diff options
Diffstat (limited to 'arch/x86/mach-visws/setup.c')
| -rw-r--r-- | arch/x86/mach-visws/setup.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/arch/x86/mach-visws/setup.c b/arch/x86/mach-visws/setup.c new file mode 100644 index 00000000000..1f81f10e03a --- /dev/null +++ b/arch/x86/mach-visws/setup.c @@ -0,0 +1,183 @@ +/* + * Unmaintained SGI Visual Workstation support. + * Split out from setup.c by davej@suse.de + */ + +#include <linux/smp.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> + +#include <asm/fixmap.h> +#include <asm/arch_hooks.h> +#include <asm/io.h> +#include <asm/e820.h> +#include <asm/setup.h> +#include "cobalt.h" +#include "piix4.h" + +int no_broadcast; + +char visws_board_type = -1; +char visws_board_rev = -1; + +void __init visws_get_board_type_and_rev(void) +{ + int raw; + + visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG) + >> PIIX_GPI_BD_SHIFT; + /* + * Get Board rev. + * First, we have to initialize the 307 part to allow us access + * to the GPIO registers. Let's map them at 0x0fc0 which is right + * after the PIIX4 PM section. + */ + outb_p(SIO_DEV_SEL, SIO_INDEX); + outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */ + + outb_p(SIO_DEV_MSB, SIO_INDEX); + outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */ + + outb_p(SIO_DEV_LSB, SIO_INDEX); + outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */ + + outb_p(SIO_DEV_ENB, SIO_INDEX); + outb_p(1, SIO_DATA); /* Enable GPIO registers. */ + + /* + * Now, we have to map the power management section to write + * a bit which enables access to the GPIO registers. + * What lunatic came up with this shit? + */ + outb_p(SIO_DEV_SEL, SIO_INDEX); + outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */ + + outb_p(SIO_DEV_MSB, SIO_INDEX); + outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */ + + outb_p(SIO_DEV_LSB, SIO_INDEX); + outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */ + + outb_p(SIO_DEV_ENB, SIO_INDEX); + outb_p(1, SIO_DATA); /* Enable PM registers. */ + + /* + * Now, write the PM register which enables the GPIO registers. + */ + outb_p(SIO_PM_FER2, SIO_PM_INDEX); + outb_p(SIO_PM_GP_EN, SIO_PM_DATA); + + /* + * Now, initialize the GPIO registers. + * We want them all to be inputs which is the + * power on default, so let's leave them alone. + * So, let's just read the board rev! + */ + raw = inb_p(SIO_GP_DATA1); + raw &= 0x7f; /* 7 bits of valid board revision ID. */ + + if (visws_board_type == VISWS_320) { + if (raw < 0x6) { + visws_board_rev = 4; + } else if (raw < 0xc) { + visws_board_rev = 5; + } else { + visws_board_rev = 6; + } + } else if (visws_board_type == VISWS_540) { + visws_board_rev = 2; + } else { + visws_board_rev = raw; + } + + printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n", + (visws_board_type == VISWS_320 ? "320" : + (visws_board_type == VISWS_540 ? "540" : + "unknown")), visws_board_rev); +} + +void __init pre_intr_init_hook(void) +{ + init_VISWS_APIC_irqs(); +} + +void __init intr_init_hook(void) +{ +#ifdef CONFIG_X86_LOCAL_APIC + apic_intr_init(); +#endif +} + +void __init pre_setup_arch_hook() +{ + visws_get_board_type_and_rev(); +} + +static struct irqaction irq0 = { + .handler = timer_interrupt, + .flags = IRQF_DISABLED | IRQF_IRQPOLL, + .name = "timer", +}; + +void __init time_init_hook(void) +{ + printk(KERN_INFO "Starting Cobalt Timer system clock\n"); + + /* Set the countdown value */ + co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); + + /* Start the timer */ + co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); + + /* Enable (unmask) the timer interrupt */ + co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); + + /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */ + setup_irq(0, &irq0); +} + +/* Hook for machine specific memory setup. */ + +#define MB (1024 * 1024) + +unsigned long sgivwfb_mem_phys; +unsigned long sgivwfb_mem_size; +EXPORT_SYMBOL(sgivwfb_mem_phys); +EXPORT_SYMBOL(sgivwfb_mem_size); + +long long mem_size __initdata = 0; + +char * __init machine_specific_memory_setup(void) +{ + long long gfx_mem_size = 8 * MB; + + mem_size = ALT_MEM_K; + + if (!mem_size) { + printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n"); + mem_size = 128 * MB; + } + + /* + * this hardcodes the graphics memory to 8 MB + * it really should be sized dynamically (or at least + * set as a boot param) + */ + if (!sgivwfb_mem_size) { + printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n"); + sgivwfb_mem_size = 8 * MB; + } + + /* + * Trim to nearest MB + */ + sgivwfb_mem_size &= ~((1 << 20) - 1); + sgivwfb_mem_phys = mem_size - gfx_mem_size; + + add_memory_region(0, LOWMEMSIZE(), E820_RAM); + add_memory_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM); + add_memory_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED); + + return "PROM"; +} |