diff options
Diffstat (limited to 'arch/x86/kernel/acpi')
| -rw-r--r-- | arch/x86/kernel/acpi/Makefile | 9 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/Makefile | 57 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/copy.S | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/video-bios.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/video-mode.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/video-vesa.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/video-vga.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/wakemain.c | 81 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/wakeup.S | 113 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/wakeup.h | 36 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/wakeup.lds.S | 61 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/sleep.c | 71 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/sleep.h | 16 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/sleep_32.c | 40 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/wakeup_32.S | 247 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/wakeup_64.S | 313 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/wakeup_rm.S | 10 |
17 files changed, 475 insertions, 584 deletions
diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile index 19d3d6e9d09..7335959b6af 100644 --- a/arch/x86/kernel/acpi/Makefile +++ b/arch/x86/kernel/acpi/Makefile @@ -1,7 +1,14 @@ +subdir- := realmode + obj-$(CONFIG_ACPI) += boot.o -obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_$(BITS).o +obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup_rm.o wakeup_$(BITS).o ifneq ($(CONFIG_ACPI_PROCESSOR),) obj-y += cstate.o processor.o endif +$(obj)/wakeup_rm.o: $(obj)/realmode/wakeup.bin + +$(obj)/realmode/wakeup.bin: FORCE + $(Q)$(MAKE) $(build)=$(obj)/realmode $@ + diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile new file mode 100644 index 00000000000..092900854ac --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/Makefile @@ -0,0 +1,57 @@ +# +# arch/x86/kernel/acpi/realmode/Makefile +# +# This file is subject to the terms and conditions of the GNU General Public +# License. See the file "COPYING" in the main directory of this archive +# for more details. +# + +targets := wakeup.bin wakeup.elf + +wakeup-y += wakeup.o wakemain.o video-mode.o copy.o + +# The link order of the video-*.o modules can matter. In particular, +# video-vga.o *must* be listed first, followed by video-vesa.o. +# Hardware-specific drivers should follow in the order they should be +# probed, and video-bios.o should typically be last. +wakeup-y += video-vga.o +wakeup-y += video-vesa.o +wakeup-y += video-bios.o + +targets += $(wakeup-y) + +bootsrc := $(src)/../../../boot + +# --------------------------------------------------------------------------- + +# How to compile the 16-bit code. Note we always compile for -march=i386, +# that way we can complain to the user if the CPU is insufficient. +# Compile with _SETUP since this is similar to the boot-time setup code. +KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ + -I$(srctree)/$(bootsrc) \ + $(cflags-y) \ + -Wall -Wstrict-prototypes \ + -march=i386 -mregparm=3 \ + -include $(srctree)/$(bootsrc)/code16gcc.h \ + -fno-strict-aliasing -fomit-frame-pointer \ + $(call cc-option, -ffreestanding) \ + $(call cc-option, -fno-toplevel-reorder,\ + $(call cc-option, -fno-unit-at-a-time)) \ + $(call cc-option, -fno-stack-protector) \ + $(call cc-option, -mpreferred-stack-boundary=2) +KBUILD_CFLAGS += $(call cc-option, -m32) +KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ + +WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) + +LDFLAGS_wakeup.elf := -T + +CPPFLAGS_wakeup.lds += -P -C + +$(obj)/wakeup.elf: $(src)/wakeup.lds $(WAKEUP_OBJS) FORCE + $(call if_changed,ld) + +OBJCOPYFLAGS_wakeup.bin := -O binary + +$(obj)/wakeup.bin: $(obj)/wakeup.elf FORCE + $(call if_changed,objcopy) diff --git a/arch/x86/kernel/acpi/realmode/copy.S b/arch/x86/kernel/acpi/realmode/copy.S new file mode 100644 index 00000000000..dc59ebee69d --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/copy.S @@ -0,0 +1 @@ +#include "../../../boot/copy.S" diff --git a/arch/x86/kernel/acpi/realmode/video-bios.c b/arch/x86/kernel/acpi/realmode/video-bios.c new file mode 100644 index 00000000000..7deabc144a2 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-bios.c @@ -0,0 +1 @@ +#include "../../../boot/video-bios.c" diff --git a/arch/x86/kernel/acpi/realmode/video-mode.c b/arch/x86/kernel/acpi/realmode/video-mode.c new file mode 100644 index 00000000000..328ad209f11 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-mode.c @@ -0,0 +1 @@ +#include "../../../boot/video-mode.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vesa.c b/arch/x86/kernel/acpi/realmode/video-vesa.c new file mode 100644 index 00000000000..9dbb9672226 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-vesa.c @@ -0,0 +1 @@ +#include "../../../boot/video-vesa.c" diff --git a/arch/x86/kernel/acpi/realmode/video-vga.c b/arch/x86/kernel/acpi/realmode/video-vga.c new file mode 100644 index 00000000000..bcc81255f37 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/video-vga.c @@ -0,0 +1 @@ +#include "../../../boot/video-vga.c" diff --git a/arch/x86/kernel/acpi/realmode/wakemain.c b/arch/x86/kernel/acpi/realmode/wakemain.c new file mode 100644 index 00000000000..883962d9eef --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakemain.c @@ -0,0 +1,81 @@ +#include "wakeup.h" +#include "boot.h" + +static void udelay(int loops) +{ + while (loops--) + io_delay(); /* Approximately 1 us */ +} + +static void beep(unsigned int hz) +{ + u8 enable; + + if (!hz) { + enable = 0x00; /* Turn off speaker */ + } else { + u16 div = 1193181/hz; + + outb(0xb6, 0x43); /* Ctr 2, squarewave, load, binary */ + io_delay(); + outb(div, 0x42); /* LSB of counter */ + io_delay(); + outb(div >> 8, 0x42); /* MSB of counter */ + io_delay(); + + enable = 0x03; /* Turn on speaker */ + } + inb(0x61); /* Dummy read of System Control Port B */ + io_delay(); + outb(enable, 0x61); /* Enable timer 2 output to speaker */ + io_delay(); +} + +#define DOT_HZ 880 +#define DASH_HZ 587 +#define US_PER_DOT 125000 + +/* Okay, this is totally silly, but it's kind of fun. */ +static void send_morse(const char *pattern) +{ + char s; + + while ((s = *pattern++)) { + switch (s) { + case '.': + beep(DOT_HZ); + udelay(US_PER_DOT); + beep(0); + udelay(US_PER_DOT); + break; + case '-': + beep(DASH_HZ); + udelay(US_PER_DOT * 3); + beep(0); + udelay(US_PER_DOT); + break; + default: /* Assume it's a space */ + udelay(US_PER_DOT * 3); + break; + } + } +} + +void main(void) +{ + /* Kill machine if structures are wrong */ + if (wakeup_header.real_magic != 0x12345678) + while (1); + + if (wakeup_header.realmode_flags & 4) + send_morse("...-"); + + if (wakeup_header.realmode_flags & 1) + asm volatile("lcallw $0xc000,$3"); + + if (wakeup_header.realmode_flags & 2) { + /* Need to call BIOS */ + probe_cards(0); + set_mode(wakeup_header.video_mode); + } +} diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S new file mode 100644 index 00000000000..f9b77fb37e5 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -0,0 +1,113 @@ +/* + * ACPI wakeup real mode startup stub + */ +#include <asm/segment.h> +#include <asm/msr-index.h> +#include <asm/page.h> +#include <asm/pgtable.h> + + .code16 + .section ".header", "a" + +/* This should match the structure in wakeup.h */ + .globl wakeup_header +wakeup_header: +video_mode: .short 0 /* Video mode number */ +pmode_return: .byte 0x66, 0xea /* ljmpl */ + .long 0 /* offset goes here */ + .short __KERNEL_CS +pmode_cr0: .long 0 /* Saved %cr0 */ +pmode_cr3: .long 0 /* Saved %cr3 */ +pmode_cr4: .long 0 /* Saved %cr4 */ +pmode_efer: .quad 0 /* Saved EFER */ +pmode_gdt: .quad 0 +realmode_flags: .long 0 +real_magic: .long 0 +trampoline_segment: .word 0 +signature: .long 0x51ee1111 + + .text + .globl _start + .code16 +wakeup_code: +_start: + cli + cld + + /* Set up segments */ + movw %cs, %ax + movw %ax, %ds + movw %ax, %es + movw %ax, %ss + + movl $wakeup_stack_end, %esp + + /* Clear the EFLAGS */ + pushl $0 + popfl + + /* Check header signature... */ + movl signature, %eax + cmpl $0x51ee1111, %eax + jne bogus_real_magic + + /* Check we really have everything... */ + movl end_signature, %eax + cmpl $0x65a22c82, %eax + jne bogus_real_magic + + /* Call the C code */ + calll main + + /* Do any other stuff... */ + +#ifndef CONFIG_64BIT + /* This could also be done in C code... */ + movl pmode_cr3, %eax + movl %eax, %cr3 + + movl pmode_cr4, %ecx + jecxz 1f + movl %ecx, %cr4 +1: + movl pmode_efer, %eax + movl pmode_efer + 4, %edx + movl %eax, %ecx + orl %edx, %ecx + jz 1f + movl $0xc0000080, %ecx + wrmsr +1: + + lgdtl pmode_gdt + + /* This really couldn't... */ + movl pmode_cr0, %eax + movl %eax, %cr0 + jmp pmode_return +#else + pushw $0 + pushw trampoline_segment + pushw $0 + lret +#endif + +bogus_real_magic: +1: + hlt + jmp 1b + + .data + .balign 4 + .globl HEAP, heap_end +HEAP: + .long wakeup_heap +heap_end: + .long wakeup_stack + + .bss +wakeup_heap: + .space 2048 +wakeup_stack: + .space 2048 +wakeup_stack_end: diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h new file mode 100644 index 00000000000..ef8166fe802 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -0,0 +1,36 @@ +/* + * Definitions for the wakeup data structure at the head of the + * wakeup code. + */ + +#ifndef ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H +#define ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H + +#ifndef __ASSEMBLY__ +#include <linux/types.h> + +/* This must match data at wakeup.S */ +struct wakeup_header { + u16 video_mode; /* Video mode number */ + u16 _jmp1; /* ljmpl opcode, 32-bit only */ + u32 pmode_entry; /* Protected mode resume point, 32-bit only */ + u16 _jmp2; /* CS value, 32-bit only */ + u32 pmode_cr0; /* Protected mode cr0 */ + u32 pmode_cr3; /* Protected mode cr3 */ + u32 pmode_cr4; /* Protected mode cr4 */ + u32 pmode_efer_low; /* Protected mode EFER */ + u32 pmode_efer_high; + u64 pmode_gdt; + u32 realmode_flags; + u32 real_magic; + u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u32 signature; /* To check we have correct structure */ +} __attribute__((__packed__)); + +extern struct wakeup_header wakeup_header; +#endif + +#define HEADER_OFFSET 0x3f00 +#define WAKEUP_SIZE 0x4000 + +#endif /* ARCH_X86_KERNEL_ACPI_RM_WAKEUP_H */ diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S new file mode 100644 index 00000000000..22fab6c4be1 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S @@ -0,0 +1,61 @@ +/* + * wakeup.ld + * + * Linker script for the real-mode wakeup code + */ +#undef i386 +#include "wakeup.h" + +OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386") +OUTPUT_ARCH(i386) +ENTRY(_start) + +SECTIONS +{ + . = HEADER_OFFSET; + .header : { + *(.header) + } + + . = 0; + .text : { + *(.text*) + } + + . = ALIGN(16); + .rodata : { + *(.rodata*) + } + + .videocards : { + video_cards = .; + *(.videocards) + video_cards_end = .; + } + + . = ALIGN(16); + .data : { + *(.data*) + } + + .signature : { + end_signature = .; + LONG(0x65a22c82) + } + + . = ALIGN(16); + .bss : { + __bss_start = .; + *(.bss) + __bss_end = .; + } + + . = ALIGN(16); + _end = .; + + /DISCARD/ : { + *(.note*) + } + + . = ASSERT(_end <= WAKEUP_SIZE, "Wakeup too big!"); +} diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index dd78326ae47..afc25ee9964 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -10,30 +10,72 @@ #include <linux/dmi.h> #include <linux/cpumask.h> -#include <asm/smp.h> +#include "realmode/wakeup.h" +#include "sleep.h" -/* address in low memory of the wakeup routine. */ unsigned long acpi_wakeup_address; unsigned long acpi_realmode_flags; -extern char wakeup_start, wakeup_end; -extern unsigned long acpi_copy_wakeup_routine(unsigned long); +/* address in low memory of the wakeup routine. */ +static unsigned long acpi_realmode; + +#ifdef CONFIG_64BIT +static char temp_stack[10240]; +#endif /** * acpi_save_state_mem - save kernel state * * Create an identity mapped page table and copy the wakeup routine to * low memory. + * + * Note that this is too late to change acpi_wakeup_address. */ int acpi_save_state_mem(void) { - if (!acpi_wakeup_address) { - printk(KERN_ERR "Could not allocate memory during boot, S3 disabled\n"); + struct wakeup_header *header; + + if (!acpi_realmode) { + printk(KERN_ERR "Could not allocate memory during boot, " + "S3 disabled\n"); return -ENOMEM; } - memcpy((void *)acpi_wakeup_address, &wakeup_start, - &wakeup_end - &wakeup_start); - acpi_copy_wakeup_routine(acpi_wakeup_address); + memcpy((void *)acpi_realmode, &wakeup_code_start, WAKEUP_SIZE); + + header = (struct wakeup_header *)(acpi_realmode + HEADER_OFFSET); + if (header->signature != 0x51ee1111) { + printk(KERN_ERR "wakeup header does not match\n"); + return -EINVAL; + } + + header->video_mode = saved_video_mode; + +#ifndef CONFIG_64BIT + store_gdt((struct desc_ptr *)&header->pmode_gdt); + + header->pmode_efer_low = nx_enabled; + if (header->pmode_efer_low & 1) { + /* This is strange, why not save efer, always? */ + rdmsr(MSR_EFER, header->pmode_efer_low, + header->pmode_efer_high); + } +#endif /* !CONFIG_64BIT */ + + header->pmode_cr0 = read_cr0(); + header->pmode_cr4 = read_cr4(); + header->realmode_flags = acpi_realmode_flags; + header->real_magic = 0x12345678; + +#ifndef CONFIG_64BIT + header->pmode_entry = (u32)&wakeup_pmode_return; + header->pmode_cr3 = (u32)(swsusp_pg_dir - __PAGE_OFFSET); + saved_magic = 0x12345678; +#else /* CONFIG_64BIT */ + header->trampoline_segment = setup_trampoline() >> 4; + init_rsp = (unsigned long)temp_stack + 4096; + initial_code = (unsigned long)wakeup_long64; + saved_magic = 0x123456789abcdef0; +#endif /* CONFIG_64BIT */ return 0; } @@ -56,15 +98,20 @@ void acpi_restore_state_mem(void) */ void __init acpi_reserve_bootmem(void) { - if ((&wakeup_end - &wakeup_start) > PAGE_SIZE*2) { + if ((&wakeup_code_end - &wakeup_code_start) > WAKEUP_SIZE) { printk(KERN_ERR "ACPI: Wakeup code way too big, S3 disabled.\n"); return; } - acpi_wakeup_address = (unsigned long)alloc_bootmem_low(PAGE_SIZE*2); - if (!acpi_wakeup_address) + acpi_realmode = (unsigned long)alloc_bootmem_low(WAKEUP_SIZE); + + if (!acpi_realmode) { printk(KERN_ERR "ACPI: Cannot allocate lowmem, S3 disabled.\n"); + return; + } + + acpi_wakeup_address = acpi_realmode; } diff --git a/arch/x86/kernel/acpi/sleep.h b/arch/x86/kernel/acpi/sleep.h new file mode 100644 index 00000000000..adbcbaa6f1d --- /dev/null +++ b/arch/x86/kernel/acpi/sleep.h @@ -0,0 +1,16 @@ +/* + * Variables and functions used by the code in sleep.c + */ + +#include <asm/trampoline.h> + +extern char wakeup_code_start, wakeup_code_end; + +extern unsigned long saved_video_mode; +extern long saved_magic; + +extern int wakeup_pmode_return; +extern char swsusp_pg_dir[PAGE_SIZE]; + +extern unsigned long acpi_copy_wakeup_routine(unsigned long); +extern void wakeup_long64(void); diff --git a/arch/x86/kernel/acpi/sleep_32.c b/arch/x86/kernel/acpi/sleep_32.c deleted file mode 100644 index 63fe5525e02..00000000000 --- a/arch/x86/kernel/acpi/sleep_32.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * sleep.c - x86-specific ACPI sleep support. - * - * Copyright (C) 2001-2003 Patrick Mochel - * Copyright (C) 2001-2003 Pavel Machek <pavel@suse.cz> - */ - -#include <linux/acpi.h> -#include <linux/bootmem.h> -#include <linux/dmi.h> -#include <linux/cpumask.h> - -#include <asm/smp.h> - -/* Ouch, we want to delete this. We already have better version in userspace, in - s2ram from suspend.sf.net project */ -static __init int reset_videomode_after_s3(const struct dmi_system_id *d) -{ - acpi_realmode_flags |= 2; - return 0; -} - -static __initdata struct dmi_system_id acpisleep_dmi_table[] = { - { /* Reset video mode after returning from ACPI S3 sleep */ - .callback = reset_videomode_after_s3, - .ident = "Toshiba Satellite 4030cdt", - .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "S4030CDT/4.3"), - }, - }, - {} -}; - -static int __init acpisleep_dmi_init(void) -{ - dmi_check_system(acpisleep_dmi_table); - return 0; -} - -core_initcall(acpisleep_dmi_init); diff --git a/arch/x86/kernel/acpi/wakeup_32.S b/arch/x86/kernel/acpi/wakeup_32.S index f53e3277f8e..a12e6a9fb65 100644 --- a/arch/x86/kernel/acpi/wakeup_32.S +++ b/arch/x86/kernel/acpi/wakeup_32.S @@ -3,178 +3,12 @@ #include <asm/segment.h> #include <asm/page.h> -# -# wakeup_code runs in real mode, and at unknown address (determined at run-time). -# Therefore it must only use relative jumps/calls. -# -# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled -# -# If physical address of wakeup_code is 0x12345, BIOS should call us with -# cs = 0x1234, eip = 0x05 -# - -#define BEEP \ - inb $97, %al; \ - outb %al, $0x80; \ - movb $3, %al; \ - outb %al, $97; \ - outb %al, $0x80; \ - movb $-74, %al; \ - outb %al, $67; \ - outb %al, $0x80; \ - movb $-119, %al; \ - outb %al, $66; \ - outb %al, $0x80; \ - movb $15, %al; \ - outb %al, $66; - -ALIGN - .align 4096 -ENTRY(wakeup_start) -wakeup_code: - wakeup_code_start = . - .code16 - - cli - cld - - # setup data segment - movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start - movw %ax, %ss - - testl $4, realmode_flags - wakeup_code - jz 1f - BEEP -1: - mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board - - pushl $0 # Kill any dangerous flags - popfl - - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $1, realmode_flags - wakeup_code - jz 1f - lcall $0xc000,$3 - movw %cs, %ax - movw %ax, %ds # Bios might have played with that - movw %ax, %ss -1: - - testl $2, realmode_flags - wakeup_code - jz 1f - mov video_mode - wakeup_code, %ax - call mode_set -1: - - # set up page table - movl $swsusp_pg_dir-__PAGE_OFFSET, %eax - movl %eax, %cr3 - - testl $1, real_efer_save_restore - wakeup_code - jz 4f - # restore efer setting - movl real_save_efer_edx - wakeup_code, %edx - movl real_save_efer_eax - wakeup_code, %eax - mov $0xc0000080, %ecx - wrmsr -4: - # make sure %cr4 is set correctly (features, etc) - movl real_save_cr4 - wakeup_code, %eax - movl %eax, %cr4 - - # need a gdt -- use lgdtl to force 32-bit operands, in case - # the GDT is located past 16 megabytes. - lgdtl real_save_gdt - wakeup_code - - movl real_save_cr0 - wakeup_code, %eax - movl %eax, %cr0 - jmp 1f -1: - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $8, realmode_flags - wakeup_code - jz 1f - BEEP -1: - ljmpl $__KERNEL_CS, $wakeup_pmode_return - -real_save_gdt: .word 0 - .long 0 -real_save_cr0: .long 0 -real_save_cr3: .long 0 -real_save_cr4: .long 0 -real_magic: .long 0 -video_mode: .long 0 -realmode_flags: .long 0 -real_efer_save_restore: .long 0 -real_save_efer_edx: .long 0 -real_save_efer_eax: .long 0 - -bogus_real_magic: - jmp bogus_real_magic - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -# Setting of user mode (AX=mode ID) => CF=success - -# For now, we only handle VESA modes (0x0200..0x03ff). To handle other -# modes, we should probably compile in the video code from the boot -# directory. -mode_set: - movw %ax, %bx - subb $VIDEO_FIRST_VESA>>8, %bh - cmpb $2, %bh - jb check_vesa - -setbad: - clc - ret - -check_vesa: - orw $0x4000, %bx # Use linear frame buffer - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz setbad # AH=0 if OK - - stc - ret +# Copyright 2003, 2008 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 .code32 ALIGN -.org 0x800 -wakeup_stack_begin: # Stack grows down - -.org 0xff0 # Just below end of page -wakeup_stack: -ENTRY(wakeup_end) - -.org 0x1000 - +ENTRY(wakeup_pmode_return) wakeup_pmode_return: movw $__KERNEL_DS, %ax movw %ax, %ss @@ -187,7 +21,7 @@ wakeup_pmode_return: lgdt saved_gdt lidt saved_idt lldt saved_ldt - ljmp $(__KERNEL_CS),$1f + ljmp $(__KERNEL_CS), $1f 1: movl %cr3, %eax movl %eax, %cr3 @@ -201,82 +35,41 @@ wakeup_pmode_return: jne bogus_magic # jump to place where we left off - movl saved_eip,%eax + movl saved_eip, %eax jmp *%eax bogus_magic: jmp bogus_magic -## -# acpi_copy_wakeup_routine -# -# Copy the above routine to low memory. -# -# Parameters: -# %eax: place to copy wakeup routine to -# -# Returned address is location of code in low memory (past data and stack) -# -ENTRY(acpi_copy_wakeup_routine) - pushl %ebx +save_registers: sgdt saved_gdt sidt saved_idt sldt saved_ldt str saved_tss - movl nx_enabled, %edx - movl %edx, real_efer_save_restore - wakeup_start (%eax) - testl $1, real_efer_save_restore - wakeup_start (%eax) - jz 2f - # save efer setting - pushl %eax - movl %eax, %ebx - mov $0xc0000080, %ecx - rdmsr - movl %edx, real_save_efer_edx - wakeup_start (%ebx) - movl %eax, real_save_efer_eax - wakeup_start (%ebx) - popl %eax -2: - - movl %cr3, %edx - movl %edx, real_save_cr3 - wakeup_start (%eax) - movl %cr4, %edx - movl %edx, real_save_cr4 - wakeup_start (%eax) - movl %cr0, %edx - movl %edx, real_save_cr0 - wakeup_start (%eax) - sgdt real_save_gdt - wakeup_start (%eax) - - movl saved_videomode, %edx - movl %edx, video_mode - wakeup_start (%eax) - movl acpi_realmode_flags, %edx - movl %edx, realmode_flags - wakeup_start (%eax) - movl $0x12345678, real_magic - wakeup_start (%eax) - movl $0x12345678, saved_magic - popl %ebx - ret - -save_registers: leal 4(%esp), %eax movl %eax, saved_context_esp - movl %ebx, saved_context_ebx - movl %ebp, saved_context_ebp - movl %esi, saved_context_esi - movl %edi, saved_context_edi - pushfl ; popl saved_context_eflags - - movl $ret_point, saved_eip + movl %ebx, saved_context_ebx + movl %ebp, saved_context_ebp + movl %esi, saved_context_esi + movl %edi, saved_context_edi + pushfl + popl saved_context_eflags + + movl $ret_point, saved_eip ret restore_registers: - movl saved_context_ebp, %ebp - movl saved_context_ebx, %ebx - movl saved_context_esi, %esi - movl saved_context_edi, %edi - pushl saved_context_eflags ; popfl - ret + movl saved_context_ebp, %ebp + movl saved_context_ebx, %ebx + movl saved_context_esi, %esi + movl saved_context_edi, %edi + pushl saved_context_eflags + popfl + ret ENTRY(do_suspend_lowlevel) call save_processor_state diff --git a/arch/x86/kernel/acpi/wakeup_64.S b/arch/x86/kernel/acpi/wakeup_64.S index 2e1b9e0d076..bcc293423a7 100644 --- a/arch/x86/kernel/acpi/wakeup_64.S +++ b/arch/x86/kernel/acpi/wakeup_64.S @@ -7,191 +7,18 @@ #include <asm/asm-offsets.h> # Copyright 2003 Pavel Machek <pavel@suse.cz>, distribute under GPLv2 -# -# wakeup_code runs in real mode, and at unknown address (determined at run-time). -# Therefore it must only use relative jumps/calls. -# -# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled -# -# If physical address of wakeup_code is 0x12345, BIOS should call us with -# cs = 0x1234, eip = 0x05 -# - -#define BEEP \ - inb $97, %al; \ - outb %al, $0x80; \ - movb $3, %al; \ - outb %al, $97; \ - outb %al, $0x80; \ - movb $-74, %al; \ - outb %al, $67; \ - outb %al, $0x80; \ - movb $-119, %al; \ - outb %al, $66; \ - outb %al, $0x80; \ - movb $15, %al; \ - outb %al, $66; - - -ALIGN - .align 16 -ENTRY(wakeup_start) -wakeup_code: - wakeup_code_start = . - .code16 - -# Running in *copy* of this code, somewhere in low 1MB. - - cli - cld - # setup data segment - movw %cs, %ax - movw %ax, %ds # Make ds:0 point to wakeup_start - movw %ax, %ss - - # Data segment must be set up before we can see whether to beep. - testl $4, realmode_flags - wakeup_code - jz 1f - BEEP -1: - - # Private stack is needed for ASUS board - mov $(wakeup_stack - wakeup_code), %sp - - pushl $0 # Kill any dangerous flags - popfl - - movl real_magic - wakeup_code, %eax - cmpl $0x12345678, %eax - jne bogus_real_magic - - testl $1, realmode_flags - wakeup_code - jz 1f - lcall $0xc000,$3 - movw %cs, %ax - movw %ax, %ds # Bios might have played with that - movw %ax, %ss -1: - - testl $2, realmode_flags - wakeup_code - jz 1f - mov video_mode - wakeup_code, %ax - call mode_set -1: - - mov %ds, %ax # Find 32bit wakeup_code addr - movzx %ax, %esi # (Convert %ds:gdt to a liner ptr) - shll $4, %esi - # Fix up the vectors - addl %esi, wakeup_32_vector - wakeup_code - addl %esi, wakeup_long64_vector - wakeup_code - addl %esi, gdt_48a + 2 - wakeup_code # Fixup the gdt pointer - - lidtl %ds:idt_48a - wakeup_code - lgdtl %ds:gdt_48a - wakeup_code # load gdt with whatever is - # appropriate - - movl $1, %eax # protected mode (PE) bit - lmsw %ax # This is it! - jmp 1f -1: - - ljmpl *(wakeup_32_vector - wakeup_code) - - .balign 4 -wakeup_32_vector: - .long wakeup_32 - wakeup_code - .word __KERNEL32_CS, 0 - - .code32 -wakeup_32: -# Running in this code, but at low address; paging is not yet turned on. - - movl $__KERNEL_DS, %eax - movl %eax, %ds - - /* - * Prepare for entering 64bits mode - */ - - /* Enable PAE */ - xorl %eax, %eax - btsl $5, %eax - movl %eax, %cr4 - - /* Setup early boot stage 4 level pagetables */ - leal (wakeup_level4_pgt - wakeup_code)(%esi), %eax - movl %eax, %cr3 - - /* Check if nx is implemented */ - movl $0x80000001, %eax - cpuid - movl %edx,%edi - - /* Enable Long Mode */ - xorl %eax, %eax - btsl $_EFER_LME, %eax - - /* No Execute supported? */ - btl $20,%edi - jnc 1f - btsl $_EFER_NX, %eax - - /* Make changes effective */ -1: movl $MSR_EFER, %ecx - xorl %edx, %edx - wrmsr - - xorl %eax, %eax - btsl $31, %eax /* Enable paging and in turn activate Long Mode */ - btsl $0, %eax /* Enable protected mode */ - - /* Make changes effective */ - movl %eax, %cr0 - - /* At this point: - CR4.PAE must be 1 - CS.L must be 0 - CR3 must point to PML4 - Next instruction must be a branch - This must be on identity-mapped page - */ - /* - * At this point we're in long mode but in 32bit compatibility mode - * with EFER.LME = 1, CS.L = 0, CS.D = 1 (and in turn - * EFER.LMA = 1). Now we want to jump in 64bit mode, to do that we load - * the new gdt/idt that has __KERNEL_CS with CS.L = 1. - */ - - /* Finally jump in 64bit mode */ - ljmp *(wakeup_long64_vector - wakeup_code)(%esi) - - .balign 4 -wakeup_long64_vector: - .long wakeup_long64 - wakeup_code - .word __KERNEL_CS, 0 .code64 - - /* Hooray, we are in Long 64-bit mode (but still running in - * low memory) - */ -wakeup_long64: /* - * We must switch to a new descriptor in kernel space for the GDT - * because soon the kernel won't have access anymore to the userspace - * addresses where we're currently running on. We have to do that here - * because in 32bit we couldn't load a 64bit linear address. + * Hooray, we are in Long 64-bit mode (but still running in low memory) */ - lgdt cpu_gdt_descr - - movq saved_magic, %rax - movq $0x123456789abcdef0, %rdx - cmpq %rdx, %rax - jne bogus_64_magic +ENTRY(wakeup_long64) +wakeup_long64: + movq saved_magic, %rax + movq $0x123456789abcdef0, %rdx + cmpq %rdx, %rax + jne bogus_64_magic - nop - nop movw $__KERNEL_DS, %ax movw %ax, %ss movw %ax, %ds @@ -208,130 +35,8 @@ wakeup_long64: movq saved_rip, %rax jmp *%rax -.code32 - - .align 64 -gdta: - /* Its good to keep gdt in sync with one in trampoline.S */ - .word 0, 0, 0, 0 # dummy - /* ??? Why I need the accessed bit set in order for this to work? */ - .quad 0x00cf9b000000ffff # __KERNEL32_CS - .quad 0x00af9b000000ffff # __KERNEL_CS - .quad 0x00cf93000000ffff # __KERNEL_DS - -idt_48a: - .word 0 # idt limit = 0 - .word 0, 0 # idt base = 0L - -gdt_48a: - .word 0x800 # gdt limit=2048, - # 256 GDT entries - .long gdta - wakeup_code # gdt base (relocated in later) - -real_magic: .quad 0 -video_mode: .quad 0 -realmode_flags: .quad 0 - -.code16 -bogus_real_magic: - jmp bogus_real_magic - -.code64 bogus_64_magic: - jmp bogus_64_magic - -/* This code uses an extended set of video mode numbers. These include: - * Aliases for standard modes - * NORMAL_VGA (-1) - * EXTENDED_VGA (-2) - * ASK_VGA (-3) - * Video modes numbered by menu position -- NOT RECOMMENDED because of lack - * of compatibility when extending the table. These are between 0x00 and 0xff. - */ -#define VIDEO_FIRST_MENU 0x0000 - -/* Standard BIOS video modes (BIOS number + 0x0100) */ -#define VIDEO_FIRST_BIOS 0x0100 - -/* VESA BIOS video modes (VESA number + 0x0200) */ -#define VIDEO_FIRST_VESA 0x0200 - -/* Video7 special modes (BIOS number + 0x0900) */ -#define VIDEO_FIRST_V7 0x0900 - -# Setting of user mode (AX=mode ID) => CF=success - -# For now, we only handle VESA modes (0x0200..0x03ff). To handle other -# modes, we should probably compile in the video code from the boot -# directory. -.code16 -mode_set: - movw %ax, %bx - subb $VIDEO_FIRST_VESA>>8, %bh - cmpb $2, %bh - jb check_vesa - -setbad: - clc - ret - -check_vesa: - orw $0x4000, %bx # Use linear frame buffer - movw $0x4f02, %ax # VESA BIOS mode set call - int $0x10 - cmpw $0x004f, %ax # AL=4f if implemented - jnz setbad # AH=0 if OK - - stc - ret - -wakeup_stack_begin: # Stack grows down - -.org 0xff0 -wakeup_stack: # Just below end of page - -.org 0x1000 -ENTRY(wakeup_level4_pgt) - .quad level3_ident_pgt - __START_KERNEL_map + _KERNPG_TABLE - .fill 510,8,0 - /* (2^48-(2*1024*1024*1024))/(2^39) = 511 */ - .quad level3_kernel_pgt - __START_KERNEL_map + _KERNPG_TABLE - -ENTRY(wakeup_end) - -## -# acpi_copy_wakeup_routine -# -# Copy the above routine to low memory. -# -# Parameters: -# %rdi: place to copy wakeup routine to -# -# Returned address is location of code in low memory (past data and stack) -# - .code64 -ENTRY(acpi_copy_wakeup_routine) - pushq %rax - pushq %rdx - - movl saved_video_mode, %edx - movl %edx, video_mode - wakeup_start (,%rdi) - movl acpi_realmode_flags, %edx - movl %edx, realmode_flags - wakeup_start (,%rdi) - movq $0x12345678, real_magic - wakeup_start (,%rdi) - movq $0x123456789abcdef0, %rdx - movq %rdx, saved_magic - - movq saved_magic, %rax - movq $0x123456789abcdef0, %rdx - cmpq %rdx, %rax - jne bogus_64_magic - - # restore the regs we used - popq %rdx - popq %rax -ENTRY(do_suspend_lowlevel_s4bios) - ret + jmp bogus_64_magic .align 2 .p2align 4,,15 @@ -414,7 +119,7 @@ do_suspend_lowlevel: jmp restore_processor_state .LFE5: .Lfe5: - .size do_suspend_lowlevel,.Lfe5-do_suspend_lowlevel + .size do_suspend_lowlevel, .Lfe5-do_suspend_lowlevel .data ALIGN diff --git a/arch/x86/kernel/acpi/wakeup_rm.S b/arch/x86/kernel/acpi/wakeup_rm.S new file mode 100644 index 00000000000..6ff3b573057 --- /dev/null +++ b/arch/x86/kernel/acpi/wakeup_rm.S @@ -0,0 +1,10 @@ +/* + * Wrapper script for the realmode binary as a transport object + * before copying to low memory. + */ + .section ".rodata","a" + .globl wakeup_code_start, wakeup_code_end +wakeup_code_start: + .incbin "arch/x86/kernel/acpi/realmode/wakeup.bin" +wakeup_code_end: + .size wakeup_code_start, .-wakeup_code_start |