1 files changed, 51 insertions, 66 deletions

diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index a0bf78a0918..b9338b8cf42 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -506,7 +506,7 @@ static void __cpuinit setup_APIC_timer(void)
 {
 	struct clock_event_device *levt = &__get_cpu_var(lapic_events);
 
-	if (cpu_has(__this_cpu_ptr(&cpu_info), X86_FEATURE_ARAT)) {
+	if (this_cpu_has(X86_FEATURE_ARAT)) {
 		lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP;
 		/* Make LAPIC timer preferrable over percpu HPET */
 		lapic_clockevent.rating = 150;
@@ -1238,6 +1238,17 @@ void __cpuinit setup_local_APIC(void)
 	/* always use the value from LDR */
 	early_per_cpu(x86_cpu_to_logical_apicid, cpu) =
 		logical_smp_processor_id();
+
+	/*
+	 * Some NUMA implementations (NUMAQ) don't initialize apicid to
+	 * node mapping during NUMA init.  Now that logical apicid is
+	 * guaranteed to be known, give it another chance.  This is already
+	 * a bit too late - percpu allocation has already happened without
+	 * proper NUMA affinity.
+	 */
+	if (apic->x86_32_numa_cpu_node)
+		set_apicid_to_node(early_per_cpu(x86_cpu_to_apicid, cpu),
+				   apic->x86_32_numa_cpu_node(cpu));
 #endif
 
 	/*
@@ -1451,7 +1462,6 @@ int __init enable_IR(void)
 void __init enable_IR_x2apic(void)
 {
 	unsigned long flags;
-	struct IO_APIC_route_entry **ioapic_entries;
 	int ret, x2apic_enabled = 0;
 	int dmar_table_init_ret;
 
@@ -1459,13 +1469,7 @@ void __init enable_IR_x2apic(void)
 	if (dmar_table_init_ret && !x2apic_supported())
 		return;
 
-	ioapic_entries = alloc_ioapic_entries();
-	if (!ioapic_entries) {
-		pr_err("Allocate ioapic_entries failed\n");
-		goto out;
-	}
-
-	ret = save_IO_APIC_setup(ioapic_entries);
+	ret = save_ioapic_entries();
 	if (ret) {
 		pr_info("Saving IO-APIC state failed: %d\n", ret);
 		goto out;
@@ -1473,7 +1477,7 @@ void __init enable_IR_x2apic(void)
 
 	local_irq_save(flags);
 	legacy_pic->mask_all();
-	mask_IO_APIC_setup(ioapic_entries);
+	mask_ioapic_entries();
 
 	if (dmar_table_init_ret)
 		ret = 0;
@@ -1504,14 +1508,11 @@ void __init enable_IR_x2apic(void)
 
 nox2apic:
 	if (!ret) /* IR enabling failed */
-		restore_IO_APIC_setup(ioapic_entries);
+		restore_ioapic_entries();
 	legacy_pic->restore_mask();
 	local_irq_restore(flags);
 
 out:
-	if (ioapic_entries)
-		free_ioapic_entries(ioapic_entries);
-
 	if (x2apic_enabled)
 		return;
 
@@ -1813,30 +1814,41 @@ void smp_spurious_interrupt(struct pt_regs *regs)
  */
 void smp_error_interrupt(struct pt_regs *regs)
 {
-	u32 v, v1;
+	u32 v0, v1;
+	u32 i = 0;
+	static const char * const error_interrupt_reason[] = {
+		"Send CS error",		/* APIC Error Bit 0 */
+		"Receive CS error",		/* APIC Error Bit 1 */
+		"Send accept error",		/* APIC Error Bit 2 */
+		"Receive accept error",		/* APIC Error Bit 3 */
+		"Redirectable IPI",		/* APIC Error Bit 4 */
+		"Send illegal vector",		/* APIC Error Bit 5 */
+		"Received illegal vector",	/* APIC Error Bit 6 */
+		"Illegal register address",	/* APIC Error Bit 7 */
+	};
 
 	exit_idle();
 	irq_enter();
 	/* First tickle the hardware, only then report what went on. -- REW */
-	v = apic_read(APIC_ESR);
+	v0 = apic_read(APIC_ESR);
 	apic_write(APIC_ESR, 0);
 	v1 = apic_read(APIC_ESR);
 	ack_APIC_irq();
 	atomic_inc(&irq_err_count);
 
-	/*
-	 * Here is what the APIC error bits mean:
-	 * 0: Send CS error
-	 * 1: Receive CS error
-	 * 2: Send accept error
-	 * 3: Receive accept error
-	 * 4: Reserved
-	 * 5: Send illegal vector
-	 * 6: Received illegal vector
-	 * 7: Illegal register address
-	 */
-	pr_debug("APIC error on CPU%d: %02x(%02x)\n",
-		smp_processor_id(), v , v1);
+	apic_printk(APIC_DEBUG, KERN_DEBUG "APIC error on CPU%d: %02x(%02x)",
+		    smp_processor_id(), v0 , v1);
+
+	v1 = v1 & 0xff;
+	while (v1) {
+		if (v1 & 0x1)
+			apic_printk(APIC_DEBUG, KERN_CONT " : %s", error_interrupt_reason[i]);
+		i++;
+		v1 >>= 1;
+	};
+
+	apic_printk(APIC_DEBUG, KERN_CONT "\n");
+
 	irq_exit();
 }
 
@@ -2004,21 +2016,6 @@ void default_init_apic_ldr(void)
 	apic_write(APIC_LDR, val);
 }
 
-#ifdef CONFIG_X86_32
-int default_x86_32_numa_cpu_node(int cpu)
-{
-#ifdef CONFIG_NUMA
-	int apicid = early_per_cpu(x86_cpu_to_apicid, cpu);
-
-	if (apicid != BAD_APICID)
-		return __apicid_to_node[apicid];
-	return NUMA_NO_NODE;
-#else
-	return 0;
-#endif
-}
-#endif
-
 /*
  * Power management
  */
@@ -2089,28 +2086,20 @@ static void lapic_resume(void)
 {
 	unsigned int l, h;
 	unsigned long flags;
-	int maxlvt, ret;
-	struct IO_APIC_route_entry **ioapic_entries = NULL;
+	int maxlvt;
 
 	if (!apic_pm_state.active)
 		return;
 
 	local_irq_save(flags);
 	if (intr_remapping_enabled) {
-		ioapic_entries = alloc_ioapic_entries();
-		if (!ioapic_entries) {
-			WARN(1, "Alloc ioapic_entries in lapic resume failed.");
-			goto restore;
-		}
-
-		ret = save_IO_APIC_setup(ioapic_entries);
-		if (ret) {
-			WARN(1, "Saving IO-APIC state failed: %d\n", ret);
-			free_ioapic_entries(ioapic_entries);
-			goto restore;
-		}
-
-		mask_IO_APIC_setup(ioapic_entries);
+		/*
+		 * IO-APIC and PIC have their own resume routines.
+		 * We just mask them here to make sure the interrupt
+		 * subsystem is completely quiet while we enable x2apic
+		 * and interrupt-remapping.
+		 */
+		mask_ioapic_entries();
 		legacy_pic->mask_all();
 	}
 
@@ -2153,13 +2142,9 @@ static void lapic_resume(void)
 	apic_write(APIC_ESR, 0);
 	apic_read(APIC_ESR);
 
-	if (intr_remapping_enabled) {
+	if (intr_remapping_enabled)
 		reenable_intr_remapping(x2apic_mode);
-		legacy_pic->restore_mask();
-		restore_IO_APIC_setup(ioapic_entries);
-		free_ioapic_entries(ioapic_entries);
-	}
-restore:
+
 	local_irq_restore(flags);
 }