diff options
Diffstat (limited to 'arch/x86/Kconfig')
| -rw-r--r-- | arch/x86/Kconfig | 145 |
1 files changed, 63 insertions, 82 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index cea0cd9a316..dfabfefc21c 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -25,14 +25,17 @@ config X86 select HAVE_IDE select HAVE_OPROFILE select HAVE_PERF_EVENTS if (!M386 && !M486) + select HAVE_IRQ_WORK select HAVE_IOREMAP_PROT select HAVE_KPROBES + select HAVE_MEMBLOCK select ARCH_WANT_OPTIONAL_GPIOLIB select ARCH_WANT_FRAME_POINTERS select HAVE_DMA_ATTRS select HAVE_KRETPROBES select HAVE_OPTPROBES select HAVE_FTRACE_MCOUNT_RECORD + select HAVE_C_RECORDMCOUNT select HAVE_DYNAMIC_FTRACE select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_GRAPH_TRACER @@ -59,6 +62,12 @@ config X86 select ANON_INODES select HAVE_ARCH_KMEMCHECK select HAVE_USER_RETURN_NOTIFIER + select HAVE_ARCH_JUMP_LABEL + select HAVE_TEXT_POKE_SMP + select HAVE_GENERIC_HARDIRQS + select HAVE_SPARSE_IRQ + select GENERIC_IRQ_PROBE + select GENERIC_PENDING_IRQ if SMP config INSTRUCTION_DECODER def_bool (KPROBES || PERF_EVENTS) @@ -193,27 +202,10 @@ config ARCH_SUPPORTS_OPTIMIZED_INLINING config ARCH_SUPPORTS_DEBUG_PAGEALLOC def_bool y -config HAVE_EARLY_RES - def_bool y - config HAVE_INTEL_TXT def_bool y depends on EXPERIMENTAL && DMAR && ACPI -# Use the generic interrupt handling code in kernel/irq/: -config GENERIC_HARDIRQS - def_bool y - -config GENERIC_HARDIRQS_NO__DO_IRQ - def_bool y - -config GENERIC_IRQ_PROBE - def_bool y - -config GENERIC_PENDING_IRQ - def_bool y - depends on GENERIC_HARDIRQS && SMP - config USE_GENERIC_SMP_HELPERS def_bool y depends on SMP @@ -296,23 +288,6 @@ config X86_X2APIC If you don't know what to do here, say N. -config SPARSE_IRQ - bool "Support sparse irq numbering" - depends on PCI_MSI || HT_IRQ - ---help--- - This enables support for sparse irqs. This is useful for distro - kernels that want to define a high CONFIG_NR_CPUS value but still - want to have low kernel memory footprint on smaller machines. - - ( Sparse IRQs can also be beneficial on NUMA boxes, as they spread - out the irq_desc[] array in a more NUMA-friendly way. ) - - If you don't know what to do here, say N. - -config NUMA_IRQ_DESC - def_bool y - depends on SPARSE_IRQ && NUMA - config X86_MPPARSE bool "Enable MPS table" if ACPI default y @@ -517,25 +492,6 @@ if PARAVIRT_GUEST source "arch/x86/xen/Kconfig" -config VMI - bool "VMI Guest support (DEPRECATED)" - select PARAVIRT - depends on X86_32 - ---help--- - VMI provides a paravirtualized interface to the VMware ESX server - (it could be used by other hypervisors in theory too, but is not - at the moment), by linking the kernel to a GPL-ed ROM module - provided by the hypervisor. - - As of September 2009, VMware has started a phased retirement - of this feature from VMware's products. Please see - feature-removal-schedule.txt for details. If you are - planning to enable this option, please note that you cannot - live migrate a VMI enabled VM to a future VMware product, - which doesn't support VMI. So if you expect your kernel to - seamlessly migrate to newer VMware products, keep this - disabled. - config KVM_CLOCK bool "KVM paravirtualized clock" select PARAVIRT @@ -590,16 +546,7 @@ config PARAVIRT_DEBUG a paravirt_op is missing when it is called. config NO_BOOTMEM - default y - bool "Disable Bootmem code" - ---help--- - Use early_res directly instead of bootmem before slab is ready. - - allocator (buddy) [generic] - - early allocator (bootmem) [generic] - - very early allocator (reserve_early*()) [x86] - - very very early allocator (early brk model) [x86] - So reduce one layer between early allocator to final allocator - + def_bool y config MEMTEST bool "Memtest" @@ -670,7 +617,7 @@ config GART_IOMMU bool "GART IOMMU support" if EMBEDDED default y select SWIOTLB - depends on X86_64 && PCI && K8_NB + depends on X86_64 && PCI && AMD_NB ---help--- Support for full DMA access of devices with 32bit memory access only on systems with more than 3GB. This is usually needed for USB, @@ -795,6 +742,17 @@ config SCHED_MC making when dealing with multi-core CPU chips at a cost of slightly increased overhead in some places. If unsure say N here. +config IRQ_TIME_ACCOUNTING + bool "Fine granularity task level IRQ time accounting" + default n + ---help--- + Select this option to enable fine granularity task irq time + accounting. This is done by reading a timestamp on each + transitions between softirq and hardirq state, so there can be a + small performance impact. + + If in doubt, say N here. + source "kernel/Kconfig.preempt" config X86_UP_APIC @@ -1148,6 +1106,9 @@ config X86_PAE config ARCH_PHYS_ADDR_T_64BIT def_bool X86_64 || X86_PAE +config ARCH_DMA_ADDR_T_64BIT + def_bool X86_64 || HIGHMEM64G + config DIRECT_GBPAGES bool "Enable 1GB pages for kernel pagetables" if EMBEDDED default y @@ -1326,25 +1287,34 @@ config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK Set whether the default state of memory_corruption_check is on or off. -config X86_RESERVE_LOW_64K - bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen" - default y +config X86_RESERVE_LOW + int "Amount of low memory, in kilobytes, to reserve for the BIOS" + default 64 + range 4 640 ---help--- - Reserve the first 64K of physical RAM on BIOSes that are known - to potentially corrupt that memory range. A numbers of BIOSes are - known to utilize this area during suspend/resume, so it must not - be used by the kernel. + Specify the amount of low memory to reserve for the BIOS. + + The first page contains BIOS data structures that the kernel + must not use, so that page must always be reserved. + + By default we reserve the first 64K of physical RAM, as a + number of BIOSes are known to corrupt that memory range + during events such as suspend/resume or monitor cable + insertion, so it must not be used by the kernel. - Set this to N if you are absolutely sure that you trust the BIOS - to get all its memory reservations and usages right. + You can set this to 4 if you are absolutely sure that you + trust the BIOS to get all its memory reservations and usages + right. If you know your BIOS have problems beyond the + default 64K area, you can set this to 640 to avoid using the + entire low memory range. - If you have doubts about the BIOS (e.g. suspend/resume does not - work or there's kernel crashes after certain hardware hotplug - events) and it's not AMI or Phoenix, then you might want to enable - X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical - corruption patterns. + If you have doubts about the BIOS (e.g. suspend/resume does + not work or there's kernel crashes after certain hardware + hotplug events) then you might want to enable + X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check + typical corruption patterns. - Say Y if unsure. + Leave this to the default value of 64 if you are unsure. config MATH_EMULATION bool @@ -1900,7 +1870,7 @@ config PCI_GODIRECT bool "Direct" config PCI_GOOLPC - bool "OLPC" + bool "OLPC XO-1" depends on OLPC config PCI_GOANY @@ -2061,14 +2031,21 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" select GPIOLIB + select OLPC_OPENFIRMWARE ---help--- Add support for detecting the unique features of the OLPC XO hardware. +config OLPC_XO1 + tristate "OLPC XO-1 support" + depends on OLPC && PCI + ---help--- + Add support for non-essential features of the OLPC XO-1 laptop. + config OLPC_OPENFIRMWARE bool "Support for OLPC's Open Firmware" depends on !X86_64 && !X86_PAE - default y if OLPC + default n help This option adds support for the implementation of Open Firmware that is used on the OLPC XO-1 Children's Machine. @@ -2076,7 +2053,7 @@ config OLPC_OPENFIRMWARE endif # X86_32 -config K8_NB +config AMD_NB def_bool y depends on CPU_SUP_AMD && PCI @@ -2125,6 +2102,10 @@ config HAVE_ATOMIC_IOMAP def_bool y depends on X86_32 +config HAVE_TEXT_POKE_SMP + bool + select STOP_MACHINE if SMP + source "net/Kconfig" source "drivers/Kconfig" |