diff options
Diffstat (limited to 'arch')
78 files changed, 6164 insertions, 1068 deletions
diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7779f2d1aca..299bc046870 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -53,7 +53,7 @@ tune-$(CONFIG_CPU_ARM926T) :=-mtune=arm9tdmi tune-$(CONFIG_CPU_SA110) :=-mtune=strongarm110 tune-$(CONFIG_CPU_SA1100) :=-mtune=strongarm1100 tune-$(CONFIG_CPU_XSCALE) :=$(call cc-option,-mtune=xscale,-mtune=strongarm110) -Wa,-mcpu=xscale -tune-$(CONFIG_CPU_V6) :=-mtune=strongarm +tune-$(CONFIG_CPU_V6) :=$(call cc-option,-mtune=arm1136j-s,-mtune=strongarm) # Need -Uarm for gcc < 3.x CFLAGS_ABI :=$(call cc-option,-mapcs-32,-mabi=apcs-gnu) $(call cc-option,-mno-thumb-interwork,) diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index d3a04c2a2c8..9e5245c702d 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs; struct scoop_dev { void *base; spinlock_t scoop_lock; + unsigned short suspend_clr; + unsigned short suspend_set; u32 scoop_gpwr; }; @@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop); EXPORT_SYMBOL(read_scoop_reg); EXPORT_SYMBOL(write_scoop_reg); +static void check_scoop_reg(struct scoop_dev *sdev) +{ + unsigned short mcr; + + mcr = SCOOP_REG(sdev->base, SCOOP_MCR); + if ((mcr & 0x100) == 0) + SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101; +} + #ifdef CONFIG_PM static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level) { if (level == SUSPEND_POWER_DOWN) { struct scoop_dev *sdev = dev_get_drvdata(dev); - sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR); - SCOOP_REG(sdev->base,SCOOP_GPWR) = 0; + check_scoop_reg(sdev); + sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR); + SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set; } return 0; } @@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level) if (level == RESUME_POWER_ON) { struct scoop_dev *sdev = dev_get_drvdata(dev); + check_scoop_reg(sdev); SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr; } return 0; @@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev) SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff; SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff; + devptr->suspend_clr = inf->suspend_clr; + devptr->suspend_set = inf->suspend_set; + return 0; } diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig new file mode 100644 index 00000000000..40dfe07a8bc --- /dev/null +++ b/arch/arm/configs/collie_defconfig @@ -0,0 +1,888 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 16:55:14 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +# CONFIG_CLEAN_COMPILE is not set +CONFIG_BROKEN=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +CONFIG_ARCH_SA1100=y +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# SA11x0 Implementations +# +# CONFIG_SA1100_ASSABET is not set +# CONFIG_SA1100_CERF is not set +CONFIG_SA1100_COLLIE=y +# CONFIG_SA1100_H3100 is not set +# CONFIG_SA1100_H3600 is not set +# CONFIG_SA1100_H3800 is not set +# CONFIG_SA1100_BADGE4 is not set +# CONFIG_SA1100_JORNADA720 is not set +# CONFIG_SA1100_HACKKIT is not set +# CONFIG_SA1100_LART is not set +# CONFIG_SA1100_PLEB is not set +# CONFIG_SA1100_SHANNON is not set +# CONFIG_SA1100_SIMPAD is not set +# CONFIG_SA1100_SSP is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_SA1100=y +CONFIG_CPU_32v4=y +CONFIG_CPU_ABRT_EV4=y +CONFIG_CPU_CACHE_V4WB=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WB=y + +# +# Processor Features +# +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA=y +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +# CONFIG_SMP is not set +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +CONFIG_ARCH_DISCONTIGMEM_ENABLE=y +CONFIG_SELECT_MEMORY_MODEL=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_DISCONTIGMEM_MANUAL=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_DISCONTIGMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_NEED_MULTIPLE_NODES=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_LEDS is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +CONFIG_MTD_OBSOLETE_CHIPS=y +# CONFIG_MTD_AMDSTD is not set +CONFIG_MTD_SHARP=y +# CONFIG_MTD_JEDEC is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +# CONFIG_PNP is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=1024 +CONFIG_BLK_DEV_INITRD=y +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_ATA_OVER_ETH=m + +# +# ATA/ATAPI/MFM/RLL support +# +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# + +# +# Network device support +# +# CONFIG_NETDEVICES is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_LIBPS2 is not set +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SA1100=y +CONFIG_SERIAL_SA1100_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=m +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# +# CONFIG_MCP_SA11X0 is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_SA1100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +# CONFIG_MDA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +CONFIG_ROMFS_FS=y +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig new file mode 100644 index 00000000000..24987c89609 --- /dev/null +++ b/arch/arm/configs/corgi_defconfig @@ -0,0 +1,1523 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 15:46:42 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +# CONFIG_MACH_POODLE is not set +CONFIG_MACH_CORGI=y +CONFIG_MACH_SHEPHERD=y +CONFIG_MACH_HUSKY=y +CONFIG_PXA25x=y +CONFIG_PXA_SHARP_C7xx=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +CONFIG_XFRM_USER=m +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +CONFIG_KEYBOARD_CORGI=y +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +CONFIG_I2C_PXA=y +# CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +# CONFIG_FB_PXA is not set +CONFIG_FB_W100=y +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +CONFIG_SOUND=y + +# +# Advanced Linux Sound Architecture +# +# CONFIG_SND is not set + +# +# Open Sound System +# +CONFIG_SOUND_PRIME=y +# CONFIG_SOUND_MSNDCLAS is not set +# CONFIG_SOUND_MSNDPIN is not set +CONFIG_SOUND_OSS=y +# CONFIG_SOUND_TRACEINIT is not set +# CONFIG_SOUND_DMAP is not set +# CONFIG_SOUND_AD1816 is not set +# CONFIG_SOUND_SGALAXY is not set +# CONFIG_SOUND_ADLIB is not set +# CONFIG_SOUND_ACI_MIXER is not set +# CONFIG_SOUND_CS4232 is not set +# CONFIG_SOUND_SSCAPE is not set +# CONFIG_SOUND_GUS is not set +# CONFIG_SOUND_VMIDI is not set +# CONFIG_SOUND_TRIX is not set +# CONFIG_SOUND_MSS is not set +# CONFIG_SOUND_MPU401 is not set +# CONFIG_SOUND_NM256 is not set +# CONFIG_SOUND_MAD16 is not set +# CONFIG_SOUND_PAS is not set +# CONFIG_SOUND_PSS is not set +# CONFIG_SOUND_SB is not set +# CONFIG_SOUND_AWE32_SYNTH is not set +# CONFIG_SOUND_WAVEFRONT is not set +# CONFIG_SOUND_MAUI is not set +# CONFIG_SOUND_YM3812 is not set +# CONFIG_SOUND_OPL3SA1 is not set +# CONFIG_SOUND_OPL3SA2 is not set +# CONFIG_SOUND_UART6850 is not set +# CONFIG_SOUND_AEDSP16 is not set +# CONFIG_SOUND_TVMIXER is not set +# CONFIG_SOUND_AD1980 is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# +# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m +CONFIG_USB_VICAM=m +CONFIG_USB_DSBR=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_PWC is not set + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/poodle_defconfig b/arch/arm/configs/poodle_defconfig new file mode 100644 index 00000000000..72822907759 --- /dev/null +++ b/arch/arm/configs/poodle_defconfig @@ -0,0 +1,1015 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:04:29 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +CONFIG_MODVERSIONS=y +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +CONFIG_PXA_SHARPSL_25x=y +# CONFIG_PXA_SHARPSL_27x is not set +CONFIG_MACH_POODLE=y +# CONFIG_MACH_CORGI is not set +# CONFIG_MACH_SHEPHERD is not set +# CONFIG_MACH_HUSKY is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_LOCOMO=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_IEEE80211 is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +# CONFIG_HOSTAP is not set +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=y +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_TSDEV=y +CONFIG_INPUT_TSDEV_SCREEN_X=240 +CONFIG_INPUT_TSDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_EVBUG=y + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +CONFIG_KEYBOARD_LOCOMO=y +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +CONFIG_I2C=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=y +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_PXA is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_DS1374 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_SENSORS_MAX6875 is not set +CONFIG_I2C_DEBUG_CORE=y +CONFIG_I2C_DEBUG_ALGO=y +CONFIG_I2C_DEBUG_BUS=y +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_MAESTRO is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +CONFIG_FB_MODE_HELPERS=y +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +# CONFIG_FONT_8x16 is not set +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB is not set + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +CONFIG_USB_GADGET_PXA2XX=y +CONFIG_USB_PXA2XX=y +# CONFIG_USB_PXA2XX_SMALL is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_DUMMY_HCD is not set +# CONFIG_USB_GADGET_DUALSPEED is not set +# CONFIG_USB_ZERO is not set +CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y +# CONFIG_USB_GADGETFS is not set +# CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_G_SERIAL is not set + +# +# MMC/SD Card support +# +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_LL is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig new file mode 100644 index 00000000000..900e04f8e38 --- /dev/null +++ b/arch/arm/configs/spitz_defconfig @@ -0,0 +1,1401 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.14-rc3 +# Sun Oct 9 17:11:19 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_EMBEDDED=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_AAEC2000 is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +# CONFIG_ARCH_PXA_IDP is not set +CONFIG_PXA_SHARPSL=y +# CONFIG_PXA_SHARPSL_25x is not set +CONFIG_PXA_SHARPSL_27x=y +CONFIG_MACH_SPITZ=y +CONFIG_MACH_BORZOI=y +CONFIG_PXA27x=y +CONFIG_PXA_SHARP_Cxx00=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +CONFIG_XSCALE_PMU=y +CONFIG_SHARP_PARAM=y +CONFIG_SHARP_SCOOP=y + +# +# Bus support +# +CONFIG_ISA_DMA_API=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y + +# +# PC-card bridges +# +CONFIG_PCMCIA_PXA2XX=y + +# +# Kernel Features +# +CONFIG_PREEMPT=y +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" +# CONFIG_XIP_KERNEL is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +CONFIG_BINFMT_AOUT=m +CONFIG_BINFMT_MISC=m +# CONFIG_ARTHUR is not set + +# +# Power management options +# +CONFIG_PM=y +CONFIG_APM=y + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_BIC=y + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_INET6_TUNNEL=m +CONFIG_IPV6_TUNNEL=m +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_NETFILTER_NETLINK is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=m +# CONFIG_IP_NF_CT_ACCT is not set +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CONNTRACK_EVENTS is not set +CONFIG_IP_NF_CT_PROTO_SCTP=m +CONFIG_IP_NF_FTP=m +CONFIG_IP_NF_IRC=m +# CONFIG_IP_NF_NETBIOS_NS is not set +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +# CONFIG_IP_NF_PPTP is not set +CONFIG_IP_NF_QUEUE=m +CONFIG_IP_NF_IPTABLES=m +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_PKTTYPE=m +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=m +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=m +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +CONFIG_IP_NF_MATCH_REALM=m +CONFIG_IP_NF_MATCH_SCTP=m +# CONFIG_IP_NF_MATCH_DCCP is not set +CONFIG_IP_NF_MATCH_COMMENT=m +CONFIG_IP_NF_MATCH_HASHLIMIT=m +# CONFIG_IP_NF_MATCH_STRING is not set +CONFIG_IP_NF_FILTER=m +# CONFIG_IP_NF_TARGET_REJECT is not set +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=m +# CONFIG_IP_NF_TARGET_NFQUEUE is not set +CONFIG_IP_NF_NAT=m +CONFIG_IP_NF_NAT_NEEDED=y +# CONFIG_IP_NF_TARGET_MASQUERADE is not set +# CONFIG_IP_NF_TARGET_REDIRECT is not set +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=m +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=m +# CONFIG_IP_NF_TARGET_TOS is not set +# CONFIG_IP_NF_TARGET_ECN is not set +# CONFIG_IP_NF_TARGET_DSCP is not set +# CONFIG_IP_NF_TARGET_MARK is not set +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_TARGET_TTL is not set +CONFIG_IP_NF_RAW=m +# CONFIG_IP_NF_TARGET_NOTRACK is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_HL=m +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +CONFIG_IP6_NF_MATCH_IPV6HEADER=m +CONFIG_IP6_NF_MATCH_AHESP=m +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_TARGET_LOG is not set +# CONFIG_IP6_NF_TARGET_REJECT is not set +# CONFIG_IP6_NF_TARGET_NFQUEUE is not set +CONFIG_IP6_NF_MANGLE=m +# CONFIG_IP6_NF_TARGET_MARK is not set +# CONFIG_IP6_NF_TARGET_HL is not set +CONFIG_IP6_NF_RAW=m + +# +# DCCP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_DCCP is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set +CONFIG_NET_CLS_ROUTE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +CONFIG_IRDA=m + +# +# IrDA protocols +# +CONFIG_IRLAN=m +CONFIG_IRNET=m +CONFIG_IRCOMM=m +# CONFIG_IRDA_ULTRA is not set + +# +# IrDA options +# +# CONFIG_IRDA_CACHE_LAST_LSAP is not set +# CONFIG_IRDA_FAST_RR is not set +# CONFIG_IRDA_DEBUG is not set + +# +# Infrared-port device drivers +# + +# +# SIR device drivers +# +# CONFIG_IRTTY_SIR is not set + +# +# Dongle support +# + +# +# Old SIR device drivers +# +# CONFIG_IRPORT_SIR is not set + +# +# Old Serial dongle support +# + +# +# FIR device drivers +# +# CONFIG_USB_IRDA is not set +# CONFIG_SIGMATEL_FIR is not set +# CONFIG_NSC_FIR is not set +# CONFIG_WINBOND_FIR is not set +# CONFIG_SMC_IRCC_FIR is not set +# CONFIG_ALI_FIR is not set +# CONFIG_VIA_FIR is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +CONFIG_BT_HCIUSB=m +# CONFIG_BT_HCIUSB_SCO is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +CONFIG_BT_HCIBCM203X=m +CONFIG_BT_HCIBPA10X=m +CONFIG_BT_HCIBFUSB=m +CONFIG_BT_HCIDTL1=m +CONFIG_BT_HCIBT3C=m +CONFIG_BT_HCIBLUECARD=m +CONFIG_BT_HCIBTUART=m +CONFIG_BT_HCIVHCI=m +CONFIG_IEEE80211=m +# CONFIG_IEEE80211_DEBUG is not set +CONFIG_IEEE80211_CRYPT_WEP=m +# CONFIG_IEEE80211_CRYPT_CCMP is not set +# CONFIG_IEEE80211_CRYPT_TKIP is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +CONFIG_MTD_ROM=y +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_SHARP_SL=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_H1900 is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +CONFIG_MTD_NAND_SHARPSL=y +# CONFIG_MTD_NAND_NANDSIM is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_BLK_DEV_IDECS=y +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +CONFIG_IDE_GENERIC=y +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +CONFIG_CHR_DEV_ST=m +CONFIG_CHR_DEV_OSST=m +CONFIG_BLK_DEV_SR=m +# CONFIG_BLK_DEV_SR_VENDOR is not set +CONFIG_CHR_DEV_SG=m +# CONFIG_CHR_DEV_SCH is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set +# CONFIG_SCSI_SAS_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# Network device support +# +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# PHY device support +# +# CONFIG_PHYLIB is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=m +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_HERMES=m +# CONFIG_ATMEL is not set + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +CONFIG_PCMCIA_HERMES=m +CONFIG_PCMCIA_SPECTRUM=m +# CONFIG_AIRO_CS is not set +# CONFIG_PCMCIA_WL3501 is not set +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_CS=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +CONFIG_NET_PCMCIA=y +# CONFIG_PCMCIA_3C589 is not set +# CONFIG_PCMCIA_3C574 is not set +# CONFIG_PCMCIA_FMVJ18X is not set +CONFIG_PCMCIA_PCNET=m +# CONFIG_PCMCIA_NMCLAN is not set +# CONFIG_PCMCIA_SMC91C92 is not set +# CONFIG_PCMCIA_XIRC2PS is not set +# CONFIG_PCMCIA_AXNET is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_PPP_DEFLATE is not set +CONFIG_PPP_BSDCOMP=m +# CONFIG_PPPOE is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_CORGI is not set +CONFIG_KEYBOARD_SPITZ=y +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_CORGI=y +# CONFIG_TOUCHSCREEN_GUNZE is not set +# CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_MK712 is not set +CONFIG_INPUT_MISC=y +CONFIG_INPUT_UINPUT=m + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=m +CONFIG_SERIAL_8250_CS=m +CONFIG_SERIAL_8250_NR_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_RAW_DRIVER is not set + +# +# TPM devices +# + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Hardware Monitoring support +# +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_HWMON_DEBUG_CHIP is not set + +# +# Misc devices +# + +# +# Multimedia Capabilities Port drivers +# + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +CONFIG_FB=y +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +CONFIG_FB_SOFT_CURSOR=y +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_W100 is not set +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +# CONFIG_FONT_6x11 is not set +# CONFIG_FONT_7x14 is not set +# CONFIG_FONT_PEARL_8x8 is not set +# CONFIG_FONT_ACORN_8x8 is not set +# CONFIG_FONT_MINI_4x6 is not set +# CONFIG_FONT_SUN8x16 is not set +# CONFIG_FONT_SUN12x22 is not set +# CONFIG_FONT_10x18 is not set + +# +# Logo configuration +# +# CONFIG_LOGO is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_DEVICE=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_DEVICE=y +CONFIG_BACKLIGHT_CORGI=y + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +CONFIG_USB_SL811_HCD=m +CONFIG_USB_SL811_CS=m + +# +# USB Device Class drivers +# + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +# CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=m +CONFIG_USB_HIDINPUT=y +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set + +# +# USB HID Boot Protocol drivers +# +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m +CONFIG_USB_AIPTEK=m +CONFIG_USB_WACOM=m +# CONFIG_USB_ACECAD is not set +CONFIG_USB_KBTAB=m +CONFIG_USB_POWERMATE=m +CONFIG_USB_MTOUCH=m +# CONFIG_USB_ITMTOUCH is not set +CONFIG_USB_EGALAX=m +# CONFIG_USB_YEALINK is not set +CONFIG_USB_XPAD=m +CONFIG_USB_ATI_REMOTE=m +# CONFIG_USB_KEYSPAN_REMOTE is not set +# CONFIG_USB_APPLETOUCH is not set + +# +# USB Imaging devices +# +CONFIG_USB_MDC800=m +CONFIG_USB_MICROTEK=m + +# +# USB Multimedia devices +# +CONFIG_USB_DABUSB=m + +# +# Video4Linux support is needed for USB Multimedia device support +# + +# +# USB Network Adapters +# +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m +# CONFIG_USB_ZD1201 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +CONFIG_USB_SERIAL_GENERIC=y +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m +# CONFIG_USB_SERIAL_CP2101 is not set +CONFIG_USB_SERIAL_CYPRESS_M8=m +CONFIG_USB_SERIAL_EMPEG=m +CONFIG_USB_SERIAL_FTDI_SIO=m +CONFIG_USB_SERIAL_VISOR=m +CONFIG_USB_SERIAL_IPAQ=m +CONFIG_USB_SERIAL_IR=m +CONFIG_USB_SERIAL_EDGEPORT=m +CONFIG_USB_SERIAL_EDGEPORT_TI=m +CONFIG_USB_SERIAL_GARMIN=m +CONFIG_USB_SERIAL_IPW=m +CONFIG_USB_SERIAL_KEYSPAN_PDA=m +CONFIG_USB_SERIAL_KEYSPAN=m +# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set +# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set +CONFIG_USB_SERIAL_KLSI=m +CONFIG_USB_SERIAL_KOBIL_SCT=m +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +CONFIG_USB_SERIAL_SAFE=m +# CONFIG_USB_SERIAL_SAFE_PADDED is not set +CONFIG_USB_SERIAL_TI=m +CONFIG_USB_SERIAL_CYBERJACK=m +CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set +CONFIG_USB_SERIAL_OMNINET=m +CONFIG_USB_EZUSB=y + +# +# USB Miscellaneous drivers +# +CONFIG_USB_EMI62=m +CONFIG_USB_EMI26=m +CONFIG_USB_AUERSWALD=m +CONFIG_USB_RIO500=m +CONFIG_USB_LEGOTOWER=m +CONFIG_USB_LCD=m +CONFIG_USB_LED=m +CONFIG_USB_CYTHERM=m +CONFIG_USB_PHIDGETKIT=m +CONFIG_USB_PHIDGETSERVO=m +CONFIG_USB_IDMOUSE=m +# CONFIG_USB_LD is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_SELECTED=y +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_PXA2XX is not set +# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_DUMMY_HCD=y +CONFIG_USB_DUMMY_HCD=m +CONFIG_USB_GADGET_DUALSPEED=y +CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_GADGETFS=m +CONFIG_USB_FILE_STORAGE=m +# CONFIG_USB_FILE_STORAGE_TEST is not set +CONFIG_USB_G_SERIAL=m + +# +# MMC/SD Card support +# +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +CONFIG_MMC_BLOCK=y +CONFIG_MMC_PXA=y +# CONFIG_MMC_WBSD is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +CONFIG_EXT2_FS_SECURITY=y +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y +# CONFIG_RELAYFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +CONFIG_JFFS2_RUBIN=y +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +CONFIG_CRAMFS=m +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=m +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_LOCKD=m +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=m +CONFIG_SUNRPC_GSS=m +CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=m +CONFIG_SMB_NLS_DEFAULT=y +CONFIG_SMB_NLS_REMOTE="cp437" +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set +# CONFIG_9P_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +# CONFIG_MAC_PARTITION is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="cp437" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y + +# +# Profiling support +# +CONFIG_PROFILING=y +CONFIG_OPROFILE=m + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_NULL=m +CONFIG_CRYPTO_MD4=m +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA512=m +CONFIG_CRYPTO_WP512=m +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +CONFIG_CRYPTO_BLOWFISH=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_CAST5=m +CONFIG_CRYPTO_CAST6=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_KHAZAD=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +CONFIG_CRYPTO_CRC32C=m +CONFIG_CRYPTO_TEST=m + +# +# Hardware crypto devices +# + +# +# Library routines +# +CONFIG_CRC_CCITT=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=y +CONFIG_LIBCRC32C=m +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index 835d450797a..7b17a87a331 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -45,8 +45,8 @@ extern void fp_enter(void); #define EXPORT_SYMBOL_ALIAS(sym,orig) \ EXPORT_CRC_ALIAS(sym) \ - const struct kernel_symbol __ksymtab_##sym \ - __attribute__((section("__ksymtab"))) = \ + static const struct kernel_symbol __ksymtab_##sym \ + __attribute_used__ __attribute__((section("__ksymtab"))) = \ { (unsigned long)&orig, #sym }; /* diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 81d450ac3fa..066597f4345 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -106,15 +106,10 @@ ENTRY(ret_from_fork) .endm .Larm700bug: - ldr r0, [sp, #S_PSR] @ Get calling cpsr - sub lr, lr, #4 - str lr, [r8] - msr spsr_cxsf, r0 ldmia sp, {r0 - lr}^ @ Get calling r0 - lr mov r0, r0 - ldr lr, [sp, #S_PC] @ Get PC add sp, sp, #S_FRAME_SIZE - movs pc, lr + subs pc, lr, #4 #else .macro arm710_bug_check, instr, temp .endm diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index be37586cb1b..60c8b9d8bb9 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -36,6 +36,7 @@ #include <asm/arch/mmc.h> #include <asm/arch/udc.h> #include <asm/arch/corgi.h> +#include <asm/arch/sharpsl.h> #include <asm/mach/sharpsl_param.h> #include <asm/hardware/scoop.h> diff --git a/arch/arm/mach-s3c2410/mach-anubis.c b/arch/arm/mach-s3c2410/mach-anubis.c index 7c05f27fe1d..5ae80f4e3e6 100644 --- a/arch/arm/mach-s3c2410/mach-anubis.c +++ b/arch/arm/mach-s3c2410/mach-anubis.c @@ -125,7 +125,7 @@ static int external_map[] = { 2 }; static int chip0_map[] = { 0 }; static int chip1_map[] = { 1 }; -struct mtd_partition anubis_default_nand_part[] = { +static struct mtd_partition anubis_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index ed1f07d7252..8ca95598464 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -230,7 +230,7 @@ static int chip0_map[] = { 1 }; static int chip1_map[] = { 2 }; static int chip2_map[] = { 3 }; -struct mtd_partition bast_default_nand_part[] = { +static struct mtd_partition bast_default_nand_part[] = { [0] = { .name = "Boot Agent", .size = SZ_16K, @@ -340,7 +340,7 @@ static struct resource bast_dm9k_resource[] = { * better IO routines can be written and tested */ -struct dm9000_plat_data bast_dm9k_platdata = { +static struct dm9000_plat_data bast_dm9k_platdata = { .flags = DM9000_PLATF_16BITONLY }; diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 663a7f98fc0..46b259673c1 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -288,7 +288,7 @@ static struct resource vr1000_dm9k1_resource[] = { * better IO routines can be written and tested */ -struct dm9000_plat_data vr1000_dm9k_platdata = { +static struct dm9000_plat_data vr1000_dm9k_platdata = { .flags = DM9000_PLATF_16BITONLY, }; diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index 0b88993dfd2..a8bf5ec8260 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -125,9 +125,6 @@ static struct platform_device *uart_devices[] __initdata = { &s3c_uart2 }; -/* store our uart devices for the serial driver console */ -struct platform_device *s3c2410_uart_devices[3]; - static int s3c2410_uart_count = 0; /* uart registration process */ diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c index d4c8281b55f..833fa36bce0 100644 --- a/arch/arm/mach-s3c2410/s3c2440.c +++ b/arch/arm/mach-s3c2410/s3c2440.c @@ -151,7 +151,7 @@ void __init s3c2440_init_uarts(struct s3c2410_uartcfg *cfg, int no) #ifdef CONFIG_PM -struct sleep_save s3c2440_sleep[] = { +static struct sleep_save s3c2440_sleep[] = { SAVE_ITEM(S3C2440_DSC0), SAVE_ITEM(S3C2440_DSC1), SAVE_ITEM(S3C2440_GPJDAT), @@ -260,7 +260,7 @@ void __init s3c2440_init_clocks(int xtal) * as a driver which may support both 2410 and 2440 may try and use it. */ -int __init s3c2440_core_init(void) +static int __init s3c2440_core_init(void) { return sysdev_class_register(&s3c2440_sysclass); } diff --git a/arch/arm/mach-s3c2410/time.c b/arch/arm/mach-s3c2410/time.c index c0acfb2ad79..8a00e3c3cd0 100644 --- a/arch/arm/mach-s3c2410/time.c +++ b/arch/arm/mach-s3c2410/time.c @@ -38,6 +38,7 @@ #include <asm/hardware/clock.h> #include "clock.h" +#include "cpu.h" static unsigned long timer_startval; static unsigned long timer_usec_ticks; diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 25d6a4e2753..6ecab7e2c23 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = { static void collie_set_vpp(int vpp) { - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN); if (vpp) - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN); else - write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN); + write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN); } static struct flash_platform_data collie_flash_data = { diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index db5e47dfc30..c54e04c995e 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -370,21 +370,21 @@ config CPU_BIG_ENDIAN config CPU_ICACHE_DISABLE bool "Disable I-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 + depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 help Say Y here to disable the processor instruction cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_DISABLE bool "Disable D-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 + depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -399,7 +399,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 + depends on CPU_ARM1020 || CPU_V6 help Say Y here to disable branch prediction. If unsure, say N. diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 4b39d867ac1..705c98921c3 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -111,7 +111,7 @@ proc_alignment_read(char *page, char **start, off_t off, int count, int *eof, } static int proc_alignment_write(struct file *file, const char __user *buffer, - unsigned long count, void *data) + unsigned long count, void *data) { char mode; @@ -119,7 +119,7 @@ static int proc_alignment_write(struct file *file, const char __user *buffer, if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = mode - '0'; } return count; } @@ -262,7 +262,7 @@ union offset_union { goto fault; \ } while (0) -#define put32_unaligned_check(val,addr) \ +#define put32_unaligned_check(val,addr) \ __put32_unaligned_check("strb", val, addr) #define put32t_unaligned_check(val,addr) \ @@ -306,19 +306,19 @@ do_alignment_ldrhstrh(unsigned long addr, unsigned long instr, struct pt_regs *r return TYPE_LDST; user: - if (LDST_L_BIT(instr)) { - unsigned long val; - get16t_unaligned_check(val, addr); + if (LDST_L_BIT(instr)) { + unsigned long val; + get16t_unaligned_check(val, addr); - /* signed half-word? */ - if (instr & 0x40) - val = (signed long)((signed short) val); + /* signed half-word? */ + if (instr & 0x40) + val = (signed long)((signed short) val); - regs->uregs[rd] = val; - } else - put16t_unaligned_check(regs->uregs[rd], addr); + regs->uregs[rd] = val; + } else + put16t_unaligned_check(regs->uregs[rd], addr); - return TYPE_LDST; + return TYPE_LDST; fault: return TYPE_FAULT; @@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, { unsigned int rd = RD_BITS(instr); + if (((rd & 1) == 1) || (rd == 14)) + goto bad; + ai_dword += 1; if (user_mode(regs)) @@ -339,11 +342,11 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, unsigned long val; get32_unaligned_check(val, addr); regs->uregs[rd] = val; - get32_unaligned_check(val, addr+4); - regs->uregs[rd+1] = val; + get32_unaligned_check(val, addr + 4); + regs->uregs[rd + 1] = val; } else { put32_unaligned_check(regs->uregs[rd], addr); - put32_unaligned_check(regs->uregs[rd+1], addr+4); + put32_unaligned_check(regs->uregs[rd + 1], addr + 4); } return TYPE_LDST; @@ -353,15 +356,16 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr, unsigned long val; get32t_unaligned_check(val, addr); regs->uregs[rd] = val; - get32t_unaligned_check(val, addr+4); - regs->uregs[rd+1] = val; + get32t_unaligned_check(val, addr + 4); + regs->uregs[rd + 1] = val; } else { put32t_unaligned_check(regs->uregs[rd], addr); - put32t_unaligned_check(regs->uregs[rd+1], addr+4); + put32t_unaligned_check(regs->uregs[rd + 1], addr + 4); } return TYPE_LDST; - + bad: + return TYPE_ERROR; fault: return TYPE_FAULT; } @@ -439,7 +443,7 @@ do_alignment_ldmstm(unsigned long addr, unsigned long instr, struct pt_regs *reg if (LDST_P_EQ_U(instr)) /* U = P */ eaddr += 4; - /* + /* * For alignment faults on the ARM922T/ARM920T the MMU makes * the FSR (and hence addr) equal to the updated base address * of the multiple access rather than the restored value. @@ -566,7 +570,7 @@ thumb2arm(u16 tinstr) /* 6.5.1 Format 3: */ case 0x4800 >> 11: /* 7.1.28 LDR(3) */ /* NOTE: This case is not technically possible. We're - * loading 32-bit memory data via PC relative + * loading 32-bit memory data via PC relative * addressing mode. So we can and should eliminate * this case. But I'll leave it here for now. */ @@ -638,7 +642,7 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (fault) { type = TYPE_FAULT; - goto bad_or_fault; + goto bad_or_fault; } if (user_mode(regs)) @@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */ (instr & 0x001000f0) == 0x000000f0) /* STRD */ handler = do_alignment_ldrdstrd; + else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */ + goto swp; else goto bad; break; @@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) do_bad_area(current, current->mm, addr, fsr, regs); return 0; + swp: + printk(KERN_ERR "Alignment trap: not handling swp instruction\n"); + bad: /* * Oops, we didn't handle the instruction. diff --git a/arch/arm/nwfpe/fpa11.c b/arch/arm/nwfpe/fpa11.c index 7690f731ee8..7b3d74d73c8 100644 --- a/arch/arm/nwfpe/fpa11.c +++ b/arch/arm/nwfpe/fpa11.c @@ -31,11 +31,6 @@ #include <linux/string.h> #include <asm/system.h> -/* forward declarations */ -unsigned int EmulateCPDO(const unsigned int); -unsigned int EmulateCPDT(const unsigned int); -unsigned int EmulateCPRT(const unsigned int); - /* Reset the FPA11 chip. Called to initialize and reset the emulator. */ static void resetFPA11(void) { diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h index 93523ae4b7a..9677ae8448e 100644 --- a/arch/arm/nwfpe/fpa11.h +++ b/arch/arm/nwfpe/fpa11.h @@ -95,4 +95,24 @@ extern int8 SetRoundingMode(const unsigned int); extern int8 SetRoundingPrecision(const unsigned int); extern void nwfpe_init_fpa(union fp_state *fp); +extern unsigned int EmulateAll(unsigned int opcode); + +extern unsigned int EmulateCPDT(const unsigned int opcode); +extern unsigned int EmulateCPDO(const unsigned int opcode); +extern unsigned int EmulateCPRT(const unsigned int opcode); + +/* fpa11_cpdt.c */ +extern unsigned int PerformLDF(const unsigned int opcode); +extern unsigned int PerformSTF(const unsigned int opcode); +extern unsigned int PerformLFM(const unsigned int opcode); +extern unsigned int PerformSFM(const unsigned int opcode); + +/* single_cpdo.c */ + +extern unsigned int SingleCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); +/* double_cpdo.c */ +extern unsigned int DoubleCPDO(struct roundingData *roundData, + const unsigned int opcode, FPREG * rFd); + #endif diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c index adf8d300054..7c67023655e 100644 --- a/arch/arm/nwfpe/fpa11_cprt.c +++ b/arch/arm/nwfpe/fpa11_cprt.c @@ -26,12 +26,11 @@ #include "fpa11.inl" #include "fpmodule.h" #include "fpmodule.inl" +#include "softfloat.h" #ifdef CONFIG_FPE_NWFPE_XP extern flag floatx80_is_nan(floatx80); #endif -extern flag float64_is_nan(float64); -extern flag float32_is_nan(float32); unsigned int PerformFLT(const unsigned int opcode); unsigned int PerformFIX(const unsigned int opcode); diff --git a/arch/arm/nwfpe/fpopcode.h b/arch/arm/nwfpe/fpopcode.h index 1777e92a88e..6528e081c83 100644 --- a/arch/arm/nwfpe/fpopcode.h +++ b/arch/arm/nwfpe/fpopcode.h @@ -476,4 +476,10 @@ static inline unsigned int getDestinationSize(const unsigned int opcode) return (nRc); } +extern unsigned int checkCondition(const unsigned int opcode, + const unsigned int ccodes); + +extern const float64 float64Constant[]; +extern const float32 float32Constant[]; + #endif diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h index 1c8799b9ee4..14151700b6b 100644 --- a/arch/arm/nwfpe/softfloat.h +++ b/arch/arm/nwfpe/softfloat.h @@ -265,4 +265,7 @@ static inline flag float64_lt_nocheck(float64 a, float64 b) return (a != b) && (aSign ^ (a < b)); } +extern flag float32_is_nan( float32 a ); +extern flag float64_is_nan( float64 a ); + #endif diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 6d3a79e5fef..ae7c64b8cec 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -2,11 +2,17 @@ # # This file is linux/arch/arm/tools/mach-types # +# Up to date versions of this file can be obtained from: +# +# http://www.arm.linux.org.uk/developer/machines/?action=download +# # Please do not send patches to this file; it is automatically generated! # To add an entry into this database, please see Documentation/arm/README, -# or contact rmk@arm.linux.org.uk +# or visit: +# +# http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Thu Jun 23 20:19:33 2005 +# Last update: Mon Oct 10 09:46:25 2005 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -421,7 +427,7 @@ mt02 MACH_MT02 MT02 410 mport3s MACH_MPORT3S MPORT3S 411 ra_alpha MACH_RA_ALPHA RA_ALPHA 412 xcep MACH_XCEP XCEP 413 -arcom_mercury MACH_ARCOM_MERCURY ARCOM_MERCURY 414 +arcom_vulcan MACH_ARCOM_VULCAN ARCOM_VULCAN 414 stargate MACH_STARGATE STARGATE 415 armadilloj MACH_ARMADILLOJ ARMADILLOJ 416 elroy_jack MACH_ELROY_JACK ELROY_JACK 417 @@ -454,7 +460,7 @@ esl_sarva MACH_ESL_SARVA ESL_SARVA 443 xm250 MACH_XM250 XM250 444 t6tc1xb MACH_T6TC1XB T6TC1XB 445 ess710 MACH_ESS710 ESS710 446 -mx3ads MACH_MX3ADS MX3ADS 447 +mx31ads MACH_MX3ADS MX3ADS 447 himalaya MACH_HIMALAYA HIMALAYA 448 bolfenk MACH_BOLFENK BOLFENK 449 at91rm9200kr MACH_AT91RM9200KR AT91RM9200KR 450 @@ -787,3 +793,79 @@ ez_ixp42x MACH_EZ_IXP42X EZ_IXP42X 778 tapwave_zodiac MACH_TAPWAVE_ZODIAC TAPWAVE_ZODIAC 779 universalmeter MACH_UNIVERSALMETER UNIVERSALMETER 780 hicoarm9 MACH_HICOARM9 HICOARM9 781 +pnx4008 MACH_PNX4008 PNX4008 782 +kws6000 MACH_KWS6000 KWS6000 783 +portux920t MACH_PORTUX920T PORTUX920T 784 +ez_x5 MACH_EZ_X5 EZ_X5 785 +omap_rudolph MACH_OMAP_RUDOLPH OMAP_RUDOLPH 786 +cpuat91 MACH_CPUAT91 CPUAT91 787 +rea9200 MACH_REA9200 REA9200 788 +acts_pune_sa1110 MACH_ACTS_PUNE_SA1110 ACTS_PUNE_SA1110 789 +ixp425 MACH_IXP425 IXP425 790 +argonplusodyssey MACH_ODYSSEY ODYSSEY 791 +perch MACH_PERCH PERCH 792 +eis05r1 MACH_EIS05R1 EIS05R1 793 +pepperpad MACH_PEPPERPAD PEPPERPAD 794 +sb3010 MACH_SB3010 SB3010 795 +rm9200 MACH_RM9200 RM9200 796 +dma03 MACH_DMA03 DMA03 797 +road_s101 MACH_ROAD_S101 ROAD_S101 798 +iq_nextgen_a MACH_IQ_NEXTGEN_A IQ_NEXTGEN_A 799 +iq_nextgen_b MACH_IQ_NEXTGEN_B IQ_NEXTGEN_B 800 +iq_nextgen_c MACH_IQ_NEXTGEN_C IQ_NEXTGEN_C 801 +iq_nextgen_d MACH_IQ_NEXTGEN_D IQ_NEXTGEN_D 802 +iq_nextgen_e MACH_IQ_NEXTGEN_E IQ_NEXTGEN_E 803 +mallow_at91 MACH_MALLOW_AT91 MALLOW_AT91 804 +cybertracker MACH_CYBERTRACKER CYBERTRACKER 805 +gesbc931x MACH_GESBC931X GESBC931X 806 +centipad MACH_CENTIPAD CENTIPAD 807 +armsoc MACH_ARMSOC ARMSOC 808 +se4200 MACH_SE4200 SE4200 809 +ems197a MACH_EMS197A EMS197A 810 +micro9 MACH_MICRO9 MICRO9 811 +micro9l MACH_MICRO9L MICRO9L 812 +uc5471dsp MACH_UC5471DSP UC5471DSP 813 +sj5471eng MACH_SJ5471ENG SJ5471ENG 814 +none MACH_CMPXA26X CMPXA26X 815 +nc MACH_NC NC 816 +omap_palmte MACH_OMAP_PALMTE OMAP_PALMTE 817 +ajax52x MACH_AJAX52X AJAX52X 818 +siriustar MACH_SIRIUSTAR SIRIUSTAR 819 +iodata_hdlg MACH_IODATA_HDLG IODATA_HDLG 820 +at91rm9200utl MACH_AT91RM9200UTL AT91RM9200UTL 821 +biosafe MACH_BIOSAFE BIOSAFE 822 +mp1000 MACH_MP1000 MP1000 823 +parsy MACH_PARSY PARSY 824 +ccxp270 MACH_CCXP CCXP 825 +omap_gsample MACH_OMAP_GSAMPLE OMAP_GSAMPLE 826 +realview_eb MACH_REALVIEW_EB REALVIEW_EB 827 +samoa MACH_SAMOA SAMOA 828 +t3xscale MACH_T3XSCALE T3XSCALE 829 +i878 MACH_I878 I878 830 +borzoi MACH_BORZOI BORZOI 831 +gecko MACH_GECKO GECKO 832 +ds101 MACH_DS101 DS101 833 +omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834 +xscale_palmld MACH_XSCALE_PALMLD XSCALE_PALMLD 835 +cc9c MACH_CC9C CC9C 836 +sbc1670 MACH_SBC1670 SBC1670 837 +ixdp28x5 MACH_IXDP28X5 IXDP28X5 838 +omap_palmtt MACH_OMAP_PALMTT OMAP_PALMTT 839 +ml696k MACH_ML696K ML696K 840 +arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841 +osiris MACH_OSIRIS OSIRIS 842 +maestro MACH_MAESTRO MAESTRO 843 +tunge2 MACH_TUNGE2 TUNGE2 844 +ixbbm MACH_IXBBM IXBBM 845 +mx27 MACH_MX27 MX27 846 +ax8004 MACH_AX8004 AX8004 847 +at91sam9261ek MACH_AT91SAM9261EK AT91SAM9261EK 848 +loft MACH_LOFT LOFT 849 +magpie MACH_MAGPIE MAGPIE 850 +mx21 MACH_MX21 MX21 851 +mb87m3400 MACH_MB87M3400 MB87M3400 852 +mguard_delta MACH_MGUARD_DELTA MGUARD_DELTA 853 +davinci_dvdp MACH_DAVINCI_DVDP DAVINCI_DVDP 854 +htcuniversal MACH_HTCUNIVERSAL HTCUNIVERSAL 855 +tpad MACH_TPAD TPAD 856 +roverp3 MACH_ROVERP3 ROVERP3 857 diff --git a/arch/cris/arch-v32/drivers/pci/dma.c b/arch/cris/arch-v32/drivers/pci/dma.c index 10329306d23..426b09878a0 100644 --- a/arch/cris/arch-v32/drivers/pci/dma.c +++ b/arch/cris/arch-v32/drivers/pci/dma.c @@ -24,7 +24,7 @@ struct dma_coherent_mem { }; void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; diff --git a/arch/cris/arch-v32/kernel/smp.c b/arch/cris/arch-v32/kernel/smp.c index 2c5cae04a95..957f551ba5c 100644 --- a/arch/cris/arch-v32/kernel/smp.c +++ b/arch/cris/arch-v32/kernel/smp.c @@ -15,6 +15,7 @@ #include <linux/kernel.h> #include <linux/cpumask.h> #include <linux/interrupt.h> +#include <linux/module.h> #define IPI_SCHEDULE 1 #define IPI_CALL 2 @@ -28,6 +29,7 @@ spinlock_t cris_atomic_locks[] = { [0 ... LOCK_COUNT - 1] = SPIN_LOCK_UNLOCKED}; /* CPU masks */ cpumask_t cpu_online_map = CPU_MASK_NONE; cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +EXPORT_SYMBOL(phys_cpu_present_map); /* Variables used during SMP boot */ volatile int cpu_now_booting = 0; diff --git a/arch/i386/kernel/cpu/amd.c b/arch/i386/kernel/cpu/amd.c index 4c1ddf2b57c..53a1681cd96 100644 --- a/arch/i386/kernel/cpu/amd.c +++ b/arch/i386/kernel/cpu/amd.c @@ -29,7 +29,7 @@ static void __init init_amd(struct cpuinfo_x86 *c) int r; #ifdef CONFIG_SMP - unsigned long value; + unsigned long long value; /* Disable TLB flush filter by setting HWCR.FFDIS on K8 * bit 6 of msr C001_0015 diff --git a/arch/i386/kernel/pci-dma.c b/arch/i386/kernel/pci-dma.c index 1e51427cc9e..25fe6685393 100644 --- a/arch/i386/kernel/pci-dma.c +++ b/arch/i386/kernel/pci-dma.c @@ -23,7 +23,7 @@ struct dma_coherent_mem { }; void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast gfp) + dma_addr_t *dma_handle, gfp_t gfp) { void *ret; struct dma_coherent_mem *mem = dev ? dev->dma_mem : NULL; diff --git a/arch/i386/kernel/signal.c b/arch/i386/kernel/signal.c index 61eb0c8a6e4..adcd069db91 100644 --- a/arch/i386/kernel/signal.c +++ b/arch/i386/kernel/signal.c @@ -338,7 +338,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) esp = (unsigned long) ka->sa.sa_restorer; } - return (void __user *)((esp - frame_size) & -8ul); + esp -= frame_size; + /* Align the stack pointer according to the i386 ABI, + * i.e. so that on function entry ((sp + 4) & 15) == 0. */ + esp = ((esp + 4) & -16ul) - 4; + return (void __user *) esp; } /* These symbols are defined with the addresses in the vsyscall page. diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 6dc726ad713..d0a5106fba2 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1016,6 +1016,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) cmc_polling_enabled = 1; spin_unlock(&cmc_history_lock); + /* If we're being hit with CMC interrupts, we won't + * ever execute the schedule_work() below. Need to + * disable CMC interrupts on this processor now. + */ + ia64_mca_cmc_vector_disable(NULL); schedule_work(&cmc_disable_work); /* diff --git a/arch/m32r/kernel/entry.S b/arch/m32r/kernel/entry.S index dddbf6b5ed2..85920fb8d08 100644 --- a/arch/m32r/kernel/entry.S +++ b/arch/m32r/kernel/entry.S @@ -681,6 +681,15 @@ ENTRY(debug_trap) bl do_debug_trap bra error_code +ENTRY(ill_trap) + /* void ill_trap(void) */ + SWITCH_TO_KERNEL_STACK + SAVE_ALL + ldi r1, #0 ; error_code ; FIXME + mv r0, sp ; pt_regs + bl do_ill_trap + bra error_code + /* Cache flushing handler */ ENTRY(cache_flushing_handler) diff --git a/arch/m32r/kernel/traps.c b/arch/m32r/kernel/traps.c index 01922271d17..5fe8ed6d62d 100644 --- a/arch/m32r/kernel/traps.c +++ b/arch/m32r/kernel/traps.c @@ -5,8 +5,6 @@ * Hitoshi Yamamoto */ -/* $Id$ */ - /* * 'traps.c' handles hardware traps and faults after we have saved some * state in 'entry.S'. @@ -35,6 +33,7 @@ asmlinkage void ei_handler(void); asmlinkage void rie_handler(void); asmlinkage void debug_trap(void); asmlinkage void cache_flushing_handler(void); +asmlinkage void ill_trap(void); #ifdef CONFIG_SMP extern void smp_reschedule_interrupt(void); @@ -77,22 +76,22 @@ void set_eit_vector_entries(void) eit_vector[5] = BRA_INSN(default_eit_handler, 5); eit_vector[8] = BRA_INSN(rie_handler, 8); eit_vector[12] = BRA_INSN(alignment_check, 12); - eit_vector[16] = 0xff000000UL; + eit_vector[16] = BRA_INSN(ill_trap, 16); eit_vector[17] = BRA_INSN(debug_trap, 17); eit_vector[18] = BRA_INSN(system_call, 18); - eit_vector[19] = 0xff000000UL; - eit_vector[20] = 0xff000000UL; - eit_vector[21] = 0xff000000UL; - eit_vector[22] = 0xff000000UL; - eit_vector[23] = 0xff000000UL; - eit_vector[24] = 0xff000000UL; - eit_vector[25] = 0xff000000UL; - eit_vector[26] = 0xff000000UL; - eit_vector[27] = 0xff000000UL; + eit_vector[19] = BRA_INSN(ill_trap, 19); + eit_vector[20] = BRA_INSN(ill_trap, 20); + eit_vector[21] = BRA_INSN(ill_trap, 21); + eit_vector[22] = BRA_INSN(ill_trap, 22); + eit_vector[23] = BRA_INSN(ill_trap, 23); + eit_vector[24] = BRA_INSN(ill_trap, 24); + eit_vector[25] = BRA_INSN(ill_trap, 25); + eit_vector[26] = BRA_INSN(ill_trap, 26); + eit_vector[27] = BRA_INSN(ill_trap, 27); eit_vector[28] = BRA_INSN(cache_flushing_handler, 28); - eit_vector[29] = 0xff000000UL; - eit_vector[30] = 0xff000000UL; - eit_vector[31] = 0xff000000UL; + eit_vector[29] = BRA_INSN(ill_trap, 29); + eit_vector[30] = BRA_INSN(ill_trap, 30); + eit_vector[31] = BRA_INSN(ill_trap, 31); eit_vector[32] = BRA_INSN(ei_handler, 32); eit_vector[64] = BRA_INSN(pie_handler, 64); #ifdef CONFIG_MMU @@ -286,7 +285,8 @@ asmlinkage void do_##name(struct pt_regs * regs, long error_code) \ DO_ERROR( 1, SIGTRAP, "debug trap", debug_trap) DO_ERROR_INFO(0x20, SIGILL, "reserved instruction ", rie_handler, ILL_ILLOPC, regs->bpc) -DO_ERROR_INFO(0x100, SIGILL, "privilege instruction", pie_handler, ILL_PRVOPC, regs->bpc) +DO_ERROR_INFO(0x100, SIGILL, "privileged instruction", pie_handler, ILL_PRVOPC, regs->bpc) +DO_ERROR_INFO(-1, SIGILL, "illegal trap", ill_trap, ILL_ILLTRP, regs->bpc) extern int handle_unaligned_access(unsigned long, struct pt_regs *); @@ -329,4 +329,3 @@ asmlinkage void do_alignment_check(struct pt_regs *regs, long error_code) set_fs(oldfs); } } - diff --git a/arch/ppc/kernel/cputable.c b/arch/ppc/kernel/cputable.c index 546e1ea4caf..6b76cf58d9e 100644 --- a/arch/ppc/kernel/cputable.c +++ b/arch/ppc/kernel/cputable.c @@ -91,7 +91,7 @@ struct cpu_spec cpu_specs[] = { .cpu_features = CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE, .cpu_user_features = COMMON_PPC | PPC_FEATURE_601_INSTR | - PPC_FEATURE_UNIFIED_CACHE, + PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB, .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_601 @@ -745,7 +745,8 @@ struct cpu_spec cpu_specs[] = { .cpu_name = "403GCX", .cpu_features = CPU_FTR_SPLIT_ID_CACHE | CPU_FTR_USE_TB, - .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB, .icache_bsize = 16, .dcache_bsize = 16, }, diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c index b566d982806..8edee806dae 100644 --- a/arch/ppc/kernel/dma-mapping.c +++ b/arch/ppc/kernel/dma-mapping.c @@ -401,10 +401,10 @@ EXPORT_SYMBOL(__dma_sync); static inline void __dma_sync_page_highmem(struct page *page, unsigned long offset, size_t size, int direction) { - size_t seg_size = min((size_t)PAGE_SIZE, size) - offset; + size_t seg_size = min((size_t)(PAGE_SIZE - offset), size); size_t cur_size = seg_size; unsigned long flags, start, seg_offset = offset; - int nr_segs = PAGE_ALIGN(size + (PAGE_SIZE - offset))/PAGE_SIZE; + int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE; int seg_nr = 0; local_irq_save(flags); diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c index 778ce4fec36..efb819f9490 100644 --- a/arch/ppc/platforms/pmac_time.c +++ b/arch/ppc/platforms/pmac_time.c @@ -195,7 +195,7 @@ via_calibrate_decr(void) ; dend = get_dec(); - tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100)); + tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", diff --git a/arch/ppc64/kernel/bpa_iommu.c b/arch/ppc64/kernel/bpa_iommu.c index 507eb9d0223..5f2460090e0 100644 --- a/arch/ppc64/kernel/bpa_iommu.c +++ b/arch/ppc64/kernel/bpa_iommu.c @@ -310,7 +310,7 @@ static void bpa_map_iommu(void) static void *bpa_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret; diff --git a/arch/ppc64/kernel/dma.c b/arch/ppc64/kernel/dma.c index 4da8e31b2b6..7c3419656cc 100644 --- a/arch/ppc64/kernel/dma.c +++ b/arch/ppc64/kernel/dma.c @@ -53,7 +53,7 @@ int dma_set_mask(struct device *dev, u64 dma_mask) EXPORT_SYMBOL(dma_set_mask); void *dma_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { struct dma_mapping_ops *dma_ops = get_dma_ops(dev); diff --git a/arch/ppc64/kernel/iommu.c b/arch/ppc64/kernel/iommu.c index 9032b6bfe03..4d9b4388918 100644 --- a/arch/ppc64/kernel/iommu.c +++ b/arch/ppc64/kernel/iommu.c @@ -519,7 +519,7 @@ void iommu_unmap_single(struct iommu_table *tbl, dma_addr_t dma_handle, * to the dma address (mapping) of the first page. */ void *iommu_alloc_coherent(struct iommu_table *tbl, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret = NULL; dma_addr_t mapping; diff --git a/arch/ppc64/kernel/module.c b/arch/ppc64/kernel/module.c index c683bf88e69..928b8581fcb 100644 --- a/arch/ppc64/kernel/module.c +++ b/arch/ppc64/kernel/module.c @@ -341,6 +341,19 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, *(unsigned long *)location = my_r2(sechdrs, me); break; + case R_PPC64_TOC16: + /* Subtact TOC pointer */ + value -= my_r2(sechdrs, me); + if (value + 0x8000 > 0xffff) { + printk("%s: bad TOC16 relocation (%lu)\n", + me->name, value); + return -ENOEXEC; + } + *((uint16_t *) location) + = (*((uint16_t *) location) & ~0xffff) + | (value & 0xffff); + break; + case R_PPC64_TOC16_DS: /* Subtact TOC pointer */ value -= my_r2(sechdrs, me); diff --git a/arch/ppc64/kernel/pSeries_pci.c b/arch/ppc64/kernel/pSeries_pci.c index 1f5f141fb7a..928f8febdb3 100644 --- a/arch/ppc64/kernel/pSeries_pci.c +++ b/arch/ppc64/kernel/pSeries_pci.c @@ -32,7 +32,7 @@ #include "pci.h" -static int __initdata s7a_workaround = -1; +static int __devinitdata s7a_workaround = -1; #if 0 void pcibios_name_device(struct pci_dev *dev) @@ -60,7 +60,7 @@ void pcibios_name_device(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_name_device); #endif -static void __init check_s7a(void) +static void __devinit check_s7a(void) { struct device_node *root; char *model; diff --git a/arch/ppc64/kernel/pci_direct_iommu.c b/arch/ppc64/kernel/pci_direct_iommu.c index b8f7f58824f..54055c81017 100644 --- a/arch/ppc64/kernel/pci_direct_iommu.c +++ b/arch/ppc64/kernel/pci_direct_iommu.c @@ -31,7 +31,7 @@ #include "pci.h" static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { void *ret; diff --git a/arch/ppc64/kernel/pci_iommu.c b/arch/ppc64/kernel/pci_iommu.c index 14647e09c9c..d9e33b7d420 100644 --- a/arch/ppc64/kernel/pci_iommu.c +++ b/arch/ppc64/kernel/pci_iommu.c @@ -76,7 +76,7 @@ static inline struct iommu_table *devnode_table(struct device *dev) * to the dma address (mapping) of the first page. */ static void *pci_iommu_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(devnode_table(hwdev), size, dma_handle, flag); diff --git a/arch/ppc64/kernel/vio.c b/arch/ppc64/kernel/vio.c index c90e1dd875c..0e555b7a658 100644 --- a/arch/ppc64/kernel/vio.c +++ b/arch/ppc64/kernel/vio.c @@ -218,7 +218,7 @@ static void vio_unmap_sg(struct device *dev, struct scatterlist *sglist, } static void *vio_alloc_coherent(struct device *dev, size_t size, - dma_addr_t *dma_handle, unsigned int __nocast flag) + dma_addr_t *dma_handle, gfp_t flag) { return iommu_alloc_coherent(to_vio_dev(dev)->iommu_table, size, dma_handle, flag); diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 56a39d69e08..5ecefc02896 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -22,6 +22,7 @@ #include <linux/time.h> #include <linux/timex.h> #include <linux/sched.h> +#include <linux/module.h> #include <asm/atomic.h> #include <asm/processor.h> @@ -39,6 +40,8 @@ struct sh_cpuinfo cpu_data[NR_CPUS]; extern void per_cpu_trap_init(void); cpumask_t cpu_possible_map; +EXPORT_SYMBOL(cpu_possible_map); + cpumask_t cpu_online_map; static atomic_t cpus_booted = ATOMIC_INIT(0); diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index aba05394d30..6537445dac0 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -25,62 +25,6 @@ source "init/Kconfig" menu "General machine setup" -config VT - bool - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-<function key>. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config VT_CONSOLE - bool - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - default y - config SMP bool "Symmetric multi-processing support (does not work on sun4/sun4c)" depends on BROKEN diff --git a/arch/sparc64/kernel/dtlb_base.S b/arch/sparc64/kernel/dtlb_base.S index 702d349c1e8..6528786840c 100644 --- a/arch/sparc64/kernel/dtlb_base.S +++ b/arch/sparc64/kernel/dtlb_base.S @@ -53,19 +53,18 @@ * be guaranteed to be 0 ... mmu_context.h does guarantee this * by only using 10 bits in the hwcontext value. */ -#define CREATE_VPTE_OFFSET1(r1, r2) +#define CREATE_VPTE_OFFSET1(r1, r2) nop #define CREATE_VPTE_OFFSET2(r1, r2) \ srax r1, 10, r2 -#define CREATE_VPTE_NOP nop #else #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, PAGE_SHIFT, r2 #define CREATE_VPTE_OFFSET2(r1, r2) \ sllx r2, 3, r2 -#define CREATE_VPTE_NOP #endif /* DTLB ** ICACHE line 1: Quick user TLB misses */ + mov TLB_SFSR, %g1 ldxa [%g1 + %g1] ASI_DMMU, %g4 ! Get TAG_ACCESS andcc %g4, TAG_CONTEXT_BITS, %g0 ! From Nucleus? from_tl1_trap: @@ -74,18 +73,16 @@ from_tl1_trap: be,pn %xcc, kvmap ! Yep, special processing CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset cmp %g5, 4 ! Last trap level? - be,pn %xcc, longpath ! Yep, cannot risk VPTE miss - nop ! delay slot /* DTLB ** ICACHE line 2: User finish + quick kernel TLB misses */ + be,pn %xcc, longpath ! Yep, cannot risk VPTE miss + nop ! delay slot ldxa [%g3 + %g6] ASI_S, %g5 ! Load VPTE 1: brgez,pn %g5, longpath ! Invalid, branch out nop ! Delay-slot 9: stxa %g5, [%g0] ASI_DTLB_DATA_IN ! Reload TLB retry ! Trap return nop - nop - nop /* DTLB ** ICACHE line 3: winfixups+real_faults */ longpath: @@ -106,8 +103,7 @@ longpath: nop nop nop - CREATE_VPTE_NOP + nop #undef CREATE_VPTE_OFFSET1 #undef CREATE_VPTE_OFFSET2 -#undef CREATE_VPTE_NOP diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S index d848bb7374b..e0a92016260 100644 --- a/arch/sparc64/kernel/dtlb_prot.S +++ b/arch/sparc64/kernel/dtlb_prot.S @@ -14,14 +14,14 @@ */ /* PROT ** ICACHE line 1: User DTLB protection trap */ - stxa %g0, [%g1] ASI_DMMU ! Clear SFSR FaultValid bit - membar #Sync ! Synchronize ASI stores - rdpr %pstate, %g5 ! Move into alternate globals + mov TLB_SFSR, %g1 + stxa %g0, [%g1] ASI_DMMU ! Clear FaultValid bit + membar #Sync ! Synchronize stores + rdpr %pstate, %g5 ! Move into alt-globals wrpr %g5, PSTATE_AG|PSTATE_MG, %pstate - rdpr %tl, %g1 ! Need to do a winfixup? + rdpr %tl, %g1 ! Need a winfixup? cmp %g1, 1 ! Trap level >1? - mov TLB_TAG_ACCESS, %g4 ! Prepare reload of vaddr - nop + mov TLB_TAG_ACCESS, %g4 ! For reload of vaddr /* PROT ** ICACHE line 2: More real fault processing */ bgu,pn %xcc, winfix_trampoline ! Yes, perform winfixup diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 2879b107292..11a848402fb 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -33,7 +33,7 @@ /* This is trivial with the new code... */ .globl do_fpdis do_fpdis: - sethi %hi(TSTATE_PEF), %g4 ! IEU0 + sethi %hi(TSTATE_PEF), %g4 rdpr %tstate, %g5 andcc %g5, %g4, %g0 be,pt %xcc, 1f @@ -50,18 +50,18 @@ do_fpdis: add %g0, %g0, %g0 ba,a,pt %xcc, rtrap_clr_l6 -1: ldub [%g6 + TI_FPSAVED], %g5 ! Load Group - wr %g0, FPRS_FEF, %fprs ! LSU Group+4bubbles - andcc %g5, FPRS_FEF, %g0 ! IEU1 Group - be,a,pt %icc, 1f ! CTI - clr %g7 ! IEU0 - ldx [%g6 + TI_GSR], %g7 ! Load Group -1: andcc %g5, FPRS_DL, %g0 ! IEU1 - bne,pn %icc, 2f ! CTI - fzero %f0 ! FPA - andcc %g5, FPRS_DU, %g0 ! IEU1 Group - bne,pn %icc, 1f ! CTI - fzero %f2 ! FPA +1: ldub [%g6 + TI_FPSAVED], %g5 + wr %g0, FPRS_FEF, %fprs + andcc %g5, FPRS_FEF, %g0 + be,a,pt %icc, 1f + clr %g7 + ldx [%g6 + TI_GSR], %g7 +1: andcc %g5, FPRS_DL, %g0 + bne,pn %icc, 2f + fzero %f0 + andcc %g5, FPRS_DU, %g0 + bne,pn %icc, 1f + fzero %f2 faddd %f0, %f2, %f4 fmuld %f0, %f2, %f6 faddd %f0, %f2, %f8 @@ -97,15 +97,17 @@ do_fpdis: faddd %f0, %f2, %f4 fmuld %f0, %f2, %f6 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_1: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS + 0xc0, %g2 faddd %f0, %f2, %f8 fmuld %f0, %f2, %f10 - ldda [%g1] ASI_BLK_S, %f32 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f32 ldda [%g2] ASI_BLK_S, %f48 + membar #Sync faddd %f0, %f2, %f12 fmuld %f0, %f2, %f14 faddd %f0, %f2, %f16 @@ -116,7 +118,6 @@ cplus_fptrap_insn_1: fmuld %f0, %f2, %f26 faddd %f0, %f2, %f28 fmuld %f0, %f2, %f30 - membar #Sync b,pt %xcc, fpdis_exit nop 2: andcc %g5, FPRS_DU, %g0 @@ -126,15 +127,17 @@ cplus_fptrap_insn_1: fzero %f34 ldxa [%g3] ASI_DMMU, %g5 add %g6, TI_FPREGS, %g1 -cplus_fptrap_insn_2: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS + 0x40, %g2 faddd %f32, %f34, %f36 fmuld %f32, %f34, %f38 - ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f0 ldda [%g2] ASI_BLK_S, %f16 + membar #Sync faddd %f32, %f34, %f40 fmuld %f32, %f34, %f42 faddd %f32, %f34, %f44 @@ -147,18 +150,18 @@ cplus_fptrap_insn_2: fmuld %f32, %f34, %f58 faddd %f32, %f34, %f60 fmuld %f32, %f34, %f62 - membar #Sync ba,pt %xcc, fpdis_exit nop 3: mov SECONDARY_CONTEXT, %g3 add %g6, TI_FPREGS, %g1 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_3: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync mov 0x40, %g2 - ldda [%g1] ASI_BLK_S, %f0 ! grrr, where is ASI_BLK_NUCLEUS 8-( + membar #Sync + ldda [%g1] ASI_BLK_S, %f0 ldda [%g1 + %g2] ASI_BLK_S, %f16 add %g1, 0x80, %g1 ldda [%g1] ASI_BLK_S, %f32 @@ -319,8 +322,8 @@ do_fptrap_after_fsr: stx %g3, [%g6 + TI_GSR] mov SECONDARY_CONTEXT, %g3 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_4: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS, %g2 @@ -341,33 +344,6 @@ cplus_fptrap_insn_4: ba,pt %xcc, etrap wr %g0, 0, %fprs -cplus_fptrap_1: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - - .globl cheetah_plus_patch_fpdis -cheetah_plus_patch_fpdis: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_fptrap_1), %o0 - lduw [%o0 + %lo(cplus_fptrap_1)], %o1 - - set cplus_fptrap_insn_1, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_2, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_3, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_4, %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop - /* The registers for cross calls will be: * * DATA 0: [low 32-bits] Address of function to call, jmp to this diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 50d2af1d98a..0d8eba21111 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -68,12 +68,8 @@ etrap_irq: wrpr %g3, 0, %otherwin wrpr %g2, 0, %wstate -cplus_etrap_insn_1: - sethi %hi(0), %g3 - sllx %g3, 32, %g3 -cplus_etrap_insn_2: - sethi %hi(0), %g2 - or %g3, %g2, %g3 + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU flush %l6 wr %g0, ASI_AIUS, %asi @@ -215,12 +211,8 @@ scetrap: rdpr %pil, %g2 mov PRIMARY_CONTEXT, %l4 wrpr %g3, 0, %otherwin wrpr %g2, 0, %wstate -cplus_etrap_insn_3: - sethi %hi(0), %g3 - sllx %g3, 32, %g3 -cplus_etrap_insn_4: - sethi %hi(0), %g2 - or %g3, %g2, %g3 + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU flush %l6 @@ -264,38 +256,3 @@ cplus_etrap_insn_4: #undef TASK_REGOFF #undef ETRAP_PSTATE1 - -cplus_einsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 -cplus_einsn_2: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - - .globl cheetah_plus_patch_etrap -cheetah_plus_patch_etrap: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_einsn_1), %o0 - sethi %hi(cplus_etrap_insn_1), %o2 - lduw [%o0 + %lo(cplus_einsn_1)], %o1 - or %o2, %lo(cplus_etrap_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - sethi %hi(cplus_etrap_insn_3), %o2 - or %o2, %lo(cplus_etrap_insn_3), %o2 - stw %o1, [%o2] - flush %o2 - - sethi %hi(cplus_einsn_2), %o0 - sethi %hi(cplus_etrap_insn_2), %o2 - lduw [%o0 + %lo(cplus_einsn_2)], %o1 - or %o2, %lo(cplus_etrap_insn_2), %o2 - stw %o1, [%o2] - flush %o2 - sethi %hi(cplus_etrap_insn_4), %o2 - or %o2, %lo(cplus_etrap_insn_4), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 89406f9649a..b49dcd4504b 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -28,19 +28,14 @@ #include <asm/mmu.h> /* This section from from _start to sparc64_boot_end should fit into - * 0x0000.0000.0040.4000 to 0x0000.0000.0040.8000 and will be sharing space - * with bootup_user_stack, which is from 0x0000.0000.0040.4000 to - * 0x0000.0000.0040.6000 and empty_bad_page, which is from - * 0x0000.0000.0040.6000 to 0x0000.0000.0040.8000. + * 0x0000000000404000 to 0x0000000000408000. */ - .text .globl start, _start, stext, _stext _start: start: _stext: stext: -bootup_user_stack: ! 0x0000000000404000 b sparc64_boot flushw /* Flush register file. */ @@ -191,8 +186,9 @@ prom_boot_mapping_phys_low: stx %l3, [%sp + 2047 + 128 + 0x10] ! num_rets, 5 stx %l2, [%sp + 2047 + 128 + 0x18] ! arg1: "translate" stx %l5, [%sp + 2047 + 128 + 0x20] ! arg2: prom_mmu_ihandle_cache - srlx %l0, 22, %l3 - sllx %l3, 22, %l3 + /* PAGE align */ + srlx %l0, 13, %l3 + sllx %l3, 13, %l3 stx %l3, [%sp + 2047 + 128 + 0x28] ! arg3: vaddr, our PC stx %g0, [%sp + 2047 + 128 + 0x30] ! res1 stx %g0, [%sp + 2047 + 128 + 0x38] ! res2 @@ -211,6 +207,9 @@ prom_boot_mapping_phys_low: ldx [%sp + 2047 + 128 + 0x48], %l2 ! physaddr high stx %l2, [%l4 + 0x0] ldx [%sp + 2047 + 128 + 0x50], %l3 ! physaddr low + /* 4MB align */ + srlx %l3, 22, %l3 + sllx %l3, 22, %l3 stx %l3, [%l4 + 0x8] /* Leave service as-is, "call-method" */ @@ -325,23 +324,7 @@ cheetah_tlb_fixup: 1: sethi %hi(tlb_type), %g1 stw %g2, [%g1 + %lo(tlb_type)] - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f) - ba,pt %xcc, 2f - nop - -1: /* Patch context register writes to support nucleus page - * size correctly. - */ - call cheetah_plus_patch_etrap - nop - call cheetah_plus_patch_rtrap - nop - call cheetah_plus_patch_fpdis - nop - call cheetah_plus_patch_winfixup - nop - -2: /* Patch copy/page operations to cheetah optimized versions. */ + /* Patch copy/page operations to cheetah optimized versions. */ call cheetah_patch_copyops nop call cheetah_patch_copy_page @@ -398,32 +381,78 @@ tlb_fixup_done: nop /* Not reached... */ -/* IMPORTANT NOTE: Whenever making changes here, check - * trampoline.S as well. -jj */ - .globl setup_tba -setup_tba: /* i0 = is_starfire */ - save %sp, -160, %sp + /* This is meant to allow the sharing of this code between + * boot processor invocation (via setup_tba() below) and + * secondary processor startup (via trampoline.S). The + * former does use this code, the latter does not yet due + * to some complexities. That should be fixed up at some + * point. + * + * There used to be enormous complexity wrt. transferring + * over from the firwmare's trap table to the Linux kernel's. + * For example, there was a chicken & egg problem wrt. building + * the OBP page tables, yet needing to be on the Linux kernel + * trap table (to translate PAGE_OFFSET addresses) in order to + * do that. + * + * We now handle OBP tlb misses differently, via linear lookups + * into the prom_trans[] array. So that specific problem no + * longer exists. Yet, unfortunately there are still some issues + * preventing trampoline.S from using this code... ho hum. + */ + .globl setup_trap_table +setup_trap_table: + save %sp, -192, %sp - rdpr %tba, %g7 - sethi %hi(prom_tba), %o1 - or %o1, %lo(prom_tba), %o1 - stx %g7, [%o1] + /* Force interrupts to be disabled. */ + rdpr %pstate, %o1 + andn %o1, PSTATE_IE, %o1 + wrpr %o1, 0x0, %pstate + wrpr %g0, 15, %pil + + /* Make the firmware call to jump over to the Linux trap table. */ + call prom_set_trap_table + sethi %hi(sparc64_ttable_tl0), %o0 + + /* Start using proper page size encodings in ctx register. */ + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 + mov PRIMARY_CONTEXT, %g1 + stxa %g2, [%g1] ASI_DMMU + membar #Sync + + /* The Linux trap handlers expect various trap global registers + * to be setup with some fixed values. So here we set these + * up very carefully. These globals are: + * + * Alternate Globals (PSTATE_AG): + * + * %g6 --> current_thread_info() + * + * MMU Globals (PSTATE_MG): + * + * %g1 --> TLB_SFSR + * %g2 --> ((_PAGE_VALID | _PAGE_SZ4MB | + * _PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) + * ^ 0xfffff80000000000) + * (this %g2 value is used for computing the PAGE_OFFSET kernel + * TLB entries quickly, the virtual address of the fault XOR'd + * with this %g2 value is the PTE to load into the TLB) + * %g3 --> VPTE_BASE_CHEETAH or VPTE_BASE_SPITFIRE + * + * Interrupt Globals (PSTATE_IG, setup by init_irqwork_curcpu()): + * + * %g6 --> __irq_work[smp_processor_id()] + */ - /* Setup "Linux" globals 8-) */ rdpr %pstate, %o1 mov %g6, %o2 - wrpr %o1, (PSTATE_AG|PSTATE_IE), %pstate - sethi %hi(sparc64_ttable_tl0), %g1 - wrpr %g1, %tba + wrpr %o1, PSTATE_AG, %pstate mov %o2, %g6 - /* Set up MMU globals */ - wrpr %o1, (PSTATE_MG|PSTATE_IE), %pstate - - /* Set fixed globals used by dTLB miss handler. */ #define KERN_HIGHBITS ((_PAGE_VALID|_PAGE_SZ4MB)^0xfffff80000000000) #define KERN_LOWBITS (_PAGE_CP | _PAGE_CV | _PAGE_P | _PAGE_W) - + wrpr %o1, PSTATE_MG, %pstate mov TSB_REG, %g1 stxa %g0, [%g1] ASI_DMMU membar #Sync @@ -435,17 +464,17 @@ setup_tba: /* i0 = is_starfire */ sllx %g2, 32, %g2 or %g2, KERN_LOWBITS, %g2 - BRANCH_IF_ANY_CHEETAH(g3,g7,cheetah_vpte_base) - ba,pt %xcc, spitfire_vpte_base + BRANCH_IF_ANY_CHEETAH(g3,g7,8f) + ba,pt %xcc, 9f nop -cheetah_vpte_base: +8: sethi %uhi(VPTE_BASE_CHEETAH), %g3 or %g3, %ulo(VPTE_BASE_CHEETAH), %g3 ba,pt %xcc, 2f sllx %g3, 32, %g3 -spitfire_vpte_base: +9: sethi %uhi(VPTE_BASE_SPITFIRE), %g3 or %g3, %ulo(VPTE_BASE_SPITFIRE), %g3 sllx %g3, 32, %g3 @@ -471,48 +500,55 @@ spitfire_vpte_base: sllx %o2, 32, %o2 wr %o2, %asr25 - /* Ok, we're done setting up all the state our trap mechanims needs, - * now get back into normal globals and let the PROM know what is up. - */ 2: wrpr %g0, %g0, %wstate - wrpr %o1, PSTATE_IE, %pstate + wrpr %o1, 0x0, %pstate call init_irqwork_curcpu nop - call prom_set_trap_table - sethi %hi(sparc64_ttable_tl0), %o0 - - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f) - ba,pt %xcc, 2f - nop - -1: /* Start using proper page size encodings in ctx register. */ - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 - mov PRIMARY_CONTEXT, %g1 - sllx %g3, 32, %g3 - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - or %g3, %g2, %g3 - stxa %g3, [%g1] ASI_DMMU - membar #Sync - -2: + /* Now we can turn interrupts back on. */ rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate + wrpr %g0, 0x0, %pil + + ret + restore + + .globl setup_tba +setup_tba: /* i0 = is_starfire */ + save %sp, -192, %sp + + /* The boot processor is the only cpu which invokes this + * routine, the other cpus set things up via trampoline.S. + * So save the OBP trap table address here. + */ + rdpr %tba, %g7 + sethi %hi(prom_tba), %o1 + or %o1, %lo(prom_tba), %o1 + stx %g7, [%o1] + + call setup_trap_table + nop ret restore +sparc64_boot_end: + +#include "systbls.S" +#include "ktlb.S" +#include "etrap.S" +#include "rtrap.S" +#include "winfixup.S" +#include "entry.S" /* - * The following skips make sure the trap table in ttable.S is aligned + * The following skip makes sure the trap table in ttable.S is aligned * on a 32K boundary as required by the v9 specs for TBA register. */ -sparc64_boot_end: - .skip 0x2000 + _start - sparc64_boot_end -bootup_user_stack_end: - .skip 0x2000 +1: + .skip 0x4000 + _start - 1b #ifdef CONFIG_SBUS /* This is just a hack to fool make depend config.h discovering @@ -524,15 +560,6 @@ bootup_user_stack_end: ! 0x0000000000408000 #include "ttable.S" -#include "systbls.S" -#include "ktlb.S" -#include "etrap.S" -#include "rtrap.S" -#include "winfixup.S" -#include "entry.S" - - /* This is just anal retentiveness on my part... */ - .align 16384 .data .align 8 diff --git a/arch/sparc64/kernel/irq.c b/arch/sparc64/kernel/irq.c index c9b69167632..233526ba3ab 100644 --- a/arch/sparc64/kernel/irq.c +++ b/arch/sparc64/kernel/irq.c @@ -27,6 +27,7 @@ #include <asm/atomic.h> #include <asm/system.h> #include <asm/irq.h> +#include <asm/io.h> #include <asm/sbus.h> #include <asm/iommu.h> #include <asm/upa.h> diff --git a/arch/sparc64/kernel/itlb_base.S b/arch/sparc64/kernel/itlb_base.S index b5e32dfa4fb..4951ff8f687 100644 --- a/arch/sparc64/kernel/itlb_base.S +++ b/arch/sparc64/kernel/itlb_base.S @@ -15,14 +15,12 @@ */ #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, 10, r2 -#define CREATE_VPTE_OFFSET2(r1, r2) -#define CREATE_VPTE_NOP nop +#define CREATE_VPTE_OFFSET2(r1, r2) nop #else /* PAGE_SHIFT */ #define CREATE_VPTE_OFFSET1(r1, r2) \ srax r1, PAGE_SHIFT, r2 #define CREATE_VPTE_OFFSET2(r1, r2) \ sllx r2, 3, r2 -#define CREATE_VPTE_NOP #endif /* PAGE_SHIFT */ @@ -36,6 +34,7 @@ */ /* ITLB ** ICACHE line 1: Quick user TLB misses */ + mov TLB_SFSR, %g1 ldxa [%g1 + %g1] ASI_IMMU, %g4 ! Get TAG_ACCESS CREATE_VPTE_OFFSET1(%g4, %g6) ! Create VPTE offset CREATE_VPTE_OFFSET2(%g4, %g6) ! Create VPTE offset @@ -43,41 +42,38 @@ 1: brgez,pn %g5, 3f ! Not valid, branch out sethi %hi(_PAGE_EXEC), %g4 ! Delay-slot andcc %g5, %g4, %g0 ! Executable? + +/* ITLB ** ICACHE line 2: Real faults */ be,pn %xcc, 3f ! Nope, branch. nop ! Delay-slot 2: stxa %g5, [%g0] ASI_ITLB_DATA_IN ! Load PTE into TLB retry ! Trap return -3: rdpr %pstate, %g4 ! Move into alternate globals - -/* ITLB ** ICACHE line 2: Real faults */ +3: rdpr %pstate, %g4 ! Move into alt-globals wrpr %g4, PSTATE_AG|PSTATE_MG, %pstate rdpr %tpc, %g5 ! And load faulting VA mov FAULT_CODE_ITLB, %g4 ! It was read from ITLB -sparc64_realfault_common: ! Called by TL0 dtlb_miss too + +/* ITLB ** ICACHE line 3: Finish faults */ +sparc64_realfault_common: ! Called by dtlb_miss stb %g4, [%g6 + TI_FAULT_CODE] stx %g5, [%g6 + TI_FAULT_ADDR] ba,pt %xcc, etrap ! Save state 1: rd %pc, %g7 ! ... - nop - -/* ITLB ** ICACHE line 3: Finish faults + window fixups */ call do_sparc64_fault ! Call fault handler add %sp, PTREGS_OFF, %o0! Compute pt_regs arg ba,pt %xcc, rtrap_clr_l6 ! Restore cpu state nop + +/* ITLB ** ICACHE line 4: Window fixups */ winfix_trampoline: rdpr %tpc, %g3 ! Prepare winfixup TNPC - or %g3, 0x7c, %g3 ! Compute offset to branch + or %g3, 0x7c, %g3 ! Compute branch offset wrpr %g3, %tnpc ! Write it into TNPC done ! Do it to it - -/* ITLB ** ICACHE line 4: Unused... */ nop nop nop nop - CREATE_VPTE_NOP #undef CREATE_VPTE_OFFSET1 #undef CREATE_VPTE_OFFSET2 -#undef CREATE_VPTE_NOP diff --git a/arch/sparc64/kernel/ktlb.S b/arch/sparc64/kernel/ktlb.S index 7796b37f478..d9244d3c9f7 100644 --- a/arch/sparc64/kernel/ktlb.S +++ b/arch/sparc64/kernel/ktlb.S @@ -58,9 +58,6 @@ vpte_noent: done vpte_insn_obp: - sethi %hi(prom_pmd_phys), %g5 - ldx [%g5 + %lo(prom_pmd_phys)], %g5 - /* Behave as if we are at TL0. */ wrpr %g0, 1, %tl rdpr %tpc, %g4 /* Find original faulting iaddr */ @@ -71,58 +68,57 @@ vpte_insn_obp: mov TLB_SFSR, %g1 stxa %g4, [%g1 + %g1] ASI_IMMU - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop - - /* TLB load and return from trap. */ + sethi %hi(prom_trans), %g5 + or %g5, %lo(prom_trans), %g5 + +1: ldx [%g5 + 0x00], %g6 ! base + brz,a,pn %g6, longpath ! no more entries, fail + mov TLB_SFSR, %g1 ! and restore %g1 + ldx [%g5 + 0x08], %g1 ! len + add %g6, %g1, %g1 ! end + cmp %g6, %g4 + bgu,pt %xcc, 2f + cmp %g4, %g1 + bgeu,pt %xcc, 2f + ldx [%g5 + 0x10], %g1 ! PTE + + /* TLB load, restore %g1, and return from trap. */ + sub %g4, %g6, %g6 + add %g1, %g6, %g5 + mov TLB_SFSR, %g1 stxa %g5, [%g0] ASI_ITLB_DATA_IN retry -kvmap_do_obp: - sethi %hi(prom_pmd_phys), %g5 - ldx [%g5 + %lo(prom_pmd_phys)], %g5 - - /* Get PMD offset. */ - srlx %g4, 23, %g6 - and %g6, 0x7ff, %g6 - sllx %g6, 2, %g6 - - /* Load PMD, is it valid? */ - lduwa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brz,pn %g5, longpath - sllx %g5, 11, %g5 - - /* Get PTE offset. */ - srlx %g4, 13, %g6 - and %g6, 0x3ff, %g6 - sllx %g6, 3, %g6 - - /* Load PTE. */ - ldxa [%g5 + %g6] ASI_PHYS_USE_EC, %g5 - brgez,pn %g5, longpath - nop +2: ba,pt %xcc, 1b + add %g5, (3 * 8), %g5 ! next entry - /* TLB load and return from trap. */ +kvmap_do_obp: + sethi %hi(prom_trans), %g5 + or %g5, %lo(prom_trans), %g5 + srlx %g4, 13, %g4 + sllx %g4, 13, %g4 + +1: ldx [%g5 + 0x00], %g6 ! base + brz,a,pn %g6, longpath ! no more entries, fail + mov TLB_SFSR, %g1 ! and restore %g1 + ldx [%g5 + 0x08], %g1 ! len + add %g6, %g1, %g1 ! end + cmp %g6, %g4 + bgu,pt %xcc, 2f + cmp %g4, %g1 + bgeu,pt %xcc, 2f + ldx [%g5 + 0x10], %g1 ! PTE + + /* TLB load, restore %g1, and return from trap. */ + sub %g4, %g6, %g6 + add %g1, %g6, %g5 + mov TLB_SFSR, %g1 stxa %g5, [%g0] ASI_DTLB_DATA_IN retry +2: ba,pt %xcc, 1b + add %g5, (3 * 8), %g5 ! next entry + /* * On a first level data miss, check whether this is to the OBP range (note * that such accesses can be made by prom, as well as by kernel using diff --git a/arch/sparc64/kernel/power.c b/arch/sparc64/kernel/power.c index 946cee0257e..9e8362ea310 100644 --- a/arch/sparc64/kernel/power.c +++ b/arch/sparc64/kernel/power.c @@ -17,6 +17,7 @@ #include <asm/system.h> #include <asm/ebus.h> +#include <asm/isa.h> #include <asm/auxio.h> #include <linux/unistd.h> @@ -100,46 +101,83 @@ again: return 0; } -static int __init has_button_interrupt(struct linux_ebus_device *edev) +static int __init has_button_interrupt(unsigned int irq, int prom_node) { - if (edev->irqs[0] == PCI_IRQ_NONE) + if (irq == PCI_IRQ_NONE) return 0; - if (!prom_node_has_property(edev->prom_node, "button")) + if (!prom_node_has_property(prom_node, "button")) return 0; return 1; } -void __init power_init(void) +static int __init power_probe_ebus(struct resource **resp, unsigned int *irq_p, int *prom_node_p) { struct linux_ebus *ebus; struct linux_ebus_device *edev; + + for_each_ebus(ebus) { + for_each_ebusdev(edev, ebus) { + if (!strcmp(edev->prom_name, "power")) { + *resp = &edev->resource[0]; + *irq_p = edev->irqs[0]; + *prom_node_p = edev->prom_node; + return 0; + } + } + } + return -ENODEV; +} + +static int __init power_probe_isa(struct resource **resp, unsigned int *irq_p, int *prom_node_p) +{ + struct sparc_isa_bridge *isa_bus; + struct sparc_isa_device *isa_dev; + + for_each_isa(isa_bus) { + for_each_isadev(isa_dev, isa_bus) { + if (!strcmp(isa_dev->prom_name, "power")) { + *resp = &isa_dev->resource; + *irq_p = isa_dev->irq; + *prom_node_p = isa_dev->prom_node; + return 0; + } + } + } + return -ENODEV; +} + +void __init power_init(void) +{ + struct resource *res = NULL; + unsigned int irq; + int prom_node; static int invoked; if (invoked) return; invoked = 1; - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->prom_name, "power")) - goto found; - } - } + if (!power_probe_ebus(&res, &irq, &prom_node)) + goto found; + + if (!power_probe_isa(&res, &irq, &prom_node)) + goto found; + return; found: - power_reg = ioremap(edev->resource[0].start, 0x4); + power_reg = ioremap(res->start, 0x4); printk("power: Control reg at %p ... ", power_reg); poweroff_method = machine_halt; /* able to use the standard halt */ - if (has_button_interrupt(edev)) { + if (has_button_interrupt(irq, prom_node)) { if (kernel_thread(powerd, NULL, CLONE_FS) < 0) { printk("Failed to start power daemon.\n"); return; } printk("powerd running.\n"); - if (request_irq(edev->irqs[0], + if (request_irq(irq, power_handler, SA_SHIRQ, "power", NULL) < 0) printk("power: Error, cannot register IRQ handler.\n"); } else { diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index fafd227735f..090dcca00d2 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -256,9 +256,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 brnz,pn %l3, kern_rtt mov PRIMARY_CONTEXT, %l7 ldxa [%l7 + %l7] ASI_DMMU, %l0 -cplus_rtrap_insn_1: - sethi %hi(0), %l1 - sllx %l1, 32, %l1 + sethi %hi(sparc64_kern_pri_nuc_bits), %l1 + ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1 or %l0, %l1, %l0 stxa %l0, [%l7] ASI_DMMU flush %g6 @@ -313,53 +312,36 @@ kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5 wr %g1, FPRS_FEF, %fprs ldx [%o1 + %o5], %g1 add %g6, TI_XFSR, %o1 - membar #StoreLoad | #LoadLoad sll %o0, 8, %o2 add %g6, TI_FPREGS, %o3 brz,pn %l6, 1f add %g6, TI_FPREGS+0x40, %o4 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f0 ldda [%o4 + %o2] ASI_BLK_P, %f16 + membar #Sync 1: andcc %l2, FPRS_DU, %g0 be,pn %icc, 1f wr %g1, 0, %gsr add %o2, 0x80, %o2 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 - 1: membar #Sync ldx [%o1 + %o5], %fsr 2: stb %l5, [%g6 + TI_FPDEPTH] ba,pt %xcc, rt_continue nop 5: wr %g0, FPRS_FEF, %fprs - membar #StoreLoad | #LoadLoad sll %o0, 8, %o2 add %g6, TI_FPREGS+0x80, %o3 add %g6, TI_FPREGS+0xc0, %o4 + membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 membar #Sync wr %g0, FPRS_DU, %fprs ba,pt %xcc, rt_continue stb %l5, [%g6 + TI_FPDEPTH] - -cplus_rinsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1 - - .globl cheetah_plus_patch_rtrap -cheetah_plus_patch_rtrap: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_rinsn_1), %o0 - sethi %hi(cplus_rtrap_insn_1), %o2 - lduw [%o0 + %lo(cplus_rinsn_1)], %o1 - or %o2, %lo(cplus_rtrap_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 4c9c8f24174..c1f34237cdf 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -187,17 +187,13 @@ int prom_callback(long *args) } if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) { - unsigned long kernel_pctx = 0; - - if (tlb_type == cheetah_plus) - kernel_pctx |= (CTX_CHEETAH_PLUS_NUC | - CTX_CHEETAH_PLUS_CTX0); + extern unsigned long sparc64_kern_pri_context; /* Spitfire Errata #32 workaround */ __asm__ __volatile__("stxa %0, [%1] %2\n\t" "flush %%g6" : /* No outputs */ - : "r" (kernel_pctx), + : "r" (sparc64_kern_pri_context), "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 89f2fcfcd66..9478551cb02 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -336,20 +336,13 @@ do_unlock: call init_irqwork_curcpu nop - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f) - ba,pt %xcc, 2f - nop - -1: /* Start using proper page size encodings in ctx register. */ - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 + /* Start using proper page size encodings in ctx register. */ + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 - sllx %g3, 32, %g3 - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - or %g3, %g2, %g3 - stxa %g3, [%g1] ASI_DMMU + stxa %g2, [%g1] ASI_DMMU membar #Sync -2: rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 99c809a1e5a..39160926267 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -16,23 +16,14 @@ .text set_pcontext: -cplus_winfixup_insn_1: - sethi %hi(0), %l1 + sethi %hi(sparc64_kern_pri_context), %l1 + ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1 mov PRIMARY_CONTEXT, %g1 - sllx %l1, 32, %l1 -cplus_winfixup_insn_2: - sethi %hi(0), %g2 - or %l1, %g2, %l1 stxa %l1, [%g1] ASI_DMMU flush %g6 retl nop -cplus_wfinsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1 -cplus_wfinsn_2: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - .align 32 /* Here are the rules, pay attention. @@ -395,23 +386,3 @@ window_dax_from_user_common: add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - - - .globl cheetah_plus_patch_winfixup -cheetah_plus_patch_winfixup: - sethi %hi(cplus_wfinsn_1), %o0 - sethi %hi(cplus_winfixup_insn_1), %o2 - lduw [%o0 + %lo(cplus_wfinsn_1)], %o1 - or %o2, %lo(cplus_winfixup_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - - sethi %hi(cplus_wfinsn_2), %o0 - sethi %hi(cplus_winfixup_insn_2), %o2 - lduw [%o0 + %lo(cplus_wfinsn_2)], %o1 - or %o2, %lo(cplus_winfixup_insn_2), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S index 4e18989bd60..a0ded5c5aa5 100644 --- a/arch/sparc64/lib/VISsave.S +++ b/arch/sparc64/lib/VISsave.S @@ -59,15 +59,17 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 be,pn %icc, 9b add %g6, TI_FPREGS, %g2 andcc %o5, FPRS_DL, %g0 - membar #StoreStore | #LoadStore be,pn %icc, 4f add %g6, TI_FPREGS+0x40, %g3 + membar #Sync stda %f0, [%g2 + %g1] ASI_BLK_P stda %f16, [%g3 + %g1] ASI_BLK_P + membar #Sync andcc %o5, FPRS_DU, %g0 be,pn %icc, 5f 4: add %g1, 128, %g1 + membar #Sync stda %f32, [%g2 + %g1] ASI_BLK_P stda %f48, [%g3 + %g1] ASI_BLK_P @@ -87,7 +89,7 @@ vis1: ldub [%g6 + TI_FPSAVED], %g3 sll %g1, 5, %g1 add %g6, TI_FPREGS+0xc0, %g3 wr %g0, FPRS_FEF, %fprs - membar #StoreStore | #LoadStore + membar #Sync stda %f32, [%g2 + %g1] ASI_BLK_P stda %f48, [%g3 + %g1] ASI_BLK_P membar #Sync @@ -128,8 +130,8 @@ VISenterhalf: be,pn %icc, 4f add %g6, TI_FPREGS, %g2 - membar #StoreStore | #LoadStore add %g6, TI_FPREGS+0x40, %g3 + membar #Sync stda %f0, [%g2 + %g1] ASI_BLK_P stda %f16, [%g3 + %g1] ASI_BLK_P membar #Sync diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 5db50524f20..1e44ee26cee 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -105,7 +105,7 @@ static void __init read_obp_memory(const char *property, regs[i].phys_addr = base; regs[i].reg_size = size; } - sort(regs, ents, sizeof(struct linux_prom64_registers), + sort(regs, ents, sizeof(struct linux_prom64_registers), cmp_p64, NULL); } @@ -133,6 +133,12 @@ extern unsigned int sparc_ramdisk_size; struct page *mem_map_zero __read_mostly; +unsigned int sparc64_highest_unlocked_tlb_ent __read_mostly; + +unsigned long sparc64_kern_pri_context __read_mostly; +unsigned long sparc64_kern_pri_nuc_bits __read_mostly; +unsigned long sparc64_kern_sec_context __read_mostly; + int bigkernel = 0; /* XXX Tune this... */ @@ -361,7 +367,11 @@ struct linux_prom_translation { unsigned long size; unsigned long data; }; -static struct linux_prom_translation prom_trans[512] __initdata; + +/* Exported for kernel TLB miss handling in ktlb.S */ +struct linux_prom_translation prom_trans[512] __read_mostly; +unsigned int prom_trans_ents __read_mostly; +unsigned int swapper_pgd_zero __read_mostly; extern unsigned long prom_boot_page; extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle); @@ -371,178 +381,57 @@ extern void register_prom_callbacks(void); /* Exported for SMP bootup purposes. */ unsigned long kern_locked_tte_data; -/* Exported for kernel TLB miss handling in ktlb.S */ -unsigned long prom_pmd_phys __read_mostly; -unsigned int swapper_pgd_zero __read_mostly; - -/* Allocate power-of-2 aligned chunks from the end of the - * kernel image. Return physical address. - */ -static inline unsigned long early_alloc_phys(unsigned long size) -{ - unsigned long base; - - BUILD_BUG_ON(size & (size - 1)); - - kern_size = (kern_size + (size - 1)) & ~(size - 1); - base = kern_base + kern_size; - kern_size += size; - - return base; -} - -static inline unsigned long load_phys32(unsigned long pa) -{ - unsigned long val; - - __asm__ __volatile__("lduwa [%1] %2, %0" - : "=&r" (val) - : "r" (pa), "i" (ASI_PHYS_USE_EC)); - - return val; -} - -static inline unsigned long load_phys64(unsigned long pa) -{ - unsigned long val; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=&r" (val) - : "r" (pa), "i" (ASI_PHYS_USE_EC)); - - return val; -} - -static inline void store_phys32(unsigned long pa, unsigned long val) -{ - __asm__ __volatile__("stwa %0, [%1] %2" - : /* no outputs */ - : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC)); -} - -static inline void store_phys64(unsigned long pa, unsigned long val) -{ - __asm__ __volatile__("stxa %0, [%1] %2" - : /* no outputs */ - : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC)); -} - -#define BASE_PAGE_SIZE 8192 - /* * Translate PROM's mapping we capture at boot time into physical address. * The second parameter is only set from prom_callback() invocations. */ unsigned long prom_virt_to_phys(unsigned long promva, int *error) { - unsigned long pmd_phys = (prom_pmd_phys + - ((promva >> 23) & 0x7ff) * sizeof(pmd_t)); - unsigned long pte_phys; - pmd_t pmd_ent; - pte_t pte_ent; - unsigned long base; - - pmd_val(pmd_ent) = load_phys32(pmd_phys); - if (pmd_none(pmd_ent)) { - if (error) - *error = 1; - return 0; - } + int i; - pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL; - pte_phys += ((promva >> 13) & 0x3ff) * sizeof(pte_t); - pte_val(pte_ent) = load_phys64(pte_phys); - if (!pte_present(pte_ent)) { - if (error) - *error = 1; - return 0; - } - if (error) { - *error = 0; - return pte_val(pte_ent); + for (i = 0; i < prom_trans_ents; i++) { + struct linux_prom_translation *p = &prom_trans[i]; + + if (promva >= p->virt && + promva < (p->virt + p->size)) { + unsigned long base = p->data & _PAGE_PADDR; + + if (error) + *error = 0; + return base + (promva & (8192 - 1)); + } } - base = pte_val(pte_ent) & _PAGE_PADDR; - return (base + (promva & (BASE_PAGE_SIZE - 1))); + if (error) + *error = 1; + return 0UL; } /* The obp translations are saved based on 8k pagesize, since obp can * use a mixture of pagesizes. Misses to the LOW_OBP_ADDRESS -> - * HI_OBP_ADDRESS range are handled in entry.S and do not use the vpte + * HI_OBP_ADDRESS range are handled in ktlb.S and do not use the vpte * scheme (also, see rant in inherit_locked_prom_mappings()). */ -static void __init build_obp_range(unsigned long start, unsigned long end, unsigned long data) -{ - unsigned long vaddr; - - for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) { - unsigned long val, pte_phys, pmd_phys; - pmd_t pmd_ent; - int i; - - pmd_phys = (prom_pmd_phys + - (((vaddr >> 23) & 0x7ff) * sizeof(pmd_t))); - pmd_val(pmd_ent) = load_phys32(pmd_phys); - if (pmd_none(pmd_ent)) { - pte_phys = early_alloc_phys(BASE_PAGE_SIZE); - - for (i = 0; i < BASE_PAGE_SIZE / sizeof(pte_t); i++) - store_phys64(pte_phys+i*sizeof(pte_t),0); - - pmd_val(pmd_ent) = pte_phys >> 11UL; - store_phys32(pmd_phys, pmd_val(pmd_ent)); - } - - pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL; - pte_phys += (((vaddr >> 13) & 0x3ff) * sizeof(pte_t)); - - val = data; - - /* Clear diag TTE bits. */ - if (tlb_type == spitfire) - val &= ~0x0003fe0000000000UL; - - store_phys64(pte_phys, val | _PAGE_MODIFIED); - - data += BASE_PAGE_SIZE; - } -} - static inline int in_obp_range(unsigned long vaddr) { return (vaddr >= LOW_OBP_ADDRESS && vaddr < HI_OBP_ADDRESS); } -#define OBP_PMD_SIZE 2048 -static void __init build_obp_pgtable(int prom_trans_ents) +static int cmp_ptrans(const void *a, const void *b) { - unsigned long i; - - prom_pmd_phys = early_alloc_phys(OBP_PMD_SIZE); - for (i = 0; i < OBP_PMD_SIZE; i += 4) - store_phys32(prom_pmd_phys + i, 0); + const struct linux_prom_translation *x = a, *y = b; - for (i = 0; i < prom_trans_ents; i++) { - unsigned long start, end; - - if (!in_obp_range(prom_trans[i].virt)) - continue; - - start = prom_trans[i].virt; - end = start + prom_trans[i].size; - if (end > HI_OBP_ADDRESS) - end = HI_OBP_ADDRESS; - - build_obp_range(start, end, prom_trans[i].data); - } + if (x->virt > y->virt) + return 1; + if (x->virt < y->virt) + return -1; + return 0; } -/* Read OBP translations property into 'prom_trans[]'. - * Return the number of entries. - */ -static int __init read_obp_translations(void) +/* Read OBP translations property into 'prom_trans[]'. */ +static void __init read_obp_translations(void) { - int n, node; + int n, node, ents, first, last, i; node = prom_finddevice("/virtual-memory"); n = prom_getproplen(node, "translations"); @@ -561,8 +450,44 @@ static int __init read_obp_translations(void) prom_printf("prom_mappings: Couldn't get property.\n"); prom_halt(); } + n = n / sizeof(struct linux_prom_translation); - return n; + + ents = n; + + sort(prom_trans, ents, sizeof(struct linux_prom_translation), + cmp_ptrans, NULL); + + /* Now kick out all the non-OBP entries. */ + for (i = 0; i < ents; i++) { + if (in_obp_range(prom_trans[i].virt)) + break; + } + first = i; + for (; i < ents; i++) { + if (!in_obp_range(prom_trans[i].virt)) + break; + } + last = i; + + for (i = 0; i < (last - first); i++) { + struct linux_prom_translation *src = &prom_trans[i + first]; + struct linux_prom_translation *dest = &prom_trans[i]; + + *dest = *src; + } + for (; i < ents; i++) { + struct linux_prom_translation *dest = &prom_trans[i]; + dest->virt = dest->size = dest->data = 0x0UL; + } + + prom_trans_ents = last - first; + + if (tlb_type == spitfire) { + /* Clear diag TTE bits. */ + for (i = 0; i < prom_trans_ents; i++) + prom_trans[i].data &= ~0x0003fe0000000000UL; + } } static void __init remap_kernel(void) @@ -582,29 +507,36 @@ static void __init remap_kernel(void) prom_dtlb_load(tlb_ent, tte_data, tte_vaddr); prom_itlb_load(tlb_ent, tte_data, tte_vaddr); if (bigkernel) { - prom_dtlb_load(tlb_ent - 1, + tlb_ent -= 1; + prom_dtlb_load(tlb_ent, tte_data + 0x400000, tte_vaddr + 0x400000); - prom_itlb_load(tlb_ent - 1, + prom_itlb_load(tlb_ent, tte_data + 0x400000, tte_vaddr + 0x400000); } + sparc64_highest_unlocked_tlb_ent = tlb_ent - 1; + if (tlb_type == cheetah_plus) { + sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 | + CTX_CHEETAH_PLUS_NUC); + sparc64_kern_pri_nuc_bits = CTX_CHEETAH_PLUS_NUC; + sparc64_kern_sec_context = CTX_CHEETAH_PLUS_CTX0; + } } + static void __init inherit_prom_mappings(void) { - int n; - - n = read_obp_translations(); - build_obp_pgtable(n); + read_obp_translations(); /* Now fixup OBP's idea about where we really are mapped. */ prom_printf("Remapping the kernel... "); remap_kernel(); - prom_printf("done.\n"); + prom_printf("Registering callbacks... "); register_prom_callbacks(); + prom_printf("done.\n"); } /* The OBP specifications for sun4u mark 0xfffffffc00000000 and @@ -788,8 +720,8 @@ void inherit_locked_prom_mappings(int save_p) } } if (tlb_type == spitfire) { - int high = SPITFIRE_HIGHEST_LOCKED_TLBENT - bigkernel; - for (i = 0; i < high; i++) { + int high = sparc64_highest_unlocked_tlb_ent; + for (i = 0; i <= high; i++) { unsigned long data; /* Spitfire Errata #32 workaround */ @@ -877,9 +809,9 @@ void inherit_locked_prom_mappings(int save_p) } } } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - int high = CHEETAH_HIGHEST_LOCKED_TLBENT - bigkernel; + int high = sparc64_highest_unlocked_tlb_ent; - for (i = 0; i < high; i++) { + for (i = 0; i <= high; i++) { unsigned long data; data = cheetah_get_ldtlb_data(i); @@ -1556,7 +1488,6 @@ void __init paging_init(void) swapper_pgd_zero = pgd_val(swapper_pg_dir[0]); - /* Inherit non-locked OBP mappings. */ inherit_prom_mappings(); /* Ok, we can use our TLB miss and window trap handlers safely. diff --git a/arch/um/Makefile b/arch/um/Makefile index 7af37e342e3..e1ffad22460 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -152,7 +152,7 @@ archclean: $(SYMLINK_HEADERS): @echo ' SYMLINK $@' ifneq ($(KBUILD_SRC),) - ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@ + $(Q)ln -fsn $(srctree)/include/asm-um/$(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $@ else $(Q)cd $(TOPDIR)/$(dir $@) ; \ ln -sf $(basename $(notdir $@))-$(SUBARCH)$(suffix $@) $(notdir $@) diff --git a/arch/um/drivers/Makefile b/arch/um/drivers/Makefile index 783e18cae09..de17d4c6e02 100644 --- a/arch/um/drivers/Makefile +++ b/arch/um/drivers/Makefile @@ -13,7 +13,7 @@ mcast-objs := mcast_kern.o mcast_user.o net-objs := net_kern.o net_user.o mconsole-objs := mconsole_kern.o mconsole_user.o hostaudio-objs := hostaudio_kern.o -ubd-objs := ubd_kern.o +ubd-objs := ubd_kern.o ubd_user.o port-objs := port_kern.o port_user.o harddog-objs := harddog_kern.o harddog_user.o diff --git a/arch/um/drivers/cow.h b/arch/um/drivers/cow.h index 4fcf3a8d13f..dc36b222100 100644 --- a/arch/um/drivers/cow.h +++ b/arch/um/drivers/cow.h @@ -3,15 +3,40 @@ #include <asm/types.h> -#if defined(__BIG_ENDIAN) -# define ntohll(x) (x) -# define htonll(x) (x) -#elif defined(__LITTLE_ENDIAN) -# define ntohll(x) bswap_64(x) -# define htonll(x) bswap_64(x) +#if defined(__KERNEL__) + +# include <asm/byteorder.h> + +# if defined(__BIG_ENDIAN) +# define ntohll(x) (x) +# define htonll(x) (x) +# elif defined(__LITTLE_ENDIAN) +# define ntohll(x) be64_to_cpu(x) +# define htonll(x) cpu_to_be64(x) +# else +# error "Could not determine byte order" +# endif + #else -#error "__BYTE_ORDER not defined" +/* For the definition of ntohl, htonl and __BYTE_ORDER */ +#include <endian.h> +#include <netinet/in.h> +#if defined(__BYTE_ORDER) + +# if __BYTE_ORDER == __BIG_ENDIAN +# define ntohll(x) (x) +# define htonll(x) (x) +# elif __BYTE_ORDER == __LITTLE_ENDIAN +# define ntohll(x) bswap_64(x) +# define htonll(x) bswap_64(x) +# else +# error "Could not determine byte order: __BYTE_ORDER uncorrectly defined" +# endif + +#else /* ! defined(__BYTE_ORDER) */ +# error "Could not determine byte order: __BYTE_ORDER not defined" #endif +#endif /* ! defined(__KERNEL__) */ extern int init_cow_file(int fd, char *cow_file, char *backing_file, int sectorsize, int alignment, int *bitmap_offset_out, diff --git a/arch/um/drivers/cow_user.c b/arch/um/drivers/cow_user.c index a8ce6fc3ef2..fbe2217db5d 100644 --- a/arch/um/drivers/cow_user.c +++ b/arch/um/drivers/cow_user.c @@ -9,7 +9,6 @@ #include <sys/time.h> #include <sys/param.h> #include <sys/user.h> -#include <netinet/in.h> #include "os.h" diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index e77a38da435..f73134333f6 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -35,7 +35,6 @@ #include "linux/blkpg.h" #include "linux/genhd.h" #include "linux/spinlock.h" -#include "asm/atomic.h" #include "asm/segment.h" #include "asm/uaccess.h" #include "asm/irq.h" @@ -54,21 +53,20 @@ #include "mem.h" #include "mem_kern.h" #include "cow.h" -#include "aio.h" enum ubd_req { UBD_READ, UBD_WRITE }; struct io_thread_req { - enum aio_type op; + enum ubd_req op; int fds[2]; unsigned long offsets[2]; unsigned long long offset; unsigned long length; char *buffer; int sectorsize; - int bitmap_offset; - long bitmap_start; - long bitmap_end; + unsigned long sector_mask; + unsigned long long cow_offset; + unsigned long bitmap_words[2]; int error; }; @@ -82,31 +80,28 @@ extern int create_cow_file(char *cow_file, char *backing_file, unsigned long *bitmap_len_out, int *data_offset_out); extern int read_cow_bitmap(int fd, void *buf, int offset, int len); -extern void do_io(struct io_thread_req *req, struct request *r, - unsigned long *bitmap); +extern void do_io(struct io_thread_req *req); -static inline int ubd_test_bit(__u64 bit, void *data) +static inline int ubd_test_bit(__u64 bit, unsigned char *data) { - unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(buffer[0]) * 8; + bits = sizeof(data[0]) * 8; n = bit / bits; off = bit % bits; - return((buffer[n] & (1 << off)) != 0); + return((data[n] & (1 << off)) != 0); } -static inline void ubd_set_bit(__u64 bit, void *data) +static inline void ubd_set_bit(__u64 bit, unsigned char *data) { - unsigned char *buffer = data; __u64 n; int bits, off; - bits = sizeof(buffer[0]) * 8; + bits = sizeof(data[0]) * 8; n = bit / bits; off = bit % bits; - buffer[n] |= (1 << off); + data[n] |= (1 << off); } /*End stuff from ubd_user.h*/ @@ -115,6 +110,8 @@ static inline void ubd_set_bit(__u64 bit, void *data) static DEFINE_SPINLOCK(ubd_io_lock); static DEFINE_SPINLOCK(ubd_lock); +static void (*do_ubd)(void); + static int ubd_open(struct inode * inode, struct file * filp); static int ubd_release(struct inode * inode, struct file * file); static int ubd_ioctl(struct inode * inode, struct file * file, @@ -161,8 +158,6 @@ struct cow { int data_offset; }; -#define MAX_SG 64 - struct ubd { char *file; int count; @@ -173,7 +168,6 @@ struct ubd { int no_cow; struct cow cow; struct platform_device pdev; - struct scatterlist sg[MAX_SG]; }; #define DEFAULT_COW { \ @@ -466,114 +460,81 @@ __uml_help(fakehd, ); static void do_ubd_request(request_queue_t * q); -static int in_ubd; + +/* Only changed by ubd_init, which is an initcall. */ +int thread_fd = -1; /* Changed by ubd_handler, which is serialized because interrupts only * happen on CPU 0. */ int intr_count = 0; -static void ubd_end_request(struct request *req, int bytes, int uptodate) +/* call ubd_finish if you need to serialize */ +static void __ubd_finish(struct request *req, int error) { - if (!end_that_request_first(req, uptodate, bytes >> 9)) { - add_disk_randomness(req->rq_disk); - end_that_request_last(req); + int nsect; + + if(error){ + end_request(req, 0); + return; } + nsect = req->current_nr_sectors; + req->sector += nsect; + req->buffer += nsect << 9; + req->errors = 0; + req->nr_sectors -= nsect; + req->current_nr_sectors = 0; + end_request(req, 1); } -/* call ubd_finish if you need to serialize */ -static void __ubd_finish(struct request *req, int bytes) +static inline void ubd_finish(struct request *req, int error) { - if(bytes < 0){ - ubd_end_request(req, 0, 0); - return; - } - - ubd_end_request(req, bytes, 1); + spin_lock(&ubd_io_lock); + __ubd_finish(req, error); + spin_unlock(&ubd_io_lock); } -static inline void ubd_finish(struct request *req, int bytes) +/* Called without ubd_io_lock held */ +static void ubd_handler(void) { - spin_lock(&ubd_io_lock); - __ubd_finish(req, bytes); - spin_unlock(&ubd_io_lock); + struct io_thread_req req; + struct request *rq = elv_next_request(ubd_queue); + int n; + + do_ubd = NULL; + intr_count++; + n = os_read_file(thread_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + printk(KERN_ERR "Pid %d - spurious interrupt in ubd_handler, " + "err = %d\n", os_getpid(), -n); + spin_lock(&ubd_io_lock); + end_request(rq, 0); + spin_unlock(&ubd_io_lock); + return; + } + + ubd_finish(rq, req.error); + reactivate_fd(thread_fd, UBD_IRQ); + do_ubd_request(ubd_queue); } -struct bitmap_io { - atomic_t count; - struct aio_context aio; -}; - -struct ubd_aio { - struct aio_context aio; - struct request *req; - int len; - struct bitmap_io *bitmap; - void *bitmap_buf; -}; - -static int ubd_reply_fd = -1; - static irqreturn_t ubd_intr(int irq, void *dev, struct pt_regs *unused) { - struct aio_thread_reply reply; - struct ubd_aio *aio; - struct request *req; - int err, n, fd = (int) (long) dev; - - while(1){ - err = os_read_file(fd, &reply, sizeof(reply)); - if(err == -EAGAIN) - break; - if(err < 0){ - printk("ubd_aio_handler - read returned err %d\n", - -err); - break; - } - - aio = container_of(reply.data, struct ubd_aio, aio); - n = reply.err; - - if(n == 0){ - req = aio->req; - req->nr_sectors -= aio->len >> 9; - - if((aio->bitmap != NULL) && - (atomic_dec_and_test(&aio->bitmap->count))){ - aio->aio = aio->bitmap->aio; - aio->len = 0; - kfree(aio->bitmap); - aio->bitmap = NULL; - submit_aio(&aio->aio); - } - else { - if((req->nr_sectors == 0) && - (aio->bitmap == NULL)){ - int len = req->hard_nr_sectors << 9; - ubd_finish(req, len); - } - - if(aio->bitmap_buf != NULL) - kfree(aio->bitmap_buf); - kfree(aio); - } - } - else if(n < 0){ - ubd_finish(aio->req, n); - if(aio->bitmap != NULL) - kfree(aio->bitmap); - if(aio->bitmap_buf != NULL) - kfree(aio->bitmap_buf); - kfree(aio); - } - } - reactivate_fd(fd, UBD_IRQ); + ubd_handler(); + return(IRQ_HANDLED); +} - do_ubd_request(ubd_queue); +/* Only changed by ubd_init, which is an initcall. */ +static int io_pid = -1; - return(IRQ_HANDLED); +void kill_io_thread(void) +{ + if(io_pid != -1) + os_kill_process(io_pid, 1); } +__uml_exitcall(kill_io_thread); + static int ubd_file_size(struct ubd *dev, __u64 *size_out) { char *file; @@ -608,7 +569,7 @@ static int ubd_open_dev(struct ubd *dev) &dev->cow.data_offset, create_ptr); if((dev->fd == -ENOENT) && create_cow){ - dev->fd = create_cow_file(dev->file, dev->cow.file, + dev->fd = create_cow_file(dev->file, dev->cow.file, dev->openflags, 1 << 9, PAGE_SIZE, &dev->cow.bitmap_offset, &dev->cow.bitmap_len, @@ -870,10 +831,6 @@ int ubd_init(void) { int i; - ubd_reply_fd = init_aio_irq(UBD_IRQ, "ubd", ubd_intr); - if(ubd_reply_fd < 0) - printk("Setting up ubd AIO failed, err = %d\n", ubd_reply_fd); - devfs_mk_dir("ubd"); if (register_blkdev(MAJOR_NR, "ubd")) return -1; @@ -884,7 +841,6 @@ int ubd_init(void) return -1; } - blk_queue_max_hw_segments(ubd_queue, MAX_SG); if (fake_major != MAJOR_NR) { char name[sizeof("ubd_nnn\0")]; @@ -896,12 +852,40 @@ int ubd_init(void) driver_register(&ubd_driver); for (i = 0; i < MAX_DEV; i++) ubd_add(i); - return 0; } late_initcall(ubd_init); +int ubd_driver_init(void){ + unsigned long stack; + int err; + + /* Set by CONFIG_BLK_DEV_UBD_SYNC or ubd=sync.*/ + if(global_openflags.s){ + printk(KERN_INFO "ubd: Synchronous mode\n"); + /* Letting ubd=sync be like using ubd#s= instead of ubd#= is + * enough. So use anyway the io thread. */ + } + stack = alloc_stack(0, 0); + io_pid = start_io_thread(stack + PAGE_SIZE - sizeof(void *), + &thread_fd); + if(io_pid < 0){ + printk(KERN_ERR + "ubd : Failed to start I/O thread (errno = %d) - " + "falling back to synchronous I/O\n", -io_pid); + io_pid = -1; + return(0); + } + err = um_request_irq(UBD_IRQ, thread_fd, IRQ_READ, ubd_intr, + SA_INTERRUPT, "ubd", ubd_dev); + if(err != 0) + printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err); + return(err); +} + +device_initcall(ubd_driver_init); + static int ubd_open(struct inode *inode, struct file *filp) { struct gendisk *disk = inode->i_bdev->bd_disk; @@ -939,55 +923,105 @@ static int ubd_release(struct inode * inode, struct file * file) return(0); } -static void cowify_bitmap(struct io_thread_req *req, unsigned long *bitmap) +static void cowify_bitmap(__u64 io_offset, int length, unsigned long *cow_mask, + __u64 *cow_offset, unsigned long *bitmap, + __u64 bitmap_offset, unsigned long *bitmap_words, + __u64 bitmap_len) { - __u64 sector = req->offset / req->sectorsize; - int i; + __u64 sector = io_offset >> 9; + int i, update_bitmap = 0; + + for(i = 0; i < length >> 9; i++){ + if(cow_mask != NULL) + ubd_set_bit(i, (unsigned char *) cow_mask); + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + continue; - for(i = 0; i < req->length / req->sectorsize; i++){ - if(ubd_test_bit(sector + i, bitmap)) - continue; + update_bitmap = 1; + ubd_set_bit(sector + i, (unsigned char *) bitmap); + } + + if(!update_bitmap) + return; - if(req->bitmap_start == -1) - req->bitmap_start = sector + i; - req->bitmap_end = sector + i + 1; + *cow_offset = sector / (sizeof(unsigned long) * 8); - ubd_set_bit(sector + i, bitmap); - } + /* This takes care of the case where we're exactly at the end of the + * device, and *cow_offset + 1 is off the end. So, just back it up + * by one word. Thanks to Lynn Kerby for the fix and James McMechan + * for the original diagnosis. + */ + if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) / + sizeof(unsigned long) - 1)) + (*cow_offset)--; + + bitmap_words[0] = bitmap[*cow_offset]; + bitmap_words[1] = bitmap[*cow_offset + 1]; + + *cow_offset *= sizeof(unsigned long); + *cow_offset += bitmap_offset; +} + +static void cowify_req(struct io_thread_req *req, unsigned long *bitmap, + __u64 bitmap_offset, __u64 bitmap_len) +{ + __u64 sector = req->offset >> 9; + int i; + + if(req->length > (sizeof(req->sector_mask) * 8) << 9) + panic("Operation too long"); + + if(req->op == UBD_READ) { + for(i = 0; i < req->length >> 9; i++){ + if(ubd_test_bit(sector + i, (unsigned char *) bitmap)) + ubd_set_bit(i, (unsigned char *) + &req->sector_mask); + } + } + else cowify_bitmap(req->offset, req->length, &req->sector_mask, + &req->cow_offset, bitmap, bitmap_offset, + req->bitmap_words, bitmap_len); } /* Called with ubd_io_lock held */ -static int prepare_request(struct request *req, struct io_thread_req *io_req, - unsigned long long offset, int page_offset, - int len, struct page *page) +static int prepare_request(struct request *req, struct io_thread_req *io_req) { struct gendisk *disk = req->rq_disk; struct ubd *dev = disk->private_data; + __u64 offset; + int len; + + if(req->rq_status == RQ_INACTIVE) return(1); /* This should be impossible now */ if((rq_data_dir(req) == WRITE) && !dev->openflags.w){ printk("Write attempted on readonly ubd device %s\n", disk->disk_name); - ubd_end_request(req, 0, 0); + end_request(req, 0); return(1); } + offset = ((__u64) req->sector) << 9; + len = req->current_nr_sectors << 9; + io_req->fds[0] = (dev->cow.file != NULL) ? dev->cow.fd : dev->fd; io_req->fds[1] = dev->fd; + io_req->cow_offset = -1; io_req->offset = offset; io_req->length = len; io_req->error = 0; - io_req->op = (rq_data_dir(req) == READ) ? AIO_READ : AIO_WRITE; + io_req->sector_mask = 0; + + io_req->op = (rq_data_dir(req) == READ) ? UBD_READ : UBD_WRITE; io_req->offsets[0] = 0; io_req->offsets[1] = dev->cow.data_offset; - io_req->buffer = page_address(page) + page_offset; + io_req->buffer = req->buffer; io_req->sectorsize = 1 << 9; - io_req->bitmap_offset = dev->cow.bitmap_offset; - io_req->bitmap_start = -1; - io_req->bitmap_end = -1; - if((dev->cow.file != NULL) && (io_req->op == UBD_WRITE)) - cowify_bitmap(io_req, dev->cow.bitmap); + if(dev->cow.file != NULL) + cowify_req(io_req, dev->cow.bitmap, dev->cow.bitmap_offset, + dev->cow.bitmap_len); + return(0); } @@ -996,36 +1030,30 @@ static void do_ubd_request(request_queue_t *q) { struct io_thread_req io_req; struct request *req; - __u64 sector; - int err; - - if(in_ubd) - return; - in_ubd = 1; - while((req = elv_next_request(q)) != NULL){ - struct gendisk *disk = req->rq_disk; - struct ubd *dev = disk->private_data; - int n, i; - - blkdev_dequeue_request(req); - - sector = req->sector; - n = blk_rq_map_sg(q, req, dev->sg); - - for(i = 0; i < n; i++){ - struct scatterlist *sg = &dev->sg[i]; - - err = prepare_request(req, &io_req, sector << 9, - sg->offset, sg->length, - sg->page); - if(err) - continue; - - sector += sg->length >> 9; - do_io(&io_req, req, dev->cow.bitmap); + int err, n; + + if(thread_fd == -1){ + while((req = elv_next_request(q)) != NULL){ + err = prepare_request(req, &io_req); + if(!err){ + do_io(&io_req); + __ubd_finish(req, io_req.error); + } + } + } + else { + if(do_ubd || (req = elv_next_request(q)) == NULL) + return; + err = prepare_request(req, &io_req); + if(!err){ + do_ubd = ubd_handler; + n = os_write_file(thread_fd, (char *) &io_req, + sizeof(io_req)); + if(n != sizeof(io_req)) + printk("write to io thread failed, " + "errno = %d\n", -n); } } - in_ubd = 0; } static int ubd_ioctl(struct inode * inode, struct file * file, @@ -1241,95 +1269,131 @@ int create_cow_file(char *cow_file, char *backing_file, struct openflags flags, return(err); } -void do_io(struct io_thread_req *req, struct request *r, unsigned long *bitmap) +static int update_bitmap(struct io_thread_req *req) { - struct ubd_aio *aio; - struct bitmap_io *bitmap_io = NULL; - char *buf; - void *bitmap_buf = NULL; - unsigned long len, sector; - int nsectors, start, end, bit, err; - __u64 off; - - if(req->bitmap_start != -1){ - /* Round up to the nearest word */ - int round = sizeof(unsigned long); - len = (req->bitmap_end - req->bitmap_start + - round * 8 - 1) / (round * 8); - len *= round; - - off = req->bitmap_start / (8 * round); - off *= round; - - bitmap_io = kmalloc(sizeof(*bitmap_io), GFP_KERNEL); - if(bitmap_io == NULL){ - printk("Failed to kmalloc bitmap IO\n"); - req->error = 1; - return; - } + int n; - bitmap_buf = kmalloc(len, GFP_KERNEL); - if(bitmap_buf == NULL){ - printk("do_io : kmalloc of bitmap chunk " - "failed\n"); - kfree(bitmap_io); - req->error = 1; - return; - } - memcpy(bitmap_buf, &bitmap[off / sizeof(bitmap[0])], len); - - *bitmap_io = ((struct bitmap_io) - { .count = ATOMIC_INIT(0), - .aio = INIT_AIO(AIO_WRITE, req->fds[1], - bitmap_buf, len, - req->bitmap_offset + off, - ubd_reply_fd) } ); - } + if(req->cow_offset == -1) + return(0); - nsectors = req->length / req->sectorsize; - start = 0; - end = nsectors; - bit = 0; - do { - if(bitmap != NULL){ - sector = req->offset / req->sectorsize; - bit = ubd_test_bit(sector + start, bitmap); - end = start; - while((end < nsectors) && - (ubd_test_bit(sector + end, bitmap) == bit)) - end++; - } + n = os_seek_file(req->fds[1], req->cow_offset); + if(n < 0){ + printk("do_io - bitmap lseek failed : err = %d\n", -n); + return(1); + } - off = req->offsets[bit] + req->offset + - start * req->sectorsize; - len = (end - start) * req->sectorsize; - buf = &req->buffer[start * req->sectorsize]; + n = os_write_file(req->fds[1], &req->bitmap_words, + sizeof(req->bitmap_words)); + if(n != sizeof(req->bitmap_words)){ + printk("do_io - bitmap update failed, err = %d fd = %d\n", -n, + req->fds[1]); + return(1); + } - aio = kmalloc(sizeof(*aio), GFP_KERNEL); - if(aio == NULL){ - req->error = 1; - return; - } + return(0); +} - *aio = ((struct ubd_aio) - { .aio = INIT_AIO(req->op, req->fds[bit], buf, - len, off, ubd_reply_fd), - .len = len, - .req = r, - .bitmap = bitmap_io, - .bitmap_buf = bitmap_buf }); - - if(aio->bitmap != NULL) - atomic_inc(&aio->bitmap->count); - - err = submit_aio(&aio->aio); - if(err){ - printk("do_io - submit_aio failed, " - "err = %d\n", err); - req->error = 1; - return; - } +void do_io(struct io_thread_req *req) +{ + char *buf; + unsigned long len; + int n, nsectors, start, end, bit; + int err; + __u64 off; + + nsectors = req->length / req->sectorsize; + start = 0; + do { + bit = ubd_test_bit(start, (unsigned char *) &req->sector_mask); + end = start; + while((end < nsectors) && + (ubd_test_bit(end, (unsigned char *) + &req->sector_mask) == bit)) + end++; + + off = req->offset + req->offsets[bit] + + start * req->sectorsize; + len = (end - start) * req->sectorsize; + buf = &req->buffer[start * req->sectorsize]; + + err = os_seek_file(req->fds[bit], off); + if(err < 0){ + printk("do_io - lseek failed : err = %d\n", -err); + req->error = 1; + return; + } + if(req->op == UBD_READ){ + n = 0; + do { + buf = &buf[n]; + len -= n; + n = os_read_file(req->fds[bit], buf, len); + if (n < 0) { + printk("do_io - read failed, err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } while((n < len) && (n != 0)); + if (n < len) memset(&buf[n], 0, len - n); + } else { + n = os_write_file(req->fds[bit], buf, len); + if(n != len){ + printk("do_io - write failed err = %d " + "fd = %d\n", -n, req->fds[bit]); + req->error = 1; + return; + } + } + + start = end; + } while(start < nsectors); - start = end; - } while(start < nsectors); + req->error = update_bitmap(req); } + +/* Changed in start_io_thread, which is serialized by being called only + * from ubd_init, which is an initcall. + */ +int kernel_fd = -1; + +/* Only changed by the io thread */ +int io_count = 0; + +int io_thread(void *arg) +{ + struct io_thread_req req; + int n; + + ignore_sigwinch_sig(); + while(1){ + n = os_read_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)){ + if(n < 0) + printk("io_thread - read failed, fd = %d, " + "err = %d\n", kernel_fd, -n); + else { + printk("io_thread - short read, fd = %d, " + "length = %d\n", kernel_fd, n); + } + continue; + } + io_count++; + do_io(&req); + n = os_write_file(kernel_fd, &req, sizeof(req)); + if(n != sizeof(req)) + printk("io_thread - write failed, fd = %d, err = %d\n", + kernel_fd, -n); + } +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/drivers/ubd_user.c b/arch/um/drivers/ubd_user.c new file mode 100644 index 00000000000..b94d2bc4fe0 --- /dev/null +++ b/arch/um/drivers/ubd_user.c @@ -0,0 +1,75 @@ +/* + * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com) + * Copyright (C) 2001 Ridgerun,Inc (glonnon@ridgerun.com) + * Licensed under the GPL + */ + +#include <stddef.h> +#include <unistd.h> +#include <errno.h> +#include <sched.h> +#include <signal.h> +#include <string.h> +#include <netinet/in.h> +#include <sys/time.h> +#include <sys/socket.h> +#include <sys/mman.h> +#include <sys/param.h> +#include "asm/types.h" +#include "user_util.h" +#include "kern_util.h" +#include "user.h" +#include "ubd_user.h" +#include "os.h" +#include "cow.h" + +#include <endian.h> +#include <byteswap.h> + +void ignore_sigwinch_sig(void) +{ + signal(SIGWINCH, SIG_IGN); +} + +int start_io_thread(unsigned long sp, int *fd_out) +{ + int pid, fds[2], err; + + err = os_pipe(fds, 1, 1); + if(err < 0){ + printk("start_io_thread - os_pipe failed, err = %d\n", -err); + goto out; + } + + kernel_fd = fds[0]; + *fd_out = fds[1]; + + pid = clone(io_thread, (void *) sp, CLONE_FILES | CLONE_VM | SIGCHLD, + NULL); + if(pid < 0){ + printk("start_io_thread - clone failed : errno = %d\n", errno); + err = -errno; + goto out_close; + } + + return(pid); + + out_close: + os_close_file(fds[0]); + os_close_file(fds[1]); + kernel_fd = -1; + *fd_out = -1; + out: + return(err); +} + +/* + * Overrides for Emacs so that we follow Linus's tabbing style. + * Emacs will notice this stuff at the end of the file and automatically + * adjust the settings for this buffer only. This must remain at the end + * of the file. + * --------------------------------------------------------------------------- + * Local variables: + * c-file-style: "linux" + * End: + */ diff --git a/arch/um/include/aio.h b/arch/um/include/aio.h index 83f16877ab0..423bae9153f 100644 --- a/arch/um/include/aio.h +++ b/arch/um/include/aio.h @@ -14,27 +14,15 @@ struct aio_thread_reply { }; struct aio_context { - enum aio_type type; - int fd; - void *data; - int len; - unsigned long long offset; int reply_fd; struct aio_context *next; }; -#define INIT_AIO(aio_type, aio_fd, aio_data, aio_len, aio_offset, \ - aio_reply_fd) \ - { .type = aio_type, \ - .fd = aio_fd, \ - .data = aio_data, \ - .len = aio_len, \ - .offset = aio_offset, \ - .reply_fd = aio_reply_fd } - #define INIT_AIO_CONTEXT { .reply_fd = -1, \ .next = NULL } -extern int submit_aio(struct aio_context *aio); +extern int submit_aio(enum aio_type type, int fd, char *buf, int len, + unsigned long long offset, int reply_fd, + struct aio_context *aio); #endif diff --git a/arch/um/include/os.h b/arch/um/include/os.h index 6f766e1faec..2e58e304b8b 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -6,6 +6,7 @@ #ifndef __OS_H__ #define __OS_H__ +#include "uml-config.h" #include "asm/types.h" #include "../os/include/file.h" @@ -159,7 +160,11 @@ extern int can_do_skas(void); /* Make sure they are clear when running in TT mode. Required by * SEGV_MAYBE_FIXABLE */ +#ifdef UML_CONFIG_MODE_SKAS #define clear_can_do_skas() do { ptrace_faultinfo = proc_mm = 0; } while (0) +#else +#define clear_can_do_skas() do {} while (0) +#endif /* mem.c */ extern int create_mem_file(unsigned long len); diff --git a/arch/um/os-Linux/aio.c b/arch/um/os-Linux/aio.c index f6e64026f99..41cfb094420 100644 --- a/arch/um/os-Linux/aio.c +++ b/arch/um/os-Linux/aio.c @@ -6,7 +6,6 @@ #include <stdlib.h> #include <unistd.h> #include <signal.h> -#include <string.h> #include <errno.h> #include <sched.h> #include <sys/syscall.h> @@ -17,31 +16,18 @@ #include "user.h" #include "mode.h" +struct aio_thread_req { + enum aio_type type; + int io_fd; + unsigned long long offset; + char *buf; + int len; + struct aio_context *aio; +}; + static int aio_req_fd_r = -1; static int aio_req_fd_w = -1; -static int update_aio(struct aio_context *aio, int res) -{ - if(res < 0) - aio->len = res; - else if((res == 0) && (aio->type == AIO_READ)){ - /* This is the EOF case - we have hit the end of the file - * and it ends in a partial block, so we fill the end of - * the block with zeros and claim success. - */ - memset(aio->data, 0, aio->len); - aio->len = 0; - } - else if(res > 0){ - aio->len -= res; - aio->data += res; - aio->offset += res; - return aio->len; - } - - return 0; -} - #if defined(HAVE_AIO_ABI) #include <linux/aio_abi.h> @@ -80,7 +66,8 @@ static long io_getevents(aio_context_t ctx_id, long min_nr, long nr, * that it now backs the mmapped area. */ -static int do_aio(aio_context_t ctx, struct aio_context *aio) +static int do_aio(aio_context_t ctx, enum aio_type type, int fd, char *buf, + int len, unsigned long long offset, struct aio_context *aio) { struct iocb iocb, *iocbp = &iocb; char c; @@ -88,39 +75,40 @@ static int do_aio(aio_context_t ctx, struct aio_context *aio) iocb = ((struct iocb) { .aio_data = (unsigned long) aio, .aio_reqprio = 0, - .aio_fildes = aio->fd, - .aio_buf = (unsigned long) aio->data, - .aio_nbytes = aio->len, - .aio_offset = aio->offset, + .aio_fildes = fd, + .aio_buf = (unsigned long) buf, + .aio_nbytes = len, + .aio_offset = offset, .aio_reserved1 = 0, .aio_reserved2 = 0, .aio_reserved3 = 0 }); - switch(aio->type){ + switch(type){ case AIO_READ: iocb.aio_lio_opcode = IOCB_CMD_PREAD; + err = io_submit(ctx, 1, &iocbp); break; case AIO_WRITE: iocb.aio_lio_opcode = IOCB_CMD_PWRITE; + err = io_submit(ctx, 1, &iocbp); break; case AIO_MMAP: iocb.aio_lio_opcode = IOCB_CMD_PREAD; iocb.aio_buf = (unsigned long) &c; iocb.aio_nbytes = sizeof(c); + err = io_submit(ctx, 1, &iocbp); break; default: - printk("Bogus op in do_aio - %d\n", aio->type); + printk("Bogus op in do_aio - %d\n", type); err = -EINVAL; - goto out; + break; } - err = io_submit(ctx, 1, &iocbp); if(err > 0) err = 0; else err = -errno; - out: return err; } @@ -129,9 +117,8 @@ static aio_context_t ctx = 0; static int aio_thread(void *arg) { struct aio_thread_reply reply; - struct aio_context *aio; struct io_event event; - int err, n; + int err, n, reply_fd; signal(SIGWINCH, SIG_IGN); @@ -144,22 +131,14 @@ static int aio_thread(void *arg) "errno = %d\n", errno); } else { - /* This is safe as we've just a pointer here. */ - aio = (struct aio_context *) (long) event.data; - if(update_aio(aio, event.res)){ - do_aio(ctx, aio); - continue; - } - reply = ((struct aio_thread_reply) - { .data = aio, - .err = aio->len }); - err = os_write_file(aio->reply_fd, &reply, - sizeof(reply)); + { .data = (void *) (long) event.data, + .err = event.res }); + reply_fd = ((struct aio_context *) reply.data)->reply_fd; + err = os_write_file(reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) - printk("aio_thread - write failed, " - "fd = %d, err = %d\n", aio->reply_fd, - -err); + printk("aio_thread - write failed, fd = %d, " + "err = %d\n", aio_req_fd_r, -err); } } return 0; @@ -167,35 +146,35 @@ static int aio_thread(void *arg) #endif -static int do_not_aio(struct aio_context *aio) +static int do_not_aio(struct aio_thread_req *req) { char c; int err; - switch(aio->type){ + switch(req->type){ case AIO_READ: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_read_file(aio->fd, aio->data, aio->len); + err = os_read_file(req->io_fd, req->buf, req->len); break; case AIO_WRITE: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_write_file(aio->fd, aio->data, aio->len); + err = os_write_file(req->io_fd, req->buf, req->len); break; case AIO_MMAP: - err = os_seek_file(aio->fd, aio->offset); + err = os_seek_file(req->io_fd, req->offset); if(err) goto out; - err = os_read_file(aio->fd, &c, sizeof(c)); + err = os_read_file(req->io_fd, &c, sizeof(c)); break; default: - printk("do_not_aio - bad request type : %d\n", aio->type); + printk("do_not_aio - bad request type : %d\n", req->type); err = -EINVAL; break; } @@ -206,14 +185,14 @@ static int do_not_aio(struct aio_context *aio) static int not_aio_thread(void *arg) { - struct aio_context *aio; + struct aio_thread_req req; struct aio_thread_reply reply; int err; signal(SIGWINCH, SIG_IGN); while(1){ - err = os_read_file(aio_req_fd_r, &aio, sizeof(aio)); - if(err != sizeof(aio)){ + err = os_read_file(aio_req_fd_r, &req, sizeof(req)); + if(err != sizeof(req)){ if(err < 0) printk("not_aio_thread - read failed, " "fd = %d, err = %d\n", aio_req_fd_r, @@ -224,34 +203,17 @@ static int not_aio_thread(void *arg) } continue; } - again: - err = do_not_aio(aio); - - if(update_aio(aio, err)) - goto again; - - reply = ((struct aio_thread_reply) { .data = aio, - .err = aio->len }); - err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + err = do_not_aio(&req); + reply = ((struct aio_thread_reply) { .data = req.aio, + .err = err }); + err = os_write_file(req.aio->reply_fd, &reply, sizeof(reply)); if(err != sizeof(reply)) printk("not_aio_thread - write failed, fd = %d, " "err = %d\n", aio_req_fd_r, -err); } } -static int submit_aio_24(struct aio_context *aio) -{ - int err; - - err = os_write_file(aio_req_fd_w, &aio, sizeof(aio)); - if(err == sizeof(aio)) - err = 0; - - return err; -} - static int aio_pid = -1; -static int (*submit_proc)(struct aio_context *aio); static int init_aio_24(void) { @@ -283,33 +245,11 @@ static int init_aio_24(void) #endif printk("2.6 host AIO support not used - falling back to I/O " "thread\n"); - - submit_proc = submit_aio_24; - return 0; } #ifdef HAVE_AIO_ABI #define DEFAULT_24_AIO 0 -static int submit_aio_26(struct aio_context *aio) -{ - struct aio_thread_reply reply; - int err; - - err = do_aio(ctx, aio); - if(err){ - reply = ((struct aio_thread_reply) { .data = aio, - .err = err }); - err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); - if(err != sizeof(reply)) - printk("submit_aio_26 - write failed, " - "fd = %d, err = %d\n", aio->reply_fd, -err); - else err = 0; - } - - return err; -} - static int init_aio_26(void) { unsigned long stack; @@ -330,22 +270,39 @@ static int init_aio_26(void) aio_pid = err; printk("Using 2.6 host AIO\n"); + return 0; +} + +static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) +{ + struct aio_thread_reply reply; + int err; - submit_proc = submit_aio_26; + err = do_aio(ctx, type, io_fd, buf, len, offset, aio); + if(err){ + reply = ((struct aio_thread_reply) { .data = aio, + .err = err }); + err = os_write_file(aio->reply_fd, &reply, sizeof(reply)); + if(err != sizeof(reply)) + printk("submit_aio_26 - write failed, " + "fd = %d, err = %d\n", aio->reply_fd, -err); + else err = 0; + } - return 0; + return err; } #else #define DEFAULT_24_AIO 1 -static int submit_aio_26(struct aio_context *aio) +static int init_aio_26(void) { return -ENOSYS; } -static int init_aio_26(void) +static int submit_aio_26(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) { - submit_proc = submit_aio_26; return -ENOSYS; } #endif @@ -412,7 +369,33 @@ static void exit_aio(void) __uml_exitcall(exit_aio); -int submit_aio(struct aio_context *aio) +static int submit_aio_24(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, struct aio_context *aio) { - return (*submit_proc)(aio); + struct aio_thread_req req = { .type = type, + .io_fd = io_fd, + .offset = offset, + .buf = buf, + .len = len, + .aio = aio, + }; + int err; + + err = os_write_file(aio_req_fd_w, &req, sizeof(req)); + if(err == sizeof(req)) + err = 0; + + return err; +} + +int submit_aio(enum aio_type type, int io_fd, char *buf, int len, + unsigned long long offset, int reply_fd, + struct aio_context *aio) +{ + aio->reply_fd = reply_fd; + if(aio_24) + return submit_aio_24(type, io_fd, buf, len, offset, aio); + else { + return submit_aio_26(type, io_fd, buf, len, offset, aio); + } } diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index 6af83171ca4..b99ab414542 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -143,11 +143,22 @@ static int __init skas0_cmd_param(char *str, int* add) return 0; } +/* The two __uml_setup would conflict, without this stupid alias. */ + +static int __init mode_skas0_cmd_param(char *str, int* add) + __attribute__((alias("skas0_cmd_param"))); + __uml_setup("skas0", skas0_cmd_param, "skas0\n" " Disables SKAS3 usage, so that SKAS0 is used, unless \n" " you specify mode=tt.\n\n"); +__uml_setup("mode=skas0", mode_skas0_cmd_param, + "mode=skas0\n" + " Disables SKAS3 usage, so that SKAS0 is used, unless you \n" + " specify mode=tt. Note that this was recently added - on \n" + " older kernels you must use simply \"skas0\".\n\n"); + static int force_sysemu_disabled = 0; static int __init nosysemu_cmd_param(char *str, int* add) diff --git a/arch/um/scripts/Makefile.rules b/arch/um/scripts/Makefile.rules index 59a1291f477..651d9d88b65 100644 --- a/arch/um/scripts/Makefile.rules +++ b/arch/um/scripts/Makefile.rules @@ -7,8 +7,8 @@ USER_SINGLE_OBJS := \ USER_OBJS += $(filter %_user.o,$(obj-y) $(obj-m) $(USER_SINGLE_OBJS)) USER_OBJS := $(foreach file,$(USER_OBJS),$(obj)/$(file)) -$(USER_OBJS) : c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) \ - $(CFLAGS_$(notdir $@)) +$(USER_OBJS) $(USER_OBJS:.o=.i) $(USER_OBJS:.o=.s) $(USER_OBJS:.o=.lst): \ + c_flags = -Wp,-MD,$(depfile) $(USER_CFLAGS) $(CFLAGS_$(notdir $@)) $(USER_OBJS): cmd_checksrc = $(USER_OBJS): quiet_cmd_checksrc = $(USER_OBJS): cmd_force_checksrc = diff --git a/arch/um/sys-x86_64/stub_segv.c b/arch/um/sys-x86_64/stub_segv.c index 65a131b362b..d1e53bdf2e8 100644 --- a/arch/um/sys-x86_64/stub_segv.c +++ b/arch/um/sys-x86_64/stub_segv.c @@ -10,6 +10,22 @@ #include "uml-config.h" #include "sysdep/sigcontext.h" #include "sysdep/faultinfo.h" +#include <stddef.h> + +/* Copied from sys-x86_64/signal.c - Can't find an equivalent definition + * in the libc headers anywhere. + */ +struct rt_sigframe +{ + char *pretcode; + struct ucontext uc; + struct siginfo info; +}; + +/* Copied here from <linux/kernel.h> - we're userspace. */ +#define container_of(ptr, type, member) ({ \ + const typeof( ((type *)0)->member ) *__mptr = (ptr); \ + (type *)( (char *)__mptr - offsetof(type,member) );}) void __attribute__ ((__section__ (".__syscall_stub"))) stub_segv_handler(int sig) @@ -17,16 +33,19 @@ stub_segv_handler(int sig) struct ucontext *uc; __asm__("movq %%rdx, %0" : "=g" (uc) :); - GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), - &uc->uc_mcontext); + GET_FAULTINFO_FROM_SC(*((struct faultinfo *) UML_CONFIG_STUB_DATA), + &uc->uc_mcontext); - __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid)); + __asm__("movq %0, %%rax ; syscall": : "g" (__NR_getpid)); __asm__("movq %%rax, %%rdi ; movq %0, %%rax ; movq %1, %%rsi ;" - "syscall": : "g" (__NR_kill), "g" (SIGUSR1)); - /* Two popqs to restore the stack to the state just before entering - * the handler, one pops the return address, the other pops the frame - * pointer. + "syscall": : "g" (__NR_kill), "g" (SIGUSR1) : + "%rdi", "%rax", "%rsi"); + /* sys_sigreturn expects that the stack pointer will be 8 bytes into + * the signal frame. So, we use the ucontext pointer, which we know + * already, to get the signal frame pointer, and add 8 to that. */ - __asm__("popq %%rax ; popq %%rax ; movq %0, %%rax ; syscall" : : "g" - (__NR_rt_sigreturn)); + __asm__("movq %0, %%rsp": : + "g" ((unsigned long) container_of(uc, struct rt_sigframe, + uc) + 8)); + __asm__("movq %0, %%rax ; syscall" : : "g" (__NR_rt_sigreturn)); } diff --git a/arch/x86_64/ia32/ia32_signal.c b/arch/x86_64/ia32/ia32_signal.c index 66e2821533d..0903cc1faef 100644 --- a/arch/x86_64/ia32/ia32_signal.c +++ b/arch/x86_64/ia32/ia32_signal.c @@ -425,7 +425,11 @@ get_sigframe(struct k_sigaction *ka, struct pt_regs * regs, size_t frame_size) rsp = (unsigned long) ka->sa.sa_restorer; } - return (void __user *)((rsp - frame_size) & -8UL); + rsp -= frame_size; + /* Align the stack pointer according to the i386 ABI, + * i.e. so that on function entry ((sp + 4) & 15) == 0. */ + rsp = ((rsp + 4) & -16ul) - 4; + return (void __user *) rsp; } int ia32_setup_frame(int sig, struct k_sigaction *ka, diff --git a/arch/x86_64/kernel/setup64.c b/arch/x86_64/kernel/setup64.c index bd33be24a38..79190891fbc 100644 --- a/arch/x86_64/kernel/setup64.c +++ b/arch/x86_64/kernel/setup64.c @@ -87,6 +87,10 @@ void __init setup_per_cpu_areas(void) int i; unsigned long size; +#ifdef CONFIG_HOTPLUG_CPU + prefill_possible_map(); +#endif + /* Copy section for each CPU (we discard the original) */ size = ALIGN(__per_cpu_end - __per_cpu_start, SMP_CACHE_BYTES); #ifdef CONFIG_MODULES diff --git a/arch/x86_64/kernel/smpboot.c b/arch/x86_64/kernel/smpboot.c index e12d7baeb33..658a81b33f3 100644 --- a/arch/x86_64/kernel/smpboot.c +++ b/arch/x86_64/kernel/smpboot.c @@ -892,7 +892,7 @@ static __init void disable_smp(void) * those NR_CPUS, hence cpu_possible_map represents entire NR_CPUS range. * - Ashok Raj */ -static void prefill_possible_map(void) +__init void prefill_possible_map(void) { int i; for (i = 0; i < NR_CPUS; i++) @@ -967,10 +967,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) current_cpu_data = boot_cpu_data; current_thread_info()->cpu = 0; /* needed? */ -#ifdef CONFIG_HOTPLUG_CPU - prefill_possible_map(); -#endif - if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); diff --git a/arch/x86_64/kernel/suspend.c b/arch/x86_64/kernel/suspend.c index ebb9abf3ce6..f066c6ab361 100644 --- a/arch/x86_64/kernel/suspend.c +++ b/arch/x86_64/kernel/suspend.c @@ -11,6 +11,8 @@ #include <linux/smp.h> #include <linux/suspend.h> #include <asm/proto.h> +#include <asm/page.h> +#include <asm/pgtable.h> struct saved_context saved_context; @@ -140,4 +142,129 @@ void fix_processor_context(void) } +#ifdef CONFIG_SOFTWARE_SUSPEND +/* Defined in arch/x86_64/kernel/suspend_asm.S */ +extern int restore_image(void); +pgd_t *temp_level4_pgt; + +static void **pages; + +static inline void *__add_page(void) +{ + void **c; + + c = (void **)get_usable_page(GFP_ATOMIC); + if (c) { + *c = pages; + pages = c; + } + return c; +} + +static inline void *__next_page(void) +{ + void **c; + + c = pages; + if (c) { + pages = *c; + *c = NULL; + } + return c; +} + +/* + * Try to allocate as many usable pages as needed and daisy chain them. + * If one allocation fails, free the pages allocated so far + */ +static int alloc_usable_pages(unsigned long n) +{ + void *p; + + pages = NULL; + do + if (!__add_page()) + break; + while (--n); + if (n) { + p = __next_page(); + while (p) { + free_page((unsigned long)p); + p = __next_page(); + } + return -ENOMEM; + } + return 0; +} + +static void res_phys_pud_init(pud_t *pud, unsigned long address, unsigned long end) +{ + long i, j; + + i = pud_index(address); + pud = pud + i; + for (; i < PTRS_PER_PUD; pud++, i++) { + unsigned long paddr; + pmd_t *pmd; + + paddr = address + i*PUD_SIZE; + if (paddr >= end) + break; + + pmd = (pmd_t *)__next_page(); + set_pud(pud, __pud(__pa(pmd) | _KERNPG_TABLE)); + for (j = 0; j < PTRS_PER_PMD; pmd++, j++, paddr += PMD_SIZE) { + unsigned long pe; + + if (paddr >= end) + break; + pe = _PAGE_NX | _PAGE_PSE | _KERNPG_TABLE | paddr; + pe &= __supported_pte_mask; + set_pmd(pmd, __pmd(pe)); + } + } +} + +static void set_up_temporary_mappings(void) +{ + unsigned long start, end, next; + + temp_level4_pgt = (pgd_t *)__next_page(); + + /* It is safe to reuse the original kernel mapping */ + set_pgd(temp_level4_pgt + pgd_index(__START_KERNEL_map), + init_level4_pgt[pgd_index(__START_KERNEL_map)]); + + /* Set up the direct mapping from scratch */ + start = (unsigned long)pfn_to_kaddr(0); + end = (unsigned long)pfn_to_kaddr(end_pfn); + + for (; start < end; start = next) { + pud_t *pud = (pud_t *)__next_page(); + next = start + PGDIR_SIZE; + if (next > end) + next = end; + res_phys_pud_init(pud, __pa(start), __pa(next)); + set_pgd(temp_level4_pgt + pgd_index(start), + mk_kernel_pgd(__pa(pud))); + } +} + +int swsusp_arch_resume(void) +{ + unsigned long n; + + n = ((end_pfn << PAGE_SHIFT) + PUD_SIZE - 1) >> PUD_SHIFT; + n += (n + PTRS_PER_PUD - 1) / PTRS_PER_PUD + 1; + pr_debug("swsusp_arch_resume(): pages needed = %lu\n", n); + if (alloc_usable_pages(n)) { + free_eaten_memory(); + return -ENOMEM; + } + /* We have got enough memory and from now on we cannot recover */ + set_up_temporary_mappings(); + restore_image(); + return 0; +} +#endif /* CONFIG_SOFTWARE_SUSPEND */ diff --git a/arch/x86_64/kernel/suspend_asm.S b/arch/x86_64/kernel/suspend_asm.S index 4d659e97df1..320b6fb00cc 100644 --- a/arch/x86_64/kernel/suspend_asm.S +++ b/arch/x86_64/kernel/suspend_asm.S @@ -39,12 +39,13 @@ ENTRY(swsusp_arch_suspend) call swsusp_save ret -ENTRY(swsusp_arch_resume) - /* set up cr3 */ - leaq init_level4_pgt(%rip),%rax - subq $__START_KERNEL_map,%rax - movq %rax,%cr3 - +ENTRY(restore_image) + /* switch to temporary page tables */ + movq $__PAGE_OFFSET, %rdx + movq temp_level4_pgt(%rip), %rax + subq %rdx, %rax + movq %rax, %cr3 + /* Flush TLB */ movq mmu_cr4_features(%rip), %rax movq %rax, %rdx andq $~(1<<7), %rdx # PGE @@ -69,6 +70,10 @@ loop: movq pbe_next(%rdx), %rdx jmp loop done: + /* go back to the original page tables */ + leaq init_level4_pgt(%rip), %rax + subq $__START_KERNEL_map, %rax + movq %rax, %cr3 /* Flush TLB, including "global" things (vmalloc) */ movq mmu_cr4_features(%rip), %rax movq %rax, %rdx diff --git a/arch/x86_64/mm/pageattr.c b/arch/x86_64/mm/pageattr.c index 94862e1ec03..b90e8fe9eeb 100644 --- a/arch/x86_64/mm/pageattr.c +++ b/arch/x86_64/mm/pageattr.c @@ -220,8 +220,6 @@ void global_flush_tlb(void) down_read(&init_mm.mmap_sem); df = xchg(&df_list, NULL); up_read(&init_mm.mmap_sem); - if (!df) - return; flush_map((df && !df->next) ? df->address : 0); for (; df; df = next_df) { next_df = df->next; |