diff options
Diffstat (limited to 'arch/x86/kernel/traps.c')
-rw-r--r-- | arch/x86/kernel/traps.c | 1026 |
1 files changed, 1026 insertions, 0 deletions
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c new file mode 100644 index 00000000000..04d242ab016 --- /dev/null +++ b/arch/x86/kernel/traps.c @@ -0,0 +1,1026 @@ +/* + * Copyright (C) 1991, 1992 Linus Torvalds + * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs + * + * Pentium III FXSR, SSE support + * Gareth Hughes <gareth@valinux.com>, May 2000 + */ + +/* + * Handle hardware traps and faults. + */ +#include <linux/interrupt.h> +#include <linux/kallsyms.h> +#include <linux/spinlock.h> +#include <linux/kprobes.h> +#include <linux/uaccess.h> +#include <linux/utsname.h> +#include <linux/kdebug.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/ptrace.h> +#include <linux/string.h> +#include <linux/unwind.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/kexec.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/bug.h> +#include <linux/nmi.h> +#include <linux/mm.h> +#include <linux/smp.h> +#include <linux/io.h> + +#ifdef CONFIG_EISA +#include <linux/ioport.h> +#include <linux/eisa.h> +#endif + +#ifdef CONFIG_MCA +#include <linux/mca.h> +#endif + +#if defined(CONFIG_EDAC) +#include <linux/edac.h> +#endif + +#include <asm/stacktrace.h> +#include <asm/processor.h> +#include <asm/debugreg.h> +#include <asm/atomic.h> +#include <asm/system.h> +#include <asm/unwind.h> +#include <asm/traps.h> +#include <asm/desc.h> +#include <asm/i387.h> + +#include <mach_traps.h> + +#ifdef CONFIG_X86_64 +#include <asm/pgalloc.h> +#include <asm/proto.h> +#include <asm/pda.h> +#else +#include <asm/processor-flags.h> +#include <asm/arch_hooks.h> +#include <asm/nmi.h> +#include <asm/smp.h> +#include <asm/io.h> +#include <asm/traps.h> + +#include "cpu/mcheck/mce.h" + +DECLARE_BITMAP(used_vectors, NR_VECTORS); +EXPORT_SYMBOL_GPL(used_vectors); + +asmlinkage int system_call(void); + +/* Do we ignore FPU interrupts ? */ +char ignore_fpu_irq; + +/* + * The IDT has to be page-aligned to simplify the Pentium + * F0 0F bug workaround.. We have a special link segment + * for this. + */ +gate_desc idt_table[256] + __attribute__((__section__(".data.idt"))) = { { { { 0, 0 } } }, }; +#endif + +static int ignore_nmis; + +static inline void conditional_sti(struct pt_regs *regs) +{ + if (regs->flags & X86_EFLAGS_IF) + local_irq_enable(); +} + +static inline void preempt_conditional_sti(struct pt_regs *regs) +{ + inc_preempt_count(); + if (regs->flags & X86_EFLAGS_IF) + local_irq_enable(); +} + +static inline void preempt_conditional_cli(struct pt_regs *regs) +{ + if (regs->flags & X86_EFLAGS_IF) + local_irq_disable(); + dec_preempt_count(); +} + +#ifdef CONFIG_X86_32 +static inline void +die_if_kernel(const char *str, struct pt_regs *regs, long err) +{ + if (!user_mode_vm(regs)) + die(str, regs, err); +} + +/* + * Perform the lazy TSS's I/O bitmap copy. If the TSS has an + * invalid offset set (the LAZY one) and the faulting thread has + * a valid I/O bitmap pointer, we copy the I/O bitmap in the TSS, + * we set the offset field correctly and return 1. + */ +static int lazy_iobitmap_copy(void) +{ + struct thread_struct *thread; + struct tss_struct *tss; + int cpu; + + cpu = get_cpu(); + tss = &per_cpu(init_tss, cpu); + thread = ¤t->thread; + + if (tss->x86_tss.io_bitmap_base == INVALID_IO_BITMAP_OFFSET_LAZY && + thread->io_bitmap_ptr) { + memcpy(tss->io_bitmap, thread->io_bitmap_ptr, + thread->io_bitmap_max); + /* + * If the previously set map was extending to higher ports + * than the current one, pad extra space with 0xff (no access). + */ + if (thread->io_bitmap_max < tss->io_bitmap_max) { + memset((char *) tss->io_bitmap + + thread->io_bitmap_max, 0xff, + tss->io_bitmap_max - thread->io_bitmap_max); + } + tss->io_bitmap_max = thread->io_bitmap_max; + tss->x86_tss.io_bitmap_base = IO_BITMAP_OFFSET; + tss->io_bitmap_owner = thread; + put_cpu(); + + return 1; + } + put_cpu(); + + return 0; +} +#endif + +static void __kprobes +do_trap(int trapnr, int signr, char *str, struct pt_regs *regs, + long error_code, siginfo_t *info) +{ + struct task_struct *tsk = current; + +#ifdef CONFIG_X86_32 + if (regs->flags & X86_VM_MASK) { + /* + * traps 0, 1, 3, 4, and 5 should be forwarded to vm86. + * On nmi (interrupt 2), do_trap should not be called. + */ + if (trapnr < 6) + goto vm86_trap; + goto trap_signal; + } +#endif + + if (!user_mode(regs)) + goto kernel_trap; + +#ifdef CONFIG_X86_32 +trap_signal: +#endif + /* + * We want error_code and trap_no set for userspace faults and + * kernelspace faults which result in die(), but not + * kernelspace faults which are fixed up. die() gives the + * process no chance to handle the signal and notice the + * kernel fault information, so that won't result in polluting + * the information about previously queued, but not yet + * delivered, faults. See also do_general_protection below. + */ + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + +#ifdef CONFIG_X86_64 + if (show_unhandled_signals && unhandled_signal(tsk, signr) && + printk_ratelimit()) { + printk(KERN_INFO + "%s[%d] trap %s ip:%lx sp:%lx error:%lx", + tsk->comm, tsk->pid, str, + regs->ip, regs->sp, error_code); + print_vma_addr(" in ", regs->ip); + printk("\n"); + } +#endif + + if (info) + force_sig_info(signr, info, tsk); + else + force_sig(signr, tsk); + return; + +kernel_trap: + if (!fixup_exception(regs)) { + tsk->thread.error_code = error_code; + tsk->thread.trap_no = trapnr; + die(str, regs, error_code); + } + return; + +#ifdef CONFIG_X86_32 +vm86_trap: + if (handle_vm86_trap((struct kernel_vm86_regs *) regs, + error_code, trapnr)) + goto trap_signal; + return; +#endif +} + +#define DO_ERROR(trapnr, signr, str, name) \ +dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \ +{ \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + conditional_sti(regs); \ + do_trap(trapnr, signr, str, regs, error_code, NULL); \ +} + +#define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \ +dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \ +{ \ + siginfo_t info; \ + info.si_signo = signr; \ + info.si_errno = 0; \ + info.si_code = sicode; \ + info.si_addr = (void __user *)siaddr; \ + if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ + == NOTIFY_STOP) \ + return; \ + conditional_sti(regs); \ + do_trap(trapnr, signr, str, regs, error_code, &info); \ +} + +DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip) +DO_ERROR(4, SIGSEGV, "overflow", overflow) +DO_ERROR(5, SIGSEGV, "bounds", bounds) +DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip) +DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun) +DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS) +DO_ERROR(11, SIGBUS, "segment not present", segment_not_present) +#ifdef CONFIG_X86_32 +DO_ERROR(12, SIGBUS, "stack segment", stack_segment) +#endif +DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0) + +#ifdef CONFIG_X86_64 +/* Runs on IST stack */ +dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code) +{ + if (notify_die(DIE_TRAP, "stack segment", regs, error_code, + 12, SIGBUS) == NOTIFY_STOP) + return; + preempt_conditional_sti(regs); + do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL); + preempt_conditional_cli(regs); +} + +dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code) +{ + static const char str[] = "double fault"; + struct task_struct *tsk = current; + + /* Return not checked because double check cannot be ignored */ + notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV); + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 8; + + /* This is always a kernel trap and never fixable (and thus must + never return). */ + for (;;) + die(str, regs, error_code); +} +#endif + +dotraplinkage void __kprobes +do_general_protection(struct pt_regs *regs, long error_code) +{ + struct task_struct *tsk; + + conditional_sti(regs); + +#ifdef CONFIG_X86_32 + if (lazy_iobitmap_copy()) { + /* restart the faulting instruction */ + return; + } + + if (regs->flags & X86_VM_MASK) + goto gp_in_vm86; +#endif + + tsk = current; + if (!user_mode(regs)) + goto gp_in_kernel; + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && + printk_ratelimit()) { + printk(KERN_INFO + "%s[%d] general protection ip:%lx sp:%lx error:%lx", + tsk->comm, task_pid_nr(tsk), + regs->ip, regs->sp, error_code); + print_vma_addr(" in ", regs->ip); + printk("\n"); + } + + force_sig(SIGSEGV, tsk); + return; + +#ifdef CONFIG_X86_32 +gp_in_vm86: + local_irq_enable(); + handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code); + return; +#endif + +gp_in_kernel: + if (fixup_exception(regs)) + return; + + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 13; + if (notify_die(DIE_GPF, "general protection fault", regs, + error_code, 13, SIGSEGV) == NOTIFY_STOP) + return; + die("general protection fault", regs, error_code); +} + +static notrace __kprobes void +mem_parity_error(unsigned char reason, struct pt_regs *regs) +{ + printk(KERN_EMERG + "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", + reason, smp_processor_id()); + + printk(KERN_EMERG + "You have some hardware problem, likely on the PCI bus.\n"); + +#if defined(CONFIG_EDAC) + if (edac_handler_set()) { + edac_atomic_assert_error(); + return; + } +#endif + + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); + + /* Clear and disable the memory parity error line. */ + reason = (reason & 0xf) | 4; + outb(reason, 0x61); +} + +static notrace __kprobes void +io_check_error(unsigned char reason, struct pt_regs *regs) +{ + unsigned long i; + + printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n"); + show_registers(regs); + + /* Re-enable the IOCK line, wait for a few seconds */ + reason = (reason & 0xf) | 8; + outb(reason, 0x61); + + i = 2000; + while (--i) + udelay(1000); + + reason &= ~8; + outb(reason, 0x61); +} + +static notrace __kprobes void +unknown_nmi_error(unsigned char reason, struct pt_regs *regs) +{ + if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) == + NOTIFY_STOP) + return; +#ifdef CONFIG_MCA + /* + * Might actually be able to figure out what the guilty party + * is: + */ + if (MCA_bus) { + mca_handle_nmi(); + return; + } +#endif + printk(KERN_EMERG + "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n", + reason, smp_processor_id()); + + printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n"); + if (panic_on_unrecovered_nmi) + panic("NMI: Not continuing"); + + printk(KERN_EMERG "Dazed and confused, but trying to continue\n"); +} + +static notrace __kprobes void default_do_nmi(struct pt_regs *regs) +{ + unsigned char reason = 0; + int cpu; + + cpu = smp_processor_id(); + + /* Only the BSP gets external NMIs from the system. */ + if (!cpu) + reason = get_nmi_reason(); + + if (!(reason & 0xc0)) { + if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT) + == NOTIFY_STOP) + return; +#ifdef CONFIG_X86_LOCAL_APIC + /* + * Ok, so this is none of the documented NMI sources, + * so it must be the NMI watchdog. + */ + if (nmi_watchdog_tick(regs, reason)) + return; + if (!do_nmi_callback(regs, cpu)) + unknown_nmi_error(reason, regs); +#else + unknown_nmi_error(reason, regs); +#endif + + return; + } + if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP) + return; + + /* AK: following checks seem to be broken on modern chipsets. FIXME */ + if (reason & 0x80) + mem_parity_error(reason, regs); + if (reason & 0x40) + io_check_error(reason, regs); +#ifdef CONFIG_X86_32 + /* + * Reassert NMI in case it became active meanwhile + * as it's edge-triggered: + */ + reassert_nmi(); +#endif +} + +dotraplinkage notrace __kprobes void +do_nmi(struct pt_regs *regs, long error_code) +{ + nmi_enter(); + +#ifdef CONFIG_X86_32 + { int cpu; cpu = smp_processor_id(); ++nmi_count(cpu); } +#else + add_pda(__nmi_count, 1); +#endif + + if (!ignore_nmis) + default_do_nmi(regs); + + nmi_exit(); +} + +void stop_nmi(void) +{ + acpi_nmi_disable(); + ignore_nmis++; +} + +void restart_nmi(void) +{ + ignore_nmis--; + acpi_nmi_enable(); +} + +/* May run on IST stack. */ +dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code) +{ +#ifdef CONFIG_KPROBES + if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP) + == NOTIFY_STOP) + return; +#else + if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP) + == NOTIFY_STOP) + return; +#endif + + preempt_conditional_sti(regs); + do_trap(3, SIGTRAP, "int3", regs, error_code, NULL); + preempt_conditional_cli(regs); +} + +#ifdef CONFIG_X86_64 +/* Help handler running on IST stack to switch back to user stack + for scheduling or signal handling. The actual stack switch is done in + entry.S */ +asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs) +{ + struct pt_regs *regs = eregs; + /* Did already sync */ + if (eregs == (struct pt_regs *)eregs->sp) + ; + /* Exception from user space */ + else if (user_mode(eregs)) + regs = task_pt_regs(current); + /* Exception from kernel and interrupts are enabled. Move to + kernel process stack. */ + else if (eregs->flags & X86_EFLAGS_IF) + regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs)); + if (eregs != regs) + *regs = *eregs; + return regs; +} +#endif + +/* + * Our handling of the processor debug registers is non-trivial. + * We do not clear them on entry and exit from the kernel. Therefore + * it is possible to get a watchpoint trap here from inside the kernel. + * However, the code in ./ptrace.c has ensured that the user can + * only set watchpoints on userspace addresses. Therefore the in-kernel + * watchpoint trap can only occur in code which is reading/writing + * from user space. Such code must not hold kernel locks (since it + * can equally take a page fault), therefore it is safe to call + * force_sig_info even though that claims and releases locks. + * + * Code in ./signal.c ensures that the debug control register + * is restored before we deliver any signal, and therefore that + * user code runs with the correct debug control register even though + * we clear it here. + * + * Being careful here means that we don't have to be as careful in a + * lot of more complicated places (task switching can be a bit lazy + * about restoring all the debug state, and ptrace doesn't have to + * find every occurrence of the TF bit that could be saved away even + * by user code) + * + * May run on IST stack. + */ +dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code) +{ + struct task_struct *tsk = current; + unsigned long condition; + int si_code; + + get_debugreg(condition, 6); + + /* + * The processor cleared BTF, so don't mark that we need it set. + */ + clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR); + tsk->thread.debugctlmsr = 0; + + if (notify_die(DIE_DEBUG, "debug", regs, condition, error_code, + SIGTRAP) == NOTIFY_STOP) + return; + + /* It's safe to allow irq's after DR6 has been saved */ + preempt_conditional_sti(regs); + + /* Mask out spurious debug traps due to lazy DR7 setting */ + if (condition & (DR_TRAP0|DR_TRAP1|DR_TRAP2|DR_TRAP3)) { + if (!tsk->thread.debugreg7) + goto clear_dr7; + } + +#ifdef CONFIG_X86_32 + if (regs->flags & X86_VM_MASK) + goto debug_vm86; +#endif + + /* Save debug status register where ptrace can see it */ + tsk->thread.debugreg6 = condition; + + /* + * Single-stepping through TF: make sure we ignore any events in + * kernel space (but re-enable TF when returning to user mode). + */ + if (condition & DR_STEP) { + if (!user_mode(regs)) + goto clear_TF_reenable; + } + + si_code = get_si_code(condition); + /* Ok, finally something we can handle */ + send_sigtrap(tsk, regs, error_code, si_code); + + /* + * Disable additional traps. They'll be re-enabled when + * the signal is delivered. + */ +clear_dr7: + set_debugreg(0, 7); + preempt_conditional_cli(regs); + return; + +#ifdef CONFIG_X86_32 +debug_vm86: + handle_vm86_trap((struct kernel_vm86_regs *) regs, error_code, 1); + preempt_conditional_cli(regs); + return; +#endif + +clear_TF_reenable: + set_tsk_thread_flag(tsk, TIF_SINGLESTEP); + regs->flags &= ~X86_EFLAGS_TF; + preempt_conditional_cli(regs); + return; +} + +#ifdef CONFIG_X86_64 +static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr) +{ + if (fixup_exception(regs)) + return 1; + + notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE); + /* Illegal floating point operation in the kernel */ + current->thread.trap_no = trapnr; + die(str, regs, 0); + return 0; +} +#endif + +/* + * Note that we play around with the 'TS' bit in an attempt to get + * the correct behaviour even in the presence of the asynchronous + * IRQ13 behaviour + */ +void math_error(void __user *ip) +{ + struct task_struct *task; + siginfo_t info; + unsigned short cwd, swd; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 16; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = ip; + /* + * (~cwd & swd) will mask out exceptions that are not set to unmasked + * status. 0x3f is the exception bits in these regs, 0x200 is the + * C1 reg you need in case of a stack fault, 0x040 is the stack + * fault bit. We should only be taking one exception at a time, + * so if this combination doesn't produce any single exception, + * then we have a bad program that isn't synchronizing its FPU usage + * and it will suffer the consequences since we won't be able to + * fully reproduce the context of the exception + */ + cwd = get_fpu_cwd(task); + swd = get_fpu_swd(task); + switch (swd & ~cwd & 0x3f) { + case 0x000: /* No unmasked exception */ +#ifdef CONFIG_X86_32 + return; +#endif + default: /* Multiple exceptions */ + break; + case 0x001: /* Invalid Op */ + /* + * swd & 0x240 == 0x040: Stack Underflow + * swd & 0x240 == 0x240: Stack Overflow + * User must clear the SF bit (0x40) if set + */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code) +{ + conditional_sti(regs); + +#ifdef CONFIG_X86_32 + ignore_fpu_irq = 1; +#else + if (!user_mode(regs) && + kernel_math_error(regs, "kernel x87 math error", 16)) + return; +#endif + + math_error((void __user *)regs->ip); +} + +static void simd_math_error(void __user *ip) +{ + struct task_struct *task; + siginfo_t info; + unsigned short mxcsr; + + /* + * Save the info for the exception handler and clear the error. + */ + task = current; + save_init_fpu(task); + task->thread.trap_no = 19; + task->thread.error_code = 0; + info.si_signo = SIGFPE; + info.si_errno = 0; + info.si_code = __SI_FAULT; + info.si_addr = ip; + /* + * The SIMD FPU exceptions are handled a little differently, as there + * is only a single status/control register. Thus, to determine which + * unmasked exception was caught we must mask the exception mask bits + * at 0x1f80, and then use these to mask the exception bits at 0x3f. + */ + mxcsr = get_fpu_mxcsr(task); + switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) { + case 0x000: + default: + break; + case 0x001: /* Invalid Op */ + info.si_code = FPE_FLTINV; + break; + case 0x002: /* Denormalize */ + case 0x010: /* Underflow */ + info.si_code = FPE_FLTUND; + break; + case 0x004: /* Zero Divide */ + info.si_code = FPE_FLTDIV; + break; + case 0x008: /* Overflow */ + info.si_code = FPE_FLTOVF; + break; + case 0x020: /* Precision */ + info.si_code = FPE_FLTRES; + break; + } + force_sig_info(SIGFPE, &info, task); +} + +dotraplinkage void +do_simd_coprocessor_error(struct pt_regs *regs, long error_code) +{ + conditional_sti(regs); + +#ifdef CONFIG_X86_32 + if (cpu_has_xmm) { + /* Handle SIMD FPU exceptions on PIII+ processors. */ + ignore_fpu_irq = 1; + simd_math_error((void __user *)regs->ip); + return; + } + /* + * Handle strange cache flush from user space exception + * in all other cases. This is undocumented behaviour. + */ + if (regs->flags & X86_VM_MASK) { + handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code); + return; + } + current->thread.trap_no = 19; + current->thread.error_code = error_code; + die_if_kernel("cache flush denied", regs, error_code); + force_sig(SIGSEGV, current); +#else + if (!user_mode(regs) && + kernel_math_error(regs, "kernel simd math error", 19)) + return; + simd_math_error((void __user *)regs->ip); +#endif +} + +dotraplinkage void +do_spurious_interrupt_bug(struct pt_regs *regs, long error_code) +{ + conditional_sti(regs); +#if 0 + /* No need to warn about this any longer. */ + printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n"); +#endif +} + +#ifdef CONFIG_X86_32 +unsigned long patch_espfix_desc(unsigned long uesp, unsigned long kesp) +{ + struct desc_struct *gdt = get_cpu_gdt_table(smp_processor_id()); + unsigned long base = (kesp - uesp) & -THREAD_SIZE; + unsigned long new_kesp = kesp - base; + unsigned long lim_pages = (new_kesp | (THREAD_SIZE - 1)) >> PAGE_SHIFT; + __u64 desc = *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS]; + + /* Set up base for espfix segment */ + desc &= 0x00f0ff0000000000ULL; + desc |= ((((__u64)base) << 16) & 0x000000ffffff0000ULL) | + ((((__u64)base) << 32) & 0xff00000000000000ULL) | + ((((__u64)lim_pages) << 32) & 0x000f000000000000ULL) | + (lim_pages & 0xffff); + *(__u64 *)&gdt[GDT_ENTRY_ESPFIX_SS] = desc; + + return new_kesp; +} +#else +asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void) +{ +} + +asmlinkage void __attribute__((weak)) mce_threshold_interrupt(void) +{ +} +#endif + +/* + * 'math_state_restore()' saves the current math information in the + * old math state array, and gets the new ones from the current task + * + * Careful.. There are problems with IBM-designed IRQ13 behaviour. + * Don't touch unless you *really* know how it works. + * + * Must be called with kernel preemption disabled (in this case, + * local interrupts are disabled at the call-site in entry.S). + */ +asmlinkage void math_state_restore(void) +{ + struct thread_info *thread = current_thread_info(); + struct task_struct *tsk = thread->task; + + if (!tsk_used_math(tsk)) { + local_irq_enable(); + /* + * does a slab alloc which can sleep + */ + if (init_fpu(tsk)) { + /* + * ran out of memory! + */ + do_group_exit(SIGKILL); + return; + } + local_irq_disable(); + } + + clts(); /* Allow maths ops (or we recurse) */ +#ifdef CONFIG_X86_32 + restore_fpu(tsk); +#else + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(tsk))) { + stts(); + force_sig(SIGSEGV, tsk); + return; + } +#endif + thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */ + tsk->fpu_counter++; +} +EXPORT_SYMBOL_GPL(math_state_restore); + +#ifndef CONFIG_MATH_EMULATION +asmlinkage void math_emulate(long arg) +{ + printk(KERN_EMERG + "math-emulation not enabled and no coprocessor found.\n"); + printk(KERN_EMERG "killing %s.\n", current->comm); + force_sig(SIGFPE, current); + schedule(); +} +#endif /* CONFIG_MATH_EMULATION */ + +dotraplinkage void __kprobes +do_device_not_available(struct pt_regs *regs, long error) +{ +#ifdef CONFIG_X86_32 + if (read_cr0() & X86_CR0_EM) { + conditional_sti(regs); + math_emulate(0); + } else { + math_state_restore(); /* interrupts still off */ + conditional_sti(regs); + } +#else + math_state_restore(); +#endif +} + +#ifdef CONFIG_X86_32 +dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code) +{ + siginfo_t info; + local_irq_enable(); + + info.si_signo = SIGILL; + info.si_errno = 0; + info.si_code = ILL_BADSTK; + info.si_addr = 0; + if (notify_die(DIE_TRAP, "iret exception", + regs, error_code, 32, SIGILL) == NOTIFY_STOP) + return; + do_trap(32, SIGILL, "iret exception", regs, error_code, &info); +} +#endif + +void __init trap_init(void) +{ +#ifdef CONFIG_X86_32 + int i; +#endif + +#ifdef CONFIG_EISA + void __iomem *p = early_ioremap(0x0FFFD9, 4); + + if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24)) + EISA_bus = 1; + early_iounmap(p, 4); +#endif + + set_intr_gate(0, ÷_error); + set_intr_gate_ist(1, &debug, DEBUG_STACK); + set_intr_gate_ist(2, &nmi, NMI_STACK); + /* int3 can be called from all */ + set_system_intr_gate_ist(3, &int3, DEBUG_STACK); + /* int4 can be called from all */ + set_system_intr_gate(4, &overflow); + set_intr_gate(5, &bounds); + set_intr_gate(6, &invalid_op); + set_intr_gate(7, &device_not_available); +#ifdef CONFIG_X86_32 + set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS); +#else + set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK); +#endif + set_intr_gate(9, &coprocessor_segment_overrun); + set_intr_gate(10, &invalid_TSS); + set_intr_gate(11, &segment_not_present); + set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK); + set_intr_gate(13, &general_protection); + set_intr_gate(14, &page_fault); + set_intr_gate(15, &spurious_interrupt_bug); + set_intr_gate(16, &coprocessor_error); + set_intr_gate(17, &alignment_check); +#ifdef CONFIG_X86_MCE + set_intr_gate_ist(18, &machine_check, MCE_STACK); +#endif + set_intr_gate(19, &simd_coprocessor_error); + +#ifdef CONFIG_IA32_EMULATION + set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall); +#endif + +#ifdef CONFIG_X86_32 + if (cpu_has_fxsr) { + printk(KERN_INFO "Enabling fast FPU save and restore... "); + set_in_cr4(X86_CR4_OSFXSR); + printk("done.\n"); + } + if (cpu_has_xmm) { + printk(KERN_INFO + "Enabling unmasked SIMD FPU exception support... "); + set_in_cr4(X86_CR4_OSXMMEXCPT); + printk("done.\n"); + } + + set_system_trap_gate(SYSCALL_VECTOR, &system_call); + + /* Reserve all the builtin and the syscall vector: */ + for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++) + set_bit(i, used_vectors); + + set_bit(SYSCALL_VECTOR, used_vectors); +#endif + /* + * Should be a barrier for any external CPU state: + */ + cpu_init(); + +#ifdef CONFIG_X86_32 + trap_init_hook(); +#endif +} |