aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel')
-rw-r--r--arch/x86/kernel/Makefile2
-rw-r--r--arch/x86/kernel/apic/apic.c253
-rw-r--r--arch/x86/kernel/apic/es7000_32.c2
-rw-r--r--arch/x86/kernel/apic/io_apic.c341
-rw-r--r--arch/x86/kernel/apic/probe_64.c2
-rw-r--r--arch/x86/kernel/apic/summit_32.c7
-rw-r--r--arch/x86/kernel/apic/x2apic_uv_x.c2
-rw-r--r--arch/x86/kernel/irq.c19
-rw-r--r--arch/x86/kernel/irqinit.c (renamed from arch/x86/kernel/irqinit_32.c)149
-rw-r--r--arch/x86/kernel/irqinit_64.c177
-rw-r--r--arch/x86/kernel/setup.c18
-rw-r--r--arch/x86/kernel/smp.c20
-rw-r--r--arch/x86/kernel/smpboot.c14
-rw-r--r--arch/x86/kernel/traps.c5
14 files changed, 442 insertions, 569 deletions
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 145cce75cda..16e3acfe19e 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -28,7 +28,7 @@ CFLAGS_paravirt.o := $(nostackp)
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y += setup.o i8259.o irqinit_$(BITS).o
+obj-y += setup.o i8259.o irqinit.o
obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index f2870920f24..28f747d61d7 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -98,6 +98,29 @@ early_param("lapic", parse_lapic);
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
+/*
+ * Handle interrupt mode configuration register (IMCR).
+ * This register controls whether the interrupt signals
+ * that reach the BSP come from the master PIC or from the
+ * local APIC. Before entering Symmetric I/O Mode, either
+ * the BIOS or the operating system must switch out of
+ * PIC Mode by changing the IMCR.
+ */
+static inline void imcr_pic_to_apic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go through APIC */
+ outb(0x01, 0x23);
+}
+
+static inline void imcr_apic_to_pic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go directly to BSP */
+ outb(0x00, 0x23);
+}
#endif
#ifdef CONFIG_X86_64
@@ -111,13 +134,19 @@ static __init int setup_apicpmtimer(char *s)
__setup("apicpmtimer", setup_apicpmtimer);
#endif
+int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
-int x2apic;
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
+ if (x2apic_enabled()) {
+ pr_warning("Bios already enabled x2apic, "
+ "can't enforce nox2apic");
+ return 0;
+ }
+
disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
@@ -209,6 +238,24 @@ static int modern_apic(void)
return lapic_get_version() >= 0x14;
}
+/*
+ * bare function to substitute write operation
+ * and it's _that_ fast :)
+ */
+void native_apic_write_dummy(u32 reg, u32 v)
+{
+ WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+/*
+ * right after this call apic->write doesn't do anything
+ * note that there is no restore operation it works one way
+ */
+void apic_disable(void)
+{
+ apic->write = native_apic_write_dummy;
+}
+
void native_apic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
@@ -815,7 +862,7 @@ void clear_local_APIC(void)
u32 v;
/* APIC hasn't been mapped yet */
- if (!x2apic && !apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
maxlvt = lapic_get_maxlvt();
@@ -1287,7 +1334,7 @@ void check_x2apic(void)
{
if (x2apic_enabled()) {
pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic = 1;
+ x2apic_preenabled = x2apic_mode = 1;
}
}
@@ -1295,7 +1342,7 @@ void enable_x2apic(void)
{
int msr, msr2;
- if (!x2apic)
+ if (!x2apic_mode)
return;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
@@ -1304,6 +1351,7 @@ void enable_x2apic(void)
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
+#endif /* CONFIG_X86_X2APIC */
void __init enable_IR_x2apic(void)
{
@@ -1312,32 +1360,21 @@ void __init enable_IR_x2apic(void)
unsigned long flags;
struct IO_APIC_route_entry **ioapic_entries = NULL;
- if (!cpu_has_x2apic)
- return;
-
- if (!x2apic_preenabled && disable_x2apic) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of nox2apic\n");
- return;
+ ret = dmar_table_init();
+ if (ret) {
+ pr_debug("dmar_table_init() failed with %d:\n", ret);
+ goto ir_failed;
}
- if (x2apic_preenabled && disable_x2apic)
- panic("Bios already enabled x2apic, can't enforce nox2apic");
-
- if (!x2apic_preenabled && skip_ioapic_setup) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of skipping io-apic setup\n");
- return;
+ if (!intr_remapping_supported()) {
+ pr_debug("intr-remapping not supported\n");
+ goto ir_failed;
}
- ret = dmar_table_init();
- if (ret) {
- pr_info("dmar_table_init() failed with %d:\n", ret);
- if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
- else
- pr_info("Not enabling x2apic,Intr-remapping\n");
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ pr_info("Skipped enabling intr-remap because of skipping "
+ "io-apic setup\n");
return;
}
@@ -1357,19 +1394,16 @@ void __init enable_IR_x2apic(void)
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (ret && x2apic_preenabled) {
- local_irq_restore(flags);
- panic("x2apic enabled by bios. But IR enabling failed");
- }
-
+ ret = enable_intr_remapping(x2apic_supported());
if (ret)
goto end_restore;
- if (!x2apic) {
- x2apic = 1;
+ pr_info("Enabled Interrupt-remapping\n");
+
+ if (x2apic_supported() && !x2apic_mode) {
+ x2apic_mode = 1;
enable_x2apic();
+ pr_info("Enabled x2apic\n");
}
end_restore:
@@ -1378,37 +1412,34 @@ end_restore:
* IR enabling failed
*/
restore_IO_APIC_setup(ioapic_entries);
- else
- reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries);
unmask_8259A();
local_irq_restore(flags);
end:
- if (!ret) {
- if (!x2apic_preenabled)
- pr_info("Enabled x2apic and interrupt-remapping\n");
- else
- pr_info("Enabled Interrupt-remapping\n");
- } else
- pr_err("Failed to enable Interrupt-remapping and x2apic\n");
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
+
+ if (!ret)
+ return;
+
+ir_failed:
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else if (cpu_has_x2apic)
+ pr_info("Not enabling x2apic,Intr-remapping\n");
#else
if (!cpu_has_x2apic)
return;
if (x2apic_preenabled)
panic("x2apic enabled prior OS handover,"
- " enable CONFIG_INTR_REMAP");
-
- pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
- " and x2apic\n");
+ " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
#endif
return;
}
-#endif /* CONFIG_X86_X2APIC */
+
#ifdef CONFIG_X86_64
/*
@@ -1539,7 +1570,7 @@ void __init early_init_lapic_mapping(void)
*/
void __init init_apic_mappings(void)
{
- if (x2apic) {
+ if (x2apic_mode) {
boot_cpu_physical_apicid = read_apic_id();
return;
}
@@ -1565,6 +1596,12 @@ void __init init_apic_mappings(void)
*/
if (boot_cpu_physical_apicid == -1U)
boot_cpu_physical_apicid = read_apic_id();
+
+ /* lets check if we may to NOP'ify apic operations */
+ if (!cpu_has_apic) {
+ pr_info("APIC: disable apic facility\n");
+ apic_disable();
+ }
}
/*
@@ -1733,8 +1770,7 @@ void __init connect_bsp_APIC(void)
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
+ imcr_pic_to_apic();
}
#endif
if (apic->enable_apic_mode)
@@ -1762,8 +1798,7 @@ void disconnect_bsp_APIC(int virt_wire_setup)
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
+ imcr_apic_to_pic();
return;
}
#endif
@@ -1969,10 +2004,10 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state)
local_irq_save(flags);
disable_local_APIC();
-#ifdef CONFIG_INTR_REMAP
+
if (intr_remapping_enabled)
disable_intr_remapping();
-#endif
+
local_irq_restore(flags);
return 0;
}
@@ -1982,8 +2017,6 @@ static int lapic_resume(struct sys_device *dev)
unsigned int l, h;
unsigned long flags;
int maxlvt;
-
-#ifdef CONFIG_INTR_REMAP
int ret;
struct IO_APIC_route_entry **ioapic_entries = NULL;
@@ -1991,7 +2024,7 @@ static int lapic_resume(struct sys_device *dev)
return 0;
local_irq_save(flags);
- if (x2apic) {
+ if (intr_remapping_enabled) {
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
WARN(1, "Alloc ioapic_entries in lapic resume failed.");
@@ -2007,17 +2040,10 @@ static int lapic_resume(struct sys_device *dev)
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- enable_x2apic();
}
-#else
- if (!apic_pm_state.active)
- return 0;
- local_irq_save(flags);
- if (x2apic)
+ if (x2apic_mode)
enable_x2apic();
-#endif
-
else {
/*
* Make sure the APICBASE points to the right address
@@ -2055,20 +2081,15 @@ static int lapic_resume(struct sys_device *dev)
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
-#ifdef CONFIG_INTR_REMAP
- if (intr_remapping_enabled)
- reenable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (x2apic) {
+ if (intr_remapping_enabled) {
+ reenable_intr_remapping(x2apic_mode);
unmask_8259A();
restore_IO_APIC_setup(ioapic_entries);
free_ioapic_entries(ioapic_entries);
}
-#endif
local_irq_restore(flags);
-
return 0;
}
@@ -2117,31 +2138,14 @@ static void apic_pm_activate(void) { }
#endif /* CONFIG_PM */
#ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
+
+static int __cpuinit apic_cluster_num(void)
{
int i, clusters, zeros;
unsigned id;
u16 *bios_cpu_apicid;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /*
- * there is not this kind of box with AMD CPU yet.
- * Some AMD box with quadcore cpu and 8 sockets apicid
- * will be [4, 0x23] or [8, 0x27] could be thought to
- * vsmp box still need checking...
- */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
- return 0;
-
bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
@@ -2177,18 +2181,67 @@ __cpuinit int apic_is_clustered_box(void)
++zeros;
}
- /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
- * not guaranteed to be synced between boards
- */
- if (is_vsmp_box() && clusters > 1)
+ return clusters;
+}
+
+static int __cpuinitdata multi_checked;
+static int __cpuinitdata multi;
+
+static int __cpuinit set_multi(const struct dmi_system_id *d)
+{
+ if (multi)
+ return 0;
+ printk(KERN_INFO "APIC: %s detected, Multi Chassis\n", d->ident);
+ multi = 1;
+ return 0;
+}
+
+static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = {
+ {
+ .callback = set_multi,
+ .ident = "IBM System Summit2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"),
+ },
+ },
+ {}
+};
+
+static void __cpuinit dmi_check_multi(void)
+{
+ if (multi_checked)
+ return;
+
+ dmi_check_system(multi_dmi_table);
+ multi_checked = 1;
+}
+
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis.
+ * Use DMI to check them
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+ dmi_check_multi();
+ if (multi)
return 1;
+ if (!is_vsmp_box())
+ return 0;
+
/*
- * If clusters > 2, then should be multi-chassis.
- * May have to revisit this when multi-core + hyperthreaded CPUs come
- * out, but AFAIK this will work even for them.
+ * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+ * not guaranteed to be synced between boards
*/
- return (clusters > 2);
+ if (apic_cluster_num() > 1)
+ return 1;
+
+ return 0;
}
#endif
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 1c11b819f24..8e07c141866 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -145,7 +145,7 @@ es7000_rename_gsi(int ioapic, int gsi)
return gsi;
}
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
{
unsigned long vect = 0, psaival = 0;
diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c
index e583291fe6c..21c30e1121e 100644
--- a/arch/x86/kernel/apic/io_apic.c
+++ b/arch/x86/kernel/apic/io_apic.c
@@ -489,121 +489,6 @@ static void ioapic_mask_entry(int apic, int pin)
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-#ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
-{
- cpumask_var_t cleanup_mask;
-
- if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
- unsigned int i;
- cfg->move_cleanup_count = 0;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- cfg->move_cleanup_count++;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
- } else {
- cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
- cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
- apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
- free_cpumask_var(cleanup_mask);
- }
- cfg->move_in_progress = 0;
-}
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
- u8 vector = cfg->vector;
-
- entry = cfg->irq_2_pin;
- for (;;) {
- unsigned int reg;
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- /*
- * With interrupt-remapping, destination information comes
- * from interrupt-remapping table entry.
- */
- if (!irq_remapped(irq))
- io_apic_write(apic, 0x11 + pin*2, dest);
- reg = io_apic_read(apic, 0x10 + pin*2);
- reg &= ~IO_APIC_REDIR_VECTOR_MASK;
- reg |= vector;
- io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
- }
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
-/*
- * Either sets desc->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
- * leaves desc->affinity untouched.
- */
-static unsigned int
-set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned int irq;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return BAD_APICID;
-
- irq = desc->irq;
- cfg = desc->chip_data;
- if (assign_irq_vector(irq, cfg, mask))
- return BAD_APICID;
-
- cpumask_copy(desc->affinity, mask);
-
- return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
-}
-
-static int
-set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int dest;
- unsigned int irq;
- int ret = -1;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- dest = set_desc_affinity(desc, mask);
- if (dest != BAD_APICID) {
- /* Only the high 8 bits are valid. */
- dest = SET_APIC_LOGICAL_ID(dest);
- __target_IO_APIC_irq(irq, dest, cfg);
- ret = 0;
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
-
- return ret;
-}
-
-static int
-set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
-{
- struct irq_desc *desc;
-
- desc = irq_to_desc(irq);
-
- return set_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif /* CONFIG_SMP */
-
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
@@ -822,7 +707,6 @@ static int __init ioapic_pirq_setup(char *str)
__setup("pirq=", ioapic_pirq_setup);
#endif /* CONFIG_X86_32 */
-#ifdef CONFIG_INTR_REMAP
struct IO_APIC_route_entry **alloc_ioapic_entries(void)
{
int apic;
@@ -920,20 +804,6 @@ int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries)
return 0;
}
-void reinit_intr_remapped_IO_APIC(int intr_remapping,
- struct IO_APIC_route_entry **ioapic_entries)
-
-{
- /*
- * for now plain restore of previous settings.
- * TBD: In the case of OS enabling interrupt-remapping,
- * IO-APIC RTE's need to be setup to point to interrupt-remapping
- * table entries. for now, do a plain restore, and wait for
- * the setup_IO_APIC_irqs() to do proper initialization.
- */
- restore_IO_APIC_setup(ioapic_entries);
-}
-
void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
{
int apic;
@@ -943,7 +813,6 @@ void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
kfree(ioapic_entries);
}
-#endif
/*
* Find the IRQ entry number of a certain pin.
@@ -2332,6 +2201,118 @@ static int ioapic_retrigger_irq(unsigned int irq)
*/
#ifdef CONFIG_SMP
+static void send_cleanup_vector(struct irq_cfg *cfg)
+{
+ cpumask_var_t cleanup_mask;
+
+ if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
+ unsigned int i;
+ cfg->move_cleanup_count = 0;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ cfg->move_cleanup_count++;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+ } else {
+ cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+ cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
+ apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ free_cpumask_var(cleanup_mask);
+ }
+ cfg->move_in_progress = 0;
+}
+
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+ u8 vector = cfg->vector;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+ unsigned int reg;
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(irq))
+ io_apic_write(apic, 0x11 + pin*2, dest);
+ reg = io_apic_read(apic, 0x10 + pin*2);
+ reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+ reg |= vector;
+ io_apic_modify(apic, 0x10 + pin*2, reg);
+ if (!entry->next)
+ break;
+ entry = entry->next;
+ }
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
+
+/*
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
+ */
+static unsigned int
+set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned int irq;
+
+ if (!cpumask_intersects(mask, cpu_online_mask))
+ return BAD_APICID;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+ if (assign_irq_vector(irq, cfg, mask))
+ return BAD_APICID;
+
+ cpumask_copy(desc->affinity, mask);
+
+ return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
+}
+
+static int
+set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int dest;
+ unsigned int irq;
+ int ret = -1;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ dest = set_desc_affinity(desc, mask);
+ if (dest != BAD_APICID) {
+ /* Only the high 8 bits are valid. */
+ dest = SET_APIC_LOGICAL_ID(dest);
+ __target_IO_APIC_irq(irq, dest, cfg);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return ret;
+}
+
+static int
+set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
+{
+ struct irq_desc *desc;
+
+ desc = irq_to_desc(irq);
+
+ return set_ioapic_affinity_irq_desc(desc, mask);
+}
#ifdef CONFIG_INTR_REMAP
@@ -2478,53 +2459,6 @@ static void irq_complete_move(struct irq_desc **descp)
static inline void irq_complete_move(struct irq_desc **descp) {}
#endif
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
-
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int irq;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __eoi_ioapic_irq(irq, cfg);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_X86_X2APIC
-static void ack_x2apic_level(unsigned int irq)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- ack_x2APIC_irq();
- eoi_ioapic_irq(desc);
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
- ack_x2APIC_irq();
-}
-#endif
-
static void ack_apic_edge(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
@@ -2588,9 +2522,6 @@ static void ack_apic_level(unsigned int irq)
*/
ack_APIC_irq();
- if (irq_remapped(irq))
- eoi_ioapic_irq(desc);
-
/* Now we can move and renable the irq */
if (unlikely(do_unmask_irq)) {
/* Only migrate the irq if the ack has been received.
@@ -2637,22 +2568,50 @@ static void ack_apic_level(unsigned int irq)
}
#ifdef CONFIG_INTR_REMAP
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ io_apic_eoi(apic, pin);
+ entry = entry->next;
+ }
+}
+
+static void
+eoi_ioapic_irq(struct irq_desc *desc)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int irq;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __eoi_ioapic_irq(irq, cfg);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
static void ir_ack_apic_edge(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_edge(irq);
-#endif
- return ack_apic_edge(irq);
+ ack_APIC_irq();
}
static void ir_ack_apic_level(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_level(irq);
-#endif
- return ack_apic_level(irq);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ ack_APIC_irq();
+ eoi_ioapic_irq(desc);
}
#endif /* CONFIG_INTR_REMAP */
diff --git a/arch/x86/kernel/apic/probe_64.c b/arch/x86/kernel/apic/probe_64.c
index 1783652bb0e..bc3e880f9b8 100644
--- a/arch/x86/kernel/apic/probe_64.c
+++ b/arch/x86/kernel/apic/probe_64.c
@@ -50,7 +50,7 @@ static struct apic *apic_probe[] __initdata = {
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode && (apic != &apic_x2apic_phys &&
#ifdef CONFIG_X86_UV
apic != &apic_x2apic_uv_x &&
#endif
diff --git a/arch/x86/kernel/apic/summit_32.c b/arch/x86/kernel/apic/summit_32.c
index 9cfe1f415d8..344eee4ac0a 100644
--- a/arch/x86/kernel/apic/summit_32.c
+++ b/arch/x86/kernel/apic/summit_32.c
@@ -173,13 +173,6 @@ static inline int is_WPEG(struct rio_detail *rio){
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT 4
-#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static const struct cpumask *summit_target_cpus(void)
diff --git a/arch/x86/kernel/apic/x2apic_uv_x.c b/arch/x86/kernel/apic/x2apic_uv_x.c
index 2bda6935297..93d604dee9b 100644
--- a/arch/x86/kernel/apic/x2apic_uv_x.c
+++ b/arch/x86/kernel/apic/x2apic_uv_x.c
@@ -105,7 +105,7 @@ static void uv_vector_allocation_domain(int cpu, struct cpumask *retmask)
cpumask_set_cpu(cpu, retmask);
}
-static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
#ifdef CONFIG_SMP
unsigned long val;
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index c3fe010d74c..c1739ac2970 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -24,9 +24,9 @@ void (*generic_interrupt_extension)(void) = NULL;
*/
void ack_bad_irq(unsigned int irq)
{
- printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+ if (printk_ratelimit())
+ pr_err("unexpected IRQ trap at vector %02x\n", irq);
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
@@ -36,9 +36,7 @@ void ack_bad_irq(unsigned int irq)
* completely.
* But only ack when the APIC is enabled -AK
*/
- if (cpu_has_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
}
#define irq_stats(x) (&per_cpu(irq_stat, x))
@@ -178,7 +176,7 @@ u64 arch_irq_stat_cpu(unsigned int cpu)
sum += irq_stats(cpu)->irq_thermal_count;
# ifdef CONFIG_X86_64
sum += irq_stats(cpu)->irq_threshold_count;
-#endif
+# endif
#endif
return sum;
}
@@ -213,14 +211,11 @@ unsigned int __irq_entry do_IRQ(struct pt_regs *regs)
irq = __get_cpu_var(vector_irq)[vector];
if (!handle_irq(irq, regs)) {
-#ifdef CONFIG_X86_64
- if (!disable_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
if (printk_ratelimit())
- printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n",
- __func__, smp_processor_id(), vector, irq);
+ pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n",
+ __func__, smp_processor_id(), vector, irq);
}
irq_exit();
diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit.c
index 368b0a8836f..2e08b10ad51 100644
--- a/arch/x86/kernel/irqinit_32.c
+++ b/arch/x86/kernel/irqinit.c
@@ -1,20 +1,25 @@
+#include <linux/linkage.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
+#include <linux/timex.h>
#include <linux/slab.h>
#include <linux/random.h>
+#include <linux/kprobes.h>
#include <linux/init.h>
#include <linux/kernel_stat.h>
#include <linux/sysdev.h>
#include <linux/bitops.h>
+#include <linux/acpi.h>
#include <linux/io.h>
#include <linux/delay.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/timer.h>
+#include <asm/hw_irq.h>
#include <asm/pgtable.h>
#include <asm/desc.h>
#include <asm/apic.h>
@@ -22,7 +27,23 @@
#include <asm/i8259.h>
#include <asm/traps.h>
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+#ifdef CONFIG_X86_32
/*
* Note that on a 486, we don't want to do a SIGFPE on an irq13
* as the irq is unreliable, and exception 16 works correctly
@@ -52,30 +73,7 @@ static struct irqaction fpu_irq = {
.handler = math_error_irq,
.name = "fpu",
};
-
-void __init init_ISA_irqs(void)
-{
- int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- init_bsp_APIC();
#endif
- init_8259A(0);
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
/*
* IRQ2 is cascade interrupt to second interrupt controller
@@ -118,29 +116,37 @@ int vector_used_by_percpu_irq(unsigned int vector)
return 0;
}
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
+static void __init init_ISA_irqs(void)
{
int i;
- /* Execute any quirks before the call gates are initialised: */
- x86_quirk_pre_intr_init();
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
/*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
+ * 16 old-style INTA-cycle interrupts:
*/
- for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* SYSCALL_VECTOR was reserved in trap_init. */
- if (i != SYSCALL_VECTOR)
- set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+ for (i = 0; i < NR_IRQS_LEGACY; i++) {
+ struct irq_desc *desc = irq_to_desc(i);
+
+ desc->status = IRQ_DISABLED;
+ desc->action = NULL;
+ desc->depth = 1;
+
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
}
+}
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
/*
* The reschedule interrupt is a CPU-to-CPU reschedule-helper
* IPI, driven by wakeup.
@@ -160,16 +166,27 @@ void __init native_init_IRQ(void)
/* IPI for generic function call */
alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
- /* IPI for single call function */
+ /* IPI for generic single function call */
alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
+ call_function_single_interrupt);
/* Low priority IPI to cleanup after moving an irq */
set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
#endif
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+ smp_intr_init();
+
+#ifdef CONFIG_X86_64
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
-#ifdef CONFIG_X86_LOCAL_APIC
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
/* self generated IPI for local APIC timer */
alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
@@ -179,16 +196,67 @@ void __init native_init_IRQ(void)
/* IPI vectors for APIC spurious and error interrupts */
alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ /* Performance monitoring interrupts: */
+# ifdef CONFIG_PERF_COUNTERS
+ alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt);
+ alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
+# endif
+
#endif
+#ifdef CONFIG_X86_32
#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
/* thermal monitor LVT interrupt */
alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
#endif
+#endif
+}
+
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+#ifdef CONFIG_X86_32
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+#endif
+ init_ISA_irqs();
+}
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ /* Execute any quirks before the call gates are initialised: */
+ x86_quirk_pre_intr_init();
+
+ apic_intr_init();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+ /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+ if (!test_bit(i, used_vectors))
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+ }
if (!acpi_ioapic)
setup_irq(2, &irq2);
+#ifdef CONFIG_X86_32
/*
* Call quirks after call gates are initialised (usually add in
* the architecture specific gates):
@@ -203,4 +271,5 @@ void __init native_init_IRQ(void)
setup_irq(FPU_IRQ, &fpu_irq);
irq_ctx_init(smp_processor_id());
+#endif
}
diff --git a/arch/x86/kernel/irqinit_64.c b/arch/x86/kernel/irqinit_64.c
deleted file mode 100644
index 8cd10537fd4..00000000000
--- a/arch/x86/kernel/irqinit_64.c
+++ /dev/null
@@ -1,177 +0,0 @@
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
- .handler = no_action,
- .name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (per_cpu(vector_irq, cpu)[vector] != -1)
- return 1;
- }
-
- return 0;
-}
-
-static void __init init_ISA_irqs(void)
-{
- int i;
-
- init_bsp_APIC();
- init_8259A(0);
-
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-static void __init smp_intr_init(void)
-{
-#ifdef CONFIG_SMP
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for generic single function call */
- alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
- set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-}
-
-static void __init apic_intr_init(void)
-{
- smp_intr_init();
-
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
- alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* generic IPI for platform specific use */
- alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-}
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
- apic_intr_init();
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index b4158439bf6..523bb697120 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -997,24 +997,6 @@ void __init setup_arch(char **cmdline_p)
#ifdef CONFIG_X86_32
/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init x86_quirk_pre_intr_init(void)
-{
- if (x86_quirks->arch_pre_intr_init) {
- if (x86_quirks->arch_pre_intr_init())
- return;
- }
- init_ISA_irqs();
-}
-
-/**
* x86_quirk_intr_init - post gate setup interrupt initialisation
*
* Description:
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 13f33ea8cca..f6db48c405b 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -193,19 +193,19 @@ void smp_call_function_single_interrupt(struct pt_regs *regs)
}
struct smp_ops smp_ops = {
- .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
- .smp_prepare_cpus = native_smp_prepare_cpus,
- .smp_cpus_done = native_smp_cpus_done,
+ .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
+ .smp_prepare_cpus = native_smp_prepare_cpus,
+ .smp_cpus_done = native_smp_cpus_done,
- .smp_send_stop = native_smp_send_stop,
- .smp_send_reschedule = native_smp_send_reschedule,
+ .smp_send_stop = native_smp_send_stop,
+ .smp_send_reschedule = native_smp_send_reschedule,
- .cpu_up = native_cpu_up,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
+ .cpu_up = native_cpu_up,
+ .cpu_die = native_cpu_die,
+ .cpu_disable = native_cpu_disable,
+ .play_dead = native_play_dead,
- .send_call_func_ipi = native_send_call_func_ipi,
+ .send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
EXPORT_SYMBOL_GPL(smp_ops);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 58d24ef917d..d2e8de95815 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -504,7 +504,7 @@ void __inquire_remote_apic(int apicid)
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-int __devinit
+int __cpuinit
wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
@@ -538,7 +538,7 @@ wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
return (send_status | accept_status);
}
-int __devinit
+static int __cpuinit
wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
@@ -822,10 +822,12 @@ do_rest:
/* mark "stuck" area as not stuck */
*((volatile unsigned long *)trampoline_base) = 0;
- /*
- * Cleanup possible dangling ends...
- */
- smpboot_restore_warm_reset_vector();
+ if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
+ /*
+ * Cleanup possible dangling ends...
+ */
+ smpboot_restore_warm_reset_vector();
+ }
return boot_error;
}
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index a1d288327ff..2310700faca 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -969,11 +969,8 @@ void __init trap_init(void)
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
-#ifdef CONFIG_X86_64
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
-#else
- set_bit(SYSCALL_VECTOR, used_vectors);
-#endif
+
/*
* Should be a barrier for any external CPU state:
*/