diff options
Diffstat (limited to 'arch/xtensa/platforms')
| -rw-r--r-- | arch/xtensa/platforms/xt2000/Makefile | 5 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/include/platform/hardware.h | 55 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/include/platform/serial.h | 28 | ||||
| -rw-r--r-- | arch/xtensa/platforms/xt2000/setup.c | 181 |
4 files changed, 269 insertions, 0 deletions
diff --git a/arch/xtensa/platforms/xt2000/Makefile b/arch/xtensa/platforms/xt2000/Makefile new file mode 100644 index 00000000000..54d018e45bf --- /dev/null +++ b/arch/xtensa/platforms/xt2000/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for the Tensilica XT2000 Emulation Board +# + +obj-y = setup.o diff --git a/arch/xtensa/platforms/xt2000/include/platform/hardware.h b/arch/xtensa/platforms/xt2000/include/platform/hardware.h new file mode 100644 index 00000000000..41459ad0776 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/hardware.h @@ -0,0 +1,55 @@ +/* + * platform/hardware.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +/* + * This file contains the hardware configuration of the XT2000 board. + */ + +#ifndef _XTENSA_XT2000_HARDWARE_H +#define _XTENSA_XT2000_HARDWARE_H + +#include <variant/core.h> +#include <asm/io.h> + +/* + * Memory configuration. + */ + +#define PLATFORM_DEFAULT_MEM_START 0x00000000 +#define PLATFORM_DEFAULT_MEM_SIZE 0x08000000 + +/* + * Number of platform IRQs + */ +#define PLATFORM_NR_IRQS 3 +/* + * On-board components. + */ + +#define SONIC83934_INTNUM XCHAL_EXTINT3_NUM +#define SONIC83934_ADDR IOADDR(0x0d030000) + +/* + * V3-PCI + */ + +/* The XT2000 uses the V3 as a cascaded interrupt controller for the PCI bus */ + +#define IRQ_PCI_A (XCHAL_NUM_INTERRUPTS + 0) +#define IRQ_PCI_B (XCHAL_NUM_INTERRUPTS + 1) +#define IRQ_PCI_C (XCHAL_NUM_INTERRUPTS + 2) + +/* + * Various other components. + */ + +#define XT2000_LED_ADDR IOADDR(0x0d040000) + +#endif /* _XTENSA_XT2000_HARDWARE_H */ diff --git a/arch/xtensa/platforms/xt2000/include/platform/serial.h b/arch/xtensa/platforms/xt2000/include/platform/serial.h new file mode 100644 index 00000000000..7226cf732b4 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/include/platform/serial.h @@ -0,0 +1,28 @@ +/* + * platform/serial.h + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2001 Tensilica Inc. + */ + +#ifndef _XTENSA_XT2000_SERIAL_H +#define _XTENSA_XT2000_SERIAL_H + +#include <variant/core.h> +#include <asm/io.h> + +/* National-Semi PC16552D DUART: */ + +#define DUART16552_1_INTNUM XCHAL_EXTINT4_NUM +#define DUART16552_2_INTNUM XCHAL_EXTINT5_NUM + +#define DUART16552_1_ADDR IOADDR(0x0d050020) /* channel 1 */ +#define DUART16552_2_ADDR IOADDR(0x0d050000) /* channel 2 */ + +#define DUART16552_XTAL_FREQ 18432000 /* crystal frequency in Hz */ +#define BASE_BAUD ( DUART16552_XTAL_FREQ / 16 ) + +#endif /* _XTENSA_XT2000_SERIAL_H */ diff --git a/arch/xtensa/platforms/xt2000/setup.c b/arch/xtensa/platforms/xt2000/setup.c new file mode 100644 index 00000000000..9e83940ac26 --- /dev/null +++ b/arch/xtensa/platforms/xt2000/setup.c @@ -0,0 +1,181 @@ +/* + * arch/xtensa/platforms/xt2000/setup.c + * + * Platform specific functions for the XT2000 board. + * + * Authors: Chris Zankel <chris@zankel.net> + * Joe Taylor <joe@tensilica.com> + * + * Copyright 2001 - 2004 Tensilica Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/stringify.h> +#include <linux/platform_device.h> +#include <linux/serial.h> +#include <linux/serial_8250.h> + +#include <asm/processor.h> +#include <asm/platform.h> +#include <asm/bootparam.h> +#include <platform/hardware.h> +#include <platform/serial.h> + +/* Assumes s points to an 8-chr string. No checking for NULL. */ + +static void led_print (int f, char *s) +{ + unsigned long* led_addr = (unsigned long*) (XT2000_LED_ADDR + 0xE0) + f; + int i; + for (i = f; i < 8; i++) + if ((*led_addr++ = *s++) == 0) + break; +} + +void platform_halt(void) +{ + led_print (0, " HALT "); + local_irq_disable(); + while (1); +} + +void platform_power_off(void) +{ + led_print (0, "POWEROFF"); + local_irq_disable(); + while (1); +} + +void platform_restart(void) +{ + /* Flush and reset the mmu, simulate a processor reset, and + * jump to the reset vector. */ + + __asm__ __volatile__ ("movi a2, 15\n\t" + "wsr a2, " __stringify(ICOUNTLEVEL) "\n\t" + "movi a2, 0\n\t" + "wsr a2, " __stringify(ICOUNT) "\n\t" + "wsr a2, " __stringify(IBREAKENABLE) "\n\t" + "wsr a2, " __stringify(LCOUNT) "\n\t" + "movi a2, 0x1f\n\t" + "wsr a2, " __stringify(PS) "\n\t" + "isync\n\t" + "jx %0\n\t" + : + : "a" (XCHAL_RESET_VECTOR_VADDR) + : "a2" + ); + + /* control never gets here */ +} + +void __init platform_setup(char** cmdline) +{ + led_print (0, "LINUX "); +} + +/* early initialization */ + +extern sysmem_info_t __initdata sysmem; + +void platform_init(bp_tag_t* first) +{ + /* Set default memory block if not provided by the bootloader. */ + + if (sysmem.nr_banks == 0) { + sysmem.nr_banks = 1; + sysmem.bank[0].start = PLATFORM_DEFAULT_MEM_START; + sysmem.bank[0].end = PLATFORM_DEFAULT_MEM_START + + PLATFORM_DEFAULT_MEM_SIZE; + } +} + +/* Heartbeat. Let the LED blink. */ + +void platform_heartbeat(void) +{ + static int i=0, t = 0; + + if (--t < 0) + { + t = 59; + led_print(7, i ? ".": " "); + i ^= 1; + } +} + +//#define RS_TABLE_SIZE 2 +//#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF|ASYNC_SKIP_TEST) + +#define _SERIAL_PORT(_base,_irq) \ +{ \ + .mapbase = (_base), \ + .membase = (void*)(_base), \ + .irq = (_irq), \ + .uartclk = DUART16552_XTAL_FREQ, \ + .iotype = UPIO_MEM, \ + .flags = UPF_BOOT_AUTOCONF, \ + .regshift = 2, \ +} + +static struct plat_serial8250_port xt2000_serial_data[] = { +#if XCHAL_HAVE_BE + _SERIAL_PORT(DUART16552_1_ADDR + 3, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR + 3, DUART16552_2_INTNUM), +#else + _SERIAL_PORT(DUART16552_1_ADDR, DUART16552_1_INTNUM), + _SERIAL_PORT(DUART16552_2_ADDR, DUART16552_2_INTNUM), +#endif + { } +}; + +static struct platform_device xt2000_serial8250_device = { + .name = "serial8250", + .id = PLAT8250_DEV_PLATFORM, + .dev = { + .platform_data = xt2000_serial_data, + }, +}; + +static struct resource xt2000_sonic_res[] = { + { + .start = SONIC83934_ADDR, + .end = SONIC83934_ADDR + 0xff, + .flags = IORESOURCE_MEM, + }, + { + .start = SONIC83934_INTNUM, + .end = SONIC83934_INTNUM, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device xt2000_sonic_device = { + .name = "xtsonic", + .num_resources = ARRAY_SIZE(xt2000_sonic_res), + .resource = xt2000_sonic_res, +}; + +static int __init xt2000_setup_devinit(void) +{ + platform_device_register(&xt2000_serial8250_device); + platform_device_register(&xt2000_sonic_device); + + return 0; +} + +device_initcall(xt2000_setup_devinit); |