diff options
Diffstat (limited to 'arch/x86_64/boot')
| -rw-r--r-- | arch/x86_64/boot/Makefile | 2 | ||||
| -rw-r--r-- | arch/x86_64/boot/compressed/Makefile | 12 | ||||
| -rw-r--r-- | arch/x86_64/boot/compressed/head.S | 339 | ||||
| -rw-r--r-- | arch/x86_64/boot/compressed/misc.c | 247 | ||||
| -rw-r--r-- | arch/x86_64/boot/compressed/vmlinux.lds | 44 | ||||
| -rw-r--r-- | arch/x86_64/boot/compressed/vmlinux.scr | 9 | ||||
| -rw-r--r-- | arch/x86_64/boot/setup.S | 85 | ||||
| -rw-r--r-- | arch/x86_64/boot/video.S | 2043 |
8 files changed, 459 insertions, 2322 deletions
diff --git a/arch/x86_64/boot/Makefile b/arch/x86_64/boot/Makefile index deb063e7762..ee6f6505f95 100644 --- a/arch/x86_64/boot/Makefile +++ b/arch/x86_64/boot/Makefile @@ -36,7 +36,7 @@ subdir- := compressed/ #Let make clean descend in compressed/ # --------------------------------------------------------------------------- $(obj)/bzImage: IMAGE_OFFSET := 0x100000 -$(obj)/bzImage: EXTRA_AFLAGS := -traditional $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ +$(obj)/bzImage: EXTRA_AFLAGS := $(SVGA_MODE) $(RAMDISK) -D__BIG_KERNEL__ $(obj)/bzImage: BUILDFLAGS := -b quiet_cmd_image = BUILD $@ diff --git a/arch/x86_64/boot/compressed/Makefile b/arch/x86_64/boot/compressed/Makefile index e70fa6e1da0..705a3e33d7e 100644 --- a/arch/x86_64/boot/compressed/Makefile +++ b/arch/x86_64/boot/compressed/Makefile @@ -8,16 +8,14 @@ targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o piggy.o EXTRA_AFLAGS := -traditional -AFLAGS := $(subst -m64,-m32,$(AFLAGS)) # cannot use EXTRA_CFLAGS because base CFLAGS contains -mkernel which conflicts with # -m32 -CFLAGS := -m32 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -LDFLAGS := -m elf_i386 +CFLAGS := -m64 -D__KERNEL__ -Iinclude -O2 -fno-strict-aliasing -fPIC -mcmodel=small -fno-builtin +LDFLAGS := -m elf_x86_64 -LDFLAGS_vmlinux := -Ttext $(IMAGE_OFFSET) -e startup_32 -m elf_i386 - -$(obj)/vmlinux: $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE +LDFLAGS_vmlinux := -T +$(obj)/vmlinux: $(src)/vmlinux.lds $(obj)/head.o $(obj)/misc.o $(obj)/piggy.o FORCE $(call if_changed,ld) @: @@ -27,7 +25,7 @@ $(obj)/vmlinux.bin: vmlinux FORCE $(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE $(call if_changed,gzip) -LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T +LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.gz FORCE $(call if_changed,ld) diff --git a/arch/x86_64/boot/compressed/head.S b/arch/x86_64/boot/compressed/head.S index 6f55565e4d4..f9d5692a010 100644 --- a/arch/x86_64/boot/compressed/head.S +++ b/arch/x86_64/boot/compressed/head.S @@ -26,116 +26,279 @@ #include <linux/linkage.h> #include <asm/segment.h> +#include <asm/pgtable.h> #include <asm/page.h> +#include <asm/msr.h> +.section ".text.head" .code32 .globl startup_32 - + startup_32: cld cli - movl $(__KERNEL_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - - lss stack_start,%esp - xorl %eax,%eax -1: incl %eax # check that A20 really IS enabled - movl %eax,0x000000 # loop forever if it isn't - cmpl %eax,0x100000 - je 1b + movl $(__KERNEL_DS), %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + +/* Calculate the delta between where we were compiled to run + * at and where we were actually loaded at. This can only be done + * with a short local call on x86. Nothing else will tell us what + * address we are running at. The reserved chunk of the real-mode + * data at 0x34-0x3f are used as the stack for this calculation. + * Only 4 bytes are needed. + */ + leal 0x40(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp + +/* setup a stack and make sure cpu supports long mode. */ + movl $user_stack_end, %eax + addl %ebp, %eax + movl %eax, %esp + + call verify_cpu + testl %eax, %eax + jnz no_longmode + +/* Compute the delta between where we were compiled to run at + * and where the code will actually run at. + */ +/* %ebp contains the address we are loaded at by the boot loader and %ebx + * contains the address where we should move the kernel image temporarily + * for safe in-place decompression. + */ + +#ifdef CONFIG_RELOCATABLE + movl %ebp, %ebx + addl $(LARGE_PAGE_SIZE -1), %ebx + andl $LARGE_PAGE_MASK, %ebx +#else + movl $CONFIG_PHYSICAL_START, %ebx +#endif + + /* Replace the compressed data size with the uncompressed size */ + subl input_len(%ebp), %ebx + movl output_len(%ebp), %eax + addl %eax, %ebx + /* Add 8 bytes for every 32K input block */ + shrl $12, %eax + addl %eax, %ebx + /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ + addl $(32768 + 18 + 4095), %ebx + andl $~4095, %ebx /* - * Initialize eflags. Some BIOS's leave bits like NT set. This would - * confuse the debugger if this code is traced. - * XXX - best to initialize before switching to protected mode. + * Prepare for entering 64 bit mode */ - pushl $0 - popfl + + /* Load new GDT with the 64bit segments using 32bit descriptor */ + leal gdt(%ebp), %eax + movl %eax, gdt+2(%ebp) + lgdt gdt(%ebp) + + /* Enable PAE mode */ + xorl %eax, %eax + orl $(1 << 5), %eax + movl %eax, %cr4 + + /* + * Build early 4G boot pagetable + */ + /* Initialize Page tables to 0*/ + leal pgtable(%ebx), %edi + xorl %eax, %eax + movl $((4096*6)/4), %ecx + rep stosl + + /* Build Level 4 */ + leal pgtable + 0(%ebx), %edi + leal 0x1007 (%edi), %eax + movl %eax, 0(%edi) + + /* Build Level 3 */ + leal pgtable + 0x1000(%ebx), %edi + leal 0x1007(%edi), %eax + movl $4, %ecx +1: movl %eax, 0x00(%edi) + addl $0x00001000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Build Level 2 */ + leal pgtable + 0x2000(%ebx), %edi + movl $0x00000183, %eax + movl $2048, %ecx +1: movl %eax, 0(%edi) + addl $0x00200000, %eax + addl $8, %edi + decl %ecx + jnz 1b + + /* Enable the boot page tables */ + leal pgtable(%ebx), %eax + movl %eax, %cr3 + + /* Enable Long mode in EFER (Extended Feature Enable Register) */ + movl $MSR_EFER, %ecx + rdmsr + btsl $_EFER_LME, %eax + wrmsr + + /* Setup for the jump to 64bit mode + * + * When the jump is performend we will be in long mode but + * in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1 + * (and in turn EFER.LMA = 1). To jump into 64bit mode we use + * the new gdt/idt that has __KERNEL_CS with CS.L = 1. + * We place all of the values on our mini stack so lret can + * used to perform that far jump. + */ + pushl $__KERNEL_CS + leal startup_64(%ebp), %eax + pushl %eax + + /* Enter paged protected Mode, activating Long Mode */ + movl $0x80000001, %eax /* Enable Paging and Protected mode */ + movl %eax, %cr0 + + /* Jump from 32bit compatibility mode into 64bit mode. */ + lret + +no_longmode: + /* This isn't an x86-64 CPU so hang */ +1: + hlt + jmp 1b + +#include "../../kernel/verify_cpu.S" + + /* Be careful here startup_64 needs to be at a predictable + * address so I can export it in an ELF header. Bootloaders + * should look at the ELF header to find this address, as + * it may change in the future. + */ + .code64 + .org 0x200 +ENTRY(startup_64) + /* We come here either from startup_32 or directly from a + * 64bit bootloader. If we come here from a bootloader we depend on + * an identity mapped page table being provied that maps our + * entire text+data+bss and hopefully all of memory. + */ + + /* Setup data segments. */ + xorl %eax, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %ss + + /* Compute the decompressed kernel start address. It is where + * we were loaded at aligned to a 2M boundary. %rbp contains the + * decompressed kernel start address. + * + * If it is a relocatable kernel then decompress and run the kernel + * from load address aligned to 2MB addr, otherwise decompress and + * run the kernel from CONFIG_PHYSICAL_START + */ + + /* Start with the delta to where the kernel will run at. */ +#ifdef CONFIG_RELOCATABLE + leaq startup_32(%rip) /* - $startup_32 */, %rbp + addq $(LARGE_PAGE_SIZE - 1), %rbp + andq $LARGE_PAGE_MASK, %rbp + movq %rbp, %rbx +#else + movq $CONFIG_PHYSICAL_START, %rbp + movq %rbp, %rbx +#endif + + /* Replace the compressed data size with the uncompressed size */ + movl input_len(%rip), %eax + subq %rax, %rbx + movl output_len(%rip), %eax + addq %rax, %rbx + /* Add 8 bytes for every 32K input block */ + shrq $12, %rax + addq %rax, %rbx + /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */ + addq $(32768 + 18 + 4095), %rbx + andq $~4095, %rbx + +/* Copy the compressed kernel to the end of our buffer + * where decompression in place becomes safe. + */ + leaq _end(%rip), %r8 + leaq _end(%rbx), %r9 + movq $_end /* - $startup_32 */, %rcx +1: subq $8, %r8 + subq $8, %r9 + movq 0(%r8), %rax + movq %rax, 0(%r9) + subq $8, %rcx + jnz 1b + +/* + * Jump to the relocated address. + */ + leaq relocated(%rbx), %rax + jmp *%rax + +.section ".text" +relocated: + /* * Clear BSS */ - xorl %eax,%eax - movl $_edata,%edi - movl $_end,%ecx - subl %edi,%ecx + xorq %rax, %rax + leaq _edata(%rbx), %rdi + leaq _end(%rbx), %rcx + subq %rdi, %rcx cld rep stosb + + /* Setup the stack */ + leaq user_stack_end(%rip), %rsp + + /* zero EFLAGS after setting rsp */ + pushq $0 + popfq + /* * Do the decompression, and jump to the new kernel.. */ - subl $16,%esp # place for structure on the stack - movl %esp,%eax - pushl %esi # real mode pointer as second arg - pushl %eax # address of structure as first arg - call decompress_kernel - orl %eax,%eax - jnz 3f - addl $8,%esp - xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START + pushq %rsi # Save the real mode argument + movq %rsi, %rdi # real mode address + leaq _heap(%rip), %rsi # _heap + leaq input_data(%rip), %rdx # input_data + movl input_len(%rip), %eax + movq %rax, %rcx # input_len + movq %rbp, %r8 # output + call decompress_kernel + popq %rsi -/* - * We come here, if we were loaded high. - * We need to move the move-in-place routine down to 0x1000 - * and then start it with the buffer addresses in registers, - * which we got from the stack. - */ -3: - movl %esi,%ebx - movl $move_routine_start,%esi - movl $0x1000,%edi - movl $move_routine_end,%ecx - subl %esi,%ecx - addl $3,%ecx - shrl $2,%ecx - cld - rep - movsl - - popl %esi # discard the address - addl $4,%esp # real mode pointer - popl %esi # low_buffer_start - popl %ecx # lcount - popl %edx # high_buffer_start - popl %eax # hcount - movl $__PHYSICAL_START,%edi - cli # make sure we don't get interrupted - ljmp $(__KERNEL_CS), $0x1000 # and jump to the move routine /* - * Routine (template) for moving the decompressed kernel in place, - * if we were high loaded. This _must_ PIC-code ! + * Jump to the decompressed kernel. */ -move_routine_start: - movl %ecx,%ebp - shrl $2,%ecx - rep - movsl - movl %ebp,%ecx - andl $3,%ecx - rep - movsb - movl %edx,%esi - movl %eax,%ecx # NOTE: rep movsb won't move if %ecx == 0 - addl $3,%ecx - shrl $2,%ecx - rep - movsl - movl %ebx,%esi # Restore setup pointer - xorl %ebx,%ebx - ljmp $(__KERNEL_CS), $__PHYSICAL_START -move_routine_end: + jmp *%rbp - -/* Stack for uncompression */ - .align 32 -user_stack: + .data +gdt: + .word gdt_end - gdt + .long gdt + .word 0 + .quad 0x0000000000000000 /* NULL descriptor */ + .quad 0x00af9a000000ffff /* __KERNEL_CS */ + .quad 0x00cf92000000ffff /* __KERNEL_DS */ +gdt_end: + .bss +/* Stack for uncompression */ + .balign 4 +user_stack: .fill 4096,4,0 -stack_start: - .long user_stack+4096 - .word __KERNEL_DS - +user_stack_end: diff --git a/arch/x86_64/boot/compressed/misc.c b/arch/x86_64/boot/compressed/misc.c index 3755b2e394d..f932b0e8909 100644 --- a/arch/x86_64/boot/compressed/misc.c +++ b/arch/x86_64/boot/compressed/misc.c @@ -9,10 +9,95 @@ * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ +#define _LINUX_STRING_H_ 1 +#define __LINUX_BITMAP_H 1 + +#include <linux/linkage.h> #include <linux/screen_info.h> #include <asm/io.h> #include <asm/page.h> +/* WARNING!! + * This code is compiled with -fPIC and it is relocated dynamically + * at run time, but no relocation processing is performed. + * This means that it is not safe to place pointers in static structures. + */ + +/* + * Getting to provable safe in place decompression is hard. + * Worst case behaviours need to be analized. + * Background information: + * + * The file layout is: + * magic[2] + * method[1] + * flags[1] + * timestamp[4] + * extraflags[1] + * os[1] + * compressed data blocks[N] + * crc[4] orig_len[4] + * + * resulting in 18 bytes of non compressed data overhead. + * + * Files divided into blocks + * 1 bit (last block flag) + * 2 bits (block type) + * + * 1 block occurs every 32K -1 bytes or when there 50% compression has been achieved. + * The smallest block type encoding is always used. + * + * stored: + * 32 bits length in bytes. + * + * fixed: + * magic fixed tree. + * symbols. + * + * dynamic: + * dynamic tree encoding. + * symbols. + * + * + * The buffer for decompression in place is the length of the + * uncompressed data, plus a small amount extra to keep the algorithm safe. + * The compressed data is placed at the end of the buffer. The output + * pointer is placed at the start of the buffer and the input pointer + * is placed where the compressed data starts. Problems will occur + * when the output pointer overruns the input pointer. + * + * The output pointer can only overrun the input pointer if the input + * pointer is moving faster than the output pointer. A condition only + * triggered by data whose compressed form is larger than the uncompressed + * form. + * + * The worst case at the block level is a growth of the compressed data + * of 5 bytes per 32767 bytes. + * + * The worst case internal to a compressed block is very hard to figure. + * The worst case can at least be boundined by having one bit that represents + * 32764 bytes and then all of the rest of the bytes representing the very + * very last byte. + * + * All of which is enough to compute an amount of extra data that is required + * to be safe. To avoid problems at the block level allocating 5 extra bytes + * per 32767 bytes of data is sufficient. To avoind problems internal to a block + * adding an extra 32767 bytes (the worst case uncompressed block size) is + * sufficient, to ensure that in the worst case the decompressed data for + * block will stop the byte before the compressed data for a block begins. + * To avoid problems with the compressed data's meta information an extra 18 + * bytes are needed. Leading to the formula: + * + * extra_bytes = (uncompressed_size >> 12) + 32768 + 18 + decompressor_size. + * + * Adding 8 bytes per 32K is a bit excessive but much easier to calculate. + * Adding 32768 instead of 32767 just makes for round numbers. + * Adding the decompressor_size is necessary as it musht live after all + * of the data as well. Last I measured the decompressor is about 14K. + * 10K of actuall data and 4K of bss. + * + */ + /* * gzip declarations */ @@ -28,15 +113,20 @@ typedef unsigned char uch; typedef unsigned short ush; typedef unsigned long ulg; -#define WSIZE 0x8000 /* Window size must be at least 32k, */ - /* and a power of two */ +#define WSIZE 0x80000000 /* Window size must be at least 32k, + * and a power of two + * We don't actually have a window just + * a huge output buffer so I report + * a 2G windows size, as that should + * always be larger than our output buffer. + */ -static uch *inbuf; /* input buffer */ -static uch window[WSIZE]; /* Sliding window buffer */ +static uch *inbuf; /* input buffer */ +static uch *window; /* Sliding window buffer, (and final output buffer) */ -static unsigned insize = 0; /* valid bytes in inbuf */ -static unsigned inptr = 0; /* index of next byte to be processed in inbuf */ -static unsigned outcnt = 0; /* bytes in output buffer */ +static unsigned insize; /* valid bytes in inbuf */ +static unsigned inptr; /* index of next byte to be processed in inbuf */ +static unsigned outcnt; /* bytes in output buffer */ /* gzip flag byte */ #define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ @@ -87,8 +177,6 @@ extern unsigned char input_data[]; extern int input_len; static long bytes_out = 0; -static uch *output_data; -static unsigned long output_ptr = 0; static void *malloc(int size); static void free(void *where); @@ -98,17 +186,10 @@ static void *memcpy(void *dest, const void *src, unsigned n); static void putstr(const char *); -extern int end; -static long free_mem_ptr = (long)&end; +static long free_mem_ptr; static long free_mem_end_ptr; -#define INPLACE_MOVE_ROUTINE 0x1000 -#define LOW_BUFFER_START 0x2000 -#define LOW_BUFFER_MAX 0x90000 -#define HEAP_SIZE 0x3000 -static unsigned int low_buffer_end, low_buffer_size; -static int high_loaded =0; -static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; +#define HEAP_SIZE 0x7000 static char *vidmem = (char *)0xb8000; static int vidport; @@ -218,58 +299,31 @@ static void* memcpy(void* dest, const void* src, unsigned n) */ static int fill_inbuf(void) { - if (insize != 0) { - error("ran out of input data"); - } - - inbuf = input_data; - insize = input_len; - inptr = 1; - return inbuf[0]; + error("ran out of input data"); + return 0; } /* =========================================================================== * Write the output window window[0..outcnt-1] and update crc and bytes_out. * (Used for the decompressed data only.) */ -static void flush_window_low(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, *out, ch; - - in = window; - out = &output_data[output_ptr]; - for (n = 0; n < outcnt; n++) { - ch = *out++ = *in++; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - output_ptr += (ulg)outcnt; - outcnt = 0; -} - -static void flush_window_high(void) -{ - ulg c = crc; /* temporary variable */ - unsigned n; - uch *in, ch; - in = window; - for (n = 0; n < outcnt; n++) { - ch = *output_data++ = *in++; - if ((ulg)output_data == low_buffer_end) output_data=high_buffer_start; - c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); - } - crc = c; - bytes_out += (ulg)outcnt; - outcnt = 0; -} - static void flush_window(void) { - if (high_loaded) flush_window_high(); - else flush_window_low(); + /* With my window equal to my output buffer + * I only need to compute the crc here. + */ + ulg c = crc; /* temporary variable */ + unsigned n; + uch *in, ch; + + in = window; + for (n = 0; n < outcnt; n++) { + ch = *in++; + c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); + } + crc = c; + bytes_out += (ulg)outcnt; + outcnt = 0; } static void error(char *x) @@ -281,57 +335,8 @@ static void error(char *x) while(1); /* Halt */ } -static void setup_normal_output_buffer(void) -{ -#ifdef STANDARD_MEMORY_BIOS_CALL - if (RM_EXT_MEM_K < 1024) error("Less than 2MB of memory"); -#else - if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < 1024) error("Less than 2MB of memory"); -#endif - output_data = (unsigned char *)__PHYSICAL_START; /* Normally Points to 1M */ - free_mem_end_ptr = (long)real_mode; -} - -struct moveparams { - uch *low_buffer_start; int lcount; - uch *high_buffer_start; int hcount; -}; - -static void setup_output_buffer_if_we_run_high(struct moveparams *mv) -{ - high_buffer_start = (uch *)(((ulg)&end) + HEAP_SIZE); -#ifdef STANDARD_MEMORY_BIOS_CALL - if (RM_EXT_MEM_K < (3*1024)) error("Less than 4MB of memory"); -#else - if ((RM_ALT_MEM_K > RM_EXT_MEM_K ? RM_ALT_MEM_K : RM_EXT_MEM_K) < (3*1024)) error("Less than 4MB of memory"); -#endif - mv->low_buffer_start = output_data = (unsigned char *)LOW_BUFFER_START; - low_buffer_end = ((unsigned int)real_mode > LOW_BUFFER_MAX - ? LOW_BUFFER_MAX : (unsigned int)real_mode) & ~0xfff; - low_buffer_size = low_buffer_end - LOW_BUFFER_START; - high_loaded = 1; - free_mem_end_ptr = (long)high_buffer_start; - if ( (__PHYSICAL_START + low_buffer_size) > ((ulg)high_buffer_start)) { - high_buffer_start = (uch *)(__PHYSICAL_START + low_buffer_size); - mv->hcount = 0; /* say: we need not to move high_buffer */ - } - else mv->hcount = -1; - mv->high_buffer_start = high_buffer_start; -} - -static void close_output_buffer_if_we_run_high(struct moveparams *mv) -{ - if (bytes_out > low_buffer_size) { - mv->lcount = low_buffer_size; - if (mv->hcount) - mv->hcount = bytes_out - low_buffer_size; - } else { - mv->lcount = bytes_out; - mv->hcount = 0; - } -} - -int decompress_kernel(struct moveparams *mv, void *rmode) +asmlinkage void decompress_kernel(void *rmode, unsigned long heap, + uch *input_data, unsigned long input_len, uch *output) { real_mode = rmode; @@ -346,13 +351,21 @@ int decompress_kernel(struct moveparams *mv, void *rmode) lines = RM_SCREEN_INFO.orig_video_lines; cols = RM_SCREEN_INFO.orig_video_cols; - if (free_mem_ptr < 0x100000) setup_normal_output_buffer(); - else setup_output_buffer_if_we_run_high(mv); + window = output; /* Output buffer (Normally at 1M) */ + free_mem_ptr = heap; /* Heap */ + free_mem_end_ptr = heap + HEAP_SIZE; + inbuf = input_data; /* Input buffer */ + insize = input_len; + inptr = 0; + + if ((ulg)output & (__KERNEL_ALIGN - 1)) + error("Destination address not 2M aligned"); + if ((ulg)output >= 0xffffffffffUL) + error("Destination address too large"); makecrc(); putstr(".\nDecompressing Linux..."); gunzip(); putstr("done.\nBooting the kernel.\n"); - if (high_loaded) close_output_buffer_if_we_run_high(mv); - return high_loaded; + return; } diff --git a/arch/x86_64/boot/compressed/vmlinux.lds b/arch/x86_64/boot/compressed/vmlinux.lds new file mode 100644 index 00000000000..94c13e557fb --- /dev/null +++ b/arch/x86_64/boot/compressed/vmlinux.lds @@ -0,0 +1,44 @@ +OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") +OUTPUT_ARCH(i386:x86-64) +ENTRY(startup_64) +SECTIONS +{ + /* Be careful parts of head.S assume startup_32 is at + * address 0. + */ + . = 0; + .text : { + _head = . ; + *(.text.head) + _ehead = . ; + *(.text.compressed) + _text = .; /* Text */ + *(.text) + *(.text.*) + _etext = . ; + } + .rodata : { + _rodata = . ; + *(.rodata) /* read-only data */ + *(.rodata.*) + _erodata = . ; + } + .data : { + _data = . ; + *(.data) + *(.data.*) + _edata = . ; + } + .bss : { + _bss = . ; + *(.bss) + *(.bss.*) + *(COMMON) + . = ALIGN(8); + _end = . ; + . = ALIGN(4096); + pgtable = . ; + . = . + 4096 * 6; + _heap = .; + } +} diff --git a/arch/x86_64/boot/compressed/vmlinux.scr b/arch/x86_64/boot/compressed/vmlinux.scr index 1ed9d791f86..bd1429ce193 100644 --- a/arch/x86_64/boot/compressed/vmlinux.scr +++ b/arch/x86_64/boot/compressed/vmlinux.scr @@ -1,9 +1,10 @@ SECTIONS { - .data : { + .text.compressed : { input_len = .; - LONG(input_data_end - input_data) input_data = .; - *(.data) - input_data_end = .; + LONG(input_data_end - input_data) input_data = .; + *(.data) + output_len = . - 4; + input_data_end = .; } } diff --git a/arch/x86_64/boot/setup.S b/arch/x86_64/boot/setup.S index 770940cc010..e9e33f94969 100644 --- a/arch/x86_64/boot/setup.S +++ b/arch/x86_64/boot/setup.S @@ -51,6 +51,7 @@ #include <asm/boot.h> #include <asm/e820.h> #include <asm/page.h> +#include <asm/setup.h> /* Signature words to ensure LILO loaded us right */ #define SIG1 0xAA55 @@ -80,7 +81,7 @@ start: # This is the setup header, and it must start at %cs:2 (old 0x9020:2) .ascii "HdrS" # header signature - .word 0x0204 # header version number (>= 0x0105) + .word 0x0206 # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) realmode_swtch: .word 0, 0 # default_switch, SETUPSEG start_sys_seg: .word SYSSEG @@ -155,7 +156,20 @@ cmd_line_ptr: .long 0 # (Header version 0x0202 or later) # low memory 0x10000 or higher. ramdisk_max: .long 0xffffffff - +kernel_alignment: .long 0x200000 # physical addr alignment required for + # protected mode relocatable kernel +#ifdef CONFIG_RELOCATABLE +relocatable_kernel: .byte 1 +#else +relocatable_kernel: .byte 0 +#endif +pad2: .byte 0 +pad3: .word 0 + +cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, + #added with boot protocol + #version 2.06 + trampoline: call start_of_setup .align 16 # The offset at this point is 0x240 @@ -290,64 +304,10 @@ loader_ok: movw %cs,%ax movw %ax,%ds - /* minimum CPUID flags for x86-64 */ - /* see http://www.x86-64.org/lists/discuss/msg02971.html */ -#define SSE_MASK ((1<<25)|(1<<26)) -#define REQUIRED_MASK1 ((1<<0)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<8)|\ - (1<<13)|(1<<15)|(1<<24)) -#define REQUIRED_MASK2 (1<<29) - - pushfl /* standard way to check for cpuid */ - popl %eax - movl %eax,%ebx - xorl $0x200000,%eax - pushl %eax - popfl - pushfl - popl %eax - cmpl %eax,%ebx - jz no_longmode /* cpu has no cpuid */ - movl $0x0,%eax - cpuid - cmpl $0x1,%eax - jb no_longmode /* no cpuid 1 */ - xor %di,%di - cmpl $0x68747541,%ebx /* AuthenticAMD */ - jnz noamd - cmpl $0x69746e65,%edx - jnz noamd - cmpl $0x444d4163,%ecx - jnz noamd - mov $1,%di /* cpu is from AMD */ -noamd: - movl $0x1,%eax - cpuid - andl $REQUIRED_MASK1,%edx - xorl $REQUIRED_MASK1,%edx - jnz no_longmode - movl $0x80000000,%eax - cpuid - cmpl $0x80000001,%eax - jb no_longmode /* no extended cpuid */ - movl $0x80000001,%eax - cpuid - andl $REQUIRED_MASK2,%edx - xorl $REQUIRED_MASK2,%edx - jnz no_longmode -sse_test: - movl $1,%eax - cpuid - andl $SSE_MASK,%edx - cmpl $SSE_MASK,%edx - je sse_ok - test %di,%di - jz no_longmode /* only try to force SSE on AMD */ - movl $0xc0010015,%ecx /* HWCR */ - rdmsr - btr $15,%eax /* enable SSE */ - wrmsr - xor %di,%di /* don't loop */ - jmp sse_test /* try again */ + call verify_cpu + testl %eax,%eax + jz sse_ok + no_longmode: call beep lea long_mode_panic,%si @@ -357,7 +317,8 @@ no_longmode_loop: long_mode_panic: .string "Your CPU does not support long mode. Use a 32bit distribution." .byte 0 - + +#include "../kernel/verify_cpu.S" sse_ok: popw %ds @@ -846,7 +807,7 @@ gdt_48: # Include video setup & detection code -#include "video.S" +#include "../../i386/boot/video.S" # Setup signature -- must be last setup_sig1: .word SIG1 diff --git a/arch/x86_64/boot/video.S b/arch/x86_64/boot/video.S deleted file mode 100644 index 6090516c9c7..00000000000 --- a/arch/x86_64/boot/video.S +++ /dev/null @@ -1,2043 +0,0 @@ -/* video.S - * - * Display adapter & video mode setup, version 2.13 (14-May-99) - * - * Copyright (C) 1995 -- 1998 Martin Mares <mj@ucw.cz> - * Based on the original setup.S code (C) Linus Torvalds and Mats Anderson - * - * Rewritten to use GNU 'as' by Chris Noe <stiker@northlink.com> May 1999 - * - * For further information, look at Documentation/svga.txt. - * - */ - -/* Enable autodetection of SVGA adapters and modes. */ -#undef CONFIG_VIDEO_SVGA - -/* Enable autodetection of VESA modes */ -#define CONFIG_VIDEO_VESA - -/* Enable compacting of mode table */ -#define CONFIG_VIDEO_COMPACT - -/* Retain screen contents when switching modes */ -#define CONFIG_VIDEO_RETAIN - -/* Enable local mode list */ -#undef CONFIG_VIDEO_LOCAL - -/* Force 400 scan lines for standard modes (hack to fix bad BIOS behaviour */ -#undef CONFIG_VIDEO_400_HACK - -/* Hack that lets you force specific BIOS mode ID and specific dimensions */ -#undef CONFIG_VIDEO_GFX_HACK -#define VIDEO_GFX_BIOS_AX 0x4f02 /* 800x600 on ThinkPad */ -#define VIDEO_GFX_BIOS_BX 0x0102 -#define VIDEO_GFX_DUMMY_RESOLUTION 0x6425 /* 100x37 */ - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -/* Special video modes */ -#define VIDEO_FIRST_SPECIAL 0x0f00 -#define VIDEO_80x25 0x0f00 -#define VIDEO_8POINT 0x0f01 -#define VIDEO_80x43 0x0f02 -#define VIDEO_80x28 0x0f03 -#define VIDEO_CURRENT_MODE 0x0f04 -#define VIDEO_80x30 0x0f05 -#define VIDEO_80x34 0x0f06 -#define VIDEO_80x60 0x0f07 -#define VIDEO_GFX_HACK 0x0f08 -#define VIDEO_LAST_SPECIAL 0x0f09 - -/* Video modes given by resolution */ -#define VIDEO_FIRST_RESOLUTION 0x1000 - -/* The "recalculate timings" flag */ -#define VIDEO_RECALC 0x8000 - -/* Positions of various video parameters passed to the kernel */ -/* (see also include/linux/tty.h) */ -#define PARAM_CURSOR_POS 0x00 -#define PARAM_VIDEO_PAGE 0x04 -#define PARAM_VIDEO_MODE 0x06 -#define PARAM_VIDEO_COLS 0x07 -#define PARAM_VIDEO_EGA_BX 0x0a -#define PARAM_VIDEO_LINES 0x0e -#define PARAM_HAVE_VGA 0x0f -#define PARAM_FONT_POINTS 0x10 - -#define PARAM_LFB_WIDTH 0x12 -#define PARAM_LFB_HEIGHT 0x14 -#define PARAM_LFB_DEPTH 0x16 -#define PARAM_LFB_BASE 0x18 -#define PARAM_LFB_SIZE 0x1c -#define PARAM_LFB_LINELENGTH 0x24 -#define PARAM_LFB_COLORS 0x26 -#define PARAM_VESAPM_SEG 0x2e -#define PARAM_VESAPM_OFF 0x30 -#define PARAM_LFB_PAGES 0x32 -#define PARAM_VESA_ATTRIB 0x34 -#define PARAM_CAPABILITIES 0x36 - -/* Define DO_STORE according to CONFIG_VIDEO_RETAIN */ -#ifdef CONFIG_VIDEO_RETAIN -#define DO_STORE call store_screen -#else -#define DO_STORE -#endif /* CONFIG_VIDEO_RETAIN */ - -# This is the main entry point called by setup.S -# %ds *must* be pointing to the bootsector -video: pushw %ds # We use different segments - pushw %ds # FS contains original DS - popw %fs - pushw %cs # DS is equal to CS - popw %ds - pushw %cs # ES is equal to CS - popw %es - xorw %ax, %ax - movw %ax, %gs # GS is zero - cld - call basic_detect # Basic adapter type testing (EGA/VGA/MDA/CGA) -#ifdef CONFIG_VIDEO_SELECT - movw %fs:(0x01fa), %ax # User selected video mode - cmpw $ASK_VGA, %ax # Bring up the menu - jz vid2 - - call mode_set # Set the mode - jc vid1 - - leaw badmdt, %si # Invalid mode ID - call prtstr -vid2: call mode_menu -vid1: -#ifdef CONFIG_VIDEO_RETAIN - call restore_screen # Restore screen contents -#endif /* CONFIG_VIDEO_RETAIN */ - call store_edid -#endif /* CONFIG_VIDEO_SELECT */ - call mode_params # Store mode parameters - popw %ds # Restore original DS - ret - -# Detect if we have CGA, MDA, EGA or VGA and pass it to the kernel. -basic_detect: - movb $0, %fs:(PARAM_HAVE_VGA) - movb $0x12, %ah # Check EGA/VGA - movb $0x10, %bl - int $0x10 - movw %bx, %fs:(PARAM_VIDEO_EGA_BX) # Identifies EGA to the kernel - cmpb $0x10, %bl # No, it's a CGA/MDA/HGA card. - je basret - - incb adapter - movw $0x1a00, %ax # Check EGA or VGA? - int $0x10 - cmpb $0x1a, %al # 1a means VGA... - jne basret # anything else is EGA. - - incb %fs:(PARAM_HAVE_VGA) # We've detected a VGA - incb adapter -basret: ret - -# Store the video mode parameters for later usage by the kernel. -# This is done by asking the BIOS except for the rows/columns -# parameters in the default 80x25 mode -- these are set directly, -# because some very obscure BIOSes supply insane values. -mode_params: -#ifdef CONFIG_VIDEO_SELECT - cmpb $0, graphic_mode - jnz mopar_gr -#endif - movb $0x03, %ah # Read cursor position - xorb %bh, %bh - int $0x10 - movw %dx, %fs |