diff options
Diffstat (limited to 'arch/x86/kernel/mmconf-fam10h_64.c')
| -rw-r--r-- | arch/x86/kernel/mmconf-fam10h_64.c | 243 |
1 files changed, 243 insertions, 0 deletions
diff --git a/arch/x86/kernel/mmconf-fam10h_64.c b/arch/x86/kernel/mmconf-fam10h_64.c new file mode 100644 index 00000000000..edc5fbfe85c --- /dev/null +++ b/arch/x86/kernel/mmconf-fam10h_64.c @@ -0,0 +1,243 @@ +/* + * AMD Family 10h mmconfig enablement + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/dmi.h> +#include <asm/pci-direct.h> +#include <linux/sort.h> +#include <asm/io.h> +#include <asm/msr.h> +#include <asm/acpi.h> + +#include "../pci/pci.h" + +struct pci_hostbridge_probe { + u32 bus; + u32 slot; + u32 vendor; + u32 device; +}; + +static u64 __cpuinitdata fam10h_pci_mmconf_base; +static int __cpuinitdata fam10h_pci_mmconf_base_status; + +static struct pci_hostbridge_probe pci_probes[] __cpuinitdata = { + { 0, 0x18, PCI_VENDOR_ID_AMD, 0x1200 }, + { 0xff, 0, PCI_VENDOR_ID_AMD, 0x1200 }, +}; + +struct range { + u64 start; + u64 end; +}; + +static int __cpuinit cmp_range(const void *x1, const void *x2) +{ + const struct range *r1 = x1; + const struct range *r2 = x2; + int start1, start2; + + start1 = r1->start >> 32; + start2 = r2->start >> 32; + + return start1 - start2; +} + +/*[47:0] */ +/* need to avoid (0xfd<<32) and (0xfe<<32), ht used space */ +#define FAM10H_PCI_MMCONF_BASE (0xfcULL<<32) +#define BASE_VALID(b) ((b != (0xfdULL << 32)) && (b != (0xfeULL << 32))) +static void __cpuinit get_fam10h_pci_mmconf_base(void) +{ + int i; + unsigned bus; + unsigned slot; + int found; + + u64 val; + u32 address; + u64 tom2; + u64 base = FAM10H_PCI_MMCONF_BASE; + + int hi_mmio_num; + struct range range[8]; + + /* only try to get setting from BSP */ + /* -1 or 1 */ + if (fam10h_pci_mmconf_base_status) + return; + + if (!early_pci_allowed()) + goto fail; + + found = 0; + for (i = 0; i < ARRAY_SIZE(pci_probes); i++) { + u32 id; + u16 device; + u16 vendor; + + bus = pci_probes[i].bus; + slot = pci_probes[i].slot; + id = read_pci_config(bus, slot, 0, PCI_VENDOR_ID); + + vendor = id & 0xffff; + device = (id>>16) & 0xffff; + if (pci_probes[i].vendor == vendor && + pci_probes[i].device == device) { + found = 1; + break; + } + } + + if (!found) + goto fail; + + /* SYS_CFG */ + address = MSR_K8_SYSCFG; + rdmsrl(address, val); + + /* TOP_MEM2 is not enabled? */ + if (!(val & (1<<21))) { + tom2 = 0; + } else { + /* TOP_MEM2 */ + address = MSR_K8_TOP_MEM2; + rdmsrl(address, val); + tom2 = val & (0xffffULL<<32); + } + + if (base <= tom2) + base = tom2 + (1ULL<<32); + + /* + * need to check if the range is in the high mmio range that is + * above 4G + */ + hi_mmio_num = 0; + for (i = 0; i < 8; i++) { + u32 reg; + u64 start; + u64 end; + reg = read_pci_config(bus, slot, 1, 0x80 + (i << 3)); + if (!(reg & 3)) + continue; + + start = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + reg = read_pci_config(bus, slot, 1, 0x84 + (i << 3)); + end = (((u64)reg) << 8) & (0xffULL << 32); /* 39:16 on 31:8*/ + + if (!end) + continue; + + range[hi_mmio_num].start = start; + range[hi_mmio_num].end = end; + hi_mmio_num++; + } + + if (!hi_mmio_num) + goto out; + + /* sort the range */ + sort(range, hi_mmio_num, sizeof(struct range), cmp_range, NULL); + + if (range[hi_mmio_num - 1].end < base) + goto out; + if (range[0].start > base) + goto out; + + /* need to find one window */ + base = range[0].start - (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + base = range[hi_mmio_num - 1].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + /* need to find window between ranges */ + if (hi_mmio_num > 1) + for (i = 0; i < hi_mmio_num - 1; i++) { + if (range[i + 1].start > (range[i].end + (1ULL << 32))) { + base = range[i].end + (1ULL << 32); + if ((base > tom2) && BASE_VALID(base)) + goto out; + } + } + +fail: + fam10h_pci_mmconf_base_status = -1; + return; +out: + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; +} + +void __cpuinit fam10h_check_enable_mmcfg(void) +{ + u64 val; + u32 address; + + if (!(pci_probe & PCI_CHECK_ENABLE_AMD_MMCONF)) + return; + + address = MSR_FAM10H_MMIO_CONF_BASE; + rdmsrl(address, val); + + /* try to make sure that AP's setting is identical to BSP setting */ + if (val & FAM10H_MMIO_CONF_ENABLE) { + unsigned busnbits; + busnbits = (val >> FAM10H_MMIO_CONF_BUSRANGE_SHIFT) & + FAM10H_MMIO_CONF_BUSRANGE_MASK; + + /* only trust the one handle 256 buses, if acpi=off */ + if (!acpi_pci_disabled || busnbits >= 8) { + u64 base; + base = val & (0xffffULL << 32); + if (fam10h_pci_mmconf_base_status <= 0) { + fam10h_pci_mmconf_base = base; + fam10h_pci_mmconf_base_status = 1; + return; + } else if (fam10h_pci_mmconf_base == base) + return; + } + } + + /* + * if it is not enabled, try to enable it and assume only one segment + * with 256 buses + */ + get_fam10h_pci_mmconf_base(); + if (fam10h_pci_mmconf_base_status <= 0) + return; + + printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n"); + val &= ~((FAM10H_MMIO_CONF_BASE_MASK<<FAM10H_MMIO_CONF_BASE_SHIFT) | + (FAM10H_MMIO_CONF_BUSRANGE_MASK<<FAM10H_MMIO_CONF_BUSRANGE_SHIFT)); + val |= fam10h_pci_mmconf_base | (8 << FAM10H_MMIO_CONF_BUSRANGE_SHIFT) | + FAM10H_MMIO_CONF_ENABLE; + wrmsrl(address, val); +} + +static int __devinit set_check_enable_amd_mmconf(const struct dmi_system_id *d) +{ + pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF; + return 0; +} + +static struct dmi_system_id __devinitdata mmconf_dmi_table[] = { + { + .callback = set_check_enable_amd_mmconf, + .ident = "Sun Microsystems Machine", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sun Microsystems"), + }, + }, + {} +}; + +void __init check_enable_amd_mmconf_dmi(void) +{ + dmi_check_system(mmconf_dmi_table); +} |