diff options
Diffstat (limited to 'arch')
145 files changed, 2515 insertions, 1222 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 24efdfe277f..3e2e540a0f2 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -61,6 +61,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool default y diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h index 440747ca634..5728c52a741 100644 --- a/arch/alpha/include/asm/scatterlist.h +++ b/arch/alpha/include/asm/scatterlist.h @@ -1,24 +1,7 @@ #ifndef _ALPHA_SCATTERLIST_H #define _ALPHA_SCATTERLIST_H -#include <asm/page.h> -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - - unsigned int length; - - dma_addr_t dma_address; - __u32 dma_length; -}; - -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->dma_length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 9236475e713..44cea2ddd22 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:31 2010 +# Fri May 28 19:15:48 2010 # CONFIG_ARM=y CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -186,9 +189,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -224,7 +229,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -233,6 +238,7 @@ CONFIG_ARCH_S3C2410=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -243,11 +249,18 @@ CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_S3C_BOOT_UART_FORCE_FIFO=y CONFIG_S3C_LOWLEVEL_UART_PORT=0 CONFIG_SAMSUNG_CLKSRC=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S3C_GPIO_PULL_UP=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_ADC=y CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HWMON=y +CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y CONFIG_S3C_DMA=y @@ -260,6 +273,7 @@ CONFIG_PLAT_S3C24XX=y CONFIG_CPU_LLSERIAL_S3C2410=y CONFIG_CPU_LLSERIAL_S3C2440=y CONFIG_S3C2410_CLOCK=y +CONFIG_S3C2443_CLOCK=y CONFIG_S3C24XX_DCLK=y CONFIG_S3C24XX_PWM=y CONFIG_S3C24XX_GPIO_EXTRA=128 @@ -270,6 +284,7 @@ CONFIG_S3C2410_DMA=y # CONFIG_S3C2410_DMA_DEBUG is not set CONFIG_MACH_SMDK=y CONFIG_S3C24XX_SIMTEC_AUDIO=y +CONFIG_S3C2410_SETUP_TS=y # # S3C2400 Machines @@ -289,6 +304,7 @@ CONFIG_ARCH_H1940=y # CONFIG_H1940BT is not set CONFIG_PM_H1940=y CONFIG_MACH_N30=y +CONFIG_MACH_N35=y CONFIG_ARCH_BAST=y CONFIG_MACH_OTOM=y CONFIG_MACH_AML_M5900=y @@ -309,6 +325,13 @@ CONFIG_MACH_SMDK2413=y CONFIG_MACH_S3C2413=y CONFIG_MACH_SMDK2412=y CONFIG_MACH_VSTMS=y +CONFIG_CPU_S3C2416=y +CONFIG_S3C2416_DMA=y + +# +# S3C2416 Machines +# +CONFIG_MACH_SMDK2416=y CONFIG_CPU_S3C2440=y CONFIG_CPU_S3C2442=y CONFIG_CPU_S3C244X=y @@ -320,9 +343,9 @@ CONFIG_S3C2440_DMA=y # S3C2440 and S3C2442 Machines # CONFIG_MACH_ANUBIS=y -# CONFIG_MACH_NEO1973_GTA02 is not set +CONFIG_MACH_NEO1973_GTA02=y CONFIG_MACH_OSIRIS=y -# CONFIG_MACH_OSIRIS_DVS is not set +CONFIG_MACH_OSIRIS_DVS=m CONFIG_MACH_RX3715=y CONFIG_ARCH_S3C2440=y CONFIG_MACH_NEXCODER_2440=y @@ -330,6 +353,7 @@ CONFIG_SMDK2440_CPU2440=y CONFIG_SMDK2440_CPU2442=y CONFIG_MACH_AT2440EVB=y CONFIG_MACH_MINI2440=y +CONFIG_MACH_RX1950=y CONFIG_CPU_S3C2443=y CONFIG_S3C2443_DMA=y @@ -410,6 +434,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/hda1 ro init=/bin/bash console=ttySAC0" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -509,7 +534,9 @@ CONFIG_TCP_CONG_ILLINOIS=m # CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y # CONFIG_DEFAULT_HTCP is not set +# CONFIG_DEFAULT_HYBLA is not set # CONFIG_DEFAULT_VEGAS is not set +# CONFIG_DEFAULT_VENO is not set # CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" @@ -566,6 +593,16 @@ CONFIG_NF_CONNTRACK_TFTP=m CONFIG_NF_CT_NETLINK=m # CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m + +# +# Xtables combined modules +# +CONFIG_NETFILTER_XT_MARK=m +CONFIG_NETFILTER_XT_CONNMARK=m + +# +# Xtables targets +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_CT is not set @@ -577,9 +614,14 @@ CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set CONFIG_NETFILTER_XT_TARGET_RATEEST=m +# CONFIG_NETFILTER_XT_TARGET_TEE is not set # CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set + +# +# Xtables matches +# CONFIG_NETFILTER_XT_MATCH_CLUSTER=m CONFIG_NETFILTER_XT_MATCH_COMMENT=m CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m @@ -598,6 +640,7 @@ CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_NETFILTER_XT_MATCH_OWNER=m CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m @@ -605,7 +648,6 @@ CONFIG_NETFILTER_XT_MATCH_QUOTA=m CONFIG_NETFILTER_XT_MATCH_RATEEST=m CONFIG_NETFILTER_XT_MATCH_REALM=m CONFIG_NETFILTER_XT_MATCH_RECENT=m -# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m CONFIG_NETFILTER_XT_MATCH_STATE=m CONFIG_NETFILTER_XT_MATCH_STATISTIC=m @@ -613,7 +655,6 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m -# CONFIG_NETFILTER_XT_MATCH_OSF is not set CONFIG_IP_VS=m # CONFIG_IP_VS_IPV6 is not set # CONFIG_IP_VS_DEBUG is not set @@ -713,6 +754,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_RDS is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +# CONFIG_L2TP is not set # CONFIG_BRIDGE is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set @@ -739,6 +781,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_IRDA is not set CONFIG_BT=m CONFIG_BT_L2CAP=m +# CONFIG_BT_L2CAP_EXT_FEATURES is not set CONFIG_BT_SCO=m CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y @@ -775,6 +818,7 @@ CONFIG_CFG80211_WEXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_LIB80211 is not set CONFIG_MAC80211=m +CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y # CONFIG_MAC80211_RC_DEFAULT_PID is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y @@ -785,6 +829,7 @@ CONFIG_MAC80211_LEDS=y # CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set +# CONFIG_CAIF is not set # # Device Drivers @@ -828,6 +873,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -882,9 +928,12 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -1149,6 +1198,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_LM8323 is not set # CONFIG_KEYBOARD_MAX7359 is not set @@ -1212,6 +1262,7 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879_SPI is not set # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_EETI is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_S3C2410 is not set @@ -1248,6 +1299,7 @@ CONFIG_TOUCHSCREEN_USB_NEXIO=y # CONFIG_TOUCHSCREEN_TSC2007 is not set # CONFIG_TOUCHSCREEN_W90X900 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_AD714X is not set CONFIG_INPUT_ATI_REMOTE=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m @@ -1255,6 +1307,8 @@ CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_UINPUT=m +# CONFIG_INPUT_PCF50633_PMU is not set +# CONFIG_INPUT_PCF8574 is not set CONFIG_INPUT_GPIO_ROTARY_ENCODER=m # @@ -1287,6 +1341,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set # CONFIG_N_HDLC is not set +# CONFIG_N_GSM is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_STALDRV is not set @@ -1324,6 +1379,8 @@ CONFIG_SERIAL_S3C2440=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -1439,7 +1496,16 @@ CONFIG_GPIOLIB=y # AC97 GPIO expanders: # # CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set +CONFIG_POWER_SUPPLY=y +# CONFIG_POWER_SUPPLY_DEBUG is not set +# CONFIG_PDA_POWER is not set +# CONFIG_APM_POWER is not set +# CONFIG_TEST_POWER is not set +# CONFIG_BATTERY_DS2760 is not set +# CONFIG_BATTERY_DS2782 is not set +# CONFIG_BATTERY_BQ27x00 is not set +# CONFIG_BATTERY_MAX17040 is not set +# CONFIG_CHARGER_PCF50633 is not set CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set @@ -1499,6 +1565,7 @@ CONFIG_SENSORS_LM85=m # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set @@ -1555,7 +1622,7 @@ CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_HTC_I2CPLD is not set # CONFIG_UCB1400_CORE is not set -# CONFIG_TPS65010 is not set +CONFIG_TPS65010=m # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set @@ -1568,8 +1635,10 @@ CONFIG_MFD_SM501=y # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set -# CONFIG_MFD_PCF50633 is not set +CONFIG_MFD_PCF50633=y # CONFIG_MFD_MC13783 is not set +# CONFIG_PCF50633_ADC is not set +CONFIG_PCF50633_GPIO=y # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set # CONFIG_AB4500_CORE is not set @@ -1685,6 +1754,7 @@ CONFIG_SND_S3C24XX_SOC_I2S=y CONFIG_SND_S3C_I2SV2_SOC=m CONFIG_SND_S3C2412_SOC_I2S=m CONFIG_SND_S3C_SOC_AC97=m +# CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753 is not set CONFIG_SND_S3C24XX_SOC_JIVE_WM8750=m CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710=m CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650=m @@ -1836,10 +1906,12 @@ CONFIG_USB_SERIAL_PL2303=y # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set +CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m # CONFIG_USB_SERIAL_OMNINET is not set # CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set +# CONFIG_USB_SERIAL_ZIO is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1991,6 +2063,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_RP5C01 is not set # CONFIG_RTC_DRV_V3020 is not set +# CONFIG_RTC_DRV_PCF50633 is not set # # on-CPU RTC drivers @@ -1999,10 +2072,6 @@ CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -2274,6 +2343,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -2284,6 +2354,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index a3a9993e5cd..2b642386f03 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -1,11 +1,14 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:17:32 2010 +# Fri May 28 19:05:39 2010 # CONFIG_ARM=y +CONFIG_HAVE_PWM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -34,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -179,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -217,7 +223,7 @@ CONFIG_MMU=y CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -226,6 +232,7 @@ CONFIG_ARCH_S3C64XX=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -247,11 +254,17 @@ CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set CONFIG_S3C_DEV_HSMMC=y CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DEV_HWMON=y CONFIG_S3C_DEV_I2C1=y CONFIG_S3C_DEV_FB=y CONFIG_S3C_DEV_USB_HOST=y CONFIG_S3C_DEV_USB_HSOTG=y +CONFIG_S3C_DEV_WDT=y CONFIG_S3C_DEV_NAND=y +CONFIG_S3C_DEV_RTC=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y CONFIG_S3C_DMA=y # @@ -260,7 +273,9 @@ CONFIG_S3C_DMA=y # CONFIG_SAMSUNG_PM_DEBUG is not set # CONFIG_S3C_PM_DEBUG_LED_SMDK is not set # CONFIG_SAMSUNG_PM_CHECK is not set +CONFIG_SAMSUNG_WAKEMASK=y CONFIG_PLAT_S3C64XX=y +CONFIG_CPU_S3C6400=y CONFIG_CPU_S3C6410=y CONFIG_S3C64XX_DMA=y CONFIG_S3C64XX_SETUP_SDHCI=y @@ -268,15 +283,18 @@ CONFIG_S3C64XX_SETUP_I2C0=y CONFIG_S3C64XX_SETUP_I2C1=y CONFIG_S3C64XX_SETUP_FB_24BPP=y CONFIG_S3C64XX_SETUP_SDHCI_GPIO=y -# CONFIG_MACH_SMDK6400 is not set -# CONFIG_MACH_ANW6410 is not set +CONFIG_MACH_SMDK6400=y +CONFIG_MACH_ANW6410=y CONFIG_MACH_SMDK6410=y CONFIG_SMDK6410_SD_CH0=y # CONFIG_SMDK6410_SD_CH1 is not set # CONFIG_SMDK6410_WM1190_EV1 is not set # CONFIG_SMDK6410_WM1192_EV1 is not set -# CONFIG_MACH_NCP is not set -# CONFIG_MACH_HMT is not set +CONFIG_MACH_NCP=y +CONFIG_MACH_HMT=y +CONFIG_MACH_SMARTQ=y +CONFIG_MACH_SMARTQ5=y +CONFIG_MACH_SMARTQ7=y # # Processor Type @@ -302,6 +320,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y @@ -352,6 +371,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -430,6 +450,7 @@ CONFIG_MTD=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_SM_FTL is not set # CONFIG_MTD_OOPS is not set # @@ -460,6 +481,9 @@ CONFIG_MTD_CFI_I2=y # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SST25L is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -472,9 +496,12 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_VERIFY_WRITE is not set +CONFIG_MTD_NAND_ECC=y # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_SM_COMMON is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 # CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y CONFIG_MTD_NAND_S3C2410=y @@ -483,6 +510,7 @@ CONFIG_MTD_NAND_S3C2410=y # CONFIG_MTD_NAND_S3C2410_CLKSTOP is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # @@ -503,6 +531,7 @@ CONFIG_BLK_DEV_LOOP=y # # DRBD disabled because PROC_FS, INET or CONNECTOR not selected # +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 @@ -516,12 +545,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_ISL29003 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_DS1682 is not set +# CONFIG_TI_DAC7512 is not set # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_AT25 is not set # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set @@ -569,6 +600,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set # CONFIG_KEYBOARD_MATRIX is not set # CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set @@ -635,9 +667,12 @@ CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y CONFIG_SERIAL_S3C6400=y +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -673,6 +708,7 @@ CONFIG_I2C_S3C2410=y # # CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set # # Other I2C/SMBus bus drivers @@ -682,7 +718,24 @@ CONFIG_I2C_S3C2410=y # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_SPI is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=m +CONFIG_SPI_GPIO=m +CONFIG_SPI_S3C64XX=m +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_DESIGNWARE is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set # # PPS support @@ -714,6 +767,9 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MC33880 is not set # # AC97 GPIO expanders: @@ -729,6 +785,7 @@ CONFIG_HWMON=y # # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set @@ -750,6 +807,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set @@ -764,6 +822,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LTC4215 is not set # CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_LM95241 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -775,6 +834,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_ADS7871 is not set # CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set @@ -788,9 +848,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set +# CONFIG_SENSORS_LIS3_SPI is not set # CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -823,7 +885,10 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_WM8350_I2C is not set # CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set # CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set @@ -832,8 +897,47 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_S3C=y +# CONFIG_FB_S3C_DEBUG_REGWRITE is not set +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set +# CONFIG_FB_BROADSHEET is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +CONFIG_LCD_LTV350QV=y +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_GENERIC=y +CONFIG_BACKLIGHT_PWM=y # # Display device support @@ -845,6 +949,8 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set CONFIG_SOUND=y CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y @@ -873,10 +979,16 @@ CONFIG_SND_DRIVERS=y # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set CONFIG_SND_ARM=y +CONFIG_SND_SPI=y +CONFIG_SND_USB=y +# CONFIG_SND_USB_AUDIO is not set +# CONFIG_SND_USB_UA101 is not set +# CONFIG_SND_USB_CAIAQ is not set CONFIG_SND_SOC=m CONFIG_SND_SOC_AC97_BUS=y CONFIG_SND_S3C24XX_SOC=m CONFIG_SND_S3C_SOC_AC97=m +# CONFIG_SND_S3C64XX_SOC_WM8580 is not set CONFIG_SND_SOC_SMDK_WM9713=m CONFIG_SND_SOC_I2C_AND_SPI=m # CONFIG_SND_SOC_ALL_CODECS is not set @@ -886,29 +998,197 @@ CONFIG_AC97_BUS=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y # CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set # # Special HID drivers # +# CONFIG_HID_3M_PCT is not set +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +# CONFIG_HID_CANDO is not set +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +# CONFIG_HID_PRODIKEYS is not set +CONFIG_HID_CYPRESS=y +# CONFIG_HID_DRAGONRISE is not set +# CONFIG_HID_EGALAX is not set +CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_TWINHAN is not set +CONFIG_HID_KENSINGTON=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +# CONFIG_LOGIG940_FF is not set +CONFIG_HID_MICROSOFT=y +# CONFIG_HID_MOSART is not set +CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_ORTEK is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_PICOLCD is not set +# CONFIG_HID_QUANTA is not set +# CONFIG_HID_ROCCAT_KONE is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_STANTUM is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_HID_GREENASIA is not set +# CONFIG_HID_SMARTJOYPLUS is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_HID_THRUSTMASTER is not set +# CONFIG_HID_ZEROPLUS is not set +# CONFIG_HID_ZYDACRON is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # -# Enable Host or Gadget support to see Inventra options +# Miscellaneous USB options # +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_ISP1362_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set +# CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP210X is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +# CONFIG_USB_SERIAL_MCT_U232 is not set +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_QCAUX is not set +# CONFIG_USB_SERIAL_QUALCOMM is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set +# CONFIG_USB_SERIAL_SYMBOL is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set +# CONFIG_USB_SERIAL_VIVOPAY_SERIAL is not set +# CONFIG_USB_SERIAL_ZIO is not set +# CONFIG_USB_SERIAL_DEBUG is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # # OTG and related infrastructure # +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_USB_ULPI is not set +# CONFIG_NOP_USB_XCEIV is not set CONFIG_MMC=y CONFIG_MMC_DEBUG=y CONFIG_MMC_UNSAFE_RESUME=y @@ -928,18 +1208,80 @@ CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set CONFIG_MMC_SDHCI_S3C=y # CONFIG_MMC_SDHCI_S3C_DMA is not set +# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_BQ32K is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set +# CONFIG_RTC_DRV_RX8025 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set +# CONFIG_RTC_DRV_PCF2123 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_MSM6242 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_RP5C01 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_S3C=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -1033,7 +1375,46 @@ CONFIG_ROMFS_ON_BLOCK=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set # # Kernel hacking @@ -1096,6 +1477,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -1106,6 +1488,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6440_defconfig b/arch/arm/configs/s5p6440_defconfig index 619bfab3ab3..532e987beb4 100644 --- a/arch/arm/configs/s5p6440_defconfig +++ b/arch/arm/configs/s5p6440_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:18 2010 +# Wed May 26 19:04:32 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6440=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,15 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +287,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +339,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -490,7 +504,9 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -546,6 +562,8 @@ CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -593,6 +611,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -649,10 +668,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -850,6 +865,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -860,6 +876,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig index d7ea27509cf..068219b360f 100644 --- a/arch/arm/configs/s5p6442_defconfig +++ b/arch/arm/configs/s5p6442_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:19 2010 +# Wed May 26 19:04:34 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -33,6 +35,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -178,9 +181,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -216,7 +221,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set CONFIG_ARCH_S5P6442=y -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set # CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -225,6 +230,7 @@ CONFIG_ARCH_S5P6442=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -240,10 +246,12 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_PL330_DMA=y # # Power management @@ -276,10 +284,12 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -326,6 +336,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -471,6 +482,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -525,6 +537,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -624,10 +638,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -836,6 +846,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -846,6 +857,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig index 2053be6c9af..ebc6245b9fc 100644 --- a/arch/arm/configs/s5pc100_defconfig +++ b/arch/arm/configs/s5pc100_defconfig @@ -1,12 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.30 -# Wed Jul 1 15:53:07 2009 +# Linux kernel version: 2.6.34 +# Wed May 26 19:04:35 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y -CONFIG_MMU=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y +CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y @@ -18,7 +20,9 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_ARM_L1_CACHE_SHIFT_6=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y @@ -31,6 +35,13 @@ CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set @@ -38,14 +49,15 @@ CONFIG_SWAP=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -59,6 +71,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_RD_GZIP=y CONFIG_RD_BZIP2=y CONFIG_RD_LZMA=y +CONFIG_RD_LZO=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_ANON_INODES=y @@ -80,19 +93,21 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y -# CONFIG_STRIP_ASM_SYMS is not set CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -122,25 +137,56 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -156,6 +202,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -164,39 +211,64 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set CONFIG_ARCH_S5PC100=y +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_PLAT_S3C=y +# CONFIG_PLAT_SPEAR is not set +CONFIG_PLAT_SAMSUNG=y # # Boot options # # CONFIG_S3C_BOOT_ERROR_RESET is not set CONFIG_S3C_BOOT_UART_FORCE_FIFO=y +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_SAMSUNG_CLKSRC=y +CONFIG_SAMSUNG_IRQ_VIC_TIMER=y +CONFIG_SAMSUNG_IRQ_UART=y +CONFIG_SAMSUNG_GPIOLIB_4BIT=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y +CONFIG_SAMSUNG_GPIO_EXTRA=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +# CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_HSMMC2=y +CONFIG_S3C_DEV_I2C1=y +CONFIG_S3C_DEV_FB=y +CONFIG_S3C_PL330_DMA=y # # Power management # -CONFIG_S3C_LOWLEVEL_UART_PORT=0 -CONFIG_S3C_GPIO_SPACE=0 -CONFIG_S3C_GPIO_TRACK=y -CONFIG_S3C_GPIO_PULL_UPDOWN=y -CONFIG_PLAT_S5PC1XX=y -CONFIG_CPU_S5PC100_INIT=y -CONFIG_CPU_S5PC100_CLOCK=y -CONFIG_S5PC100_SETUP_I2C0=y +CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PC100=y +CONFIG_S5PC100_SETUP_FB_24BPP=y +CONFIG_S5PC100_SETUP_I2C1=y +CONFIG_S5PC100_SETUP_SDHCI=y +CONFIG_S5PC100_SETUP_SDHCI_GPIO=y CONFIG_MACH_SMDKC100=y # @@ -206,7 +278,7 @@ CONFIG_CPU_32v6K=y CONFIG_CPU_V7=y CONFIG_CPU_32v7=y CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_PABRT_IFAR=y +CONFIG_CPU_PABRT_V7=y CONFIG_CPU_CACHE_V7=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -224,11 +296,15 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -244,8 +320,11 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_HZ=100 +# CONFIG_THUMB2_KERNEL is not set CONFIG_AEABI=y CONFIG_OABI_COMPAT=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set @@ -258,12 +337,11 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_SPLIT_PTLOCK_CPUS=999999 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y # CONFIG_UACCESS_WITH_MEMCPY is not set @@ -274,6 +352,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -317,6 +396,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_DEVTMPFS is not set CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -331,6 +411,10 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 @@ -338,9 +422,12 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_MG_DISK is not set CONFIG_MISC_DEVICES=y +# CONFIG_AD525X_DPOT is not set # CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_ISL29003 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_DS1682 is not set # CONFIG_C2PORT is not set # @@ -350,18 +437,21 @@ CONFIG_EEPROM_AT24=y # CONFIG_EEPROM_LEGACY is not set # CONFIG_EEPROM_MAX6875 is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_IWMC3200TOP is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_PHONE is not set # # Input device support @@ -369,6 +459,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -385,13 +476,19 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADP5588 is not set CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_QT2160 is not set # CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_TCA6416 is not set +# CONFIG_KEYBOARD_MATRIX is not set +# CONFIG_KEYBOARD_MAX7359 is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_OPENCORES is not set # CONFIG_KEYBOARD_STOWAWAY is not set -# CONFIG_KEYBOARD_GPIO is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y CONFIG_MOUSE_PS2_ALPS=y @@ -399,6 +496,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_SENTELIC is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -418,6 +516,7 @@ CONFIG_SERIO=y CONFIG_SERIO_SERPORT=y CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_RAW is not set +# CONFIG_SERIO_ALTERA_PS2 is not set # CONFIG_GAMEPORT is not set # @@ -444,11 +543,16 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # Non-8250 serial port support # CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_UARTS=3 +CONFIG_SERIAL_SAMSUNG_UARTS_4=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C6400=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -461,6 +565,7 @@ CONFIG_HW_RANDOM=y # CONFIG_TCG_TPM is not set CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_COMPAT=y CONFIG_I2C_CHARDEV=y CONFIG_I2C_HELPER_AUTO=y @@ -471,9 +576,11 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_DESIGNWARE is not set # CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -486,20 +593,15 @@ CONFIG_I2C_HELPER_AUTO=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_DS1682 is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set @@ -508,13 +610,16 @@ CONFIG_GPIOLIB=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set +# CONFIG_GPIO_ADP5588 is not set # # PCI GPIO expanders: @@ -523,10 +628,19 @@ CONFIG_GPIOLIB=y # # SPI GPIO expanders: # + +# +# AC97 GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Native drivers +# # CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set @@ -535,10 +649,11 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7411 is not set # CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set -# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ADT7475 is not set +# CONFIG_SENSORS_ASC7621 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -549,6 +664,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM73 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -573,8 +689,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_AMC6821 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_TMP401 is not set +# CONFIG_SENSORS_TMP421 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set # CONFIG_SENSORS_W83791D is not set @@ -584,9 +702,8 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_SENSORS_LIS3_I2C is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -599,10 +716,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -610,10 +729,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set # CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_AB3100_CORE is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -637,7 +761,6 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y -CONFIG_HID_DEBUG=y # CONFIG_HIDRAW is not set # CONFIG_HID_PID is not set @@ -680,13 +803,12 @@ CONFIG_SDIO_UART=y CONFIG_MMC_SDHCI=y # CONFIG_MMC_SDHCI_PLTFM is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -710,6 +832,7 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -758,6 +881,7 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=y # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -772,7 +896,6 @@ CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # # Partition Types @@ -789,6 +912,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set @@ -826,11 +950,13 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_DEBUG_CREDENTIALS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y @@ -839,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -849,6 +976,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -857,8 +985,9 @@ CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y +# CONFIG_EARLY_PRINTK is not set # CONFIG_DEBUG_ICEDCC is not set -CONFIG_DEBUG_S3C_PORT=y +# CONFIG_OC_ETM is not set CONFIG_DEBUG_S3C_UART=0 # @@ -867,7 +996,11 @@ CONFIG_DEBUG_S3C_UART=0 # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set @@ -884,8 +1017,10 @@ CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y +CONFIG_DECOMPRESS_LZO=y CONFIG_HAS_IOMEM=y CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/s5pc110_defconfig b/arch/arm/configs/s5pc110_defconfig index 796cb78498c..c4de360b0f6 100644 --- a/arch/arm/configs/s5pc110_defconfig +++ b/arch/arm/configs/s5pc110_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:21 2010 +# Wed May 26 19:04:37 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,22 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set # CONFIG_MACH_SMDKV210 is not set CONFIG_MACH_SMDKC110=y @@ -281,12 +293,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +349,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,6 +496,7 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set @@ -536,6 +552,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +601,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +654,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +862,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +874,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/configs/s5pv210_defconfig b/arch/arm/configs/s5pv210_defconfig index 6831dab97d9..e2f5bce2982 100644 --- a/arch/arm/configs/s5pv210_defconfig +++ b/arch/arm/configs/s5pv210_defconfig @@ -1,11 +1,13 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.34 -# Sat May 22 03:18:22 2010 +# Wed May 26 19:04:39 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_ARCH_USES_GETTIMEOFFSET=y CONFIG_HAVE_PROC_CPU=y CONFIG_NO_IOPORT=y CONFIG_GENERIC_HARDIRQS=y @@ -35,6 +37,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_KERNEL_GZIP=y # CONFIG_KERNEL_BZIP2 is not set @@ -180,9 +183,11 @@ CONFIG_MMU=y # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_VEXPRESS is not set # CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CNS3XXX is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set @@ -218,7 +223,7 @@ CONFIG_MMU=y # CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_S5P6440 is not set # CONFIG_ARCH_S5P6442 is not set -# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PC100 is not set CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set @@ -227,6 +232,7 @@ CONFIG_ARCH_S5PV210=y # CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set +# CONFIG_PLAT_SPEAR is not set CONFIG_PLAT_SAMSUNG=y # @@ -242,16 +248,24 @@ CONFIG_SAMSUNG_GPIOLIB_4BIT=y CONFIG_S3C_GPIO_CFG_S3C24XX=y CONFIG_S3C_GPIO_CFG_S3C64XX=y CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S5P_GPIO_DRVSTR=y CONFIG_SAMSUNG_GPIO_EXTRA=0 CONFIG_S3C_GPIO_SPACE=0 CONFIG_S3C_GPIO_TRACK=y # CONFIG_S3C_ADC is not set +CONFIG_S3C_DEV_WDT=y +CONFIG_SAMSUNG_DEV_ADC=y +CONFIG_SAMSUNG_DEV_TS=y +CONFIG_S3C_PL330_DMA=y # # Power management # CONFIG_PLAT_S5P=y +CONFIG_S5P_EXT_INT=y CONFIG_CPU_S5PV210=y +# CONFIG_MACH_AQUILA is not set +# CONFIG_MACH_GONI is not set CONFIG_MACH_SMDKV210=y # CONFIG_MACH_SMDKC110 is not set @@ -281,12 +295,14 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_BPREDICT_DISABLE is not set CONFIG_HAS_TLS_REG=y CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_DMA_MEM_BUFFERABLE=y CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_430973 is not set # CONFIG_ARM_ERRATA_458693 is not set # CONFIG_ARM_ERRATA_460075 is not set CONFIG_ARM_VIC=y CONFIG_ARM_VIC_NR=2 +CONFIG_PL330=y # # Bus support @@ -335,6 +351,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0 CONFIG_ZBOOT_ROM_BSS=0 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" +# CONFIG_CMDLINE_FORCE is not set # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -481,7 +498,9 @@ CONFIG_INPUT_EVDEV=y CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_AD7879 is not set # CONFIG_TOUCHSCREEN_DYNAPRO is not set +# CONFIG_TOUCHSCREEN_HAMPSHIRE is not set # CONFIG_TOUCHSCREEN_FUJITSU is not set +# CONFIG_TOUCHSCREEN_S3C2410 is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set @@ -536,6 +555,8 @@ CONFIG_SERIAL_S5PV210=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_TIMBERDALE is not set +# CONFIG_SERIAL_ALTERA_JTAGUART is not set +# CONFIG_SERIAL_ALTERA_UART is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -583,6 +604,7 @@ CONFIG_GPIOLIB=y # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set +CONFIG_HAVE_S3C2410_WATCHDOG=y CONFIG_SSB_POSSIBLE=y # @@ -635,10 +657,6 @@ CONFIG_RTC_LIB=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set - -# -# TI VLYNQ -# # CONFIG_STAGING is not set # @@ -847,6 +865,8 @@ CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_TRACING_SUPPORT=y CONFIG_FTRACE=y # CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_ENABLE_DEFAULT_TRACERS is not set # CONFIG_BOOT_TRACER is not set @@ -857,6 +877,7 @@ CONFIG_BRANCH_PROFILE_NONE=y # CONFIG_KMEMTRACE is not set # CONFIG_WORKQUEUE_TRACER is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_ATOMIC64_SELFTEST is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index bcda59f3994..2f87870d934 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -3,9 +3,6 @@ #include <asm/memory.h> #include <asm/types.h> - #include <asm-generic/scatterlist.h> -#undef ARCH_HAS_SG_CHAIN - #endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index abd04932917..2ec3095ffb7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -17,6 +17,7 @@ #include <linux/i2c.h> #include <linux/i2c/at24.h> #include <linux/i2c/pca953x.h> +#include <linux/mfd/tps6507x.h> #include <linux/gpio.h> #include <linux/platform_device.h> #include <linux/mtd/mtd.h> @@ -24,6 +25,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/regulator/machine.h> +#include <linux/mfd/tps6507x.h> +#include <linux/input/tps6507x-ts.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -533,10 +536,24 @@ struct regulator_init_data tps65070_regulator_data[] = { }, }; +static struct touchscreen_init_data tps6507x_touchscreen_data = { + .poll_period = 30, /* ms between touch samples */ + .min_pressure = 0x30, /* minimum pressure to trigger touch */ + .vref = 0, /* turn off vref when not using A/D */ + .vendor = 0, /* /sys/class/input/input?/id/vendor */ + .product = 65070, /* /sys/class/input/input?/id/product */ + .version = 0x100, /* /sys/class/input/input?/id/version */ +}; + +static struct tps6507x_board tps_board = { + .tps6507x_pmic_init_data = &tps65070_regulator_data[0], + .tps6507x_ts_init_data = &tps6507x_touchscreen_data, +}; + static struct i2c_board_info __initdata da850evm_tps65070_info[] = { { I2C_BOARD_INFO("tps6507x", 0x48), - .platform_data = &tps65070_regulator_data[0], + .platform_data = &tps_board, }, }; diff --git a/arch/arm/mach-davinci/include/mach/mmc.h b/arch/arm/mach-davinci/include/mach/mmc.h index 5a85e24f367..d4f1e967506 100644 --- a/arch/arm/mach-davinci/include/mach/mmc.h +++ b/arch/arm/mach-davinci/include/mach/mmc.h @@ -22,6 +22,9 @@ struct davinci_mmc_config { /* Version of the MMC/SD controller */ u8 version; + + /* Number of sg segments */ + u8 nr_sg; }; void davinci_setup_mmc(int module, struct davinci_mmc_config *config); diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index 33a8d35498a..62b5e40165d 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -220,11 +220,54 @@ static struct mc13783_regulator_init_data moboard_regulators[] = { }, }; +static struct mc13783_led_platform_data moboard_led[] = { + { + .id = MC13783_LED_R1, + .name = "coreboard-led-4:red", + .max_current = 2, + }, + { + .id = MC13783_LED_G1, + .name = "coreboard-led-4:green", + .max_current = 2, + }, + { + .id = MC13783_LED_B1, + .name = "coreboard-led-4:blue", + .max_current = 2, + }, + { + .id = MC13783_LED_R2, + .name = "coreboard-led-5:red", + .max_current = 3, + }, + { + .id = MC13783_LED_G2, + .name = "coreboard-led-5:green", + .max_current = 3, + }, + { + .id = MC13783_LED_B2, + .name = "coreboard-led-5:blue", + .max_current = 3, + }, +}; + +static struct mc13783_leds_platform_data moboard_leds = { + .num_leds = ARRAY_SIZE(moboard_led), + .led = moboard_led, + .flags = MC13783_LED_SLEWLIMTC, + .abmode = MC13783_LED_AB_DISABLED, + .tc1_period = MC13783_LED_PERIOD_10MS, + .tc2_period = MC13783_LED_PERIOD_10MS, +}; + static struct mc13783_platform_data moboard_pmic = { .regulators = moboard_regulators, .num_regulators = ARRAY_SIZE(moboard_regulators), + .leds = &moboard_leds, .flags = MC13783_USE_REGULATOR | MC13783_USE_RTC | - MC13783_USE_ADC, + MC13783_USE_ADC | MC13783_USE_LED, }; static struct spi_board_info moboard_spi_board_info[] __initdata = { diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index e7d629b3c76..f474a80b886 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -137,9 +137,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 5fcb52e7129..fefd7e6e977 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -209,8 +209,7 @@ static void ads7846_dev_init(void) } gpio_direction_input(ts_gpio); - omap_set_gpio_debounce(ts_gpio, 1); - omap_set_gpio_debounce_time(ts_gpio, 0xa); + gpio_set_debounce(ts_gpio, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 81bba194b03..b9526101381 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -579,9 +579,7 @@ static void ads7846_dev_init(void) printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); gpio_direction_input(OMAP3_EVM_TS_GPIO); - - omap_set_gpio_debounce(OMAP3_EVM_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_EVM_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); } static int ads7846_get_pendown_state(void) diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 395d049bf01..db06dc910ba 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -130,8 +130,8 @@ static struct platform_device pandora_keys_gpio = { static void __init pandora_keys_gpio_init(void) { /* set debounce time for GPIO banks 4 and 6 */ - omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); - omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 3, GPIO_DEBOUNCE_TIME); + gpio_set_debounce(32 * 5, GPIO_DEBOUNCE_TIME); } static int board_keymap[] = { diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 2504d41f923..2f5f8233dd5 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -328,8 +328,7 @@ static void __init omap3_ads7846_init(void) } gpio_direction_input(OMAP3_TS_GPIO); - omap_set_gpio_debounce(OMAP3_TS_GPIO, 1); - omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa); + gpio_set_debounce(OMAP3_TS_GPIO, 310); } static struct ads7846_platform_data ads7846_config = { diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 685f34a9634..fe0de1698ed 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -240,22 +240,23 @@ error_fail: #define ORION_BLINK_HALF_PERIOD 100 /* ms */ -static int dns323_gpio_blink_set(unsigned gpio, +static int dns323_gpio_blink_set(unsigned gpio, int state, unsigned long *delay_on, unsigned long *delay_off) { - static int value = 0; - if (!*delay_on && !*delay_off) + if (delay_on && delay_off && !*delay_on && !*delay_off) *delay_on = *delay_off = ORION_BLINK_HALF_PERIOD; - if (ORION_BLINK_HALF_PERIOD == *delay_on - && ORION_BLINK_HALF_PERIOD == *delay_off) { - value = !value; - orion_gpio_set_blink(gpio, value); - return 0; + switch(state) { + case GPIO_LED_NO_BLINK_LOW: + case GPIO_LED_NO_BLINK_HIGH: + orion_gpio_set_blink(gpio, 0); + gpio_set_value(gpio, state); + break; + case GPIO_LED_BLINK: + orion_gpio_set_blink(gpio, 1); } - - return -EINVAL; + return 0; } static struct gpio_led dns323_leds[] = { @@ -263,6 +264,7 @@ static struct gpio_led dns323_leds[] = { .name = "power:blue", .gpio = DNS323_GPIO_LED_POWER2, .default_trigger = "timer", + .active_low = 1, }, { .name = "right:amber", .gpio = DNS323_GPIO_LED_RIGHT_AMBER, diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index 033b567e50b..ce1104d1bc1 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -263,11 +263,11 @@ const struct matrix_keymap_data palmtc_keymap_data = { .keymap_size = ARRAY_SIZE(palmtc_matrix_keys), }; -const static unsigned int palmtc_keypad_row_gpios[] = { +static const unsigned int palmtc_keypad_row_gpios[] = { 0, 9, 10, 11 }; -const static unsigned int palmtc_keypad_col_gpios[] = { +static const unsigned int palmtc_keypad_col_gpios[] = { 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 79, 80 }; diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 4d2413ed0ff..c1048a35f18 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -818,6 +818,9 @@ static struct i2c_board_info akita_i2c_board_info[] = { .type = "max7310", .addr = 0x18, .platform_data = &akita_ioexp, + }, { + .type = "wm8750", + .addr = 0x1b, }, }; diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 45799c608d8..9e39faa283b 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -49,7 +49,6 @@ #include <linux/io.h> #include <linux/i2c.h> -#include <linux/backlight.h> #include <linux/regulator/machine.h> #include <linux/mfd/pcf50633/core.h> @@ -57,6 +56,7 @@ #include <linux/mfd/pcf50633/adc.h> #include <linux/mfd/pcf50633/gpio.h> #include <linux/mfd/pcf50633/pmic.h> +#include <linux/mfd/pcf50633/backlight.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -254,6 +254,12 @@ static char *gta02_batteries[] = { "battery", }; +static struct pcf50633_bl_platform_data gta02_backlight_data = { + .default_brightness = 0x3f, + .default_brightness_limit = 0, + .ramp_time = 5, +}; + struct pcf50633_platform_data gta02_pcf_pdata = { .resumers = { [0] = PCF50633_INT1_USBINS | @@ -271,6 +277,8 @@ struct pcf50633_platform_data gta02_pcf_pdata = { .charger_reference_current_ma = 1000, + .backlight_data = >a02_backlight_data, + .reg_init_data = { [PCF50633_REGULATOR_AUTO] = { .constraints = { @@ -478,71 +486,6 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = { }; - - -static void gta02_bl_set_intensity(int intensity) -{ - struct pcf50633 *pcf = gta02_pcf; - int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); - - /* We map 8-bit intensity to 6-bit intensity in hardware. */ - intensity >>= 2; - - /* - * This can happen during, eg, print of panic on blanked console, - * but we can't service i2c without interrupts active, so abort. - */ - if (in_atomic()) { - printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n"); - return; - } - - old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT); - if (intensity == old_intensity) - return; - - /* We can't do this anywhere else. */ - pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5); - - if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3)) - old_intensity = 0; - - /* - * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60) - * if seen, you have to re-enable the LED unit. - */ - if (!intensity || !old_intensity) - pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0); - - /* Illegal to set LEDOUT to 0. */ - if (!intensity) - pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2); - else - pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, - intensity); - - if (intensity) - pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2); - -} - -static struct generic_bl_info gta02_bl_info = { - .name = "gta02-bl", - .max_intensity = 0xff, - .default_intensity = 0xff, - .set_bl_intensity = gta02_bl_set_intensity, -}; - -static struct platform_device gta02_bl_dev = { - .name = "generic-bl", - .id = 1, - .dev = { - .platform_data = >a02_bl_info, - }, -}; - - - /* USB */ static struct s3c2410_hcd_info gta02_usb_info __initdata = { .port[0] = { @@ -579,7 +522,6 @@ static struct platform_device *gta02_devices[] __initdata = { /* These guys DO need to be children of PMU. */ static struct platform_device *gta02_devices_pmu_children[] = { - >a02_bl_dev, }; diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 7a4138beb66..fbd85a9b7bb 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -259,6 +259,12 @@ static struct clk init_clocks[] = { .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, }, { + .name = "otg", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_USB, + }, { .name = "timers", .id = -1, .parent = &clk_p, diff --git a/arch/arm/mach-s5p6440/include/mach/irqs.h b/arch/arm/mach-s5p6440/include/mach/irqs.h index a4b9b40d18f..911854d9ad4 100644 --- a/arch/arm/mach-s5p6440/include/mach/irqs.h +++ b/arch/arm/mach-s5p6440/include/mach/irqs.h @@ -72,7 +72,14 @@ #define S5P_IRQ_EINT_BASE (S5P_IRQ_VIC1(31) + 6) #define S5P_EINT(x) ((x) + S5P_IRQ_EINT_BASE) -#define IRQ_EINT(x) S5P_EINT(x) + +#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE) +/* + * S5P6440 has 0-15 external interrupts in group 0. Only these can be used + * to wake up from sleep. If request is beyond this range, by mistake, a large + * return value for an irq number should be indication of something amiss. + */ +#define S5P_EINT_BASE2 (0xf0000000) /* * Next the external interrupt groups. These are similar to the IRQ_EINT(x) diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h index da665809f6e..02c23749c02 100644 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ b/arch/arm/mach-s5p6442/include/mach/irqs.h @@ -77,8 +77,9 @@ #define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_IRQ_EINT_BASE + (x)-16)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) + /* Set the default NR_IRQS */ #define NR_IRQS (IRQ_EINT(31) + 1) diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h index 15066df3ced..28aa551dc3a 100644 --- a/arch/arm/mach-s5pc100/include/mach/irqs.h +++ b/arch/arm/mach-s5pc100/include/mach/irqs.h @@ -100,9 +100,6 @@ #define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) #define S5P_EINT_BASE2 (IRQ_VIC_END + 1) -#define IRQ_EINT(x) ((x) < 16 ? S5P_IRQ_VIC0(x) : \ - (S5P_EINT_BASE2 + (x) - 16)) - #define S3C_IRQ_GPIO_BASE (IRQ_EINT(31) + 1) #define S3C_IRQ_GPIO(x) (S3C_IRQ_GPIO_BASE + (x)) diff --git a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h index 763edebdd57..dd6295e1251 100644 --- a/arch/arm/mach-s5pc100/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pc100/include/mach/regs-gpio.h @@ -60,12 +60,9 @@ #define S5PC100EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PC100EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) : \ - (((irq) - S5P_EINT_BASE2))) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index 92fc6c7fc06..96895378ea2 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -118,22 +118,12 @@ #define IRQ_MDNIE3 S5P_IRQ_VIC3(8) #define IRQ_VIC_END S5P_IRQ_VIC3(31) -#define S5P_EINT_16_31_BASE (IRQ_VIC_END + 1) - -#define EINT_MODE S3C_GPIO_SFN(0xf) - -#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_IRQ_VIC0(0)) \ - : ((x) + S5P_EINT_16_31_BASE)) +#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) +#define S5P_EINT_BASE2 (IRQ_VIC_END + 1) /* Set the default NR_IRQS */ - #define NR_IRQS (IRQ_EINT(31) + 1) -#define EINT_GPIO_0(x) S5PV210_GPH0(x) -#define EINT_GPIO_1(x) S5PV210_GPH1(x) -#define EINT_GPIO_2(x) S5PV210_GPH2(x) -#define EINT_GPIO_3(x) S5PV210_GPH3(x) - /* Compatibility */ #define IRQ_LCD_FIFO IRQ_LCD0 #define IRQ_LCD_VSYNC IRQ_LCD1 diff --git a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h index 6d068091c36..49e029b4978 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-gpio.h @@ -27,12 +27,9 @@ #define S5PV210_EINT30PEND (S5P_VA_GPIO + 0xF40) #define S5P_EINT_PEND(x) (S5PV210_EINT30PEND + ((x) * 0x4)) -#define eint_offset(irq) ((irq) < IRQ_EINT16_31 ? ((irq) - IRQ_EINT(0)) \ - : ((irq) - S5P_EINT_16_31_BASE)) +#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3) -#define EINT_REG_NR(x) (eint_offset(x) >> 3) - -#define eint_irq_to_bit(irq) (1 << (eint_offset(irq) & 0x7)) +#define eint_irq_to_bit(irq) (1 << (EINT_OFFSET(irq) & 0x7)) /* values for S5P_EXTINT0 */ #define S5P_EXTINT_LOWLEV (0x00) @@ -41,4 +38,11 @@ #define S5P_EXTINT_RISEEDGE (0x03) #define S5P_EXTINT_BOTHEDGE (0x04) +#define EINT_MODE S3C_GPIO_SFN(0xf) + +#define EINT_GPIO_0(x) S5PV210_GPH0(x) +#define EINT_GPIO_1(x) S5PV210_GPH1(x) +#define EINT_GPIO_2(x) S5PV210_GPH2(x) +#define EINT_GPIO_3(x) S5PV210_GPH3(x) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c index c73ed06b606..f0394baa11f 100644 --- a/arch/arm/mach-u300/i2c.c +++ b/arch/arm/mach-u300/i2c.c @@ -9,7 +9,7 @@ */ #include <linux/kernel.h> #include <linux/i2c.h> -#include <linux/mfd/ab3100.h> +#include <linux/mfd/abx500.h> #include <linux/regulator/machine.h> #include <linux/amba/bus.h> #include <mach/irqs.h> @@ -46,6 +46,7 @@ /* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */ #define BUCK_SLEEP_SETTING 0xAC +#ifdef CONFIG_AB3100_CORE static struct regulator_consumer_supply supply_ldo_c[] = { { .dev_name = "ab3100-codec", @@ -253,14 +254,68 @@ static struct ab3100_platform_data ab3100_plf_data = { LDO_D_SETTING, }, }; +#endif + +#ifdef CONFIG_AB3550_CORE +static struct abx500_init_settings ab3550_init_settings[] = { + { + .bank = 0, + .reg = AB3550_IMR1, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR2, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR3, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR4, + .setting = 0xff + }, + { + .bank = 0, + .reg = AB3550_IMR5, + /* The two most significant bits are not used */ + .setting = 0x3f + }, +}; + +static struct ab3550_platform_data ab3550_plf_data = { + .irq = { + .base = IRQ_AB3550_BASE, + .count = (IRQ_AB3550_END - IRQ_AB3550_BASE + 1), + }, + .dev_data = { + }, + .init_settings = ab3550_init_settings, + .init_settings_sz = ARRAY_SIZE(ab3550_init_settings), +}; +#endif static struct i2c_board_info __initdata bus0_i2c_board_info[] = { +#if defined(CONFIG_AB3550_CORE) + { + .type = "ab3550", + .addr = 0x4A, + .irq = IRQ_U300_IRQ0_EXT, + .platform_data = &ab3550_plf_data, + }, +#elif defined(CONFIG_AB3100_CORE) { .type = "ab3100", .addr = 0x48, .irq = IRQ_U300_IRQ0_EXT, .platform_data = &ab3100_plf_data, }, +#else + { }, +#endif }; static struct i2c_board_info __initdata bus1_i2c_board_info[] = { diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h index a6867b12773..09b1b28fa8f 100644 --- a/arch/arm/mach-u300/include/mach/irqs.h +++ b/arch/arm/mach-u300/include/mach/irqs.h @@ -109,6 +109,13 @@ #define U300_NR_IRQS 48 #endif +#ifdef CONFIG_AB3550_CORE +#define IRQ_AB3550_BASE (U300_NR_IRQS) +#define IRQ_AB3550_END (IRQ_AB3550_BASE + 37) + +#define NR_IRQS (IRQ_AB3550_END + 1) +#else #define NR_IRQS U300_NR_IRQS +#endif #endif diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 072196c5726..bb8d7b77181 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -50,7 +50,7 @@ struct pl022_config_chip ab4500_chip_info = { static struct spi_board_info u8500_spi_devices[] = { { - .modalias = "ab4500", + .modalias = "ab8500", .controller_data = &ab4500_chip_info, .max_speed_hz = 12000000, .bus_num = 0, diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index b5fc2e21961..fe84b9021c7 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -502,7 +502,7 @@ static struct clk_lookup u8500_common_clks[] = { CLK(apetraceclk, "apetrace", NULL), CLK(mcdeclk, "mcde", NULL), CLK(ipi2clk, "ipi2", NULL), - CLK(dmaclk, "dma40", NULL), + CLK(dmaclk, "dma40.0", NULL), CLK(b2r2clk, "b2r2", NULL), CLK(tvclk, "tv", NULL), }; diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index d04299f3b6b..f21c444edd9 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -32,6 +32,7 @@ static struct platform_device *platform_devs[] __initdata = { &u8500_gpio_devs[6], &u8500_gpio_devs[7], &u8500_gpio_devs[8], + &u8500_dma40_device, }; /* minimum static i/o mapping required to boot U8500 platforms */ @@ -71,6 +72,9 @@ void __init u8500_init_devices(void) { ux500_init_devices(); + if (cpu_is_u8500ed()) + dma40_u8500ed_fixup(); + /* Register the platform devices */ platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c index 20334236afc..82290342194 100644 --- a/arch/arm/mach-ux500/devices-db8500.c +++ b/arch/arm/mach-ux500/devices-db8500.c @@ -12,9 +12,13 @@ #include <linux/gpio.h> #include <linux/amba/bus.h> +#include <plat/ste_dma40.h> + #include <mach/hardware.h> #include <mach/setup.h> +#include "ste-dma40-db8500.h" + static struct nmk_gpio_platform_data u8500_gpio_data[] = { GPIO_DATA("GPIO-0-31", 0), GPIO_DATA("GPIO-32-63", 32), /* 37..63 not routed to pin */ @@ -105,3 +109,108 @@ struct platform_device u8500_i2c4_device = { .resource = u8500_i2c4_resources, .num_resources = ARRAY_SIZE(u8500_i2c4_resources), }; + +static struct resource dma40_resources[] = { + [0] = { + .start = U8500_DMA_BASE, + .end = U8500_DMA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "base", + }, + [1] = { + .start = U8500_DMA_LCPA_BASE, + .end = U8500_DMA_LCPA_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + .name = "lcpa", + }, + [2] = { + .start = U8500_DMA_LCLA_BASE, + .end = U8500_DMA_LCLA_BASE + 16 * 1024 - 1, + .flags = IORESOURCE_MEM, + .name = "lcla", + }, + [3] = { + .start = IRQ_DMA, + .end = IRQ_DMA, + .flags = IORESOURCE_IRQ} +}; + +/* Default configuration for physcial memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_phy = { + .channel_type = (STEDMA40_CHANNEL_IN_PHY_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_PCHAN_BASIC_MODE), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_PHY_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_PHY_1, + +}; +/* Default configuration for logical memcpy */ +struct stedma40_chan_cfg dma40_memcpy_conf_log = { + .channel_type = (STEDMA40_CHANNEL_IN_LOG_MODE | + STEDMA40_LOW_PRIORITY_CHANNEL | + STEDMA40_LCHAN_SRC_LOG_DST_LOG | + STEDMA40_NO_TIM_FOR_LINK), + .dir = STEDMA40_MEM_TO_MEM, + + .src_info.endianess = STEDMA40_LITTLE_ENDIAN, + .src_info.data_width = STEDMA40_BYTE_WIDTH, + .src_info.psize = STEDMA40_PSIZE_LOG_1, + + .dst_info.endianess = STEDMA40_LITTLE_ENDIAN, + .dst_info.data_width = STEDMA40_BYTE_WIDTH, + .dst_info.psize = STEDMA40_PSIZE_LOG_1, + +}; + +/* + * Mapping between destination event lines and physical device address. + * The event line is tied to a device and therefor the address is constant. + */ +static const dma_addr_t dma40_tx_map[STEDMA40_NR_DEV]; + +/* Mapping between source event lines and physical device address */ +static const dma_addr_t dma40_rx_map[STEDMA40_NR_DEV]; + +/* Reserved event lines for memcpy only */ +static int dma40_memcpy_event[] = { + STEDMA40_MEMCPY_TX_1, + STEDMA40_MEMCPY_TX_2, + STEDMA40_MEMCPY_TX_3, + STEDMA40_MEMCPY_TX_4, +}; + +static struct stedma40_platform_data dma40_plat_data = { + .dev_len = STEDMA40_NR_DEV, + .dev_rx = dma40_rx_map, + .dev_tx = dma40_tx_map, + .memcpy = dma40_memcpy_event, + .memcpy_len = ARRAY_SIZE(dma40_memcpy_event), + .memcpy_conf_phy = &dma40_memcpy_conf_phy, + .memcpy_conf_log = &dma40_memcpy_conf_log, + .llis_per_log = 8, +}; + +struct platform_device u8500_dma40_device = { + .dev = { + .platform_data = &dma40_plat_data, + }, + .name = "dma40", + .id = 0, + .num_resources = ARRAY_SIZE(dma40_resources), + .resource = dma40_resources +}; + +void dma40_u8500ed_fixup(void) +{ + dma40_plat_data.memcpy = NULL; + dma40_plat_data.memcpy_len = 0; + dma40_resources[0].start = U8500_DMA_BASE_ED; + dma40_resources[0].end = U8500_DMA_BASE_ED + SZ_4K - 1; +} diff --git a/arch/arm/mach-ux500/include/mach/db8500-regs.h b/arch/arm/mach-ux500/include/mach/db8500-regs.h index 9169e1e382a..85fc6a80b38 100644 --- a/arch/arm/mach-ux500/include/mach/db8500-regs.h +++ b/arch/arm/mach-ux500/include/mach/db8500-regs.h @@ -7,6 +7,18 @@ #ifndef __MACH_DB8500_REGS_H #define __MACH_DB8500_REGS_H +/* Base address and bank offsets for ESRAM */ +#define U8500_ESRAM_BASE 0x40000000 +#define U8500_ESRAM_BANK_SIZE 0x00020000 +#define U8500_ESRAM_BANK0 U8500_ESRAM_BASE +#define U8500_ESRAM_BANK1 (U8500_ESRAM_BASE + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK2 (U8500_ESRAM_BANK1 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK3 (U8500_ESRAM_BANK2 + U8500_ESRAM_BANK_SIZE) +#define U8500_ESRAM_BANK4 (U8500_ESRAM_BANK3 + U8500_ESRAM_BANK_SIZE) +/* Use bank 4 for DMA LCLA and LCPA */ +#define U8500_DMA_LCLA_BASE U8500_ESRAM_BANK4 +#define U8500_DMA_LCPA_BASE (U8500_ESRAM_BANK4 + 0x4000) + #define U8500_PER3_BASE 0x80000000 #define U8500_STM_BASE 0x80100000 #define U8500_STM_REG_BASE (U8500_STM_BASE + 0xF000) diff --git a/arch/arm/mach-ux500/include/mach/devices.h b/arch/arm/mach-ux500/include/mach/devices.h index 0422af00a56..c2b2f257494 100644 --- a/arch/arm/mach-ux500/include/mach/devices.h +++ b/arch/arm/mach-ux500/include/mach/devices.h @@ -25,5 +25,8 @@ extern struct platform_device ux500_i2c3_device; extern struct platform_device u8500_i2c0_device; extern struct platform_device u8500_i2c4_device; +extern struct platform_device u8500_dma40_device; + +void dma40_u8500ed_fixup(void); #endif diff --git a/arch/arm/mach-ux500/ste-dma40-db8500.h b/arch/arm/mach-ux500/ste-dma40-db8500.h new file mode 100644 index 00000000000..e7016278dfa --- /dev/null +++ b/arch/arm/mach-ux500/ste-dma40-db8500.h @@ -0,0 +1,154 @@ +/* + * arch/arm/mach-ux500/ste_dma40_db8500.h + * DB8500-SoC-specific configuration for DMA40 + * + * Copyright (C) ST-Ericsson 2007-2010 + * License terms: GNU General Public License (GPL) version 2 + * Author: Per Friden <per.friden@stericsson.com> + * Author: Jonas Aaberg <jonas.aberg@stericsson.com> + */ +#ifndef STE_DMA40_DB8500_H +#define STE_DMA40_DB8500_H + +#define STEDMA40_NR_DEV 64 + +enum dma_src_dev_type { + STEDMA40_DEV_SPI0_RX = 0, + STEDMA40_DEV_SD_MMC0_RX = 1, + STEDMA40_DEV_SD_MMC1_RX = 2, + STEDMA40_DEV_SD_MMC2_RX = 3, + STEDMA40_DEV_I2C1_RX = 4, + STEDMA40_DEV_I2C3_RX = 5, + STEDMA40_DEV_I2C2_RX = 6, + STEDMA40_DEV_I2C4_RX = 7, /* Only on V1 */ + STEDMA40_DEV_SSP0_RX = 8, + STEDMA40_DEV_SSP1_RX = 9, + STEDMA40_DEV_MCDE_RX = 10, + STEDMA40_DEV_UART2_RX = 11, + STEDMA40_DEV_UART1_RX = 12, + STEDMA40_DEV_UART0_RX = 13, + STEDMA40_DEV_MSP2_RX = 14, + STEDMA40_DEV_I2C0_RX = 15, + STEDMA40_DEV_USB_OTG_IEP_8 = 16, + STEDMA40_DEV_USB_OTG_IEP_1_9 = 17, + STEDMA40_DEV_USB_OTG_IEP_2_10 = 18, + STEDMA40_DEV_USB_OTG_IEP_3_11 = 19, + STEDMA40_DEV_SLIM0_CH0_RX_HSI_RX_CH0 = 20, + STEDMA40_DEV_SLIM0_CH1_RX_HSI_RX_CH1 = 21, + STEDMA40_DEV_SLIM0_CH2_RX_HSI_RX_CH2 = 22, + STEDMA40_DEV_SLIM0_CH3_RX_HSI_RX_CH3 = 23, + STEDMA40_DEV_SRC_SXA0_RX_TX = 24, + STEDMA40_DEV_SRC_SXA1_RX_TX = 25, + STEDMA40_DEV_SRC_SXA2_RX_TX = 26, + STEDMA40_DEV_SRC_SXA3_RX_TX = 27, + STEDMA40_DEV_SD_MM2_RX = 28, + STEDMA40_DEV_SD_MM0_RX = 29, + STEDMA40_DEV_MSP1_RX = 30, + /* + * This channel is either SlimBus or MSP, + * never both at the same time. + */ + STEDMA40_SLIM0_CH0_RX = 31, + STEDMA40_DEV_MSP0_RX = 31, + STEDMA40_DEV_SD_MM1_RX = 32, + STEDMA40_DEV_SPI2_RX = 33, + STEDMA40_DEV_I2C3_RX2 = 34, + STEDMA40_DEV_SPI1_RX = 35, + STEDMA40_DEV_USB_OTG_IEP_4_12 = 36, + STEDMA40_DEV_USB_OTG_IEP_5_13 = 37, + STEDMA40_DEV_USB_OTG_IEP_6_14 = 38, + STEDMA40_DEV_USB_OTG_IEP_7_15 = 39, + STEDMA40_DEV_SPI3_RX = 40, + STEDMA40_DEV_SD_MM3_RX = 41, + STEDMA40_DEV_SD_MM4_RX = 42, + STEDMA40_DEV_SD_MM5_RX = 43, + STEDMA40_DEV_SRC_SXA4_RX_TX = 44, + STEDMA40_DEV_SRC_SXA5_RX_TX = 45, + STEDMA40_DEV_SRC_SXA6_RX_TX = 46, + STEDMA40_DEV_SRC_SXA7_RX_TX = 47, + STEDMA40_DEV_CAC1_RX = 48, + /* RX channels 49 and 50 are unused */ + STEDMA40_DEV_MSHC_RX = 51, + STEDMA40_DEV_SLIM1_CH0_RX_HSI_RX_CH4 = 52, + STEDMA40_DEV_SLIM1_CH1_RX_HSI_RX_CH5 = 53, + STEDMA40_DEV_SLIM1_CH2_RX_HSI_RX_CH6 = 54, + STEDMA40_DEV_SLIM1_CH3_RX_HSI_RX_CH7 = 55, + /* RX channels 56 thru 60 are unused */ + STEDMA40_DEV_CAC0_RX = 61, + /* RX channels 62 and 63 are unused */ +}; + +enum dma_dest_dev_type { + STEDMA40_DEV_SPI0_TX = 0, + STEDMA40_DEV_SD_MMC0_TX = 1, + STEDMA40_DEV_SD_MMC1_TX = 2, + STEDMA40_DEV_SD_MMC2_TX = 3, + STEDMA40_DEV_I2C1_TX = 4, + STEDMA40_DEV_I2C3_TX = 5, + STEDMA40_DEV_I2C2_TX = 6, + STEDMA50_DEV_I2C4_TX = 7, /* Only on V1 */ + STEDMA40_DEV_SSP0_TX = 8, + STEDMA40_DEV_SSP1_TX = 9, + /* TX channel 10 is unused */ + STEDMA40_DEV_UART2_TX = 11, + STEDMA40_DEV_UART1_TX = 12, + STEDMA40_DEV_UART0_TX= 13, + STEDMA40_DEV_MSP2_TX = 14, + STEDMA40_DEV_I2C0_TX = 15, + STEDMA40_DEV_USB_OTG_OEP_8 = 16, + STEDMA40_DEV_USB_OTG_OEP_1_9 = 17, + STEDMA40_DEV_USB_OTG_OEP_2_10= 18, + STEDMA40_DEV_USB_OTG_OEP_3_11 = 19, + STEDMA40_DEV_SLIM0_CH0_TX_HSI_TX_CH0 = 20, + STEDMA40_DEV_SLIM0_CH1_TX_HSI_TX_CH1 = 21, + STEDMA40_DEV_SLIM0_CH2_TX_HSI_TX_CH2 = 22, + STEDMA40_DEV_SLIM0_CH3_TX_HSI_TX_CH3 = 23, + STEDMA40_DEV_DST_SXA0_RX_TX = 24, + STEDMA40_DEV_DST_SXA1_RX_TX = 25, + STEDMA40_DEV_DST_SXA2_RX_TX = 26, + STEDMA40_DEV_DST_SXA3_RX_TX = 27, + STEDMA40_DEV_SD_MM2_TX = 28, + STEDMA40_DEV_SD_MM0_TX = 29, + STEDMA40_DEV_MSP1_TX = 30, + /* + * This channel is either SlimBus or MSP, + * never both at the same time. + */ + STEDMA40_SLIM0_CH0_TX = 31, + STEDMA40_DEV_MSP0_TX = 31, + STEDMA40_DEV_SD_MM1_TX = 32, + STEDMA40_DEV_SPI2_TX = 33, + /* Secondary I2C3 channel */ + STEDMA40_DEV_I2C3_TX2 = 34, + STEDMA40_DEV_SPI1_TX = 35, + STEDMA40_DEV_USB_OTG_OEP_4_12 = 36, + STEDMA40_DEV_USB_OTG_OEP_5_13 = 37, + STEDMA40_DEV_USB_OTG_OEP_6_14 = 38, + STEDMA40_DEV_USB_OTG_OEP_7_15 = 39, + STEDMA40_DEV_SPI3_TX = 40, + STEDMA40_DEV_SD_MM3_TX = 41, + STEDMA40_DEV_SD_MM4_TX = 42, + STEDMA40_DEV_SD_MM5_TX = 43, + STEDMA40_DEV_DST_SXA4_RX_TX = 44, + STEDMA40_DEV_DST_SXA5_RX_TX = 45, + STEDMA40_DEV_DST_SXA6_RX_TX = 46, + STEDMA40_DEV_DST_SXA7_RX_TX = 47, + STEDMA40_DEV_CAC1_TX = 48, + STEDMA40_DEV_CAC1_TX_HAC1_TX = 49, + STEDMA40_DEV_HAC1_TX = 50, + STEDMA40_MEMXCPY_TX_0 = 51, + STEDMA40_DEV_SLIM1_CH0_TX_HSI_TX_CH4 = 52, + STEDMA40_DEV_SLIM1_CH1_TX_HSI_TX_CH5 = 53, + STEDMA40_DEV_SLIM1_CH2_TX_HSI_TX_CH6 = 54, + STEDMA40_DEV_SLIM1_CH3_TX_HSI_TX_CH7 = 55, + STEDMA40_MEMCPY_TX_1 = 56, + STEDMA40_MEMCPY_TX_2 = 57, + STEDMA40_MEMCPY_TX_3 = 58, + STEDMA40_MEMCPY_TX_4 = 59, + STEDMA40_MEMCPY_TX_5 = 60, + STEDMA40_DEV_CAC0_TX = 61, + STEDMA40_DEV_CAC0_TX_HAC0_TX = 62, + STEDMA40_DEV_HAC0_TX = 63, +}; + +#endif diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index dc2ac42d631..393e9219a5b 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -624,79 +624,58 @@ do { \ __raw_writel(l, base + reg); \ } while(0) -void omap_set_gpio_debounce(int gpio, int enable) +/** + * _set_gpio_debounce - low level gpio debounce time + * @bank: the gpio bank we're acting upon + * @gpio: the gpio number on this @gpio + * @debounce: debounce time to use + * + * OMAP's debounce time is in 31us steps so we need + * to convert and round up to the closest unit. + */ +static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, + unsigned debounce) { - struct gpio_bank *bank; - void __iomem *reg; - unsigned long flags; - u32 val, l = 1 << get_gpio_index(gpio); + void __iomem *reg = bank->base; + u32 val; + u32 l; + + if (debounce < 32) + debounce = 0x01; + else if (debounce > 7936) + debounce = 0xff; + else + debounce = (debounce / 0x1f) - 1; - if (cpu_class_is_omap1()) - return; + l = 1 << get_gpio_index(gpio); - bank = get_gpio_bank(gpio); - reg = bank->base; + if (cpu_is_omap44xx()) + reg += OMAP4_GPIO_DEBOUNCINGTIME; + else + reg += OMAP24XX_GPIO_DEBOUNCE_VAL; + + __raw_writel(debounce, reg); + reg = bank->base; if (cpu_is_omap44xx()) reg += OMAP4_GPIO_DEBOUNCENABLE; else reg += OMAP24XX_GPIO_DEBOUNCE_EN; - if (!(bank->mod_usage & l)) { - printk(KERN_ERR "GPIO %d not requested\n", gpio); - return; - } - - spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); - if (enable && !(val & l)) + if (debounce) { val |= l; - else if (!enable && (val & l)) - val &= ~l; - else - goto done; - - if (cpu_is_omap34xx() || cpu_is_omap44xx()) { - bank->dbck_enable_mask = val; - if (enable) + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_enable(bank->dbck); - else + } else { + val &= ~l; + if (cpu_is_omap34xx() || cpu_is_omap44xx()) clk_disable(bank->dbck); } __raw_writel(val, reg); -done: - spin_unlock_irqrestore(&bank->lock, flags); } -EXPORT_SYMBOL(omap_set_gpio_debounce); - -void omap_set_gpio_debounce_time(int gpio, int enc_time) -{ - struct gpio_bank *bank; - void __iomem *reg; - - if (cpu_class_is_omap1()) - return; - - bank = get_gpio_bank(gpio); - reg = bank->base; - - if (!bank->mod_usage) { - printk(KERN_ERR "GPIO not requested\n"); - return; - } - - enc_time &= 0xff; - - if (cpu_is_omap44xx()) - reg += OMAP4_GPIO_DEBOUNCINGTIME; - else - reg += OMAP24XX_GPIO_DEBOUNCE_VAL; - - __raw_writel(enc_time, reg); -} -EXPORT_SYMBOL(omap_set_gpio_debounce_time); #ifdef CONFIG_ARCH_OMAP2PLUS static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, @@ -1656,6 +1635,20 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value) return 0; } +static int gpio_debounce(struct gpio_chip *chip, unsigned offset, + unsigned debounce) +{ + struct gpio_bank *bank; + unsigned long flags; + + bank = container_of(chip, struct gpio_bank, chip); + spin_lock_irqsave(&bank->lock, flags); + _set_gpio_debounce(bank, offset, debounce); + spin_unlock_irqrestore(&bank->lock, flags); + + return 0; +} + static void gpio_set(struct gpio_chip *chip, unsigned offset, int value) { struct gpio_bank *bank; @@ -1909,6 +1902,7 @@ static int __init _omap_gpio_init(void) bank->chip.direction_input = gpio_input; bank->chip.get = gpio_get; bank->chip.direction_output = gpio_output; + bank->chip.set_debounce = gpio_debounce; bank->chip.set = gpio_set; bank->chip.to_irq = gpio_2irq; if (bank_is_mpuio(bank)) { diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 5cb2dd1da63..11d6a1bbd90 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -29,3 +29,4 @@ config S5P_EXT_INT bool help Use the external interrupts (other than GPIO interrupts.) + Note: Do not choose this for S5P6440. diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 24a931fd8d3..b5e255265f2 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -148,6 +148,7 @@ static struct clk *s5p_clks[] __initdata = { &clk_fout_vpll, &clk_arm, &clk_vpll, + &clk_xusbxti, }; void __init s5p_register_clocks(unsigned long xtal_freq) diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-s5p/include/plat/irqs.h index 9ff3d718be3..3fb3a3a1746 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-s5p/include/plat/irqs.h @@ -87,4 +87,11 @@ #define IRQ_TIMER3 S5P_TIMER_IRQ(3) #define IRQ_TIMER4 S5P_TIMER_IRQ(4) +#define IRQ_EINT(x) ((x) < 16 ? ((x) + S5P_EINT_BASE1) \ + : ((x) - 16 + S5P_EINT_BASE2)) + +#define EINT_OFFSET(irq) ((irq) < S5P_EINT_BASE2 ? \ + ((irq) - S5P_EINT_BASE1) : \ + ((irq) + 16 - S5P_EINT_BASE2)) + #endif /* __ASM_PLAT_S5P_IRQS_H */ diff --git a/arch/arm/plat-s5p/irq-eint.c b/arch/arm/plat-s5p/irq-eint.c index eaa70aa0127..e56c8075df9 100644 --- a/arch/arm/plat-s5p/irq-eint.c +++ b/arch/arm/plat-s5p/irq-eint.c @@ -60,7 +60,7 @@ static void s5p_irq_eint_maskack(unsigned int irq) static int s5p_irq_eint_set_type(unsigned int irq, unsigned int type) { - int offs = eint_offset(irq); + int offs = EINT_OFFSET(irq); int shift; u32 ctrl, mask; u32 newvalue = 0; @@ -139,17 +139,16 @@ static struct irq_chip s5p_irq_eint = { */ static inline void s5p_irq_demux_eint(unsigned int start) { - u32 status; + u32 status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); u32 mask = __raw_readl(S5P_EINT_MASK(EINT_REG_NR(start))); unsigned int irq; - status = __raw_readl(S5P_EINT_PEND(EINT_REG_NR(start))); status &= ~mask; status &= 0xff; while (status) { - irq = fls(status); - generic_handle_irq(irq - 1 + start); + irq = fls(status) - 1; + generic_handle_irq(irq + start); status &= ~(1 << irq); } } @@ -162,12 +161,18 @@ static void s5p_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) static inline void s5p_irq_vic_eint_mask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_mask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE_CLEAR); } static void s5p_irq_vic_eint_unmask(unsigned int irq) { + void __iomem *base = get_irq_chip_data(irq); + s5p_irq_eint_unmask(irq); + writel(1 << EINT_OFFSET(irq), base + VIC_INT_ENABLE); } static inline void s5p_irq_vic_eint_ack(unsigned int irq) diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 34efdd2b032..db4112c6f2b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -43,6 +43,11 @@ struct s3c_gpio_chip; * layouts. Provide an point to vector control routine and provide any * per-bank configuration information that other systems such as the * external interrupt code will need. + * + * @sa s3c_gpio_cfgpin + * @sa s3c_gpio_getcfg + * @sa s3c_gpio_setpull + * @sa s3c_gpio_getpull */ struct s3c_gpio_cfg { unsigned int cfg_eint; @@ -70,11 +75,25 @@ struct s3c_gpio_cfg { /** * s3c_gpio_cfgpin() - Change the GPIO function of a pin. * @pin pin The pin number to configure. - * @pin to The configuration for the pin's function. + * @to to The configuration for the pin's function. * * Configure which function is actually connected to the external * pin, such as an gpio input, output or some form of special function * connected to an internal peripheral block. + * + * The @to parameter can be one of the generic S3C_GPIO_INPUT, S3C_GPIO_OUTPUT + * or S3C_GPIO_SFN() to indicate one of the possible values that the helper + * will then generate the correct bit mask and shift for the configuration. + * + * If a bank of GPIOs all needs to be set to special-function 2, then + * the following code will work: + * + * for (gpio = start; gpio < end; gpio++) + * s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + * + * The @to parameter can also be a specific value already shifted to the + * correct position in the control register, although these are discouraged + * in newer kernels and are only being kept for compatibility. */ extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); @@ -108,6 +127,8 @@ extern unsigned s3c_gpio_getcfg(unsigned int pin); * This function sets the state of the pull-{up,down} resistor for the * specified pin. It will return 0 if successfull, or a negative error * code if the pin cannot support the requested pull setting. + * + * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); diff --git a/arch/avr32/include/asm/scatterlist.h b/arch/avr32/include/asm/scatterlist.h index 377320e3bd1..06394e5ead6 100644 --- a/arch/avr32/include/asm/scatterlist.h +++ b/arch/avr32/include/asm/scatterlist.h @@ -1,25 +1,7 @@ #ifndef __ASM_AVR32_SCATTERLIST_H #define __ASM_AVR32_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/blackfin/include/asm/scatterlist.h b/arch/blackfin/include/asm/scatterlist.h index 04f448711cd..64d41d34ab0 100644 --- a/arch/blackfin/include/asm/scatterlist.h +++ b/arch/blackfin/include/asm/scatterlist.h @@ -1,27 +1,7 @@ #ifndef _BLACKFIN_SCATTERLIST_H #define _BLACKFIN_SCATTERLIST_H -#include <linux/mm.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/blackfin/kernel/ptrace.c b/arch/blackfin/kernel/ptrace.c index 43eb969405d..6ec77685df5 100644 --- a/arch/blackfin/kernel/ptrace.c +++ b/arch/blackfin/kernel/ptrace.c @@ -292,28 +292,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) break; } -#ifdef CONFIG_BINFMT_ELF_FDPIC - case PTRACE_GETFDPIC: { - unsigned long tmp = 0; - - switch (addr) { - case_PTRACE_GETFDPIC_EXEC: - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case_PTRACE_GETFDPIC_INTERP: - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = put_user(tmp, datap); - break; - } -#endif - /* when I and D space are separate, this will have to be fixed. */ case PTRACE_POKEDATA: pr_debug("ptrace: PTRACE_PEEKDATA\n"); @@ -357,8 +335,14 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) case PTRACE_PEEKUSR: switch (addr) { #ifdef CONFIG_BINFMT_ELF_FDPIC /* backwards compat */ - case PT_FDPIC_EXEC: goto case_PTRACE_GETFDPIC_EXEC; - case PT_FDPIC_INTERP: goto case_PTRACE_GETFDPIC_INTERP; + case PT_FDPIC_EXEC: + request = PTRACE_GETFDPIC; + addr = PTRACE_GETFDPIC_EXEC; + goto case_default; + case PT_FDPIC_INTERP: + request = PTRACE_GETFDPIC; + addr = PTRACE_GETFDPIC_INTERP; + goto case_default; #endif default: ret = get_reg(child, addr, datap); @@ -385,6 +369,7 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(struct pt_regs), (const void __user *)data); + case_default: default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/cris/include/asm/scatterlist.h b/arch/cris/include/asm/scatterlist.h index faff53ad1f9..249a7842ff5 100644 --- a/arch/cris/include/asm/scatterlist.h +++ b/arch/cris/include/asm/scatterlist.h @@ -1,22 +1,7 @@ #ifndef __ASM_CRIS_SCATTERLIST_H #define __ASM_CRIS_SCATTERLIST_H -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to */ - unsigned int length; - - /* The following is i386 highmem junk - not used by us */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - -}; - -#define sg_dma_address(sg) ((sg)->address) -#define sg_dma_len(sg) ((sg)->length) -/* i386 junk */ +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x1fffffff) diff --git a/arch/frv/include/asm/cache.h b/arch/frv/include/asm/cache.h index 7dc0f0f85b7..2797163b8f4 100644 --- a/arch/frv/include/asm/cache.h +++ b/arch/frv/include/asm/cache.h @@ -17,8 +17,6 @@ #define L1_CACHE_SHIFT (CONFIG_FRV_L1_CACHE_SHIFT) #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT) -#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES - #define __cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) #define ____cacheline_aligned __attribute__((aligned(L1_CACHE_BYTES))) diff --git a/arch/frv/include/asm/mem-layout.h b/arch/frv/include/asm/mem-layout.h index 2947764fc0e..ccae981876f 100644 --- a/arch/frv/include/asm/mem-layout.h +++ b/arch/frv/include/asm/mem-layout.h @@ -35,8 +35,8 @@ * the slab must be aligned such that load- and store-double instructions don't * fault if used */ -#define ARCH_KMALLOC_MINALIGN 8 -#define ARCH_SLAB_MINALIGN 8 +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES +#define ARCH_SLAB_MINALIGN L1_CACHE_BYTES /*****************************************************************************/ /* diff --git a/arch/frv/include/asm/scatterlist.h b/arch/frv/include/asm/scatterlist.h index 4bca8a28546..1614bfd7e3a 100644 --- a/arch/frv/include/asm/scatterlist.h +++ b/arch/frv/include/asm/scatterlist.h @@ -1,45 +1,7 @@ #ifndef _ASM_SCATTERLIST_H #define _ASM_SCATTERLIST_H -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_buf(sg, some_ptr, length); - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffffUL) diff --git a/arch/frv/kernel/ptrace.c b/arch/frv/kernel/ptrace.c index 60eeed3694c..fac028936a0 100644 --- a/arch/frv/kernel/ptrace.c +++ b/arch/frv/kernel/ptrace.c @@ -344,26 +344,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(child->thread.user->f), (const void __user *)data); - case PTRACE_GETFDPIC: - tmp = 0; - switch (addr) { - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = 0; - if (put_user(tmp, (unsigned long *) data)) { - ret = -EFAULT; - break; - } - break; - default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/frv/kernel/sysctl.c b/arch/frv/kernel/sysctl.c index 71abd1510a5..6c155d69da2 100644 --- a/arch/frv/kernel/sysctl.c +++ b/arch/frv/kernel/sysctl.c @@ -46,8 +46,9 @@ static void frv_change_dcache_mode(unsigned long newmode) /* * handle requests to dynamically switch the write caching mode delivered by /proc */ -static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int procctl_frv_cachemode(ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) { unsigned long hsr0; char buff[8]; @@ -84,7 +85,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, } /* read the state */ - if (filp->f_pos > 0) { + if (*ppos > 0) { *lenp = 0; return 0; } @@ -110,7 +111,7 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, return -EFAULT; *lenp = len; - filp->f_pos = len; + *ppos = len; return 0; } /* end procctl_frv_cachemode() */ @@ -120,8 +121,9 @@ static int procctl_frv_cachemode(ctl_table *table, int write, struct file *filp, * permit the mm_struct the nominated process is using have its MMU context ID pinned */ #ifdef CONFIG_MMU -static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int procctl_frv_pin_cxnr(ctl_table *table, int write, + void __user *buffer, size_t *lenp, + loff_t *ppos) { pid_t pid; char buff[16], *p; @@ -150,7 +152,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, } /* read the currently pinned CXN */ - if (filp->f_pos > 0) { + if (*ppos > 0) { *lenp = 0; return 0; } @@ -163,7 +165,7 @@ static int procctl_frv_pin_cxnr(ctl_table *table, int write, struct file *filp, return -EFAULT; *lenp = len; - filp->f_pos = len; + *ppos = len; return 0; } /* end procctl_frv_pin_cxnr() */ diff --git a/arch/h8300/include/asm/scatterlist.h b/arch/h8300/include/asm/scatterlist.h index d3ecdd87ac9..de08a4a2cc1 100644 --- a/arch/h8300/include/asm/scatterlist.h +++ b/arch/h8300/include/asm/scatterlist.h @@ -1,17 +1,7 @@ #ifndef _H8300_SCATTERLIST_H #define _H8300_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0xffffffff) diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 9676100b83e..95610820041 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -56,6 +56,9 @@ config MMU config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config SWIOTLB bool @@ -495,6 +498,14 @@ config HAVE_ARCH_NODEDATA_EXTENSION def_bool y depends on NUMA +config USE_PERCPU_NUMA_NODE_ID + def_bool y + depends on NUMA + +config HAVE_MEMORYLESS_NODES + def_bool y + depends on NUMA + config ARCH_PROC_KCORE_TEXT def_bool y depends on PROC_KCORE diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h index 21adbd7f90f..837dc82a013 100644 --- a/arch/ia64/include/asm/acpi.h +++ b/arch/ia64/include/asm/acpi.h @@ -94,7 +94,6 @@ ia64_acpi_release_global_lock (unsigned int *lock) #define acpi_noirq 0 /* ACPI always enabled on IA64 */ #define acpi_pci_disabled 0 /* ACPI PCI always enabled on IA64 */ #define acpi_strict 1 /* no ACPI spec workarounds on IA64 */ -#define acpi_ht 0 /* no HT-only mode on IA64 */ #endif #define acpi_processor_cstate_check(x) (x) /* no idle limits on IA64 :) */ static inline void disable_acpi(void) { } diff --git a/arch/ia64/include/asm/scatterlist.h b/arch/ia64/include/asm/scatterlist.h index d8e98961dec..f299a4fb25c 100644 --- a/arch/ia64/include/asm/scatterlist.h +++ b/arch/ia64/include/asm/scatterlist.h @@ -1,6 +1,7 @@ #ifndef _ASM_IA64_SCATTERLIST_H #define _ASM_IA64_SCATTERLIST_H +#include <asm-generic/scatterlist.h> /* * It used to be that ISA_DMA_THRESHOLD had something to do with the * DMA-limits of ISA-devices. Nowadays, its only remaining use (apart @@ -10,7 +11,6 @@ * that's 4GB - 1. */ #define ISA_DMA_THRESHOLD 0xffffffff - -#include <asm-generic/scatterlist.h> +#define ARCH_HAS_SG_CHAIN #endif /* _ASM_IA64_SCATTERLIST_H */ diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index d323071d0f9..09f646753d1 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -26,11 +26,6 @@ #define RECLAIM_DISTANCE 15 /* - * Returns the number of the node containing CPU 'cpu' - */ -#define cpu_to_node(cpu) (int)(cpu_to_node_map[cpu]) - -/* * Returns a bitmask of CPUs on Node 'node'. */ #define cpumask_of_node(node) ((node) == -1 ? \ diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c index 3095654f9ab..d9485d952ed 100644 --- a/arch/ia64/kernel/pci-swiotlb.c +++ b/arch/ia64/kernel/pci-swiotlb.c @@ -31,8 +31,6 @@ struct dma_map_ops swiotlb_dma_ops = { .unmap_sg = swiotlb_unmap_sg_attrs, .sync_single_for_cpu = swiotlb_sync_single_for_cpu, .sync_single_for_device = swiotlb_sync_single_for_device, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .dma_supported = swiotlb_dma_supported, diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 0dec7f70244..7c7909f9bc9 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -638,7 +638,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) */ read_lock(&tasklist_lock); - if (child->signal) { + if (child->sighand) { spin_lock_irq(&child->sighand->siglock); if (child->state == TASK_STOPPED && !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) { @@ -662,7 +662,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) * job control stop, so that SIGCONT can be used to wake it up. */ read_lock(&tasklist_lock); - if (child->signal) { + if (child->sighand) { spin_lock_irq(&child->sighand->siglock); if (child->state == TASK_TRACED && (child->signal->flags & SIGNAL_STOP_STOPPED)) { diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index e5230b2ff2c..6a1380e90f8 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -390,6 +390,14 @@ smp_callin (void) fix_b0_for_bsp(); +#ifdef CONFIG_NUMA + /* + * numa_node_id() works after this. + */ + set_numa_node(cpu_to_node_map[cpuid]); + set_numa_mem(local_memory_node(cpu_to_node_map[cpuid])); +#endif + ipi_call_lock_irq(); spin_lock(&vector_lock); /* Setup the per cpu irq handling data structures */ @@ -632,6 +640,9 @@ void __devinit smp_prepare_boot_cpu(void) { cpu_set(smp_processor_id(), cpu_online_map); cpu_set(smp_processor_id(), cpu_callin_map); +#ifdef CONFIG_NUMA + set_numa_node(cpu_to_node_map[smp_processor_id()]); +#endif per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE; paravirt_post_smp_prepare_boot_cpu(); } diff --git a/arch/ia64/pci/pci.c b/arch/ia64/pci/pci.c index 64aff520b89..aa2533ae7e9 100644 --- a/arch/ia64/pci/pci.c +++ b/arch/ia64/pci/pci.c @@ -335,8 +335,11 @@ pcibios_setup_root_windows(struct pci_bus *bus, struct pci_controller *ctrl) } struct pci_bus * __devinit -pci_acpi_scan_root(struct acpi_device *device, int domain, int bus) +pci_acpi_scan_root(struct acpi_pci_root *root) { + struct acpi_device *device = root->device; + int domain = root->segment; + int bus = root->secondary.start; struct pci_controller *controller; unsigned int windows = 0; struct pci_bus *pbus; diff --git a/arch/m32r/include/asm/scatterlist.h b/arch/m32r/include/asm/scatterlist.h index 1ed372c73d0..aeeddd8dac1 100644 --- a/arch/m32r/include/asm/scatterlist.h +++ b/arch/m32r/include/asm/scatterlist.h @@ -1,20 +1,7 @@ #ifndef _ASM_M32R_SCATTERLIST_H #define _ASM_M32R_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - char * address; /* Location data is to be transferred to, NULL for - * highmem page */ - unsigned long page_link; - unsigned int offset;/* for highmem, page offset */ - - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x1fffffff) diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index b5da298ba61..2e3737b92ff 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -7,6 +7,7 @@ config M68K default y select HAVE_AOUT select HAVE_IDE + select GENERIC_ATOMIC64 config MMU bool diff --git a/arch/m68k/amiga/config.c b/arch/m68k/amiga/config.c index d2cc35d9853..b1577f741fa 100644 --- a/arch/m68k/amiga/config.c +++ b/arch/m68k/amiga/config.c @@ -97,10 +97,6 @@ static void amiga_get_model(char *model); static void amiga_get_hardware_list(struct seq_file *m); /* amiga specific timer functions */ static unsigned long amiga_gettimeoffset(void); -static int a3000_hwclk(int, struct rtc_time *); -static int a2000_hwclk(int, struct rtc_time *); -static int amiga_set_clock_mmss(unsigned long); -static unsigned int amiga_get_ss(void); extern void amiga_mksound(unsigned int count, unsigned int ticks); static void amiga_reset(void); extern void amiga_init_sound(void); @@ -138,10 +134,6 @@ static struct { } }; -static struct resource rtc_resource = { - .start = 0x00dc0000, .end = 0x00dcffff -}; - static struct resource ram_resource[NUM_MEMINFO]; @@ -387,15 +379,6 @@ void __init config_amiga(void) mach_get_model = amiga_get_model; mach_get_hardware_list = amiga_get_hardware_list; mach_gettimeoffset = amiga_gettimeoffset; - if (AMIGAHW_PRESENT(A3000_CLK)) { - mach_hwclk = a3000_hwclk; - rtc_resource.name = "A3000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - mach_hwclk = a2000_hwclk; - rtc_resource.name = "A2000 RTC"; - request_resource(&iomem_resource, &rtc_resource); - } /* * default MAX_DMA=0xffffffff on all machines. If we don't do so, the SCSI @@ -404,8 +387,6 @@ void __init config_amiga(void) */ mach_max_dma_address = 0xffffffff; - mach_set_clock_mmss = amiga_set_clock_mmss; - mach_get_ss = amiga_get_ss; mach_reset = amiga_reset; #if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) mach_beep = amiga_mksound; @@ -530,161 +511,6 @@ static unsigned long amiga_gettimeoffset(void) return ticks + offset; } -static int a3000_hwclk(int op, struct rtc_time *t) -{ - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - - if (!op) { /* read */ - t->tm_sec = tod_3000.second1 * 10 + tod_3000.second2; - t->tm_min = tod_3000.minute1 * 10 + tod_3000.minute2; - t->tm_hour = tod_3000.hour1 * 10 + tod_3000.hour2; - t->tm_mday = tod_3000.day1 * 10 + tod_3000.day2; - t->tm_wday = tod_3000.weekday; - t->tm_mon = tod_3000.month1 * 10 + tod_3000.month2 - 1; - t->tm_year = tod_3000.year1 * 10 + tod_3000.year2; - if (t->tm_year <= 69) - t->tm_year += 100; - } else { - tod_3000.second1 = t->tm_sec / 10; - tod_3000.second2 = t->tm_sec % 10; - tod_3000.minute1 = t->tm_min / 10; - tod_3000.minute2 = t->tm_min % 10; - tod_3000.hour1 = t->tm_hour / 10; - tod_3000.hour2 = t->tm_hour % 10; - tod_3000.day1 = t->tm_mday / 10; - tod_3000.day2 = t->tm_mday % 10; - if (t->tm_wday != -1) - tod_3000.weekday = t->tm_wday; - tod_3000.month1 = (t->tm_mon + 1) / 10; - tod_3000.month2 = (t->tm_mon + 1) % 10; - if (t->tm_year >= 100) - t->tm_year -= 100; - tod_3000.year1 = t->tm_year / 10; - tod_3000.year2 = t->tm_year % 10; - } - - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - - return 0; -} - -static int a2000_hwclk(int op, struct rtc_time *t) -{ - int cnt = 5; - - tod_2000.cntrl1 = TOD2000_CNTRL1_HOLD; - - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - udelay(70); - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - --cnt; - } - - if (!cnt) - printk(KERN_INFO "hwclk: timed out waiting for RTC (0x%x)\n", - tod_2000.cntrl1); - - if (!op) { /* read */ - t->tm_sec = tod_2000.second1 * 10 + tod_2000.second2; - t->tm_min = tod_2000.minute1 * 10 + tod_2000.minute2; - t->tm_hour = (tod_2000.hour1 & 3) * 10 + tod_2000.hour2; - t->tm_mday = tod_2000.day1 * 10 + tod_2000.day2; - t->tm_wday = tod_2000.weekday; - t->tm_mon = tod_2000.month1 * 10 + tod_2000.month2 - 1; - t->tm_year = tod_2000.year1 * 10 + tod_2000.year2; - if (t->tm_year <= 69) - t->tm_year += 100; - - if (!(tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE)) { - if (!(tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour == 12) - t->tm_hour = 0; - else if ((tod_2000.hour1 & TOD2000_HOUR1_PM) && t->tm_hour != 12) - t->tm_hour += 12; - } - } else { - tod_2000.second1 = t->tm_sec / 10; - tod_2000.second2 = t->tm_sec % 10; - tod_2000.minute1 = t->tm_min / 10; - tod_2000.minute2 = t->tm_min % 10; - if (tod_2000.cntrl3 & TOD2000_CNTRL3_24HMODE) - tod_2000.hour1 = t->tm_hour / 10; - else if (t->tm_hour >= 12) - tod_2000.hour1 = TOD2000_HOUR1_PM + - (t->tm_hour - 12) / 10; - else - tod_2000.hour1 = t->tm_hour / 10; - tod_2000.hour2 = t->tm_hour % 10; - tod_2000.day1 = t->tm_mday / 10; - tod_2000.day2 = t->tm_mday % 10; - if (t->tm_wday != -1) - tod_2000.weekday = t->tm_wday; - tod_2000.month1 = (t->tm_mon + 1) / 10; - tod_2000.month2 = (t->tm_mon + 1) % 10; - if (t->tm_year >= 100) - t->tm_year -= 100; - tod_2000.year1 = t->tm_year / 10; - tod_2000.year2 = t->tm_year % 10; - } - - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - - return 0; -} - -static int amiga_set_clock_mmss(unsigned long nowtime) -{ - short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; - - if (AMIGAHW_PRESENT(A3000_CLK)) { - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - - tod_3000.second1 = real_seconds / 10; - tod_3000.second2 = real_seconds % 10; - tod_3000.minute1 = real_minutes / 10; - tod_3000.minute2 = real_minutes % 10; - - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - int cnt = 5; - - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - - while ((tod_2000.cntrl1 & TOD2000_CNTRL1_BUSY) && cnt) { - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - udelay(70); - tod_2000.cntrl1 |= TOD2000_CNTRL1_HOLD; - --cnt; - } - - if (!cnt) - printk(KERN_INFO "set_clock_mmss: timed out waiting for RTC (0x%x)\n", tod_2000.cntrl1); - - tod_2000.second1 = real_seconds / 10; - tod_2000.second2 = real_seconds % 10; - tod_2000.minute1 = real_minutes / 10; - tod_2000.minute2 = real_minutes % 10; - - tod_2000.cntrl1 &= ~TOD2000_CNTRL1_HOLD; - } - - return 0; -} - -static unsigned int amiga_get_ss(void) -{ - unsigned int s; - - if (AMIGAHW_PRESENT(A3000_CLK)) { - tod_3000.cntrl1 = TOD3000_CNTRL1_HOLD; - s = tod_3000.second1 * 10 + tod_3000.second2; - tod_3000.cntrl1 = TOD3000_CNTRL1_FREE; - } else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ { - s = tod_2000.second1 * 10 + tod_2000.second2; - } - return s; -} - static NORET_TYPE void amiga_reset(void) ATTRIB_NORET; diff --git a/arch/m68k/amiga/platform.c b/arch/m68k/amiga/platform.c index 38f18bf1473..7fd8b41723e 100644 --- a/arch/m68k/amiga/platform.c +++ b/arch/m68k/amiga/platform.c @@ -11,6 +11,7 @@ #include <linux/zorro.h> #include <asm/amigahw.h> +#include <asm/amigayle.h> #ifdef CONFIG_ZORRO @@ -55,11 +56,77 @@ static int __init amiga_init_bus(void) subsys_initcall(amiga_init_bus); -#endif /* CONFIG_ZORRO */ + +static int z_dev_present(zorro_id id) +{ + unsigned int i; + + for (i = 0; i < zorro_num_autocon; i++) + if (zorro_autocon[i].rom.er_Manufacturer == ZORRO_MANUF(id) && + zorro_autocon[i].rom.er_Product == ZORRO_PROD(id)) + return 1; + + return 0; +} + +#else /* !CONFIG_ZORRO */ + +static inline int z_dev_present(zorro_id id) { return 0; } + +#endif /* !CONFIG_ZORRO */ + + +static const struct resource a3000_scsi_resource __initconst = { + .start = 0xdd0000, + .end = 0xdd00ff, + .flags = IORESOURCE_MEM, +}; + + +static const struct resource a4000t_scsi_resource __initconst = { + .start = 0xdd0000, + .end = 0xdd0fff, + .flags = IORESOURCE_MEM, +}; + + +static const struct resource a1200_ide_resource __initconst = { + .start = 0xda0000, + .end = 0xda1fff, + .flags = IORESOURCE_MEM, +}; + +static const struct gayle_ide_platform_data a1200_ide_pdata __initconst = { + .base = 0xda0000, + .irqport = 0xda9000, + .explicit_ack = 1, +}; + + +static const struct resource a4000_ide_resource __initconst = { + .start = 0xdd2000, + .end = 0xdd3fff, + .flags = IORESOURCE_MEM, +}; + +static const struct gayle_ide_platform_data a4000_ide_pdata __initconst = { + .base = 0xdd2020, + .irqport = 0xdd3020, + .explicit_ack = 0, +}; + + +static const struct resource amiga_rtc_resource __initconst = { + .start = 0x00dc0000, + .end = 0x00dcffff, + .flags = IORESOURCE_MEM, +}; static int __init amiga_init_devices(void) { + struct platform_device *pdev; + if (!MACH_IS_AMIGA) return -ENODEV; @@ -77,6 +144,53 @@ static int __init amiga_init_devices(void) if (AMIGAHW_PRESENT(AMI_FLOPPY)) platform_device_register_simple("amiga-floppy", -1, NULL, 0); + if (AMIGAHW_PRESENT(A3000_SCSI)) + platform_device_register_simple("amiga-a3000-scsi", -1, + &a3000_scsi_resource, 1); + + if (AMIGAHW_PRESENT(A4000_SCSI)) + platform_device_register_simple("amiga-a4000t-scsi", -1, + &a4000t_scsi_resource, 1); + + if (AMIGAHW_PRESENT(A1200_IDE) || + z_dev_present(ZORRO_PROD_MTEC_VIPER_MK_V_E_MATRIX_530_SCSI_IDE)) { + pdev = platform_device_register_simple("amiga-gayle-ide", -1, + &a1200_ide_resource, 1); + platform_device_add_data(pdev, &a1200_ide_pdata, + sizeof(a1200_ide_pdata)); + } + + if (AMIGAHW_PRESENT(A4000_IDE)) { + pdev = platform_device_register_simple("amiga-gayle-ide", -1, + &a4000_ide_resource, 1); + platform_device_add_data(pdev, &a4000_ide_pdata, + sizeof(a4000_ide_pdata)); + } + + + /* other I/O hardware */ + if (AMIGAHW_PRESENT(AMI_KEYBOARD)) + platform_device_register_simple("amiga-keyboard", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_MOUSE)) + platform_device_register_simple("amiga-mouse", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_SERIAL)) + platform_device_register_simple("amiga-serial", -1, NULL, 0); + + if (AMIGAHW_PRESENT(AMI_PARALLEL)) + platform_device_register_simple("amiga-parallel", -1, NULL, 0); + + + /* real time clocks */ + if (AMIGAHW_PRESENT(A2000_CLK)) + platform_device_register_simple("rtc-msm6242", -1, + &amiga_rtc_resource, 1); + + if (AMIGAHW_PRESENT(A3000_CLK)) + platform_device_register_simple("rtc-rp5c01", -1, + &amiga_rtc_resource, 1); + return 0; } diff --git a/arch/m68k/include/asm/amigayle.h b/arch/m68k/include/asm/amigayle.h index bb5a6aa329f..a01453d9c23 100644 --- a/arch/m68k/include/asm/amigayle.h +++ b/arch/m68k/include/asm/amigayle.h @@ -104,4 +104,10 @@ struct GAYLE { #define GAYLE_CFG_250NS 0x00 #define GAYLE_CFG_720NS 0x0c +struct gayle_ide_platform_data { + unsigned long base; + unsigned long irqport; + int explicit_ack; /* A1200 IDE needs explicit ack */ +}; + #endif /* asm-m68k/amigayle.h */ diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h index 8d29145ebb2..eab36dcacf6 100644 --- a/arch/m68k/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic.h @@ -3,3 +3,5 @@ #else #include "atomic_mm.h" #endif + +#include <asm-generic/atomic64.h> diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h index fed3fd30de7..ecafbe1718c 100644 --- a/arch/m68k/include/asm/cache.h +++ b/arch/m68k/include/asm/cache.h @@ -8,4 +8,6 @@ #define L1_CACHE_SHIFT 4 #define L1_CACHE_BYTES (1<< L1_CACHE_SHIFT) +#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES + #endif diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h index e27ad902b1c..175da06c6b9 100644 --- a/arch/m68k/include/asm/scatterlist.h +++ b/arch/m68k/include/asm/scatterlist.h @@ -1,23 +1,9 @@ #ifndef _M68K_SCATTERLIST_H #define _M68K_SCATTERLIST_H -#include <linux/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - dma_addr_t dma_address; /* A place to hang host-specific addresses at. */ -}; +#include <asm-generic/scatterlist.h> /* This is bogus and should go away. */ #define ISA_DMA_THRESHOLD (0x00ffffff) -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* !(_M68K_SCATTERLIST_H) */ diff --git a/arch/microblaze/include/asm/scatterlist.h b/arch/microblaze/include/asm/scatterlist.h index 35d786fe93a..dc4a8900cc8 100644 --- a/arch/microblaze/include/asm/scatterlist.h +++ b/arch/microblaze/include/asm/scatterlist.h @@ -1 +1,3 @@ #include <asm-generic/scatterlist.h> + +#define ISA_DMA_THRESHOLD (~0UL) diff --git a/arch/mips/include/asm/scatterlist.h b/arch/mips/include/asm/scatterlist.h index 83d69fe17c9..9af65e79be3 100644 --- a/arch/mips/include/asm/scatterlist.h +++ b/arch/mips/include/asm/scatterlist.h @@ -1,27 +1,7 @@ #ifndef __ASM_SCATTERLIST_H #define __ASM_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x00ffffffUL) diff --git a/arch/mn10300/include/asm/scatterlist.h b/arch/mn10300/include/asm/scatterlist.h index 67535901b9f..7bd00b9e030 100644 --- a/arch/mn10300/include/asm/scatterlist.h +++ b/arch/mn10300/include/asm/scatterlist.h @@ -11,45 +11,8 @@ #ifndef _ASM_SCATTERLIST_H #define _ASM_SCATTERLIST_H -#include <asm/types.h> - -/* - * Drivers must set either ->address or (preferred) page and ->offset - * to indicate where data must be transferred to/from. - * - * Using page is recommended since it handles highmem data as well as - * low mem. ->address is restricted to data which has a virtual mapping, and - * it will go away in the future. Updating to page can be automated very - * easily -- something like - * - * sg->address = some_ptr; - * - * can be rewritten as - * - * sg_set_page(virt_to_page(some_ptr)); - * sg->offset = (unsigned long) some_ptr & ~PAGE_MASK; - * - * and that's it. There's no excuse for not highmem enabling YOUR driver. /jens - */ -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; /* for highmem, page offset */ - dma_addr_t dma_address; - unsigned int length; -}; +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (0x00ffffff) -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - #endif /* _ASM_SCATTERLIST_H */ diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 9c4da3d63bf..05a366a5c4d 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -98,6 +98,9 @@ config STACKTRACE_SUPPORT config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config ISA_DMA_API bool diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h index 477277739da..4556d820128 100644 --- a/arch/parisc/include/asm/cacheflush.h +++ b/arch/parisc/include/asm/cacheflush.h @@ -2,6 +2,7 @@ #define _PARISC_CACHEFLUSH_H #include <linux/mm.h> +#include <linux/uaccess.h> /* The usual comment is "Caches aren't brain-dead on the <architecture>". * Unfortunately, that doesn't apply to PA-RISC. */ @@ -125,11 +126,20 @@ static inline void *kmap(struct page *page) #define kunmap(page) kunmap_parisc(page_address(page)) -#define kmap_atomic(page, idx) page_address(page) +static inline void *kmap_atomic(struct page *page, enum km_type idx) +{ + pagefault_disable(); + return page_address(page); +} -#define kunmap_atomic(addr, idx) kunmap_parisc(addr) +static inline void kunmap_atomic(void *addr, enum km_type idx) +{ + kunmap_parisc(addr); + pagefault_enable(); +} -#define kmap_atomic_pfn(pfn, idx) page_address(pfn_to_page(pfn)) +#define kmap_atomic_prot(page, idx, prot) kmap_atomic(page, idx) +#define kmap_atomic_pfn(pfn, idx) kmap_atomic(pfn_to_page(pfn), (idx)) #define kmap_atomic_to_page(ptr) virt_to_page(ptr) #endif diff --git a/arch/parisc/include/asm/scatterlist.h b/arch/parisc/include/asm/scatterlist.h index 62269b31ebf..2c3b79b54b2 100644 --- a/arch/parisc/include/asm/scatterlist.h +++ b/arch/parisc/include/asm/scatterlist.h @@ -3,25 +3,9 @@ #include <asm/page.h> #include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - - unsigned int length; - - /* an IOVA can be 64-bits on some PA-Risc platforms. */ - dma_addr_t iova; /* I/O Virtual Address */ - __u32 iova_length; /* bytes mapped */ -}; - -#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg)) -#define sg_dma_address(sg) ((sg)->iova) -#define sg_dma_len(sg) ((sg)->iova_length) +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) +#define sg_virt_addr(sg) ((unsigned long)sg_virt(sg)) #endif /* _ASM_PARISC_SCATTERLIST_H */ diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c index ec787b411e9..dcd55103a4b 100644 --- a/arch/parisc/kernel/asm-offsets.c +++ b/arch/parisc/kernel/asm-offsets.c @@ -45,8 +45,12 @@ #else #define FRAME_SIZE 64 #endif +#define FRAME_ALIGN 64 -#define align(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y))) +/* Add FRAME_SIZE to the size x and align it to y. All definitions + * that use align_frame will include space for a frame. + */ +#define align_frame(x,y) (((x)+FRAME_SIZE+(y)-1) - (((x)+(y)-1)%(y))) int main(void) { @@ -146,7 +150,8 @@ int main(void) DEFINE(TASK_PT_IOR, offsetof(struct task_struct, thread.regs.ior)); BLANK(); DEFINE(TASK_SZ, sizeof(struct task_struct)); - DEFINE(TASK_SZ_ALGN, align(sizeof(struct task_struct), 64)); + /* TASK_SZ_ALGN includes space for a stack frame. */ + DEFINE(TASK_SZ_ALGN, align_frame(sizeof(struct task_struct), FRAME_ALIGN)); BLANK(); DEFINE(PT_PSW, offsetof(struct pt_regs, gr[ 0])); DEFINE(PT_GR1, offsetof(struct pt_regs, gr[ 1])); @@ -233,7 +238,8 @@ int main(void) DEFINE(PT_ISR, offsetof(struct pt_regs, isr)); DEFINE(PT_IOR, offsetof(struct pt_regs, ior)); DEFINE(PT_SIZE, sizeof(struct pt_regs)); - DEFINE(PT_SZ_ALGN, align(sizeof(struct pt_regs), 64)); + /* PT_SZ_ALGN includes space for a stack frame. */ + DEFINE(PT_SZ_ALGN, align_frame(sizeof(struct pt_regs), FRAME_ALIGN)); BLANK(); DEFINE(TI_TASK, offsetof(struct thread_info, task)); DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain)); @@ -242,7 +248,8 @@ int main(void) DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit)); DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count)); DEFINE(THREAD_SZ, sizeof(struct thread_info)); - DEFINE(THREAD_SZ_ALGN, align(sizeof(struct thread_info), 64)); + /* THREAD_SZ_ALGN includes space for a stack frame. */ + DEFINE(THREAD_SZ_ALGN, align_frame(sizeof(struct thread_info), FRAME_ALIGN)); BLANK(); DEFINE(ICACHE_BASE, offsetof(struct pdc_cache_info, ic_base)); DEFINE(ICACHE_STRIDE, offsetof(struct pdc_cache_info, ic_stride)); diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 3a44f7f704f..6337adef30f 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -364,32 +364,6 @@ .align 32 .endm - /* The following are simple 32 vs 64 bit instruction - * abstractions for the macros */ - .macro EXTR reg1,start,length,reg2 -#ifdef CONFIG_64BIT - extrd,u \reg1,32+(\start),\length,\reg2 -#else - extrw,u \reg1,\start,\length,\reg2 -#endif - .endm - - .macro DEP reg1,start,length,reg2 -#ifdef CONFIG_64BIT - depd \reg1,32+(\start),\length,\reg2 -#else - depw \reg1,\start,\length,\reg2 -#endif - .endm - - .macro DEPI val,start,length,reg -#ifdef CONFIG_64BIT - depdi \val,32+(\start),\length,\reg -#else - depwi \val,\start,\length,\reg -#endif - .endm - /* In LP64, the space contains part of the upper 32 bits of the * fault. We have to extract this and place it in the va, * zeroing the corresponding bits in the space register */ @@ -442,19 +416,19 @@ */ .macro L2_ptep pmd,pte,index,va,fault #if PT_NLEVELS == 3 - EXTR \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index + extru \va,31-ASM_PMD_SHIFT,ASM_BITS_PER_PMD,\index #else - EXTR \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index + extru \va,31-ASM_PGDIR_SHIFT,ASM_BITS_PER_PGD,\index #endif - DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ + dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */ copy %r0,\pte ldw,s \index(\pmd),\pmd bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault - DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ + dep %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */ copy \pmd,%r9 SHLREG %r9,PxD_VALUE_SHIFT,\pmd - EXTR \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index - DEP %r0,31,PAGE_SHIFT,\pmd /* clear offset */ + extru \va,31-PAGE_SHIFT,ASM_BITS_PER_PTE,\index + dep %r0,31,PAGE_SHIFT,\pmd /* clear offset */ shladd \index,BITS_PER_PTE_ENTRY,\pmd,\pmd LDREG %r0(\pmd),\pte /* pmd is now pte */ bb,>=,n \pte,_PAGE_PRESENT_BIT,\fault @@ -605,7 +579,7 @@ depdi 0,31,32,\tmp #endif copy \va,\tmp1 - DEPI 0,31,23,\tmp1 + depi 0,31,23,\tmp1 cmpb,COND(<>),n \tmp,\tmp1,\fault ldi (_PAGE_DIRTY|_PAGE_WRITE|_PAGE_READ),\prot depd,z \prot,8,7,\prot @@ -997,13 +971,6 @@ intr_restore: rfi nop - nop - nop - nop - nop - nop - nop - nop #ifndef CONFIG_PREEMPT # define intr_do_preempt intr_restore @@ -2076,9 +2043,10 @@ syscall_restore: LDREG TASK_PT_GR31(%r1),%r31 /* restore syscall rp */ /* NOTE: We use rsm/ssm pair to make this operation atomic */ + LDREG TASK_PT_GR30(%r1),%r1 /* Get user sp */ rsm PSW_SM_I, %r0 - LDREG TASK_PT_GR30(%r1),%r30 /* restore user sp */ - mfsp %sr3,%r1 /* Get users space id */ + copy %r1,%r30 /* Restore user sp */ + mfsp %sr3,%r1 /* Get user space id */ mtsp %r1,%sr7 /* Restore sr7 */ ssm PSW_SM_I, %r0 diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index f5f96021caa..68e75ce838d 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -47,18 +47,17 @@ ENTRY(linux_gateway_page) KILL_INSN .endr - /* ADDRESS 0xb0 to 0xb4, lws uses 1 insns for entry */ + /* ADDRESS 0xb0 to 0xb8, lws uses two insns for entry */ /* Light-weight-syscall entry must always be located at 0xb0 */ /* WARNING: Keep this number updated with table size changes */ #define __NR_lws_entries (2) lws_entry: - /* Unconditional branch to lws_start, located on the - same gateway page */ - b,n lws_start + gate lws_start, %r0 /* increase privilege */ + depi 3, 31, 2, %r31 /* Ensure we return into user mode. */ - /* Fill from 0xb4 to 0xe0 */ - .rept 11 + /* Fill from 0xb8 to 0xe0 */ + .rept 10 KILL_INSN .endr @@ -423,9 +422,6 @@ tracesys_sigexit: *********************************************************/ lws_start: - /* Gate and ensure we return to userspace */ - gate .+8, %r0 - depi 3, 31, 2, %r31 /* Ensure we return to userspace */ #ifdef CONFIG_64BIT /* FIXME: If we are a 64-bit kernel just @@ -442,7 +438,7 @@ lws_start: #endif /* Is the lws entry number valid? */ - comiclr,>>= __NR_lws_entries, %r20, %r0 + comiclr,>> __NR_lws_entries, %r20, %r0 b,n lws_exit_nosys /* WARNING: Trashing sr2 and sr3 */ @@ -473,7 +469,7 @@ lws_exit: /* now reset the lowest bit of sp if it was set */ xor %r30,%r1,%r30 #endif - be,n 0(%sr3, %r31) + be,n 0(%sr7, %r31) @@ -529,7 +525,6 @@ lws_compare_and_swap32: #endif lws_compare_and_swap: -#ifdef CONFIG_SMP /* Load start of lock table */ ldil L%lws_lock_start, %r20 ldo R%lws_lock_start(%r20), %r28 @@ -572,8 +567,6 @@ cas_wouldblock: ldo 2(%r0), %r28 /* 2nd case */ b lws_exit /* Contended... */ ldo -EAGAIN(%r0), %r21 /* Spin in userspace */ -#endif -/* CONFIG_SMP */ /* prev = *addr; @@ -601,13 +594,11 @@ cas_action: 1: ldw 0(%sr3,%r26), %r28 sub,<> %r28, %r25, %r0 2: stw %r24, 0(%sr3,%r26) -#ifdef CONFIG_SMP /* Free lock */ stw %r20, 0(%sr2,%r20) -# if ENABLE_LWS_DEBUG +#if ENABLE_LWS_DEBUG /* Clear thread register indicator */ stw %r0, 4(%sr2,%r20) -# endif #endif /* Return to userspace, set no error */ b lws_exit @@ -615,12 +606,10 @@ cas_action: 3: /* Error occured on load or store */ -#ifdef CONFIG_SMP /* Free lock */ stw %r20, 0(%sr2,%r20) -# if ENABLE_LWS_DEBUG +#if ENABLE_LWS_DEBUG stw %r0, 4(%sr2,%r20) -# endif #endif b lws_exit ldo -EFAULT(%r0),%r21 /* set errno */ @@ -672,7 +661,6 @@ ENTRY(sys_call_table64) END(sys_call_table64) #endif -#ifdef CONFIG_SMP /* All light-weight-syscall atomic operations will use this set of locks @@ -694,8 +682,6 @@ ENTRY(lws_lock_start) .endr END(lws_lock_start) .previous -#endif -/* CONFIG_SMP for lws_lock_start */ .end diff --git a/arch/parisc/math-emu/decode_exc.c b/arch/parisc/math-emu/decode_exc.c index 3ca1c614921..27a7492ddb0 100644 --- a/arch/parisc/math-emu/decode_exc.c +++ b/arch/parisc/math-emu/decode_exc.c @@ -342,6 +342,7 @@ decode_fpu(unsigned int Fpu_register[], unsigned int trap_counts[]) return SIGNALCODE(SIGFPE, FPE_FLTINV); case DIVISIONBYZEROEXCEPTION: update_trap_counts(Fpu_register, aflags, bflags, trap_counts); + Clear_excp_register(exception_index); return SIGNALCODE(SIGFPE, FPE_FLTDIV); case INEXACTEXCEPTION: update_trap_counts(Fpu_register, aflags, bflags, trap_counts); diff --git a/arch/parisc/mm/fault.c b/arch/parisc/mm/fault.c index c6afbfc9577..18162ce4261 100644 --- a/arch/parisc/mm/fault.c +++ b/arch/parisc/mm/fault.c @@ -264,8 +264,7 @@ no_context: out_of_memory: up_read(&mm->mmap_sem); - printk(KERN_CRIT "VM: killing process %s\n", current->comm); - if (user_mode(regs)) - do_group_exit(SIGKILL); - goto no_context; + if (!user_mode(regs)) + goto no_context; + pagefault_out_of_memory(); } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index c4c4549c22b..66a315e06dc 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -663,6 +663,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool (PPC64 || NOT_COHERENT_CACHE) +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool depends on PPC64 || POWER4 || 6xx && !CPM2 diff --git a/arch/powerpc/include/asm/scatterlist.h b/arch/powerpc/include/asm/scatterlist.h index 912bf597870..34cc78fd0ef 100644 --- a/arch/powerpc/include/asm/scatterlist.h +++ b/arch/powerpc/include/asm/scatterlist.h @@ -9,38 +9,12 @@ * 2 of the License, or (at your option) any later version. */ -#ifdef __KERNEL__ -#include <linux/types.h> #include <asm/dma.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - unsigned int length; - - /* For TCE or SWIOTLB support */ - dma_addr_t dma_address; - u32 dma_length; -}; - -/* - * These macros should be used after a dma_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->dma_length) +#include <asm-generic/scatterlist.h> #ifdef __powerpc64__ #define ISA_DMA_THRESHOLD (~0UL) #endif - #define ARCH_HAS_SG_CHAIN -#endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_SCATTERLIST_H */ diff --git a/arch/powerpc/kernel/dma-swiotlb.c b/arch/powerpc/kernel/dma-swiotlb.c index 4ff4da2c238..e7fe218b869 100644 --- a/arch/powerpc/kernel/dma-swiotlb.c +++ b/arch/powerpc/kernel/dma-swiotlb.c @@ -39,8 +39,8 @@ struct dma_map_ops swiotlb_dma_ops = { .dma_supported = swiotlb_dma_supported, .map_page = swiotlb_map_page, .unmap_page = swiotlb_unmap_page, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .mapping_error = swiotlb_dma_mapping_error, diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c index 6c1df5757cd..8d1de6f31d5 100644 --- a/arch/powerpc/kernel/dma.c +++ b/arch/powerpc/kernel/dma.c @@ -127,11 +127,11 @@ static inline void dma_direct_sync_sg(struct device *dev, __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction); } -static inline void dma_direct_sync_single_range(struct device *dev, - dma_addr_t dma_handle, unsigned long offset, size_t size, - enum dma_data_direction direction) +static inline void dma_direct_sync_single(struct device *dev, + dma_addr_t dma_handle, size_t size, + enum dma_data_direction direction) { - __dma_sync(bus_to_virt(dma_handle+offset), size, direction); + __dma_sync(bus_to_virt(dma_handle), size, direction); } #endif @@ -144,8 +144,8 @@ struct dma_map_ops dma_direct_ops = { .map_page = dma_direct_map_page, .unmap_page = dma_direct_unmap_page, #ifdef CONFIG_NOT_COHERENT_CACHE - .sync_single_range_for_cpu = dma_direct_sync_single_range, - .sync_single_range_for_device = dma_direct_sync_single_range, + .sync_single_for_cpu = dma_direct_sync_single, + .sync_single_for_device = dma_direct_sync_single, .sync_sg_for_cpu = dma_direct_sync_sg, .sync_sg_for_device = dma_direct_sync_sg, #endif diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 5c280825251..1a40da92154 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -1849,8 +1849,7 @@ out: return ret; } -static int spufs_mfc_fsync(struct file *file, struct dentry *dentry, - int datasync) +static int spufs_mfc_fsync(struct file *file, int datasync) { return spufs_mfc_flush(file, NULL); } diff --git a/arch/powerpc/platforms/cell/spufs/inode.c b/arch/powerpc/platforms/cell/spufs/inode.c index fc1b1c42b1d..e5e5f823d68 100644 --- a/arch/powerpc/platforms/cell/spufs/inode.c +++ b/arch/powerpc/platforms/cell/spufs/inode.c @@ -251,7 +251,7 @@ const struct file_operations spufs_context_fops = { .llseek = dcache_dir_lseek, .read = generic_read_dir, .readdir = dcache_readdir, - .fsync = simple_sync_file, + .fsync = noop_fsync, }; EXPORT_SYMBOL_GPL(spufs_context_fops); diff --git a/arch/powerpc/platforms/pseries/hvCall_inst.c b/arch/powerpc/platforms/pseries/hvCall_inst.c index 1fefae76e29..e19ff021e71 100644 --- a/arch/powerpc/platforms/pseries/hvCall_inst.c +++ b/arch/powerpc/platforms/pseries/hvCall_inst.c @@ -102,7 +102,7 @@ static const struct file_operations hcall_inst_seq_fops = { #define CPU_NAME_BUF_SIZE 32 -static void probe_hcall_entry(unsigned long opcode, unsigned long *args) +static void probe_hcall_entry(void *ignored, unsigned long opcode, unsigned long *args) { struct hcall_stats *h; @@ -114,7 +114,7 @@ static void probe_hcall_entry(unsigned long opcode, unsigned long *args) h->purr_start = mfspr(SPRN_PURR); } -static void probe_hcall_exit(unsigned long opcode, unsigned long retval, +static void probe_hcall_exit(void *ignored, unsigned long opcode, unsigned long retval, unsigned long *retbuf) { struct hcall_stats *h; @@ -140,11 +140,11 @@ static int __init hcall_inst_init(void) if (!firmware_has_feature(FW_FEATURE_LPAR)) return 0; - if (register_trace_hcall_entry(probe_hcall_entry)) + if (register_trace_hcall_entry(probe_hcall_entry, NULL)) return -EINVAL; - if (register_trace_hcall_exit(probe_hcall_exit)) { - unregister_trace_hcall_entry(probe_hcall_entry); + if (register_trace_hcall_exit(probe_hcall_exit, NULL)) { + unregister_trace_hcall_entry(probe_hcall_entry, NULL); return -EINVAL; } diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 6a1fde0d22b..cd37e49e703 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -1,6 +1,15 @@ /* * Freescale MPC85xx/MPC86xx RapidIO support * + * Copyright 2009 Sysgo AG + * Thomas Moll <thomas.moll@sysgo.com> + * - fixed maintenance access routines, check for aligned access + * + * Copyright 2009 Integrated Device Technology, Inc. + * Alex Bounine <alexandre.bounine@idt.com> + * - Added Port-Write message handling + * - Added Machine Check exception handling + * * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. * Zhang Wei <wei.zhang@freescale.com> * @@ -24,19 +33,30 @@ #include <linux/of_platform.h> #include <linux/delay.h> #include <linux/slab.h> +#include <linux/kfifo.h> #include <asm/io.h> +#include <asm/machdep.h> +#include <asm/uaccess.h> + +#undef DEBUG_PW /* Port-Write debugging */ /* RapidIO definition irq, which read from OF-tree */ #define IRQ_RIO_BELL(m) (((struct rio_priv *)(m->priv))->bellirq) #define IRQ_RIO_TX(m) (((struct rio_priv *)(m->priv))->txirq) #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) +#define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_P_MSG_REGS_OFFSET 0x11000 #define RIO_S_MSG_REGS_OFFSET 0x13000 #define RIO_ESCSR 0x158 #define RIO_CCSR 0x15c +#define RIO_LTLEDCSR 0x0608 +#define RIO_LTLEDCSR_IER 0x80000000 +#define RIO_LTLEDCSR_PRT 0x01000000 +#define RIO_LTLEECSR 0x060c +#define RIO_EPWISR 0x10010 #define RIO_ISR_AACR 0x10120 #define RIO_ISR_AACR_AA 0x1 /* Accept All ID */ #define RIO_MAINT_WIN_SIZE 0x400000 @@ -55,6 +75,18 @@ #define RIO_MSG_ISR_QFI 0x00000010 #define RIO_MSG_ISR_DIQI 0x00000001 +#define RIO_IPWMR_SEN 0x00100000 +#define RIO_IPWMR_QFIE 0x00000100 +#define RIO_IPWMR_EIE 0x00000020 +#define RIO_IPWMR_CQ 0x00000002 +#define RIO_IPWMR_PWE 0x00000001 + +#define RIO_IPWSR_QF 0x00100000 +#define RIO_IPWSR_TE 0x00000080 +#define RIO_IPWSR_QFI 0x00000010 +#define RIO_IPWSR_PWD 0x00000008 +#define RIO_IPWSR_PWB 0x00000004 + #define RIO_MSG_DESC_SIZE 32 #define RIO_MSG_BUFFER_SIZE 4096 #define RIO_MIN_TX_RING_SIZE 2 @@ -121,7 +153,7 @@ struct rio_msg_regs { u32 pad10[26]; u32 pwmr; u32 pwsr; - u32 pad11; + u32 epwqbar; u32 pwqbar; }; @@ -160,6 +192,14 @@ struct rio_msg_rx_ring { void *dev_id; }; +struct rio_port_write_msg { + void *virt; + dma_addr_t phys; + u32 msg_count; + u32 err_count; + u32 discard_count; +}; + struct rio_priv { struct device *dev; void __iomem *regs_win; @@ -172,11 +212,64 @@ struct rio_priv { struct rio_dbell_ring dbell_ring; struct rio_msg_tx_ring msg_tx_ring; struct rio_msg_rx_ring msg_rx_ring; + struct rio_port_write_msg port_write_msg; int bellirq; int txirq; int rxirq; + int pwirq; + struct work_struct pw_work; + struct kfifo pw_fifo; + spinlock_t pw_fifo_lock; }; +#define __fsl_read_rio_config(x, addr, err, op) \ + __asm__ __volatile__( \ + "1: "op" %1,0(%2)\n" \ + " eieio\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %1,-1\n" \ + " li %0,%3\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (err), "=r" (x) \ + : "b" (addr), "i" (-EFAULT), "0" (err)) + +static void __iomem *rio_regs_win; + +static int (*saved_mcheck_exception)(struct pt_regs *regs); + +static int fsl_rio_mcheck_exception(struct pt_regs *regs) +{ + const struct exception_table_entry *entry = NULL; + unsigned long reason = (mfspr(SPRN_MCSR) & MCSR_MASK); + + if (reason & MCSR_BUS_RBERR) { + reason = in_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR)); + if (reason & (RIO_LTLEDCSR_IER | RIO_LTLEDCSR_PRT)) { + /* Check if we are prepared to handle this fault */ + entry = search_exception_tables(regs->nip); + if (entry) { + pr_debug("RIO: %s - MC Exception handled\n", + __func__); + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), + 0); + regs->msr |= MSR_RI; + regs->nip = entry->fixup; + return 1; + } + } + } + + if (saved_mcheck_exception) + return saved_mcheck_exception(regs); + else + return cur_cpu_spec->machine_check(regs); +} + /** * fsl_rio_doorbell_send - Send a MPC85xx doorbell message * @mport: RapidIO master port info @@ -277,27 +370,44 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, { struct rio_priv *priv = mport->priv; u8 *data; + u32 rval, err = 0; pr_debug ("fsl_rio_config_read: index %d destid %d hopcount %d offset %8.8x len %d\n", index, destid, hopcount, offset, len); + + /* 16MB maintenance window possible */ + /* allow only aligned access to maintenance registers */ + if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) + return -EINVAL; + out_be32(&priv->maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + (destid << 22) | (hopcount << 12) | (offset >> 12)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); - data = (u8 *) priv->maint_win + offset; + data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { case 1: - *val = in_8((u8 *) data); + __fsl_read_rio_config(rval, data, err, "lbz"); break; case 2: - *val = in_be16((u16 *) data); + __fsl_read_rio_config(rval, data, err, "lhz"); break; - default: - *val = in_be32((u32 *) data); + case 4: + __fsl_read_rio_config(rval, data, err, "lwz"); break; + default: + return -EINVAL; } - return 0; + if (err) { + pr_debug("RIO: cfg_read error %d for %x:%x:%x\n", + err, destid, hopcount, offset); + } + + *val = rval; + + return err; } /** @@ -322,10 +432,17 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, pr_debug ("fsl_rio_config_write: index %d destid %d hopcount %d offset %8.8x len %d val %8.8x\n", index, destid, hopcount, offset, len, val); + + /* 16MB maintenance windows possible */ + /* allow only aligned access to maintenance registers */ + if (offset > (0x1000000 - len) || !IS_ALIGNED(offset, len)) + return -EINVAL; + out_be32(&priv->maint_atmu_regs->rowtar, - (destid << 22) | (hopcount << 12) | ((offset & ~0x3) >> 9)); + (destid << 22) | (hopcount << 12) | (offset >> 12)); + out_be32(&priv->maint_atmu_regs->rowtear, (destid >> 10)); - data = (u8 *) priv->maint_win + offset; + data = (u8 *) priv->maint_win + (offset & (RIO_MAINT_WIN_SIZE - 1)); switch (len) { case 1: out_8((u8 *) data, val); @@ -333,9 +450,11 @@ fsl_rio_config_write(struct rio_mport *mport, int index, u16 destid, case 2: out_be16((u16 *) data, val); break; - default: + case 4: out_be32((u32 *) data, val); break; + default: + return -EINVAL; } return 0; @@ -930,6 +1049,223 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) return rc; } +/** + * fsl_rio_port_write_handler - MPC85xx port write interrupt handler + * @irq: Linux interrupt number + * @dev_instance: Pointer to interrupt-specific data + * + * Handles port write interrupts. Parses a list of registered + * port write event handlers and executes a matching event handler. + */ +static irqreturn_t +fsl_rio_port_write_handler(int irq, void *dev_instance) +{ + u32 ipwmr, ipwsr; + struct rio_mport *port = (struct rio_mport *)dev_instance; + struct rio_priv *priv = port->priv; + u32 epwisr, tmp; + + ipwmr = in_be32(&priv->msg_regs->pwmr); + ipwsr = in_be32(&priv->msg_regs->pwsr); + + epwisr = in_be32(priv->regs_win + RIO_EPWISR); + if (epwisr & 0x80000000) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_info("RIO_LTLEDCSR = 0x%x\n", tmp); + out_be32(priv->regs_win + RIO_LTLEDCSR, 0); + } + + if (!(epwisr & 0x00000001)) + return IRQ_HANDLED; + +#ifdef DEBUG_PW + pr_debug("PW Int->IPWMR: 0x%08x IPWSR: 0x%08x (", ipwmr, ipwsr); + if (ipwsr & RIO_IPWSR_QF) + pr_debug(" QF"); + if (ipwsr & RIO_IPWSR_TE) + pr_debug(" TE"); + if (ipwsr & RIO_IPWSR_QFI) + pr_debug(" QFI"); + if (ipwsr & RIO_IPWSR_PWD) + pr_debug(" PWD"); + if (ipwsr & RIO_IPWSR_PWB) + pr_debug(" PWB"); + pr_debug(" )\n"); +#endif + out_be32(&priv->msg_regs->pwsr, + ipwsr & (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); + + if ((ipwmr & RIO_IPWMR_EIE) && (ipwsr & RIO_IPWSR_TE)) { + priv->port_write_msg.err_count++; + pr_info("RIO: Port-Write Transaction Err (%d)\n", + priv->port_write_msg.err_count); + } + if (ipwsr & RIO_IPWSR_PWD) { + priv->port_write_msg.discard_count++; + pr_info("RIO: Port Discarded Port-Write Msg(s) (%d)\n", + priv->port_write_msg.discard_count); + } + + /* Schedule deferred processing if PW was received */ + if (ipwsr & RIO_IPWSR_QFI) { + /* Save PW message (if there is room in FIFO), + * otherwise discard it. + */ + if (kfifo_avail(&priv->pw_fifo) >= RIO_PW_MSG_SIZE) { + priv->port_write_msg.msg_count++; + kfifo_in(&priv->pw_fifo, priv->port_write_msg.virt, + RIO_PW_MSG_SIZE); + } else { + priv->port_write_msg.discard_count++; + pr_info("RIO: ISR Discarded Port-Write Msg(s) (%d)\n", + priv->port_write_msg.discard_count); + } + schedule_work(&priv->pw_work); + } + + /* Issue Clear Queue command. This allows another + * port-write to be received. + */ + out_be32(&priv->msg_regs->pwmr, ipwmr | RIO_IPWMR_CQ); + + return IRQ_HANDLED; +} + +static void fsl_pw_dpc(struct work_struct *work) +{ + struct rio_priv *priv = container_of(work, struct rio_priv, pw_work); + unsigned long flags; + u32 msg_buffer[RIO_PW_MSG_SIZE/sizeof(u32)]; + + /* + * Process port-write messages + */ + spin_lock_irqsave(&priv->pw_fifo_lock, flags); + while (kfifo_out(&priv->pw_fifo, (unsigned char *)msg_buffer, + RIO_PW_MSG_SIZE)) { + /* Process one message */ + spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); +#ifdef DEBUG_PW + { + u32 i; + pr_debug("%s : Port-Write Message:", __func__); + for (i = 0; i < RIO_PW_MSG_SIZE/sizeof(u32); i++) { + if ((i%4) == 0) + pr_debug("\n0x%02x: 0x%08x", i*4, + msg_buffer[i]); + else + pr_debug(" 0x%08x", msg_buffer[i]); + } + pr_debug("\n"); + } +#endif + /* Pass the port-write message to RIO core for processing */ + rio_inb_pwrite_handler((union rio_pw_msg *)msg_buffer); + spin_lock_irqsave(&priv->pw_fifo_lock, flags); + } + spin_unlock_irqrestore(&priv->pw_fifo_lock, flags); +} + +/** + * fsl_rio_pw_enable - enable/disable port-write interface init + * @mport: Master port implementing the port write unit + * @enable: 1=enable; 0=disable port-write message handling + */ +static int fsl_rio_pw_enable(struct rio_mport *mport, int enable) +{ + struct rio_priv *priv = mport->priv; + u32 rval; + + rval = in_be32(&priv->msg_regs->pwmr); + + if (enable) + rval |= RIO_IPWMR_PWE; + else + rval &= ~RIO_IPWMR_PWE; + + out_be32(&priv->msg_regs->pwmr, rval); + + return 0; +} + +/** + * fsl_rio_port_write_init - MPC85xx port write interface init + * @mport: Master port implementing the port write unit + * + * Initializes port write unit hardware and DMA buffer + * ring. Called from fsl_rio_setup(). Returns %0 on success + * or %-ENOMEM on failure. + */ +static int fsl_rio_port_write_init(struct rio_mport *mport) +{ + struct rio_priv *priv = mport->priv; + int rc = 0; + + /* Following configurations require a disabled port write controller */ + out_be32(&priv->msg_regs->pwmr, + in_be32(&priv->msg_regs->pwmr) & ~RIO_IPWMR_PWE); + + /* Initialize port write */ + priv->port_write_msg.virt = dma_alloc_coherent(priv->dev, + RIO_PW_MSG_SIZE, + &priv->port_write_msg.phys, GFP_KERNEL); + if (!priv->port_write_msg.virt) { + pr_err("RIO: unable allocate port write queue\n"); + return -ENOMEM; + } + + priv->port_write_msg.err_count = 0; + priv->port_write_msg.discard_count = 0; + + /* Point dequeue/enqueue pointers at first entry */ + out_be32(&priv->msg_regs->epwqbar, 0); + out_be32(&priv->msg_regs->pwqbar, (u32) priv->port_write_msg.phys); + + pr_debug("EIPWQBAR: 0x%08x IPWQBAR: 0x%08x\n", + in_be32(&priv->msg_regs->epwqbar), + in_be32(&priv->msg_regs->pwqbar)); + + /* Clear interrupt status IPWSR */ + out_be32(&priv->msg_regs->pwsr, + (RIO_IPWSR_TE | RIO_IPWSR_QFI | RIO_IPWSR_PWD)); + + /* Configure port write contoller for snooping enable all reporting, + clear queue full */ + out_be32(&priv->msg_regs->pwmr, + RIO_IPWMR_SEN | RIO_IPWMR_QFIE | RIO_IPWMR_EIE | RIO_IPWMR_CQ); + + + /* Hook up port-write handler */ + rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0, + "port-write", (void *)mport); + if (rc < 0) { + pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); + goto err_out; + } + + INIT_WORK(&priv->pw_work, fsl_pw_dpc); + spin_lock_init(&priv->pw_fifo_lock); + if (kfifo_alloc(&priv->pw_fifo, RIO_PW_MSG_SIZE * 32, GFP_KERNEL)) { + pr_err("FIFO allocation failed\n"); + rc = -ENOMEM; + goto err_out_irq; + } + + pr_debug("IPWMR: 0x%08x IPWSR: 0x%08x\n", + in_be32(&priv->msg_regs->pwmr), + in_be32(&priv->msg_regs->pwsr)); + + return rc; + +err_out_irq: + free_irq(IRQ_RIO_PW(mport), (void *)mport); +err_out: + dma_free_coherent(priv->dev, RIO_PW_MSG_SIZE, + priv->port_write_msg.virt, + priv->port_write_msg.phys); + return rc; +} + static char *cmdline = NULL; static int fsl_rio_get_hdid(int index) @@ -1057,7 +1393,7 @@ int fsl_rio_setup(struct of_device *dev) dev_info(&dev->dev, "LAW start 0x%016llx, size 0x%016llx.\n", law_start, law_size); - ops = kmalloc(sizeof(struct rio_ops), GFP_KERNEL); + ops = kzalloc(sizeof(struct rio_ops), GFP_KERNEL); if (!ops) { rc = -ENOMEM; goto err_ops; @@ -1067,6 +1403,7 @@ int fsl_rio_setup(struct of_device *dev) ops->cread = fsl_rio_config_read; ops->cwrite = fsl_rio_config_write; ops->dsend = fsl_rio_doorbell_send; + ops->pwenable = fsl_rio_pw_enable; port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL); if (!port) { @@ -1089,11 +1426,12 @@ int fsl_rio_setup(struct of_device *dev) port->iores.flags = IORESOURCE_MEM; port->iores.name = "rio_io_win"; + priv->pwirq = irq_of_parse_and_map(dev->node, 0); priv->bellirq = irq_of_parse_and_map(dev->dev.of_node, 2); priv->txirq = irq_of_parse_and_map(dev->dev.of_node, 3); priv->rxirq = irq_of_parse_and_map(dev->dev.of_node, 4); - dev_info(&dev->dev, "bellirq: %d, txirq: %d, rxirq %d\n", priv->bellirq, - priv->txirq, priv->rxirq); + dev_info(&dev->dev, "pwirq: %d, bellirq: %d, txirq: %d, rxirq %d\n", + priv->pwirq, priv->bellirq, priv->txirq, priv->rxirq); rio_init_dbell_res(&port->riores[RIO_DOORBELL_RESOURCE], 0, 0xffff); rio_init_mbox_res(&port->riores[RIO_INB_MBOX_RESOURCE], 0, 0); @@ -1109,6 +1447,7 @@ int fsl_rio_setup(struct of_device *dev) rio_register_mport(port); priv->regs_win = ioremap(regs.start, regs.end - regs.start + 1); + rio_regs_win = priv->regs_win; /* Probe the master port phy type */ ccsr = in_be32(priv->regs_win + RIO_CCSR); @@ -1166,7 +1505,8 @@ int fsl_rio_setup(struct of_device *dev) /* Configure maintenance transaction window */ out_be32(&priv->maint_atmu_regs->rowbar, law_start >> 12); - out_be32(&priv->maint_atmu_regs->rowar, 0x80077015); /* 4M */ + out_be32(&priv->maint_atmu_regs->rowar, + 0x80077000 | (ilog2(RIO_MAINT_WIN_SIZE) - 1)); priv->maint_win = ioremap(law_start, RIO_MAINT_WIN_SIZE); @@ -1175,6 +1515,12 @@ int fsl_rio_setup(struct of_device *dev) (law_start + RIO_MAINT_WIN_SIZE) >> 12); out_be32(&priv->dbell_atmu_regs->rowar, 0x8004200b); /* 4k */ fsl_rio_doorbell_init(port); + fsl_rio_port_write_init(port); + + saved_mcheck_exception = ppc_md.machine_check_exception; + ppc_md.machine_check_exception = fsl_rio_mcheck_exception; + /* Ensure that RFXE is set */ + mtspr(SPRN_HID1, (mfspr(SPRN_HID1) | 0x20000)); return 0; err: diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 79d0ca08682..bee1c0f794c 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -102,6 +102,7 @@ config S390 select HAVE_KERNEL_GZIP select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO select ARCH_INLINE_SPIN_TRYLOCK select ARCH_INLINE_SPIN_TRYLOCK_BH select ARCH_INLINE_SPIN_LOCK @@ -479,13 +480,6 @@ config CMM Everybody who wants to run Linux under VM should select this option. -config CMM_PROC - bool "/proc interface to cooperative memory management" - depends on CMM - help - Select this option to enable the /proc interface to the - cooperative memory management. - config CMM_IUCV bool "IUCV special message interface to cooperative memory management" depends on CMM && (SMSGIUCV=y || CMM=SMSGIUCV) diff --git a/arch/s390/boot/compressed/Makefile b/arch/s390/boot/compressed/Makefile index 6e4a67ad07e..1c999f726a5 100644 --- a/arch/s390/boot/compressed/Makefile +++ b/arch/s390/boot/compressed/Makefile @@ -7,7 +7,7 @@ BITS := $(if $(CONFIG_64BIT),64,31) targets := vmlinux.lds vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 \ - vmlinux.bin.lzma misc.o piggy.o sizes.h head$(BITS).o + vmlinux.bin.lzma vmlinux.bin.lzo misc.o piggy.o sizes.h head$(BITS).o KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ $(LINUX_INCLUDE) -O2 KBUILD_CFLAGS += $(cflags-y) @@ -47,6 +47,7 @@ vmlinux.bin.all-y := $(obj)/vmlinux.bin suffix-$(CONFIG_KERNEL_GZIP) := gz suffix-$(CONFIG_KERNEL_BZIP2) := bz2 suffix-$(CONFIG_KERNEL_LZMA) := lzma +suffix-$(CONFIG_KERNEL_LZO) := lzo $(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) $(call if_changed,gzip) @@ -54,6 +55,8 @@ $(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) $(call if_changed,bzip2) $(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) $(call if_changed,lzma) +$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) + $(call if_changed,lzo) LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) diff --git a/arch/s390/boot/compressed/misc.c b/arch/s390/boot/compressed/misc.c index 14e0479d388..0851eb1e919 100644 --- a/arch/s390/boot/compressed/misc.c +++ b/arch/s390/boot/compressed/misc.c @@ -50,6 +50,10 @@ static unsigned long free_mem_end_ptr; #include "../../../../lib/decompress_unlzma.c" #endif +#ifdef CONFIG_KERNEL_LZO +#include "../../../../lib/decompress_unlzo.c" +#endif + extern _sclp_print_early(const char *); int puts(const char *s) diff --git a/arch/s390/include/asm/atomic.h b/arch/s390/include/asm/atomic.h index 451bfbb9db3..76daea11718 100644 --- a/arch/s390/include/asm/atomic.h +++ b/arch/s390/include/asm/atomic.h @@ -15,6 +15,7 @@ #include <linux/compiler.h> #include <linux/types.h> +#include <asm/system.h> #define ATOMIC_INIT(i) { (i) } @@ -274,6 +275,7 @@ static inline void atomic64_clear_mask(unsigned long long mask, atomic64_t *v) static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) { long long c, old; + c = atomic64_read(v); for (;;) { if (unlikely(c == u)) @@ -286,6 +288,23 @@ static inline int atomic64_add_unless(atomic64_t *v, long long a, long long u) return c != u; } +static inline long long atomic64_dec_if_positive(atomic64_t *v) +{ + long long c, old, dec; + + c = atomic64_read(v); + for (;;) { + dec = c - 1; + if (unlikely(dec < 0)) + break; + old = atomic64_cmpxchg((v), c, dec); + if (likely(old == c)) + break; + c = old; + } + return dec; +} + #define atomic64_add(_i, _v) atomic64_add_return(_i, _v) #define atomic64_add_negative(_i, _v) (atomic64_add_return(_i, _v) < 0) #define atomic64_inc(_v) atomic64_add_return(1, _v) diff --git a/arch/s390/include/asm/ccwdev.h b/arch/s390/include/asm/ccwdev.h index f4bd346a52d..1c0030f9b89 100644 --- a/arch/s390/include/asm/ccwdev.h +++ b/arch/s390/include/asm/ccwdev.h @@ -91,6 +91,14 @@ struct ccw_device { void (*handler) (struct ccw_device *, unsigned long, struct irb *); }; +/* + * Possible CIO actions triggered by the unit check handler. + */ +enum uc_todo { + UC_TODO_RETRY, + UC_TODO_RETRY_ON_NEW_PATH, + UC_TODO_STOP +}; /** * struct ccw driver - device driver for channel attached devices @@ -107,6 +115,7 @@ struct ccw_device { * @freeze: callback for freezing during hibernation snapshotting * @thaw: undo work done in @freeze * @restore: callback for restoring after hibernation + * @uc_handler: callback for unit check handler * @driver: embedded device driver structure * @name: device driver name */ @@ -124,6 +133,7 @@ struct ccw_driver { int (*freeze)(struct ccw_device *); int (*thaw) (struct ccw_device *); int (*restore)(struct ccw_device *); + enum uc_todo (*uc_handler) (struct ccw_device *, struct irb *); struct device_driver driver; char *name; }; diff --git a/arch/s390/include/asm/scatterlist.h b/arch/s390/include/asm/scatterlist.h index 35d786fe93a..be44d94cba5 100644 --- a/arch/s390/include/asm/scatterlist.h +++ b/arch/s390/include/asm/scatterlist.h @@ -1 +1,3 @@ +#define ISA_DMA_THRESHOLD (~0UL) + #include <asm-generic/scatterlist.h> diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index d9b490a2716..5232278d79a 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -132,8 +132,6 @@ int main(void) DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); DEFINE(__LC_FTRACE_FUNC, offsetof(struct _lowcore, ftrace_func)); - DEFINE(__LC_SIE_HOOK, offsetof(struct _lowcore, sie_hook)); - DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); DEFINE(__LC_IRB, offsetof(struct _lowcore, irb)); DEFINE(__LC_CPU_TIMER_SAVE_AREA, offsetof(struct _lowcore, cpu_timer_save_area)); DEFINE(__LC_CLOCK_COMP_SAVE_AREA, offsetof(struct _lowcore, clock_comp_save_area)); @@ -154,6 +152,8 @@ int main(void) DEFINE(__LC_FP_CREG_SAVE_AREA, offsetof(struct _lowcore, fpt_creg_save_area)); DEFINE(__LC_LAST_BREAK, offsetof(struct _lowcore, breaking_event_addr)); DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); + DEFINE(__LC_SIE_HOOK, offsetof(struct _lowcore, sie_hook)); + DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); #endif /* CONFIG_32BIT */ return 0; } diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 178d92536d9..e7192e1cb67 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -65,7 +65,7 @@ _TIF_SYSCALL = (_TIF_SYSCALL_TRACE>>8 | _TIF_SYSCALL_AUDIT>>8 | \ ltgr %r3,%r3 jz 0f basr %r14,%r3 - 0: +0: #endif .endm diff --git a/arch/s390/kernel/kprobes.c b/arch/s390/kernel/kprobes.c index 3d34eef5a2c..2a3d2bf6f08 100644 --- a/arch/s390/kernel/kprobes.c +++ b/arch/s390/kernel/kprobes.c @@ -63,6 +63,8 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction) case 0x0b: /* bsm */ case 0x83: /* diag */ case 0x44: /* ex */ + case 0xac: /* stnsm */ + case 0xad: /* stosm */ return -EINVAL; } switch (*(__u16 *) instruction) { @@ -72,6 +74,7 @@ int __kprobes is_prohibited_opcode(kprobe_opcode_t *instruction) case 0xb258: /* bsg */ case 0xb218: /* pc */ case 0xb228: /* pt */ + case 0xb98d: /* epsw */ return -EINVAL; } return 0; diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index 7d893248d26..c8e8e1354e1 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -401,7 +401,6 @@ setup_lowcore(void) lc->io_new_psw.mask = psw_kernel_bits; lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler; lc->clock_comparator = -1ULL; - lc->cmf_hpp = -1ULL; lc->kernel_stack = ((unsigned long) &init_thread_union) + THREAD_SIZE; lc->async_stack = (unsigned long) __alloc_bootmem(ASYNC_SIZE, ASYNC_SIZE, 0) + ASYNC_SIZE; @@ -418,6 +417,7 @@ setup_lowcore(void) __ctl_set_bit(14, 29); } #else + lc->cmf_hpp = -1ULL; lc->vdso_per_cpu_data = (unsigned long) &lc->paste[0]; #endif lc->sync_enter_timer = S390_lowcore.sync_enter_timer; diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index e4d98de83dd..541053ed234 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -944,21 +944,21 @@ static int __cpuinit smp_cpu_notify(struct notifier_block *self, struct cpu *c = &per_cpu(cpu_devices, cpu); struct sys_device *s = &c->sysdev; struct s390_idle_data *idle; + int err = 0; switch (action) { case CPU_ONLINE: case CPU_ONLINE_FROZEN: idle = &per_cpu(s390_idle, cpu); memset(idle, 0, sizeof(struct s390_idle_data)); - if (sysfs_create_group(&s->kobj, &cpu_online_attr_group)) - return NOTIFY_BAD; + err = sysfs_create_group(&s->kobj, &cpu_online_attr_group); break; case CPU_DEAD: case CPU_DEAD_FROZEN: sysfs_remove_group(&s->kobj, &cpu_online_attr_group); break; } - return NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __cpuinitdata smp_cpu_nb = { diff --git a/arch/s390/kvm/Kconfig b/arch/s390/kvm/Kconfig index 2f4b687cc7f..a7251580891 100644 --- a/arch/s390/kvm/Kconfig +++ b/arch/s390/kvm/Kconfig @@ -33,17 +33,6 @@ config KVM If unsure, say N. -config KVM_AWARE_CMF - depends on KVM - bool "KVM aware sampling" - ---help--- - This option enhances the sampling data from the CPU Measurement - Facility with additional information, that allows to distinguish - guest(s) and host when using the kernel based virtual machine - functionality. - - If unsure, say N. - # OK, it's a little counter-intuitive to do this, but it puts it neatly under # the virtualization menu. source drivers/vhost/Kconfig diff --git a/arch/s390/kvm/sie64a.S b/arch/s390/kvm/sie64a.S index 31646bd0e46..7e9d30d567b 100644 --- a/arch/s390/kvm/sie64a.S +++ b/arch/s390/kvm/sie64a.S @@ -32,12 +32,10 @@ SPI_PSW = STACK_FRAME_OVERHEAD + __PT_PSW .macro SPP newpp -#ifdef CONFIG_KVM_AWARE_CMF tm __LC_MACHINE_FLAGS+6,0x20 # MACHINE_FLAG_SPP jz 0f .insn s,0xb2800000,\newpp - 0: -#endif +0: .endm sie_irq_handler: diff --git a/arch/s390/mm/cmm.c b/arch/s390/mm/cmm.c index f87b34731e1..eb6a2ef5f82 100644 --- a/arch/s390/mm/cmm.c +++ b/arch/s390/mm/cmm.c @@ -1,11 +1,9 @@ /* - * arch/s390/mm/cmm.c + * Collaborative memory management interface. * - * S390 version - * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com) + * Copyright IBM Corp 2003,2010 + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, * - * Collaborative memory management interface. */ #include <linux/errno.h> @@ -20,9 +18,9 @@ #include <linux/kthread.h> #include <linux/oom.h> #include <linux/suspend.h> +#include <linux/uaccess.h> #include <asm/pgalloc.h> -#include <asm/uaccess.h> #include <asm/diag.h> static char *sender = "VMRMSVM"; @@ -53,14 +51,14 @@ static struct cmm_page_array *cmm_timed_page_list; static DEFINE_SPINLOCK(cmm_lock); static struct task_struct *cmm_thread_ptr; -static wait_queue_head_t cmm_thread_wait; -static struct timer_list cmm_timer; +static DECLARE_WAIT_QUEUE_HEAD(cmm_thread_wait); +static DEFINE_TIMER(cmm_timer, NULL, 0, 0); static void cmm_timer_fn(unsigned long); static void cmm_set_timer(void); -static long -cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list) +static long cmm_alloc_pages(long nr, long *counter, + struct cmm_page_array **list) { struct cmm_page_array *pa, *npa; unsigned long addr; @@ -99,8 +97,7 @@ cmm_alloc_pages(long nr, long *counter, struct cmm_page_array **list) return nr; } -static long -cmm_free_pages(long nr, long *counter, struct cmm_page_array **list) +static long cmm_free_pages(long nr, long *counter, struct cmm_page_array **list) { struct cmm_page_array *pa; unsigned long addr; @@ -140,11 +137,10 @@ static int cmm_oom_notify(struct notifier_block *self, } static struct notifier_block cmm_oom_nb = { - .notifier_call = cmm_oom_notify + .notifier_call = cmm_oom_notify, }; -static int -cmm_thread(void *dummy) +static int cmm_thread(void *dummy) { int rc; @@ -170,7 +166,7 @@ cmm_thread(void *dummy) cmm_timed_pages_target = cmm_timed_pages; } else if (cmm_timed_pages_target < cmm_timed_pages) { cmm_free_pages(1, &cmm_timed_pages, - &cmm_timed_page_list); + &cmm_timed_page_list); } if (cmm_timed_pages > 0 && !timer_pending(&cmm_timer)) cmm_set_timer(); @@ -178,14 +174,12 @@ cmm_thread(void *dummy) return 0; } -static void -cmm_kick_thread(void) +static void cmm_kick_thread(void) { wake_up(&cmm_thread_wait); } -static void -cmm_set_timer(void) +static void cmm_set_timer(void) { if (cmm_timed_pages_target <= 0 || cmm_timeout_seconds <= 0) { if (timer_pending(&cmm_timer)) @@ -202,8 +196,7 @@ cmm_set_timer(void) add_timer(&cmm_timer); } -static void -cmm_timer_fn(unsigned long ignored) +static void cmm_timer_fn(unsigned long ignored) { long nr; @@ -216,57 +209,49 @@ cmm_timer_fn(unsigned long ignored) cmm_set_timer(); } -void -cmm_set_pages(long nr) +static void cmm_set_pages(long nr) { cmm_pages_target = nr; cmm_kick_thread(); } -long -cmm_get_pages(void) +static long cmm_get_pages(void) { return cmm_pages; } -void -cmm_add_timed_pages(long nr) +static void cmm_add_timed_pages(long nr) { cmm_timed_pages_target += nr; cmm_kick_thread(); } -long -cmm_get_timed_pages(void) +static long cmm_get_timed_pages(void) { return cmm_timed_pages; } -void -cmm_set_timeout(long nr, long seconds) +static void cmm_set_timeout(long nr, long seconds) { cmm_timeout_pages = nr; cmm_timeout_seconds = seconds; cmm_set_timer(); } -static int -cmm_skip_blanks(char *cp, char **endp) +static int cmm_skip_blanks(char *cp, char **endp) { char *str; - for (str = cp; *str == ' ' || *str == '\t'; str++); + for (str = cp; *str == ' ' || *str == '\t'; str++) + ; *endp = str; return str != cp; } -#ifdef CONFIG_CMM_PROC - static struct ctl_table cmm_table[]; -static int -cmm_pages_handler(ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int cmm_pages_handler(ctl_table *ctl, int write, void __user *buffer, + size_t *lenp, loff_t *ppos) { char buf[16], *p; long nr; @@ -305,9 +290,8 @@ cmm_pages_handler(ctl_table *ctl, int write, return 0; } -static int -cmm_timeout_handler(ctl_table *ctl, int write, - void __user *buffer, size_t *lenp, loff_t *ppos) +static int cmm_timeout_handler(ctl_table *ctl, int write, void __user *buffer, + size_t *lenp, loff_t *ppos) { char buf[64], *p; long nr, seconds; @@ -370,12 +354,10 @@ static struct ctl_table cmm_dir_table[] = { }, { } }; -#endif #ifdef CONFIG_CMM_IUCV #define SMSG_PREFIX "CMM" -static void -cmm_smsg_target(const char *from, char *msg) +static void cmm_smsg_target(const char *from, char *msg) { long nr, seconds; @@ -445,16 +427,13 @@ static struct notifier_block cmm_power_notifier = { .notifier_call = cmm_power_event, }; -static int -cmm_init (void) +static int cmm_init(void) { int rc = -ENOMEM; -#ifdef CONFIG_CMM_PROC cmm_sysctl_header = register_sysctl_table(cmm_dir_table); if (!cmm_sysctl_header) goto out_sysctl; -#endif #ifdef CONFIG_CMM_IUCV rc = smsg_register_callback(SMSG_PREFIX, cmm_smsg_target); if (rc < 0) @@ -466,8 +445,6 @@ cmm_init (void) rc = register_pm_notifier(&cmm_power_notifier); if (rc) goto out_pm; - init_waitqueue_head(&cmm_thread_wait); - init_timer(&cmm_timer); cmm_thread_ptr = kthread_run(cmm_thread, NULL, "cmmthread"); rc = IS_ERR(cmm_thread_ptr) ? PTR_ERR(cmm_thread_ptr) : 0; if (rc) @@ -483,36 +460,26 @@ out_oom_notify: smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target); out_smsg: #endif -#ifdef CONFIG_CMM_PROC unregister_sysctl_table(cmm_sysctl_header); out_sysctl: -#endif + del_timer_sync(&cmm_timer); return rc; } +module_init(cmm_init); -static void -cmm_exit(void) +static void cmm_exit(void) { - kthread_stop(cmm_thread_ptr); - unregister_pm_notifier(&cmm_power_notifier); - unregister_oom_notifier(&cmm_oom_nb); - cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list); - cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list); -#ifdef CONFIG_CMM_PROC unregister_sysctl_table(cmm_sysctl_header); -#endif #ifdef CONFIG_CMM_IUCV smsg_unregister_callback(SMSG_PREFIX, cmm_smsg_target); #endif + unregister_pm_notifier(&cmm_power_notifier); + unregister_oom_notifier(&cmm_oom_nb); + kthread_stop(cmm_thread_ptr); + del_timer_sync(&cmm_timer); + cmm_free_pages(cmm_pages, &cmm_pages, &cmm_page_list); + cmm_free_pages(cmm_timed_pages, &cmm_timed_pages, &cmm_timed_page_list); } - -module_init(cmm_init); module_exit(cmm_exit); -EXPORT_SYMBOL(cmm_set_pages); -EXPORT_SYMBOL(cmm_get_pages); -EXPORT_SYMBOL(cmm_add_timed_pages); -EXPORT_SYMBOL(cmm_get_timed_pages); -EXPORT_SYMBOL(cmm_set_timeout); - MODULE_LICENSE("GPL"); diff --git a/arch/score/include/asm/scatterlist.h b/arch/score/include/asm/scatterlist.h index 9f533b8362c..4fa1a665821 100644 --- a/arch/score/include/asm/scatterlist.h +++ b/arch/score/include/asm/scatterlist.h @@ -1,6 +1,8 @@ #ifndef _ASM_SCORE_SCATTERLIST_H #define _ASM_SCORE_SCATTERLIST_H +#define ISA_DMA_THRESHOLD (~0UL) + #include <asm-generic/scatterlist.h> #endif /* _ASM_SCORE_SCATTERLIST_H */ diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 0e318c905ee..c5ee4ce60b5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -186,6 +186,9 @@ config DMA_NONCOHERENT config NEED_DMA_MAP_STATE def_bool DMA_NONCOHERENT +config NEED_SG_DMA_LENGTH + def_bool y + source "init/Kconfig" source "kernel/Kconfig.freezer" diff --git a/arch/sh/kernel/ptrace_32.c b/arch/sh/kernel/ptrace_32.c index d4104ce9fe5..6c4bbba2a67 100644 --- a/arch/sh/kernel/ptrace_32.c +++ b/arch/sh/kernel/ptrace_32.c @@ -436,29 +436,6 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data) 0, sizeof(struct pt_dspregs), (const void __user *)data); #endif -#ifdef CONFIG_BINFMT_ELF_FDPIC - case PTRACE_GETFDPIC: { - unsigned long tmp = 0; - - switch (addr) { - case PTRACE_GETFDPIC_EXEC: - tmp = child->mm->context.exec_fdpic_loadmap; - break; - case PTRACE_GETFDPIC_INTERP: - tmp = child->mm->context.interp_fdpic_loadmap; - break; - default: - break; - } - - ret = 0; - if (put_user(tmp, datap)) { - ret = -EFAULT; - break; - } - break; - } -#endif default: ret = ptrace_request(child, request, addr, data); break; diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index d6781ce687e..6f1470baa31 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -133,6 +133,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA bool default y if SPARC32 diff --git a/arch/sparc/include/asm/scatterlist.h b/arch/sparc/include/asm/scatterlist.h index d1120257b03..433e45f05fd 100644 --- a/arch/sparc/include/asm/scatterlist.h +++ b/arch/sparc/include/asm/scatterlist.h @@ -1,8 +1,9 @@ #ifndef _SPARC_SCATTERLIST_H #define _SPARC_SCATTERLIST_H -#define sg_dma_len(sg) ((sg)->dma_length) - #include <asm-generic/scatterlist.h> +#define ISA_DMA_THRESHOLD (~0UL) +#define ARCH_HAS_SG_CHAIN + #endif /* !(_SPARC_SCATTERLIST_H) */ diff --git a/arch/sparc/kernel/perf_event.c b/arch/sparc/kernel/perf_event.c index 34ce49f80ea..0ec92c8861d 100644 --- a/arch/sparc/kernel/perf_event.c +++ b/arch/sparc/kernel/perf_event.c @@ -92,6 +92,8 @@ struct cpu_hw_events { /* Enabled/disable state. */ int enabled; + + unsigned int group_flag; }; DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { .enabled = 1, }; @@ -981,53 +983,6 @@ static int collect_events(struct perf_event *group, int max_count, return n; } -static void event_sched_in(struct perf_event *event) -{ - event->state = PERF_EVENT_STATE_ACTIVE; - event->oncpu = smp_processor_id(); - event->tstamp_running += event->ctx->time - event->tstamp_stopped; - if (is_software_event(event)) - event->pmu->enable(event); -} - -int hw_perf_group_sched_in(struct perf_event *group_leader, - struct perf_cpu_context *cpuctx, - struct perf_event_context *ctx) -{ - struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); - struct perf_event *sub; - int n0, n; - - if (!sparc_pmu) - return 0; - - n0 = cpuc->n_events; - n = collect_events(group_leader, perf_max_events - n0, - &cpuc->event[n0], &cpuc->events[n0], - &cpuc->current_idx[n0]); - if (n < 0) - return -EAGAIN; - if (check_excludes(cpuc->event, n0, n)) - return -EINVAL; - if (sparc_check_constraints(cpuc->event, cpuc->events, n + n0)) - return -EAGAIN; - cpuc->n_events = n0 + n; - cpuc->n_added += n; - - cpuctx->active_oncpu += n; - n = 1; - event_sched_in(group_leader); - list_for_each_entry(sub, &group_leader->sibling_list, group_entry) { - if (sub->state != PERF_EVENT_STATE_OFF) { - event_sched_in(sub); - n++; - } - } - ctx->nr_active += n; - - return 1; -} - static int sparc_pmu_enable(struct perf_event *event) { struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); @@ -1045,11 +1000,20 @@ static int sparc_pmu_enable(struct perf_event *event) cpuc->events[n0] = event->hw.event_base; cpuc->current_idx[n0] = PIC_NO_INDEX; + /* + * If group events scheduling transaction was started, + * skip the schedulability test here, it will be peformed + * at commit time(->commit_txn) as a whole + */ + if (cpuc->group_flag & PERF_EVENT_TXN_STARTED) + goto nocheck; + if (check_excludes(cpuc->event, n0, 1)) goto out; if (sparc_check_constraints(cpuc->event, cpuc->events, n0 + 1)) goto out; +nocheck: cpuc->n_events++; cpuc->n_added++; @@ -1129,11 +1093,61 @@ static int __hw_perf_event_init(struct perf_event *event) return 0; } +/* + * Start group events scheduling transaction + * Set the flag to make pmu::enable() not perform the + * schedulability test, it will be performed at commit time + */ +static void sparc_pmu_start_txn(const struct pmu *pmu) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + cpuhw->group_flag |= PERF_EVENT_TXN_STARTED; +} + +/* + * Stop group events scheduling transaction + * Clear the flag and pmu::enable() will perform the + * schedulability test. + */ +static void sparc_pmu_cancel_txn(const struct pmu *pmu) +{ + struct cpu_hw_events *cpuhw = &__get_cpu_var(cpu_hw_events); + + cpuhw->group_flag &= ~PERF_EVENT_TXN_STARTED; +} + +/* + * Commit group events scheduling transaction + * Perform the group schedulability test as a whole + * Return 0 if success + */ +static int sparc_pmu_commit_txn(const struct pmu *pmu) +{ + struct cpu_hw_events *cpuc = &__get_cpu_var(cpu_hw_events); + int n; + + if (!sparc_pmu) + return -EINVAL; + + cpuc = &__get_cpu_var(cpu_hw_events); + n = cpuc->n_events; + if (check_excludes(cpuc->event, 0, n)) + return -EINVAL; + if (sparc_check_constraints(cpuc->event, cpuc->events, n)) + return -EAGAIN; + + return 0; +} + static const struct pmu pmu = { .enable = sparc_pmu_enable, .disable = sparc_pmu_disable, .read = sparc_pmu_read, .unthrottle = sparc_pmu_unthrottle, + .start_txn = sparc_pmu_start_txn, + .cancel_txn = sparc_pmu_cancel_txn, + .commit_txn = sparc_pmu_commit_txn, }; const struct pmu *hw_perf_event_init(struct perf_event *event) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index e0c619c55b4..dcb0593b4a6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -109,6 +109,9 @@ config SBUS config NEED_DMA_MAP_STATE def_bool (X86_64 || DMAR || DMA_API_DEBUG) +config NEED_SG_DMA_LENGTH + def_bool y + config GENERIC_ISA_DMA def_bool y @@ -1703,6 +1706,10 @@ config HAVE_ARCH_EARLY_PFN_TO_NID def_bool X86_64 depends on NUMA +config USE_PERCPU_NUMA_NODE_ID + def_bool X86_64 + depends on NUMA + menu "Power management and ACPI options" config ARCH_HIBERNATION_HEADER diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h index 56f462cf22d..aa2c39d968f 100644 --- a/arch/x86/include/asm/acpi.h +++ b/arch/x86/include/asm/acpi.h @@ -85,7 +85,6 @@ extern int acpi_ioapic; extern int acpi_noirq; extern int acpi_strict; extern int acpi_disabled; -extern int acpi_ht; extern int acpi_pci_disabled; extern int acpi_skip_timer_override; extern int acpi_use_timer_override; @@ -97,7 +96,6 @@ void acpi_pic_sci_set_trigger(unsigned int, u16); static inline void disable_acpi(void) { acpi_disabled = 1; - acpi_ht = 0; acpi_pci_disabled = 1; acpi_noirq = 1; } diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index dca9c545f44..46814591438 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -332,6 +332,7 @@ static __always_inline __pure bool __static_cpu_has(u8 bit) #endif } +#if __GNUC__ >= 4 #define static_cpu_has(bit) \ ( \ __builtin_constant_p(boot_cpu_has(bit)) ? \ @@ -340,6 +341,12 @@ static __always_inline __pure bool __static_cpu_has(u8 bit) __static_cpu_has(bit) : \ boot_cpu_has(bit) \ ) +#else +/* + * gcc 3.x is too stupid to do the static test; fall back to dynamic. + */ +#define static_cpu_has(bit) boot_cpu_has(bit) +#endif #endif /* defined(__KERNEL__) && !defined(__ASSEMBLY__) */ diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h index 6c3fdd631ed..f32a4301c4d 100644 --- a/arch/x86/include/asm/mce.h +++ b/arch/x86/include/asm/mce.h @@ -225,5 +225,13 @@ extern void mcheck_intel_therm_init(void); static inline void mcheck_intel_therm_init(void) { } #endif +/* + * Used by APEI to report memory error via /dev/mcelog + */ + +struct cper_sec_mem_err; +extern void apei_mce_report_mem_error(int corrected, + struct cper_sec_mem_err *mem_err); + #endif /* __KERNEL__ */ #endif /* _ASM_X86_MCE_H */ diff --git a/arch/x86/include/asm/perf_event_p4.h b/arch/x86/include/asm/perf_event_p4.h index b05400a542f..64a8ebff06f 100644 --- a/arch/x86/include/asm/perf_event_p4.h +++ b/arch/x86/include/asm/perf_event_p4.h @@ -89,7 +89,8 @@ P4_CCCR_ENABLE) /* HT mask */ -#define P4_CCCR_MASK_HT (P4_CCCR_MASK | P4_CCCR_THREAD_ANY) +#define P4_CCCR_MASK_HT \ + (P4_CCCR_MASK | P4_CCCR_OVF_PMI_T1 | P4_CCCR_THREAD_ANY) #define P4_GEN_ESCR_EMASK(class, name, bit) \ class##__##name = ((1 << bit) << P4_ESCR_EVENTMASK_SHIFT) diff --git a/arch/x86/include/asm/rdc321x_defs.h b/arch/x86/include/asm/rdc321x_defs.h deleted file mode 100644 index c8e9c8bed3d..00000000000 --- a/arch/x86/include/asm/rdc321x_defs.h +++ /dev/null @@ -1,12 +0,0 @@ -#define PFX "rdc321x: " - -/* General purpose configuration and data registers */ -#define RDC3210_CFGREG_ADDR 0x0CF8 -#define RDC3210_CFGREG_DATA 0x0CFC - -#define RDC321X_GPIO_CTRL_REG1 0x48 -#define RDC321X_GPIO_CTRL_REG2 0x84 -#define RDC321X_GPIO_DATA_REG1 0x4c -#define RDC321X_GPIO_DATA_REG2 0x88 - -#define RDC321X_MAX_GPIO 58 diff --git a/arch/x86/include/asm/scatterlist.h b/arch/x86/include/asm/scatterlist.h index 75af592677e..fb0b1874396 100644 --- a/arch/x86/include/asm/scatterlist.h +++ b/arch/x86/include/asm/scatterlist.h @@ -1,8 +1,9 @@ #ifndef _ASM_X86_SCATTERLIST_H #define _ASM_X86_SCATTERLIST_H -#define ISA_DMA_THRESHOLD (0x00ffffff) - #include <asm-generic/scatterlist.h> +#define ISA_DMA_THRESHOLD (0x00ffffff) +#define ARCH_HAS_SG_CHAIN + #endif /* _ASM_X86_SCATTERLIST_H */ diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 62ba9400cc4..f0b6e5dbc5a 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -239,8 +239,8 @@ static inline struct thread_info *current_thread_info(void) #define TS_USEDFPU 0x0001 /* FPU was used by this task this quantum (SMP) */ #define TS_COMPAT 0x0002 /* 32bit syscall active (64BIT)*/ -#define TS_POLLING 0x0004 /* true if in idle loop - and not sleeping */ +#define TS_POLLING 0x0004 /* idle task polling need_resched, + skip sending interrupt */ #define TS_RESTORE_SIGMASK 0x0008 /* restore signal mask in do_signal() */ #define tsk_is_polling(t) (task_thread_info(t)->status & TS_POLLING) diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index c5087d79658..21899cc31e5 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -53,33 +53,29 @@ extern int cpu_to_node_map[]; /* Returns the number of the node containing CPU 'cpu' */ -static inline int cpu_to_node(int cpu) +static inline int __cpu_to_node(int cpu) { return cpu_to_node_map[cpu]; } -#define early_cpu_to_node(cpu) cpu_to_node(cpu) +#define early_cpu_to_node __cpu_to_node +#define cpu_to_node __cpu_to_node #else /* CONFIG_X86_64 */ /* Mappings between logical cpu number and node number */ DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); -/* Returns the number of the current Node. */ -DECLARE_PER_CPU(int, node_number); -#define numa_node_id() percpu_read(node_number) - #ifdef CONFIG_DEBUG_PER_CPU_MAPS -extern int cpu_to_node(int cpu); +/* + * override generic percpu implementation of cpu_to_node + */ +extern int __cpu_to_node(int cpu); +#define cpu_to_node __cpu_to_node + extern int early_cpu_to_node(int cpu); #else /* !CONFIG_DEBUG_PER_CPU_MAPS */ -/* Returns the number of the node containing CPU 'cpu' */ -static inline int cpu_to_node(int cpu) -{ - return per_cpu(x86_cpu_to_node_map, cpu); -} - /* Same function but used if called before per_cpu areas are setup */ static inline int early_cpu_to_node(int cpu) { @@ -170,6 +166,10 @@ static inline int numa_node_id(void) { return 0; } +/* + * indicate override: + */ +#define numa_node_id numa_node_id static inline int early_cpu_to_node(int cpu) { diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 488be461a38..60cc4058ed5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -63,7 +63,6 @@ EXPORT_SYMBOL(acpi_disabled); int acpi_noirq; /* skip ACPI IRQ initialization */ int acpi_pci_disabled; /* skip ACPI PCI scan and IRQ initialization */ EXPORT_SYMBOL(acpi_pci_disabled); -int acpi_ht __initdata = 1; /* enable HT */ int acpi_lapic; int acpi_ioapic; @@ -1501,9 +1500,8 @@ void __init acpi_boot_table_init(void) /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) + if (acpi_disabled) return; /* @@ -1534,9 +1532,8 @@ int __init early_acpi_boot_init(void) { /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) + if (acpi_disabled) return 1; /* @@ -1554,9 +1551,8 @@ int __init acpi_boot_init(void) /* * If acpi_disabled, bail out - * One exception: acpi=ht continues far enough to enumerate LAPICs */ - if (acpi_disabled && !acpi_ht) + if (acpi_disabled) return 1; acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf); @@ -1591,21 +1587,12 @@ static int __init parse_acpi(char *arg) /* acpi=force to over-ride black-list */ else if (strcmp(arg, "force") == 0) { acpi_force = 1; - acpi_ht = 1; acpi_disabled = 0; } /* acpi=strict disables out-of-spec workarounds */ else if (strcmp(arg, "strict") == 0) { acpi_strict = 1; } - /* Limit ACPI just to boot-time to enable HT */ - else if (strcmp(arg, "ht") == 0) { - if (!acpi_force) { - printk(KERN_WARNING "acpi=ht will be removed in Linux-2.6.35\n"); - disable_acpi(); - } - acpi_ht = 1; - } /* acpi=rsdt use RSDT instead of XSDT */ else if (strcmp(arg, "rsdt") == 0) { acpi_rsdt_forced = 1; diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index f9961034e55..82e508677b9 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -162,8 +162,6 @@ static int __init acpi_sleep_setup(char *str) #endif if (strncmp(str, "old_ordering", 12) == 0) acpi_old_suspend_ordering(); - if (strncmp(str, "sci_force_enable", 16) == 0) - acpi_set_sci_en_on_resume(); str = strchr(str, ','); if (str != NULL) str += strspn(str, ", \t"); diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index e5a4a1e0161..c02cc692985 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -51,6 +51,7 @@ #include <asm/smp.h> #include <asm/mce.h> #include <asm/kvm_para.h> +#include <asm/tsc.h> unsigned int num_processors; @@ -1151,8 +1152,13 @@ static void __cpuinit lapic_setup_esr(void) */ void __cpuinit setup_local_APIC(void) { - unsigned int value; - int i, j; + unsigned int value, queued; + int i, j, acked = 0; + unsigned long long tsc = 0, ntsc; + long long max_loops = cpu_khz; + + if (cpu_has_tsc) + rdtscll(tsc); if (disable_apic) { arch_disable_smp_support(); @@ -1204,13 +1210,32 @@ void __cpuinit setup_local_APIC(void) * the interrupt. Hence a vector might get locked. It was noticed * for timer irq (vector 0x31). Issue an extra EOI to clear ISR. */ - for (i = APIC_ISR_NR - 1; i >= 0; i--) { - value = apic_read(APIC_ISR + i*0x10); - for (j = 31; j >= 0; j--) { - if (value & (1<<j)) - ack_APIC_irq(); + do { + queued = 0; + for (i = APIC_ISR_NR - 1; i >= 0; i--) + queued |= apic_read(APIC_IRR + i*0x10); + + for (i = APIC_ISR_NR - 1; i >= 0; i--) { + value = apic_read(APIC_ISR + i*0x10); + for (j = 31; j >= 0; j--) { + if (value & (1<<j)) { + ack_APIC_irq(); + acked++; + } + } } - } + if (acked > 256) { + printk(KERN_ERR "LAPIC pending interrupts after %d EOI\n", + acked); + break; + } + if (cpu_has_tsc) { + rdtscll(ntsc); + max_loops = (cpu_khz << 10) - (ntsc - tsc); + } else + max_loops--; + } while (queued && max_loops > 0); + WARN_ON(max_loops <= 0); /* * Now that we are all set up, enable the APIC diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index cc83a002786..68e4a6f2211 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1121,9 +1121,9 @@ void __cpuinit cpu_init(void) oist = &per_cpu(orig_ist, cpu); #ifdef CONFIG_NUMA - if (cpu != 0 && percpu_read(node_number) == 0 && - cpu_to_node(cpu) != NUMA_NO_NODE) - percpu_write(node_number, cpu_to_node(cpu)); + if (cpu != 0 && percpu_read(numa_node) == 0 && + early_cpu_to_node(cpu) != NUMA_NO_NODE) + set_numa_node(early_cpu_to_node(cpu)); #endif me = current; diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 6f3dc8fbbfd..7ec2123838e 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1497,8 +1497,8 @@ static struct cpufreq_driver cpufreq_amd64_driver = { * simply keep the boost-disable flag in sync with the current global * state. */ -static int __cpuinit cpb_notify(struct notifier_block *nb, unsigned long action, - void *hcpu) +static int cpb_notify(struct notifier_block *nb, unsigned long action, + void *hcpu) { unsigned cpu = (long)hcpu; u32 lo, hi; @@ -1528,7 +1528,7 @@ static int __cpuinit cpb_notify(struct notifier_block *nb, unsigned long action, return NOTIFY_OK; } -static struct notifier_block __cpuinitdata cpb_nb = { +static struct notifier_block cpb_nb = { .notifier_call = cpb_notify, }; diff --git a/arch/x86/kernel/cpu/mcheck/Makefile b/arch/x86/kernel/cpu/mcheck/Makefile index 4ac6d48fe11..bb34b03af25 100644 --- a/arch/x86/kernel/cpu/mcheck/Makefile +++ b/arch/x86/kernel/cpu/mcheck/Makefile @@ -7,3 +7,5 @@ obj-$(CONFIG_X86_MCE_THRESHOLD) += threshold.o obj-$(CONFIG_X86_MCE_INJECT) += mce-inject.o obj-$(CONFIG_X86_THERMAL_VECTOR) += therm_throt.o + +obj-$(CONFIG_ACPI_APEI) += mce-apei.o diff --git a/arch/x86/kernel/cpu/mcheck/mce-apei.c b/arch/x86/kernel/cpu/mcheck/mce-apei.c new file mode 100644 index 00000000000..745b54f9be8 --- /dev/null +++ b/arch/x86/kernel/cpu/mcheck/mce-apei.c @@ -0,0 +1,138 @@ +/* + * Bridge between MCE and APEI + * + * On some machine, corrected memory errors are reported via APEI + * generic hardware error source (GHES) instead of corrected Machine + * Check. These corrected memory errors can be reported to user space + * through /dev/mcelog via faking a corrected Machine Check, so that + * the error memory page can be offlined by /sbin/mcelog if the error + * count for one page is beyond the threshold. + * + * For fatal MCE, save MCE record into persistent storage via ERST, so + * that the MCE record can be logged after reboot via ERST. + * + * Copyright 2010 Intel Corp. + * Author: Huang Ying <ying.huang@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/acpi.h> +#include <linux/cper.h> +#include <acpi/apei.h> +#include <asm/mce.h> + +#include "mce-internal.h" + +void apei_mce_report_mem_error(int corrected, struct cper_sec_mem_err *mem_err) +{ + struct mce m; + + /* Only corrected MC is reported */ + if (!corrected) + return; + + mce_setup(&m); + m.bank = 1; + /* Fake a memory read corrected error with unknown channel */ + m.status = MCI_STATUS_VAL | MCI_STATUS_EN | MCI_STATUS_ADDRV | 0x9f; + m.addr = mem_err->physical_addr; + mce_log(&m); + mce_notify_irq(); +} +EXPORT_SYMBOL_GPL(apei_mce_report_mem_error); + +#define CPER_CREATOR_MCE \ + UUID_LE(0x75a574e3, 0x5052, 0x4b29, 0x8a, 0x8e, 0xbe, 0x2c, \ + 0x64, 0x90, 0xb8, 0x9d) +#define CPER_SECTION_TYPE_MCE \ + UUID_LE(0xfe08ffbe, 0x95e4, 0x4be7, 0xbc, 0x73, 0x40, 0x96, \ + 0x04, 0x4a, 0x38, 0xfc) + +/* + * CPER specification (in UEFI specification 2.3 appendix N) requires + * byte-packed. + */ +struct cper_mce_record { + struct cper_record_header hdr; + struct cper_section_descriptor sec_hdr; + struct mce mce; +} __packed; + +int apei_write_mce(struct mce *m) +{ + struct cper_mce_record rcd; + + memset(&rcd, 0, sizeof(rcd)); + memcpy(rcd.hdr.signature, CPER_SIG_RECORD, CPER_SIG_SIZE); + rcd.hdr.revision = CPER_RECORD_REV; + rcd.hdr.signature_end = CPER_SIG_END; + rcd.hdr.section_count = 1; + rcd.hdr.error_severity = CPER_SER_FATAL; + /* timestamp, platform_id, partition_id are all invalid */ + rcd.hdr.validation_bits = 0; + rcd.hdr.record_length = sizeof(rcd); + rcd.hdr.creator_id = CPER_CREATOR_MCE; + rcd.hdr.notification_type = CPER_NOTIFY_MCE; + rcd.hdr.record_id = cper_next_record_id(); + rcd.hdr.flags = CPER_HW_ERROR_FLAGS_PREVERR; + + rcd.sec_hdr.section_offset = (void *)&rcd.mce - (void *)&rcd; + rcd.sec_hdr.section_length = sizeof(rcd.mce); + rcd.sec_hdr.revision = CPER_SEC_REV; + /* fru_id and fru_text is invalid */ + rcd.sec_hdr.validation_bits = 0; + rcd.sec_hdr.flags = CPER_SEC_PRIMARY; + rcd.sec_hdr.section_type = CPER_SECTION_TYPE_MCE; + rcd.sec_hdr.section_severity = CPER_SER_FATAL; + + memcpy(&rcd.mce, m, sizeof(*m)); + + return erst_write(&rcd.hdr); +} + +ssize_t apei_read_mce(struct mce *m, u64 *record_id) +{ + struct cper_mce_record rcd; + ssize_t len; + + len = erst_read_next(&rcd.hdr, sizeof(rcd)); + if (len <= 0) + return len; + /* Can not skip other records in storage via ERST unless clear them */ + else if (len != sizeof(rcd) || + uuid_le_cmp(rcd.hdr.creator_id, CPER_CREATOR_MCE)) { + if (printk_ratelimit()) + pr_warning( + "MCE-APEI: Can not skip the unknown record in ERST"); + return -EIO; + } + + memcpy(m, &rcd.mce, sizeof(*m)); + *record_id = rcd.hdr.record_id; + + return sizeof(*m); +} + +/* Check whether there is record in ERST */ +int apei_check_mce(void) +{ + return erst_get_record_count(); +} + +int apei_clear_mce(u64 record_id) +{ + return erst_clear(record_id); +} diff --git a/arch/x86/kernel/cpu/mcheck/mce-internal.h b/arch/x86/kernel/cpu/mcheck/mce-internal.h index 32996f9fab6..fefcc69ee8b 100644 --- a/arch/x86/kernel/cpu/mcheck/mce-internal.h +++ b/arch/x86/kernel/cpu/mcheck/mce-internal.h @@ -28,3 +28,26 @@ extern int mce_ser; extern struct mce_bank *mce_banks; +#ifdef CONFIG_ACPI_APEI +int apei_write_mce(struct mce *m); +ssize_t apei_read_mce(struct mce *m, u64 *record_id); +int apei_check_mce(void); +int apei_clear_mce(u64 record_id); +#else +static inline int apei_write_mce(struct mce *m) +{ + return -EINVAL; +} +static inline ssize_t apei_read_mce(struct mce *m, u64 *record_id) +{ + return 0; +} +static inline int apei_check_mce(void) +{ + return 0; +} +static inline int apei_clear_mce(u64 record_id) +{ + return -EINVAL; +} +#endif diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c index 7a355ddcc64..707165dbc20 100644 --- a/arch/x86/kernel/cpu/mcheck/mce.c +++ b/arch/x86/kernel/cpu/mcheck/mce.c @@ -264,7 +264,7 @@ static void wait_for_panic(void) static void mce_panic(char *msg, struct mce *final, char *exp) { - int i; + int i, apei_err = 0; if (!fake_panic) { /* @@ -287,8 +287,11 @@ static void mce_panic(char *msg, struct mce *final, char *exp) struct mce *m = &mcelog.entry[i]; if (!(m->status & MCI_STATUS_VAL)) continue; - if (!(m->status & MCI_STATUS_UC)) + if (!(m->status & MCI_STATUS_UC)) { print_mce(m); + if (!apei_err) + apei_err = apei_write_mce(m); + } } /* Now print uncorrected but with the final one last */ for (i = 0; i < MCE_LOG_LEN; i++) { @@ -297,11 +300,17 @@ static void mce_panic(char *msg, struct mce *final, char *exp) continue; if (!(m->status & MCI_STATUS_UC)) continue; - if (!final || memcmp(m, final, sizeof(struct mce))) + if (!final || memcmp(m, final, sizeof(struct mce))) { print_mce(m); + if (!apei_err) + apei_err = apei_write_mce(m); + } } - if (final) + if (final) { print_mce(final); + if (!apei_err) + apei_err = apei_write_mce(final); + } if (cpu_missing) printk(KERN_EMERG "Some CPUs didn't answer in synchronization\n"); print_mce_tail(); @@ -1493,6 +1502,43 @@ static void collect_tscs(void *data) rdtscll(cpu_tsc[smp_processor_id()]); } +static int mce_apei_read_done; + +/* Collect MCE record of previous boot in persistent storage via APEI ERST. */ +static int __mce_read_apei(char __user **ubuf, size_t usize) +{ + int rc; + u64 record_id; + struct mce m; + + if (usize < sizeof(struct mce)) + return -EINVAL; + + rc = apei_read_mce(&m, &record_id); + /* Error or no more MCE record */ + if (rc <= 0) { + mce_apei_read_done = 1; + return rc; + } + rc = -EFAULT; + if (copy_to_user(*ubuf, &m, sizeof(struct mce))) + return rc; + /* + * In fact, we should have cleared the record after that has + * been flushed to the disk or sent to network in + * /sbin/mcelog, but we have no interface to support that now, + * so just clear it to avoid duplication. + */ + rc = apei_clear_mce(record_id); + if (rc) { + mce_apei_read_done = 1; + return rc; + } + *ubuf += sizeof(struct mce); + + return 0; +} + static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, loff_t *off) { @@ -1506,15 +1552,19 @@ static ssize_t mce_read(struct file *filp, char __user *ubuf, size_t usize, return -ENOMEM; mutex_lock(&mce_read_mutex); + + if (!mce_apei_read_done) { + err = __mce_read_apei(&buf, usize); + if (err || buf != ubuf) + goto out; + } + next = rcu_dereference_check_mce(mcelog.next); /* Only supports full reads right now */ - if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) { - mutex_unlock(&mce_read_mutex); - kfree(cpu_tsc); - - return -EINVAL; - } + err = -EINVAL; + if (*off != 0 || usize < MCE_LOG_LEN*sizeof(struct mce)) + goto out; err = 0; prev = 0; @@ -1562,10 +1612,15 @@ timeout: memset(&mcelog.entry[i], 0, sizeof(struct mce)); } } + + if (err) + err = -EFAULT; + +out: mutex_unlock(&mce_read_mutex); kfree(cpu_tsc); - return err ? -EFAULT : buf - ubuf; + return err ? err : buf - ubuf; } static unsigned int mce_poll(struct file *file, poll_table *wait) @@ -1573,6 +1628,8 @@ static unsigned int mce_poll(struct file *file, poll_table *wait) poll_wait(file, &mce_wait, wait); if (rcu_dereference_check_mce(mcelog.next)) return POLLIN | POLLRDNORM; + if (!mce_apei_read_done && apei_check_mce()) + return POLLIN | POLLRDNORM; return 0; } diff --git a/arch/x86/kernel/cpu/mcheck/therm_throt.c b/arch/x86/kernel/cpu/mcheck/therm_throt.c index 81c499eceb2..e1a0a3bf971 100644 --- a/arch/x86/kernel/cpu/mcheck/therm_throt.c +++ b/arch/x86/kernel/cpu/mcheck/therm_throt.c @@ -190,7 +190,7 @@ thermal_throttle_cpu_callback(struct notifier_block *nfb, mutex_unlock(&therm_cpu_lock); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block thermal_throttle_cpu_notifier __cpuinitdata = diff --git a/arch/x86/kernel/cpu/perf_event.c b/arch/x86/kernel/cpu/perf_event.c index fd4db0db370..c77586061bc 100644 --- a/arch/x86/kernel/cpu/perf_event.c +++ b/arch/x86/kernel/cpu/perf_event.c @@ -1717,7 +1717,11 @@ void perf_arch_fetch_caller_regs(struct pt_regs *regs, unsigned long ip, int ski */ regs->bp = rewind_frame_pointer(skip + 1); regs->cs = __KERNEL_CS; - local_save_flags(regs->flags); + /* + * We abuse bit 3 to pass exact information, see perf_misc_flags + * and the comment with PERF_EFLAGS_EXACT. + */ + regs->flags = 0; } unsigned long perf_instruction_pointer(struct pt_regs *regs) diff --git a/arch/x86/kernel/cpu/perf_event_p4.c b/arch/x86/kernel/cpu/perf_event_p4.c index 424fc8de68e..ae85d69644d 100644 --- a/arch/x86/kernel/cpu/perf_event_p4.c +++ b/arch/x86/kernel/cpu/perf_event_p4.c @@ -465,15 +465,21 @@ out: return rc; } -static inline void p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) +static inline int p4_pmu_clear_cccr_ovf(struct hw_perf_event *hwc) { - unsigned long dummy; + int overflow = 0; + u32 low, high; - rdmsrl(hwc->config_base + hwc->idx, dummy); - if (dummy & P4_CCCR_OVF) { + rdmsr(hwc->config_base + hwc->idx, low, high); + + /* we need to check high bit for unflagged overflows */ + if ((low & P4_CCCR_OVF) || !(high & (1 << 31))) { + overflow = 1; (void)checking_wrmsrl(hwc->config_base + hwc->idx, - ((u64)dummy) & ~P4_CCCR_OVF); + ((u64)low) & ~P4_CCCR_OVF); } + + return overflow; } static inline void p4_pmu_disable_event(struct perf_event *event) @@ -584,21 +590,15 @@ static int p4_pmu_handle_irq(struct pt_regs *regs) WARN_ON_ONCE(hwc->idx != idx); - /* - * FIXME: Redundant call, actually not needed - * but just to check if we're screwed - */ - p4_pmu_clear_cccr_ovf(hwc); + /* it might be unflagged overflow */ + handled = p4_pmu_clear_cccr_ovf(hwc); val = x86_perf_event_update(event); - if (val & (1ULL << (x86_pmu.cntval_bits - 1))) + if (!handled && (val & (1ULL << (x86_pmu.cntval_bits - 1)))) continue; - /* - * event overflow - */ - handled = 1; - data.period = event->hw.last_period; + /* event overflow for sure */ + data.period = event->hw.last_period; if (!x86_perf_event_set_period(event)) continue; @@ -670,7 +670,7 @@ static void p4_pmu_swap_config_ts(struct hw_perf_event *hwc, int cpu) /* * ESCR address hashing is tricky, ESCRs are not sequential - * in memory but all starts from MSR_P4_BSU_ESCR0 (0x03e0) and + * in memory but all starts from MSR_P4_BSU_ESCR0 (0x03a0) and * the metric between any ESCRs is laid in range [0xa0,0xe1] * * so we make ~70% filled hashtable @@ -735,8 +735,9 @@ static int p4_get_escr_idx(unsigned int addr) { unsigned int idx = P4_ESCR_MSR_IDX(addr); - if (unlikely(idx >= P4_ESCR_MSR_TABLE_SIZE || - !p4_escr_table[idx])) { + if (unlikely(idx >= P4_ESCR_MSR_TABLE_SIZE || + !p4_escr_table[idx] || + p4_escr_table[idx] != addr)) { WARN_ONCE(1, "P4 PMU: Wrong address passed: %x\n", addr); return -1; } @@ -762,7 +763,7 @@ static int p4_pmu_schedule_events(struct cpu_hw_events *cpuc, int n, int *assign { unsigned long used_mask[BITS_TO_LONGS(X86_PMC_IDX_MAX)]; unsigned long escr_mask[BITS_TO_LONGS(P4_ESCR_MSR_TABLE_SIZE)]; - int cpu = raw_smp_processor_id(); + int cpu = smp_processor_id(); struct hw_perf_event *hwc; struct p4_event_bind *bind; unsigned int i, thread, num; diff --git a/arch/x86/kernel/cpuid.c b/arch/x86/kernel/cpuid.c index 8b862d5900f..1b7b31ab7d8 100644 --- a/arch/x86/kernel/cpuid.c +++ b/arch/x86/kernel/cpuid.c @@ -170,7 +170,7 @@ static int __cpuinit cpuid_class_cpu_callback(struct notifier_block *nfb, cpuid_device_destroy(cpu); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __refdata cpuid_class_cpu_notifier = diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 4d4468e9f47..7bf2dc4c8f7 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -230,7 +230,7 @@ static int __cpuinit msr_class_cpu_callback(struct notifier_block *nfb, msr_device_destroy(cpu); break; } - return err ? NOTIFY_BAD : NOTIFY_OK; + return notifier_from_errno(err); } static struct notifier_block __refdata msr_class_cpu_notifier = { diff --git a/arch/x86/kernel/pci-swiotlb.c b/arch/x86/kernel/pci-swiotlb.c index 7d2829dde20..a5bc528d432 100644 --- a/arch/x86/kernel/pci-swiotlb.c +++ b/arch/x86/kernel/pci-swiotlb.c @@ -31,8 +31,6 @@ static struct dma_map_ops swiotlb_dma_ops = { .free_coherent = swiotlb_free_coherent, .sync_single_for_cpu = swiotlb_sync_single_for_cpu, .sync_single_for_device = swiotlb_sync_single_for_device, - .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, - .sync_single_range_for_device = swiotlb_sync_single_range_for_device, .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, .sync_sg_for_device = swiotlb_sync_sg_for_device, .map_sg = swiotlb_map_sg_attrs, diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index e8029896309..b4ae4acbd03 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -676,6 +676,17 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "DG45FC"), }, }, + /* + * The Dell Inspiron Mini 1012 has DMI_BIOS_VENDOR = "Dell Inc.", so + * match on the product name. + */ + { + .callback = dmi_low_memory_corruption, + .ident = "Phoenix BIOS", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 1012"), + }, + }, #endif {} }; diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index ef6370b00e7..a867940a6df 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -265,10 +265,10 @@ void __init setup_per_cpu_areas(void) #if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) /* - * make sure boot cpu node_number is right, when boot cpu is on the + * make sure boot cpu numa_node is right, when boot cpu is on the * node that doesn't have mem installed */ - per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id); + set_cpu_numa_node(boot_cpu_id, early_cpu_to_node(boot_cpu_id)); #endif /* Setup node to cpumask map */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 763d815e27a..37462f1ddba 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1215,9 +1215,17 @@ __init void prefill_possible_map(void) if (!num_processors) num_processors = 1; - if (setup_possible_cpus == -1) - possible = num_processors + disabled_cpus; - else + i = setup_max_cpus ?: 1; + if (setup_possible_cpus == -1) { + possible = num_processors; +#ifdef CONFIG_HOTPLUG_CPU + if (setup_max_cpus) + possible += disabled_cpus; +#else + if (possible > i) + possible = i; +#endif + } else possible = setup_possible_cpus; total_cpus = max_t(int, possible, num_processors + disabled_cpus); @@ -1230,11 +1238,23 @@ __init void prefill_possible_map(void) possible = nr_cpu_ids; } +#ifdef CONFIG_HOTPLUG_CPU + if (!setup_max_cpus) +#endif + if (possible > i) { + printk(KERN_WARNING + "%d Processors exceeds max_cpus limit of %u\n", + possible, setup_max_cpus); + possible = i; + } + printk(KERN_INFO "SMP: Allowing %d CPUs, %d hotplug CPUs\n", possible, max_t(int, possible - num_processors, 0)); for (i = 0; i < possible; i++) set_cpu_possible(i, true); + for (; i < NR_CPUS; i++) + set_cpu_possible(i, false); nr_cpu_ids = possible; } diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index 2bdf628066b..9257510b483 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -1390,7 +1390,6 @@ __init void lguest_init(void) #endif #ifdef CONFIG_ACPI acpi_disabled = 1; - acpi_ht = 0; #endif /* diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 8948f47fde0..a7bcc23ef96 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -33,9 +33,6 @@ int numa_off __initdata; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; -DEFINE_PER_CPU(int, node_number) = 0; -EXPORT_PER_CPU_SYMBOL(node_number); - /* * Map cpu index to node index */ @@ -809,7 +806,7 @@ void __cpuinit numa_set_node(int cpu, int node) per_cpu(x86_cpu_to_node_map, cpu) = node; if (node != NUMA_NO_NODE) - per_cpu(node_number, cpu) = node; + set_cpu_numa_node(cpu, node); } void __cpuinit numa_clear_node(int cpu) @@ -867,7 +864,7 @@ void __cpuinit numa_remove_cpu(int cpu) numa_set_cpumask(cpu, 0); } -int cpu_to_node(int cpu) +int __cpu_to_node(int cpu) { if (early_per_cpu_ptr(x86_cpu_to_node_map)) { printk(KERN_WARNING @@ -877,7 +874,7 @@ int cpu_to_node(int cpu) } return per_cpu(x86_cpu_to_node_map, cpu); } -EXPORT_SYMBOL(cpu_to_node); +EXPORT_SYMBOL(__cpu_to_node); /* * Same function as cpu_to_node() but used if called before the diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index bbe5502ee1c..acc15b23b74 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -336,6 +336,7 @@ int free_memtype(u64 start, u64 end) { int err = -EINVAL; int is_range_ram; + struct memtype *entry; if (!pat_enabled) return 0; @@ -355,17 +356,20 @@ int free_memtype(u64 start, u64 end) } spin_lock(&memtype_lock); - err = rbt_memtype_erase(start, end); + entry = rbt_memtype_erase(start, end); spin_unlock(&memtype_lock); - if (err) { + if (!entry) { printk(KERN_INFO "%s:%d freeing invalid memtype %Lx-%Lx\n", current->comm, current->pid, start, end); + return -EINVAL; } + kfree(entry); + dprintk("free_memtype request 0x%Lx-0x%Lx\n", start, end); - return err; + return 0; } diff --git a/arch/x86/mm/pat_internal.h b/arch/x86/mm/pat_internal.h index 4f39eefa3e6..77e5ba153fa 100644 --- a/arch/x86/mm/pat_internal.h +++ b/arch/x86/mm/pat_internal.h @@ -28,15 +28,15 @@ static inline char *cattr_name(unsigned long flags) #ifdef CONFIG_X86_PAT extern int rbt_memtype_check_insert(struct memtype *new, unsigned long *new_type); -extern int rbt_memtype_erase(u64 start, u64 end); +extern struct memtype *rbt_memtype_erase(u64 start, u64 end); extern struct memtype *rbt_memtype_lookup(u64 addr); extern int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos); #else static inline int rbt_memtype_check_insert(struct memtype *new, unsigned long *new_type) { return 0; } -static inline int rbt_memtype_erase(u64 start, u64 end) -{ return 0; } +static inline struct memtype *rbt_memtype_erase(u64 start, u64 end) +{ return NULL; } static inline struct memtype *rbt_memtype_lookup(u64 addr) { return NULL; } static inline int rbt_memtype_copy_nth_element(struct memtype *out, loff_t pos) diff --git a/arch/x86/mm/pat_rbtree.c b/arch/x86/mm/pat_rbtree.c index 07de4cb8cc3..f537087bb74 100644 --- a/arch/x86/mm/pat_rbtree.c +++ b/arch/x86/mm/pat_rbtree.c @@ -231,16 +231,17 @@ int rbt_memtype_check_insert(struct memtype *new, unsigned long *ret_type) return err; } -int rbt_memtype_erase(u64 start, u64 end) +struct memtype *rbt_memtype_erase(u64 start, u64 end) { struct memtype *data; data = memtype_rb_exact_match(&memtype_rbroot, start, end); if (!data) - return -EINVAL; + goto out; rb_erase(&data->rb, &memtype_rbroot); - return 0; +out: + return data; } struct memtype *rbt_memtype_lookup(u64 addr) diff --git a/arch/x86/mm/pf_in.c b/arch/x86/mm/pf_in.c index df3d5c861cd..308e32570d8 100644 --- a/arch/x86/mm/pf_in.c +++ b/arch/x86/mm/pf_in.c @@ -34,7 +34,7 @@ /* IA32 Manual 3, 2-1 */ static unsigned char prefix_codes[] = { 0xF0, 0xF2, 0xF3, 0x2E, 0x36, 0x3E, 0x26, 0x64, - 0x65, 0x2E, 0x3E, 0x66, 0x67 + 0x65, 0x66, 0x67 }; /* IA32 Manual 3, 3-432*/ static unsigned int reg_rop[] = { diff --git a/arch/x86/mm/pgtable_32.c b/arch/x86/mm/pgtable_32.c index 792854003ed..cac71849925 100644 --- a/arch/x86/mm/pgtable_32.c +++ b/arch/x86/mm/pgtable_32.c @@ -9,7 +9,6 @@ #include <linux/pagemap.h> #include <linux/spinlock.h> #include <linux/module.h> -#include <linux/quicklist.h> #include <asm/system.h> #include <asm/pgtable.h> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 31930fd30ea..2ec04c424a6 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -207,10 +207,9 @@ get_current_resources(struct acpi_device *device, int busnum, if (!info.res) goto res_alloc_fail; - info.name = kmalloc(16, GFP_KERNEL); + info.name = kasprintf(GFP_KERNEL, "PCI Bus %04x:%02x", domain, busnum); if (!info.name) goto name_alloc_fail; - sprintf(info.name, "PCI Bus %04x:%02x", domain, busnum); info.res_num = 0; acpi_walk_resources(device->handle, METHOD_NAME__CRS, setup_resource, @@ -224,8 +223,11 @@ res_alloc_fail: return; } -struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int domain, int busnum) +struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_pci_root *root) { + struct acpi_device *device = root->device; + int domain = root->segment; + int busnum = root->secondary.start; struct pci_bus *bus; struct pci_sysdata *sd; int node; diff --git a/arch/xtensa/include/asm/scatterlist.h b/arch/xtensa/include/asm/scatterlist.h index 810080bb0a2..b1f9fdc1d5b 100644 --- a/arch/xtensa/include/asm/scatterlist.h +++ b/arch/xtensa/include/asm/scatterlist.h @@ -11,28 +11,7 @@ #ifndef _XTENSA_SCATTERLIST_H #define _XTENSA_SCATTERLIST_H -#include <asm/types.h> - -struct scatterlist { -#ifdef CONFIG_DEBUG_SG - unsigned long sg_magic; -#endif - unsigned long page_link; - unsigned int offset; - dma_addr_t dma_address; - unsigned int length; -}; - -/* - * These macros should be used after a pci_map_sg call has been done - * to get bus addresses of each of the SG entries and their lengths. - * You should only work with the number of sg entries pci_map_sg - * returns, or alternatively stop on the first sg_dma_len(sg) which - * is 0. - */ -#define sg_dma_address(sg) ((sg)->dma_address) -#define sg_dma_len(sg) ((sg)->length) - +#include <asm-generic/scatterlist.h> #define ISA_DMA_THRESHOLD (~0UL) |