diff options
Diffstat (limited to 'arch')
519 files changed, 7187 insertions, 6585 deletions
diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index 8b02420f732..e9762a33b04 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -6,40 +6,13 @@ */ #include <linux/module.h> -#include <linux/string.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/socket.h> -#include <linux/syscalls.h> -#include <linux/in.h> -#include <linux/in6.h> -#include <linux/pci.h> -#include <linux/screen_info.h> -#include <linux/tty.h> -#include <linux/mm.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> - -#include <asm/io.h> #include <asm/console.h> -#include <asm/hwrpb.h> #include <asm/uaccess.h> -#include <asm/processor.h> #include <asm/checksum.h> -#include <linux/interrupt.h> #include <asm/fpu.h> -#include <asm/irq.h> #include <asm/machvec.h> -#include <asm/pgalloc.h> -#include <asm/semaphore.h> -#include <asm/tlbflush.h> -#include <asm/cacheflush.h> -#include <asm/vga.h> -#include <asm/unistd.h> - -extern struct hwrpb_struct *hwrpb; -extern spinlock_t rtc_lock; +#include <linux/syscalls.h> /* these are C runtime functions with special calling conventions: */ extern void __divl (void); @@ -52,14 +25,9 @@ extern void __divqu (void); extern void __remqu (void); EXPORT_SYMBOL(alpha_mv); -EXPORT_SYMBOL(screen_info); -EXPORT_SYMBOL(perf_irq); EXPORT_SYMBOL(callback_getenv); EXPORT_SYMBOL(callback_setenv); EXPORT_SYMBOL(callback_save_env); -#ifdef CONFIG_ALPHA_GENERIC -EXPORT_SYMBOL(alpha_using_srm); -#endif /* CONFIG_ALPHA_GENERIC */ /* platform dependent support */ EXPORT_SYMBOL(strcat); @@ -77,47 +45,14 @@ EXPORT_SYMBOL(__constant_c_memset); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(clear_page); -EXPORT_SYMBOL(__direct_map_base); -EXPORT_SYMBOL(__direct_map_size); - -#ifdef CONFIG_PCI -EXPORT_SYMBOL(pci_alloc_consistent); -EXPORT_SYMBOL(pci_free_consistent); -EXPORT_SYMBOL(pci_map_single); -EXPORT_SYMBOL(pci_map_page); -EXPORT_SYMBOL(pci_unmap_single); -EXPORT_SYMBOL(pci_unmap_page); -EXPORT_SYMBOL(pci_map_sg); -EXPORT_SYMBOL(pci_unmap_sg); -EXPORT_SYMBOL(pci_dma_supported); -EXPORT_SYMBOL(pci_dac_dma_supported); -EXPORT_SYMBOL(pci_dac_page_to_dma); -EXPORT_SYMBOL(pci_dac_dma_to_page); -EXPORT_SYMBOL(pci_dac_dma_to_offset); -EXPORT_SYMBOL(alpha_gendev_to_pci); -#endif -EXPORT_SYMBOL(dma_set_mask); - -EXPORT_SYMBOL(dump_thread); -EXPORT_SYMBOL(dump_elf_thread); -EXPORT_SYMBOL(dump_elf_task); -EXPORT_SYMBOL(dump_elf_task_fp); -EXPORT_SYMBOL(hwrpb); -EXPORT_SYMBOL(start_thread); EXPORT_SYMBOL(alpha_read_fp_reg); EXPORT_SYMBOL(alpha_read_fp_reg_s); EXPORT_SYMBOL(alpha_write_fp_reg); EXPORT_SYMBOL(alpha_write_fp_reg_s); -/* In-kernel system calls. */ +/* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(sys_dup); -EXPORT_SYMBOL(sys_exit); -EXPORT_SYMBOL(sys_write); -EXPORT_SYMBOL(sys_lseek); EXPORT_SYMBOL(kernel_execve); -EXPORT_SYMBOL(sys_setsid); -EXPORT_SYMBOL(sys_wait4); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -134,10 +69,6 @@ EXPORT_SYMBOL(alpha_fp_emul_imprecise); EXPORT_SYMBOL(alpha_fp_emul); #endif -#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK -EXPORT_SYMBOL(__min_ipl); -#endif - /* * The following are specially called from the uaccess assembly stubs. */ @@ -160,27 +91,10 @@ EXPORT_SYMBOL(up); */ #ifdef CONFIG_SMP -EXPORT_SYMBOL(flush_tlb_mm); -EXPORT_SYMBOL(flush_tlb_range); -EXPORT_SYMBOL(flush_tlb_page); -EXPORT_SYMBOL(smp_imb); -EXPORT_SYMBOL(cpu_data); -EXPORT_SYMBOL(smp_num_cpus); -EXPORT_SYMBOL(smp_call_function); -EXPORT_SYMBOL(smp_call_function_on_cpu); EXPORT_SYMBOL(_atomic_dec_and_lock); #endif /* CONFIG_SMP */ /* - * NUMA specific symbols - */ -#ifdef CONFIG_DISCONTIGMEM -EXPORT_SYMBOL(node_data); -#endif /* CONFIG_DISCONTIGMEM */ - -EXPORT_SYMBOL(rtc_lock); - -/* * The following are special because they're not called * explicitly (the C compiler or assembler generates them in * response to division operations). Fortunately, their @@ -200,8 +114,3 @@ EXPORT_SYMBOL(__remqu); EXPORT_SYMBOL(memcpy); EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memchr); - -#ifdef CONFIG_ALPHA_IRONGATE -EXPORT_SYMBOL(irongate_ioremap); -EXPORT_SYMBOL(irongate_iounmap); -#endif diff --git a/arch/alpha/kernel/core_irongate.c b/arch/alpha/kernel/core_irongate.c index 138d497d1cc..e4a0bcf1d28 100644 --- a/arch/alpha/kernel/core_irongate.c +++ b/arch/alpha/kernel/core_irongate.c @@ -404,6 +404,7 @@ irongate_ioremap(unsigned long addr, unsigned long size) #endif return (void __iomem *)vaddr; } +EXPORT_SYMBOL(irongate_ioremap); void irongate_iounmap(volatile void __iomem *xaddr) @@ -414,3 +415,4 @@ irongate_iounmap(volatile void __iomem *xaddr) if (addr) return vfree((void *)(PAGE_MASK & addr)); } +EXPORT_SYMBOL(irongate_iounmap); diff --git a/arch/alpha/kernel/irq_alpha.c b/arch/alpha/kernel/irq_alpha.c index 6dd126b8be8..e16aeb6e79e 100644 --- a/arch/alpha/kernel/irq_alpha.c +++ b/arch/alpha/kernel/irq_alpha.c @@ -6,6 +6,7 @@ #include <linux/sched.h> #include <linux/irq.h> #include <linux/kernel_stat.h> +#include <linux/module.h> #include <asm/machvec.h> #include <asm/dma.h> @@ -16,6 +17,7 @@ /* Hack minimum IPL during interrupt processing for broken hardware. */ #ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK int __min_ipl; +EXPORT_SYMBOL(__min_ipl); #endif /* @@ -30,6 +32,7 @@ dummy_perf(unsigned long vector, struct pt_regs *regs) } void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf; +EXPORT_SYMBOL(perf_irq); /* * The main interrupt entry point. diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index fff5cf93e81..174b729c504 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -201,6 +201,7 @@ dma_set_mask(struct device *dev, u64 mask) return 0; } +EXPORT_SYMBOL(dma_set_mask); void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) { diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index c468e312e5f..6e7d1fe6e93 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -300,6 +300,7 @@ pci_map_single(struct pci_dev *pdev, void *cpu_addr, size_t size, int dir) dac_allowed = pdev ? pci_dac_dma_supported(pdev, pdev->dma_mask) : 0; return pci_map_single_1(pdev, cpu_addr, size, dac_allowed); } +EXPORT_SYMBOL(pci_map_single); dma_addr_t pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset, @@ -314,6 +315,7 @@ pci_map_page(struct pci_dev *pdev, struct page *page, unsigned long offset, return pci_map_single_1(pdev, (char *)page_address(page) + offset, size, dac_allowed); } +EXPORT_SYMBOL(pci_map_page); /* Unmap a single streaming mode DMA translation. The DMA_ADDR and SIZE must match what was provided for in a previous pci_map_single @@ -379,6 +381,7 @@ pci_unmap_single(struct pci_dev *pdev, dma_addr_t dma_addr, size_t size, DBGA2("pci_unmap_single: sg [%lx,%lx] np %ld from %p\n", dma_addr, size, npages, __builtin_return_address(0)); } +EXPORT_SYMBOL(pci_unmap_single); void pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr, @@ -386,6 +389,7 @@ pci_unmap_page(struct pci_dev *pdev, dma_addr_t dma_addr, { pci_unmap_single(pdev, dma_addr, size, direction); } +EXPORT_SYMBOL(pci_unmap_page); /* Allocate and map kernel buffer using consistent mode DMA for PCI device. Returns non-NULL cpu-view pointer to the buffer if @@ -427,6 +431,7 @@ try_again: return cpu_addr; } +EXPORT_SYMBOL(pci_alloc_consistent); /* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must be values that were returned from pci_alloc_consistent. SIZE must @@ -444,7 +449,7 @@ pci_free_consistent(struct pci_dev *pdev, size_t size, void *cpu_addr, DBGA2("pci_free_consistent: [%x,%lx] from %p\n", dma_addr, size, __builtin_return_address(0)); } - +EXPORT_SYMBOL(pci_free_consistent); /* Classify the elements of the scatterlist. Write dma_address of each element with: @@ -672,6 +677,7 @@ pci_map_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents, pci_unmap_sg(pdev, start, out - start, direction); return 0; } +EXPORT_SYMBOL(pci_map_sg); /* Unmap a set of streaming mode DMA translations. Again, cpu read rules concerning calls here are the same as for pci_unmap_single() @@ -752,6 +758,7 @@ pci_unmap_sg(struct pci_dev *pdev, struct scatterlist *sg, int nents, DBGA("pci_unmap_sg: %ld entries\n", nents - (end - sg)); } +EXPORT_SYMBOL(pci_unmap_sg); /* Return whether the given PCI device DMA address mask can be @@ -786,6 +793,7 @@ pci_dma_supported(struct pci_dev *pdev, u64 mask) return 0; } +EXPORT_SYMBOL(pci_dma_supported); /* @@ -908,6 +916,7 @@ pci_dac_dma_supported(struct pci_dev *dev, u64 mask) return ok; } +EXPORT_SYMBOL(pci_dac_dma_supported); dma64_addr_t pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, @@ -917,6 +926,7 @@ pci_dac_page_to_dma(struct pci_dev *pdev, struct page *page, + __pa(page_address(page)) + (dma64_addr_t) offset); } +EXPORT_SYMBOL(pci_dac_page_to_dma); struct page * pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr) @@ -924,13 +934,14 @@ pci_dac_dma_to_page(struct pci_dev *pdev, dma64_addr_t dma_addr) unsigned long paddr = (dma_addr & PAGE_MASK) - alpha_mv.pci_dac_offset; return virt_to_page(__va(paddr)); } +EXPORT_SYMBOL(pci_dac_dma_to_page); unsigned long pci_dac_dma_to_offset(struct pci_dev *pdev, dma64_addr_t dma_addr) { return (dma_addr & ~PAGE_MASK); } - +EXPORT_SYMBOL(pci_dac_dma_to_offset); /* Helper for generic DMA-mapping functions. */ @@ -957,6 +968,7 @@ alpha_gendev_to_pci(struct device *dev) /* This assumes ISA bus master with dma_mask 0xffffff. */ return NULL; } +EXPORT_SYMBOL(alpha_gendev_to_pci); int dma_set_mask(struct device *dev, u64 mask) @@ -969,3 +981,4 @@ dma_set_mask(struct device *dev, u64 mask) return 0; } +EXPORT_SYMBOL(dma_set_mask); diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index b3a8a298036..3370e6faeae 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -205,6 +205,7 @@ start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) regs->ps = 8; wrusp(sp); } +EXPORT_SYMBOL(start_thread); /* * Free current thread data structures etc.. @@ -376,6 +377,7 @@ dump_thread(struct pt_regs * pt, struct user * dump) dump->regs[EF_A2] = pt->r18; memcpy((char *)dump->regs + EF_SIZE, sw->fp, 32 * 8); } +EXPORT_SYMBOL(dump_thread); /* * Fill in the user structure for a ELF core dump. @@ -424,6 +426,7 @@ dump_elf_thread(elf_greg_t *dest, struct pt_regs *pt, struct thread_info *ti) useful value of the thread's UNIQUE field. */ dest[32] = ti->pcb.unique; } +EXPORT_SYMBOL(dump_elf_thread); int dump_elf_task(elf_greg_t *dest, struct task_struct *task) @@ -431,6 +434,7 @@ dump_elf_task(elf_greg_t *dest, struct task_struct *task) dump_elf_thread(dest, task_pt_regs(task), task_thread_info(task)); return 1; } +EXPORT_SYMBOL(dump_elf_task); int dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task) @@ -439,6 +443,7 @@ dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task) memcpy(dest, sw->fp, 32 * 8); return 1; } +EXPORT_SYMBOL(dump_elf_task_fp); /* * sys_execve() executes a new program. diff --git a/arch/alpha/kernel/setup.c b/arch/alpha/kernel/setup.c index a94e6d93e2e..1aea7c7c683 100644 --- a/arch/alpha/kernel/setup.c +++ b/arch/alpha/kernel/setup.c @@ -66,6 +66,7 @@ static struct notifier_block alpha_panic_block = { struct hwrpb_struct *hwrpb; +EXPORT_SYMBOL(hwrpb); unsigned long srm_hae; int alpha_l1i_cacheshape; @@ -111,6 +112,7 @@ unsigned long alpha_agpgart_size = DEFAULT_AGP_APER_SIZE; #ifdef CONFIG_ALPHA_GENERIC struct alpha_machine_vector alpha_mv; int alpha_using_srm; +EXPORT_SYMBOL(alpha_using_srm); #endif static struct alpha_machine_vector *get_sysvec(unsigned long, unsigned long, @@ -137,6 +139,8 @@ struct screen_info screen_info = { .orig_video_points = 16 }; +EXPORT_SYMBOL(screen_info); + /* * The direct map I/O window, if any. This should be the same * for all busses, since it's used by virt_to_bus. @@ -144,6 +148,8 @@ struct screen_info screen_info = { unsigned long __direct_map_base; unsigned long __direct_map_size; +EXPORT_SYMBOL(__direct_map_base); +EXPORT_SYMBOL(__direct_map_size); /* * Declare all of the machine vectors. diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 596780e2c7d..d1ec4f51df1 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -52,6 +52,7 @@ /* A collection of per-processor data. */ struct cpuinfo_alpha cpu_data[NR_CPUS]; +EXPORT_SYMBOL(cpu_data); /* A collection of single bit ipi messages. */ static struct { @@ -74,6 +75,7 @@ EXPORT_SYMBOL(cpu_online_map); int smp_num_probed; /* Internal processor count */ int smp_num_cpus = 1; /* Number that came online. */ +EXPORT_SYMBOL(smp_num_cpus); extern void calibrate_delay(void); @@ -790,6 +792,7 @@ smp_call_function_on_cpu (void (*func) (void *info), void *info, int retry, return 0; } +EXPORT_SYMBOL(smp_call_function_on_cpu); int smp_call_function (void (*func) (void *info), void *info, int retry, int wait) @@ -797,6 +800,7 @@ smp_call_function (void (*func) (void *info), void *info, int retry, int wait) return smp_call_function_on_cpu (func, info, retry, wait, cpu_online_map); } +EXPORT_SYMBOL(smp_call_function); static void ipi_imb(void *ignored) @@ -811,6 +815,7 @@ smp_imb(void) if (on_each_cpu(ipi_imb, NULL, 1, 1)) printk(KERN_CRIT "smp_imb: timed out\n"); } +EXPORT_SYMBOL(smp_imb); static void ipi_flush_tlb_all(void *ignored) @@ -866,6 +871,7 @@ flush_tlb_mm(struct mm_struct *mm) preempt_enable(); } +EXPORT_SYMBOL(flush_tlb_mm); struct flush_tlb_page_struct { struct vm_area_struct *vma; @@ -918,6 +924,7 @@ flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) preempt_enable(); } +EXPORT_SYMBOL(flush_tlb_page); void flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long end) @@ -925,6 +932,7 @@ flush_tlb_range(struct vm_area_struct *vma, unsigned long start, unsigned long e /* On the Alpha we always flush the whole user tlb. */ flush_tlb_mm(vma->vm_mm); } +EXPORT_SYMBOL(flush_tlb_range); static void ipi_flush_icache_page(void *x) diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c index 990ac61028f..f7dd081d57f 100644 --- a/arch/alpha/kernel/srm_env.c +++ b/arch/alpha/kernel/srm_env.c @@ -2,7 +2,7 @@ * srm_env.c - Access to SRM environment * variables through linux' procfs * - * Copyright (C) 2001-2002 Jan-Benedict Glaw <jbglaw@lug-owl.de> + * (C) 2001,2002,2006 by Jan-Benedict Glaw <jbglaw@lug-owl.de> * * This driver is at all a modified version of Erik Mouw's * Documentation/DocBook/procfs_example.c, so: thank @@ -21,7 +21,7 @@ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR * PURPOSE. See the GNU General Public License for more * details. - * + * * You should have received a copy of the GNU General Public * License along with this program; if not, write to the * Free Software Foundation, Inc., 59 Temple Place, @@ -29,33 +29,6 @@ * */ -/* - * Changelog - * ~~~~~~~~~ - * - * Thu, 22 Aug 2002 15:10:43 +0200 - * - Update Config.help entry. I got a number of emails asking - * me to tell their senders if they could make use of this - * piece of code... So: "SRM is something like BIOS for your - * Alpha" - * - Update code formatting a bit to better conform CodingStyle - * rules. - * - So this is v0.0.5, with no changes (except formatting) - * - * Wed, 22 May 2002 00:11:21 +0200 - * - Fix typo on comment (SRC -> SRM) - * - Call this "Version 0.0.4" - * - * Tue, 9 Apr 2002 18:44:40 +0200 - * - Implement access by variable name and additionally - * by number. This is done by creating two subdirectories - * where one holds all names (like the old directory - * did) and the other holding 256 files named like "0", - * "1" and so on. - * - Call this "Version 0.0.3" - * - */ - #include <linux/kernel.h> #include <linux/module.h> #include <linux/init.h> @@ -67,7 +40,7 @@ #define BASE_DIR "srm_environment" /* Subdir in /proc/ */ #define NAMED_DIR "named_variables" /* Subdir for known variables */ #define NUMBERED_DIR "numbered_variables" /* Subdir for all variables */ -#define VERSION "0.0.5" /* Module version */ +#define VERSION "0.0.6" /* Module version */ #define NAME "srm_env" /* Module name */ MODULE_AUTHOR("Jan-Benedict Glaw <jbglaw@lug-owl.de>"); @@ -106,7 +79,6 @@ static srm_env_t srm_named_entries[] = { static srm_env_t srm_numbered_entries[256]; - static int srm_env_read(char *page, char **start, off_t off, int count, int *eof, void *data) @@ -115,21 +87,23 @@ srm_env_read(char *page, char **start, off_t off, int count, int *eof, unsigned long ret; srm_env_t *entry; - if(off != 0) - return -EFAULT; + if (off != 0) { + *eof = 1; + return 0; + } entry = (srm_env_t *) data; ret = callback_getenv(entry->id, page, count); - if((ret >> 61) == 0) + if ((ret >> 61) == 0) { nbytes = (int) ret; - else + *eof = 1; + } else nbytes = -EFAULT; return nbytes; } - static int srm_env_write(struct file *file, const char __user *buffer, unsigned long count, void *data) @@ -155,7 +129,7 @@ srm_env_write(struct file *file, const char __user *buffer, unsigned long count, ret1 = callback_setenv(entry->id, buf, count); if ((ret1 >> 61) == 0) { - do + do ret2 = callback_save_env(); while((ret2 >> 61) == 1); res = (int) ret1; @@ -172,14 +146,14 @@ srm_env_cleanup(void) srm_env_t *entry; unsigned long var_num; - if(base_dir) { + if (base_dir) { /* * Remove named entries */ - if(named_dir) { + if (named_dir) { entry = srm_named_entries; - while(entry->name != NULL && entry->id != 0) { - if(entry->proc_entry) { + while (entry->name != NULL && entry->id != 0) { + if (entry->proc_entry) { remove_proc_entry(entry->name, named_dir); entry->proc_entry = NULL; @@ -192,11 +166,11 @@ srm_env_cleanup(void) /* * Remove numbered entries */ - if(numbered_dir) { - for(var_num = 0; var_num <= 255; var_num++) { + if (numbered_dir) { + for (var_num = 0; var_num <= 255; var_num++) { entry = &srm_numbered_entries[var_num]; - if(entry->proc_entry) { + if (entry->proc_entry) { remove_proc_entry(entry->name, numbered_dir); entry->proc_entry = NULL; @@ -212,7 +186,6 @@ srm_env_cleanup(void) return; } - static int __init srm_env_init(void) { @@ -222,7 +195,7 @@ srm_env_init(void) /* * Check system */ - if(!alpha_using_srm) { + if (!alpha_using_srm) { printk(KERN_INFO "%s: This Alpha system doesn't " "know about SRM (or you've booted " "SRM->MILO->Linux, which gets " @@ -233,14 +206,14 @@ srm_env_init(void) /* * Init numbers */ - for(var_num = 0; var_num <= 255; var_num++) + for (var_num = 0; var_num <= 255; var_num++) sprintf(number[var_num], "%ld", var_num); /* * Create base directory */ base_dir = proc_mkdir(BASE_DIR, NULL); - if(base_dir == NULL) { + if (!base_dir) { printk(KERN_ERR "Couldn't create base dir /proc/%s\n", BASE_DIR); goto cleanup; @@ -251,7 +224,7 @@ srm_env_init(void) * Create per-name subdirectory */ named_dir = proc_mkdir(NAMED_DIR, base_dir); - if(named_dir == NULL) { + if (!named_dir) { printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n", BASE_DIR, NAMED_DIR); goto cleanup; @@ -262,7 +235,7 @@ srm_env_init(void) * Create per-number subdirectory */ numbered_dir = proc_mkdir(NUMBERED_DIR, base_dir); - if(numbered_dir == NULL) { + if (!numbered_dir) { printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n", BASE_DIR, NUMBERED_DIR); goto cleanup; @@ -274,10 +247,10 @@ srm_env_init(void) * Create all named nodes */ entry = srm_named_entries; - while(entry->name != NULL && entry->id != 0) { + while (entry->name && entry->id) { entry->proc_entry = create_proc_entry(entry->name, 0644, named_dir); - if(entry->proc_entry == NULL) + if (!entry->proc_entry) goto cleanup; entry->proc_entry->data = (void *) entry; @@ -291,13 +264,13 @@ srm_env_init(void) /* * Create all numbered nodes */ - for(var_num = 0; var_num <= 255; var_num++) { + for (var_num = 0; var_num <= 255; var_num++) { entry = &srm_numbered_entries[var_num]; entry->name = number[var_num]; entry->proc_entry = create_proc_entry(entry->name, 0644, numbered_dir); - if(entry->proc_entry == NULL) + if (!entry->proc_entry) goto cleanup; entry->id = var_num; @@ -318,7 +291,6 @@ cleanup: return -ENOMEM; } - static void __exit srm_env_exit(void) { @@ -328,7 +300,5 @@ srm_env_exit(void) return; } - module_init(srm_env_init); module_exit(srm_env_exit); - diff --git a/arch/alpha/kernel/time.c b/arch/alpha/kernel/time.c index cf066652398..d7053eb4ffc 100644 --- a/arch/alpha/kernel/time.c +++ b/arch/alpha/kernel/time.c @@ -57,6 +57,7 @@ static int set_rtc_mmss(unsigned long); DEFINE_SPINLOCK(rtc_lock); +EXPORT_SYMBOL(rtc_lock); #define TICK_SIZE (tick_nsec / 1000) diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index 71470e9d93b..76bf071e376 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -48,13 +48,7 @@ SECTIONS . = ALIGN(8); __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; diff --git a/arch/alpha/mm/numa.c b/arch/alpha/mm/numa.c index b826f58c6e7..e3e3806a6f2 100644 --- a/arch/alpha/mm/numa.c +++ b/arch/alpha/mm/numa.c @@ -13,12 +13,14 @@ #include <linux/swap.h> #include <linux/initrd.h> #include <linux/pfn.h> +#include <linux/module.h> #include <asm/hwrpb.h> #include <asm/pgalloc.h> pg_data_t node_data[MAX_NUMNODES]; bootmem_data_t node_bdata[MAX_NUMNODES]; +EXPORT_SYMBOL(node_data); #undef DEBUG_DISCONTIG #ifdef DEBUG_DISCONTIG diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 2a0b2c8a1fe..6f4f8bf3607 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -174,11 +174,13 @@ libs-y := arch/arm/lib/ $(libs-y) # Default target when executing plain make ifeq ($(CONFIG_XIP_KERNEL),y) -all: xipImage +KBUILD_IMAGE := xipImage else -all: zImage +KBUILD_IMAGE := zImage endif +all: $(KBUILD_IMAGE) + boot := arch/arm/boot # Update machine arch and proc symlinks if something which affects diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 028bdc9228f..2e635b814c1 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -662,7 +662,8 @@ EXPORT_SYMBOL(dma_map_single); EXPORT_SYMBOL(dma_unmap_single); EXPORT_SYMBOL(dma_map_sg); EXPORT_SYMBOL(dma_unmap_sg); -EXPORT_SYMBOL(dma_sync_single); +EXPORT_SYMBOL(dma_sync_single_for_cpu); +EXPORT_SYMBOL(dma_sync_single_for_device); EXPORT_SYMBOL(dma_sync_sg); EXPORT_SYMBOL(dmabounce_register_dev); EXPORT_SYMBOL(dmabounce_unregister_dev); diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index c82e4667f45..b43041476e0 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -577,7 +577,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index b983fc59aa4..d96fc8386e2 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -558,7 +558,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index 15e6b0bbbde..3de5c643848 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -217,7 +217,7 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_APM is not set diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig index 074c47a4fb2..a3758913c0b 100644 --- a/arch/arm/configs/collie_defconfig +++ b/arch/arm/configs/collie_defconfig @@ -219,7 +219,7 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set CONFIG_APM=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index a2d6fd398f1..20e68250d83 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 2a1ac6c60ab..df8595ac031 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -615,7 +615,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index 4975b914f92..fac7c3b240c 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -206,10 +206,8 @@ CONFIG_BINFMT_ELF=y # # Power management options # -CONFIG_PM=y -CONFIG_PM_LEGACY=y -# CONFIG_PM_DEBUG is not set -CONFIG_APM=y +# CONFIG_PM is not set +# CONFIG_APM is not set # # Networking diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 54fcd75779d..a4cdafc1548 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -560,7 +560,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # CONFIG_NVRAM is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 05adb0b34e7..b0efd4ca993 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -257,7 +257,7 @@ CONFIG_BINFMT_AOUT=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_APM is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index cb1d94f9049..9b9f2155af3 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -607,7 +607,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set -CONFIG_AT91_WATCHDOG=y +CONFIG_AT91RM9200_WATCHDOG=y # # USB-based Watchdog Cards diff --git a/arch/arm/configs/bast_defconfig b/arch/arm/configs/realview-smp_defconfig index 4a8564f386a..ffd905ff19f 100644 --- a/arch/arm/configs/bast_defconfig +++ b/arch/arm/configs/realview-smp_defconfig @@ -1,136 +1,168 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 02:24:16 2005 +# Linux kernel version: 2.6.19-rc3 +# Wed Oct 25 14:12:00 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y -CONFIG_UID16=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 # # General setup # CONFIG_LOCALVERSION="" -CONFIG_SWAP=y +CONFIG_LOCALVERSION_AUTO=y +# CONFIG_SWAP is not set CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set +# CONFIG_CPUSETS is not set +# CONFIG_RELAY is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +CONFIG_UID16=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set +CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 +# CONFIG_SLOB is not set # # Loadable module support # CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y +# CONFIG_KMOD is not set +CONFIG_STOP_MACHINE=y + +# +# Block layer +# +CONFIG_BLOCK=y +# CONFIG_BLK_DEV_IO_TRACE is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +CONFIG_IOSCHED_DEADLINE=y +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +CONFIG_DEFAULT_DEADLINE=y +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="deadline" # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +CONFIG_ARCH_REALVIEW=y +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set -CONFIG_ARCH_S3C2410=y +# CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# S3C24XX Implementations -# -CONFIG_ARCH_BAST=y -# CONFIG_ARCH_H1940 is not set -# CONFIG_MACH_N30 is not set -# CONFIG_ARCH_SMDK2410 is not set -# CONFIG_ARCH_S3C2440 is not set -CONFIG_MACH_VR1000=y -# CONFIG_MACH_RX3715 is not set -# CONFIG_MACH_OTOM is not set -# CONFIG_MACH_NEXCODER_2440 is not set -CONFIG_CPU_S3C2410=y - -# -# S3C2410 Boot -# -# CONFIG_S3C2410_BOOT_WATCHDOG is not set # -# S3C2410 Setup +# RealView platform type # -CONFIG_S3C2410_DMA=y -# CONFIG_S3C2410_DMA_DEBUG is not set -# CONFIG_S3C2410_PM_DEBUG is not set -# CONFIG_S3C2410_PM_CHECK is not set -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 +CONFIG_MACH_REALVIEW_EB=y +CONFIG_REALVIEW_MPCORE=y # # Processor Type # CONFIG_CPU_32=y -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y +# CONFIG_CPU_ARM926T is not set +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # -# CONFIG_ARM_THUMB is not set +CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_HAS_TLS_REG=y +CONFIG_ARM_GIC=y +CONFIG_ICST307=y # # Bus support # +CONFIG_ARM_AMBA=y # # PCCARD (PCMCIA/CardBus) support @@ -140,7 +172,24 @@ CONFIG_CPU_TLB_V4WBI=y # # Kernel Features # +CONFIG_SMP=y +CONFIG_NR_CPUS=4 +CONFIG_HOTPLUG_CPU=y +CONFIG_LOCAL_TIMERS=y # CONFIG_PREEMPT is not set +# CONFIG_NO_IDLE_HZ is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set CONFIG_ALIGNMENT_TRAP=y # @@ -148,7 +197,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" +CONFIG_CMDLINE="root=/dev/nfs nfsroot=10.1.69.3:/work/nfsroot ip=dhcp console=ttyAMA0 mem=128M" # CONFIG_XIP_KERNEL is not set # @@ -161,20 +210,105 @@ CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" CONFIG_FPE_NWFPE=y # CONFIG_FPE_NWFPE_XP is not set # CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y # # Userspace binary formats # CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y +# CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_ARTHUR is not set # # Power management options # -CONFIG_PM=y -CONFIG_APM=y +# CONFIG_PM is not set +# CONFIG_APM is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_NETDEBUG is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set + +# +# TIPC Configuration (EXPERIMENTAL) +# +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -187,6 +321,12 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set + +# +# Connector - unified userspace <-> kernelspace linker +# +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -195,10 +335,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -210,44 +347,42 @@ CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers # CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y +# CONFIG_MTD_JEDECPROBE is not set CONFIG_MTD_GEN_PROBE=y # CONFIG_MTD_CFI_ADV_OPTIONS is not set CONFIG_MTD_MAP_BANK_WIDTH_1=y CONFIG_MTD_MAP_BANK_WIDTH_2=y CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -CONFIG_MTD_MAP_BANK_WIDTH_16=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set # CONFIG_MTD_MAP_BANK_WIDTH_32 is not set CONFIG_MTD_CFI_I1=y CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_I4 is not set # CONFIG_MTD_CFI_I8 is not set CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set +CONFIG_MTD_CFI_AMDSTD=y # CONFIG_MTD_CFI_STAA is not set CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set # CONFIG_MTD_OBSOLETE_CHIPS is not set -# CONFIG_MTD_XIP is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set -# CONFIG_MTD_IMPA7 is not set -CONFIG_MTD_BAST=y -CONFIG_MTD_BAST_MAXSIZE=4 +CONFIG_MTD_ARM_INTEGRATOR=y +# CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers @@ -255,7 +390,6 @@ CONFIG_MTD_BAST_MAXSIZE=4 # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -268,23 +402,17 @@ CONFIG_MTD_BAST_MAXSIZE=4 # # NAND Flash Device Drivers # -CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set -CONFIG_MTD_NAND_IDS=y -CONFIG_MTD_NAND_S3C2410=y -# CONFIG_MTD_NAND_S3C2410_DEBUG is not set -# CONFIG_MTD_NAND_S3C2410_HWECC is not set -# CONFIG_MTD_NAND_DISKONCHIP is not set -# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support # -CONFIG_PARPORT=y -# CONFIG_PARPORT_PC is not set -# CONFIG_PARPORT_ARC is not set -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_1284=y +# CONFIG_PARPORT is not set # # Plug and Play support @@ -293,59 +421,20 @@ CONFIG_PARPORT_1284=y # # Block devices # -# CONFIG_BLK_DEV_FD is not set -# CONFIG_PARIDE is not set # CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" # CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y # CONFIG_ATA_OVER_ETH is not set # -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -CONFIG_BLK_DEV_IDECD=y -CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDE_BAST=y -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set - -# # SCSI device support # +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set # # Multi-device support (RAID and LVM) @@ -355,6 +444,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # Fusion MPT device support # +# CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support @@ -365,69 +455,8 @@ CONFIG_BLK_DEV_IDE_BAST=y # # -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -CONFIG_IP_TCPDIAG=y -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing +# Network device support # -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set @@ -435,11 +464,17 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# PHY device support +# +# CONFIG_PHYLIB is not set + +# # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_DM9000 is not set # # Ethernet (1000 Mbit) @@ -462,11 +497,12 @@ CONFIG_NET_ETHERNET=y # Wan interfaces # # CONFIG_WAN is not set -# CONFIG_PLIP is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set # # ISDN subsystem @@ -477,6 +513,7 @@ CONFIG_NET_ETHERNET=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -499,6 +536,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -511,12 +549,11 @@ CONFIG_MOUSE_PS2=y # Hardware I/O ports # CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PARKBD is not set +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y # # Character devices @@ -524,49 +561,25 @@ CONFIG_SOUND_GAMEPORT=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_N_HDLC is not set -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_NR_UARTS=8 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -# CONFIG_SERIAL_8250_DETECT_IRQ is not set -# CONFIG_SERIAL_8250_MULTIPORT is not set -# CONFIG_SERIAL_8250_RSA is not set +# CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # -CONFIG_SERIAL_S3C2410=y -CONFIG_SERIAL_S3C2410_CONSOLE=y +# CONFIG_SERIAL_AMBA_PL010 is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -CONFIG_PRINTER=y -# CONFIG_LP_CONSOLE is not set -CONFIG_PPDEV=y -# CONFIG_TIPAR is not set +CONFIG_LEGACY_PTY_COUNT=16 # # IPMI @@ -576,24 +589,15 @@ CONFIG_PPDEV=y # # Watchdog Cards # -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -CONFIG_S3C2410_WATCHDOG=y +# CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_RTC is not set -CONFIG_S3C2410_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # # Ftape, the floppy tape device driver # -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -604,73 +608,43 @@ CONFIG_S3C2410_RTC=y # # I2C support # -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ISA is not set -# CONFIG_I2C_PARPORT is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -CONFIG_I2C_S3C2410=y -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Hardware Sensors Chip support -# -CONFIG_I2C_SENSOR=m -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -CONFIG_SENSORS_LM75=m -# CONFIG_SENSORS_LM77 is not set -CONFIG_SENSORS_LM78=m -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -CONFIG_SENSORS_LM85=m -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set - -# -# Other I2C Chip support -# -CONFIG_SENSORS_EEPROM=m -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Hardware Monitoring support +# +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set # # Misc devices # +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# +# LED devices +# +# CONFIG_NEW_LEDS is not set + +# +# LED drivers +# + +# +# LED Triggers +# # # Multimedia devices @@ -685,13 +659,17 @@ CONFIG_SENSORS_EEPROM=m # # Graphics support # +# CONFIG_FIRMWARE_EDID is not set CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SOFT_CURSOR is not set -CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_ARMCLCD=y +# CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # @@ -699,27 +677,76 @@ CONFIG_FB_MODE_HELPERS=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y # # Logo configuration # -# CONFIG_LOGO is not set +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound # -# CONFIG_SOUND is not set +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=y +CONFIG_SND_TIMER=y +CONFIG_SND_PCM=y +# CONFIG_SND_SEQUENCER is not set +CONFIG_SND_OSSEMUL=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_DYNAMIC_MINORS is not set +CONFIG_SND_SUPPORT_OLD_API=y +CONFIG_SND_VERBOSE_PROCFS=y +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +CONFIG_SND_AC97_CODEC=m +CONFIG_SND_AC97_BUS=m +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ALSA ARM devices +# +CONFIG_SND_ARMAACI=m + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set # +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -727,33 +754,62 @@ CONFIG_USB_ARCH_HAS_HCD=y # # MMC/SD Card support # -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_ARMMMCI=y +# CONFIG_MMC_TIFM_SD is not set + +# +# Real Time Clock +# +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_INTF_DEV_UIE_EMUL=y + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_PL031=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set - -# -# XFS support -# +# CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -765,7 +821,7 @@ CONFIG_DNOTIFY=y # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y +# CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" @@ -775,12 +831,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -792,18 +849,9 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS_FS=y -CONFIG_JFFS_FS_VERBOSE=0 -# CONFIG_JFFS_PROC_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -# CONFIG_JFFS2_FS_NAND is not set -# CONFIG_JFFS2_FS_NOR_ECC is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set @@ -814,12 +862,15 @@ CONFIG_JFFS2_RTIME=y # Network File Systems # CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set # CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set @@ -828,33 +879,20 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set # # Partition Types # -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set +# CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -# CONFIG_MINIX_SUBPARTITION is not set -CONFIG_SOLARIS_X86_PARTITION=y -# CONFIG_UNIXWARE_DISKLABEL is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set # # Native Language Support # CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set +CONFIG_NLS_CODEPAGE_437=y # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set @@ -878,7 +916,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set # CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set +CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set @@ -902,25 +940,37 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=16 +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_RWSEMS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y +# CONFIG_UNWIND_INFO is not set +CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set -# CONFIG_DEBUG_ERRORS is not set +CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C2410_PORT=y -CONFIG_DEBUG_S3C2410_UART=0 # # Security options @@ -934,14 +984,11 @@ CONFIG_DEBUG_S3C2410_UART=0 # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index a8322264104..c0152393e49 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Wed Sep 20 20:27:31 2006 +# Linux kernel version: 2.6.19-rc4 +# Fri Nov 3 17:41:31 2006 # CONFIG_ARM=y +# CONFIG_GENERIC_TIME is not set CONFIG_MMU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_TRACE_IRQFLAGS_SUPPORT=y @@ -29,17 +30,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y -CONFIG_SYSCTL=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -62,7 +66,8 @@ CONFIG_BASE_SMALL=0 # Loadable module support # CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y @@ -70,6 +75,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -120,6 +126,7 @@ CONFIG_ARCH_S3C2410=y # # S3C24XX Implementations # +# CONFIG_MACH_AML_M5900 is not set CONFIG_MACH_ANUBIS=y CONFIG_MACH_OSIRIS=y CONFIG_ARCH_BAST=y @@ -178,6 +185,8 @@ CONFIG_CPU_CACHE_V4WT=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_COPY_V4WB=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features @@ -249,8 +258,9 @@ CONFIG_BINFMT_AOUT=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set CONFIG_APM=y # @@ -266,6 +276,7 @@ CONFIG_NET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -286,10 +297,12 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -377,6 +390,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -418,6 +432,8 @@ CONFIG_MTD_BAST_MAXSIZE=4 # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -512,6 +528,7 @@ CONFIG_BLK_DEV_IDE_BAST=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set # # Multi-device support (RAID and LVM) @@ -606,6 +623,7 @@ CONFIG_DM9000=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -628,6 +646,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -734,7 +753,6 @@ CONFIG_S3C2410_WATCHDOG=y # CONFIG_USBPCWATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -CONFIG_S3C2410_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set @@ -747,7 +765,6 @@ CONFIG_S3C2410_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -792,12 +809,26 @@ CONFIG_SENSORS_EEPROM=m # # SPI support # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=m +# CONFIG_SPI_BUTTERFLY is not set +CONFIG_SPI_S3C24XX_GPIO=m +CONFIG_SPI_S3C24XX=m + +# +# SPI Protocol Masters +# # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -820,6 +851,7 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set CONFIG_SENSORS_LM75=m # CONFIG_SENSORS_LM77 is not set CONFIG_SENSORS_LM78=m @@ -834,6 +866,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -845,25 +878,31 @@ CONFIG_SENSORS_LM85=m # # Misc devices # +# CONFIG_TIFM_CORE is not set # # LED devices # -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=m # # LED drivers # +CONFIG_LEDS_S3C24XX=m # # LED Triggers # +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=m +# CONFIG_LEDS_TRIGGER_IDE_DISK is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=m # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -876,6 +915,7 @@ CONFIG_VIDEO_V4L2=y # CONFIG_FIRMWARE_EDID=y CONFIG_FB=y +# CONFIG_FB_DDC is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -951,7 +991,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # may also be needed; see USB_STORAGE Help for more information # -# CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1007,6 +1046,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set @@ -1014,11 +1054,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1039,7 +1080,37 @@ CONFIG_USB_MON=y # Real Time Clock # CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +CONFIG_RTC_DRV_S3C=y +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_V3020 is not set # # File systems @@ -1051,6 +1122,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1058,6 +1130,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -1089,6 +1162,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -1219,6 +1293,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y @@ -1238,9 +1313,10 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y -# CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_DEBUG_USER=y # CONFIG_DEBUG_WAITQ is not set @@ -1262,10 +1338,6 @@ CONFIG_DEBUG_S3C2410_UART=0 # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set diff --git a/arch/arm/configs/smdk2410_defconfig b/arch/arm/configs/smdk2410_defconfig deleted file mode 100644 index 4d123d33c7d..00000000000 --- a/arch/arm/configs/smdk2410_defconfig +++ /dev/null @@ -1,735 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.12-rc1-bk2 -# Sun Mar 27 22:42:40 2005 -# -CONFIG_ARM=y -CONFIG_MMU=y -CONFIG_UID16=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_IOMAP=y - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y -CONFIG_BROKEN_ON_SMP=y - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set -# CONFIG_HOTPLUG is not set -CONFIG_KOBJECT_UEVENT=y -# CONFIG_IKCONFIG is not set -# CONFIG_EMBEDDED is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_ALL is not set -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# System Type -# -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -CONFIG_ARCH_S3C2410=y -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set - -# -# S3C24XX Implementations -# -# CONFIG_ARCH_BAST is not set -# CONFIG_ARCH_H1940 is not set -# CONFIG_MACH_N30 is not set -CONFIG_ARCH_SMDK2410=y -# CONFIG_ARCH_S3C2440 is not set -# CONFIG_MACH_VR1000 is not set -# CONFIG_MACH_RX3715 is not set -# CONFIG_MACH_OTOM is not set -# CONFIG_MACH_NEXCODER_2440 is not set -CONFIG_CPU_S3C2410=y - -# -# S3C2410 Boot -# - -# -# S3C2410 Setup -# -# CONFIG_S3C2410_DMA is not set -CONFIG_S3C2410_LOWLEVEL_UART_PORT=0 - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_ARM920T=y -CONFIG_CPU_32v4=y -CONFIG_CPU_ABRT_EV4T=y -CONFIG_CPU_CACHE_V4WT=y -CONFIG_CPU_CACHE_VIVT=y -CONFIG_CPU_COPY_V4WB=y -CONFIG_CPU_TLB_V4WBI=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_WRITETHROUGH is not set - -# -# Bus support -# - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -# CONFIG_PREEMPT is not set -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=1f04 mem=32M" -# CONFIG_XIP_KERNEL is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -# CONFIG_FPE_NWFPE is not set -# CONFIG_FPE_FASTFPE is not set - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -CONFIG_BINFMT_AOUT=y -# CONFIG_BINFMT_MISC is not set -# CONFIG_ARTHUR is not set - -# -# Power management options -# -# CONFIG_PM is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set -# CONFIG_DEBUG_DRIVER is not set - -# -# Memory Technology Devices (MTD) -# -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -# CONFIG_MTD_PARTITIONS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -# CONFIG_MTD_CFI_AMDSTD is not set -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -# CONFIG_MTD_PHYSMAP is not set -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_EDB7312 is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# -# CONFIG_MTD_NAND is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_DEV_FD is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set -# CONFIG_BLK_DEV_NBD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CDROM_PKTCDVD is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Networking support -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -# CONFIG_NETLINK_DEV is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_IP_TCPDIAG is not set -# CONFIG_IP_TCPDIAG_IPV6 is not set -# CONFIG_IPV6 is not set -# CONFIG_NETFILTER is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -# CONFIG_NET_CLS_ROUTE is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set -# CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Input device support -# -CONFIG_INPUT=y - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_SERPORT=y -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set -CONFIG_SOUND_GAMEPORT=y - -# -# Character devices -# -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_S3C2410=y -CONFIG_SERIAL_S3C2410_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -# CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_S3C2410_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -# CONFIG_I2C is not set - -# -# Misc devices -# - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set - -# -# Graphics support -# -CONFIG_FB=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -CONFIG_FB_SOFT_CURSOR=y -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_VIRTUAL=y - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE=y -# CONFIG_FONTS is not set -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB is not set - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set - -# -# XFS support -# -# CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_SYSFS=y -# CONFIG_DEVFS_FS is not set -# CONFIG_DEVPTS_FS_XATTR is not set -# CONFIG_TMPFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -# CONFIG_OSF_PARTITION is not set -# CONFIG_AMIGA_PARTITION is not set -# CONFIG_ATARI_PARTITION is not set -# CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set -# CONFIG_LDM_PARTITION is not set -# CONFIG_SGI_PARTITION is not set -# CONFIG_ULTRIX_PARTITION is not set -# CONFIG_SUN_PARTITION is not set -# CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# -# CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y -# CONFIG_MAGIC_SYSRQ is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_SPINLOCK_SLEEP is not set -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set -CONFIG_FRAME_POINTER=y -CONFIG_DEBUG_USER=y -# CONFIG_DEBUG_WAITQ is not set -# CONFIG_DEBUG_ERRORS is not set -CONFIG_DEBUG_LL=y -# CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C2410_PORT=y -CONFIG_DEBUG_S3C2410_UART=0 - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -# CONFIG_CRYPTO is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -# CONFIG_CRC_CCITT is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 96b7a776242..f7bf6ef27d1 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -200,7 +200,7 @@ CONFIG_BINFMT_ELF=y # Power management options # CONFIG_PM=y -CONFIG_PM_LEGACY=y +# CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set # CONFIG_APM is not set diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index da69e660574..4779f474f91 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -178,9 +178,3 @@ EXPORT_SYMBOL(_find_next_zero_bit_be); EXPORT_SYMBOL(_find_first_bit_be); EXPORT_SYMBOL(_find_next_bit_be); #endif - - /* syscalls */ -EXPORT_SYMBOL(sys_write); -EXPORT_SYMBOL(sys_lseek); -EXPORT_SYMBOL(sys_exit); -EXPORT_SYMBOL(sys_wait4); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6bbd93dd186..29efc9f8205 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -357,6 +357,9 @@ static void __init setup_processor(void) #ifndef CONFIG_VFP elf_hwcap &= ~HWCAP_VFP; #endif +#ifndef CONFIG_IWMMXT + elf_hwcap &= ~HWCAP_IWMMXT; +#endif cpu_proc_init(); } @@ -854,6 +857,7 @@ static const char *hwcap_str[] = { "vfp", "edsp", "java", + "iwmmxt", NULL }; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 421329f5e18..a07d202143c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/module.h> #include <linux/delay.h> #include <linux/init.h> #include <linux/spinlock.h> @@ -19,6 +20,7 @@ #include <linux/cpu.h> #include <linux/smp.h> #include <linux/seq_file.h> +#include <linux/irq.h> #include <asm/atomic.h> #include <asm/cacheflush.h> @@ -474,25 +476,26 @@ void show_local_irqs(struct seq_file *p) seq_putc(p, '\n'); } -static void ipi_timer(struct pt_regs *regs) +static void ipi_timer(void) { - int user = user_mode(regs); - irq_enter(); - profile_tick(CPU_PROFILING, regs); - update_process_times(user); + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); irq_exit(); } #ifdef CONFIG_LOCAL_TIMERS asmlinkage void do_local_timer(struct pt_regs *regs) { + struct pt_regs *old_regs = set_irq_regs(regs); int cpu = smp_processor_id(); if (local_timer_ack()) { irq_stat[cpu].local_timer_irqs++; - ipi_timer(regs); + ipi_timer(); } + + set_irq_regs(old_regs); } #endif @@ -551,6 +554,7 @@ asmlinkage void do_IPI(struct pt_regs *regs) { unsigned int cpu = smp_processor_id(); struct ipi_data *ipi = &per_cpu(ipi_data, cpu); + struct pt_regs *old_regs = set_irq_regs(regs); ipi->ipi_count++; @@ -574,7 +578,7 @@ asmlinkage void do_IPI(struct pt_regs *regs) switch (nextmsg) { case IPI_TIMER: - ipi_timer(regs); + ipi_timer(); break; case IPI_RESCHEDULE: @@ -599,6 +603,8 @@ asmlinkage void do_IPI(struct pt_regs *regs) } } while (msgs); } + + set_irq_regs(old_regs); } void smp_send_reschedule(int cpu) diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index c03cab5c4c7..6ff5e3ff6cb 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -220,10 +220,10 @@ EXPORT_SYMBOL(leds_event); #ifdef CONFIG_LEDS_TIMER static inline void do_leds(void) { - static unsigned int count = 50; + static unsigned int count = HZ/2; if (--count == 0) { - count = 50; + count = HZ/2; leds_event(led_timer); } } @@ -327,13 +327,12 @@ EXPORT_SYMBOL(restore_time_delta); */ void timer_tick(void) { - struct pt_regs *regs = get_irq_regs(); profile_tick(CPU_PROFILING); do_leds(); do_set_rtc(); do_timer(1); #ifndef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode(get_irq_regs())); #endif } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 3ca574ee277..a8fa75ea07a 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -45,13 +45,7 @@ SECTIONS *(.early_param.init) __early_end = .; __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS __initcall_end = .; __con_initcall_start = .; *(.con_initcall.init) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index fa5d4976f51..1463330ed8e 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -16,6 +16,7 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/irq.h> #include <asm/io.h> #include <asm/irq.h> diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index a2c94a47b2b..2499a7707e3 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -85,7 +85,7 @@ n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) irq = IRQ_IOP32X_XINT0; } else if (PCI_SLOT(dev->devfn) == 2) { /* RTL8110SB #2 */ - irq = IRQ_IOP32X_XINT1; + irq = IRQ_IOP32X_XINT3; } else if (PCI_SLOT(dev->devfn) == 3) { /* Sil3512 */ irq = IRQ_IOP32X_XINT2; diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index a6f14801872..0fdd03ab36e 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -133,11 +133,13 @@ static void ixdp2400_pci_postinit(void) struct pci_dev *dev; if (ixdp2x00_master_npu()) { - dev = pci_find_slot(1, IXDP2400_SLAVE_ENET_DEVFN); + dev = pci_get_bus_and_slot(1, IXDP2400_SLAVE_ENET_DEVFN); pci_remove_bus_device(dev); + pci_dev_put(dev); } else { - dev = pci_find_slot(1, IXDP2400_MASTER_ENET_DEVFN); + dev = pci_get_bus_and_slot(1, IXDP2400_MASTER_ENET_DEVFN); pci_remove_bus_device(dev); + pci_dev_put(dev); ixdp2x00_slave_pci_postinit(); } diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 91d36d91dac..70d247f09a7 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -261,14 +261,16 @@ int __init ixdp2800_pci_init(void) pci_common_init(&ixdp2800_pci); if (ixdp2x00_master_npu()) { - dev = pci_find_slot(1, IXDP2800_SLAVE_ENET_DEVFN); + dev = pci_get_bus_and_slot(1, IXDP2800_SLAVE_ENET_DEVFN); pci_remove_bus_device(dev); + pci_dev_put(dev); ixdp2800_master_enable_slave(); ixdp2800_master_wait_for_slave_bus_scan(); } else { - dev = pci_find_slot(1, IXDP2800_MASTER_ENET_DEVFN); + dev = pci_get_bus_and_slot(1, IXDP2800_MASTER_ENET_DEVFN); pci_remove_bus_device(dev); + pci_dev_put(dev); } } diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index af48cb52dfc..aa2655092d2 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -241,11 +241,14 @@ void ixdp2x00_slave_pci_postinit(void) /* * Remove PMC device is there is one */ - if((dev = pci_find_slot(1, IXDP2X00_PMC_DEVFN))) + if((dev = pci_get_bus_and_slot(1, IXDP2X00_PMC_DEVFN))) { pci_remove_bus_device(dev); + pci_dev_put(dev); + } - dev = pci_find_slot(0, IXDP2X00_21555_DEVFN); + dev = pci_get_bus_and_slot(0, IXDP2X00_21555_DEVFN); pci_remove_bus_device(dev); + pci_dev_put(dev); } /************************************************************************** diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index c7513f6eb50..fbe288a8da6 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -86,7 +86,8 @@ enum ixp4xx_irq_type { IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE }; -static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type); +/* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ +static unsigned long long ixp4xx_irq_edge = 0; /* * IRQ -> GPIO mapping table @@ -135,7 +136,11 @@ static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) default: return -EINVAL; } - ixp4xx_config_irq(irq, irq_type); + + if (irq_type == IXP4XX_IRQ_EDGE) + ixp4xx_irq_edge |= (1 << irq); + else + ixp4xx_irq_edge &= ~(1 << irq); if (line >= 8) { /* pins 8-15 */ line -= 8; @@ -167,14 +172,6 @@ static void ixp4xx_irq_mask(unsigned int irq) *IXP4XX_ICMR &= ~(1 << irq); } -static void ixp4xx_irq_unmask(unsigned int irq) -{ - if (cpu_is_ixp46x() && irq >= 32) - *IXP4XX_ICMR2 |= (1 << (irq - 32)); - else - *IXP4XX_ICMR |= (1 << irq); -} - static void ixp4xx_irq_ack(unsigned int irq) { int line = (irq < 32) ? irq2gpio[irq] : -1; @@ -187,41 +184,25 @@ static void ixp4xx_irq_ack(unsigned int irq) * Level triggered interrupts on GPIO lines can only be cleared when the * interrupt condition disappears. */ -static void ixp4xx_irq_level_unmask(unsigned int irq) +static void ixp4xx_irq_unmask(unsigned int irq) { - ixp4xx_irq_ack(irq); - ixp4xx_irq_unmask(irq); -} + if (!(ixp4xx_irq_edge & (1 << irq))) + ixp4xx_irq_ack(irq); -static struct irqchip ixp4xx_irq_level_chip = { - .ack = ixp4xx_irq_mask, - .mask = ixp4xx_irq_mask, - .unmask = ixp4xx_irq_level_unmask, - .set_type = ixp4xx_set_irq_type, -}; + if (cpu_is_ixp46x() && irq >= 32) + *IXP4XX_ICMR2 |= (1 << (irq - 32)); + else + *IXP4XX_ICMR |= (1 << irq); +} -static struct irqchip ixp4xx_irq_edge_chip = { +static struct irqchip ixp4xx_irq_chip = { + .name = "IXP4xx", .ack = ixp4xx_irq_ack, .mask = ixp4xx_irq_mask, .unmask = ixp4xx_irq_unmask, .set_type = ixp4xx_set_irq_type, }; -static void ixp4xx_config_irq(unsigned irq, enum ixp4xx_irq_type type) -{ - switch (type) { - case IXP4XX_IRQ_LEVEL: - set_irq_chip(irq, &ixp4xx_irq_level_chip); - set_irq_handler(irq, do_level_IRQ); - break; - case IXP4XX_IRQ_EDGE: - set_irq_chip(irq, &ixp4xx_irq_edge_chip); - set_irq_handler(irq, do_edge_IRQ); - break; - } - set_irq_flags(irq, IRQF_VALID); -} - void __init ixp4xx_init_irq(void) { int i = 0; @@ -241,8 +222,11 @@ void __init ixp4xx_init_irq(void) } /* Default to all level triggered */ - for(i = 0; i < NR_IRQS; i++) - ixp4xx_config_irq(i, IXP4XX_IRQ_LEVEL); + for(i = 0; i < NR_IRQS; i++) { + set_irq_chip(i, &ixp4xx_irq_chip); + set_irq_handler(i, do_level_IRQ); + set_irq_flags(i, IRQF_VALID); + } } diff --git a/arch/arm/mach-lh7a40x/Kconfig b/arch/arm/mach-lh7a40x/Kconfig index 558a34f53b1..147b01928a9 100644 --- a/arch/arm/mach-lh7a40x/Kconfig +++ b/arch/arm/mach-lh7a40x/Kconfig @@ -14,7 +14,7 @@ config MACH_LPD7A400 bool "LPD7A400 Card Engine" select ARCH_LH7A400 # select IDE_POLL - select HAS_TOUCHSCREEN_ADS7843_LH7 +# select HAS_TOUCHSCREEN_ADS7843_LH7 help Say Y here if you are using Logic Product Development's LPD7A400 CardEngine. For the time being, the LPD7A400 and @@ -24,7 +24,7 @@ config MACH_LPD7A404 bool "LPD7A404 Card Engine" select ARCH_LH7A404 # select IDE_POLL - select HAS_TOUCHSCREEN_ADC_LH7 +# select HAS_TOUCHSCREEN_ADC_LH7 help Say Y here if you are using Logic Product Development's LPD7A404 CardEngine. For the time being, the LPD7A400 and diff --git a/arch/arm/mach-lh7a40x/common.h b/arch/arm/mach-lh7a40x/common.h index 18e8bb4eb20..0ca20c6c83b 100644 --- a/arch/arm/mach-lh7a40x/common.h +++ b/arch/arm/mach-lh7a40x/common.h @@ -15,4 +15,4 @@ extern void lh7a404_init_irq (void); extern void lh7a40x_clcd_init (void); extern void lh7a40x_init_board_irq (void); -#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq), regs) +#define IRQ_DISPATCH(irq) desc_handle_irq((irq),(irq_desc + irq)) diff --git a/arch/arm/mach-pnx4008/core.c b/arch/arm/mach-pnx4008/core.c index 3d73c1e9375..429c796938b 100644 --- a/arch/arm/mach-pnx4008/core.c +++ b/arch/arm/mach-pnx4008/core.c @@ -133,10 +133,79 @@ static struct platform_device serial_device = { }, }; +static struct platform_device nand_flash_device = { + .name = "pnx4008-flash", + .id = -1, + .dev = { + .coherent_dma_mask = 0xFFFFFFFF, + }, +}; + +/* The dmamask must be set for OHCI to work */ +static u64 ohci_dmamask = ~(u32) 0; + +static struct resource ohci_resources[] = { + { + .start = IO_ADDRESS(PNX4008_USB_CONFIG_BASE), + .end = IO_ADDRESS(PNX4008_USB_CONFIG_BASE + 0x100), + .flags = IORESOURCE_MEM, + }, { + .start = USB_HOST_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device ohci_device = { + .name = "pnx4008-usb-ohci", + .id = -1, + .dev = { + .dma_mask = &ohci_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(ohci_resources), + .resource = ohci_resources, +}; + +static struct platform_device sdum_device = { + .name = "pnx4008-sdum", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +static struct platform_device rgbfb_device = { + .name = "pnx4008-rgbfb", + .id = 0, + .dev = { + .coherent_dma_mask = 0xffffffff, + } +}; + +struct resource watchdog_resources[] = { + { + .start = PNX4008_WDOG_BASE, + .end = PNX4008_WDOG_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device watchdog_device = { + .name = "pnx4008-watchdog", + .id = -1, + .num_resources = ARRAY_SIZE(watchdog_resources), + .resource = watchdog_resources, +}; + static struct platform_device *devices[] __initdata = { &spipnx_1, &spipnx_2, &serial_device, + &ohci_device, + &nand_flash_device, + &sdum_device, + &rgbfb_device, + &watchdog_device, }; diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index ee80d62119d..142c33c3dff 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -397,7 +397,7 @@ static void lubbock_mmc_poll(unsigned long data) if (LUB_IRQ_SET_CLR & (1 << 0)) mod_timer(&mmc_timer, jiffies + MMC_POLL_RATE); else { - (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data, NULL); + (void) mmc_detect_int(LUBBOCK_SD_IRQ, (void *)data); enable_irq(LUBBOCK_SD_IRQ); } } diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c index db6393c9986..ba346546150 100644 --- a/arch/arm/mach-s3c2410/gpio.c +++ b/arch/arm/mach-s3c2410/gpio.c @@ -3,7 +3,7 @@ * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> * - * S3C2410 GPIO support + * S3C24XX GPIO support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -163,3 +163,22 @@ unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) } EXPORT_SYMBOL(s3c2410_modify_misccr); + +int s3c2410_gpio_getirq(unsigned int pin) +{ + if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) + return -1; /* not valid interrupts */ + + if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) + return -1; /* not valid pin */ + + if (pin < S3C2410_GPF4) + return (pin - S3C2410_GPF0) + IRQ_EINT0; + + if (pin < S3C2410_GPG0) + return (pin - S3C2410_GPF4) + IRQ_EINT4; + + return (pin - S3C2410_GPG0) + IRQ_EINT8; +} + +EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/mach-s3c2410/s3c2410-gpio.c b/arch/arm/mach-s3c2410/s3c2410-gpio.c index a2098f692d8..ec3a276cc3c 100644 --- a/arch/arm/mach-s3c2410/s3c2410-gpio.c +++ b/arch/arm/mach-s3c2410/s3c2410-gpio.c @@ -69,22 +69,3 @@ int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, } EXPORT_SYMBOL(s3c2410_gpio_irqfilter); - -int s3c2410_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPF0 || pin > S3C2410_GPG15) - return -1; /* not valid interrupts */ - - if (pin < S3C2410_GPG0 && pin > S3C2410_GPF7) - return -1; /* not valid pin */ - - if (pin < S3C2410_GPF4) - return (pin - S3C2410_GPF0) + IRQ_EINT0; - - if (pin < S3C2410_GPG0) - return (pin - S3C2410_GPF4) + IRQ_EINT4; - - return (pin - S3C2410_GPG0) + IRQ_EINT8; -} - -EXPORT_SYMBOL(s3c2410_gpio_getirq); diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 63959772993..78f4c134604 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -82,6 +82,14 @@ static struct sdram_params sdram_tbl[] __initdata = { .twr = 9, .refresh = 64000, .cas_latency = 3, + }, { /* Samsung K4S281632B-1H */ + .name = "K4S281632B-1H", + .rows = 12, + .tck = 10, + .trp = 20, + .twr = 10, + .refresh = 64000, + .cas_latency = 3, }, { /* Samsung KM416S4030CT */ .name = "KM416S4030CT", .rows = 13, @@ -366,6 +374,8 @@ static int __init sa1110_clk_init(void) if (machine_is_h3100()) name = "KM416S4030CT"; + if (machine_is_jornada720()) + name = "K4S281632B-1H"; } sdram = sa1110_find_sdram(name); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 2aa150b57ba..3b8576111c1 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -188,12 +188,12 @@ static struct map_desc versatile_io_desc[] __initdata = { .length = SZ_4K, .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_VIRT_BASE, + .virtual = (unsigned long)VERSATILE_PCI_VIRT_BASE, .pfn = __phys_to_pfn(VERSATILE_PCI_BASE), .length = VERSATILE_PCI_BASE_SIZE, .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_CFG_VIRT_BASE, + .virtual = (unsigned long)VERSATILE_PCI_CFG_VIRT_BASE, .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 13bbd08ff84..5cd0b5d9e7e 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -40,14 +40,15 @@ * Cfg 42000000 - 42FFFFFF PCI config * */ -#define SYS_PCICTL IO_ADDRESS(VERSATILE_SYS_PCICTL) -#define PCI_IMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) -#define PCI_IMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) -#define PCI_IMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) -#define PCI_SMAP0 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) -#define PCI_SMAP1 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) -#define PCI_SMAP2 IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) -#define PCI_SELFID IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) +#define __IO_ADDRESS(n) ((void __iomem *)(unsigned long)IO_ADDRESS(n)) +#define SYS_PCICTL __IO_ADDRESS(VERSATILE_SYS_PCICTL) +#define PCI_IMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x0) +#define PCI_IMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x4) +#define PCI_IMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x8) +#define PCI_SMAP0 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x10) +#define PCI_SMAP1 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x14) +#define PCI_SMAP2 __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0x18) +#define PCI_SELFID __IO_ADDRESS(VERSATILE_PCI_CORE_BASE+0xc) #define DEVICE_ID_OFFSET 0x00 #define CSR_OFFSET 0x04 @@ -76,7 +77,7 @@ static int __init versatile_pci_slot_ignore(char *str) __setup("pci_slot_ignore=", versatile_pci_slot_ignore); -static unsigned long __pci_addr(struct pci_bus *bus, +static void __iomem *__pci_addr(struct pci_bus *bus, unsigned int devfn, int offset) { unsigned int busnr = bus->number; @@ -91,14 +92,14 @@ static unsigned long __pci_addr(struct pci_bus *bus, if (devfn > 255) BUG(); - return (VERSATILE_PCI_CFG_VIRT_BASE | (busnr << 16) | + return VERSATILE_PCI_CFG_VIRT_BASE + ((busnr << 16) | (PCI_SLOT(devfn) << 11) | (PCI_FUNC(devfn) << 8) | offset); } static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val) { - unsigned long addr = __pci_addr(bus, devfn, where); + void __iomem *addr = __pci_addr(bus, devfn, where & ~3); u32 v; int slot = PCI_SLOT(devfn); @@ -121,13 +122,12 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh break; case 2: - v = __raw_readl(addr & ~3); - if (addr & 2) v >>= 16; + v = __raw_readl(addr); + if (where & 2) v >>= 16; v &= 0xffff; break; default: - addr &= ~3; v = __raw_readl(addr); break; } @@ -140,7 +140,7 @@ static int versatile_read_config(struct pci_bus *bus, unsigned int devfn, int wh static int versatile_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) { - unsigned long addr = __pci_addr(bus, devfn, where); + void __iomem *addr = __pci_addr(bus, devfn, where); int slot = PCI_SLOT(devfn); if (pci_slot_ignore & (1 << slot)) { @@ -279,7 +279,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) printk("PCI core found (slot %d)\n",myslot); __raw_writel(myslot, PCI_SELFID); - local_pci_cfg_base = (void *) VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); + local_pci_cfg_base = VERSATILE_PCI_CFG_VIRT_BASE + (myslot << 11); val = __raw_readl(local_pci_cfg_base + CSR_OFFSET); val |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE; diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 22217fe2650..b5814b4b6f3 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -32,40 +32,51 @@ extern unsigned long phys_initrd_start; extern unsigned long phys_initrd_size; /* - * The sole use of this is to pass memory configuration - * data from paging_init to mem_init. + * This is used to pass memory configuration data from paging_init + * to mem_init, and by show_mem() to skip holes in the memory map. */ -static struct meminfo meminfo __initdata = { 0, }; +static struct meminfo meminfo = { 0, }; + +#define for_each_nodebank(iter,mi,no) \ + for (iter = 0; iter < mi->nr_banks; iter++) \ + if (mi->bank[iter].node == no) void show_mem(void) { int free = 0, total = 0, reserved = 0; - int shared = 0, cached = 0, slab = 0, node; + int shared = 0, cached = 0, slab = 0, node, i; + struct meminfo * mi = &meminfo; printk("Mem-info:\n"); show_free_areas(); printk("Free swap: %6ldkB\n", nr_swap_pages<<(PAGE_SHIFT-10)); for_each_online_node(node) { - struct page *page, *end; - - page = NODE_MEM_MAP(node); - end = page + NODE_DATA(node)->node_spanned_pages; - - do { - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (PageSlab(page)) - slab++; - else if (!page_count(page)) - free++; - else - shared += page_count(page) - 1; - page++; - } while (page < end); + for_each_nodebank (i,mi,node) { + unsigned int pfn1, pfn2; + struct page *page, *end; + + pfn1 = mi->bank[i].start >> PAGE_SHIFT; + pfn2 = (mi->bank[i].size + mi->bank[i].start) >> PAGE_SHIFT; + + page = NODE_MEM_MAP(node) + pfn1; + end = NODE_MEM_MAP(node) + pfn2; + + do { + total++; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (PageSlab(page)) + slab++; + else if (!page_count(page)) + free++; + else + shared += page_count(page) - 1; + page++; + } while (page < end); + } } printk("%d pages of RAM\n", total); @@ -76,10 +87,6 @@ void show_mem(void) printk("%d pages swap cached\n", cached); } -#define for_each_nodebank(iter,mi,no) \ - for (iter = 0; iter < mi->nr_banks; iter++) \ - if (mi->bank[iter].node == no) - /* * FIXME: We really want to avoid allocating the bootmap bitmap * over the top of the initrd. Hopefully, this is located towards diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index e8b377d637f..2749c1f88d7 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -909,7 +909,7 @@ __pxa270_proc_info: b __xscale_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP + .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_IWMMXT .long cpu_pxa270_name .long xscale_processor_functions .long v4wbi_tlb_fns diff --git a/arch/arm/oprofile/op_counter.h b/arch/arm/oprofile/op_counter.h index 8c5351d751c..ca942a63b52 100644 --- a/arch/arm/oprofile/op_counter.h +++ b/arch/arm/oprofile/op_counter.h @@ -10,8 +10,6 @@ #ifndef OP_COUNTER_H #define OP_COUNTER_H -#define OP_MAX_COUNTER 5 - /* Per performance monitor configuration as set via * oprofilefs. */ diff --git a/arch/arm/oprofile/op_model_xscale.c b/arch/arm/oprofile/op_model_xscale.c index 7899d3ca75a..7c3289c2acd 100644 --- a/arch/arm/oprofile/op_model_xscale.c +++ b/arch/arm/oprofile/op_model_xscale.c @@ -20,7 +20,8 @@ #include <linux/sched.h> #include <linux/oprofile.h> #include <linux/interrupt.h> -#include <asm/irq.h> +#include <linux/irq.h> + #include <asm/system.h> #include "op_counter.h" diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index b02af1d740f..579c69ae9ff 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -4,7 +4,7 @@ # # Up to date versions of this file can be obtained from: # -# http://www.arm.linux.org.uk/developer/machines/?action=download +# http://www.arm.linux.org.uk/developer/machines/download.php # # Please do not send patches to this file; it is automatically generated! # To add an entry into this database, please see Documentation/arm/README, @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Sep 23 13:20:43 2006 +# Last update: Mon Oct 16 21:13:36 2006 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -1157,3 +1157,17 @@ adsturboxb MACH_ADSTURBOXB ADSTURBOXB 1143 oti4110 MACH_OTI4110 OTI4110 1144 hme_pxa MACH_HME_PXA HME_PXA 1145 deisterdca MACH_DEISTERDCA DEISTERDCA 1146 +ces_ssem2 MACH_CES_SSEM2 CES_SSEM2 1147 +ces_mtr MACH_CES_MTR CES_MTR 1148 +tds_avng_sbc MACH_TDS_AVNG_SBC TDS_AVNG_SBC 1149 +everest MACH_EVEREST EVEREST 1150 +pnx4010 MACH_PNX4010 PNX4010 1151 +oxnas MACH_OXNAS OXNAS 1152 +fiori MACH_FIORI FIORI 1153 +ml1200 MACH_ML1200 ML1200 1154 +cactus MACH_CACTUS CACTUS 1155 +nb2xxx MACH_NB2XXX NB2XXX 1156 +hw6900 MACH_HW6900 HW6900 1157 +cdcs_quoll MACH_CDCS_QUOLL CDCS_QUOLL 1158 +quicksilver MACH_QUICKSILVER QUICKSILVER 1159 +uplat926 MACH_UPLAT926 UPLAT926 1160 diff --git a/arch/arm/vfp/vfpdouble.c b/arch/arm/vfp/vfpdouble.c index 4fc05ee0a2e..e44b9ed0f81 100644 --- a/arch/arm/vfp/vfpdouble.c +++ b/arch/arm/vfp/vfpdouble.c @@ -56,7 +56,7 @@ static void vfp_double_normalise_denormal(struct vfp_double *vd) { int bits = 31 - fls(vd->significand >> 32); if (bits == 31) - bits = 62 - fls(vd->significand); + bits = 63 - fls(vd->significand); vfp_double_dump("normalise_denormal: in", vd); diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index dedbb449632..f08eafbddcc 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -90,7 +90,7 @@ void vfp_raise_sigfpe(unsigned int sicode, struct pt_regs *regs) info.si_signo = SIGFPE; info.si_code = sicode; - info.si_addr = (void *)(instruction_pointer(regs) - 4); + info.si_addr = (void __user *)(instruction_pointer(regs) - 4); /* * This is the same as NWFPE, because it's not clear what @@ -148,6 +148,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_ /* * These are arranged in priority order, least to highest. */ + RAISE(FPSCR_DZC, FPSCR_DZE, FPE_FLTDIV); RAISE(FPSCR_IXC, FPSCR_IXE, FPE_FLTRES); RAISE(FPSCR_UFC, FPSCR_UFE, FPE_FLTUND); RAISE(FPSCR_OFC, FPSCR_OFE, FPE_FLTOVF); diff --git a/arch/arm26/kernel/armksyms.c b/arch/arm26/kernel/armksyms.c index 07907b6ecb6..93293d04b30 100644 --- a/arch/arm26/kernel/armksyms.c +++ b/arch/arm26/kernel/armksyms.c @@ -202,14 +202,6 @@ EXPORT_SYMBOL(_find_next_zero_bit_le); EXPORT_SYMBOL(elf_platform); EXPORT_SYMBOL(elf_hwcap); - /* syscalls */ -EXPORT_SYMBOL(sys_write); -EXPORT_SYMBOL(sys_read); -EXPORT_SYMBOL(sys_lseek); -EXPORT_SYMBOL(sys_open); -EXPORT_SYMBOL(sys_exit); -EXPORT_SYMBOL(sys_wait4); - #ifdef CONFIG_PREEMPT EXPORT_SYMBOL(kernel_flag); #endif diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile index cefc95a7398..7b842e98efe 100644 --- a/arch/avr32/Makefile +++ b/arch/avr32/Makefile @@ -7,7 +7,7 @@ # Default target when executing plain make .PHONY: all -all: uImage vmlinux.elf linux.lst +all: uImage vmlinux.elf KBUILD_DEFCONFIG := atstk1002_defconfig @@ -21,9 +21,7 @@ cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000 CFLAGS += $(cpuflags-y) AFLAGS += $(cpuflags-y) -CHECKFLAGS += -D__avr32__ - -LIBGCC := $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) +CHECKFLAGS += -D__avr32__ -D__BIG_ENDIAN head-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/head.o head-y += arch/avr32/kernel/head.o @@ -32,7 +30,7 @@ core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/ core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/ core-y += arch/avr32/kernel/ core-y += arch/avr32/mm/ -libs-y += arch/avr32/lib/ #$(LIBGCC) +libs-y += arch/avr32/lib/ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap @@ -48,6 +46,8 @@ endif archprepare: include/asm-avr32/.arch +CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch + BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec .PHONY: $(BOOT_TARGETS) install @@ -71,14 +71,19 @@ vmlinux.elf vmlinux.bin uImage.srec uImage vmlinux.cso: vmlinux install: vmlinux $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@ -linux.s: vmlinux +vmlinux.s: vmlinux $(call if_changed,disasm) -linux.lst: vmlinux +vmlinux.lst: vmlinux $(call if_changed,listing) +CLEAN_FILES += vmlinux.s vmlinux.lst + +archclean: + $(Q)$(MAKE) $(clean)=$(boot) + define archhelp @echo '* vmlinux.elf - ELF image with load address 0' @echo ' vmlinux.cso - PathFinder CSO image' - @echo ' uImage - Create a bootable image for U-Boot' + @echo '* uImage - Create a bootable image for U-Boot' endef diff --git a/arch/avr32/boards/atstk1000/setup.c b/arch/avr32/boards/atstk1000/setup.c index 191ab85de9a..272c011802a 100644 --- a/arch/avr32/boards/atstk1000/setup.c +++ b/arch/avr32/boards/atstk1000/setup.c @@ -21,15 +21,6 @@ struct tag *bootloader_tags __initdata; struct lcdc_platform_data __initdata atstk1000_fb0_data; -asmlinkage void __init board_early_init(void) -{ - extern void sdram_init(void); - -#ifdef CONFIG_LOADER_STANDALONE - sdram_init(); -#endif -} - void __init board_setup_fbmem(unsigned long fbmem_start, unsigned long fbmem_size) { diff --git a/arch/avr32/boot/images/Makefile b/arch/avr32/boot/images/Makefile index ccd74eeecec..219720a47bf 100644 --- a/arch/avr32/boot/images/Makefile +++ b/arch/avr32/boot/images/Makefile @@ -37,14 +37,12 @@ OBJCOPYFLAGS_vmlinux.elf := --change-section-lma .text-0x80000000 \ --change-section-lma .data-0x80000000 \ --change-section-lma .init-0x80000000 \ --change-section-lma .bss-0x80000000 \ - --change-section-lma .initrd-0x80000000 \ --change-section-lma __param-0x80000000 \ --change-section-lma __ksymtab-0x80000000 \ --change-section-lma __ksymtab_gpl-0x80000000 \ --change-section-lma __kcrctab-0x80000000 \ --change-section-lma __kcrctab_gpl-0x80000000 \ --change-section-lma __ksymtab_strings-0x80000000 \ - --change-section-lma .got-0x80000000 \ --set-start 0xa0000000 $(obj)/vmlinux.elf: vmlinux FORCE $(call if_changed,objcopy) @@ -59,4 +57,4 @@ install: $(BOOTIMAGE) sh $(srctree)/install-kernel.sh $< # Generated files to be removed upon make clean -clean-files := vmlinux* uImage uImage.srec +clean-files := vmlinux.elf vmlinux.bin vmlinux.gz uImage uImage.srec diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 6c2c5e00dfc..ae92a14ef9a 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Tue Jul 11 12:41:36 2006 +# Linux kernel version: 2.6.19-rc2 +# Fri Oct 20 11:52:37 2006 # CONFIG_AVR32=y CONFIG_GENERIC_HARDIRQS=y CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_TIME=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -25,16 +26,23 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y -# CONFIG_AUDIT is not set +CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_TASKSTATS=y +CONFIG_TASK_DELAY_ACCT=y +# CONFIG_UTS_NS is not set +CONFIG_AUDIT=y # CONFIG_IKCONFIG is not set -# CONFIG_RELAY is not set +CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_TASK_XACCT is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -43,14 +51,15 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y # CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y CONFIG_SHMEM=y -# CONFIG_SLAB is not set -# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 -CONFIG_SLOB=y +# CONFIG_SLOB is not set # # Loadable module support @@ -65,6 +74,7 @@ CONFIG_MODULE_UNLOAD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -166,10 +176,12 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -199,7 +211,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -212,7 +223,6 @@ CONFIG_TCP_CONG_BIC=y # Network testing # # CONFIG_NET_PKTGEN is not set -# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set @@ -239,7 +249,84 @@ CONFIG_STANDALONE=y # # Memory Technology Devices (MTD) # -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x8000000 +CONFIG_MTD_PHYSMAP_LEN=0x0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# OneNAND Flash Device Drivers +# +# CONFIG_MTD_ONENAND is not set # # Parallel port support @@ -260,11 +347,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set @@ -274,6 +368,12 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -305,14 +405,11 @@ CONFIG_TUN=m # # PHY device support # -# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y +# CONFIG_NET_ETHERNET is not set # # Ethernet (1000 Mbit) @@ -341,10 +438,11 @@ CONFIG_PPP=m CONFIG_PPP_ASYNC=m # CONFIG_PPP_SYNC_TTY is not set CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set +CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -417,7 +515,6 @@ CONFIG_UNIX98_PTYS=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -427,23 +524,13 @@ CONFIG_UNIX98_PTYS=y # # SPI support # -CONFIG_SPI=y -# CONFIG_SPI_DEBUG is not set -CONFIG_SPI_MASTER=y - -# -# SPI Master Controller Drivers -# -CONFIG_SPI_ATMEL=m -# CONFIG_SPI_BITBANG is not set - -# -# SPI Protocol Masters -# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -452,14 +539,9 @@ CONFIG_SPI_ATMEL=m # CONFIG_HWMON_VID is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -470,28 +552,8 @@ CONFIG_VIDEO_V4L2=y # Graphics support # # CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=m -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -CONFIG_FB_SIDSA=m -CONFIG_FB_SIDSA_DEFAULT_BPP=24 -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_BACKLIGHT_CLASS_DEVICE is not set -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_DEVICE=y -CONFIG_LCD_LTV350QV=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -561,18 +623,21 @@ CONFIG_LCD_LTV350QV=m # # File systems # -CONFIG_EXT2_FS=y +CONFIG_EXT2_FS=m # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=m -CONFIG_ROMFS_FS=m -# CONFIG_INOTIFY is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set # CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set @@ -600,8 +665,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m @@ -616,6 +683,16 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set @@ -626,26 +703,10 @@ CONFIG_CONFIGFS_FS=m # # Network File Systems # -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFS_FS is not set # CONFIG_NFSD is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -# CONFIG_CIFS_WEAK_PW_HASH is not set -# CONFIG_CIFS_XATTR is not set -# CONFIG_CIFS_DEBUG2 is not set -# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_CIFS is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -665,7 +726,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set -CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_850 is not set # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set @@ -705,13 +766,17 @@ CONFIG_NLS_UTF8=m # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_RWSEMS is not set @@ -722,11 +787,13 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set -CONFIG_KPROBES=y +# CONFIG_KPROBES is not set # # Security options @@ -740,15 +807,13 @@ CONFIG_KPROBES=y # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -CONFIG_CRC32=m +CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=m -CONFIG_ZLIB_DEFLATE=m +CONFIG_AUDIT_GENERIC=y +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 04f767a272b..372e3f8b241 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include <linux/io.h> #include <linux/module.h> #include <asm/checksum.h> @@ -53,3 +54,11 @@ EXPORT_SYMBOL(find_next_zero_bit); EXPORT_SYMBOL(find_first_bit); EXPORT_SYMBOL(find_next_bit); EXPORT_SYMBOL(generic_find_next_zero_le_bit); + +/* I/O primitives (lib/io-*.S) */ +EXPORT_SYMBOL(__raw_readsb); +EXPORT_SYMBOL(__raw_readsw); +EXPORT_SYMBOL(__raw_readsl); +EXPORT_SYMBOL(__raw_writesb); +EXPORT_SYMBOL(__raw_writesw); +EXPORT_SYMBOL(__raw_writesl); diff --git a/arch/avr32/kernel/head.S b/arch/avr32/kernel/head.S index 773b7ad87be..6163bd0acb9 100644 --- a/arch/avr32/kernel/head.S +++ b/arch/avr32/kernel/head.S @@ -30,9 +30,6 @@ kernel_entry: mov r7, 0 #endif - /* Set up the PIO, SDRAM controller, early printk, etc. */ - rcall board_early_init - /* Start the show */ lddpc pc, kernel_start_addr diff --git a/arch/avr32/kernel/kprobes.c b/arch/avr32/kernel/kprobes.c index 6caf9e8d808..ca41fc1edbe 100644 --- a/arch/avr32/kernel/kprobes.c +++ b/arch/avr32/kernel/kprobes.c @@ -109,7 +109,7 @@ static int __kprobes kprobe_handler(struct pt_regs *regs) void *addr = (void *)regs->pc; int ret = 0; - pr_debug("kprobe_handler: kprobe_running=%d\n", + pr_debug("kprobe_handler: kprobe_running=%p\n", kprobe_running()); /* diff --git a/arch/avr32/kernel/module.c b/arch/avr32/kernel/module.c index dfc32f2817b..b599eae6457 100644 --- a/arch/avr32/kernel/module.c +++ b/arch/avr32/kernel/module.c @@ -263,7 +263,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, * value of PC. Just subtract the value of * GOT, and we're done. */ - pr_debug("GOTPC: PC=0x%lx, got_offset=0x%lx, core=0x%p\n", + pr_debug("GOTPC: PC=0x%x, got_offset=0x%lx, core=0x%p\n", relocation, module->arch.got_offset, module->module_core); relocation -= ((unsigned long)module->module_core @@ -282,7 +282,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, && (relocation & 0xffff0000) != 0xffff0000) return reloc_overflow(module, "R_AVR32_GOT16S", relocation); - pr_debug("GOT reloc @ 0x%lx -> %lu\n", + pr_debug("GOT reloc @ 0x%x -> %u\n", rel->r_offset, relocation); value = *location; value = ((value & 0xffff0000) diff --git a/arch/avr32/kernel/ptrace.c b/arch/avr32/kernel/ptrace.c index 3c89e59029a..f2e81cd7900 100644 --- a/arch/avr32/kernel/ptrace.c +++ b/arch/avr32/kernel/ptrace.c @@ -157,7 +157,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) unsigned long tmp; int ret; - pr_debug("arch_ptrace(%ld, %ld, %#lx, %#lx)\n", + pr_debug("arch_ptrace(%ld, %d, %#lx, %#lx)\n", request, child->pid, addr, data); pr_debug("ptrace: Enabling monitor mode...\n"); diff --git a/arch/avr32/kernel/syscall-stubs.S b/arch/avr32/kernel/syscall-stubs.S index 7589a9b426c..890286a1e62 100644 --- a/arch/avr32/kernel/syscall-stubs.S +++ b/arch/avr32/kernel/syscall-stubs.S @@ -100,3 +100,12 @@ __sys_splice: rcall sys_splice sub sp, -4 popm pc + + .global __sys_epoll_pwait + .type __sys_epoll_pwait,@function +__sys_epoll_pwait: + pushm lr + st.w --sp, ARG6 + rcall sys_epoll_pwait + sub sp, -4 + popm pc diff --git a/arch/avr32/kernel/syscall_table.S b/arch/avr32/kernel/syscall_table.S index 63b206965d0..db8f8b55ffd 100644 --- a/arch/avr32/kernel/syscall_table.S +++ b/arch/avr32/kernel/syscall_table.S @@ -286,4 +286,5 @@ sys_call_table: .long sys_sync_file_range .long sys_tee .long sys_vmsplice + .long __sys_epoll_pwait /* 265 */ .long sys_ni_syscall /* r8 is saturated at nr_syscalls */ diff --git a/arch/avr32/kernel/time.c b/arch/avr32/kernel/time.c index 3e56b9f4358..5a247ba71a7 100644 --- a/arch/avr32/kernel/time.c +++ b/arch/avr32/kernel/time.c @@ -124,15 +124,15 @@ unsigned long long sched_clock(void) * * In UP mode, it is invoked from the (global) timer_interrupt. */ -static void local_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static void local_timer_interrupt(int irq, void *dev_id) { if (current->pid) - profile_tick(CPU_PROFILING, regs); - update_process_times(user_mode(regs)); + profile_tick(CPU_PROFILING); + update_process_times(user_mode(get_irq_regs())); } static irqreturn_t -timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +timer_interrupt(int irq, void *dev_id) { unsigned int count; @@ -157,7 +157,7 @@ timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) * * SMP is not supported yet. */ - local_timer_interrupt(irq, dev_id, regs); + local_timer_interrupt(irq, dev_id); return IRQ_HANDLED; } diff --git a/arch/avr32/kernel/vmlinux.lds.c b/arch/avr32/kernel/vmlinux.lds.c index cdd627c6b7d..5c4424e362b 100644 --- a/arch/avr32/kernel/vmlinux.lds.c +++ b/arch/avr32/kernel/vmlinux.lds.c @@ -38,13 +38,7 @@ SECTIONS __setup_end = .; . = ALIGN(4); __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS __initcall_end = .; __con_initcall_start = .; *(.con_initcall.init) diff --git a/arch/avr32/lib/Makefile b/arch/avr32/lib/Makefile index 09ac43e4052..084d95bac5e 100644 --- a/arch/avr32/lib/Makefile +++ b/arch/avr32/lib/Makefile @@ -7,4 +7,5 @@ lib-y += strncpy_from_user.o strnlen_user.o lib-y += delay.o memset.o memcpy.o findbit.o lib-y += csum_partial.o csum_partial_copy_generic.o lib-y += io-readsw.o io-readsl.o io-writesw.o io-writesl.o +lib-y += io-readsb.o io-writesb.o lib-y += __avr32_lsl64.o __avr32_lsr64.o __avr32_asr64.o diff --git a/arch/avr32/lib/findbit.S b/arch/avr32/lib/findbit.S index 2b4856f4bf7..c6b91dee857 100644 --- a/arch/avr32/lib/findbit.S +++ b/arch/avr32/lib/findbit.S @@ -136,6 +136,7 @@ ENTRY(generic_find_next_zero_le_bit) /* offset is not word-aligned. Handle the first (32 - r10) bits */ ldswp.w r8, r12[0] sub r12, -4 + com r8 lsr r8, r8, r10 brne .L_found @@ -146,7 +147,7 @@ ENTRY(generic_find_next_zero_le_bit) /* Main loop. offset must be word-aligned */ 1: ldswp.w r8, r12[0] - cp.w r8, 0 + com r8 brne .L_found sub r12, -4 sub r9, 32 diff --git a/arch/avr32/lib/io-readsb.S b/arch/avr32/lib/io-readsb.S new file mode 100644 index 00000000000..2be5da7ed26 --- /dev/null +++ b/arch/avr32/lib/io-readsb.S @@ -0,0 +1,49 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .text +.Lnot_word_aligned: +1: ld.ub r8, r12[0] + sub r10, 1 + st.b r11++, r8 + reteq r12 + tst r11, r9 + brne 1b + + /* fall through */ + + .global __raw_readsb + .type __raw_readsb,@function +__raw_readsb: + cp.w r10, 0 + mov r9, 3 + reteq r12 + + tst r11, r9 + brne .Lnot_word_aligned + + sub r10, 4 + brlt 2f + +1: ldins.b r8:t, r12[0] + ldins.b r8:u, r12[0] + ldins.b r8:l, r12[0] + ldins.b r8:b, r12[0] + st.w r11++, r8 + sub r10, 4 + brge 1b + +2: sub r10, -4 + reteq r12 + +3: ld.uh r8, r12[0] + sub r10, 1 + st.b r11++, r8 + brne 3b + + retal r12 diff --git a/arch/avr32/lib/io-writesb.S b/arch/avr32/lib/io-writesb.S new file mode 100644 index 00000000000..b4ebaacccf6 --- /dev/null +++ b/arch/avr32/lib/io-writesb.S @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2004-2006 Atmel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + .text +.Lnot_word_aligned: +1: ld.ub r8, r11++ + sub r10, 1 + st.b r12[0], r8 + reteq r12 + tst r11, r9 + brne 1b + + /* fall through */ + + .global __raw_writesb + .type __raw_writesb,@function +__raw_writesb: + cp.w r10, 0 + mov r9, 3 + reteq r12 + + tst r11, r9 + brne .Lnot_word_aligned + + sub r10, 4 + brlt 2f + +1: ld.w r8, r11++ + bfextu r9, r8, 24, 8 + st.b r12[0], r9 + bfextu r9, r8, 16, 8 + st.b r12[0], r9 + bfextu r9, r8, 8, 8 + st.b r12[0], r9 + st.b r12[0], r8 + sub r10, 4 + brge 1b + +2: sub r10, -4 + reteq r12 + +3: ld.ub r8, r11++ + sub r10, 1 + st.b r12[0], r8 + brne 3b + + retal r12 diff --git a/arch/avr32/mach-at32ap/extint.c b/arch/avr32/mach-at32ap/extint.c index 7da9c5f7a0e..4dff1f98890 100644 --- a/arch/avr32/mach-at32ap/extint.c +++ b/arch/avr32/mach-at32ap/extint.c @@ -102,8 +102,7 @@ struct irq_chip eim_chip = { .set_type = eim_set_irq_type, }; -static void demux_eim_irq(unsigned int irq, struct irq_desc *desc, - struct pt_regs *regs) +static void demux_eim_irq(unsigned int irq, struct irq_desc *desc) { struct at32_sm *sm = desc->handler_data; struct irq_desc *ext_desc; @@ -121,7 +120,7 @@ static void demux_eim_irq(unsigned int irq, struct irq_desc *desc, ext_irq = i + sm->eim_first_irq; ext_desc = irq_desc + ext_irq; - ext_desc->handle_irq(ext_irq, ext_desc, regs); + ext_desc->handle_irq(ext_irq, ext_desc); } spin_unlock(&sm->lock); diff --git a/arch/avr32/mach-at32ap/hsmc.h b/arch/avr32/mach-at32ap/hsmc.h index 5681276fafd..d1d48e26e39 100644 --- a/arch/avr32/mach-at32ap/hsmc.h +++ b/arch/avr32/mach-at32ap/hsmc.h @@ -120,8 +120,8 @@ /* Register access macros */ #define hsmc_readl(port,reg) \ - readl((port)->regs + HSMC_##reg) + __raw_readl((port)->regs + HSMC_##reg) #define hsmc_writel(port,reg,value) \ - writel((value), (port)->regs + HSMC_##reg) + __raw_writel((value), (port)->regs + HSMC_##reg) #endif /* __ASM_AVR32_HSMC_H__ */ diff --git a/arch/avr32/mach-at32ap/intc.c b/arch/avr32/mach-at32ap/intc.c index 74f8c9f2f03..eb87a18ad7b 100644 --- a/arch/avr32/mach-at32ap/intc.c +++ b/arch/avr32/mach-at32ap/intc.c @@ -52,16 +52,19 @@ static struct intc intc0 = { asmlinkage void do_IRQ(int level, struct pt_regs *regs) { struct irq_desc *desc; + struct pt_regs *old_regs; unsigned int irq; unsigned long status_reg; local_irq_disable(); + old_regs = set_irq_regs(regs); + irq_enter(); irq = intc_readl(&intc0, INTCAUSE0 - 4 * level); desc = irq_desc + irq; - desc->handle_irq(irq, desc, regs); + desc->handle_irq(irq, desc); /* * Clear all interrupt level masks so that we may handle @@ -75,6 +78,8 @@ asmlinkage void do_IRQ(int level, struct pt_regs *regs) sysreg_write(SR, status_reg); irq_exit(); + + set_irq_regs(old_regs); } void __init init_IRQ(void) diff --git a/arch/avr32/mach-at32ap/intc.h b/arch/avr32/mach-at32ap/intc.h index d289ca2fff1..4d3664e43a8 100644 --- a/arch/avr32/mach-at32ap/intc.h +++ b/arch/avr32/mach-at32ap/intc.h @@ -321,7 +321,9 @@ #define INTC_MKBF(name, value) (((value) & ((1 << INTC_##name##_SIZE) - 1)) << INTC_##name##_OFFSET) #define INTC_GETBF(name, value) (((value) >> INTC_##name##_OFFSET) & ((1 << INTC_##name##_SIZE) - 1)) -#define intc_readl(port,reg) readl((port)->regs + INTC_##reg) -#define intc_writel(port,reg,value) writel((value), (port)->regs + INTC_##reg) +#define intc_readl(port,reg) \ + __raw_readl((port)->regs + INTC_##reg) +#define intc_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + INTC_##reg) #endif /* __ASM_AVR32_PERIHP_INTC_H__ */ diff --git a/arch/avr32/mach-at32ap/pio.h b/arch/avr32/mach-at32ap/pio.h index cfea1235159..50fa3aca32c 100644 --- a/arch/avr32/mach-at32ap/pio.h +++ b/arch/avr32/mach-at32ap/pio.h @@ -170,8 +170,10 @@ #define PIO_BFINS(name,value,old) (((old) & ~(((1 << PIO_##name##_SIZE) - 1) << PIO_##name##_OFFSET)) | PIO_BF(name,value)) /* Register access macros */ -#define pio_readl(port,reg) readl((port)->regs + PIO_##reg) -#define pio_writel(port,reg,value) writel((value), (port)->regs + PIO_##reg) +#define pio_readl(port,reg) \ + __raw_readl((port)->regs + PIO_##reg) +#define pio_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + PIO_##reg) void at32_init_pio(struct platform_device *pdev); diff --git a/arch/avr32/mach-at32ap/sm.h b/arch/avr32/mach-at32ap/sm.h index 27565822ae2..cad02b512bc 100644 --- a/arch/avr32/mach-at32ap/sm.h +++ b/arch/avr32/mach-at32ap/sm.h @@ -234,7 +234,9 @@ #define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value)) /* Register access macros */ -#define sm_readl(port,reg) readl((port)->regs + SM_##reg) -#define sm_writel(port,reg,value) writel((value), (port)->regs + SM_##reg) +#define sm_readl(port,reg) \ + __raw_readl((port)->regs + SM_##reg) +#define sm_writel(port,reg,value) \ + __raw_writel((value), (port)->regs + SM_##reg) #endif /* __ASM_AVR32_SM_H__ */ diff --git a/arch/avr32/mm/init.c b/arch/avr32/mm/init.c index 3e6c4103980..70da6894acc 100644 --- a/arch/avr32/mm/init.c +++ b/arch/avr32/mm/init.c @@ -206,7 +206,7 @@ void __init setup_bootmem(void) if (mem_ramdisk) { #ifdef CONFIG_BLK_DEV_INITRD - initrd_start = __va(mem_ramdisk->addr); + initrd_start = (unsigned long)__va(mem_ramdisk->addr); initrd_end = initrd_start + mem_ramdisk->size; print_memory_map("RAMDISK images", mem_ramdisk); diff --git a/arch/avr32/mm/ioremap.c b/arch/avr32/mm/ioremap.c index 8cfec65e37f..3437c82434a 100644 --- a/arch/avr32/mm/ioremap.c +++ b/arch/avr32/mm/ioremap.c @@ -77,6 +77,8 @@ void __iounmap(void __iomem *addr) if ((unsigned long)addr >= P4SEG) return; + if (PXSEG(addr) == P2SEG) + return; p = remove_vm_area((void *)(PAGE_MASK & (unsigned long __force)addr)); if (unlikely(!p)) { diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ba096ebb0b1..2449637e6fc 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -2051,7 +2051,6 @@ static void cryptocop_job_queue_close(void) spin_lock_irqsave(&cryptocop_process_lock, process_flags); /* Empty the job queue. */ - spin_lock_irqsave(&cryptocop_process_lock, process_flags); for (i = 0; i < cryptocop_prio_no_prios; i++){ if (!list_empty(&(cryptocop_job_queues[i].jobs))){ list_for_each_safe(node, tmp, &(cryptocop_job_queues[i].jobs)) { diff --git a/arch/frv/kernel/vmlinux.lds.S b/arch/frv/kernel/vmlinux.lds.S index f474534ba78..9c1fb12367f 100644 --- a/arch/frv/kernel/vmlinux.lds.S +++ b/arch/frv/kernel/vmlinux.lds.S @@ -44,13 +44,7 @@ SECTIONS __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/h8300/kernel/vmlinux.lds.S b/arch/h8300/kernel/vmlinux.lds.S index 6406c388f88..756325dd480 100644 --- a/arch/h8300/kernel/vmlinux.lds.S +++ b/arch/h8300/kernel/vmlinux.lds.S @@ -118,13 +118,7 @@ SECTIONS . = ALIGN(0x4) ; ___setup_end = .; ___initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS ___initcall_end = .; ___con_initcall_start = .; *(.con_initcall.init) diff --git a/arch/i386/Kconfig.cpu b/arch/i386/Kconfig.cpu index 21c9a4e7110..fc4f2abccf0 100644 --- a/arch/i386/Kconfig.cpu +++ b/arch/i386/Kconfig.cpu @@ -7,6 +7,7 @@ choice config M386 bool "386" + depends on !UML ---help--- This is the processor type of your CPU. This information is used for optimizing purposes. In order to compile a kernel that can run on @@ -301,7 +302,7 @@ config X86_USE_PPRO_CHECKSUM config X86_USE_3DNOW bool - depends on MCYRIXIII || MK7 || MGEODE_LX + depends on (MCYRIXIII || MK7 || MGEODE_LX) && !UML default y config X86_OOSTORE diff --git a/arch/i386/Makefile b/arch/i386/Makefile index 7cc0b189b82..0677908dfa0 100644 --- a/arch/i386/Makefile +++ b/arch/i386/Makefile @@ -42,6 +42,10 @@ cflags-$(CONFIG_REGPARM) += -mregparm=3 # temporary until string.h is fixed cflags-y += -ffreestanding +# this works around some issues with generating unwind tables in older gccs +# newer gccs do it by default +cflags-y += -maccumulate-outgoing-args + # Disable unit-at-a-time mode on pre-gcc-4.0 compilers, it makes gcc use # a lot more stack due to the lack of sharing of stacklots: CFLAGS += $(shell if [ $(call cc-version) -lt 0400 ] ; then echo $(call cc-option,-fno-unit-at-a-time); fi ;) @@ -51,8 +55,8 @@ cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) # is .cfi_signal_frame supported too? -cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) -AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) +cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) +AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) CFLAGS += $(cflags-y) diff --git a/arch/i386/defconfig b/arch/i386/defconfig index 60c0c02574f..97aacd6bd7d 100644 --- a/arch/i386/defconfig +++ b/arch/i386/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Thu Oct 5 13:04:53 2006 +# Linux kernel version: 2.6.19-rc2-git4 +# Sat Oct 21 03:38:56 2006 # CONFIG_X86_32=y CONFIG_GENERIC_TIME=y @@ -380,8 +380,8 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -483,6 +483,13 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y @@ -1024,6 +1031,7 @@ CONFIG_HANGCHECK_TIMER=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -1032,12 +1040,6 @@ CONFIG_HANGCHECK_TIMER=y # CONFIG_HWMON_VID is not set # -# Misc devices -# -# CONFIG_IBM_ASM is not set -# CONFIG_TIFM_CORE is not set - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1169,7 +1171,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1215,6 +1216,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1284,6 +1286,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1307,6 +1310,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1384,7 +1388,6 @@ CONFIG_SUNRPC=y # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set -CONFIG_GENERIC_ACL=y # # Partition Types @@ -1437,10 +1440,6 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # -# Distributed Lock Manager -# - -# # Instrumentation Support # CONFIG_PROFILING=y @@ -1480,6 +1479,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_UNWIND_INFO=y CONFIG_STACK_UNWIND=y # CONFIG_FORCED_INLINING is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set CONFIG_EARLY_PRINTK=y diff --git a/arch/i386/kernel/acpi/boot.c b/arch/i386/kernel/acpi/boot.c index 92f79cdd9a4..d12fb97a533 100644 --- a/arch/i386/kernel/acpi/boot.c +++ b/arch/i386/kernel/acpi/boot.c @@ -70,7 +70,7 @@ static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return #define PREFIX "ACPI: " -int acpi_noirq __initdata; /* skip ACPI IRQ initialization */ +int acpi_noirq; /* skip ACPI IRQ initialization */ int acpi_pci_disabled __initdata; /* skip ACPI PCI scan and IRQ initialization */ int acpi_ht __initdata = 1; /* enable HT */ @@ -82,6 +82,7 @@ EXPORT_SYMBOL(acpi_strict); acpi_interrupt_flags acpi_sci_flags __initdata; int acpi_sci_override_gsi __initdata; int acpi_skip_timer_override __initdata; +int acpi_use_timer_override __initdata; #ifdef CONFIG_X86_LOCAL_APIC static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; @@ -332,7 +333,7 @@ acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end) /* * Parse Interrupt Source Override for the ACPI SCI */ -static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) +static void acpi_sci_ioapic_setup(u32 bus_irq, u32 gsi, u16 polarity, u16 trigger) { if (trigger == 0) /* compatible SCI trigger is level */ trigger = 3; @@ -352,13 +353,13 @@ static void acpi_sci_ioapic_setup(u32 gsi, u16 polarity, u16 trigger) * If GSI is < 16, this will update its flags, * else it will create a new mp_irqs[] entry. */ - mp_override_legacy_irq(gsi, polarity, trigger, gsi); + mp_override_legacy_irq(bus_irq, polarity, trigger, gsi); /* * stash over-ride to indicate we've been here * and for later update of acpi_fadt */ - acpi_sci_override_gsi = gsi; + acpi_sci_override_gsi = bus_irq; return; } @@ -376,7 +377,7 @@ acpi_parse_int_src_ovr(acpi_table_entry_header * header, acpi_table_print_madt_entry(header); if (intsrc->bus_irq == acpi_fadt.sci_int) { - acpi_sci_ioapic_setup(intsrc->global_irq, + acpi_sci_ioapic_setup(intsrc->bus_irq, intsrc->global_irq, intsrc->flags.polarity, intsrc->flags.trigger); return 0; @@ -879,7 +880,7 @@ static int __init acpi_parse_madt_ioapic_entries(void) * pretend we got one so we can set the SCI flags. */ if (!acpi_sci_override_gsi) - acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0); + acpi_sci_ioapic_setup(acpi_fadt.sci_int, acpi_fadt.sci_int, 0, 0); /* Fill in identity legacy mapings where no override */ mp_config_acpi_legacy_irqs(); @@ -1300,6 +1301,13 @@ static int __init parse_acpi_skip_timer_override(char *arg) return 0; } early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override); + +static int __init parse_acpi_use_timer_override(char *arg) +{ + acpi_use_timer_override = 1; + return 0; +} +early_param("acpi_use_timer_override", parse_acpi_use_timer_override); #endif /* CONFIG_X86_IO_APIC */ static int __init setup_acpi_sci(char *s) diff --git a/arch/i386/kernel/acpi/cstate.c b/arch/i386/kernel/acpi/cstate.c index 25db49ef177..20563e52c62 100644 --- a/arch/i386/kernel/acpi/cstate.c +++ b/arch/i386/kernel/acpi/cstate.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/acpi.h> +#include <linux/cpu.h> #include <acpi/processor.h> #include <asm/acpi.h> @@ -41,5 +42,124 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; } } - EXPORT_SYMBOL(acpi_processor_power_init_bm_check); + +/* The code below handles cstate entry with monitor-mwait pair on Intel*/ + +struct cstate_entry_s { + struct { + unsigned int eax; + unsigned int ecx; + } states[ACPI_PROCESSOR_MAX_POWER]; +}; +static struct cstate_entry_s *cpu_cstate_entry; /* per CPU ptr */ + +static short mwait_supported[ACPI_PROCESSOR_MAX_POWER]; + +#define MWAIT_SUBSTATE_MASK (0xf) +#define MWAIT_SUBSTATE_SIZE (4) + +#define CPUID_MWAIT_LEAF (5) +#define CPUID5_ECX_EXTENSIONS_SUPPORTED (0x1) +#define CPUID5_ECX_INTERRUPT_BREAK (0x2) + +#define MWAIT_ECX_INTERRUPT_BREAK (0x1) + +#define NATIVE_CSTATE_BEYOND_HALT (2) + +int acpi_processor_ffh_cstate_probe(unsigned int cpu, + struct acpi_processor_cx *cx, struct acpi_power_register *reg) +{ + struct cstate_entry_s *percpu_entry; + struct cpuinfo_x86 *c = cpu_data + cpu; + + cpumask_t saved_mask; + int retval; + unsigned int eax, ebx, ecx, edx; + unsigned int edx_part; + unsigned int cstate_type; /* C-state type and not ACPI C-state type */ + unsigned int num_cstate_subtype; + + if (!cpu_cstate_entry || c->cpuid_level < CPUID_MWAIT_LEAF ) + return -1; + + if (reg->bit_offset != NATIVE_CSTATE_BEYOND_HALT) + return -1; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + percpu_entry->states[cx->index].eax = 0; + percpu_entry->states[cx->index].ecx = 0; + + /* Make sure we are running on right CPU */ + saved_mask = current->cpus_allowed; + retval = set_cpus_allowed(current, cpumask_of_cpu(cpu)); + if (retval) + return -1; + + cpuid(CPUID_MWAIT_LEAF, &eax, &ebx, &ecx, &edx); + + /* Check whether this particular cx_type (in CST) is supported or not */ + cstate_type = (cx->address >> MWAIT_SUBSTATE_SIZE) + 1; + edx_part = edx >> (cstate_type * MWAIT_SUBSTATE_SIZE); + num_cstate_subtype = edx_part & MWAIT_SUBSTATE_MASK; + + retval = 0; + if (num_cstate_subtype < (cx->address & MWAIT_SUBSTATE_MASK)) { + retval = -1; + goto out; + } + + /* mwait ecx extensions INTERRUPT_BREAK should be supported for C2/C3 */ + if (!(ecx & CPUID5_ECX_EXTENSIONS_SUPPORTED) || + !(ecx & CPUID5_ECX_INTERRUPT_BREAK)) { + retval = -1; + goto out; + } + percpu_entry->states[cx->index].ecx = MWAIT_ECX_INTERRUPT_BREAK; + + /* Use the hint in CST */ + percpu_entry->states[cx->index].eax = cx->address; + + if (!mwait_supported[cstate_type]) { + mwait_supported[cstate_type] = 1; + printk(KERN_DEBUG "Monitor-Mwait will be used to enter C-%d " + "state\n", cx->type); + } + +out: + set_cpus_allowed(current, saved_mask); + return retval; +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_probe); + +void acpi_processor_ffh_cstate_enter(struct acpi_processor_cx *cx) +{ + unsigned int cpu = smp_processor_id(); + struct cstate_entry_s *percpu_entry; + + percpu_entry = per_cpu_ptr(cpu_cstate_entry, cpu); + mwait_idle_with_hints(percpu_entry->states[cx->index].eax, + percpu_entry->states[cx->index].ecx); +} +EXPORT_SYMBOL_GPL(acpi_processor_ffh_cstate_enter); + +static int __init ffh_cstate_init(void) +{ + struct cpuinfo_x86 *c = &boot_cpu_data; + if (c->x86_vendor != X86_VENDOR_INTEL) + return -1; + + cpu_cstate_entry = alloc_percpu(struct cstate_entry_s); + return 0; +} + +static void __exit ffh_cstate_exit(void) +{ + if (cpu_cstate_entry) { + free_percpu(cpu_cstate_entry); + cpu_cstate_entry = NULL; + } +} + +arch_initcall(ffh_cstate_init); +__exitcall(ffh_cstate_exit); diff --git a/arch/i386/kernel/acpi/earlyquirk.c b/arch/i386/kernel/acpi/earlyquirk.c index fe799b11ac0..c9841692bb7 100644 --- a/arch/i386/kernel/acpi/earlyquirk.c +++ b/arch/i386/kernel/acpi/earlyquirk.c @@ -27,11 +27,17 @@ static int __init check_bridge(int vendor, int device) #ifdef CONFIG_ACPI /* According to Nvidia all timer overrides are bogus unless HPET is enabled. */ - if (vendor == PCI_VENDOR_ID_NVIDIA) { + if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) { nvidia_hpet_detected = 0; acpi_table_parse(ACPI_HPET, nvidia_hpet_check); if (nvidia_hpet_detected == 0) { acpi_skip_timer_override = 1; + printk(KERN_INFO "Nvidia board " + "detected. Ignoring ACPI " + "timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); + } } #endif diff --git a/arch/i386/kernel/alternative.c b/arch/i386/kernel/alternative.c index 28ab8064976..583c238e17f 100644 --- a/arch/i386/kernel/alternative.c +++ b/arch/i386/kernel/alternative.c @@ -344,6 +344,7 @@ void alternatives_smp_switch(int smp) void __init alternative_instructions(void) { + unsigned long flags; if (no_replacement) { printk(KERN_INFO "(SMP-)alternatives turned off\n"); free_init_pages("SMP alternatives", @@ -351,6 +352,8 @@ void __init alternative_instructions(void) (unsigned long)__smp_alt_end); return; } + + local_irq_save(flags); apply_alternatives(__alt_instructions, __alt_instructions_end); /* switch to patch-once-at-boottime-only mode and free the @@ -386,4 +389,5 @@ void __init alternative_instructions(void) alternatives_smp_switch(0); } #endif + local_irq_restore(flags); } diff --git a/arch/i386/kernel/apm.c b/arch/i386/kernel/apm.c index b42f2d914af..a60358fe9a4 100644 --- a/arch/i386/kernel/apm.c +++ b/arch/i386/kernel/apm.c @@ -198,7 +198,7 @@ * (APM) BIOS Interface Specification, Revision 1.2, February 1996. * * [This document is available from Microsoft at: - * http://www.microsoft.com/hwdev/busbios/amp_12.htm] + * http://www.microsoft.com/whdc/archive/amp_12.mspx] */ #include <linux/module.h> @@ -540,11 +540,30 @@ static inline void apm_restore_cpus(cpumask_t mask) * Also, we KNOW that for the non error case of apm_bios_call, there * is no useful data returned in the low order 8 bits of eax. */ -#define APM_DO_CLI \ - if (apm_info.allow_ints) \ - local_irq_enable(); \ - else \ + +static inline unsigned long __apm_irq_save(void) +{ + unsigned long flags; + local_save_flags(flags); + if (apm_info.allow_ints) { + if (irqs_disabled_flags(flags)) + local_irq_enable(); + } else + local_irq_disable(); + + return flags; +} + +#define apm_irq_save(flags) \ + do { flags = __apm_irq_save(); } while (0) + +static inline void apm_irq_restore(unsigned long flags) +{ + if (irqs_disabled_flags(flags)) local_irq_disable(); + else if (irqs_disabled()) + local_irq_enable(); +} #ifdef APM_ZERO_SEGS # define APM_DECL_SEGS \ @@ -596,12 +615,11 @@ static u8 apm_bios_call(u32 func, u32 ebx_in, u32 ecx_in, save_desc_40 = gdt[0x40 / 8]; gdt[0x40 / 8] = bad_bios_desc; - local_save_flags(flags); - APM_DO_CLI; + apm_irq_save(flags); APM_DO_SAVE_SEGS; apm_bios_call_asm(func, ebx_in, ecx_in, eax, ebx, ecx, edx, esi); APM_DO_RESTORE_SEGS; - local_irq_restore(flags); + apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); apm_restore_cpus(cpus); @@ -640,12 +658,11 @@ static u8 apm_bios_call_simple(u32 func, u32 ebx_in, u32 ecx_in, u32 *eax) save_desc_40 = gdt[0x40 / 8]; gdt[0x40 / 8] = bad_bios_desc; - local_save_flags(flags); - APM_DO_CLI; + apm_irq_save(flags); APM_DO_SAVE_SEGS; error = apm_bios_call_simple_asm(func, ebx_in, ecx_in, eax); APM_DO_RESTORE_SEGS; - local_irq_restore(flags); + apm_irq_restore(flags); gdt[0x40 / 8] = save_desc_40; put_cpu(); apm_restore_cpus(cpus); diff --git a/arch/i386/kernel/cpu/mcheck/therm_throt.c b/arch/i386/kernel/cpu/mcheck/therm_throt.c index 4f43047de40..2d8703b7ce6 100644 --- a/arch/i386/kernel/cpu/mcheck/therm_throt.c +++ b/arch/i386/kernel/cpu/mcheck/therm_throt.c @@ -110,17 +110,15 @@ int therm_throt_process(int curr) #ifdef CONFIG_SYSFS /* Add/Remove thermal_throttle interface for CPU device */ -static __cpuinit int thermal_throttle_add_dev(struct sys_device * sys_dev) +static __cpuinit int thermal_throttle_add_dev(struct sys_device *sys_dev) { - sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group); - return 0; + return sysfs_create_group(&sys_dev->kobj, &thermal_throttle_attr_group); } #ifdef CONFIG_HOTPLUG_CPU -static __cpuinit int thermal_throttle_remove_dev(struct sys_device * sys_dev) +static __cpuinit void thermal_throttle_remove_dev(struct sys_device *sys_dev) { - sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group); - return 0; + return sysfs_remove_group(&sys_dev->kobj, &thermal_throttle_attr_group); } /* Mutex protecting device creation against CPU hotplug */ @@ -133,12 +131,14 @@ static __cpuinit int thermal_throttle_cpu_callback(struct notifier_block *nfb, { unsigned int cpu = (unsigned long)hcpu; struct sys_device *sys_dev; + int err; sys_dev = get_cpu_sysdev(cpu); mutex_lock(&therm_cpu_lock); switch (action) { case CPU_ONLINE: - thermal_throttle_add_dev(sys_dev); + err = thermal_throttle_add_dev(sys_dev); + WARN_ON(err); break; case CPU_DEAD: thermal_throttle_remove_dev(sys_dev); @@ -157,6 +157,7 @@ static struct notifier_block thermal_throttle_cpu_notifier = static __init int thermal_throttle_init_device(void) { unsigned int cpu = 0; + int err; if (!atomic_read(&therm_throt_en)) return 0; @@ -167,8 +168,10 @@ static __init int thermal_throttle_init_device(void) mutex_lock(&therm_cpu_lock); #endif /* connect live CPUs to sysfs */ - for_each_online_cpu(cpu) - thermal_throttle_add_dev(get_cpu_sysdev(cpu)); + for_each_online_cpu(cpu) { + err = thermal_throttle_add_dev(get_cpu_sysdev(cpu)); + WARN_ON(err); + } #ifdef CONFIG_HOTPLUG_CPU mutex_unlock(&therm_cpu_lock); #endif diff --git a/arch/i386/kernel/head.S b/arch/i386/kernel/head.S index be9d883c62c..ca31f18d277 100644 --- a/arch/i386/kernel/head.S +++ b/arch/i386/kernel/head.S @@ -317,7 +317,7 @@ is386: movl $2,%ecx # set MP movl %eax,%gs lldt %ax cld # gcc2 wants the direction flag cleared at all times - pushl %eax # fake return address + pushl $0 # fake return address for unwinder #ifdef CONFIG_SMP movb ready, %cl movb $1, ready diff --git a/arch/i386/kernel/i8253.c b/arch/i386/kernel/i8253.c index 477b24daff5..9a0060b92e3 100644 --- a/arch/i386/kernel/i8253.c +++ b/arch/i386/kernel/i8253.c @@ -109,7 +109,7 @@ static struct clocksource clocksource_pit = { static int __init init_pit_clocksource(void) { - if (num_possible_cpus() > 4) /* PIT does not scale! */ + if (num_possible_cpus() > 1) /* PIT does not scale! */ return 0; clocksource_pit.mult = clocksource_hz2mult(CLOCK_TICK_RATE, 20); diff --git a/arch/i386/kernel/i8259.c b/arch/i386/kernel/i8259.c index d53eafb6daa..62996cd1708 100644 --- a/arch/i386/kernel/i8259.c +++ b/arch/i386/kernel/i8259.c @@ -113,7 +113,8 @@ void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler(irq, &i8259A_chip, handle_level_irq); + set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, + "XT"); enable_irq(irq); } @@ -369,8 +370,8 @@ void __init init_ISA_irqs (void) /* * 16 old-style INTA-cycle interrupts: */ - set_irq_chip_and_handler(i, &i8259A_chip, - handle_level_irq); + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); } else { /* * 'high' PCI IRQs filled in on demand diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c index cd082c36ca0..3b7a63e0ed1 100644 --- a/arch/i386/kernel/io_apic.c +++ b/arch/i386/kernel/io_apic.c @@ -91,6 +91,46 @@ static struct irq_pin_list { int apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); +} + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + * + * Older SiS APIC requires we rewrite the index register + */ +static inline void io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) +{ + volatile struct io_apic *io_apic = io_apic_base(apic); + if (sis_apic_bug) + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + union entry_union { struct { u32 w1, w2; }; struct IO_APIC_route_entry entry; @@ -107,12 +147,34 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) return eu.entry; } +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { unsigned long flags; union entry_union eu; eu.entry = e; spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x10 + 2*pin, eu.w1); io_apic_write(apic, 0x11 + 2*pin, eu.w2); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -234,9 +296,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) /* * Disable it in the IO-APIC irq-routing table: */ - memset(&entry, 0, sizeof(entry)); - entry.mask = 1; - ioapic_write_entry(apic, pin, entry); + ioapic_mask_entry(apic, pin); } static void clear_IO_APIC (void) @@ -1225,11 +1285,13 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) { if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || trigger == IOAPIC_LEVEL) - set_irq_chip_and_handler(irq, &ioapic_chip, - handle_fasteoi_irq); - else - set_irq_chip_and_handler(irq, &ioapic_chip, - handle_edge_irq); + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, "fasteoi"); + else { + irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_edge_irq, "edge"); + } set_intr_gate(vector, interrupt[irq]); } @@ -2235,7 +2297,8 @@ static inline void check_timer(void) printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); disable_8259A_irq(0); - set_irq_chip_and_handler(0, &lapic_chip, handle_fasteoi_irq); + set_irq_chip_and_handler_name(0, &lapic_chip, handle_fasteoi_irq, + "fasteio"); apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ enable_8259A_irq(0); @@ -2541,7 +2604,8 @@ int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev) write_msi_msg(irq, &msg); - set_irq_chip_and_handler(irq, &msi_chip, handle_edge_irq); + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, + "edge"); return 0; } @@ -2562,18 +2626,16 @@ void arch_teardown_msi_irq(unsigned int irq) static void target_ht_irq(unsigned int irq, unsigned int dest) { - u32 low, high; - low = read_ht_irq_low(irq); - high = read_ht_irq_high(irq); + struct ht_irq_msg msg; + fetch_ht_irq_msg(irq, &msg); - low &= ~(HT_IRQ_LOW_DEST_ID_MASK); - high &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + msg.address_lo &= ~(HT_IRQ_LOW_DEST_ID_MASK); + msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); - low |= HT_IRQ_LOW_DEST_ID(dest); - high |= HT_IRQ_HIGH_DEST_ID(dest); + msg.address_lo |= HT_IRQ_LOW_DEST_ID(dest); + msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); - write_ht_irq_low(irq, low); - write_ht_irq_high(irq, high); + write_ht_irq_msg(irq, &msg); } static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) @@ -2594,7 +2656,7 @@ static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) } #endif -static struct hw_interrupt_type ht_irq_chip = { +static struct irq_chip ht_irq_chip = { .name = "PCI-HT", .mask = mask_ht_irq, .unmask = unmask_ht_irq, @@ -2611,7 +2673,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) vector = assign_irq_vector(irq); if (vector >= 0) { - u32 low, high; + struct ht_irq_msg msg; unsigned dest; cpumask_t tmp; @@ -2619,9 +2681,10 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) cpu_set(vector >> 8, tmp); dest = cpu_mask_to_apicid(tmp); - high = HT_IRQ_HIGH_DEST_ID(dest); + msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); - low = HT_IRQ_LOW_BASE | + msg.address_lo = + HT_IRQ_LOW_BASE | HT_IRQ_LOW_DEST_ID(dest) | HT_IRQ_LOW_VECTOR(vector) | ((INT_DEST_MODE == 0) ? @@ -2633,10 +2696,10 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) HT_IRQ_LOW_MT_ARBITRATED) | HT_IRQ_LOW_IRQ_MASKED; - write_ht_irq_low(irq, low); - write_ht_irq_high(irq, high); + write_ht_irq_msg(irq, &msg); - set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq); + set_irq_chip_and_handler_name(irq, &ht_irq_chip, + handle_edge_irq, "edge"); } return vector; } diff --git a/arch/i386/kernel/irq.c b/arch/i386/kernel/irq.c index 8cfc7dbec7b..3201d421090 100644 --- a/arch/i386/kernel/irq.c +++ b/arch/i386/kernel/irq.c @@ -258,7 +258,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %8s", irq_desc[i].chip->name); - seq_printf(p, "-%s", handle_irq_name(irq_desc[i].handle_irq)); + seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/i386/kernel/kprobes.c b/arch/i386/kernel/kprobes.c index d98e44b16fe..fc79e1e859c 100644 --- a/arch/i386/kernel/kprobes.c +++ b/arch/i386/kernel/kprobes.c @@ -361,8 +361,11 @@ no_kprobe: asm volatile ( ".global kretprobe_trampoline\n" "kretprobe_trampoline: \n" " pushf\n" - /* skip cs, eip, orig_eax, es, ds */ - " subl $20, %esp\n" + /* skip cs, eip, orig_eax */ + " subl $12, %esp\n" + " pushl %gs\n" + " pushl %ds\n" + " pushl %es\n" " pushl %eax\n" " pushl %ebp\n" " pushl %edi\n" @@ -373,10 +376,10 @@ no_kprobe: " movl %esp, %eax\n" " call trampoline_handler\n" /* move eflags to cs */ - " movl 48(%esp), %edx\n" - " movl %edx, 44(%esp)\n" + " movl 52(%esp), %edx\n" + " movl %edx, 48(%esp)\n" /* save true return address on eflags */ - " movl %eax, 48(%esp)\n" + " movl %eax, 52(%esp)\n" " popl %ebx\n" " popl %ecx\n" " popl %edx\n" @@ -384,8 +387,8 @@ no_kprobe: " popl %edi\n" " popl %ebp\n" " popl %eax\n" - /* skip eip, orig_eax, es, ds */ - " addl $16, %esp\n" + /* skip eip, orig_eax, es, ds, gs */ + " addl $20, %esp\n" " popf\n" " ret\n"); } @@ -404,6 +407,10 @@ fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) INIT_HLIST_HEAD(&empty_rp); spin_lock_irqsave(&kretprobe_lock, flags); head = kretprobe_inst_table_head(current); + /* fixup registers */ + regs->xcs = __KERNEL_CS; + regs->eip = trampoline_address; + regs->orig_eax = 0xffffffff; /* * It is possible to have multiple instances associated with a given @@ -425,6 +432,7 @@ fastcall void *__kprobes trampoline_handler(struct pt_regs *regs) if (ri->rp && ri->rp->handler){ __get_cpu_var(current_kprobe) = &ri->rp->kp; + get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE; ri->rp->handler(ri, regs); __get_cpu_var(current_kprobe) = NULL; } diff --git a/arch/i386/kernel/microcode.c b/arch/i386/kernel/microcode.c index 9b9479768d5..23f5984d065 100644 --- a/arch/i386/kernel/microcode.c +++ b/arch/i386/kernel/microcode.c @@ -577,7 +577,7 @@ static void microcode_init_cpu(int cpu) set_cpus_allowed(current, cpumask_of_cpu(cpu)); mutex_lock(µcode_mutex); collect_cpu_info(cpu); - if (uci->valid) + if (uci->valid && system_state == SYSTEM_RUNNING) cpu_request_microcode(cpu); mutex_unlock(µcode_mutex); set_cpus_allowed(current, old); @@ -656,14 +656,18 @@ static struct attribute_group mc_attr_group = { static int mc_sysdev_add(struct sys_device *sys_dev) { - int cpu = sys_dev->id; + int err, cpu = sys_dev->id; struct ucode_cpu_info *uci = ucode_cpu_info + cpu; if (!cpu_online(cpu)) return 0; + pr_debug("Microcode:CPU %d added\n", cpu); memset(uci, 0, sizeof(*uci)); - sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + + err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group); + if (err) + return err; microcode_init_cpu(cpu); return 0; diff --git a/arch/i386/kernel/nmi.c b/arch/i386/kernel/nmi.c index 3e8e3adb048..eaafe233a5d 100644 --- a/arch/i386/kernel/nmi.c +++ b/arch/i386/kernel/nmi.c @@ -219,11 +219,11 @@ static int __init check_nmi_watchdog(void) int cpu; /* Enable NMI watchdog for newer systems. - Actually it should be safe for most systems before 2004 too except - for some IBM systems that corrupt registers when NMI happens - during SMM. Unfortunately we don't have more exact information - on these and use this coarse check. */ - if (nmi_watchdog == NMI_DEFAULT && dmi_get_year(DMI_BIOS_DATE) >= 2004) + Probably safe on most older systems too, but let's be careful. + IBM ThinkPads use INT10 inside SMM and that allows early NMI inside SMM + which hangs the system. Disable watchdog for all thinkpads */ + if (nmi_watchdog == NMI_DEFAULT && dmi_get_year(DMI_BIOS_DATE) >= 2004 && + !dmi_name_in_vendors("ThinkPad")) nmi_watchdog = NMI_LOCAL_APIC; if ((nmi_watchdog == NMI_NONE) || (nmi_watchdog == NMI_DEFAULT)) diff --git a/arch/i386/kernel/process.c b/arch/i386/kernel/process.c index b0a07801d9d..dd53c58f64f 100644 --- a/arch/i386/kernel/process.c +++ b/arch/i386/kernel/process.c @@ -205,7 +205,7 @@ void cpu_idle(void) void cpu_idle_wait(void) { unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map; + cpumask_t map, tmp = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); put_cpu(); @@ -227,6 +227,8 @@ void cpu_idle_wait(void) } cpus_and(map, map, cpu_online_map); } while (!cpus_empty(map)); + + set_cpus_allowed(current, tmp); } EXPORT_SYMBOL_GPL(cpu_idle_wait); @@ -236,20 +238,28 @@ EXPORT_SYMBOL_GPL(cpu_idle_wait); * We execute MONITOR against need_resched and enter optimized wait state * through MWAIT. Whenever someone changes need_resched, we would be woken * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. */ -static void mwait_idle(void) +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { - local_irq_enable(); - - while (!need_resched()) { + if (!need_resched()) { __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); - if (need_resched()) - break; - __mwait(0, 0); + if (!need_resched()) + __mwait(eax, ecx); } } +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + local_irq_enable(); + while (!need_resched()) + mwait_idle_with_hints(0, 0); +} + void __devinit select_idle_routine(const struct cpuinfo_x86 *c) { if (cpu_has(c, X86_FEATURE_MWAIT)) { @@ -328,7 +338,6 @@ extern void kernel_thread_helper(void); int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) { struct pt_regs regs; - int err; memset(®s, 0, sizeof(regs)); @@ -343,10 +352,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) regs.eflags = X86_EFLAGS_IF | X86_EFLAGS_SF | X86_EFLAGS_PF | 0x2; /* Ok, create the new process.. */ - err = do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); - if (err == 0) /* terminate kernel stack */ - task_pt_regs(current)->eip = 0; - return err; + return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } EXPORT_SYMBOL(kernel_thread); diff --git a/arch/i386/kernel/setup.c b/arch/i386/kernel/setup.c index 000cf03751f..141041dde74 100644 --- a/arch/i386/kernel/setup.c +++ b/arch/i386/kernel/setup.c @@ -846,7 +846,7 @@ efi_find_max_pfn(unsigned long start, unsigned long end, void *arg) static int __init efi_memory_present_wrapper(unsigned long start, unsigned long end, void *arg) { - memory_present(0, start, end); + memory_present(0, PFN_UP(start), PFN_DOWN(end)); return 0; } @@ -1083,16 +1083,15 @@ static unsigned long __init setup_memory(void) void __init zone_sizes_init(void) { + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; #ifdef CONFIG_HIGHMEM - unsigned long max_zone_pfns[MAX_NR_ZONES] = { - virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, - max_low_pfn, - highend_pfn}; + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; add_active_range(0, 0, highend_pfn); #else - unsigned long max_zone_pfns[MAX_NR_ZONES] = { - virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, - max_low_pfn}; add_active_range(0, 0, max_low_pfn); #endif diff --git a/arch/i386/kernel/syscall_table.S b/arch/i386/kernel/syscall_table.S index 7e639f78b0b..2697e9210e9 100644 --- a/arch/i386/kernel/syscall_table.S +++ b/arch/i386/kernel/syscall_table.S @@ -318,3 +318,4 @@ ENTRY(sys_call_table) .long sys_vmsplice .long sys_move_pages .long sys_getcpu + .long sys_epoll_pwait diff --git a/arch/i386/kernel/traps.c b/arch/i386/kernel/traps.c index 00489b706d2..fe9c5e8e7e6 100644 --- a/arch/i386/kernel/traps.c +++ b/arch/i386/kernel/traps.c @@ -129,15 +129,19 @@ static inline unsigned long print_context_stack(struct thread_info *tinfo, #ifdef CONFIG_FRAME_POINTER while (valid_stack_ptr(tinfo, (void *)ebp)) { + unsigned long new_ebp; addr = *(unsigned long *)(ebp + 4); ops->address(data, addr); /* * break out of recursive entries (such as - * end_of_stack_stop_unwind_function): + * end_of_stack_stop_unwind_function). Also, + * we can never allow a frame pointer to + * move downwards! */ - if (ebp == *(unsigned long *)ebp) + new_ebp = *(unsigned long *)ebp; + if (new_ebp <= ebp) break; - ebp = *(unsigned long *)ebp; + ebp = new_ebp; } #else while (valid_stack_ptr(tinfo, stack)) { diff --git a/arch/i386/kernel/tsc.c b/arch/i386/kernel/tsc.c index b8fa0a8b2e4..fbc95828cd7 100644 --- a/arch/i386/kernel/tsc.c +++ b/arch/i386/kernel/tsc.c @@ -349,8 +349,8 @@ static int tsc_update_callback(void) int change = 0; /* check to see if we should switch to the safe clocksource: */ - if (clocksource_tsc.rating != 50 && check_tsc_unstable()) { - clocksource_tsc.rating = 50; + if (clocksource_tsc.rating != 0 && check_tsc_unstable()) { + clocksource_tsc.rating = 0; clocksource_reselect(); change = 1; } @@ -461,7 +461,7 @@ static int __init init_tsc_clocksource(void) clocksource_tsc.shift); /* lower the rating if we already know its unstable: */ if (check_tsc_unstable()) - clocksource_tsc.rating = 50; + clocksource_tsc.rating = 0; init_timer(&verify_tsc_freq_timer); verify_tsc_freq_timer.function = verify_tsc_freq; diff --git a/arch/i386/kernel/vmlinux.lds.S b/arch/i386/kernel/vmlinux.lds.S index 1e7ac1c44dd..c6f84a0322b 100644 --- a/arch/i386/kernel/vmlinux.lds.S +++ b/arch/i386/kernel/vmlinux.lds.S @@ -51,6 +51,7 @@ SECTIONS __tracedata_end = .; /* writeable */ + . = ALIGN(4096); .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */ *(.data) CONSTRUCTORS @@ -126,13 +127,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/i386/lib/usercopy.c b/arch/i386/lib/usercopy.c index 08502fc6d0c..d22cfc9d656 100644 --- a/arch/i386/lib/usercopy.c +++ b/arch/i386/lib/usercopy.c @@ -9,6 +9,7 @@ #include <linux/highmem.h> #include <linux/blkdev.h> #include <linux/module.h> +#include <linux/backing-dev.h> #include <asm/uaccess.h> #include <asm/mmx.h> @@ -179,7 +180,7 @@ __clear_user(void __user *to, unsigned long n) EXPORT_SYMBOL(__clear_user); /** - * strlen_user: - Get the size of a string in user space. + * strnlen_user: - Get the size of a string in user space. * @s: The string to measure. * @n: The maximum valid length * @@ -741,7 +742,7 @@ survive: if (retval == -ENOMEM && is_init(current)) { up_read(¤t->mm->mmap_sem); - blk_congestion_wait(WRITE, HZ/50); + congestion_wait(WRITE, HZ/50); goto survive; } diff --git a/arch/i386/mach-visws/visws_apic.c b/arch/i386/mach-visws/visws_apic.c index 07097ed4889..38c2b13124d 100644 --- a/arch/i386/mach-visws/visws_apic.c +++ b/arch/i386/mach-visws/visws_apic.c @@ -122,7 +122,7 @@ static void end_cobalt_irq(unsigned int irq) spin_unlock_irqrestore(&cobalt_lock, flags); } -static struct hw_interrupt_type cobalt_irq_type = { +static struct irq_chip cobalt_irq_type = { .typename = "Cobalt-APIC", .startup = startup_cobalt_irq, .shutdown = disable_cobalt_irq, @@ -159,7 +159,7 @@ static void end_piix4_master_irq(unsigned int irq) spin_unlock_irqrestore(&cobalt_lock, flags); } -static struct hw_interrupt_type piix4_master_irq_type = { +static struct irq_chip piix4_master_irq_type = { .typename = "PIIX4-master", .startup = startup_piix4_master_irq, .ack = ack_cobalt_irq, @@ -167,9 +167,8 @@ static struct hw_interrupt_type piix4_master_irq_type = { }; -static struct hw_interrupt_type piix4_virtual_irq_type = { +static struct irq_chip piix4_virtual_irq_type = { .typename = "PIIX4-virtual", - .startup = startup_8259A_irq, .shutdown = disable_8259A_irq, .enable = enable_8259A_irq, .disable = disable_8259A_irq, diff --git a/arch/i386/mach-voyager/voyager_basic.c b/arch/i386/mach-voyager/voyager_basic.c index c639d30d8bd..8fe7e4593d5 100644 --- a/arch/i386/mach-voyager/voyager_basic.c +++ b/arch/i386/mach-voyager/voyager_basic.c @@ -44,7 +44,7 @@ struct voyager_SUS *voyager_SUS = NULL; #ifdef CONFIG_SMP static void -voyager_dump(int dummy1, struct pt_regs *dummy2, struct tty_struct *dummy3) +voyager_dump(int dummy1, struct tty_struct *dummy3) { /* get here via a sysrq */ voyager_smp_dump(); @@ -166,7 +166,7 @@ voyager_memory_detect(int region, __u32 *start, __u32 *length) * off the timer tick to the SMP code, since the VIC doesn't have an * internal timer (The QIC does, but that's another story). */ void -voyager_timer_interrupt(struct pt_regs *regs) +voyager_timer_interrupt(void) { if((jiffies & 0x3ff) == 0) { @@ -202,7 +202,7 @@ voyager_timer_interrupt(struct pt_regs *regs) } } #ifdef CONFIG_SMP - smp_vic_timer_interrupt(regs); + smp_vic_timer_interrupt(); #endif } diff --git a/arch/i386/mach-voyager/voyager_smp.c b/arch/i386/mach-voyager/voyager_smp.c index d42422fc4af..f3fea2ad50f 100644 --- a/arch/i386/mach-voyager/voyager_smp.c +++ b/arch/i386/mach-voyager/voyager_smp.c @@ -85,8 +85,8 @@ static int ack_QIC_CPI(__u8 cpi); static void ack_special_QIC_CPI(__u8 cpi); static void ack_VIC_CPI(__u8 cpi); static void send_CPI_allbutself(__u8 cpi); -static void enable_vic_irq(unsigned int irq); -static void disable_vic_irq(unsigned int irq); +static void mask_vic_irq(unsigned int irq); +static void unmask_vic_irq(unsigned int irq); static unsigned int startup_vic_irq(unsigned int irq); static void enable_local_vic_irq(unsigned int irq); static void disable_local_vic_irq(unsigned int irq); @@ -205,15 +205,12 @@ ack_CPI(__u8 cpi) /* The VIC IRQ descriptors -- these look almost identical to the * 8259 IRQs except that masks and things must be kept per processor */ -static struct hw_interrupt_type vic_irq_type = { - .typename = "VIC-level", - .startup = startup_vic_irq, - .shutdown = disable_vic_irq, - .enable = enable_vic_irq, - .disable = disable_vic_irq, - .ack = before_handle_vic_irq, - .end = after_handle_vic_irq, - .set_affinity = set_vic_irq_affinity, +static struct irq_chip vic_chip = { + .name = "VIC", + .startup = startup_vic_irq, + .mask = mask_vic_irq, + .unmask = unmask_vic_irq, + .set_affinity = set_vic_irq_affinity, }; /* used to count up as CPUs are brought on line (starts at 0) */ @@ -1144,9 +1141,9 @@ smp_apic_timer_interrupt(struct pt_regs *regs) fastcall void smp_qic_timer_interrupt(struct pt_regs *regs) { - ack_QIC_CPI(QIC_TIMER_CPI); struct pt_regs *old_regs = set_irq_regs(regs); - wrapper_smp_local_timer_interrupt(void); + ack_QIC_CPI(QIC_TIMER_CPI); + wrapper_smp_local_timer_interrupt(); set_irq_regs(old_regs); } @@ -1270,12 +1267,10 @@ smp_send_stop(void) /* this function is triggered in time.c when a clock tick fires * we need to re-broadcast the tick to all CPUs */ void -smp_vic_timer_interrupt(struct pt_regs *regs) +smp_vic_timer_interrupt(void) { - struct pt_regs *old_regs = set_irq_regs(regs); send_CPI_allbutself(VIC_TIMER_CPI); smp_local_timer_interrupt(); - set_irq_regs(old_regs); } /* local (per CPU) timer interrupt. It does both profiling and @@ -1310,7 +1305,7 @@ smp_local_timer_interrupt(void) per_cpu(prof_counter, cpu); } - update_process_times(user_mode_vm(irq_regs)); + update_process_times(user_mode_vm(get_irq_regs())); } if( ((1<<cpu) & voyager_extended_vic_processors) == 0) @@ -1397,6 +1392,17 @@ setup_profiling_timer(unsigned int multiplier) return 0; } +/* This is a bit of a mess, but forced on us by the genirq changes + * there's no genirq handler that really does what voyager wants + * so hack it up with the simple IRQ handler */ +static void fastcall +handle_vic_irq(unsigned int irq, struct irq_desc *desc) +{ + before_handle_vic_irq(irq); + handle_simple_irq(irq, desc); + after_handle_vic_irq(irq); +} + /* The CPIs are handled in the per cpu 8259s, so they must be * enabled to be received: FIX: enabling the CPIs in the early @@ -1433,7 +1439,7 @@ smp_intr_init(void) * This is for later: first 16 correspond to PC IRQs; next 16 * are Primary MC IRQs and final 16 are Secondary MC IRQs */ for(i = 0; i < 48; i++) - irq_desc[i].chip = &vic_irq_type; + set_irq_chip_and_handler(i, &vic_chip, handle_vic_irq); } /* send a CPI at level cpi to a set of cpus in cpuset (set 1 bit per @@ -1531,7 +1537,7 @@ ack_VIC_CPI(__u8 cpi) static unsigned int startup_vic_irq(unsigned int irq) { - enable_vic_irq(irq); + unmask_vic_irq(irq); return 0; } @@ -1558,7 +1564,7 @@ startup_vic_irq(unsigned int irq) * adjust their masks accordingly. */ static void -enable_vic_irq(unsigned int irq) +unmask_vic_irq(unsigned int irq) { /* linux doesn't to processor-irq affinity, so enable on * all CPUs we know about */ @@ -1567,7 +1573,7 @@ enable_vic_irq(unsigned int irq) __u32 processorList = 0; unsigned long flags; - VDEBUG(("VOYAGER: enable_vic_irq(%d) CPU%d affinity 0x%lx\n", + VDEBUG(("VOYAGER: unmask_vic_irq(%d) CPU%d affinity 0x%lx\n", irq, cpu, cpu_irq_affinity[cpu])); spin_lock_irqsave(&vic_irq_lock, flags); for_each_online_cpu(real_cpu) { @@ -1591,7 +1597,7 @@ enable_vic_irq(unsigned int irq) } static void -disable_vic_irq(unsigned int irq) +mask_vic_irq(unsigned int irq) { /* lazy disable, do nothing */ } @@ -1819,7 +1825,7 @@ set_vic_irq_affinity(unsigned int irq, cpumask_t mask) * disabled again as it comes in (voyager lazy disable). If * the affinity map is tightened to disable the interrupt on a * cpu, it will be pushed off when it comes in */ - enable_vic_irq(irq); + unmask_vic_irq(irq); } static void diff --git a/arch/i386/mm/discontig.c b/arch/i386/mm/discontig.c index 455597db84d..ddbdb0336f2 100644 --- a/arch/i386/mm/discontig.c +++ b/arch/i386/mm/discontig.c @@ -356,11 +356,12 @@ void __init numa_kva_reserve(void) void __init zone_sizes_init(void) { int nid; - unsigned long max_zone_pfns[MAX_NR_ZONES] = { - virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT, - max_low_pfn, - highend_pfn - }; + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = + virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; + max_zone_pfns[ZONE_NORMAL] = max_low_pfn; + max_zone_pfns[ZONE_HIGHMEM] = highend_pfn; /* If SRAT has not registered memory, register it now */ if (find_max_pfn_with_active_regions() == 0) { diff --git a/arch/i386/pci/common.c b/arch/i386/pci/common.c index 68bce194e68..cdfcf971098 100644 --- a/arch/i386/pci/common.c +++ b/arch/i386/pci/common.c @@ -20,6 +20,7 @@ unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 | PCI_PROBE_MMCONF; +int pci_bf_sort; int pci_routeirq; int pcibios_last_bus = -1; unsigned long pirq_table_addr; @@ -118,6 +119,20 @@ void __devinit pcibios_fixup_bus(struct pci_bus *b) } /* + * Only use DMI information to set this if nothing was passed + * on the kernel command line (which was parsed earlier). + */ + +static int __devinit set_bf_sort(struct dmi_system_id *d) +{ + if (pci_bf_sort == pci_bf_sort_default) { + pci_bf_sort = pci_dmi_bf; + printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident); + } + return 0; +} + +/* * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus) */ #ifdef __i386__ @@ -130,11 +145,11 @@ static int __devinit assign_all_busses(struct dmi_system_id *d) } #endif +static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { +#ifdef __i386__ /* * Laptops which need pci=assign-busses to see Cardbus cards */ -static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { -#ifdef __i386__ { .callback = assign_all_busses, .ident = "Samsung X20 Laptop", @@ -144,6 +159,38 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { }, }, #endif /* __i386__ */ + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 1955", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2900", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"), + }, + }, + { + .callback = set_bf_sort, + .ident = "Dell PowerEdge 2950", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell"), + DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"), + }, + }, {} }; @@ -189,6 +236,8 @@ static int __init pcibios_init(void) pcibios_resource_survey(); + if (pci_bf_sort >= pci_force_bf) + pci_sort_breadthfirst(); #ifdef CONFIG_PCI_BIOS if ((pci_probe & PCI_BIOS_SORT) && !(pci_probe & PCI_NO_SORT)) pcibios_sort(); @@ -203,6 +252,12 @@ char * __devinit pcibios_setup(char *str) if (!strcmp(str, "off")) { pci_probe = 0; return NULL; + } else if (!strcmp(str, "bfsort")) { + pci_bf_sort = pci_force_bf; + return NULL; + } else if (!strcmp(str, "nobfsort")) { + pci_bf_sort = pci_force_nobf; + return NULL; } #ifdef CONFIG_PCI_BIOS else if (!strcmp(str, "bios")) { @@ -288,7 +343,6 @@ int pcibios_enable_device(struct pci_dev *dev, int mask) void pcibios_disable_device (struct pci_dev *dev) { - pcibios_disable_resources(dev); if (pcibios_disable_irq) pcibios_disable_irq(dev); } diff --git a/arch/i386/pci/fixup.c b/arch/i386/pci/fixup.c index b60d7e8689e..c1949ff38d6 100644 --- a/arch/i386/pci/fixup.c +++ b/arch/i386/pci/fixup.c @@ -348,8 +348,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MCH_PC1, pcie_r * From information provided by "Jon Smirl" <jonsmirl@gmail.com> * * The standard boot ROM sequence for an x86 machine uses the BIOS - * to select an initial video card for boot display. This boot video - * card will have it's BIOS copied to C0000 in system RAM. + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. * IORESOURCE_ROM_SHADOW is used to associate the boot video * card with this copy. On laptops this copy has to be used since * the main ROM may be compressed or combined with another image. @@ -371,7 +371,17 @@ static void __devinit pci_fixup_video(struct pci_dev *pdev) bus = pdev->bus; while (bus) { bridge = bus->self; - if (bridge) { + + /* + * From information provided by + * "David Miller" <davem@davemloft.net> + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, &config); if (!(config & PCI_BRIDGE_CTL_VGA)) diff --git a/arch/i386/pci/i386.c b/arch/i386/pci/i386.c index 10154a2cac6..98580292f0d 100644 --- a/arch/i386/pci/i386.c +++ b/arch/i386/pci/i386.c @@ -242,15 +242,6 @@ int pcibios_enable_resources(struct pci_dev *dev, int mask) return 0; } -void pcibios_disable_resources(struct pci_dev *dev) -{ - u16 cmd; - - pci_read_config_word(dev, PCI_COMMAND, &cmd); - cmd &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - pci_write_config_word(dev, PCI_COMMAND, cmd); -} - /* * If we set up a device for bus mastering, we need to check the latency * timer as certain crappy BIOSes forget to set it properly. diff --git a/arch/i386/pci/irq.c b/arch/i386/pci/irq.c index dbc4aae9195..69163998ade 100644 --- a/arch/i386/pci/irq.c +++ b/arch/i386/pci/irq.c @@ -255,13 +255,13 @@ static int pirq_via_set(struct pci_dev *router, struct pci_dev *dev, int pirq, i */ static int pirq_via586_get(struct pci_dev *router, struct pci_dev *dev, int pirq) { - static const unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; return read_config_nybble(router, 0x55, pirqmap[pirq-1]); } static int pirq_via586_set(struct pci_dev *router, struct pci_dev *dev, int pirq, int irq) { - static const unsigned int pirqmap[4] = { 3, 2, 5, 1 }; + static const unsigned int pirqmap[5] = { 3, 2, 5, 1, 1 }; write_config_nybble(router, 0x55, pirqmap[pirq-1], irq); return 1; } diff --git a/arch/i386/pci/mmconfig.c b/arch/i386/pci/mmconfig.c index d0c3da3aa2a..c6b6d9bbc45 100644 --- a/arch/i386/pci/mmconfig.c +++ b/arch/i386/pci/mmconfig.c @@ -154,38 +154,6 @@ static struct pci_raw_ops pci_mmcfg = { .write = pci_mmcfg_write, }; - -static __init void pci_mmcfg_insert_resources(void) -{ -#define PCI_MMCFG_RESOURCE_NAME_LEN 19 - int i; - struct resource *res; - char *names; - unsigned num_buses; - - res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), - pci_mmcfg_config_num, GFP_KERNEL); - - if (!res) { - printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); - return; - } - - names = (void *)&res[pci_mmcfg_config_num]; - for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - num_buses = pci_mmcfg_config[i].end_bus_number - - pci_mmcfg_config[i].start_bus_number + 1; - res->name = names; - snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", - pci_mmcfg_config[i].pci_segment_group_number); - res->start = pci_mmcfg_config[i].base_address; - res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - names += PCI_MMCFG_RESOURCE_NAME_LEN; - } -} - /* K8 systems have some devices (typically in the builtin northbridge) that are only accessible using type1 Normally this can be expressed in the MCFG by not listing them @@ -222,8 +190,6 @@ static __init void unreachable_devices(void) } } - - void __init pci_mmcfg_init(int type) { if ((pci_probe & PCI_PROBE_MMCONF) == 0) @@ -251,5 +217,4 @@ void __init pci_mmcfg_init(int type) pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; unreachable_devices(); - pci_mmcfg_insert_resources(); } diff --git a/arch/i386/pci/pci.h b/arch/i386/pci/pci.h index 1814f74569c..a0a25180b61 100644 --- a/arch/i386/pci/pci.h +++ b/arch/i386/pci/pci.h @@ -30,13 +30,19 @@ extern unsigned int pci_probe; extern unsigned long pirq_table_addr; +enum pci_bf_sort_state { + pci_bf_sort_default, + pci_force_nobf, + pci_force_bf, + pci_dmi_bf, +}; + /* pci-i386.c */ extern unsigned int pcibios_max_latency; void pcibios_resource_survey(void); int pcibios_enable_resources(struct pci_dev *, int); -void pcibios_disable_resources(struct pci_dev *); /* pci-pc.c */ diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 70f7eb9fed3..683b12c6f76 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -341,6 +341,7 @@ config NUMA bool "NUMA support" depends on !IA64_HP_SIM && !FLATMEM default y if IA64_SGI_SN2 + select ACPI_NUMA if ACPI help Say Y to compile the kernel to support NUMA (Non-Uniform Memory Access). This option is for configuring high-end multiprocessor @@ -483,6 +484,15 @@ source "net/Kconfig" source "drivers/Kconfig" +config MSPEC + tristate "Memory special operations driver" + depends on IA64 + select IA64_UNCACHED_ALLOCATOR + help + If you have an ia64 and you want to enable memory special + operations support (formerly known as fetchop), say Y here, + otherwise say N. + source "fs/Kconfig" source "lib/Kconfig" diff --git a/arch/ia64/configs/sn2_defconfig b/arch/ia64/configs/sn2_defconfig index 0f14a82b856..64e951de4e5 100644 --- a/arch/ia64/configs/sn2_defconfig +++ b/arch/ia64/configs/sn2_defconfig @@ -1,8 +1,9 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17-rc3 -# Thu Apr 27 11:48:23 2006 +# Linux kernel version: 2.6.19-rc1 +# Mon Oct 9 10:53:59 2006 # +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # Code maturity level options @@ -18,16 +19,22 @@ CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +CONFIG_TASKSTATS=y +# CONFIG_TASK_DELAY_ACCT is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_CPUSETS=y CONFIG_RELAY=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_TASK_XACCT=y +CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -40,6 +47,8 @@ CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -58,6 +67,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -89,7 +99,7 @@ CONFIG_EFI=y CONFIG_GENERIC_IOMAP=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_IA64_UNCACHED_ALLOCATOR=y -CONFIG_DMA_IS_DMA32=y +CONFIG_AUDIT_ARCH=y # CONFIG_IA64_GENERIC is not set # CONFIG_IA64_DIG is not set # CONFIG_IA64_HP_ZX1 is not set @@ -116,6 +126,7 @@ CONFIG_FORCE_MAX_ZONEORDER=17 CONFIG_SMP=y CONFIG_NR_CPUS=1024 # CONFIG_HOTPLUG_CPU is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_SCHED_SMT=y CONFIG_PREEMPT=y CONFIG_SELECT_MEMORY_MODEL=y @@ -128,6 +139,7 @@ CONFIG_NEED_MULTIPLE_NODES=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y +CONFIG_RESOURCES_64BIT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_DISCONTIGMEM_ENABLE=y CONFIG_ARCH_FLATMEM_ENABLE=y @@ -135,15 +147,24 @@ CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y CONFIG_NUMA=y CONFIG_NODES_SHIFT=10 +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_VIRTUAL_MEM_MAP=y CONFIG_HOLES_IN_ZONE=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y CONFIG_IA32_SUPPORT=y CONFIG_COMPAT=y CONFIG_IA64_MCA_RECOVERY=y CONFIG_PERFMON=y CONFIG_IA64_PALINFO=y CONFIG_SGI_SN=y +# CONFIG_IA64_ESI is not set + +# +# SN Devices +# +CONFIG_SGI_IOC4=y +CONFIG_SGI_IOC3=y # # Firmware Drivers @@ -159,6 +180,7 @@ CONFIG_BINFMT_ELF=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set +# CONFIG_PM_SYSFS_DEPRECATED is not set # # ACPI (Advanced Configuration and Power Interface) Support @@ -166,6 +188,7 @@ CONFIG_PM=y CONFIG_ACPI=y # CONFIG_ACPI_BUTTON is not set # CONFIG_ACPI_FAN is not set +# CONFIG_ACPI_DOCK is not set # CONFIG_ACPI_PROCESSOR is not set CONFIG_ACPI_NUMA=y CONFIG_ACPI_BLACKLIST_YEAR=0 @@ -185,7 +208,12 @@ CONFIG_ACPI_SYSTEM=y # CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +# CONFIG_HOTPLUG_PCI_PCIE_POLL_EVENT_MODE is not set +CONFIG_PCIEAER=y # CONFIG_PCI_MSI is not set +# CONFIG_PCI_MULTITHREAD_PROBE is not set # CONFIG_PCI_DEBUG is not set # @@ -215,6 +243,9 @@ CONFIG_NET=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -231,19 +262,31 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_IPV6_TUNNEL is not set +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -269,7 +312,6 @@ CONFIG_IPV6=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -298,6 +340,7 @@ CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_DEBUG_DRIVER is not set +# CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker @@ -335,6 +378,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m @@ -381,6 +425,7 @@ CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_BLK_DEV_CS5530 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set # CONFIG_BLK_DEV_IT821X is not set @@ -404,6 +449,7 @@ CONFIG_IDEDMA_AUTO=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -425,12 +471,14 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m CONFIG_SCSI_SAS_ATTRS=y +CONFIG_SCSI_SAS_LIBSAS=y +# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # # SCSI low-level drivers @@ -443,46 +491,82 @@ CONFIG_ISCSI_TCP=m # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -CONFIG_SCSI_SATA=y -# CONFIG_SCSI_SATA_AHCI is not set -# CONFIG_SCSI_SATA_SVW is not set -# CONFIG_SCSI_ATA_PIIX is not set -# CONFIG_SCSI_SATA_MV is not set -# CONFIG_SCSI_SATA_NV is not set -# CONFIG_SCSI_PDC_ADMA is not set -# CONFIG_SCSI_SATA_QSTOR is not set -# CONFIG_SCSI_SATA_PROMISE is not set -# CONFIG_SCSI_SATA_SX4 is not set -# CONFIG_SCSI_SATA_SIL is not set -# CONFIG_SCSI_SATA_SIL24 is not set -# CONFIG_SCSI_SATA_SIS is not set -# CONFIG_SCSI_SATA_ULI is not set -# CONFIG_SCSI_SATA_VIA is not set -CONFIG_SCSI_SATA_VITESSE=y +# CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set CONFIG_SCSI_QLOGIC_1280=y CONFIG_SCSI_QLA_FC=y -CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE=y -# CONFIG_SCSI_QLA21XX is not set -CONFIG_SCSI_QLA22XX=y -CONFIG_SCSI_QLA2300=y -CONFIG_SCSI_QLA2322=y -# CONFIG_SCSI_QLA24XX is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +CONFIG_SATA_VITESSE=y +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# # Multi-device support (RAID and LVM) # CONFIG_MD=y @@ -491,12 +575,12 @@ CONFIG_MD_LINEAR=y CONFIG_MD_RAID0=y CONFIG_MD_RAID1=y # CONFIG_MD_RAID10 is not set -CONFIG_MD_RAID5=y +CONFIG_MD_RAID456=y # CONFIG_MD_RAID5_RESHAPE is not set -# CONFIG_MD_RAID6 is not set CONFIG_MD_MULTIPATH=y # CONFIG_MD_FAULTY is not set CONFIG_BLK_DEV_DM=y +# CONFIG_DM_DEBUG is not set CONFIG_DM_CRYPT=m CONFIG_DM_SNAPSHOT=m CONFIG_DM_MIRROR=m @@ -563,6 +647,7 @@ CONFIG_NETDEVICES=y # CONFIG_SK98LIN is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -571,6 +656,7 @@ CONFIG_CHELSIO_T1=m # CONFIG_IXGB is not set CONFIG_S2IO=m # CONFIG_S2IO_NAPI is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices @@ -612,6 +698,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -646,6 +733,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -659,10 +747,12 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_N_HDLC is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set +# CONFIG_RIO is not set # CONFIG_STALDRV is not set CONFIG_SGI_SNSC=y CONFIG_SGI_TIOCX=y CONFIG_SGI_MBCS=m +CONFIG_MSPEC=y # # Serial drivers @@ -701,6 +791,7 @@ CONFIG_EFI_RTC=y # Ftape, the floppy tape device driver # CONFIG_AGP=y +# CONFIG_AGP_SIS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_SGI_TIOCA=y # CONFIG_DRM is not set @@ -730,7 +821,6 @@ CONFIG_MMTIMER=y # # Dallas's 1-wire bus # -# CONFIG_W1 is not set # # Hardware Monitoring support @@ -741,6 +831,7 @@ CONFIG_MMTIMER=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices @@ -756,6 +847,7 @@ CONFIG_MMTIMER=y # # Graphics support # +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # @@ -764,6 +856,7 @@ CONFIG_MMTIMER=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -794,6 +887,7 @@ CONFIG_USB=m CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -843,6 +937,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -874,15 +969,18 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set @@ -919,18 +1017,15 @@ CONFIG_USB_MON=y CONFIG_INFINIBAND=m # CONFIG_INFINIBAND_USER_MAD is not set CONFIG_INFINIBAND_USER_ACCESS=m +CONFIG_INFINIBAND_ADDR_TRANS=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y +# CONFIG_INFINIBAND_AMSO1100 is not set CONFIG_INFINIBAND_IPOIB=m CONFIG_INFINIBAND_IPOIB_DEBUG=y # CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set CONFIG_INFINIBAND_SRP=m - -# -# SN Devices -# -CONFIG_SGI_IOC4=y -CONFIG_SGI_IOC3=y +# CONFIG_INFINIBAND_ISER is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -942,6 +1037,19 @@ CONFIG_SGI_IOC3=y # CONFIG_RTC_CLASS is not set # +# DMA Engine support +# +# CONFIG_DMA_ENGINE is not set + +# +# DMA Clients +# + +# +# DMA Devices +# + +# # File systems # CONFIG_EXT2_FS=y @@ -965,15 +1073,16 @@ CONFIG_REISERFS_FS_SECURITY=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y -CONFIG_XFS_EXPORT=y CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QFMT_V1 is not set # CONFIG_QFMT_V2 is not set @@ -1007,8 +1116,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y @@ -1046,7 +1157,7 @@ CONFIG_NFSD_V4=y CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=y +CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m @@ -1056,7 +1167,9 @@ CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_CIFS=m # CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set # CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set # CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set @@ -1129,6 +1242,10 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_UTF8=y # +# Distributed Lock Manager +# + +# # Library routines # # CONFIG_CRC_CCITT is not set @@ -1138,9 +1255,11 @@ CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m CONFIG_GENERIC_ALLOCATOR=y +CONFIG_PLIST=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_IRQ_PER_CPU=y # # Instrumentation Support @@ -1152,20 +1271,26 @@ CONFIG_GENERIC_PENDING_IRQ=y # Kernel hacking # # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=20 CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set -CONFIG_DEBUG_PREEMPT=y -# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_IA64_GRANULE_16MB=y @@ -1186,6 +1311,10 @@ CONFIG_SYSVIPC_COMPAT=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1195,6 +1324,8 @@ CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_DES=m # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/ia64/hp/sim/Kconfig b/arch/ia64/hp/sim/Kconfig index 18ccb1266e1..f92306bbedb 100644 --- a/arch/ia64/hp/sim/Kconfig +++ b/arch/ia64/hp/sim/Kconfig @@ -13,8 +13,8 @@ config HP_SIMSERIAL_CONSOLE depends on HP_SIMSERIAL config HP_SIMSCSI - tristate "Simulated SCSI disk" - depends on SCSI + bool "Simulated SCSI disk" + depends on SCSI=y endmenu diff --git a/arch/ia64/hp/sim/hpsim_irq.c b/arch/ia64/hp/sim/hpsim_irq.c index 8145547bb52..c2f58ff364e 100644 --- a/arch/ia64/hp/sim/hpsim_irq.c +++ b/arch/ia64/hp/sim/hpsim_irq.c @@ -27,7 +27,7 @@ hpsim_set_affinity_noop (unsigned int a, cpumask_t b) } static struct hw_interrupt_type irq_type_hp_sim = { - .typename = "hpsim", + .name = "hpsim", .startup = hpsim_irq_startup, .shutdown = hpsim_irq_noop, .enable = hpsim_irq_noop, diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 32c3abededc..73ef4a85b86 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -64,9 +64,6 @@ EXPORT_SYMBOL(pm_idle); void (*pm_power_off) (void); EXPORT_SYMBOL(pm_power_off); -unsigned char acpi_kbd_controller_present = 1; -unsigned char acpi_legacy_devices; - unsigned int acpi_cpei_override; unsigned int acpi_cpei_phys_cpuid; @@ -628,12 +625,6 @@ static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size) fadt = (struct fadt_descriptor *)fadt_header; - if (!(fadt->iapc_boot_arch & BAF_8042_KEYBOARD_CONTROLLER)) - acpi_kbd_controller_present = 0; - - if (fadt->iapc_boot_arch & BAF_LEGACY_DEVICES) - acpi_legacy_devices = 1; - acpi_register_gsi(fadt->sci_int, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW); return 0; } diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 9bf15fefa7e..60d64950e3c 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -426,7 +426,7 @@ iosapic_end_level_irq (unsigned int irq) #define iosapic_ack_level_irq nop struct hw_interrupt_type irq_type_iosapic_level = { - .typename = "IO-SAPIC-level", + .name = "IO-SAPIC-level", .startup = iosapic_startup_level_irq, .shutdown = iosapic_shutdown_level_irq, .enable = iosapic_enable_level_irq, @@ -473,7 +473,7 @@ iosapic_ack_edge_irq (unsigned int irq) #define iosapic_end_edge_irq nop struct hw_interrupt_type irq_type_iosapic_edge = { - .typename = "IO-SAPIC-edge", + .name = "IO-SAPIC-edge", .startup = iosapic_startup_edge_irq, .shutdown = iosapic_disable_edge_irq, .enable = iosapic_enable_edge_irq, @@ -664,7 +664,7 @@ register_intr (unsigned int gsi, int vector, unsigned char delivery, printk(KERN_WARNING "%s: changing vector %d from %s to %s\n", __FUNCTION__, vector, - idesc->chip->typename, irq_type->typename); + idesc->chip->name, irq_type->name); idesc->chip = irq_type; } return 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index f07c0864b0b..54d55e4d64f 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -76,7 +76,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); } #endif - seq_printf(p, " %14s", irq_desc[i].chip->typename); + seq_printf(p, " %14s", irq_desc[i].chip->name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) @@ -197,7 +197,7 @@ void fixup_irqs(void) struct pt_regs *old_regs = set_irq_regs(NULL); vectors_in_migration[irq]=0; - __do_IRQ(irq); + generic_handle_irq(irq); set_irq_regs(old_regs); } } diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 68339dd0c9e..ba3ba8bc50b 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -180,11 +180,13 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs) saved_tpr = ia64_getreg(_IA64_REG_CR_TPR); ia64_srlz_d(); while (vector != IA64_SPURIOUS_INT_VECTOR) { - if (!IS_RESCHEDULE(vector)) { + if (unlikely(IS_RESCHEDULE(vector))) + kstat_this_cpu.irqs[vector]++; + else { ia64_setreg(_IA64_REG_CR_TPR, vector); ia64_srlz_d(); - __do_IRQ(local_vector_to_irq(vector)); + generic_handle_irq(local_vector_to_irq(vector)); /* * Disable interrupts and send EOI: @@ -225,7 +227,9 @@ void ia64_process_pending_intr(void) * Perform normal interrupt style processing */ while (vector != IA64_SPURIOUS_INT_VECTOR) { - if (!IS_RESCHEDULE(vector)) { + if (unlikely(IS_RESCHEDULE(vector))) + kstat_this_cpu.irqs[vector]++; + else { struct pt_regs *old_regs = set_irq_regs(NULL); ia64_setreg(_IA64_REG_CR_TPR, vector); @@ -238,7 +242,7 @@ void ia64_process_pending_intr(void) * Probably could shared code. */ vectors_in_migration[local_vector_to_irq(vector)]=0; - __do_IRQ(local_vector_to_irq(vector)); + generic_handle_irq(local_vector_to_irq(vector)); set_irq_regs(old_regs); /* @@ -258,11 +262,22 @@ void ia64_process_pending_intr(void) #ifdef CONFIG_SMP extern irqreturn_t handle_IPI (int irq, void *dev_id); +static irqreturn_t dummy_handler (int irq, void *dev_id) +{ + BUG(); +} + static struct irqaction ipi_irqaction = { .handler = handle_IPI, .flags = IRQF_DISABLED, .name = "IPI" }; + +static struct irqaction resched_irqaction = { + .handler = dummy_handler, + .flags = SA_INTERRUPT, + .name = "resched" +}; #endif void @@ -287,6 +302,7 @@ init_IRQ (void) register_percpu_irq(IA64_SPURIOUS_INT_VECTOR, NULL); #ifdef CONFIG_SMP register_percpu_irq(IA64_IPI_VECTOR, &ipi_irqaction); + register_percpu_irq(IA64_IPI_RESCHEDULE, &resched_irqaction); #endif #ifdef CONFIG_PERFMON pfm_init_percpu(); diff --git a/arch/ia64/kernel/irq_lsapic.c b/arch/ia64/kernel/irq_lsapic.c index 1ab58b09f3d..c2f07beb175 100644 --- a/arch/ia64/kernel/irq_lsapic.c +++ b/arch/ia64/kernel/irq_lsapic.c @@ -34,7 +34,7 @@ static int lsapic_retrigger(unsigned int irq) } struct hw_interrupt_type irq_type_ia64_lsapic = { - .typename = "LSAPIC", + .name = "LSAPIC", .startup = lsapic_noop_startup, .shutdown = lsapic_noop, .enable = lsapic_noop, diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c index a45009d2bc9..afc1403799c 100644 --- a/arch/ia64/kernel/mca_drv.c +++ b/arch/ia64/kernel/mca_drv.c @@ -435,6 +435,50 @@ is_mca_global(peidx_table_t *peidx, pal_bus_check_info_t *pbci, } /** + * get_target_identifier - Get the valid Cache or Bus check target identifier. + * @peidx: pointer of index of processor error section + * + * Return value: + * target address on Success / 0 on Failue + */ +static u64 +get_target_identifier(peidx_table_t *peidx) +{ + u64 target_address = 0; + sal_log_mod_error_info_t *smei; + pal_cache_check_info_t *pcci; + int i, level = 9; + + /* + * Look through the cache checks for a valid target identifier + * If more than one valid target identifier, return the one + * with the lowest cache level. + */ + for (i = 0; i < peidx_cache_check_num(peidx); i++) { + smei = (sal_log_mod_error_info_t *)peidx_cache_check(peidx, i); + if (smei->valid.target_identifier && smei->target_identifier) { + pcci = (pal_cache_check_info_t *)&(smei->check_info); + if (!target_address || (pcci->level < level)) { + target_address = smei->target_identifier; + level = pcci->level; + continue; + } + } + } + if (target_address) + return target_address; + + /* + * Look at the bus check for a valid target identifier + */ + smei = peidx_bus_check(peidx, 0); + if (smei && smei->valid.target_identifier) + return smei->target_identifier; + + return 0; +} + +/** * recover_from_read_error - Try to recover the errors which type are "read"s. * @slidx: pointer of index of SAL error record * @peidx: pointer of index of processor error section @@ -450,13 +494,14 @@ recover_from_read_error(slidx_table_t *slidx, peidx_table_t *peidx, pal_bus_check_info_t *pbci, struct ia64_sal_os_state *sos) { - sal_log_mod_error_info_t *smei; + u64 target_identifier; pal_min_state_area_t *pmsa; struct ia64_psr *psr1, *psr2; ia64_fptr_t *mca_hdlr_bh = (ia64_fptr_t*)mca_handler_bhhook; /* Is target address valid? */ - if (!pbci->tv) + target_identifier = get_target_identifier(peidx); + if (!target_identifier) return fatal_mca("target address not valid"); /* @@ -487,32 +532,28 @@ recover_from_read_error(slidx_table_t *slidx, pmsa = sos->pal_min_state; if (psr1->cpl != 0 || ((psr2->cpl != 0) && mca_recover_range(pmsa->pmsa_iip))) { - smei = peidx_bus_check(peidx, 0); - if (smei->valid.target_identifier) { - /* - * setup for resume to bottom half of MCA, - * "mca_handler_bhhook" - */ - /* pass to bhhook as argument (gr8, ...) */ - pmsa->pmsa_gr[8-1] = smei->target_identifier; - pmsa->pmsa_gr[9-1] = pmsa->pmsa_iip; - pmsa->pmsa_gr[10-1] = pmsa->pmsa_ipsr; - /* set interrupted return address (but no use) */ - pmsa->pmsa_br0 = pmsa->pmsa_iip; - /* change resume address to bottom half */ - pmsa->pmsa_iip = mca_hdlr_bh->fp; - pmsa->pmsa_gr[1-1] = mca_hdlr_bh->gp; - /* set cpl with kernel mode */ - psr2 = (struct ia64_psr *)&pmsa->pmsa_ipsr; - psr2->cpl = 0; - psr2->ri = 0; - psr2->bn = 1; - psr2->i = 0; - - return mca_recovered("user memory corruption. " + /* + * setup for resume to bottom half of MCA, + * "mca_handler_bhhook" + */ + /* pass to bhhook as argument (gr8, ...) */ + pmsa->pmsa_gr[8-1] = target_identifier; + pmsa->pmsa_gr[9-1] = pmsa->pmsa_iip; + pmsa->pmsa_gr[10-1] = pmsa->pmsa_ipsr; + /* set interrupted return address (but no use) */ + pmsa->pmsa_br0 = pmsa->pmsa_iip; + /* change resume address to bottom half */ + pmsa->pmsa_iip = mca_hdlr_bh->fp; + pmsa->pmsa_gr[1-1] = mca_hdlr_bh->gp; + /* set cpl with kernel mode */ + psr2 = (struct ia64_psr *)&pmsa->pmsa_ipsr; + psr2->cpl = 0; + psr2->ri = 0; + psr2->bn = 1; + psr2->i = 0; + + return mca_recovered("user memory corruption. " "kill affected process - recovered."); - } - } return fatal_mca("kernel context not recovered, iip 0x%lx\n", diff --git a/arch/ia64/kernel/pal.S b/arch/ia64/kernel/pal.S index ebaf1e685f5..0b533441c3c 100644 --- a/arch/ia64/kernel/pal.S +++ b/arch/ia64/kernel/pal.S @@ -21,11 +21,12 @@ pal_entry_point: .text /* - * Set the PAL entry point address. This could be written in C code, but we do it here - * to keep it all in one module (besides, it's so trivial that it's + * Set the PAL entry point address. This could be written in C code, but we + * do it here to keep it all in one module (besides, it's so trivial that it's * not a big deal). * - * in0 Address of the PAL entry point (text address, NOT a function descriptor). + * in0 Address of the PAL entry point (text address, NOT a function + * descriptor). */ GLOBAL_ENTRY(ia64_pal_handler_init) alloc r3=ar.pfs,1,0,0,0 @@ -36,9 +37,9 @@ GLOBAL_ENTRY(ia64_pal_handler_init) END(ia64_pal_handler_init) /* - * Default PAL call handler. This needs to be coded in assembly because it uses - * the static calling convention, i.e., the RSE may not be used and calls are - * done via "br.cond" (not "br.call"). + * Default PAL call handler. This needs to be coded in assembly because it + * uses the static calling convention, i.e., the RSE may not be used and + * calls are done via "br.cond" (not "br.call"). */ GLOBAL_ENTRY(ia64_pal_default_handler) mov r8=-1 @@ -50,12 +51,10 @@ END(ia64_pal_default_handler) * * in0 Index of PAL service * in1 - in3 Remaining PAL arguments - * in4 1 ==> clear psr.ic, 0 ==> don't clear psr.ic - * */ GLOBAL_ENTRY(ia64_pal_call_static) - .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5) - alloc loc1 = ar.pfs,5,5,0,0 + .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(4) + alloc loc1 = ar.pfs,4,5,0,0 movl loc2 = pal_entry_point 1: { mov r28 = in0 @@ -64,7 +63,6 @@ GLOBAL_ENTRY(ia64_pal_call_static) } ;; ld8 loc2 = [loc2] // loc2 <- entry point - tbit.nz p6,p7 = in4, 0 adds r8 = 1f-1b,r8 mov loc4=ar.rsc // save RSE configuration ;; @@ -74,13 +72,11 @@ GLOBAL_ENTRY(ia64_pal_call_static) .body mov r30 = in2 -(p6) rsm psr.i | psr.ic mov r31 = in3 mov b7 = loc2 -(p7) rsm psr.i + rsm psr.i ;; -(p6) srlz.i mov rp = r8 br.cond.sptk.many b7 1: mov psr.l = loc3 @@ -96,8 +92,8 @@ END(ia64_pal_call_static) * Make a PAL call using the stacked registers calling convention. * * Inputs: - * in0 Index of PAL service - * in2 - in3 Remaning PAL arguments + * in0 Index of PAL service + * in2 - in3 Remaining PAL arguments */ GLOBAL_ENTRY(ia64_pal_call_stacked) .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(4) @@ -131,18 +127,18 @@ END(ia64_pal_call_stacked) * Make a physical mode PAL call using the static registers calling convention. * * Inputs: - * in0 Index of PAL service - * in2 - in3 Remaning PAL arguments + * in0 Index of PAL service + * in2 - in3 Remaining PAL arguments * * PSR_LP, PSR_TB, PSR_ID, PSR_DA are never set by the kernel. * So we don't need to clear them. */ -#define PAL_PSR_BITS_TO_CLEAR \ - (IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_DB | IA64_PSR_RT | \ - IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED | \ +#define PAL_PSR_BITS_TO_CLEAR \ + (IA64_PSR_I | IA64_PSR_IT | IA64_PSR_DT | IA64_PSR_DB | IA64_PSR_RT |\ + IA64_PSR_DD | IA64_PSR_SS | IA64_PSR_RI | IA64_PSR_ED | \ IA64_PSR_DFL | IA64_PSR_DFH) -#define PAL_PSR_BITS_TO_SET \ +#define PAL_PSR_BITS_TO_SET \ (IA64_PSR_BN) @@ -178,7 +174,7 @@ GLOBAL_ENTRY(ia64_pal_call_phys_static) ;; andcm r16=loc3,r16 // removes bits to clear from psr br.call.sptk.many rp=ia64_switch_mode_phys -.ret1: mov rp = r8 // install return address (physical) + mov rp = r8 // install return address (physical) mov loc5 = r19 mov loc6 = r20 br.cond.sptk.many b7 @@ -188,7 +184,6 @@ GLOBAL_ENTRY(ia64_pal_call_phys_static) mov r19=loc5 mov r20=loc6 br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode -.ret2: mov psr.l = loc3 // restore init PSR mov ar.pfs = loc1 @@ -203,8 +198,8 @@ END(ia64_pal_call_phys_static) * Make a PAL call using the stacked registers in physical mode. * * Inputs: - * in0 Index of PAL service - * in2 - in3 Remaning PAL arguments + * in0 Index of PAL service + * in2 - in3 Remaining PAL arguments */ GLOBAL_ENTRY(ia64_pal_call_phys_stacked) .prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(5) @@ -212,7 +207,7 @@ GLOBAL_ENTRY(ia64_pal_call_phys_stacked) movl loc2 = pal_entry_point 1: { mov r28 = in0 // copy procedure index - mov loc0 = rp // save rp + mov loc0 = rp // save rp } .body ;; @@ -245,7 +240,7 @@ GLOBAL_ENTRY(ia64_pal_call_phys_stacked) mov r16=loc3 // r16= original psr mov r19=loc5 mov r20=loc6 - br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode + br.call.sptk.many rp=ia64_switch_mode_virt // return to virtual mode mov psr.l = loc3 // restore init PSR mov ar.pfs = loc1 @@ -257,10 +252,11 @@ GLOBAL_ENTRY(ia64_pal_call_phys_stacked) END(ia64_pal_call_phys_stacked) /* - * Save scratch fp scratch regs which aren't saved in pt_regs already (fp10-fp15). + * Save scratch fp scratch regs which aren't saved in pt_regs already + * (fp10-fp15). * - * NOTE: We need to do this since firmware (SAL and PAL) may use any of the scratch - * regs fp-low partition. + * NOTE: We need to do this since firmware (SAL and PAL) may use any of the + * scratch regs fp-low partition. * * Inputs: * in0 Address of stack storage for fp regs diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 281004ff7b0..3aaede0d698 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -5558,12 +5558,13 @@ report_spurious2: } static irqreturn_t -pfm_interrupt_handler(int irq, void *arg, struct pt_regs *regs) +pfm_interrupt_handler(int irq, void *arg) { unsigned long start_cycles, total_cycles; unsigned long min, max; int this_cpu; int ret; + struct pt_regs *regs = get_irq_regs(); this_cpu = get_cpu(); if (likely(!pfm_alt_intr_handler)) { diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 642fdc7b969..20bad78b507 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -223,12 +223,13 @@ static void __init sal_desc_ap_wakeup(void *p) { } */ static int sal_cache_flush_drops_interrupts; -static void __init +void __init check_sal_cache_flush (void) { unsigned long flags; int cpu; - u64 vector; + u64 vector, cache_type = 3; + struct ia64_sal_retval isrv; cpu = get_cpu(); local_irq_save(flags); @@ -243,7 +244,10 @@ check_sal_cache_flush (void) while (!ia64_get_irr(IA64_TIMER_VECTOR)) cpu_relax(); - ia64_sal_cache_flush(3); + SAL_CALL(isrv, SAL_CACHE_FLUSH, cache_type, 0, 0, 0, 0, 0, 0); + + if (isrv.status) + printk(KERN_ERR "SAL_CAL_FLUSH failed with %ld\n", isrv.status); if (ia64_get_irr(IA64_TIMER_VECTOR)) { vector = ia64_get_ivr(); @@ -331,7 +335,6 @@ ia64_sal_init (struct ia64_sal_systab *systab) p += SAL_DESC_SIZE(*p); } - check_sal_cache_flush(); } int diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index c4caa800349..d10404a4175 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -457,6 +457,8 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ mmu_context_init(); /* initialize context_id bitmap */ + check_sal_cache_flush(); + #ifdef CONFIG_ACPI acpi_boot_init(); #endif diff --git a/arch/ia64/kernel/smp.c b/arch/ia64/kernel/smp.c index 657ac99a451..6ab95ceaf9d 100644 --- a/arch/ia64/kernel/smp.c +++ b/arch/ia64/kernel/smp.c @@ -108,7 +108,7 @@ cpu_die(void) } irqreturn_t -handle_IPI (int irq, void *dev_id, struct pt_regs *regs) +handle_IPI (int irq, void *dev_id) { int this_cpu = get_cpu(); unsigned long *pending_ipis = &__ia64_per_cpu_var(ipi_operation); @@ -328,10 +328,14 @@ int smp_call_function (void (*func) (void *info), void *info, int nonatomic, int wait) { struct call_data_struct data; - int cpus = num_online_cpus()-1; + int cpus; - if (!cpus) + spin_lock(&call_lock); + cpus = num_online_cpus() - 1; + if (!cpus) { + spin_unlock(&call_lock); return 0; + } /* Can deadlock when called with interrupts disabled */ WARN_ON(irqs_disabled()); @@ -343,8 +347,6 @@ smp_call_function (void (*func) (void *info), void *info, int nonatomic, int wai if (wait) atomic_set(&data.finished, 0); - spin_lock(&call_lock); - call_data = &data; mb(); /* ensure store to call_data precedes setting of IPI_CALL_FUNC */ send_IPI_allbutself(IPI_CALL_FUNC); diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 41169a9bc30..39e0cd3a088 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -84,6 +84,12 @@ timer_interrupt (int irq, void *dev_id) if (time_after(new_itm, ia64_get_itc())) break; + + /* + * Allow IPIs to interrupt the timer loop. + */ + local_irq_enable(); + local_irq_disable(); } do { diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index b3b2e389d6b..d6083a0936f 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -128,13 +128,7 @@ SECTIONS .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS __initcall_end = .; } diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index daf977ff292..82deaa3a7c4 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -233,6 +233,7 @@ paging_init (void) efi_memmap_walk(count_pages, &num_physpages); max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); max_zone_pfns[ZONE_DMA] = max_dma; max_zone_pfns[ZONE_NORMAL] = max_low_pfn; diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d497b6b0f5b..96722cb1b49 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -709,6 +709,7 @@ void __init paging_init(void) max_pfn = mem_data[node].max_pfn; } + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); max_zone_pfns[ZONE_DMA] = max_dma; max_zone_pfns[ZONE_NORMAL] = max_pfn; free_area_init_nodes(max_zone_pfns); diff --git a/arch/ia64/mm/hugetlbpage.c b/arch/ia64/mm/hugetlbpage.c index eee5c1cfbe3..f3a9585e98a 100644 --- a/arch/ia64/mm/hugetlbpage.c +++ b/arch/ia64/mm/hugetlbpage.c @@ -70,8 +70,10 @@ huge_pte_offset (struct mm_struct *mm, unsigned long addr) * Don't actually need to do any preparation, but need to make sure * the address is in the right region. */ -int prepare_hugepage_range(unsigned long addr, unsigned long len) +int prepare_hugepage_range(unsigned long addr, unsigned long len, pgoff_t pgoff) { + if (pgoff & (~HPAGE_MASK >> PAGE_SHIFT)) + return -EINVAL; if (len & ~HPAGE_MASK) return -EINVAL; if (addr & ~HPAGE_MASK) diff --git a/arch/ia64/pci/Makefile b/arch/ia64/pci/Makefile index e66889e6922..fb14dc520d2 100644 --- a/arch/ia64/pci/Makefile +++ b/arch/ia64/pci/Makefile @@ -1,4 +1,4 @@ # # Makefile for the ia64-specific parts of the pci bus # -obj-y := pci.o +obj-y := pci.o fixup.o diff --git a/arch/ia64/pci/fixup.c b/arch/ia64/pci/fixup.c new file mode 100644 index 00000000000..245dc1fedc2 --- /dev/null +++ b/arch/ia64/pci/fixup.c @@ -0,0 +1,69 @@ +/* + * Exceptions for specific devices. Usually work-arounds for fatal design flaws. + * Derived from fixup.c of i386 tree. + */ + +#include <linux/pci.h> +#include <linux/init.h> + +#include <asm/machvec.h> + +/* + * Fixup to mark boot BIOS video selected by BIOS before it changes + * + * From information provided by "Jon Smirl" <jonsmirl@gmail.com> + * + * The standard boot ROM sequence for an x86 machine uses the BIOS + * to select an initial video card for boot display. This boot video + * card will have it's BIOS copied to C0000 in system RAM. + * IORESOURCE_ROM_SHADOW is used to associate the boot video + * card with this copy. On laptops this copy has to be used since + * the main ROM may be compressed or combined with another image. + * See pci_map_rom() for use of this flag. IORESOURCE_ROM_SHADOW + * is marked here since the boot video device will be the only enabled + * video device at this point. + */ + +static void __devinit pci_fixup_video(struct pci_dev *pdev) +{ + struct pci_dev *bridge; + struct pci_bus *bus; + u16 config; + + if ((strcmp(platform_name, "dig") != 0) + && (strcmp(platform_name, "hpzx1") != 0)) + return; + /* Maybe, this machine supports legacy memory map. */ + + if ((pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA) + return; + + /* Is VGA routed to us? */ + bus = pdev->bus; + while (bus) { + bridge = bus->self; + + /* + * From information provided by + * "David Miller" <davem@davemloft.net> + * The bridge control register is valid for PCI header + * type BRIDGE, or CARDBUS. Host to PCI controllers use + * PCI header type NORMAL. + */ + if (bridge + &&((bridge->hdr_type == PCI_HEADER_TYPE_BRIDGE) + ||(bridge->hdr_type == PCI_HEADER_TYPE_CARDBUS))) { + pci_read_config_word(bridge, PCI_BRIDGE_CONTROL, + &config); + if (!(config & PCI_BRIDGE_CTL_VGA)) + return; + } + bus = bus->parent; + } + pci_read_config_word(pdev, PCI_COMMAND, &config); + if (config & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + pdev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_SHADOW; + printk(KERN_DEBUG "Boot video device is %s\n", pci_name(pdev)); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_video); diff --git a/arch/ia64/sn/kernel/bte.c b/arch/ia64/sn/kernel/bte.c index 7f73ad4408a..ff1c5560117 100644 --- a/arch/ia64/sn/kernel/bte.c +++ b/arch/ia64/sn/kernel/bte.c @@ -381,14 +381,13 @@ bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode) * bcopy to the destination. */ - /* Add the leader from source */ - headBteLen = len + (src & L1_CACHE_MASK); - /* Add the trailing bytes from footer. */ - headBteLen += L1_CACHE_BYTES - (headBteLen & L1_CACHE_MASK); - headBteSource = src & ~L1_CACHE_MASK; headBcopySrcOffset = src & L1_CACHE_MASK; headBcopyDest = dest; headBcopyLen = len; + + headBteSource = src - headBcopySrcOffset; + /* Add the leading and trailing bytes from source */ + headBteLen = L1_CACHE_ALIGN(len + headBcopySrcOffset); } if (headBcopyLen > 0) { diff --git a/arch/ia64/sn/kernel/irq.c b/arch/ia64/sn/kernel/irq.c index 7bb6ad188ba..0b49459a878 100644 --- a/arch/ia64/sn/kernel/irq.c +++ b/arch/ia64/sn/kernel/irq.c @@ -201,7 +201,7 @@ static void sn_set_affinity_irq(unsigned int irq, cpumask_t mask) } struct hw_interrupt_type irq_type_sn = { - .typename = "SN hub", + .name = "SN hub", .startup = sn_startup_irq, .shutdown = sn_shutdown_irq, .enable = sn_enable_irq, diff --git a/arch/ia64/sn/kernel/setup.c b/arch/ia64/sn/kernel/setup.c index 5f2dcba7fa8..7a2d824c5ce 100644 --- a/arch/ia64/sn/kernel/setup.c +++ b/arch/ia64/sn/kernel/setup.c @@ -65,7 +65,6 @@ extern void sn_timer_init(void); extern unsigned long last_time_offset; extern void (*ia64_mark_idle) (int); extern void snidle(int); -extern unsigned char acpi_kbd_controller_present; extern unsigned long long (*ia64_printk_clock)(void); unsigned long sn_rtc_cycles_per_second; @@ -452,17 +451,6 @@ void __init sn_setup(char **cmdline_p) ia64_printk_clock = ia64_sn2_printk_clock; - /* - * Old PROMs do not provide an ACPI FADT. Disable legacy keyboard - * support here so we don't have to listen to failed keyboard probe - * messages. - */ - if (is_shub1() && version <= 0x0209 && acpi_kbd_controller_present) { - printk(KERN_INFO "Disabling legacy keyboard support as prom " - "is too old and doesn't provide FADT\n"); - acpi_kbd_controller_present = 0; - } - printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF); /* diff --git a/arch/m32r/kernel/setup.c b/arch/m32r/kernel/setup.c index 3f35ab3d2dc..0e7778be33c 100644 --- a/arch/m32r/kernel/setup.c +++ b/arch/m32r/kernel/setup.c @@ -369,10 +369,10 @@ static void c_stop(struct seq_file *m, void *v) } struct seq_operations cpuinfo_op = { - start: c_start, - next: c_next, - stop: c_stop, - show: show_cpuinfo, + .start = c_start, + .next = c_next, + .stop = c_stop, + .show = show_cpuinfo, }; #endif /* CONFIG_PROC_FS */ diff --git a/arch/m32r/kernel/setup_mappi.c b/arch/m32r/kernel/setup_mappi.c index 67dbbdc9d11..6b2d77da068 100644 --- a/arch/m32r/kernel/setup_mappi.c +++ b/arch/m32r/kernel/setup_mappi.c @@ -86,7 +86,7 @@ void __init init_IRQ(void) /* INT0 : LAN controller (RTL8019AS) */ irq_desc[M32R_IRQ_INT0].status = IRQ_DISABLED; irq_desc[M32R_IRQ_INT0].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT0].action = 0; + irq_desc[M32R_IRQ_INT0].action = NULL; irq_desc[M32R_IRQ_INT0].depth = 1; icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10; disable_mappi_irq(M32R_IRQ_INT0); @@ -95,7 +95,7 @@ void __init init_IRQ(void) /* MFT2 : system timer */ irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED; irq_desc[M32R_IRQ_MFT2].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_MFT2].action = 0; + irq_desc[M32R_IRQ_MFT2].action = NULL; irq_desc[M32R_IRQ_MFT2].depth = 1; icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN; disable_mappi_irq(M32R_IRQ_MFT2); @@ -104,7 +104,7 @@ void __init init_IRQ(void) /* SIO0_R : uart receive data */ irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED; irq_desc[M32R_IRQ_SIO0_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_R].action = 0; + irq_desc[M32R_IRQ_SIO0_R].action = NULL; irq_desc[M32R_IRQ_SIO0_R].depth = 1; icu_data[M32R_IRQ_SIO0_R].icucr = 0; disable_mappi_irq(M32R_IRQ_SIO0_R); @@ -112,7 +112,7 @@ void __init init_IRQ(void) /* SIO0_S : uart send data */ irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED; irq_desc[M32R_IRQ_SIO0_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO0_S].action = 0; + irq_desc[M32R_IRQ_SIO0_S].action = NULL; irq_desc[M32R_IRQ_SIO0_S].depth = 1; icu_data[M32R_IRQ_SIO0_S].icucr = 0; disable_mappi_irq(M32R_IRQ_SIO0_S); @@ -120,7 +120,7 @@ void __init init_IRQ(void) /* SIO1_R : uart receive data */ irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED; irq_desc[M32R_IRQ_SIO1_R].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_R].action = 0; + irq_desc[M32R_IRQ_SIO1_R].action = NULL; irq_desc[M32R_IRQ_SIO1_R].depth = 1; icu_data[M32R_IRQ_SIO1_R].icucr = 0; disable_mappi_irq(M32R_IRQ_SIO1_R); @@ -128,7 +128,7 @@ void __init init_IRQ(void) /* SIO1_S : uart send data */ irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED; irq_desc[M32R_IRQ_SIO1_S].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_SIO1_S].action = 0; + irq_desc[M32R_IRQ_SIO1_S].action = NULL; irq_desc[M32R_IRQ_SIO1_S].depth = 1; icu_data[M32R_IRQ_SIO1_S].icucr = 0; disable_mappi_irq(M32R_IRQ_SIO1_S); @@ -138,7 +138,7 @@ void __init init_IRQ(void) /* INT1 : pccard0 interrupt */ irq_desc[M32R_IRQ_INT1].status = IRQ_DISABLED; irq_desc[M32R_IRQ_INT1].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT1].action = 0; + irq_desc[M32R_IRQ_INT1].action = NULL; irq_desc[M32R_IRQ_INT1].depth = 1; icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; disable_mappi_irq(M32R_IRQ_INT1); @@ -146,7 +146,7 @@ void __init init_IRQ(void) /* INT2 : pccard1 interrupt */ irq_desc[M32R_IRQ_INT2].status = IRQ_DISABLED; irq_desc[M32R_IRQ_INT2].chip = &mappi_irq_type; - irq_desc[M32R_IRQ_INT2].action = 0; + irq_desc[M32R_IRQ_INT2].action = NULL; irq_desc[M32R_IRQ_INT2].depth = 1; icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN | M32R_ICUCR_ISMOD00; disable_mappi_irq(M32R_IRQ_INT2); diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index a9174efe80c..b60cea4aeba 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -33,7 +33,7 @@ int do_signal(struct pt_regs *, sigset_t *); asmlinkage int -sys_rt_sigsuspend(sigset_t *unewset, size_t sigsetsize, +sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize, unsigned long r2, unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, struct pt_regs *regs) { @@ -78,8 +78,8 @@ sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss, struct rt_sigframe { int sig; - struct siginfo *pinfo; - void *puc; + struct siginfo __user *pinfo; + void __user *puc; struct siginfo info; struct ucontext uc; // struct _fpstate fpstate; diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index 722e21f556d..360129174b2 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -231,7 +231,7 @@ void smp_flush_tlb_all(void) local_irq_save(flags); __flush_tlb_all(); local_irq_restore(flags); - smp_call_function(flush_tlb_all_ipi, 0, 1, 1); + smp_call_function(flush_tlb_all_ipi, NULL, 1, 1); preempt_enable(); } diff --git a/arch/m32r/kernel/sys_m32r.c b/arch/m32r/kernel/sys_m32r.c index b567351f3c5..b4e7bcb4354 100644 --- a/arch/m32r/kernel/sys_m32r.c +++ b/arch/m32r/kernel/sys_m32r.c @@ -31,7 +31,7 @@ /* * sys_tas() - test-and-set */ -asmlinkage int sys_tas(int *addr) +asmlinkage int sys_tas(int __user *addr) { int oldval; @@ -90,7 +90,7 @@ sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2, error = do_pipe(fd); if (!error) { - if (copy_to_user((void *)r0, (void *)fd, 2*sizeof(int))) + if (copy_to_user((void __user *)r0, fd, 2*sizeof(int))) error = -EFAULT; } return error; @@ -201,7 +201,7 @@ asmlinkage int sys_ipc(uint call, int first, int second, } } -asmlinkage int sys_uname(struct old_utsname * name) +asmlinkage int sys_uname(struct old_utsname __user * name) { int err; if (!name) diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index c1daf2c40c7..97e0b1c0830 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -268,7 +268,7 @@ static __inline__ void do_trap(int trapnr, int signr, const char * str, #define DO_ERROR(trapnr, signr, str, name) \ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ { \ - do_trap(trapnr, signr, 0, regs, error_code, NULL); \ + do_trap(trapnr, signr, NULL, regs, error_code, NULL); \ } #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ diff --git a/arch/m32r/kernel/vmlinux.lds.S b/arch/m32r/kernel/vmlinux.lds.S index 13c7bb698e3..358b9cee2c6 100644 --- a/arch/m32r/kernel/vmlinux.lds.S +++ b/arch/m32r/kernel/vmlinux.lds.S @@ -83,13 +83,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/m68k/kernel/m68k_ksyms.c b/arch/m68k/kernel/m68k_ksyms.c index f9636e84e6a..6fc69c74fe2 100644 --- a/arch/m68k/kernel/m68k_ksyms.c +++ b/arch/m68k/kernel/m68k_ksyms.c @@ -1,61 +1,10 @@ #include <linux/module.h> -#include <linux/linkage.h> -#include <linux/sched.h> -#include <linux/mm.h> -#include <linux/user.h> -#include <linux/elfcore.h> -#include <linux/in6.h> -#include <linux/interrupt.h> - -#include <asm/setup.h> -#include <asm/machdep.h> -#include <asm/pgalloc.h> -#include <asm/irq.h> -#include <asm/io.h> #include <asm/semaphore.h> -#include <asm/checksum.h> asmlinkage long long __ashldi3 (long long, int); asmlinkage long long __ashrdi3 (long long, int); asmlinkage long long __lshrdi3 (long long, int); asmlinkage long long __muldi3 (long long, long long); -extern char m68k_debug_device[]; - -/* platform dependent support */ - -EXPORT_SYMBOL(m68k_machtype); -EXPORT_SYMBOL(m68k_cputype); -EXPORT_SYMBOL(m68k_is040or060); -EXPORT_SYMBOL(m68k_realnum_memory); -EXPORT_SYMBOL(m68k_memory); -#ifndef CONFIG_SUN3 -EXPORT_SYMBOL(cache_push); -EXPORT_SYMBOL(cache_clear); -#ifndef CONFIG_SINGLE_MEMORY_CHUNK -EXPORT_SYMBOL(mm_vtop); -EXPORT_SYMBOL(mm_ptov); -EXPORT_SYMBOL(mm_end_of_chunk); -#else -EXPORT_SYMBOL(m68k_memoffset); -#endif /* !CONFIG_SINGLE_MEMORY_CHUNK */ -EXPORT_SYMBOL(__ioremap); -EXPORT_SYMBOL(iounmap); -EXPORT_SYMBOL(kernel_set_cachemode); -#endif /* !CONFIG_SUN3 */ -EXPORT_SYMBOL(m68k_debug_device); -EXPORT_SYMBOL(mach_hwclk); -EXPORT_SYMBOL(mach_get_ss); -EXPORT_SYMBOL(mach_get_rtc_pll); -EXPORT_SYMBOL(mach_set_rtc_pll); -#ifdef CONFIG_INPUT_M68K_BEEP_MODULE -EXPORT_SYMBOL(mach_beep); -#endif -EXPORT_SYMBOL(dump_fpu); -EXPORT_SYMBOL(dump_thread); -EXPORT_SYMBOL(kernel_thread); -#ifdef CONFIG_VME -EXPORT_SYMBOL(vme_brdtype); -#endif /* The following are special because they're not called explicitly (the C compiler generates them). Fortunately, diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c index 45a46646c1b..99fc1226f7f 100644 --- a/arch/m68k/kernel/process.c +++ b/arch/m68k/kernel/process.c @@ -187,6 +187,7 @@ int kernel_thread(int (*fn)(void *), void * arg, unsigned long flags) set_fs (fs); return pid; } +EXPORT_SYMBOL(kernel_thread); void flush_thread(void) { @@ -221,13 +222,13 @@ asmlinkage int m68k_clone(struct pt_regs *regs) { unsigned long clone_flags; unsigned long newsp; - int *parent_tidptr, *child_tidptr; + int __user *parent_tidptr, *child_tidptr; /* syscall2 puts clone_flags in d1 and usp in d2 */ clone_flags = regs->d1; newsp = regs->d2; - parent_tidptr = (int *)regs->d3; - child_tidptr = (int *)regs->d4; + parent_tidptr = (int __user *)regs->d3; + child_tidptr = (int __user *)regs->d4; if (!newsp) newsp = rdusp(); return do_fork(clone_flags, newsp, regs, 0, @@ -311,6 +312,7 @@ int dump_fpu (struct pt_regs *regs, struct user_m68kfp_struct *fpu) : "memory"); return 1; } +EXPORT_SYMBOL(dump_fpu); /* * fill in the user structure for a core dump.. @@ -357,11 +359,12 @@ void dump_thread(struct pt_regs * regs, struct user * dump) /* dump floating point stuff */ dump->u_fpvalid = dump_fpu (regs, &dump->m68kfp); } +EXPORT_SYMBOL(dump_thread); /* * sys_execve() executes a new program. */ -asmlinkage int sys_execve(char *name, char **argv, char **envp) +asmlinkage int sys_execve(char __user *name, char __user * __user *argv, char __user * __user *envp) { int error; char * filename; diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c index 42d5b85f335..9af3ee0e555 100644 --- a/arch/m68k/kernel/setup.c +++ b/arch/m68k/kernel/setup.c @@ -42,27 +42,37 @@ unsigned long m68k_machtype; unsigned long m68k_cputype; +EXPORT_SYMBOL(m68k_machtype); +EXPORT_SYMBOL(m68k_cputype); unsigned long m68k_fputype; unsigned long m68k_mmutype; #ifdef CONFIG_VME unsigned long vme_brdtype; +EXPORT_SYMBOL(vme_brdtype); #endif int m68k_is040or060; +EXPORT_SYMBOL(m68k_is040or060); extern int end; extern unsigned long availmem; int m68k_num_memory; int m68k_realnum_memory; +EXPORT_SYMBOL(m68k_realnum_memory); +#ifdef CONFIG_SINGLE_MEMORY_CHUNK unsigned long m68k_memoffset; +EXPORT_SYMBOL(m68k_memoffset); +#endif struct mem_info m68k_memory[NUM_MEMINFO]; +EXPORT_SYMBOL(m68k_memory); static struct mem_info m68k_ramdisk; static char m68k_command_line[CL_SIZE]; char m68k_debug_device[6] = ""; +EXPORT_SYMBOL(m68k_debug_device); void (*mach_sched_init) (irq_handler_t handler) __initdata = NULL; /* machine dependent irq functions */ @@ -72,10 +82,14 @@ int (*mach_get_hardware_list) (char *buffer); /* machine dependent timer functions */ unsigned long (*mach_gettimeoffset) (void); int (*mach_hwclk) (int, struct rtc_time*); +EXPORT_SYMBOL(mach_hwclk); int (*mach_set_clock_mmss) (unsigned long); unsigned int (*mach_get_ss)(void); int (*mach_get_rtc_pll)(struct rtc_pll_info *); int (*mach_set_rtc_pll)(struct rtc_pll_info *); +EXPORT_SYMBOL(mach_get_ss); +EXPORT_SYMBOL(mach_get_rtc_pll); +EXPORT_SYMBOL(mach_set_rtc_pll); void (*mach_reset)( void ); void (*mach_halt)( void ); void (*mach_power_off)( void ); @@ -89,6 +103,7 @@ void (*mach_l2_flush) (int); #endif #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) void (*mach_beep)(unsigned int, unsigned int); +EXPORT_SYMBOL(mach_beep); #endif #if defined(CONFIG_ISA) && defined(MULTI_ISA) int isa_type; diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 4569406a2e1..759fa244e6c 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -326,13 +326,13 @@ static inline int do_040writeback1(unsigned short wbs, unsigned long wba, switch (wbs & WBSIZ_040) { case BA_SIZE_BYTE: - res = put_user(wbd & 0xff, (char *)wba); + res = put_user(wbd & 0xff, (char __user *)wba); break; case BA_SIZE_WORD: - res = put_user(wbd & 0xffff, (short *)wba); + res = put_user(wbd & 0xffff, (short __user *)wba); break; case BA_SIZE_LONG: - res = put_user(wbd, (int *)wba); + res = put_user(wbd, (int __user *)wba); break; } diff --git a/arch/m68k/kernel/vmlinux-std.lds b/arch/m68k/kernel/vmlinux-std.lds index 69d1d3d30c7..d2794452b19 100644 --- a/arch/m68k/kernel/vmlinux-std.lds +++ b/arch/m68k/kernel/vmlinux-std.lds @@ -54,13 +54,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/m68k/kernel/vmlinux-sun3.lds b/arch/m68k/kernel/vmlinux-sun3.lds index 65cc39c2418..2550b4ae273 100644 --- a/arch/m68k/kernel/vmlinux-sun3.lds +++ b/arch/m68k/kernel/vmlinux-sun3.lds @@ -48,13 +48,7 @@ __init_begin = .; __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/m68k/mm/kmap.c b/arch/m68k/mm/kmap.c index f46f049d29f..b54ef1726c5 100644 --- a/arch/m68k/mm/kmap.c +++ b/arch/m68k/mm/kmap.c @@ -7,6 +7,7 @@ * used by other architectures /Roman Zippel */ +#include <linux/module.h> #include <linux/mm.h> #include <linux/kernel.h> #include <linux/string.h> @@ -219,6 +220,7 @@ void __iomem *__ioremap(unsigned long physaddr, unsigned long size, int cachefla return (void __iomem *)retaddr; } +EXPORT_SYMBOL(__ioremap); /* * Unmap a ioremap()ed region again @@ -234,6 +236,7 @@ void iounmap(void __iomem *addr) free_io_area((__force void *)addr); #endif } +EXPORT_SYMBOL(iounmap); /* * __iounmap unmaps nearly everything, so be careful @@ -360,3 +363,4 @@ void kernel_set_cachemode(void *addr, unsigned long size, int cmode) flush_tlb_all(); } +EXPORT_SYMBOL(kernel_set_cachemode); diff --git a/arch/m68k/mm/memory.c b/arch/m68k/mm/memory.c index a0c095e1722..0f88812822b 100644 --- a/arch/m68k/mm/memory.c +++ b/arch/m68k/mm/memory.c @@ -4,6 +4,7 @@ * Copyright (C) 1995 Hamish Macdonald */ +#include <linux/module.h> #include <linux/mm.h> #include <linux/kernel.h> #include <linux/string.h> @@ -157,9 +158,8 @@ unsigned long mm_vtop(unsigned long vaddr) return -1; } -#endif +EXPORT_SYMBOL(mm_vtop); -#ifndef CONFIG_SINGLE_MEMORY_CHUNK unsigned long mm_ptov (unsigned long paddr) { int i = 0; @@ -185,6 +185,7 @@ unsigned long mm_ptov (unsigned long paddr) #endif return -1; } +EXPORT_SYMBOL(mm_ptov); #endif /* invalidate page in both caches */ @@ -298,6 +299,7 @@ void cache_clear (unsigned long paddr, int len) mach_l2_flush(0); #endif } +EXPORT_SYMBOL(cache_clear); /* probably can be unexported */ /* @@ -350,6 +352,7 @@ void cache_push (unsigned long paddr, int len) mach_l2_flush(1); #endif } +EXPORT_SYMBOL(cache_push); /* probably can be unexported */ #ifndef CONFIG_SINGLE_MEMORY_CHUNK int mm_end_of_chunk (unsigned long addr, int len) @@ -361,4 +364,5 @@ int mm_end_of_chunk (unsigned long addr, int len) return 1; return 0; } +EXPORT_SYMBOL(mm_end_of_chunk); #endif diff --git a/arch/m68k/mm/sun3kmap.c b/arch/m68k/mm/sun3kmap.c index 7f0d86f3fe7..1af24cb5bfe 100644 --- a/arch/m68k/mm/sun3kmap.c +++ b/arch/m68k/mm/sun3kmap.c @@ -8,6 +8,7 @@ * for more details. */ +#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/mm.h> @@ -59,7 +60,7 @@ static inline void do_pmeg_mapin(unsigned long phys, unsigned long virt, } } -void *sun3_ioremap(unsigned long phys, unsigned long size, +void __iomem *sun3_ioremap(unsigned long phys, unsigned long size, unsigned long type) { struct vm_struct *area; @@ -101,22 +102,24 @@ void *sun3_ioremap(unsigned long phys, unsigned long size, virt += seg_pages * PAGE_SIZE; } - return (void *)ret; + return (void __iomem *)ret; } -void *__ioremap(unsigned long phys, unsigned long size, int cache) +void __iomem *__ioremap(unsigned long phys, unsigned long size, int cache) { return sun3_ioremap(phys, size, SUN3_PAGE_TYPE_IO); } +EXPORT_SYMBOL(__ioremap); -void iounmap(void *addr) +void iounmap(void __iomem *addr) { vfree((void *)(PAGE_MASK & (unsigned long)addr)); } +EXPORT_SYMBOL(iounmap); /* sun3_map_test(addr, val) -- Reads a byte from addr, storing to val, * trapping the potential read fault. Returns 0 if the access faulted, diff --git a/arch/m68k/sun3/Makefile b/arch/m68k/sun3/Makefile index 4d4f0695d98..be1a8470d63 100644 --- a/arch/m68k/sun3/Makefile +++ b/arch/m68k/sun3/Makefile @@ -2,6 +2,6 @@ # Makefile for Linux arch/m68k/sun3 source directory # -obj-y := sun3_ksyms.o sun3ints.o sun3dvma.o sbus.o idprom.o +obj-y := sun3ints.o sun3dvma.o sbus.o idprom.o obj-$(CONFIG_SUN3) += config.o mmu_emu.o leds.o dvma.o intersil.o diff --git a/arch/m68k/sun3/idprom.c b/arch/m68k/sun3/idprom.c index 02c1fee6fe7..dca6ab6a4ed 100644 --- a/arch/m68k/sun3/idprom.c +++ b/arch/m68k/sun3/idprom.c @@ -6,6 +6,7 @@ * Sun3/3x models added by David Monro (davidm@psrg.cs.usyd.edu.au) */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> @@ -16,6 +17,8 @@ #include <asm/machines.h> /* Fun with Sun released architectures. */ struct idprom *idprom; +EXPORT_SYMBOL(idprom); + static struct idprom idprom_buffer; /* Here is the master table of Sun machines which use some implementation diff --git a/arch/m68k/sun3/sun3_ksyms.c b/arch/m68k/sun3/sun3_ksyms.c deleted file mode 100644 index 43e5a9af8ab..00000000000 --- a/arch/m68k/sun3/sun3_ksyms.c +++ /dev/null @@ -1,13 +0,0 @@ -#include <linux/module.h> -#include <linux/types.h> -#include <asm/dvma.h> -#include <asm/idprom.h> - -/* - * Add things here when you find the need for it. - */ -EXPORT_SYMBOL(dvma_map_align); -EXPORT_SYMBOL(dvma_unmap); -EXPORT_SYMBOL(dvma_malloc_align); -EXPORT_SYMBOL(dvma_free); -EXPORT_SYMBOL(idprom); diff --git a/arch/m68k/sun3/sun3dvma.c b/arch/m68k/sun3/sun3dvma.c index a2bc2da7f8f..8709677fa02 100644 --- a/arch/m68k/sun3/sun3dvma.c +++ b/arch/m68k/sun3/sun3dvma.c @@ -6,6 +6,7 @@ * Contains common routines for sun3/sun3x DVMA management. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/mm.h> #include <linux/list.h> @@ -312,6 +313,7 @@ inline unsigned long dvma_map_align(unsigned long kaddr, int len, int align) BUG(); return 0; } +EXPORT_SYMBOL(dvma_map_align); void dvma_unmap(void *baddr) { @@ -327,7 +329,7 @@ void dvma_unmap(void *baddr) return; } - +EXPORT_SYMBOL(dvma_unmap); void *dvma_malloc_align(unsigned long len, unsigned long align) { @@ -367,6 +369,7 @@ void *dvma_malloc_align(unsigned long len, unsigned long align) return (void *)vaddr; } +EXPORT_SYMBOL(dvma_malloc_align); void dvma_free(void *vaddr) { @@ -374,3 +377,4 @@ void dvma_free(void *vaddr) return; } +EXPORT_SYMBOL(dvma_free); diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index bde9811cf98..7b21959eaea 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -62,7 +62,7 @@ int (*mach_kbdrate) (struct kbd_repeat *); void (*mach_kbd_leds) (unsigned int); /* machine dependent irq functions */ void (*mach_init_IRQ) (void); -irqreturn_t (*(*mach_default_handler)[]) (int, void *, struct pt_regs *); +irq_handler_t mach_default_handler; int (*mach_get_irq_list) (struct seq_file *, void *); void (*mach_process_int) (int irq, struct pt_regs *fp); void (*mach_trap_init) (void); diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 617e43ec95a..4603f4f3c93 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -296,10 +296,39 @@ ENTRY(sys_call_table) .long sys_mq_notify /* 275 */ .long sys_mq_getsetattr .long sys_waitid - .long sys_ni_syscall /* sys_setaltroot */ - .long sys_ni_syscall /* sys_add_key */ - .long sys_ni_syscall /* 280 */ /* sys_request_key */ - .long sys_ni_syscall /* sys_keyctl */ + .long sys_ni_syscall /* for sys_vserver */ + .long sys_add_key + .long sys_request_key /* 280 */ + .long sys_keyctl + .long sys_ioprio_set + .long sys_ioprio_get + .long sys_inotify_init + .long sys_inotify_add_watch /* 285 */ + .long sys_inotify_rm_watch + .long sys_migrate_pages + .long sys_openat + .long sys_mkdirat + .long sys_mknodat /* 290 */ + .long sys_fchownat + .long sys_futimesat + .long sys_fstatat64 + .long sys_unlinkat + .long sys_renameat /* 295 */ + .long sys_linkat + .long sys_symlinkat + .long sys_readlinkat + .long sys_fchmodat + .long sys_faccessat /* 300 */ + .long sys_ni_syscall /* Reserved for pselect6 */ + .long sys_ni_syscall /* Reserved for ppoll */ + .long sys_unshare + .long sys_set_robust_list + .long sys_get_robust_list /* 305 */ + .long sys_splice + .long sys_sync_file_range + .long sys_tee + .long sys_vmsplice + .long sys_move_pages /* 310 */ .rept NR_syscalls-(.-sys_call_table)/4 .long sys_ni_syscall diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index c5667bdddd5..9226264abf1 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -54,7 +54,7 @@ static irqreturn_t timer_interrupt(int irq, void *dummy, struct pt_regs * regs) update_process_times(user_mode(regs)); #endif if (current->pid) - profile_tick(CPU_PROFILING, regs); + profile_tick(CPU_PROFILING); /* * If we have an externally synchronized Linux clock, then update diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S index ccd2ceb05cf..58afa8be604 100644 --- a/arch/m68knommu/kernel/vmlinux.lds.S +++ b/arch/m68knommu/kernel/vmlinux.lds.S @@ -140,13 +140,7 @@ SECTIONS { *(.init.setup) __setup_end = .; __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS __initcall_end = .; __con_initcall_start = .; *(.con_initcall.init) diff --git a/arch/m68knommu/platform/5307/ints.c b/arch/m68knommu/platform/5307/ints.c index b4b55093ae7..a57239ec6c8 100644 --- a/arch/m68knommu/platform/5307/ints.c +++ b/arch/m68knommu/platform/5307/ints.c @@ -33,7 +33,7 @@ /* * This table stores the address info for each vector handler. */ -irq_handler_t irq_list[SYS_IRQS]; +struct irq_entry irq_list[SYS_IRQS]; #define NUM_IRQ_NODES 16 static irq_node_t nodes[NUM_IRQ_NODES]; @@ -44,7 +44,7 @@ volatile unsigned int num_spurious; unsigned int local_bh_count[NR_CPUS]; unsigned int local_irq_count[NR_CPUS]; -static irqreturn_t default_irq_handler(int irq, void *ptr, struct pt_regs *regs) +static irqreturn_t default_irq_handler(int irq, void *ptr) { #if 1 printk(KERN_INFO "%s(%d): default irq handler vec=%d [0x%x]\n", @@ -70,7 +70,7 @@ void __init init_IRQ(void) for (i = 0; i < SYS_IRQS; i++) { if (mach_default_handler) - irq_list[i].handler = (*mach_default_handler)[i]; + irq_list[i].handler = mach_default_handler; else irq_list[i].handler = default_irq_handler; irq_list[i].flags = IRQ_FLG_STD; @@ -100,7 +100,7 @@ irq_node_t *new_irq_node(void) int request_irq( unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), + irq_handler_t handler, unsigned long flags, const char *devname, void *dev_id) @@ -157,7 +157,7 @@ void free_irq(unsigned int irq, void *dev_id) } if (mach_default_handler) - irq_list[irq].handler = (*mach_default_handler)[irq]; + irq_list[irq].handler = mach_default_handler; else irq_list[irq].handler = default_irq_handler; irq_list[irq].flags = IRQ_FLG_STD; @@ -168,8 +168,7 @@ void free_irq(unsigned int irq, void *dev_id) EXPORT_SYMBOL(free_irq); -int sys_request_irq(unsigned int irq, - irqreturn_t (*handler)(int, void *, struct pt_regs *), +int sys_request_irq(unsigned int irq, irq_handler_t handler, unsigned long flags, const char *devname, void *dev_id) { if (irq > IRQ7) { @@ -211,7 +210,7 @@ void sys_free_irq(unsigned int irq, void *dev_id) printk(KERN_WARNING "%s: Removing probably wrong IRQ %d from %s\n", __FUNCTION__, irq, irq_list[irq].devname); - irq_list[irq].handler = (*mach_default_handler)[irq]; + irq_list[irq].handler = mach_default_handler; irq_list[irq].flags = 0; irq_list[irq].dev_id = NULL; irq_list[irq].devname = NULL; @@ -241,7 +240,7 @@ asmlinkage void process_int(unsigned long vec, struct pt_regs *fp) if (vec >= VEC_INT1 && vec <= VEC_INT7) { vec -= VEC_SPUR; kstat_cpu(0).irqs[vec]++; - irq_list[vec].handler(vec, irq_list[vec].dev_id, fp); + irq_list[vec].handler(vec, irq_list[vec].dev_id); } else { if (mach_process_int) mach_process_int(vec, fp); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 14af6cce2fa..1443024b1c7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -425,9 +425,8 @@ config MOMENCO_OCELOT_G select SWAP_IO_SPACE select SYS_HAS_CPU_RM7000 select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL + select SYS_SUPPORTS_64BIT_KERNEL if BROKEN select SYS_SUPPORTS_BIG_ENDIAN - select ARCH_SPARSEMEM_ENABLE help The Ocelot is a MIPS-based Single Board Computer (SBC) made by Momentum Computer <http://www.momenco.com/>. @@ -560,6 +559,7 @@ config SGI_IP27 select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_NUMA + select SYS_SUPPORTS_SMP help This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics workstations. To compile a Linux kernel that runs on these, say Y @@ -1633,9 +1633,6 @@ config ARCH_DISCONTIGMEM_ENABLE config ARCH_SPARSEMEM_ENABLE bool - -config ARCH_SPARSEMEM_ENABLE - bool select SPARSEMEM_STATIC config NUMA @@ -1690,6 +1687,7 @@ config NR_CPUS depends on SMP default "64" if SGI_IP27 default "2" + default "8" if MIPS_MT_SMTC help This allows you to specify the maximum number of CPUs which this kernel will support. The maximum supported value is 32 for 32-bit diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 2124350ab94..d580d46f967 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -63,7 +63,9 @@ cflags-y += -mabi=64 ifdef CONFIG_BUILD_ELF64 cflags-y += $(call cc-option,-mno-explicit-relocs) else -cflags-y += $(call cc-option,-msym32) +# -msym32 can not be used for modules since they are loaded into XKSEG +CFLAGS_MODULE += $(call cc-option,-mno-explicit-relocs) +CFLAGS_KERNEL += $(call cc-option,-msym32) endif endif @@ -91,8 +93,17 @@ cflags-y += -ffreestanding # carefully avoid to add it redundantly because gcc 3.3/3.4 complains # when fed the toolchain default! # -cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB -D__MIPSEB__) -cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL -D__MIPSEL__) +# Certain gcc versions upto gcc 4.1.1 (probably 4.2-subversion as of +# 2006-10-10 don't properly change the the predefined symbols if -EB / -EL +# are used, so we kludge that here. A bug has been filed at +# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=29413. +# +undef-all += -UMIPSEB -U_MIPSEB -U__MIPSEB -U__MIPSEB__ +undef-all += -UMIPSEL -U_MIPSEL -U__MIPSEL -U__MIPSEL__ +predef-be += -DMIPSEB -D_MIPSEB -D__MIPSEB -D__MIPSEB__ +predef-le += -DMIPSEL -D_MIPSEL -D__MIPSEL -D__MIPSEL__ +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB $(undef-all) $(predef-be)) +cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL $(undef-all) $(predef-le)) cflags-$(CONFIG_SB1XXX_CORELIS) += $(call cc-option,-mno-sched-prolog) \ -fno-omit-frame-pointer diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index c4fae8ff467..626de44bd88 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -849,7 +849,7 @@ au1xxx_dbdma_chan_free(u32 chanid) EXPORT_SYMBOL(au1xxx_dbdma_chan_free); static irqreturn_t -dbdma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +dbdma_interrupt(int irq, void *dev_id) { u32 intstat; u32 chan_index; diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c index b4b010a2fe3..6fce60af005 100644 --- a/arch/mips/au1000/common/prom.c +++ b/arch/mips/au1000/common/prom.c @@ -47,7 +47,7 @@ extern int prom_argc; extern char **prom_argv, **prom_envp; -char * prom_getcmdline(void) +char * __init_or_module prom_getcmdline(void) { return &(arcs_cmdline[0]); } diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c index 377ae0d8ff0..919172db560 100644 --- a/arch/mips/au1000/common/setup.c +++ b/arch/mips/au1000/common/setup.c @@ -43,7 +43,7 @@ #include <asm/mach-au1x00/au1000.h> #include <asm/time.h> -extern char * __init prom_getcmdline(void); +extern char * prom_getcmdline(void); extern void __init board_setup(void); extern void au1000_restart(char *); extern void au1000_halt(void); diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 94f09194d63..fa1c62f0551 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -53,9 +53,6 @@ static unsigned long r4k_cur; /* What counter should be at next timer irq */ int no_au1xxx_32khz; extern int allow_au1k_wait; /* default off for CP0 Counter */ -/* Cycle counter value at the previous timer interrupt.. */ -static unsigned int timerhi = 0, timerlo = 0; - #ifdef CONFIG_PM #if HZ < 100 || HZ > 1000 #error "unsupported HZ value! Must be in [100,1000]" @@ -82,7 +79,6 @@ unsigned long wtimer; void mips_timer_interrupt(void) { int irq = 63; - unsigned long count; irq_enter(); kstat_this_cpu.irqs[irq]++; @@ -91,10 +87,6 @@ void mips_timer_interrupt(void) goto null; do { - count = read_c0_count(); - timerhi += (count < timerlo); /* Wrap around */ - timerlo = count; - kstat_this_cpu.irqs[irq]++; do_timer(1); #ifndef CONFIG_SMP @@ -231,7 +223,6 @@ wakeup_counter0_set(int ticks) */ unsigned long cal_r4koff(void) { - unsigned long count; unsigned long cpu_speed; unsigned long flags; unsigned long counter; @@ -258,7 +249,7 @@ unsigned long cal_r4koff(void) #if defined(CONFIG_AU1000_USE32K) { - unsigned long start, end; + unsigned long start, end, count; start = au_readl(SYS_RTCREAD); start += 2; @@ -282,7 +273,6 @@ unsigned long cal_r4koff(void) #else cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; - count = cpu_speed / 2; #endif } else { @@ -291,98 +281,15 @@ unsigned long cal_r4koff(void) * NOTE: some old silicon doesn't allow reading the PLL. */ cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK; - count = cpu_speed / 2; no_au1xxx_32khz = 1; } - mips_hpt_frequency = count; + mips_hpt_frequency = cpu_speed; // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16)); spin_unlock_irqrestore(&time_lock, flags); return (cpu_speed / HZ); } -/* This is for machines which generate the exact clock. */ -#define USECS_PER_JIFFY (1000000/HZ) -#define USECS_PER_JIFFY_FRAC (0x100000000LL*1000000/HZ&0xffffffff) - -static unsigned long -div64_32(unsigned long v1, unsigned long v2, unsigned long v3) -{ - unsigned long r0; - do_div64_32(r0, v1, v2, v3); - return r0; -} - -static unsigned long do_fast_cp0_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long r0; - - /* Last jiffy when do_fast_gettimeoffset() was called. */ - static unsigned long last_jiffies=0; - unsigned long quotient; - - /* - * Cached "1/(clocks per usec)*2^32" value. - * It has to be recalculated once each jiffy. - */ - static unsigned long cached_quotient=0; - - tmp = jiffies; - - quotient = cached_quotient; - - if (tmp && last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies != 0) { - r0 = div64_32(timerhi, timerlo, tmp); - quotient = div64_32(USECS_PER_JIFFY, USECS_PER_JIFFY_FRAC, r0); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = read_c0_count(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu\t%1,%2\n\t" - "mfhi\t%0" - : "=r" (res) - : "r" (count), "r" (quotient) - : "hi", "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY-1; - - return res; -} - -#ifdef CONFIG_PM -static unsigned long do_fast_pm_gettimeoffset(void) -{ - unsigned long pc0; - unsigned long offset; - - pc0 = au_readl(SYS_TOYREAD); - au_sync(); - offset = pc0 - last_pc0; - if (offset > 2*MATCH20_INC) { - printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n", - (unsigned)offset, (unsigned)last_pc0, - (unsigned)last_match20, (unsigned)pc0); - } - offset = (unsigned long)((offset * 305) / 10); - return offset; -} -#endif - void __init plat_timer_setup(struct irqaction *irq) { unsigned int est_freq; @@ -420,7 +327,6 @@ void __init plat_timer_setup(struct irqaction *irq) unsigned int c0_status; printk("WARNING: no 32KHz clock found.\n"); - do_gettimeoffset = do_fast_cp0_gettimeoffset; /* Ensure we get CPO_COUNTER interrupts. */ @@ -445,19 +351,11 @@ void __init plat_timer_setup(struct irqaction *irq) while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); startup_match20_interrupt(counter0_irq); - do_gettimeoffset = do_fast_pm_gettimeoffset; - /* We can use the real 'wait' instruction. */ allow_au1k_wait = 1; } -#else - /* We have to do this here instead of in timer_init because - * the generic code in arch/mips/kernel/time.c will write - * over our function pointer. - */ - do_gettimeoffset = do_fast_cp0_gettimeoffset; #endif } diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index c6a015940b4..ba3bf733d27 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:02:58 2006 +# Linux kernel version: 2.6.19-rc1 +# Wed Oct 11 01:41:41 2006 # CONFIG_MIPS=y @@ -25,8 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -83,6 +81,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_DMA_COHERENT=y CONFIG_CPU_BIG_ENDIAN=y @@ -132,8 +131,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_64KB is not set # CONFIG_SIBYTE_DMA_PAGEOPS is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y @@ -185,9 +184,11 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y @@ -195,7 +196,9 @@ CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -204,12 +207,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -228,6 +231,7 @@ CONFIG_STOP_MACHINE=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # @@ -249,18 +253,17 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_HW_HAS_PCI=y CONFIG_PCI=y CONFIG_PCI_DOMAINS=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_PCI_DEBUG=y CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support # -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -271,7 +274,7 @@ CONFIG_BINFMT_ELF=y CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_MIPS32_O32=y -# CONFIG_MIPS32_N32 is not set +CONFIG_MIPS32_N32=y CONFIG_BINFMT_ELF32=y # @@ -288,6 +291,7 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set CONFIG_NET_KEY=y CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -308,10 +312,12 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -341,7 +347,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -368,7 +373,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_SYS_HYPERVISOR is not set @@ -404,7 +408,7 @@ CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -412,6 +416,7 @@ CONFIG_BLK_DEV_NBD=m # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -429,10 +434,40 @@ CONFIG_BLK_DEV_IDEFLOPPY=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +CONFIG_BLK_DEV_IDEPCI=y +# CONFIG_IDEPCI_SHARE_IRQ is not set +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_IDE_SWARM is not set # CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -441,6 +476,12 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_NETLINK is not set + +# +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set # # Multi-device support (RAID and LVM) @@ -516,6 +557,7 @@ CONFIG_NET_SB1250_MAC=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -650,7 +692,6 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_ALGOBIT is not set # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set -CONFIG_I2C_ALGO_SIBYTE=y # # I2C Hardware Bus support @@ -712,12 +753,12 @@ CONFIG_I2C_DEBUG_CHIP=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -729,6 +770,7 @@ CONFIG_VIDEO_V4L2=y # # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -811,6 +853,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -840,8 +883,10 @@ CONFIG_DNOTIFY=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -851,6 +896,7 @@ CONFIG_RAMFS=y # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set +# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -881,7 +927,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -899,6 +944,10 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# + +# # Profiling support # # CONFIG_PROFILING is not set @@ -907,7 +956,8 @@ CONFIG_MSDOS_PARTITION=y # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y @@ -920,12 +970,15 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y @@ -946,6 +999,10 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_MD4=y @@ -955,9 +1012,12 @@ CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=y CONFIG_CRYPTO_TWOFISH=y +CONFIG_CRYPTO_TWOFISH_COMMON=y CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_AES=m # CONFIG_CRYPTO_CAST5 is not set diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig index 26b0b988349..280a8001eac 100644 --- a/arch/mips/configs/pnx8550-jbs_defconfig +++ b/arch/mips/configs/pnx8550-jbs_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:18 2006 +# Linux kernel version: 2.6.19-rc2 +# Sat Oct 14 23:01:16 2006 # CONFIG_MIPS=y @@ -25,8 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -41,13 +39,13 @@ CONFIG_MIPS=y # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set # CONFIG_PNX8550_V2PCI is not set -# CONFIG_PNX8550_JBS is not set +CONFIG_PNX8550_JBS=y # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set # CONFIG_MARKEINS is not set -CONFIG_SGI_IP22=y +# CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_BIGSUR is not set @@ -67,25 +65,21 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_ARC32=y -CONFIG_BOOT_ELF32=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_PNX8550=y +CONFIG_SOC_PNX8550=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_ARC_CONSOLE is not set -CONFIG_ARC_PROMLIB=y # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -93,7 +87,7 @@ CONFIG_ARC_PROMLIB=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -104,12 +98,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y -CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -120,17 +113,17 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_IP22_CPU_SCACHE=y +CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -144,12 +137,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -171,16 +164,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -189,12 +186,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -211,6 +208,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -231,8 +229,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # -CONFIG_HW_HAS_EISA=y -# CONFIG_EISA is not set +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_PCI_DEBUG is not set CONFIG_MMU=y # @@ -243,6 +243,7 @@ CONFIG_MMU=y # # PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -265,6 +266,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -283,16 +285,18 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -318,7 +322,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -371,13 +374,20 @@ CONFIG_FW_LOADER=y # # Block devices # +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -386,6 +396,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -404,8 +415,39 @@ CONFIG_BLK_DEV_IDESCSI=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_OFFBOARD=y +CONFIG_BLK_DEV_GENERIC=y +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +# CONFIG_IDEDMA_PCI_AUTO is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +CONFIG_BLK_DEV_HPT366=y +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set # CONFIG_IDEDMA_AUTO is not set # CONFIG_BLK_DEV_HD is not set @@ -414,6 +456,7 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -434,22 +477,54 @@ CONFIG_SCSI_CONSTANTS=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # CONFIG_ISCSI_TCP=m -# CONFIG_SGIWD93_SCSI is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -458,14 +533,19 @@ CONFIG_ISCSI_TCP=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # +# CONFIG_IEEE1394 is not set # # I2O device support # +# CONFIG_I2O is not set # # Network device support @@ -477,6 +557,11 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# # PHY device support # # CONFIG_PHYLIB is not set @@ -486,20 +571,73 @@ CONFIG_NETDEVICES=y # CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set -# CONFIG_SGISEEQ is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +CONFIG_8139TOO_TUNE_TWISTER=y +CONFIG_8139TOO_8129=y +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_LAN_SAA9730 is not set # # Ethernet (1000 Mbit) # +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -510,8 +648,11 @@ CONFIG_MII=y # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -531,6 +672,7 @@ CONFIG_MII=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -556,6 +698,7 @@ CONFIG_INPUT=y CONFIG_SERIO=y # CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -566,7 +709,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -577,7 +720,8 @@ CONFIG_VT_HW_CONSOLE_BINDING=y # # Non-8250 serial port support # -# CONFIG_SERIAL_IP22_ZILOG is not set +# CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -591,16 +735,17 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_SGI_DS1286 is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # +# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -631,35 +776,37 @@ CONFIG_HWMON=y # CONFIG_HWMON_VID is not set # CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_HWMON_DEBUG_CHIP is not set # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIRMWARE_EDID=y # CONFIG_FB is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_SGI_NEWPORT_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Sound @@ -669,15 +816,131 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +CONFIG_USB_STORAGE_DATAFAB=y +CONFIG_USB_STORAGE_FREECOM=y +CONFIG_USB_STORAGE_ISD200=y +CONFIG_USB_STORAGE_DPCM=y +CONFIG_USB_STORAGE_USBAT=y +CONFIG_USB_STORAGE_SDDR09=y +CONFIG_USB_STORAGE_SDDR55=y +CONFIG_USB_STORAGE_JUMPSHOT=y +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_TRANCEVIBRATOR is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set + +# +# USB DSL modem support +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -703,6 +966,7 @@ CONFIG_DUMMY_CONSOLE=y # # InfiniBand support # +# CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -733,10 +997,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -769,8 +1035,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -813,7 +1081,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -824,7 +1091,6 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_SGI_PARTITION=y # # Native Language Support @@ -880,6 +1146,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y @@ -893,13 +1160,17 @@ CONFIG_DEBUG_SLAB=y # CONFIG_DEBUG_SPINLOCK is not set CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" @@ -918,6 +1189,9 @@ CONFIG_CMDLINE="console=ttyS1,38400n8 kgdb=ttyS0 root=/dev/nfs ip=bootp" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -927,6 +1201,8 @@ CONFIG_CRYPTO_MD5=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig index e93266b37dd..64b9fbf44a6 100644 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ b/arch/mips/configs/pnx8550-v2pci_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:18 2006 +# Linux kernel version: 2.6.19-rc2 +# Sat Oct 14 23:12:15 2006 # CONFIG_MIPS=y @@ -25,8 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -40,14 +38,14 @@ CONFIG_MIPS=y # CONFIG_MOMENCO_OCELOT_C is not set # CONFIG_MOMENCO_OCELOT_G is not set # CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_V2PCI is not set +CONFIG_PNX8550_V2PCI=y # CONFIG_PNX8550_JBS is not set # CONFIG_DDB5477 is not set # CONFIG_MACH_VR41XX is not set # CONFIG_PMC_YOSEMITE is not set # CONFIG_QEMU is not set # CONFIG_MARKEINS is not set -CONFIG_SGI_IP22=y +# CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_BIGSUR is not set @@ -67,25 +65,21 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_ARC=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_ARC32=y -CONFIG_BOOT_ELF32=y +# CONFIG_CPU_BIG_ENDIAN is not set +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_PNX8550=y +CONFIG_SOC_PNX8550=y CONFIG_MIPS_L1_CACHE_SHIFT=5 -# CONFIG_ARC_CONSOLE is not set -CONFIG_ARC_PROMLIB=y # # CPU selection # -# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R1=y # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set # CONFIG_CPU_MIPS64_R2 is not set @@ -93,7 +87,7 @@ CONFIG_ARC_PROMLIB=y # CONFIG_CPU_TX39XX is not set # CONFIG_CPU_VR41XX is not set # CONFIG_CPU_R4300 is not set -CONFIG_CPU_R4X00=y +# CONFIG_CPU_R4X00 is not set # CONFIG_CPU_TX49XX is not set # CONFIG_CPU_R5000 is not set # CONFIG_CPU_R5432 is not set @@ -104,12 +98,11 @@ CONFIG_CPU_R4X00=y # CONFIG_CPU_RM7000 is not set # CONFIG_CPU_RM9000 is not set # CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_R4X00=y -CONFIG_SYS_HAS_CPU_R5000=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y # # Kernel type @@ -120,17 +113,17 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set -CONFIG_BOARD_SCACHE=y -CONFIG_IP22_CPU_SCACHE=y +CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set # CONFIG_64BIT_PHYS_ADDR is not set CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y @@ -144,12 +137,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -171,16 +164,20 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -188,12 +185,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -210,6 +207,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -230,8 +228,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # -CONFIG_HW_HAS_EISA=y -# CONFIG_EISA is not set +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_MMU=y # @@ -242,6 +241,7 @@ CONFIG_MMU=y # # PCI Hotplug Support # +# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -264,6 +264,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -282,12 +283,14 @@ CONFIG_IP_PNP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" # # IP: Virtual Server Configuration @@ -300,12 +303,18 @@ CONFIG_IPV6_ROUTE_INFO=y # CONFIG_INET6_AH is not set # CONFIG_INET6_ESP is not set # CONFIG_INET6_IPCOMP is not set +# CONFIG_IPV6_MIP6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m # CONFIG_IPV6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_IPV6_SUBTREES is not set +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -318,9 +327,9 @@ CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_SECMARK=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_DCCP=m +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m @@ -329,10 +338,10 @@ CONFIG_NETFILTER_XT_MATCH_MARK=m # CONFIG_NETFILTER_XT_MATCH_POLICY is not set CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m @@ -373,7 +382,6 @@ CONFIG_NETFILTER_XT_MATCH_TCPMSS=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -426,13 +434,20 @@ CONFIG_FW_LOADER=y # # Block devices # +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_INITRD=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -441,6 +456,7 @@ CONFIG_BLK_DEV_INITRD=y # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y +CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # @@ -459,9 +475,41 @@ CONFIG_IDEDISK_MULTI_MODE=y # IDE chipset support/bugfixes # CONFIG_IDE_GENERIC=y +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +CONFIG_BLK_DEV_CMD64X=y +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_IDE_ARM is not set -# CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y # CONFIG_BLK_DEV_HD is not set # @@ -469,6 +517,7 @@ CONFIG_IDE_GENERIC=y # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_NETLINK=y CONFIG_SCSI_PROC_FS=y # @@ -489,22 +538,59 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # CONFIG_SCSI_SPI_ATTRS=m CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_ISCSI_ATTRS=m # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers # CONFIG_ISCSI_TCP=m -# CONFIG_SGIWD93_SCSI is not set -# CONFIG_SCSI_SATA is not set +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AACRAID is not set +CONFIG_SCSI_AIC7XXX=m +CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 +CONFIG_AIC7XXX_RESET_DELAY_MS=15000 +# CONFIG_AIC7XXX_DEBUG_ENABLE is not set +CONFIG_AIC7XXX_DEBUG_MASK=0 +# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_HPTIOP is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +# CONFIG_ATA is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -513,14 +599,19 @@ CONFIG_ISCSI_TCP=m # Fusion MPT device support # # CONFIG_FUSION is not set +# CONFIG_FUSION_SPI is not set +# CONFIG_FUSION_FC is not set +# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # +# CONFIG_IEEE1394 is not set # # I2O device support # +# CONFIG_I2O is not set # # Network device support @@ -532,6 +623,11 @@ CONFIG_NETDEVICES=y CONFIG_TUN=m # +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# # PHY device support # # CONFIG_PHYLIB is not set @@ -541,20 +637,73 @@ CONFIG_TUN=m # CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set -# CONFIG_SGISEEQ is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=y +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=y +# CONFIG_8139TOO_PIO is not set +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_LAN_SAA9730 is not set # # Ethernet (1000 Mbit) # +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) # +# CONFIG_CHELSIO_T1 is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set # # Token Ring devices # +# CONFIG_TR is not set # # Wireless LAN (non-hamradio) @@ -565,6 +714,8 @@ CONFIG_MII=y # Wan interfaces # # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set # CONFIG_PPP_FILTER is not set @@ -575,6 +726,8 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_MPPE=m # CONFIG_PPPOE is not set # CONFIG_SLIP is not set +CONFIG_SLHC=m +# CONFIG_NET_FC is not set # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set @@ -594,6 +747,7 @@ CONFIG_PPP_MPPE=m # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -616,6 +770,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set @@ -630,6 +785,7 @@ CONFIG_MOUSE_PS2=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_PCIPS2 is not set CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set # CONFIG_GAMEPORT is not set @@ -640,7 +796,7 @@ CONFIG_SERIO_LIBPS2=y CONFIG_VT=y # CONFIG_VT_CONSOLE is not set CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -650,6 +806,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_SMARTIO is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set +# CONFIG_SYNCLINK_GT is not set # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set @@ -665,7 +822,8 @@ CONFIG_SERIAL_NONSTANDARD=y # # Non-8250 serial port support # -# CONFIG_SERIAL_IP22_ZILOG is not set +# CONFIG_SERIAL_IP3106 is not set +# CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 @@ -679,16 +837,17 @@ CONFIG_LEGACY_PTY_COUNT=256 # Watchdog Cards # # CONFIG_WATCHDOG is not set -# CONFIG_HW_RANDOM is not set +CONFIG_HW_RANDOM=y # CONFIG_RTC is not set -# CONFIG_SGI_DS1286 is not set # CONFIG_GEN_RTC is not set # CONFIG_DTLK is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # # Ftape, the floppy tape device driver # +# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # @@ -709,14 +868,30 @@ CONFIG_I2C_CHARDEV=m CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_ALGOPCF is not set # CONFIG_I2C_ALGOPCA is not set -# CONFIG_I2C_ALGO_SGI is not set # # I2C Hardware Bus support # +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set # CONFIG_I2C_PCA_ISA is not set # @@ -776,9 +951,13 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set @@ -790,23 +969,25 @@ CONFIG_HWMON=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set +# CONFIG_USB_DABUSB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +CONFIG_FIRMWARE_EDID=y CONFIG_FB=y +# CONFIG_FB_DDC is not set # CONFIG_FB_CFB_FILLRECT is not set # CONFIG_FB_CFB_COPYAREA is not set # CONFIG_FB_CFB_IMAGEBLIT is not set @@ -814,14 +995,32 @@ CONFIG_FB=y # CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set # CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_SMIVGX is not set +# CONFIG_FB_TRIDENT is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # # CONFIG_VGA_CONSOLE is not set -# CONFIG_SGI_NEWPORT_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set @@ -839,15 +1038,129 @@ CONFIG_DUMMY_CONSOLE=y # # USB support # -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_OHCI_HCD is not set +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # +# may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=y +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +CONFIG_USB_HIDINPUT=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +CONFIG_USB_HIDDEV=y +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_ACECAD is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_TOUCHSCREEN is not set +# CONFIG_USB_YEALINK is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set +# CONFIG_USB_ATI_REMOTE2 is not set +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_TRANCEVIBRATOR is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# # USB Gadget Support # # CONFIG_USB_GADGET is not set @@ -873,6 +1186,7 @@ CONFIG_DUMMY_CONSOLE=y # # InfiniBand support # +# CONFIG_INFINIBAND is not set # # EDAC - error detection and reporting (RAS) (EXPERIMENTAL) @@ -906,6 +1220,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -917,6 +1232,7 @@ CONFIG_XFS_FS=m # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -949,8 +1265,10 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -994,7 +1312,6 @@ CONFIG_SUNRPC=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1005,7 +1322,6 @@ CONFIG_SMB_FS=m # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -CONFIG_SGI_PARTITION=y # # Native Language Support @@ -1061,11 +1377,13 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="" @@ -1079,6 +1397,9 @@ CONFIG_CMDLINE="" # Cryptographic options # CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_MANAGER=m # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1088,6 +1409,8 @@ CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_CBC=m # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index ad7271b3f26..f7e8194809a 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18-rc1 -# Thu Jul 6 10:04:21 2006 +# Linux kernel version: 2.6.19-rc2 +# Wed Oct 18 12:57:11 2006 # CONFIG_MIPS=y @@ -25,8 +25,6 @@ CONFIG_MIPS=y # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MIPS_EV64120 is not set -# CONFIG_MIPS_IVR is not set -# CONFIG_MIPS_ITE8172 is not set # CONFIG_MACH_JAZZ is not set # CONFIG_LASAT is not set # CONFIG_MIPS_ATLAS is not set @@ -72,11 +70,11 @@ CONFIG_TANBAC_TB0287=y # CONFIG_VICTOR_MPC30X is not set # CONFIG_ZAO_CAPCELLA is not set CONFIG_PCI_VR41XX=y -# CONFIG_VRC4173 is not set CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y @@ -123,8 +121,8 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set # CONFIG_MIPS_VPE_LOADER is not set CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -169,15 +167,19 @@ CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +# CONFIG_IPC_NS is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set +# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set # CONFIG_RELAY is not set CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +# CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set # CONFIG_HOTPLUG is not set @@ -185,12 +187,12 @@ CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y -CONFIG_RT_MUTEXES=y CONFIG_FUTEX=y CONFIG_EPOLL=y CONFIG_SHMEM=y CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_SLOB is not set @@ -208,6 +210,7 @@ CONFIG_KMOD=y # # Block layer # +CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set @@ -230,17 +233,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +# CONFIG_PCI_MULTITHREAD_PROBE is not set CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support # -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -263,6 +265,7 @@ CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -291,13 +294,10 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y - -# -# TCP congestion control -# CONFIG_TCP_CONG_BIC=y CONFIG_TCP_CONG_CUBIC=m CONFIG_TCP_CONG_WESTWOOD=m @@ -308,7 +308,13 @@ CONFIG_TCP_CONG_HTCP=m # CONFIG_TCP_CONG_SCALABLE is not set # CONFIG_TCP_CONG_LP is not set # CONFIG_TCP_CONG_VENO is not set -# CONFIG_TCP_CONG_COMPOUND is not set +CONFIG_DEFAULT_BIC=y +# CONFIG_DEFAULT_CUBIC is not set +# CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_WESTWOOD is not set +# CONFIG_DEFAULT_RENO is not set +CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set @@ -338,7 +344,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -355,6 +360,7 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_IEEE80211 is not set +CONFIG_FIB_RULES=y # # Device Drivers @@ -365,7 +371,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set # @@ -403,6 +408,7 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set @@ -410,65 +416,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # ATA/ATAPI/MFM/RLL support # -CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -# CONFIG_IDEPCI_SHARE_IRQ is not set -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -# CONFIG_IDEDMA_PCI_AUTO is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=y -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -489,12 +444,13 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOGGING is not set # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_ATTRS is not set +# CONFIG_SCSI_SAS_LIBSAS is not set # # SCSI low-level drivers @@ -507,21 +463,24 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_AIC7XXX is not set # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_AIC94XX is not set # CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -529,6 +488,59 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_DEBUG is not set # +# Serial ATA (prod) and Parallel ATA (experimental) drivers +# +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +CONFIG_PATA_SIL680=y +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set + +# # Multi-device support (RAID and LVM) # # CONFIG_MD is not set @@ -632,6 +644,7 @@ CONFIG_R8169=y # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set # # Ethernet (10000 Mbit) @@ -679,6 +692,7 @@ CONFIG_R8169=y # Input device support # CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set # # Userland interfaces @@ -758,7 +772,6 @@ CONFIG_GPIO_VR41XX=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -784,12 +797,12 @@ CONFIG_GPIO_VR41XX=y # # Misc devices # +# CONFIG_TIFM_CORE is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -897,13 +910,13 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_LIBUSUAL is not set # @@ -932,6 +945,7 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -963,16 +977,17 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set -# CONFIG_USB_CY7C63 is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGETKIT is not set -# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set @@ -1041,6 +1056,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1052,6 +1068,7 @@ CONFIG_XFS_QUOTA=y # CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=m @@ -1082,8 +1099,10 @@ CONFIG_AUTOFS4_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set @@ -1123,7 +1142,6 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set -# CONFIG_CIFS_DEBUG2 is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1150,11 +1168,13 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_KERNEL is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_CROSSCOMPILE=y CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" @@ -1170,10 +1190,6 @@ CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 4cf0c06e241..69e424e9ab6 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -160,11 +160,6 @@ static unsigned int dec_ioasic_hpt_read(void) return ioasic_read(IO_REG_FCTR); } -static void dec_ioasic_hpt_init(unsigned int count) -{ - ioasic_write(IO_REG_FCTR, ioasic_read(IO_REG_FCTR) - count); -} - void __init dec_time_init(void) { @@ -174,11 +169,9 @@ void __init dec_time_init(void) mips_timer_state = dec_timer_state; mips_timer_ack = dec_timer_ack; - if (!cpu_has_counter && IOASIC) { + if (!cpu_has_counter && IOASIC) /* For pre-R4k systems we use the I/O ASIC's counter. */ mips_hpt_read = dec_ioasic_hpt_read; - mips_hpt_init = dec_ioasic_hpt_init; - } /* Set up the rate of periodic DS1287 interrupts. */ CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); diff --git a/arch/mips/emma2rh/common/irq_emma2rh.c b/arch/mips/emma2rh/common/irq_emma2rh.c index 7c930860c92..197ed4c2ba0 100644 --- a/arch/mips/emma2rh/common/irq_emma2rh.c +++ b/arch/mips/emma2rh/common/irq_emma2rh.c @@ -97,7 +97,7 @@ void emma2rh_irq_init(u32 irq_base) irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 1; - irq_desc[i].handler = &emma2rh_irq_controller; + irq_desc[i].chip = &emma2rh_irq_controller; } emma2rh_irq_base = irq_base; diff --git a/arch/mips/emma2rh/markeins/irq_markeins.c b/arch/mips/emma2rh/markeins/irq_markeins.c index f23ae9fcffa..0b36eb001e6 100644 --- a/arch/mips/emma2rh/markeins/irq_markeins.c +++ b/arch/mips/emma2rh/markeins/irq_markeins.c @@ -86,7 +86,7 @@ void emma2rh_sw_irq_init(u32 irq_base) irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 2; - irq_desc[i].handler = &emma2rh_sw_irq_controller; + irq_desc[i].chip = &emma2rh_sw_irq_controller; } emma2rh_sw_irq_base = irq_base; @@ -166,7 +166,7 @@ void emma2rh_gpio_irq_init(u32 irq_base) irq_desc[i].status = IRQ_DISABLED; irq_desc[i].action = NULL; irq_desc[i].depth = 2; - irq_desc[i].handler = &emma2rh_gpio_irq_controller; + irq_desc[i].chip = &emma2rh_gpio_irq_controller; } emma2rh_gpio_irq_base = irq_base; diff --git a/arch/mips/emma2rh/markeins/platform.c b/arch/mips/emma2rh/markeins/platform.c index 15cc61df362..11567702b15 100644 --- a/arch/mips/emma2rh/markeins/platform.c +++ b/arch/mips/emma2rh/markeins/platform.c @@ -44,18 +44,45 @@ #define I2C_EMMA2RH "emma2rh-iic" /* must be in sync with IIC driver */ static struct resource i2c_emma_resources_0[] = { - { NULL, EMMA2RH_IRQ_PIIC0, EMMA2RH_IRQ_PIIC0, IORESOURCE_IRQ }, - { NULL, KSEG1ADDR(EMMA2RH_PIIC0_BASE), KSEG1ADDR(EMMA2RH_PIIC0_BASE + 0x1000), 0 }, + { + .name = NULL, + .start = EMMA2RH_IRQ_PIIC0, + .end = EMMA2RH_IRQ_PIIC0, + .flags = IORESOURCE_IRQ + }, { + .name = NULL, + .start = EMMA2RH_PIIC0_BASE, + .end = EMMA2RH_PIIC0_BASE + 0x1000, + .flags = 0 + }, }; struct resource i2c_emma_resources_1[] = { - { NULL, EMMA2RH_IRQ_PIIC1, EMMA2RH_IRQ_PIIC1, IORESOURCE_IRQ }, - { NULL, KSEG1ADDR(EMMA2RH_PIIC1_BASE), KSEG1ADDR(EMMA2RH_PIIC1_BASE + 0x1000), 0 }, + { + .name = NULL, + .start = EMMA2RH_IRQ_PIIC1, + .end = EMMA2RH_IRQ_PIIC1, + .flags = IORESOURCE_IRQ + }, { + .name = NULL, + .start = EMMA2RH_PIIC1_BASE, + .end = EMMA2RH_PIIC1_BASE + 0x1000, + .flags = 0 + }, }; struct resource i2c_emma_resources_2[] = { - { NULL, EMMA2RH_IRQ_PIIC2, EMMA2RH_IRQ_PIIC2, IORESOURCE_IRQ }, - { NULL, KSEG1ADDR(EMMA2RH_PIIC2_BASE), KSEG1ADDR(EMMA2RH_PIIC2_BASE + 0x1000), 0 }, + { + .name = NULL, + .start = EMMA2RH_IRQ_PIIC2, + .end = EMMA2RH_IRQ_PIIC2, + .flags = IORESOURCE_IRQ + }, { + .name = NULL, + .start = EMMA2RH_PIIC2_BASE, + .end = EMMA2RH_PIIC2_BASE + 0x1000, + .flags = 0 + }, }; struct platform_device i2c_emma_devices[] = { @@ -83,32 +110,29 @@ struct platform_device i2c_emma_devices[] = { #define EMMA2RH_SERIAL_FLAGS UPF_BOOT_AUTOCONF | UPF_SKIP_TEST static struct plat_serial8250_port platform_serial_ports[] = { - [0] = { - .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3), - .irq = EMMA2RH_IRQ_PFUR0, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, - [1] = { - .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3), - .irq = EMMA2RH_IRQ_PFUR1, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, - [2] = { - .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3), - .irq = EMMA2RH_IRQ_PFUR2, - .uartclk = EMMA2RH_SERIAL_CLOCK, - .regshift = 4, - .iotype = UPIO_MEM, - .flags = EMMA2RH_SERIAL_FLAGS, - }, - [3] = { - .flags = 0, + [0] = { + .membase= (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR0_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR0, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, [1] = { + .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR1_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR1, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, [2] = { + .membase = (void __iomem*)KSEG1ADDR(EMMA2RH_PFUR2_BASE + 3), + .irq = EMMA2RH_IRQ_PFUR2, + .uartclk = EMMA2RH_SERIAL_CLOCK, + .regshift = 4, + .iotype = UPIO_MEM, + .flags = EMMA2RH_SERIAL_FLAGS, + }, [3] = { + .flags = 0, }, }; diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c index c83ae6acd60..c47eeb76819 100644 --- a/arch/mips/gt64120/common/time.c +++ b/arch/mips/gt64120/common/time.c @@ -64,14 +64,14 @@ static irqreturn_t gt64120_irq(int irq, void *dev_id) * as *irq (=irq0 in ../kernel/time.c). We will do our own timer interrupt * handling. */ -void gt64120_time_init(void) +void __init plat_timer_setup(struct irqaction *irq) { static struct irqaction timer; /* Disable timer first */ GT_WRITE(GT_TC_CONTROL_OFS, 0); /* Load timer value for 100 Hz */ - GT_WRITE(GT_TC3_OFS, Sys_clock / 100); + GT_WRITE(GT_TC3_OFS, Sys_clock / HZ); /* * Create the IRQ structure entry for the timer. Since we're too early diff --git a/arch/mips/gt64120/ev64120/setup.c b/arch/mips/gt64120/ev64120/setup.c index 91c2d3f4161..99c8d42212e 100644 --- a/arch/mips/gt64120/ev64120/setup.c +++ b/arch/mips/gt64120/ev64120/setup.c @@ -68,7 +68,6 @@ unsigned long __init prom_free_prom_memory(void) * Initializes basic routines and structures pointers, memory size (as * given by the bios and saves the command line. */ -extern void gt64120_time_init(void); void __init plat_mem_setup(void) { @@ -76,7 +75,6 @@ void __init plat_mem_setup(void) _machine_halt = galileo_machine_halt; pm_power_off = galileo_machine_power_off; - board_time_init = gt64120_time_init; set_io_port_base(KSEG1); } diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c index 0e5bbee2d5b..94f94ebbda6 100644 --- a/arch/mips/gt64120/momenco_ocelot/setup.c +++ b/arch/mips/gt64120/momenco_ocelot/setup.c @@ -70,7 +70,6 @@ extern void momenco_ocelot_restart(char *command); extern void momenco_ocelot_halt(void); extern void momenco_ocelot_power_off(void); -extern void gt64120_time_init(void); extern void momenco_ocelot_irq_setup(void); static char reset_reason; @@ -156,8 +155,6 @@ void __init plat_mem_setup(void) void (*l3func)(unsigned long)=KSEG1ADDR(&setup_l3cache); unsigned int tmpword; - board_time_init = gt64120_time_init; - _machine_restart = momenco_ocelot_restart; _machine_halt = momenco_ocelot_halt; pm_power_off = momenco_ocelot_power_off; diff --git a/arch/mips/jazz/setup.c b/arch/mips/jazz/setup.c index 6dc4135d6e1..d848f1a0778 100644 --- a/arch/mips/jazz/setup.c +++ b/arch/mips/jazz/setup.c @@ -37,7 +37,7 @@ extern void jazz_machine_restart(char *command); extern void jazz_machine_halt(void); extern void jazz_machine_power_off(void); -void __init plat_time_init(struct irqaction *irq) +void __init plat_timer_setup(struct irqaction *irq) { /* set the clock to 100 Hz */ r4030_write_reg32(JAZZ_TIMER_INTERVAL, 9); diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 39a0243bed9..de4a238c28b 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -288,6 +288,8 @@ static void tx_branch_likely_bug_fixup(void) static void jmr3927_spurious(void) { + struct pt_regs * regs = get_irq_regs(); + #ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND tx_branch_likely_bug_fixup(); #endif @@ -297,6 +299,7 @@ static void jmr3927_spurious(void) asmlinkage void plat_irq_dispatch(void) { + struct pt_regs * regs = get_irq_regs(); int irq; #ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 025434054ed..16e5dfe7aa8 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -170,12 +170,20 @@ static void jmr3927_machine_power_off(void) while (1); } +static unsigned int jmr3927_hpt_read(void) +{ + /* We assume this function is called xtime_lock held. */ + return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr; +} + #define USE_RTC_DS1742 #ifdef USE_RTC_DS1742 extern void rtc_ds1742_init(unsigned long base); #endif static void __init jmr3927_time_init(void) { + mips_hpt_read = jmr3927_hpt_read; + mips_hpt_frequency = JMR3927_TIMER_CLK; #ifdef USE_RTC_DS1742 if (jmr3927_have_nvram()) { rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR); @@ -183,12 +191,8 @@ static void __init jmr3927_time_init(void) #endif } -unsigned long jmr3927_do_gettimeoffset(void); - void __init plat_timer_setup(struct irqaction *irq) { - do_gettimeoffset = jmr3927_do_gettimeoffset; - jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ; jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE; jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD; @@ -200,34 +204,6 @@ void __init plat_timer_setup(struct irqaction *irq) #define USECS_PER_JIFFY (1000000/HZ) -unsigned long jmr3927_do_gettimeoffset(void) -{ - unsigned long count; - unsigned long res = 0; - - /* MUST read TRR before TISR. */ - count = jmr3927_tmrptr->trr; - - if (jmr3927_tmrptr->tisr & TXx927_TMTISR_TIIS) { - /* timer interrupt is pending. use Max value. */ - res = USECS_PER_JIFFY - 1; - } else { - /* convert to usec */ - /* res = count / (JMR3927_TIMER_CLK / 1000000); */ - res = (count << 7) / ((JMR3927_TIMER_CLK << 7) / 1000000); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY-1; - } - - return res; -} - - //#undef DO_WRITE_THROUGH #define DO_WRITE_THROUGH #define DO_ENABLE_CACHE diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index e9ce5b3721a..ff88b06f89d 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -22,7 +22,7 @@ #define offset(string, ptr, member) \ __asm__("\n@@@" string "%0" : : "i" (_offset(ptr, member))) #define constant(string, member) \ - __asm__("\n@@@" string "%x0" : : "ri" (member)) + __asm__("\n@@@" string "%X0" : : "ri" (member)) #define size(string, size) \ __asm__("\n@@@" string "%0" : : "i" (sizeof(size))) #define linefeed text("") diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index 417c08ac76e..f10b6a19f8b 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -83,7 +83,10 @@ FEXPORT(syscall_exit) FEXPORT(restore_all) # restore full frame #ifdef CONFIG_MIPS_MT_SMTC /* Detect and execute deferred IPI "interrupts" */ + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) jal deferred_smtc_ipi + LONG_S s0, TI_REGS($28) /* Re-arm any temporarily masked interrupts not explicitly "acked" */ mfc0 v0, CP0_TCSTATUS ori v1, v0, TCSTATUS_IXMT diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S index 8c6db0fc72f..ddc1b71c937 100644 --- a/arch/mips/kernel/head.S +++ b/arch/mips/kernel/head.S @@ -189,7 +189,8 @@ NESTED(kernel_entry, 16, sp) # kernel entry point MTC0 zero, CP0_CONTEXT # clear context register PTR_LA $28, init_thread_union - PTR_ADDIU sp, $28, _THREAD_SIZE - 32 + PTR_LI sp, _THREAD_SIZE - 32 + PTR_ADDU sp, $28 set_saved_sp sp, t0, t1 PTR_SUBU sp, 4 * SZREG # init stack pointer diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index dd24434392b..9b0e49d63d7 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -26,6 +26,48 @@ #include <asm/system.h> #include <asm/uaccess.h> +static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; + +int __devinit allocate_irqno(void) +{ + int irq; + +again: + irq = find_first_zero_bit(irq_map, NR_IRQS); + + if (irq >= NR_IRQS) + return -ENOSPC; + + if (test_and_set_bit(irq, irq_map)) + goto again; + + return irq; +} + +EXPORT_SYMBOL_GPL(allocate_irqno); + +/* + * Allocate the 16 legacy interrupts for i8259 devices. This happens early + * in the kernel initialization so treating allocation failure as BUG() is + * ok. + */ +void __init alloc_legacy_irqno(void) +{ + int i; + + for (i = 0; i <= 16; i++) + BUG_ON(test_and_set_bit(i, irq_map)); +} + +void __devinit free_irqno(unsigned int irq) +{ + smp_mb__before_clear_bit(); + clear_bit(irq, irq_map); + smp_mb__after_clear_bit(); +} + +EXPORT_SYMBOL_GPL(free_irqno); + /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves. diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index 53f4171fc18..7a3ebbeba1f 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -1055,7 +1055,9 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name) asmlinkage int sys32_personality(unsigned long personality) { int ret; - if (current->personality == PER_LINUX32 && personality == PER_LINUX) + personality &= 0xffffffff; + if (personality(current->personality) == PER_LINUX32 && + personality == PER_LINUX) personality = PER_LINUX32; ret = sys_personality(personality); if (ret == PER_LINUX32) diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c index 9f307eb1a31..ec8209f3a0c 100644 --- a/arch/mips/kernel/process.c +++ b/arch/mips/kernel/process.c @@ -358,10 +358,8 @@ static int __init frame_info_init(void) unsigned long size = 0; #ifdef CONFIG_KALLSYMS unsigned long ofs; - char *modname; - char namebuf[KSYM_NAME_LEN + 1]; - kallsyms_lookup((unsigned long)schedule, &size, &ofs, &modname, namebuf); + kallsyms_lookup_size_offset((unsigned long)schedule, &size, &ofs); #endif schedule_mfi.func = schedule; schedule_mfi.func_size = size; @@ -403,8 +401,6 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, { unsigned long stack_page; struct mips_frame_info info; - char *modname; - char namebuf[KSYM_NAME_LEN + 1]; unsigned long size, ofs; int leaf; extern void ret_from_irq(void); @@ -433,7 +429,7 @@ unsigned long unwind_stack(struct task_struct *task, unsigned long *sp, } return 0; } - if (!kallsyms_lookup(pc, &size, &ofs, &modname, namebuf)) + if (!kallsyms_lookup_size_offset(pc, &size, &ofs)) return 0; /* * Return ra if an exception occured at the first instruction diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index d5c8b82fed7..cc566cf1224 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -85,7 +85,12 @@ move $28, a2 cpu_restore_nonscratch a1 +#if (_THREAD_SIZE - 32) < 0x10000 PTR_ADDIU t0, $28, _THREAD_SIZE - 32 +#else + PTR_LI t0, _THREAD_SIZE - 32 + PTR_ADDU t0, $28 +#endif set_saved_sp t0, t1, t2 #ifdef CONFIG_MIPS_MT_SMTC /* Read-modify-writes of Status must be atomic on a VPE */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 61362e6fa9e..a95f37de080 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -652,7 +652,10 @@ einval: li v0, -EINVAL sys sys_vmsplice 4 sys sys_move_pages 6 sys sys_set_robust_list 2 - sys sys_get_robust_list 3 + sys sys_get_robust_list 3 /* 4310 */ + sys sys_ni_syscall 0 + sys sys_getcpu 3 + sys sys_epoll_pwait 6 .endm /* We pre-compute the number of _instruction_ bytes needed to diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 6c7b5ed0ea6..8fb0f60f657 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -468,3 +468,6 @@ sys_call_table: PTR sys_move_pages PTR sys_set_robust_list PTR sys_get_robust_list + PTR sys_ni_syscall /* 5270 */ + PTR sys_getcpu + PTR sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 6d9f18727ac..0da5ca2040f 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -280,7 +280,7 @@ EXPORT(sysn32_call_table) PTR sys_sync PTR sys_acct PTR sys32_settimeofday - PTR sys_mount /* 6160 */ + PTR compat_sys_mount /* 6160 */ PTR sys_umount PTR sys_swapon PTR sys_swapoff @@ -394,3 +394,6 @@ EXPORT(sysn32_call_table) PTR sys_move_pages PTR compat_sys_set_robust_list PTR compat_sys_get_robust_list + PTR sys_ni_syscall + PTR sys_getcpu + PTR sys_epoll_pwait diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 2e6d0673163..b9d00cae8b5 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -226,7 +226,7 @@ sys_call_table: PTR sys_ni_syscall /* was sys_stat */ PTR sys_lseek PTR sys_getpid /* 4020 */ - PTR sys_mount + PTR compat_sys_mount PTR sys_oldumount PTR sys_setuid PTR sys_getuid @@ -516,4 +516,7 @@ sys_call_table: PTR compat_sys_move_pages PTR compat_sys_set_robust_list PTR compat_sys_get_robust_list /* 4310 */ + PTR sys_ni_syscall + PTR sys_getcpu + PTR sys_epoll_pwait .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index fdbb508661c..8f6e89697cc 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -223,7 +223,11 @@ disable: #else /* !CONFIG_BLK_DEV_INITRD */ -#define init_initrd() 0 +static unsigned long __init init_initrd(void) +{ + return 0; +} + #define finalize_initrd() do {} while (0) #endif diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index 3b5f3b63262..2ac19a6cbf6 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -140,15 +140,90 @@ static struct irqaction irq_call = { .name = "IPI_call" }; +static void __init smp_copy_vpe_config(void) +{ + write_vpe_c0_status( + (read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config( read_c0_config()); + + /* make sure there are no software interrupts pending */ + write_vpe_c0_cause(0); + + /* Propagate Config7 */ + write_vpe_c0_config7(read_c0_config7()); + + write_vpe_c0_count(read_c0_count()); +} + +static unsigned int __init smp_vpe_init(unsigned int tc, unsigned int mvpconf0, + unsigned int ncpu) +{ + if (tc > ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) + return ncpu; + + /* Deactivate all but VPE 0 */ + if (tc != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + + /* Record this as available CPU */ + cpu_set(tc, phys_cpu_present_map); + __cpu_number_map[tc] = ++ncpu; + __cpu_logical_map[ncpu] = tc; + } + + /* Disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (tc != 0) + smp_copy_vpe_config(); + + return ncpu; +} + +static void __init smp_tc_init(unsigned int tc, unsigned int mvpconf0) +{ + unsigned long tmp; + + if (!tc) + return; + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if (tc >= (((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1)) + write_tc_c0_tcbind(read_tc_c0_tcbind() | ((mvpconf0 & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); + else { + write_tc_c0_tcbind(read_tc_c0_tcbind() | tc); + + /* and set XTC */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (tc << VPECONF0_XTC_SHIFT)); + } + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); +} + /* * Common setup before any secondaries are started * Make sure all CPU's are in a sensible state before we boot any of the * secondarys */ -void plat_smp_setup(void) +void __init plat_smp_setup(void) { - unsigned long val; - int i, num; + unsigned int mvpconf0, ntc, tc, ncpu = 0; #ifdef CONFIG_MIPS_MT_FPAFF /* If we have an FPU, enroll ourselves in the FPU-full mask */ @@ -167,75 +242,16 @@ void plat_smp_setup(void) /* Put MVPE's into 'configuration state' */ set_c0_mvpcontrol(MVPCONTROL_VPC); - val = read_c0_mvpconf0(); + mvpconf0 = read_c0_mvpconf0(); + ntc = (mvpconf0 & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT; /* we'll always have more TC's than VPE's, so loop setting everything to a sensible state */ - for (i = 0, num = 0; i <= ((val & MVPCONF0_PTC) >> MVPCONF0_PTC_SHIFT); i++) { - settc(i); - - /* VPE's */ - if (i <= ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)) { - - /* deactivate all but vpe0 */ - if (i != 0) { - unsigned long tmp = read_vpe_c0_vpeconf0(); - - tmp &= ~VPECONF0_VPA; - - /* master VPE */ - tmp |= VPECONF0_MVP; - write_vpe_c0_vpeconf0(tmp); - - /* Record this as available CPU */ - cpu_set(i, phys_cpu_present_map); - __cpu_number_map[i] = ++num; - __cpu_logical_map[num] = i; - } - - /* disable multi-threading with TC's */ - write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); - - if (i != 0) { - write_vpe_c0_status((read_c0_status() & ~(ST0_IM | ST0_IE | ST0_KSU)) | ST0_CU0); + for (tc = 0; tc <= ntc; tc++) { + settc(tc); - /* set config to be the same as vpe0, particularly kseg0 coherency alg */ - write_vpe_c0_config( read_c0_config()); - - /* make sure there are no software interrupts pending */ - write_vpe_c0_cause(0); - - /* Propagate Config7 */ - write_vpe_c0_config7(read_c0_config7()); - } - - } - - /* TC's */ - - if (i != 0) { - unsigned long tmp; - - /* bind a TC to each VPE, May as well put all excess TC's - on the last VPE */ - if ( i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)+1) ) - write_tc_c0_tcbind(read_tc_c0_tcbind() | ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) ); - else { - write_tc_c0_tcbind( read_tc_c0_tcbind() | i); - - /* and set XTC */ - write_vpe_c0_vpeconf0( read_vpe_c0_vpeconf0() | (i << VPECONF0_XTC_SHIFT)); - } - - tmp = read_tc_c0_tcstatus(); - - /* mark not allocated and not dynamically allocatable */ - tmp &= ~(TCSTATUS_A | TCSTATUS_DA); - tmp |= TCSTATUS_IXMT; /* interrupt exempt */ - write_tc_c0_tcstatus(tmp); - - write_tc_c0_tchalt(TCHALT_H); - } + smp_tc_init(tc, mvpconf0); + ncpu = smp_vpe_init(tc, mvpconf0, ncpu); } /* Release config state */ @@ -243,7 +259,7 @@ void plat_smp_setup(void) /* We'll wait until starting the secondaries before starting MVPE */ - printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num); + printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu); } void __init plat_prepare_cpus(unsigned int max_cpus) diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 1af3612a1ce..db80957ada8 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -310,7 +310,7 @@ static void flush_tlb_all_ipi(void *info) void flush_tlb_all(void) { - on_each_cpu(flush_tlb_all_ipi, 0, 1, 1); + on_each_cpu(flush_tlb_all_ipi, NULL, 1, 1); } static void flush_tlb_mm_ipi(void *mm) diff --git a/arch/mips/kernel/smtc-asm.S b/arch/mips/kernel/smtc-asm.S index 1cb9441f147..921207c4a83 100644 --- a/arch/mips/kernel/smtc-asm.S +++ b/arch/mips/kernel/smtc-asm.S @@ -101,7 +101,9 @@ FEXPORT(__smtc_ipi_vector) lw t0,PT_PADSLOT5(sp) /* Argument from sender passed in stack pad slot 4 */ lw a0,PT_PADSLOT4(sp) - PTR_LA ra, _ret_from_irq + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) + PTR_LA ra, ret_from_irq jr t0 /* @@ -119,7 +121,10 @@ LEAF(self_ipi) subu t1,sp,PT_SIZE sw ra,PT_EPC(t1) sw a0,PT_PADSLOT4(t1) + LONG_L s0, TI_REGS($28) + LONG_S sp, TI_REGS($28) la t2,ipi_decode + LONG_S s0, TI_REGS($28) sw t2,PT_PADSLOT5(t1) /* Save pre-disable value of TCStatus */ sw t0,PT_TCSTATUS(t1) diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index cc1f7474f7d..3b78caf112f 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -476,6 +476,7 @@ void mipsmt_prepare_cpus(void) write_vpe_c0_compare(0); /* Propagate Config7 */ write_vpe_c0_config7(read_c0_config7()); + write_vpe_c0_count(read_c0_count()); } /* enable multi-threading within VPE */ write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() | VPECONTROL_TE); diff --git a/arch/mips/kernel/stacktrace.c b/arch/mips/kernel/stacktrace.c index 4aabe526a68..a586aba337a 100644 --- a/arch/mips/kernel/stacktrace.c +++ b/arch/mips/kernel/stacktrace.c @@ -57,7 +57,7 @@ static void save_context_stack(struct stack_trace *trace, pc = unwind_stack(task, &sp, pc, &ra); } while (pc); #else - save_raw_context_stack(sp); + save_raw_context_stack(trace, sp); #endif } diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index debe86c2f69..e535f86efa2 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -11,6 +11,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include <linux/clocksource.h> #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> @@ -67,15 +68,9 @@ int (*rtc_mips_set_time)(unsigned long) = null_rtc_set_time; int (*rtc_mips_set_mmss)(unsigned long); -/* usecs per counter cycle, shifted to left by 32 bits */ -static unsigned int sll32_usecs_per_cycle; - /* how many counter cycles in a jiffy */ static unsigned long cycles_per_jiffy __read_mostly; -/* Cycle counter value at the previous timer interrupt.. */ -static unsigned int timerhi, timerlo; - /* expirelo is the count value for next CPU timer interrupt */ static unsigned int expirelo; @@ -93,7 +88,7 @@ static unsigned int null_hpt_read(void) return 0; } -static void null_hpt_init(unsigned int count) +static void __init null_hpt_init(void) { /* nothing */ } @@ -128,186 +123,18 @@ static unsigned int c0_hpt_read(void) return read_c0_count(); } -/* For use solely as a high precision timer. */ -static void c0_hpt_init(unsigned int count) -{ - write_c0_count(read_c0_count() - count); -} - /* For use both as a high precision timer and an interrupt source. */ -static void c0_hpt_timer_init(unsigned int count) +static void __init c0_hpt_timer_init(void) { - count = read_c0_count() - count; - expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy; - write_c0_count(expirelo - cycles_per_jiffy); + expirelo = read_c0_count() + cycles_per_jiffy; write_c0_compare(expirelo); - write_c0_count(count); } int (*mips_timer_state)(void); void (*mips_timer_ack)(void); unsigned int (*mips_hpt_read)(void); -void (*mips_hpt_init)(unsigned int); - -/* - * Gettimeoffset routines. These routines returns the time duration - * since last timer interrupt in usecs. - * - * If the exact CPU counter frequency is known, use fixed_rate_gettimeoffset. - * Otherwise use calibrate_gettimeoffset() - * - * If the CPU does not have the counter register, you can either supply - * your own gettimeoffset() routine, or use null_gettimeoffset(), which - * gives the same resolution as HZ. - */ - -static unsigned long null_gettimeoffset(void) -{ - return 0; -} - - -/* The function pointer to one of the gettimeoffset funcs. */ -unsigned long (*do_gettimeoffset)(void) = null_gettimeoffset; - - -static unsigned long fixed_rate_gettimeoffset(void) -{ - u32 count; - unsigned long res; - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (sll32_usecs_per_cycle) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - - -/* - * Cached "1/(clocks per usec) * 2^32" value. - * It has to be recalculated once each jiffy. - */ -static unsigned long cached_quotient; - -/* Last jiffy when calibrate_divXX_gettimeoffset() was called. */ -static unsigned long last_jiffies; - -/* - * This is moved from dec/time.c:do_ioasic_gettimeoffset() by Maciej. - */ -static unsigned long calibrate_div32_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long quotient; - - tmp = jiffies; - - quotient = cached_quotient; - - if (last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies != 0) { - unsigned long r0; - do_div64_32(r0, timerhi, timerlo, tmp); - do_div64_32(quotient, USECS_PER_JIFFY, - USECS_PER_JIFFY_FRAC, r0); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - -static unsigned long calibrate_div64_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long quotient; - - tmp = jiffies; - - quotient = cached_quotient; - - if (last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies) { - unsigned long r0; - __asm__(".set push\n\t" - ".set mips3\n\t" - "lwu %0,%3\n\t" - "dsll32 %1,%2,0\n\t" - "or %1,%1,%0\n\t" - "ddivu $0,%1,%4\n\t" - "mflo %1\n\t" - "dsll32 %0,%5,0\n\t" - "or %0,%0,%6\n\t" - "ddivu $0,%0,%1\n\t" - "mflo %0\n\t" - ".set pop" - : "=&r" (quotient), "=&r" (r0) - : "r" (timerhi), "m" (timerlo), - "r" (tmp), "r" (USECS_PER_JIFFY), - "r" (USECS_PER_JIFFY_FRAC) - : "hi", "lo", GCC_REG_ACCUM); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - +void (*mips_hpt_init)(void) __initdata = null_hpt_init; +unsigned int mips_hpt_mask = 0xffffffff; /* last time when xtime and rtc are sync'ed up */ static long last_rtc_update; @@ -334,18 +161,10 @@ void local_timer_interrupt(int irq, void *dev_id) */ irqreturn_t timer_interrupt(int irq, void *dev_id) { - unsigned long j; - unsigned int count; - write_seqlock(&xtime_lock); - count = mips_hpt_read(); mips_timer_ack(); - /* Update timerhi/timerlo for intra-jiffy calibration. */ - timerhi += count < timerlo; /* Wrap around */ - timerlo = count; - /* * call the generic timer interrupt handling */ @@ -368,47 +187,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) } } - /* - * If jiffies has overflown in this timer_interrupt, we must - * update the timer[hi]/[lo] to make fast gettimeoffset funcs - * quotient calc still valid. -arca - * - * The first timer interrupt comes late as interrupts are - * enabled long after timers are initialized. Therefore the - * high precision timer is fast, leading to wrong gettimeoffset() - * calculations. We deal with it by setting it based on the - * number of its ticks between the second and the third interrupt. - * That is still somewhat imprecise, but it's a good estimate. - * --macro - */ - j = jiffies; - if (j < 4) { - static unsigned int prev_count; - static int hpt_initialized; - - switch (j) { - case 0: - timerhi = timerlo = 0; - mips_hpt_init(count); - break; - case 2: - prev_count = count; - break; - case 3: - if (!hpt_initialized) { - unsigned int c3 = 3 * (count - prev_count); - - timerhi = 0; - timerlo = c3; - mips_hpt_init(count - c3); - hpt_initialized = 1; - } - break; - default: - break; - } - } - write_sequnlock(&xtime_lock); /* @@ -476,12 +254,11 @@ asmlinkage void ll_local_timer_interrupt(int irq) * 1) board_time_init() - * a) (optional) set up RTC routines, * b) (optional) calibrate and set the mips_hpt_frequency - * (only needed if you intended to use fixed_rate_gettimeoffset - * or use cpu counter as timer interrupt source) + * (only needed if you intended to use cpu counter as timer interrupt + * source) * 2) setup xtime based on rtc_mips_get_time(). - * 3) choose a appropriate gettimeoffset routine. - * 4) calculate a couple of cached variables for later usage - * 5) plat_timer_setup() - + * 3) calculate a couple of cached variables for later usage + * 4) plat_timer_setup() - * a) (optional) over-write any choices made above by time_init(). * b) machine specific code should setup the timer irqaction. * c) enable the timer interrupt @@ -533,13 +310,48 @@ static unsigned int __init calibrate_hpt(void) } while (--i); hpt_end = mips_hpt_read(); - hpt_count = hpt_end - hpt_start; + hpt_count = (hpt_end - hpt_start) & mips_hpt_mask; hz = HZ; frequency = (u64)hpt_count * (u64)hz; return frequency >> log_2_loops; } +static cycle_t read_mips_hpt(void) +{ + return (cycle_t)mips_hpt_read(); +} + +static struct clocksource clocksource_mips = { + .name = "MIPS", + .read = read_mips_hpt, + .is_continuous = 1, +}; + +static void __init init_mips_clocksource(void) +{ + u64 temp; + u32 shift; + + if (!mips_hpt_frequency || mips_hpt_read == null_hpt_read) + return; + + /* Calclate a somewhat reasonable rating value */ + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, mips_hpt_frequency); + if ((temp >> 32) == 0) + break; + } + clocksource_mips.shift = shift; + clocksource_mips.mult = (u32)temp; + clocksource_mips.mask = mips_hpt_mask; + + clocksource_register(&clocksource_mips); +} + void __init time_init(void) { if (board_time_init) @@ -555,41 +367,21 @@ void __init time_init(void) -xtime.tv_sec, -xtime.tv_nsec); /* Choose appropriate high precision timer routines. */ - if (!cpu_has_counter && !mips_hpt_read) { + if (!cpu_has_counter && !mips_hpt_read) /* No high precision timer -- sorry. */ mips_hpt_read = null_hpt_read; - mips_hpt_init = null_hpt_init; - } else if (!mips_hpt_frequency && !mips_timer_state) { + else if (!mips_hpt_frequency && !mips_timer_state) { /* A high precision timer of unknown frequency. */ - if (!mips_hpt_read) { + if (!mips_hpt_read) /* No external high precision timer -- use R4k. */ mips_hpt_read = c0_hpt_read; - mips_hpt_init = c0_hpt_init; - } - - if (cpu_has_mips32r1 || cpu_has_mips32r2 || - (current_cpu_data.isa_level == MIPS_CPU_ISA_I) || - (current_cpu_data.isa_level == MIPS_CPU_ISA_II)) - /* - * We need to calibrate the counter but we don't have - * 64-bit division. - */ - do_gettimeoffset = calibrate_div32_gettimeoffset; - else - /* - * We need to calibrate the counter but we *do* have - * 64-bit division. - */ - do_gettimeoffset = calibrate_div64_gettimeoffset; } else { /* We know counter frequency. Or we can get it. */ if (!mips_hpt_read) { /* No external high precision timer -- use R4k. */ mips_hpt_read = c0_hpt_read; - if (mips_timer_state) - mips_hpt_init = c0_hpt_init; - else { + if (!mips_timer_state) { /* No external timer interrupt -- use R4k. */ mips_hpt_init = c0_hpt_timer_init; mips_timer_ack = c0_timer_ack; @@ -598,16 +390,9 @@ void __init time_init(void) if (!mips_hpt_frequency) mips_hpt_frequency = calibrate_hpt(); - do_gettimeoffset = fixed_rate_gettimeoffset; - /* Calculate cache parameters. */ cycles_per_jiffy = (mips_hpt_frequency + HZ / 2) / HZ; - /* sll32_usecs_per_cycle = 10^6 * 2^32 / mips_counter_freq */ - do_div64_32(sll32_usecs_per_cycle, - 1000000, mips_hpt_frequency / 2, - mips_hpt_frequency); - /* Report the high precision timer rate for a reference. */ printk("Using %u.%03u MHz high precision timer.\n", ((mips_hpt_frequency + 500) / 1000) / 1000, @@ -619,7 +404,7 @@ void __init time_init(void) mips_timer_ack = null_timer_ack; /* This sets up the high precision timer for the first interrupt. */ - mips_hpt_init(mips_hpt_read()); + mips_hpt_init(); /* * Call board specific timer interrupt setup. @@ -633,6 +418,8 @@ void __init time_init(void) * is not invoked accidentally. */ plat_timer_setup(&timer_irqaction); + + init_mips_clocksource(); } #define FEBRUARY 2 diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cce8313ec27..9fda1b8be3a 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -1111,7 +1111,7 @@ static struct shadow_registers { static void mips_srs_init(void) { shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; - printk(KERN_INFO "%d MIPSR2 register sets available\n", + printk(KERN_INFO "%ld MIPSR2 register sets available\n", shadow_registers.sr_supported); shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 0bb9cd88945..79f0317d84a 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -50,6 +50,16 @@ SECTIONS /* writeable */ .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ + /* + * This ALIGN is needed as a workaround for a bug a gcc bug upto 4.1 which + * limits the maximum alignment to at most 32kB and results in the following + * warning: + * + * CC arch/mips/kernel/init_task.o + * arch/mips/kernel/init_task.c:30: warning: alignment of ‘init_thread_union’ + * is greater than maximum object file alignment. Using 32768 + */ + . = ALIGN(_PAGE_SIZE); *(.data.init_task) *(.data) @@ -91,13 +101,7 @@ SECTIONS __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; diff --git a/arch/mips/lib-64/dump_tlb.c b/arch/mips/lib-64/dump_tlb.c index be8261be679..594df1a05ec 100644 --- a/arch/mips/lib-64/dump_tlb.c +++ b/arch/mips/lib-64/dump_tlb.c @@ -149,7 +149,7 @@ void dump_list_process(struct task_struct *t, void *address) printk("Addr == %08lx\n", addr); printk("tasks->mm.pgd == %08lx\n", (unsigned long) t->mm->pgd); - page_dir = pgd_offset(t->mm, 0); + page_dir = pgd_offset(t->mm, 0UL); printk("page_dir == %016lx\n", (unsigned long) page_dir); pgd = pgd_offset(t->mm, addr); @@ -184,13 +184,13 @@ void dump_list_current(void *address) dump_list_process(current, address); } -unsigned int vtop(void *address) +unsigned long vtop(void *address) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; pte_t *pte; - unsigned int addr, paddr; + unsigned long addr, paddr; addr = (unsigned long) address; pgd = pgd_offset(current->mm, addr); diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index be80c5dd4a0..eeed944e0f8 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -176,7 +176,7 @@ unsigned long __init prom_free_prom_memory(void) if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA) continue; - addr = boot_mem_map.map[i].addr; + addr = PAGE_ALIGN(boot_mem_map.map[i].addr); while (addr < boot_mem_map.map[i].addr + boot_mem_map.map[i].size) { ClearPageReserved(virt_to_page(__va(addr))); diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 9337f6c8873..3192a14698c 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -90,7 +90,7 @@ static struct pci_controller msc_controller = { void __init mips_pcibios_init(void) { struct pci_controller *controller; - unsigned long start, end, map, start1, end1, map1, map2, map3, mask; + resource_size_t start, end, map, start1, end1, map1, map2, map3, mask; switch (mips_revision_corid) { case MIPS_REVISION_CORID_QED_RM5261: diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 6f8a9fe7c1e..d817c60c5ca 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -187,7 +187,7 @@ out: } /* - * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect + * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect */ static unsigned int __init estimate_cpu_frequency(void) { @@ -208,7 +208,8 @@ static unsigned int __init estimate_cpu_frequency(void) count = 6000000; #endif #if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) - unsigned int flags; + unsigned long flags; + unsigned int start; local_irq_save(flags); @@ -217,13 +218,13 @@ static unsigned int __init estimate_cpu_frequency(void) while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); /* Start r4k counter. */ - write_c0_count(0); + start = read_c0_count(); /* Read counter exactly on falling edge of update flag */ while (CMOS_READ(RTC_REG_A) & RTC_UIP); while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); - count = read_c0_count(); + count = read_c0_count() - start; /* restore interrupts */ local_irq_restore(flags); diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 6244d0e2c7d..90ad5bf3e2f 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -32,6 +32,7 @@ #include <asm/i8259.h> #include <asm/irq_cpu.h> #include <asm/io.h> +#include <asm/irq_regs.h> #include <asm/mips-boards/malta.h> #include <asm/mips-boards/maltaint.h> #include <asm/mips-boards/piix4.h> @@ -131,7 +132,7 @@ static void corehi_irqdispatch(void) unsigned int intedge, intsteer, pcicmd, pcibadaddr; unsigned int pcimstat, intisr, inten, intpol; unsigned int intrcause,datalo,datahi; - struct pt_regs *regs; + struct pt_regs *regs = get_irq_regs(); printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n"); printk("epc : %08lx\nStatus: %08lx\n" diff --git a/arch/mips/mips-boards/sim/sim_time.c b/arch/mips/mips-boards/sim/sim_time.c index c566b9bd042..24a4ed00cc0 100644 --- a/arch/mips/mips-boards/sim/sim_time.c +++ b/arch/mips/mips-boards/sim/sim_time.c @@ -102,7 +102,7 @@ irqreturn_t sim_timer_interrupt(int irq, void *dev_id) /* - * Estimate CPU frequency. Sets mips_counter_frequency as a side-effect + * Estimate CPU frequency. Sets mips_hpt_frequency as a side-effect */ static unsigned int __init estimate_cpu_frequency(void) { diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index 5537558f19f..d0ddb4a768a 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -49,6 +49,15 @@ static unsigned short dcache_sets; static unsigned int icache_range_cutoff; static unsigned int dcache_range_cutoff; +static inline void sb1_on_each_cpu(void (*func) (void *info), void *info, + int retry, int wait) +{ + preempt_disable(); + smp_call_function(func, info, retry, wait); + func(info); + preempt_enable(); +} + /* * The dcache is fully coherent to the system, with one * big caveat: the instruction stream. In other words, @@ -226,7 +235,7 @@ static void sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, args.vma = vma; args.addr = addr; args.pfn = pfn; - on_each_cpu(sb1_flush_cache_page_ipi, (void *) &args, 1, 1); + sb1_on_each_cpu(sb1_flush_cache_page_ipi, (void *) &args, 1, 1); } #else void sb1_flush_cache_page(struct vm_area_struct *vma, unsigned long addr, unsigned long pfn) @@ -249,7 +258,7 @@ void sb1___flush_cache_all_ipi(void *ignored) static void sb1___flush_cache_all(void) { - on_each_cpu(sb1___flush_cache_all_ipi, 0, 1, 1); + sb1_on_each_cpu(sb1___flush_cache_all_ipi, 0, 1, 1); } #else void sb1___flush_cache_all(void) @@ -299,7 +308,7 @@ void sb1_flush_icache_range(unsigned long start, unsigned long end) args.start = start; args.end = end; - on_each_cpu(sb1_flush_icache_range_ipi, &args, 1, 1); + sb1_on_each_cpu(sb1_flush_icache_range_ipi, &args, 1, 1); } #else void sb1_flush_icache_range(unsigned long start, unsigned long end) @@ -326,7 +335,7 @@ static void sb1_flush_cache_sigtramp_ipi(void *info) static void sb1_flush_cache_sigtramp(unsigned long addr) { - on_each_cpu(sb1_flush_cache_sigtramp_ipi, (void *) addr, 1, 1); + sb1_on_each_cpu(sb1_flush_cache_sigtramp_ipi, (void *) addr, 1, 1); } #else void sb1_flush_cache_sigtramp(unsigned long addr) @@ -444,7 +453,6 @@ static __init void probe_cache_sizes(void) void sb1_cache_init(void) { extern char except_vec2_sb1; - extern char handle_vec2_sb1; /* Special cache error handler for SB1 */ set_uncached_handler (0x100, &except_vec2_sb1, 0x80); @@ -497,5 +505,5 @@ void sb1_cache_init(void) : : "memory"); - flush_cache_all(); + local_sb1___flush_cache_all(); } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index 88b72c9a849..2de4d3c367a 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -30,11 +30,34 @@ #include <asm/cachectl.h> #include <asm/cpu.h> #include <asm/dma.h> +#include <asm/kmap_types.h> #include <asm/mmu_context.h> #include <asm/sections.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> #include <asm/tlb.h> +#include <asm/fixmap.h> + +/* Atomicity and interruptability */ +#ifdef CONFIG_MIPS_MT_SMTC + +#include <asm/mipsmtregs.h> + +#define ENTER_CRITICAL(flags) \ + { \ + unsigned int mvpflags; \ + local_irq_save(flags);\ + mvpflags = dvpe() +#define EXIT_CRITICAL(flags) \ + evpe(mvpflags); \ + local_irq_restore(flags); \ + } +#else + +#define ENTER_CRITICAL(flags) local_irq_save(flags) +#define EXIT_CRITICAL(flags) local_irq_restore(flags) + +#endif /* CONFIG_MIPS_MT_SMTC */ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); @@ -80,13 +103,142 @@ unsigned long setup_zero_pages(void) return 1UL << order; } -#ifdef CONFIG_HIGHMEM -pte_t *kmap_pte; -pgprot_t kmap_prot; +/* + * These are almost like kmap_atomic / kunmap_atmic except they take an + * additional address argument as the hint. + */ #define kmap_get_fixmap_pte(vaddr) \ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr)) +#ifdef CONFIG_MIPS_MT_SMTC +static pte_t *kmap_coherent_pte; +static void __init kmap_coherent_init(void) +{ + unsigned long vaddr; + + /* cache the first coherent kmap pte */ + vaddr = __fix_to_virt(FIX_CMAP_BEGIN); + kmap_coherent_pte = kmap_get_fixmap_pte(vaddr); +} +#else +static inline void kmap_coherent_init(void) {} +#endif + +static inline void *kmap_coherent(struct page *page, unsigned long addr) +{ + enum fixed_addresses idx; + unsigned long vaddr, flags, entrylo; + unsigned long old_ctx; + pte_t pte; + int tlbidx; + + inc_preempt_count(); + idx = (addr >> PAGE_SHIFT) & (FIX_N_COLOURS - 1); +#ifdef CONFIG_MIPS_MT_SMTC + idx += FIX_N_COLOURS * smp_processor_id(); +#endif + vaddr = __fix_to_virt(FIX_CMAP_END - idx); + pte = mk_pte(page, PAGE_KERNEL); +#if defined(CONFIG_64BIT_PHYS_ADDR) && defined(CONFIG_CPU_MIPS32_R1) + entrylo = pte.pte_high; +#else + entrylo = pte_val(pte) >> 6; +#endif + + ENTER_CRITICAL(flags); + old_ctx = read_c0_entryhi(); + write_c0_entryhi(vaddr & (PAGE_MASK << 1)); + write_c0_entrylo0(entrylo); + write_c0_entrylo1(entrylo); +#ifdef CONFIG_MIPS_MT_SMTC + set_pte(kmap_coherent_pte - (FIX_CMAP_END - idx), pte); + /* preload TLB instead of local_flush_tlb_one() */ + mtc0_tlbw_hazard(); + tlb_probe(); + tlb_probe_hazard(); + tlbidx = read_c0_index(); + mtc0_tlbw_hazard(); + if (tlbidx < 0) + tlb_write_random(); + else + tlb_write_indexed(); +#else + tlbidx = read_c0_wired(); + write_c0_wired(tlbidx + 1); + write_c0_index(tlbidx); + mtc0_tlbw_hazard(); + tlb_write_indexed(); +#endif + tlbw_use_hazard(); + write_c0_entryhi(old_ctx); + EXIT_CRITICAL(flags); + + return (void*) vaddr; +} + +#define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) + +static inline void kunmap_coherent(struct page *page) +{ +#ifndef CONFIG_MIPS_MT_SMTC + unsigned int wired; + unsigned long flags, old_ctx; + + ENTER_CRITICAL(flags); + old_ctx = read_c0_entryhi(); + wired = read_c0_wired() - 1; + write_c0_wired(wired); + write_c0_index(wired); + write_c0_entryhi(UNIQUE_ENTRYHI(wired)); + write_c0_entrylo0(0); + write_c0_entrylo1(0); + mtc0_tlbw_hazard(); + tlb_write_indexed(); + tlbw_use_hazard(); + write_c0_entryhi(old_ctx); + EXIT_CRITICAL(flags); +#endif + dec_preempt_count(); + preempt_check_resched(); +} + +void copy_to_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + if (cpu_has_dc_aliases) { + void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(vto, src, len); + kunmap_coherent(page); + } else + memcpy(dst, src, len); + if ((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) + flush_cache_page(vma, vaddr, page_to_pfn(page)); +} + +EXPORT_SYMBOL(copy_to_user_page); + +void copy_from_user_page(struct vm_area_struct *vma, + struct page *page, unsigned long vaddr, void *dst, const void *src, + unsigned long len) +{ + if (cpu_has_dc_aliases) { + void *vfrom = + kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); + memcpy(dst, vfrom, len); + kunmap_coherent(page); + } else + memcpy(dst, src, len); +} + +EXPORT_SYMBOL(copy_from_user_page); + + +#ifdef CONFIG_HIGHMEM +pte_t *kmap_pte; +pgprot_t kmap_prot; + static void __init kmap_init(void) { unsigned long kmap_vstart; @@ -97,11 +249,12 @@ static void __init kmap_init(void) kmap_prot = PAGE_KERNEL; } +#endif /* CONFIG_HIGHMEM */ -#ifdef CONFIG_32BIT void __init fixrange_init(unsigned long start, unsigned long end, pgd_t *pgd_base) { +#if defined(CONFIG_HIGHMEM) || defined(CONFIG_MIPS_MT_SMTC) pgd_t *pgd; pud_t *pud; pmd_t *pmd; @@ -122,7 +275,7 @@ void __init fixrange_init(unsigned long start, unsigned long end, for (; (k < PTRS_PER_PMD) && (vaddr != end); pmd++, k++) { if (pmd_none(*pmd)) { pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); - set_pmd(pmd, __pmd(pte)); + set_pmd(pmd, __pmd((unsigned long)pte)); if (pte != pte_offset_kernel(pmd, 0)) BUG(); } @@ -132,9 +285,8 @@ void __init fixrange_init(unsigned long start, unsigned long end, } j = 0; } +#endif } -#endif /* CONFIG_32BIT */ -#endif /* CONFIG_HIGHMEM */ #ifndef CONFIG_NEED_MULTIPLE_NODES extern void pagetable_init(void); @@ -175,6 +327,7 @@ void __init paging_init(void) #ifdef CONFIG_HIGHMEM kmap_init(); #endif + kmap_coherent_init(); max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT; low = max_low_pfn; diff --git a/arch/mips/mm/ioremap.c b/arch/mips/mm/ioremap.c index 3101d1db559..cea7d0ea36e 100644 --- a/arch/mips/mm/ioremap.c +++ b/arch/mips/mm/ioremap.c @@ -176,7 +176,7 @@ void __iomem * __ioremap(phys_t phys_addr, phys_t size, unsigned long flags) #define IS_KSEG1(addr) (((unsigned long)(addr) & ~0x1fffffffUL) == CKSEG1) -void __iounmap(volatile void __iomem *addr) +void __iounmap(const volatile void __iomem *addr) { struct vm_struct *p; diff --git a/arch/mips/mm/pg-r4k.c b/arch/mips/mm/pg-r4k.c index b7c749232ff..d41fc5885e8 100644 --- a/arch/mips/mm/pg-r4k.c +++ b/arch/mips/mm/pg-r4k.c @@ -270,6 +270,20 @@ static inline void build_addiu_a2_a0(unsigned long offset) emit_instruction(mi); } +static inline void build_addiu_a2(unsigned long offset) +{ + union mips_instruction mi; + + BUG_ON(offset > 0x7fff); + + mi.i_format.opcode = cpu_has_64bit_gp_regs ? daddiu_op : addiu_op; + mi.i_format.rs = 6; /* $a2 */ + mi.i_format.rt = 6; /* $a2 */ + mi.i_format.simmediate = offset; + + emit_instruction(mi); +} + static inline void build_addiu_a1(unsigned long offset) { union mips_instruction mi; @@ -333,6 +347,7 @@ static inline void build_jr_ra(void) void __init build_clear_page(void) { unsigned int loop_start; + unsigned long off; epc = (unsigned int *) &clear_page_array; instruction_pending = 0; @@ -369,7 +384,12 @@ void __init build_clear_page(void) } } - build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0)); + off = PAGE_SIZE - (cpu_has_prefetch ? pref_offset_clear : 0); + if (off > 0x7fff) { + build_addiu_a2_a0(off >> 1); + build_addiu_a2(off >> 1); + } else + build_addiu_a2_a0(off); if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) build_insn_word(0x3c01a000); /* lui $at, 0xa000 */ @@ -420,12 +440,18 @@ dest = label(); void __init build_copy_page(void) { unsigned int loop_start; + unsigned long off; epc = (unsigned int *) ©_page_array; store_offset = load_offset = 0; instruction_pending = 0; - build_addiu_a2_a0(PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0)); + off = PAGE_SIZE - (cpu_has_prefetch ? pref_offset_copy : 0); + if (off > 0x7fff) { + build_addiu_a2_a0(off >> 1); + build_addiu_a2(off >> 1); + } else + build_addiu_a2_a0(off); if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) build_insn_word(0x3c01a000); /* lui $at, 0xa000 */ diff --git a/arch/mips/mm/pgtable-32.c b/arch/mips/mm/pgtable-32.c index 4bdaa05f485..4a61e624b0e 100644 --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -31,9 +31,10 @@ void pgd_init(unsigned long page) void __init pagetable_init(void) { -#ifdef CONFIG_HIGHMEM unsigned long vaddr; - pgd_t *pgd, *pgd_base; + pgd_t *pgd_base; +#ifdef CONFIG_HIGHMEM + pgd_t *pgd; pud_t *pud; pmd_t *pmd; pte_t *pte; @@ -44,7 +45,6 @@ void __init pagetable_init(void) pgd_init((unsigned long)swapper_pg_dir + sizeof(pgd_t) * USER_PTRS_PER_PGD); -#ifdef CONFIG_HIGHMEM pgd_base = swapper_pg_dir; /* @@ -53,6 +53,7 @@ void __init pagetable_init(void) vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; fixrange_init(vaddr, 0, pgd_base); +#ifdef CONFIG_HIGHMEM /* * Permanent kmaps: */ diff --git a/arch/mips/mm/pgtable-64.c b/arch/mips/mm/pgtable-64.c index 44b5e97fff6..8d600d307d5 100644 --- a/arch/mips/mm/pgtable-64.c +++ b/arch/mips/mm/pgtable-64.c @@ -8,6 +8,7 @@ */ #include <linux/init.h> #include <linux/mm.h> +#include <asm/fixmap.h> #include <asm/pgtable.h> void pgd_init(unsigned long page) @@ -52,7 +53,17 @@ void pmd_init(unsigned long addr, unsigned long pagetable) void __init pagetable_init(void) { + unsigned long vaddr; + pgd_t *pgd_base; + /* Initialize the entire pgd. */ pgd_init((unsigned long)swapper_pg_dir); pmd_init((unsigned long)invalid_pmd_table, (unsigned long)invalid_pte_table); + + pgd_base = swapper_pg_dir; + /* + * Fixed mappings: + */ + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; + fixrange_init(vaddr, 0, pgd_base); } diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 6f8b25cfa6f..fec318a1c8c 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -102,7 +102,7 @@ enum opcode { insn_addu, insn_addiu, insn_and, insn_andi, insn_beq, insn_beql, insn_bgez, insn_bgezl, insn_bltz, insn_bltzl, insn_bne, insn_daddu, insn_daddiu, insn_dmfc0, insn_dmtc0, - insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, + insn_dsll, insn_dsll32, insn_dsra, insn_dsrl, insn_dsrl32, insn_dsubu, insn_eret, insn_j, insn_jal, insn_jr, insn_ld, insn_ll, insn_lld, insn_lui, insn_lw, insn_mfc0, insn_mtc0, insn_ori, insn_rfe, insn_sc, insn_scd, insn_sd, insn_sll, @@ -145,6 +145,7 @@ static __initdata struct insn insn_table[] = { { insn_dsll32, M(spec_op,0,0,0,0,dsll32_op), RT | RD | RE }, { insn_dsra, M(spec_op,0,0,0,0,dsra_op), RT | RD | RE }, { insn_dsrl, M(spec_op,0,0,0,0,dsrl_op), RT | RD | RE }, + { insn_dsrl32, M(spec_op,0,0,0,0,dsrl32_op), RT | RD | RE }, { insn_dsubu, M(spec_op,0,0,0,0,dsubu_op), RS | RT | RD }, { insn_eret, M(cop0_op,cop_op,0,0,0,eret_op), 0 }, { insn_j, M(j_op,0,0,0,0,0), JIMM }, @@ -385,6 +386,7 @@ I_u2u1u3(_dsll); I_u2u1u3(_dsll32); I_u2u1u3(_dsra); I_u2u1u3(_dsrl); +I_u2u1u3(_dsrl32); I_u3u1u2(_dsubu); I_0(_eret); I_u1(_j); @@ -996,7 +998,12 @@ build_get_pmde64(u32 **p, struct label **l, struct reloc **r, #endif l_vmalloc_done(l, *p); - i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3); /* get pgd offset in bytes */ + + if (PGDIR_SHIFT - 3 < 32) /* get pgd offset in bytes */ + i_dsrl(p, tmp, tmp, PGDIR_SHIFT-3); + else + i_dsrl32(p, tmp, tmp, PGDIR_SHIFT - 3 - 32); + i_andi(p, tmp, tmp, (PTRS_PER_PGD - 1)<<3); i_daddu(p, ptr, ptr, tmp); /* add in pgd offset */ i_dmfc0(p, tmp, C0_BADVADDR); /* get faulting address */ @@ -1073,7 +1080,7 @@ build_get_pgde32(u32 **p, unsigned int tmp, unsigned int ptr) static __init void build_adjust_context(u32 **p, unsigned int ctx) { - unsigned int shift = 4 - (PTE_T_LOG2 + 1); + unsigned int shift = 4 - (PTE_T_LOG2 + 1) + PAGE_SHIFT - 12; unsigned int mask = (PTRS_PER_PTE / 2 - 1) << (PTE_T_LOG2 + 1); switch (current_cpu_data.cputype) { diff --git a/arch/mips/momentum/ocelot_3/Makefile b/arch/mips/momentum/ocelot_3/Makefile index 8bcea64dd27..d5a090a85a1 100644 --- a/arch/mips/momentum/ocelot_3/Makefile +++ b/arch/mips/momentum/ocelot_3/Makefile @@ -5,4 +5,4 @@ # removes any old dependencies. DON'T put your own dependencies here # unless it's something special (ie not a .c file). # -obj-y += irq.o prom.o reset.o setup.o +obj-y += irq.o platform.o prom.o reset.o setup.o diff --git a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h index 227e429fe72..5710a9029f1 100644 --- a/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h +++ b/arch/mips/momentum/ocelot_3/ocelot_3_fpga.h @@ -51,7 +51,9 @@ extern unsigned long ocelot_fpga_base; -#define OCELOT_FPGA_WRITE(x, y) writeb(x, ocelot_fpga_base + OCELOT_3_REG_##y) -#define OCELOT_FPGA_READ(x) readb(ocelot_fpga_base + OCELOT_3_REG_##x) +#define __FPGA_REG_TO_ADDR(reg) \ + ((void *) ocelot_fpga_base + OCELOT_3_REG_##reg) +#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) +#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) #endif diff --git a/arch/mips/momentum/ocelot_3/platform.c b/arch/mips/momentum/ocelot_3/platform.c new file mode 100644 index 00000000000..eefe5841fbb --- /dev/null +++ b/arch/mips/momentum/ocelot_3/platform.c @@ -0,0 +1,235 @@ +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <linux/ioport.h> +#include <linux/mv643xx.h> +#include <linux/platform_device.h> + +#include "ocelot_3_fpga.h" + +#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +#define MV_SRAM_BASE 0xfe000000UL +#define MV_SRAM_SIZE (256 * 1024) + +#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) +#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) + +#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE +#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) + +#define MV64x60_IRQ_ETH_0 48 +#define MV64x60_IRQ_ETH_1 49 +#define MV64x60_IRQ_ETH_2 50 + +#ifdef CONFIG_MV643XX_ETH_0 + +static struct resource mv64x60_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = MV64x60_IRQ_ETH_0, + .end = MV64x60_IRQ_ETH_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth0_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth0_pd = { + .mac_addr = eth0_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH0, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), + .resource = mv64x60_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_0 */ + +#ifdef CONFIG_MV643XX_ETH_1 + +static struct resource mv64x60_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = MV64x60_IRQ_ETH_1, + .end = MV64x60_IRQ_ETH_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth1_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth1_pd = { + .mac_addr = eth1_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH1, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), + .resource = mv64x60_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_1 */ + +#ifdef CONFIG_MV643XX_ETH_2 + +static struct resource mv64x60_eth2_resources[] = { + [0] = { + .name = "eth2 irq", + .start = MV64x60_IRQ_ETH_2, + .end = MV64x60_IRQ_ETH_2, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth2_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth2_pd = { + .mac_addr = eth2_mac_addr, +}; + +static struct platform_device eth2_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth2_resources), + .resource = mv64x60_eth2_resources, + .dev = { + .platform_data = ð2_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_2 */ + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, +#ifdef CONFIG_MV643XX_ETH_0 + ð0_device, +#endif +#ifdef CONFIG_MV643XX_ETH_1 + ð1_device, +#endif +#ifdef CONFIG_MV643XX_ETH_2 + ð2_device, +#endif +}; + +static u8 __init exchange_bit(u8 val, u8 cs) +{ + /* place the data */ + OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); + udelay(1); + + /* turn the clock on */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); + udelay(1); + + /* turn the clock off and read-strobe */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); + + /* return the data */ + return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; +} + +static void __init get_mac(char dest[6]) +{ + u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + int i,j; + + for (i = 0; i < 12; i++) + exchange_bit(read_opcode[i], 1); + + for (j = 0; j < 6; j++) { + dest[j] = 0; + for (i = 0; i < 8; i++) { + dest[j] <<= 1; + dest[j] |= exchange_bit(0, 1); + } + } + + /* turn off CS */ + exchange_bit(0,0); +} + +/* + * Copy and increment ethernet MAC address by a small value. + * + * This is useful for systems where the only one MAC address is stored in + * non-volatile memory for multiple ports. + */ +static inline void eth_mac_add(unsigned char *dst, unsigned char *src, + unsigned int add) +{ + int i; + + BUG_ON(add >= 256); + + for (i = ETH_ALEN; i >= 0; i--) { + dst[i] = src[i] + add; + add = dst[i] < src[i]; /* compute carry */ + } + + WARN_ON(add); +} + +static int __init mv643xx_eth_add_pds(void) +{ + unsigned char mac[ETH_ALEN]; + int ret; + + get_mac(mac); +#ifdef CONFIG_MV643XX_ETH_0 + eth_mac_add(eth1_mac_addr, mac, 0); +#endif +#ifdef CONFIG_MV643XX_ETH_1 + eth_mac_add(eth1_mac_addr, mac, 1); +#endif +#ifdef CONFIG_MV643XX_ETH_2 + eth_mac_add(eth2_mac_addr, mac, 2); +#endif + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); + +#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_3/prom.c b/arch/mips/momentum/ocelot_3/prom.c index 296d945bc24..6ce9b7fdb82 100644 --- a/arch/mips/momentum/ocelot_3/prom.c +++ b/arch/mips/momentum/ocelot_3/prom.c @@ -34,64 +34,11 @@ struct callvectors* debug_vectors; extern unsigned long marvell_base; extern unsigned long cpu_clock; -#ifdef CONFIG_MV643XX_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif - const char *get_system_type(void) { return "Momentum Ocelot-3"; } -#ifdef CONFIG_MV643XX_ETH -void burn_clocks(void) -{ - int i; - - /* this loop should burn at least 1us -- this should be plenty */ - for (i = 0; i < 0x10000; i++) - ; -} - -u8 exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - burn_clocks(); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - burn_clocks(); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); -} - -void get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} -#endif - - #ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) @@ -228,11 +175,6 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_3; -#ifdef CONFIG_MV643XX_ETH - /* get the base MAC address for on-board ethernet ports */ - get_mac(prom_mac_addr_base); -#endif - #ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif diff --git a/arch/mips/momentum/ocelot_3/setup.c b/arch/mips/momentum/ocelot_3/setup.c index 7d74f8c5412..ff0829f8111 100644 --- a/arch/mips/momentum/ocelot_3/setup.c +++ b/arch/mips/momentum/ocelot_3/setup.c @@ -4,7 +4,7 @@ * BRIEF MODULE DESCRIPTION * Momentum Computer Ocelot-3 board dependent boot routines * - * Copyright (C) 1996, 1997, 01, 05 Ralf Baechle + * Copyright (C) 1996, 1997, 01, 05 - 06 Ralf Baechle * Copyright (C) 2000 RidgeRun, Inc. * Copyright (C) 2001 Red Hat, Inc. * Copyright (C) 2002 Momentum Computer diff --git a/arch/mips/momentum/ocelot_c/Makefile b/arch/mips/momentum/ocelot_c/Makefile index 94802b4db47..d69161aa167 100644 --- a/arch/mips/momentum/ocelot_c/Makefile +++ b/arch/mips/momentum/ocelot_c/Makefile @@ -2,7 +2,7 @@ # Makefile for Momentum Computer's Ocelot-C and -CS boards. # -obj-y += cpci-irq.o irq.o prom.o reset.o \ +obj-y += cpci-irq.o irq.o platform.o prom.o reset.o \ setup.o uart-irq.o obj-$(CONFIG_KGDB) += dbg_io.o diff --git a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h index 7228cd19e5e..f0f5581dcb5 100644 --- a/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h +++ b/arch/mips/momentum/ocelot_c/ocelot_c_fpga.h @@ -53,7 +53,9 @@ #define OCELOT_C_REG_INTSET 0xe #define OCELOT_C_REG_INTCLR 0xf -#define OCELOT_FPGA_WRITE(x, y) writeb(x, OCELOT_C_CS0_ADDR + OCELOT_C_REG_##y) -#define OCELOT_FPGA_READ(x) readb(OCELOT_C_CS0_ADDR + OCELOT_C_REG_##x) +#define __FPGA_REG_TO_ADDR(reg) \ + ((void *) OCELOT_C_CS0_ADDR + OCELOT_C_REG_##reg) +#define OCELOT_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg)) +#define OCELOT_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg)) #endif diff --git a/arch/mips/momentum/ocelot_c/platform.c b/arch/mips/momentum/ocelot_c/platform.c new file mode 100644 index 00000000000..6c495b2f156 --- /dev/null +++ b/arch/mips/momentum/ocelot_c/platform.c @@ -0,0 +1,201 @@ +#include <linux/delay.h> +#include <linux/if_ether.h> +#include <linux/ioport.h> +#include <linux/mv643xx.h> +#include <linux/platform_device.h> + +#include "ocelot_c_fpga.h" + +#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) + +static struct resource mv643xx_eth_shared_resources[] = { + [0] = { + .name = "ethernet shared base", + .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS, + .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS + + MV643XX_ETH_SHARED_REGS_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device mv643xx_eth_shared_device = { + .name = MV643XX_ETH_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources), + .resource = mv643xx_eth_shared_resources, +}; + +#define MV_SRAM_BASE 0xfe000000UL +#define MV_SRAM_SIZE (256 * 1024) + +#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4) +#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4) + +#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE +#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2)) + +#define MV64x60_IRQ_ETH_0 48 +#define MV64x60_IRQ_ETH_1 49 + +#ifdef CONFIG_MV643XX_ETH_0 + +static struct resource mv64x60_eth0_resources[] = { + [0] = { + .name = "eth0 irq", + .start = MV64x60_IRQ_ETH_0, + .end = MV64x60_IRQ_ETH_0, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth0_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth0_pd = { + .mac_addr = eth0_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH0, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth0_device = { + .name = MV643XX_ETH_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(mv64x60_eth0_resources), + .resource = mv64x60_eth0_resources, + .dev = { + .platform_data = ð0_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_0 */ + +#ifdef CONFIG_MV643XX_ETH_1 + +static struct resource mv64x60_eth1_resources[] = { + [0] = { + .name = "eth1 irq", + .start = MV64x60_IRQ_ETH_1, + .end = MV64x60_IRQ_ETH_1, + .flags = IORESOURCE_IRQ, + }, +}; + +static char eth1_mac_addr[ETH_ALEN]; + +static struct mv643xx_eth_platform_data eth1_pd = { + .mac_addr = eth1_mac_addr, + + .tx_sram_addr = MV_SRAM_BASE_ETH1, + .tx_sram_size = MV_SRAM_TXRING_SIZE, + .tx_queue_size = MV_SRAM_TXRING_SIZE / 16, + + .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE, + .rx_sram_size = MV_SRAM_RXRING_SIZE, + .rx_queue_size = MV_SRAM_RXRING_SIZE / 16, +}; + +static struct platform_device eth1_device = { + .name = MV643XX_ETH_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(mv64x60_eth1_resources), + .resource = mv64x60_eth1_resources, + .dev = { + .platform_data = ð1_pd, + }, +}; +#endif /* CONFIG_MV643XX_ETH_1 */ + +static struct platform_device *mv643xx_eth_pd_devs[] __initdata = { + &mv643xx_eth_shared_device, +#ifdef CONFIG_MV643XX_ETH_0 + ð0_device, +#endif +#ifdef CONFIG_MV643XX_ETH_1 + ð1_device, +#endif + /* The third port is not wired up on the Ocelot C */ +}; + +static u8 __init exchange_bit(u8 val, u8 cs) +{ + /* place the data */ + OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); + udelay(1); + + /* turn the clock on */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); + udelay(1); + + /* turn the clock off and read-strobe */ + OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); + + /* return the data */ + return (OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1; +} + +static void __init get_mac(char dest[6]) +{ + u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; + int i,j; + + for (i = 0; i < 12; i++) + exchange_bit(read_opcode[i], 1); + + for (j = 0; j < 6; j++) { + dest[j] = 0; + for (i = 0; i < 8; i++) { + dest[j] <<= 1; + dest[j] |= exchange_bit(0, 1); + } + } + + /* turn off CS */ + exchange_bit(0,0); +} + +/* + * Copy and increment ethernet MAC address by a small value. + * + * This is useful for systems where the only one MAC address is stored in + * non-volatile memory for multiple ports. + */ +static inline void eth_mac_add(unsigned char *dst, unsigned char *src, + unsigned int add) +{ + int i; + + BUG_ON(add >= 256); + + for (i = ETH_ALEN; i >= 0; i--) { + dst[i] = src[i] + add; + add = dst[i] < src[i]; /* compute carry */ + } + + WARN_ON(add); +} + +static int __init mv643xx_eth_add_pds(void) +{ + unsigned char mac[ETH_ALEN]; + int ret; + + get_mac(mac); +#ifdef CONFIG_MV643XX_ETH_0 + eth_mac_add(eth1_mac_addr, mac, 0); +#endif +#ifdef CONFIG_MV643XX_ETH_1 + eth_mac_add(eth1_mac_addr, mac, 1); +#endif + ret = platform_add_devices(mv643xx_eth_pd_devs, + ARRAY_SIZE(mv643xx_eth_pd_devs)); + + return ret; +} + +device_initcall(mv643xx_eth_add_pds); + +#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */ diff --git a/arch/mips/momentum/ocelot_c/prom.c b/arch/mips/momentum/ocelot_c/prom.c index 4c50a147f42..d0b77e101d7 100644 --- a/arch/mips/momentum/ocelot_c/prom.c +++ b/arch/mips/momentum/ocelot_c/prom.c @@ -29,11 +29,7 @@ struct callvectors* debug_vectors; extern unsigned long marvell_base; -extern unsigned long cpu_clock; - -#ifdef CONFIG_MV643XX_ETH -extern unsigned char prom_mac_addr_base[6]; -#endif +extern unsigned int cpu_clock; const char *get_system_type(void) { @@ -44,55 +40,6 @@ const char *get_system_type(void) #endif } -#ifdef CONFIG_MV643XX_ETH -static void burn_clocks(void) -{ - int i; - - /* this loop should burn at least 1us -- this should be plenty */ - for (i = 0; i < 0x10000; i++) - ; -} - -static u8 exchange_bit(u8 val, u8 cs) -{ - /* place the data */ - OCELOT_FPGA_WRITE((val << 2) | cs, EEPROM_MODE); - burn_clocks(); - - /* turn the clock on */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE); - burn_clocks(); - - /* turn the clock off and read-strobe */ - OCELOT_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE); - - /* return the data */ - return ((OCELOT_FPGA_READ(EEPROM_MODE) >> 3) & 0x1); -} - -void get_mac(char dest[6]) -{ - u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}; - int i,j; - - for (i = 0; i < 12; i++) - exchange_bit(read_opcode[i], 1); - - for (j = 0; j < 6; j++) { - dest[j] = 0; - for (i = 0; i < 8; i++) { - dest[j] <<= 1; - dest[j] |= exchange_bit(0, 1); - } - } - - /* turn off CS */ - exchange_bit(0,0); -} -#endif - - #ifdef CONFIG_64BIT unsigned long signext(unsigned long addr) @@ -226,11 +173,6 @@ void __init prom_init(void) mips_machgroup = MACH_GROUP_MOMENCO; mips_machtype = MACH_MOMENCO_OCELOT_C; -#ifdef CONFIG_MV643XX_ETH - /* get the base MAC address for on-board ethernet ports */ - get_mac(prom_mac_addr_base); -#endif - #ifndef CONFIG_64BIT debug_vectors->printf("Booting Linux kernel...\n"); #endif diff --git a/arch/mips/momentum/ocelot_c/setup.c b/arch/mips/momentum/ocelot_c/setup.c index 9c0c462af65..0b6b2338cfb 100644 --- a/arch/mips/momentum/ocelot_c/setup.c +++ b/arch/mips/momentum/ocelot_c/setup.c @@ -69,8 +69,7 @@ #include "ocelot_c_fpga.h" unsigned long marvell_base; -extern unsigned long mv64340_sram_base; -unsigned long cpu_clock; +unsigned int cpu_clock; /* These functions are used for rebooting or halting the machine*/ extern void momenco_ocelot_restart(char *command); @@ -119,7 +118,6 @@ void PMON_v2_setup(void) add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfffffffffe000000, PM_16M); marvell_base = 0xfffffffff4000000; - mv64340_sram_base = 0xfffffffffe000000; #else /* marvell and extra space */ add_wired_entry(ENTRYLO(0xf4000000), ENTRYLO(0xf4010000), 0xf4000000, PM_64K); @@ -129,7 +127,6 @@ void PMON_v2_setup(void) add_wired_entry(ENTRYLO(0xfe000000), ENTRYLO(0xff000000), 0xfe000000, PM_16M); marvell_base = 0xf4000000; - mv64340_sram_base = 0xfe000000; #endif } @@ -346,22 +343,20 @@ void __init plat_mem_setup(void) } } -#ifndef CONFIG_64BIT -/* This needs to be one of the first initcalls, because no I/O port access - can work before this */ +/* + * This needs to be one of the first initcalls, because no I/O port access + * can work before this + */ static int io_base_ioremap(void) { - /* we're mapping PCI accesses from 0xc0000000 to 0xf0000000 */ - void *io_remap_range = ioremap(0xc0000000, 0x30000000); + void __iomem * io_remap_range = ioremap(0xc0000000UL, 0x10000); - if (!io_remap_range) { + if (!io_remap_range) panic("Could not ioremap I/O port range"); - } - printk("io_remap_range set at 0x%08x\n", (uint32_t)io_remap_range); - set_io_port_base(io_remap_range - 0xc0000000); + + set_io_port_base((unsigned long) io_remap_range); return 0; } module_init(io_base_ioremap); -#endif diff --git a/arch/mips/momentum/ocelot_g/gt-irq.c b/arch/mips/momentum/ocelot_g/gt-irq.c index 7b5cc6648f7..e5576bd50fa 100644 --- a/arch/mips/momentum/ocelot_g/gt-irq.c +++ b/arch/mips/momentum/ocelot_g/gt-irq.c @@ -27,7 +27,7 @@ unsigned long bus_clock; * be handled and ack'ed differently than other MIPS interrupts. */ -#if CURRENTLY_UNUSED +#if 0 struct tq_struct irq_handlers[MAX_CAUSE_REGS][MAX_CAUSE_REG_WIDTH]; void hook_irq_handler(int int_cause, int bit_num, void *isr_ptr); @@ -95,7 +95,7 @@ int disable_galileo_irq(int int_cause, int bit_num) return 0; return 1; } -#endif /* UNUSED */ +#endif /* 0 */ /* * Interrupt handler for interrupts coming from the Galileo chip via P0_INT#. @@ -196,7 +196,7 @@ void gt64240_time_init(void) void gt64240_irq_init(void) { -#if CURRENTLY_UNUSED +#if 0 int i, j; /* Reset irq handlers pointers to NULL */ @@ -208,5 +208,5 @@ void gt64240_irq_init(void) irq_handlers[i][j].data = NULL; } } -#endif +#endif /* 0 */ } diff --git a/arch/mips/momentum/ocelot_g/ocelot_pld.h b/arch/mips/momentum/ocelot_g/ocelot_pld.h index fcb8275e219..95e0534026d 100644 --- a/arch/mips/momentum/ocelot_g/ocelot_pld.h +++ b/arch/mips/momentum/ocelot_g/ocelot_pld.h @@ -23,8 +23,8 @@ #define OCELOT_REG_INTSET (12) #define OCELOT_REG_INTCLR (13) -#define OCELOT_PLD_WRITE(x, y) writeb(x, OCELOT_CS0_ADDR + OCELOT_REG_##y) -#define OCELOT_PLD_READ(x) readb(OCELOT_CS0_ADDR + OCELOT_REG_##x) - +#define __PLD_REG_TO_ADDR(reg) ((void *) OCELOT_CS0_ADDR + OCELOT_REG_##reg) +#define OCELOT_PLD_WRITE(x, reg) writeb(x, __PLD_REG_TO_ADDR(reg)) +#define OCELOT_PLD_READ(reg) readb(__PLD_REG_TO_ADDR(reg)) #endif /* __MOMENCO_OCELOT_PLD_H__ */ diff --git a/arch/mips/momentum/ocelot_g/setup.c b/arch/mips/momentum/ocelot_g/setup.c index 56ec47039c1..d288f7b0184 100644 --- a/arch/mips/momentum/ocelot_g/setup.c +++ b/arch/mips/momentum/ocelot_g/setup.c @@ -57,6 +57,7 @@ #include <asm/gt64240.h> #include <asm/irq.h> #include <asm/pci.h> +#include <asm/pgtable.h> #include <asm/processor.h> #include <asm/reboot.h> #include <linux/bootmem.h> @@ -160,6 +161,10 @@ static void __init setup_l3cache(unsigned long size) printk("Done\n"); } +void __init plat_timer_setup(struct irqaction *irq) +{ +} + void __init plat_mem_setup(void) { void (*l3func)(unsigned long) = (void *) KSEG1ADDR(setup_l3cache); diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h index 354e5449640..fa6b4aae752 100644 --- a/arch/mips/oprofile/op_impl.h +++ b/arch/mips/oprofile/op_impl.h @@ -10,8 +10,6 @@ #ifndef OP_IMPL_H #define OP_IMPL_H 1 -struct pt_regs; - extern int null_perf_irq(void); extern int (*perf_irq)(void); diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index dd0aec9c3ce..1fb240c57ba 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -31,16 +31,18 @@ #define M_COUNTER_OVERFLOW (1UL << 31) #ifdef CONFIG_MIPS_MT_SMP -#define WHAT (M_TC_EN_VPE | M_PERFCTL_VPEID(smp_processor_id())) +#define WHAT (M_TC_EN_VPE | M_PERFCTL_VPEID(smp_processor_id())) +#define vpe_id() smp_processor_id() #else -#define WHAT 0 +#define WHAT 0 +#define vpe_id() smp_processor_id() #endif #define __define_perf_accessors(r, n, np) \ \ static inline unsigned int r_c0_ ## r ## n(void) \ { \ - unsigned int cpu = smp_processor_id(); \ + unsigned int cpu = vpe_id(); \ \ switch (cpu) { \ case 0: \ @@ -55,7 +57,7 @@ static inline unsigned int r_c0_ ## r ## n(void) \ \ static inline void w_c0_ ## r ## n(unsigned int value) \ { \ - unsigned int cpu = smp_processor_id(); \ + unsigned int cpu = vpe_id(); \ \ switch (cpu) { \ case 0: \ @@ -218,7 +220,7 @@ static inline int n_counters(void) { int counters = __n_counters(); -#ifndef CONFIG_SMP +#ifdef CONFIG_MIPS_MT_SMP if (current_cpu_data.cputype == CPU_34K) return counters >> 1; #endif diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c index b7063fefa65..7dc9bf6f132 100644 --- a/arch/mips/oprofile/op_model_rm9000.c +++ b/arch/mips/oprofile/op_model_rm9000.c @@ -80,8 +80,7 @@ static void rm9000_cpu_stop(void *args) write_c0_perfcontrol(0); } -static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id, - struct pt_regs *regs) +static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id) { unsigned int control = read_c0_perfcontrol(); uint32_t counter1, counter2; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 3cf0dd4ba54..70cb55b89df 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -26,7 +26,7 @@ obj-$(CONFIG_DDB5477) += fixup-ddb5477.o pci-ddb5477.o ops-ddb5477.o obj-$(CONFIG_LASAT) += pci-lasat.o obj-$(CONFIG_MIPS_ATLAS) += fixup-atlas.o obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o -obj-$(CONFIG_MIPS_EV64120) += fixup-ev64120.o +obj-$(CONFIG_MIPS_EV64120) += pci-ev64120.o obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_AU1550) += fixup-au1000.o ops-au1000.o obj-$(CONFIG_SOC_PNX8550) += fixup-pnx8550.o ops-pnx8550.o diff --git a/arch/mips/pci/fixup-ev64120.c b/arch/mips/pci/fixup-ev64120.c deleted file mode 100644 index 8dbb90d63f0..00000000000 --- a/arch/mips/pci/fixup-ev64120.c +++ /dev/null @@ -1,34 +0,0 @@ -#include <linux/pci.h> -#include <linux/init.h> - -int pci_range_ck(unsigned char bus, unsigned char dev) -{ - if (((bus == 0) || (bus == 1)) && (dev >= 6) && (dev <= 8)) - return 0; - - return -1; -} - -/* - * After detecting all agents over the PCI , this function is called - * in order to give an interrupt number for each PCI device starting - * from IRQ 20. It does also enables master for each device. - */ -void __devinit pcibios_fixup_bus(struct pci_bus *bus) -{ - unsigned int irq = 20; - struct pci_bus *current_bus = bus; - struct pci_dev *dev; - struct list_head *devices_link; - - list_for_each(devices_link, &(current_bus->devices)) { - dev = pci_dev_b(devices_link); - if (dev != NULL) { - dev->irq = irq++; - - /* Assign an interrupt number for the device */ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); - pcibios_set_master(dev); - } - } -} diff --git a/arch/mips/pci/pci-ev64120.c b/arch/mips/pci/pci-ev64120.c new file mode 100644 index 00000000000..9cd859ef184 --- /dev/null +++ b/arch/mips/pci/pci-ev64120.c @@ -0,0 +1,21 @@ +#include <linux/pci.h> + +int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ + int irq; + + if (!pin) + return 0; + + irq = allocate_irqno(); + if (irq < 0) + return 0; + + return irq; +} + +/* Do platform specific device initialization at pci_enable_device() time */ +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c index 0af655b1f33..65c440e8480 100644 --- a/arch/mips/philips/pnx8550/common/time.c +++ b/arch/mips/philips/pnx8550/common/time.c @@ -41,8 +41,8 @@ extern unsigned int mips_hpt_frequency; * 1) board_time_init() - * a) (optional) set up RTC routines, * b) (optional) calibrate and set the mips_hpt_frequency - * (only needed if you intended to use fixed_rate_gettimeoffset - * or use cpu counter as timer interrupt source) + * (only needed if you intended to use cpu counter as timer interrupt + * source) */ void pnx8550_time_init(void) diff --git a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c index 416da22b3bf..85b14c73c22 100644 --- a/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c +++ b/arch/mips/pmc-sierra/yosemite/i2c-yosemite.c @@ -74,7 +74,7 @@ static int titan_i2c_poll(void) int titan_i2c_xfer(unsigned int slave_addr, titan_i2c_command * cmd, int size, unsigned int *addr) { - int loop = 0, bytes, i; + int loop, bytes = 0, i; unsigned int *write_data, data, *read_data; unsigned long reg_val, val; diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 65fa3a23ea5..3cc0436db6c 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -3,9 +3,7 @@ #include <asm/pmon.h> #include <asm/titan_dep.h> - -extern unsigned int (*mips_hpt_read)(void); -extern void (*mips_hpt_init)(unsigned int); +#include <asm/time.h> #define LAUNCHSTACK_SIZE 256 @@ -101,7 +99,7 @@ void prom_cpus_done(void) */ void prom_init_secondary(void) { - mips_hpt_init(mips_hpt_read()); + mips_hpt_init(); set_c0_status(ST0_CO | ST0_IE | ST0_IM); } diff --git a/arch/mips/sgi-ip27/ip27-irq.c b/arch/mips/sgi-ip27/ip27-irq.c index f01ba1f9077..270ecd3e6b4 100644 --- a/arch/mips/sgi-ip27/ip27-irq.c +++ b/arch/mips/sgi-ip27/ip27-irq.c @@ -354,29 +354,6 @@ static struct irq_chip bridge_irq_type = { .end = end_bridge_irq, }; -static unsigned long irq_map[NR_IRQS / BITS_PER_LONG]; - -int allocate_irqno(void) -{ - int irq; - -again: - irq = find_first_zero_bit(irq_map, NR_IRQS); - - if (irq >= NR_IRQS) - return -ENOSPC; - - if (test_and_set_bit(irq, irq_map)) - goto again; - - return irq; -} - -void free_irqno(unsigned int irq) -{ - clear_bit(irq, irq_map); -} - void __devinit register_bridge_irq(unsigned int irq) { irq_desc[irq].status = IRQ_DISABLED; diff --git a/arch/mips/sgi-ip27/ip27-klnuma.c b/arch/mips/sgi-ip27/ip27-klnuma.c index d777b7d1a9f..f9f404a8dda 100644 --- a/arch/mips/sgi-ip27/ip27-klnuma.c +++ b/arch/mips/sgi-ip27/ip27-klnuma.c @@ -26,7 +26,7 @@ static cpumask_t ktext_repmask; * kernel. For example, we should never put a copy on a headless node, * and we should respect the topology of the machine. */ -void __init setup_replication_mask() +void __init setup_replication_mask(void) { cnodeid_t cnode; diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 4e870fc4469..5e82a268e3c 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -134,13 +134,6 @@ again: irq_exit(); } -unsigned long ip27_do_gettimeoffset(void) -{ - unsigned long ct_cur1; - ct_cur1 = REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT) + CYCLES_PER_JIFFY; - return (ct_cur1 - ct_cur[0]) * NSEC_PER_CYCLE / 1000; -} - /* Includes for ioc3_init(). */ #include <asm/sn/types.h> #include <asm/sn/sn0/addrs.h> @@ -221,8 +214,6 @@ static struct irqaction rt_irqaction = { .name = "timer" }; -extern int allocate_irqno(void); - void __init plat_timer_setup(struct irqaction *irq) { int irqno = allocate_irqno(); @@ -248,12 +239,17 @@ void __init plat_timer_setup(struct irqaction *irq) setup_irq(irqno, &rt_irqaction); } +static unsigned int ip27_hpt_read(void) +{ + return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT); +} + void __init ip27_time_init(void) { + mips_hpt_read = ip27_hpt_read; + mips_hpt_frequency = CYCLES_PER_SEC; xtime.tv_sec = get_m48t35_time(); xtime.tv_nsec = 0; - - do_gettimeoffset = ip27_do_gettimeoffset; } void __init cpu_time_init(void) diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index fd0932b2d52..db808441153 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -135,7 +135,7 @@ static inline void ip32_power_button(void) add_timer(&power_timer); } -static irqreturn_t ip32_rtc_int(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t ip32_rtc_int(int irq, void *dev_id) { volatile unsigned char reg_c; diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index 6eac36d1b8c..bf328277c77 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -34,21 +34,21 @@ extern void smp_call_function_interrupt(void); * independent of board/firmware */ -static void *mailbox_0_set_regs[] = { +static volatile void *mailbox_0_set_regs[] = { IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU), }; -static void *mailbox_0_clear_regs[] = { +static volatile void *mailbox_0_clear_regs[] = { IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU), }; -static void *mailbox_0_regs[] = { +static volatile void *mailbox_0_regs[] = { IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU), diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c index bf12af46132..e136bde5248 100644 --- a/arch/mips/sibyte/bcm1480/time.c +++ b/arch/mips/sibyte/bcm1480/time.c @@ -47,6 +47,12 @@ #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 +#ifdef CONFIG_SIMULATION +#define BCM1480_HPT_VALUE 50000 +#else +#define BCM1480_HPT_VALUE 1000000 +#endif + extern int bcm1480_steal_irq(int irq); void bcm1480_time_init(void) @@ -59,11 +65,6 @@ void bcm1480_time_init(void) BUG(); } - if (!cpu) { - /* Use our own gettimeoffset() routine */ - do_gettimeoffset = bcm1480_gettimeoffset; - } - bcm1480_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ @@ -74,11 +75,7 @@ void bcm1480_time_init(void) /* Disable the timer and set up the count */ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); __raw_writeq( -#ifndef CONFIG_SIMULATION - 1000000/HZ -#else - 50000/HZ -#endif + BCM1480_HPT_VALUE/HZ , IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); /* Set the timer running */ @@ -122,16 +119,16 @@ void bcm1480_timer_interrupt(void) } } -/* - * We use our own do_gettimeoffset() instead of the generic one, - * because the generic one does not work for SMP case. - * In addition, since we use general timer 0 for system time, - * we can get accurate intra-jiffy offset without calibration. - */ -unsigned long bcm1480_gettimeoffset(void) +static unsigned int bcm1480_hpt_read(void) { + /* We assume this function is called xtime_lock held. */ unsigned long count = __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count; +} - return 1000000/HZ - count; +void __init bcm1480_hpt_setup(void) +{ + mips_hpt_read = bcm1480_hpt_read; + mips_hpt_frequency = BCM1480_HPT_VALUE; } diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c index 992e0d8dbb6..d1a906e683b 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/sb1250/bcm1250_tbprof.c @@ -88,7 +88,7 @@ static void arm_tb(void) sbp.tb_armed = 1; } -static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sbprof_tb_intr(int irq, void *dev_id) { int i; DBG(printk(DEVNAME ": tb_intr\n")); @@ -138,7 +138,7 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id, struct pt_regs *regs) return IRQ_HANDLED; } -static irqreturn_t sbprof_pc_intr(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sbprof_pc_intr(int irq, void *dev_id) { printk(DEVNAME ": unexpected pc_intr"); return IRQ_NONE; diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c index bb90649fbc4..45274bd3cd8 100644 --- a/arch/mips/sibyte/sb1250/bus_watcher.c +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -171,7 +171,7 @@ static void create_proc_decoder(struct bw_stats_struct *stats) * notes: possible re-entry due to multiple sources * should check/indicate saturation */ -static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs) +static irqreturn_t sibyte_bw_int(int irq, void *data) { struct bw_stats_struct *stats = data; unsigned long cntr; diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 0ccf1796dd7..bcb74f2c194 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -47,15 +47,11 @@ #define SB1250_HPT_NUM 3 #define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ -#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH) extern int sb1250_steal_irq(int irq); static unsigned int sb1250_hpt_read(void); -static void sb1250_hpt_init(unsigned int); - -static unsigned int hpt_offset; void __init sb1250_hpt_setup(void) { @@ -69,13 +65,9 @@ void __init sb1250_hpt_setup(void) __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - /* - * we need to fill 32 bits, so just use the upper 23 bits and pretend - * the timer is going 512Mhz instead of 1Mhz - */ - mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT; - mips_hpt_init = sb1250_hpt_init; + mips_hpt_frequency = V_SCD_TIMER_FREQ; mips_hpt_read = sb1250_hpt_read; + mips_hpt_mask = M_SCD_TIMER_INIT; } } @@ -149,11 +141,7 @@ void sb1250_timer_interrupt(void) /* * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over - * again. There's no easy way to set to a specific value so store init value - * in hpt_offset and subtract each time. - * - * Note: Timer isn't full 32bits so shift it into the upper part making - * it appear to run at a higher frequency. + * again. */ static unsigned int sb1250_hpt_read(void) { @@ -161,13 +149,5 @@ static unsigned int sb1250_hpt_read(void) count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); - count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT; - - return count - hpt_offset; -} - -static void sb1250_hpt_init(unsigned int count) -{ - hpt_offset = count; - return; + return SB1250_HPT_VALUE - count; } diff --git a/arch/mips/tx4927/common/smsc_fdc37m81x.c b/arch/mips/tx4927/common/smsc_fdc37m81x.c new file mode 100644 index 00000000000..33f517bc9a0 --- /dev/null +++ b/arch/mips/tx4927/common/smsc_fdc37m81x.c @@ -0,0 +1,172 @@ +/* + * Interface for smsc fdc48m81x Super IO chip + * + * Author: MontaVista Software, Inc. source@mvista.com + * + * 2001-2003 (c) MontaVista Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + * + * Copyright 2004 (c) MontaVista Software, Inc. + */ +#include <linux/init.h> +#include <linux/types.h> +#include <asm/io.h> +#include <asm/tx4927/smsc_fdc37m81x.h> + +#define DEBUG + +/* Common Registers */ +#define SMSC_FDC37M81X_CONFIG_INDEX 0x00 +#define SMSC_FDC37M81X_CONFIG_DATA 0x01 +#define SMSC_FDC37M81X_CONF 0x02 +#define SMSC_FDC37M81X_INDEX 0x03 +#define SMSC_FDC37M81X_DNUM 0x07 +#define SMSC_FDC37M81X_DID 0x20 +#define SMSC_FDC37M81X_DREV 0x21 +#define SMSC_FDC37M81X_PCNT 0x22 +#define SMSC_FDC37M81X_PMGT 0x23 +#define SMSC_FDC37M81X_OSC 0x24 +#define SMSC_FDC37M81X_CONFPA0 0x26 +#define SMSC_FDC37M81X_CONFPA1 0x27 +#define SMSC_FDC37M81X_TEST4 0x2B +#define SMSC_FDC37M81X_TEST5 0x2C +#define SMSC_FDC37M81X_TEST1 0x2D +#define SMSC_FDC37M81X_TEST2 0x2E +#define SMSC_FDC37M81X_TEST3 0x2F + +/* Logical device numbers */ +#define SMSC_FDC37M81X_FDD 0x00 +#define SMSC_FDC37M81X_SERIAL1 0x04 +#define SMSC_FDC37M81X_SERIAL2 0x05 +#define SMSC_FDC37M81X_KBD 0x07 + +/* Logical device Config Registers */ +#define SMSC_FDC37M81X_ACTIVE 0x30 +#define SMSC_FDC37M81X_BASEADDR0 0x60 +#define SMSC_FDC37M81X_BASEADDR1 0x61 +#define SMSC_FDC37M81X_INT 0x70 +#define SMSC_FDC37M81X_INT2 0x72 +#define SMSC_FDC37M81X_MODE 0xF0 + +/* Chip Config Values */ +#define SMSC_FDC37M81X_CONFIG_ENTER 0x55 +#define SMSC_FDC37M81X_CONFIG_EXIT 0xaa +#define SMSC_FDC37M81X_CHIP_ID 0x4d + +static unsigned long g_smsc_fdc37m81x_base = 0; + +static inline unsigned char smsc_fdc37m81x_rd(unsigned char index) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + + return inb(g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +static inline void smsc_dc37m81x_wr(unsigned char index, unsigned char data) +{ + outb(index, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + outb(data, g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_DATA); +} + +void smsc_fdc37m81x_config_beg(void) +{ + if (g_smsc_fdc37m81x_base) { + outb(SMSC_FDC37M81X_CONFIG_ENTER, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); + } +} + +void smsc_fdc37m81x_config_end(void) +{ + if (g_smsc_fdc37m81x_base) + outb(SMSC_FDC37M81X_CONFIG_EXIT, + g_smsc_fdc37m81x_base + SMSC_FDC37M81X_CONFIG_INDEX); +} + +u8 smsc_fdc37m81x_config_get(u8 reg) +{ + u8 val = 0; + + if (g_smsc_fdc37m81x_base) + val = smsc_fdc37m81x_rd(reg); + + return val; +} + +void smsc_fdc37m81x_config_set(u8 reg, u8 val) +{ + if (g_smsc_fdc37m81x_base) + smsc_dc37m81x_wr(reg, val); +} + +unsigned long __init smsc_fdc37m81x_init(unsigned long port) +{ + const int field = sizeof(unsigned long) * 2; + u8 chip_id; + + if (g_smsc_fdc37m81x_base) + printk("smsc_fdc37m81x_init() stepping on old base=0x%0*lx\n", + field, g_smsc_fdc37m81x_base); + + g_smsc_fdc37m81x_base = port; + + smsc_fdc37m81x_config_beg(); + + chip_id = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DID); + if (chip_id == SMSC_FDC37M81X_CHIP_ID) + smsc_fdc37m81x_config_end(); + else { + printk("smsc_fdc37m81x_init() unknow chip id 0x%02x\n", + chip_id); + g_smsc_fdc37m81x_base = 0; + } + + return g_smsc_fdc37m81x_base; +} + +#ifdef DEBUG +void smsc_fdc37m81x_config_dump_one(char *key, u8 dev, u8 reg) +{ + printk("%s: dev=0x%02x reg=0x%02x val=0x%02x\n", key, dev, reg, + smsc_fdc37m81x_rd(reg)); +} + +void smsc_fdc37m81x_config_dump(void) +{ + u8 orig; + char *fname = "smsc_fdc37m81x_config_dump()"; + + smsc_fdc37m81x_config_beg(); + + orig = smsc_fdc37m81x_rd(SMSC_FDC37M81X_DNUM); + + printk("%s: common\n", fname); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DNUM); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DID); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_DREV); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PCNT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_NONE, + SMSC_FDC37M81X_PMGT); + + printk("%s: keyboard\n", fname); + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, SMSC_FDC37M81X_KBD); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_ACTIVE); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_INT2); + smsc_fdc37m81x_config_dump_one(fname, SMSC_FDC37M81X_KBD, + SMSC_FDC37M81X_LDCR_F0); + + smsc_dc37m81x_wr(SMSC_FDC37M81X_DNUM, orig); + + smsc_fdc37m81x_config_end(); +} +#endif diff --git a/arch/mips/tx4927/common/tx4927_setup.c b/arch/mips/tx4927/common/tx4927_setup.c index 4658b2ae483..941c441729b 100644 --- a/arch/mips/tx4927/common/tx4927_setup.c +++ b/arch/mips/tx4927/common/tx4927_setup.c @@ -112,8 +112,6 @@ void print_cp0(char *key, int num, char *name, u32 val) return; } -indent: Standard input:25: Error:Unexpected end of file - void dump_cp0(char *key) { diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c index b926e6a75c2..08b20cdfd7b 100644 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c +++ b/arch/mips/tx4938/toshiba_rbtx4938/spi_txx9.c @@ -36,14 +36,18 @@ void __init txx9_spi_init(unsigned long base, int (*cs_func)(int chipid, int on) static DECLARE_WAIT_QUEUE_HEAD(txx9_spi_wait); -static void txx9_spi_interrupt(int irq, void *dev_id) +static irqreturn_t txx9_spi_interrupt(int irq, void *dev_id) { /* disable rx intr */ tx4938_spiptr->cr0 &= ~TXx9_SPCR0_RBSIE; wake_up(&txx9_spi_wait); + + return IRQ_HANDLED; } + static struct irqaction txx9_spi_action = { - txx9_spi_interrupt, 0, 0, "spi", NULL, NULL, + .handler = txx9_spi_interrupt, + .name = "spi", }; void __init txx9_spi_irqinit(int irc_irq) diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c index 6d57553d8ef..8f6a0b312f7 100644 --- a/arch/parisc/kernel/parisc_ksyms.c +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -69,10 +69,6 @@ EXPORT_SYMBOL(memcpy_toio); EXPORT_SYMBOL(memcpy_fromio); EXPORT_SYMBOL(memset_io); -#include <asm/unistd.h> -EXPORT_SYMBOL(sys_lseek); -EXPORT_SYMBOL(sys_write); - #include <asm/semaphore.h> EXPORT_SYMBOL(__up); EXPORT_SYMBOL(__down_interruptible); diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index b3677fc8eef..7b943b45f7c 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -153,13 +153,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 8b691046557..0673dbedb24 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -740,7 +740,7 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y - depends on SMP && PPC_PSERIES + depends on (SMP && PPC_PSERIES) || PPC_CELL config ARCH_POPULATES_NODE_MAP def_bool y @@ -751,6 +751,15 @@ config ARCH_MEMORY_PROBE def_bool y depends on MEMORY_HOTPLUG +# Some NUMA nodes have memory ranges that span +# other nodes. Even though a pfn is valid and +# between a node's start and end pfns, it may not +# reside on that node. See memmap_init_zone() +# for details. +config NODES_SPAN_OTHER_NODES + def_bool y + depends on NEED_MULTIPLE_NODES + config PPC_64K_PAGES bool "64k page size" depends on PPC64 diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 37ddfcab000..4b2be611f77 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -115,7 +115,7 @@ endif quiet_cmd_wrap = WRAP $@ cmd_wrap =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) vmlinux quiet_cmd_wrap_initrd = WRAP $@ - cmd_wrap_initrd =$(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ + cmd_wrap_initrd =$(CONFIG_SHELL) $(wrapper) -c -o $@ -p $2 $(CROSSWRAP) \ -i $(obj)/ramdisk.image.gz vmlinux $(obj)/zImage.chrp: vmlinux $(wrapperbits) diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index eab7318729e..b5fb1fee76f 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -179,11 +179,11 @@ if [ -z "$cacheit" ]; then fi if [ -n "$initrd" ]; then - addsec $tmp "$initrd" initrd + addsec $tmp "$initrd" $isection fi if [ -n "$dtb" ]; then - addsec $tmp "$dtb" dtb + addsec $tmp "$dtb" .kernel:dtb fi if [ "$platform" != "miboot" ]; then diff --git a/arch/powerpc/boot/zImage.lds.S b/arch/powerpc/boot/zImage.lds.S index 4b6bb3ffe3d..4be3c6414b0 100644 --- a/arch/powerpc/boot/zImage.lds.S +++ b/arch/powerpc/boot/zImage.lds.S @@ -21,6 +21,11 @@ SECTIONS __got2_end = .; } + . = ALIGN(8); + _dtb_start = .; + .kernel:dtb : { *(.kernel:dtb) } + _dtb_end = .; + . = ALIGN(4096); _vmlinux_start = .; .kernel:vmlinux.strip : { *(.kernel:vmlinux.strip) } diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index 892d5dd3254..0aba06d7d2e 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -254,6 +254,7 @@ CONFIG_SYN_COOKIES=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +# CONFIG_INET_XFRM_MODE_BEET is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -275,7 +276,9 @@ CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y +# CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +# CONFIG_IPV6_SIT is not set CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -406,6 +409,12 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y @@ -738,7 +747,6 @@ CONFIG_GEN_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -802,6 +810,7 @@ CONFIG_I2C_ALGOBIT=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -810,14 +819,9 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_HWMON_VID is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -923,6 +927,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -930,6 +935,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set @@ -1129,6 +1135,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_LIST is not set # CONFIG_FORCED_INLINING is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/powerpc/configs/mpc834x_itx_defconfig b/arch/powerpc/configs/mpc834x_itx_defconfig index cd3535e1a09..0561b73a918 100644 --- a/arch/powerpc/configs/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/mpc834x_itx_defconfig @@ -1248,7 +1248,7 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set -# CONFIG_MSDOS_PARTITION is not set +CONFIG_MSDOS_PARTITION=y # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 9828663652e..d2833c1a1f3 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -184,6 +184,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y CONFIG_RESOURCES_64BIT=y CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y +CONFIG_NODES_SPAN_OTHER_NODES=y # CONFIG_PPC_64K_PAGES is not set CONFIG_SCHED_SMT=y CONFIG_PROC_DEVICETREE=y diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 8b133afbdc2..7af23c43fd4 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_6xx) += idle_6xx.o l2cr_6xx.o cpu_setup_6xx.o obj-$(CONFIG_TAU) += tau_6xx.o obj32-$(CONFIG_SOFTWARE_SUSPEND) += swsusp_32.o obj32-$(CONFIG_MODULES) += module_32.o -obj-$(CONFIG_E500) += perfmon_fsl_booke.o ifeq ($(CONFIG_PPC_MERGE),y) diff --git a/arch/powerpc/kernel/btext.c b/arch/powerpc/kernel/btext.c index 995fcef156f..93f21aaf7c8 100644 --- a/arch/powerpc/kernel/btext.c +++ b/arch/powerpc/kernel/btext.c @@ -182,7 +182,7 @@ int btext_initialize(struct device_node *np) prop = get_property(np, "linux,bootx-linebytes", NULL); if (prop == NULL) prop = get_property(np, "linebytes", NULL); - if (prop) + if (prop && *prop != 0xffffffffu) pitch = *prop; if (pitch == 1) pitch = 0x1000; diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 47a613cdd77..bfd499ee375 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -18,6 +18,7 @@ #include <asm/oprofile_impl.h> #include <asm/cputable.h> +#include <asm/prom.h> /* for PTRRELOC on ARCH=ppc */ struct cpu_spec* cur_cpu_spec = NULL; EXPORT_SYMBOL(cur_cpu_spec); @@ -73,7 +74,7 @@ extern void __restore_cpu_ppc970(void); #define PPC_FEATURE_SPE_COMP 0 #endif -struct cpu_spec cpu_specs[] = { +static struct cpu_spec cpu_specs[] = { #ifdef CONFIG_PPC64 { /* Power3 */ .pvr_mask = 0xffff0000, @@ -227,6 +228,21 @@ struct cpu_spec cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .platform = "ppc970", }, + { /* PPC970GX */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x00450000, + .cpu_name = "PPC970GX", + .cpu_features = CPU_FTRS_PPC970, + .cpu_user_features = COMMON_USER_POWER4 | + PPC_FEATURE_HAS_ALTIVEC_COMP, + .icache_bsize = 128, + .dcache_bsize = 128, + .num_pmcs = 8, + .cpu_setup = __setup_cpu_ppc970, + .oprofile_cpu_type = "ppc64/970", + .oprofile_type = PPC_OPROFILE_POWER4, + .platform = "ppc970", + }, { /* Power5 GR */ .pvr_mask = 0xffff0000, .pvr_value = 0x003a0000, @@ -268,7 +284,7 @@ struct cpu_spec cpu_specs[] = { .cpu_user_features = COMMON_USER_POWER6, .icache_bsize = 128, .dcache_bsize = 128, - .num_pmcs = 8, + .num_pmcs = 6, .oprofile_cpu_type = "ppc64/power6", .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = POWER6_MMCRA_SIHV, @@ -1152,3 +1168,71 @@ struct cpu_spec cpu_specs[] = { #endif /* !CLASSIC_PPC */ #endif /* CONFIG_PPC32 */ }; + +struct cpu_spec *identify_cpu(unsigned long offset) +{ + struct cpu_spec *s = cpu_specs; + struct cpu_spec **cur = &cur_cpu_spec; + unsigned int pvr = mfspr(SPRN_PVR); + int i; + + s = PTRRELOC(s); + cur = PTRRELOC(cur); + + if (*cur != NULL) + return PTRRELOC(*cur); + + for (i = 0; i < ARRAY_SIZE(cpu_specs); i++,s++) + if ((pvr & s->pvr_mask) == s->pvr_value) { + *cur = cpu_specs + i; +#ifdef CONFIG_PPC64 + /* ppc64 expects identify_cpu to also call setup_cpu + * for that processor. I will consolidate that at a + * later time, for now, just use our friend #ifdef. + * we also don't need to PTRRELOC the function pointer + * on ppc64 as we are running at 0 in real mode. + */ + if (s->cpu_setup) { + s->cpu_setup(offset, s); + } +#endif /* CONFIG_PPC64 */ + return s; + } + BUG(); + return NULL; +} + +void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end) +{ + struct fixup_entry { + unsigned long mask; + unsigned long value; + long start_off; + long end_off; + } *fcur, *fend; + + fcur = fixup_start; + fend = fixup_end; + + for (; fcur < fend; fcur++) { + unsigned int *pstart, *pend, *p; + + if ((value & fcur->mask) == fcur->value) + continue; + + /* These PTRRELOCs will disappear once the new scheme for + * modules and vdso is implemented + */ + pstart = ((unsigned int *)fcur) + (fcur->start_off / 4); + pend = ((unsigned int *)fcur) + (fcur->end_off / 4); + + for (p = pstart; p < pend; p++) { + *p = 0x60000000u; + asm volatile ("dcbst 0, %0" : : "r" (p)); + } + asm volatile ("sync" : : : "memory"); + for (p = pstart; p < pend; p++) + asm volatile ("icbi 0,%0" : : "r" (p)); + asm volatile ("sync; isync" : : : "memory"); + } +} diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 645c7f10fb2..e720729f3e5 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -487,7 +487,7 @@ BEGIN_FTR_SECTION rlwimi r13,r12,16,0x20 mfcr r12 cmpwi r13,0x2c - beq .do_stab_bolted_pSeries + beq do_stab_bolted_pSeries mtcrf 0x80,r12 mfspr r12,SPRN_SPRG2 END_FTR_SECTION_IFCLR(CPU_FTR_SLB) @@ -600,7 +600,7 @@ system_call_pSeries: STD_EXCEPTION_PSERIES(., performance_monitor) .align 7 -_GLOBAL(do_stab_bolted_pSeries) +do_stab_bolted_pSeries: mtcrf 0x80,r12 mfspr r12,SPRN_SPRG2 EXCEPTION_PROLOG_PSERIES(PACA_EXSLB, .do_stab_bolted) @@ -1046,7 +1046,7 @@ slb_miss_fault: li r5,0 std r4,_DAR(r1) std r5,_DSISR(r1) - b .handle_page_fault + b handle_page_fault unrecov_user_slb: EXCEPTION_PROLOG_COMMON(0x4200, PACA_EXGEN) @@ -1174,12 +1174,13 @@ program_check_common: .globl fp_unavailable_common fp_unavailable_common: EXCEPTION_PROLOG_COMMON(0x800, PACA_EXGEN) - bne .load_up_fpu /* if from user, just load it up */ + bne 1f /* if from user, just load it up */ bl .save_nvgprs addi r3,r1,STACK_FRAME_OVERHEAD ENABLE_INTS bl .kernel_fp_unavailable_exception BUG_OPCODE +1: b .load_up_fpu .align 7 .globl altivec_unavailable_common @@ -1279,10 +1280,10 @@ _GLOBAL(do_hash_page) std r4,_DSISR(r1) andis. r0,r4,0xa450 /* weird error? */ - bne- .handle_page_fault /* if not, try to insert a HPTE */ + bne- handle_page_fault /* if not, try to insert a HPTE */ BEGIN_FTR_SECTION andis. r0,r4,0x0020 /* Is it a segment table fault? */ - bne- .do_ste_alloc /* If so handle it */ + bne- do_ste_alloc /* If so handle it */ END_FTR_SECTION_IFCLR(CPU_FTR_SLB) /* @@ -1324,7 +1325,7 @@ BEGIN_FW_FTR_SECTION * because ret_from_except_lite will check for and handle pending * interrupts if necessary. */ - beq .ret_from_except_lite + beq 13f /* For a hash failure, we don't bother re-enabling interrupts */ ble- 12f @@ -1346,14 +1347,14 @@ BEGIN_FW_FTR_SECTION END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES) /* Here we have a page fault that hash_page can't handle. */ -_GLOBAL(handle_page_fault) +handle_page_fault: ENABLE_INTS 11: ld r4,_DAR(r1) ld r5,_DSISR(r1) addi r3,r1,STACK_FRAME_OVERHEAD bl .do_page_fault cmpdi r3,0 - beq+ .ret_from_except_lite + beq+ 13f bl .save_nvgprs mr r5,r3 addi r3,r1,STACK_FRAME_OVERHEAD @@ -1370,12 +1371,14 @@ _GLOBAL(handle_page_fault) bl .low_hash_fault b .ret_from_except +13: b .ret_from_except_lite + /* here we have a segment miss */ -_GLOBAL(do_ste_alloc) +do_ste_alloc: bl .ste_allocate /* try to insert stab entry */ cmpdi r3,0 - beq+ fast_exception_return - b .handle_page_fault + bne- handle_page_fault + b fast_exception_return /* * r13 points to the PACA, r9 contains the saved CR, @@ -1580,11 +1583,6 @@ _STATIC(__start_initialization_iSeries) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - LOAD_REG_IMMEDIATE(r3,cpu_specs) - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - li r5,0 - bl .identify_cpu - LOAD_REG_IMMEDIATE(r2,__toc_start) addi r2,r2,0x4000 addi r2,r2,0x4000 @@ -1646,6 +1644,8 @@ _GLOBAL(__start_initialization_multiplatform) cmpwi r0,0x3c /* 970FX */ beq 1f cmpwi r0,0x44 /* 970MP */ + beq 1f + cmpwi r0,0x45 /* 970GX */ bne 2f 1: bl .__cpu_preinit_ppc970 2: @@ -1964,13 +1964,6 @@ _STATIC(start_here_multiplatform) addi r2,r2,0x4000 add r2,r2,r26 - LOAD_REG_IMMEDIATE(r3, cpu_specs) - add r3,r3,r26 - LOAD_REG_IMMEDIATE(r4,cur_cpu_spec) - add r4,r4,r26 - mr r5,r26 - bl .identify_cpu - /* Do very early kernel initializations, including initial hash table, * stab and slb setup before we turn on relocation. */ @@ -2000,13 +1993,6 @@ _STATIC(start_here_common) li r0,0 stdu r0,-STACK_FRAME_OVERHEAD(r1) - /* Apply the CPUs-specific fixups (nop out sections not relevant - * to this CPU - */ - li r3,0 - bl .do_cpu_ftr_fixups - bl .do_fw_ftr_fixups - /* ptr to current */ LOAD_REG_IMMEDIATE(r4, init_task) std r4,PACACURRENT(r13) diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index f88a2a675d9..ba6b7256084 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -47,6 +47,17 @@ static int novmerge = 0; static int novmerge = 1; #endif +static inline unsigned long iommu_num_pages(unsigned long vaddr, + unsigned long slen) +{ + unsigned long npages; + + npages = IOMMU_PAGE_ALIGN(vaddr + slen) - (vaddr & IOMMU_PAGE_MASK); + npages >>= IOMMU_PAGE_SHIFT; + + return npages; +} + static int __init setup_iommu(char *str) { if (!strcmp(str, "novmerge")) @@ -178,10 +189,10 @@ static dma_addr_t iommu_alloc(struct iommu_table *tbl, void *page, } entry += tbl->it_offset; /* Offset into real TCE table */ - ret = entry << PAGE_SHIFT; /* Set the return dma address */ + ret = entry << IOMMU_PAGE_SHIFT; /* Set the return dma address */ /* Put the TCEs in the HW table */ - ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & PAGE_MASK, + ppc_md.tce_build(tbl, entry, npages, (unsigned long)page & IOMMU_PAGE_MASK, direction); @@ -203,7 +214,7 @@ static void __iommu_free(struct iommu_table *tbl, dma_addr_t dma_addr, unsigned long entry, free_entry; unsigned long i; - entry = dma_addr >> PAGE_SHIFT; + entry = dma_addr >> IOMMU_PAGE_SHIFT; free_entry = entry - tbl->it_offset; if (((free_entry + npages) > tbl->it_size) || @@ -270,7 +281,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, /* Init first segment length for backout at failure */ outs->dma_length = 0; - DBG("mapping %d elements:\n", nelems); + DBG("sg mapping %d elements:\n", nelems); spin_lock_irqsave(&(tbl->it_lock), flags); @@ -285,9 +296,8 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, } /* Allocate iommu entries for that segment */ vaddr = (unsigned long)page_address(s->page) + s->offset; - npages = PAGE_ALIGN(vaddr + slen) - (vaddr & PAGE_MASK); - npages >>= PAGE_SHIFT; - entry = iommu_range_alloc(tbl, npages, &handle, mask >> PAGE_SHIFT, 0); + npages = iommu_num_pages(vaddr, slen); + entry = iommu_range_alloc(tbl, npages, &handle, mask >> IOMMU_PAGE_SHIFT, 0); DBG(" - vaddr: %lx, size: %lx\n", vaddr, slen); @@ -301,14 +311,14 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, /* Convert entry to a dma_addr_t */ entry += tbl->it_offset; - dma_addr = entry << PAGE_SHIFT; - dma_addr |= s->offset; + dma_addr = entry << IOMMU_PAGE_SHIFT; + dma_addr |= (s->offset & ~IOMMU_PAGE_MASK); - DBG(" - %lx pages, entry: %lx, dma_addr: %lx\n", + DBG(" - %lu pages, entry: %lx, dma_addr: %lx\n", npages, entry, dma_addr); /* Insert into HW table */ - ppc_md.tce_build(tbl, entry, npages, vaddr & PAGE_MASK, direction); + ppc_md.tce_build(tbl, entry, npages, vaddr & IOMMU_PAGE_MASK, direction); /* If we are in an open segment, try merging */ if (segstart != s) { @@ -323,7 +333,7 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, DBG(" can't merge, new segment.\n"); } else { outs->dma_length += s->length; - DBG(" merged, new len: %lx\n", outs->dma_length); + DBG(" merged, new len: %ux\n", outs->dma_length); } } @@ -367,9 +377,8 @@ int iommu_map_sg(struct device *dev, struct iommu_table *tbl, if (s->dma_length != 0) { unsigned long vaddr, npages; - vaddr = s->dma_address & PAGE_MASK; - npages = (PAGE_ALIGN(s->dma_address + s->dma_length) - vaddr) - >> PAGE_SHIFT; + vaddr = s->dma_address & IOMMU_PAGE_MASK; + npages = iommu_num_pages(s->dma_address, s->dma_length); __iommu_free(tbl, vaddr, npages); s->dma_address = DMA_ERROR_CODE; s->dma_length = 0; @@ -398,8 +407,7 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, if (sglist->dma_length == 0) break; - npages = (PAGE_ALIGN(dma_handle + sglist->dma_length) - - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT; + npages = iommu_num_pages(dma_handle,sglist->dma_length); __iommu_free(tbl, dma_handle, npages); sglist++; } @@ -532,12 +540,11 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, BUG_ON(direction == DMA_NONE); uaddr = (unsigned long)vaddr; - npages = PAGE_ALIGN(uaddr + size) - (uaddr & PAGE_MASK); - npages >>= PAGE_SHIFT; + npages = iommu_num_pages(uaddr, size); if (tbl) { dma_handle = iommu_alloc(tbl, vaddr, npages, direction, - mask >> PAGE_SHIFT, 0); + mask >> IOMMU_PAGE_SHIFT, 0); if (dma_handle == DMA_ERROR_CODE) { if (printk_ratelimit()) { printk(KERN_INFO "iommu_alloc failed, " @@ -545,7 +552,7 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, tbl, vaddr, npages); } } else - dma_handle |= (uaddr & ~PAGE_MASK); + dma_handle |= (uaddr & ~IOMMU_PAGE_MASK); } return dma_handle; @@ -554,11 +561,14 @@ dma_addr_t iommu_map_single(struct iommu_table *tbl, void *vaddr, void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, size_t size, enum dma_data_direction direction) { + unsigned int npages; + BUG_ON(direction == DMA_NONE); - if (tbl) - iommu_free(tbl, dma_handle, (PAGE_ALIGN(dma_handle + size) - - (dma_handle & PAGE_MASK)) >> PAGE_SHIFT); + if (tbl) { + npages = iommu_num_pages(dma_handle, size); + iommu_free(tbl, dma_handle, npages); + } } /* Allocates a contiguous real buffer and creates mappings over it. @@ -570,11 +580,11 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, { void *ret = NULL; dma_addr_t mapping; - unsigned int npages, order; + unsigned int order; + unsigned int nio_pages, io_order; struct page *page; size = PAGE_ALIGN(size); - npages = size >> PAGE_SHIFT; order = get_order(size); /* @@ -598,8 +608,10 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, memset(ret, 0, size); /* Set up tces to cover the allocated range */ - mapping = iommu_alloc(tbl, ret, npages, DMA_BIDIRECTIONAL, - mask >> PAGE_SHIFT, order); + nio_pages = size >> IOMMU_PAGE_SHIFT; + io_order = get_iommu_order(size); + mapping = iommu_alloc(tbl, ret, nio_pages, DMA_BIDIRECTIONAL, + mask >> IOMMU_PAGE_SHIFT, io_order); if (mapping == DMA_ERROR_CODE) { free_pages((unsigned long)ret, order); return NULL; @@ -611,12 +623,13 @@ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, void iommu_free_coherent(struct iommu_table *tbl, size_t size, void *vaddr, dma_addr_t dma_handle) { - unsigned int npages; - if (tbl) { + unsigned int nio_pages; + + size = PAGE_ALIGN(size); + nio_pages = size >> IOMMU_PAGE_SHIFT; + iommu_free(tbl, dma_handle, nio_pages); size = PAGE_ALIGN(size); - npages = size >> PAGE_SHIFT; - iommu_free(tbl, dma_handle, npages); free_pages((unsigned long)vaddr, get_order(size)); } } diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index 88fd73fdf04..412bea3cf81 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -102,80 +102,6 @@ _GLOBAL(reloc_got2) blr /* - * identify_cpu, - * called with r3 = data offset and r4 = CPU number - * doesn't change r3 - */ -_GLOBAL(identify_cpu) - addis r8,r3,cpu_specs@ha - addi r8,r8,cpu_specs@l - mfpvr r7 -1: - lwz r5,CPU_SPEC_PVR_MASK(r8) - and r5,r5,r7 - lwz r6,CPU_SPEC_PVR_VALUE(r8) - cmplw 0,r6,r5 - beq 1f - addi r8,r8,CPU_SPEC_ENTRY_SIZE - b 1b -1: - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - sub r8,r8,r3 - stw r8,0(r6) - blr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - lwz r4,0(r6) - add r4,r4,r3 - lwz r4,CPU_SPEC_FEATURES(r4) - - /* Get the fixup table */ - addis r6,r3,__start___ftr_fixup@ha - addi r6,r6,__start___ftr_fixup@l - addis r7,r3,__stop___ftr_fixup@ha - addi r7,r7,__stop___ftr_fixup@l - - /* Do the fixup */ -1: cmplw 0,r6,r7 - bgelr - addi r6,r6,16 - lwz r8,-16(r6) /* mask */ - and r8,r8,r4 - lwz r9,-12(r6) /* value */ - cmplw 0,r8,r9 - beq 1b - lwz r8,-8(r6) /* section begin */ - lwz r9,-4(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - add r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -/* * call_setup_cpu - call the setup_cpu function for this cpu * r3 = data offset, r24 = cpu number * diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index c70e20708a1..21fd2c662a9 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -246,130 +246,6 @@ _GLOBAL(__flush_dcache_icache) isync blr -/* - * identify_cpu and calls setup_cpu - * In: r3 = base of the cpu_specs array - * r4 = address of cur_cpu_spec - * r5 = relocation offset - */ -_GLOBAL(identify_cpu) - mfpvr r7 -1: - lwz r8,CPU_SPEC_PVR_MASK(r3) - and r8,r8,r7 - lwz r9,CPU_SPEC_PVR_VALUE(r3) - cmplw 0,r9,r8 - beq 1f - addi r3,r3,CPU_SPEC_ENTRY_SIZE - b 1b -1: - sub r0,r3,r5 - std r0,0(r4) - ld r4,CPU_SPEC_SETUP(r3) - cmpdi 0,r4,0 - add r4,r4,r5 - beqlr - ld r4,0(r4) - add r4,r4,r5 - mtctr r4 - /* Calling convention for cpu setup is r3=offset, r4=cur_cpu_spec */ - mr r4,r3 - mr r3,r5 - bctr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - LOAD_REG_IMMEDIATE(r6,cur_cpu_spec) - sub r6,r6,r3 - ld r4,0(r6) - sub r4,r4,r3 - ld r4,CPU_SPEC_FEATURES(r4) - /* Get the fixup table */ - LOAD_REG_IMMEDIATE(r6,__start___ftr_fixup) - sub r6,r6,r3 - LOAD_REG_IMMEDIATE(r7,__stop___ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -/* - * do_fw_ftr_fixups - goes through the list of firmware feature fixups - * and writes nop's over sections of code that don't apply for this firmware. - * r3 = data offset (not changed) - */ -_GLOBAL(do_fw_ftr_fixups) - /* Get firmware features */ - LOAD_REG_IMMEDIATE(r6,powerpc_firmware_features) - sub r6,r6,r3 - ld r4,0(r6) - /* Get the fixup table */ - LOAD_REG_IMMEDIATE(r6,__start___fw_ftr_fixup) - sub r6,r6,r3 - LOAD_REG_IMMEDIATE(r7,__stop___fw_ftr_fixup) - sub r7,r7,r3 - /* Do the fixup */ -1: cmpld r6,r7 - bgelr - addi r6,r6,32 - ld r8,-32(r6) /* mask */ - and r8,r8,r4 - ld r9,-24(r6) /* value */ - cmpld r8,r9 - beq 1b - ld r8,-16(r6) /* section begin */ - ld r9,-8(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - sub r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) -BEGIN_FTR_SECTION - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -END_FTR_SECTION_IFSET(CPU_FTR_SPLIT_ID_CACHE) - addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b #if defined(CONFIG_PPC_PMAC) || defined(CONFIG_PPC_MAPLE) /* diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c index 92f4e5f64f0..e2c3c6a85f3 100644 --- a/arch/powerpc/kernel/module_32.c +++ b/arch/powerpc/kernel/module_32.c @@ -24,6 +24,8 @@ #include <linux/kernel.h> #include <linux/cache.h> +#include "setup.h" + #if 0 #define DEBUGP printk #else @@ -269,33 +271,50 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, return 0; } +static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + const char *name) +{ + char *secstrings; + unsigned int i; + + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) + if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0) + return &sechdrs[i]; + return NULL; +} + int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs, struct module *me) { - char *secstrings; - unsigned int i; + const Elf_Shdr *sect; me->arch.bug_table = NULL; me->arch.num_bugs = 0; /* Find the __bug_table section, if present */ - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) { - if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) - continue; - me->arch.bug_table = (void *) sechdrs[i].sh_addr; - me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); - break; + sect = find_section(hdr, sechdrs, "__bug_table"); + if (sect != NULL) { + me->arch.bug_table = (void *) sect->sh_addr; + me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry); } - /* + /* * Strictly speaking this should have a spinlock to protect against * traversals, but since we only traverse on BUG()s, a spinlock * could potentially lead to deadlock and thus be counter-productive. */ list_add(&me->arch.bug_list, &module_bug_list); + /* Apply feature fixups */ + sect = find_section(hdr, sechdrs, "__ftr_fixup"); + if (sect != NULL) + do_feature_fixups(cur_cpu_spec->cpu_features, + (void *)sect->sh_addr, + (void *)sect->sh_addr + sect->sh_size); + return 0; } diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c index ba34001fca8..8dd1f0aae5d 100644 --- a/arch/powerpc/kernel/module_64.c +++ b/arch/powerpc/kernel/module_64.c @@ -22,6 +22,9 @@ #include <linux/vmalloc.h> #include <asm/module.h> #include <asm/uaccess.h> +#include <asm/firmware.h> + +#include "setup.h" /* FIXME: We don't do .init separately. To do this, we'd need to have a separate r2 value in the init and core section, and stub between @@ -400,6 +403,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, | (value & 0x03fffffc); break; + case R_PPC64_REL64: + /* 64 bits relative (used by features fixups) */ + *location = value - (unsigned long)location; + break; + default: printk("%s: Unknown ADD relocation: %lu\n", me->name, @@ -413,23 +421,33 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, LIST_HEAD(module_bug_list); -int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, struct module *me) +static const Elf_Shdr *find_section(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, + const char *name) { char *secstrings; unsigned int i; + secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + for (i = 1; i < hdr->e_shnum; i++) + if (strcmp(secstrings+sechdrs[i].sh_name, name) == 0) + return &sechdrs[i]; + return NULL; +} + +int module_finalize(const Elf_Ehdr *hdr, + const Elf_Shdr *sechdrs, struct module *me) +{ + const Elf_Shdr *sect; + me->arch.bug_table = NULL; me->arch.num_bugs = 0; /* Find the __bug_table section, if present */ - secstrings = (char *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (i = 1; i < hdr->e_shnum; i++) { - if (strcmp(secstrings+sechdrs[i].sh_name, "__bug_table")) - continue; - me->arch.bug_table = (void *) sechdrs[i].sh_addr; - me->arch.num_bugs = sechdrs[i].sh_size / sizeof(struct bug_entry); - break; + sect = find_section(hdr, sechdrs, "__bug_table"); + if (sect != NULL) { + me->arch.bug_table = (void *) sect->sh_addr; + me->arch.num_bugs = sect->sh_size / sizeof(struct bug_entry); } /* @@ -439,6 +457,19 @@ int module_finalize(const Elf_Ehdr *hdr, */ list_add(&me->arch.bug_list, &module_bug_list); + /* Apply feature fixups */ + sect = find_section(hdr, sechdrs, "__ftr_fixup"); + if (sect != NULL) + do_feature_fixups(cur_cpu_spec->cpu_features, + (void *)sect->sh_addr, + (void *)sect->sh_addr + sect->sh_size); + + sect = find_section(hdr, sechdrs, "__fw_ftr_fixup"); + if (sect != NULL) + do_feature_fixups(powerpc_firmware_features, + (void *)sect->sh_addr, + (void *)sect->sh_addr + sect->sh_size); + return 0; } diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c index 9b49f8691d2..0d9ff72e285 100644 --- a/arch/powerpc/kernel/pci_32.c +++ b/arch/powerpc/kernel/pci_32.c @@ -441,14 +441,14 @@ update_bridge_base(struct pci_bus *bus, int i) end = res->end - off; io_base_lo = (start >> 8) & PCI_IO_RANGE_MASK; io_limit_lo = (end >> 8) & PCI_IO_RANGE_MASK; - if (end > 0xffff) { - pci_write_config_word(dev, PCI_IO_BASE_UPPER16, - start >> 16); - pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, - end >> 16); + if (end > 0xffff) io_base_lo |= PCI_IO_RANGE_TYPE_32; - } else + else io_base_lo |= PCI_IO_RANGE_TYPE_16; + pci_write_config_word(dev, PCI_IO_BASE_UPPER16, + start >> 16); + pci_write_config_word(dev, PCI_IO_LIMIT_UPPER16, + end >> 16); pci_write_config_byte(dev, PCI_IO_BASE, io_base_lo); pci_write_config_byte(dev, PCI_IO_LIMIT, io_limit_lo); diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 78d3c0fc8df..9bae8a5bf67 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -199,8 +199,14 @@ struct pci_controller * pcibios_alloc_controller(struct device_node *dev) pci_setup_pci_controller(phb); phb->arch_data = dev; phb->is_dynamic = mem_init_done; - if (dev) - PHB_SET_NODE(phb, of_node_to_nid(dev)); + if (dev) { + int nid = of_node_to_nid(dev); + + if (nid < 0 || !node_online(nid)) + nid = -1; + + PHB_SET_NODE(phb, nid); + } return phb; } diff --git a/arch/powerpc/kernel/perfmon_fsl_booke.c b/arch/powerpc/kernel/perfmon_fsl_booke.c deleted file mode 100644 index e0dcf2b41fb..00000000000 --- a/arch/powerpc/kernel/perfmon_fsl_booke.c +++ /dev/null @@ -1,221 +0,0 @@ -/* arch/powerpc/kernel/perfmon_fsl_booke.c - * Freescale Book-E Performance Monitor code - * - * Author: Andy Fleming - * Copyright (c) 2004 Freescale Semiconductor, Inc - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/stddef.h> -#include <linux/unistd.h> -#include <linux/ptrace.h> -#include <linux/slab.h> -#include <linux/user.h> -#include <linux/a.out.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/prctl.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/io.h> -#include <asm/reg.h> -#include <asm/xmon.h> -#include <asm/pmc.h> - -static inline u32 get_pmlca(int ctr); -static inline void set_pmlca(int ctr, u32 pmlca); - -static inline u32 get_pmlca(int ctr) -{ - u32 pmlca; - - switch (ctr) { - case 0: - pmlca = mfpmr(PMRN_PMLCA0); - break; - case 1: - pmlca = mfpmr(PMRN_PMLCA1); - break; - case 2: - pmlca = mfpmr(PMRN_PMLCA2); - break; - case 3: - pmlca = mfpmr(PMRN_PMLCA3); - break; - default: - panic("Bad ctr number\n"); - } - - return pmlca; -} - -static inline void set_pmlca(int ctr, u32 pmlca) -{ - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - break; - default: - panic("Bad ctr number\n"); - } -} - -void init_pmc_stop(int ctr) -{ - u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | - PMLCA_FCM1 | PMLCA_FCM0); - u32 pmlcb = 0; - - switch (ctr) { - case 0: - mtpmr(PMRN_PMLCA0, pmlca); - mtpmr(PMRN_PMLCB0, pmlcb); - break; - case 1: - mtpmr(PMRN_PMLCA1, pmlca); - mtpmr(PMRN_PMLCB1, pmlcb); - break; - case 2: - mtpmr(PMRN_PMLCA2, pmlca); - mtpmr(PMRN_PMLCB2, pmlcb); - break; - case 3: - mtpmr(PMRN_PMLCA3, pmlca); - mtpmr(PMRN_PMLCB3, pmlcb); - break; - default: - panic("Bad ctr number!\n"); - } -} - -void set_pmc_event(int ctr, int event) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - pmlca = (pmlca & ~PMLCA_EVENT_MASK) | - ((event << PMLCA_EVENT_SHIFT) & - PMLCA_EVENT_MASK); - - set_pmlca(ctr, pmlca); -} - -void set_pmc_user_kernel(int ctr, int user, int kernel) -{ - u32 pmlca; - - pmlca = get_pmlca(ctr); - - if(user) - pmlca &= ~PMLCA_FCU; - else - pmlca |= PMLCA_FCU; - - if(kernel) - pmlca &= ~PMLCA_FCS; - else - pmlca |= PMLCA_FCS; - - set_pmlca(ctr, pmlca); -} - -void set_pmc_marked(int ctr, int mark0, int mark1) -{ - u32 pmlca = get_pmlca(ctr); - - if(mark0) - pmlca &= ~PMLCA_FCM0; - else - pmlca |= PMLCA_FCM0; - - if(mark1) - pmlca &= ~PMLCA_FCM1; - else - pmlca |= PMLCA_FCM1; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctr(int ctr, int enable) -{ - u32 pmlca = get_pmlca(ctr); - - pmlca &= ~PMLCA_FC; - - if (enable) - pmlca |= PMLCA_CE; - else - pmlca &= ~PMLCA_CE; - - set_pmlca(ctr, pmlca); -} - -void pmc_start_ctrs(int enable) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 &= ~PMGC0_FAC; - pmgc0 |= PMGC0_FCECE; - - if (enable) - pmgc0 |= PMGC0_PMIE; - else - pmgc0 &= ~PMGC0_PMIE; - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void pmc_stop_ctrs(void) -{ - u32 pmgc0 = mfpmr(PMRN_PMGC0); - - pmgc0 |= PMGC0_FAC; - - pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); - - mtpmr(PMRN_PMGC0, pmgc0); -} - -void dump_pmcs(void) -{ - printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); - printk("pmc\t\tpmlca\t\tpmlcb\n"); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), - mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), - mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), - mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); - printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), - mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); -} - -EXPORT_SYMBOL(init_pmc_stop); -EXPORT_SYMBOL(set_pmc_event); -EXPORT_SYMBOL(set_pmc_user_kernel); -EXPORT_SYMBOL(set_pmc_marked); -EXPORT_SYMBOL(pmc_start_ctr); -EXPORT_SYMBOL(pmc_start_ctrs); -EXPORT_SYMBOL(pmc_stop_ctrs); -EXPORT_SYMBOL(dump_pmcs); diff --git a/arch/powerpc/kernel/pmc.c b/arch/powerpc/kernel/pmc.c index a0a2efadeab..3d8f6f44641 100644 --- a/arch/powerpc/kernel/pmc.c +++ b/arch/powerpc/kernel/pmc.c @@ -71,7 +71,7 @@ int reserve_pmc_hardware(perf_irq_t new_perf_irq) } pmc_owner_caller = __builtin_return_address(0); - perf_irq = new_perf_irq ? : dummy_perf; + perf_irq = new_perf_irq ? new_perf_irq : dummy_perf; out: spin_unlock(&pmc_owner_lock); diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index 7b2f6452ba7..f3d4dd580dd 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -341,13 +341,6 @@ struct task_struct *__switch_to(struct task_struct *prev, static int instructions_to_print = 16; -#ifdef CONFIG_PPC64 -#define BAD_PC(pc) ((REGION_ID(pc) != KERNEL_REGION_ID) && \ - (REGION_ID(pc) != VMALLOC_REGION_ID)) -#else -#define BAD_PC(pc) ((pc) < KERNELBASE) -#endif - static void show_instructions(struct pt_regs *regs) { int i; @@ -366,7 +359,8 @@ static void show_instructions(struct pt_regs *regs) * bad address because the pc *should* only be a * kernel address. */ - if (BAD_PC(pc) || __get_user(instr, (unsigned int __user *)pc)) { + if (!__kernel_text_address(pc) || + __get_user(instr, (unsigned int __user *)pc)) { printk("XXXXXXXX "); } else { if (regs->nip == pc) diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 865b9648d0d..bdb412d4b74 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -1014,7 +1014,7 @@ EXPORT_SYMBOL(find_all_nodes); /** Checks if the given "compat" string matches one of the strings in * the device's "compatible" property */ -int device_is_compatible(struct device_node *device, const char *compat) +int device_is_compatible(const struct device_node *device, const char *compat) { const char* cp; int cplen, l; @@ -1491,7 +1491,8 @@ static int __init prom_reconfig_setup(void) __initcall(prom_reconfig_setup); #endif -struct property *of_find_property(struct device_node *np, const char *name, +struct property *of_find_property(const struct device_node *np, + const char *name, int *lenp) { struct property *pp; @@ -1512,7 +1513,8 @@ struct property *of_find_property(struct device_node *np, const char *name, * Find a property with a given name for a given node * and return the value. */ -const void *get_property(struct device_node *np, const char *name, int *lenp) +const void *get_property(const struct device_node *np, const char *name, + int *lenp) { struct property *pp = of_find_property(np,name,lenp); return pp ? pp->value : NULL; diff --git a/arch/powerpc/kernel/rtas_flash.c b/arch/powerpc/kernel/rtas_flash.c index 1442b63a75d..6f6fc977cb3 100644 --- a/arch/powerpc/kernel/rtas_flash.c +++ b/arch/powerpc/kernel/rtas_flash.c @@ -72,6 +72,10 @@ #define VALIDATE_BUF_SIZE 4096 #define RTAS_MSG_MAXLEN 64 +/* Quirk - RTAS requires 4k list length and block size */ +#define RTAS_BLKLIST_LENGTH 4096 +#define RTAS_BLK_SIZE 4096 + struct flash_block { char *data; unsigned long length; @@ -83,7 +87,7 @@ struct flash_block { * into a version/length and translate the pointers * to absolute. */ -#define FLASH_BLOCKS_PER_NODE ((PAGE_SIZE - 16) / sizeof(struct flash_block)) +#define FLASH_BLOCKS_PER_NODE ((RTAS_BLKLIST_LENGTH - 16) / sizeof(struct flash_block)) struct flash_block_list { unsigned long num_blocks; struct flash_block_list *next; @@ -96,6 +100,9 @@ struct flash_block_list_header { /* just the header of flash_block_list */ static struct flash_block_list_header rtas_firmware_flash_list = {0, NULL}; +/* Use slab cache to guarantee 4k alignment */ +static kmem_cache_t *flash_block_cache = NULL; + #define FLASH_BLOCK_LIST_VERSION (1UL) /* Local copy of the flash block list. @@ -153,7 +160,7 @@ static int flash_list_valid(struct flash_block_list *flist) return FLASH_IMG_NULL_DATA; } block_size = f->blocks[i].length; - if (block_size <= 0 || block_size > PAGE_SIZE) { + if (block_size <= 0 || block_size > RTAS_BLK_SIZE) { return FLASH_IMG_BAD_LEN; } image_size += block_size; @@ -177,9 +184,9 @@ static void free_flash_list(struct flash_block_list *f) while (f) { for (i = 0; i < f->num_blocks; i++) - free_page((unsigned long)(f->blocks[i].data)); + kmem_cache_free(flash_block_cache, f->blocks[i].data); next = f->next; - free_page((unsigned long)f); + kmem_cache_free(flash_block_cache, f); f = next; } } @@ -278,6 +285,12 @@ static ssize_t rtas_flash_read(struct file *file, char __user *buf, return msglen; } +/* constructor for flash_block_cache */ +void rtas_block_ctor(void *ptr, kmem_cache_t *cache, unsigned long flags) +{ + memset(ptr, 0, RTAS_BLK_SIZE); +} + /* We could be much more efficient here. But to keep this function * simple we allocate a page to the block list no matter how small the * count is. If the system is low on memory it will be just as well @@ -302,7 +315,7 @@ static ssize_t rtas_flash_write(struct file *file, const char __user *buffer, * proc file */ if (uf->flist == NULL) { - uf->flist = (struct flash_block_list *) get_zeroed_page(GFP_KERNEL); + uf->flist = kmem_cache_alloc(flash_block_cache, GFP_KERNEL); if (!uf->flist) return -ENOMEM; } @@ -313,21 +326,21 @@ static ssize_t rtas_flash_write(struct file *file, const char __user *buffer, next_free = fl->num_blocks; if (next_free == FLASH_BLOCKS_PER_NODE) { /* Need to allocate another block_list */ - fl->next = (struct flash_block_list *)get_zeroed_page(GFP_KERNEL); + fl->next = kmem_cache_alloc(flash_block_cache, GFP_KERNEL); if (!fl->next) return -ENOMEM; fl = fl->next; next_free = 0; } - if (count > PAGE_SIZE) - count = PAGE_SIZE; - p = (char *)get_zeroed_page(GFP_KERNEL); + if (count > RTAS_BLK_SIZE) + count = RTAS_BLK_SIZE; + p = kmem_cache_alloc(flash_block_cache, GFP_KERNEL); if (!p) return -ENOMEM; if(copy_from_user(p, buffer, count)) { - free_page((unsigned long)p); + kmem_cache_free(flash_block_cache, p); return -EFAULT; } fl->blocks[next_free].data = p; @@ -791,6 +804,16 @@ int __init rtas_flash_init(void) goto cleanup; rtas_flash_term_hook = rtas_flash_firmware; + + flash_block_cache = kmem_cache_create("rtas_flash_cache", + RTAS_BLK_SIZE, RTAS_BLK_SIZE, 0, + rtas_block_ctor, NULL); + if (!flash_block_cache) { + printk(KERN_ERR "%s: failed to create block cache\n", + __FUNCTION__); + rc = -ENOMEM; + goto cleanup; + } return 0; cleanup: @@ -805,6 +828,10 @@ cleanup: void __exit rtas_flash_cleanup(void) { rtas_flash_term_hook = NULL; + + if (flash_block_cache) + kmem_cache_destroy(flash_block_cache); + remove_flash_pde(firmware_flash_pde); remove_flash_pde(firmware_update_pde); remove_flash_pde(validate_pde); diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c index 191d0ab0922..a4c2964a3ca 100644 --- a/arch/powerpc/kernel/setup_32.c +++ b/arch/powerpc/kernel/setup_32.c @@ -91,6 +91,7 @@ int ucache_bsize; unsigned long __init early_init(unsigned long dt_ptr) { unsigned long offset = reloc_offset(); + struct cpu_spec *spec; /* First zero the BSS -- use memset_io, some platforms don't have * caches on yet */ @@ -100,8 +101,11 @@ unsigned long __init early_init(unsigned long dt_ptr) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ - identify_cpu(offset, 0); - do_cpu_ftr_fixups(offset); + spec = identify_cpu(offset); + + do_feature_fixups(spec->cpu_features, + PTRRELOC(&__start___ftr_fixup), + PTRRELOC(&__stop___ftr_fixup)); return KERNELBASE + offset; } diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index 4b2e32eab9d..16278968dab 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -170,6 +170,9 @@ void __init setup_paca(int cpu) void __init early_setup(unsigned long dt_ptr) { + /* Identify CPU type */ + identify_cpu(0); + /* Assume we're on cpu 0 for now. Don't write to the paca yet! */ setup_paca(0); @@ -348,6 +351,14 @@ void __init setup_system(void) { DBG(" -> setup_system()\n"); + /* Apply the CPUs-specific and firmware specific fixups to kernel + * text (nop out sections not relevant to this CPU or this firmware) + */ + do_feature_fixups(cur_cpu_spec->cpu_features, + &__start___ftr_fixup, &__stop___ftr_fixup); + do_feature_fixups(powerpc_firmware_features, + &__start___fw_ftr_fixup, &__stop___fw_ftr_fixup); + /* * Unflatten the device-tree passed by prom_init or kexec */ diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c index 5b59bc18dfe..46a24de36fe 100644 --- a/arch/powerpc/kernel/time.c +++ b/arch/powerpc/kernel/time.c @@ -220,11 +220,8 @@ static void account_process_time(struct pt_regs *regs) */ struct cpu_purr_data { int initialized; /* thread is running */ - u64 tb0; /* timebase at origin time */ - u64 purr0; /* PURR at origin time */ u64 tb; /* last TB value read */ u64 purr; /* last PURR value read */ - u64 stolen; /* stolen time so far */ spinlock_t lock; }; @@ -234,10 +231,8 @@ static void snapshot_tb_and_purr(void *data) { struct cpu_purr_data *p = &__get_cpu_var(cpu_purr_data); - p->tb0 = mftb(); - p->purr0 = mfspr(SPRN_PURR); - p->tb = p->tb0; - p->purr = 0; + p->tb = mftb(); + p->purr = mfspr(SPRN_PURR); wmb(); p->initialized = 1; } @@ -258,37 +253,24 @@ void snapshot_timebases(void) void calculate_steal_time(void) { - u64 tb, purr, t0; + u64 tb, purr; s64 stolen; - struct cpu_purr_data *p0, *pme, *phim; - int cpu; + struct cpu_purr_data *pme; if (!cpu_has_feature(CPU_FTR_PURR)) return; - cpu = smp_processor_id(); - pme = &per_cpu(cpu_purr_data, cpu); + pme = &per_cpu(cpu_purr_data, smp_processor_id()); if (!pme->initialized) return; /* this can happen in early boot */ - p0 = &per_cpu(cpu_purr_data, cpu & ~1); - phim = &per_cpu(cpu_purr_data, cpu ^ 1); - spin_lock(&p0->lock); + spin_lock(&pme->lock); tb = mftb(); - purr = mfspr(SPRN_PURR) - pme->purr0; - if (!phim->initialized || !cpu_online(cpu ^ 1)) { - stolen = (tb - pme->tb) - (purr - pme->purr); - } else { - t0 = pme->tb0; - if (phim->tb0 < t0) - t0 = phim->tb0; - stolen = phim->tb - t0 - phim->purr - purr - p0->stolen; - } - if (stolen > 0) { + purr = mfspr(SPRN_PURR); + stolen = (tb - pme->tb) - (purr - pme->purr); + if (stolen > 0) account_steal_time(current, stolen); - p0->stolen += stolen; - } pme->tb = tb; pme->purr = purr; - spin_unlock(&p0->lock); + spin_unlock(&pme->lock); } /* @@ -297,30 +279,17 @@ void calculate_steal_time(void) */ static void snapshot_purr(void) { - int cpu; - u64 purr; - struct cpu_purr_data *p0, *pme, *phim; + struct cpu_purr_data *pme; unsigned long flags; if (!cpu_has_feature(CPU_FTR_PURR)) return; - cpu = smp_processor_id(); - pme = &per_cpu(cpu_purr_data, cpu); - p0 = &per_cpu(cpu_purr_data, cpu & ~1); - phim = &per_cpu(cpu_purr_data, cpu ^ 1); - spin_lock_irqsave(&p0->lock, flags); - pme->tb = pme->tb0 = mftb(); - purr = mfspr(SPRN_PURR); - if (!phim->initialized) { - pme->purr = 0; - pme->purr0 = purr; - } else { - /* set p->purr and p->purr0 for no change in p0->stolen */ - pme->purr = phim->tb - phim->tb0 - phim->purr - p0->stolen; - pme->purr0 = purr - pme->purr; - } + pme = &per_cpu(cpu_purr_data, smp_processor_id()); + spin_lock_irqsave(&pme->lock, flags); + pme->tb = mftb(); + pme->purr = mfspr(SPRN_PURR); pme->initialized = 1; - spin_unlock_irqrestore(&p0->lock, flags); + spin_unlock_irqrestore(&pme->lock, flags); } #endif /* CONFIG_PPC_SPLPAR */ @@ -1045,48 +1014,6 @@ void __init time_init(void) set_dec(tb_ticks_per_jiffy); } -#ifdef CONFIG_RTC_CLASS -static int set_rtc_class_time(struct rtc_time *tm) -{ - int err; - struct class_device *class_dev = - rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); - - if (class_dev == NULL) - return -ENODEV; - - err = rtc_set_time(class_dev, tm); - - rtc_class_close(class_dev); - - return 0; -} - -static void get_rtc_class_time(struct rtc_time *tm) -{ - int err; - struct class_device *class_dev = - rtc_class_open(CONFIG_RTC_HCTOSYS_DEVICE); - - if (class_dev == NULL) - return; - - err = rtc_read_time(class_dev, tm); - - rtc_class_close(class_dev); - - return; -} - -int __init rtc_class_hookup(void) -{ - ppc_md.get_rtc_time = get_rtc_class_time; - ppc_md.set_rtc_time = set_rtc_class_time; - - return 0; -} -#endif /* CONFIG_RTC_CLASS */ - #define FEBRUARY 2 #define STARTOFTIME 1970 diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index d9f10f2fc37..c66b4771ef4 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -843,7 +843,7 @@ void __kprobes program_check_exception(struct pt_regs *regs) void alignment_exception(struct pt_regs *regs) { - int fixed = 0; + int sig, code, fixed = 0; /* we don't implement logging of alignment exceptions */ if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS)) @@ -857,14 +857,16 @@ void alignment_exception(struct pt_regs *regs) /* Operand address was bad */ if (fixed == -EFAULT) { - if (user_mode(regs)) - _exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar); - else - /* Search exception table */ - bad_page_fault(regs, regs->dar, SIGSEGV); - return; + sig = SIGSEGV; + code = SEGV_ACCERR; + } else { + sig = SIGBUS; + code = BUS_ADRALN; } - _exception(SIGBUS, regs, BUS_ADRALN, regs->dar); + if (user_mode(regs)) + _exception(sig, regs, code, regs->dar); + else + bad_page_fault(regs, regs->dar, sig); } void StackOverflow(struct pt_regs *regs) @@ -900,14 +902,13 @@ void kernel_fp_unavailable_exception(struct pt_regs *regs) void altivec_unavailable_exception(struct pt_regs *regs) { -#if !defined(CONFIG_ALTIVEC) if (user_mode(regs)) { /* A user program has executed an altivec instruction, but this kernel doesn't support altivec. */ _exception(SIGILL, regs, ILL_ILLOPC, regs->nip); return; } -#endif + printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception " "%lx at %lx\n", regs->trap, regs->nip); die("Unrecoverable VMX/Altivec Unavailable Exception", regs, SIGABRT); diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index 1a7e19cdab3..c913ad5cad2 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -36,6 +36,8 @@ #include <asm/vdso.h> #include <asm/vdso_datapage.h> +#include "setup.h" + #undef DEBUG #ifdef DEBUG @@ -586,6 +588,43 @@ static __init int vdso_fixup_datapage(struct lib32_elfinfo *v32, return 0; } + +static __init int vdso_fixup_features(struct lib32_elfinfo *v32, + struct lib64_elfinfo *v64) +{ + void *start32; + unsigned long size32; + +#ifdef CONFIG_PPC64 + void *start64; + unsigned long size64; + + start64 = find_section64(v64->hdr, "__ftr_fixup", &size64); + if (start64) + do_feature_fixups(cur_cpu_spec->cpu_features, + start64, start64 + size64); + + start64 = find_section64(v64->hdr, "__fw_ftr_fixup", &size64); + if (start64) + do_feature_fixups(powerpc_firmware_features, + start64, start64 + size64); +#endif /* CONFIG_PPC64 */ + + start32 = find_section32(v32->hdr, "__ftr_fixup", &size32); + if (start32) + do_feature_fixups(cur_cpu_spec->cpu_features, + start32, start32 + size32); + +#ifdef CONFIG_PPC64 + start32 = find_section32(v32->hdr, "__fw_ftr_fixup", &size32); + if (start32) + do_feature_fixups(powerpc_firmware_features, + start32, start32 + size32); +#endif /* CONFIG_PPC64 */ + + return 0; +} + static __init int vdso_fixup_alt_funcs(struct lib32_elfinfo *v32, struct lib64_elfinfo *v64) { @@ -634,6 +673,9 @@ static __init int vdso_setup(void) if (vdso_fixup_datapage(&v32, &v64)) return -1; + if (vdso_fixup_features(&v32, &v64)) + return -1; + if (vdso_fixup_alt_funcs(&v32, &v64)) return -1; @@ -714,6 +756,7 @@ void __init vdso_init(void) * Setup the syscall map in the vDOS */ vdso_setup_syscall_map(); + /* * Initialize the vDSO images in memory, that is do necessary * fixups of vDSO symbols, locate trampolines, etc... diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S index 6187af2d54c..26e138c4ce1 100644 --- a/arch/powerpc/kernel/vdso32/vdso32.lds.S +++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S @@ -32,6 +32,18 @@ SECTIONS PROVIDE (_etext = .); PROVIDE (etext = .); + . = ALIGN(8); + __ftr_fixup : { + *(__ftr_fixup) + } + +#ifdef CONFIG_PPC64 + . = ALIGN(8); + __fw_ftr_fixup : { + *(__fw_ftr_fixup) + } +#endif + /* Other stuff is appended to the text segment: */ .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } .rodata1 : { *(.rodata1) } diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S index 56e76ff5498..40ffd9b6cef 100644 --- a/arch/powerpc/kernel/vdso64/gettimeofday.S +++ b/arch/powerpc/kernel/vdso64/gettimeofday.S @@ -229,8 +229,10 @@ V_FUNCTION_BEGIN(__do_get_xsec) xor r0,r8,r8 /* create dependency */ add r3,r3,r0 - /* Get TB & offset it */ - mftb r7 + /* Get TB & offset it. We use the MFTB macro which will generate + * workaround code for Cell. + */ + MFTB(r7) ld r9,CFG_TB_ORIG_STAMP(r3) subf r7,r9,r7 diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S index 4a2b6dc0960..2d70f35d50b 100644 --- a/arch/powerpc/kernel/vdso64/vdso64.lds.S +++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S @@ -31,6 +31,16 @@ SECTIONS PROVIDE (_etext = .); PROVIDE (etext = .); + . = ALIGN(8); + __ftr_fixup : { + *(__ftr_fixup) + } + + . = ALIGN(8); + __fw_ftr_fixup : { + *(__fw_ftr_fixup) + } + /* Other stuff is appended to the text segment: */ .rodata : { *(.rodata .rodata.* .gnu.linkonce.r.*) } .rodata1 : { *(.rodata1) } diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index cb87e71eec6..ed007878d1b 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -92,9 +92,9 @@ static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) &tbl->it_index, &offset, &size); /* TCE table size - measured in tce entries */ - tbl->it_size = size >> PAGE_SHIFT; + tbl->it_size = size >> IOMMU_PAGE_SHIFT; /* offset for VIO should always be 0 */ - tbl->it_offset = offset >> PAGE_SHIFT; + tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; tbl->it_busno = 0; tbl->it_type = TCE_VB; diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index cb0e8d46c3e..e8342d86753 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -108,13 +108,7 @@ SECTIONS .initcall.init : { __initcall_start = .; - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS __initcall_end = .; } diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 9590ba780b9..7e8ded051b5 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -9,6 +9,7 @@ * 2 of the License, or (at your option) any later version. */ #include <linux/kernel.h> +#include <linux/kprobes.h> #include <linux/ptrace.h> #include <asm/sstep.h> #include <asm/processor.h> @@ -25,7 +26,7 @@ extern char system_call_common[]; /* * Determine whether a conditional branch instruction would branch. */ -static int branch_taken(unsigned int instr, struct pt_regs *regs) +static int __kprobes branch_taken(unsigned int instr, struct pt_regs *regs) { unsigned int bo = (instr >> 21) & 0x1f; unsigned int bi; @@ -51,7 +52,7 @@ static int branch_taken(unsigned int instr, struct pt_regs *regs) * or -1 if the instruction is one that should not be stepped, * such as an rfid, or a mtmsrd that would clear MSR_RI. */ -int emulate_step(struct pt_regs *regs, unsigned int instr) +int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) { unsigned int opcode, rd; unsigned long int imm; diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c index 5615acc2952..506d89768d4 100644 --- a/arch/powerpc/mm/hugetlbpage.c +++ b/arch/powerpc/mm/hugetlbpage.c @@ -480,9 +480,6 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) mm->context.high_htlb_areas |= newareas; - /* update the paca copy of the context struct */ - get_paca()->context = mm->context; - /* the context change must make it to memory before the flush, * so that further SLB misses do the right thing. */ mb(); @@ -494,11 +491,15 @@ static int open_high_hpage_areas(struct mm_struct *mm, u16 newareas) return 0; } -int prepare_hugepage_range(unsigned long addr, unsigned long len) +int prepare_hugepage_range(unsigned long addr, unsigned long len, pgoff_t pgoff) { int err = 0; - if ( (addr+len) < addr ) + if (pgoff & (~HPAGE_MASK >> PAGE_SHIFT)) + return -EINVAL; + if (len & ~HPAGE_MASK) + return -EINVAL; + if (addr & ~HPAGE_MASK) return -EINVAL; if (addr < 0x100000000UL) diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index 16fe027bbc1..d1c0758c561 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -307,11 +307,12 @@ void __init paging_init(void) top_of_ram, total_ram); printk(KERN_DEBUG "Memory hole size: %ldMB\n", (top_of_ram - total_ram) >> 20); + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); #ifdef CONFIG_HIGHMEM - max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT; - max_zone_pfns[1] = top_of_ram >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[ZONE_HIGHMEM] = top_of_ram >> PAGE_SHIFT; #else - max_zone_pfns[0] = top_of_ram >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = top_of_ram >> PAGE_SHIFT; #endif free_area_init_nodes(max_zone_pfns); } diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 43c272075e1..9da01dc8cfd 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -617,9 +617,9 @@ void __init do_init_bootmem(void) void __init paging_init(void) { - unsigned long max_zone_pfns[MAX_NR_ZONES] = { - lmb_end_of_DRAM() >> PAGE_SHIFT - }; + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT; free_area_init_nodes(max_zone_pfns); } diff --git a/arch/powerpc/oprofile/Makefile b/arch/powerpc/oprofile/Makefile index 3145d610b5b..0b5df9c96ae 100644 --- a/arch/powerpc/oprofile/Makefile +++ b/arch/powerpc/oprofile/Makefile @@ -13,4 +13,4 @@ DRIVER_OBJS := $(addprefix ../../../drivers/oprofile/, \ oprofile-y := $(DRIVER_OBJS) common.o backtrace.o oprofile-$(CONFIG_PPC64) += op_model_rs64.o op_model_power4.o oprofile-$(CONFIG_FSL_BOOKE) += op_model_fsl_booke.o -oprofile-$(CONFIG_PPC32) += op_model_7450.o +oprofile-$(CONFIG_6xx) += op_model_7450.o diff --git a/arch/powerpc/oprofile/common.c b/arch/powerpc/oprofile/common.c index fd0bbbe7a4d..63bbef3b63f 100644 --- a/arch/powerpc/oprofile/common.c +++ b/arch/powerpc/oprofile/common.c @@ -34,6 +34,11 @@ static void op_handle_interrupt(struct pt_regs *regs) model->handle_interrupt(regs, ctr); } +static void op_powerpc_cpu_setup(void *dummy) +{ + model->cpu_setup(ctr); +} + static int op_powerpc_setup(void) { int err; @@ -47,7 +52,7 @@ static int op_powerpc_setup(void) model->reg_setup(ctr, &sys, model->num_counters); /* Configure the registers on all cpus. */ - on_each_cpu(model->cpu_setup, NULL, 0, 1); + on_each_cpu(op_powerpc_cpu_setup, NULL, 0, 1); return 0; } @@ -142,7 +147,8 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) case PPC_OPROFILE_POWER4: model = &op_model_power4; break; -#else +#endif +#ifdef CONFIG_6xx case PPC_OPROFILE_G4: model = &op_model_7450; break; diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c index d8ee3aea83f..f481c0ed5e6 100644 --- a/arch/powerpc/oprofile/op_model_7450.c +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -81,7 +81,7 @@ static void pmc_stop_ctrs(void) /* Configures the counters on this CPU based on the global * settings */ -static void fsl7450_cpu_setup(void *unused) +static void fsl7450_cpu_setup(struct op_counter_config *ctr) { /* freeze all counters */ pmc_stop_ctrs(); diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c index e29dede3142..0b3c31f5209 100644 --- a/arch/powerpc/oprofile/op_model_fsl_booke.c +++ b/arch/powerpc/oprofile/op_model_fsl_booke.c @@ -32,42 +32,152 @@ static unsigned long reset_value[OP_MAX_COUNTER]; static int num_counters; static int oprofile_running; -static inline unsigned int ctr_read(unsigned int i) +static void init_pmc_stop(int ctr) { - switch(i) { - case 0: - return mfpmr(PMRN_PMC0); - case 1: - return mfpmr(PMRN_PMC1); - case 2: - return mfpmr(PMRN_PMC2); - case 3: - return mfpmr(PMRN_PMC3); - default: - return 0; - } -} + u32 pmlca = (PMLCA_FC | PMLCA_FCS | PMLCA_FCU | + PMLCA_FCM1 | PMLCA_FCM0); + u32 pmlcb = 0; -static inline void ctr_write(unsigned int i, unsigned int val) -{ - switch(i) { + switch (ctr) { case 0: - mtpmr(PMRN_PMC0, val); + mtpmr(PMRN_PMLCA0, pmlca); + mtpmr(PMRN_PMLCB0, pmlcb); break; case 1: - mtpmr(PMRN_PMC1, val); + mtpmr(PMRN_PMLCA1, pmlca); + mtpmr(PMRN_PMLCB1, pmlcb); break; case 2: - mtpmr(PMRN_PMC2, val); + mtpmr(PMRN_PMLCA2, pmlca); + mtpmr(PMRN_PMLCB2, pmlcb); break; case 3: - mtpmr(PMRN_PMC3, val); + mtpmr(PMRN_PMLCA3, pmlca); + mtpmr(PMRN_PMLCB3, pmlcb); break; default: - break; + panic("Bad ctr number!\n"); } } +static void set_pmc_event(int ctr, int event) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + pmlca = (pmlca & ~PMLCA_EVENT_MASK) | + ((event << PMLCA_EVENT_SHIFT) & + PMLCA_EVENT_MASK); + + set_pmlca(ctr, pmlca); +} + +static void set_pmc_user_kernel(int ctr, int user, int kernel) +{ + u32 pmlca; + + pmlca = get_pmlca(ctr); + + if(user) + pmlca &= ~PMLCA_FCU; + else + pmlca |= PMLCA_FCU; + + if(kernel) + pmlca &= ~PMLCA_FCS; + else + pmlca |= PMLCA_FCS; + + set_pmlca(ctr, pmlca); +} + +static void set_pmc_marked(int ctr, int mark0, int mark1) +{ + u32 pmlca = get_pmlca(ctr); + + if(mark0) + pmlca &= ~PMLCA_FCM0; + else + pmlca |= PMLCA_FCM0; + + if(mark1) + pmlca &= ~PMLCA_FCM1; + else + pmlca |= PMLCA_FCM1; + + set_pmlca(ctr, pmlca); +} + +static void pmc_start_ctr(int ctr, int enable) +{ + u32 pmlca = get_pmlca(ctr); + + pmlca &= ~PMLCA_FC; + + if (enable) + pmlca |= PMLCA_CE; + else + pmlca &= ~PMLCA_CE; + + set_pmlca(ctr, pmlca); +} + +static void pmc_start_ctrs(int enable) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 &= ~PMGC0_FAC; + pmgc0 |= PMGC0_FCECE; + + if (enable) + pmgc0 |= PMGC0_PMIE; + else + pmgc0 &= ~PMGC0_PMIE; + + mtpmr(PMRN_PMGC0, pmgc0); +} + +static void pmc_stop_ctrs(void) +{ + u32 pmgc0 = mfpmr(PMRN_PMGC0); + + pmgc0 |= PMGC0_FAC; + + pmgc0 &= ~(PMGC0_PMIE | PMGC0_FCECE); + + mtpmr(PMRN_PMGC0, pmgc0); +} + +static void dump_pmcs(void) +{ + printk("pmgc0: %x\n", mfpmr(PMRN_PMGC0)); + printk("pmc\t\tpmlca\t\tpmlcb\n"); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC0), + mfpmr(PMRN_PMLCA0), mfpmr(PMRN_PMLCB0)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC1), + mfpmr(PMRN_PMLCA1), mfpmr(PMRN_PMLCB1)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC2), + mfpmr(PMRN_PMLCA2), mfpmr(PMRN_PMLCB2)); + printk("%8x\t%8x\t%8x\n", mfpmr(PMRN_PMC3), + mfpmr(PMRN_PMLCA3), mfpmr(PMRN_PMLCB3)); +} + +static void fsl_booke_cpu_setup(struct op_counter_config *ctr) +{ + int i; + + /* freeze all counters */ + pmc_stop_ctrs(); + + for (i = 0;i < num_counters;i++) { + init_pmc_stop(i); + + set_pmc_event(i, ctr[i].event); + + set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); + } +} static void fsl_booke_reg_setup(struct op_counter_config *ctr, struct op_system_config *sys, @@ -77,23 +187,14 @@ static void fsl_booke_reg_setup(struct op_counter_config *ctr, num_counters = num_ctrs; - /* freeze all counters */ - pmc_stop_ctrs(); - /* Our counters count up, and "count" refers to * how much before the next interrupt, and we interrupt * on overflow. So we calculate the starting value * which will give us "count" until overflow. * Then we set the events on the enabled counters */ - for (i = 0; i < num_counters; ++i) { + for (i = 0; i < num_counters; ++i) reset_value[i] = 0x80000000UL - ctr[i].count; - init_pmc_stop(i); - - set_pmc_event(i, ctr[i].event); - - set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel); - } } static void fsl_booke_start(struct op_counter_config *ctr) @@ -105,8 +206,8 @@ static void fsl_booke_start(struct op_counter_config *ctr) for (i = 0; i < num_counters; ++i) { if (ctr[i].enabled) { ctr_write(i, reset_value[i]); - /* Set Each enabled counterd to only - * count when the Mark bit is not set */ + /* Set each enabled counter to only + * count when the Mark bit is *not* set */ set_pmc_marked(i, 1, 0); pmc_start_ctr(i, 1); } else { @@ -177,6 +278,7 @@ static void fsl_booke_handle_interrupt(struct pt_regs *regs, struct op_powerpc_model op_model_fsl_booke = { .reg_setup = fsl_booke_reg_setup, + .cpu_setup = fsl_booke_cpu_setup, .start = fsl_booke_start, .stop = fsl_booke_stop, .handle_interrupt = fsl_booke_handle_interrupt, diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 506f6b79f89..356709d515b 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -76,13 +76,13 @@ static inline int mmcra_must_set_sample(void) { if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) || __is_processor(PV_970) || __is_processor(PV_970FX) || - __is_processor(PV_970MP)) + __is_processor(PV_970MP) || __is_processor(PV_970GX)) return 1; return 0; } -static void power4_cpu_setup(void *unused) +static void power4_cpu_setup(struct op_counter_config *ctr) { unsigned int mmcr0 = mmcr0_val; unsigned long mmcra = mmcra_val; diff --git a/arch/powerpc/oprofile/op_model_rs64.c b/arch/powerpc/oprofile/op_model_rs64.c index 042f8f4867a..19c5ee089bc 100644 --- a/arch/powerpc/oprofile/op_model_rs64.c +++ b/arch/powerpc/oprofile/op_model_rs64.c @@ -102,7 +102,7 @@ static void rs64_reg_setup(struct op_counter_config *ctr, /* XXX setup user and kernel profiling */ } -static void rs64_cpu_setup(void *unused) +static void rs64_cpu_setup(struct op_counter_config *ctr) { unsigned int mmcr0; diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 0975e94ac7c..7edb6b46138 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -32,6 +32,13 @@ config MPC834x_ITX Be aware that PCI initialization is the bootloader's responsiblilty. +config MPC8360E_PB + bool "Freescale MPC8360E PB" + select DEFAULT_UIMAGE + select QUICC_ENGINE + help + This option enables support for the MPC836x EMDS Processor Board. + endchoice config PPC_MPC832x @@ -46,4 +53,10 @@ config MPC834x select PPC_INDIRECT_PCI default y if MPC834x_SYS || MPC834x_ITX +config PPC_MPC836x + bool + select PPC_UDBG_16550 + select PPC_INDIRECT_PCI + default y if MPC8360E_PB + endmenu diff --git a/arch/powerpc/platforms/83xx/Makefile b/arch/powerpc/platforms/83xx/Makefile index 9387a110d28..f1aa7e24a93 100644 --- a/arch/powerpc/platforms/83xx/Makefile +++ b/arch/powerpc/platforms/83xx/Makefile @@ -5,3 +5,5 @@ obj-y := misc.o obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_MPC834x_SYS) += mpc834x_sys.o obj-$(CONFIG_MPC834x_ITX) += mpc834x_itx.o +obj-$(CONFIG_MPC8360E_PB) += mpc8360e_pb.o +obj-$(CONFIG_MPC832x_MDS) += mpc832x_mds.o diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c index 54dea9d42dc..a43ac71ab74 100644 --- a/arch/powerpc/platforms/83xx/mpc832x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c @@ -24,6 +24,7 @@ #include <linux/root_dev.h> #include <linux/initrd.h> +#include <asm/of_device.h> #include <asm/system.h> #include <asm/atomic.h> #include <asm/time.h> @@ -136,6 +137,24 @@ static void __init mpc832x_sys_setup_arch(void) #endif } +static int __init mpc832x_declare_of_platform_devices(void) +{ + struct device_node *np; + + for (np = NULL; (np = of_find_compatible_node(np, "network", + "ucc_geth")) != NULL;) { + int ucc_num; + char bus_id[BUS_ID_SIZE]; + + ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; + snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); + of_platform_device_create(np, bus_id, NULL); + } + + return 0; +} +device_initcall(mpc832x_declare_of_platform_devices); + void __init mpc832x_sys_init_IRQ(void) { diff --git a/arch/powerpc/platforms/83xx/mpc834x_itx.c b/arch/powerpc/platforms/83xx/mpc834x_itx.c index 5446bab08ec..e2bcaaf6b32 100644 --- a/arch/powerpc/platforms/83xx/mpc834x_itx.c +++ b/arch/powerpc/platforms/83xx/mpc834x_itx.c @@ -108,10 +108,6 @@ static int __init mpc834x_itx_probe(void) return 1; } -#ifdef CONFIG_RTC_CLASS -late_initcall(rtc_class_hookup); -#endif - define_machine(mpc834x_itx) { .name = "MPC834x ITX", .probe = mpc834x_itx_probe, diff --git a/arch/powerpc/platforms/83xx/mpc8360e_pb.c b/arch/powerpc/platforms/83xx/mpc8360e_pb.c index c0191900fc2..1a523c81c06 100644 --- a/arch/powerpc/platforms/83xx/mpc8360e_pb.c +++ b/arch/powerpc/platforms/83xx/mpc8360e_pb.c @@ -30,6 +30,7 @@ #include <linux/root_dev.h> #include <linux/initrd.h> +#include <asm/of_device.h> #include <asm/system.h> #include <asm/atomic.h> #include <asm/time.h> @@ -141,6 +142,24 @@ static void __init mpc8360_sys_setup_arch(void) #endif } +static int __init mpc8360_declare_of_platform_devices(void) +{ + struct device_node *np; + + for (np = NULL; (np = of_find_compatible_node(np, "network", + "ucc_geth")) != NULL;) { + int ucc_num; + char bus_id[BUS_ID_SIZE]; + + ucc_num = *((uint *) get_property(np, "device-id", NULL)) - 1; + snprintf(bus_id, BUS_ID_SIZE, "ucc_geth.%u", ucc_num); + of_platform_device_create(np, bus_id, NULL); + } + + return 0; +} +device_initcall(mpc8360_declare_of_platform_devices); + void __init mpc8360_sys_init_IRQ(void) { diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index ccfd0c4db87..7aa809d5a24 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -655,14 +655,19 @@ static int __init spu_map_interrupts(struct spu *spu, struct device_node *np) for (i=0; i < 3; i++) { ret = of_irq_map_one(np, i, &oirq); - if (ret) + if (ret) { + pr_debug("spu_new: failed to get irq %d\n", i); goto err; - + } ret = -EINVAL; + pr_debug(" irq %d no 0x%x on %s\n", i, oirq.specifier[0], + oirq.controller->full_name); spu->irqs[i] = irq_create_of_mapping(oirq.controller, oirq.specifier, oirq.size); - if (spu->irqs[i] == NO_IRQ) + if (spu->irqs[i] == NO_IRQ) { + pr_debug("spu_new: failed to map it !\n"); goto err; + } } return 0; @@ -681,7 +686,7 @@ static int spu_map_resource(struct device_node *node, int nr, struct resource resource = { }; int ret; - ret = of_address_to_resource(node, 0, &resource); + ret = of_address_to_resource(node, nr, &resource); if (ret) goto out; @@ -704,22 +709,42 @@ static int __init spu_map_device(struct spu *spu, struct device_node *node) ret = spu_map_resource(node, 0, (void __iomem**)&spu->local_store, &spu->local_store_phys); - if (ret) + if (ret) { + pr_debug("spu_new: failed to map %s resource 0\n", + node->full_name); goto out; + } ret = spu_map_resource(node, 1, (void __iomem**)&spu->problem, &spu->problem_phys); - if (ret) + if (ret) { + pr_debug("spu_new: failed to map %s resource 1\n", + node->full_name); goto out_unmap; + } ret = spu_map_resource(node, 2, (void __iomem**)&spu->priv2, NULL); - if (ret) + if (ret) { + pr_debug("spu_new: failed to map %s resource 2\n", + node->full_name); goto out_unmap; + } if (!firmware_has_feature(FW_FEATURE_LPAR)) ret = spu_map_resource(node, 3, (void __iomem**)&spu->priv1, NULL); - if (ret) + if (ret) { + pr_debug("spu_new: failed to map %s resource 3\n", + node->full_name); goto out_unmap; + } + pr_debug("spu_new: %s maps:\n", node->full_name); + pr_debug(" local store : 0x%016lx -> 0x%p\n", + spu->local_store_phys, spu->local_store); + pr_debug(" problem state : 0x%016lx -> 0x%p\n", + spu->problem_phys, spu->problem); + pr_debug(" priv2 : 0x%p\n", spu->priv2); + pr_debug(" priv1 : 0x%p\n", spu->priv1); + return 0; out_unmap: @@ -781,6 +806,17 @@ static int __init create_spu(struct device_node *spe) if (!spu) goto out; + spu->node = find_spu_node_id(spe); + if (spu->node >= MAX_NUMNODES) { + printk(KERN_WARNING "SPE %s on node %d ignored," + " node number too big\n", spe->full_name, spu->node); + printk(KERN_WARNING "Check if CONFIG_NUMA is enabled.\n"); + return -ENODEV; + } + spu->nid = of_node_to_nid(spe); + if (spu->nid == -1) + spu->nid = 0; + ret = spu_map_device(spu, spe); /* try old method */ if (ret) @@ -788,10 +824,6 @@ static int __init create_spu(struct device_node *spe) if (ret) goto out_free; - spu->node = find_spu_node_id(spe); - spu->nid = of_node_to_nid(spe); - if (spu->nid == -1) - spu->nid = 0; ret = spu_map_interrupts(spu, spe); if (ret) ret = spu_map_interrupts_old(spu, spe); diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index e0d73004526..533e2723e18 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -246,6 +246,7 @@ static int spufs_cntl_open(struct inode *inode, struct file *file) static struct file_operations spufs_cntl_fops = { .open = spufs_cntl_open, + .release = simple_attr_close, .read = simple_attr_read, .write = simple_attr_write, .mmap = spufs_cntl_mmap, @@ -384,7 +385,7 @@ static ssize_t spufs_mbox_read(struct file *file, char __user *buf, udata = (void __user *)buf; spu_acquire(ctx); - for (count = 0; count <= len; count += 4, udata++) { + for (count = 0; (count + 4) <= len; count += 4, udata++) { int ret; ret = ctx->ops->mbox_read(ctx, &mbox_data); if (ret == 0) diff --git a/arch/powerpc/platforms/cell/spufs/hw_ops.c b/arch/powerpc/platforms/cell/spufs/hw_ops.c index efc452e71ab..d805ffed892 100644 --- a/arch/powerpc/platforms/cell/spufs/hw_ops.c +++ b/arch/powerpc/platforms/cell/spufs/hw_ops.c @@ -147,7 +147,7 @@ static void spu_hw_signal1_write(struct spu_context *ctx, u32 data) static u32 spu_hw_signal2_read(struct spu_context *ctx) { - return in_be32(&ctx->spu->problem->signal_notify1); + return in_be32(&ctx->spu->problem->signal_notify2); } static void spu_hw_signal2_write(struct spu_context *ctx, u32 data) diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index cae3d13229b..49b8dabcbc9 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -477,8 +477,10 @@ static void __init chrp_find_8259(void) " address, polling\n"); i8259_init(pic, chrp_int_ack); - if (ppc_md.get_irq == NULL) + if (ppc_md.get_irq == NULL) { ppc_md.get_irq = i8259_irq; + irq_set_default_host(i8259_get_host()); + } if (chrp_mpic != NULL) { cascade_irq = irq_of_parse_and_map(pic, 0); if (cascade_irq == NO_IRQ) diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c index f4cbbcf8773..218817d13c5 100644 --- a/arch/powerpc/platforms/iseries/iommu.c +++ b/arch/powerpc/platforms/iseries/iommu.c @@ -43,9 +43,6 @@ static void tce_build_iSeries(struct iommu_table *tbl, long index, long npages, u64 rc; u64 tce, rpn; - index <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - while (npages--) { rpn = virt_to_abs(uaddr) >> TCE_SHIFT; tce = (rpn & TCE_RPN_MASK) << TCE_RPN_SHIFT; @@ -75,9 +72,6 @@ static void tce_free_iSeries(struct iommu_table *tbl, long index, long npages) { u64 rc; - npages <<= TCE_PAGE_FACTOR; - index <<= TCE_PAGE_FACTOR; - while (npages--) { rc = HvCallXm_setTce((u64)tbl->it_index, (u64)index, 0); if (rc) @@ -136,10 +130,9 @@ void iommu_table_getparms_iSeries(unsigned long busno, panic("PCI_DMA: parms->size is zero, parms is 0x%p", parms); /* itc_size is in pages worth of table, it_size is in # of entries */ - tbl->it_size = ((parms->itc_size * TCE_PAGE_SIZE) / - TCE_ENTRY_SIZE) >> TCE_PAGE_FACTOR; + tbl->it_size = (parms->itc_size * TCE_PAGE_SIZE) / TCE_ENTRY_SIZE; tbl->it_busno = parms->itc_busno; - tbl->it_offset = parms->itc_offset >> TCE_PAGE_FACTOR; + tbl->it_offset = parms->itc_offset; tbl->it_index = parms->itc_index; tbl->it_blocksize = 1; tbl->it_type = virtbus ? TCE_VB : TCE_PCI; diff --git a/arch/powerpc/platforms/iseries/setup.c b/arch/powerpc/platforms/iseries/setup.c index a0ff7ba7d66..6f73469fd3b 100644 --- a/arch/powerpc/platforms/iseries/setup.c +++ b/arch/powerpc/platforms/iseries/setup.c @@ -694,6 +694,11 @@ void * __init iSeries_early_setup(void) { unsigned long phys_mem_size; + /* Identify CPU type. This is done again by the common code later + * on but calling this function multiple times is fine. + */ + identify_cpu(0); + powerpc_firmware_features |= FW_FEATURE_ISERIES; powerpc_firmware_features |= FW_FEATURE_LPAR; diff --git a/arch/powerpc/platforms/powermac/sleep.S b/arch/powerpc/platforms/powermac/sleep.S index 1174ca128ef..adee28da353 100644 --- a/arch/powerpc/platforms/powermac/sleep.S +++ b/arch/powerpc/platforms/powermac/sleep.S @@ -45,7 +45,8 @@ .section .text .align 5 -#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) +#if defined(CONFIG_PM) || defined(CONFIG_CPU_FREQ_PMAC) || \ + (defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)) /* This gets called by via-pmu.c late during the sleep process. * The PMU was already send the sleep command and will shut us down diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index d24ba547e53..556c279a789 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -57,9 +57,6 @@ static void tce_build_pSeries(struct iommu_table *tbl, long index, u64 *tcep; u64 rpn; - index <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - proto_tce = TCE_PCI_READ; // Read allowed if (direction != DMA_TO_DEVICE) @@ -82,9 +79,6 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) { u64 *tcep; - npages <<= TCE_PAGE_FACTOR; - index <<= TCE_PAGE_FACTOR; - tcep = ((u64 *)tbl->it_base) + index; while (npages--) @@ -95,7 +89,6 @@ static unsigned long tce_get_pseries(struct iommu_table *tbl, long index) { u64 *tcep; - index <<= TCE_PAGE_FACTOR; tcep = ((u64 *)tbl->it_base) + index; return *tcep; @@ -109,9 +102,6 @@ static void tce_build_pSeriesLP(struct iommu_table *tbl, long tcenum, u64 proto_tce, tce; u64 rpn; - tcenum <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; proto_tce = TCE_PCI_READ; if (direction != DMA_TO_DEVICE) @@ -146,7 +136,7 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, u64 rpn; long l, limit; - if (TCE_PAGE_FACTOR == 0 && npages == 1) + if (npages == 1) return tce_build_pSeriesLP(tbl, tcenum, npages, uaddr, direction); @@ -164,9 +154,6 @@ static void tce_buildmulti_pSeriesLP(struct iommu_table *tbl, long tcenum, __get_cpu_var(tce_page) = tcep; } - tcenum <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - rpn = (virt_to_abs(uaddr)) >> TCE_SHIFT; proto_tce = TCE_PCI_READ; if (direction != DMA_TO_DEVICE) @@ -207,9 +194,6 @@ static void tce_free_pSeriesLP(struct iommu_table *tbl, long tcenum, long npages { u64 rc; - tcenum <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - while (npages--) { rc = plpar_tce_put((u64)tbl->it_index, (u64)tcenum << 12, 0); @@ -229,9 +213,6 @@ static void tce_freemulti_pSeriesLP(struct iommu_table *tbl, long tcenum, long n { u64 rc; - tcenum <<= TCE_PAGE_FACTOR; - npages <<= TCE_PAGE_FACTOR; - rc = plpar_tce_stuff((u64)tbl->it_index, (u64)tcenum << 12, 0, npages); if (rc && printk_ratelimit()) { @@ -248,7 +229,6 @@ static unsigned long tce_get_pSeriesLP(struct iommu_table *tbl, long tcenum) u64 rc; unsigned long tce_ret; - tcenum <<= TCE_PAGE_FACTOR; rc = plpar_tce_get((u64)tbl->it_index, (u64)tcenum << 12, &tce_ret); if (rc && printk_ratelimit()) { @@ -289,7 +269,7 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_busno = phb->bus->number; /* Units of tce entries */ - tbl->it_offset = phb->dma_window_base_cur >> PAGE_SHIFT; + tbl->it_offset = phb->dma_window_base_cur >> IOMMU_PAGE_SHIFT; /* Test if we are going over 2GB of DMA space */ if (phb->dma_window_base_cur + phb->dma_window_size > 0x80000000ul) { @@ -300,7 +280,7 @@ static void iommu_table_setparms(struct pci_controller *phb, phb->dma_window_base_cur += phb->dma_window_size; /* Set the tce table size - measured in entries */ - tbl->it_size = phb->dma_window_size >> PAGE_SHIFT; + tbl->it_size = phb->dma_window_size >> IOMMU_PAGE_SHIFT; tbl->it_index = 0; tbl->it_blocksize = 16; @@ -325,8 +305,8 @@ static void iommu_table_setparms_lpar(struct pci_controller *phb, tbl->it_base = 0; tbl->it_blocksize = 16; tbl->it_type = TCE_PCI; - tbl->it_offset = offset >> PAGE_SHIFT; - tbl->it_size = size >> PAGE_SHIFT; + tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; + tbl->it_size = size >> IOMMU_PAGE_SHIFT; } static void iommu_bus_setup_pSeries(struct pci_bus *bus) @@ -522,8 +502,6 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) const void *dma_window = NULL; struct pci_dn *pci; - DBG("iommu_dev_setup_pSeriesLP, dev %p (%s)\n", dev, pci_name(dev)); - /* dev setup for LPAR is a little tricky, since the device tree might * contain the dma-window properties per-device and not neccesarily * for the bus. So we need to search upwards in the tree until we @@ -532,6 +510,9 @@ static void iommu_dev_setup_pSeriesLP(struct pci_dev *dev) */ dn = pci_device_to_OF_node(dev); + DBG("iommu_dev_setup_pSeriesLP, dev %p (%s) %s\n", + dev, pci_name(dev), dn->full_name); + for (pdn = dn; pdn && PCI_DN(pdn) && !PCI_DN(pdn)->iommu_table; pdn = pdn->parent) { dma_window = get_property(pdn, "ibm,dma-window", NULL); diff --git a/arch/powerpc/sysdev/dart.h b/arch/powerpc/sysdev/dart.h index 1c8817c4835..ff202edb059 100644 --- a/arch/powerpc/sysdev/dart.h +++ b/arch/powerpc/sysdev/dart.h @@ -72,7 +72,6 @@ #define DART_PAGE_SHIFT 12 #define DART_PAGE_SIZE (1 << DART_PAGE_SHIFT) -#define DART_PAGE_FACTOR (PAGE_SHIFT - DART_PAGE_SHIFT) #endif /* _POWERPC_SYSDEV_DART_H */ diff --git a/arch/powerpc/sysdev/dart_iommu.c b/arch/powerpc/sysdev/dart_iommu.c index 03b4477dd7f..572b7846cc7 100644 --- a/arch/powerpc/sysdev/dart_iommu.c +++ b/arch/powerpc/sysdev/dart_iommu.c @@ -156,9 +156,6 @@ static void dart_build(struct iommu_table *tbl, long index, DBG("dart: build at: %lx, %lx, addr: %x\n", index, npages, uaddr); - index <<= DART_PAGE_FACTOR; - npages <<= DART_PAGE_FACTOR; - dp = ((unsigned int*)tbl->it_base) + index; /* On U3, all memory is contigous, so we can move this @@ -199,9 +196,6 @@ static void dart_free(struct iommu_table *tbl, long index, long npages) DBG("dart: free at: %lx, %lx\n", index, npages); - index <<= DART_PAGE_FACTOR; - npages <<= DART_PAGE_FACTOR; - dp = ((unsigned int *)tbl->it_base) + index; while (npages--) @@ -281,7 +275,7 @@ static void iommu_table_dart_setup(void) iommu_table_dart.it_busno = 0; iommu_table_dart.it_offset = 0; /* it_size is in number of entries */ - iommu_table_dart.it_size = (dart_tablesize / sizeof(u32)) >> DART_PAGE_FACTOR; + iommu_table_dart.it_size = dart_tablesize / sizeof(u32); /* Initialize the common IOMMU code */ iommu_table_dart.it_base = (unsigned long)dart_vbase; diff --git a/arch/powerpc/sysdev/i8259.c b/arch/powerpc/sysdev/i8259.c index 0450265d73b..ad87adc975b 100644 --- a/arch/powerpc/sysdev/i8259.c +++ b/arch/powerpc/sysdev/i8259.c @@ -224,6 +224,11 @@ static struct irq_host_ops i8259_host_ops = { .xlate = i8259_host_xlate, }; +struct irq_host *i8259_get_host(void) +{ + return i8259_host; +} + /** * i8259_init - Initialize the legacy controller * @node: device node of the legacy PIC (can be NULL, but then, it will match diff --git a/arch/powerpc/sysdev/ipic.c b/arch/powerpc/sysdev/ipic.c index bc4d4a7f965..746f78c1537 100644 --- a/arch/powerpc/sysdev/ipic.c +++ b/arch/powerpc/sysdev/ipic.c @@ -473,9 +473,9 @@ static int ipic_set_irq_type(unsigned int virq, unsigned int flow_type) desc->status |= flow_type & IRQ_TYPE_SENSE_MASK; if (flow_type & IRQ_TYPE_LEVEL_LOW) { desc->status |= IRQ_LEVEL; - set_irq_handler(virq, handle_level_irq); + desc->handle_irq = handle_level_irq; } else { - set_irq_handler(virq, handle_edge_irq); + desc->handle_irq = handle_edge_irq; } /* only EXT IRQ senses are programmable on ipic diff --git a/arch/powerpc/sysdev/qe_lib/qe.c b/arch/powerpc/sysdev/qe_lib/qe.c index 2bae632d3ad..e4223226a7a 100644 --- a/arch/powerpc/sysdev/qe_lib/qe.c +++ b/arch/powerpc/sysdev/qe_lib/qe.c @@ -122,8 +122,7 @@ int qe_issue_cmd(u32 cmd, u32 device, u8 mcn_protocol, u32 cmd_input) mcn_shift = QE_CR_MCN_NORMAL_SHIFT; } - out_be32(&qe_immr->cp.cecdr, - immrbar_virt_to_phys((void *)cmd_input)); + out_be32(&qe_immr->cp.cecdr, cmd_input); out_be32(&qe_immr->cp.cecr, (cmd | QE_CR_FLG | ((u32) device << dev_shift) | (u32) mcn_protocol << mcn_shift)); diff --git a/arch/powerpc/sysdev/qe_lib/ucc.c b/arch/powerpc/sysdev/qe_lib/ucc.c index 916c9e5df57..ac12a44d516 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc.c +++ b/arch/powerpc/sysdev/qe_lib/ucc.c @@ -207,6 +207,7 @@ int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) case QE_CLK18: source = 8; break; case QE_CLK7: source = 9; break; case QE_CLK8: source = 10; break; + case QE_CLK16: source = 11; break; default: source = -1; break; } break; @@ -222,6 +223,7 @@ int ucc_set_qe_mux_rxtx(int ucc_num, enum qe_clock clock, enum comm_dir mode) case QE_CLK22: source = 8; break; case QE_CLK7: source = 9; break; case QE_CLK8: source = 10; break; + case QE_CLK16: source = 11; break; default: source = -1; break; } break; diff --git a/arch/powerpc/sysdev/qe_lib/ucc_fast.c b/arch/powerpc/sysdev/qe_lib/ucc_fast.c index c2be7348fcb..75fa3104a43 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_fast.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_fast.c @@ -163,7 +163,7 @@ int ucc_fast_init(struct ucc_fast_info * uf_info, struct ucc_fast_private ** ucc /* check if the UCC port number is in range. */ if ((uf_info->ucc_num < 0) || (uf_info->ucc_num > UCC_MAX_NUM - 1)) { - uccf_err("ucc_fast_init: Illagal UCC number!"); + uccf_err("ucc_fast_init: Illegal UCC number!"); return -EINVAL; } diff --git a/arch/powerpc/sysdev/qe_lib/ucc_slow.c b/arch/powerpc/sysdev/qe_lib/ucc_slow.c index 1fb88ef7cf0..a49da6b73ec 100644 --- a/arch/powerpc/sysdev/qe_lib/ucc_slow.c +++ b/arch/powerpc/sysdev/qe_lib/ucc_slow.c @@ -152,7 +152,7 @@ int ucc_slow_init(struct ucc_slow_info * us_info, struct ucc_slow_private ** ucc /* check if the UCC port number is in range. */ if ((us_info->ucc_num < 0) || (us_info->ucc_num > UCC_MAX_NUM - 1)) { - uccs_err("ucc_slow_init: Illagal UCC number!"); + uccs_err("ucc_slow_init: Illegal UCC number!"); return -EINVAL; } diff --git a/arch/powerpc/sysdev/tsi108_dev.c b/arch/powerpc/sysdev/tsi108_dev.c index 11de090eb90..97f37ef4bbb 100644 --- a/arch/powerpc/sysdev/tsi108_dev.c +++ b/arch/powerpc/sysdev/tsi108_dev.c @@ -48,7 +48,7 @@ phys_addr_t get_csrbase(void) tsi = of_find_node_by_type(NULL, "tsi-bridge"); if (tsi) { unsigned int size; - void *prop = get_property(tsi, "reg", &size); + const void *prop = get_property(tsi, "reg", &size); tsi108_csr_base = of_translate_address(tsi, prop); of_node_put(tsi); }; @@ -79,7 +79,7 @@ static int __init tsi108_eth_of_init(void) hw_info tsi_eth_data; unsigned int *id; unsigned int *phy_id; - void *mac_addr; + const void *mac_addr; phandle *ph; memset(r, 0, sizeof(r)); diff --git a/arch/ppc/boot/simple/relocate.S b/arch/ppc/boot/simple/relocate.S index 0c021556d78..1bbbcd2f2bc 100644 --- a/arch/ppc/boot/simple/relocate.S +++ b/arch/ppc/boot/simple/relocate.S @@ -154,8 +154,8 @@ do_relocate_out: start_ldr: /* Clear all of BSS and set up stack for C calls */ - lis r3,edata@h - ori r3,r3,edata@l + lis r3,__bss_start@h + ori r3,r3,__bss_start@l lis r4,end@h ori r4,r4,end@l subi r3,r3,4 @@ -163,7 +163,7 @@ start_ldr: li r0,0 50: stwu r0,4(r3) cmpw cr0,r3,r4 - bne 50b + blt 50b 90: mr r9,r1 /* Save old stack pointer (in case it matters) */ lis r1,.stack@h ori r1,r1,.stack@l diff --git a/arch/ppc/kernel/misc.S b/arch/ppc/kernel/misc.S index 5f6684012de..d319f9ba237 100644 --- a/arch/ppc/kernel/misc.S +++ b/arch/ppc/kernel/misc.S @@ -110,80 +110,6 @@ _GLOBAL(reloc_got2) blr /* - * identify_cpu, - * called with r3 = data offset and r4 = CPU number - * doesn't change r3 - */ -_GLOBAL(identify_cpu) - addis r8,r3,cpu_specs@ha - addi r8,r8,cpu_specs@l - mfpvr r7 -1: - lwz r5,CPU_SPEC_PVR_MASK(r8) - and r5,r5,r7 - lwz r6,CPU_SPEC_PVR_VALUE(r8) - cmplw 0,r6,r5 - beq 1f - addi r8,r8,CPU_SPEC_ENTRY_SIZE - b 1b -1: - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - sub r8,r8,r3 - stw r8,0(r6) - blr - -/* - * do_cpu_ftr_fixups - goes through the list of CPU feature fixups - * and writes nop's over sections of code that don't apply for this cpu. - * r3 = data offset (not changed) - */ -_GLOBAL(do_cpu_ftr_fixups) - /* Get CPU 0 features */ - addis r6,r3,cur_cpu_spec@ha - addi r6,r6,cur_cpu_spec@l - lwz r4,0(r6) - add r4,r4,r3 - lwz r4,CPU_SPEC_FEATURES(r4) - - /* Get the fixup table */ - addis r6,r3,__start___ftr_fixup@ha - addi r6,r6,__start___ftr_fixup@l - addis r7,r3,__stop___ftr_fixup@ha - addi r7,r7,__stop___ftr_fixup@l - - /* Do the fixup */ -1: cmplw 0,r6,r7 - bgelr - addi r6,r6,16 - lwz r8,-16(r6) /* mask */ - and r8,r8,r4 - lwz r9,-12(r6) /* value */ - cmplw 0,r8,r9 - beq 1b - lwz r8,-8(r6) /* section begin */ - lwz r9,-4(r6) /* section end */ - subf. r9,r8,r9 - beq 1b - /* write nops over the section of code */ - /* todo: if large section, add a branch at the start of it */ - srwi r9,r9,2 - mtctr r9 - add r8,r8,r3 - lis r0,0x60000000@h /* nop */ -3: stw r0,0(r8) - andi. r10,r4,CPU_FTR_SPLIT_ID_CACHE@l - beq 2f - dcbst 0,r8 /* suboptimal, but simpler */ - sync - icbi 0,r8 -2: addi r8,r8,4 - bdnz 3b - sync /* additional sync needed on g4 */ - isync - b 1b - -/* * call_setup_cpu - call the setup_cpu function for this cpu * r3 = data offset, r24 = cpu number * diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c index 75fe13815be..27faeca2c7a 100644 --- a/arch/ppc/kernel/setup.c +++ b/arch/ppc/kernel/setup.c @@ -38,6 +38,7 @@ #include <asm/nvram.h> #include <asm/xmon.h> #include <asm/ocp.h> +#include <asm/prom.h> #define USES_PPC_SYS (defined(CONFIG_85xx) || defined(CONFIG_83xx) || \ defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \ @@ -53,8 +54,6 @@ extern void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7); -extern void identify_cpu(unsigned long offset, unsigned long cpu); -extern void do_cpu_ftr_fixups(unsigned long offset); extern void reloc_got2(unsigned long offset); extern void ppc6xx_idle(void); @@ -301,6 +300,7 @@ early_init(int r3, int r4, int r5) { unsigned long phys; unsigned long offset = reloc_offset(); + struct cpu_spec *spec; /* Default */ phys = offset + KERNELBASE; @@ -313,8 +313,10 @@ early_init(int r3, int r4, int r5) * Identify the CPU type and fix up code sections * that depend on which cpu we have. */ - identify_cpu(offset, 0); - do_cpu_ftr_fixups(offset); + spec = identify_cpu(offset); + do_feature_fixups(spec->cpu_features, + PTRRELOC(&__start___ftr_fixup), + PTRRELOC(&__stop___ftr_fixup)); return phys; } diff --git a/arch/ppc/kernel/time.c b/arch/ppc/kernel/time.c index d4b2cf74da6..18ee851e33e 100644 --- a/arch/ppc/kernel/time.c +++ b/arch/ppc/kernel/time.c @@ -62,6 +62,7 @@ #include <asm/cache.h> #include <asm/8xx_immap.h> #include <asm/machdep.h> +#include <asm/irq_regs.h> #include <asm/time.h> @@ -129,6 +130,7 @@ void wakeup_decrementer(void) */ void timer_interrupt(struct pt_regs * regs) { + struct pt_regs *old_regs; int next_dec; unsigned long cpu = smp_processor_id(); unsigned jiffy_stamp = last_jiffy_stamp(cpu); @@ -137,6 +139,7 @@ void timer_interrupt(struct pt_regs * regs) if (atomic_read(&ppc_n_lost_interrupts) != 0) do_IRQ(regs); + old_regs = set_irq_regs(regs); irq_enter(); while ((next_dec = tb_ticks_per_jiffy - tb_delta(&jiffy_stamp)) <= 0) { @@ -188,6 +191,7 @@ void timer_interrupt(struct pt_regs * regs) ppc_md.heartbeat(); irq_exit(); + set_irq_regs(old_regs); } /* diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index aafc8e8893d..9661a91183b 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -708,7 +708,7 @@ void single_step_exception(struct pt_regs *regs) void alignment_exception(struct pt_regs *regs) { - int fixed; + int sig, code, fixed = 0; fixed = fix_alignment(regs); if (fixed == 1) { @@ -717,14 +717,16 @@ void alignment_exception(struct pt_regs *regs) return; } if (fixed == -EFAULT) { - /* fixed == -EFAULT means the operand address was bad */ - if (user_mode(regs)) - _exception(SIGSEGV, regs, SEGV_ACCERR, regs->dar); - else - bad_page_fault(regs, regs->dar, SIGSEGV); - return; + sig = SIGSEGV; + code = SEGV_ACCERR; + } else { + sig = SIGBUS; + code = BUS_ADRALN; } - _exception(SIGBUS, regs, BUS_ADRALN, regs->dar); + if (user_mode(regs)) + _exception(sig, regs, code, regs->dar); + else + bad_page_fault(regs, regs->dar, sig); } void StackOverflow(struct pt_regs *regs) diff --git a/arch/ppc/kernel/vmlinux.lds.S b/arch/ppc/kernel/vmlinux.lds.S index 095fd332332..16e8661e1fe 100644 --- a/arch/ppc/kernel/vmlinux.lds.S +++ b/arch/ppc/kernel/vmlinux.lds.S @@ -115,13 +115,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; diff --git a/arch/ppc/mm/init.c b/arch/ppc/mm/init.c index 410200046af..c374e53ae03 100644 --- a/arch/ppc/mm/init.c +++ b/arch/ppc/mm/init.c @@ -374,11 +374,12 @@ void __init paging_init(void) end_pfn = start_pfn + (total_memory >> PAGE_SHIFT); add_active_range(0, start_pfn, end_pfn); + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); #ifdef CONFIG_HIGHMEM - max_zone_pfns[0] = total_lowmem >> PAGE_SHIFT; - max_zone_pfns[1] = total_memory >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = total_lowmem >> PAGE_SHIFT; + max_zone_pfns[ZONE_HIGHMEM] = total_memory >> PAGE_SHIFT; #else - max_zone_pfns[0] = total_memory >> PAGE_SHIFT; + max_zone_pfns[ZONE_DMA] = total_memory >> PAGE_SHIFT; #endif /* CONFIG_HIGHMEM */ free_area_init_nodes(max_zone_pfns); } diff --git a/arch/ppc/platforms/mpc8272ads_setup.c b/arch/ppc/platforms/mpc8272ads_setup.c index d7b3a6afa78..1f9ea36837b 100644 --- a/arch/ppc/platforms/mpc8272ads_setup.c +++ b/arch/ppc/platforms/mpc8272ads_setup.c @@ -196,7 +196,7 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev, bd_t* bi = (void*)__res; int fs_no = fsid_fcc1+pdev->id-1; - if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) { + if(fs_no >= ARRAY_SIZE(mpc82xx_enet_pdata)) { return; } @@ -222,7 +222,7 @@ static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev, int id = fs_uart_id_scc2fsid(idx); /* no need to alter anything if console */ - if ((id <= num) && (!pdev->dev.platform_data)) { + if ((id < num) && (!pdev->dev.platform_data)) { pinfo = &mpc8272_uart_pdata[id]; pinfo->uart_clk = bd->bi_intfreq; pdev->dev.platform_data = pinfo; diff --git a/arch/ppc/platforms/mpc866ads_setup.c b/arch/ppc/platforms/mpc866ads_setup.c index 5f130dca377..e95d2c11174 100644 --- a/arch/ppc/platforms/mpc866ads_setup.c +++ b/arch/ppc/platforms/mpc866ads_setup.c @@ -259,7 +259,7 @@ static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) /* Get pointer to Communication Processor */ cp = cpmp; - if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) { printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); return; } @@ -305,7 +305,7 @@ static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev, int id = fs_uart_id_smc2fsid(idx); /* no need to alter anything if console */ - if ((id <= num) && (!pdev->dev.platform_data)) { + if ((id < num) && (!pdev->dev.platform_data)) { pinfo = &mpc866_uart_pdata[id]; pinfo->uart_clk = bd->bi_intfreq; pdev->dev.platform_data = pinfo; diff --git a/arch/ppc/platforms/mpc885ads_setup.c b/arch/ppc/platforms/mpc885ads_setup.c index 02293141efb..f8161f3557f 100644 --- a/arch/ppc/platforms/mpc885ads_setup.c +++ b/arch/ppc/platforms/mpc885ads_setup.c @@ -263,7 +263,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no) char *e; int i; - if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) { + if(fs_no >= ARRAY_SIZE(mpc8xx_enet_pdata)) { printk(KERN_ERR"No network-suitable #%d device on bus", fs_no); return; } @@ -371,7 +371,7 @@ static void __init mpc885ads_fixup_uart_pdata(struct platform_device *pdev, int id = fs_uart_id_smc2fsid(idx); /* no need to alter anything if console */ - if ((id <= num) && (!pdev->dev.platform_data)) { + if ((id < num) && (!pdev->dev.platform_data)) { pinfo = &mpc885_uart_pdata[id]; pinfo->uart_clk = bd->bi_intfreq; pdev->dev.platform_data = pinfo; diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 608193cfe43..245b81bc715 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -236,9 +236,6 @@ config WARN_STACK_SIZE This allows you to specify the maximum frame size a function may have without the compiler complaining about it. -config ARCH_POPULATES_NODE_MAP - def_bool y - source "mm/Kconfig" comment "I/O subsystem configuration" diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 2b1e6c9a6e0..af1e8fc7d98 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -109,7 +109,7 @@ static LIST_HEAD(appldata_ops_list); * * schedule work and reschedule timer */ -static void appldata_timer_function(unsigned long data, struct pt_regs *regs) +static void appldata_timer_function(unsigned long data) { P_DEBUG(" -= Timer =-\n"); P_DEBUG("CPU: %i, expire_count: %i\n", smp_processor_id(), @@ -310,6 +310,7 @@ appldata_interval_handler(ctl_table *ctl, int write, struct file *filp, if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len)) { return -EFAULT; } + interval = 0; sscanf(buf, "%i", &interval); if (interval <= 0) { P_ERROR("Timer CPU interval has to be > 0!\n"); diff --git a/arch/s390/defconfig b/arch/s390/defconfig index a3257398ea8..7cd51e73e27 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Wed Oct 4 19:45:46 2006 +# Linux kernel version: 2.6.19-rc2 +# Wed Oct 18 17:11:10 2006 # CONFIG_MMU=y CONFIG_LOCKDEP_SUPPORT=y @@ -119,7 +119,6 @@ CONFIG_PACK_STACK=y CONFIG_CHECK_STACK=y CONFIG_STACK_GUARD=256 # CONFIG_WARN_STACK is not set -CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -211,6 +210,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -528,6 +528,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -646,10 +647,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # -# Distributed Lock Manager -# - -# # Instrumentation Support # @@ -669,7 +666,6 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_KERNEL=y CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHEDSTATS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y @@ -690,6 +686,7 @@ CONFIG_DEBUG_FS=y # CONFIG_FRAME_POINTER is not set # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y +CONFIG_HEADERS_CHECK=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set diff --git a/arch/s390/kernel/compat_linux.c b/arch/s390/kernel/compat_linux.c index e15e1489aef..5b33f823863 100644 --- a/arch/s390/kernel/compat_linux.c +++ b/arch/s390/kernel/compat_linux.c @@ -295,6 +295,7 @@ static inline long put_tv32(struct compat_timeval __user *o, struct timeval *i) * * This is really horribly ugly. */ +#ifdef CONFIG_SYSVIPC asmlinkage long sys32_ipc(u32 call, int first, int second, int third, u32 ptr) { if (call >> 16) /* hack for backward compatibility */ @@ -338,6 +339,7 @@ asmlinkage long sys32_ipc(u32 call, int first, int second, int third, u32 ptr) return -ENOSYS; } +#endif asmlinkage long sys32_truncate64(const char __user * path, unsigned long high, unsigned long low) { @@ -755,7 +757,9 @@ asmlinkage long sys32_sysctl(struct __sysctl_args32 __user *args) put_user(oldlen, (u32 __user *)compat_ptr(tmp.oldlenp))) error = -EFAULT; } - copy_to_user(args->__unused, tmp.__unused, sizeof(tmp.__unused)); + if (copy_to_user(args->__unused, tmp.__unused, + sizeof(tmp.__unused))) + error = -EFAULT; } return error; } diff --git a/arch/s390/kernel/compat_signal.c b/arch/s390/kernel/compat_signal.c index d49b876a83b..861888ab8c1 100644 --- a/arch/s390/kernel/compat_signal.c +++ b/arch/s390/kernel/compat_signal.c @@ -169,12 +169,12 @@ sys32_sigaction(int sig, const struct old_sigaction32 __user *act, compat_old_sigset_t mask; if (!access_ok(VERIFY_READ, act, sizeof(*act)) || __get_user(sa_handler, &act->sa_handler) || - __get_user(sa_restorer, &act->sa_restorer)) + __get_user(sa_restorer, &act->sa_restorer) || + __get_user(new_ka.sa.sa_flags, &act->sa_flags) || + __get_user(mask, &act->sa_mask)) return -EFAULT; new_ka.sa.sa_handler = (__sighandler_t) sa_handler; new_ka.sa.sa_restorer = (void (*)(void)) sa_restorer; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); siginitset(&new_ka.sa.sa_mask, mask); } @@ -185,10 +185,10 @@ sys32_sigaction(int sig, const struct old_sigaction32 __user *act, sa_restorer = (unsigned long) old_ka.sa.sa_restorer; if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || __put_user(sa_handler, &oact->sa_handler) || - __put_user(sa_restorer, &oact->sa_restorer)) + __put_user(sa_restorer, &oact->sa_restorer) || + __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); } return ret; diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index cb0efae6802..71e54ef0931 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1664,4 +1664,4 @@ sys_getcpu_wrapper: llgtr %r2,%r2 # unsigned * llgtr %r3,%r3 # unsigned * llgtr %r4,%r4 # struct getcpu_cache * - jg sys_tee + jg sys_getcpu diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c index c49ab8c784d..4faf96f8a83 100644 --- a/arch/s390/kernel/s390_ext.c +++ b/arch/s390/kernel/s390_ext.c @@ -117,8 +117,8 @@ void do_extint(struct pt_regs *regs, unsigned short code) int index; struct pt_regs *old_regs; - irq_enter(); old_regs = set_irq_regs(regs); + irq_enter(); asm volatile ("mc 0,0"); if (S390_lowcore.int_clock >= S390_lowcore.jiffy_timer) /** @@ -134,8 +134,8 @@ void do_extint(struct pt_regs *regs, unsigned short code) p->handler(code); } } - set_irq_regs(old_regs); irq_exit(); + set_irq_regs(old_regs); } EXPORT_SYMBOL(register_external_interrupt); diff --git a/arch/s390/kernel/s390_ksyms.c b/arch/s390/kernel/s390_ksyms.c index 9f19e833a56..90b5ef529eb 100644 --- a/arch/s390/kernel/s390_ksyms.c +++ b/arch/s390/kernel/s390_ksyms.c @@ -51,4 +51,3 @@ EXPORT_SYMBOL(csum_fold); EXPORT_SYMBOL(console_mode); EXPORT_SYMBOL(console_devno); EXPORT_SYMBOL(console_irq); -EXPORT_SYMBOL(sys_wait4); diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 49f2b68e32b..2aa13e8e000 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -70,6 +70,7 @@ struct { #define CHUNK_READ_WRITE 0 #define CHUNK_READ_ONLY 1 volatile int __cpu_logical_map[NR_CPUS]; /* logical cpu to cpu address */ +unsigned long __initdata zholes_size[MAX_NR_ZONES]; static unsigned long __initdata memory_end; /* @@ -357,6 +358,21 @@ void machine_power_off(void) */ void (*pm_power_off)(void) = machine_power_off; +static void __init +add_memory_hole(unsigned long start, unsigned long end) +{ + unsigned long dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT; + + if (end <= dma_pfn) + zholes_size[ZONE_DMA] += end - start + 1; + else if (start > dma_pfn) + zholes_size[ZONE_NORMAL] += end - start + 1; + else { + zholes_size[ZONE_DMA] += dma_pfn - start + 1; + zholes_size[ZONE_NORMAL] += end - dma_pfn; + } +} + static int __init early_parse_mem(char *p) { memory_end = memparse(p, &p); @@ -434,7 +450,7 @@ setup_lowcore(void) lc->extended_save_area_addr = (__u32) __alloc_bootmem(PAGE_SIZE, PAGE_SIZE, 0); /* enable extended save area */ - ctl_set_bit(14, 29); + __ctl_set_bit(14, 29); } #endif set_prefix((u32)(unsigned long) lc); @@ -478,6 +494,7 @@ setup_memory(void) { unsigned long bootmap_size; unsigned long start_pfn, end_pfn, init_pfn; + unsigned long last_rw_end; int i; /* @@ -533,27 +550,39 @@ setup_memory(void) /* * Register RAM areas with the bootmem allocator. */ + last_rw_end = start_pfn; for (i = 0; i < MEMORY_CHUNKS && memory_chunk[i].size > 0; i++) { - unsigned long start_chunk, end_chunk, pfn; + unsigned long start_chunk, end_chunk; if (memory_chunk[i].type != CHUNK_READ_WRITE) continue; - start_chunk = PFN_DOWN(memory_chunk[i].addr); - end_chunk = start_chunk + PFN_DOWN(memory_chunk[i].size) - 1; - end_chunk = min(end_chunk, end_pfn); - if (start_chunk >= end_chunk) - continue; - add_active_range(0, start_chunk, end_chunk); - pfn = max(start_chunk, start_pfn); - for (; pfn <= end_chunk; pfn++) - page_set_storage_key(PFN_PHYS(pfn), PAGE_DEFAULT_KEY); + start_chunk = (memory_chunk[i].addr + PAGE_SIZE - 1); + start_chunk >>= PAGE_SHIFT; + end_chunk = (memory_chunk[i].addr + memory_chunk[i].size); + end_chunk >>= PAGE_SHIFT; + if (start_chunk < start_pfn) + start_chunk = start_pfn; + if (end_chunk > end_pfn) + end_chunk = end_pfn; + if (start_chunk < end_chunk) { + /* Initialize storage key for RAM pages */ + for (init_pfn = start_chunk ; init_pfn < end_chunk; + init_pfn++) + page_set_storage_key(init_pfn << PAGE_SHIFT, + PAGE_DEFAULT_KEY); + free_bootmem(start_chunk << PAGE_SHIFT, + (end_chunk - start_chunk) << PAGE_SHIFT); + if (last_rw_end < start_chunk) + add_memory_hole(last_rw_end, start_chunk - 1); + last_rw_end = end_chunk; + } } psw_set_key(PAGE_DEFAULT_KEY); - free_bootmem_with_active_regions(0, max_pfn); - reserve_bootmem(0, PFN_PHYS(start_pfn)); + if (last_rw_end < end_pfn - 1) + add_memory_hole(last_rw_end, end_pfn - 1); /* * Reserve the bootmem bitmap itself as well. We do this in two diff --git a/arch/s390/kernel/signal.c b/arch/s390/kernel/signal.c index 4392a77cbae..4c8a7954ef4 100644 --- a/arch/s390/kernel/signal.c +++ b/arch/s390/kernel/signal.c @@ -80,10 +80,10 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, old_sigset_t mask; if (!access_ok(VERIFY_READ, act, sizeof(*act)) || __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + __get_user(new_ka.sa.sa_restorer, &act->sa_restorer) || + __get_user(new_ka.sa.sa_flags, &act->sa_flags) || + __get_user(mask, &act->sa_mask)) return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); siginitset(&new_ka.sa.sa_mask, mask); } @@ -92,10 +92,10 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, if (!ret && oact) { if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer) || + __put_user(old_ka.sa.sa_flags, &oact->sa_flags) || + __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask)) return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); } return ret; diff --git a/arch/s390/kernel/stacktrace.c b/arch/s390/kernel/stacktrace.c index d9428a0fc8f..0d14a4789bf 100644 --- a/arch/s390/kernel/stacktrace.c +++ b/arch/s390/kernel/stacktrace.c @@ -62,27 +62,26 @@ static inline unsigned long save_context_stack(struct stack_trace *trace, void save_stack_trace(struct stack_trace *trace, struct task_struct *task) { register unsigned long sp asm ("15"); - unsigned long orig_sp; + unsigned long orig_sp, new_sp; - sp &= PSW_ADDR_INSN; - orig_sp = sp; + orig_sp = sp & PSW_ADDR_INSN; - sp = save_context_stack(trace, &trace->skip, sp, + new_sp = save_context_stack(trace, &trace->skip, orig_sp, S390_lowcore.panic_stack - PAGE_SIZE, S390_lowcore.panic_stack); - if ((sp != orig_sp) && !trace->all_contexts) + if ((new_sp != orig_sp) && !trace->all_contexts) return; - sp = save_context_stack(trace, &trace->skip, sp, + new_sp = save_context_stack(trace, &trace->skip, new_sp, S390_lowcore.async_stack - ASYNC_SIZE, S390_lowcore.async_stack); - if ((sp != orig_sp) && !trace->all_contexts) + if ((new_sp != orig_sp) && !trace->all_contexts) return; if (task) - save_context_stack(trace, &trace->skip, sp, + save_context_stack(trace, &trace->skip, new_sp, (unsigned long) task_stack_page(task), (unsigned long) task_stack_page(task) + THREAD_SIZE); else - save_context_stack(trace, &trace->skip, sp, + save_context_stack(trace, &trace->skip, new_sp, S390_lowcore.thread_info, S390_lowcore.thread_info + THREAD_SIZE); return; diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index e59baec5652..a4ceae3dbcf 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -320,3 +320,4 @@ SYSCALL(sys_tee,sys_tee,sys_tee_wrapper) SYSCALL(sys_vmsplice,sys_vmsplice,compat_sys_vmsplice_wrapper) NI_SYSCALL /* 310 sys_move_pages */ SYSCALL(sys_getcpu,sys_getcpu,sys_getcpu_wrapper) +SYSCALL(sys_epoll_pwait,sys_epoll_pwait,sys_ni_syscall) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index 66375a5e3d1..92ecffbc8d8 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -462,7 +462,8 @@ asmlinkage void illegal_op(struct pt_regs * regs, long interruption_code) local_irq_enable(); if (regs->psw.mask & PSW_MASK_PSTATE) { - get_user(*((__u16 *) opcode), (__u16 __user *) location); + if (get_user(*((__u16 *) opcode), (__u16 __user *) location)) + return; if (*((__u16 *) opcode) == S390_BREAKPOINT_U16) { if (current->ptrace & PT_PTRACED) force_sig(SIGTRAP, current); @@ -470,20 +471,25 @@ asmlinkage void illegal_op(struct pt_regs * regs, long interruption_code) signal = SIGILL; #ifdef CONFIG_MATHEMU } else if (opcode[0] == 0xb3) { - get_user(*((__u16 *) (opcode+2)), location+1); + if (get_user(*((__u16 *) (opcode+2)), location+1)) + return; signal = math_emu_b3(opcode, regs); } else if (opcode[0] == 0xed) { - get_user(*((__u32 *) (opcode+2)), - (__u32 __user *)(location+1)); + if (get_user(*((__u32 *) (opcode+2)), + (__u32 __user *)(location+1))) + return; signal = math_emu_ed(opcode, regs); } else if (*((__u16 *) opcode) == 0xb299) { - get_user(*((__u16 *) (opcode+2)), location+1); + if (get_user(*((__u16 *) (opcode+2)), location+1)) + return; signal = math_emu_srnm(opcode, regs); } else if (*((__u16 *) opcode) == 0xb29c) { - get_user(*((__u16 *) (opcode+2)), location+1); + if (get_user(*((__u16 *) (opcode+2)), location+1)) + return; signal = math_emu_stfpc(opcode, regs); } else if (*((__u16 *) opcode) == 0xb29d) { - get_user(*((__u16 *) (opcode+2)), location+1); + if (get_user(*((__u16 *) (opcode+2)), location+1)) + return; signal = math_emu_lfpc(opcode, regs); #endif } else diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index af9e69a0301..fe0f2e97ba7 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -83,13 +83,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 1d7d3938b2b..21baaf5496d 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -209,11 +209,11 @@ static void list_add_sorted(struct vtimer_list *timer, struct list_head *head) * Do the callback functions of expired vtimer events. * Called from within the interrupt handler. */ -static void do_callbacks(struct list_head *cb_list, struct pt_regs *regs) +static void do_callbacks(struct list_head *cb_list) { struct vtimer_queue *vt_list; struct vtimer_list *event, *tmp; - void (*fn)(unsigned long, struct pt_regs*); + void (*fn)(unsigned long); unsigned long data; if (list_empty(cb_list)) @@ -224,7 +224,7 @@ static void do_callbacks(struct list_head *cb_list, struct pt_regs *regs) list_for_each_entry_safe(event, tmp, cb_list, entry) { fn = event->function; data = event->data; - fn(data, regs); + fn(data); if (!event->interval) /* delete one shot timer */ @@ -275,7 +275,7 @@ static void do_cpu_timer_interrupt(__u16 error_code) list_move_tail(&event->entry, &cb_list); } spin_unlock(&vt_list->lock); - do_callbacks(&cb_list, get_irq_regs()); + do_callbacks(&cb_list); /* next event is first in list */ spin_lock(&vt_list->lock); diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index d9989171870..e1881c31b1c 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -84,6 +84,7 @@ void show_mem(void) printk("%d pages swap cached\n",cached); } +extern unsigned long __initdata zholes_size[]; /* * paging_init() sets up the page tables */ @@ -100,15 +101,16 @@ void __init paging_init(void) unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE; static const int ssm_mask = 0x04000000L; unsigned long ro_start_pfn, ro_end_pfn; - unsigned long max_zone_pfns[MAX_NR_ZONES]; + unsigned long zones_size[MAX_NR_ZONES]; ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata); ro_end_pfn = PFN_UP((unsigned long)&__end_rodata); - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - max_zone_pfns[ZONE_DMA] = max_low_pfn; - max_zone_pfns[ZONE_NORMAL] = max_low_pfn; - free_area_init_nodes(max_zone_pfns); + memset(zones_size, 0, sizeof(zones_size)); + zones_size[ZONE_DMA] = max_low_pfn; + free_area_init_node(0, &contig_page_data, zones_size, + __pa(PAGE_OFFSET) >> PAGE_SHIFT, + zholes_size); /* unmap whole virtual address space */ @@ -168,16 +170,26 @@ void __init paging_init(void) unsigned long pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERN_REGION_TABLE; static const int ssm_mask = 0x04000000L; + unsigned long zones_size[MAX_NR_ZONES]; + unsigned long dma_pfn, high_pfn; unsigned long ro_start_pfn, ro_end_pfn; - unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(zones_size, 0, sizeof(zones_size)); + dma_pfn = MAX_DMA_ADDRESS >> PAGE_SHIFT; + high_pfn = max_low_pfn; ro_start_pfn = PFN_DOWN((unsigned long)&__start_rodata); ro_end_pfn = PFN_UP((unsigned long)&__end_rodata); - memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); - max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS); - max_zone_pfns[ZONE_NORMAL] = max_low_pfn; - free_area_init_nodes(max_zone_pfns); + if (dma_pfn > high_pfn) + zones_size[ZONE_DMA] = high_pfn; + else { + zones_size[ZONE_DMA] = dma_pfn; + zones_size[ZONE_NORMAL] = high_pfn - dma_pfn; + } + + /* Initialize mem_map[]. */ + free_area_init_node(0, &contig_page_data, zones_size, + __pa(PAGE_OFFSET) >> PAGE_SHIFT, zholes_size); /* * map whole physical memory to virtual memory (identity mapping) diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f6a0c443616..6a461d4caef 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -45,6 +45,9 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_IOMAP bool +config GENERIC_TIME + def_bool n + config ARCH_MAY_HAVE_PC_FDC bool @@ -357,6 +360,7 @@ config CPU_HAS_SR_RB endmenu menu "Timer support" +depends on !GENERIC_TIME config SH_TMU bool "TMU timer support" diff --git a/arch/sh/boards/hp6xx/hp6xx_apm.c b/arch/sh/boards/hp6xx/hp6xx_apm.c index 75f91aaae07..d146cdaa0b8 100644 --- a/arch/sh/boards/hp6xx/hp6xx_apm.c +++ b/arch/sh/boards/hp6xx/hp6xx_apm.c @@ -14,7 +14,7 @@ #include <asm/io.h> #include <asm/apm.h> #include <asm/adc.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #define SH7709_PGDR 0xa400012c @@ -83,7 +83,7 @@ static int hp6x0_apm_get_info(char *buf, char **start, off_t fpos, int length) return p - buf; } -static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hp6x0_apm_interrupt(int irq, void *dev) { if (!apm_suspended) apm_queue_event(APM_USER_SUSPEND); @@ -96,7 +96,7 @@ static int __init hp6x0_apm_init(void) int ret; ret = request_irq(HP680_BTN_IRQ, hp6x0_apm_interrupt, - SA_INTERRUPT, MODNAME, 0); + IRQF_DISABLED, MODNAME, 0); if (unlikely(ret < 0)) { printk(KERN_ERR MODNAME ": IRQ %d request failed\n", HP680_BTN_IRQ); diff --git a/arch/sh/boards/hp6xx/pm.c b/arch/sh/boards/hp6xx/pm.c index 83d32721206..d1947732fb3 100644 --- a/arch/sh/boards/hp6xx/pm.c +++ b/arch/sh/boards/hp6xx/pm.c @@ -12,7 +12,7 @@ #include <linux/time.h> #include <asm/io.h> #include <asm/hd64461.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #include <asm/cpu/dac.h> #include <asm/pm.h> diff --git a/arch/sh/boards/hp6xx/setup.c b/arch/sh/boards/hp6xx/setup.c index 2d3a5b4faf5..b5a96649ed2 100644 --- a/arch/sh/boards/hp6xx/setup.c +++ b/arch/sh/boards/hp6xx/setup.c @@ -13,7 +13,7 @@ #include <asm/hd64461.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/hp6xx/hp6xx.h> +#include <asm/hp6xx.h> #include <asm/cpu/dac.h> #define SCPCR 0xa4000116 diff --git a/arch/sh/boards/landisk/landisk_pwb.c b/arch/sh/boards/landisk/landisk_pwb.c index 0b7bee1a9ca..e6252497816 100644 --- a/arch/sh/boards/landisk/landisk_pwb.c +++ b/arch/sh/boards/landisk/landisk_pwb.c @@ -135,7 +135,7 @@ static int swdrv_write(struct file *filp, const char *buff, size_t count, return count; } -static irqreturn_t sw_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t sw_interrupt(int irq, void *dev_id) { landisk_btn = (0x0ff & (~ctrl_inb(PA_STATUS))); disable_irq(IRQ_BUTTON); diff --git a/arch/sh/boards/mpc1211/setup.c b/arch/sh/boards/mpc1211/setup.c index 01c10fa5c05..7c3d1d30415 100644 --- a/arch/sh/boards/mpc1211/setup.c +++ b/arch/sh/boards/mpc1211/setup.c @@ -69,7 +69,6 @@ static void __init pci_write_config(unsigned long busNo, static unsigned char m_irq_mask = 0xfb; static unsigned char s_irq_mask = 0xff; -volatile unsigned long irq_err_count; static void disable_mpc1211_irq(unsigned int irq) { @@ -118,7 +117,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) if(irq < 8) { if(m_irq_mask & (1<<irq)){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count) printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { @@ -131,7 +130,7 @@ static void mask_and_ack_mpc1211(unsigned int irq) } else { if(s_irq_mask & (1<<(irq - 8))){ if(!mpc1211_irq_real(irq)){ - irq_err_count++; + atomic_inc(&irq_err_count); printk("spurious 8259A interrupt: IRQ %x\n",irq); } } else { diff --git a/arch/sh/boards/renesas/hs7751rvoip/io.c b/arch/sh/boards/renesas/hs7751rvoip/io.c index 51f3f657421..bb9aa0d6285 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/io.c +++ b/arch/sh/boards/renesas/hs7751rvoip/io.c @@ -15,7 +15,7 @@ #include <linux/module.h> #include <linux/pci.h> #include <asm/io.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/hs7751rvoip.h> #include <asm/addrspace.h> extern void *area6_io8_base; /* Area 6 8bit I/O Base address */ diff --git a/arch/sh/boards/renesas/hs7751rvoip/irq.c b/arch/sh/boards/renesas/hs7751rvoip/irq.c index c617b188258..943f93aa605 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/irq.c +++ b/arch/sh/boards/renesas/hs7751rvoip/irq.c @@ -14,7 +14,7 @@ #include <linux/irq.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> +#include <asm/hs7751rvoip.h> static int mask_pos[] = {8, 9, 10, 11, 12, 13, 0, 1, 2, 3, 4, 5, 6, 7}; diff --git a/arch/sh/boards/renesas/hs7751rvoip/setup.c b/arch/sh/boards/renesas/hs7751rvoip/setup.c index 0414c15c345..f7d0e304d89 100644 --- a/arch/sh/boards/renesas/hs7751rvoip/setup.c +++ b/arch/sh/boards/renesas/hs7751rvoip/setup.c @@ -10,22 +10,21 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/mm.h> -#include <linux/vmalloc.h> -#include <linux/hdreg.h> -#include <linux/ide.h> #include <linux/pm.h> +#include <asm/hs7751rvoip.h> #include <asm/io.h> -#include <asm/hs7751rvoip/hs7751rvoip.h> #include <asm/machvec.h> -#include <asm/rtc.h> -#include <asm/irq.h> -static void __init hs7751rvoip_init_irq(void) -{ +static struct ipr_data hs77501rvoip_ipr_map[] = { #if defined(CONFIG_HS7751RVOIP_CODEC) - make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, #endif +}; + +static void __init hs7751rvoip_init_irq(void) +{ + make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map)); init_hs7751rvoip_IRQ(); } diff --git a/arch/sh/boards/renesas/r7780rp/io.c b/arch/sh/boards/renesas/r7780rp/io.c index db92d6e6ae9..311ccccba71 100644 --- a/arch/sh/boards/renesas/r7780rp/io.c +++ b/arch/sh/boards/renesas/r7780rp/io.c @@ -11,7 +11,7 @@ #include <linux/pci.h> #include <linux/kernel.h> #include <linux/types.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/addrspace.h> #include <asm/io.h> diff --git a/arch/sh/boards/renesas/r7780rp/irq.c b/arch/sh/boards/renesas/r7780rp/irq.c index 2d960e9a314..aa15ec5bc69 100644 --- a/arch/sh/boards/renesas/r7780rp/irq.c +++ b/arch/sh/boards/renesas/r7780rp/irq.c @@ -1,18 +1,17 @@ /* - * linux/arch/sh/boards/renesas/r7780rp/irq.c - * - * Copyright (C) 2000 Kazumoto Kojima - * * Renesas Solutions Highlander R7780RP-1 Support. * - * Modified for R7780RP-1 by - * Atom Create Engineering Co., Ltd. 2002. + * Copyright (C) 2002 Atom Create Engineering Co., Ltd. + * Copyright (C) 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ #include <linux/init.h> #include <linux/irq.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/r7780rp/r7780rp.h> +#include <linux/io.h> +#include <asm/r7780rp.h> #ifdef CONFIG_SH_R7780MP static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; @@ -20,71 +19,26 @@ static int mask_pos[] = {12, 11, 9, 14, 15, 8, 13, 6, 5, 4, 3, 2, 0, 0, 1, 0}; static int mask_pos[] = {15, 14, 13, 12, 11, 10, 9, 8, 7, 5, 6, 4, 0, 1, 2, 0}; #endif -static void enable_r7780rp_irq(unsigned int irq); -static void disable_r7780rp_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_r7780rp_irq disable_r7780rp_irq - -static void ack_r7780rp_irq(unsigned int irq); -static void end_r7780rp_irq(unsigned int irq); - -static unsigned int startup_r7780rp_irq(unsigned int irq) -{ - enable_r7780rp_irq(irq); - return 0; /* never anything pending */ -} - -static void disable_r7780rp_irq(unsigned int irq) -{ - unsigned short val; - unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]); - - /* Set the priority in IPR to 0 */ - val = ctrl_inw(IRLCNTR1); - val &= mask; - ctrl_outw(val, IRLCNTR1); -} - static void enable_r7780rp_irq(unsigned int irq) { - unsigned short val; - unsigned short value = (0x0001 << mask_pos[irq]); - /* Set priority in IPR back to original value */ - val = ctrl_inw(IRLCNTR1); - val |= value; - ctrl_outw(val, IRLCNTR1); -} - -static void ack_r7780rp_irq(unsigned int irq) -{ - disable_r7780rp_irq(irq); + ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1); } -static void end_r7780rp_irq(unsigned int irq) +static void disable_r7780rp_irq(unsigned int irq) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_r7780rp_irq(irq); + /* Set the priority in IPR to 0 */ + ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])), + IRLCNTR1); } -static struct hw_interrupt_type r7780rp_irq_type = { - .typename = "R7780RP-IRQ", - .startup = startup_r7780rp_irq, - .shutdown = shutdown_r7780rp_irq, - .enable = enable_r7780rp_irq, - .disable = disable_r7780rp_irq, - .ack = ack_r7780rp_irq, - .end = end_r7780rp_irq, +static struct irq_chip r7780rp_irq_chip __read_mostly = { + .name = "R7780RP", + .mask = disable_r7780rp_irq, + .unmask = enable_r7780rp_irq, + .mask_ack = disable_r7780rp_irq, }; -static void make_r7780rp_irq(unsigned int irq) -{ - disable_irq_nosync(irq); - irq_desc[irq].chip = &r7780rp_irq_type; - disable_r7780rp_irq(irq); -} - /* * Initialize IRQ setting */ @@ -92,24 +46,10 @@ void __init init_r7780rp_IRQ(void) { int i; - /* IRL0=PCI Slot #A - * IRL1=PCI Slot #B - * IRL2=PCI Slot #C - * IRL3=PCI Slot #D - * IRL4=CF Card - * IRL5=CF Card Insert - * IRL6=M66596 - * IRL7=SD Card - * IRL8=Touch Panel - * IRL9=SCI - * IRL10=Serial - * IRL11=Extention #A - * IRL11=Extention #B - * IRL12=Debug LAN - * IRL13=Push Switch - * IRL14=ZiggBee IO - */ - - for (i=0; i<15; i++) - make_r7780rp_irq(i); + for (i = 0; i < 15; i++) { + disable_irq_nosync(i); + set_irq_chip_and_handler_name(i, &r7780rp_irq_chip, + handle_level_irq, "level"); + enable_r7780rp_irq(i); + } } diff --git a/arch/sh/boards/renesas/r7780rp/setup.c b/arch/sh/boards/renesas/r7780rp/setup.c index b941aa0aa34..c331caeb694 100644 --- a/arch/sh/boards/renesas/r7780rp/setup.c +++ b/arch/sh/boards/renesas/r7780rp/setup.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <asm/machvec.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/clock.h> #include <asm/io.h> diff --git a/arch/sh/boards/renesas/rts7751r2d/io.c b/arch/sh/boards/renesas/rts7751r2d/io.c index 135aa0b5e62..f2507a80497 100644 --- a/arch/sh/boards/renesas/rts7751r2d/io.c +++ b/arch/sh/boards/renesas/rts7751r2d/io.c @@ -11,8 +11,8 @@ #include <linux/kernel.h> #include <linux/types.h> #include <linux/pci.h> -#include <asm/rts7751r2d/rts7751r2d.h> -#include <asm/io.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #include <asm/addrspace.h> /* diff --git a/arch/sh/boards/renesas/rts7751r2d/irq.c b/arch/sh/boards/renesas/rts7751r2d/irq.c index c915e7a3693..cb0eb20d1b4 100644 --- a/arch/sh/boards/renesas/rts7751r2d/irq.c +++ b/arch/sh/boards/renesas/rts7751r2d/irq.c @@ -8,12 +8,10 @@ * Modified for RTS7751R2D by * Atom Create Engineering Co., Ltd. 2002. */ - #include <linux/init.h> #include <linux/irq.h> -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/rts7751r2d/rts7751r2d.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #if defined(CONFIG_RTS7751R2D_REV11) static int mask_pos[] = {11, 9, 8, 12, 10, 6, 5, 4, 7, 14, 13, 0, 0, 0, 0}; diff --git a/arch/sh/boards/renesas/rts7751r2d/led.c b/arch/sh/boards/renesas/rts7751r2d/led.c index a7ce66c1e4f..509f548bdce 100644 --- a/arch/sh/boards/renesas/rts7751r2d/led.c +++ b/arch/sh/boards/renesas/rts7751r2d/led.c @@ -8,13 +8,9 @@ * * This file contains Renesas Technology Sales RTS7751R2D specific LED code. */ - -#include <asm/io.h> -#include <asm/rts7751r2d/rts7751r2d.h> - -#ifdef CONFIG_HEARTBEAT - +#include <linux/io.h> #include <linux/sched.h> +#include <asm/rts7751r2d.h> /* Cycle the LED's in the clasic Knightriger/Sun pattern */ void heartbeat_rts7751r2d(void) @@ -46,10 +42,3 @@ void heartbeat_rts7751r2d(void) else bit--; } -#endif /* CONFIG_HEARTBEAT */ - -void rts7751r2d_led(unsigned short value) -{ - ctrl_outw(value, PA_OUTPORT); -} - diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 20597a6e670..5c042d35ec9 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -12,9 +12,9 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/pm.h> -#include <asm/io.h> #include <asm/machvec.h> #include <asm/mach/rts7751r2d.h> +#include <asm/io.h> #include <asm/voyagergx.h> extern void heartbeat_rts7751r2d(void); diff --git a/arch/sh/boards/renesas/sh7710voipgw/setup.c b/arch/sh/boards/renesas/sh7710voipgw/setup.c index e57e7afab8c..180810b1210 100644 --- a/arch/sh/boards/renesas/sh7710voipgw/setup.c +++ b/arch/sh/boards/renesas/sh7710voipgw/setup.c @@ -13,6 +13,51 @@ #include <asm/io.h> #include <asm/irq.h> +static struct ipr_data sh7710voipgw_ipr_map[] = { + { TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY }, + { WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY }, + + /* SCIF0 */ + { SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + + /* DMAC-1 */ + { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + + /* DMAC-2 */ + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + + /* IPSEC */ + { IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY }, + + /* EDMAC */ + { EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY }, + { EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY }, + { EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY }, + + /* SIOF0 */ + { SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + + /* SIOF1 */ + { SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + { SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY }, + + /* SLIC IRQ's */ + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, + { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -37,65 +82,7 @@ static void __init sh7710voipgw_init_irq(void) */ ctrl_outw(0x2aa, INTC_ICR1); - /* Now make IPR interrupts */ - make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR, - TIMER2_IPR_POS, TIMER2_PRIORITY); - make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY); - - /* SCIF0 */ - make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, - SCIF0_PRIORITY); - - /* DMAC-1 */ - make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - - /* DMAC-2 */ - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - - /* IPSEC */ - make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY); - - /* EDMAC */ - make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, - EDMAC0_PRIORITY); - make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, - EDMAC1_PRIORITY); - make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, - EDMAC2_PRIORITY); - - /* SIOF0 */ - make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, - SIOF0_PRIORITY); - - /* SIOF1 */ - make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, - SIOF1_PRIORITY); - - /* SLIC IRQ's */ - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); + make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map)); } /* diff --git a/arch/sh/boards/se/7300/irq.c b/arch/sh/boards/se/7300/irq.c index ad1034f98a2..1279d776d60 100644 --- a/arch/sh/boards/se/7300/irq.c +++ b/arch/sh/boards/se/7300/irq.c @@ -13,6 +13,17 @@ #include <asm/io.h> #include <asm/se7300.h> +static struct ipr_data se7300_ipr_map[] = { + /* PC_IRQ[0-3] -> IRQ0 (32) */ + { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ }, + /* A_IRQ[0-3] -> IRQ1 (33) */ + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ }, + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -23,14 +34,7 @@ init_7300se_IRQ(void) ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ - /* PC_IRQ[0-3] -> IRQ0 (32) */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ); - /* A_IRQ[0-3] -> IRQ1 (33) */ - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map)); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/73180/irq.c b/arch/sh/boards/se/73180/irq.c index 2c62b8ea350..e7200c56bb4 100644 --- a/arch/sh/boards/se/73180/irq.c +++ b/arch/sh/boards/se/73180/irq.c @@ -87,13 +87,38 @@ shmse_irq_demux(int irq) return irq; } +static struct ipr_data se73180_siof0_ipr_map[] = { + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, +}; +static struct ipr_data se73180_vpu_ipr_map[] = { + { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, +}; +static struct ipr_data se73180_other_ipr_map[] = { + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, + + /* VIO interrupt */ + { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + + { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, +}; + /* * Initialize IRQ setting */ void __init init_73180se_IRQ(void) { - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(se73180_siof0_ipr_map, ARRAY_SIZE(se73180_siof0_ipr_map)); ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */ @@ -101,27 +126,11 @@ init_73180se_IRQ(void) ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */ make_intreq_irq(10); - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + make_ipr_irq(se73180_vpu_ipr_map, ARRAY_SIZE(se73180_vpu_ipr_map)); ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + make_ipr_irq(se73180_other_ipr_map, ARRAY_SIZE(se73180_other_ipr_map)); - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/7343/irq.c b/arch/sh/boards/se/7343/irq.c index 288b62f5941..360153ecc55 100644 --- a/arch/sh/boards/se/7343/irq.c +++ b/arch/sh/boards/se/7343/irq.c @@ -102,6 +102,51 @@ shmse_irq_demux(int irq) static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", NULL, NULL}; +static struct ipr_data se7343_irq5_ipr_map[] = { + { IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY }, +}; +static struct ipr_data se7343_siof0_vpu_ipr_map[] = { + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + { VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 }, +}; +static struct ipr_data se7343_other_ipr_map[] = { + { DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + { DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY }, + + /* I2C block */ + { IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + { IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY }, + + { IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + { IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY }, + + /* SIOF */ + { SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY }, + + /* SIU */ + { SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY }, + + /* VIO interrupt */ + { CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + { VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, + + /*MFI interrupt*/ + + { MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY }, + + /* LCD controller */ + { LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY }, +}; + /* * Initialize IRQ setting */ @@ -138,54 +183,17 @@ init_7343se_IRQ(void) /* Setup all external interrupts to be active low */ ctrl_outw(0xaaaa, INTC_ICR1); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); + make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map)); + setup_irq(IRQ5_IRQ, &irq5); /* Set port control to use IRQ5 */ *(u16 *)0xA4050108 &= ~0xc; - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); - make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); + make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map)); ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ - make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY); - - /* I2C block */ - make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, - IIC0_PRIORITY); - make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY); - - make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, - IIC1_PRIORITY); - make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY); - - /* SIOF */ - make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); + make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map)); - /* SIU */ - make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY); - - /* VIO interrupt */ - make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); - - /*MFI interrupt*/ - - make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY); - - /* LCD controller */ - make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY); ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ } diff --git a/arch/sh/boards/se/770x/irq.c b/arch/sh/boards/se/770x/irq.c index cff6700bbaf..fcd7cd7fa05 100644 --- a/arch/sh/boards/se/770x/irq.c +++ b/arch/sh/boards/se/770x/irq.c @@ -13,6 +13,48 @@ #include <asm/io.h> #include <asm/se.h> +static struct ipr_data se770x_ipr_map[] = { +#if defined(CONFIG_CPU_SUBTYPE_SH7705) + /* This is default value */ + { 0xf-0x2, BCR_ILCRA, 2, 0x2 }, + { 0xf-0xa, BCR_ILCRA, 1, 0xa }, + { 0xf-0x5, BCR_ILCRB, 0, 0x5 }, + { 0xf-0x8, BCR_ILCRC, 1, 0x8 }, + { 0xf-0xc, BCR_ILCRC, 0, 0xc }, + { 0xf-0xe, BCR_ILCRD, 3, 0xe }, + { 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */ + { 0xf-0xd, BCR_ILCRE, 2, 0xd }, + { 0xf-0x9, BCR_ILCRE, 1, 0x9 }, + { 0xf-0x1, BCR_ILCRE, 0, 0x1 }, + { 0xf-0xf, BCR_ILCRF, 3, 0xf }, + { 0xf-0xb, BCR_ILCRF, 1, 0xb }, + { 0xf-0x7, BCR_ILCRG, 3, 0x7 }, + { 0xf-0x6, BCR_ILCRG, 2, 0x6 }, + { 0xf-0x4, BCR_ILCRG, 1, 0x4 }, +#else + { 14, BCR_ILCRA, 2, 0x0f-14 }, + { 12, BCR_ILCRA, 1, 0x0f-12 }, + { 8, BCR_ILCRB, 1, 0x0f- 8 }, + { 6, BCR_ILCRC, 3, 0x0f- 6 }, + { 5, BCR_ILCRC, 2, 0x0f- 5 }, + { 4, BCR_ILCRC, 1, 0x0f- 4 }, + { 3, BCR_ILCRC, 0, 0x0f- 3 }, + { 1, BCR_ILCRD, 3, 0x0f- 1 }, + + { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ + + { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ + { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ + { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ + { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ + { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ +#endif +}; + /* * Initialize IRQ setting */ @@ -38,42 +80,6 @@ void __init init_se_IRQ(void) ctrl_outw(0, BCR_ILCRE); ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRG); - /* This is default value */ - make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2); - make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa); - make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5); - make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8); - make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc); - make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe); - make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */ - make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd); - make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9); - make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1); - make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf); - make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb); - make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7); - make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6); - make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4); -#else - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ #endif + make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map)); } diff --git a/arch/sh/boards/se/7751/irq.c b/arch/sh/boards/se/7751/irq.c index c607b0a4847..e4c63a48296 100644 --- a/arch/sh/boards/se/7751/irq.c +++ b/arch/sh/boards/se/7751/irq.c @@ -14,53 +14,50 @@ #include <asm/irq.h> #include <asm/se7751.h> -/* - * Initialize IRQ setting - */ -void __init init_7751se_IRQ(void) -{ - +static struct ipr_data se7751_ipr_map[] = { /* Leave old Solution Engine code in for reference. */ #if defined(CONFIG_SH_SOLUTION_ENGINE) - /* - * Super I/O (Just mimic PC): - * 1: keyboard - * 3: serial 0 - * 4: serial 1 - * 5: printer - * 6: floppy - * 8: rtc - * 12: mouse - * 14: ide0 - */ - make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); - make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); - make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); - make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); - make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); - make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); - make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); - make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); - - make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ - - make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ - make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ - make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ - make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ - - /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ - /* NOTE: #2 and #13 are not used on PC */ - make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ - make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ - + /* + * Super I/O (Just mimic PC): + * 1: keyboard + * 3: serial 0 + * 4: serial 1 + * 5: printer + * 6: floppy + * 8: rtc + * 12: mouse + * 14: ide0 + */ + { 14, BCR_ILCRA, 2, 0x0f-14 }, + { 12, BCR_ILCRA, 1, 0x0f-12 }, + { 8, BCR_ILCRB, 1, 0x0f- 8 }, + { 6, BCR_ILCRC, 3, 0x0f- 6 }, + { 5, BCR_ILCRC, 2, 0x0f- 5 }, + { 4, BCR_ILCRC, 1, 0x0f- 4 }, + { 3, BCR_ILCRC, 0, 0x0f- 3 }, + { 1, BCR_ILCRD, 3, 0x0f- 1 }, + + { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */ + + { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */ + { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */ + { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */ + { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */ + + /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ + /* NOTE: #2 and #13 are not used on PC */ + { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */ + { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */ #elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) - - make_ipr_irq(13, BCR_ILCRD, 3, 2); - - /* Add additional calls to make_ipr_irq() as drivers are added - * and tested. - */ + { 13, BCR_ILCRD, 3, 2 }, + /* Add additional entries here as drivers are added and tested. */ #endif +}; +/* + * Initialize IRQ setting + */ +void __init init_7751se_IRQ(void) +{ + make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map)); } diff --git a/arch/sh/boards/sh03/setup.c b/arch/sh/boards/sh03/setup.c index 137e2ba9243..5ad1e19771b 100644 --- a/arch/sh/boards/sh03/setup.c +++ b/arch/sh/boards/sh03/setup.c @@ -14,14 +14,17 @@ #include <asm/sh03/sh03.h> #include <asm/addrspace.h> +static struct ipr_data sh03_ipr_map[] = { + { IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, + { IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, + { IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, + { IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + static void __init init_sh03_IRQ(void) { ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); + make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map)); } extern void *cf_io_base; diff --git a/arch/sh/boards/shmin/setup.c b/arch/sh/boards/shmin/setup.c index 2f0c19706cf..a31a1d1e268 100644 --- a/arch/sh/boards/shmin/setup.c +++ b/arch/sh/boards/shmin/setup.c @@ -7,7 +7,7 @@ */ #include <linux/init.h> #include <asm/machvec.h> -#include <asm/shmin/shmin.h> +#include <asm/shmin.h> #include <asm/clock.h> #include <asm/irq.h> #include <asm/io.h> diff --git a/arch/sh/boards/snapgear/setup.c b/arch/sh/boards/snapgear/setup.c index f5e98c56b53..650fb364594 100644 --- a/arch/sh/boards/snapgear/setup.c +++ b/arch/sh/boards/snapgear/setup.c @@ -33,7 +33,7 @@ extern void pcibios_init(void); * EraseConfig handling functions */ -static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t eraseconfig_interrupt(int irq, void *dev_id) { volatile char dummy __attribute__((unused)) = * (volatile char *) 0xb8000000; @@ -68,6 +68,13 @@ module_init(eraseconfig_init); * IRL3 = crypto */ +static struct ipr_data snapgear_ipr_map[] = { + make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); + make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); + make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); + make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); +}; + static void __init init_snapgear_IRQ(void) { /* enable individual interrupt mode for externals */ @@ -75,10 +82,7 @@ static void __init init_snapgear_IRQ(void) printk("Setup SnapGear IRQ/IPR ...\n"); - make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); - make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); - make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); - make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); + make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map)); } /* diff --git a/arch/sh/boards/titan/setup.c b/arch/sh/boards/titan/setup.c index 52b66d8b8d2..a6046d93758 100644 --- a/arch/sh/boards/titan/setup.c +++ b/arch/sh/boards/titan/setup.c @@ -9,15 +9,19 @@ extern void __init pcibios_init_platform(void); +static struct ipr_data titan_ipr_map[] = { + { TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY }, + { TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY }, + { TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY }, + { TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY }, +}; + static void __init init_titan_irq(void) { /* enable individual interrupt mode for externals */ ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); - make_ipr_irq( TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */ - make_ipr_irq( TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */ - make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */ - make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */ + make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map)); } struct sh_machine_vector mv_titan __initmv = { diff --git a/arch/sh/cchips/hd6446x/hd64461/setup.c b/arch/sh/cchips/hd6446x/hd64461/setup.c index 38f1e8171a3..4d49b5cbcc1 100644 --- a/arch/sh/cchips/hd6446x/hd64461/setup.c +++ b/arch/sh/cchips/hd6446x/hd64461/setup.c @@ -71,7 +71,7 @@ static struct hw_interrupt_type hd64461_irq_type = { .end = end_hd64461_irq, }; -static irqreturn_t hd64461_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64461_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64461: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/hd6446x/hd64465/gpio.c b/arch/sh/cchips/hd6446x/hd64465/gpio.c index 72320d02d69..43431855ec8 100644 --- a/arch/sh/cchips/hd6446x/hd64465/gpio.c +++ b/arch/sh/cchips/hd6446x/hd64465/gpio.c @@ -85,7 +85,7 @@ static struct { void *dev; } handlers[GPIO_NPORTS * 8]; -static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev, struct pt_regs *regs) +static irqreturn_t hd64465_gpio_interrupt(int irq, void *dev) { unsigned short port, pin, isr, mask, portpin; diff --git a/arch/sh/cchips/hd6446x/hd64465/setup.c b/arch/sh/cchips/hd6446x/hd64465/setup.c index 30573d3e196..d126e1f30de 100644 --- a/arch/sh/cchips/hd6446x/hd64465/setup.c +++ b/arch/sh/cchips/hd6446x/hd64465/setup.c @@ -84,7 +84,7 @@ static struct hw_interrupt_type hd64465_irq_type = { }; -static irqreturn_t hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t hd64465_interrupt(int irq, void *dev_id) { printk(KERN_INFO "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n", diff --git a/arch/sh/cchips/voyagergx/irq.c b/arch/sh/cchips/voyagergx/irq.c index 392c8b12ce3..f7ea700d05a 100644 --- a/arch/sh/cchips/voyagergx/irq.c +++ b/arch/sh/cchips/voyagergx/irq.c @@ -17,29 +17,18 @@ Copyright 2003 (c) Lineo uSolutions,Inc. */ -/* -------------------------------------------------------------------- */ - -#undef DEBUG - -#include <linux/sched.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/param.h> -#include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/init.h> -#include <linux/irq.h> - -#include <asm/io.h> -#include <asm/irq.h> +#include <linux/io.h> #include <asm/voyagergx.h> +#include <asm/rts7751r2d.h> static void disable_voyagergx_irq(unsigned int irq) { unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); val = inl(VOYAGER_INT_MASK); val &= ~mask; outl(val, VOYAGER_INT_MASK); @@ -50,7 +39,7 @@ static void enable_voyagergx_irq(unsigned int irq) unsigned long val; unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE); - pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask); + pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask); val = inl(VOYAGER_INT_MASK); val |= mask; outl(val, VOYAGER_INT_MASK); @@ -88,8 +77,7 @@ static struct hw_interrupt_type voyagergx_irq_type = { .end = end_voyagergx_irq, }; -static irqreturn_t voyagergx_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t voyagergx_interrupt(int irq, void *dev_id) { printk(KERN_INFO "VoyagerGX: spurious interrupt, status: 0x%x\n", @@ -138,7 +126,7 @@ int voyagergx_irq_demux(int irq) } else { printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val); } - pr_debug("voyagergx_irq_demux %d \n", i); + pr_debug("voyagergx_irq_demux %ld\n", i); #else for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++) if (val & bit) @@ -186,4 +174,3 @@ void __init setup_voyagergx_irq(void) setup_irq(IRQ_VOYAGER, &irq0); } - diff --git a/arch/sh/configs/r7780rp_defconfig b/arch/sh/configs/r7780rp_defconfig index 2470364948e..34e2046c321 100644 --- a/arch/sh/configs/r7780rp_defconfig +++ b/arch/sh/configs/r7780rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 11:32:47 2006 +# Linux kernel version: 2.6.19-rc3 +# Tue Oct 31 12:32:06 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -178,7 +179,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 -CONFIG_32BIT=y +# CONFIG_32BIT is not set CONFIG_VSYSCALL=y CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -229,9 +230,7 @@ CONFIG_SH_PCLK_FREQ=32000000 # # DMA support # -CONFIG_SH_DMA=y -CONFIG_NR_ONCHIP_DMA_CHANNELS=6 -# CONFIG_NR_DMA_CHANNELS_BOOL is not set +# CONFIG_SH_DMA is not set # # Companion Chips @@ -259,7 +258,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1" +CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/sda1" # # Bus options @@ -336,6 +335,7 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -441,76 +441,28 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # -CONFIG_IDE=m -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=m - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -CONFIG_BLK_DEV_IDE_SATA=y -CONFIG_BLK_DEV_IDEDISK=m -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -CONFIG_BLK_DEV_IDESCSI=m -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=m -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -CONFIG_BLK_DEV_GENERIC=m -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_BLK_DEV_AEC62XX=m -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -# CONFIG_BLK_DEV_CMD64X is not set -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -CONFIG_BLK_DEV_PDC202XX_NEW=m -# CONFIG_BLK_DEV_SVWKS is not set -CONFIG_BLK_DEV_SIIMAGE=m -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set +# CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=m +CONFIG_SCSI=y # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # # SCSI support type (disk, tape, CD-ROM) # -CONFIG_BLK_DEV_SD=m +CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set @@ -561,6 +513,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -570,7 +523,55 @@ CONFIG_CHR_DEV_SG=m # # Serial ATA (prod) and Parallel ATA (experimental) drivers # -# CONFIG_ATA is not set +CONFIG_ATA=y +# CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SVW is not set +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +CONFIG_SATA_SIL=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set # # Multi-device support (RAID and LVM) @@ -840,7 +841,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -856,6 +856,7 @@ CONFIG_HW_RANDOM=y # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -868,14 +869,9 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -959,7 +955,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=y +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -984,6 +1002,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -991,6 +1010,7 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_MINIX_FS=y # CONFIG_ROMFS_FS is not set @@ -1027,7 +1047,8 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_RAMFS=y @@ -1159,6 +1180,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_LIST is not set CONFIG_FRAME_POINTER=y CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1178,9 +1200,9 @@ CONFIG_FORCED_INLINING=y # CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_MD4 is not set @@ -1191,7 +1213,7 @@ CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m +CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_TWOFISH is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 5e817546113..41049cf14b7 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:59:14 2006 +# Linux kernel version: 2.6.19-rc3 +# Mon Oct 30 18:04:49 2006 # CONFIG_SUPERH=y CONFIG_RWSEM_GENERIC_SPINLOCK=y @@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -23,7 +24,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 # General setup # CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y +# CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_IPC_NS is not set @@ -236,8 +237,8 @@ CONFIG_HZ_250=y CONFIG_HZ=250 # CONFIG_KEXEC is not set # CONFIG_SMP is not set -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # @@ -247,7 +248,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x009e0000 # CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf" +CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw" # # Bus options @@ -334,6 +335,7 @@ CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set @@ -355,9 +357,10 @@ CONFIG_INET6_XFRM_TUNNEL=y CONFIG_INET6_TUNNEL=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y +CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=y -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -714,6 +717,12 @@ CONFIG_BLK_DEV_INITRD=y CONFIG_ATA_OVER_ETH=m # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # # CONFIG_IDE is not set @@ -778,9 +787,9 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set @@ -1095,7 +1104,6 @@ CONFIG_HW_RANDOM=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -1124,14 +1132,9 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y # # Digital Video Broadcasting Devices @@ -1177,9 +1180,9 @@ CONFIG_USB_DEVICEFS=y # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN is not set @@ -1235,7 +1238,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1246,11 +1248,20 @@ CONFIG_USB_STORAGE=y # # USB Network Adapters # -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m CONFIG_USB_MON=y # @@ -1285,6 +1296,7 @@ CONFIG_USB_SERIAL_ARK3116=m # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m @@ -1316,6 +1328,7 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1357,7 +1370,26 @@ CONFIG_USB_SERIAL_PL2303=m # # Real Time Clock # -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=m +CONFIG_RTC_CLASS=m + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=m +CONFIG_RTC_INTF_PROC=m +CONFIG_RTC_INTF_DEV=m +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set + +# +# RTC drivers +# +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_M48T86 is not set +CONFIG_RTC_DRV_SH=m +# CONFIG_RTC_DRV_TEST is not set +# CONFIG_RTC_DRV_V3020 is not set # # DMA Engine support @@ -1380,8 +1412,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4DEV_FS=m +# CONFIG_EXT4DEV_FS_XATTR is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set @@ -1393,9 +1429,10 @@ CONFIG_XFS_FS=m # CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_ROMFS_FS=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set @@ -1480,7 +1517,12 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set +CONFIG_CIFS=m +# CONFIG_CIFS_STATS is not set +CONFIG_CIFS_WEAK_PW_HASH=y +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set @@ -1583,9 +1625,10 @@ CONFIG_LOG_BUF_SHIFT=16 # CONFIG_DEBUG_LIST is not set # CONFIG_FRAME_POINTER is not set # CONFIG_FORCED_INLINING is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1605,7 +1648,7 @@ CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_MD4=m @@ -1615,7 +1658,7 @@ CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_ECB=m +CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_BLOWFISH=m diff --git a/arch/sh/drivers/dma/dma-g2.c b/arch/sh/drivers/dma/dma-g2.c index 9cb07092418..0caf11bb7e2 100644 --- a/arch/sh/drivers/dma/dma-g2.c +++ b/arch/sh/drivers/dma/dma-g2.c @@ -51,7 +51,7 @@ static volatile struct g2_dma_info *g2_dma = (volatile struct g2_dma_info *)0xa0 ((g2_dma->channel[i].size - \ g2_dma->status[i].size) & 0x0fffffff) -static irqreturn_t g2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t g2_dma_interrupt(int irq, void *dev_id) { int i; diff --git a/arch/sh/drivers/dma/dma-pvr2.c b/arch/sh/drivers/dma/dma-pvr2.c index c1b6bc23c10..838fad566ea 100644 --- a/arch/sh/drivers/dma/dma-pvr2.c +++ b/arch/sh/drivers/dma/dma-pvr2.c @@ -21,7 +21,7 @@ static unsigned int xfer_complete; static int count; -static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t pvr2_dma_interrupt(int irq, void *dev_id) { if (get_dma_residue(PVR2_CASCADE_CHAN)) { printk(KERN_WARNING "DMA: SH DMAC did not complete transfer " diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index cbbe8bce3d6..66078601335 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -19,23 +19,34 @@ #include <asm/io.h> #include "dma-sh.h" -static inline unsigned int get_dmte_irq(unsigned int chan) -{ - unsigned int irq = 0; + +#ifdef CONFIG_CPU_SH4 +static struct ipr_data dmae_ipr_map[] = { + { DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, +}; +#endif +static struct ipr_data dmte_ipr_map[] = { /* * Normally we could just do DMTE0_IRQ + chan outright, though in the * case of the 7751R, the DMTE IRQs for channels > 4 start right above * the SCIF */ - if (chan < 4) { - irq = DMTE0_IRQ + chan; - } else { -#ifdef DMTE4_IRQ - irq = DMTE4_IRQ + chan - 4; -#endif - } + { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, + { DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY }, +}; +static inline unsigned int get_dmte_irq(unsigned int chan) +{ + unsigned int irq = 0; + if (chan < ARRAY_SIZE(dmte_ipr_map)) + irq = dmte_ipr_map[chan].irq; return irq; } @@ -60,9 +71,9 @@ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) * Besides that it needs to waken any waiting process, which should handle * setting up the next transfer. */ -static irqreturn_t dma_tei(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_tei(int irq, void *dev_id) { - struct dma_channel *chan = (struct dma_channel *)dev_id; + struct dma_channel *chan = dev_id; u32 chcr; chcr = ctrl_inl(CHCR[chan->chan]); @@ -228,7 +239,7 @@ static inline int dmaor_reset(void) } #if defined(CONFIG_CPU_SH4) -static irqreturn_t dma_err(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t dma_err(int irq, void *dummy) { dmaor_reset(); disable_irq(irq); @@ -258,17 +269,16 @@ static int __init sh_dmac_init(void) int i; #ifdef CONFIG_CPU_SH4 - make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); + make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map)); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); if (unlikely(i < 0)) return i; #endif - for (i = 0; i < info->nr_channels; i++) { - int irq = get_dmte_irq(i); - - make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); - } + i = info->nr_channels; + if (i > ARRAY_SIZE(dmte_ipr_map)) + i = ARRAY_SIZE(dmte_ipr_map); + make_ipr_irq(dmte_ipr_map, i); /* * Initialize DMAOR, and clean up any error flags that may have diff --git a/arch/sh/drivers/pci/ops-r7780rp.c b/arch/sh/drivers/pci/ops-r7780rp.c index 6e3ba9c65b4..eeea1577e11 100644 --- a/arch/sh/drivers/pci/ops-r7780rp.c +++ b/arch/sh/drivers/pci/ops-r7780rp.c @@ -13,7 +13,7 @@ #include <linux/init.h> #include <linux/delay.h> #include <linux/pci.h> -#include <asm/r7780rp/r7780rp.h> +#include <asm/r7780rp.h> #include <asm/io.h> #include "pci-sh4.h" diff --git a/arch/sh/drivers/pci/ops-rts7751r2d.c b/arch/sh/drivers/pci/ops-rts7751r2d.c index b68824c8b81..4a518d94804 100644 --- a/arch/sh/drivers/pci/ops-rts7751r2d.c +++ b/arch/sh/drivers/pci/ops-rts7751r2d.c @@ -10,28 +10,24 @@ * * PCI initialization for the Renesas SH7751R RTS7751R2D board */ - #include <linux/kernel.h> #include <linux/types.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/pci.h> -#include <linux/module.h> -#include <asm/rts7751r2d/rts7751r2d.h> -#include <asm/io.h> +#include <linux/io.h> +#include <asm/rts7751r2d.h> #include "pci-sh4.h" +static u8 rts7751r2d_irq_tab[] __initdata = { + IRQ_PCISLOT1, + IRQ_PCISLOT2, + IRQ_PCMCIA, + IRQ_PCIETH, +}; + int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin) { - switch (slot) { - case 0: return IRQ_PCISLOT1; /* PCI Extend slot #1 */ - case 1: return IRQ_PCISLOT2; /* PCI Extend slot #2 */ - case 2: return IRQ_PCMCIA; /* PCI Cardbus Bridge */ - case 3: return IRQ_PCIETH; /* Realtek Ethernet controller */ - default: - printk("PCI: Bad IRQ mapping request for slot %d\n", slot); - return -1; - } + return rts7751r2d_irq_tab[slot]; } static struct resource sh7751_io_resource = { diff --git a/arch/sh/drivers/pci/pci-sh7751.c b/arch/sh/drivers/pci/pci-sh7751.c index dbe83788498..85e1ee2e2e7 100644 --- a/arch/sh/drivers/pci/pci-sh7751.c +++ b/arch/sh/drivers/pci/pci-sh7751.c @@ -155,7 +155,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ pr_debug("PCI: Mapping IO address 0x%x - 0x%x to base 0x%x\n", PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO); /* * XXX: For now, leave this board-specific. In the event we have other @@ -163,7 +163,7 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map) */ #ifdef CONFIG_SH_BIGSUR bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10), - SH4_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); + SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0); #endif /* Make sure the MSB's of IO window are set to access PCI space diff --git a/arch/sh/drivers/pci/pci-st40.c b/arch/sh/drivers/pci/pci-st40.c index 4ab5ea6b35f..efecb3d5995 100644 --- a/arch/sh/drivers/pci/pci-st40.c +++ b/arch/sh/drivers/pci/pci-st40.c @@ -161,7 +161,7 @@ static char * pci_commands[16]={ "Memory Write-and-Invalidate" }; -static irqreturn_t st40_pci_irq(int irq, void *dev_instance, struct pt_regs *regs) +static irqreturn_t st40_pci_irq(int irq, void *dev_instance) { unsigned pci_int, pci_air, pci_cir, pci_aint; static int count=0; diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c index e30e4b7aa70..74ca576a7ce 100644 --- a/arch/sh/kernel/cpu/irq/intc2.c +++ b/arch/sh/kernel/cpu/irq/intc2.c @@ -10,93 +10,31 @@ * These are the "new Hitachi style" interrupts, as present on the * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780. */ - #include <linux/kernel.h> -#include <linux/init.h> #include <linux/irq.h> +#include <linux/io.h> #include <asm/system.h> -#include <asm/io.h> -#include <asm/machvec.h> - -struct intc2_data { - unsigned char msk_offset; - unsigned char msk_shift; - - int (*clear_irq) (int); -}; - -static struct intc2_data intc2_data[NR_INTC2_IRQS]; - -static void enable_intc2_irq(unsigned int irq); -static void disable_intc2_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_intc2_irq disable_intc2_irq - -static void mask_and_ack_intc2(unsigned int); -static void end_intc2_irq(unsigned int irq); - -static unsigned int startup_intc2_irq(unsigned int irq) -{ - enable_intc2_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type intc2_irq_type = { - .typename = "INTC2-IRQ", - .startup = startup_intc2_irq, - .shutdown = shutdown_intc2_irq, - .enable = enable_intc2_irq, - .disable = disable_intc2_irq, - .ack = mask_and_ack_intc2, - .end = end_intc2_irq -}; static void disable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSK_OFFSET + p->msk_offset); } static void enable_intc2_irq(unsigned int irq) { - int irq_offset = irq - INTC2_FIRST_IRQ; - int msk_shift, msk_offset; - - /* Sanity check */ - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - msk_shift = intc2_data[irq_offset].msk_shift; - msk_offset = intc2_data[irq_offset].msk_offset; - - ctrl_outl(1 << msk_shift, - INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset); + struct intc2_data *p = get_irq_chip_data(irq); + ctrl_outl(1 << p->msk_shift, + INTC2_BASE + INTC2_INTMSKCLR_OFFSET + p->msk_offset); } -static void mask_and_ack_intc2(unsigned int irq) -{ - disable_intc2_irq(irq); -} - -static void end_intc2_irq(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) - enable_intc2_irq(irq); - - if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq)) - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq); -} +static struct irq_chip intc2_irq_chip = { + .name = "INTC2", + .mask = disable_intc2_irq, + .unmask = enable_intc2_irq, + .mask_ack = disable_intc2_irq, +}; /* * Setup an INTC2 style interrupt. @@ -106,179 +44,36 @@ static void end_intc2_irq(unsigned int irq) * PIO1 which is INTPRI00[19,16] and INTMSK00[13] * would be: ^ ^ ^ ^ * | | | | - * make_intc2_irq(84, 0, 16, 0, 13); + * { 84, 0, 16, 0, 13 }, + * + * in the intc2_data table. */ -void make_intc2_irq(unsigned int irq, - unsigned int ipr_offset, unsigned int ipr_shift, - unsigned int msk_offset, unsigned int msk_shift, - unsigned int priority) +void make_intc2_irq(struct intc2_data *table, unsigned int nr_irqs) { - int irq_offset = irq - INTC2_FIRST_IRQ; - unsigned int flags; - unsigned long ipr; - - if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS)) - return; - - disable_irq_nosync(irq); - - /* Fill the data we need */ - intc2_data[irq_offset].msk_offset = msk_offset; - intc2_data[irq_offset].msk_shift = msk_shift; - intc2_data[irq_offset].clear_irq = NULL; - - /* Set the priority level */ - local_irq_save(flags); - - ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); - ipr &= ~(0xf << ipr_shift); - ipr |= priority << ipr_shift; - ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset); - - local_irq_restore(flags); + int i; - irq_desc[irq].chip = &intc2_irq_type; + for (i = 0; i < nr_irqs; i++) { + unsigned long ipr, flags; + struct intc2_data *p = table + i; - disable_intc2_irq(irq); -} + disable_irq_nosync(p->irq); -static struct intc2_init { - unsigned short irq; - unsigned char ipr_offset, ipr_shift; - unsigned char msk_offset, msk_shift; - unsigned char priority; -} intc2_init_data[] __initdata = { -#if defined(CONFIG_CPU_SUBTYPE_ST40) - {64, 0, 0, 0, 0, 13}, /* PCI serr */ - {65, 0, 4, 0, 1, 13}, /* PCI err */ - {66, 0, 4, 0, 2, 13}, /* PCI ad */ - {67, 0, 4, 0, 3, 13}, /* PCI pwd down */ - {72, 0, 8, 0, 5, 13}, /* DMAC INT0 */ - {73, 0, 8, 0, 6, 13}, /* DMAC INT1 */ - {74, 0, 8, 0, 7, 13}, /* DMAC INT2 */ - {75, 0, 8, 0, 8, 13}, /* DMAC INT3 */ - {76, 0, 8, 0, 9, 13}, /* DMAC INT4 */ - {78, 0, 8, 0, 11, 13}, /* DMAC ERR */ - {80, 0, 12, 0, 12, 13}, /* PIO0 */ - {84, 0, 16, 0, 13, 13}, /* PIO1 */ - {88, 0, 20, 0, 14, 13}, /* PIO2 */ - {112, 4, 0, 4, 0, 13}, /* Mailbox */ - #ifdef CONFIG_CPU_SUBTYPE_ST40GX1 - {116, 4, 4, 4, 4, 13}, /* SSC0 */ - {120, 4, 8, 4, 8, 13}, /* IR Blaster */ - {124, 4, 12, 4, 12, 13}, /* USB host */ - {128, 4, 16, 4, 16, 13}, /* Video processor BLITTER */ - {132, 4, 20, 4, 20, 13}, /* UART0 */ - {134, 4, 20, 4, 22, 13}, /* UART2 */ - {136, 4, 24, 4, 24, 13}, /* IO_PIO0 */ - {140, 4, 28, 4, 28, 13}, /* EMPI */ - {144, 8, 0, 8, 0, 13}, /* MAFE */ - {148, 8, 4, 8, 4, 13}, /* PWM */ - {152, 8, 8, 8, 8, 13}, /* SSC1 */ - {156, 8, 12, 8, 12, 13}, /* IO_PIO1 */ - {160, 8, 16, 8, 16, 13}, /* USB target */ - {164, 8, 20, 8, 20, 13}, /* UART1 */ - {168, 8, 24, 8, 24, 13}, /* Teletext */ - {172, 8, 28, 8, 28, 13}, /* VideoSync VTG */ - {173, 8, 28, 8, 29, 13}, /* VideoSync DVP0 */ - {174, 8, 28, 8, 30, 13}, /* VideoSync DVP1 */ -#endif -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) -/* - * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 - */ - /* INTPRIO0 | INTMSK0 */ - {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ - {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ - {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ - {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ - /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ - /* INTPRIO4 | INTMSK0 */ - {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ - {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ - {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ - {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ - {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ - {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ - {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ - {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ - /* INTPRIO8 | INTMSK0 */ - {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ - {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ - {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ - {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ - {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ - {65, 8, 24, 0, 16, 3}, /* LCDC */ - /* 66, 67 unused */ - {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ - {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ - {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ - /* 71 unused */ - {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ - {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ - {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ - {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ - {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ - {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ - {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ - {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ - /* | INTMSK4 */ - {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ - {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ - {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ - {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ - {84, 8, 0, 4, 19, 3}, /* HSPII */ - /* INTPRIOC | INTMSK4 */ - /* 85-87 unused/reserved */ - {88, 12, 20, 4, 18, 3}, /* MMCI0 */ - {89, 12, 20, 4, 17, 3}, /* MMCI1 */ - {90, 12, 20, 4, 16, 3}, /* MMCI2 */ - {91, 12, 20, 4, 15, 3}, /* MMCI3 */ - {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ - /* 93-107 reserved/undocumented */ - {108,12, 4, 4, 1, 3}, /* ADC */ - {109,12, 0, 4, 0, 3}, /* CMTI */ - /* 110-111 reserved/unused */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7780) - { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2}, - { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, - { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, - { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + /* Set the priority level */ + local_irq_save(flags); - { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, - { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + + p->ipr_offset); + ipr &= ~(0xf << p->ipr_shift); + ipr |= p->priority << p->ipr_shift; + ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + + p->ipr_offset); - { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, - { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, - { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, - { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, - { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, -#endif -}; + local_irq_restore(flags); -void __init init_IRQ_intc2(void) -{ - int i; + set_irq_chip_and_handler_name(p->irq, &intc2_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(p->irq, p); - for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) { - struct intc2_init *p = intc2_init_data + i; - make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift, - p-> msk_offset, p->msk_shift, p->priority); + enable_intc2_irq(p->irq); } } - -/* Adds a termination callback to the interrupt */ -void intc2_add_clear_irq(int irq, int (*fn)(int)) -{ - if (unlikely(irq < INTC2_FIRST_IRQ)) - return; - - intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn; -} - diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c index f785822cd5d..a0089563cbf 100644 --- a/arch/sh/kernel/cpu/irq/ipr.c +++ b/arch/sh/kernel/cpu/irq/ipr.c @@ -1,11 +1,10 @@ /* - * arch/sh/kernel/cpu/irq/ipr.c + * Interrupt handling for IPR-based IRQ. * * Copyright (C) 1999 Niibe Yutaka & Takeshi Yaegashi * Copyright (C) 2000 Kazumoto Kojima - * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> - * - * Interrupt handling for IPR-based IRQ. + * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp> + * Copyright (C) 2006 Paul Mundt * * Supported system: * On-chip supporting modules (TMU, RTC, etc.). @@ -13,151 +12,92 @@ * Hitachi SolutionEngine external I/O: * MS7709SE01, MS7709ASE01, and MS7750SE01 * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ - #include <linux/init.h> #include <linux/irq.h> #include <linux/module.h> - #include <asm/system.h> #include <asm/io.h> #include <asm/machvec.h> -struct ipr_data { - unsigned int addr; /* Address of Interrupt Priority Register */ - int shift; /* Shifts of the 16-bit data */ - int priority; /* The priority */ -}; -static struct ipr_data ipr_data[NR_IRQS]; - -static void enable_ipr_irq(unsigned int irq); -static void disable_ipr_irq(unsigned int irq); - -/* shutdown is same as "disable" */ -#define shutdown_ipr_irq disable_ipr_irq - -static void mask_and_ack_ipr(unsigned int); -static void end_ipr_irq(unsigned int irq); - -static unsigned int startup_ipr_irq(unsigned int irq) -{ - enable_ipr_irq(irq); - return 0; /* never anything pending */ -} - -static struct hw_interrupt_type ipr_irq_type = { - .typename = "IPR-IRQ", - .startup = startup_ipr_irq, - .shutdown = shutdown_ipr_irq, - .enable = enable_ipr_irq, - .disable = disable_ipr_irq, - .ack = mask_and_ack_ipr, - .end = end_ipr_irq -}; static void disable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); + int shift = p->shift*4; /* Set the priority in IPR to 0 */ - val = ctrl_inw(addr); - val &= mask; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr); } static void enable_ipr_irq(unsigned int irq) { - unsigned long val; - unsigned int addr = ipr_data[irq].addr; - int priority = ipr_data[irq].priority; - unsigned short value = (priority << ipr_data[irq].shift); - + struct ipr_data *p = get_irq_chip_data(irq); + int shift = p->shift*4; /* Set priority in IPR back to original value */ - val = ctrl_inw(addr); - val |= value; - ctrl_outw(val, addr); + ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr); } -static void mask_and_ack_ipr(unsigned int irq) -{ - disable_ipr_irq(irq); - -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) - /* This is needed when we use edge triggered setting */ - /* XXX: Is it really needed? */ - if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) { - /* Clear external interrupt request */ - int a = ctrl_inb(INTC_IRR0); - a &= ~(1 << (irq - IRQ0_IRQ)); - ctrl_outb(a, INTC_IRR0); - } -#endif -} +static struct irq_chip ipr_irq_chip = { + .name = "IPR", + .mask = disable_ipr_irq, + .unmask = enable_ipr_irq, + .mask_ack = disable_ipr_irq, +}; -static void end_ipr_irq(unsigned int irq) +void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs) { - if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + int i; + + for (i = 0; i < nr_irqs; i++) { + unsigned int irq = table[i].irq; + disable_irq_nosync(irq); + set_irq_chip_and_handler_name(irq, &ipr_irq_chip, + handle_level_irq, "level"); + set_irq_chip_data(irq, &table[i]); enable_ipr_irq(irq); + } } +EXPORT_SYMBOL(make_ipr_irq); -void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) -{ - disable_irq_nosync(irq); - ipr_data[irq].addr = addr; - ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */ - ipr_data[irq].priority = priority; - - irq_desc[irq].chip = &ipr_irq_type; - disable_ipr_irq(irq); -} - -void __init init_IRQ(void) -{ +static struct ipr_data sys_ipr_map[] = { #ifndef CONFIG_CPU_SUBTYPE_SH7780 - make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); - make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); + { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY }, + { TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY }, #ifdef RTC_IRQ - make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); + { RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY }, #endif - #ifdef SCI_ERI_IRQ - make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); - make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); + { SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, + { SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, + { SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY }, #endif - #ifdef SCIF1_ERI_IRQ - make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); - make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); + { SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY }, #endif - #if defined(CONFIG_CPU_SUBTYPE_SH7300) - make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); - make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); - make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); + { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY }, + { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY }, + { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY }, #endif - #ifdef SCIF_ERI_IRQ - make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); - make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); + { SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, + { SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY }, #endif - #ifdef IRDA_ERI_IRQ - make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); - make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); + { IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, + { IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY }, #endif - #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) @@ -171,14 +111,19 @@ void __init init_IRQ(void) * You should set corresponding bits of PFC to "00" * to enable these interrupts. */ - make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); - make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); - make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); - make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); - make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); - make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); + { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY }, + { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY }, + { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY }, + { IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY }, + { IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY }, + { IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY }, #endif #endif +}; + +void __init init_IRQ(void) +{ + make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map)); #ifdef CONFIG_CPU_HAS_PINT_IRQ init_IRQ_pint(); @@ -200,5 +145,3 @@ int ipr_irq_demux(int irq) return irq; } #endif - -EXPORT_SYMBOL(make_ipr_irq); diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c index 17f47b373d6..f60007783a2 100644 --- a/arch/sh/kernel/cpu/irq/pint.c +++ b/arch/sh/kernel/cpu/irq/pint.c @@ -84,12 +84,16 @@ void make_pint_irq(unsigned int irq) disable_pint_irq(irq); } +static struct ipr_data pint_ipr_map[] = { + { PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY }, + { PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY }, +}; + void __init init_IRQ_pint(void) { int i; - make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); - make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY); + make_ipr_irq(pint_ipr_map, ARRAY_SIZE(pint_ipr_map)); enable_irq(PINT0_IRQ); enable_irq(PINT8_IRQ); diff --git a/arch/sh/kernel/cpu/sh3/ex.S b/arch/sh/kernel/cpu/sh3/ex.S index 44daf44833f..ba3082d640b 100644 --- a/arch/sh/kernel/cpu/sh3/ex.S +++ b/arch/sh/kernel/cpu/sh3/ex.S @@ -4,7 +4,7 @@ * The SH-3 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -49,198 +49,10 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7706) || \ - defined(CONFIG_CPU_SUBTYPE_SH7300) || \ - defined(CONFIG_CPU_SUBTYPE_SH7705) || \ - defined(CONFIG_CPU_SUBTYPE_SH7710) - .long do_IRQ ! 32 IRQ irq0 /* 600 */ - .long do_IRQ ! 33 irq1 - .long do_IRQ ! 34 irq2 - .long do_IRQ ! 35 irq3 - .long do_IRQ ! 36 irq4 - .long do_IRQ ! 37 irq5 - .long do_IRQ ! 38 - .long do_IRQ ! 39 - .long do_IRQ ! 40 PINT pint0-7 /* 700 */ - .long do_IRQ ! 41 pint8-15 - .long do_IRQ ! 42 - .long do_IRQ ! 43 - .long do_IRQ ! 44 - .long do_IRQ ! 45 - .long do_IRQ ! 46 - .long do_IRQ ! 47 - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 - .long do_IRQ ! 50 dei2 - .long do_IRQ ! 51 dei3 - .long do_IRQ ! 52 IrDA eri1 - .long do_IRQ ! 53 rxi1 - .long do_IRQ ! 54 bri1 - .long do_IRQ ! 55 txi1 - .long do_IRQ ! 56 SCIF eri2 - .long do_IRQ ! 57 rxi2 - .long do_IRQ ! 58 bri2 - .long do_IRQ ! 59 txi2 - .long do_IRQ ! 60 ADC adi /* 980 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7705) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long do_IRQ ! 65 USB usi0 - .long do_IRQ ! 66 usi1 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long exception_none ! 76 - .long exception_none ! 77 - .long exception_none ! 78 - .long exception_none ! 79 - .long do_IRQ ! 80 TPU0 tpi0 /* C00 */ - .long do_IRQ ! 81 TPU1 tpi1 - .long exception_none ! 82 - .long exception_none ! 83 - .long do_IRQ ! 84 TPU2 tpi2 - .long do_IRQ ! 85 TPU3 tpi3 /* CA0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 61 LCDC lcdi /* 9A0 */ - .long do_IRQ ! 62 PCC pcc0i - .long do_IRQ ! 63 pcc1i /* 9E0 */ -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7710) - .long exception_none ! 61 /* 9A0 */ - .long exception_none ! 62 - .long exception_none ! 63 - .long exception_none ! 64 /* A00 */ - .long exception_none ! 65 - .long exception_none ! 66 - .long exception_none ! 67 - .long exception_none ! 68 - .long exception_none ! 69 - .long exception_none ! 70 - .long exception_none ! 71 - .long exception_none ! 72 /* B00 */ - .long exception_none ! 73 - .long exception_none ! 74 - .long exception_none ! 75 - .long do_IRQ ! 76 DMAC2 dei4 /* B80 */ - .long do_IRQ ! 77 DMAC2 dei5 - .long exception_none ! 78 - .long do_IRQ ! 79 IPSEC ipseci /* BE0 */ - .long do_IRQ ! 80 EDMAC eint0 /* C00 */ - .long do_IRQ ! 81 EDMAC eint1 - .long do_IRQ ! 82 EDMAC eint2 - .long exception_none ! 83 /* C60 */ - .long exception_none ! 84 - .long exception_none ! 85 - .long exception_none ! 86 - .long exception_none ! 87 - .long exception_none ! 88 /* D00 */ - .long exception_none ! 89 - .long exception_none ! 90 - .long exception_none ! 91 - .long exception_none ! 92 - .long exception_none ! 93 - .long exception_none ! 94 - .long exception_none ! 95 - .long do_IRQ ! 96 SIOF eri0 /* E00 */ - .long do_IRQ ! 97 txi0 - .long do_IRQ ! 98 rxi0 - .long do_IRQ ! 99 cci0 - .long do_IRQ ! 100 eri1 /* E80 */ - .long do_IRQ ! 101 txi1 - .long do_IRQ ! 102 rxi2 - .long do_IRQ ! 103 cci3 -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7300) - .long do_IRQ ! 64 - .long do_IRQ ! 65 - .long do_IRQ ! 66 - .long do_IRQ ! 67 - .long do_IRQ ! 68 - .long do_IRQ ! 69 - .long do_IRQ ! 70 - .long do_IRQ ! 71 - .long do_IRQ ! 72 - .long do_IRQ ! 73 - .long do_IRQ ! 74 - .long do_IRQ ! 75 - .long do_IRQ ! 76 - .long do_IRQ ! 77 - .long do_IRQ ! 78 - .long do_IRQ ! 79 - .long do_IRQ ! 80 SCIF0(SH7300) - .long do_IRQ ! 81 - .long do_IRQ ! 82 - .long do_IRQ ! 83 - .long do_IRQ ! 84 - .long do_IRQ ! 85 - .long do_IRQ ! 86 - .long do_IRQ ! 87 - .long do_IRQ ! 88 - .long do_IRQ ! 89 - .long do_IRQ ! 90 - .long do_IRQ ! 91 - .long do_IRQ ! 92 - .long do_IRQ ! 93 - .long do_IRQ ! 94 - .long do_IRQ ! 95 - .long do_IRQ ! 96 - .long do_IRQ ! 97 - .long do_IRQ ! 98 - .long do_IRQ ! 99 - .long do_IRQ ! 100 - .long do_IRQ ! 101 - .long do_IRQ ! 102 - .long do_IRQ ! 103 - .long do_IRQ ! 104 - .long do_IRQ ! 105 - .long do_IRQ ! 106 - .long do_IRQ ! 107 - .long do_IRQ ! 108 -#endif -#endif + + /* + * Pad the remainder of the table out, exceptions residing in far + * away offsets can be manually inserted in to their appropriate + * location via set_exception_table_{evt,vec}(). + */ + .balign 4096,0,4096 diff --git a/arch/sh/kernel/cpu/sh4/ex.S b/arch/sh/kernel/cpu/sh4/ex.S index 7146893a6cc..ac8ab57413c 100644 --- a/arch/sh/kernel/cpu/sh4/ex.S +++ b/arch/sh/kernel/cpu/sh4/ex.S @@ -4,7 +4,7 @@ * The SH-4 exception vector table. * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -53,503 +53,10 @@ ENTRY(nmi_slot) #endif ENTRY(user_break_point_trap) .long break_point_trap /* 1E0 */ -ENTRY(interrupt_table) - ! external hardware - .long do_IRQ ! 0000 /* 200 */ - .long do_IRQ ! 0001 - .long do_IRQ ! 0010 - .long do_IRQ ! 0011 - .long do_IRQ ! 0100 - .long do_IRQ ! 0101 - .long do_IRQ ! 0110 - .long do_IRQ ! 0111 - .long do_IRQ ! 1000 /* 300 */ - .long do_IRQ ! 1001 - .long do_IRQ ! 1010 - .long do_IRQ ! 1011 - .long do_IRQ ! 1100 - .long do_IRQ ! 1101 - .long do_IRQ ! 1110 - .long exception_error - ! Internal hardware -#ifndef CONFIG_CPU_SUBTYPE_SH7780 - .long do_IRQ ! TMU0 tuni0 /* 400 */ - .long do_IRQ ! TMU1 tuni1 - .long do_IRQ ! TMU2 tuni2 - .long do_IRQ ! ticpi2 -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error -#else - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long do_IRQ ! SCI eri - .long do_IRQ ! rxi /* 500 */ - .long do_IRQ ! txi - .long do_IRQ ! tei -#endif - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! REF rcmi - .long do_IRQ ! rovi - .long do_IRQ - .long do_IRQ /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long do_IRQ ! 33 GPIO - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ -#if defined(CONFIG_CPU_SUBTYPE_SH7760) - .long exception_error /* 700 */ - .long exception_error - .long exception_error - .long exception_error /* 760 */ -#else - .long do_IRQ ! 40 SCIF eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi -#endif -#if CONFIG_NR_ONCHIP_DMA_CHANNELS == 8 - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 44 IIC1 ali /* 780 */ - .long do_IRQ ! 45 tacki - .long do_IRQ ! 46 waiti - .long do_IRQ ! 47 dtei /* 7E0 */ - .long do_IRQ ! 48 DMAC dei0 /* 800 */ - .long do_IRQ ! 49 dei1 /* 820 */ -#else - .long exception_error ! 44 /* 780 */ - .long exception_error ! 45 - .long exception_error ! 46 - .long exception_error ! 47 -#endif -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#elif !defined(CONFIG_CPU_SUBTYPE_SH7343) && \ - !defined(CONFIG_CPU_SUBTYPE_SH73180) - .long exception_error - .long exception_error -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7751) - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! dma3 - .long do_IRQ ! dma2 - .long do_IRQ ! dma1 - .long do_IRQ ! dma0 - .long do_IRQ ! pwon - .long do_IRQ ! pwdwn - .long do_IRQ ! err - .long do_IRQ ! TMU3 tuni3 /* B00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! TMU4 tuni4 /* B80 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH7760) - .long do_IRQ ! IRQ irq6 /* 840 */ - .long do_IRQ ! irq7 - .long do_IRQ ! SCIF eri0 - .long do_IRQ ! rxi0 - .long do_IRQ ! bri0 - .long do_IRQ ! txi0 - .long do_IRQ ! HCAN2 cani0 /* 900 */ - .long do_IRQ ! cani1 - .long do_IRQ ! SSI ssii0 - .long do_IRQ ! ssii1 - .long do_IRQ ! HAC haci0 - .long do_IRQ ! haci1 - .long do_IRQ ! IIC iici0 - .long do_IRQ ! iici1 - .long do_IRQ ! USB usbi /* A00 */ - .long do_IRQ ! LCDC vint - .long exception_error - .long exception_error - .long do_IRQ ! DMABRG dmabrgi0 - .long do_IRQ ! dmabrgi1 - .long do_IRQ ! dmabrgi2 - .long exception_error - .long do_IRQ ! SCIF eri1 /* B00 */ - .long do_IRQ ! rxi1 - .long do_IRQ ! bri1 - .long do_IRQ ! txi1 - .long do_IRQ ! eri2 - .long do_IRQ ! rxi2 - .long do_IRQ ! bri2 - .long do_IRQ ! txi2 - .long do_IRQ ! SIM simeri /* C00 */ - .long do_IRQ ! simrxi - .long do_IRQ ! simtxi - .long do_IRQ ! simtei - .long do_IRQ ! HSPI spii - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF mmci0 /* D00 */ - .long do_IRQ ! mmci1 - .long do_IRQ ! mmci2 - .long do_IRQ ! mmci3 - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* E00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MFI mfii - .long exception_error - .long exception_error - .long exception_error - .long exception_error /* F00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! ADC adi - .long do_IRQ ! CMT cmti /* FA0 */ -#elif defined(CONFIG_CPU_SUBTYPE_SH73180) || defined(CONFIG_CPU_SUBTYPE_SH7343) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa40 - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#elif defined(CONFIG_CPU_SUBTYPE_ST40STB1) - .long exception_error ! 50 0x840 - .long exception_error ! 51 0x860 - .long exception_error ! 52 0x880 - .long exception_error ! 53 0x8a0 - .long exception_error ! 54 0x8c0 - .long exception_error ! 55 0x8e0 - .long exception_error ! 56 0x900 - .long exception_error ! 57 0x920 - .long exception_error ! 58 0x940 - .long exception_error ! 59 0x960 - .long exception_error ! 60 0x980 - .long exception_error ! 61 0x9a0 - .long exception_error ! 62 0x9c0 - .long exception_error ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 PCI serr - .long do_IRQ ! 65 0xa20 err - .long do_IRQ ! 66 0xa40 ad - .long do_IRQ ! 67 0xa60 pwr_dwn - .long exception_error ! 68 0xa80 - .long exception_error ! 69 0xaa0 - .long exception_error ! 70 0xac0 - .long exception_error ! 71 0xae0 - .long do_IRQ ! 72 0xb00 DMA INT0 - .long do_IRQ ! 73 0xb20 INT1 - .long do_IRQ ! 74 0xb40 INT2 - .long do_IRQ ! 75 0xb60 INT3 - .long do_IRQ ! 76 0xb80 INT4 - .long exception_error ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 DMA ERR - .long exception_error ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 PIO0 - .long do_IRQ ! 81 0xc20 PIO1 - .long do_IRQ ! 82 0xc40 PIO2 - .long exception_error ! 83 0xc60 - .long exception_error ! 84 0xc80 - .long exception_error ! 85 0xca0 - .long exception_error ! 86 0xcc0 - .long exception_error ! 87 0xce0 - .long exception_error ! 88 0xd00 - .long exception_error ! 89 0xd20 - .long exception_error ! 90 0xd40 - .long exception_error ! 91 0xd60 - .long exception_error ! 92 0xd80 - .long exception_error ! 93 0xda0 - .long exception_error ! 94 0xdc0 - .long exception_error ! 95 0xde0 - .long exception_error ! 96 0xe00 - .long exception_error ! 97 0xe20 - .long exception_error ! 98 0xe40 - .long exception_error ! 99 0xe60 - .long exception_error ! 100 0xe80 - .long exception_error ! 101 0xea0 - .long exception_error ! 102 0xec0 - .long exception_error ! 103 0xee0 - .long exception_error ! 104 0xf00 - .long exception_error ! 105 0xf20 - .long exception_error ! 106 0xf40 - .long exception_error ! 107 0xf60 - .long exception_error ! 108 0xf80 - .long exception_error ! 109 0xfa0 - .long exception_error ! 110 0xfc0 - .long exception_error ! 111 0xfe0 - .long do_IRQ ! 112 0x1000 Mailbox - .long exception_error ! 113 0x1020 - .long exception_error ! 114 0x1040 - .long exception_error ! 115 0x1060 - .long exception_error ! 116 0x1080 - .long exception_error ! 117 0x10a0 - .long exception_error ! 118 0x10c0 - .long exception_error ! 119 0x10e0 - .long exception_error ! 120 0x1100 - .long exception_error ! 121 0x1120 - .long exception_error ! 122 0x1140 - .long exception_error ! 123 0x1160 - .long exception_error ! 124 0x1180 - .long exception_error ! 125 0x11a0 - .long exception_error ! 126 0x11c0 - .long exception_error ! 127 0x11e0 - .long exception_error ! 128 0x1200 - .long exception_error ! 129 0x1220 - .long exception_error ! 130 0x1240 - .long exception_error ! 131 0x1260 - .long exception_error ! 132 0x1280 - .long exception_error ! 133 0x12a0 - .long exception_error ! 134 0x12c0 - .long exception_error ! 135 0x12e0 - .long exception_error ! 136 0x1300 - .long exception_error ! 137 0x1320 - .long exception_error ! 138 0x1340 - .long exception_error ! 139 0x1360 - .long do_IRQ ! 140 0x1380 EMPI INV_ADDR - .long exception_error ! 141 0x13a0 - .long exception_error ! 142 0x13c0 - .long exception_error ! 143 0x13e0 -#elif defined(CONFIG_CPU_SUBTYPE_SH7770) - .long do_IRQ ! 50 0x840 - .long do_IRQ ! 51 0x860 - .long do_IRQ ! 52 0x880 - .long do_IRQ ! 53 0x8a0 - .long do_IRQ ! 54 0x8c0 - .long do_IRQ ! 55 0x8e0 - .long do_IRQ ! 56 0x900 - .long do_IRQ ! 57 0x920 - .long do_IRQ ! 58 0x940 - .long do_IRQ ! 59 0x960 - .long do_IRQ ! 60 0x980 - .long do_IRQ ! 61 0x9a0 - .long do_IRQ ! 62 0x9c0 - .long do_IRQ ! 63 0x9e0 - .long do_IRQ ! 64 0xa00 - .long do_IRQ ! 65 0xa20 - .long do_IRQ ! 66 0xa4d - .long do_IRQ ! 67 0xa60 - .long do_IRQ ! 68 0xa80 - .long do_IRQ ! 69 0xaa0 - .long do_IRQ ! 70 0xac0 - .long do_IRQ ! 71 0xae0 - .long do_IRQ ! 72 0xb00 - .long do_IRQ ! 73 0xb20 - .long do_IRQ ! 74 0xb40 - .long do_IRQ ! 75 0xb60 - .long do_IRQ ! 76 0xb80 - .long do_IRQ ! 77 0xba0 - .long do_IRQ ! 78 0xbc0 - .long do_IRQ ! 79 0xbe0 - .long do_IRQ ! 80 0xc00 - .long do_IRQ ! 81 0xc20 - .long do_IRQ ! 82 0xc40 - .long do_IRQ ! 83 0xc60 - .long do_IRQ ! 84 0xc80 - .long do_IRQ ! 85 0xca0 - .long do_IRQ ! 86 0xcc0 - .long do_IRQ ! 87 0xce0 - .long do_IRQ ! 88 0xd00 - .long do_IRQ ! 89 0xd20 - .long do_IRQ ! 90 0xd40 - .long do_IRQ ! 91 0xd60 - .long do_IRQ ! 92 0xd80 - .long do_IRQ ! 93 0xda0 - .long do_IRQ ! 94 0xdc0 - .long do_IRQ ! 95 0xde0 - .long do_IRQ ! 96 0xe00 - .long do_IRQ ! 97 0xe20 - .long do_IRQ ! 98 0xe40 - .long do_IRQ ! 99 0xe60 - .long do_IRQ ! 100 0xe80 - .long do_IRQ ! 101 0xea0 - .long do_IRQ ! 102 0xec0 - .long do_IRQ ! 103 0xee0 - .long do_IRQ ! 104 0xf00 - .long do_IRQ ! 105 0xf20 - .long do_IRQ ! 106 0xf40 - .long do_IRQ ! 107 0xf60 - .long do_IRQ ! 108 0xf80 -#endif -#else - .long exception_error /* 400 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! RTC ati - .long do_IRQ ! pri - .long do_IRQ ! cui - .long exception_error - .long exception_error /* 500 */ - .long exception_error - .long exception_error - .long do_IRQ ! WDT iti /* 560 */ - .long do_IRQ ! TMU-ch0 - .long do_IRQ ! TMU-ch1 - .long do_IRQ ! TMU-ch2 - .long do_IRQ ! ticpi2 /* 5E0 */ - .long do_IRQ ! 32 Hitachi UDI /* 600 */ - .long exception_error - .long do_IRQ ! 34 DMAC dmte0 - .long do_IRQ ! 35 dmte1 - .long do_IRQ ! 36 dmte2 - .long do_IRQ ! 37 dmte3 - .long do_IRQ ! 38 dmae - .long exception_error ! 39 /* 6E0 */ - .long do_IRQ ! 40 SCIF-ch0 eri /* 700 */ - .long do_IRQ ! 41 rxi - .long do_IRQ ! 42 bri - .long do_IRQ ! 43 txi - .long do_IRQ ! 44 DMAC dmte4 /* 780 */ - .long do_IRQ ! 45 dmte5 - .long do_IRQ ! 46 dmte6 - .long do_IRQ ! 47 dmte7 /* 7E0 */ -#if defined(CONFIG_SH_FPU) - .long do_fpu_state_restore ! 48 /* 800 */ - .long do_fpu_state_restore ! 49 /* 820 */ -#else - .long exception_error - .long exception_error -#endif - .long exception_error /* 840 */ - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 56 CMT /* 900 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! 60 HAC - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! PCI serr /* A00 */ - .long do_IRQ ! INTA - .long do_IRQ ! INTB - .long do_IRQ ! INTC - .long do_IRQ ! INTD - .long do_IRQ ! err - .long do_IRQ ! pwd3 - .long do_IRQ ! pwd2 - .long do_IRQ ! pwd1 /* B00 */ - .long do_IRQ ! pwd0 - .long exception_error - .long exception_error - .long do_IRQ ! SCIF-ch1 eri /* B80 */ - .long do_IRQ ! rxi - .long do_IRQ ! bri - .long do_IRQ ! txi - .long do_IRQ ! SIOF /* C00 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! HSPI /* C80 */ - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! MMCIF fatat /* D00 */ - .long do_IRQ ! tran - .long do_IRQ ! err - .long do_IRQ ! frdy - .long do_IRQ ! DMAC dmint8 /* D80 */ - .long do_IRQ ! dmint9 - .long do_IRQ ! dmint10 - .long do_IRQ ! dmint11 - .long do_IRQ ! TMU-ch3 /* E00 */ - .long do_IRQ ! TMU-ch4 - .long do_IRQ ! TMU-ch5 - .long exception_error - .long do_IRQ ! SSI - .long exception_error - .long exception_error - .long exception_error - .long do_IRQ ! FLCTL flste /* F00 */ - .long do_IRQ ! fltend - .long do_IRQ ! fltrq0 - .long do_IRQ ! fltrq1 - .long do_IRQ ! GPIO gpioi0 /* F80 */ - .long do_IRQ ! gpioi1 - .long do_IRQ ! gpioi2 - .long do_IRQ ! gpioi3 -#endif + /* + * Pad the remainder of the table out, exceptions residing in far + * away offsets can be manually inserted in to their appropriate + * location via set_exception_table_{evt,vec}(). + */ + .balign 4096,0,4096 diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7760.c b/arch/sh/kernel/cpu/sh4/setup-sh7760.c index 97f1c9af35d..07e5377bf55 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7760.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7760.c @@ -51,3 +51,66 @@ static int __init sh7760_devices_setup(void) ARRAY_SIZE(sh7760_devices)); } __initcall(sh7760_devices_setup); + +/* + * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0 + */ +static struct intc2_data intc2_irq_table[] = { + /* INTPRIO0 | INTMSK0 */ + {48, 0, 28, 0, 31, 3}, /* IRQ 4 */ + {49, 0, 24, 0, 30, 3}, /* IRQ 3 */ + {50, 0, 20, 0, 29, 3}, /* IRQ 2 */ + {51, 0, 16, 0, 28, 3}, /* IRQ 1 */ + /* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */ + /* INTPRIO4 | INTMSK0 */ + {56, 4, 28, 0, 25, 3}, /* HCAN2_CHAN0 */ + {57, 4, 24, 0, 24, 3}, /* HCAN2_CHAN1 */ + {58, 4, 20, 0, 23, 3}, /* I2S_CHAN0 */ + {59, 4, 16, 0, 22, 3}, /* I2S_CHAN1 */ + {60, 4, 12, 0, 21, 3}, /* AC97_CHAN0 */ + {61, 4, 8, 0, 20, 3}, /* AC97_CHAN1 */ + {62, 4, 4, 0, 19, 3}, /* I2C_CHAN0 */ + {63, 4, 0, 0, 18, 3}, /* I2C_CHAN1 */ + /* INTPRIO8 | INTMSK0 */ + {52, 8, 16, 0, 11, 3}, /* SCIF0_ERI_IRQ */ + {53, 8, 16, 0, 10, 3}, /* SCIF0_RXI_IRQ */ + {54, 8, 16, 0, 9, 3}, /* SCIF0_BRI_IRQ */ + {55, 8, 16, 0, 8, 3}, /* SCIF0_TXI_IRQ */ + {64, 8, 28, 0, 17, 3}, /* USBHI_IRQ */ + {65, 8, 24, 0, 16, 3}, /* LCDC */ + /* 66, 67 unused */ + {68, 8, 20, 0, 14, 13}, /* DMABRGI0_IRQ */ + {69, 8, 20, 0, 13, 13}, /* DMABRGI1_IRQ */ + {70, 8, 20, 0, 12, 13}, /* DMABRGI2_IRQ */ + /* 71 unused */ + {72, 8, 12, 0, 7, 3}, /* SCIF1_ERI_IRQ */ + {73, 8, 12, 0, 6, 3}, /* SCIF1_RXI_IRQ */ + {74, 8, 12, 0, 5, 3}, /* SCIF1_BRI_IRQ */ + {75, 8, 12, 0, 4, 3}, /* SCIF1_TXI_IRQ */ + {76, 8, 8, 0, 3, 3}, /* SCIF2_ERI_IRQ */ + {77, 8, 8, 0, 2, 3}, /* SCIF2_RXI_IRQ */ + {78, 8, 8, 0, 1, 3}, /* SCIF2_BRI_IRQ */ + {79, 8, 8, 0, 0, 3}, /* SCIF2_TXI_IRQ */ + /* | INTMSK4 */ + {80, 8, 4, 4, 23, 3}, /* SIM_ERI */ + {81, 8, 4, 4, 22, 3}, /* SIM_RXI */ + {82, 8, 4, 4, 21, 3}, /* SIM_TXI */ + {83, 8, 4, 4, 20, 3}, /* SIM_TEI */ + {84, 8, 0, 4, 19, 3}, /* HSPII */ + /* INTPRIOC | INTMSK4 */ + /* 85-87 unused/reserved */ + {88, 12, 20, 4, 18, 3}, /* MMCI0 */ + {89, 12, 20, 4, 17, 3}, /* MMCI1 */ + {90, 12, 20, 4, 16, 3}, /* MMCI2 */ + {91, 12, 20, 4, 15, 3}, /* MMCI3 */ + {92, 12, 12, 4, 6, 3}, /* MFI (unsure, bug? in my 7760 manual*/ + /* 93-107 reserved/undocumented */ + {108,12, 4, 4, 1, 3}, /* ADC */ + {109,12, 0, 4, 0, 3}, /* CMTI */ + /* 110-111 reserved/unused */ +}; + +void __init init_IRQ_intc2(void) +{ + make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); +} diff --git a/arch/sh/kernel/cpu/sh4/setup-sh7780.c b/arch/sh/kernel/cpu/sh4/setup-sh7780.c index 72493f259ed..814ddb22653 100644 --- a/arch/sh/kernel/cpu/sh4/setup-sh7780.c +++ b/arch/sh/kernel/cpu/sh4/setup-sh7780.c @@ -77,3 +77,30 @@ static int __init sh7780_devices_setup(void) ARRAY_SIZE(sh7780_devices)); } __initcall(sh7780_devices_setup); + +static struct intc2_data intc2_irq_table[] = { + { TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2 }, + { 21, 1, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 22, 1, 1, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { 23, 1, 2, 0, INTC_RTC_MSK, TIMER_PRIORITY }, + { SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + { SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY }, + + { SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + { SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY }, + + { PCIC0_IRQ, 0x10, 8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY }, + { PCIC1_IRQ, 0x10, 0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY }, + { PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY }, + { PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY }, + { PCIC4_IRQ, 0x14, 8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY }, +}; + +void __init init_IRQ_intc2(void) +{ + make_intc2_irq(intc2_irq_table, ARRAY_SIZE(intc2_irq_table)); +} diff --git a/arch/sh/kernel/entry.S b/arch/sh/kernel/entry.S index 97c571fbcdf..39aaefb2d83 100644 --- a/arch/sh/kernel/entry.S +++ b/arch/sh/kernel/entry.S @@ -1,9 +1,8 @@ -/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $ - * +/* * linux/arch/sh/entry.S * * Copyright (C) 1999, 2000, 2002 Niibe Yutaka - * Copyright (C) 2003 Paul Mundt + * Copyright (C) 2003 - 2006 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -78,7 +77,6 @@ OFF_TRA = (16*4+6*4) #define k3 r3 #define k4 r4 -#define k_ex_code r2_bank /* r2_bank1 */ #define g_imask r6 /* r6_bank1 */ #define k_g_imask r6_bank /* r6_bank1 */ #define current r7 /* r7_bank1 */ @@ -691,7 +689,7 @@ interrupt: 0: #endif /* defined(CONFIG_KGDB_NMI) */ bra handle_exception - mov.l @k2, k2 + mov #-1, k2 ! interrupt exception marker .align 2 1: .long EXPEVT @@ -717,8 +715,7 @@ ENTRY(handle_exception) add current, k1 mov k1, r15 ! change to kernel stack ! -1: mov #-1, k4 - mov.l 2f, k1 +1: mov.l 2f, k1 ! #ifdef CONFIG_SH_DSP mov.l r2, @-r15 ! Save r2, we need another reg @@ -763,6 +760,8 @@ skip_save: #endif ! Save the user registers on the stack. mov.l k2, @-r15 ! EXPEVT + + mov #-1, k4 mov.l k4, @-r15 ! set TRA (default: -1) ! sts.l macl, @-r15 @@ -797,8 +796,21 @@ skip_save: mov.l r2, @-r15 mov.l r1, @-r15 mov.l r0, @-r15 - ! Then, dispatch to the handler, according to the exception code. - stc k_ex_code, r8 + + /* + * This gets a bit tricky.. in the INTEVT case we don't want to use + * the VBR offset as a destination in the jump call table, since all + * of the destinations are the same. In this case, (interrupt) sets + * a marker in r2 (now r2_bank since SR.RB changed), which we check + * to determine the exception type. For all other exceptions, we + * forcibly read EXPEVT from memory and fix up the jump address, in + * the interrupt exception case we jump to do_IRQ() and defer the + * INTEVT read until there. As a bonus, we can also clean up the SR.RB + * checks that do_IRQ() was doing.. + */ + stc r2_bank, r8 + cmp/pz r8 + bf interrupt_exception shlr2 r8 shlr r8 mov.l 4f, r9 @@ -806,6 +818,8 @@ skip_save: mov.l @r9, r9 jmp @r9 nop + rts + nop .align 2 1: .long 0x00001000 ! DSP=1 @@ -813,8 +827,17 @@ skip_save: 3: .long 0xcfffffff ! RB=0, BL=0 4: .long exception_handling_table +interrupt_exception: + mov.l 1f, r9 + jmp @r9 + nop + rts + nop + + .align 2 +1: .long do_IRQ + .align 2 ENTRY(exception_none) rts nop - diff --git a/arch/sh/kernel/irq.c b/arch/sh/kernel/irq.c index c7ebd6aec95..944128ce970 100644 --- a/arch/sh/kernel/irq.c +++ b/arch/sh/kernel/irq.c @@ -11,12 +11,15 @@ #include <linux/module.h> #include <linux/kernel_stat.h> #include <linux/seq_file.h> +#include <linux/io.h> #include <asm/irq.h> #include <asm/processor.h> #include <asm/uaccess.h> #include <asm/thread_info.h> #include <asm/cpu/mmu_context.h> +atomic_t irq_err_count; + /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves, it doesn't deserve @@ -24,6 +27,7 @@ */ void ack_bad_irq(unsigned int irq) { + atomic_inc(&irq_err_count); printk("unexpected IRQ trap at vector %02x\n", irq); } @@ -47,8 +51,10 @@ int show_interrupts(struct seq_file *p, void *v) if (!action) goto unlock; seq_printf(p, "%3d: ",i); - seq_printf(p, "%10u ", kstat_irqs(i)); - seq_printf(p, " %14s", irq_desc[i].chip->typename); + for_each_online_cpu(j) + seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); + seq_printf(p, " %14s", irq_desc[i].chip->name); + seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) @@ -56,7 +62,9 @@ int show_interrupts(struct seq_file *p, void *v) seq_putc(p, '\n'); unlock: spin_unlock_irqrestore(&irq_desc[i].lock, flags); - } + } else if (i == NR_IRQS) + seq_printf(p, "Err: %10u\n", atomic_read(&irq_err_count)); + return 0; } #endif @@ -78,7 +86,8 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, struct pt_regs regs) { - int irq = r4; + struct pt_regs *old_regs = set_irq_regs(®s); + int irq; #ifdef CONFIG_4KSTACKS union irq_ctx *curctx, *irqctx; #endif @@ -102,20 +111,9 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, #endif #ifdef CONFIG_CPU_HAS_INTEVT - __asm__ __volatile__ ( -#ifdef CONFIG_CPU_HAS_SR_RB - "stc r2_bank, %0\n\t" + irq = (ctrl_inl(INTEVT) >> 5) - 16; #else - "mov.l @%1, %0\n\t" -#endif - "shlr2 %0\n\t" - "shlr2 %0\n\t" - "shlr %0\n\t" - "add #-16, %0\n\t" - : "=z" (irq), "=r" (r4) - : "1" (INTEVT) - : "memory" - ); + irq = r4; #endif irq = irq_demux(irq); @@ -139,25 +137,25 @@ asmlinkage int do_IRQ(unsigned long r4, unsigned long r5, __asm__ __volatile__ ( "mov %0, r4 \n" - "mov %1, r5 \n" "mov r15, r9 \n" - "jsr @%2 \n" + "jsr @%1 \n" /* swith to the irq stack */ - " mov %3, r15 \n" + " mov %2, r15 \n" /* restore the stack (ring zero) */ "mov r9, r15 \n" : /* no outputs */ - : "r" (irq), "r" (®s), "r" (__do_IRQ), "r" (isp) + : "r" (irq), "r" (generic_handle_irq), "r" (isp) /* XXX: A somewhat excessive clobber list? -PFM */ : "memory", "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "t", "pr" ); } else #endif - __do_IRQ(irq, ®s); + generic_handle_irq(irq); irq_exit(); + set_irq_regs(old_regs); return 1; } diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 0b1d5dd7a93..a52b13ac6b7 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -5,6 +5,7 @@ * Copyright (C) 1995 Linus Torvalds * * SuperH version: Copyright (C) 1999, 2000 Niibe Yutaka & Kaz Kojima + * Copyright (C) 2006 Lineo Solutions Inc. support SH4A UBC */ /* @@ -104,7 +105,7 @@ void show_regs(struct pt_regs * regs) { printk("\n"); printk("Pid : %d, Comm: %20s\n", current->pid, current->comm); - print_symbol("PC is at %s\n", regs->pc); + print_symbol("PC is at %s\n", instruction_pointer(regs)); printk("PC : %08lx SP : %08lx SR : %08lx ", regs->pc, regs->regs[15], regs->sr); #ifdef CONFIG_MMU @@ -129,15 +130,7 @@ void show_regs(struct pt_regs * regs) printk("MACH: %08lx MACL: %08lx GBR : %08lx PR : %08lx\n", regs->mach, regs->macl, regs->gbr, regs->pr); - /* - * If we're in kernel mode, dump the stack too.. - */ - if (!user_mode(regs)) { - extern void show_task(unsigned long *sp); - unsigned long sp = regs->regs[15]; - - show_task((unsigned long *)sp); - } + show_trace(NULL, (unsigned long *)regs->regs[15], regs); } /* @@ -290,6 +283,24 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long usp, static void ubc_set_tracing(int asid, unsigned long pc) { +#if defined(CONFIG_CPU_SH4A) + unsigned long val; + + val = (UBC_CBR_ID_INST | UBC_CBR_RW_READ | UBC_CBR_CE); + val |= (UBC_CBR_AIE | UBC_CBR_AIV_SET(asid)); + + ctrl_outl(val, UBC_CBR0); + ctrl_outl(pc, UBC_CAR0); + ctrl_outl(0x0, UBC_CAMR0); + ctrl_outl(0x0, UBC_CBCR); + + val = (UBC_CRR_RES | UBC_CRR_PCB | UBC_CRR_BIE); + ctrl_outl(val, UBC_CRR0); + + /* Read UBC register that we writed last. For chekking UBC Register changed */ + val = ctrl_inl(UBC_CRR0); + +#else /* CONFIG_CPU_SH4A */ ctrl_outl(pc, UBC_BARA); #ifdef CONFIG_MMU @@ -307,6 +318,7 @@ ubc_set_tracing(int asid, unsigned long pc) ctrl_outw(BBR_INST | BBR_READ, UBC_BBRA); ctrl_outw(BRCR_PCBA, UBC_BRCR); } +#endif /* CONFIG_CPU_SH4A */ } /* @@ -359,8 +371,13 @@ struct task_struct *__switch_to(struct task_struct *prev, struct task_struct *ne #endif ubc_set_tracing(asid, next->thread.ubc_pc); } else { +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif } return prev; @@ -460,8 +477,13 @@ asmlinkage void break_point_trap(unsigned long r4, unsigned long r5, struct pt_regs regs) { /* Clear tracing. */ +#if defined(CONFIG_CPU_SH4A) + ctrl_outl(UBC_CBR_INIT, UBC_CBR0); + ctrl_outl(UBC_CRR_INIT, UBC_CRR0); +#else ctrl_outw(0, UBC_BBRA); ctrl_outw(0, UBC_BBRB); +#endif current->thread.ubc_pc = 0; ubc_usercnt -= 1; diff --git a/arch/sh/kernel/syscalls.S b/arch/sh/kernel/syscalls.S index 768334e9507..ca81976e9e3 100644 --- a/arch/sh/kernel/syscalls.S +++ b/arch/sh/kernel/syscalls.S @@ -351,3 +351,6 @@ ENTRY(sys_call_table) .long sys_sync_file_range .long sys_tee /* 315 */ .long sys_vmsplice + .long sys_move_pages + .long sys_getcpu + .long sys_epoll_pwait diff --git a/arch/sh/kernel/time.c b/arch/sh/kernel/time.c index 450c68f1df0..57e708d7b52 100644 --- a/arch/sh/kernel/time.c +++ b/arch/sh/kernel/time.c @@ -47,6 +47,7 @@ unsigned long long __attribute__ ((weak)) sched_clock(void) return (unsigned long long)jiffies * (1000000000 / HZ); } +#ifndef CONFIG_GENERIC_TIME void do_gettimeofday(struct timeval *tv) { unsigned long seq; @@ -99,6 +100,7 @@ int do_settimeofday(struct timespec *tv) return 0; } EXPORT_SYMBOL(do_settimeofday); +#endif /* !CONFIG_GENERIC_TIME */ /* last time the RTC clock got updated */ static long last_rtc_update; @@ -107,13 +109,14 @@ static long last_rtc_update; * handle_timer_tick() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -void handle_timer_tick(struct pt_regs *regs) +void handle_timer_tick(void) { do_timer(1); #ifndef CONFIG_SMP - update_process_times(user_mode(regs)); + update_process_times(user_mode(get_irq_regs())); #endif - profile_tick(CPU_PROFILING, regs); + if (current->pid) + profile_tick(CPU_PROFILING); #ifdef CONFIG_HEARTBEAT if (sh_mv.mv_heartbeat != NULL) diff --git a/arch/sh/kernel/timers/timer-tmu.c b/arch/sh/kernel/timers/timer-tmu.c index 205816fcf0d..24927015dc3 100644 --- a/arch/sh/kernel/timers/timer-tmu.c +++ b/arch/sh/kernel/timers/timer-tmu.c @@ -80,8 +80,7 @@ static unsigned long tmu_timer_get_offset(void) return count; } -static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, - struct pt_regs *regs) +static irqreturn_t tmu_timer_interrupt(int irq, void *dummy) { unsigned long timer_status; @@ -98,7 +97,7 @@ static irqreturn_t tmu_timer_interrupt(int irq, void *dev_id, * locally disabled. -arca */ write_seqlock(&xtime_lock); - handle_timer_tick(regs); + handle_timer_tick(); write_sequnlock(&xtime_lock); return IRQ_HANDLED; @@ -111,60 +110,6 @@ static struct irqaction tmu_irq = { .mask = CPU_MASK_NONE, }; -/* - * Hah! We'll see if this works (switching from usecs to nsecs). - */ -static unsigned long tmu_timer_get_frequency(void) -{ - u32 freq; - struct timespec ts1, ts2; - unsigned long diff_nsec; - unsigned long factor; - - /* Setup the timer: We don't want to generate interrupts, just - * have it count down at its natural rate. - */ - ctrl_outb(0, TMU_TSTR); -#if !defined(CONFIG_CPU_SUBTYPE_SH7300) && !defined(CONFIG_CPU_SUBTYPE_SH7760) - ctrl_outb(TMU_TOCR_INIT, TMU_TOCR); -#endif - ctrl_outw(TMU0_TCR_CALIB, TMU0_TCR); - ctrl_outl(0xffffffff, TMU0_TCOR); - ctrl_outl(0xffffffff, TMU0_TCNT); - - rtc_sh_get_time(&ts2); - - do { - rtc_sh_get_time(&ts1); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - /* actually start the timer */ - ctrl_outb(TMU_TSTR_INIT, TMU_TSTR); - - do { - rtc_sh_get_time(&ts2); - } while (ts1.tv_nsec == ts2.tv_nsec && ts1.tv_sec == ts2.tv_sec); - - freq = 0xffffffff - ctrl_inl(TMU0_TCNT); - if (ts2.tv_nsec < ts1.tv_nsec) { - ts2.tv_nsec += 1000000000; - ts2.tv_sec--; - } - - diff_nsec = (ts2.tv_sec - ts1.tv_sec) * 1000000000 + (ts2.tv_nsec - ts1.tv_nsec); - - /* this should work well if the RTC has a precision of n Hz, where - * n is an integer. I don't think we have to worry about the other - * cases. */ - factor = (1000000000 + diff_nsec/2) / diff_nsec; - - if (factor * diff_nsec > 1100000000 || - factor * diff_nsec < 900000000) - panic("weird RTC (diff_nsec %ld)", diff_nsec); - - return freq * factor; -} - static void tmu_clk_init(struct clk *clk) { u8 divisor = TMU0_TCR_INIT & 0x7; @@ -232,12 +177,12 @@ struct sys_timer_ops tmu_timer_ops = { .init = tmu_timer_init, .start = tmu_timer_start, .stop = tmu_timer_stop, - .get_frequency = tmu_timer_get_frequency, +#ifndef CONFIG_GENERIC_TIME .get_offset = tmu_timer_get_offset, +#endif }; struct sys_timer tmu_timer = { .name = "tmu", .ops = &tmu_timer_ops, }; - diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c index c2c597e0948..53dfa55f315 100644 --- a/arch/sh/kernel/traps.c +++ b/arch/sh/kernel/traps.c @@ -1,38 +1,25 @@ -/* $Id: traps.c,v 1.17 2004/05/02 01:46:30 sugioka Exp $ - * - * linux/arch/sh/traps.c +/* + * 'traps.c' handles hardware traps and faults after we have saved some + * state in 'entry.S'. * * SuperH version: Copyright (C) 1999 Niibe Yutaka * Copyright (C) 2000 Philipp Rumpf * Copyright (C) 2000 David Howells - * Copyright (C) 2002, 2003 Paul Mundt - */ - -/* - * 'Traps.c' handles hardware traps and faults after we have saved some - * state in 'entry.S'. + * Copyright (C) 2002 - 2006 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. */ -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/string.h> -#include <linux/errno.h> #include <linux/ptrace.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> #include <linux/init.h> -#include <linux/delay.h> #include <linux/spinlock.h> #include <linux/module.h> #include <linux/kallsyms.h> - +#include <linux/io.h> #include <asm/system.h> #include <asm/uaccess.h> -#include <asm/io.h> -#include <asm/atomic.h> -#include <asm/processor.h> -#include <asm/sections.h> #ifdef CONFIG_SH_KGDB #include <asm/kgdb.h> @@ -53,13 +40,32 @@ #define TRAP_ILLEGAL_SLOT_INST 13 #endif -/* - * These constants are for searching for possible module text - * segments. VMALLOC_OFFSET comes from mm/vmalloc.c; MODULE_RANGE is - * a guess of how much space is likely to be vmalloced. - */ -#define VMALLOC_OFFSET (8*1024*1024) -#define MODULE_RANGE (8*1024*1024) +static void dump_mem(const char *str, unsigned long bottom, unsigned long top) +{ + unsigned long p; + int i; + + printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top); + + for (p = bottom & ~31; p < top; ) { + printk("%04lx: ", p & 0xffff); + + for (i = 0; i < 8; i++, p += 4) { + unsigned int val; + + if (p < bottom || p >= top) + printk(" "); + else { + if (__get_user(val, (unsigned int __user *)p)) { + printk("\n"); + return; + } + printk("%08x ", val); + } + } + printk("\n"); + } +} DEFINE_SPINLOCK(die_lock); @@ -69,14 +75,28 @@ void die(const char * str, struct pt_regs * regs, long err) console_verbose(); spin_lock_irq(&die_lock); + bust_spinlocks(1); + printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter); + CHK_REMOTE_DEBUG(regs); + print_modules(); show_regs(regs); + + printk("Process: %s (pid: %d, stack limit = %p)\n", + current->comm, current->pid, task_stack_page(current) + 1); + + if (!user_mode(regs) || in_interrupt()) + dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + + (unsigned long)task_stack_page(current)); + + bust_spinlocks(0); spin_unlock_irq(&die_lock); do_exit(SIGSEGV); } -static inline void die_if_kernel(const char * str, struct pt_regs * regs, long err) +static inline void die_if_kernel(const char *str, struct pt_regs *regs, + long err) { if (!user_mode(regs)) die(str, regs, err); @@ -93,8 +113,7 @@ static int handle_unaligned_notify_count = 10; */ static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) { - if (!user_mode(regs)) - { + if (!user_mode(regs)) { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->pc); if (fixup) { @@ -550,7 +569,10 @@ int is_dsp_inst(struct pt_regs *regs) #define is_dsp_inst(regs) (0) #endif /* CONFIG_SH_DSP */ -extern int do_fpu_inst(unsigned short, struct pt_regs*); +/* arch/sh/kernel/cpu/sh4/fpu.c */ +extern int do_fpu_inst(unsigned short, struct pt_regs *); +extern asmlinkage void do_fpu_state_restore(unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7, struct pt_regs regs); asmlinkage void do_reserved_inst(unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7, @@ -709,14 +731,20 @@ void __init per_cpu_trap_init(void) : "memory"); } -void __init trap_init(void) +void *set_exception_table_vec(unsigned int vec, void *handler) { extern void *exception_handling_table[]; + void *old_handler; + + old_handler = exception_handling_table[vec]; + exception_handling_table[vec] = handler; + return old_handler; +} - exception_handling_table[TRAP_RESERVED_INST] - = (void *)do_reserved_inst; - exception_handling_table[TRAP_ILLEGAL_SLOT_INST] - = (void *)do_illegal_slot_inst; +void __init trap_init(void) +{ + set_exception_table_vec(TRAP_RESERVED_INST, do_reserved_inst); + set_exception_table_vec(TRAP_ILLEGAL_SLOT_INST, do_illegal_slot_inst); #if defined(CONFIG_CPU_SH4) && !defined(CONFIG_SH_FPU) || \ defined(CONFIG_SH_FPU_EMU) @@ -725,61 +753,54 @@ void __init trap_init(void) * reserved. They'll be handled in the math-emu case, or faulted on * otherwise. */ - /* entry 64 corresponds to EXPEVT=0x800 */ - exception_handling_table[64] = (void *)do_reserved_inst; - exception_handling_table[65] = (void *)do_illegal_slot_inst; + set_exception_table_evt(0x800, do_reserved_inst); + set_exception_table_evt(0x820, do_illegal_slot_inst); +#elif defined(CONFIG_SH_FPU) + set_exception_table_evt(0x800, do_fpu_state_restore); + set_exception_table_evt(0x820, do_fpu_state_restore); #endif /* Setup VBR for boot cpu */ per_cpu_trap_init(); } -void show_stack(struct task_struct *tsk, unsigned long *sp) +void show_trace(struct task_struct *tsk, unsigned long *sp, + struct pt_regs *regs) { - unsigned long *stack, addr; - unsigned long module_start = VMALLOC_START; - unsigned long module_end = VMALLOC_END; - int i = 1; - - if (!tsk) - tsk = current; - if (tsk == current) - sp = (unsigned long *)current_stack_pointer; - else - sp = (unsigned long *)tsk->thread.sp; + unsigned long addr; - stack = sp; + if (regs && user_mode(regs)) + return; printk("\nCall trace: "); #ifdef CONFIG_KALLSYMS printk("\n"); #endif - while (!kstack_end(stack)) { - addr = *stack++; - if (((addr >= (unsigned long)_text) && - (addr <= (unsigned long)_etext)) || - ((addr >= module_start) && (addr <= module_end))) { - /* - * For 80-columns display, 6 entry is maximum. - * NOTE: '[<8c00abcd>] ' consumes 13 columns . - */ -#ifndef CONFIG_KALLSYMS - if (i && ((i % 6) == 0)) - printk("\n "); -#endif - printk("[<%08lx>] ", addr); - print_symbol("%s\n", addr); - i++; - } + while (!kstack_end(sp)) { + addr = *sp++; + if (kernel_text_address(addr)) + print_ip_sym(addr); } printk("\n"); } -void show_task(unsigned long *sp) +void show_stack(struct task_struct *tsk, unsigned long *sp) { - show_stack(NULL, sp); + unsigned long stack; + + if (!tsk) + tsk = current; + if (tsk == current) + sp = (unsigned long *)current_stack_pointer; + else + sp = (unsigned long *)tsk->thread.sp; + + stack = (unsigned long)sp; + dump_mem("Stack: ", stack, THREAD_SIZE + + (unsigned long)task_stack_page(tsk)); + show_trace(tsk, sp, NULL); } void dump_stack(void) diff --git a/arch/sh/kernel/vmlinux.lds.S b/arch/sh/kernel/vmlinux.lds.S index 5eb93091818..77b4026d568 100644 --- a/arch/sh/kernel/vmlinux.lds.S +++ b/arch/sh/kernel/vmlinux.lds.S @@ -76,13 +76,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c index c81e6b67ad3..38c82d890ff 100644 --- a/arch/sh/mm/consistent.c +++ b/arch/sh/mm/consistent.c @@ -28,6 +28,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle) split_page(page, order); ret = page_address(page); + memset(ret, 0, size); *handle = virt_to_phys(ret); /* diff --git a/arch/sh64/kernel/vmlinux.lds.S b/arch/sh64/kernel/vmlinux.lds.S index a8fcc3a7158..95c4d753e35 100644 --- a/arch/sh64/kernel/vmlinux.lds.S +++ b/arch/sh64/kernel/vmlinux.lds.S @@ -108,13 +108,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : C_PHYS(.initcall.init) { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 9431e967aa4..2f96610a83e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -289,6 +289,13 @@ endmenu source "fs/Kconfig" +menu "Instrumentation Support" + depends on EXPERIMENTAL + +source "arch/sparc/oprofile/Kconfig" + +endmenu + source "arch/sparc/Kconfig.debug" source "security/Kconfig" diff --git a/arch/sparc/Makefile b/arch/sparc/Makefile index 4cdbb2d59ed..f33c3817f01 100644 --- a/arch/sparc/Makefile +++ b/arch/sparc/Makefile @@ -30,6 +30,8 @@ HEAD_Y := $(head-y) core-y += arch/sparc/kernel/ arch/sparc/mm/ arch/sparc/math-emu/ libs-y += arch/sparc/prom/ arch/sparc/lib/ +drivers-$(CONFIG_OPROFILE) += arch/sparc/oprofile/ + # Export what is needed by arch/sparc/boot/Makefile # Renaming is done to avoid confusing pattern matching rules in 2.5.45 (multy-) INIT_Y := $(patsubst %/, %/built-in.o, $(init-y)) diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c index 75ac24d229b..ba58c3a061f 100644 --- a/arch/sparc/kernel/ebus.c +++ b/arch/sparc/kernel/ebus.c @@ -237,12 +237,12 @@ void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_device *d dev->ofdev.node = dp; dev->ofdev.dev.parent = &dev->bus->ofdev.dev; dev->ofdev.dev.bus = &ebus_bus_type; - strcpy(dev->ofdev.dev.bus_id, dp->path_component_name); + sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node); /* Register with core */ if (of_device_register(&dev->ofdev) != 0) printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dev->ofdev.dev.bus_id); + dp->path_component_name); if ((dp = dp->child) != NULL) { dev->children = (struct linux_ebus_child *) @@ -332,12 +332,12 @@ void __init ebus_init(void) ebus->ofdev.node = dp; ebus->ofdev.dev.parent = &pdev->dev; ebus->ofdev.dev.bus = &ebus_bus_type; - strcpy(ebus->ofdev.dev.bus_id, dp->path_component_name); + sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus); /* Register with core */ if (of_device_register(&ebus->ofdev) != 0) printk(KERN_DEBUG "ebus: device registration error for %s!\n", - ebus->ofdev.dev.bus_id); + dp->path_component_name); nd = dp->child; diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index a4edff4c3be..831f540251f 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -32,13 +32,12 @@ #include <asm/mxcc.h> #include <asm/thread_info.h> #include <asm/param.h> +#include <asm/unistd.h> #include <asm/asmmacro.h> #define curptr g6 -#define NR_SYSCALLS 300 /* Each OS is different... */ - /* These are just handy. */ #define _SV save %sp, -STACKFRAME_SZ, %sp #define _RS restore diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c index b3b6680a2a3..c8cb211b907 100644 --- a/arch/sparc/kernel/irq.c +++ b/arch/sparc/kernel/irq.c @@ -351,7 +351,7 @@ void handler_irq(int irq, struct pt_regs * regs) } #ifdef CONFIG_BLK_DEV_FD -extern void floppy_interrupt(int irq, void *dev_id) +extern void floppy_interrupt(int irq, void *dev_id); void sparc_floppy_irq(int irq, void *dev_id, struct pt_regs *regs) { diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index 74bef2a2d37..46200c43ffb 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -651,7 +651,7 @@ build_resources: if (!parent) strcpy(op->dev.bus_id, "root"); else - strcpy(op->dev.bus_id, dp->path_component_name); + sprintf(op->dev.bus_id, "%08x", dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index b4e50ae323b..207f1b6eef5 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -34,6 +34,7 @@ #include <asm/pcic.h> #include <asm/timer.h> #include <asm/uaccess.h> +#include <asm/irq_regs.h> unsigned int pcic_pin_to_irq(unsigned int pin, char *name); diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 0251cab4708..383526ad94f 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -103,7 +103,6 @@ void prom_sync_me(void) unsigned int boot_flags __initdata = 0; #define BOOTME_DEBUG 0x1 -#define BOOTME_SINGLE 0x2 /* Exported for mm/init.c:paging_init. */ unsigned long cmdline_memory_size __initdata = 0; @@ -121,16 +120,6 @@ static struct console prom_debug_console = { .index = -1, }; -int obp_system_intr(void) -{ - if (boot_flags & BOOTME_DEBUG) { - printk("OBP: system interrupted\n"); - prom_halt(); - return 1; - } - return 0; -} - /* * Process kernel command line switches that are specific to the * SPARC or that require special low-level processing. @@ -142,7 +131,6 @@ static void __init process_switch(char c) boot_flags |= BOOTME_DEBUG; break; case 's': - boot_flags |= BOOTME_SINGLE; break; case 'h': prom_printf("boot_flags_init: Halt!\n"); diff --git a/arch/sparc/kernel/systbls.S b/arch/sparc/kernel/systbls.S index 10df38eeae0..ea75ca56905 100644 --- a/arch/sparc/kernel/systbls.S +++ b/arch/sparc/kernel/systbls.S @@ -78,7 +78,7 @@ sys_call_table: /*285*/ .long sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64 /*290*/ .long sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat /*295*/ .long sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare -/*300*/ .long sys_set_robust_list, sys_get_robust_list +/*300*/ .long sys_set_robust_list, sys_get_robust_list, sys_migrate_pages #ifdef CONFIG_SUNOS_EMUL /* Now the SunOS syscall table. */ @@ -190,6 +190,7 @@ sunos_sys_table: /*290*/ .long sunos_nosys, sunos_nosys, sunos_nosys .long sunos_nosys, sunos_nosys, sunos_nosys .long sunos_nosys, sunos_nosys, sunos_nosys - .long sunos_nosys, sunos_nosys, sunos_nosys + .long sunos_nosys +/*300*/ .long sunos_nosys, sunos_nosys, sunos_nosys #endif diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 7dcd1a16c6e..6c7aa51b590 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -95,6 +95,8 @@ unsigned long profile_pc(struct pt_regs *regs) return pc; } +EXPORT_SYMBOL(profile_pc); + __volatile__ unsigned int *master_l10_counter; __volatile__ unsigned int *master_l10_limit; diff --git a/arch/sparc/kernel/vmlinux.lds.S b/arch/sparc/kernel/vmlinux.lds.S index 346c19a949f..5cc5ff7f882 100644 --- a/arch/sparc/kernel/vmlinux.lds.S +++ b/arch/sparc/kernel/vmlinux.lds.S @@ -36,11 +36,11 @@ SECTIONS . = ALIGN(4096); __init_begin = .; + _sinittext = .; .init.text : { - _sinittext = .; *(.init.text) - _einittext = .; } + _einittext = .; __init_text_end = .; .init.data : { *(.init.data) } . = ALIGN(16); @@ -49,13 +49,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index b27a506309e..0df7121cef0 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -402,7 +402,7 @@ void srmmu_nocache_calcsize(void) srmmu_nocache_end = SRMMU_NOCACHE_VADDR + srmmu_nocache_size; } -void srmmu_nocache_init(void) +void __init srmmu_nocache_init(void) { unsigned int bitmap_bits; pgd_t *pgd; diff --git a/arch/sparc/oprofile/Kconfig b/arch/sparc/oprofile/Kconfig new file mode 100644 index 00000000000..d8a84088471 --- /dev/null +++ b/arch/sparc/oprofile/Kconfig @@ -0,0 +1,17 @@ +config PROFILING + bool "Profiling support (EXPERIMENTAL)" + help + Say Y here to enable the extended profiling support mechanisms used + by profilers such as OProfile. + + +config OPROFILE + tristate "OProfile system profiling (EXPERIMENTAL)" + depends on PROFILING + help + OProfile is a profiling system capable of profiling the + whole system, include the kernel, kernel modules, libraries, + and applications. + + If unsure, say N. + diff --git a/arch/sparc/oprofile/Makefile b/arch/sparc/oprofile/Makefile new file mode 100644 index 00000000000..e9feca1ca28 --- /dev/null +++ b/arch/sparc/oprofile/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_OPROFILE) += oprofile.o + +DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \ + oprof.o cpu_buffer.o buffer_sync.o \ + event_buffer.o oprofile_files.o \ + oprofilefs.o oprofile_stats.o \ + timer_int.o ) + +oprofile-y := $(DRIVER_OBJS) init.o diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c new file mode 100644 index 00000000000..9ab815b95b5 --- /dev/null +++ b/arch/sparc/oprofile/init.c @@ -0,0 +1,23 @@ +/** + * @file init.c + * + * @remark Copyright 2002 OProfile authors + * @remark Read the file COPYING + * + * @author John Levon <levon@movementarian.org> + */ + +#include <linux/kernel.h> +#include <linux/oprofile.h> +#include <linux/errno.h> +#include <linux/init.h> + +int __init oprofile_arch_init(struct oprofile_operations * ops) +{ + return -ENODEV; +} + + +void oprofile_arch_exit(void) +{ +} diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig index dcae559879a..2f4612fa81f 100644 --- a/arch/sparc64/defconfig +++ b/arch/sparc64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Thu Oct 5 02:08:41 2006 +# Linux kernel version: 2.6.19-rc2 +# Tue Oct 17 19:29:20 2006 # CONFIG_SPARC=y CONFIG_SPARC64=y @@ -217,6 +217,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set @@ -334,6 +335,12 @@ CONFIG_CDROM_PKTCDVD_WCACHE=y CONFIG_ATA_OVER_ETH=m # +# Misc devices +# +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y @@ -728,7 +735,6 @@ CONFIG_RTC=y # TPM devices # # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set # # I2C support @@ -842,11 +848,6 @@ CONFIG_HWMON=y # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1104,7 +1105,6 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1150,6 +1150,7 @@ CONFIG_USB_HIDDEV=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1234,6 +1235,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1362,10 +1364,6 @@ CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_UTF8 is not set # -# Distributed Lock Manager -# - -# # Instrumentation Support # CONFIG_PROFILING=y @@ -1399,6 +1397,7 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_LIST is not set # CONFIG_UNWIND_INFO is not set CONFIG_FORCED_INLINING=y +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set # CONFIG_DEBUG_STACK_USAGE is not set diff --git a/arch/sparc64/kernel/central.c b/arch/sparc64/kernel/central.c index b66336db00e..e724c54af02 100644 --- a/arch/sparc64/kernel/central.c +++ b/arch/sparc64/kernel/central.c @@ -126,6 +126,10 @@ static void probe_other_fhcs(void) int board; u32 tmp; + if (dp->parent && + dp->parent->parent != NULL) + continue; + fhc = (struct linux_fhc *) central_alloc_bootmem(sizeof(struct linux_fhc)); if (fhc == NULL) diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c index 2df25c2b407..35bf895fdee 100644 --- a/arch/sparc64/kernel/ebus.c +++ b/arch/sparc64/kernel/ebus.c @@ -389,12 +389,12 @@ static void __init fill_ebus_device(struct device_node *dp, struct linux_ebus_de dev->ofdev.node = dp; dev->ofdev.dev.parent = &dev->bus->ofdev.dev; dev->ofdev.dev.bus = &ebus_bus_type; - strcpy(dev->ofdev.dev.bus_id, dp->path_component_name); + sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node); /* Register with core */ if (of_device_register(&dev->ofdev) != 0) printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dev->ofdev.dev.bus_id); + dp->path_component_name); dp = dp->child; if (dp) { @@ -494,12 +494,12 @@ void __init ebus_init(void) ebus->ofdev.node = dp; ebus->ofdev.dev.parent = &pdev->dev; ebus->ofdev.dev.bus = &ebus_bus_type; - strcpy(ebus->ofdev.dev.bus_id, dp->path_component_name); + sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus); /* Register with core */ if (of_device_register(&ebus->ofdev) != 0) printk(KERN_DEBUG "ebus: device registration error for %s!\n", - ebus->ofdev.dev.bus_id); + dp->path_component_name); child = dp->child; diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 0aaa35fc5a9..6f28bec0a9b 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -22,11 +22,10 @@ #include <asm/auxio.h> #include <asm/sfafsr.h> #include <asm/pil.h> +#include <asm/unistd.h> #define curptr g6 -#define NR_SYSCALLS 300 /* Each OS is different... */ - .text .align 32 diff --git a/arch/sparc64/kernel/isa.c b/arch/sparc64/kernel/isa.c index 0f3aec72ef5..f028e68b23f 100644 --- a/arch/sparc64/kernel/isa.c +++ b/arch/sparc64/kernel/isa.c @@ -115,12 +115,12 @@ static void __init isa_fill_devices(struct sparc_isa_bridge *isa_br) isa_dev->ofdev.node = dp; isa_dev->ofdev.dev.parent = &isa_br->ofdev.dev; isa_dev->ofdev.dev.bus = &isa_bus_type; - strcpy(isa_dev->ofdev.dev.bus_id, dp->path_component_name); + sprintf(isa_dev->ofdev.dev.bus_id, "isa[%08x]", dp->node); /* Register with core */ if (of_device_register(&isa_dev->ofdev) != 0) { printk(KERN_DEBUG "isa: device registration error for %s!\n", - isa_dev->ofdev.dev.bus_id); + dp->path_component_name); kfree(isa_dev); goto next_sibling; } @@ -191,12 +191,12 @@ void __init isa_init(void) isa_br->ofdev.node = dp; isa_br->ofdev.dev.parent = &pdev->dev; isa_br->ofdev.dev.bus = &isa_bus_type; - strcpy(isa_br->ofdev.dev.bus_id, dp->path_component_name); + sprintf(isa_br->ofdev.dev.bus_id, "isa%d", index); /* Register with core */ if (of_device_register(&isa_br->ofdev) != 0) { printk(KERN_DEBUG "isa: device registration error for %s!\n", - isa_br->ofdev.dev.bus_id); + dp->path_component_name); kfree(isa_br); return; } diff --git a/arch/sparc64/kernel/of_device.c b/arch/sparc64/kernel/of_device.c index d822c7c18e1..8cc14fc6b6f 100644 --- a/arch/sparc64/kernel/of_device.c +++ b/arch/sparc64/kernel/of_device.c @@ -131,8 +131,13 @@ static int of_device_resume(struct device * dev) void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name) { unsigned long ret = res->start + offset; + struct resource *r; - if (!request_region(ret, size, name)) + if (res->flags & IORESOURCE_MEM) + r = request_mem_region(ret, size, name); + else + r = request_region(ret, size, name); + if (!r) ret = 0; return (void __iomem *) ret; @@ -397,16 +402,22 @@ static void of_bus_sbus_count_cells(struct device_node *child, *sizec = 1; } -static int of_bus_sbus_map(u32 *addr, const u32 *range, int na, int ns, int pna) -{ - return of_bus_default_map(addr, range, na, ns, pna); -} - -static unsigned int of_bus_sbus_get_flags(u32 *addr) +/* + * FHC/Central bus specific translator. + * + * This is just needed to hard-code the address and size cell + * counts. 'fhc' and 'central' nodes lack the #address-cells and + * #size-cells properties, and if you walk to the root on such + * Enterprise boxes all you'll get is a #size-cells of 2 which is + * not what we want to use. + */ +static int of_bus_fhc_match(struct device_node *np) { - return IORESOURCE_MEM; + return !strcmp(np->name, "fhc") || + !strcmp(np->name, "central"); } +#define of_bus_fhc_count_cells of_bus_sbus_count_cells /* * Array of bus specific translators @@ -428,8 +439,17 @@ static struct of_bus of_busses[] = { .addr_prop_name = "reg", .match = of_bus_sbus_match, .count_cells = of_bus_sbus_count_cells, - .map = of_bus_sbus_map, - .get_flags = of_bus_sbus_get_flags, + .map = of_bus_default_map, + .get_flags = of_bus_default_get_flags, + }, + /* FHC */ + { + .name = "fhc", + .addr_prop_name = "reg", + .match = of_bus_fhc_match, + .count_cells = of_bus_fhc_count_cells, + .map = of_bus_default_map, + .get_flags = of_bus_default_get_flags, }, /* Default */ { @@ -841,7 +861,7 @@ static struct of_device * __init scan_one_device(struct device_node *dp, if (!parent) strcpy(op->dev.bus_id, "root"); else - sprintf(op->dev.bus_id, "%s@%08x", dp->name, dp->node); + sprintf(op->dev.bus_id, "%08x", dp->node); if (of_device_register(op)) { printk("%s: Could not register of device.\n", diff --git a/arch/sparc64/kernel/pci_common.c b/arch/sparc64/kernel/pci_common.c index 7a59cc72c84..827ae30aa49 100644 --- a/arch/sparc64/kernel/pci_common.c +++ b/arch/sparc64/kernel/pci_common.c @@ -330,19 +330,6 @@ __init get_device_resource(struct linux_prom_pci_registers *ap, return res; } -static int __init pdev_resource_collisions_expected(struct pci_dev *pdev) -{ - if (pdev->vendor != PCI_VENDOR_ID_SUN) - return 0; - - if (pdev->device == PCI_DEVICE_ID_SUN_RIO_EBUS || - pdev->device == PCI_DEVICE_ID_SUN_RIO_1394 || - pdev->device == PCI_DEVICE_ID_SUN_RIO_USB) - return 1; - - return 0; -} - static void __init pdev_record_assignments(struct pci_pbm_info *pbm, struct pci_dev *pdev) { @@ -400,19 +387,23 @@ static void __init pdev_record_assignments(struct pci_pbm_info *pbm, pbm->parent->resource_adjust(pdev, res, root); if (request_resource(root, res) < 0) { + int rnum; + /* OK, there is some conflict. But this is fine * since we'll reassign it in the fixup pass. * - * We notify the user that OBP made an error if it - * is a case we don't expect. + * Do not print the warning for ROM resources + * as such a conflict is quite common and + * harmless as the ROM bar is disabled. */ - if (!pdev_resource_collisions_expected(pdev)) { - printk(KERN_ERR "PCI: Address space collision on region %ld " + rnum = (res - &pdev->resource[0]); + if (rnum != PCI_ROM_RESOURCE) + printk(KERN_ERR "PCI: Resource collision, " + "region %d " "[%016lx:%016lx] of device %s\n", - (res - &pdev->resource[0]), + rnum, res->start, res->end, pci_name(pdev)); - } } } } diff --git a/arch/sparc64/kernel/pci_iommu.c b/arch/sparc64/kernel/pci_iommu.c index 82e5455134c..2e7f1427088 100644 --- a/arch/sparc64/kernel/pci_iommu.c +++ b/arch/sparc64/kernel/pci_iommu.c @@ -281,7 +281,7 @@ static void pci_4u_free_consistent(struct pci_dev *pdev, size_t size, void *cpu, spin_lock_irqsave(&iommu->lock, flags); - free_npages(iommu, dvma, npages); + free_npages(iommu, dvma - iommu->page_table_map_base, npages); spin_unlock_irqrestore(&iommu->lock, flags); diff --git a/arch/sparc64/kernel/pci_sabre.c b/arch/sparc64/kernel/pci_sabre.c index 6ec569828c2..94bb681f232 100644 --- a/arch/sparc64/kernel/pci_sabre.c +++ b/arch/sparc64/kernel/pci_sabre.c @@ -1196,7 +1196,7 @@ static void pbm_register_toplevel_resources(struct pci_controller_info *p, &pbm->mem_space); } -static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 dma_begin) +static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp, u32 dma_start, u32 dma_end) { struct pci_pbm_info *pbm; struct device_node *node; @@ -1261,6 +1261,8 @@ static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp node = node->sibling; } if (simbas_found == 0) { + struct resource *rp; + /* No APBs underneath, probably this is a hummingbird * system. */ @@ -1302,8 +1304,10 @@ static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp pbm->io_space.end = pbm->io_space.start + (1UL << 24) - 1UL; pbm->io_space.flags = IORESOURCE_IO; - pbm->mem_space.start = p->pbm_A.controller_regs + SABRE_MEMSPACE; - pbm->mem_space.end = pbm->mem_space.start + (unsigned long)dma_begin - 1UL; + pbm->mem_space.start = + (p->pbm_A.controller_regs + SABRE_MEMSPACE); + pbm->mem_space.end = + (pbm->mem_space.start + ((1UL << 32UL) - 1UL)); pbm->mem_space.flags = IORESOURCE_MEM; if (request_resource(&ioport_resource, &pbm->io_space) < 0) { @@ -1315,6 +1319,17 @@ static void sabre_pbm_init(struct pci_controller_info *p, struct device_node *dp prom_halt(); } + rp = kmalloc(sizeof(*rp), GFP_KERNEL); + if (!rp) { + prom_printf("Cannot allocate IOMMU resource.\n"); + prom_halt(); + } + rp->name = "IOMMU"; + rp->start = pbm->mem_space.start + (unsigned long) dma_start; + rp->end = pbm->mem_space.start + (unsigned long) dma_end - 1UL; + rp->flags = IORESOURCE_BUSY; + request_resource(&pbm->mem_space, rp); + pci_register_legacy_regions(&pbm->io_space, &pbm->mem_space); } @@ -1450,5 +1465,5 @@ void sabre_init(struct device_node *dp, char *model_name) /* * Look for APB underneath. */ - sabre_pbm_init(p, dp, vdma[0]); + sabre_pbm_init(p, dp, vdma[0], vdma[0] + vdma[1]); } diff --git a/arch/sparc64/kernel/prom.c b/arch/sparc64/kernel/prom.c index e21cd6afa70..0917c24c4f0 100644 --- a/arch/sparc64/kernel/prom.c +++ b/arch/sparc64/kernel/prom.c @@ -793,7 +793,7 @@ static unsigned int schizo_irq_build(struct device_node *dp, return virt_irq; } -static void schizo_irq_trans_init(struct device_node *dp) +static void __schizo_irq_trans_init(struct device_node *dp, int is_tomatillo) { struct linux_prom64_registers *regs; struct schizo_irq_data *irq_data; @@ -807,11 +807,24 @@ static void schizo_irq_trans_init(struct device_node *dp) dp->irq_trans->data = irq_data; irq_data->pbm_regs = regs[0].phys_addr; - irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL; + if (is_tomatillo) + irq_data->sync_reg = regs[3].phys_addr + 0x1a18UL; + else + irq_data->sync_reg = 0UL; irq_data->portid = of_getintprop_default(dp, "portid", 0); irq_data->chip_version = of_getintprop_default(dp, "version#", 0); } +static void schizo_irq_trans_init(struct device_node *dp) +{ + __schizo_irq_trans_init(dp, 0); +} + +static void tomatillo_irq_trans_init(struct device_node *dp) +{ + __schizo_irq_trans_init(dp, 1); +} + static unsigned int pci_sun4v_irq_build(struct device_node *dp, unsigned int devino, void *_data) @@ -1050,8 +1063,8 @@ static struct irq_trans pci_irq_trans_table[] = { { "pci108e,8001", schizo_irq_trans_init }, { "SUNW,schizo+", schizo_irq_trans_init }, { "pci108e,8002", schizo_irq_trans_init }, - { "SUNW,tomatillo", schizo_irq_trans_init }, - { "pci108e,a801", schizo_irq_trans_init }, + { "SUNW,tomatillo", tomatillo_irq_trans_init }, + { "pci108e,a801", tomatillo_irq_trans_init }, { "SUNW,sun4v-pci", pci_sun4v_irq_trans_init }, }; #endif @@ -1079,23 +1092,22 @@ static void sun4v_vdev_irq_trans_init(struct device_node *dp) static void irq_trans_init(struct device_node *dp) { - const char *model; #ifdef CONFIG_PCI + const char *model; int i; #endif +#ifdef CONFIG_PCI model = of_get_property(dp, "model", NULL); if (!model) model = of_get_property(dp, "compatible", NULL); - if (!model) - return; - -#ifdef CONFIG_PCI - for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) { - struct irq_trans *t = &pci_irq_trans_table[i]; + if (model) { + for (i = 0; i < ARRAY_SIZE(pci_irq_trans_table); i++) { + struct irq_trans *t = &pci_irq_trans_table[i]; - if (!strcmp(model, t->name)) - return t->init(dp); + if (!strcmp(model, t->name)) + return t->init(dp); + } } #endif #ifdef CONFIG_SBUS @@ -1103,8 +1115,9 @@ static void irq_trans_init(struct device_node *dp) !strcmp(dp->name, "sbi")) return sbus_irq_trans_init(dp); #endif - if (!strcmp(dp->name, "central")) - return central_irq_trans_init(dp->child); + if (!strcmp(dp->name, "fhc") && + !strcmp(dp->parent->name, "central")) + return central_irq_trans_init(dp); if (!strcmp(dp->name, "virtual-devices")) return sun4v_vdev_irq_trans_init(dp); } @@ -1516,7 +1529,7 @@ static char * __init get_one_property(phandle node, const char *name) return buf; } -static struct device_node * __init create_node(phandle node) +static struct device_node * __init create_node(phandle node, struct device_node *parent) { struct device_node *dp; @@ -1525,6 +1538,7 @@ static struct device_node * __init create_node(phandle node) dp = prom_early_alloc(sizeof(*dp)); dp->unique_id = unique_id++; + dp->parent = parent; kref_init(&dp->kref); @@ -1543,12 +1557,11 @@ static struct device_node * __init build_tree(struct device_node *parent, phandl { struct device_node *dp; - dp = create_node(node); + dp = create_node(node, parent); if (dp) { *(*nextp) = dp; *nextp = &dp->allnext; - dp->parent = parent; dp->path_component_name = build_path_component(dp); dp->full_name = build_full_name(dp); @@ -1564,7 +1577,7 @@ void __init prom_build_devicetree(void) { struct device_node **nextp; - allnodes = create_node(prom_root_node); + allnodes = create_node(prom_root_node, NULL); allnodes->path_component_name = ""; allnodes->full_name = "/"; diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 958287448cf..bf033b31d43 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -74,7 +74,6 @@ prom_console_write(struct console *con, const char *s, unsigned n) unsigned int boot_flags = 0; #define BOOTME_DEBUG 0x1 -#define BOOTME_SINGLE 0x2 /* Exported for mm/init.c:paging_init. */ unsigned long cmdline_memory_size = 0; @@ -91,16 +90,6 @@ void kernel_enter_debugger(void) { } -int obp_system_intr(void) -{ - if (boot_flags & BOOTME_DEBUG) { - printk("OBP: system interrupted\n"); - prom_halt(); - return 1; - } - return 0; -} - /* * Process kernel command line switches that are specific to the * SPARC or that require special low-level processing. @@ -112,7 +101,6 @@ static void __init process_switch(char c) boot_flags |= BOOTME_DEBUG; break; case 's': - boot_flags |= BOOTME_SINGLE; break; case 'h': prom_printf("boot_flags_init: Halt!\n"); diff --git a/arch/sparc64/kernel/systbls.S b/arch/sparc64/kernel/systbls.S index 419a63fca17..9a8026797ac 100644 --- a/arch/sparc64/kernel/systbls.S +++ b/arch/sparc64/kernel/systbls.S @@ -79,7 +79,7 @@ sys_call_table32: .word sys_mkdirat, sys_mknodat, sys_fchownat, compat_sys_futimesat, compat_sys_fstatat64 /*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat .word sys_fchmodat, sys_faccessat, compat_sys_pselect6, compat_sys_ppoll, sys_unshare -/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list +/*300*/ .word compat_sys_set_robust_list, compat_sys_get_robust_list, compat_sys_migrate_pages #endif /* CONFIG_COMPAT */ @@ -149,7 +149,7 @@ sys_call_table: .word sys_mkdirat, sys_mknodat, sys_fchownat, sys_futimesat, sys_fstatat64 /*290*/ .word sys_unlinkat, sys_renameat, sys_linkat, sys_symlinkat, sys_readlinkat .word sys_fchmodat, sys_faccessat, sys_pselect6, sys_ppoll, sys_unshare -/*300*/ .word sys_set_robust_list, sys_get_robust_list +/*300*/ .word sys_set_robust_list, sys_get_robust_list, sys_migrate_pages #if defined(CONFIG_SUNOS_EMUL) || defined(CONFIG_SOLARIS_EMUL) || \ defined(CONFIG_SOLARIS_EMUL_MODULE) @@ -262,5 +262,7 @@ sunos_sys_table: /*290*/ .word sunos_nosys, sunos_nosys, sunos_nosys .word sunos_nosys, sunos_nosys, sunos_nosys .word sunos_nosys, sunos_nosys, sunos_nosys - .word sunos_nosys, sunos_nosys, sunos_nosys + .word sunos_nosys +/*300*/ .word sunos_nosys, sunos_nosys, sunos_nosys + #endif diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c index 68420e2dad0..fe1796c939c 100644 --- a/arch/sparc64/kernel/traps.c +++ b/arch/sparc64/kernel/traps.c @@ -87,6 +87,7 @@ static void dump_tl1_traplog(struct tl1_traplog *p) i + 1, p->trapstack[i].tstate, p->trapstack[i].tpc, p->trapstack[i].tnpc, p->trapstack[i].tt); + print_symbol("TRAPLOG: TPC<%s>\n", p->trapstack[i].tpc); } } @@ -1134,6 +1135,9 @@ static void cheetah_log_errors(struct pt_regs *regs, struct cheetah_err_info *in printk("%s" "ERROR(%d): TPC[%lx] TNPC[%lx] O7[%lx] TSTATE[%lx]\n", (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(), regs->tpc, regs->tnpc, regs->u_regs[UREG_I7], regs->tstate); + printk("%s" "ERROR(%d): ", + (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id()); + print_symbol("TPC<%s>\n", regs->tpc); printk("%s" "ERROR(%d): M_SYND(%lx), E_SYND(%lx)%s%s\n", (recoverable ? KERN_WARNING : KERN_CRIT), smp_processor_id(), (afsr & CHAFSR_M_SYNDROME) >> CHAFSR_M_SYNDROME_SHIFT, @@ -1741,6 +1745,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs) smp_processor_id(), (type & 0x1) ? 'I' : 'D', regs->tpc); + print_symbol(KERN_EMERG "TPC<%s>\n", regs->tpc); panic("Irrecoverable Cheetah+ parity error."); } @@ -1748,6 +1753,7 @@ void cheetah_plus_parity_error(int type, struct pt_regs *regs) smp_processor_id(), (type & 0x1) ? 'I' : 'D', regs->tpc); + print_symbol(KERN_WARNING "TPC<%s>\n", regs->tpc); } struct sun4v_error_entry { @@ -1946,6 +1952,7 @@ void sun4v_itlb_error_report(struct pt_regs *regs, int tl) printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); + print_symbol(KERN_EMERG "SUN4V-ITLB: TPC<%s>\n", regs->tpc); printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] " "pte[%lx] error[%lx]\n", sun4v_err_itlb_vaddr, sun4v_err_itlb_ctx, @@ -1966,6 +1973,7 @@ void sun4v_dtlb_error_report(struct pt_regs *regs, int tl) printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n", regs->tpc, tl); + print_symbol(KERN_EMERG "SUN4V-DTLB: TPC<%s>\n", regs->tpc); printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] " "pte[%lx] error[%lx]\n", sun4v_err_dtlb_vaddr, sun4v_err_dtlb_ctx, diff --git a/arch/sparc64/kernel/vmlinux.lds.S b/arch/sparc64/kernel/vmlinux.lds.S index b097379a49a..bd9de8c2a2a 100644 --- a/arch/sparc64/kernel/vmlinux.lds.S +++ b/arch/sparc64/kernel/vmlinux.lds.S @@ -57,13 +57,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/um/Kconfig b/arch/um/Kconfig index d75307589d7..5ac1f2963ae 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -1,3 +1,8 @@ +config DEFCONFIG_LIST + string + option defconfig_list + default "arch/$ARCH/defconfig" + # UML uses the generic IRQ sugsystem config GENERIC_HARDIRQS bool @@ -25,6 +30,19 @@ config PCI config PCMCIA bool +# Yet to do! +config TRACE_IRQFLAGS_SUPPORT + bool + default n + +config LOCKDEP_SUPPORT + bool + default y + +config STACKTRACE_SUPPORT + bool + default y + config GENERIC_CALIBRATE_DELAY bool default y @@ -37,13 +55,16 @@ config IRQ_RELEASE_METHOD menu "UML-specific options" config MODE_TT - bool "Tracing thread support" + bool "Tracing thread support (DEPRECATED)" default n + depends on BROKEN help This option controls whether tracing thread support is compiled - into UML. This option is largely obsolete, given that skas0 provides + into UML. This option is largely obsolete, given that skas0 provides skas security and performance without needing to patch the host. - It is safe to say 'N' here. + It is safe to say 'N' here; saying 'Y' may cause additional problems + with the resulting binary even if you run UML in SKAS mode, and running + in TT mode is strongly *NOT RECOMMENDED*. config STATIC_LINK bool "Force a static link" @@ -56,6 +77,9 @@ config STATIC_LINK for use in a chroot jail. So, if you intend to run UML inside a chroot, and you disable CONFIG_MODE_TT, you probably want to say Y here. + Additionally, this option enables using higher memory spaces (up to + 2.75G) for UML - disabling CONFIG_MODE_TT and enabling this option leads + to best results for this. config KERNEL_HALF_GIGS int "Kernel address space size (in .5G units)" @@ -72,10 +96,13 @@ config MODE_SKAS default y help This option controls whether skas (separate kernel address space) - support is compiled in. If you have applied the skas patch to the - host, then you certainly want to say Y here (and consider saying N - to CONFIG_MODE_TT). Otherwise, it is safe to say Y. Disabling this - option will shrink the UML binary slightly. + support is compiled in. + Unless you have specific needs to use TT mode (which applies almost only + to developers), you should say Y here. + SKAS mode will make use of the SKAS3 patch if it is applied on the host + (and your UML will run in SKAS3 mode), but if no SKAS patch is applied + on the host it will run in SKAS0 mode, which is anyway faster than TT + mode. source "arch/um/Kconfig.arch" source "mm/Kconfig" diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char index 62d87b71179..e03e40c7aac 100644 --- a/arch/um/Kconfig.char +++ b/arch/um/Kconfig.char @@ -190,6 +190,11 @@ config HOSTAUDIO tristate default UML_SOUND +#It is selected elsewhere, so kconfig would warn without this. +config HW_RANDOM + tristate + default n + config UML_RANDOM tristate "Hardware random number generator" help diff --git a/arch/um/Kconfig.i386 b/arch/um/Kconfig.i386 index f6eb72d117b..f191a550a07 100644 --- a/arch/um/Kconfig.i386 +++ b/arch/um/Kconfig.i386 @@ -16,23 +16,42 @@ config SEMAPHORE_SLEEPERS bool default y -config HOST_2G_2G - bool "2G/2G host address space split" - default n - help - This is needed when the host on which you run has a 2G/2G memory - split, instead of the customary 3G/1G. - - Note that to enable such a host - configuration, which makes sense only in some cases, you need special - host patches. - - So, if you do not know what to do here, say 'N'. +choice + prompt "Host memory split" + default HOST_VMSPLIT_3G + ---help--- + This is needed when the host kernel on which you run has a non-default + (like 2G/2G) memory split, instead of the customary 3G/1G. If you did + not recompile your own kernel but use the default distro's one, you can + safely accept the "Default split" option. + + It can be enabled on recent (>=2.6.16-rc2) vanilla kernels via + CONFIG_VM_SPLIT_*, or on previous kernels with special patches (-ck + patchset by Con Kolivas, or other ones) - option names match closely the + host CONFIG_VM_SPLIT_* ones. + + A lower setting (where 1G/3G is lowest and 3G/1G is higher) will + tolerate even more "normal" host kernels, but an higher setting will be + stricter. + + So, if you do not know what to do here, say 'Default split'. + + config HOST_VMSPLIT_3G + bool "Default split (3G/1G user/kernel host split)" + config HOST_VMSPLIT_3G_OPT + bool "3G/1G user/kernel host split (for full 1G low memory)" + config HOST_VMSPLIT_2G + bool "2G/2G user/kernel host split" + config HOST_VMSPLIT_1G + bool "1G/3G user/kernel host split" +endchoice config TOP_ADDR - hex - default 0xc0000000 if !HOST_2G_2G - default 0x80000000 if HOST_2G_2G + hex + default 0xB0000000 if HOST_VMSPLIT_3G_OPT + default 0x78000000 if HOST_VMSPLIT_2G + default 0x40000000 if HOST_VMSPLIT_1G + default 0xC0000000 config 3_LEVEL_PGTABLES bool "Three-level pagetables (EXPERIMENTAL)" diff --git a/arch/um/Makefile b/arch/um/Makefile index c8016a98483..5d5ed726faa 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -64,9 +64,14 @@ CFLAGS += $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ AFLAGS += $(ARCH_INCLUDE) -USER_CFLAGS := $(patsubst -I%,,$(CFLAGS)) -USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ - $(MODE_INCLUDE) -D_FILE_OFFSET_BITS=64 +USER_CFLAGS = $(patsubst $(KERNEL_DEFINES),,$(patsubst -D__KERNEL__,,\ + $(patsubst -I%,,$(CFLAGS)))) $(ARCH_INCLUDE) $(MODE_INCLUDE) \ + -D_FILE_OFFSET_BITS=64 + +include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH) + +#This will adjust *FLAGS accordingly to the platform. +include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS) # -Derrno=kernel_errno - This turns all kernel references to errno into # kernel_errno to separate them from the libc errno. This allows -fno-common @@ -74,15 +79,11 @@ USER_CFLAGS := $(patsubst -D__KERNEL__,,$(USER_CFLAGS)) $(ARCH_INCLUDE) \ # errnos. # These apply to kernelspace only. -CFLAGS += -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \ - -Dmktime=kernel_mktime +KERNEL_DEFINES = -Derrno=kernel_errno -Dsigprocmask=kernel_sigprocmask \ + -Dmktime=kernel_mktime $(ARCH_KERNEL_DEFINES) +CFLAGS += $(KERNEL_DEFINES) CFLAGS += $(call cc-option,-fno-unit-at-a-time,) -include $(srctree)/$(ARCH_DIR)/Makefile-$(SUBARCH) - -#This will adjust *FLAGS accordingly to the platform. -include $(srctree)/$(ARCH_DIR)/Makefile-os-$(OS) - # These are needed for clean and mrproper, since in that case .config is not # included; the values here are meaningless diff --git a/arch/um/Makefile-i386 b/arch/um/Makefile-i386 index b65ca115ef7..c9f1c5b24c9 100644 --- a/arch/um/Makefile-i386 +++ b/arch/um/Makefile-i386 @@ -16,7 +16,6 @@ OBJCOPYFLAGS := -O binary -R .note -R .comment -S ifeq ("$(origin SUBARCH)", "command line") ifneq ("$(shell uname -m | sed -e s/i.86/i386/)", "$(SUBARCH)") CFLAGS += $(call cc-option,-m32) -USER_CFLAGS += $(call cc-option,-m32) AFLAGS += $(call cc-option,-m32) LINK-y += $(call cc-option,-m32) UML_OBJCOPYFLAGS += -F $(ELF_FORMAT) @@ -25,7 +24,7 @@ export LDFLAGS HOSTCFLAGS HOSTLDFLAGS UML_OBJCOPYFLAGS endif endif -CFLAGS += -U__$(SUBARCH)__ -U$(SUBARCH) +ARCH_KERNEL_DEFINES += -U__$(SUBARCH)__ -U$(SUBARCH) # First of all, tune CFLAGS for the specific CPU. This actually sets cflags-y. include $(srctree)/arch/i386/Makefile.cpu @@ -38,4 +37,3 @@ cflags-y += $(call cc-option,-mpreferred-stack-boundary=2) cflags-y += -ffreestanding CFLAGS += $(cflags-y) -USER_CFLAGS += $(cflags-y) diff --git a/arch/um/Makefile-x86_64 b/arch/um/Makefile-x86_64 index 11154b6773e..69ecea63fda 100644 --- a/arch/um/Makefile-x86_64 +++ b/arch/um/Makefile-x86_64 @@ -1,15 +1,15 @@ # Copyright 2003 - 2004 Pathscale, Inc # Released under the GPL -core-y += arch/um/sys-x86_64/ +core-y += arch/um/sys-x86_64/ arch/x86_64/crypto/ START := 0x60000000 -_extra_flags_ = -fno-builtin -m64 -mcmodel=kernel +_extra_flags_ = -fno-builtin -m64 #We #undef __x86_64__ for kernelspace, not for userspace where #it's needed for headers to work! -CFLAGS += -U__$(SUBARCH)__ $(_extra_flags_) -USER_CFLAGS += $(_extra_flags_) +ARCH_KERNEL_DEFINES = -U__$(SUBARCH)__ +CFLAGS += $(_extra_flags_) CHECKFLAGS += -m64 AFLAGS += -m64 diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h index 7a5b4afde69..c6a308464ac 100644 --- a/arch/um/drivers/cow_sys.h +++ b/arch/um/drivers/cow_sys.h @@ -5,6 +5,7 @@ #include "user_util.h" #include "os.h" #include "user.h" +#include "um_malloc.h" static inline void *cow_malloc(int size) { diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c index 77954ea7704..310af0f1e49 100644 --- a/arch/um/drivers/daemon_user.c +++ b/arch/um/drivers/daemon_user.c @@ -17,6 +17,7 @@ #include "user_util.h" #include "user.h" #include "os.h" +#include "um_malloc.h" #define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c index 108b7dafbd0..218aa0e9b79 100644 --- a/arch/um/drivers/fd.c +++ b/arch/um/drivers/fd.c @@ -12,6 +12,7 @@ #include "user_util.h" #include "chan_user.h" #include "os.h" +#include "um_malloc.h" struct fd_chan { int fd; diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c index 4d2bd39a85b..8138f5ea1bf 100644 --- a/arch/um/drivers/mcast_user.c +++ b/arch/um/drivers/mcast_user.c @@ -23,6 +23,7 @@ #include "user_util.h" #include "user.h" #include "os.h" +#include "um_malloc.h" #define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index d08bd036ccb..7b172160fe0 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -79,7 +79,7 @@ static irqreturn_t mconsole_interrupt(int irq, void *dev_id) /* long to avoid size mismatch warnings from gcc */ long fd; struct mconsole_entry *new; - struct mc_request req; + static struct mc_request req; /* that's OK */ fd = (long) dev_id; while (mconsole_get_request(fd, &req)){ @@ -91,6 +91,7 @@ static irqreturn_t mconsole_interrupt(int irq, void *dev_id) mconsole_reply(&req, "Out of memory", 1, 0); else { new->request = req; + new->request.regs = get_irq_regs()->regs; list_add(&new->list, &mc_requests); } } @@ -314,9 +315,21 @@ void mconsole_stop(struct mc_request *req) { deactivate_fd(req->originating_fd, MCONSOLE_IRQ); os_set_fd_block(req->originating_fd, 1); - mconsole_reply(req, "", 0, 0); - while(mconsole_get_request(req->originating_fd, req)){ - if(req->cmd->handler == mconsole_go) break; + mconsole_reply(req, "stopped", 0, 0); + while (mconsole_get_request(req->originating_fd, req)) { + if (req->cmd->handler == mconsole_go) + break; + if (req->cmd->handler == mconsole_stop) { + mconsole_reply(req, "Already stopped", 1, 0); + continue; + } + if (req->cmd->handler == mconsole_sysrq) { + struct pt_regs *old_regs; + old_regs = set_irq_regs((struct pt_regs *)&req->regs); + mconsole_sysrq(req); + set_irq_regs(old_regs); + continue; + } (*req->cmd->handler)(req); } os_set_fd_block(req->originating_fd, 0); @@ -673,9 +686,7 @@ static void with_console(struct mc_request *req, void (*proc)(void *), static void sysrq_proc(void *arg) { char *op = arg; - struct pt_regs *old_regs = set_irq_regs(¤t->thread.regs); handle_sysrq(*op, NULL); - set_irq_regs(old_regs); } void mconsole_sysrq(struct mc_request *req) diff --git a/arch/um/drivers/mconsole_user.c b/arch/um/drivers/mconsole_user.c index 17068eb746c..75aef6f7ef6 100644 --- a/arch/um/drivers/mconsole_user.c +++ b/arch/um/drivers/mconsole_user.c @@ -14,6 +14,7 @@ #include <sys/un.h> #include <unistd.h> #include "user.h" +#include "sysdep/ptrace.h" #include "mconsole.h" #include "umid.h" #include "user_util.h" diff --git a/arch/um/drivers/mmapper_kern.c b/arch/um/drivers/mmapper_kern.c index 9a3b5daf625..df3516e47d4 100644 --- a/arch/um/drivers/mmapper_kern.c +++ b/arch/um/drivers/mmapper_kern.c @@ -95,7 +95,8 @@ static const struct file_operations mmapper_fops = { .release = mmapper_release, }; -static const struct miscdevice mmapper_dev = { +/* No locking needed - only used (and modified) by below initcall and exitcall. */ +static struct miscdevice mmapper_dev = { .minor = MISC_DYNAMIC_MINOR, .name = "mmapper", .fops = &mmapper_fops diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c index f3a3f8a29c7..0ffd7ac295d 100644 --- a/arch/um/drivers/net_user.c +++ b/arch/um/drivers/net_user.c @@ -18,6 +18,7 @@ #include "kern_util.h" #include "net_user.h" #include "os.h" +#include "um_malloc.h" int tap_open_common(void *dev, char *gate_addr) { diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c index 2ef641ded96..11921a7baa7 100644 --- a/arch/um/drivers/pcap_user.c +++ b/arch/um/drivers/pcap_user.c @@ -12,6 +12,7 @@ #include "net_user.h" #include "pcap_user.h" #include "user.h" +#include "um_malloc.h" #define MAX_PACKET (ETH_MAX_PACKET + ETH_HEADER_OTHER) diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c index f2e8fc42ecc..bc6afaf74c1 100644 --- a/arch/um/drivers/port_user.c +++ b/arch/um/drivers/port_user.c @@ -19,6 +19,7 @@ #include "chan_user.h" #include "port.h" #include "os.h" +#include "um_malloc.h" struct port_chan { int raw; diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c index abec620e838..829a5eca8c0 100644 --- a/arch/um/drivers/pty.c +++ b/arch/um/drivers/pty.c @@ -13,6 +13,7 @@ #include "user_util.h" #include "kern_util.h" #include "os.h" +#include "um_malloc.h" struct pty_chan { void (*announce)(char *dev_name, int dev); diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c index 8460285c69a..7eddacc53b6 100644 --- a/arch/um/drivers/slip_user.c +++ b/arch/um/drivers/slip_user.c @@ -15,6 +15,7 @@ #include "slip.h" #include "slip_common.h" #include "os.h" +#include "um_malloc.h" void slip_user_init(void *data, void *dev) { diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c index 11de3ac1eb5..d95d64309ea 100644 --- a/arch/um/drivers/tty.c +++ b/arch/um/drivers/tty.c @@ -11,6 +11,7 @@ #include "user_util.h" #include "user.h" #include "os.h" +#include "um_malloc.h" struct tty_chan { char *dev; diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index bc458f57921..49c047b75cc 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -106,10 +106,15 @@ static inline void ubd_set_bit(__u64 bit, unsigned char *data) #define DRIVER_NAME "uml-blkdev" +/* Can be taken in interrupt context, and is passed to the block layer to lock + * the request queue. Kernel side code knows that. */ static DEFINE_SPINLOCK(ubd_io_lock); -static DEFINE_SPINLOCK(ubd_lock); -static void (*do_ubd)(void); +static DEFINE_MUTEX(ubd_lock); + +/* XXX - this made sense in 2.4 days, now it's only used as a boolean, and + * probably it doesn't make sense even for that. */ +static int do_ubd; static int ubd_open(struct inode * inode, struct file * filp); static int ubd_release(struct inode * inode, struct file * file); @@ -117,7 +122,7 @@ static int ubd_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg); static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo); -#define MAX_DEV (8) +#define MAX_DEV (16) static struct block_device_operations ubd_blops = { .owner = THIS_MODULE, @@ -150,8 +155,9 @@ static struct gendisk *fake_gendisk[MAX_DEV]; static struct openflags global_openflags = OPEN_FLAGS; struct cow { - /* This is the backing file, actually */ + /* backing file name */ char *file; + /* backing file fd */ int fd; unsigned long *bitmap; unsigned long bitmap_len; @@ -160,14 +166,16 @@ struct cow { }; struct ubd { + /* name (and fd, below) of the file opened for writing, either the + * backing or the cow file. */ char *file; int count; int fd; __u64 size; struct openflags boot_openflags; struct openflags openflags; - int shared; - int no_cow; + unsigned shared:1; + unsigned no_cow:1; struct cow cow; struct platform_device pdev; }; @@ -192,18 +200,7 @@ struct ubd { .cow = DEFAULT_COW, \ } -struct ubd ubd_dev[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; - -static int ubd0_init(void) -{ - struct ubd *dev = &ubd_dev[0]; - - if(dev->file == NULL) - dev->file = "root_fs"; - return(0); -} - -__initcall(ubd0_init); +struct ubd ubd_devs[MAX_DEV] = { [ 0 ... MAX_DEV - 1 ] = DEFAULT_UBD }; /* Only changed by fake_ide_setup which is a setup */ static int fake_ide = 0; @@ -277,7 +274,7 @@ static int parse_unit(char **ptr) return(-1); *ptr = end; } - else if (('a' <= *str) && (*str <= 'h')) { + else if (('a' <= *str) && (*str <= 'z')) { n = *str - 'a'; str++; *ptr = str; @@ -285,9 +282,13 @@ static int parse_unit(char **ptr) return(n); } +/* If *index_out == -1 at exit, the passed option was a general one; + * otherwise, the str pointer is used (and owned) inside ubd_devs array, so it + * should not be freed on exit. + */ static int ubd_setup_common(char *str, int *index_out) { - struct ubd *dev; + struct ubd *ubd_dev; struct openflags flags = global_openflags; char *backing_file; int n, err, i; @@ -311,7 +312,7 @@ static int ubd_setup_common(char *str, int *index_out) } err = 1; - spin_lock(&ubd_lock); + mutex_lock(&ubd_lock); if(fake_major != MAJOR_NR){ printk(KERN_ERR "Can't assign a fake major twice\n"); goto out1; @@ -323,7 +324,7 @@ static int ubd_setup_common(char *str, int *index_out) major); err = 0; out1: - spin_unlock(&ubd_lock); + mutex_unlock(&ubd_lock); return(err); } @@ -340,10 +341,10 @@ static int ubd_setup_common(char *str, int *index_out) } err = 1; - spin_lock(&ubd_lock); + mutex_lock(&ubd_lock); - dev = &ubd_dev[n]; - if(dev->file != NULL){ + ubd_dev = &ubd_devs[n]; + if(ubd_dev->file != NULL){ printk(KERN_ERR "ubd_setup : device already configured\n"); goto out; } @@ -360,10 +361,10 @@ static int ubd_setup_common(char *str, int *index_out) flags.s = 1; break; case 'd': - dev->no_cow = 1; + ubd_dev->no_cow = 1; break; case 'c': - dev->shared = 1; + ubd_dev->shared = 1; break; case '=': str++; @@ -390,7 +391,7 @@ break_loop: } if(backing_file){ - if(dev->no_cow) + if(ubd_dev->no_cow) printk(KERN_ERR "Can't specify both 'd' and a " "cow file\n"); else { @@ -398,11 +399,11 @@ break_loop: backing_file++; } } - dev->file = str; - dev->cow.file = backing_file; - dev->boot_openflags = flags; + ubd_dev->file = str; + ubd_dev->cow.file = backing_file; + ubd_dev->boot_openflags = flags; out: - spin_unlock(&ubd_lock); + mutex_unlock(&ubd_lock); return(err); } @@ -472,8 +473,9 @@ int thread_fd = -1; /* Changed by ubd_handler, which is serialized because interrupts only * happen on CPU 0. + * XXX: currently unused. */ -int intr_count = 0; +static int intr_count = 0; /* call ubd_finish if you need to serialize */ static void __ubd_finish(struct request *req, int error) @@ -493,6 +495,8 @@ static void __ubd_finish(struct request *req, int error) end_request(req, 1); } +/* Callable only from interrupt context - otherwise you need to do + * spin_lock_irq()/spin_lock_irqsave() */ static inline void ubd_finish(struct request *req, int error) { spin_lock(&ubd_io_lock); @@ -500,14 +504,15 @@ static inline void ubd_finish(struct request *req, int error) spin_unlock(&ubd_io_lock); } -/* Called without ubd_io_lock held */ +/* XXX - move this inside ubd_intr. */ +/* Called without ubd_io_lock held, and only in interrupt context. */ static void ubd_handler(void) { struct io_thread_req req; struct request *rq = elv_next_request(ubd_queue); int n; - do_ubd = NULL; + do_ubd = 0; intr_count++; n = os_read_file(thread_fd, &req, sizeof(req)); if(n != sizeof(req)){ @@ -521,7 +526,9 @@ static void ubd_handler(void) ubd_finish(rq, req.error); reactivate_fd(thread_fd, UBD_IRQ); + spin_lock(&ubd_io_lock); do_ubd_request(ubd_queue); + spin_unlock(&ubd_io_lock); } static irqreturn_t ubd_intr(int irq, void *dev) @@ -541,87 +548,90 @@ void kill_io_thread(void) __uml_exitcall(kill_io_thread); -static int ubd_file_size(struct ubd *dev, __u64 *size_out) +static inline int ubd_file_size(struct ubd *ubd_dev, __u64 *size_out) { char *file; - file = dev->cow.file ? dev->cow.file : dev->file; + file = ubd_dev->cow.file ? ubd_dev->cow.file : ubd_dev->file; return(os_file_size(file, size_out)); } -static void ubd_close(struct ubd *dev) +static void ubd_close_dev(struct ubd *ubd_dev) { - os_close_file(dev->fd); - if(dev->cow.file == NULL) + os_close_file(ubd_dev->fd); + if(ubd_dev->cow.file == NULL) return; - os_close_file(dev->cow.fd); - vfree(dev->cow.bitmap); - dev->cow.bitmap = NULL; + os_close_file(ubd_dev->cow.fd); + vfree(ubd_dev->cow.bitmap); + ubd_dev->cow.bitmap = NULL; } -static int ubd_open_dev(struct ubd *dev) +static int ubd_open_dev(struct ubd *ubd_dev) { struct openflags flags; char **back_ptr; int err, create_cow, *create_ptr; + int fd; - dev->openflags = dev->boot_openflags; + ubd_dev->openflags = ubd_dev->boot_openflags; create_cow = 0; - create_ptr = (dev->cow.file != NULL) ? &create_cow : NULL; - back_ptr = dev->no_cow ? NULL : &dev->cow.file; - dev->fd = open_ubd_file(dev->file, &dev->openflags, dev->shared, - back_ptr, &dev->cow.bitmap_offset, - &dev->cow.bitmap_len, &dev->cow.data_offset, + create_ptr = (ubd_dev->cow.file != NULL) ? &create_cow : NULL; + back_ptr = ubd_dev->no_cow ? NULL : &ubd_dev->cow.file; + + fd = open_ubd_file(ubd_dev->file, &ubd_dev->openflags, ubd_dev->shared, + back_ptr, &ubd_dev->cow.bitmap_offset, + &ubd_dev->cow.bitmap_len, &ubd_dev->cow.data_offset, create_ptr); - if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, - dev->openflags, 1 << 9, PAGE_SIZE, - &dev->cow.bitmap_offset, - &dev->cow.bitmap_len, - &dev->cow.data_offset); - if(dev->fd >= 0){ + if((fd == -ENOENT) && create_cow){ + fd = create_cow_file(ubd_dev->file, ubd_dev->cow.file, + ubd_dev->openflags, 1 << 9, PAGE_SIZE, + &ubd_dev->cow.bitmap_offset, + &ubd_dev->cow.bitmap_len, + &ubd_dev->cow.data_offset); + if(fd >= 0){ printk(KERN_INFO "Creating \"%s\" as COW file for " - "\"%s\"\n", dev->file, dev->cow.file); + "\"%s\"\n", ubd_dev->file, ubd_dev->cow.file); } } - if(dev->fd < 0){ - printk("Failed to open '%s', errno = %d\n", dev->file, - -dev->fd); - return(dev->fd); + if(fd < 0){ + printk("Failed to open '%s', errno = %d\n", ubd_dev->file, + -fd); + return fd; } + ubd_dev->fd = fd; - if(dev->cow.file != NULL){ + if(ubd_dev->cow.file != NULL){ err = -ENOMEM; - dev->cow.bitmap = (void *) vmalloc(dev->cow.bitmap_len); - if(dev->cow.bitmap == NULL){ + ubd_dev->cow.bitmap = (void *) vmalloc(ubd_dev->cow.bitmap_len); + if(ubd_dev->cow.bitmap == NULL){ printk(KERN_ERR "Failed to vmalloc COW bitmap\n"); goto error; } flush_tlb_kernel_vm(); - err = read_cow_bitmap(dev->fd, dev->cow.bitmap, - dev->cow.bitmap_offset, - dev->cow.bitmap_len); + err = read_cow_bitmap(ubd_dev->fd, ubd_dev->cow.bitmap, + ubd_dev->cow.bitmap_offset, + ubd_dev->cow.bitmap_len); if(err < 0) goto error; - flags = dev->openflags; + flags = ubd_dev->openflags; flags.w = 0; - err = open_ubd_file(dev->cow.file, &flags, dev->shared, NULL, + err = open_ubd_file(ubd_dev->cow.file, &flags, ubd_dev->shared, NULL, NULL, NULL, NULL, NULL); if(err < 0) goto error; - dev->cow.fd = err; + ubd_dev->cow.fd = err; } return(0); error: - os_close_file(dev->fd); + os_close_file(ubd_dev->fd); return(err); } -static int ubd_new_disk(int major, u64 size, int unit, +static int ubd_disk_register(int major, u64 size, int unit, struct gendisk **disk_out) { @@ -642,13 +652,13 @@ static int ubd_new_disk(int major, u64 size, int unit, /* sysfs register (not for ide fake devices) */ if (major == MAJOR_NR) { - ubd_dev[unit].pdev.id = unit; - ubd_dev[unit].pdev.name = DRIVER_NAME; - platform_device_register(&ubd_dev[unit].pdev); - disk->driverfs_dev = &ubd_dev[unit].pdev.dev; + ubd_devs[unit].pdev.id = unit; + ubd_devs[unit].pdev.name = DRIVER_NAME; + platform_device_register(&ubd_devs[unit].pdev); + disk->driverfs_dev = &ubd_devs[unit].pdev.dev; } - disk->private_data = &ubd_dev[unit]; + disk->private_data = &ubd_devs[unit]; disk->queue = ubd_queue; add_disk(disk); @@ -660,25 +670,25 @@ static int ubd_new_disk(int major, u64 size, int unit, static int ubd_add(int n) { - struct ubd *dev = &ubd_dev[n]; + struct ubd *ubd_dev = &ubd_devs[n]; int err; err = -ENODEV; - if(dev->file == NULL) + if(ubd_dev->file == NULL) goto out; - err = ubd_file_size(dev, &dev->size); + err = ubd_file_size(ubd_dev, &ubd_dev->size); if(err < 0) goto out; - dev->size = ROUND_BLOCK(dev->size); + ubd_dev->size = ROUND_BLOCK(ubd_dev->size); - err = ubd_new_disk(MAJOR_NR, dev->size, n, &ubd_gendisk[n]); + err = ubd_disk_register(MAJOR_NR, ubd_dev->size, n, &ubd_gendisk[n]); if(err) goto out; if(fake_major != MAJOR_NR) - ubd_new_disk(fake_major, dev->size, n, + ubd_disk_register(fake_major, ubd_dev->size, n, &fake_gendisk[n]); /* perhaps this should also be under the "if (fake_major)" above */ @@ -693,32 +703,41 @@ out: static int ubd_config(char *str) { - int n, err; + int n, ret; str = kstrdup(str, GFP_KERNEL); - if(str == NULL){ + if (str == NULL) { printk(KERN_ERR "ubd_config failed to strdup string\n"); - return(1); + ret = 1; + goto out; } - err = ubd_setup_common(str, &n); - if(err){ - kfree(str); - return(-1); + ret = ubd_setup_common(str, &n); + if (ret) { + ret = -1; + goto err_free; + } + if (n == -1) { + ret = 0; + goto err_free; } - if(n == -1) return(0); - spin_lock(&ubd_lock); - err = ubd_add(n); - if(err) - ubd_dev[n].file = NULL; - spin_unlock(&ubd_lock); + mutex_lock(&ubd_lock); + ret = ubd_add(n); + if (ret) + ubd_devs[n].file = NULL; + mutex_unlock(&ubd_lock); - return(err); +out: + return ret; + +err_free: + kfree(str); + goto out; } static int ubd_get_config(char *name, char *str, int size, char **error_out) { - struct ubd *dev; + struct ubd *ubd_dev; int n, len = 0; n = parse_unit(&name); @@ -727,24 +746,24 @@ static int ubd_get_config(char *name, char *str, int size, char **error_out) return(-1); } - dev = &ubd_dev[n]; - spin_lock(&ubd_lock); + ubd_dev = &ubd_devs[n]; + mutex_lock(&ubd_lock); - if(dev->file == NULL){ + if(ubd_dev->file == NULL){ CONFIG_CHUNK(str, size, len, "", 1); goto out; } - CONFIG_CHUNK(str, size, len, dev->file, 0); + CONFIG_CHUNK(str, size, len, ubd_dev->file, 0); - if(dev->cow.file != NULL){ + if(ubd_dev->cow.file != NULL){ CONFIG_CHUNK(str, size, len, ",", 0); - CONFIG_CHUNK(str, size, len, dev->cow.file, 1); + CONFIG_CHUNK(str, size, len, ubd_dev->cow.file, 1); } else CONFIG_CHUNK(str, size, len, "", 1); out: - spin_unlock(&ubd_lock); + mutex_unlock(&ubd_lock); return(len); } @@ -760,22 +779,22 @@ static int ubd_id(char **str, int *start_out, int *end_out) static int ubd_remove(int n) { - struct ubd *dev; + struct ubd *ubd_dev; int err = -ENODEV; - spin_lock(&ubd_lock); + mutex_lock(&ubd_lock); if(ubd_gendisk[n] == NULL) goto out; - dev = &ubd_dev[n]; + ubd_dev = &ubd_devs[n]; - if(dev->file == NULL) + if(ubd_dev->file == NULL) goto out; /* you cannot remove a open disk */ err = -EBUSY; - if(dev->count > 0) + if(ubd_dev->count > 0) goto out; del_gendisk(ubd_gendisk[n]); @@ -788,14 +807,15 @@ static int ubd_remove(int n) fake_gendisk[n] = NULL; } - platform_device_unregister(&dev->pdev); - *dev = ((struct ubd) DEFAULT_UBD); + platform_device_unregister(&ubd_dev->pdev); + *ubd_dev = ((struct ubd) DEFAULT_UBD); err = 0; out: - spin_unlock(&ubd_lock); + mutex_unlock(&ubd_lock); return err; } +/* All these are called by mconsole in process context and without ubd-specific locks. */ static struct mc_device ubd_mc = { .name = "ubd", .config = ubd_config, @@ -804,7 +824,7 @@ static struct mc_device ubd_mc = { .remove = ubd_remove, }; -static int ubd_mc_init(void) +static int __init ubd_mc_init(void) { mconsole_register_dev(&ubd_mc); return 0; @@ -812,13 +832,24 @@ static int ubd_mc_init(void) __initcall(ubd_mc_init); +static int __init ubd0_init(void) +{ + struct ubd *ubd_dev = &ubd_devs[0]; + + if(ubd_dev->file == NULL) + ubd_dev->file = "root_fs"; + return(0); +} + +__initcall(ubd0_init); + static struct platform_driver ubd_driver = { .driver = { .name = DRIVER_NAME, }, }; -int ubd_init(void) +static int __init ubd_init(void) { int i; @@ -846,7 +877,7 @@ int ubd_init(void) late_initcall(ubd_init); -int ubd_driver_init(void){ +static int __init ubd_driver_init(void){ unsigned long stack; int err; @@ -867,7 +898,7 @@ int ubd_driver_init(void){ return(0); } err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, - IRQF_DISABLED, "ubd", ubd_dev); + IRQF_DISABLED, "ubd", ubd_devs); if(err != 0) printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); return 0; @@ -878,24 +909,24 @@ device_initcall(ubd_driver_init); static int ubd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ubd *dev = disk->private_data; + struct ubd *ubd_dev = disk->private_data; int err = 0; - if(dev->count == 0){ - err = ubd_open_dev(dev); + if(ubd_dev->count == 0){ + err = ubd_open_dev(ubd_dev); if(err){ printk(KERN_ERR "%s: Can't open \"%s\": errno = %d\n", - disk->disk_name, dev->file, -err); + disk->disk_name, ubd_dev->file, -err); goto out; } } - dev->count++; - set_disk_ro(disk, !dev->openflags.w); + ubd_dev->count++; + set_disk_ro(disk, !ubd_dev->openflags.w); /* This should no more be needed. And it didn't work anyway to exclude * read-write remounting of filesystems.*/ - /*if((filp->f_mode & FMODE_WRITE) && !dev->openflags.w){ - if(--dev->count == 0) ubd_close(dev); + /*if((filp->f_mode & FMODE_WRITE) && !ubd_dev->openflags.w){ + if(--ubd_dev->count == 0) ubd_close_dev(ubd_dev); err = -EROFS; }*/ out: @@ -905,10 +936,10 @@ static int ubd_open(struct inode *inode, struct file *filp) static int ubd_release(struct inode * inode, struct file * file) { struct gendisk *disk = inode->i_bdev->bd_disk; - struct ubd *dev = disk->private_data; + struct ubd *ubd_dev = disk->private_data; - if(--dev->count == 0) - ubd_close(dev); + if(--ubd_dev->count == 0) + ubd_close_dev(ubd_dev); return(0); } @@ -976,12 +1007,12 @@ static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; - struct ubd *dev = disk->private_data; + struct ubd *ubd_dev = disk->private_data; __u64 offset; int len; /* This should be impossible now */ - if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ + if((rq_data_dir(req) == WRITE) && !ubd_dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", disk->disk_name); end_request(req, 0); @@ -991,8 +1022,8 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) offset = ((__u64) req->sector) << 9; len = req->current_nr_sectors << 9; - io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; - io_req->fds[1] = dev->fd; + io_req->fds[0] = (ubd_dev->cow.file != NULL) ? ubd_dev->cow.fd : ubd_dev->fd; + io_req->fds[1] = ubd_dev->fd; io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; @@ -1001,13 +1032,13 @@ static int prepare_request(struct request *req, struct io_thread_req *io_req) io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; - io_req->offsets[1] = dev->cow.data_offset; + io_req->offsets[1] = ubd_dev->cow.data_offset; io_req->buffer = req->buffer; io_req->sectorsize = 1 << 9; - if(dev->cow.file != NULL) - cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset, - dev->cow.bitmap_len); + if(ubd_dev->cow.file != NULL) + cowify_req(io_req, ubd_dev->cow.bitmap, ubd_dev->cow.bitmap_offset, + ubd_dev->cow.bitmap_len); return(0); } @@ -1033,7 +1064,7 @@ static void do_ubd_request(request_queue_t *q) return; err = prepare_request(req, &io_req); if(!err){ - do_ubd = ubd_handler; + do_ubd = 1; n = os_write_file(thread_fd, (char *) &io_req, sizeof(io_req)); if(n != sizeof(io_req)) @@ -1045,18 +1076,18 @@ static void do_ubd_request(request_queue_t *q) static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo) { - struct ubd *dev = bdev->bd_disk->private_data; + struct ubd *ubd_dev = bdev->bd_disk->private_data; geo->heads = 128; geo->sectors = 32; - geo->cylinders = dev->size / (128 * 32 * 512); + geo->cylinders = ubd_dev->size / (128 * 32 * 512); return 0; } static int ubd_ioctl(struct inode * inode, struct file * file, unsigned int cmd, unsigned long arg) { - struct ubd *dev = inode->i_bdev->bd_disk->private_data; + struct ubd *ubd_dev = inode->i_bdev->bd_disk->private_data; struct hd_driveid ubd_id = { .cyls = 0, .heads = 128, @@ -1066,7 +1097,7 @@ static int ubd_ioctl(struct inode * inode, struct file * file, switch (cmd) { struct cdrom_volctrl volume; case HDIO_GET_IDENTITY: - ubd_id.cyls = dev->size / (128 * 32 * 512); + ubd_id.cyls = ubd_dev->size / (128 * 32 * 512); if(copy_to_user((char __user *) arg, (char *) &ubd_id, sizeof(ubd_id))) return(-EFAULT); @@ -1353,8 +1384,8 @@ void do_io(struct io_thread_req *req) */ int kernel_fd = -1; -/* Only changed by the io thread */ -int io_count = 0; +/* Only changed by the io thread. XXX: currently unused. */ +static int io_count = 0; int io_thread(void *arg) { diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 386f8b95298..850221d9b4c 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -136,8 +136,6 @@ int xterm_open(int input, int output, int primary, void *d, return(pid); } - if(data->stack == 0) free_stack(stack, 0); - if (data->direct_rcv) { new = os_rcv_fd(fd, &data->helper_pid); } else { diff --git a/arch/um/include/common-offsets.h b/arch/um/include/common-offsets.h index 356390d1f8b..461175f8b1d 100644 --- a/arch/um/include/common-offsets.h +++ b/arch/um/include/common-offsets.h @@ -1,9 +1,16 @@ /* for use by sys-$SUBARCH/kernel-offsets.c */ +DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE); +#ifdef CONFIG_MODE_TT +OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid); +#endif + OFFSET(HOST_TASK_REGS, task_struct, thread.regs); OFFSET(HOST_TASK_PID, task_struct, pid); + DEFINE(UM_KERN_PAGE_SIZE, PAGE_SIZE); DEFINE(UM_NSEC_PER_SEC, NSEC_PER_SEC); + DEFINE_STR(UM_KERN_EMERG, KERN_EMERG); DEFINE_STR(UM_KERN_ALERT, KERN_ALERT); DEFINE_STR(UM_KERN_CRIT, KERN_CRIT); @@ -12,6 +19,10 @@ DEFINE_STR(UM_KERN_WARNING, KERN_WARNING); DEFINE_STR(UM_KERN_NOTICE, KERN_NOTICE); DEFINE_STR(UM_KERN_INFO, KERN_INFO); DEFINE_STR(UM_KERN_DEBUG, KERN_DEBUG); + DEFINE(UM_ELF_CLASS, ELF_CLASS); DEFINE(UM_ELFCLASS32, ELFCLASS32); DEFINE(UM_ELFCLASS64, ELFCLASS64); + +/* For crypto assembler code. */ +DEFINE(crypto_tfm_ctx_offset, offsetof(struct crypto_tfm, __crt_ctx)); diff --git a/arch/um/include/kern_util.h b/arch/um/include/kern_util.h index 59cfa9e0cad..cec9fcc57bf 100644 --- a/arch/um/include/kern_util.h +++ b/arch/um/include/kern_util.h @@ -6,7 +6,6 @@ #ifndef __KERN_UTIL_H__ #define __KERN_UTIL_H__ -#include "linux/threads.h" #include "sysdep/ptrace.h" #include "sysdep/faultinfo.h" diff --git a/arch/um/include/longjmp.h b/arch/um/include/longjmp.h index e93c6d3e893..e860bc5848e 100644 --- a/arch/um/include/longjmp.h +++ b/arch/um/include/longjmp.h @@ -12,7 +12,8 @@ extern void longjmp(jmp_buf, int); } while(0) #define UML_SETJMP(buf) ({ \ - int n, enable; \ + int n; \ + volatile int enable; \ enable = get_signals(); \ n = setjmp(*buf); \ if(n != 0) \ diff --git a/arch/um/include/mconsole.h b/arch/um/include/mconsole.h index 58f67d39110..2666815b6af 100644 --- a/arch/um/include/mconsole.h +++ b/arch/um/include/mconsole.h @@ -61,6 +61,7 @@ struct mc_request struct mconsole_request request; struct mconsole_command *cmd; + union uml_pt_regs regs; }; extern char mconsole_socket_name[]; diff --git a/arch/um/include/mconsole_kern.h b/arch/um/include/mconsole_kern.h index d0b690197fd..1ea6d928e1c 100644 --- a/arch/um/include/mconsole_kern.h +++ b/arch/um/include/mconsole_kern.h @@ -14,6 +14,7 @@ struct mconsole_entry { struct mc_request request; }; +/* All these methods are called in process context. */ struct mc_device { struct list_head list; char *name; diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 120ca21a513..6516f6dca96 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -201,6 +201,7 @@ extern int os_getpgrp(void); #ifdef UML_CONFIG_MODE_TT extern void init_new_thread_stack(void *sig_stack, void (*usr1_handler)(int)); +extern void stop(void); #endif extern void init_new_thread_signals(void); extern int run_kernel_thread(int (*fn)(void *), void *arg, void **jmp_ptr); diff --git a/arch/um/include/sysdep-i386/barrier.h b/arch/um/include/sysdep-i386/barrier.h new file mode 100644 index 00000000000..b58d52c5b2f --- /dev/null +++ b/arch/um/include/sysdep-i386/barrier.h @@ -0,0 +1,9 @@ +#ifndef __SYSDEP_I386_BARRIER_H +#define __SYSDEP_I386_BARRIER_H + +/* Copied from include/asm-i386 for use by userspace. i386 has the option + * of using mfence, but I'm just using this, which works everywhere, for now. + */ +#define mb() asm volatile("lock; addl $0,0(%esp)") + +#endif diff --git a/arch/um/include/sysdep-i386/kernel-offsets.h b/arch/um/include/sysdep-i386/kernel-offsets.h index 2c13de321f2..97ec9d894d7 100644 --- a/arch/um/include/sysdep-i386/kernel-offsets.h +++ b/arch/um/include/sysdep-i386/kernel-offsets.h @@ -1,6 +1,7 @@ #include <linux/stddef.h> #include <linux/sched.h> #include <linux/elf.h> +#include <linux/crypto.h> #include <asm/mman.h> #define DEFINE(sym, val) \ @@ -17,9 +18,5 @@ void foo(void) { OFFSET(HOST_TASK_DEBUGREGS, task_struct, thread.arch.debugregs); - DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE); -#ifdef CONFIG_MODE_TT - OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid); -#endif #include <common-offsets.h> } diff --git a/arch/um/include/sysdep-x86_64/barrier.h b/arch/um/include/sysdep-x86_64/barrier.h new file mode 100644 index 00000000000..7b610befdc8 --- /dev/null +++ b/arch/um/include/sysdep-x86_64/barrier.h @@ -0,0 +1,7 @@ +#ifndef __SYSDEP_X86_64_BARRIER_H +#define __SYSDEP_X86_64_BARRIER_H + +/* Copied from include/asm-x86_64 for use by userspace. */ +#define mb() asm volatile("mfence":::"memory") + +#endif diff --git a/arch/um/include/sysdep-x86_64/kernel-offsets.h b/arch/um/include/sysdep-x86_64/kernel-offsets.h index 91d129fb393..a307237b796 100644 --- a/arch/um/include/sysdep-x86_64/kernel-offsets.h +++ b/arch/um/include/sysdep-x86_64/kernel-offsets.h @@ -2,6 +2,7 @@ #include <linux/sched.h> #include <linux/time.h> #include <linux/elf.h> +#include <linux/crypto.h> #include <asm/page.h> #include <asm/mman.h> @@ -18,9 +19,5 @@ void foo(void) { - DEFINE(KERNEL_MADV_REMOVE, MADV_REMOVE); -#ifdef CONFIG_MODE_TT - OFFSET(HOST_TASK_EXTERN_PID, task_struct, thread.mode.tt.extern_pid); -#endif #include <common-offsets.h> } diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h new file mode 100644 index 00000000000..0363a9b53f8 --- /dev/null +++ b/arch/um/include/um_malloc.h @@ -0,0 +1,17 @@ +/* + * Copyright (C) 2005 Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> + * Licensed under the GPL + */ + +#ifndef __UM_MALLOC_H__ +#define __UM_MALLOC_H__ + +extern void *um_kmalloc(int size); +extern void *um_kmalloc_atomic(int size); +extern void kfree(const void *ptr); + +extern void *um_vmalloc(int size); +extern void *um_vmalloc_atomic(int size); +extern void vfree(void *ptr); + +#endif /* __UM_MALLOC_H__ */ diff --git a/arch/um/include/user.h b/arch/um/include/user.h index 39f8c880107..acadce3f271 100644 --- a/arch/um/include/user.h +++ b/arch/um/include/user.h @@ -11,17 +11,11 @@ extern void panic(const char *fmt, ...) extern int printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); extern void schedule(void); -extern void *um_kmalloc(int size); -extern void *um_kmalloc_atomic(int size); -extern void kfree(void *ptr); extern int in_aton(char *str); extern int open_gdb_chan(void); /* These use size_t, however unsigned long is correct on both i386 and x86_64. */ extern unsigned long strlcpy(char *, const char *, unsigned long); extern unsigned long strlcat(char *, const char *, unsigned long); -extern void *um_vmalloc(int size); -extern void *um_vmalloc_atomic(int size); -extern void vfree(void *ptr); #endif diff --git a/arch/um/include/user_util.h b/arch/um/include/user_util.h index 802d7842514..06625fefef3 100644 --- a/arch/um/include/user_util.h +++ b/arch/um/include/user_util.h @@ -52,7 +52,6 @@ extern int linux_main(int argc, char **argv); extern void set_cmdline(char *cmd); extern void input_cb(void (*proc)(void *), void *arg, int arg_len); extern int get_pty(void); -extern void *um_kmalloc(int size); extern int switcheroo(int fd, int prot, void *from, void *to, int size); extern void do_exec(int old_pid, int new_pid); extern void tracer_panic(char *msg, ...) diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 68ed24df5c8..e36f92b463c 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -14,6 +14,7 @@ SECTIONS * is remapped.*/ __binary_start = .; . = ALIGN(4096); /* Init code and data */ + _text = .; _stext = .; __init_begin = .; .init.text : { diff --git a/arch/um/kernel/irq.c b/arch/um/kernel/irq.c index ef259569fd8..5c1e611f628 100644 --- a/arch/um/kernel/irq.c +++ b/arch/um/kernel/irq.c @@ -31,6 +31,7 @@ #include "irq_kern.h" #include "os.h" #include "sigio.h" +#include "um_malloc.h" #include "misc_constants.h" /* diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index fe6c64abda5..348b272bb76 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -46,6 +46,7 @@ #include "mode.h" #include "mode_kern.h" #include "choose-mode.h" +#include "um_malloc.h" /* This is a per-cpu array. A processor only modifies its entry and it only * cares about its entry, so it's OK if another processor is modifying its diff --git a/arch/um/kernel/skas/mmu.c b/arch/um/kernel/skas/mmu.c index c17eddcf89b..2c6d090a2e8 100644 --- a/arch/um/kernel/skas/mmu.c +++ b/arch/um/kernel/skas/mmu.c @@ -60,10 +60,7 @@ static int init_stub_pte(struct mm_struct *mm, unsigned long proc, #endif *pte = mk_pte(virt_to_page(kernel), __pgprot(_PAGE_PRESENT)); - /* This is wrong for the code page, but it doesn't matter since the - * stub is mapped by hand with the correct permissions. - */ - *pte = pte_mkwrite(*pte); + *pte = pte_mkread(*pte); return(0); out_pmd: diff --git a/arch/um/kernel/tt/tracer.c b/arch/um/kernel/tt/tracer.c index 9882342206e..b9195355075 100644 --- a/arch/um/kernel/tt/tracer.c +++ b/arch/um/kernel/tt/tracer.c @@ -176,7 +176,6 @@ struct { int signal_index[32]; int nsignals = 0; int debug_trace = 0; -extern int io_nsignals, io_count, intr_count; extern void signal_usr1(int sig); diff --git a/arch/um/kernel/tt/uaccess_user.c b/arch/um/kernel/tt/uaccess_user.c index 6c92bbccb49..ed1abcf4d05 100644 --- a/arch/um/kernel/tt/uaccess_user.c +++ b/arch/um/kernel/tt/uaccess_user.c @@ -4,13 +4,13 @@ * Licensed under the GPL */ -#include <setjmp.h> #include <string.h> #include "user_util.h" #include "uml_uaccess.h" #include "task.h" #include "kern_util.h" #include "os.h" +#include "longjmp.h" int __do_copy_from_user(void *to, const void *from, int n, void **fault_addr, void **fault_catcher) @@ -80,10 +80,10 @@ int __do_strnlen_user(const char *str, unsigned long n, struct tt_regs save = TASK_REGS(get_current())->tt; int ret; unsigned long *faddrp = (unsigned long *)fault_addr; - sigjmp_buf jbuf; + jmp_buf jbuf; *fault_catcher = &jbuf; - if(sigsetjmp(jbuf, 1) == 0) + if(UML_SETJMP(&jbuf) == 0) ret = strlen(str) + 1; else ret = *faddrp - (unsigned long) str; diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 8eca47a6ff0..f6301274cf3 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -25,6 +25,7 @@ SECTIONS . = ALIGN(4096); /* Init code and data */ #endif + _text = .; _stext = .; __init_begin = .; .init.text : { diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c index f559bdf746e..863981ba146 100644 --- a/arch/um/os-Linux/drivers/ethertap_user.c +++ b/arch/um/os-Linux/drivers/ethertap_user.c @@ -20,6 +20,7 @@ #include "net_user.h" #include "etap.h" #include "os.h" +#include "um_malloc.h" #define MAX_PACKET ETH_MAX_PACKET diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index cd15b9df5b5..d13299cfa31 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -35,22 +35,23 @@ static int helper_child(void *arg) char **argv = data->argv; int errval; - if(helper_pause){ + if (helper_pause){ signal(SIGHUP, helper_hup); pause(); } - if(data->pre_exec != NULL) + if (data->pre_exec != NULL) (*data->pre_exec)(data->pre_data); execvp(argv[0], argv); errval = -errno; printk("helper_child - execve of '%s' failed - errno = %d\n", argv[0], errno); os_write_file(data->fd, &errval, sizeof(errval)); kill(os_getpid(), SIGKILL); - return(0); + return 0; } /* Returns either the pid of the child process we run or -E* on failure. - * XXX The alloc_stack here breaks if this is called in the tracing thread */ + * XXX The alloc_stack here breaks if this is called in the tracing thread, so + * we need to receive a preallocated stack (a local buffer is ok). */ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, unsigned long *stack_out) { @@ -58,20 +59,21 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, unsigned long stack, sp; int pid, fds[2], ret, n; - if((stack_out != NULL) && (*stack_out != 0)) + if ((stack_out != NULL) && (*stack_out != 0)) stack = *stack_out; - else stack = alloc_stack(0, __cant_sleep()); - if(stack == 0) + else + stack = alloc_stack(0, __cant_sleep()); + if (stack == 0) return -ENOMEM; ret = os_pipe(fds, 1, 0); - if(ret < 0){ + if (ret < 0) { printk("run_helper : pipe failed, ret = %d\n", -ret); goto out_free; } ret = os_set_exec_close(fds[1], 1); - if(ret < 0){ + if (ret < 0) { printk("run_helper : setting FD_CLOEXEC failed, ret = %d\n", -ret); goto out_close; @@ -83,7 +85,7 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, data.argv = argv; data.fd = fds[1]; pid = clone(helper_child, (void *) sp, CLONE_VM | SIGCHLD, &data); - if(pid < 0){ + if (pid < 0) { ret = -errno; printk("run_helper : clone failed, errno = %d\n", errno); goto out_close; @@ -95,10 +97,10 @@ int run_helper(void (*pre_exec)(void *), void *pre_data, char **argv, /* Read the errno value from the child, if the exec failed, or get 0 if * the exec succeeded because the pipe fd was set as close-on-exec. */ n = os_read_file(fds[0], &ret, sizeof(ret)); - if(n == 0) + if (n == 0) { ret = pid; - else { - if(n < 0){ + } else { + if (n < 0) { printk("run_helper : read on pipe failed, ret = %d\n", -n); ret = n; @@ -112,10 +114,9 @@ out_close: close(fds[1]); close(fds[0]); out_free: - if(stack_out == NULL) + if ((stack_out == NULL) || (*stack_out == 0)) free_stack(stack, 0); - else *stack_out = stack; - return(ret); + return ret; } int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, @@ -125,31 +126,32 @@ int run_helper_thread(int (*proc)(void *), void *arg, unsigned int flags, int pid, status, err; stack = alloc_stack(stack_order, __cant_sleep()); - if(stack == 0) return(-ENOMEM); + if (stack == 0) + return -ENOMEM; sp = stack + (page_size() << stack_order) - sizeof(void *); pid = clone(proc, (void *) sp, flags | SIGCHLD, arg); - if(pid < 0){ + if (pid < 0) { err = -errno; printk("run_helper_thread : clone failed, errno = %d\n", errno); return err; } - if(stack_out == NULL){ + if (stack_out == NULL) { CATCH_EINTR(pid = waitpid(pid, &status, 0)); - if(pid < 0){ + if (pid < 0) { err = -errno; printk("run_helper_thread - wait failed, errno = %d\n", errno); pid = err; } - if(!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) + if (!WIFEXITED(status) || (WEXITSTATUS(status) != 0)) printk("run_helper_thread - thread returned status " "0x%x\n", status); free_stack(stack, stack_order); - } - else *stack_out = stack; - return(pid); + } else + *stack_out = stack; + return pid; } int helper_wait(int pid) @@ -157,9 +159,9 @@ int helper_wait(int pid) int ret; CATCH_EINTR(ret = waitpid(pid, NULL, WNOHANG)); - if(ret < 0){ + if (ret < 0) { ret = -errno; printk("helper_wait : waitpid failed, errno = %d\n", errno); } - return(ret); + return ret; } diff --git a/arch/um/os-Linux/irq.c b/arch/um/os-Linux/irq.c index a97206df5b5..d46b818c131 100644 --- a/arch/um/os-Linux/irq.c +++ b/arch/um/os-Linux/irq.c @@ -18,6 +18,7 @@ #include "sigio.h" #include "irq_user.h" #include "os.h" +#include "um_malloc.h" static struct pollfd *pollfds = NULL; static int pollfds_num = 0; diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c index d1c5670787d..685feaab65d 100644 --- a/arch/um/os-Linux/main.c +++ b/arch/um/os-Linux/main.c @@ -23,6 +23,7 @@ #include "choose-mode.h" #include "uml-config.h" #include "os.h" +#include "um_malloc.h" /* Set in set_stklim, which is called from main and __wrap_malloc. * __wrap_malloc only calls it if main hasn't started. diff --git a/arch/um/os-Linux/process.c b/arch/um/os-Linux/process.c index 51f0893640a..c692a192957 100644 --- a/arch/um/os-Linux/process.c +++ b/arch/um/os-Linux/process.c @@ -7,7 +7,6 @@ #include <stdio.h> #include <errno.h> #include <signal.h> -#include <linux/unistd.h> #include <sys/mman.h> #include <sys/wait.h> #include <sys/mman.h> diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c index f6457765b17..925a65240cf 100644 --- a/arch/um/os-Linux/sigio.c +++ b/arch/um/os-Linux/sigio.c @@ -19,6 +19,7 @@ #include "user_util.h" #include "sigio.h" #include "os.h" +#include "um_malloc.h" /* Protected by sigio_lock(), also used by sigio_cleanup, which is an * exitcall. diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c index 6b81739279d..b897e8592d7 100644 --- a/arch/um/os-Linux/signal.c +++ b/arch/um/os-Linux/signal.c @@ -15,6 +15,7 @@ #include "user.h" #include "signal_kern.h" #include "sysdep/sigcontext.h" +#include "sysdep/barrier.h" #include "sigcontext.h" #include "mode.h" #include "os.h" @@ -34,8 +35,12 @@ #define SIGALRM_BIT 2 #define SIGALRM_MASK (1 << SIGALRM_BIT) -static int signals_enabled = 1; -static int pending = 0; +/* These are used by both the signal handlers and + * block/unblock_signals. I don't want modifications cached in a + * register - they must go straight to memory. + */ +static volatile int signals_enabled = 1; +static volatile int pending = 0; void sig_handler(int sig, struct sigcontext *sc) { @@ -152,6 +157,12 @@ int change_sig(int signal, int on) void block_signals(void) { signals_enabled = 0; + /* This must return with signals disabled, so this barrier + * ensures that writes are flushed out before the return. + * This might matter if gcc figures out how to inline this and + * decides to shuffle this code into the caller. + */ + mb(); } void unblock_signals(void) @@ -171,9 +182,23 @@ void unblock_signals(void) */ signals_enabled = 1; + /* Setting signals_enabled and reading pending must + * happen in this order. + */ + mb(); + save_pending = pending; - if(save_pending == 0) + if(save_pending == 0){ + /* This must return with signals enabled, so + * this barrier ensures that writes are + * flushed out before the return. This might + * matter if gcc figures out how to inline + * this (unlikely, given its size) and decides + * to shuffle this code into the caller. + */ + mb(); return; + } pending = 0; diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index cb9ab54146c..9b34fe65949 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -14,7 +14,7 @@ #include <sys/mman.h> #include <sys/user.h> #include <sys/time.h> -#include <asm/unistd.h> +#include <sys/syscall.h> #include <asm/types.h> #include "user.h" #include "sysdep/ptrace.h" diff --git a/arch/um/os-Linux/sys-i386/tls.c b/arch/um/os-Linux/sys-i386/tls.c index 6e945ab4584..256532034c6 100644 --- a/arch/um/os-Linux/sys-i386/tls.c +++ b/arch/um/os-Linux/sys-i386/tls.c @@ -1,6 +1,9 @@ #include <errno.h> #include <linux/unistd.h> + #include <sys/syscall.h> +#include <unistd.h> + #include "sysdep/tls.h" #include "user_util.h" diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index 38be096e750..2115b8beb54 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -16,6 +16,7 @@ #include "process.h" #include "kern_constants.h" #include "os.h" +#include "uml-config.h" int set_interval(int is_virtual) { @@ -30,7 +31,7 @@ int set_interval(int is_virtual) return 0; } -#ifdef CONFIG_MODE_TT +#ifdef UML_CONFIG_MODE_TT void enable_timer(void) { set_interval(1); diff --git a/arch/um/os-Linux/tls.c b/arch/um/os-Linux/tls.c index a2de2580b8a..16215b99080 100644 --- a/arch/um/os-Linux/tls.c +++ b/arch/um/os-Linux/tls.c @@ -1,4 +1,5 @@ #include <errno.h> +#include <unistd.h> #include <sys/ptrace.h> #include <sys/syscall.h> #include <asm/ldt.h> diff --git a/arch/um/os-Linux/tt.c b/arch/um/os-Linux/tt.c index 5461a065bbb..3dc3a02d626 100644 --- a/arch/um/os-Linux/tt.c +++ b/arch/um/os-Linux/tt.c @@ -10,7 +10,6 @@ #include <errno.h> #include <stdarg.h> #include <stdlib.h> -#include <setjmp.h> #include <sys/time.h> #include <sys/ptrace.h> #include <linux/ptrace.h> diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c index 3f5b1514e8a..56b8a50e8bc 100644 --- a/arch/um/os-Linux/util.c +++ b/arch/um/os-Linux/util.c @@ -80,11 +80,18 @@ void setup_machinename(char *machine_out) struct utsname host; uname(&host); -#if defined(UML_CONFIG_UML_X86) && !defined(UML_CONFIG_64BIT) +#ifdef UML_CONFIG_UML_X86 +# ifndef UML_CONFIG_64BIT if (!strcmp(host.machine, "x86_64")) { strcpy(machine_out, "i686"); return; } +# else + if (!strcmp(host.machine, "i686")) { + strcpy(machine_out, "x86_64"); + return; + } +# endif #endif strcpy(machine_out, host.machine); } diff --git a/arch/um/sys-i386/unmap.c b/arch/um/sys-i386/unmap.c index 8e55cd5d3d0..1b0ad0e4adc 100644 --- a/arch/um/sys-i386/unmap.c +++ b/arch/um/sys-i386/unmap.c @@ -5,17 +5,20 @@ #include <linux/mman.h> #include <asm/unistd.h> -#include <sys/syscall.h> +static int errno; + +static inline _syscall2(int,munmap,void *,start,size_t,len) +static inline _syscall6(void *,mmap2,void *,addr,size_t,len,int,prot,int,flags,int,fd,off_t,offset) int switcheroo(int fd, int prot, void *from, void *to, int size) { - if (syscall(__NR_munmap, to, size) < 0){ + if(munmap(to, size) < 0){ return(-1); } - if (syscall(__NR_mmap2, to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1 ){ + if(mmap2(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1 ){ return(-1); } - if (syscall(__NR_munmap, from, size) < 0){ + if(munmap(from, size) < 0){ return(-1); } return(0); diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index 85927380820..12c593607c5 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -14,6 +14,3 @@ EXPORT_SYMBOL(__up_wakeup); /*XXX: we need them because they would be exported by x86_64 */ EXPORT_SYMBOL(__memcpy); - -/* Networking helper routines. */ -EXPORT_SYMBOL(ip_compute_csum); diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c index 1c967026c95..652fa34c2cd 100644 --- a/arch/um/sys-x86_64/stub_segv.c +++ b/arch/um/sys-x86_64/stub_segv.c @@ -5,7 +5,6 @@ #include <stddef.h> #include <signal.h> -#include <linux/compiler.h> #include <asm/unistd.h> #include "uml-config.h" #include "sysdep/sigcontext.h" diff --git a/arch/um/sys-x86_64/unmap.c b/arch/um/sys-x86_64/unmap.c index 57c9286a701..f4a4bffd8a1 100644 --- a/arch/um/sys-x86_64/unmap.c +++ b/arch/um/sys-x86_64/unmap.c @@ -5,17 +5,20 @@ #include <linux/mman.h> #include <asm/unistd.h> -#include <sys/syscall.h> +static int errno; + +static inline _syscall2(int,munmap,void *,start,size_t,len) +static inline _syscall6(void *,mmap,void *,addr,size_t,len,int,prot,int,flags,int,fd,off_t,offset) int switcheroo(int fd, int prot, void *from, void *to, int size) { - if (syscall(__NR_munmap, to, size) < 0){ + if(munmap(to, size) < 0){ return(-1); } - if (syscall(__NR_mmap, to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1){ + if(mmap(to, size, prot, MAP_SHARED | MAP_FIXED, fd, 0) == (void*) -1){ return(-1); } - if (syscall(__NR_munmap, from, size) < 0){ + if(munmap(from, size) < 0){ return(-1); } return(0); diff --git a/arch/v850/kernel/vmlinux.lds.S b/arch/v850/kernel/vmlinux.lds.S index 63399219cd9..88d087f527c 100644 --- a/arch/v850/kernel/vmlinux.lds.S +++ b/arch/v850/kernel/vmlinux.lds.S @@ -140,13 +140,7 @@ ___setup_end = . ; \ ___initcall_start = . ; \ *(.initcall.init) \ - *(.initcall1.init) \ - *(.initcall2.init) \ - *(.initcall3.init) \ - *(.initcall4.init) \ - *(.initcall5.init) \ - *(.initcall6.init) \ - *(.initcall7.init) \ + INITCALLS \ . = ALIGN (4) ; \ ___initcall_end = . ; \ ___con_initcall_start = .; \ diff --git a/arch/x86_64/Makefile b/arch/x86_64/Makefile index 1c0f18d4f88..6e38d4daeed 100644 --- a/arch/x86_64/Makefile +++ b/arch/x86_64/Makefile @@ -54,6 +54,10 @@ endif cflags-y += $(call cc-option,-funit-at-a-time) # prevent gcc from generating any FP code by mistake cflags-y += $(call cc-option,-mno-sse -mno-mmx -mno-sse2 -mno-3dnow,) +# this works around some issues with generating unwind tables in older gccs +# newer gccs do it by default +cflags-y += -maccumulate-outgoing-args + # do binutils support CFI? cflags-y += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) @@ -62,8 +66,8 @@ AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_endproc,-DCONFIG_AS_CFI=1,) cflags-y += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) AFLAGS += $(call as-instr,.cfi_startproc\n.cfi_signal_frame\n.cfi_endproc,-DCONFIG_AS_CFI_SIGNAL_FRAME=1,) -cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector ) -cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh $(CC) -fstack-protector-all ) +cflags-$(CONFIG_CC_STACKPROTECTOR) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector ) +cflags-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh "$(CC)" -fstack-protector-all ) CFLAGS += $(cflags-y) CFLAGS_KERNEL += $(cflags-kernel-y) diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index c3bfd223ab4..770940cc010 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -836,13 +836,12 @@ gdt: .word 0x9200 # data read/write .word 0x00CF # granularity = 4096, 386 # (+5th nibble of limit) +gdt_end: idt_48: .word 0 # idt limit = 0 .word 0, 0 # idt base = 0L gdt_48: - .word 0x8000 # gdt limit=2048, - # 256 GDT entries - + .word gdt_end-gdt-1 # gdt limit .word 0, 0 # gdt base (filled in later) # Include video setup & detection code diff --git a/arch/x86_64/defconfig b/arch/x86_64/defconfig index 47bfba6e9dc..0f5d44e86be 100644 --- a/arch/x86_64/defconfig +++ b/arch/x86_64/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc1 -# Thu Oct 5 13:04:43 2006 +# Linux kernel version: 2.6.19-rc2-git4 +# Sat Oct 21 03:38:52 2006 # CONFIG_X86_64=y CONFIG_64BIT=y @@ -335,8 +335,8 @@ CONFIG_IPV6=y # CONFIG_INET6_XFRM_MODE_TUNNEL is not set # CONFIG_INET6_XFRM_MODE_BEET is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=y # CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_SUBTREES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set @@ -438,6 +438,13 @@ CONFIG_BLK_DEV_INITRD=y # CONFIG_ATA_OVER_ETH is not set # +# Misc devices +# +# CONFIG_IBM_ASM is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set + +# # ATA/ATAPI/MFM/RLL support # CONFIG_IDE=y @@ -1008,6 +1015,7 @@ CONFIG_I2C_ISA=m # # Dallas's 1-wire bus # +# CONFIG_W1 is not set # # Hardware Monitoring support @@ -1059,12 +1067,6 @@ CONFIG_SENSORS_SMSC47B397=m # CONFIG_HWMON_DEBUG_CHIP is not set # -# Misc devices -# -# CONFIG_IBM_ASM is not set -# CONFIG_TIFM_CORE is not set - -# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -1196,7 +1198,6 @@ CONFIG_USB_HIDINPUT=y # CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_TRANCEVIBRATOR is not set # # USB Imaging devices @@ -1242,6 +1243,7 @@ CONFIG_USB_MON=y # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_TEST is not set # @@ -1318,6 +1320,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y @@ -1341,6 +1344,7 @@ CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -1418,7 +1422,6 @@ CONFIG_SUNRPC=y # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set # CONFIG_9P_FS is not set -CONFIG_GENERIC_ACL=y # # Partition Types @@ -1471,10 +1474,6 @@ CONFIG_NLS_ISO8859_15=y CONFIG_NLS_UTF8=y # -# Distributed Lock Manager -# - -# # Instrumentation Support # CONFIG_PROFILING=y @@ -1512,6 +1511,7 @@ CONFIG_DEBUG_FS=y CONFIG_UNWIND_INFO=y CONFIG_STACK_UNWIND=y # CONFIG_FORCED_INLINING is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_LKDTM is not set # CONFIG_DEBUG_RODATA is not set diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index a6ba9951e86..0e0a266d976 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -579,6 +579,11 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, regs->rsp = (unsigned long) frame; regs->rip = (unsigned long) ka->sa.sa_handler; + /* Make -mregparm=3 work */ + regs->rax = sig; + regs->rdx = (unsigned long) &frame->info; + regs->rcx = (unsigned long) &frame->uc; + asm volatile("movl %0,%%ds" :: "r" (__USER32_DS)); asm volatile("movl %0,%%es" :: "r" (__USER32_DS)); diff --git a/arch/x86_64/ia32/ptrace32.c b/arch/x86_64/ia32/ptrace32.c index 3a7561d4703..04566fe5de4 100644 --- a/arch/x86_64/ia32/ptrace32.c +++ b/arch/x86_64/ia32/ptrace32.c @@ -244,6 +244,8 @@ asmlinkage long sys32_ptrace(long request, u32 pid, u32 addr, u32 data) case PTRACE_DETACH: case PTRACE_SYSCALL: case PTRACE_SETOPTIONS: + case PTRACE_SET_THREAD_AREA: + case PTRACE_GET_THREAD_AREA: return sys_ptrace(request, pid, addr, data); default: diff --git a/arch/x86_64/kernel/e820.c b/arch/x86_64/kernel/e820.c index b3f0908668e..6fe191c5808 100644 --- a/arch/x86_64/kernel/e820.c +++ b/arch/x86_64/kernel/e820.c @@ -54,13 +54,13 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) /* various gunk below that needed for SMP startup */ if (addr < 0x8000) { - *addrp = 0x8000; + *addrp = PAGE_ALIGN(0x8000); return 1; } /* direct mapping tables of the kernel */ if (last >= table_start<<PAGE_SHIFT && addr < table_end<<PAGE_SHIFT) { - *addrp = table_end << PAGE_SHIFT; + *addrp = PAGE_ALIGN(table_end << PAGE_SHIFT); return 1; } @@ -68,18 +68,18 @@ static inline int bad_addr(unsigned long *addrp, unsigned long size) #ifdef CONFIG_BLK_DEV_INITRD if (LOADER_TYPE && INITRD_START && last >= INITRD_START && addr < INITRD_START+INITRD_SIZE) { - *addrp = INITRD_START + INITRD_SIZE; + *addrp = PAGE_ALIGN(INITRD_START + INITRD_SIZE); return 1; } #endif /* kernel code */ - if (last >= __pa_symbol(&_text) && last < __pa_symbol(&_end)) { - *addrp = __pa_symbol(&_end); + if (last >= __pa_symbol(&_text) && addr < __pa_symbol(&_end)) { + *addrp = PAGE_ALIGN(__pa_symbol(&_end)); return 1; } if (last >= ebda_addr && addr < ebda_addr + ebda_size) { - *addrp = ebda_addr + ebda_size; + *addrp = PAGE_ALIGN(ebda_addr + ebda_size); return 1; } @@ -152,7 +152,7 @@ unsigned long __init find_e820_area(unsigned long start, unsigned long end, unsi continue; while (bad_addr(&addr, size) && addr+size <= ei->addr+ei->size) ; - last = addr + size; + last = PAGE_ALIGN(addr) + size; if (last > ei->addr + ei->size) continue; if (last > end) @@ -278,7 +278,7 @@ e820_register_active_regions(int nid, unsigned long start_pfn, >> PAGE_SHIFT; /* Skip map entries smaller than a page */ - if (ei_startpfn > ei_endpfn) + if (ei_startpfn >= ei_endpfn) continue; /* Check if end_pfn_map should be updated */ @@ -594,7 +594,9 @@ static int __init parse_memmap_opt(char *p) * size before original memory map is * reset. */ + e820_register_active_regions(0, 0, -1UL); saved_max_pfn = e820_end_of_ram(); + remove_all_active_ranges(); #endif end_pfn_map = 0; e820.nr_map = 0; diff --git a/arch/x86_64/kernel/early-quirks.c b/arch/x86_64/kernel/early-quirks.c index 208e38a372c..68273bff58c 100644 --- a/arch/x86_64/kernel/early-quirks.c +++ b/arch/x86_64/kernel/early-quirks.c @@ -45,7 +45,13 @@ static void nvidia_bugs(void) /* * All timer overrides on Nvidia are * wrong unless HPET is enabled. + * Unfortunately that's not true on many Asus boards. + * We don't know yet how to detect this automatically, but + * at least allow a command line override. */ + if (acpi_use_timer_override) + return; + nvidia_hpet_detected = 0; acpi_table_parse(ACPI_HPET, nvidia_hpet_check); if (nvidia_hpet_detected == 0) { @@ -53,6 +59,8 @@ static void nvidia_bugs(void) printk(KERN_INFO "Nvidia board " "detected. Ignoring ACPI " "timer override.\n"); + printk(KERN_INFO "If you got timer trouble " + "try acpi_use_timer_override\n"); } #endif /* RED-PEN skip them on mptables too? */ @@ -61,10 +69,11 @@ static void nvidia_bugs(void) static void ati_bugs(void) { -#if 1 /* for testing */ - printk("ATI board detected\n"); -#endif - /* No bugs right now */ + if (timer_over_8254 == 1) { + timer_over_8254 = 0; + printk(KERN_INFO + "ATI board detected. Disabling timer routing over 8254.\n"); + } } struct chipset { diff --git a/arch/x86_64/kernel/entry.S b/arch/x86_64/kernel/entry.S index 38a7b2d528e..7d401b00d82 100644 --- a/arch/x86_64/kernel/entry.S +++ b/arch/x86_64/kernel/entry.S @@ -315,6 +315,8 @@ tracesys: LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */ RESTORE_REST cmpq $__NR_syscall_max,%rax + movq $-ENOSYS,%rcx + cmova %rcx,%rax ja 1f movq %r10,%rcx /* fixup for C */ call *sys_call_table(,%rax,8) @@ -535,8 +537,6 @@ END(stub_rt_sigreturn) 1: incl %gs:pda_irqcount cmoveq %gs:pda_irqstackptr,%rsp push %rbp # backlink for old unwinder - CFI_ADJUST_CFA_OFFSET 8 - CFI_REL_OFFSET rbp,0 /* * We entered an interrupt context - irqs are off: */ @@ -980,11 +980,6 @@ ENTRY(kernel_thread) call do_fork movq %rax,RAX(%rsp) xorl %edi,%edi - test %rax,%rax - jnz 1f - /* terminate stack in child */ - movq %rdi,RIP(%rsp) -1: /* * It isn't worth to check for reschedule here, @@ -1176,7 +1171,6 @@ ENTRY(call_softirq) incl %gs:pda_irqcount cmove %gs:pda_irqstackptr,%rsp push %rbp # backlink for old unwinder - CFI_ADJUST_CFA_OFFSET 8 call __do_softirq leaveq CFI_DEF_CFA_REGISTER rsp diff --git a/arch/x86_64/kernel/genapic_flat.c b/arch/x86_64/kernel/genapic_flat.c index 0dfc223c183..7c01db8fa9d 100644 --- a/arch/x86_64/kernel/genapic_flat.c +++ b/arch/x86_64/kernel/genapic_flat.c @@ -153,7 +153,7 @@ struct genapic apic_flat = { static cpumask_t physflat_target_cpus(void) { - return cpumask_of_cpu(0); + return cpu_online_map; } static cpumask_t physflat_vector_allocation_domain(int cpu) diff --git a/arch/x86_64/kernel/i8259.c b/arch/x86_64/kernel/i8259.c index 0612a33bb89..c4ef801b765 100644 --- a/arch/x86_64/kernel/i8259.c +++ b/arch/x86_64/kernel/i8259.c @@ -178,7 +178,8 @@ void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); io_apic_irqs &= ~(1<<irq); - set_irq_chip_and_handler(irq, &i8259A_chip, handle_level_irq); + set_irq_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq, + "XT"); enable_irq(irq); } @@ -431,8 +432,8 @@ void __init init_ISA_irqs (void) /* * 16 old-style INTA-cycle interrupts: */ - set_irq_chip_and_handler(i, &i8259A_chip, - handle_level_irq); + set_irq_chip_and_handler_name(i, &i8259A_chip, + handle_level_irq, "XT"); } else { /* * 'high' PCI IRQs filled in on demand diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 771bcf77daf..14654e68241 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -57,13 +57,13 @@ static int no_timer_check; static int disable_timer_pin_1 __initdata; -int timer_over_8254 __initdata = 0; +int timer_over_8254 __initdata = 1; /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); +DEFINE_SPINLOCK(vector_lock); /* * # of IRQ routing registers @@ -88,6 +88,52 @@ static struct irq_pin_list { short apic, pin, next; } irq_2_pin[PIN_MAP_SIZE]; +struct io_apic { + unsigned int index; + unsigned int unused[3]; + unsigned int data; +}; + +static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) +{ + return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + + (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK); +} + +static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + return readl(&io_apic->data); +} + +static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(reg, &io_apic->index); + writel(value, &io_apic->data); +} + +/* + * Re-write a value: to be used for read-modify-write + * cycles where the read already set up the index register. + */ +static inline void io_apic_modify(unsigned int apic, unsigned int value) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + writel(value, &io_apic->data); +} + +/* + * Synchronize the IO-APIC and the CPU by doing + * a dummy read from the IO-APIC + */ +static inline void io_apic_sync(unsigned int apic) +{ + struct io_apic __iomem *io_apic = io_apic_base(apic); + readl(&io_apic->data); +} + #define __DO_ACTION(R, ACTION, FINAL) \ \ { \ @@ -126,12 +172,34 @@ static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) return eu.entry; } +/* + * When we write a new IO APIC routing entry, we need to write the high + * word first! If the mask bit in the low word is clear, we will enable + * the interrupt, and we need to make sure the entry is fully populated + * before that happens. + */ static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { unsigned long flags; union entry_union eu; eu.entry = e; spin_lock_irqsave(&ioapic_lock, flags); + io_apic_write(apic, 0x11 + 2*pin, eu.w2); + io_apic_write(apic, 0x10 + 2*pin, eu.w1); + spin_unlock_irqrestore(&ioapic_lock, flags); +} + +/* + * When we mask an IO APIC routing entry, we need to write the low + * word first, in order to set the mask bit before we change the + * high bits! + */ +static void ioapic_mask_entry(int apic, int pin) +{ + unsigned long flags; + union entry_union eu = { .entry.mask = 1 }; + + spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x10 + 2*pin, eu.w1); io_apic_write(apic, 0x11 + 2*pin, eu.w2); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -256,9 +324,7 @@ static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) /* * Disable it in the IO-APIC irq-routing table: */ - memset(&entry, 0, sizeof(entry)); - entry.mask = 1; - ioapic_write_entry(apic, pin, entry); + ioapic_mask_entry(apic, pin); } static void clear_IO_APIC (void) @@ -612,15 +678,15 @@ static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result) * Also, we've got to be careful not to trash gate * 0x80, because int 0x80 is hm, kind of importantish. ;) */ - static struct { - int vector; - int offset; - } pos[NR_CPUS] = { [ 0 ... NR_CPUS - 1] = {FIRST_DEVICE_VECTOR, 0} }; + static int current_vector = FIRST_DEVICE_VECTOR, current_offset = 0; int old_vector = -1; int cpu; BUG_ON((unsigned)irq >= NR_IRQ_VECTORS); + /* Only try and allocate irqs on cpus that are present */ + cpus_and(mask, mask, cpu_online_map); + if (irq_vector[irq] > 0) old_vector = irq_vector[irq]; if (old_vector > 0) { @@ -630,15 +696,15 @@ static int __assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result) } for_each_cpu_mask(cpu, mask) { - cpumask_t domain; - int first, new_cpu; + cpumask_t domain, new_mask; + int new_cpu; int vector, offset; domain = vector_allocation_domain(cpu); - first = first_cpu(domain); + cpus_and(new_mask, domain, cpu_online_map); - vector = pos[first].vector; - offset = pos[first].offset; + vector = current_vector; + offset = current_offset; next: vector += 8; if (vector >= FIRST_SYSTEM_VECTOR) { @@ -646,24 +712,24 @@ next: offset = (offset + 1) % 8; vector = FIRST_DEVICE_VECTOR + offset; } - if (unlikely(pos[first].vector == vector)) + if (unlikely(current_vector == vector)) continue; if (vector == IA32_SYSCALL_VECTOR) goto next; - for_each_cpu_mask(new_cpu, domain) - if (per_cpu(vector_irq, cpu)[vector] != -1) + for_each_cpu_mask(new_cpu, new_mask) + if (per_cpu(vector_irq, new_cpu)[vector] != -1) goto next; /* Found one! */ - for_each_cpu_mask(new_cpu, domain) { - pos[cpu].vector = vector; - pos[cpu].offset = offset; - } + current_vector = vector; + current_offset = offset; if (old_vector >= 0) { + cpumask_t old_mask; int old_cpu; - for_each_cpu_mask(old_cpu, domain) + cpus_and(old_mask, irq_domain[irq], cpu_online_map); + for_each_cpu_mask(old_cpu, old_mask) per_cpu(vector_irq, old_cpu)[old_vector] = -1; } - for_each_cpu_mask(new_cpu, domain) + for_each_cpu_mask(new_cpu, new_mask) per_cpu(vector_irq, new_cpu)[vector] = irq; irq_vector[irq] = vector; irq_domain[irq] = domain; @@ -684,6 +750,32 @@ static int assign_irq_vector(int irq, cpumask_t mask, cpumask_t *result) return vector; } +void __setup_vector_irq(int cpu) +{ + /* Initialize vector_irq on a new cpu */ + /* This function must be called with vector_lock held */ + unsigned long flags; + int irq, vector; + + + /* Mark the inuse vectors */ + for (irq = 0; irq < NR_IRQ_VECTORS; ++irq) { + if (!cpu_isset(cpu, irq_domain[irq])) + continue; + vector = irq_vector[irq]; + per_cpu(vector_irq, cpu)[vector] = irq; + } + /* Mark the free vectors */ + for (vector = 0; vector < NR_VECTORS; ++vector) { + irq = per_cpu(vector_irq, cpu)[vector]; + if (irq < 0) + continue; + if (!cpu_isset(cpu, irq_domain[irq])) + per_cpu(vector_irq, cpu)[vector] = -1; + } +} + + extern void (*interrupt[NR_IRQS])(void); static struct irq_chip ioapic_chip; @@ -696,11 +788,13 @@ static void ioapic_register_intr(int irq, int vector, unsigned long trigger) { if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || trigger == IOAPIC_LEVEL) - set_irq_chip_and_handler(irq, &ioapic_chip, - handle_fasteoi_irq); - else - set_irq_chip_and_handler(irq, &ioapic_chip, - handle_edge_irq); + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_fasteoi_irq, "fasteoi"); + else { + irq_desc[irq].status |= IRQ_DELAYED_DISABLE; + set_irq_chip_and_handler_name(irq, &ioapic_chip, + handle_edge_irq, "edge"); + } } static void __init setup_IO_APIC_irqs(void) @@ -806,7 +900,7 @@ static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, in * The timer IRQ doesn't have to know that behind the * scene we have a 8259A-master in AEOI mode ... */ - set_irq_chip_and_handler(0, &ioapic_chip, handle_edge_irq); + set_irq_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); /* * Add it to the IO-APIC irq-routing table: @@ -1255,12 +1349,15 @@ static int ioapic_retrigger_irq(unsigned int irq) { cpumask_t mask; unsigned vector; + unsigned long flags; + spin_lock_irqsave(&vector_lock, flags); vector = irq_vector[irq]; cpus_clear(mask); - cpu_set(vector >> 8, mask); + cpu_set(first_cpu(irq_domain[irq]), mask); - send_IPI_mask(mask, vector & 0xff); + send_IPI_mask(mask, vector); + spin_unlock_irqrestore(&vector_lock, flags); return 1; } @@ -1839,7 +1936,7 @@ int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev) write_msi_msg(irq, &msg); - set_irq_chip_and_handler(irq, &msi_chip, handle_edge_irq); + set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge"); return 0; } @@ -1860,18 +1957,16 @@ void arch_teardown_msi_irq(unsigned int irq) static void target_ht_irq(unsigned int irq, unsigned int dest, u8 vector) { - u32 low, high; - low = read_ht_irq_low(irq); - high = read_ht_irq_high(irq); + struct ht_irq_msg msg; + fetch_ht_irq_msg(irq, &msg); - low &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); - high &= ~(HT_IRQ_HIGH_DEST_ID_MASK); + msg.address_lo &= ~(HT_IRQ_LOW_VECTOR_MASK | HT_IRQ_LOW_DEST_ID_MASK); + msg.address_hi &= ~(HT_IRQ_HIGH_DEST_ID_MASK); - low |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); - high |= HT_IRQ_HIGH_DEST_ID(dest); + msg.address_lo |= HT_IRQ_LOW_VECTOR(vector) | HT_IRQ_LOW_DEST_ID(dest); + msg.address_hi |= HT_IRQ_HIGH_DEST_ID(dest); - write_ht_irq_low(irq, low); - write_ht_irq_high(irq, high); + write_ht_irq_msg(irq, &msg); } static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) @@ -1892,12 +1987,12 @@ static void set_ht_irq_affinity(unsigned int irq, cpumask_t mask) dest = cpu_mask_to_apicid(tmp); - target_ht_irq(irq, dest, vector & 0xff); + target_ht_irq(irq, dest, vector); set_native_irq_info(irq, mask); } #endif -static struct hw_interrupt_type ht_irq_chip = { +static struct irq_chip ht_irq_chip = { .name = "PCI-HT", .mask = mask_ht_irq, .unmask = unmask_ht_irq, @@ -1915,14 +2010,15 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) vector = assign_irq_vector(irq, TARGET_CPUS, &tmp); if (vector >= 0) { - u32 low, high; + struct ht_irq_msg msg; unsigned dest; dest = cpu_mask_to_apicid(tmp); - high = HT_IRQ_HIGH_DEST_ID(dest); + msg.address_hi = HT_IRQ_HIGH_DEST_ID(dest); - low = HT_IRQ_LOW_BASE | + msg.address_lo = + HT_IRQ_LOW_BASE | HT_IRQ_LOW_DEST_ID(dest) | HT_IRQ_LOW_VECTOR(vector) | ((INT_DEST_MODE == 0) ? @@ -1931,12 +2027,13 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) HT_IRQ_LOW_RQEOI_EDGE | ((INT_DELIVERY_MODE != dest_LowestPrio) ? HT_IRQ_LOW_MT_FIXED : - HT_IRQ_LOW_MT_ARBITRATED); + HT_IRQ_LOW_MT_ARBITRATED) | + HT_IRQ_LOW_IRQ_MASKED; - write_ht_irq_low(irq, low); - write_ht_irq_high(irq, high); + write_ht_irq_msg(irq, &msg); - set_irq_chip_and_handler(irq, &ht_irq_chip, handle_edge_irq); + set_irq_chip_and_handler_name(irq, &ht_irq_chip, + handle_edge_irq, "edge"); } return vector; } diff --git a/arch/x86_64/kernel/irq.c b/arch/x86_64/kernel/irq.c index dff68eb2b78..e46c55856d4 100644 --- a/arch/x86_64/kernel/irq.c +++ b/arch/x86_64/kernel/irq.c @@ -75,7 +75,7 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %8s", irq_desc[i].chip->name); - seq_printf(p, "-%s", handle_irq_name(irq_desc[i].handle_irq)); + seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/x86_64/kernel/pci-calgary.c b/arch/x86_64/kernel/pci-calgary.c index b3296cc2f2f..37a770859e7 100644 --- a/arch/x86_64/kernel/pci-calgary.c +++ b/arch/x86_64/kernel/pci-calgary.c @@ -52,7 +52,8 @@ #define ONE_BASED_CHASSIS_NUM 1 /* register offsets inside the host bridge space */ -#define PHB_CSR_OFFSET 0x0110 +#define CALGARY_CONFIG_REG 0x0108 +#define PHB_CSR_OFFSET 0x0110 /* Channel Status */ #define PHB_PLSSR_OFFSET 0x0120 #define PHB_CONFIG_RW_OFFSET 0x0160 #define PHB_IOBASE_BAR_LOW 0x0170 @@ -83,6 +84,8 @@ #define TAR_VALID 0x0000000000000008UL /* CSR (Channel/DMA Status Register) */ #define CSR_AGENT_MASK 0xffe0ffff +/* CCR (Calgary Configuration Register) */ +#define CCR_2SEC_TIMEOUT 0x000000000000000EUL #define MAX_NUM_OF_PHBS 8 /* how many PHBs in total? */ #define MAX_NUM_CHASSIS 8 /* max number of chassis */ @@ -732,6 +735,38 @@ static void calgary_watchdog(unsigned long data) } } +static void __init calgary_increase_split_completion_timeout(void __iomem *bbar, + unsigned char busnum) +{ + u64 val64; + void __iomem *target; + unsigned long phb_shift = -1; + u64 mask; + + switch (busno_to_phbid(busnum)) { + case 0: phb_shift = (63 - 19); + break; + case 1: phb_shift = (63 - 23); + break; + case 2: phb_shift = (63 - 27); + break; + case 3: phb_shift = (63 - 35); + break; + default: + BUG_ON(busno_to_phbid(busnum)); + } + + target = calgary_reg(bbar, CALGARY_CONFIG_REG); + val64 = be64_to_cpu(readq(target)); + + /* zero out this PHB's timer bits */ + mask = ~(0xFUL << phb_shift); + val64 &= mask; + val64 |= (CCR_2SEC_TIMEOUT << phb_shift); + writeq(cpu_to_be64(val64), target); + readq(target); /* flush */ +} + static void __init calgary_enable_translation(struct pci_dev *dev) { u32 val32; @@ -756,6 +791,13 @@ static void __init calgary_enable_translation(struct pci_dev *dev) writel(cpu_to_be32(val32), target); readl(target); /* flush */ + /* + * Give split completion a longer timeout on bus 1 for aic94xx + * http://bugzilla.kernel.org/show_bug.cgi?id=7180 + */ + if (busnum == 1) + calgary_increase_split_completion_timeout(bbar, busnum); + init_timer(&tbl->watchdog_timer); tbl->watchdog_timer.function = &calgary_watchdog; tbl->watchdog_timer.data = (unsigned long)dev; diff --git a/arch/x86_64/kernel/process.c b/arch/x86_64/kernel/process.c index 5e95b257ee2..7451a4c43c1 100644 --- a/arch/x86_64/kernel/process.c +++ b/arch/x86_64/kernel/process.c @@ -88,9 +88,8 @@ void enter_idle(void) static void __exit_idle(void) { - if (read_pda(isidle) == 0) + if (test_and_clear_bit_pda(0, isidle) == 0) return; - write_pda(isidle, 0); atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); } @@ -145,7 +144,7 @@ static void poll_idle (void) void cpu_idle_wait(void) { unsigned int cpu, this_cpu = get_cpu(); - cpumask_t map; + cpumask_t map, tmp = current->cpus_allowed; set_cpus_allowed(current, cpumask_of_cpu(this_cpu)); put_cpu(); @@ -168,6 +167,8 @@ void cpu_idle_wait(void) } cpus_and(map, map, cpu_online_map); } while (!cpus_empty(map)); + + set_cpus_allowed(current, tmp); } EXPORT_SYMBOL_GPL(cpu_idle_wait); @@ -238,20 +239,28 @@ void cpu_idle (void) * We execute MONITOR against need_resched and enter optimized wait state * through MWAIT. Whenever someone changes need_resched, we would be woken * up from MWAIT (without an IPI). + * + * New with Core Duo processors, MWAIT can take some hints based on CPU + * capability. */ -static void mwait_idle(void) +void mwait_idle_with_hints(unsigned long eax, unsigned long ecx) { - local_irq_enable(); - - while (!need_resched()) { + if (!need_resched()) { __monitor((void *)¤t_thread_info()->flags, 0, 0); smp_mb(); - if (need_resched()) - break; - __mwait(0, 0); + if (!need_resched()) + __mwait(eax, ecx); } } +/* Default MONITOR/MWAIT with no hints, used for default C1 state */ +static void mwait_idle(void) +{ + local_irq_enable(); + while (!need_resched()) + mwait_idle_with_hints(0,0); +} + void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c) { static int printed; diff --git a/arch/x86_64/kernel/smp.c b/arch/x86_64/kernel/smp.c index 4f67697f503..9f74c883568 100644 --- a/arch/x86_64/kernel/smp.c +++ b/arch/x86_64/kernel/smp.c @@ -376,9 +376,8 @@ int smp_call_function_single (int cpu, void (*func) (void *info), void *info, /* prevent preemption and reschedule on another processor */ int me = get_cpu(); if (cpu == me) { - WARN_ON(1); put_cpu(); - return -EBUSY; + return 0; } spin_lock_bh(&call_lock); __smp_call_function_single(cpu, func, info, nonatomic, wait); diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index 7b7a6870288..62c2e747af5 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -581,12 +581,16 @@ void __cpuinit start_secondary(void) * smp_call_function(). */ lock_ipi_call_lock(); + spin_lock(&vector_lock); + /* Setup the per cpu irq handling data structures */ + __setup_vector_irq(smp_processor_id()); /* * Allow the master to continue. */ cpu_set(smp_processor_id(), cpu_online_map); per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; + spin_unlock(&vector_lock); unlock_ipi_call_lock(); cpu_idle(); @@ -799,7 +803,6 @@ static int __cpuinit do_boot_cpu(int cpu, int apicid) cpu, node); } - alternatives_smp_switch(1); c_idle.idle = get_idle_for_cpu(cpu); @@ -1246,8 +1249,10 @@ int __cpu_disable(void) local_irq_disable(); remove_siblinginfo(cpu); + spin_lock(&vector_lock); /* It's now safe to remove this processor from the online map */ cpu_clear(cpu, cpu_online_map); + spin_unlock(&vector_lock); remove_cpu_from_maps(); fixup_irqs(cpu_online_map); return 0; diff --git a/arch/x86_64/kernel/time.c b/arch/x86_64/kernel/time.c index 1ba5a442ac3..e3ef544d2cf 100644 --- a/arch/x86_64/kernel/time.c +++ b/arch/x86_64/kernel/time.c @@ -876,15 +876,6 @@ static struct irqaction irq0 = { timer_interrupt, IRQF_DISABLED, CPU_MASK_NONE, "timer", NULL, NULL }; -static int __cpuinit -time_cpu_notifier(struct notifier_block *nb, unsigned long action, void *hcpu) -{ - unsigned cpu = (unsigned long) hcpu; - if (action == CPU_ONLINE) - vsyscall_set_cpu(cpu); - return NOTIFY_DONE; -} - void __init time_init(void) { if (nohpet) @@ -925,8 +916,6 @@ void __init time_init(void) vxtime.last_tsc = get_cycles_sync(); set_cyc2ns_scale(cpu_khz); setup_irq(0, &irq0); - hotcpu_notifier(time_cpu_notifier, 0); - time_cpu_notifier(NULL, CPU_ONLINE, (void *)(long)smp_processor_id()); #ifndef CONFIG_SMP time_init_gtod(); @@ -948,7 +937,7 @@ __cpuinit int unsynchronized_tsc(void) if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) { #ifdef CONFIG_ACPI /* But TSC doesn't tick in C3 so don't use it there */ - if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 100) + if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000) return 1; #endif return 0; diff --git a/arch/x86_64/kernel/traps.c b/arch/x86_64/kernel/traps.c index 7819022a8db..a153d0a01b7 100644 --- a/arch/x86_64/kernel/traps.c +++ b/arch/x86_64/kernel/traps.c @@ -290,6 +290,12 @@ void dump_trace(struct task_struct *tsk, struct pt_regs *regs, unsigned long * s if (tsk && tsk != current) stack = (unsigned long *)tsk->thread.rsp; } + /* + * Align the stack pointer on word boundary, later loops + * rely on that (and corruption / debug info bugs can cause + * unaligned values here): + */ + stack = (unsigned long *)((unsigned long)stack & ~(sizeof(long)-1)); /* * Print function call entries within a stack. 'cond' is the diff --git a/arch/x86_64/kernel/vmlinux.lds.S b/arch/x86_64/kernel/vmlinux.lds.S index b9df2ab6529..d9534e750d4 100644 --- a/arch/x86_64/kernel/vmlinux.lds.S +++ b/arch/x86_64/kernel/vmlinux.lds.S @@ -17,6 +17,7 @@ PHDRS { text PT_LOAD FLAGS(5); /* R_E */ data PT_LOAD FLAGS(7); /* RWE */ user PT_LOAD FLAGS(7); /* RWE */ + data.init PT_LOAD FLAGS(7); /* RWE */ note PT_NOTE FLAGS(4); /* R__ */ } SECTIONS @@ -59,6 +60,7 @@ SECTIONS } #endif + . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */ /* Data */ .data : AT(ADDR(.data) - LOAD_OFFSET) { *(.data) @@ -131,7 +133,7 @@ SECTIONS . = ALIGN(8192); /* init_task */ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) { *(.data.init_task) - } :data + }:data.init . = ALIGN(4096); .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) { @@ -174,13 +176,7 @@ SECTIONS __setup_end = .; __initcall_start = .; .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; __con_initcall_start = .; diff --git a/arch/x86_64/kernel/vsmp.c b/arch/x86_64/kernel/vsmp.c index 044e852bd25..414caf0c5f9 100644 --- a/arch/x86_64/kernel/vsmp.c +++ b/arch/x86_64/kernel/vsmp.c @@ -14,6 +14,7 @@ #include <linux/pci_ids.h> #include <linux/pci_regs.h> #include <asm/pci-direct.h> +#include <asm/io.h> static int __init vsmp_init(void) { diff --git a/arch/x86_64/kernel/vsyscall.c b/arch/x86_64/kernel/vsyscall.c index a98b460af6a..92546c1526f 100644 --- a/arch/x86_64/kernel/vsyscall.c +++ b/arch/x86_64/kernel/vsyscall.c @@ -27,6 +27,9 @@ #include <linux/jiffies.h> #include <linux/sysctl.h> #include <linux/getcpu.h> +#include <linux/cpu.h> +#include <linux/smp.h> +#include <linux/notifier.h> #include <asm/vsyscall.h> #include <asm/pgtable.h> @@ -243,32 +246,17 @@ static ctl_table kernel_root_table2[] = { #endif -static void __cpuinit write_rdtscp_cb(void *info) -{ - write_rdtscp_aux((unsigned long)info); -} - -void __cpuinit vsyscall_set_cpu(int cpu) +/* Assume __initcall executes before all user space. Hopefully kmod + doesn't violate that. We'll find out if it does. */ +static void __cpuinit vsyscall_set_cpu(int cpu) { unsigned long *d; unsigned long node = 0; #ifdef CONFIG_NUMA node = cpu_to_node[cpu]; #endif - if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) { - void *info = (void *)((node << 12) | cpu); - /* Can happen on preemptive kernel */ - if (get_cpu() == cpu) - write_rdtscp_cb(info); -#ifdef CONFIG_SMP - else { - /* the notifier is unfortunately not executed on the - target CPU */ - smp_call_function_single(cpu,write_rdtscp_cb,info,0,1); - } -#endif - put_cpu(); - } + if (cpu_has(&cpu_data[cpu], X86_FEATURE_RDTSCP)) + write_rdtscp_aux((node << 12) | cpu); /* Store cpu number in limit so that it can be loaded quickly in user space in vgetcpu. @@ -280,6 +268,23 @@ void __cpuinit vsyscall_set_cpu(int cpu) *d |= (node >> 4) << 48; } +static void __cpuinit cpu_vsyscall_init(void *arg) +{ + /* preemption should be already off */ + vsyscall_set_cpu(raw_smp_processor_id()); +} + +#ifdef CONFIG_HOTPLUG_CPU +static int __cpuinit +cpu_vsyscall_notifier(struct notifier_block *n, unsigned long action, void *arg) +{ + long cpu = (long)arg; + if (action == CPU_ONLINE) + smp_call_function_single(cpu, cpu_vsyscall_init, NULL, 0, 1); + return NOTIFY_DONE; +} +#endif + static void __init map_vsyscall(void) { extern char __vsyscall_0; @@ -299,6 +304,8 @@ static int __init vsyscall_init(void) #ifdef CONFIG_SYSCTL register_sysctl_table(kernel_root_table2, 0); #endif + on_each_cpu(cpu_vsyscall_init, NULL, 0, 1); + hotcpu_notifier(cpu_vsyscall_notifier, 0); return 0; } diff --git a/arch/x86_64/mm/init.c b/arch/x86_64/mm/init.c index 19c72520a86..4c0c00ef3ca 100644 --- a/arch/x86_64/mm/init.c +++ b/arch/x86_64/mm/init.c @@ -406,9 +406,12 @@ void __cpuinit zap_low_mappings(int cpu) #ifndef CONFIG_NUMA void __init paging_init(void) { - unsigned long max_zone_pfns[MAX_NR_ZONES] = {MAX_DMA_PFN, - MAX_DMA32_PFN, - end_pfn}; + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN; + max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; + max_zone_pfns[ZONE_NORMAL] = end_pfn; + memory_present(0, 0, end_pfn); sparse_init(); free_area_init_nodes(max_zone_pfns); @@ -493,7 +496,7 @@ int remove_memory(u64 start, u64 size) } EXPORT_SYMBOL_GPL(remove_memory); -#ifndef CONFIG_ACPI_NUMA +#if !defined(CONFIG_ACPI_NUMA) && defined(CONFIG_NUMA) int memory_add_physaddr_to_nid(u64 start) { return 0; @@ -501,13 +504,6 @@ int memory_add_physaddr_to_nid(u64 start) EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif -#ifndef CONFIG_ACPI_NUMA -int memory_add_physaddr_to_nid(u64 start) -{ - return 0; -} -#endif - #endif /* CONFIG_MEMORY_HOTPLUG */ #ifdef CONFIG_MEMORY_HOTPLUG_RESERVE @@ -652,9 +648,22 @@ void free_initrd_mem(unsigned long start, unsigned long end) void __init reserve_bootmem_generic(unsigned long phys, unsigned len) { - /* Should check here against the e820 map to avoid double free */ #ifdef CONFIG_NUMA int nid = phys_to_nid(phys); +#endif + unsigned long pfn = phys >> PAGE_SHIFT; + if (pfn >= end_pfn) { + /* This can happen with kdump kernels when accessing firmware + tables. */ + if (pfn < end_pfn_map) + return; + printk(KERN_ERR "reserve_bootmem: illegal reserve %lx %u\n", + phys, len); + return; + } + + /* Should check here against the e820 map to avoid double free */ +#ifdef CONFIG_NUMA reserve_bootmem_node(NODE_DATA(nid), phys, len); #else reserve_bootmem(phys, len); diff --git a/arch/x86_64/mm/numa.c b/arch/x86_64/mm/numa.c index 829a008bd39..2ee2e003606 100644 --- a/arch/x86_64/mm/numa.c +++ b/arch/x86_64/mm/numa.c @@ -338,9 +338,11 @@ static void __init arch_sparse_init(void) void __init paging_init(void) { int i; - unsigned long max_zone_pfns[MAX_NR_ZONES] = { MAX_DMA_PFN, - MAX_DMA32_PFN, - end_pfn}; + unsigned long max_zone_pfns[MAX_NR_ZONES]; + memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); + max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN; + max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN; + max_zone_pfns[ZONE_NORMAL] = end_pfn; arch_sparse_init(); diff --git a/arch/x86_64/mm/srat.c b/arch/x86_64/mm/srat.c index 3cc0544e25f..1087e150a21 100644 --- a/arch/x86_64/mm/srat.c +++ b/arch/x86_64/mm/srat.c @@ -207,7 +207,7 @@ static inline int save_add_info(void) return hotadd_percent > 0; } #else -int update_end_of_memory(unsigned long end) {return 0;} +int update_end_of_memory(unsigned long end) {return -1;} static int hotadd_enough_memory(struct bootnode *nd) {return 1;} #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE static inline int save_add_info(void) {return 1;} @@ -337,7 +337,7 @@ acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma) push_node_boundaries(node, nd->start >> PAGE_SHIFT, nd->end >> PAGE_SHIFT); - if (ma->flags.hot_pluggable && !reserve_hotadd(node, start, end) < 0) { + if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) { /* Ignore hotadd region. Undo damage */ printk(KERN_NOTICE "SRAT: Hotplug region ignored\n"); *nd = oldnode; diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile index 1eb18f421ed..149aba05a5b 100644 --- a/arch/x86_64/pci/Makefile +++ b/arch/x86_64/pci/Makefile @@ -3,7 +3,7 @@ # # Reuse the i386 PCI subsystem # -CFLAGS += -Iarch/i386/pci +EXTRA_CFLAGS += -Iarch/i386/pci obj-y := i386.o obj-$(CONFIG_PCI_DIRECT)+= direct.o diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c index 7732f4254d2..f8b6b2800a6 100644 --- a/arch/x86_64/pci/mmconfig.c +++ b/arch/x86_64/pci/mmconfig.c @@ -163,37 +163,6 @@ static __init void unreachable_devices(void) } } -static __init void pci_mmcfg_insert_resources(void) -{ -#define PCI_MMCFG_RESOURCE_NAME_LEN 19 - int i; - struct resource *res; - char *names; - unsigned num_buses; - - res = kcalloc(PCI_MMCFG_RESOURCE_NAME_LEN + sizeof(*res), - pci_mmcfg_config_num, GFP_KERNEL); - - if (!res) { - printk(KERN_ERR "PCI: Unable to allocate MMCONFIG resources\n"); - return; - } - - names = (void *)&res[pci_mmcfg_config_num]; - for (i = 0; i < pci_mmcfg_config_num; i++, res++) { - num_buses = pci_mmcfg_config[i].end_bus_number - - pci_mmcfg_config[i].start_bus_number + 1; - res->name = names; - snprintf(names, PCI_MMCFG_RESOURCE_NAME_LEN, "PCI MMCONFIG %u", - pci_mmcfg_config[i].pci_segment_group_number); - res->start = pci_mmcfg_config[i].base_address; - res->end = res->start + (num_buses << 20) - 1; - res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; - insert_resource(&iomem_resource, res); - names += PCI_MMCFG_RESOURCE_NAME_LEN; - } -} - void __init pci_mmcfg_init(int type) { int i; @@ -220,7 +189,7 @@ void __init pci_mmcfg_init(int type) pci_mmcfg_virt = kmalloc(sizeof(*pci_mmcfg_virt) * pci_mmcfg_config_num, GFP_KERNEL); if (pci_mmcfg_virt == NULL) { - printk("PCI: Can not allocate memory for mmconfig structures\n"); + printk(KERN_ERR "PCI: Can not allocate memory for mmconfig structures\n"); return; } for (i = 0; i < pci_mmcfg_config_num; ++i) { @@ -228,7 +197,8 @@ void __init pci_mmcfg_init(int type) pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address, MMCONFIG_APER_MAX); if (!pci_mmcfg_virt[i].virt) { - printk("PCI: Cannot map mmconfig aperture for segment %d\n", + printk(KERN_ERR "PCI: Cannot map mmconfig aperture for " + "segment %d\n", pci_mmcfg_config[i].pci_segment_group_number); return; } @@ -236,7 +206,6 @@ void __init pci_mmcfg_init(int type) } unreachable_devices(); - pci_mmcfg_insert_resources(); raw_pci_ops = &pci_mmcfg; pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index ab6cdbd5eb6..cfe75f52872 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -184,13 +184,7 @@ SECTIONS __initcall_start = .; .initcall.init : { - *(.initcall1.init) - *(.initcall2.init) - *(.initcall3.init) - *(.initcall4.init) - *(.initcall5.init) - *(.initcall6.init) - *(.initcall7.init) + INITCALLS } __initcall_end = .; |