diff options
Diffstat (limited to 'arch')
160 files changed, 947 insertions, 1252 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 24626b0419e..a48aecc17ea 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -754,7 +754,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select HAVE_CLK select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB @@ -825,7 +825,6 @@ config ARCH_S5PC100 select HAVE_CLK select CLKDEV_LOOKUP select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS @@ -842,7 +841,6 @@ config ARCH_S5PV210 select HAVE_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_SCHED_CLOCK diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40319d91bb7..1683bfb9166 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MX5) := mx5 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index b2dc2dd7f1d..c47d6199b78 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -41,6 +41,7 @@ #include <asm/irq.h> #include <asm/exception.h> +#include <asm/smp_plat.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> @@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = 0; - -#ifdef CONFIG_SMP - cpu = cpu_logical_map(smp_processor_id()); -#endif + u32 cpu = cpu_logical_map(smp_processor_id()); cpumask = 1 << cpu; cpumask |= cpumask << 8; diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index d0d8dfece37..3a4fb2e5fc6 100644 --- a/arch/arm/configs/mx5_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUPS=y CONFIG_RELAY=y CONFIG_EXPERT=y # CONFIG_SLUB_DEBUG is not set @@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MXC=y -CONFIG_ARCH_MX5=y -CONFIG_MACH_MX51_BABBAGE=y +CONFIG_MACH_MX31LILLY=y +CONFIG_MACH_MX31LITE=y +CONFIG_MACH_PCM037=y +CONFIG_MACH_PCM037_EET=y +CONFIG_MACH_MX31_3DS=y +CONFIG_MACH_MX31MOBOARD=y +CONFIG_MACH_QONG=y +CONFIG_MACH_ARMADILLO5X0=y +CONFIG_MACH_KZM_ARM11_01=y +CONFIG_MACH_PCM043=y +CONFIG_MACH_MX35_3DS=y +CONFIG_MACH_EUKREA_CPUIMX35=y +CONFIG_MACH_VPR200=y +CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_MX53_EVK=y -CONFIG_MACH_MX53_SMD=y -CONFIG_MACH_MX53_LOCO=y -CONFIG_MACH_MX53_ARD=y +CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y @@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y @@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y CONFIG_ATA=y CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -CONFIG_BROADCOM_PHY=y -CONFIG_ICPLUS_PHY=y -CONFIG_REALTEK_PHY=y -CONFIG_NATIONAL_PHY=y -CONFIG_STE10XP=y -CONFIG_LSI_ET1011C_PHY=y -CONFIG_MICREL_PHY=y -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CHELSIO is not set +# CONFIG_NET_VENDOR_FARADAY is not set +CONFIG_FEC=y +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MARVELL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +CONFIG_SMC91X=y +CONFIG_SMC911X=y +CONFIG_SMSC911X=y +# CONFIG_NET_VENDOR_STMICRO is not set # CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y @@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_STORAGE=y CONFIG_MMC=y -CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_ESDHC_IMX=y @@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y CONFIG_RTC_MXC=y +CONFIG_DMADEVICES=y +CONFIG_IMX_SDMA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig deleted file mode 100644 index cb0717fbb03..00000000000 --- a/arch/arm/configs/mx3_defconfig +++ /dev/null @@ -1,144 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_MXC=y -CONFIG_MACH_MX31ADS_WM1133_EV1=y -CONFIG_MACH_MX31LILLY=y -CONFIG_MACH_MX31LITE=y -CONFIG_MACH_PCM037=y -CONFIG_MACH_PCM037_EET=y -CONFIG_MACH_MX31_3DS=y -CONFIG_MACH_MX31MOBOARD=y -CONFIG_MACH_QONG=y -CONFIG_MACH_ARMADILLO5X0=y -CONFIG_MACH_KZM_ARM11_01=y -CONFIG_MACH_PCM043=y -CONFIG_MACH_MX35_3DS=y -CONFIG_MACH_EUKREA_CPUIMX35=y -CONFIG_MXC_IRQ_PRIOR=y -CONFIG_MXC_PWM=y -CONFIG_ARM_ERRATA_411920=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -CONFIG_VFP=y -CONFIG_PM_DEBUG=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_MXC=y -CONFIG_MTD_UBI=y -# CONFIG_BLK_DEV is not set -CONFIG_MISC_DEVICES=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_SMSC911X=y -CONFIG_DNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_IMX=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_8250=m -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_IMX=y -CONFIG_SPI=y -CONFIG_W1=y -CONFIG_W1_MASTER_MXC=y -CONFIG_W1_SLAVE_THERM=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_IMX2_WDT=y -CONFIG_MFD_WM8350_I2C=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_WM8350=y -CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_DEV=y -# CONFIG_RC_CORE is not set -# CONFIG_MEDIA_TUNER_CUSTOMISE is not set -CONFIG_SOC_CAMERA=y -CONFIG_SOC_CAMERA_MT9M001=y -CONFIG_SOC_CAMERA_MT9M111=y -CONFIG_SOC_CAMERA_MT9T031=y -CONFIG_SOC_CAMERA_MT9V022=y -CONFIG_SOC_CAMERA_TW9910=y -CONFIG_SOC_CAMERA_OV772X=y -CONFIG_VIDEO_MX3=y -# CONFIG_RADIO_ADAPTERS is not set -CONFIG_FB=y -CONFIG_SOUND=y -CONFIG_SND=y -# CONFIG_SND_ARM is not set -# CONFIG_SND_SPI is not set -CONFIG_SND_SOC=y -CONFIG_SND_IMX_SOC=y -CONFIG_SND_MXC_SOC_WM1133_EV1=y -CONFIG_SND_SOC_PHYCORE_AC97=y -CONFIG_SND_SOC_EUKREA_TLV320=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_MXC=y -CONFIG_USB_GADGET=m -CONFIG_USB_FSL_USB2=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_ULPI=y -CONFIG_MMC=y -CONFIG_MMC_MXC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_MXC=y -CONFIG_DMADEVICES=y -# CONFIG_DNOTIFY is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_UBIFS_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b6e65dedfd7..62f8095d46d 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -237,7 +237,7 @@ */ #ifdef CONFIG_THUMB2_KERNEL - .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T() + .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER() 9999: .if \inc == 1 \instr\cond\()b\()\t\().w \reg, [\ptr, #\off] @@ -277,7 +277,7 @@ #else /* !CONFIG_THUMB2_KERNEL */ - .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T() + .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER() .rept \rept 9999: .if \inc == 1 diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index af18ceaacf5..b5dc173d336 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -83,9 +83,9 @@ * instructions (inline assembly) */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) #instr "t" +#define TUSER(instr) #instr "t" #else -#define T(instr) #instr +#define TUSER(instr) #instr #endif #else /* __ASSEMBLY__ */ @@ -95,9 +95,9 @@ * instructions */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) instr ## t +#define TUSER(instr) instr ## t #else -#define T(instr) instr +#define TUSER(instr) instr #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 253cc86318b..7be54690aee 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%3]\n" \ + "1: " TUSER(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%3]\n" \ + "2: " TUSER(str) " %0, [%3]\n" \ " mov %0, #0\n" \ __futex_atomic_ex_table("%5") \ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ @@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" - "1: " T(ldr) " %1, [%4]\n" + "1: " TUSER(ldr) " %1, [%4]\n" " teq %1, %2\n" " it eq @ explicit IT needed for the 2b label\n" - "2: " T(streq) " %3, [%4]\n" + "2: " TUSER(streq) " %3, [%4]\n" __futex_atomic_ex_table("%5") : "+r" (ret), "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 1e5717afc4a..ae29293270a 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -71,12 +71,6 @@ extern void platform_secondary_init(unsigned int cpu); extern void platform_smp_prepare_cpus(unsigned int); /* - * Logical CPU mapping. - */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - -/* * Initial data for bringing up a secondary CPU. */ struct secondary_data { diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index f24c1b9e211..558d6c80aca 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void) } #endif +/* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + #endif diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index b293616a1a1..2958976d867 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -227,7 +227,7 @@ do { \ #define __get_user_asm_byte(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldrb) " %1,[%2],#0\n" \ + "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -263,7 +263,7 @@ do { \ #define __get_user_asm_word(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1,[%2],#0\n" \ + "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -308,7 +308,7 @@ do { \ #define __put_user_asm_byte(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(strb) " %1,[%2],#0\n" \ + "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -341,7 +341,7 @@ do { \ #define __put_user_asm_word(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(str) " %1,[%2],#0\n" \ + "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -366,10 +366,10 @@ do { \ #define __put_user_asm_dword(x,__pu_addr,err) \ __asm__ __volatile__( \ - ARM( "1: " T(str) " " __reg_oper1 ", [%1], #4\n" ) \ - ARM( "2: " T(str) " " __reg_oper0 ", [%1]\n" ) \ - THUMB( "1: " T(str) " " __reg_oper1 ", [%1]\n" ) \ - THUMB( "2: " T(str) " " __reg_oper0 ", [%1, #4]\n" ) \ + ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \ + ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \ + THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \ + THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 520889cf1b5..9fd0ba90c1d 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -149,6 +149,11 @@ ENDPROC(ret_from_fork) #endif #endif +.macro mcount_adjust_addr rd, rn + bic \rd, \rn, #1 @ clear the Thumb bit if present + sub \rd, \rd, #MCOUNT_INSN_SIZE +.endm + .macro __mcount suffix mcount_enter ldr r0, =ftrace_trace_function @@ -173,8 +178,7 @@ ENDPROC(ret_from_fork) mcount_exit 1: mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function adr lr, BSYM(2f) mov pc, r2 2: mcount_exit @@ -184,8 +188,7 @@ ENDPROC(ret_from_fork) mcount_enter mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function .globl ftrace_call\suffix ftrace_call\suffix: @@ -205,11 +208,11 @@ ftrace_graph_call\suffix: #ifdef CONFIG_DYNAMIC_FTRACE @ called from __ftrace_caller, saved in mcount_enter ldr r1, [sp, #16] @ instrumented routine (func) + mcount_adjust_addr r1, r1 #else @ called from __mcount, untouched in lr - mov r1, lr @ instrumented routine (func) + mcount_adjust_addr r1, lr @ instrumented routine (func) #endif - sub r1, r1, #MCOUNT_INSN_SIZE mov r2, fp @ frame pointer bl prepare_ftrace_return mcount_exit diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 129fbd55bde..a255c39612c 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,7 +21,6 @@ #include <linux/init.h> #include <linux/kexec.h> #include <linux/of_fdt.h> -#include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> @@ -160,7 +159,7 @@ static struct resource mem_res[] = { .flags = IORESOURCE_MEM }, { - .name = "Kernel text", + .name = "Kernel code", .start = 0, .end = 0, .flags = IORESOURCE_MEM @@ -427,6 +426,20 @@ void cpu_init(void) : "r14"); } +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + static void __init setup_processor(void) { struct proc_info_list *list; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 57db122a4f6..cdeb727527d 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -233,20 +233,6 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ -int __cpu_logical_map[NR_CPUS]; - -void __init smp_setup_processor_id(void) -{ - int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; - - cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) - cpu_logical_map(i) = i == cpu ? 0 : i; - - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); -} - /* * Called by both boot and secondaries to move global data into * per-processor storage. @@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); static void ipi_timer(void) { struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); - irq_enter(); evt->event_handler(evt); - irq_exit(); } #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST @@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs) switch (ipinr) { case IPI_TIMER: + irq_enter(); ipi_timer(); + irq_exit(); break; case IPI_RESCHEDULE: @@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs) break; case IPI_CALL_FUNC: + irq_enter(); generic_smp_call_function_interrupt(); + irq_exit(); break; case IPI_CALL_FUNC_SINGLE: + irq_enter(); generic_smp_call_function_single_interrupt(); + irq_exit(); break; case IPI_CPU_STOP: + irq_enter(); ipi_cpu_stop(cpu); + irq_exit(); break; default: diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index c8e938553d4..4285daa077b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) else twd_calibrate_rate(); + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index f76e7554867..1e19691e040 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -4,6 +4,7 @@ */ #include <asm-generic/vmlinux.lds.h> +#include <asm/cache.h> #include <asm/thread_info.h> #include <asm/memory.h> #include <asm/page.h> @@ -181,7 +182,7 @@ SECTIONS } #endif - PERCPU_SECTION(32) + PERCPU_SECTION(L1_CACHE_BYTES) #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ @@ -212,13 +213,13 @@ SECTIONS #endif NOSAVE_DATA - CACHELINE_ALIGNED_DATA(32) - READ_MOSTLY_DATA(32) + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) /* * The exception fixup table (might need resorting at runtime) */ - . = ALIGN(32); + . = ALIGN(4); __start___ex_table = .; #ifdef CONFIG_MMU *(__ex_table) diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1b049cd7a49..11093a7c3e3 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -31,18 +31,18 @@ #include <asm/domain.h> ENTRY(__get_user_1) -1: T(ldrb) r2, [r0] +1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) #ifdef CONFIG_THUMB2_KERNEL -2: T(ldrb) r2, [r0] -3: T(ldrb) r3, [r0, #1] +2: TUSER(ldrb) r2, [r0] +3: TUSER(ldrb) r3, [r0, #1] #else -2: T(ldrb) r2, [r0], #1 -3: T(ldrb) r3, [r0] +2: TUSER(ldrb) r2, [r0], #1 +3: TUSER(ldrb) r3, [r0] #endif #ifndef __ARMEB__ orr r2, r2, r3, lsl #8 @@ -54,7 +54,7 @@ ENTRY(__get_user_2) ENDPROC(__get_user_2) ENTRY(__get_user_4) -4: T(ldr) r2, [r0] +4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_4) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index c023fc11e86..7db25990c58 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -31,7 +31,7 @@ #include <asm/domain.h> ENTRY(__put_user_1) -1: T(strb) r2, [r0] +1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) @@ -40,19 +40,19 @@ ENTRY(__put_user_2) mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ -2: T(strb) r2, [r0] -3: T(strb) ip, [r0, #1] +2: TUSER(strb) r2, [r0] +3: TUSER(strb) ip, [r0, #1] #else -2: T(strb) ip, [r0] -3: T(strb) r2, [r0, #1] +2: TUSER(strb) ip, [r0] +3: TUSER(strb) r2, [r0, #1] #endif #else /* !CONFIG_THUMB2_KERNEL */ #ifndef __ARMEB__ -2: T(strb) r2, [r0], #1 -3: T(strb) ip, [r0] +2: TUSER(strb) r2, [r0], #1 +3: TUSER(strb) ip, [r0] #else -2: T(strb) ip, [r0], #1 -3: T(strb) r2, [r0] +2: TUSER(strb) ip, [r0], #1 +3: TUSER(strb) r2, [r0] #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 @@ -60,18 +60,18 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) -4: T(str) r2, [r0] +4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) #ifdef CONFIG_THUMB2_KERNEL -5: T(str) r2, [r0] -6: T(str) r3, [r0, #4] +5: TUSER(str) r2, [r0] +6: TUSER(str) r3, [r0, #4] #else -5: T(str) r2, [r0], #4 -6: T(str) r3, [r0] +5: TUSER(str) r2, [r0], #4 +6: TUSER(str) r3, [r0] #endif mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d0ece2aeb70..5c908b1cb8e 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -32,11 +32,11 @@ rsb ip, ip, #4 cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault sub r2, r2, ip b .Lc2u_dest_aligned @@ -59,7 +59,7 @@ ENTRY(__copy_to_user) addmi ip, r2, #4 bmi .Lc2u_0nowords ldr r3, [r1], #4 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -88,18 +88,18 @@ USER( T(str) r3, [r0], #4) @ May fault stmneia r0!, {r3 - r4} @ Shouldnt fault tst ip, #4 ldrne r3, [r1], #4 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_0fupi .Lc2u_0nowords: teq ip, #0 beq .Lc2u_finished .Lc2u_nowords: cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_not_enough: @@ -120,7 +120,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #8 ldr r7, [r1], #4 orr r3, r3, r7, push #24 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -155,18 +155,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #8 ldrne r7, [r1], #4 orrne r3, r3, r7, push #24 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_1fupi .Lc2u_1nowords: mov r3, r7, get_byte_1 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_2 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault movgt r3, r7, get_byte_3 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_2fupi: subs r2, r2, #4 @@ -175,7 +175,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #16 ldr r7, [r1], #4 orr r3, r3, r7, push #16 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -210,18 +210,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #16 ldrne r7, [r1], #4 orrne r3, r3, r7, push #16 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_2fupi .Lc2u_2nowords: mov r3, r7, get_byte_2 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_3 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_3fupi: subs r2, r2, #4 @@ -230,7 +230,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #24 ldr r7, [r1], #4 orr r3, r3, r7, push #8 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -265,18 +265,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #24 ldrne r7, [r1], #4 orrne r3, r3, r7, push #8 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_3fupi .Lc2u_3nowords: mov r3, r7, get_byte_3 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) @@ -295,11 +295,11 @@ ENDPROC(__copy_to_user) .Lcfu_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 sub r2, r2, ip b .Lcfu_dest_aligned @@ -322,7 +322,7 @@ ENTRY(__copy_from_user) .Lcfu_0fupi: subs r2, r2, #4 addmi ip, r2, #4 bmi .Lcfu_0nowords -USER( T(ldr) r3, [r1], #4) +USER( TUSER( ldr) r3, [r1], #4) str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 @@ -351,18 +351,18 @@ USER( T(ldr) r3, [r1], #4) ldmneia r1!, {r3 - r4} @ Shouldnt fault stmneia r0!, {r3 - r4} tst ip, #4 - T(ldrne) r3, [r1], #4 @ Shouldnt fault + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault strne r3, [r0], #4 ands ip, ip, #3 beq .Lcfu_0fupi .Lcfu_0nowords: teq ip, #0 beq .Lcfu_finished .Lcfu_nowords: cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -375,7 +375,7 @@ USER( T(ldrgtb) r3, [r1], #1) @ May fault .Lcfu_src_not_aligned: bic r1, r1, #3 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault cmp ip, #2 bgt .Lcfu_3fupi beq .Lcfu_2fupi @@ -383,7 +383,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_1nowords mov r3, r7, pull #8 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #24 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -418,7 +418,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #8 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #24 strne r3, [r0], #4 ands ip, ip, #3 @@ -438,7 +438,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_2nowords mov r3, r7, pull #16 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #16 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -474,7 +474,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #16 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #16 strne r3, [r0], #4 ands ip, ip, #3 @@ -486,7 +486,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault strb r3, [r0], #1 movge r3, r7, get_byte_3 strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #0) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -494,7 +494,7 @@ USER( T(ldrgtb) r3, [r1], #0) @ May fault addmi ip, r2, #4 bmi .Lcfu_3nowords mov r3, r7, pull #24 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #8 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -529,7 +529,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #24 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #8 strne r3, [r0], #4 ands ip, ip, #3 @@ -539,9 +539,9 @@ USER( T(ldrne) r7, [r1], #4) @ May fault beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished ENDPROC(__copy_from_user) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f991f29528..71feb00a1e9 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -18,6 +18,12 @@ config HAVE_AT91_USART4 config HAVE_AT91_USART5 bool +config AT91_SAM9_ALT_RESET + bool + +config AT91_SAM9G45_RESET + bool + menu "Atmel AT91 System-on-Chip" choice @@ -39,6 +45,7 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -46,6 +53,7 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -61,6 +70,7 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" @@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91CAP9 bool "AT91CAP9" @@ -96,6 +109,7 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 242174f9f35..705e1fbded3 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,15 +8,17 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o +obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o +obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index edb879ac04c..a42edc25a87 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -21,7 +21,6 @@ #include <mach/cpu.h> #include <mach/at91cap9.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include "soc.h" #include "generic.h" @@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; -static void at91cap9_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void) static void __init at91cap9_ioremap_registers(void) { at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91_ioremap_rstc(AT91CAP9_BASE_RSTC); at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); } static void __init at91cap9_initialize(void) { - arm_pm_restart = at91cap9_restart; + arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Register GPIO subsystem */ diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5e46e4a9643..d4036ba4361 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index b85b9ea6017..023c2ff138d 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 79e3669b111..75e876c258a 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index d3f931c5942..518e4237717 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -23,7 +23,8 @@ .globl at91sam9_alt_restart at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, .at91_va_base_rstc_cr + ldr r1, =at91_rstc_base + ldr r1, [r1] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -33,11 +34,9 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1] @ reset processor + str r4, [r1, #AT91_RSTC_CR] @ reset processor b . .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -.at91_va_base_rstc_cr: - .word AT91_VA_BASE_SYS + AT91_RSTC_CR diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 7032dd32cdf..1cb6a96b1c1 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,7 +18,6 @@ #include <asm/mach/map.h> #include <mach/at91sam9g45.h> #include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> #include <mach/cpu.h> #include "soc.h" @@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; -static void at91sam9g45_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ @@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S new file mode 100644 index 00000000000..0468be10980 --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -0,0 +1,40 @@ +/* + * reset AT91SAM9G45 as per errata + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcosoft.com> + * + * unless the SDRAM is cleanly shutdown before we hit the + * reset register it can be left driving the data bus and + * killing the chance of a subsequent boot from NAND + * + * GPLv2 Only + */ + +#include <linux/linkage.h> +#include <mach/hardware.h> +#include <mach/at91sam9_ddrsdr.h> +#include <mach/at91_rstc.h> + + .arm + + .globl at91sam9g45_restart + +at91sam9g45_restart: + ldr r0, .at91_va_base_sdramc0 @ preload constants + ldr r1, =at91_rstc_base + ldr r1, [r1] + + mov r2, #1 + mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN + ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST + + .balign 32 @ align to cache line + + str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access + str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 + str r4, [r1, #AT91_RSTC_CR] @ reset processor + + b . + +.at91_va_base_sdramc0: + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d6bcb1da11d..d2c91a841cb 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 4866b8180d6..594133451c0 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -58,7 +58,9 @@ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); /* reset */ +extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); +extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h index cbd2bf052c1..875fa336800 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/include/mach/at91_rstc.h @@ -16,13 +16,25 @@ #ifndef AT91_RSTC_H #define AT91_RSTC_H -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_rstc_base; + +#define at91_rstc_read(field) \ + __raw_readl(at91_rstc_base + field) + +#define at91_rstc_write(field, value) \ + __raw_writel(value, at91_rstc_base + field); +#else +.extern at91_rstc_base +#endif + +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ #define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ #define AT91_RSTC_RSTTYP_GENERAL (0 << 8) @@ -33,7 +45,7 @@ #define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ #define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 4c0e2f6011d..61d952902f2 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -83,7 +83,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (cpu_is_at91cap9_revB() ? \ (0xfffffd50 - AT91_BASE_SYS) : \ (0xfffffd60 - AT91_BASE_SYS)) @@ -96,6 +95,7 @@ #define AT91CAP9_BASE_PIOB 0xfffff400 #define AT91CAP9_BASE_PIOC 0xfffff600 #define AT91CAP9_BASE_PIOD 0xfffff800 +#define AT91CAP9_BASE_RSTC 0xfffffd00 #define AT91CAP9_BASE_SHDWC 0xfffffd10 #define AT91CAP9_BASE_RTT 0xfffffd20 #define AT91CAP9_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h deleted file mode 100644 index 976f4a6c335..00000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ /dev/null @@ -1,108 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - * - * (C) 2008 Andrew Victor - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 - -#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index f937c476bb6..fa5ca278ade 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -83,7 +83,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9260_BASE_ECC 0xffffe800 @@ -92,6 +91,7 @@ #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 #define AT91SAM9260_BASE_PIOC 0xfffff800 +#define AT91SAM9260_BASE_RSTC 0xfffffd00 #define AT91SAM9260_BASE_SHDWC 0xfffffd10 #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 175604e261b..7cde2d36570 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9261_BASE_SMC 0xffffec00 @@ -76,6 +75,7 @@ #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 #define AT91SAM9261_BASE_PIOC 0xfffff800 +#define AT91SAM9261_BASE_RSTC 0xfffffd00 #define AT91SAM9261_BASE_SHDWC 0xfffffd10 #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 80c915002d8..5949abda962 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -78,7 +78,6 @@ #define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9263_BASE_ECC0 0xffffe000 @@ -91,6 +90,7 @@ #define AT91SAM9263_BASE_PIOC 0xfffff600 #define AT91SAM9263_BASE_PIOD 0xfffff800 #define AT91SAM9263_BASE_PIOE 0xfffffa00 +#define AT91SAM9263_BASE_RSTC 0xfffffd00 #define AT91SAM9263_BASE_SHDWC 0xfffffd10 #define AT91SAM9263_BASE_RTT0 0xfffffd20 #define AT91SAM9263_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index d27b15ba8eb..e2f8da8ce5b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -46,10 +46,10 @@ #define AT91_DDRSDRC_CAS_25 (6 << 4) #define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ #define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ @@ -59,7 +59,8 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ #define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ @@ -68,13 +69,14 @@ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ #define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ #define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ #define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -92,32 +94,40 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ #define AT91_DDRSDRC_DBW_32BITS (0 << 4) #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ #define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ #define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ #define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ #define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index f0c23c960de..dd9c95ea086 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -90,7 +90,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9G45_BASE_ECC 0xffffe200 @@ -102,6 +101,7 @@ #define AT91SAM9G45_BASE_PIOC 0xfffff600 #define AT91SAM9G45_BASE_PIOD 0xfffff800 #define AT91SAM9G45_BASE_PIOE 0xfffffa00 +#define AT91SAM9G45_BASE_RSTC 0xfffffd00 #define AT91SAM9G45_BASE_SHDWC 0xfffffd10 #define AT91SAM9G45_BASE_RTT 0xfffffd20 #define AT91SAM9G45_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 2bb359e60b9..d7bead7118d 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -72,7 +72,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) @@ -84,6 +83,7 @@ #define AT91SAM9RL_BASE_PIOB 0xfffff600 #define AT91SAM9RL_BASE_PIOC 0xfffff800 #define AT91SAM9RL_BASE_PIOD 0xfffffa00 +#define AT91SAM9RL_BASE_RSTC 0xfffffd00 #define AT91SAM9RL_BASE_SHDWC 0xfffffd10 #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index d0b377b21bd..3b33f07b1e1 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data); struct at91_usbh_data { u8 ports; /* number of ports on root hub */ int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_inverted; + u8 vbus_pin_active_low[2]; u8 overcurrent_supported; int overcurrent_pin[2]; u8 overcurrent_status[2]; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 62ad95556c3..1606379ac28 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,7 +34,6 @@ /* * Show the reason for the previous system reset. */ -#if defined(AT91_RSTC) #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> @@ -58,10 +57,10 @@ static void __init show_reset_status(void) char *reason, *r2 = reset; u32 reset_type, wake_type; - if (!at91_shdwc_base) + if (!at91_shdwc_base || !at91_rstc_base) return; - reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; wake_type = at91_shdwc_read(AT91_SHDW_SR); switch (reset_type) { @@ -102,10 +101,6 @@ static void __init show_reset_status(void) } pr_info("AT91: Starting after %s %s\n", reason, r2); } -#else -static void __init show_reset_status(void) {} -#endif - static int at91_pm_valid_state(suspend_state_t state) { diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index ce9a2069911..7eb40d24242 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void) : : "r" (0)) #elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> +#include <mach/at91sam9_ddrsdr.h> static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) #define wait_for_interrupt_enable() cpu_do_idle() #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index f7922a43617..92dfb846139 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,9 +18,8 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include <mach/at91rm9200_mc.h> -#elif defined(CONFIG_ARCH_AT91CAP9) -#include <mach/at91cap9_ddrsdr.h> -#elif defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) #include <mach/at91sam9_ddrsdr.h> #else #include <mach/at91sam9_sdramc.h> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 8bdcc3cb601..69d3fc4c46f 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata); void __init at91rm9200_set_type(int type) { if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - else at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + + pr_info("AT91: filled in soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); } void __init at91_init_irq_default(void) @@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr) pm_power_off = at91sam9_poweroff; } +void __iomem *at91_rstc_base; + +void __init at91_ioremap_rstc(u32 base_addr) +{ + at91_rstc_base = ioremap(base_addr, 16); + if (!at91_rstc_base) + panic("Impossible to ioremap at91_rstc_base\n"); +} + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index da70e7e3993..dd1ad55524c 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <mach/regs-pmu.h> diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 683aec786b7..0f2035a1eb6 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -23,6 +23,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 7afbe1e55be..8394d512a40 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,6 +25,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/hardware/arm_timer.h> #include <asm/hardware/timer-sp.h> @@ -72,9 +73,7 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { -#ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); -#endif writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0e6de366c64..4defb97bbfc 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -22,6 +22,18 @@ config ARCH_MX25 config MACH_MX27 bool +config ARCH_MX5 + bool + +config ARCH_MX50 + bool + +config ARCH_MX51 + bool + +config ARCH_MX53 + bool + config SOC_IMX1 bool select ARCH_MX1 @@ -73,6 +85,31 @@ config SOC_IMX35 select MXC_AVIC select SMP_ON_UP if SMP +config SOC_IMX5 + select CPU_V7 + select MXC_TZIC + select ARCH_MXC_IOMUX_V3 + select ARCH_MXC_AUDMUX_V2 + select ARCH_HAS_CPUFREQ + select ARCH_MX5 + bool + +config SOC_IMX50 + bool + select SOC_IMX5 + select ARCH_MX50 + +config SOC_IMX51 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX51 + +config SOC_IMX53 + bool + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 if ARCH_IMX_V4_V5 @@ -592,6 +629,207 @@ config MACH_VPR200 Include support for VPR200 platform. This includes specific configurations for the board and its peripherals. +comment "i.MX5 platforms:" + +config MACH_MX50_RDP + bool "Support MX50 reference design platform" + depends on BROKEN + select SOC_IMX50 + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX50 reference design platform (RDP) board. This + includes specific configurations for the board and its peripherals. + +comment "i.MX51 machines:" + +config MACH_IMX51_DT + bool "Support i.MX51 platforms from device tree" + select SOC_IMX51 + select USE_OF + select MACH_MX51_BABBAGE + help + Include support for Freescale i.MX51 based platforms + using the device tree for discovery + +config MACH_MX51_BABBAGE + bool "Support MX51 BABBAGE platforms" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for MX51 Babbage platform, also known as MX51EVK in + u-boot. This includes specific configurations for the board and its + peripherals. + +config MACH_MX51_3DS + bool "Support MX51PDK (3DS)" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_DEBUG_BOARD + help + Include support for MX51PDK (3DS) platform. This includes specific + configurations for the board and its peripherals. + +config MACH_EUKREA_CPUIMX51 + bool "Support Eukrea CPUIMX51 module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51 platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51 + default MACH_EUKREA_MBIMX51_BASEBOARD + +config MACH_EUKREA_MBIMX51_BASEBOARD + prompt "Eukrea MBIMX51 development board" + bool + select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMX51 evaluation board. + +endchoice + +config MACH_EUKREA_CPUIMX51SD + bool "Support Eukrea CPUIMX51SD module" + select SOC_IMX51 + select IMX_HAVE_PLATFORM_FSL_USB2_UDC + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_SPI_IMX + help + Include support for Eukrea CPUIMX51SD platform. This includes + specific configurations for the module and its peripherals. + +choice + prompt "Baseboard" + depends on MACH_EUKREA_CPUIMX51SD + default MACH_EUKREA_MBIMXSD51_BASEBOARD + +config MACH_EUKREA_MBIMXSD51_BASEBOARD + prompt "Eukrea MBIMXSD development board" + bool + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER + help + This adds board specific devices that can be found on Eukrea's + MBIMXSD evaluation board. + +endchoice + +config MX51_EFIKA_COMMON + bool + select SOC_IMX51 + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_MXC_EHCI + select IMX_HAVE_PLATFORM_PATA_IMX + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select MXC_ULPI if USB_ULPI + +config MACH_MX51_EFIKAMX + bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika MX nettop. This includes specific + configurations for the board and its peripherals. + +config MACH_MX51_EFIKASB + bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER + select MX51_EFIKA_COMMON + help + Include support for Genesi Efika Smartbook. This includes specific + configurations for the board and its peripherals. + +comment "i.MX53 machines:" + +config MACH_IMX53_DT + bool "Support i.MX53 platforms from device tree" + select SOC_IMX53 + select USE_OF + select MACH_MX53_ARD + select MACH_MX53_EVK + select MACH_MX53_LOCO + select MACH_MX53_SMD + help + Include support for Freescale i.MX53 based platforms + using the device tree for discovery + +config MACH_MX53_EVK + bool "Support MX53 EVK platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER + help + Include support for MX53 EVK platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_SMD + bool "Support MX53 SMD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + help + Include support for MX53 SMD platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_LOCO + bool "Support MX53 LOCO platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER + help + Include support for MX53 LOCO platform. This includes specific + configurations for the board and its peripherals. + +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + comment "i.MX6 family:" config SOC_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index f5920c24f7d..55db9c488f2 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o + # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o endif + +# i.MX5 based machines +obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o +obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o +obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o +obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o +obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o +obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o +obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o +obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o +obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o +obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o +obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o +obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o + +obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o +obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 5f4d06af491..6dfdbcc83af 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000 params_phys-$(CONFIG_SOC_IMX35) := 0x80000100 initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000 +zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX50) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000 + +zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000 +params_phys-$(CONFIG_SOC_IMX51) := 0x90000100 +initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000 + +zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000 +params_phys-$(CONFIG_SOC_IMX53) := 0x70000100 +initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 + zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 9273c2a24b5..2d88f8b9a45 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg); DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg); DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg); +static unsigned long twd_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static struct clk twd_clk = { + .parent = &arm_clk, + .get_rate = twd_clk_get_rate, +}; + static unsigned long pll2_200m_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk), _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk), _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk), + _REGISTER_CLOCK("smp_twd", NULL, twd_clk), _REGISTER_CLOCK(NULL, "ckih", ckih_clk), _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk), _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk), diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c index 4cb27697719..08470504a08 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-imx/clock-mx51-mx53.c @@ -23,7 +23,7 @@ #include <mach/common.h> #include <mach/clock.h> -#include "crm_regs.h" +#include "crm-regs-imx5.h" /* External clock values passed-in by the board code */ static unsigned long external_high_reference, external_low_reference; diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c index 5e2e7a84386..5e2e7a84386 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-imx/cpu-imx5.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c index 9d34c3d4c02..9d34c3d4c02 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.c +++ b/arch/arm/mach-imx/cpu_op-mx51.c diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h index 97477fecb46..97477fecb46 100644 --- a/arch/arm/mach-mx5/cpu_op-mx51.h +++ b/arch/arm/mach-imx/cpu_op-mx51.h diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7daee..5e11ba7daee 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h index 7216667eaaf..7216667eaaf 100644 --- a/arch/arm/mach-mx5/devices-imx50.h +++ b/arch/arm/mach-imx/devices-imx50.h diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e22..af488bc0e22 100644 --- a/arch/arm/mach-mx5/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3..6e1e5d1f8c3 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h index 014aa985faa..014aa985faa 100644 --- a/arch/arm/mach-mx5/efika.h +++ b/arch/arm/mach-imx/efika.h diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728..c17fa131728 100644 --- a/arch/arm/mach-mx5/ehci.c +++ b/arch/arm/mach-imx/ehci-imx5.c diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c index a6a3ab8f1b1..a6a3ab8f1b1 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c index d817fc80b98..d817fc80b98 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index e6bad17b908..e6bad17b908 100644 --- a/arch/arm/mach-mx5/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index 05ebb3e6867..05ebb3e6867 100644 --- a/arch/arm/mach-mx5/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c index 944025da833..944025da833 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 9fbe923c8b0..9fbe923c8b0 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c index 42b66e8d961..42b66e8d961 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-imx/mach-mx50_rdp.c diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c index 83eab4176ca..83eab4176ca 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-imx/mach-mx51_3ds.c diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c index e4b822e9f71..e4b822e9f71 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-imx/mach-mx51_babbage.c diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c index 3a5ed2dd885..3a5ed2dd885 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-imx/mach-mx51_efikamx.c diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c index ea5f65b0381..ea5f65b0381 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-imx/mach-mx51_efikasb.c diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c index 5f224f1c3eb..753f4fc9ec0 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-imx/mach-mx53_ard.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) @@ -189,8 +188,10 @@ static int weim_cs_config(void) return -ENOMEM; iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) + if (!iomuxc_base) { + iounmap(weim_base); return -ENOMEM; + } /* CS1 timings for LAN9220 */ writel(0x20001, (weim_base + 0x18)); diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c index d6ce137896d..5a72188b9cd 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-imx/mach-mx53_evk.c @@ -37,7 +37,6 @@ #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) #define MX53EVK_LED IMX_GPIO_NR(7, 7) -#include "crm_regs.h" #include "devices-imx53.h" static iomux_v3_cfg_t mx53_evk_pads[] = { diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c index fd8b524e1c5..37f67cac15a 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-imx/mach-mx53_loco.c @@ -32,7 +32,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c index 22c53c9b18a..8e972c5c3e1 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-imx/mach-mx53_smd.c @@ -31,7 +31,6 @@ #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include "crm_regs.h" #include "devices-imx53.h" #define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c index bc17dfea381..bc17dfea381 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-imx/mm-imx5.c diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c index ec6ca91b299..ec6ca91b299 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-imx/mx51_efika.c diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c index 5eebfaad122..6dc09344805 100644 --- a/arch/arm/mach-mx5/system.c +++ b/arch/arm/mach-imx/pm-imx5.c @@ -1,8 +1,6 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: @@ -10,14 +8,22 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ -#include <linux/platform_device.h> +#include <linux/suspend.h> +#include <linux/clk.h> #include <linux/io.h> -#include <mach/hardware.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> #include <mach/common.h> -#include "crm_regs.h" +#include <mach/hardware.h> +#include "crm-regs-imx5.h" + +static struct clk *gpc_dvfs_clk; -/* set cpu low power mode before WFI instruction. This function is called - * mx5 because it can be used for mx50, mx51, and mx53.*/ +/* + * set cpu low power mode before WFI instruction. This function is called + * mx5 because it can be used for mx50, mx51, and mx53. + */ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) { u32 plat_lpc, arm_srpgcr, ccm_clpcr; @@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode) __raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR); } } + +static int mx5_suspend_prepare(void) +{ + return clk_enable(gpc_dvfs_clk); +} + +static int mx5_suspend_enter(suspend_state_t state) +{ + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + return 0; +} + +static void mx5_suspend_finish(void) +{ + clk_disable(gpc_dvfs_clk); +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .prepare = mx5_suspend_prepare, + .enter = mx5_suspend_enter, + .finish = mx5_suspend_finish, +}; + +static int __init mx5_pm_init(void) +{ + if (!cpu_is_mx51() && !cpu_is_mx53()) + return 0; + + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 29bd1243781..e15f1555c59 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -15,6 +15,7 @@ #include <linux/of.h> #include <linux/of_address.h> #include <linux/smp.h> +#include <asm/smp_plat.h> #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -24,10 +25,6 @@ static void __iomem *src_base; -#ifndef CONFIG_SMP -#define cpu_logical_map(cpu) 0 -#endif - void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 41c252de021..a446fc14221 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -11,6 +11,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 0b3e357c4c8..db0117ec55f 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -20,6 +20,7 @@ #include <asm/cacheflush.h> #include <asm/cputype.h> #include <asm/mach-types.h> +#include <asm/smp_plat.h> #include <mach/msm_iomap.h> diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig deleted file mode 100644 index af0c212e3c7..00000000000 --- a/arch/arm/mach-mx5/Kconfig +++ /dev/null @@ -1,244 +0,0 @@ -if ARCH_MX5 - -# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single -# image. So for most time, SOC_IMX50/51/53 should be used. - -config ARCH_MX51 - bool - -config ARCH_MX50 - bool - -config ARCH_MX53 - bool - -config SOC_IMX50 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX50 - -config SOC_IMX51 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MXC_AUDMUX_V2 - select ARCH_HAS_CPUFREQ - select ARCH_MX51 - -config SOC_IMX53 - bool - select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 - select MXC_TZIC - select ARCH_MXC_IOMUX_V3 - select ARCH_MX53 - -#comment "i.MX50 machines:" - -config MACH_MX50_RDP - bool "Support MX50 reference design platform" - depends on BROKEN - select SOC_IMX50 - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX50 reference design platform (RDP) board. This - includes specific configurations for the board and its peripherals. - -comment "i.MX51 machines:" - -config MACH_IMX51_DT - bool "Support i.MX51 platforms from device tree" - select SOC_IMX51 - select USE_OF - select MACH_MX51_BABBAGE - help - Include support for Freescale i.MX51 based platforms - using the device tree for discovery - -config MACH_MX51_BABBAGE - bool "Support MX51 BABBAGE platforms" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for MX51 Babbage platform, also known as MX51EVK in - u-boot. This includes specific configurations for the board and its - peripherals. - -config MACH_MX51_3DS - bool "Support MX51PDK (3DS)" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_DEBUG_BOARD - help - Include support for MX51PDK (3DS) platform. This includes specific - configurations for the board and its peripherals. - -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - -config MACH_EUKREA_CPUIMX51SD - bool "Support Eukrea CPUIMX51SD module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51SD platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51SD - default MACH_EUKREA_MBIMXSD51_BASEBOARD - -config MACH_EUKREA_MBIMXSD51_BASEBOARD - prompt "Eukrea MBIMXSD development board" - bool - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMXSD evaluation board. - -endchoice - -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI - -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select USE_OF - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile deleted file mode 100644 index 0fc60807fa2..00000000000 --- a/arch/arm/mach-mx5/Makefile +++ /dev/null @@ -1,26 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. -obj-y := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o - -obj-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o -obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o -obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o -obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o -obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o - -obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot deleted file mode 100644 index ca207ca305e..00000000000 --- a/arch/arm/mach-mx5/Makefile.boot +++ /dev/null @@ -1,9 +0,0 @@ - zreladdr-$(CONFIG_ARCH_MX50) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX50) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX50) := 0x70800000 - zreladdr-$(CONFIG_ARCH_MX51) += 0x90008000 -params_phys-$(CONFIG_ARCH_MX51) := 0x90000100 -initrd_phys-$(CONFIG_ARCH_MX51) := 0x90800000 - zreladdr-$(CONFIG_ARCH_MX53) += 0x70008000 -params_phys-$(CONFIG_ARCH_MX53) := 0x70000100 -initrd_phys-$(CONFIG_ARCH_MX53) := 0x70800000 diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c deleted file mode 100644 index 98052fc852c..00000000000 --- a/arch/arm/mach-mx5/pm-imx5.c +++ /dev/null @@ -1,83 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ -#include <linux/suspend.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/err.h> -#include <asm/cacheflush.h> -#include <asm/tlbflush.h> -#include <mach/common.h> -#include <mach/hardware.h> -#include "crm_regs.h" - -static struct clk *gpc_dvfs_clk; - -static int mx5_suspend_prepare(void) -{ - return clk_enable(gpc_dvfs_clk); -} - -static int mx5_suspend_enter(suspend_state_t state) -{ - switch (state) { - case PM_SUSPEND_MEM: - mx5_cpu_lp_set(STOP_POWER_OFF); - break; - case PM_SUSPEND_STANDBY: - mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); - break; - default: - return -EINVAL; - } - - if (state == PM_SUSPEND_MEM) { - local_flush_tlb_all(); - flush_cache_all(); - - /*clear the EMPGC0/1 bits */ - __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); - __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); - } - cpu_do_idle(); - return 0; -} - -static void mx5_suspend_finish(void) -{ - clk_disable(gpc_dvfs_clk); -} - -static int mx5_pm_valid(suspend_state_t state) -{ - return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); -} - -static const struct platform_suspend_ops mx5_suspend_ops = { - .valid = mx5_pm_valid, - .prepare = mx5_suspend_prepare, - .enter = mx5_suspend_enter, - .finish = mx5_suspend_finish, -}; - -static int __init mx5_pm_init(void) -{ - if (gpc_dvfs_clk == NULL) - gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); - - if (!IS_ERR(gpc_dvfs_clk)) { - if (cpu_is_mx51()) - suspend_set_ops(&mx5_suspend_ops); - } else - return -EPERM; - - return 0; -} -device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd..41e6612ecba 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -33,7 +33,6 @@ config ARCH_OMAP3 default y select CPU_V7 select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 18fd177073f..5bc13121eac 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,29 +415,9 @@ static struct resource pxa_rtc_resources[] = { }, }; -static struct resource sa1100_rtc_resources[] = { - [0] = { - .start = 0x40900000, - .end = 0x409000ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, - .num_resources = ARRAY_SIZE(sa1100_rtc_resources), - .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index adf058fa97e..91e4f6c0376 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,8 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 180bd8675d4..aed6cbcf386 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -230,8 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 0388eda7878..40bb16501d8 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,7 +89,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index d487e1ff4c9..8d614ecd8e9 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,7 +83,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f107c71c758..4f402afa660 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -67,7 +67,6 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index fccc644702e..d082a583df7 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -217,7 +217,6 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac1aed2a8da..eb55f05bef3 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 794a8d91a6a..124bce6b4d7 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -47,21 +47,23 @@ #define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else -#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif +#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K +#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) + +#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) +#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ + /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 7abf918b77e..aa2d4e02ea2 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -75,6 +75,8 @@ /* * Testchip peripheral and fpga gic regions */ +#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K #define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ #define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ #define REALVIEW_TC11MP_TWD_BASE 0x1F000600 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index e6296211776..9578145f2df 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -91,14 +91,9 @@ static struct map_desc realview_eb_io_desc[] __initdata = { static struct map_desc realview_eb11mp_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE), + .length = REALVIEW_EB11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 127a3fd42ab..2147335f66f 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -64,15 +64,10 @@ static struct map_desc realview_pb11mp_io_desc[] __initdata = { .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + }, { /* Maps the SCU, GIC CPU interface, TWD, GIC DIST */ + .virtual = IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE), + .length = REALVIEW_TC11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index ebafe8aa895..0c4b76ab4d8 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = { static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init assabet_init(void) @@ -253,17 +252,6 @@ static void __init assabet_init(void) sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); sa11x0_register_mcp(&assabet_mcp_data); } diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index d12d0f48b1d..11bb6d0b9be 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -124,23 +124,12 @@ static void __init cerf_map_io(void) static struct mcp_plat_data cerf_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&cerf_mcp_data); } diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index d6df9f6c9f7..dab3c6347a8 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,39 +11,17 @@ #include <linux/clk.h> #include <linux/spinlock.h> #include <linux/mutex.h> -#include <linux/io.h> -#include <linux/clkdev.h> #include <mach/hardware.h> -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*getrate)(struct clk *); -}; - +/* + * Very simple clock implementation - we only have one clock to deal with. + */ struct clk { - const struct clkops *ops; - unsigned long rate; unsigned int enabled; }; -#define INIT_CLKREG(_clk, _devname, _conname) \ - { \ - .clk = _clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -#define DEFINE_CLK(_name, _ops, _rate) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - .rate = _rate, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -static void clk_gpio27_enable(struct clk *clk) +static void clk_gpio27_enable(void) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -54,22 +32,38 @@ static void clk_gpio27_enable(struct clk *clk) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(void) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } +static struct clk clk_gpio27; + +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + const char *devname = dev_name(dev); + + return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + int clk_enable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk->ops->enable(clk); + clk_gpio27_enable(); spin_unlock_irqrestore(&clocks_lock, flags); - return 0; } EXPORT_SYMBOL(clk_enable); @@ -82,48 +76,13 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk->ops->disable(clk); + clk_gpio27_disable(); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - rate = clk->rate; - if (clk->ops->getrate) - rate = clk->ops->getrate(clk); - - return rate; + return 3686400; } EXPORT_SYMBOL(clk_get_rate); - -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; - -static void clk_dummy_enable(struct clk *clk) { } -static void clk_dummy_disable(struct clk *clk) { } - -const struct clkops clk_dummy_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, -}; - -static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400); -static DEFINE_CLK(dummy, &clk_dummy_ops, 0); - -static struct clk_lookup sa11xx_clkregs[] = { - INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -static int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); - return 0; -} - -postcore_initcall(sa11xx_clk_init); diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index c483912d08a..fd5652118ed 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -27,7 +27,6 @@ #include <linux/timer.h> #include <linux/gpio.h> #include <linux/pda_power.h> -#include <linux/mfd/ucb1x00.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; -static struct ucb1x00_plat_data collie_ucb1x00_data = { - .gpio_base = COLLIE_TC35143_GPIO_BASE, -}; - static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .codec = "ucb1x00", - .codec_pdata = &collie_ucb1x00_data, + .gpio_base = COLLIE_TC35143_GPIO_BASE, }; /* @@ -144,8 +138,6 @@ static struct pda_power_pdata collie_power_data = { static struct resource collie_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(COLLIE_GPIO_AC_IN), - .end = gpio_to_irq(COLLIE_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, @@ -347,7 +339,8 @@ static void __init collie_init(void) GPSR |= _COLLIE_GPIO_UCB1x00_RESET; - + collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); + collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); @@ -357,16 +350,6 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index aaa8acf76b7..19b2053f5af 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -228,7 +228,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver sa1100_driver = { +static struct cpufreq_driver sa1100_driver __refdata = { .flags = CPUFREQ_STICKY, .verify = sa11x0_verify_speed, .target = sa1100_target, diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e3a28ca2a7b..bb10ee2cb89 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = { static struct resource sa11x0mcp_resources[] = { [0] = { .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0x1C - 1, + .end = __PREG(Ser4MCCR0) + 0xffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = __PREG(Ser4MCCR1), - .end = __PREG(Ser4MCCR1) + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { .start = IRQ_Ser4MCP, .end = IRQ_Ser4MCP, .flags = IORESOURCE_IRQ, @@ -350,29 +345,9 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } -static struct resource sa11x0rtc_resources[] = { - [0] = { - .start = 0x90010000, - .end = 0x900100ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, - .resource = sa11x0rtc_resources, - .num_resources = ARRAY_SIZE(sa11x0rtc_resources), }; static struct platform_device *sa11x0_devices[] __initdata = { diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index 586cec898b3..ed1a331508a 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -17,8 +17,6 @@ struct mcp_plat_data { u32 mccr1; unsigned int sclk_rate; int gpio_base; - const char *codec; - void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index f50b00bd18a..b412fc09c80 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -198,3 +198,5 @@ static int __init jornada_ssp_init(void) { return platform_driver_register(&jornadassp_driver); } + +module_init(jornada_ssp_init); diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index d117ceab621..af4e2761f3d 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,20 +24,10 @@ static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init lart_init(void) { - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&lart_mcp_data); } diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 748d34435b3..318b2b766a0 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -55,22 +55,11 @@ static struct resource shannon_flash_resource = { static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init shannon_init(void) { sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&shannon_mcp_data); } diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 458ececefa5..e17c04d6e32 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -14,7 +14,6 @@ #include <linux/mtd/partitions.h> #include <linux/io.h> #include <linux/gpio.h> -#include <linux/mfd/ucb1x00.h> #include <asm/irq.h> #include <mach/hardware.h> @@ -188,15 +187,10 @@ static struct resource simpad_flash_resources [] = { } }; -static struct ucb1x00_plat_data simpad_ucb1x00_data = { - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, -}; - static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1300", - .codec_pdata = &simpad_ucb1x00_data, + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; @@ -384,16 +378,6 @@ static int __init simpad_init(void) sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&simpad_mcp_data); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index cc97ef892d1..4fe2e9eaf50 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -25,6 +25,7 @@ #include <linux/delay.h> #include <mach/common.h> #include <mach/r8a7779.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index be1ade76ccc..0d159d64a34 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,6 +23,7 @@ #include <linux/spinlock.h> #include <linux/io.h> #include <mach/common.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <asm/smp_twd.h> #include <asm/hardware/gic.h> diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index a3e0c8692f0..52af00446a6 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,6 +7,7 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 menu "Ux500 SoC" diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 23be34b3bb6..5dde4d4ebe8 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -261,6 +261,8 @@ void __init mop500_sdi_init(void) void __init snowball_sdi_init(void) { + /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ + mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 122ddde00ba..da5569d83d5 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -12,44 +12,6 @@ static void __iomem *l2x0_base; -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - cpu_relax(); -} - -static inline void ux500_cache_sync(void) -{ - writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); - ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - static int __init ux500_l2x0_unlock(void) { int i; @@ -85,9 +47,13 @@ static int __init ux500_l2x0_init(void) /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; + /* + * We can't disable l2 as we are in non secure mode, currently + * this seems be called only during kexec path. So let's + * override outer.disable with nasty assignment until we have + * some SMI service available. + */ + outer_cache.disable = NULL; return 0; } diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 572015e57cd..c76f0f456f0 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> extern volatile int pen_release; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a19e398dade..d2058ef8345 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -19,6 +19,7 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> +#include <asm/smp_plat.h> #include <asm/smp_scu.h> #include <mach/hardware.h> #include <mach/setup.h> diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 0a01cbdfe06..9f9e1c20306 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -95,13 +95,7 @@ static struct musb_hdrc_config musb_hdrc_config = { }; static struct musb_hdrc_platform_data musb_platform_data = { -#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, -#endif .config = &musb_hdrc_config, .board_data = &musb_board_data, }; diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 2b1e836a76e..b1e87c184e5 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -217,7 +217,7 @@ static void __init ct_ca9x4_init(void) } #ifdef CONFIG_SMP -static void ct_ca9x4_init_cpu_map(void) +static void __init ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); @@ -233,7 +233,7 @@ static void ct_ca9x4_init_cpu_map(void) set_smp_cross_call(gic_raise_softirq); } -static void ct_ca9x4_smp_enable(unsigned int max_cpus) +static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) { scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index 813ee08f96e..3034a4dab4a 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -13,6 +13,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/system.h> extern volatile int pen_release; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4cefb57d9ed..1a3ca248816 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -882,6 +882,7 @@ config CACHE_XSC3L2 config ARM_L1_CACHE_SHIFT_6 bool + default y if CPU_V7 help Setting ARM L1 cache line size to 64 Bytes. diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 6ec1226fc62..5dc7d127a40 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -310,7 +310,7 @@ static void arm_memory_present(void) static bool arm_memblock_steal_permitted = true; -phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align) +phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) { phys_addr_t phys; diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 80632e8d753..ba159370fa5 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -225,7 +225,8 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if ((area->flags & VM_ARM_MTYPE_MASK) != VM_ARM_MTYPE(mtype)) continue; if (__phys_to_pfn(area->phys_addr) > pfn || - __pfn_to_phys(pfn) + size-1 > area->phys_addr + area->size-1) + __pfn_to_phys(pfn) + offset + size-1 > + area->phys_addr + area->size-1) continue; /* we can drop the lock here as we know *area is static */ read_unlock(&vmlist_lock); diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7e9b5bf910c..0404ccbb8aa 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume) * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * - * We automatically detect if we have a Harvard cache, and use the - * Harvard cache control instructions insead of the unified cache - * control instructions. - * * This should be able to cover all ARMv7 cores. * * It is assumed that: @@ -251,9 +247,7 @@ __v7_setup: #endif 3: mov r10, #0 -#ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -#endif dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs @@ -330,16 +324,6 @@ __v7_ca5mp_proc_info: .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info /* - * ARM Ltd. Cortex A7 processor. - */ - .type __v7_ca7mp_proc_info, #object -__v7_ca7mp_proc_info: - .long 0x410fc070 - .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV - .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info - - /* * ARM Ltd. Cortex A9 processor. */ .type __v7_ca9mp_proc_info, #object @@ -351,6 +335,16 @@ __v7_ca9mp_proc_info: #endif /* CONFIG_ARM_LPAE */ /* + * ARM Ltd. Cortex A7 processor. + */ + .type __v7_ca7mp_proc_info, #object +__v7_ca7mp_proc_info: + .long 0x410fc070 + .long 0xff0ffff0 + __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info + + /* * ARM Ltd. Cortex A15 processor. */ .type __v7_ca15mp_proc_info, #object diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b30708e28c1..dcebb1230f7 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5 and ARMv5 SoCs config ARCH_IMX_V6_V7 - bool "i.MX3, i.MX6" + bool "i.MX3, i.MX5, i.MX6" select AUTO_ZRELADDR if !ZBOOT_ROM select ARM_PATCH_PHYS_VIRT select MIGHT_HAVE_CACHE_L2X0 help - This enables support for systems based on the Freescale i.MX3 and i.MX6 - family. - -config ARCH_MX5 - bool "i.MX50, i.MX51, i.MX53" - select AUTO_ZRELADDR if !ZBOOT_ROM - select ARM_PATCH_PHYS_VIRT - help - This enables support for machines using Freescale's i.MX50 and i.MX53 - processors. + This enables support for systems based on the Freescale i.MX3, i.MX5 + and i.MX6 family. endchoice source "arch/arm/mach-imx/Kconfig" -source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index 6fa8a707b9a..f7d18046c04 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -96,6 +96,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern int __init imx_iomuxv1_init(void __iomem *base, int numports); +extern int imx_iomuxv1_init(void __iomem *base, int numports); #endif /* __MACH_IOMUX_V1_H__ */ diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 92f18d372b6..49c7db48c7f 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -16,6 +16,7 @@ #include <linux/smp.h> #include <asm/cacheflush.h> +#include <asm/smp_plat.h> #include <asm/hardware/gic.h> /* diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 4203d101363..c4ac15c4f06 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -414,9 +414,9 @@ void __init config_atari(void) * FDC val = 4 -> Supervisor only */ asm volatile ("\n" " .chip 68030\n" - " pmove %0@,%/tt1\n" + " pmove %0,%/tt1\n" " .chip 68k" - : : "a" (&tt1_val)); + : : "m" (tt1_val)); } else { asm volatile ("\n" " .chip 68040\n" @@ -569,10 +569,10 @@ static void atari_reset(void) : "d0"); } else asm volatile ("\n" - " pmove %0@,%%tc\n" + " pmove %0,%%tc\n" " jmp %1@" : /* no outputs */ - : "a" (&tc_val), "a" (reset_addr)); + : "m" (tc_val), "a" (reset_addr)); } diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 0e89fa05de0..c1155f0e22c 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -50,19 +50,6 @@ #define IRQ_USER 8 -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - struct irq_data; struct irq_chip; struct irq_desc; diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c index 125f34e00bf..099283ee1a8 100644 --- a/arch/m68k/kernel/process_mm.c +++ b/arch/m68k/kernel/process_mm.c @@ -172,7 +172,7 @@ void flush_thread(void) current->thread.fs = __USER_DS; if (!FPU_IS_EMU) - asm volatile ("frestore %0@" : : "a" (&zero) : "memory"); + asm volatile("frestore %0": :"m" (zero)); } /* diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c index 69c1803fcf1..5e1078cabe0 100644 --- a/arch/m68k/kernel/process_no.c +++ b/arch/m68k/kernel/process_no.c @@ -163,8 +163,8 @@ void flush_thread(void) #ifdef CONFIG_FPU if (!FPU_IS_EMU) asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + "frestore %0\n\t" + ".chip 68k" : : "m" (zero)); #endif } diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index a76452ca964..daaa9187654 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -552,13 +552,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr), "d" (ssw)); #else asm volatile ("ptestr %2,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr), "d" (ssw)); #endif mmusr = temp; @@ -605,20 +605,18 @@ static inline void bus_error030 (struct frame *fp) !(ssw & RW) ? "write" : "read", addr, fp->ptregs.pc, ssw); asm volatile ("ptestr #1,%1@,#0\n\t" - "pmove %%psr,%0@" - : /* no outputs */ - : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) + : "a" (addr)); mmusr = temp; printk ("level 0 mmusr is %#x\n", mmusr); #if 0 - asm volatile ("pmove %%tt0,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt0,%0" + : "=m" (tlong)); printk("tt0 is %#lx, ", tlong); - asm volatile ("pmove %%tt1,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt1,%0" + : "=m" (tlong)); printk("tt1 is %#lx\n", tlong); #endif #ifdef DEBUG @@ -668,13 +666,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr #1,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr)); #else asm volatile ("ptestr #1,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr)); #endif mmusr = temp; diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index 95d0bf66e2e..3d84c1f2ffb 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -52,9 +52,9 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) unsigned long *descaddr; asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (descaddr) - : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg)); + "pmove %%psr,%1" + : "=a&" (descaddr), "=m" (mmusr) + : "a" (vaddr), "d" (get_fs().seg)); if (mmusr & (MMU_I|MMU_B|MMU_L)) return 0; descaddr = phys_to_virt((unsigned long)descaddr); diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi index 89af6263770..b37da56018b 100644 --- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi @@ -236,6 +236,10 @@ }; /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,mpc8536-esdhc", "fsl,esdhc"; + }; + /include/ "pq3-sec3.0-0.dtsi" /include/ "pq3-mpic.dtsi" /include/ "pq3-mpic-timer-B.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi index bd9e163c764..a97d1263372 100644 --- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi @@ -158,7 +158,8 @@ /include/ "pq3-usb2-dr-0.dtsi" /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { - fsl,sdhci-auto-cmd12; + compatible = "fsl,p1010-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; }; /include/ "pq3-sec4.4-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi index fc924c5ffeb..5de5fc35131 100644 --- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi @@ -145,6 +145,10 @@ /include/ "pq3-usb2-dr-1.dtsi" /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p1020-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; + }; /include/ "pq3-sec3.3-0.dtsi" /include/ "pq3-mpic.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi index 16239b199d0..ff9ed1d8792 100644 --- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi @@ -203,7 +203,8 @@ /include/ "pq3-esdhc-0.dtsi" sdhc@2e000 { - fsl,sdhci-auto-cmd12; + compatible = "fsl,p1022-esdhc", "fsl,esdhc"; + sdhci,auto-cmd12; }; /include/ "pq3-sec3.3-0.dtsi" diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi index c041050561a..332e9e75e6c 100644 --- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi +++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi @@ -182,6 +182,10 @@ /include/ "pq3-etsec1-1.dtsi" /include/ "pq3-etsec1-2.dtsi" /include/ "pq3-esdhc-0.dtsi" + sdhc@2e000 { + compatible = "fsl,p2020-esdhc", "fsl,esdhc"; + }; + /include/ "pq3-sec3.1-0.dtsi" /include/ "pq3-mpic.dtsi" /include/ "pq3-mpic-timer-B.dtsi" diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi index b5bd86f4baf..1fb7e0e0940 100644 --- a/arch/powerpc/boot/dts/p1020rdb.dtsi +++ b/arch/powerpc/boot/dts/p1020rdb.dtsi @@ -1,7 +1,7 @@ /* * P1020 RDB Device Tree Source stub (no addresses or top-level ranges) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -190,17 +190,16 @@ usb@22000 { phy_type = "ulpi"; + dr_mode = "host"; }; - /* USB2 is shared with localbus, so it must be disabled - by default. We can't put 'status = "disabled";' here - since U-Boot doesn't clear the status property when - it enables USB2. OTOH, U-Boot does create a new node - when there isn't any. So, just comment it out. + /* USB2 is shared with localbus. It is used + only in case of SPI and SD boot after + appropriate device-tree fixup done by uboot */ usb@23000 { phy_type = "ulpi"; + dr_mode = "host"; }; - */ mdio@24000 { phy0: ethernet-phy@0 { diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts index d9540791e43..97116f198a3 100644 --- a/arch/powerpc/boot/dts/p1021mds.dts +++ b/arch/powerpc/boot/dts/p1021mds.dts @@ -1,7 +1,7 @@ /* * P1021 MDS Device Tree Source * - * Copyright 2010 Freescale Semiconductor Inc. + * Copyright 2010,2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -151,6 +151,7 @@ usb@22000 { phy_type = "ulpi"; + dr_mode = "host"; }; mdio@24000 { diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi index c1cf6cef4dd..d3b939c573b 100644 --- a/arch/powerpc/boot/dts/p2020ds.dtsi +++ b/arch/powerpc/boot/dts/p2020ds.dtsi @@ -1,7 +1,7 @@ /* * P2020DS Device Tree Source stub (no addresses or top-level ranges) * - * Copyright 2011 Freescale Semiconductor Inc. + * Copyright 2011-2012 Freescale Semiconductor Inc. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: @@ -134,6 +134,7 @@ &board_soc { usb@22000 { phy_type = "ulpi"; + dr_mode = "host"; }; mdio@24520 { diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts index 26759a59171..eb8a6aa2bda 100644 --- a/arch/powerpc/boot/dts/p2020rdb.dts +++ b/arch/powerpc/boot/dts/p2020rdb.dts @@ -1,7 +1,7 @@ /* * P2020 RDB Device Tree Source * - * Copyright 2009-2011 Freescale Semiconductor Inc. + * Copyright 2009-2012 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -197,6 +197,7 @@ usb@22000 { phy_type = "ulpi"; + dr_mode = "host"; }; mdio@24520 { diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c index 28be3452e67..abef75176c0 100644 --- a/arch/powerpc/kernel/crash.c +++ b/arch/powerpc/kernel/crash.c @@ -46,7 +46,6 @@ /* This keeps a track of which one is the crashing cpu. */ int crashing_cpu = -1; -static atomic_t cpus_in_crash; static int time_to_dump; #define CRASH_HANDLER_MAX 3 @@ -66,6 +65,7 @@ static int handle_fault(struct pt_regs *regs) #ifdef CONFIG_SMP +static atomic_t cpus_in_crash; void crash_ipi_callback(struct pt_regs *regs) { static cpumask_t cpus_state_saved = CPU_MASK_NONE; diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 3fea3689527..bedd12e1cfb 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -442,8 +442,10 @@ static void __init fixup_port_irq(int index, port->irq = virq; +#ifdef CONFIG_SERIAL_8250_FSL if (of_device_is_compatible(np, "fsl,ns16550")) port->handle_irq = fsl8250_handle_irq; +#endif } static void __init fixup_port_pio(int index, diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c index bb3d84f4046..b0984ada3f8 100644 --- a/arch/powerpc/platforms/85xx/p1022_ds.c +++ b/arch/powerpc/platforms/85xx/p1022_ds.c @@ -25,6 +25,7 @@ #include <sysdev/fsl_soc.h> #include <sysdev/fsl_pci.h> +#include <asm/udbg.h> #include <asm/fsl_guts.h> #include "smp.h" diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c index f31162cfdaa..5e155dfc432 100644 --- a/arch/powerpc/platforms/powernv/pci-ioda.c +++ b/arch/powerpc/platforms/powernv/pci-ioda.c @@ -204,11 +204,10 @@ static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus, pr_devel(" -> OBR %s [%x] +%016llx\n", bus->self ? pci_name(bus->self) : "root", flags, offset); - for (i = 0; i < 2; i++) { - r = bus->resource[i]; + pci_bus_for_each_resource(bus, r, i) { if (r && (r->flags & flags)) { - bus->resource[i]->start += offset; - bus->resource[i]->end += offset; + r->start += offset; + r->end += offset; } } list_for_each_entry(dev, &bus->devices, bus_list) @@ -288,12 +287,17 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags, * assignment algorithm is going to be uber-trivial for now, we * can try to be smarter later at filling out holes. */ - start = bus->self ? 0 : bus->resource[bres]->start; - - /* Don't hand out IO 0 */ - if ((flags & IORESOURCE_IO) && !bus->self) - start += 0x1000; - + if (bus->self) { + /* No offset for downstream bridges */ + start = 0; + } else { + /* Offset from the root */ + if (flags & IORESOURCE_IO) + /* Don't hand out IO 0 */ + start = hose->io_resource.start + 0x1000; + else + start = hose->mem_resources[0].start; + } while(!list_empty(&head)) { w = list_first_entry(&head, struct resource_wrap, link); list_del(&w->link); @@ -321,13 +325,20 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags, empty: /* Only setup P2P's, not the PHB itself */ if (bus->self) { - WARN_ON(bus->resource[bres] == NULL); - bus->resource[bres]->start = 0; - bus->resource[bres]->flags = (*size) ? flags : 0; - bus->resource[bres]->end = (*size) ? (*size - 1) : 0; + struct resource *res = bus->resource[bres]; + + if (WARN_ON(res == NULL)) + return; - /* Clear prefetch bus resources for now */ - bus->resource[2]->flags = 0; + /* + * FIXME: We should probably export and call + * pci_bridge_check_ranges() to properly re-initialize + * the PCI portion of the flags here, and to detect + * what the bridge actually supports. + */ + res->start = 0; + res->flags = (*size) ? flags : 0; + res->end = (*size) ? (*size - 1) : 0; } pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n", diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig index ae7b6d41fed..31f22c1f657 100644 --- a/arch/powerpc/platforms/pseries/Kconfig +++ b/arch/powerpc/platforms/pseries/Kconfig @@ -122,7 +122,7 @@ config DTL Say N if you are unsure. config PSERIES_IDLE - tristate "Cpuidle driver for pSeries platforms" + bool "Cpuidle driver for pSeries platforms" depends on CPU_IDLE depends on PPC_PSERIES default y diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c index 3b61e8cf342..30eb17ecad4 100644 --- a/arch/powerpc/sysdev/fsl_pci.c +++ b/arch/powerpc/sysdev/fsl_pci.c @@ -205,12 +205,12 @@ static void __init setup_pci_atmu(struct pci_controller *hose, if (paddr_hi == paddr_lo) { pr_err("%s: No outbound window space\n", name); - return ; + goto out; } if (paddr_lo == 0) { pr_err("%s: No space for inbound window\n", name); - return ; + goto out; } /* setup PCSRBAR/PEXCSRBAR */ @@ -357,6 +357,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose, (u64)hose->dma_window_size); } +out: iounmap(pci); } diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h index cf4e47b0948..3f30dac804e 100644 --- a/arch/s390/include/asm/kexec.h +++ b/arch/s390/include/asm/kexec.h @@ -42,6 +42,24 @@ /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_S390 +/* + * Size for s390x ELF notes per CPU + * + * Seven notes plus zero note at the end: prstatus, fpregset, timer, + * tod_cmp, tod_reg, control regs, and prefix + */ +#define KEXEC_NOTE_BYTES \ + (ALIGN(sizeof(struct elf_note), 4) * 8 + \ + ALIGN(sizeof("CORE"), 4) * 7 + \ + ALIGN(sizeof(struct elf_prstatus), 4) + \ + ALIGN(sizeof(elf_fpregset_t), 4) + \ + ALIGN(sizeof(u64), 4) + \ + ALIGN(sizeof(u64), 4) + \ + ALIGN(sizeof(u32), 4) + \ + ALIGN(sizeof(u64) * 16, 4) + \ + ALIGN(sizeof(u32), 4) \ + ) + /* Provide a dummy definition to avoid build failures. */ static inline void crash_setup_regs(struct pt_regs *newregs, struct pt_regs *oldregs) { } diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S index 577abba3fac..83bb96079c4 100644 --- a/arch/score/kernel/entry.S +++ b/arch/score/kernel/entry.S @@ -408,7 +408,7 @@ ENTRY(handle_sys) sw r9, [r0, PT_EPC] cmpi.c r27, __NR_syscalls # check syscall number - bgtu illegal_syscall + bgeu illegal_syscall slli r8, r27, 2 # get syscall routine la r11, sys_call_table diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 422c16dad1f..e61165161dd 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -399,6 +399,9 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) timers_global = (void __iomem *) (unsigned long) addr[num_cpu_timers]; + /* Every per-cpu timer works in timer mode */ + sbus_writel(0x00000000, &timers_global->timer_config); + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); master_l10_counter = &timers_global->l10_count; diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 864cc6e6ac8..5bed94e189f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -360,7 +360,6 @@ config X86_NUMACHIP depends on NUMA depends on SMP depends on X86_X2APIC - depends on !EDAC_AMD64 ---help--- Adds support for Numascale NumaChip large-SMP systems. Needed to enable more than ~168 cores. diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 3a19d04cebe..7116dcba0c9 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -321,6 +321,8 @@ static void parse_elf(void *output) default: /* Ignore other PT_* */ break; } } + + free(phdrs); } asmlinkage void decompress_kernel(void *rmode, memptr heap, diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 17c5d4bdee5..8d67d428b0f 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -159,6 +159,7 @@ #define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */ #define X86_FEATURE_LWP (6*32+15) /* Light Weight Profiling */ #define X86_FEATURE_FMA4 (6*32+16) /* 4 operands MAC instructions */ +#define X86_FEATURE_TCE (6*32+17) /* translation cache extension */ #define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */ #define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */ #define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */ diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 54a13aaebc4..21f7385badb 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -318,13 +318,13 @@ uv_gpa_in_mmr_space(unsigned long gpa) /* UV global physical address --> socket phys RAM */ static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa) { - unsigned long paddr = gpa & uv_hub_info->gpa_mask; + unsigned long paddr; unsigned long remap_base = uv_hub_info->lowmem_remap_base; unsigned long remap_top = uv_hub_info->lowmem_remap_top; gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) | ((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val); - gpa = gpa & uv_hub_info->gpa_mask; + paddr = gpa & uv_hub_info->gpa_mask; if (paddr >= remap_base && paddr < remap_base + remap_top) paddr -= remap_base; return paddr; diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index fe86493f3ed..ac0417be913 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -311,13 +311,33 @@ out: return state; } +/* + * AMD microcode firmware naming convention, up to family 15h they are in + * the legacy file: + * + * amd-ucode/microcode_amd.bin + * + * This legacy file is always smaller than 2K in size. + * + * Starting at family 15h they are in family specific firmware files: + * + * amd-ucode/microcode_amd_fam15h.bin + * amd-ucode/microcode_amd_fam16h.bin + * ... + * + * These might be larger than 2K. + */ static enum ucode_state request_microcode_amd(int cpu, struct device *device) { - const char *fw_name = "amd-ucode/microcode_amd.bin"; + char fw_name[36] = "amd-ucode/microcode_amd.bin"; const struct firmware *fw; enum ucode_state ret = UCODE_NFOUND; + struct cpuinfo_x86 *c = &cpu_data(cpu); + + if (c->x86 >= 0x15) + snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); - if (request_firmware(&fw, fw_name, device)) { + if (request_firmware(&fw, (const char *)fw_name, device)) { pr_err("failed to load file %s\n", fw_name); goto out; } diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c index 7b65f752c5f..7c1b765ecc5 100644 --- a/arch/x86/net/bpf_jit_comp.c +++ b/arch/x86/net/bpf_jit_comp.c @@ -151,17 +151,18 @@ void bpf_jit_compile(struct sk_filter *fp) cleanup_addr = proglen; /* epilogue address */ for (pass = 0; pass < 10; pass++) { + u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen; /* no prologue/epilogue for trivial filters (RET something) */ proglen = 0; prog = temp; - if (seen) { + if (seen_or_pass0) { EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */ EMIT4(0x48, 0x83, 0xec, 96); /* subq $96,%rsp */ /* note : must save %rbx in case bpf_error is hit */ - if (seen & (SEEN_XREG | SEEN_DATAREF)) + if (seen_or_pass0 & (SEEN_XREG | SEEN_DATAREF)) EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */ - if (seen & SEEN_XREG) + if (seen_or_pass0 & SEEN_XREG) CLEAR_X(); /* make sure we dont leek kernel memory */ /* @@ -170,7 +171,7 @@ void bpf_jit_compile(struct sk_filter *fp) * r9 = skb->len - skb->data_len * r8 = skb->data */ - if (seen & SEEN_DATAREF) { + if (seen_or_pass0 & SEEN_DATAREF) { if (offsetof(struct sk_buff, len) <= 127) /* mov off8(%rdi),%r9d */ EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len)); @@ -260,9 +261,14 @@ void bpf_jit_compile(struct sk_filter *fp) case BPF_S_ALU_DIV_X: /* A /= X; */ seen |= SEEN_XREG; EMIT2(0x85, 0xdb); /* test %ebx,%ebx */ - if (pc_ret0 != -1) - EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4)); - else { + if (pc_ret0 > 0) { + /* addrs[pc_ret0 - 1] is start address of target + * (addrs[i] - 4) is the address following this jmp + * ("xor %edx,%edx; div %ebx" being 4 bytes long) + */ + EMIT_COND_JMP(X86_JE, addrs[pc_ret0 - 1] - + (addrs[i] - 4)); + } else { EMIT_COND_JMP(X86_JNE, 2 + 5); CLEAR_A(); EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */ @@ -335,12 +341,12 @@ void bpf_jit_compile(struct sk_filter *fp) } /* fallinto */ case BPF_S_RET_A: - if (seen) { + if (seen_or_pass0) { if (i != flen - 1) { EMIT_JMP(cleanup_addr - addrs[i]); break; } - if (seen & SEEN_XREG) + if (seen_or_pass0 & SEEN_XREG) EMIT4(0x48, 0x8b, 0x5d, 0xf8); /* mov -8(%rbp),%rbx */ EMIT1(0xc9); /* leaveq */ } @@ -483,8 +489,9 @@ common_load: seen |= SEEN_DATAREF; goto common_load; case BPF_S_LDX_B_MSH: if ((int)K < 0) { - if (pc_ret0 != -1) { - EMIT_JMP(addrs[pc_ret0] - addrs[i]); + if (pc_ret0 > 0) { + /* addrs[pc_ret0 - 1] is the start address */ + EMIT_JMP(addrs[pc_ret0 - 1] - addrs[i]); break; } CLEAR_A(); @@ -599,13 +606,14 @@ cond_branch: f_offset = addrs[i + filter[i].jf] - addrs[i]; * use it to give the cleanup instruction(s) addr */ cleanup_addr = proglen - 1; /* ret */ - if (seen) + if (seen_or_pass0) cleanup_addr -= 1; /* leaveq */ - if (seen & SEEN_XREG) + if (seen_or_pass0 & SEEN_XREG) cleanup_addr -= 4; /* mov -8(%rbp),%rbx */ if (image) { - WARN_ON(proglen != oldproglen); + if (proglen != oldproglen) + pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n", proglen, oldproglen); break; } if (proglen == oldproglen) { diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 9be4cff00a2..3ae0e61abd2 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1851,6 +1851,8 @@ static void __init init_per_cpu_tunables(void) bcp->cong_reps = congested_reps; bcp->cong_period = congested_period; bcp->clocks_per_100_usec = usec_2_cycles(100); + spin_lock_init(&bcp->queue_lock); + spin_lock_init(&bcp->uvhub_lock); } } diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index 374a05d8ad2..f25c2765a5c 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -25,7 +25,7 @@ struct uv_irq_2_mmr_pnode{ int irq; }; -static spinlock_t uv_irq_lock; +static DEFINE_SPINLOCK(uv_irq_lock); static struct rb_root uv_irq_root; static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool); diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index cc9b1e182fc..d69cc6c3f80 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -116,9 +116,26 @@ static inline void spin_time_accum_blocked(u64 start) } #endif /* CONFIG_XEN_DEBUG_FS */ +/* + * Size struct xen_spinlock so it's the same as arch_spinlock_t. + */ +#if NR_CPUS < 256 +typedef u8 xen_spinners_t; +# define inc_spinners(xl) \ + asm(LOCK_PREFIX " incb %0" : "+m" ((xl)->spinners) : : "memory"); +# define dec_spinners(xl) \ + asm(LOCK_PREFIX " decb %0" : "+m" ((xl)->spinners) : : "memory"); +#else +typedef u16 xen_spinners_t; +# define inc_spinners(xl) \ + asm(LOCK_PREFIX " incw %0" : "+m" ((xl)->spinners) : : "memory"); +# define dec_spinners(xl) \ + asm(LOCK_PREFIX " decw %0" : "+m" ((xl)->spinners) : : "memory"); +#endif + struct xen_spinlock { unsigned char lock; /* 0 -> free; 1 -> locked */ - unsigned short spinners; /* count of waiting cpus */ + xen_spinners_t spinners; /* count of waiting cpus */ }; static int xen_spin_is_locked(struct arch_spinlock *lock) @@ -164,8 +181,7 @@ static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl) wmb(); /* set lock of interest before count */ - asm(LOCK_PREFIX " incw %0" - : "+m" (xl->spinners) : : "memory"); + inc_spinners(xl); return prev; } @@ -176,8 +192,7 @@ static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl) */ static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev) { - asm(LOCK_PREFIX " decw %0" - : "+m" (xl->spinners) : : "memory"); + dec_spinners(xl); wmb(); /* decrement count before restoring lock */ __this_cpu_write(lock_spinners, prev); } @@ -373,6 +388,8 @@ void xen_uninit_lock_cpu(int cpu) void __init xen_init_spinlocks(void) { + BUILD_BUG_ON(sizeof(struct xen_spinlock) > sizeof(arch_spinlock_t)); + pv_lock_ops.spin_is_locked = xen_spin_is_locked; pv_lock_ops.spin_is_contended = xen_spin_is_contended; pv_lock_ops.spin_lock = xen_spin_lock; |