diff options
Diffstat (limited to 'arch/x86_64/kernel/io_apic.c')
| -rw-r--r-- | arch/x86_64/kernel/io_apic.c | 1845 |
1 files changed, 0 insertions, 1845 deletions
diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c deleted file mode 100644 index 0491019d4c8..00000000000 --- a/arch/x86_64/kernel/io_apic.c +++ /dev/null @@ -1,1845 +0,0 @@ -/* - * Intel IO-APIC support for multi-Pentium hosts. - * - * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo - * - * Many thanks to Stig Venaas for trying out countless experimental - * patches and reporting/debugging problems patiently! - * - * (c) 1999, Multiple IO-APIC support, developed by - * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and - * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, - * further tested and cleaned up by Zach Brown <zab@redhat.com> - * and Ingo Molnar <mingo@redhat.com> - * - * Fixes - * Maciej W. Rozycki : Bits for genuine 82489DX APICs; - * thanks to Eric Gilmore - * and Rolf G. Tews - * for testing these extensively - * Paul Diefenbaugh : Added full ACPI support - */ - -#include <linux/mm.h> -#include <linux/interrupt.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/sched.h> -#include <linux/smp_lock.h> -#include <linux/mc146818rtc.h> -#include <linux/acpi.h> -#include <linux/sysdev.h> -#ifdef CONFIG_ACPI -#include <acpi/acpi_bus.h> -#endif - -#include <asm/io.h> -#include <asm/smp.h> -#include <asm/desc.h> -#include <asm/proto.h> -#include <asm/mach_apic.h> -#include <asm/acpi.h> -#include <asm/dma.h> -#include <asm/nmi.h> - -#define __apicdebuginit __init - -int sis_apic_bug; /* not actually supported, dummy for compile */ - -static int no_timer_check; - -static int disable_timer_pin_1 __initdata; - -int timer_over_8254 __initdata = 0; - -/* Where if anywhere is the i8259 connect in external int mode */ -static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; - -static DEFINE_SPINLOCK(ioapic_lock); -static DEFINE_SPINLOCK(vector_lock); - -/* - * # of IRQ routing registers - */ -int nr_ioapic_registers[MAX_IO_APICS]; - -/* - * Rough estimation of how many shared IRQs there are, can - * be changed anytime. - */ -#define MAX_PLUS_SHARED_IRQS NR_IRQ_VECTORS -#define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) - -/* - * This is performance-critical, we want to do it O(1) - * - * the indexing order of this array favors 1:1 mappings - * between pins and IRQs. - */ - -static struct irq_pin_list { - short apic, pin, next; -} irq_2_pin[PIN_MAP_SIZE]; - -int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; -#ifdef CONFIG_PCI_MSI -#define vector_to_irq(vector) \ - (platform_legacy_irq(vector) ? vector : vector_irq[vector]) -#else -#define vector_to_irq(vector) (vector) -#endif - -#define __DO_ACTION(R, ACTION, FINAL) \ - \ -{ \ - int pin; \ - struct irq_pin_list *entry = irq_2_pin + irq; \ - \ - BUG_ON(irq >= NR_IRQS); \ - for (;;) { \ - unsigned int reg; \ - pin = entry->pin; \ - if (pin == -1) \ - break; \ - reg = io_apic_read(entry->apic, 0x10 + R + pin*2); \ - reg ACTION; \ - io_apic_modify(entry->apic, reg); \ - if (!entry->next) \ - break; \ - entry = irq_2_pin + entry->next; \ - } \ - FINAL; \ -} - -union entry_union { - struct { u32 w1, w2; }; - struct IO_APIC_route_entry entry; -}; - -static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) -{ - union entry_union eu; - unsigned long flags; - spin_lock_irqsave(&ioapic_lock, flags); - eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); - eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - return eu.entry; -} - -static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) -{ - unsigned long flags; - union entry_union eu; - eu.entry = e; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x10 + 2*pin, eu.w1); - io_apic_write(apic, 0x11 + 2*pin, eu.w2); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -#ifdef CONFIG_SMP -static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t mask) -{ - unsigned long flags; - unsigned int dest; - cpumask_t tmp; - - cpus_and(tmp, mask, cpu_online_map); - if (cpus_empty(tmp)) - tmp = TARGET_CPUS; - - cpus_and(mask, tmp, CPU_MASK_ALL); - - dest = cpu_mask_to_apicid(mask); - - /* - * Only the high 8 bits are valid. - */ - dest = SET_APIC_LOGICAL_ID(dest); - - spin_lock_irqsave(&ioapic_lock, flags); - __DO_ACTION(1, = dest, ) - set_irq_info(irq, mask); - spin_unlock_irqrestore(&ioapic_lock, flags); -} -#endif - -static u8 gsi_2_irq[NR_IRQ_VECTORS] = { [0 ... NR_IRQ_VECTORS-1] = 0xFF }; - -/* - * The common case is 1:1 IRQ<->pin mappings. Sometimes there are - * shared ISA-space IRQs, so we have to support them. We are super - * fast in the common case, and fast for shared ISA-space IRQs. - */ -static void add_pin_to_irq(unsigned int irq, int apic, int pin) -{ - static int first_free_entry = NR_IRQS; - struct irq_pin_list *entry = irq_2_pin + irq; - - BUG_ON(irq >= NR_IRQS); - while (entry->next) - entry = irq_2_pin + entry->next; - - if (entry->pin != -1) { - entry->next = first_free_entry; - entry = irq_2_pin + entry->next; - if (++first_free_entry >= PIN_MAP_SIZE) - panic("io_apic.c: ran out of irq_2_pin entries!"); - } - entry->apic = apic; - entry->pin = pin; -} - - -#define DO_ACTION(name,R,ACTION, FINAL) \ - \ - static void name##_IO_APIC_irq (unsigned int irq) \ - __DO_ACTION(R, ACTION, FINAL) - -DO_ACTION( __mask, 0, |= 0x00010000, io_apic_sync(entry->apic) ) - /* mask = 1 */ -DO_ACTION( __unmask, 0, &= 0xfffeffff, ) - /* mask = 0 */ - -static void mask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __mask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void unmask_IO_APIC_irq (unsigned int irq) -{ - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) -{ - struct IO_APIC_route_entry entry; - - /* Check delivery_mode to be sure we're not clearing an SMI pin */ - entry = ioapic_read_entry(apic, pin); - if (entry.delivery_mode == dest_SMI) - return; - /* - * Disable it in the IO-APIC irq-routing table: - */ - memset(&entry, 0, sizeof(entry)); - entry.mask = 1; - ioapic_write_entry(apic, pin, entry); -} - -static void clear_IO_APIC (void) -{ - int apic, pin; - - for (apic = 0; apic < nr_ioapics; apic++) - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) - clear_IO_APIC_pin(apic, pin); -} - -int skip_ioapic_setup; -int ioapic_force; - -/* dummy parsing: see setup.c */ - -static int __init disable_ioapic_setup(char *str) -{ - skip_ioapic_setup = 1; - return 0; -} -early_param("noapic", disable_ioapic_setup); - -/* Actually the next is obsolete, but keep it for paranoid reasons -AK */ -static int __init disable_timer_pin_setup(char *arg) -{ - disable_timer_pin_1 = 1; - return 1; -} -__setup("disable_timer_pin_1", disable_timer_pin_setup); - -static int __init setup_disable_8254_timer(char *s) -{ - timer_over_8254 = -1; - return 1; -} -static int __init setup_enable_8254_timer(char *s) -{ - timer_over_8254 = 2; - return 1; -} - -__setup("disable_8254_timer", setup_disable_8254_timer); -__setup("enable_8254_timer", setup_enable_8254_timer); - - -/* - * Find the IRQ entry number of a certain pin. - */ -static int find_irq_entry(int apic, int pin, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_irqtype == type && - (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && - mp_irqs[i].mpc_dstirq == pin) - return i; - - return -1; -} - -/* - * Find the pin to which IRQ[irq] (ISA) is connected - */ -static int __init find_isa_irq_pin(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - - return mp_irqs[i].mpc_dstirq; - } - return -1; -} - -static int __init find_isa_irq_apic(int irq, int type) -{ - int i; - - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mpc_irqtype == type) && - (mp_irqs[i].mpc_srcbusirq == irq)) - break; - } - if (i < mp_irq_entries) { - int apic; - for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic) - return apic; - } - } - - return -1; -} - -/* - * Find a specific PCI IRQ entry. - * Not an __init, possibly needed by modules - */ -static int pin_2_irq(int idx, int apic, int pin); - -int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) -{ - int apic, i, best_guess = -1; - - apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", - bus, slot, pin); - if (mp_bus_id_to_pci_bus[bus] == -1) { - apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); - return -1; - } - for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mpc_srcbus; - - for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || - mp_irqs[i].mpc_dstapic == MP_APIC_ALL) - break; - - if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mpc_irqtype && - (bus == lbus) && - (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); - - if (!(apic || IO_APIC_IRQ(irq))) - continue; - - if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) - return irq; - /* - * Use the first all-but-pin matching entry as a - * best-guess fuzzy result for broken mptables. - */ - if (best_guess < 0) - best_guess = irq; - } - } - BUG_ON(best_guess >= NR_IRQS); - return best_guess; -} - -/* ISA interrupts are always polarity zero edge triggered, - * when listed as conforming in the MP table. */ - -#define default_ISA_trigger(idx) (0) -#define default_ISA_polarity(idx) (0) - -/* PCI interrupts are always polarity one level triggered, - * when listed as conforming in the MP table. */ - -#define default_PCI_trigger(idx) (1) -#define default_PCI_polarity(idx) (1) - -static int __init MPBIOS_polarity(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int polarity; - - /* - * Determine IRQ line polarity (high active or low active): - */ - switch (mp_irqs[idx].mpc_irqflag & 3) - { - case 0: /* conforms, ie. bus-type dependent polarity */ - if (test_bit(bus, mp_bus_not_pci)) - polarity = default_ISA_polarity(idx); - else - polarity = default_PCI_polarity(idx); - break; - case 1: /* high active */ - { - polarity = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - case 3: /* low active */ - { - polarity = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - polarity = 1; - break; - } - } - return polarity; -} - -static int MPBIOS_trigger(int idx) -{ - int bus = mp_irqs[idx].mpc_srcbus; - int trigger; - - /* - * Determine IRQ trigger mode (edge or level sensitive): - */ - switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) - { - case 0: /* conforms, ie. bus-type dependent */ - if (test_bit(bus, mp_bus_not_pci)) - trigger = default_ISA_trigger(idx); - else - trigger = default_PCI_trigger(idx); - break; - case 1: /* edge */ - { - trigger = 0; - break; - } - case 2: /* reserved */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 1; - break; - } - case 3: /* level */ - { - trigger = 1; - break; - } - default: /* invalid */ - { - printk(KERN_WARNING "broken BIOS!!\n"); - trigger = 0; - break; - } - } - return trigger; -} - -static inline int irq_polarity(int idx) -{ - return MPBIOS_polarity(idx); -} - -static inline int irq_trigger(int idx) -{ - return MPBIOS_trigger(idx); -} - -static int next_irq = 16; - -/* - * gsi_irq_sharing -- Name overload! "irq" can be either a legacy IRQ - * in the range 0-15, a linux IRQ in the range 0-223, or a GSI number - * from ACPI, which can reach 800 in large boxen. - * - * Compact the sparse GSI space into a sequential IRQ series and reuse - * vectors if possible. - */ -int gsi_irq_sharing(int gsi) -{ - int i, tries, vector; - - BUG_ON(gsi >= NR_IRQ_VECTORS); - - if (platform_legacy_irq(gsi)) - return gsi; - - if (gsi_2_irq[gsi] != 0xFF) - return (int)gsi_2_irq[gsi]; - - tries = NR_IRQS; - try_again: - vector = assign_irq_vector(gsi); - - /* - * Sharing vectors means sharing IRQs, so scan irq_vectors for previous - * use of vector and if found, return that IRQ. However, we never want - * to share legacy IRQs, which usually have a different trigger mode - * than PCI. - */ - for (i = 0; i < NR_IRQS; i++) - if (IO_APIC_VECTOR(i) == vector) - break; - if (platform_legacy_irq(i)) { - if (--tries >= 0) { - IO_APIC_VECTOR(i) = 0; - goto try_again; - } - panic("gsi_irq_sharing: didn't find an IRQ using vector 0x%02X for GSI %d", vector, gsi); - } - if (i < NR_IRQS) { - gsi_2_irq[gsi] = i; - printk(KERN_INFO "GSI %d sharing vector 0x%02X and IRQ %d\n", - gsi, vector, i); - return i; - } - - i = next_irq++; - BUG_ON(i >= NR_IRQS); - gsi_2_irq[gsi] = i; - IO_APIC_VECTOR(i) = vector; - printk(KERN_INFO "GSI %d assigned vector 0x%02X and IRQ %d\n", - gsi, vector, i); - return i; -} - -static int pin_2_irq(int idx, int apic, int pin) -{ - int irq, i; - int bus = mp_irqs[idx].mpc_srcbus; - - /* - * Debugging check, we are in big trouble if this message pops up! - */ - if (mp_irqs[idx].mpc_dstirq != pin) - printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); - - if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mpc_srcbusirq; - } else { - /* - * PCI IRQs are mapped in order - */ - i = irq = 0; - while (i < apic) - irq += nr_ioapic_registers[i++]; - irq += pin; - irq = gsi_irq_sharing(irq); - } - BUG_ON(irq >= NR_IRQS); - return irq; -} - -static inline int IO_APIC_irq_trigger(int irq) -{ - int apic, idx, pin; - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - idx = find_irq_entry(apic,pin,mp_INT); - if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) - return irq_trigger(idx); - } - } - /* - * nonexistent IRQs are edge default - */ - return 0; -} - -/* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ -u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; - -int assign_irq_vector(int irq) -{ - static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; - unsigned long flags; - int vector; - - BUG_ON(irq != AUTO_ASSIGN && (unsigned)irq >= NR_IRQ_VECTORS); - - spin_lock_irqsave(&vector_lock, flags); - - if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) { - spin_unlock_irqrestore(&vector_lock, flags); - return IO_APIC_VECTOR(irq); - } -next: - current_vector += 8; - if (current_vector == IA32_SYSCALL_VECTOR) - goto next; - - if (current_vector >= FIRST_SYSTEM_VECTOR) { - /* If we run out of vectors on large boxen, must share them. */ - offset = (offset + 1) % 8; - current_vector = FIRST_DEVICE_VECTOR + offset; - } - - vector = current_vector; - vector_irq[vector] = irq; - if (irq != AUTO_ASSIGN) - IO_APIC_VECTOR(irq) = vector; - - spin_unlock_irqrestore(&vector_lock, flags); - - return vector; -} - -extern void (*interrupt[NR_IRQS])(void); -static struct hw_interrupt_type ioapic_level_type; -static struct hw_interrupt_type ioapic_edge_type; - -#define IOAPIC_AUTO -1 -#define IOAPIC_EDGE 0 -#define IOAPIC_LEVEL 1 - -static void ioapic_register_intr(int irq, int vector, unsigned long trigger) -{ - unsigned idx; - - idx = use_pci_vector() && !platform_legacy_irq(irq) ? vector : irq; - - if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || - trigger == IOAPIC_LEVEL) - irq_desc[idx].chip = &ioapic_level_type; - else - irq_desc[idx].chip = &ioapic_edge_type; - set_intr_gate(vector, interrupt[idx]); -} - -static void __init setup_IO_APIC_irqs(void) -{ - struct IO_APIC_route_entry entry; - int apic, pin, idx, irq, first_notcon = 1, vector; - unsigned long flags; - - apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - - /* - * add it to the IO-APIC irq-routing table: - */ - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* enable IRQ */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - - idx = find_irq_entry(apic,pin,mp_INT); - if (idx == -1) { - if (first_notcon) { - apic_printk(APIC_VERBOSE, KERN_DEBUG " IO-APIC (apicid-pin) %d-%d", mp_ioapics[apic].mpc_apicid, pin); - first_notcon = 0; - } else - apic_printk(APIC_VERBOSE, ", %d-%d", mp_ioapics[apic].mpc_apicid, pin); - continue; - } - - entry.trigger = irq_trigger(idx); - entry.polarity = irq_polarity(idx); - - if (irq_trigger(idx)) { - entry.trigger = 1; - entry.mask = 1; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - } - - irq = pin_2_irq(idx, apic, pin); - add_pin_to_irq(irq, apic, pin); - - if (!apic && !IO_APIC_IRQ(irq)) - continue; - - if (IO_APIC_IRQ(irq)) { - vector = assign_irq_vector(irq); - entry.vector = vector; - - ioapic_register_intr(irq, vector, IOAPIC_AUTO); - if (!apic && (irq < 16)) - disable_8259A_irq(irq); - } - ioapic_write_entry(apic, pin, entry); - - spin_lock_irqsave(&ioapic_lock, flags); - set_native_irq_info(irq, TARGET_CPUS); - spin_unlock_irqrestore(&ioapic_lock, flags); - } - } - - if (!first_notcon) - apic_printk(APIC_VERBOSE," not connected.\n"); -} - -/* - * Set up the 8259A-master output pin as broadcast to all - * CPUs. - */ -static void __init setup_ExtINT_IRQ0_pin(unsigned int apic, unsigned int pin, int vector) -{ - struct IO_APIC_route_entry entry; - unsigned long flags; - - memset(&entry,0,sizeof(entry)); - - disable_8259A_irq(0); - - /* mask LVT0 */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - - /* - * We use logical delivery to get the timer IRQ - * to the first CPU. - */ - entry.dest_mode = INT_DEST_MODE; - entry.mask = 0; /* unmask IRQ now */ - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.delivery_mode = INT_DELIVERY_MODE; - entry.polarity = 0; - entry.trigger = 0; - entry.vector = vector; - - /* - * The timer IRQ doesn't have to know that behind the - * scene we have a 8259A-master in AEOI mode ... - */ - irq_desc[0].chip = &ioapic_edge_type; - - /* - * Add it to the IO-APIC irq-routing table: - */ - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); - io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); - spin_unlock_irqrestore(&ioapic_lock, flags); - - enable_8259A_irq(0); -} - -void __init UNEXPECTED_IO_APIC(void) -{ -} - -void __apicdebuginit print_IO_APIC(void) -{ - int apic, i; - union IO_APIC_reg_00 reg_00; - union IO_APIC_reg_01 reg_01; - union IO_APIC_reg_02 reg_02; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); - for (i = 0; i < nr_ioapics; i++) - printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); - - /* - * We are a bit conservative about what we expect. We have to - * know about every hardware change ASAP. - */ - printk(KERN_INFO "testing the IO APIC.......................\n"); - - for (apic = 0; apic < nr_ioapics; apic++) { - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - reg_01.raw = io_apic_read(apic, 1); - if (reg_01.bits.version >= 0x10) - reg_02.raw = io_apic_read(apic, 2); - spin_unlock_irqrestore(&ioapic_lock, flags); - - printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); - printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); - printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); - if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2) - UNEXPECTED_IO_APIC(); - - printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); - printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); - if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */ - (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */ - (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */ - (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */ - (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */ - (reg_01.bits.entries != 0x2E) && - (reg_01.bits.entries != 0x3F) && - (reg_01.bits.entries != 0x03) - ) - UNEXPECTED_IO_APIC(); - - printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); - printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); - if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */ - (reg_01.bits.version != 0x02) && /* 82801BA IO-APICs (ICH2) */ - (reg_01.bits.version != 0x10) && /* oldest IO-APICs */ - (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */ - (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */ - (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */ - ) - UNEXPECTED_IO_APIC(); - if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2) - UNEXPECTED_IO_APIC(); - - if (reg_01.bits.version >= 0x10) { - printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); - printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); - if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2) - UNEXPECTED_IO_APIC(); - } - - printk(KERN_DEBUG ".... IRQ redirection table:\n"); - - printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" - " Stat Dest Deli Vect: \n"); - - for (i = 0; i <= reg_01.bits.entries; i++) { - struct IO_APIC_route_entry entry; - - entry = ioapic_read_entry(apic, i); - - printk(KERN_DEBUG " %02x %03X %02X ", - i, - entry.dest.logical.logical_dest, - entry.dest.physical.physical_dest - ); - - printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", - entry.mask, - entry.trigger, - entry.irr, - entry.polarity, - entry.delivery_status, - entry.dest_mode, - entry.delivery_mode, - entry.vector - ); - } - } - if (use_pci_vector()) - printk(KERN_INFO "Using vector-based indexing\n"); - printk(KERN_DEBUG "IRQ to pin mappings:\n"); - for (i = 0; i < NR_IRQS; i++) { - struct irq_pin_list *entry = irq_2_pin + i; - if (entry->pin < 0) - continue; - if (use_pci_vector() && !platform_legacy_irq(i)) - printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i)); - else - printk(KERN_DEBUG "IRQ%d ", i); - for (;;) { - printk("-> %d:%d", entry->apic, entry->pin); - if (!entry->next) - break; - entry = irq_2_pin + entry->next; - } - printk("\n"); - } - - printk(KERN_INFO ".................................... done.\n"); - - return; -} - -#if 0 - -static __apicdebuginit void print_APIC_bitfield (int base) -{ - unsigned int v; - int i, j; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); - for (i = 0; i < 8; i++) { - v = apic_read(base + i*0x10); - for (j = 0; j < 32; j++) { - if (v & (1<<j)) - printk("1"); - else - printk("0"); - } - printk("\n"); - } -} - -void __apicdebuginit print_local_APIC(void * dummy) -{ - unsigned int v, ver, maxlvt; - - if (apic_verbosity == APIC_QUIET) - return; - - printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", - smp_processor_id(), hard_smp_processor_id()); - v = apic_read(APIC_ID); - printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); - v = apic_read(APIC_LVR); - printk(KERN_INFO "... APIC VERSION: %08x\n", v); - ver = GET_APIC_VERSION(v); - maxlvt = get_maxlvt(); - - v = apic_read(APIC_TASKPRI); - printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); - - v = apic_read(APIC_ARBPRI); - printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, - v & APIC_ARBPRI_MASK); - v = apic_read(APIC_PROCPRI); - printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); - - v = apic_read(APIC_EOI); - printk(KERN_DEBUG "... APIC EOI: %08x\n", v); - v = apic_read(APIC_RRR); - printk(KERN_DEBUG "... APIC RRR: %08x\n", v); - v = apic_read(APIC_LDR); - printk(KERN_DEBUG "... APIC LDR: %08x\n", v); - v = apic_read(APIC_DFR); - printk(KERN_DEBUG "... APIC DFR: %08x\n", v); - v = apic_read(APIC_SPIV); - printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); - - printk(KERN_DEBUG "... APIC ISR field:\n"); - print_APIC_bitfield(APIC_ISR); - printk(KERN_DEBUG "... APIC TMR field:\n"); - print_APIC_bitfield(APIC_TMR); - printk(KERN_DEBUG "... APIC IRR field:\n"); - print_APIC_bitfield(APIC_IRR); - - v = apic_read(APIC_ESR); - printk(KERN_DEBUG "... APIC ESR: %08x\n", v); - - v = apic_read(APIC_ICR); - printk(KERN_DEBUG "... APIC ICR: %08x\n", v); - v = apic_read(APIC_ICR2); - printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); - - v = apic_read(APIC_LVTT); - printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); - - if (maxlvt > 3) { /* PC is LVT#4. */ - v = apic_read(APIC_LVTPC); - printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); - } - v = apic_read(APIC_LVT0); - printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); - v = apic_read(APIC_LVT1); - printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); - - if (maxlvt > 2) { /* ERR is LVT#3. */ - v = apic_read(APIC_LVTERR); - printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); - } - - v = apic_read(APIC_TMICT); - printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); - v = apic_read(APIC_TMCCT); - printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); - v = apic_read(APIC_TDCR); - printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); - printk("\n"); -} - -void print_all_local_APICs (void) -{ - on_each_cpu(print_local_APIC, NULL, 1, 1); -} - -void __apicdebuginit print_PIC(void) -{ - unsigned int v; - unsigned long flags; - - if (apic_verbosity == APIC_QUIET) - return; - - printk(KERN_DEBUG "\nprinting PIC contents\n"); - - spin_lock_irqsave(&i8259A_lock, flags); - - v = inb(0xa1) << 8 | inb(0x21); - printk(KERN_DEBUG "... PIC IMR: %04x\n", v); - - v = inb(0xa0) << 8 | inb(0x20); - printk(KERN_DEBUG "... PIC IRR: %04x\n", v); - - outb(0x0b,0xa0); - outb(0x0b,0x20); - v = inb(0xa0) << 8 | inb(0x20); - outb(0x0a,0xa0); - outb(0x0a,0x20); - - spin_unlock_irqrestore(&i8259A_lock, flags); - - printk(KERN_DEBUG "... PIC ISR: %04x\n", v); - - v = inb(0x4d1) << 8 | inb(0x4d0); - printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); -} - -#endif /* 0 */ - -static void __init enable_IO_APIC(void) -{ - union IO_APIC_reg_01 reg_01; - int i8259_apic, i8259_pin; - int i, apic; - unsigned long flags; - - for (i = 0; i < PIN_MAP_SIZE; i++) { - irq_2_pin[i].pin = -1; - irq_2_pin[i].next = 0; - } - - /* - * The number of IO-APIC IRQ registers (== #pins): - */ - for (apic = 0; apic < nr_ioapics; apic++) { - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(apic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - nr_ioapic_registers[apic] = reg_01.bits.entries+1; - } - for(apic = 0; apic < nr_ioapics; apic++) { - int pin; - /* See if any of the pins is in ExtINT mode */ - for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { - struct IO_APIC_route_entry entry; - entry = ioapic_read_entry(apic, pin); - - /* If the interrupt line is enabled and in ExtInt mode - * I have found the pin where the i8259 is connected. - */ - if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { - ioapic_i8259.apic = apic; - ioapic_i8259.pin = pin; - goto found_i8259; - } - } - } - found_i8259: - /* Look to see what if the MP table has reported the ExtINT */ - i8259_pin = find_isa_irq_pin(0, mp_ExtINT); - i8259_apic = find_isa_irq_apic(0, mp_ExtINT); - /* Trust the MP table if nothing is setup in the hardware */ - if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { - printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); - ioapic_i8259.pin = i8259_pin; - ioapic_i8259.apic = i8259_apic; - } - /* Complain if the MP table and the hardware disagree */ - if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && - (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) - { - printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); - } - - /* - * Do not trust the IO-APIC being empty at bootup - */ - clear_IO_APIC(); -} - -/* - * Not an __init, needed by the reboot code - */ -void disable_IO_APIC(void) -{ - /* - * Clear the IO-APIC before rebooting: - */ - clear_IO_APIC(); - - /* - * If the i8259 is routed through an IOAPIC - * Put that IOAPIC in virtual wire mode - * so legacy interrupts can be delivered. - */ - if (ioapic_i8259.pin != -1) { - struct IO_APIC_route_entry entry; - - memset(&entry, 0, sizeof(entry)); - entry.mask = 0; /* Enabled */ - entry.trigger = 0; /* Edge */ - entry.irr = 0; - entry.polarity = 0; /* High */ - entry.delivery_status = 0; - entry.dest_mode = 0; /* Physical */ - entry.delivery_mode = dest_ExtINT; /* ExtInt */ - entry.vector = 0; - entry.dest.physical.physical_dest = - GET_APIC_ID(apic_read(APIC_ID)); - - /* - * Add it to the IO-APIC irq-routing table: - */ - ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); - } - - disconnect_bsp_APIC(ioapic_i8259.pin != -1); -} - -/* - * There is a nasty bug in some older SMP boards, their mptable lies - * about the timer IRQ. We do the following to work around the situation: - * - * - timer IRQ defaults to IO-APIC IRQ - * - if this function detects that timer IRQs are defunct, then we fall - * back to ISA timer IRQs - */ -static int __init timer_irq_works(void) -{ - unsigned long t1 = jiffies; - - local_irq_enable(); - /* Let ten ticks pass... */ - mdelay((10 * 1000) / HZ); - - /* - * Expect a few ticks at least, to be sure some possible - * glue logic does not lock up after one or two first - * ticks in a non-ExtINT mode. Also the local APIC - * might have cached one ExtINT interrupt. Finally, at - * least one tick may be lost due to delays. - */ - - /* jiffies wrap? */ - if (jiffies - t1 > 4) - return 1; - return 0; -} - -/* - * In the SMP+IOAPIC case it might happen that there are an unspecified - * number of pending IRQ events unhandled. These cases are very rare, - * so we 'resend' these IRQs via IPIs, to the same CPU. It's much - * better to do it this way as thus we do not have to be aware of - * 'pending' interrupts in the IRQ path, except at this point. - */ -/* - * Edge triggered needs to resend any interrupt - * that was delayed but this is now handled in the device - * independent code. - */ - -/* - * Starting up a edge-triggered IO-APIC interrupt is - * nasty - we need to make sure that we get the edge. - * If it is already asserted for some reason, we need - * return 1 to indicate that is was pending. - * - * This is not complete - we should be able to fake - * an edge even if it isn't on the 8259A... - */ - -static unsigned int startup_edge_ioapic_irq(unsigned int irq) -{ - int was_pending = 0; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - if (irq < 16) { - disable_8259A_irq(irq); - if (i8259A_irq_pending(irq)) - was_pending = 1; - } - __unmask_IO_APIC_irq(irq); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return was_pending; -} - -/* - * Once we have recorded IRQ_PENDING already, we can mask the - * interrupt for real. This prevents IRQ storms from unhandled - * devices. - */ -static void ack_edge_ioapic_irq(unsigned int irq) -{ - move_irq(irq); - if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) - == (IRQ_PENDING | IRQ_DISABLED)) - mask_IO_APIC_irq(irq); - ack_APIC_irq(); -} - -/* - * Level triggered interrupts can just be masked, - * and shutting down and starting up the interrupt - * is the same as enabling and disabling them -- except - * with a startup need to return a "was pending" value. - * - * Level triggered interrupts are special because we - * do not touch any IO-APIC register while handling - * them. We ack the APIC in the end-IRQ handler, not - * in the start-IRQ-handler. Protection against reentrance - * from the same interrupt is still provided, both by the - * generic IRQ layer and by the fact that an unacked local - * APIC does not accept IRQs. - */ -static unsigned int startup_level_ioapic_irq (unsigned int irq) -{ - unmask_IO_APIC_irq(irq); - - return 0; /* don't check for pending */ -} - -static void end_level_ioapic_irq (unsigned int irq) -{ - move_irq(irq); - ack_APIC_irq(); -} - -#ifdef CONFIG_PCI_MSI -static unsigned int startup_edge_ioapic_vector(unsigned int vector) -{ - int irq = vector_to_irq(vector); - - return startup_edge_ioapic_irq(irq); -} - -static void ack_edge_ioapic_vector(unsigned int vector) -{ - int irq = vector_to_irq(vector); - - move_native_irq(vector); - ack_edge_ioapic_irq(irq); -} - -static unsigned int startup_level_ioapic_vector (unsigned int vector) -{ - int irq = vector_to_irq(vector); - - return startup_level_ioapic_irq (irq); -} - -static void end_level_ioapic_vector (unsigned int vector) -{ - int irq = vector_to_irq(vector); - - move_native_irq(vector); - end_level_ioapic_irq(irq); -} - -static void mask_IO_APIC_vector (unsigned int vector) -{ - int irq = vector_to_irq(vector); - - mask_IO_APIC_irq(irq); -} - -static void unmask_IO_APIC_vector (unsigned int vector) -{ - int irq = vector_to_irq(vector); - - unmask_IO_APIC_irq(irq); -} - -#ifdef CONFIG_SMP -static void set_ioapic_affinity_vector (unsigned int vector, - cpumask_t cpu_mask) -{ - int irq = vector_to_irq(vector); - - set_native_irq_info(vector, cpu_mask); - set_ioapic_affinity_irq(irq, cpu_mask); -} -#endif // CONFIG_SMP -#endif // CONFIG_PCI_MSI - -static int ioapic_retrigger(unsigned int irq) -{ - send_IPI_self(IO_APIC_VECTOR(irq)); - - return 1; -} - -/* - * Level and edge triggered IO-APIC interrupts need different handling, - * so we use two separate IRQ descriptors. Edge triggered IRQs can be - * handled with the level-triggered descriptor, but that one has slightly - * more overhead. Level-triggered interrupts cannot be handled with the - * edge-triggered handler, without risking IRQ storms and other ugly - * races. - */ - -static struct hw_interrupt_type ioapic_edge_type __read_mostly = { - .typename = "IO-APIC-edge", - .startup = startup_edge_ioapic, - .shutdown = shutdown_edge_ioapic, - .enable = enable_edge_ioapic, - .disable = disable_edge_ioapic, - .ack = ack_edge_ioapic, - .end = end_edge_ioapic, -#ifdef CONFIG_SMP - .set_affinity = set_ioapic_affinity, -#endif - .retrigger = ioapic_retrigger, -}; - -static struct hw_interrupt_type ioapic_level_type __read_mostly = { - .typename = "IO-APIC-level", - .startup = startup_level_ioapic, - .shutdown = shutdown_level_ioapic, - .enable = enable_level_ioapic, - .disable = disable_level_ioapic, - .ack = mask_and_ack_level_ioapic, - .end = end_level_ioapic, -#ifdef CONFIG_SMP - .set_affinity = set_ioapic_affinity, -#endif - .retrigger = ioapic_retrigger, -}; - -static inline void init_IO_APIC_traps(void) -{ - int irq; - - /* - * NOTE! The local APIC isn't very good at handling - * multiple interrupts at the same interrupt level. - * As the interrupt level is determined by taking the - * vector number and shifting that right by 4, we - * want to spread these out a bit so that they don't - * all fall in the same interrupt level. - * - * Also, we've got to be careful not to trash gate - * 0x80, because int 0x80 is hm, kind of importantish. ;) - */ - for (irq = 0; irq < NR_IRQS ; irq++) { - int tmp = irq; - if (use_pci_vector()) { - if (!platform_legacy_irq(tmp)) - if ((tmp = vector_to_irq(tmp)) == -1) - continue; - } - if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) { - /* - * Hmm.. We don't have an entry for this, - * so default to an old-fashioned 8259 - * interrupt if we can.. - */ - if (irq < 16) - make_8259A_irq(irq); - else - /* Strange. Oh, well.. */ - irq_desc[irq].chip = &no_irq_type; - } - } -} - -static void enable_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); -} - -static void disable_lapic_irq (unsigned int irq) -{ - unsigned long v; - - v = apic_read(APIC_LVT0); - apic_write(APIC_LVT0, v | APIC_LVT_MASKED); -} - -static void ack_lapic_irq (unsigned int irq) -{ - ack_APIC_irq(); -} - -static void end_lapic_irq (unsigned int i) { /* nothing */ } - -static struct hw_interrupt_type lapic_irq_type __read_mostly = { - .typename = "local-APIC-edge", - .startup = NULL, /* startup_irq() not used for IRQ0 */ - .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ - .enable = enable_lapic_irq, - .disable = disable_lapic_irq, - .ack = ack_lapic_irq, - .end = end_lapic_irq, -}; - -static void setup_nmi (void) -{ - /* - * Dirty trick to enable the NMI watchdog ... - * We put the 8259A master into AEOI mode and - * unmask on all local APICs LVT0 as NMI. - * - * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') - * is from Maciej W. Rozycki - so we do not have to EOI from - * the NMI handler or the timer interrupt. - */ - printk(KERN_INFO "activating NMI Watchdog ..."); - - enable_NMI_through_LVT0(NULL); - - printk(" done.\n"); -} - -/* - * This looks a bit hackish but it's about the only one way of sending - * a few INTA cycles to 8259As and any associated glue logic. ICR does - * not support the ExtINT mode, unfortunately. We need to send these - * cycles as some i82489DX-based boards have glue logic that keeps the - * 8259A interrupt line asserted until INTA. --macro - */ -static inline void unlock_ExtINT_logic(void) -{ - int apic, pin, i; - struct IO_APIC_route_entry entry0, entry1; - unsigned char save_control, save_freq_select; - unsigned long flags; - - pin = find_isa_irq_pin(8, mp_INT); - apic = find_isa_irq_apic(8, mp_INT); - if (pin == -1) - return; - - spin_lock_irqsave(&ioapic_lock, flags); - *(((int *)&entry0) + 1) = io_apic_read(apic, 0x11 + 2 * pin); - *(((int *)&entry0) + 0) = io_apic_read(apic, 0x10 + 2 * pin); - spin_unlock_irqrestore(&ioapic_lock, flags); - clear_IO_APIC_pin(apic, pin); - - memset(&entry1, 0, sizeof(entry1)); - - entry1.dest_mode = 0; /* physical delivery */ - entry1.mask = 0; /* unmask IRQ now */ - entry1.dest.physical.physical_dest = hard_smp_processor_id(); - entry1.delivery_mode = dest_ExtINT; - entry1.polarity = entry0.polarity; - entry1.trigger = 0; - entry1.vector = 0; - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); - - save_control = CMOS_READ(RTC_CONTROL); - save_freq_select = CMOS_READ(RTC_FREQ_SELECT); - CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, - RTC_FREQ_SELECT); - CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); - - i = 100; - while (i-- > 0) { - mdelay(10); - if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) - i -= 10; - } - - CMOS_WRITE(save_control, RTC_CONTROL); - CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); - clear_IO_APIC_pin(apic, pin); - - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); - io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); - spin_unlock_irqrestore(&ioapic_lock, flags); -} - -int timer_uses_ioapic_pin_0; - -/* - * This code may look a bit paranoid, but it's supposed to cooperate with - * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ - * is so screwy. Thanks to Brian Perkins for testing/hacking this beast - * fanatically on his truly buggy board. - * - * FIXME: really need to revamp this for modern platforms only. - */ -static inline void check_timer(void) -{ - int apic1, pin1, apic2, pin2; - int vector; - - /* - * get/set the timer IRQ vector: - */ - disable_8259A_irq(0); - vector = assign_irq_vector(0); - set_intr_gate(vector, interrupt[0]); - - /* - * Subtle, code in do_timer_interrupt() expects an AEOI - * mode for the 8259A whenever interrupts are routed - * through I/O APICs. Also IRQ0 has to be enabled in - * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. - */ - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); - init_8259A(1); - if (timer_over_8254 > 0) - enable_8259A_irq(0); - - pin1 = find_isa_irq_pin(0, mp_INT); - apic1 = find_isa_irq_apic(0, mp_INT); - pin2 = ioapic_i8259.pin; - apic2 = ioapic_i8259.apic; - - if (pin1 == 0) - timer_uses_ioapic_pin_0 = 1; - - apic_printk(APIC_VERBOSE,KERN_INFO "..TIMER: vector=0x%02X apic1=%d pin1=%d apic2=%d pin2=%d\n", - vector, apic1, pin1, apic2, pin2); - - if (pin1 != -1) { - /* - * Ok, does IRQ0 through the IOAPIC work? - */ - unmask_IO_APIC_irq(0); - if (!no_timer_check && timer_irq_works()) { - nmi_watchdog_default(); - if (nmi_watchdog == NMI_IO_APIC) { - disable_8259A_irq(0); - setup_nmi(); - enable_8259A_irq(0); - } - if (disable_timer_pin_1 > 0) - clear_IO_APIC_pin(0, pin1); - return; - } - clear_IO_APIC_pin(apic1, pin1); - apic_printk(APIC_QUIET,KERN_ERR "..MP-BIOS bug: 8254 timer not " - "connected to IO-APIC\n"); - } - - apic_printk(APIC_VERBOSE,KERN_INFO "...trying to set up timer (IRQ0) " - "through the 8259A ... "); - if (pin2 != -1) { - apic_printk(APIC_VERBOSE,"\n..... (found apic %d pin %d) ...", - apic2, pin2); - /* - * legacy devices should be connected to IO APIC #0 - */ - setup_ExtINT_IRQ0_pin(apic2, pin2, vector); - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - nmi_watchdog_default(); - if (nmi_watchdog == NMI_IO_APIC) { - setup_nmi(); - } - return; - } - /* - * Cleanup, just in case ... - */ - clear_IO_APIC_pin(apic2, pin2); - } - apic_printk(APIC_VERBOSE," failed.\n"); - - if (nmi_watchdog == NMI_IO_APIC) { - printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); - nmi_watchdog = 0; - } - - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); - - disable_8259A_irq(0); - irq_desc[0].chip = &lapic_irq_type; - apic_write(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ - enable_8259A_irq(0); - - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - return; - } - apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); - apic_printk(APIC_VERBOSE," failed.\n"); - - apic_printk(APIC_VERBOSE, KERN_INFO "...trying to set up timer as ExtINT IRQ..."); - - init_8259A(0); - make_8259A_irq(0); - apic_write(APIC_LVT0, APIC_DM_EXTINT); - - unlock_ExtINT_logic(); - - if (timer_irq_works()) { - apic_printk(APIC_VERBOSE," works.\n"); - return; - } - apic_printk(APIC_VERBOSE," failed :(.\n"); - panic("IO-APIC + timer doesn't work! Try using the 'noapic' kernel parameter\n"); -} - -static int __init notimercheck(char *s) -{ - no_timer_check = 1; - return 1; -} -__setup("no_timer_check", notimercheck); - -/* - * - * IRQ's that are handled by the PIC in the MPS IOAPIC case. - * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. - * Linux doesn't really care, as it's not actually used - * for any interrupt handling anyway. - */ -#define PIC_IRQS (1<<2) - -void __init setup_IO_APIC(void) -{ - enable_IO_APIC(); - - if (acpi_ioapic) - io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ - else - io_apic_irqs = ~PIC_IRQS; - - apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - - sync_Arb_IDs(); - setup_IO_APIC_irqs(); - init_IO_APIC_traps(); - check_timer(); - if (!acpi_ioapic) - print_IO_APIC(); -} - -struct sysfs_ioapic_data { - struct sys_device dev; - struct IO_APIC_route_entry entry[0]; -}; -static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; - -static int ioapic_suspend(struct sys_device *dev, pm_message_t state) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) - *entry = ioapic_read_entry(dev->id, i); - - return 0; -} - -static int ioapic_resume(struct sys_device *dev) -{ - struct IO_APIC_route_entry *entry; - struct sysfs_ioapic_data *data; - unsigned long flags; - union IO_APIC_reg_00 reg_00; - int i; - - data = container_of(dev, struct sysfs_ioapic_data, dev); - entry = data->entry; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; - io_apic_write(dev->id, 0, reg_00.raw); - } - spin_unlock_irqrestore(&ioapic_lock, flags); - for (i = 0; i < nr_ioapic_registers[dev->id]; i++) - ioapic_write_entry(dev->id, i, entry[i]); - - return 0; -} - -static struct sysdev_class ioapic_sysdev_class = { - set_kset_name("ioapic"), - .suspend = ioapic_suspend, - .resume = ioapic_resume, -}; - -static int __init ioapic_init_sysfs(void) -{ - struct sys_device * dev; - int i, size, error = 0; - - error = sysdev_class_register(&ioapic_sysdev_class); - if (error) - return error; - - for (i = 0; i < nr_ioapics; i++ ) { - size = sizeof(struct sys_device) + nr_ioapic_registers[i] - * sizeof(struct IO_APIC_route_entry); - mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); - if (!mp_ioapic_data[i]) { - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - memset(mp_ioapic_data[i], 0, size); - dev = &mp_ioapic_data[i]->dev; - dev->id = i; - dev->cls = &ioapic_sysdev_class; - error = sysdev_register(dev); - if (error) { - kfree(mp_ioapic_data[i]); - mp_ioapic_data[i] = NULL; - printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); - continue; - } - } - - return 0; -} - -device_initcall(ioapic_init_sysfs); - -/* -------------------------------------------------------------------------- - ACPI-based IOAPIC Configuration - -------------------------------------------------------------------------- */ - -#ifdef CONFIG_ACPI - -#define IO_APIC_MAX_ID 0xFE - -int __init io_apic_get_redir_entries (int ioapic) -{ - union IO_APIC_reg_01 reg_01; - unsigned long flags; - - spin_lock_irqsave(&ioapic_lock, flags); - reg_01.raw = io_apic_read(ioapic, 1); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return reg_01.bits.entries; -} - - -int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity) -{ - struct IO_APIC_route_entry entry; - unsigned long flags; - - if (!IO_APIC_IRQ(irq)) { - apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", - ioapic); - return -EINVAL; - } - - /* - * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. - * Note that we mask (disable) IRQs now -- these get enabled when the - * corresponding device driver registers for this IRQ. - */ - - memset(&entry,0,sizeof(entry)); - - entry.delivery_mode = INT_DELIVERY_MODE; - entry.dest_mode = INT_DEST_MODE; - entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); - entry.trigger = triggering; - entry.polarity = polarity; - entry.mask = 1; /* Disabled (masked) */ - - irq = gsi_irq_sharing(irq); - /* - * IRQs < 16 are already in the irq_2_pin[] map - */ - if (irq >= 16) - add_pin_to_irq(irq, ioapic, pin); - - entry.vector = assign_irq_vector(irq); - - apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry (%d-%d -> 0x%x -> " - "IRQ %d Mode:%i Active:%i)\n", ioapic, - mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, - triggering, polarity); - - ioapic_register_intr(irq, entry.vector, triggering); - - if (!ioapic && (irq < 16)) - disable_8259A_irq(irq); - - ioapic_write_entry(ioapic, pin, entry); - - spin_lock_irqsave(&ioapic_lock, flags); - set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); - spin_unlock_irqrestore(&ioapic_lock, flags); - - return 0; -} - -#endif /* CONFIG_ACPI */ - - -/* - * This function currently is only a helper for the i386 smp boot process where - * we need to reprogram the ioredtbls to cater for the cpus which have come online - * so mask in all cases should simply be TARGET_CPUS - */ -#ifdef CONFIG_SMP -void __init setup_ioapic_dest(void) -{ - int pin, ioapic, irq, irq_entry; - - if (skip_ioapic_setup == 1) - return; - - for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { - for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { - irq_entry = find_irq_entry(ioapic, pin, mp_INT); - if (irq_entry == -1) - continue; - irq = pin_2_irq(irq_entry, ioapic, pin); - set_ioapic_affinity_irq(irq, TARGET_CPUS); - } - - } -} -#endif |