diff options
Diffstat (limited to 'arch/x86/kernel/apic_64.c')
| -rw-r--r-- | arch/x86/kernel/apic_64.c | 626 |
1 files changed, 540 insertions, 86 deletions
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 446c062e831..53898b65a6a 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -27,6 +27,7 @@ #include <linux/clockchips.h> #include <linux/acpi_pmtmr.h> #include <linux/module.h> +#include <linux/dmar.h> #include <asm/atomic.h> #include <asm/smp.h> @@ -39,13 +40,20 @@ #include <asm/proto.h> #include <asm/timex.h> #include <asm/apic.h> +#include <asm/i8259.h> #include <mach_ipi.h> #include <mach_apic.h> +/* Disable local APIC timer from the kernel commandline or via dmi quirk */ static int disable_apic_timer __cpuinitdata; static int apic_calibrate_pmtmr __initdata; int disable_apic; +int disable_x2apic; +int x2apic; + +/* x2apic enabled before OS handover */ +int x2apic_preenabled; /* Local APIC timer works in C2 */ int local_apic_timer_c2_ok; @@ -73,6 +81,9 @@ static void lapic_timer_setup(enum clock_event_mode mode, static void lapic_timer_broadcast(cpumask_t mask); static void apic_pm_activate(void); +/* + * The local apic timer can be used for any function which is CPU local. + */ static struct clock_event_device lapic_clockevent = { .name = "lapic", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT @@ -99,11 +110,15 @@ static inline int lapic_get_version(void) } /* - * Check, if the APIC is integrated or a seperate chip + * Check, if the APIC is integrated or a separate chip */ static inline int lapic_is_integrated(void) { +#ifdef CONFIG_X86_64 return 1; +#else + return APIC_INTEGRATED(lapic_get_version()); +#endif } /* @@ -118,13 +133,18 @@ static int modern_apic(void) return lapic_get_version() >= 0x14; } -void apic_wait_icr_idle(void) +/* + * Paravirt kernels also might be using these below ops. So we still + * use generic apic_read()/apic_write(), which might be pointing to different + * ops in PARAVIRT case. + */ +void xapic_wait_icr_idle(void) { while (apic_read(APIC_ICR) & APIC_ICR_BUSY) cpu_relax(); } -u32 safe_apic_wait_icr_idle(void) +u32 safe_xapic_wait_icr_idle(void) { u32 send_status; int timeout; @@ -140,6 +160,68 @@ u32 safe_apic_wait_icr_idle(void) return send_status; } +void xapic_icr_write(u32 low, u32 id) +{ + apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(id)); + apic_write(APIC_ICR, low); +} + +u64 xapic_icr_read(void) +{ + u32 icr1, icr2; + + icr2 = apic_read(APIC_ICR2); + icr1 = apic_read(APIC_ICR); + + return icr1 | ((u64)icr2 << 32); +} + +static struct apic_ops xapic_ops = { + .read = native_apic_mem_read, + .write = native_apic_mem_write, + .icr_read = xapic_icr_read, + .icr_write = xapic_icr_write, + .wait_icr_idle = xapic_wait_icr_idle, + .safe_wait_icr_idle = safe_xapic_wait_icr_idle, +}; + +struct apic_ops __read_mostly *apic_ops = &xapic_ops; +EXPORT_SYMBOL_GPL(apic_ops); + +static void x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return; +} + +static u32 safe_x2apic_wait_icr_idle(void) +{ + /* no need to wait for icr idle in x2apic */ + return 0; +} + +void x2apic_icr_write(u32 low, u32 id) +{ + wrmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), ((__u64) id) << 32 | low); +} + +u64 x2apic_icr_read(void) +{ + unsigned long val; + + rdmsrl(APIC_BASE_MSR + (APIC_ICR >> 4), val); + return val; +} + +static struct apic_ops x2apic_ops = { + .read = native_apic_msr_read, + .write = native_apic_msr_write, + .icr_read = x2apic_icr_read, + .icr_write = x2apic_icr_write, + .wait_icr_idle = x2apic_wait_icr_idle, + .safe_wait_icr_idle = safe_x2apic_wait_icr_idle, +}; + /** * enable_NMI_through_LVT0 - enable NMI through local vector table 0 */ @@ -149,6 +231,11 @@ void __cpuinit enable_NMI_through_LVT0(void) /* unmask and set to NMI */ v = APIC_DM_NMI; + + /* Level triggered for 82489DX (32bit mode) */ + if (!lapic_is_integrated()) + v |= APIC_LVT_LEVEL_TRIGGER; + apic_write(APIC_LVT0, v); } @@ -157,14 +244,28 @@ void __cpuinit enable_NMI_through_LVT0(void) */ int lapic_get_maxlvt(void) { - unsigned int v, maxlvt; + unsigned int v; v = apic_read(APIC_LVR); - maxlvt = GET_APIC_MAXLVT(v); - return maxlvt; + /* + * - we always have APIC integrated on 64bit mode + * - 82489DXs do not report # of LVT entries + */ + return APIC_INTEGRATED(GET_APIC_VERSION(v)) ? GET_APIC_MAXLVT(v) : 2; } /* + * Local APIC timer + */ + +/* Clock divisor */ +#ifdef CONFG_X86_64 +#define APIC_DIVISOR 1 +#else +#define APIC_DIVISOR 16 +#endif + +/* * This function sets up the local APIC timer, with a timeout of * 'clocks' APIC bus clock. During calibration we actually call * this function twice on the boot CPU, once with a bogus timeout @@ -174,7 +275,6 @@ int lapic_get_maxlvt(void) * We do reads before writes even if unnecessary, to get around the * P5 APIC double write bug. */ - static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) { unsigned int lvtt_value, tmp_value; @@ -182,6 +282,9 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) lvtt_value = LOCAL_TIMER_VECTOR; if (!oneshot) lvtt_value |= APIC_LVT_TIMER_PERIODIC; + if (!lapic_is_integrated()) + lvtt_value |= SET_APIC_TIMER_BASE(APIC_TIMER_BASE_DIV); + if (!irqen) lvtt_value |= APIC_LVT_MASKED; @@ -191,12 +294,12 @@ static void __setup_APIC_LVTT(unsigned int clocks, int oneshot, int irqen) * Divide PICLK by 16 */ tmp_value = apic_read(APIC_TDCR); - apic_write(APIC_TDCR, (tmp_value - & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) - | APIC_TDR_DIV_16); + apic_write(APIC_TDCR, + (tmp_value & ~(APIC_TDR_DIV_1 | APIC_TDR_DIV_TMBASE)) | + APIC_TDR_DIV_16); if (!oneshot) - apic_write(APIC_TMICT, clocks); + apic_write(APIC_TMICT, clocks / APIC_DIVISOR); } /* @@ -366,7 +469,7 @@ static int __init calibrate_APIC_clock(void) lapic_clockevent.min_delta_ns = clockevent_delta2ns(0xF, &lapic_clockevent); - calibration_result = result / HZ; + calibration_result = (result * APIC_DIVISOR) / HZ; /* * Do a sanity check on the APIC calibration result @@ -388,10 +491,10 @@ static int __init calibrate_APIC_clock(void) void __init setup_boot_APIC_clock(void) { /* - * The local apic timer can be disabled via the kernel commandline. - * Register the lapic timer as a dummy clock event source on SMP - * systems, so the broadcast mechanism is used. On UP systems simply - * ignore it. + * The local apic timer can be disabled via the kernel + * commandline or from the CPU detection code. Register the lapic + * timer as a dummy clock event source on SMP systems, so the + * broadcast mechanism is used. On UP systems simply ignore it. */ if (disable_apic_timer) { printk(KERN_INFO "Disabling APIC timer\n"); @@ -403,7 +506,9 @@ void __init setup_boot_APIC_clock(void) return; } - printk(KERN_INFO "Using local APIC timer interrupts.\n"); + apic_printk(APIC_VERBOSE, "Using local APIC timer interrupts.\n" + "calibrating APIC timer ...\n"); + if (calibrate_APIC_clock()) { /* No broadcast on UP ! */ if (num_possible_cpus() > 1) @@ -422,6 +527,7 @@ void __init setup_boot_APIC_clock(void) printk(KERN_WARNING "APIC timer registered as dummy," " due to nmi_watchdog=%d!\n", nmi_watchdog); + /* Setup the lapic or request the broadcast */ setup_APIC_timer(); } @@ -460,7 +566,11 @@ static void local_apic_timer_interrupt(void) /* * the NMI deadlock-detector uses this. */ +#ifdef CONFIG_X86_64 add_pda(apic_timer_irqs, 1); +#else + per_cpu(irq_stat, cpu).apic_timer_irqs++; +#endif evt->event_handler(evt); } @@ -491,6 +601,7 @@ void smp_apic_timer_interrupt(struct pt_regs *regs) irq_enter(); local_apic_timer_interrupt(); irq_exit(); + set_irq_regs(old_regs); } @@ -544,6 +655,13 @@ void clear_local_APIC(void) apic_write(APIC_LVTPC, v | APIC_LVT_MASKED); } + /* lets not touch this if we didn't frob it */ +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(X86_MCE_INTEL) + if (maxlvt >= 5) { + v = apic_read(APIC_LVTTHMR); + apic_write(APIC_LVTTHMR, v | APIC_LVT_MASKED); + } +#endif /* * Clean APIC state for other OSs: */ @@ -554,8 +672,14 @@ void clear_local_APIC(void) apic_write(APIC_LVTERR, APIC_LVT_MASKED); if (maxlvt >= 4) apic_write(APIC_LVTPC, APIC_LVT_MASKED); - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); + + /* Integrated APIC (!82489DX) ? */ + if (lapic_is_integrated()) { + if (maxlvt > 3) + /* Clear ESR due to Pentium errata 3AP and 11AP */ + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } } /** @@ -574,8 +698,28 @@ void disable_local_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_SPIV_APIC_ENABLED; apic_write(APIC_SPIV, value); + +#ifdef CONFIG_X86_32 + /* + * When LAPIC was disabled by the BIOS and enabled by the kernel, + * restore the disabled state. + */ + if (enabled_via_apicbase) { + unsigned int l, h; + + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_ENABLE; + wrmsr(MSR_IA32_APICBASE, l, h); + } +#endif } +/* + * If Linux enabled the LAPIC against the BIOS default disable it down before + * re-entering the BIOS on shutdown. Otherwise the BIOS may get confused and + * not power-off. Additionally clear all LVT entries before disable_local_APIC + * for the case where Linux didn't enable the LAPIC. + */ void lapic_shutdown(void) { unsigned long flags; @@ -585,7 +729,13 @@ void lapic_shutdown(void) local_irq_save(flags); - disable_local_APIC(); +#ifdef CONFIG_X86_32 + if (!enabled_via_apicbase) + clear_local_APIC(); + else +#endif + disable_local_APIC(); + local_irq_restore(flags); } @@ -629,10 +779,10 @@ int __init verify_local_APIC(void) /* * The ID register is read/write in a real APIC. */ - reg0 = read_apic_id(); + reg0 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg0); apic_write(APIC_ID, reg0 ^ APIC_ID_MASK); - reg1 = read_apic_id(); + reg1 = apic_read(APIC_ID); apic_printk(APIC_DEBUG, "Getting ID: %x\n", reg1); apic_write(APIC_ID, reg0); if (reg1 != (reg0 ^ APIC_ID_MASK)) @@ -656,8 +806,11 @@ int __init verify_local_APIC(void) */ void __init sync_Arb_IDs(void) { - /* Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 */ - if (modern_apic()) + /* + * Unsupported on P4 - see Intel Dev. Manual Vol. 3, Ch. 8.6.1 And not + * needed on AMD. + */ + if (modern_apic() || boot_cpu_data.x86_vendor == X86_VENDOR_AMD) return; /* @@ -666,8 +819,8 @@ void __init sync_Arb_IDs(void) apic_wait_icr_idle(); apic_printk(APIC_DEBUG, "Synchronizing Arb IDs.\n"); - apic_write(APIC_ICR, APIC_DEST_ALLINC | APIC_INT_LEVELTRIG - | APIC_DM_INIT); + apic_write(APIC_ICR, APIC_DEST_ALLINC | + APIC_INT_LEVELTRIG | APIC_DM_INIT); } /* @@ -684,8 +837,6 @@ void __init init_bsp_APIC(void) if (smp_found_config || !cpu_has_apic) return; - value = apic_read(APIC_LVR); - /* * Do not trust the local APIC being empty at bootup. */ @@ -697,7 +848,15 @@ void __init init_bsp_APIC(void) value = apic_read(APIC_SPIV); value &= ~APIC_VECTOR_MASK; value |= APIC_SPIV_APIC_ENABLED; - value |= APIC_SPIV_FOCUS_DISABLED; + +#ifdef CONFIG_X86_32 + /* This bit is reserved on P4/Xeon and should be cleared */ + if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && + (boot_cpu_data.x86 == 15)) + value &= ~APIC_SPIV_FOCUS_DISABLED; + else +#endif + value |= APIC_SPIV_FOCUS_DISABLED; value |= SPURIOUS_APIC_VECTOR; apic_write(APIC_SPIV, value); @@ -706,9 +865,50 @@ void __init init_bsp_APIC(void) */ apic_write(APIC_LVT0, APIC_DM_EXTINT); value = APIC_DM_NMI; + if (!lapic_is_integrated()) /* 82489DX */ + value |= APIC_LVT_LEVEL_TRIGGER; apic_write(APIC_LVT1, value); } +static void __cpuinit lapic_setup_esr(void) +{ + unsigned long oldvalue, value, maxlvt; + if (lapic_is_integrated() && !esr_disable) { + if (esr_disable) { + /* + * Something untraceable is creating bad interrupts on + * secondary quads ... for the moment, just leave the + * ESR disabled - we can't do anything useful with the + * errors anyway - mbligh + */ + printk(KERN_INFO "Leaving ESR disabled.\n"); + return; + } + /* !82489DX */ + maxlvt = lapic_get_maxlvt(); + if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ + apic_write(APIC_ESR, 0); + oldvalue = apic_read(APIC_ESR); + + /* enables sending errors */ + value = ERROR_APIC_VECTOR; + apic_write(APIC_LVTERR, value); + /* + * spec says clear errors after enabling vector. + */ + if (maxlvt > 3) + apic_write(APIC_ESR, 0); + value = apic_read(APIC_ESR); + if (value != oldvalue) + apic_printk(APIC_VERBOSE, "ESR value before enabling " + "vector: 0x%08lx after: 0x%08lx\n", + oldvalue, value); + } else { + printk(KERN_INFO "No ESR for 82489DX.\n"); + } +} + + /** * setup_local_APIC - setup the local APIC */ @@ -814,25 +1014,143 @@ void __cpuinit setup_local_APIC(void) preempt_enable(); } -static void __cpuinit lapic_setup_esr(void) -{ - unsigned maxlvt = lapic_get_maxlvt(); - - apic_write(APIC_LVTERR, ERROR_APIC_VECTOR); - /* - * spec says clear errors after enabling vector. - */ - if (maxlvt > 3) - apic_write(APIC_ESR, 0); -} - void __cpuinit end_local_APIC_setup(void) { lapic_setup_esr(); + +#ifdef CONFIG_X86_32 + { + unsigned int value; + /* Disable the local apic timer */ + value = apic_read(APIC_LVTT); + value |= (APIC_LVT_MASKED | LOCAL_TIMER_VECTOR); + apic_write(APIC_LVTT, value); + } +#endif + setup_apic_nmi_watchdog(NULL); apic_pm_activate(); } +void check_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + + if (msr & X2APIC_ENABLE) { + printk("x2apic enabled by BIOS, switching to x2apic ops\n"); + x2apic_preenabled = x2apic = 1; + apic_ops = &x2apic_ops; + } +} + +void enable_x2apic(void) +{ + int msr, msr2; + + rdmsr(MSR_IA32_APICBASE, msr, msr2); + if (!(msr & X2APIC_ENABLE)) { + printk("Enabling x2apic\n"); + wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0); + } +} + +void enable_IR_x2apic(void) +{ +#ifdef CONFIG_INTR_REMAP + int ret; + unsigned long flags; + + if (!cpu_has_x2apic) + return; + + if (!x2apic_preenabled && disable_x2apic) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of nox2apic\n"); + return; + } + + if (x2apic_preenabled && disable_x2apic) + panic("Bios already enabled x2apic, can't enforce nox2apic"); + + if (!x2apic_preenabled && skip_ioapic_setup) { + printk(KERN_INFO + "Skipped enabling x2apic and Interrupt-remapping " + "because of skipping io-apic setup\n"); + return; + } + + ret = dmar_table_init(); + if (ret) { + printk(KERN_INFO + "dmar_table_init() failed with %d:\n", ret); + + if (x2apic_preenabled) + panic("x2apic enabled by bios. But IR enabling failed"); + else + printk(KERN_INFO + "Not enabling x2apic,Intr-remapping\n"); + return; + } + + local_irq_save(flags); + mask_8259A(); + save_mask_IO_APIC_setup(); + + ret = enable_intr_remapping(1); + + if (ret && x2apic_preenabled) { + local_irq_restore(flags); + panic("x2apic enabled by bios. But IR enabling failed"); + } + + if (ret) + goto end; + + if (!x2apic) { + x2apic = 1; + apic_ops = &x2apic_ops; + enable_x2apic(); + } +end: + if (ret) + /* + * IR enabling failed + */ + restore_IO_APIC_setup(); + else + reinit_intr_remapped_IO_APIC(x2apic_preenabled); + + unmask_8259A(); + local_irq_restore(flags); + + if (!ret) { + if (!x2apic_preenabled) + printk(KERN_INFO + "Enabled x2apic and interrupt-remapping\n"); + else + printk(KERN_INFO + "Enabled Interrupt-remapping\n"); + } else + printk(KERN_ERR + "Failed to enable Interrupt-remapping and x2apic\n"); +#else + if (!cpu_has_x2apic) + return; + + if (x2apic_preenabled) + panic("x2apic enabled prior OS handover," + " enable CONFIG_INTR_REMAP"); + + printk(KERN_INFO "Enable CONFIG_INTR_REMAP for enabling intr-remapping " + " and x2apic\n"); +#endif + + return; +} + /* * Detect and enable local APICs on non-SMP boards. * Original code written by Keir Fraser. @@ -872,7 +1190,7 @@ void __init early_init_lapic_mapping(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /** @@ -880,6 +1198,11 @@ void __init early_init_lapic_mapping(void) */ void __init init_apic_mappings(void) { + if (x2apic) { + boot_cpu_physical_apicid = read_apic_id(); + return; + } + /* * If no local APIC can be found then set up a fake all * zeroes page to simulate the local APIC and another @@ -899,13 +1222,15 @@ void __init init_apic_mappings(void) * Fetch the APIC ID of the BSP in case we have a * default configuration (or the MP table is broken). */ - boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); + boot_cpu_physical_apicid = read_apic_id(); } /* * This initializes the IO-APIC and APIC hardware if this is * a UP kernel. */ +int apic_version[MAX_APICS]; + int __init APIC_init_uniprocessor(void) { if (disable_apic) { @@ -918,6 +1243,9 @@ int __init APIC_init_uniprocessor(void) return -1; } + enable_IR_x2apic(); + setup_apic_routing(); + verify_local_APIC(); connect_bsp_APIC(); @@ -1004,17 +1332,57 @@ asmlinkage void smp_error_interrupt(void) } /** - * * connect_bsp_APIC - attach the APIC to the interrupt system - * */ + * connect_bsp_APIC - attach the APIC to the interrupt system + */ void __init connect_bsp_APIC(void) { +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Do not trust the local APIC being empty at bootup. + */ + clear_local_APIC(); + /* + * PIC mode, enable APIC mode in the IMCR, i.e. connect BSP's + * local APIC to INT and NMI lines. + */ + apic_printk(APIC_VERBOSE, "leaving PIC mode, " + "enabling APIC mode.\n"); + outb(0x70, 0x22); + outb(0x01, 0x23); + } +#endif enable_apic_mode(); } +/** + * disconnect_bsp_APIC - detach the APIC from the interrupt system + * @virt_wire_setup: indicates, whether virtual wire mode is selected + * + * Virtual wire mode is necessary to deliver legacy interrupts even when the + * APIC is disabled. + */ void disconnect_bsp_APIC(int virt_wire_setup) { + unsigned int value; + +#ifdef CONFIG_X86_32 + if (pic_mode) { + /* + * Put the board back into PIC mode (has an effect only on + * certain older boards). Note that APIC interrupts, including + * IPIs, won't work beyond this point! The only exception are + * INIT IPIs. + */ + apic_printk(APIC_VERBOSE, "disabling APIC mode, " + "entering PIC mode.\n"); + outb(0x70, 0x22); + outb(0x00, 0x23); + return; + } +#endif + /* Go back to Virtual Wire compatibility mode */ - unsigned long value; /* For the spurious interrupt use vector F, and enable it */ value = apic_read(APIC_SPIV); @@ -1040,7 +1408,10 @@ void disconnect_bsp_APIC(int virt_wire_setup) apic_write(APIC_LVT0, APIC_LVT_MASKED); } - /* For LVT1 make it edge triggered, active high, nmi and enabled */ + /* + * For LVT1 make it edge triggered, active high, + * nmi and enabled + */ value = apic_read(APIC_LVT1); value &= ~(APIC_MODE_MASK | APIC_SEND_PENDING | APIC_INPUT_POLARITY | APIC_LVT_REMOTE_IRR | @@ -1055,9 +1426,20 @@ void __cpuinit generic_processor_info(int apicid, int version) int cpu; cpumask_t tmp_map; + /* + * Validate version + */ + if (version == 0x0) { + printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! " + "fixing up to 0x10. (tell your hw vendor)\n", + version); + version = 0x10; + } + apic_version[apicid] = version; + if (num_processors >= NR_CPUS) { printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached." - " Processor ignored.\n", NR_CPUS); + " Processor ignored.\n", NR_CPUS); return; } @@ -1077,6 +1459,29 @@ void __cpuinit generic_processor_info(int apicid, int version) if (apicid > max_physical_apicid) max_physical_apicid = apicid; +#ifdef CONFIG_X86_32 + /* + * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y + * but we need to work other dependencies like SMP_SUSPEND etc + * before this can be done without some confusion. + * if (CPU_HOTPLUG_ENABLED || num_processors > 8) + * - Ashok Raj <ashok.raj@intel.com> + */ + if (max_physical_apicid >= 8) { + switch (boot_cpu_data.x86_vendor) { + case X86_VENDOR_INTEL: + if (!APIC_XAPIC(version)) { + def_to_bigsmp = 0; + break; + } + /* If P4 and above fall through */ + case X86_VENDOR_AMD: + def_to_bigsmp = 1; + } + } +#endif + +#if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) /* are we being called early in kernel startup? */ if (early_per_cpu_ptr(x86_cpu_to_apicid)) { u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); @@ -1088,20 +1493,28 @@ void __cpuinit generic_processor_info(int apicid, int version) per_cpu(x86_cpu_to_apicid, cpu) = apicid; per_cpu(x86_bios_cpu_apicid, cpu) = apicid; } +#endif cpu_set(cpu, cpu_possible_map); cpu_set(cpu, cpu_present_map); } +int hard_smp_processor_id(void) +{ + return read_apic_id(); +} + /* * Power management */ #ifdef CONFIG_PM static struct { - /* 'active' is true if the local APIC was enabled by us and - not the BIOS; this signifies that we are also responsible - for disabling it before entering apm/acpi suspend */ + /* + * 'active' is true if the local APIC was enabled by us and + * not the BIOS; this signifies that we are also responsible + * for disabling it before entering apm/acpi suspend + */ int active; /* r/w apic fields */ unsigned int apic_id; @@ -1129,7 +1542,7 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) maxlvt = lapic_get_maxlvt(); - apic_pm_state.apic_id = read_apic_id(); + apic_pm_state.apic_id = apic_read(APIC_ID); apic_pm_state.apic_taskpri = apic_read(APIC_TASKPRI); apic_pm_state.apic_ldr = apic_read(APIC_LDR); apic_pm_state.apic_dfr = apic_read(APIC_DFR); @@ -1142,10 +1555,11 @@ static int lapic_suspend(struct sys_device *dev, pm_message_t state) apic_pm_state.apic_lvterr = apic_read(APIC_LVTERR); apic_pm_state.apic_tmict = apic_read(APIC_TMICT); apic_pm_state.apic_tdcr = apic_read(APIC_TDCR); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_pm_state.apic_thmr = apic_read(APIC_LVTTHMR); #endif + local_irq_save(flags); disable_local_APIC(); local_irq_restore(flags); @@ -1164,10 +1578,25 @@ static int lapic_resume(struct sys_device *dev) maxlvt = lapic_get_maxlvt(); local_irq_save(flags); - rdmsr(MSR_IA32_APICBASE, l, h); - l &= ~MSR_IA32_APICBASE_BASE; - l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; - wrmsr(MSR_IA32_APICBASE, l, h); + +#ifdef CONFIG_X86_64 + if (x2apic) + enable_x2apic(); + else +#endif + { + /* + * Make sure the APICBASE points to the right address + * + * FIXME! This will be wrong if we ever support suspend on + * SMP! We'll need to do this as part of the CPU restore! + */ + rdmsr(MSR_IA32_APICBASE, l, h); + l &= ~MSR_IA32_APICBASE_BASE; + l |= MSR_IA32_APICBASE_ENABLE | mp_lapic_addr; + wrmsr(MSR_IA32_APICBASE, l, h); + } + apic_write(APIC_LVTERR, ERROR_APIC_VECTOR | APIC_LVT_MASKED); apic_write(APIC_ID, apic_pm_state.apic_id); apic_write(APIC_DFR, apic_pm_state.apic_dfr); @@ -1176,7 +1605,7 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_SPIV, apic_pm_state.apic_spiv); apic_write(APIC_LVT0, apic_pm_state.apic_lvt0); apic_write(APIC_LVT1, apic_pm_state.apic_lvt1); -#ifdef CONFIG_X86_MCE_INTEL +#if defined(CONFIG_X86_MCE_P4THERMAL) || defined(CONFIG_X86_MCE_INTEL) if (maxlvt >= 5) apic_write(APIC_LVTTHMR, apic_pm_state.apic_thmr); #endif @@ -1190,10 +1619,17 @@ static int lapic_resume(struct sys_device *dev) apic_write(APIC_LVTERR, apic_pm_state.apic_lvterr); apic_write(APIC_ESR, 0); apic_read(APIC_ESR); + local_irq_restore(flags); + return 0; } +/* + * This device has no shutdown method - fully functioning local APICs + * are needed on every CPU up until machine_halt/restart/poweroff. + */ + static struct sysdev_class lapic_sysclass = { .name = "lapic", .resume = lapic_resume, @@ -1307,31 +1743,19 @@ __cpuinit int apic_is_clustered_box(void) return (clusters > 2); } -/* - * APIC command line parameters - */ -static int __init apic_set_verbosity(char *str) +static __init int setup_nox2apic(char *str) { - if (str == NULL) { - skip_ioapic_setup = 0; - ioapic_force = 1; - return 0; - } - if (strcmp("debug", str) == 0) - apic_verbosity = APIC_DEBUG; - else if (strcmp("verbose", str) == 0) - apic_verbosity = APIC_VERBOSE; - else { - printk(KERN_WARNING "APIC Verbosity level %s not recognised" - " use apic=verbose or apic=debug\n", str); - return -EINVAL; - } - + disable_x2apic = 1; + clear_cpu_cap(&boot_cpu_data, X86_FEATURE_X2APIC); return 0; } -early_param("apic", apic_set_verbosity); +early_param("nox2apic", setup_nox2apic); + -static __init int setup_disableapic(char *str) +/* + * APIC command line parameters + */ +static int __init setup_disableapic(char *arg) { disable_apic = 1; setup_clear_cpu_cap(X86_FEATURE_APIC); @@ -1340,9 +1764,9 @@ static __init int setup_disableapic(char *str) early_param("disableapic", setup_disableapic); /* same as disableapic, for compatibility */ -static __init int setup_nolapic(char *str) +static int __init setup_nolapic(char *arg) { - return setup_disableapic(str); + return setup_disableapic(arg); } early_param("nolapic", setup_nolapic); @@ -1353,14 +1777,19 @@ static int __init parse_lapic_timer_c2_ok(char *arg) } early_param("lapic_timer_c2_ok", parse_lapic_timer_c2_ok); -static __init int setup_noapictimer(char *str) +static int __init parse_disable_apic_timer(char *arg) { - if (str[0] != ' ' && str[0] != 0) - return 0; disable_apic_timer = 1; - return 1; + return 0; } -__setup("noapictimer", setup_noapictimer); +early_param("noapictimer", parse_disable_apic_timer); + +static int __init parse_nolapic_timer(char *arg) +{ + disable_apic_timer = 1; + return 0; +} +early_param("nolapic_timer", parse_nolapic_timer); static __init int setup_apicpmtimer(char *s) { @@ -1370,6 +1799,31 @@ static __init int setup_apicpmtimer(char *s) } __setup("apicpmtimer", setup_apicpmtimer); +static int __init apic_set_verbosity(char *arg) +{ + if (!arg) { +#ifdef CONFIG_X86_64 + skip_ioapic_setup = 0; + ioapic_force = 1; + return 0; +#endif + return -EINVAL; + } + + if (strcmp("debug", arg) == 0) + apic_verbosity = APIC_DEBUG; + else if (strcmp("verbose", arg) == 0) + apic_verbosity = APIC_VERBOSE; + else { + printk(KERN_WARNING "APIC Verbosity level %s not recognised" + " use apic=verbose or apic=debug\n", arg); + return -EINVAL; + } + + return 0; +} +early_param("apic", apic_set_verbosity); + static int __init lapic_insert_resource(void) { if (!apic_phys) |