diff options
Diffstat (limited to 'arch/x86/boot/compressed/head_32.S')
| -rw-r--r-- | arch/x86/boot/compressed/head_32.S | 280 |
1 files changed, 168 insertions, 112 deletions
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index ba7736cf2ec..cbed1407a5c 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -12,177 +12,233 @@ * the page directory. [According to comments etc elsewhere on a compressed * kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC] * - * Page 0 is deliberately kept safe, since System Management Mode code in + * Page 0 is deliberately kept safe, since System Management Mode code in * laptops may need to access the BIOS data stored there. This is also - * useful for future device drivers that either access the BIOS via VM86 + * useful for future device drivers that either access the BIOS via VM86 * mode. */ /* * High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996 */ -.text + .text +#include <linux/init.h> #include <linux/linkage.h> #include <asm/segment.h> -#include <asm/page.h> +#include <asm/page_types.h> #include <asm/boot.h> #include <asm/asm-offsets.h> -.section ".text.head","ax",@progbits - .globl startup_32 + __HEAD +ENTRY(startup_32) +#ifdef CONFIG_EFI_STUB + jmp preferred_addr + + /* + * We don't need the return address, so set up the stack so + * efi_main() can find its arguments. + */ +ENTRY(efi_pe_entry) + add $0x4, %esp + + call 1f +1: popl %esi + subl $1b, %esi + + popl %ecx + movl %ecx, efi32_config(%esi) /* Handle */ + popl %ecx + movl %ecx, efi32_config+8(%esi) /* EFI System table pointer */ + + /* Relocate efi_config->call() */ + leal efi32_config(%esi), %eax + add %esi, 88(%eax) + pushl %eax + + call make_boot_params + cmpl $0, %eax + je fail + movl %esi, BP_code32_start(%eax) + popl %ecx + pushl %eax + pushl %ecx + jmp 2f /* Skip efi_config initialization */ + +ENTRY(efi32_stub_entry) + add $0x4, %esp + popl %ecx + popl %edx + + call 1f +1: popl %esi + subl $1b, %esi + + movl %ecx, efi32_config(%esi) /* Handle */ + movl %edx, efi32_config+8(%esi) /* EFI System table pointer */ + + /* Relocate efi_config->call() */ + leal efi32_config(%esi), %eax + add %esi, 88(%eax) + pushl %eax +2: + call efi_main + cmpl $0, %eax + movl %eax, %esi + jne 2f +fail: + /* EFI init failed, so hang. */ + hlt + jmp fail +2: + movl BP_code32_start(%esi), %eax + leal preferred_addr(%eax), %eax + jmp *%eax -startup_32: +preferred_addr: +#endif cld - /* test KEEP_SEGMENTS flag to see if the bootloader is asking - * us to not reload segments */ - testb $(1<<6), BP_loadflags(%esi) - jnz 1f + /* + * Test KEEP_SEGMENTS flag to see if the bootloader is asking + * us to not reload segments + */ + testb $(1<<6), BP_loadflags(%esi) + jnz 1f cli - movl $(__BOOT_DS),%eax - movl %eax,%ds - movl %eax,%es - movl %eax,%fs - movl %eax,%gs - movl %eax,%ss + movl $__BOOT_DS, %eax + movl %eax, %ds + movl %eax, %es + movl %eax, %fs + movl %eax, %gs + movl %eax, %ss 1: -/* Calculate the delta between where we were compiled to run +/* + * Calculate the delta between where we were compiled to run * at and where we were actually loaded at. This can only be done * with a short local call on x86. Nothing else will tell us what * address we are running at. The reserved chunk of the real-mode * data at 0x1e4 (defined as a scratch field) are used as the stack * for this calculation. Only 4 bytes are needed. */ - leal (0x1e4+4)(%esi), %esp - call 1f -1: popl %ebp - subl $1b, %ebp + leal (BP_scratch+4)(%esi), %esp + call 1f +1: popl %ebp + subl $1b, %ebp -/* %ebp contains the address we are loaded at by the boot loader and %ebx +/* + * %ebp contains the address we are loaded at by the boot loader and %ebx * contains the address where we should move the kernel image temporarily * for safe in-place decompression. */ #ifdef CONFIG_RELOCATABLE - movl %ebp, %ebx - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx -#else - movl $LOAD_PHYSICAL_ADDR, %ebx + movl %ebp, %ebx + movl BP_kernel_alignment(%esi), %eax + decl %eax + addl %eax, %ebx + notl %eax + andl %eax, %ebx + cmpl $LOAD_PHYSICAL_ADDR, %ebx + jge 1f #endif + movl $LOAD_PHYSICAL_ADDR, %ebx +1: + + /* Target address to relocate to for decompression */ + addl $z_extract_offset, %ebx - /* Replace the compressed data size with the uncompressed size */ - subl input_len(%ebp), %ebx - movl output_len(%ebp), %eax - addl %eax, %ebx - /* Add 8 bytes for every 32K input block */ - shrl $12, %eax - addl %eax, %ebx - /* Add 32K + 18 bytes of extra slack */ - addl $(32768 + 18), %ebx - /* Align on a 4K boundary */ - addl $4095, %ebx - andl $~4095, %ebx - -/* Copy the compressed kernel to the end of our buffer + /* Set up the stack */ + leal boot_stack_end(%ebx), %esp + + /* Zero EFLAGS */ + pushl $0 + popfl + +/* + * Copy the compressed kernel to the end of our buffer * where decompression in place becomes safe. */ - pushl %esi - leal _end(%ebp), %esi - leal _end(%ebx), %edi - movl $(_end - startup_32), %ecx + pushl %esi + leal (_bss-4)(%ebp), %esi + leal (_bss-4)(%ebx), %edi + movl $(_bss - startup_32), %ecx + shrl $2, %ecx std - rep - movsb + rep movsl cld - popl %esi - -/* Compute the kernel start address. - */ -#ifdef CONFIG_RELOCATABLE - addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp - andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp -#else - movl $LOAD_PHYSICAL_ADDR, %ebp -#endif + popl %esi /* * Jump to the relocated address. */ - leal relocated(%ebx), %eax - jmp *%eax -.section ".text" + leal relocated(%ebx), %eax + jmp *%eax +ENDPROC(startup_32) + + .text relocated: /* - * Clear BSS + * Clear BSS (stack is currently empty) */ - xorl %eax,%eax - leal _edata(%ebx),%edi - leal _end(%ebx), %ecx - subl %edi,%ecx - cld - rep - stosb + xorl %eax, %eax + leal _bss(%ebx), %edi + leal _ebss(%ebx), %ecx + subl %edi, %ecx + shrl $2, %ecx + rep stosl /* - * Setup the stack for the decompressor + * Adjust our own GOT */ - leal boot_stack_end(%ebx), %esp + leal _got(%ebx), %edx + leal _egot(%ebx), %ecx +1: + cmpl %ecx, %edx + jae 2f + addl %ebx, (%edx) + addl $4, %edx + jmp 1b +2: /* * Do the decompression, and jump to the new kernel.. */ - movl output_len(%ebx), %eax - pushl %eax - pushl %ebp # output address - movl input_len(%ebx), %eax - pushl %eax # input_len - leal input_data(%ebx), %eax - pushl %eax # input_data - leal boot_heap(%ebx), %eax - pushl %eax # heap area as third argument - pushl %esi # real mode pointer as second arg - call decompress_kernel - addl $20, %esp - popl %ecx - -#if CONFIG_RELOCATABLE -/* Find the address of the relocations. - */ - movl %ebp, %edi - addl %ecx, %edi + /* push arguments for decompress_kernel: */ + pushl $z_output_len /* decompressed length */ + leal z_extract_offset_negative(%ebx), %ebp + pushl %ebp /* output address */ + pushl $z_input_len /* input_len */ + leal input_data(%ebx), %eax + pushl %eax /* input_data */ + leal boot_heap(%ebx), %eax + pushl %eax /* heap area */ + pushl %esi /* real mode pointer */ + call decompress_kernel /* returns kernel location in %eax */ + addl $24, %esp -/* Calculate the delta between where vmlinux was compiled to run - * and where it was actually loaded. - */ - movl %ebp, %ebx - subl $LOAD_PHYSICAL_ADDR, %ebx - jz 2f /* Nothing to be done if loaded at compiled addr. */ /* - * Process relocations. + * Jump to the decompressed kernel. */ - -1: subl $4, %edi - movl 0(%edi), %ecx - testl %ecx, %ecx - jz 2f - addl %ebx, -__PAGE_OFFSET(%ebx, %ecx) - jmp 1b -2: + xorl %ebx, %ebx + jmp *%eax + +#ifdef CONFIG_EFI_STUB + .data +efi32_config: + .fill 11,8,0 + .long efi_call_phys + .long 0 + .byte 0 #endif /* - * Jump to the decompressed kernel. + * Stack and heap for uncompression */ - xorl %ebx,%ebx - jmp *%ebp - -.bss -/* Stack and heap for uncompression */ -.balign 4 + .bss + .balign 4 boot_heap: .fill BOOT_HEAP_SIZE, 1, 0 boot_stack: |