtb \ tegra20-plutux.dtb \ @@ -145,6 +149,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ + tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ tegra114-dalmore.dtb \ diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 74d92cd29d8..5160210f74d 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -78,6 +78,10 @@ bus-width = <4>; }; }; + + watchdog@fffffd40 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index 222047f1ece..b0268a5f4b4 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -29,6 +29,9 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + ssc0 = &ssc0; + ssc1 = &ssc1; + ssc2 = &ssc2; }; cpus { cpu@0 { @@ -88,6 +91,52 @@ interrupts = <20 4 0 21 4 0 22 4 0>; }; + mmc0: mmc@fffb4000 { + compatible = "atmel,hsmci"; + reg = <0xfffb4000 0x4000>; + interrupts = <10 4 0>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + ssc0: ssc@fffd0000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd0000 0x4000>; + interrupts = <14 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + status = "disable"; + }; + + ssc1: ssc@fffd4000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd4000 0x4000>; + interrupts = <15 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + status = "disable"; + }; + + ssc2: ssc@fffd8000 { + compatible = "atmel,at91rm9200-ssc"; + reg = <0xfffd8000 0x4000>; + interrupts = <16 4 5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + status = "disable"; + }; + + macb0: ethernet@fffbc000 { + compatible = "cdns,at91rm9200-emac", "cdns,emac"; + reg = <0xfffbc000 0x4000>; + interrupts = <24 4 3>; + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_macb_rmii>; + status = "disabled"; + }; + pinctrl@fffff400 { #address-cells = <1>; #size-cells = <1>; @@ -207,6 +256,115 @@ }; }; + macb { + pinctrl_macb_rmii: macb_rmii-0 { + atmel,pins = + <0 7 0x1 0x0 /* PA7 periph A */ + 0 8 0x1 0x0 /* PA8 periph A */ + 0 9 0x1 0x0 /* PA9 periph A */ + 0 10 0x1 0x0 /* PA10 periph A */ + 0 11 0x1 0x0 /* PA11 periph A */ + 0 12 0x1 0x0 /* PA12 periph A */ + 0 13 0x1 0x0 /* PA13 periph A */ + 0 14 0x1 0x0 /* PA14 periph A */ + 0 15 0x1 0x0 /* PA15 periph A */ + 0 16 0x1 0x0>; /* PA16 periph A */ + }; + + pinctrl_macb_rmii_mii: macb_rmii_mii-0 { + atmel,pins = + <1 12 0x2 0x0 /* PB12 periph B */ + 1 13 0x2 0x0 /* PB13 periph B */ + 1 14 0x2 0x0 /* PB14 periph B */ + 1 15 0x2 0x0 /* PB15 periph B */ + 1 16 0x2 0x0 /* PB16 periph B */ + 1 17 0x2 0x0 /* PB17 periph B */ + 1 18 0x2 0x0 /* PB18 periph B */ + 1 19 0x2 0x0>; /* PB19 periph B */ + }; + }; + + mmc0 { + pinctrl_mmc0_clk: mmc0_clk-0 { + atmel,pins = + <0 27 0x1 0x0>; /* PA27 periph A */ + }; + + pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 { + atmel,pins = + <0 28 0x1 0x1 /* PA28 periph A with pullup */ + 0 29 0x1 0x1>; /* PA29 periph A with pullup */ + }; + + pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 { + atmel,pins = + <1 3 0x2 0x1 /* PB3 periph B with pullup */ + 1 4 0x2 0x1 /* PB4 periph B with pullup */ + 1 5 0x2 0x1>; /* PB5 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 { + atmel,pins = + <0 8 0x2 0x1 /* PA8 periph B with pullup */ + 0 9 0x2 0x1>; /* PA9 periph B with pullup */ + }; + + pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 { + atmel,pins = + <0 10 0x2 0x1 /* PA10 periph B with pullup */ + 0 11 0x2 0x1 /* PA11 periph B with pullup */ + 0 12 0x2 0x1>; /* PA12 periph B with pullup */ + }; + }; + + ssc0 { + pinctrl_ssc0_tx: ssc0_tx-0 { + atmel,pins = + <1 0 0x1 0x0 /* PB0 periph A */ + 1 1 0x1 0x0 /* PB1 periph A */ + 1 2 0x1 0x0>; /* PB2 periph A */ + }; + + pinctrl_ssc0_rx: ssc0_rx-0 { + atmel,pins = + <1 3 0x1 0x0 /* PB3 periph A */ + 1 4 0x1 0x0 /* PB4 periph A */ + 1 5 0x1 0x0>; /* PB5 periph A */ + }; + }; + + ssc1 { + pinctrl_ssc1_tx: ssc1_tx-0 { + atmel,pins = + <1 6 0x1 0x0 /* PB6 periph A */ + 1 7 0x1 0x0 /* PB7 periph A */ + 1 8 0x1 0x0>; /* PB8 periph A */ + }; + + pinctrl_ssc1_rx: ssc1_rx-0 { + atmel,pins = + <1 9 0x1 0x0 /* PB9 periph A */ + 1 10 0x1 0x0 /* PB10 periph A */ + 1 11 0x1 0x0>; /* PB11 periph A */ + }; + }; + + ssc2 { + pinctrl_ssc2_tx: ssc2_tx-0 { + atmel,pins = + <1 12 0x1 0x0 /* PB12 periph A */ + 1 13 0x1 0x0 /* PB13 periph A */ + 1 14 0x1 0x0>; /* PB14 periph A */ + }; + + pinctrl_ssc2_rx: ssc2_rx-0 { + atmel,pins = + <1 15 0x1 0x0 /* PB15 periph A */ + 1 16 0x1 0x0 /* PB16 periph A */ + 1 17 0x1 0x0>; /* PB17 periph A */ + }; + }; + pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x200>; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index 8aa48931e0a..e586d85f8e2 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -44,6 +44,11 @@ status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + }; + usb1: gadget@fffb0000 { atmel,vbus-gpio = <&pioD 4 0>; status = "okay"; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 4801717566d..7750f98dd76 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -382,8 +382,9 @@ reg = < 0x40000000 0x10000000 0xffffe000 0x00000600 0xffffe600 0x00000200 - 0x00100000 0x00100000 + 0x00108000 0x00018000 >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 0376bf4fd66..d400f8de438 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -71,7 +71,10 @@ nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index d112c3af8ce..aa98e641931 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -512,7 +512,11 @@ #address-cells = <1>; #size-cells = <1>; reg = <0x40000000 0x10000000 + 0xffffe000 0x600 /* PMECC Registers */ + 0xffffe600 0x200 /* PMECC Error Location Registers */ + 0x00108000 0x18000 /* PMECC looup table in ROM code */ >; + atmel,pmecc-lookup-table-offset = <0x0 0x8000>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 31e7be23703..4027ac7e450 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -26,7 +26,10 @@ ahb { nand0: nand@40000000 { nand-bus-width = <8>; - nand-ecc-mode = "soft"; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; nand-on-flash-bbt; status = "okay"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 9b72054a0bc..aafda174a60 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -1,5 +1,4 @@ /dts-v1/; -/memreserve/ 0x0c000000 0x04000000; /include/ "bcm2835.dtsi" / { @@ -25,3 +24,18 @@ brcm,function = <7>; /* alt3 */ }; }; + +&i2c0 { + status = "okay"; + clock-frequency = <100000>; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <100000>; +}; + +&sdhci { + status = "okay"; + bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index 8917550fd1b..4bf2a8774aa 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -63,5 +63,49 @@ interrupt-controller; #interrupt-cells = <2>; }; + + i2c0: i2c@20205000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e205000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + i2c1: i2c@20804000 { + compatible = "brcm,bcm2835-i2c"; + reg = <0x7e804000 0x1000>; + interrupts = <2 21>; + clocks = <&clk_i2c>; + status = "disabled"; + }; + + sdhci: sdhci { + compatible = "brcm,bcm2835-sdhci"; + reg = <0x7e300000 0x100>; + interrupts = <2 30>; + clocks = <&clk_mmc>; + status = "disabled"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk_mmc: mmc { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <100000000>; + }; + + clk_i2c: i2c { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <150000000>; + }; }; }; diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 37dc5a3243b..f712fb607a4 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -15,6 +15,9 @@ model = "DA850/AM1808/OMAP-L138 EVM"; soc { + pmx_core: pinmux@1c14120 { + status = "okay"; + }; serial0: serial@1c42000 { status = "okay"; }; @@ -24,5 +27,22 @@ serial2: serial@1d0d000 { status = "okay"; }; + rtc0: rtc@1c23000 { + status = "okay"; + }; + i2c0: i2c@1c22000 { + status = "okay"; + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + }; + wdt: wdt@1c21000 { + status = "okay"; + }; + }; + nand_cs3@62000000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&nand_cs3_pins>; }; }; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 640ab75c20d..3ec1bda6435 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -28,14 +28,47 @@ #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x01c00000 0x400000>; + interrupt-parent = <&intc>; + pmx_core: pinmux@1c14120 { + compatible = "pinctrl-single"; + reg = <0x14120 0x50>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0xffffffff>; + status = "disabled"; + + nand_cs3_pins: pinmux_nand_pins { + pinctrl-single,bits = < + /* EMA_OE, EMA_WE */ + 0x1c 0x00110000 0x00ff0000 + /* EMA_CS[4],EMA_CS[3]*/ + 0x1c 0x00000110 0x00000ff0 + /* + * EMA_D[0], EMA_D[1], EMA_D[2], + * EMA_D[3], EMA_D[4], EMA_D[5], + * EMA_D[6], EMA_D[7] + */ + 0x24 0x11111111 0xffffffff + /* EMA_A[1], EMA_A[2] */ + 0x30 0x01100000 0x0ff00000 + >; + }; + i2c0_pins: pinmux_i2c0_pins { + pinctrl-single,bits = < + /* I2C0_SDA,I2C0_SCL */ + 0x10 0x00002200 0x0000ff00 + >; + }; + }; serial0: serial@1c42000 { compatible = "ns16550a"; reg = <0x42000 0x100>; clock-frequency = <150000000>; reg-shift = <2>; interrupts = <25>; - interrupt-parent = <&intc>; status = "disabled"; }; serial1: serial@1d0c000 { @@ -44,7 +77,6 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <53>; - interrupt-parent = <&intc>; status = "disabled"; }; serial2: serial@1d0d000 { @@ -53,8 +85,40 @@ clock-frequency = <150000000>; reg-shift = <2>; interrupts = <61>; - interrupt-parent = <&intc>; status = "disabled"; }; + rtc0: rtc@1c23000 { + compatible = "ti,da830-rtc"; + reg = <0x23000 0x1000>; + interrupts = <19 + 19>; + status = "disabled"; + }; + i2c0: i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + interrupts = <15>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + wdt: wdt@1c21000 { + compatible = "ti,davinci-wdt"; + reg = <0x21000 0x1000>; + status = "disabled"; + }; + }; + nand_cs3@62000000 { + compatible = "ti,davinci-nand"; + reg = <0x62000000 0x807ff + 0x68000000 0x8000>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts new file mode 100644 index 00000000000..c2ef3a3d655 --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -0,0 +1,77 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10037 Board"; + compatible = "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + pinctrl-names = "default", "default"; + pinctrl-1 = <&hog_pins_cfa10037>; + + hog_pins_cfa10037: hog-10037@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio2 21 0>; + phy-reset-duration = <100>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts index bdc80a4453d..a0d3e9f1738 100644 --- a/arch/arm/boot/dts/imx28-cfa10049.dts +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -23,69 +23,120 @@ apbh@80000000 { pinctrl@80018000 { pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10049>; + pinctrl-1 = <&hog_pins_cfa10049 + &hog_pins_cfa10049_pullup>; hog_pins_cfa10049: hog-10049@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + 0x1153 /* MX28_PAD_LCD_D22__GPIO_1_21 */ 0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */ 0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */ 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ + 0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; - spi3_pins_cfa10049: spi3-cfa10049@0 { + hog_pins_cfa10049_pullup: hog-10049-pullup@0 { reg = <0>; fsl,pinmux-ids = < - 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ - 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ - 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ - 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ - 0x01b2 /* MX28_PAD_GPMI_CLE__SSP3_D5 */ + 0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */ + 0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */ + 0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */ + 0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ >; - fsl,drive-strength = <1>; + fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <1>; }; - }; - ssp3: ssp@80016000 { - compatible = "fsl,imx28-spi"; - pinctrl-names = "default"; - pinctrl-0 = <&spi3_pins_cfa10049>; - status = "okay"; + spi2_pins_cfa10049: spi2-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */ + 0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */ + 0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; - gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; + spi3_pins_cfa10049: spi3-cfa10049@0 { reg = <0>; - registers-number = <2>; - spi-max-frequency = <100000>; + fsl,pinmux-ids = < + 0x0183 /* MX28_PAD_GPMI_RDN__GPIO_0_24 */ + 0x01c3 /* MX28_PAD_GPMI_RESETN__GPIO_0_28 */ + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x01a3 /* MX28_PAD_GPMI_ALE__GPIO_0_26 */ + 0x01b3 /* MX28_PAD_GPMI_CLE__GPIO_0_27 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; }; - gpio6: gpio6@1 { - compatible = "fairchild,74hc595"; - gpio-controller; - #gpio-cells = <2>; - reg = <1>; - registers-number = <4>; - spi-max-frequency = <100000>; + lcdif_18bit |