diff options
Diffstat (limited to 'arch/sparc')
111 files changed, 1580 insertions, 4466 deletions
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index a214002114e..e594559c8db 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -20,6 +20,11 @@ config GENERIC_ISA_DMA bool default y +config GENERIC_GPIO + bool + help + Generic GPIO API support + config ARCH_NO_VIRT_TO_BUS def_bool y @@ -32,6 +37,8 @@ config HZ source "init/Kconfig" +source "kernel/Kconfig.freezer" + menu "General machine setup" config SMP @@ -69,6 +76,9 @@ config SPARC select HAVE_OPROFILE select HAVE_ARCH_KGDB if !SMP select HAVE_ARCH_TRACEHOOK + select ARCH_WANT_OPTIONAL_GPIOLIB + select RTC_CLASS + select RTC_DRV_M48T59 # Identify this as a Sparc32 build config SPARC32 @@ -204,17 +214,6 @@ config SUN_PM Enable power management and CPU standby features on supported SPARC platforms. -config SUN4 - bool "Support for SUN4 machines (disables SUN4[CDM] support)" - depends on !SMP - default n - help - Say Y here if, and only if, your machine is a sun4. Note that - a kernel compiled with this option will run only on sun4. - (And the current version will probably work only on sun4/330.) - -if !SUN4 - config PCI bool "Support for PCI and PS/2 keyboard/mouse" help @@ -227,11 +226,6 @@ config PCI_SYSCALL source "drivers/pci/Kconfig" -endif - -config NO_DMA - def_bool !PCI - config SUN_OPENPROMFS tristate "Openprom tree appears in /proc/openprom" help @@ -263,9 +257,7 @@ source "net/Kconfig" source "drivers/Kconfig" -if !SUN4 source "drivers/sbus/char/Kconfig" -endif # This one must be before the filesystem configs. -DaveM diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index a5f0ce734ff..2d2769d766e 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -15,14 +15,11 @@ header-y += signal_32.h header-y += signal_64.h header-y += stat_32.h header-y += stat_64.h -header-y += statfs_32.h -header-y += statfs_64.h header-y += unistd_32.h header-y += unistd_64.h header-y += apc.h header-y += asi.h -header-y += bpp.h header-y += display7seg.h header-y += envctrl.h header-y += fbio.h @@ -41,5 +38,4 @@ header-y += reg_64.h header-y += traps.h header-y += uctx.h header-y += utrap.h -header-y += vfc_ioctls.h header-y += watchdog.h diff --git a/arch/sparc/include/asm/asmmacro.h b/arch/sparc/include/asm/asmmacro.h index a619a4d97aa..a995bf8aba3 100644 --- a/arch/sparc/include/asm/asmmacro.h +++ b/arch/sparc/include/asm/asmmacro.h @@ -34,12 +34,7 @@ /* sun4 probably wants half word accesses to ASI_SEGMAP, while sun4c+ likes byte accesses. These are to avoid ifdef mania. */ -#ifdef CONFIG_SUN4 -#define lduXa lduha -#define stXa stha -#else #define lduXa lduba #define stXa stba -#endif #endif /* !(_SPARC_ASMMACRO_H) */ diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h deleted file mode 100644 index 31f515e499a..00000000000 --- a/arch/sparc/include/asm/bpp.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _SPARC_BPP_H -#define _SPARC_BPP_H - -/* - * Copyright (c) 1995 Picture Elements - * Stephen Williams - * Gus Baldauf - * - * Linux/SPARC port by Peter Zaitcev. - * Integration into SPARC tree by Tom Dyas. - */ - -#include <linux/ioctl.h> - -/* - * This is a driver that supports IEEE Std 1284-1994 communications - * with compliant or compatible devices. It will use whatever features - * the device supports, prefering those that are typically faster. - * - * When the device is opened, it is left in COMPATIBILITY mode, and - * writes work like any printer device. The driver only attempt to - * negotiate 1284 modes when needed so that plugs can be pulled, - * switch boxes switched, etc., without disrupting things. It will - * also leave the device in compatibility mode when closed. - */ - - - -/* - * This driver also supplies ioctls to manually manipulate the - * pins. This is great for testing devices, or writing code to deal - * with bizzarro-mode of the ACME Special TurboThingy Plus. - * - * NOTE: These ioctl currently do not interact well with - * read/write. Caveat emptor. - * - * PUT_PINS allows us to assign the sense of all the pins, including - * the data pins if being driven by the host. The GET_PINS returns the - * pins that the peripheral drives, including data if appropriate. - */ - -# define BPP_PUT_PINS _IOW('B', 1, int) -# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */ -# define BPP_PUT_DATA _IOW('B', 3, int) -# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */ - -/* - * Set the data bus to input mode. Disengage the data bin driver and - * be prepared to read values from the peripheral. If the arg is 0, - * then revert the bus to output mode. - */ -# define BPP_SET_INPUT _IOW('B', 5, int) - -/* - * These bits apply to the PUT operation... - */ -# define BPP_PP_nStrobe 0x0001 -# define BPP_PP_nAutoFd 0x0002 -# define BPP_PP_nInit 0x0004 -# define BPP_PP_nSelectIn 0x0008 - -/* - * These apply to the GET operation, which also reads the current value - * of the previously put values. A bit mask of these will be returned - * as a bit mask in the return code of the ioctl(). - */ -# define BPP_GP_nAck 0x0100 -# define BPP_GP_Busy 0x0200 -# define BPP_GP_PError 0x0400 -# define BPP_GP_Select 0x0800 -# define BPP_GP_nFault 0x1000 - -#endif diff --git a/arch/sparc/include/asm/bugs.h b/arch/sparc/include/asm/bugs.h index e179bc12f64..61d86bbbe2b 100644 --- a/arch/sparc/include/asm/bugs.h +++ b/arch/sparc/include/asm/bugs.h @@ -7,10 +7,6 @@ #include <asm/cpudata.h> #endif -#ifdef CONFIG_SPARC64 -#include <asm/sstate.h> -#endif - extern unsigned long loops_per_jiffy; static void __init check_bugs(void) @@ -18,7 +14,4 @@ static void __init check_bugs(void) #if defined(CONFIG_SPARC32) && !defined(CONFIG_SMP) cpu_data(0).udelay_val = loops_per_jiffy; #endif -#ifdef CONFIG_SPARC64 - sstate_running(); -#endif } diff --git a/arch/sparc/include/asm/cpudata_64.h b/arch/sparc/include/asm/cpudata_64.h index 532975ecfe1..7da7c13d23c 100644 --- a/arch/sparc/include/asm/cpudata_64.h +++ b/arch/sparc/include/asm/cpudata_64.h @@ -86,7 +86,6 @@ extern struct trap_per_cpu trap_block[NR_CPUS]; extern void init_cur_cpu_trap(struct thread_info *); extern void setup_tba(void); extern int ncpus_probed; -extern void __init cpu_probe(void); extern const struct seq_operations cpuinfo_op; extern unsigned long real_hard_smp_processor_id(void); diff --git a/arch/sparc/include/asm/dma-mapping_32.h b/arch/sparc/include/asm/dma-mapping_32.h index f3a641e6b2c..8a57ea0573e 100644 --- a/arch/sparc/include/asm/dma-mapping_32.h +++ b/arch/sparc/include/asm/dma-mapping_32.h @@ -1,11 +1,60 @@ #ifndef _ASM_SPARC_DMA_MAPPING_H #define _ASM_SPARC_DMA_MAPPING_H +#include <linux/types.h> -#ifdef CONFIG_PCI -#include <asm-generic/dma-mapping.h> -#else -#include <asm-generic/dma-mapping-broken.h> -#endif /* PCI */ +struct device; +struct scatterlist; +struct page; + +#define DMA_ERROR_CODE (~(dma_addr_t)0x0) + +extern int dma_supported(struct device *dev, u64 mask); +extern int dma_set_mask(struct device *dev, u64 dma_mask); +extern void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag); +extern void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle); +extern dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, + enum dma_data_direction direction); +extern void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction); +extern dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction); +extern int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); +extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction); +extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction); +extern void dma_sync_single_for_device(struct device *dev, + dma_addr_t dma_handle, + size_t size, + enum dma_data_direction direction); +extern void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction); +extern void dma_sync_single_range_for_device(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction); +extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction); +extern void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction direction); +extern int dma_mapping_error(struct device *dev, dma_addr_t dma_addr); +extern int dma_get_cache_alignment(void); + +#define dma_alloc_noncoherent dma_alloc_coherent +#define dma_free_noncoherent dma_free_coherent #endif /* _ASM_SPARC_DMA_MAPPING_H */ diff --git a/arch/sparc/include/asm/dma.h b/arch/sparc/include/asm/dma.h index aa1d90ac04c..b554927bbaf 100644 --- a/arch/sparc/include/asm/dma.h +++ b/arch/sparc/include/asm/dma.h @@ -1,8 +1,139 @@ -#ifndef ___ASM_SPARC_DMA_H -#define ___ASM_SPARC_DMA_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/dma_64.h> +#ifndef _ASM_SPARC_DMA_H +#define _ASM_SPARC_DMA_H + +/* These are irrelevant for Sparc DMA, but we leave it in so that + * things can compile. + */ +#define MAX_DMA_CHANNELS 8 +#define DMA_MODE_READ 1 +#define DMA_MODE_WRITE 2 +#define MAX_DMA_ADDRESS (~0UL) + +/* Useful constants */ +#define SIZE_16MB (16*1024*1024) +#define SIZE_64K (64*1024) + +/* SBUS DMA controller reg offsets */ +#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ +#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ +#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ +#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ + +/* Fields in the cond_reg register */ +/* First, the version identification bits */ +#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ +#define DMA_VERS0 0x00000000 /* Sunray DMA version */ +#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ +#define DMA_VERS1 0x80000000 /* DMA rev 1 */ +#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ +#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ +#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ + +#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ +#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ +#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ +#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ +#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ +#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ +#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ +#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ +#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ +#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ +#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ +#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ +#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ +#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ +#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ +#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ +#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ +#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ +#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ +#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ +#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ +#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ +#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ +#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ +#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ +#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ +#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ +#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ +#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ +#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ +#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ +#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ +#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ +#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ +#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ +#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ +#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ +#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ +#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ +#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ +#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ + +/* Values describing the burst-size property from the PROM */ +#define DMA_BURST1 0x01 +#define DMA_BURST2 0x02 +#define DMA_BURST4 0x04 +#define DMA_BURST8 0x08 +#define DMA_BURST16 0x10 +#define DMA_BURST32 0x20 +#define DMA_BURST64 0x40 +#define DMA_BURSTBITS 0x7f + +/* From PCI */ + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; #else -#include <asm/dma_32.h> +#define isa_dma_bridge_buggy (0) #endif + +#ifdef CONFIG_SPARC32 + +/* Routines for data transfer buffers. */ +BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long) +BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long) + +#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len) +#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len) + +struct page; +struct device; +struct scatterlist; + +/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */ +BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, struct device *, char *, unsigned long) +BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct device *, struct scatterlist *, int) +BTFIXUPDEF_CALL(void, mmu_release_scsi_one, struct device *, __u32, unsigned long) +BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct device *, struct scatterlist *, int) + +#define mmu_get_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_get_scsi_one)(dev,vaddr,len) +#define mmu_get_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_get_scsi_sgl)(dev,sg,sz) +#define mmu_release_scsi_one(dev,vaddr,len) BTFIXUP_CALL(mmu_release_scsi_one)(dev,vaddr,len) +#define mmu_release_scsi_sgl(dev,sg,sz) BTFIXUP_CALL(mmu_release_scsi_sgl)(dev,sg,sz) + +/* + * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep. + * + * The mmu_map_dma_area establishes two mappings in one go. + * These mappings point to pages normally mapped at 'va' (linear address). + * First mapping is for CPU visible address at 'a', uncached. + * This is an alias, but it works because it is an uncached mapping. + * Second mapping is for device visible address, or "bus" address. + * The bus address is returned at '*pba'. + * + * These functions seem distinct, but are hard to split. On sun4c, + * at least for now, 'a' is equal to bus address, and retured in *pba. + * On sun4m, page attributes depend on the CPU type, so we have to + * know if we are mapping RAM or I/O, so it has to be an additional argument + * to a separate mapping function for CPU visible mappings. + */ +BTFIXUPDEF_CALL(int, mmu_map_dma_area, struct device *, dma_addr_t *, unsigned long, unsigned long, int len) +BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, struct device *, unsigned long busa, int len) + +#define mmu_map_dma_area(dev,pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(dev,pba,va,a,len) +#define mmu_unmap_dma_area(dev,ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(dev,ba,len) #endif + +#endif /* !(_ASM_SPARC_DMA_H) */ diff --git a/arch/sparc/include/asm/dma_32.h b/arch/sparc/include/asm/dma_32.h deleted file mode 100644 index cf7189c0079..00000000000 --- a/arch/sparc/include/asm/dma_32.h +++ /dev/null @@ -1,288 +0,0 @@ -/* include/asm/dma.h - * - * Copyright 1995 (C) David S. Miller (davem@davemloft.net) - */ - -#ifndef _ASM_SPARC_DMA_H -#define _ASM_SPARC_DMA_H - -#include <linux/kernel.h> -#include <linux/types.h> - -#include <asm/vac-ops.h> /* for invalidate's, etc. */ -#include <asm/sbus.h> -#include <asm/delay.h> -#include <asm/oplib.h> -#include <asm/system.h> -#include <asm/io.h> -#include <linux/spinlock.h> - -struct page; -extern spinlock_t dma_spin_lock; - -static inline unsigned long claim_dma_lock(void) -{ - unsigned long flags; - spin_lock_irqsave(&dma_spin_lock, flags); - return flags; -} - -static inline void release_dma_lock(unsigned long flags) -{ - spin_unlock_irqrestore(&dma_spin_lock, flags); -} - -/* These are irrelevant for Sparc DMA, but we leave it in so that - * things can compile. - */ -#define MAX_DMA_CHANNELS 8 -#define MAX_DMA_ADDRESS (~0UL) -#define DMA_MODE_READ 1 -#define DMA_MODE_WRITE 2 - -/* Useful constants */ -#define SIZE_16MB (16*1024*1024) -#define SIZE_64K (64*1024) - -/* SBUS DMA controller reg offsets */ -#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ -#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ -#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ -#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct sbus_dma { - struct sbus_dma *next; - struct sbus_dev *sdev; - void __iomem *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - unsigned long addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct sbus_dma *dma_chain; - -/* Broken hardware... */ -#ifdef CONFIG_SUN4 -/* Have to sort this out. Does rev0 work fine on sun4[cmd] without isbroken? - * Or is rev0 present only on sun4 boxes? -jj */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev0 || (dma)->revision == dvmarev1) -#else -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#endif -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Main routines in dma.c */ -extern void dvma_init(struct sbus_bus *); - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_RST_BPP DMA_RST_SCSI /* Reset the BPP controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ -#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ -#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x00080000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI/BPP: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI/BPP: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_BPP_ON DMA_SCSI_ON /* Enable BPP dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ -#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((((regs)->cond_reg) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((((regs)->cond_reg) & (DMA_HNDL_INTR | DMA_HNDL_ERROR))) -#define DMA_WRITE_P(regs) ((((regs)->cond_reg) & DMA_ST_WRITE)) -#define DMA_OFF(regs) ((((regs)->cond_reg) &= (~DMA_ENABLE))) -#define DMA_INTSOFF(regs) ((((regs)->cond_reg) &= (~DMA_INT_ENAB))) -#define DMA_INTSON(regs) ((((regs)->cond_reg) |= (DMA_INT_ENAB))) -#define DMA_PUNTFIFO(regs) ((((regs)->cond_reg) |= DMA_FIFO_INV)) -#define DMA_SETSTART(regs, addr) ((((regs)->st_addr) = (char *) addr)) -#define DMA_BEGINDMA_W(regs) \ - ((((regs)->cond_reg |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB)))) -#define DMA_BEGINDMA_R(regs) \ - ((((regs)->cond_reg |= ((DMA_ENABLE|DMA_INT_ENAB)&(~DMA_ST_WRITE))))) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -#if 0 /* P3 this stuff is inline in ledma.c:init_restart_ledma() */ -/* Pause until counter runs out or BIT isn't set in the DMA condition - * register. - */ -static inline void sparc_dma_pause(struct sparc_dma_registers *regs, - unsigned long bit) -{ - int ctr = 50000; /* Let's find some bugs ;) */ - - /* Busy wait until the bit is not set any more */ - while((regs->cond_reg&bit) && (ctr>0)) { - ctr--; - __delay(5); - } - - /* Check for bogus outcome. */ - if(!ctr) - panic("DMA timeout"); -} - -/* Reset the friggin' thing... */ -#define DMA_RESET(dma) do { \ - struct sparc_dma_registers *regs = dma->regs; \ - /* Let the current FIFO drain itself */ \ - sparc_dma_pause(regs, (DMA_FIFO_ISDRAIN)); \ - /* Reset the logic */ \ - regs->cond_reg |= (DMA_RST_SCSI); /* assert */ \ - __delay(400); /* let the bits set ;) */ \ - regs->cond_reg &= ~(DMA_RST_SCSI); /* de-assert */ \ - sparc_dma_enable_interrupts(regs); /* Re-enable interrupts */ \ - /* Enable FAST transfers if available */ \ - if(dma->revision>dvmarev1) regs->cond_reg |= DMA_3CLKS; \ - dma->running = 0; \ -} while(0) -#endif - -#define for_each_dvma(dma) \ - for((dma) = dma_chain; (dma); (dma) = (dma)->next) - -extern int get_dma_list(char *); -extern int request_dma(unsigned int, __const__ char *); -extern void free_dma(unsigned int); - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -/* Routines for data transfer buffers. */ -BTFIXUPDEF_CALL(char *, mmu_lockarea, char *, unsigned long) -BTFIXUPDEF_CALL(void, mmu_unlockarea, char *, unsigned long) - -#define mmu_lockarea(vaddr,len) BTFIXUP_CALL(mmu_lockarea)(vaddr,len) -#define mmu_unlockarea(vaddr,len) BTFIXUP_CALL(mmu_unlockarea)(vaddr,len) - -/* These are implementations for sbus_map_sg/sbus_unmap_sg... collapse later */ -BTFIXUPDEF_CALL(__u32, mmu_get_scsi_one, char *, unsigned long, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_get_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_release_scsi_one, __u32, unsigned long, struct sbus_bus *sbus) -BTFIXUPDEF_CALL(void, mmu_release_scsi_sgl, struct scatterlist *, int, struct sbus_bus *sbus) - -#define mmu_get_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_get_scsi_one)(vaddr,len,sbus) -#define mmu_get_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_get_scsi_sgl)(sg,sz,sbus) -#define mmu_release_scsi_one(vaddr,len,sbus) BTFIXUP_CALL(mmu_release_scsi_one)(vaddr,len,sbus) -#define mmu_release_scsi_sgl(sg,sz,sbus) BTFIXUP_CALL(mmu_release_scsi_sgl)(sg,sz,sbus) - -/* - * mmu_map/unmap are provided by iommu/iounit; Invalid to call on IIep. - * - * The mmu_map_dma_area establishes two mappings in one go. - * These mappings point to pages normally mapped at 'va' (linear address). - * First mapping is for CPU visible address at 'a', uncached. - * This is an alias, but it works because it is an uncached mapping. - * Second mapping is for device visible address, or "bus" address. - * The bus address is returned at '*pba'. - * - * These functions seem distinct, but are hard to split. On sun4c, - * at least for now, 'a' is equal to bus address, and retured in *pba. - * On sun4m, page attributes depend on the CPU type, so we have to - * know if we are mapping RAM or I/O, so it has to be an additional argument - * to a separate mapping function for CPU visible mappings. - */ -BTFIXUPDEF_CALL(int, mmu_map_dma_area, dma_addr_t *, unsigned long, unsigned long, int len) -BTFIXUPDEF_CALL(struct page *, mmu_translate_dvma, unsigned long busa) -BTFIXUPDEF_CALL(void, mmu_unmap_dma_area, unsigned long busa, int len) - -#define mmu_map_dma_area(pba,va,a,len) BTFIXUP_CALL(mmu_map_dma_area)(pba,va,a,len) -#define mmu_unmap_dma_area(ba,len) BTFIXUP_CALL(mmu_unmap_dma_area)(ba,len) -#define mmu_translate_dvma(ba) BTFIXUP_CALL(mmu_translate_dvma)(ba) - -#endif /* !(_ASM_SPARC_DMA_H) */ diff --git a/arch/sparc/include/asm/dma_64.h b/arch/sparc/include/asm/dma_64.h deleted file mode 100644 index 46a8aecffc0..00000000000 --- a/arch/sparc/include/asm/dma_64.h +++ /dev/null @@ -1,205 +0,0 @@ -/* - * include/asm/dma.h - * - * Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _ASM_SPARC64_DMA_H -#define _ASM_SPARC64_DMA_H - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/spinlock.h> - -#include <asm/sbus.h> -#include <asm/delay.h> -#include <asm/oplib.h> - -/* These are irrelevant for Sparc DMA, but we leave it in so that - * things can compile. - */ -#define MAX_DMA_CHANNELS 8 -#define DMA_MODE_READ 1 -#define DMA_MODE_WRITE 2 -#define MAX_DMA_ADDRESS (~0UL) - -/* Useful constants */ -#define SIZE_16MB (16*1024*1024) -#define SIZE_64K (64*1024) - -/* SBUS DMA controller reg offsets */ -#define DMA_CSR 0x00UL /* rw DMA control/status register 0x00 */ -#define DMA_ADDR 0x04UL /* rw DMA transfer address register 0x04 */ -#define DMA_COUNT 0x08UL /* rw DMA transfer count register 0x08 */ -#define DMA_TEST 0x0cUL /* rw DMA test/debug register 0x0c */ - -/* DVMA chip revisions */ -enum dvma_rev { - dvmarev0, - dvmaesc1, - dvmarev1, - dvmarev2, - dvmarev3, - dvmarevplus, - dvmahme -}; - -#define DMA_HASCOUNT(rev) ((rev)==dvmaesc1) - -/* Linux DMA information structure, filled during probe. */ -struct sbus_dma { - struct sbus_dma *next; - struct sbus_dev *sdev; - void __iomem *regs; - - /* Status, misc info */ - int node; /* Prom node for this DMA device */ - int running; /* Are we doing DMA now? */ - int allocated; /* Are we "owned" by anyone yet? */ - - /* Transfer information. */ - u32 addr; /* Start address of current transfer */ - int nbytes; /* Size of current transfer */ - int realbytes; /* For splitting up large transfers, etc. */ - - /* DMA revision */ - enum dvma_rev revision; -}; - -extern struct sbus_dma *dma_chain; - -/* Broken hardware... */ -#define DMA_ISBROKEN(dma) ((dma)->revision == dvmarev1) -#define DMA_ISESC1(dma) ((dma)->revision == dvmaesc1) - -/* Main routines in dma.c */ -extern void dvma_init(struct sbus_bus *); - -/* Fields in the cond_reg register */ -/* First, the version identification bits */ -#define DMA_DEVICE_ID 0xf0000000 /* Device identification bits */ -#define DMA_VERS0 0x00000000 /* Sunray DMA version */ -#define DMA_ESCV1 0x40000000 /* DMA ESC Version 1 */ -#define DMA_VERS1 0x80000000 /* DMA rev 1 */ -#define DMA_VERS2 0xa0000000 /* DMA rev 2 */ -#define DMA_VERHME 0xb0000000 /* DMA hme gate array */ -#define DMA_VERSPLUS 0x90000000 /* DMA rev 1 PLUS */ - -#define DMA_HNDL_INTR 0x00000001 /* An IRQ needs to be handled */ -#define DMA_HNDL_ERROR 0x00000002 /* We need to take an error */ -#define DMA_FIFO_ISDRAIN 0x0000000c /* The DMA FIFO is draining */ -#define DMA_INT_ENAB 0x00000010 /* Turn on interrupts */ -#define DMA_FIFO_INV 0x00000020 /* Invalidate the FIFO */ -#define DMA_ACC_SZ_ERR 0x00000040 /* The access size was bad */ -#define DMA_FIFO_STDRAIN 0x00000040 /* DMA_VERS1 Drain the FIFO */ -#define DMA_RST_SCSI 0x00000080 /* Reset the SCSI controller */ -#define DMA_RST_ENET DMA_RST_SCSI /* Reset the ENET controller */ -#define DMA_ST_WRITE 0x00000100 /* write from device to memory */ -#define DMA_ENABLE 0x00000200 /* Fire up DMA, handle requests */ -#define DMA_PEND_READ 0x00000400 /* DMA_VERS1/0/PLUS Pending Read */ -#define DMA_ESC_BURST 0x00000800 /* 1=16byte 0=32byte */ -#define DMA_READ_AHEAD 0x00001800 /* DMA read ahead partial longword */ -#define DMA_DSBL_RD_DRN 0x00001000 /* No EC drain on slave reads */ -#define DMA_BCNT_ENAB 0x00002000 /* If on, use the byte counter */ -#define DMA_TERM_CNTR 0x00004000 /* Terminal counter */ -#define DMA_SCSI_SBUS64 0x00008000 /* HME: Enable 64-bit SBUS mode. */ -#define DMA_CSR_DISAB 0x00010000 /* No FIFO drains during csr */ -#define DMA_SCSI_DISAB 0x00020000 /* No FIFO drains during reg */ -#define DMA_DSBL_WR_INV 0x00020000 /* No EC inval. on slave writes */ -#define DMA_ADD_ENABLE 0x00040000 /* Special ESC DVMA optimization */ -#define DMA_E_BURSTS 0x000c0000 /* ENET: SBUS r/w burst mask */ -#define DMA_E_BURST32 0x00040000 /* ENET: SBUS 32 byte r/w burst */ -#define DMA_E_BURST16 0x00000000 /* ENET: SBUS 16 byte r/w burst */ -#define DMA_BRST_SZ 0x000c0000 /* SCSI: SBUS r/w burst size */ -#define DMA_BRST64 0x000c0000 /* SCSI: 64byte bursts (HME on UltraSparc only) */ -#define DMA_BRST32 0x00040000 /* SCSI: 32byte bursts */ -#define DMA_BRST16 0x00000000 /* SCSI: 16byte bursts */ -#define DMA_BRST0 0x00080000 /* SCSI: no bursts (non-HME gate arrays) */ -#define DMA_ADDR_DISAB 0x00100000 /* No FIFO drains during addr */ -#define DMA_2CLKS 0x00200000 /* Each transfer = 2 clock ticks */ -#define DMA_3CLKS 0x00400000 /* Each transfer = 3 clock ticks */ -#define DMA_EN_ENETAUI DMA_3CLKS /* Put lance into AUI-cable mode */ -#define DMA_CNTR_DISAB 0x00800000 /* No IRQ when DMA_TERM_CNTR set */ -#define DMA_AUTO_NADDR 0x01000000 /* Use "auto nxt addr" feature */ -#define DMA_SCSI_ON 0x02000000 /* Enable SCSI dma */ -#define DMA_PARITY_OFF 0x02000000 /* HME: disable parity checking */ -#define DMA_LOADED_ADDR 0x04000000 /* Address has been loaded */ -#define DMA_LOADED_NADDR 0x08000000 /* Next address has been loaded */ -#define DMA_RESET_FAS366 0x08000000 /* HME: Assert RESET to FAS366 */ - -/* Values describing the burst-size property from the PROM */ -#define DMA_BURST1 0x01 -#define DMA_BURST2 0x02 -#define DMA_BURST4 0x04 -#define DMA_BURST8 0x08 -#define DMA_BURST16 0x10 -#define DMA_BURST32 0x20 -#define DMA_BURST64 0x40 -#define DMA_BURSTBITS 0x7f - -/* Determine highest possible final transfer address given a base */ -#define DMA_MAXEND(addr) (0x01000000UL-(((unsigned long)(addr))&0x00ffffffUL)) - -/* Yes, I hack a lot of elisp in my spare time... */ -#define DMA_ERROR_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_HNDL_ERROR)) -#define DMA_IRQ_P(regs) ((sbus_readl((regs) + DMA_CSR)) & (DMA_HNDL_INTR | DMA_HNDL_ERROR)) -#define DMA_WRITE_P(regs) ((sbus_readl((regs) + DMA_CSR) & DMA_ST_WRITE)) -#define DMA_OFF(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp &= ~DMA_ENABLE; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_INTSOFF(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp &= ~DMA_INT_ENAB; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_INTSON(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= DMA_INT_ENAB; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_PUNTFIFO(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= DMA_FIFO_INV; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_SETSTART(__regs, __addr) \ - sbus_writel((u32)(__addr), (__regs) + DMA_ADDR); -#define DMA_BEGINDMA_W(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= (DMA_ST_WRITE|DMA_ENABLE|DMA_INT_ENAB); \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) -#define DMA_BEGINDMA_R(__regs) \ -do { u32 tmp = sbus_readl((__regs) + DMA_CSR); \ - tmp |= (DMA_ENABLE|DMA_INT_ENAB); \ - tmp &= ~DMA_ST_WRITE; \ - sbus_writel(tmp, (__regs) + DMA_CSR); \ -} while(0) - -/* For certain DMA chips, we need to disable ints upon irq entry - * and turn them back on when we are done. So in any ESP interrupt - * handler you *must* call DMA_IRQ_ENTRY upon entry and DMA_IRQ_EXIT - * when leaving the handler. You have been warned... - */ -#define DMA_IRQ_ENTRY(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSOFF(dregs); \ - } while (0) - -#define DMA_IRQ_EXIT(dma, dregs) do { \ - if(DMA_ISBROKEN(dma)) DMA_INTSON(dregs); \ - } while(0) - -#define for_each_dvma(dma) \ - for((dma) = dma_chain; (dma); (dma) = (dma)->next) - -/* From PCI */ - -#ifdef CONFIG_PCI -extern int isa_dma_bridge_buggy; -#else -#define isa_dma_bridge_buggy (0) -#endif - -#endif /* !(_ASM_SPARC64_DMA_H) */ diff --git a/arch/sparc/include/asm/ebus.h b/arch/sparc/include/asm/ebus.h deleted file mode 100644 index 83a6d16c22e..00000000000 --- a/arch/sparc/include/asm/ebus.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef ___ASM_SPARC_EBUS_H -#define ___ASM_SPARC_EBUS_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/ebus_64.h> -#else -#include <asm/ebus_32.h> -#endif -#endif diff --git a/arch/sparc/include/asm/ebus_32.h b/arch/sparc/include/asm/ebus_32.h deleted file mode 100644 index f91f0b267ce..00000000000 --- a/arch/sparc/include/asm/ebus_32.h +++ /dev/null @@ -1,99 +0,0 @@ -/* - * ebus.h: PCI to Ebus pseudo driver software state. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adopted for sparc by V. Roganov and G. Raiko. - */ - -#ifndef __SPARC_EBUS_H -#define __SPARC_EBUS_H - -#ifndef _LINUX_IOPORT_H -#include <linux/ioport.h> -#endif -#include <linux/of_device.h> -#include <asm/oplib.h> -#include <asm/prom.h> - -struct linux_ebus_child { - struct linux_ebus_child *next; - struct linux_ebus_device *parent; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; - -struct linux_ebus_device { - struct of_device ofdev; - struct linux_ebus_device *next; - struct linux_ebus_child *children; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; -#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev) - -struct linux_ebus { - struct of_device ofdev; - struct linux_ebus *next; - struct linux_ebus_device *devices; - struct linux_pbm_info *parent; - struct pci_dev *self; - struct device_node *prom_node; -}; -#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev) - -struct linux_ebus_dma { - unsigned int dcsr; - unsigned int dacr; - unsigned int dbcr; -}; - -#define EBUS_DCSR_INT_PEND 0x00000001 -#define EBUS_DCSR_ERR_PEND 0x00000002 -#define EBUS_DCSR_DRAIN 0x00000004 -#define EBUS_DCSR_INT_EN 0x00000010 -#define EBUS_DCSR_RESET 0x00000080 -#define EBUS_DCSR_WRITE 0x00000100 -#define EBUS_DCSR_EN_DMA 0x00000200 -#define EBUS_DCSR_CYC_PEND 0x00000400 -#define EBUS_DCSR_DIAG_RD_DONE 0x00000800 -#define EBUS_DCSR_DIAG_WR_DONE 0x00001000 -#define EBUS_DCSR_EN_CNT 0x00002000 -#define EBUS_DCSR_TC 0x00004000 -#define EBUS_DCSR_DIS_CSR_DRN 0x00010000 -#define EBUS_DCSR_BURST_SZ_MASK 0x000c0000 -#define EBUS_DCSR_BURST_SZ_1 0x00080000 -#define EBUS_DCSR_BURST_SZ_4 0x00000000 -#define EBUS_DCSR_BURST_SZ_8 0x00040000 -#define EBUS_DCSR_BURST_SZ_16 0x000c0000 -#define EBUS_DCSR_DIAG_EN 0x00100000 -#define EBUS_DCSR_DIS_ERR_PEND 0x00400000 -#define EBUS_DCSR_TCI_DIS 0x00800000 -#define EBUS_DCSR_EN_NEXT 0x01000000 -#define EBUS_DCSR_DMA_ON 0x02000000 -#define EBUS_DCSR_A_LOADED 0x04000000 -#define EBUS_DCSR_NA_LOADED 0x08000000 -#define EBUS_DCSR_DEV_ID_MASK 0xf0000000 - -extern struct linux_ebus *ebus_chain; - -extern void ebus_init(void); - -#define for_each_ebus(bus) \ - for((bus) = ebus_chain; (bus); (bus) = (bus)->next) - -#define for_each_ebusdev(dev, bus) \ - for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) - -#define for_each_edevchild(dev, child) \ - for((child) = (dev)->children; (child); (child) = (child)->next) - -#endif /* !(__SPARC_EBUS_H) */ diff --git a/arch/sparc/include/asm/ebus_64.h b/arch/sparc/include/asm/ebus_64.h deleted file mode 100644 index 14c6a111f60..00000000000 --- a/arch/sparc/include/asm/ebus_64.h +++ /dev/null @@ -1,95 +0,0 @@ -/* - * ebus.h: PCI to Ebus pseudo driver software state. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * Copyright (C) 1999 David S. Miller (davem@redhat.com) - */ - -#ifndef __SPARC64_EBUS_H -#define __SPARC64_EBUS_H - -#include <linux/of_device.h> - -#include <asm/oplib.h> -#include <asm/prom.h> - -struct linux_ebus_child { - struct linux_ebus_child *next; - struct linux_ebus_device *parent; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; - -struct linux_ebus_device { - struct of_device ofdev; - struct linux_ebus_device *next; - struct linux_ebus_child *children; - struct linux_ebus *bus; - struct device_node *prom_node; - struct resource resource[PROMREG_MAX]; - int num_addrs; - unsigned int irqs[PROMINTR_MAX]; - int num_irqs; -}; -#define to_ebus_device(d) container_of(d, struct linux_ebus_device, ofdev.dev) - -struct linux_ebus { - struct of_device ofdev; - struct linux_ebus *next; - struct linux_ebus_device *devices; - struct pci_dev *self; - int index; - int is_rio; - struct device_node *prom_node; -}; -#define to_ebus(d) container_of(d, struct linux_ebus, ofdev.dev) - -struct ebus_dma_info { - spinlock_t lock; - void __iomem *regs; - - unsigned int flags; -#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER 0x00000001 -#define EBUS_DMA_FLAG_TCI_DISABLE 0x00000002 - - /* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is - * set. - */ - void (*callback)(struct ebus_dma_info *p, int event, void *cookie); - void *client_cookie; - unsigned int irq; -#define EBUS_DMA_EVENT_ERROR 1 -#define EBUS_DMA_EVENT_DMA 2 -#define EBUS_DMA_EVENT_DEVICE 4 - - unsigned char name[64]; -}; - -extern int ebus_dma_register(struct ebus_dma_info *p); -extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on); -extern void ebus_dma_unregister(struct ebus_dma_info *p); -extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, - size_t len); -extern void ebus_dma_prepare(struct ebus_dma_info *p, int write); -extern unsigned int ebus_dma_residue(struct ebus_dma_info *p); -extern unsigned int ebus_dma_addr(struct ebus_dma_info *p); -extern void ebus_dma_enable(struct ebus_dma_info *p, int on); - -extern struct linux_ebus *ebus_chain; - -extern void ebus_init(void); - -#define for_each_ebus(bus) \ - for((bus) = ebus_chain; (bus); (bus) = (bus)->next) - -#define for_each_ebusdev(dev, bus) \ - for((dev) = (bus)->devices; (dev); (dev) = (dev)->next) - -#define for_each_edevchild(dev, child) \ - for((child) = (dev)->children; (child); (child) = (child)->next) - -#endif /* !(__SPARC64_EBUS_H) */ diff --git a/arch/sparc/include/asm/ebus_dma.h b/arch/sparc/include/asm/ebus_dma.h new file mode 100644 index 00000000000..f07a5b541c9 --- /dev/null +++ b/arch/sparc/include/asm/ebus_dma.h @@ -0,0 +1,35 @@ +#ifndef __ASM_SPARC_EBUS_DMA_H +#define __ASM_SPARC_EBUS_DMA_H + +struct ebus_dma_info { + spinlock_t lock; + void __iomem *regs; + + unsigned int flags; +#define EBUS_DMA_FLAG_USE_EBDMA_HANDLER 0x00000001 +#define EBUS_DMA_FLAG_TCI_DISABLE 0x00000002 + + /* These are only valid is EBUS_DMA_FLAG_USE_EBDMA_HANDLER is + * set. + */ + void (*callback)(struct ebus_dma_info *p, int event, void *cookie); + void *client_cookie; + unsigned int irq; +#define EBUS_DMA_EVENT_ERROR 1 +#define EBUS_DMA_EVENT_DMA 2 +#define EBUS_DMA_EVENT_DEVICE 4 + + unsigned char name[64]; +}; + +extern int ebus_dma_register(struct ebus_dma_info *p); +extern int ebus_dma_irq_enable(struct ebus_dma_info *p, int on); +extern void ebus_dma_unregister(struct ebus_dma_info *p); +extern int ebus_dma_request(struct ebus_dma_info *p, dma_addr_t bus_addr, + size_t len); +extern void ebus_dma_prepare(struct ebus_dma_info *p, int write); +extern unsigned int ebus_dma_residue(struct ebus_dma_info *p); +extern unsigned int ebus_dma_addr(struct ebus_dma_info *p); +extern void ebus_dma_enable(struct ebus_dma_info *p, int on); + +#endif /* __ASM_SPARC_EBUS_DMA_H */ diff --git a/arch/sparc/include/asm/elf_32.h b/arch/sparc/include/asm/elf_32.h index d043f80bc2f..381a1b5256d 100644 --- a/arch/sparc/include/asm/elf_32.h +++ b/arch/sparc/include/asm/elf_32.h @@ -105,11 +105,8 @@ typedef struct { #define ELF_DATA ELFDATA2MSB #define USE_ELF_CORE_DUMP -#ifndef CONFIG_SUN4 + #define ELF_EXEC_PAGESIZE 4096 -#else -#define ELF_EXEC_PAGESIZE 8192 -#endif /* This is the location that an ET_DYN program is loaded if exec'ed. Typical @@ -126,7 +123,7 @@ typedef struct { /* Sun4c has none of the capabilities, most sun4m's have them all. * XXX This is gross, set some global variable at boot time. -DaveM */ -#define ELF_HWCAP ((ARCH_SUN4C_SUN4) ? 0 : \ +#define ELF_HWCAP ((ARCH_SUN4C) ? 0 : \ (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR | \ HWCAP_SPARC_SWAP | \ ((srmmu_modtype != Cypress && \ @@ -140,6 +137,6 @@ typedef struct { #define ELF_PLATFORM (NULL) -#define SET_PERSONALITY(ex, ibcs2) set_personality((ibcs2)?PER_SVR4:PER_LINUX) +#define SET_PERSONALITY(ex) set_personality(PER_LINUX) #endif /* !(__ASMSPARC_ELF_H) */ diff --git a/arch/sparc/include/asm/elf_64.h b/arch/sparc/include/asm/elf_64.h index 0818a1308f4..425c2f9be6d 100644 --- a/arch/sparc/include/asm/elf_64.h +++ b/arch/sparc/include/asm/elf_64.h @@ -195,7 +195,7 @@ static inline unsigned int sparc64_elf_hwcap(void) #define ELF_PLATFORM (NULL) -#define SET_PERSONALITY(ex, ibcs2) \ +#define SET_PERSONALITY(ex) \ do { unsigned long new_flags = current_thread_info()->flags; \ new_flags &= _TIF_32BIT; \ if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ @@ -208,9 +208,7 @@ do { unsigned long new_flags = current_thread_info()->flags; \ else \ clear_thread_flag(TIF_ABI_PENDING); \ /* flush_thread will update pgd cache */ \ - if (ibcs2) \ - set_personality(PER_SVR4); \ - else if (current->personality != PER_LINUX32) \ + if (current->personality != PER_LINUX32) \ set_personality(PER_LINUX); \ } while (0) diff --git a/arch/sparc/include/asm/fhc.h b/arch/sparc/include/asm/fhc.h index 788cbc46a11..57f1b303ad5 100644 --- a/arch/sparc/include/asm/fhc.h +++ b/arch/sparc/include/asm/fhc.h @@ -1,5 +1,4 @@ -/* - * fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire. +/* fhc.h: FHC and Clock board register definitions. * * Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com) */ @@ -7,14 +6,6 @@ #ifndef _SPARC64_FHC_H #define _SPARC64_FHC_H -#include <linux/timer.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/upa.h> - -struct linux_fhc; - /* Clock board register offsets. */ #define CLOCK_CTRL 0x00UL /* Main control */ #define CLOCK_STAT1 0x10UL /* Status one */ @@ -29,21 +20,7 @@ struct linux_fhc; #define CLOCK_CTRL_MLED 0x02 /* Mid LED, 1 == on */ #define CLOCK_CTRL_RLED 0x01 /* RIght LED, 1 == on */ -struct linux_central { - struct linux_fhc *child; - unsigned long cfreg; - unsigned long clkregs; - unsigned long clkver; - int slots; - struct device_node *prom_node; - - struct linux_prom_ranges central_ranges[PROMREG_MAX]; - int num_central_ranges; -}; - /* Firehose controller register offsets */ -struct fhc_regs { - unsigned long pregs; /* FHC internal regs */ #define FHC_PREGS_ID 0x00UL /* FHC ID */ #define FHC_ID_VERS 0xf0000000 /* Version of this FHC */ #define FHC_ID_PARTID 0x0ffff000 /* Part ID code (0x0f9f == FHC) */ @@ -90,32 +67,14 @@ struct fhc_regs { #define FHC_JTAG_CTRL_MENAB 0x80000000 /* Indicates this is JTAG Master */ #define FHC_JTAG_CTRL_MNONE 0x40000000 /* Indicates no JTAG Master present */ #define FHC_PREGS_JCMD 0x100UL /* FHC JTAG Command Register */ - unsigned long ireg; /* FHC IGN reg */ #define FHC_IREG_IGN 0x00UL /* This FHC's IGN */ - unsigned long ffregs; /* FHC fanfail regs */ #define FHC_FFREGS_IMAP 0x00UL /* FHC Fanfail IMAP */ #define FHC_FFREGS_ICLR 0x10UL /* FHC Fanfail ICLR */ - unsigned long sregs; /* FHC system regs */ #define FHC_SREGS_IMAP 0x00UL /* FHC System IMAP */ #define FHC_SREGS_ICLR 0x10UL /* FHC System ICLR */ - unsigned long uregs; /* FHC uart regs */ #define FHC_UREGS_IMAP 0x00UL /* FHC Uart IMAP */ #define FHC_UREGS_ICLR 0x10UL /* FHC Uart ICLR */ - unsigned long tregs; /* FHC TOD regs */ #define FHC_TREGS_IMAP 0x00UL /* FHC TOD IMAP */ #define FHC_TREGS_ICLR 0x10UL /* FHC TOD ICLR */ -}; - -struct linux_fhc { - struct linux_fhc *next; - struct linux_central *parent; /* NULL if not central FHC */ - struct fhc_regs fhc_regs; - int board; - int jtag_master; - struct device_node *prom_node; - - struct linux_prom_ranges fhc_ranges[PROMREG_MAX]; - int num_fhc_ranges; -}; #endif /* !(_SPARC64_FHC_H) */ diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h index ae3f00bf22f..c792830636d 100644 --- a/arch/sparc/include/asm/floppy_32.h +++ b/arch/sparc/include/asm/floppy_32.h @@ -6,6 +6,9 @@ #ifndef __ASM_SPARC_FLOPPY_H #define __ASM_SPARC_FLOPPY_H +#include <linux/of.h> +#include <linux/of_device.h> + #include <asm/page.h> #include <asm/pgtable.h> #include <asm/system.h> @@ -343,7 +346,7 @@ static int sun_floppy_init(void) r.flags = fd_regs[0].which_io; r.start = fd_regs[0].phys_addr; sun_fdc = (struct sun_flpy_controller *) - sbus_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); + of_ioremap(&r, 0, fd_regs[0].reg_size, "floppy"); /* Last minute sanity check... */ if(sun_fdc->status_82072 == 0xff) { @@ -385,4 +388,15 @@ static int sparc_eject(void) #define EXTRA_FLOPPY_PARAMS +static DEFINE_SPINLOCK(dma_spin_lock); + +#define claim_dma_lock() \ +({ unsigned long flags; \ + spin_lock_irqsave(&dma_spin_lock, flags); \ + flags; \ +}) + +#define release_dma_lock(__flags) \ + spin_unlock_irqrestore(&dma_spin_lock, __flags); + #endif /* !(__ASM_SPARC_FLOPPY_H) */ diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h index c39db1060bc..36439d67ad7 100644 --- a/arch/sparc/include/asm/floppy_64.h +++ b/arch/sparc/include/asm/floppy_64.h @@ -1,6 +1,6 @@ /* floppy.h: Sparc specific parts of the Floppy driver. * - * Copyright (C) 1996, 2007 David S. Miller (davem@davemloft.net) + * Copyright (C) 1996, 2007, 2008 David S. Miller (davem@davemloft.net) * Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz) * * Ultra/PCI support added: Sep 1997 Eddie C. Dost (ecd@skynet.be) @@ -9,18 +9,11 @@ #ifndef __ASM_SPARC64_FLOPPY_H #define __ASM_SPARC64_FLOPPY_H -#include <linux/init.h> -#include <linux/pci.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/dma-mapping.h> -#include <asm/page.h> -#include <asm/pgtable.h> -#include <asm/system.h> -#include <asm/idprom.h> -#include <asm/oplib.h> #include <asm/auxio.h> -#include <asm/sbus.h> -#include <asm/irq.h> - /* * Define this to enable exchanging drive 0 and 1 if only drive 1 is @@ -50,7 +43,7 @@ struct sun_flpy_controller { /* You'll only ever find one controller on an Ultra anyways. */ static struct sun_flpy_controller *sun_fdc = (struct sun_flpy_controller *)-1; unsigned long fdc_status; -static struct sbus_dev *floppy_sdev = NULL; +static struct of_device *floppy_op = NULL; struct sun_floppy_ops { unsigned char (*fd_inb) (unsigned long port); @@ -291,12 +284,11 @@ static int sun_fd_eject(int drive) return 0; } -#ifdef CONFIG_PCI -#include <asm/ebus.h> +#include <asm/ebus_dma.h> #include <asm/ns87303.h> static struct ebus_dma_info sun_pci_fd_ebus_dma; -static struct pci_dev *sun_pci_ebus_dev; +static struct device *sun_floppy_dev; static int sun_pci_broken_drive = -1; struct sun_pci_dma_op { @@ -377,7 +369,7 @@ static void sun_pci_fd_enable_dma(void) sun_pci_dma_pending.addr = -1U; sun_pci_dma_current.addr = - pci_map_single(sun_pci_ebus_dev, + dma_map_single(sun_floppy_dev, sun_pci_dma_current.buf, sun_pci_dma_current.len, sun_pci_dma_current.direction); @@ -394,7 +386,7 @@ static void sun_pci_fd_disable_dma(void) { ebus_dma_enable(&sun_pci_fd_ebus_dma, 0); if (sun_pci_dma_current.addr != -1U) - pci_unmap_single(sun_pci_ebus_dev, + dma_unmap_single(sun_floppy_dev, sun_pci_dma_current.addr, sun_pci_dma_current.len, sun_pci_dma_current.direction); @@ -404,9 +396,9 @@ static void sun_pci_fd_disable_dma(void) static void sun_pci_fd_set_dma_mode(int mode) { if (mode == DMA_MODE_WRITE) - sun_pci_dma_pending.direction = PCI_DMA_TODEVICE; + sun_pci_dma_pending.direction = DMA_TO_DEVICE; else - sun_pci_dma_pending.direction = PCI_DMA_FROMDEVICE; + sun_pci_dma_pending.direction = DMA_FROM_DEVICE; ebus_dma_prepare(&sun_pci_fd_ebus_dma, mode != DMA_MODE_WRITE); } @@ -538,80 +530,84 @@ static int sun_pci_fd_test_drive(unsigned long port, int drive) #undef MSR #undef DOR -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCI -static int __init ebus_fdthree_p(struct linux_ebus_device *edev) +static int __init ebus_fdthree_p(struct device_node *dp) { - if (!strcmp(edev->prom_node->name, "fdthree")) + if (!strcmp(dp->name, "fdthree")) return 1; - if (!strcmp(edev->prom_node->name, "floppy")) { + if (!strcmp(dp->name, "floppy")) { const char *compat; - compat = of_get_property(edev->prom_node, - "compatible", NULL); + compat = of_get_property(dp, "compatible", NULL); if (compat && !strcmp(compat, "fdthree")) return 1; } return 0; } -#endif static unsigned long __init sun_floppy_init(void) { - char state[128]; - struct sbus_bus *bus; - struct sbus_dev *sdev = NULL; static int initialized = 0; + struct device_node *dp; + struct of_device *op; + const char *prop; + char state[128]; if (initialized) return sun_floppy_types[0]; initialized = 1; - for_all_sbusdev (sdev, bus) { - if (!strcmp(sdev->prom_name, "SUNW,fdtwo")) + op = NULL; + + for_each_node_by_name(dp, "SUNW,fdtwo") { + if (strcmp(dp->parent->name, "sbus")) + continue; + op = of_find_device_by_node(dp); + if (op) break; } - if(sdev) { - floppy_sdev = sdev; - FLOPPY_IRQ = sdev->irqs[0]; + if (op) { + floppy_op = op; + FLOPPY_IRQ = op->irqs[0]; } else { -#ifdef CONFIG_PCI - struct linux_ebus *ebus; - struct linux_ebus_device *edev = NULL; - unsigned long config = 0; + struct device_node *ebus_dp; void __iomem *auxio_reg; const char *state_prop; + unsigned long config; - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (ebus_fdthree_p(edev)) - goto ebus_done; + dp = NULL; + for_each_node_by_name(ebus_dp, "ebus") { + for (dp = ebus_dp->child; dp; dp = dp->sibling) { + if (ebus_fdthree_p(dp)) + goto found_fdthree; } } - ebus_done: - if (!edev) + found_fdthree: + if (!dp) + return 0; + + op = of_find_device_by_node(dp); + if (!op) return 0; - state_prop = of_get_property(edev->prom_node, "status", NULL); + state_prop = of_get_property(op->node, "status", NULL); if (state_prop && !strncmp(state_prop, "disabled", 8)) return 0; - FLOPPY_IRQ = edev->irqs[0]; + FLOPPY_IRQ = op->irqs[0]; /* Make sure the high density bit is set, some systems * (most notably Ultra5/Ultra10) come up with it clear. */ - auxio_reg = (void __iomem *) edev->resource[2].start; + auxio_reg = (void __iomem *) op->resource[2].start; writel(readl(auxio_reg)|0x2, auxio_reg); - sun_pci_ebus_dev = ebus->self; + sun_floppy_dev = &op->dev; spin_lock_init(&sun_pci_fd_ebus_dma.lock); /* XXX ioremap */ sun_pci_fd_ebus_dma.regs = (void __iomem *) - edev->resource[1].start; + op->resource[1].start; if (!sun_pci_fd_ebus_dma.regs) return 0; @@ -625,7 +621,7 @@ static unsigned long __init sun_floppy_init(void) return 0; /* XXX ioremap */ - sun_fdc = (struct sun_flpy_controller *)edev->resource[0].start; + sun_fdc = (struct sun_flpy_controller *) op->resource[0].start; sun_fdops.fd_inb = sun_pci_fd_inb; sun_fdops.fd_outb = sun_pci_fd_outb; @@ -662,12 +658,15 @@ static unsigned long __init sun_floppy_init(void) /* * Find NS87303 SuperIO config registers (through ecpp). */ - for_each_ebus(ebus) { - for_each_ebusdev(edev, ebus) { - if (!strcmp(edev->prom_node->name, "ecpp")) { - config = edev->resource[1].start; - goto config_done; - } + config = 0; + for (dp = ebus_dp->child; dp; dp = dp->sibling) { + if (!strcmp(dp->name, "ecpp")) { + struct of_device *ecpp_op; + + ecpp_op = of_find_device_by_node(dp); + if (ecpp_op) + config = ecpp_op->resource[1].start; + goto config_done; } } config_done: @@ -716,26 +715,23 @@ static unsigned long __init sun_floppy_init(void) #endif /* PCI_FDC_SWAP_DRIVES */ return sun_floppy_types[0]; -#else - return 0; -#endif } - prom_getproperty(sdev->prom_node, "status", state, sizeof(state)); - if(!strncmp(state, "disabled", 8)) + prop = of_get_property(op->node, "status", NULL); + if (prop && !strncmp(state, "disabled", 8)) return 0; /* - * We cannot do sbus_ioremap here: it does request_region, + * We cannot do of_ioremap here: it does request_region, * which the generic floppy driver tries to do once again. * But we must use the sdev resource values as they have * had parent ranges applied. */ sun_fdc = (struct sun_flpy_controller *) - (sdev->resource[0].start + - ((sdev->resource[0].flags & 0x1ffUL) << 32UL)); + (op->resource[0].start + + ((op->resource[0].flags & 0x1ffUL) << 32UL)); /* Last minute sanity check... */ - if(sbus_readb(&sun_fdc->status1_82077) == 0xff) { + if (sbus_readb(&sun_fdc->status1_82077) == 0xff) { sun_fdc = (struct sun_flpy_controller *)-1; return 0; } diff --git a/arch/sparc/include/asm/gpio.h b/arch/sparc/include/asm/gpio.h new file mode 100644 index 00000000000..a0e3ac0af59 --- /dev/null +++ b/arch/sparc/include/asm/gpio.h @@ -0,0 +1,36 @@ +#ifndef __ASM_SPARC_GPIO_H +#define __ASM_SPARC_GPIO_H + +#include <linux/errno.h> +#include <asm-generic/gpio.h> + +#ifdef CONFIG_GPIOLIB + +static inline int gpio_get_value(unsigned int gpio) +{ + return __gpio_get_value(gpio); +} + +static inline void gpio_set_value(unsigned int gpio, int value) +{ + __gpio_set_value(gpio, value); +} + +static inline int gpio_cansleep(unsigned int gpio) +{ + return __gpio_cansleep(gpio); +} + +static inline int gpio_to_irq(unsigned int gpio) +{ + return -ENOSYS; +} + +static inline int irq_to_gpio(unsigned int irq) +{ + return -EINVAL; +} + +#endif /* CONFIG_GPIOLIB */ + +#endif /* __ASM_SPARC_GPIO_H */ diff --git a/arch/sparc/include/asm/io-unit.h b/arch/sparc/include/asm/io-unit.h index 96823b47fd4..01ab2f613e9 100644 --- a/arch/sparc/include/asm/io-unit.h +++ b/arch/sparc/include/asm/io-unit.h @@ -55,8 +55,4 @@ struct iounit_struct { #define IOUNIT_BMAPM_START IOUNIT_BMAP2_END #define IOUNIT_BMAPM_END ((IOUNIT_DMA_SIZE - IOUNIT_DVMA_SIZE) >> PAGE_SHIFT) -extern __u32 iounit_map_dma_init(struct sbus_bus *, int); -#define iounit_map_dma_finish(sbus, addr, len) mmu_release_scsi_one(addr, len, sbus) -extern __u32 iounit_map_dma_page(__u32, void *, struct sbus_bus *); - #endif /* !(_SPARC_IO_UNIT_H) */ diff --git a/arch/sparc/include/asm/io_32.h b/arch/sparc/include/asm/io_32.h index 10d7da45007..93fe21e02c8 100644 --- a/arch/sparc/include/asm/io_32.h +++ b/arch/sparc/include/asm/io_32.h @@ -293,14 +293,6 @@ extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); extern void pci_iounmap(struct pci_dev *dev, void __iomem *); /* - * Bus number may be in res->flags... somewhere. - */ -extern void __iomem *sbus_ioremap(struct resource *res, unsigned long offset, - unsigned long size, char *name); -extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size); - - -/* * At the moment, we do not use CMOS_READ anywhere outside of rtc.c, * so rtc_port is static in it. This should not change unless a new * hardware pops up. @@ -308,6 +300,17 @@ extern void sbus_iounmap(volatile void __iomem *vaddr, unsigned long size); #define RTC_PORT(x) (rtc_port + (x)) #define RTC_ALWAYS_BCD 0 +static inline int sbus_can_dma_64bit(void) +{ + return 0; /* actually, sparc_cpu_model==sun4d */ +} +static inline int sbus_can_burst64(void) +{ + return 0; /* actually, sparc_cpu_model==sun4d */ +} +struct device; +extern void sbus_set_sbus64(struct device *, int); + #endif #define __ARCH_HAS_NO_PAGE_ZERO_MAPPED 1 diff --git a/arch/sparc/include/asm/io_64.h b/arch/sparc/include/asm/io_64.h index 0bff078ffdd..4aee21dc9c6 100644 --- a/arch/sparc/include/asm/io_64.h +++ b/arch/sparc/include/asm/io_64.h @@ -482,18 +482,16 @@ struct pci_dev; extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max); extern void pci_iounmap(struct pci_dev *dev, void __iomem *); -/* Similarly for SBUS. */ -#define sbus_ioremap(__res, __offset, __size, __name) \ -({ unsigned long __ret; \ - __ret = (__res)->start + (((__res)->flags & 0x1ffUL) << 32UL); \ - __ret += (unsigned long) (__offset); \ - if (! request_region((__ret), (__size), (__name))) \ - __ret = 0UL; \ - (void __iomem *) __ret; \ -}) - -#define sbus_iounmap(__addr, __size) \ - release_region((unsigned long)(__addr), (__size)) +static inline int sbus_can_dma_64bit(void) +{ + return 1; +} +static inline int sbus_can_burst64(void) +{ + return 1; +} +struct device; +extern void sbus_set_sbus64(struct device *, int); /* * Convert a physical pointer to a virtual kernel pointer for /dev/mem diff --git a/arch/sparc/include/asm/iommu_64.h b/arch/sparc/include/asm/iommu_64.h index d7b9afcba08..caf798b5619 100644 --- a/arch/sparc/include/asm/iommu_64.h +++ b/arch/sparc/include/asm/iommu_64.h @@ -48,6 +48,9 @@ struct strbuf { unsigned long strbuf_control; unsigned long strbuf_pflush; unsigned long strbuf_fsync; + unsigned long strbuf_err_stat; + unsigned long strbuf_tag_diag; + unsigned long strbuf_line_diag; unsigned long strbuf_ctxflush; unsigned long strbuf_ctxmatch_base; unsigned long strbuf_flushflag_pa; diff --git a/arch/sparc/include/asm/irq_64.h b/arch/sparc/include/asm/irq_64.h index e3dd9303643..71673eca366 100644 --- a/arch/sparc/include/asm/irq_64.h +++ b/arch/sparc/include/asm/irq_64.h @@ -56,7 +56,6 @@ extern unsigned int sun4u_build_msi(u32 portid, unsigned int *virt_irq_p, unsigned long imap_base, unsigned long iclr_base); extern void sun4u_destroy_msi(unsigned int virt_irq); -extern unsigned int sbus_build_irq(void *sbus, unsigned int ino); extern unsigned char virt_irq_alloc(unsigned int dev_handle, unsigned int dev_ino); diff --git a/arch/sparc/include/asm/mc146818rtc_64.h b/arch/sparc/include/asm/mc146818rtc_64.h index e9c0fcc25c6..7238d174e0e 100644 --- a/arch/sparc/include/asm/mc146818rtc_64.h +++ b/arch/sparc/include/asm/mc146818rtc_64.h @@ -7,12 +7,8 @@ #include <asm/io.h> #ifndef RTC_PORT -#ifdef CONFIG_PCI -extern unsigned long ds1287_regs; -#else -#define ds1287_regs (0UL) -#endif -#define RTC_PORT(x) (ds1287_regs + (x)) +extern unsigned long cmos_regs; +#define RTC_PORT(x) (cmos_regs + (x)) #define RTC_ALWAYS_BCD 0 #endif @@ -29,6 +25,4 @@ outb_p((addr),RTC_PORT(0)); \ outb_p((val),RTC_PORT(1)); \ }) -#define RTC_IRQ 8 - #endif /* __ASM_SPARC64_MC146818RTC_H */ diff --git a/arch/sparc/include/asm/memctrl.h b/arch/sparc/include/asm/memctrl.h new file mode 100644 index 00000000000..4065c56af7b --- /dev/null +++ b/arch/sparc/include/asm/memctrl.h @@ -0,0 +1,9 @@ +#ifndef _SPARC_MEMCTRL_H +#define _SPARC_MEMCTRL_H + +typedef int (*dimm_printer_t)(int synd_code, unsigned long paddr, char *buf, int buflen); + +int register_dimm_printer(dimm_printer_t func); +void unregister_dimm_printer(dimm_printer_t func); + +#endif /* _SPARC_MEMCTRL_H */ diff --git a/arch/sparc/include/asm/mostek.h b/arch/sparc/include/asm/mostek.h deleted file mode 100644 index 433be3e0a69..00000000000 --- a/arch/sparc/include/asm/mostek.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef ___ASM_SPARC_MOSTEK_H -#define ___ASM_SPARC_MOSTEK_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/mostek_64.h> -#else -#include <asm/mostek_32.h> -#endif -#endif diff --git a/arch/sparc/include/asm/mostek_32.h b/arch/sparc/include/asm/mostek_32.h deleted file mode 100644 index a99590c4c50..00000000000 --- a/arch/sparc/include/asm/mostek_32.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * mostek.h: Describes the various Mostek time of day clock registers. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - * Added intersil code 05/25/98 Chris Davis (cdavis@cois.on.ca) - */ - -#ifndef _SPARC_MOSTEK_H -#define _SPARC_MOSTEK_H - -#include <asm/idprom.h> -#include <asm/io.h> - -/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) - * - * Data - * Address Function - * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 - * 7ff - - - - - - - - Year 00-99 - * 7fe 0 0 0 - - - - - Month 01-12 - * 7fd 0 0 - - - - - - Date 01-31 - * 7fc 0 FT 0 0 0 - - - Day 01-07 - * 7fb KS 0 - - - - - - Hours 00-23 - * 7fa 0 - - - - - - - Minutes 00-59 - * 7f9 ST - - - - - - - Seconds 00-59 - * 7f8 W R S - - - - - Control - * - * * ST is STOP BIT - * * W is WRITE BIT - * * R is READ BIT - * * S is SIGN BIT - * * FT is FREQ TEST BIT - * * KS is KICK START BIT - */ - -/* The Mostek 48t02 real time clock and NVRAM chip. The registers - * other than the control register are in binary coded decimal. Some - * control bits also live outside the control register. - */ -#define mostek_read(_addr) readb(_addr) -#define mostek_write(_addr,_val) writeb(_val, _addr) -#define MOSTEK_EEPROM 0x0000UL -#define MOSTEK_IDPROM 0x07d8UL -#define MOSTEK_CREG 0x07f8UL -#define MOSTEK_SEC 0x07f9UL -#define MOSTEK_MIN 0x07faUL -#define MOSTEK_HOUR 0x07fbUL -#define MOSTEK_DOW 0x07fcUL -#define MOSTEK_DOM 0x07fdUL -#define MOSTEK_MONTH 0x07feUL -#define MOSTEK_YEAR 0x07ffUL - -struct mostek48t02 { - volatile char eeprom[2008]; /* This is the eeprom, don't touch! */ - struct idprom idprom; /* The idprom lives here. */ - volatile unsigned char creg; /* Control register */ - volatile unsigned char sec; /* Seconds (0-59) */ - volatile unsigned char min; /* Minutes (0-59) */ - volatile unsigned char hour; /* Hour (0-23) */ - volatile unsigned char dow; /* Day of the week (1-7) */ - volatile unsigned char dom; /* Day of the month (1-31) */ - volatile unsigned char month; /* Month of year (1-12) */ - volatile unsigned char year; /* Year (0-99) */ -}; - -extern spinlock_t mostek_lock; -extern void __iomem *mstk48t02_regs; - -/* Control register values. */ -#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ -#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ -#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ - -/* Control bits that live in the other registers. */ -#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ -#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ -#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ - -#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ -#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) - -/* Masks that define how much space each value takes up. */ -#define MSTK_SEC_MASK 0x7f -#define MSTK_MIN_MASK 0x7f -#define MSTK_HOUR_MASK 0x3f -#define MSTK_DOW_MASK 0x07 -#define MSTK_DOM_MASK 0x3f -#define MSTK_MONTH_MASK 0x1f -#define MSTK_YEAR_MASK 0xffU - -/* Binary coded decimal conversion macros. */ -#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) -#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) - -/* Generic register set and get macros for internal use. */ -#define MSTK_GET(regs,var,mask) (MSTK_REGVAL_TO_DECIMAL(((struct mostek48t02 *)regs)->var & MSTK_ ## mask ## _MASK)) -#define MSTK_SET(regs,var,value,mask) do { ((struct mostek48t02 *)regs)->var &= ~(MSTK_ ## mask ## _MASK); ((struct mostek48t02 *)regs)->var |= MSTK_DECIMAL_TO_REGVAL(value) & (MSTK_ ## mask ## _MASK); } while (0) - -/* Macros to make register access easier on our fingers. These give you - * the decimal value of the register requested if applicable. You pass - * the a pointer to a 'struct mostek48t02'. - */ -#define MSTK_REG_CREG(regs) (((struct mostek48t02 *)regs)->creg) -#define MSTK_REG_SEC(regs) MSTK_GET(regs,sec,SEC) -#define MSTK_REG_MIN(regs) MSTK_GET(regs,min,MIN) -#define MSTK_REG_HOUR(regs) MSTK_GET(regs,hour,HOUR) -#define MSTK_REG_DOW(regs) MSTK_GET(regs,dow,DOW) -#define MSTK_REG_DOM(regs) MSTK_GET(regs,dom,DOM) -#define MSTK_REG_MONTH(regs) MSTK_GET(regs,month,MONTH) -#define MSTK_REG_YEAR(regs) MSTK_GET(regs,year,YEAR) - -#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,sec,value,SEC) -#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,min,value,MIN) -#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,hour,value,HOUR) -#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,dow,value,DOW) -#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,dom,value,DOM) -#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,month,value,MONTH) -#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,year,value,YEAR) - - -/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the - * same (basically) layout of the 48t02 chip except for the extra - * NVRAM on board (8 KB against the 48t02's 2 KB). - */ -struct mostek48t08 { - char offset[6*1024]; /* Magic things may be here, who knows? */ - struct mostek48t02 regs; /* Here is what we are interested in. */ -}; - -#ifdef CONFIG_SUN4 -enum sparc_clock_type { MSTK48T02, MSTK48T08, \ -INTERSIL, MSTK_INVALID }; -#else -enum sparc_clock_type { MSTK48T02, MSTK48T08, \ -MSTK_INVALID }; -#endif - -#ifdef CONFIG_SUN4 -/* intersil on a sun 4/260 code data from harris doc */ -struct intersil_dt { - volatile unsigned char int_csec; - volatile unsigned char int_hour; - volatile unsigned char int_min; - volatile unsigned char int_sec; - volatile unsigned char int_month; - volatile unsigned char int_day; - volatile unsigned char int_year; - volatile unsigned char int_dow; -}; - -struct intersil { - struct intersil_dt clk; - struct intersil_dt cmp; - volatile unsigned char int_intr_reg; - volatile unsigned char int_cmd_reg; -}; - -#define INTERSIL_STOP 0x0 -#define INTERSIL_START 0x8 -#define INTERSIL_INTR_DISABLE 0x0 -#define INTERSIL_INTR_ENABLE 0x10 -#define INTERSIL_32K 0x0 -#define INTERSIL_NORMAL 0x0 -#define INTERSIL_24H 0x4 -#define INTERSIL_INT_100HZ 0x2 - -/* end of intersil info */ -#endif - -#endif /* !(_SPARC_MOSTEK_H) */ diff --git a/arch/sparc/include/asm/mostek_64.h b/arch/sparc/include/asm/mostek_64.h deleted file mode 100644 index c5652de2ace..00000000000 --- a/arch/sparc/include/asm/mostek_64.h +++ /dev/null @@ -1,143 +0,0 @@ -/* mostek.h: Describes the various Mostek time of day clock registers. - * - * Copyright (C) 1995 David S. Miller (davem@davemloft.net) - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - */ - -#ifndef _SPARC64_MOSTEK_H -#define _SPARC64_MOSTEK_H - -#include <asm/idprom.h> - -/* M48T02 Register Map (adapted from Sun NVRAM/Hostid FAQ) - * - * Data - * Address Function - * Bit 7 Bit 6 Bit 5 Bit 4Bit 3 Bit 2 Bit 1 Bit 0 - * 7ff - - - - - - - - Year 00-99 - * 7fe 0 0 0 - - - - - Month 01-12 - * 7fd 0 0 - - - - - - Date 01-31 - * 7fc 0 FT 0 0 0 - - - Day 01-07 - * 7fb KS 0 - - - - - - Hours 00-23 - * 7fa 0 - - - - - - - Minutes 00-59 - * 7f9 ST - - - - - - - Seconds 00-59 - * 7f8 W R S - - - - - Control - * - * * ST is STOP BIT - * * W is WRITE BIT - * * R is READ BIT - * * S is SIGN BIT - * * FT is FREQ TEST BIT - * * KS is KICK START BIT - */ - -/* The Mostek 48t02 real time clock and NVRAM chip. The registers - * other than the control register are in binary coded decimal. Some - * control bits also live outside the control register. - * - * We now deal with physical addresses for I/O to the chip. -DaveM - */ -static inline u8 mostek_read(void __iomem *addr) -{ - u8 ret; - - __asm__ __volatile__("lduba [%1] %2, %0" - : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); - return ret; -} - -static inline void mostek_write(void __iomem *addr, u8 val) -{ - __asm__ __volatile__("stba %0, [%1] %2" - : /* no outputs */ - : "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); -} - -#define MOSTEK_EEPROM 0x0000UL -#define MOSTEK_IDPROM 0x07d8UL -#define MOSTEK_CREG 0x07f8UL -#define MOSTEK_SEC 0x07f9UL -#define MOSTEK_MIN 0x07faUL -#define MOSTEK_HOUR 0x07fbUL -#define MOSTEK_DOW 0x07fcUL -#define MOSTEK_DOM 0x07fdUL -#define MOSTEK_MONTH 0x07feUL -#define MOSTEK_YEAR 0x07ffUL - -extern spinlock_t mostek_lock; -extern void __iomem *mstk48t02_regs; - -/* Control register values. */ -#define MSTK_CREG_WRITE 0x80 /* Must set this before placing values. */ -#define MSTK_CREG_READ 0x40 /* Stop updates to allow a clean read. */ -#define MSTK_CREG_SIGN 0x20 /* Slow/speed clock in calibration mode. */ - -/* Control bits that live in the other registers. */ -#define MSTK_STOP 0x80 /* Stop the clock oscillator. (sec) */ -#define MSTK_KICK_START 0x80 /* Kick start the clock chip. (hour) */ -#define MSTK_FREQ_TEST 0x40 /* Frequency test mode. (day) */ - -#define MSTK_YEAR_ZERO 1968 /* If year reg has zero, it is 1968. */ -#define MSTK_CVT_YEAR(yr) ((yr) + MSTK_YEAR_ZERO) - -/* Masks that define how much space each value takes up. */ -#define MSTK_SEC_MASK 0x7f -#define MSTK_MIN_MASK 0x7f -#define MSTK_HOUR_MASK 0x3f -#define MSTK_DOW_MASK 0x07 -#define MSTK_DOM_MASK 0x3f -#define MSTK_MONTH_MASK 0x1f -#define MSTK_YEAR_MASK 0xffU - -/* Binary coded decimal conversion macros. */ -#define MSTK_REGVAL_TO_DECIMAL(x) (((x) & 0x0F) + 0x0A * ((x) >> 0x04)) -#define MSTK_DECIMAL_TO_REGVAL(x) ((((x) / 0x0A) << 0x04) + ((x) % 0x0A)) - -/* Generic register set and get macros for internal use. */ -#define MSTK_GET(regs,name) \ - (MSTK_REGVAL_TO_DECIMAL(mostek_read(regs + MOSTEK_ ## name) & MSTK_ ## name ## _MASK)) -#define MSTK_SET(regs,name,value) \ -do { u8 __val = mostek_read(regs + MOSTEK_ ## name); \ - __val &= ~(MSTK_ ## name ## _MASK); \ - __val |= (MSTK_DECIMAL_TO_REGVAL(value) & \ - (MSTK_ ## name ## _MASK)); \ - mostek_write(regs + MOSTEK_ ## name, __val); \ -} while(0) - -/* Macros to make register access easier on our fingers. These give you - * the decimal value of the register requested if applicable. You pass - * the a pointer to a 'struct mostek48t02'. - */ -#define MSTK_REG_CREG(regs) (mostek_read((regs) + MOSTEK_CREG)) -#define MSTK_REG_SEC(regs) MSTK_GET(regs,SEC) -#define MSTK_REG_MIN(regs) MSTK_GET(regs,MIN) -#define MSTK_REG_HOUR(regs) MSTK_GET(regs,HOUR) -#define MSTK_REG_DOW(regs) MSTK_GET(regs,DOW) -#define MSTK_REG_DOM(regs) MSTK_GET(regs,DOM) -#define MSTK_REG_MONTH(regs) MSTK_GET(regs,MONTH) -#define MSTK_REG_YEAR(regs) MSTK_GET(regs,YEAR) - -#define MSTK_SET_REG_SEC(regs,value) MSTK_SET(regs,SEC,value) -#define MSTK_SET_REG_MIN(regs,value) MSTK_SET(regs,MIN,value) -#define MSTK_SET_REG_HOUR(regs,value) MSTK_SET(regs,HOUR,value) -#define MSTK_SET_REG_DOW(regs,value) MSTK_SET(regs,DOW,value) -#define MSTK_SET_REG_DOM(regs,value) MSTK_SET(regs,DOM,value) -#define MSTK_SET_REG_MONTH(regs,value) MSTK_SET(regs,MONTH,value) -#define MSTK_SET_REG_YEAR(regs,value) MSTK_SET(regs,YEAR,value) - - -/* The Mostek 48t08 clock chip. Found on Sun4m's I think. It has the - * same (basically) layout of the 48t02 chip except for the extra - * NVRAM on board (8 KB against the 48t02's 2 KB). - */ -#define MOSTEK_48T08_OFFSET 0x0000UL /* Lower NVRAM portions */ -#define MOSTEK_48T08_48T02 0x1800UL /* Offset to 48T02 chip */ - -/* SUN5 systems usually have 48t59 model clock chipsets. But we keep the older - * clock chip definitions around just in case. - */ -#define MOSTEK_48T59_OFFSET 0x0000UL /* Lower NVRAM portions */ -#define MOSTEK_48T59_48T02 0x1800UL /* Offset to 48T02 chip */ - -#endif /* !(_SPARC64_MOSTEK_H) */ diff --git a/arch/sparc/include/asm/obio.h b/arch/sparc/include/asm/obio.h index 1a7544ceb57..4ade0c8a2c7 100644 --- a/arch/sparc/include/asm/obio.h +++ b/arch/sparc/include/asm/obio.h @@ -155,17 +155,6 @@ static inline void bw_set_ctrl(int cpu, unsigned ctrl) "i" (ASI_M_CTL)); } -extern unsigned char cpu_leds[32]; - -static inline void show_leds(int cpuid) -{ - cpuid &= 0x1e; - __asm__ __volatile__ ("stba %0, [%1] %2" : : - "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), - "r" (ECSR_BASE(cpuid) | BB_LEDS), - "i" (ASI_M_CTL)); -} - static inline unsigned cc_get_ipen(void) { unsigned pending; diff --git a/arch/sparc/include/asm/of_device.h b/arch/sparc/include/asm/of_device.h index bba777a416d..a5d9811f969 100644 --- a/arch/sparc/include/asm/of_device.h +++ b/arch/sparc/include/asm/of_device.h @@ -30,6 +30,8 @@ struct of_device extern void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name); extern void of_iounmap(struct resource *res, void __iomem *base, unsigned long size); +extern void of_propagate_archdata(struct of_device *bus); + /* This is just here during the transition */ #include <linux/of_platform.h> diff --git a/arch/sparc/include/asm/of_platform.h b/arch/sparc/include/asm/of_platform.h index 2348ab90a57..90da99059f8 100644 --- a/arch/sparc/include/asm/of_platform.h +++ b/arch/sparc/include/asm/of_platform.h @@ -13,9 +13,6 @@ * */ -extern struct bus_type ebus_bus_type; -extern struct bus_type sbus_bus_type; - #define of_bus_type of_platform_bus_type /* for compatibility */ #endif diff --git a/arch/sparc/include/asm/oplib_32.h b/arch/sparc/include/asm/oplib_32.h index b2631da259e..699da05235c 100644 --- a/arch/sparc/include/asm/oplib_32.h +++ b/arch/sparc/include/asm/oplib_32.h @@ -21,7 +21,6 @@ enum prom_major_version { PROM_V2, /* sun4c and early sun4m V2 prom */ PROM_V3, /* sun4m and later, up to sun4d/sun4e machines V3 */ PROM_P1275, /* IEEE compliant ISA based Sun PROM, only sun4u */ - PROM_SUN4, /* Old sun4 proms are totally different, but we'll shoehorn it to make it fit */ }; extern enum prom_major_version prom_vers; diff --git a/arch/sparc/include/asm/page_32.h b/arch/sparc/include/asm/page_32.h index cf5fb70ca1c..d1806edc095 100644 --- a/arch/sparc/include/asm/page_32.h +++ b/arch/sparc/include/asm/page_32.h @@ -8,11 +8,8 @@ #ifndef _SPARC_PAGE_H #define _SPARC_PAGE_H -#ifdef CONFIG_SUN4 -#define PAGE_SHIFT 13 -#else #define PAGE_SHIFT 12 -#endif + #ifndef __ASSEMBLY__ /* I have my suspicions... -DaveM */ #define PAGE_SIZE (1UL << PAGE_SHIFT) diff --git a/arch/sparc/include/asm/page_64.h b/arch/sparc/include/asm/page_64.h index b579b910ef5..4274ed13ddb 100644 --- a/arch/sparc/include/asm/page_64.h +++ b/arch/sparc/include/asm/page_64.h @@ -38,6 +38,8 @@ #ifndef __ASSEMBLY__ +#define WANT_PAGE_VIRTUAL + extern void _clear_page(void *page); #define clear_page(X) _clear_page((void *)(X)) struct page; diff --git a/arch/sparc/include/asm/parport.h b/arch/sparc/include/asm/parport.h index d9830621c90..dff3f0253aa 100644 --- a/arch/sparc/include/asm/parport.h +++ b/arch/sparc/include/asm/parport.h @@ -8,7 +8,7 @@ #include <linux/of_device.h> -#include <asm/ebus.h> +#include <asm/ebus_dma.h> #include <asm/ns87303.h> #include <asm/prom.h> @@ -215,7 +215,7 @@ static int __devexit ecpp_remove(struct of_device *op) return 0; } -static struct of_device_id ecpp_match[] = { +static const struct of_device_id ecpp_match[] = { { .name = "ecpp", }, diff --git a/arch/sparc/include/asm/pci_32.h b/arch/sparc/include/asm/pci_32.h index 0ee949d220c..b41c4c19815 100644 --- a/arch/sparc/include/asm/pci_32.h +++ b/arch/sparc/include/asm/pci_32.h @@ -3,6 +3,8 @@ #ifdef __KERNEL__ +#include <linux/dma-mapping.h> + /* Can be used to override the logic in pci_scan_bus for skipping * already-configured bus numbers - to be used for buggy BIOSes * or architectures with incomplete PCI setup by the loader. diff --git a/arch/sparc/include/asm/pgtable_32.h b/arch/sparc/include/asm/pgtable_32.h index 08237fda887..e0cabe790ec 100644 --- a/arch/sparc/include/asm/pgtable_32.h +++ b/arch/sparc/include/asm/pgtable_32.h @@ -14,11 +14,7 @@ #include <linux/spinlock.h> #include <linux/swap.h> #include <asm/types.h> -#ifdef CONFIG_SUN4 -#include <asm/pgtsun4.h> -#else #include <asm/pgtsun4c.h> -#endif #include <asm/pgtsrmmu.h> #include <asm/vac-ops.h> #include <asm/oplib.h> diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index bb9ec2cce35..b049abf9902 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -770,6 +770,8 @@ extern void sun4v_patch_tlb_handlers(void); extern unsigned long cmdline_memory_size; +extern asmlinkage void do_sparc64_fault(struct pt_regs *regs); + #endif /* !(__ASSEMBLY__) */ #endif /* !(_SPARC64_PGTABLE_H) */ diff --git a/arch/sparc/include/asm/prom.h b/arch/sparc/include/asm/prom.h index fd55522481c..900d44714f8 100644 --- a/arch/sparc/include/asm/prom.h +++ b/arch/sparc/include/asm/prom.h @@ -18,6 +18,7 @@ */ #include <linux/types.h> #include <linux/proc_fs.h> +#include <linux/mutex.h> #include <asm/atomic.h> #define OF_ROOT_NODE_ADDR_CELLS_DEFAULT 2 @@ -73,6 +74,7 @@ struct of_irq_controller { extern struct device_node *of_find_node_by_cpuid(int cpuid); extern int of_set_property(struct device_node *node, const char *name, void *val, int len); +extern struct mutex of_set_property_mutex; extern int of_getintprop_default(struct device_node *np, const char *name, int def); @@ -94,6 +96,16 @@ static inline void of_node_put(struct device_node *node) { } +/* These routines are here to provide compatibility with how powerpc + * handles IRQ mapping for OF device nodes. We precompute and permanently + * register them in the of_device objects, whereas powerpc computes them + * on request. + */ +extern unsigned int irq_of_parse_and_map(struct device_node *node, int index); +static inline void irq_dispose_mapping(unsigned int virq) +{ +} + /* * NB: This is here while we transition from using asm/prom.h * to linux/of.h diff --git a/arch/sparc/include/asm/ptrace_64.h b/arch/sparc/include/asm/ptrace_64.h index 06e4914c13f..3d3e9c161d8 100644 --- a/arch/sparc/include/asm/ptrace_64.h +++ b/arch/sparc/include/asm/ptrace_64.h @@ -113,6 +113,8 @@ struct sparc_trapf { #ifdef __KERNEL__ +#include <linux/threads.h> + static inline int pt_regs_trap_type(struct pt_regs *regs) { return regs->magic & 0x1ff; @@ -138,6 +140,7 @@ struct global_reg_snapshot { struct thread_info *thread; unsigned long pad1; }; +extern struct global_reg_snapshot global_reg_snapshot[NR_CPUS]; #define __ARCH_WANT_COMPAT_SYS_PTRACE diff --git a/arch/sparc/include/asm/reboot.h b/arch/sparc/include/asm/reboot.h deleted file mode 100644 index 3f3f43f5be5..00000000000 --- a/arch/sparc/include/asm/reboot.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC64_REBOOT_H -#define _SPARC64_REBOOT_H - -extern void machine_alt_power_off(void); - -#endif /* _SPARC64_REBOOT_H */ diff --git a/arch/sparc/include/asm/rtc.h b/arch/sparc/include/asm/rtc.h deleted file mode 100644 index f9ecb1fe2ec..00000000000 --- a/arch/sparc/include/asm/rtc.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * rtc.h: Definitions for access to the Mostek real time clock - * - * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu) - */ - -#ifndef _RTC_H -#define _RTC_H - -#include <linux/ioctl.h> - -struct rtc_time -{ - int sec; /* Seconds (0-59) */ - int min; /* Minutes (0-59) */ - int hour; /* Hour (0-23) */ - int dow; /* Day of the week (1-7) */ - int dom; /* Day of the month (1-31) */ - int month; /* Month of year (1-12) */ - int year; /* Year (0-99) */ -}; - -#define RTCGET _IOR('p', 20, struct rtc_time) -#define RTCSET _IOW('p', 21, struct rtc_time) - -#endif diff --git a/arch/sparc/include/asm/sbus.h b/arch/sparc/include/asm/sbus.h deleted file mode 100644 index f82481ab44d..00000000000 --- a/arch/sparc/include/asm/sbus.h +++ /dev/null @@ -1,8 +0,0 @@ -#ifndef ___ASM_SPARC_SBUS_H -#define ___ASM_SPARC_SBUS_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/sbus_64.h> -#else -#include <asm/sbus_32.h> -#endif -#endif diff --git a/arch/sparc/include/asm/sbus_32.h b/arch/sparc/include/asm/sbus_32.h deleted file mode 100644 index a7b4fa21931..00000000000 --- a/arch/sparc/include/asm/sbus_32.h +++ /dev/null @@ -1,153 +0,0 @@ -/* - * sbus.h: Defines for the Sun SBus. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_SBUS_H -#define _SPARC_SBUS_H - -#include <linux/dma-mapping.h> -#include <linux/ioport.h> -#include <linux/of_device.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/scatterlist.h> - -/* We scan which devices are on the SBus using the PROM node device - * tree. SBus devices are described in two different ways. You can - * either get an absolute address at which to access the device, or - * you can get a SBus 'slot' number and an offset within that slot. - */ - -/* The base address at which to calculate device OBIO addresses. */ -#define SUN_SBUS_BVADDR 0xf8000000 -#define SBUS_OFF_MASK 0x01ffffff - -/* These routines are used to calculate device address from slot - * numbers + offsets, and vice versa. - */ - -static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) -{ - return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); -} - -static inline int sbus_dev_slot(unsigned long dev_addr) -{ - return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); -} - -struct sbus_bus; - -/* Linux SBUS device tables */ -struct sbus_dev { - struct of_device ofdev; - struct sbus_bus *bus; - struct sbus_dev *next; - struct sbus_dev *child; - struct sbus_dev *parent; - int prom_node; - char prom_name[64]; - int slot; - - struct resource resource[PROMREG_MAX]; - - struct linux_prom_registers reg_addrs[PROMREG_MAX]; - int num_registers; - - struct linux_prom_ranges device_ranges[PROMREG_MAX]; - int num_device_ranges; - - unsigned int irqs[4]; - int num_irqs; -}; -#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) - -/* This struct describes the SBus(s) found on this machine. */ -struct sbus_bus { - struct of_device ofdev; - struct sbus_dev *devices; /* Link to devices on this SBus */ - struct sbus_bus *next; /* next SBus, if more than one SBus */ - int prom_node; /* PROM device tree node for this SBus */ - char prom_name[64]; /* Usually "sbus" or "sbi" */ - int clock_freq; - - struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; - int num_sbus_ranges; - - int devid; - int board; -}; -#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) - -extern struct sbus_bus *sbus_root; - -static inline int -sbus_is_slave(struct sbus_dev *dev) -{ - /* XXX Have to write this for sun4c's */ - return 0; -} - -/* Device probing routines could find these handy */ -#define for_each_sbus(bus) \ - for((bus) = sbus_root; (bus); (bus)=(bus)->next) - -#define for_each_sbusdev(device, bus) \ - for((device) = (bus)->devices; (device); (device)=(device)->next) - -#define for_all_sbusdev(device, bus) \ - for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ - for ((device) = (bus)->devices; (device); (device) = (device)->next) - -/* Driver DVMA interfaces. */ -#define sbus_can_dma_64bit(sdev) (0) /* actually, sparc_cpu_model==sun4d */ -#define sbus_can_burst64(sdev) (0) /* actually, sparc_cpu_model==sun4d */ -extern void sbus_set_sbus64(struct sbus_dev *, int); -extern void sbus_fill_device_irq(struct sbus_dev *); - -/* These yield IOMMU mappings in consistent mode. */ -extern void *sbus_alloc_consistent(struct sbus_dev *, long, u32 *dma_addrp); -extern void sbus_free_consistent(struct sbus_dev *, long, void *, u32); -void prom_adjust_ranges(struct linux_prom_ranges *, int, - struct linux_prom_ranges *, int); - -#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL -#define SBUS_DMA_TODEVICE DMA_TO_DEVICE -#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE -#define SBUS_DMA_NONE DMA_NONE - -/* All the rest use streaming mode mappings. */ -extern dma_addr_t sbus_map_single(struct sbus_dev *, void *, size_t, int); -extern void sbus_unmap_single(struct sbus_dev *, dma_addr_t, size_t, int); -extern int sbus_map_sg(struct sbus_dev *, struct scatterlist *, int, int); -extern void sbus_unmap_sg(struct sbus_dev *, struct scatterlist *, int, int); - -/* Finally, allow explicit synchronization of streamable mappings. */ -extern void sbus_dma_sync_single_for_cpu(struct sbus_dev *, dma_addr_t, size_t, int); -#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu -extern void sbus_dma_sync_single_for_device(struct sbus_dev *, dma_addr_t, size_t, int); -extern void sbus_dma_sync_sg_for_cpu(struct sbus_dev *, struct scatterlist *, int, int); -#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu -extern void sbus_dma_sync_sg_for_device(struct sbus_dev *, struct scatterlist *, int, int); - -/* Eric Brower (ebrower@usa.net) - * Translate SBus interrupt levels to ino values-- - * this is used when converting sbus "interrupts" OBP - * node values to "intr" node values, and is platform - * dependent. If only we could call OBP with - * "sbus-intr>cpu (sbint -- ino)" from kernel... - * See .../drivers/sbus/sbus.c for details. - */ -BTFIXUPDEF_CALL(unsigned int, sbint_to_irq, struct sbus_dev *sdev, unsigned int) -#define sbint_to_irq(sdev, sbint) BTFIXUP_CALL(sbint_to_irq)(sdev, sbint) - -extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); -extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); -extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); -extern int sbus_arch_preinit(void); -extern void sbus_arch_postinit(void); - -#endif /* !(_SPARC_SBUS_H) */ diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h deleted file mode 100644 index b606c14343f..00000000000 --- a/arch/sparc/include/asm/sbus_64.h +++ /dev/null @@ -1,190 +0,0 @@ -/* sbus.h: Defines for the Sun SBus. - * - * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net) - */ - -#ifndef _SPARC64_SBUS_H -#define _SPARC64_SBUS_H - -#include <linux/dma-mapping.h> -#include <linux/ioport.h> -#include <linux/of_device.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/iommu.h> -#include <asm/scatterlist.h> - -/* We scan which devices are on the SBus using the PROM node device - * tree. SBus devices are described in two different ways. You can - * either get an absolute address at which to access the device, or - * you can get a SBus 'slot' number and an offset within that slot. - */ - -/* The base address at which to calculate device OBIO addresses. */ -#define SUN_SBUS_BVADDR 0x00000000 -#define SBUS_OFF_MASK 0x0fffffff - -/* These routines are used to calculate device address from slot - * numbers + offsets, and vice versa. - */ - -static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) -{ - return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset)); -} - -static inline int sbus_dev_slot(unsigned long dev_addr) -{ - return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28); -} - -struct sbus_bus; - -/* Linux SBUS device tables */ -struct sbus_dev { - struct of_device ofdev; - struct sbus_bus *bus; - struct sbus_dev *next; - struct sbus_dev *child; - struct sbus_dev *parent; - int prom_node; - char prom_name[64]; - int slot; - - struct resource resource[PROMREG_MAX]; - - struct linux_prom_registers reg_addrs[PROMREG_MAX]; - int num_registers; - - struct linux_prom_ranges device_ranges[PROMREG_MAX]; - int num_device_ranges; - - unsigned int irqs[4]; - int num_irqs; -}; -#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) - -/* This struct describes the SBus(s) found on this machine. */ -struct sbus_bus { - struct of_device ofdev; - struct sbus_dev *devices; /* Tree of SBUS devices */ - struct sbus_bus *next; /* Next SBUS in system */ - int prom_node; /* OBP node of SBUS */ - char prom_name[64]; /* Usually "sbus" or "sbi" */ - int clock_freq; - - struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; - int num_sbus_ranges; - - int portid; -}; -#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) - -extern struct sbus_bus *sbus_root; - -/* Device probing routines could find these handy */ -#define for_each_sbus(bus) \ - for((bus) = sbus_root; (bus); (bus)=(bus)->next) - -#define for_each_sbusdev(device, bus) \ - for((device) = (bus)->devices; (device); (device)=(device)->next) - -#define for_all_sbusdev(device, bus) \ - for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ - for ((device) = (bus)->devices; (device); (device) = (device)->next) - -/* Driver DVMA interfaces. */ -#define sbus_can_dma_64bit(sdev) (1) -#define sbus_can_burst64(sdev) (1) -extern void sbus_set_sbus64(struct sbus_dev *, int); -extern void sbus_fill_device_irq(struct sbus_dev *); - -static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size, - dma_addr_t *dma_handle) -{ - return dma_alloc_coherent(&sdev->ofdev.dev, size, - dma_handle, GFP_ATOMIC); -} - -static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle); -} - -#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL -#define SBUS_DMA_TODEVICE DMA_TO_DEVICE -#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE -#define SBUS_DMA_NONE DMA_NONE - -/* All the rest use streaming mode mappings. */ -static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, - size_t size, int direction) -{ - return dma_map_single(&sdev->ofdev.dev, ptr, size, - (enum dma_data_direction) direction); -} - -static inline void sbus_unmap_single(struct sbus_dev *sdev, - dma_addr_t dma_addr, size_t size, - int direction) -{ - dma_unmap_single(&sdev->ofdev.dev, dma_addr, size, - (enum dma_data_direction) direction); -} - -static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, - int nents, int direction) -{ - return dma_map_sg(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} - -static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, - int nents, int direction) -{ - dma_unmap_sg(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} - -/* Finally, allow explicit synchronization of streamable mappings. */ -static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, - dma_addr_t dma_handle, - size_t size, int direction) -{ - dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size, - (enum dma_data_direction) direction); -} -#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu - -static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, - dma_addr_t dma_handle, - size_t size, int direction) -{ - /* No flushing needed to sync cpu writes to the device. */ -} - -static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, - struct scatterlist *sg, - int nents, int direction) -{ - dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} -#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu - -static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, - struct scatterlist *sg, - int nents, int direction) -{ - /* No flushing needed to sync cpu writes to the device. */ -} - -extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); -extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); -extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); -extern int sbus_arch_preinit(void); -extern void sbus_arch_postinit(void); - -#endif /* !(_SPARC64_SBUS_H) */ diff --git a/arch/sparc/include/asm/serial.h b/arch/sparc/include/asm/serial.h new file mode 100644 index 00000000000..f90d61c2805 --- /dev/null +++ b/arch/sparc/include/asm/serial.h @@ -0,0 +1,6 @@ +#ifndef __SPARC_SERIAL_H +#define __SPARC_SERIAL_H + +#define BASE_BAUD ( 1843200 / 16 ) + +#endif /* __SPARC_SERIAL_H */ diff --git a/arch/sparc/include/asm/spinlock_32.h b/arch/sparc/include/asm/spinlock_32.h index de2249b267c..bf2d532593e 100644 --- a/arch/sparc/include/asm/spinlock_32.h +++ b/arch/sparc/include/asm/spinlock_32.h @@ -6,8 +6,6 @@ #ifndef __SPARC_SPINLOCK_H #define __SPARC_SPINLOCK_H -#include <linux/threads.h> /* For NR_CPUS */ - #ifndef __ASSEMBLY__ #include <asm/psr.h> diff --git a/arch/sparc/include/asm/spinlock_64.h b/arch/sparc/include/asm/spinlock_64.h index 0006fe9f8c7..120cfe4577c 100644 --- a/arch/sparc/include/asm/spinlock_64.h +++ b/arch/sparc/include/asm/spinlock_64.h @@ -6,8 +6,6 @@ #ifndef __SPARC64_SPINLOCK_H #define __SPARC64_SPINLOCK_H -#include <linux/threads.h> /* For NR_CPUS */ - #ifndef __ASSEMBLY__ /* To get debugging spinlocks which detect and catch diff --git a/arch/sparc/include/asm/sstate.h b/arch/sparc/include/asm/sstate.h deleted file mode 100644 index a7c35dbcb28..00000000000 --- a/arch/sparc/include/asm/sstate.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _SPARC64_SSTATE_H -#define _SPARC64_SSTATE_H - -extern void sstate_booting(void); -extern void sstate_running(void); -extern void sstate_halt(void); -extern void sstate_poweroff(void); -extern void sstate_panic(void); -extern void sstate_reboot(void); - -extern void sun4v_sstate_init(void); - -#endif /* _SPARC64_SSTATE_H */ diff --git a/arch/sparc/include/asm/starfire.h b/arch/sparc/include/asm/starfire.h index 07bafd31e33..d56ce60a599 100644 --- a/arch/sparc/include/asm/starfire.h +++ b/arch/sparc/include/asm/starfire.h @@ -12,7 +12,6 @@ extern int this_is_starfire; extern void check_if_starfire(void); -extern void starfire_cpu_setup(void); extern int starfire_hard_smp_processor_id(void); extern void starfire_hookup(int); extern unsigned int starfire_translate(unsigned long imap, unsigned int upaid); diff --git a/arch/sparc/include/asm/statfs.h b/arch/sparc/include/asm/statfs.h index 5e937a73743..55e607ad461 100644 --- a/arch/sparc/include/asm/statfs.h +++ b/arch/sparc/include/asm/statfs.h @@ -1,8 +1,6 @@ #ifndef ___ASM_SPARC_STATFS_H #define ___ASM_SPARC_STATFS_H -#if defined(__sparc__) && defined(__arch64__) -#include <asm/statfs_64.h> -#else -#include <asm/statfs_32.h> -#endif + +#include <asm-generic/statfs.h> + #endif diff --git a/arch/sparc/include/asm/statfs_32.h b/arch/sparc/include/asm/statfs_32.h deleted file mode 100644 index 304520fa886..00000000000 --- a/arch/sparc/include/asm/statfs_32.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _SPARC_STATFS_H -#define _SPARC_STATFS_H - -#include <asm-generic/statfs.h> - -#endif diff --git a/arch/sparc/include/asm/statfs_64.h b/arch/sparc/include/asm/statfs_64.h deleted file mode 100644 index 79b3c890a5f..00000000000 --- a/arch/sparc/include/asm/statfs_64.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _SPARC64_STATFS_H -#define _SPARC64_STATFS_H - -#ifndef __KERNEL_STRICT_NAMES - -#include <linux/types.h> - -typedef __kernel_fsid_t fsid_t; - -#endif - -struct statfs { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct statfs64 { - long f_type; - long f_bsize; - long f_blocks; - long f_bfree; - long f_bavail; - long f_files; - long f_ffree; - __kernel_fsid_t f_fsid; - long f_namelen; - long f_frsize; - long f_spare[5]; -}; - -struct compat_statfs64 { - __u32 f_type; - __u32 f_bsize; - __u64 f_blocks; - __u64 f_bfree; - __u64 f_bavail; - __u64 f_files; - __u64 f_ffree; - __kernel_fsid_t f_fsid; - __u32 f_namelen; - __u32 f_frsize; - __u32 f_spare[5]; -}; - -#endif diff --git a/arch/sparc/include/asm/sun4paddr.h b/arch/sparc/include/asm/sun4paddr.h deleted file mode 100644 index d52985f19f4..00000000000 --- a/arch/sparc/include/asm/sun4paddr.h +++ /dev/null @@ -1,56 +0,0 @@ -/* - * sun4paddr.h: Various physical addresses on sun4 machines - * - * Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au) - * Copyright (C) 1998 Chris Davis (cdavis@cois.on.ca) - * - * Now supports more sun4's - */ - -#ifndef _SPARC_SUN4PADDR_H -#define _SPARC_SUN4PADDR_H - -#define SUN4_IE_PHYSADDR 0xf5000000 -#define SUN4_UNUSED_PHYSADDR 0 - -/* these work for me */ -#define SUN4_200_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_200_CLOCK_PHYSADDR 0xf3000000 -#define SUN4_200_BWTWO_PHYSADDR 0xfd000000 -#define SUN4_200_ETH_PHYSADDR 0xf6000000 -#define SUN4_200_SI_PHYSADDR 0xff200000 - -/* these were here before */ -#define SUN4_300_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_300_CLOCK_PHYSADDR 0xf2000000 -#define SUN4_300_TIMER_PHYSADDR 0xef000000 -#define SUN4_300_ETH_PHYSADDR 0xf9000000 -#define SUN4_300_BWTWO_PHYSADDR 0xfb400000 -#define SUN4_300_DMA_PHYSADDR 0xfa001000 -#define SUN4_300_ESP_PHYSADDR 0xfa000000 - -/* Are these right? */ -#define SUN4_400_MEMREG_PHYSADDR 0xf4000000 -#define SUN4_400_CLOCK_PHYSADDR 0xf2000000 -#define SUN4_400_TIMER_PHYSADDR 0xef000000 -#define SUN4_400_ETH_PHYSADDR 0xf9000000 -#define SUN4_400_BWTWO_PHYSADDR 0xfb400000 -#define SUN4_400_DMA_PHYSADDR 0xfa001000 -#define SUN4_400_ESP_PHYSADDR 0xfa000000 - -/* - these are the actual values set and used in the code. Unused items set - to SUN_UNUSED_PHYSADDR - */ - -extern int sun4_memreg_physaddr; /* memory register (ecc?) */ -extern int sun4_clock_physaddr; /* system clock */ -extern int sun4_timer_physaddr; /* timer, where applicable */ -extern int sun4_eth_physaddr; /* onboard ethernet (ie/le) */ -extern int sun4_si_physaddr; /* sun3 scsi adapter */ -extern int sun4_bwtwo_physaddr; /* onboard bw2 */ -extern int sun4_dma_physaddr; /* scsi dma */ -extern int sun4_esp_physaddr; /* esp scsi */ -extern int sun4_ie_physaddr; /* interrupt enable */ - -#endif /* !(_SPARC_SUN4PADDR_H) */ diff --git a/arch/sparc/include/asm/sun4prom.h b/arch/sparc/include/asm/sun4prom.h deleted file mode 100644 index 9c8b4cbf629..00000000000 --- a/arch/sparc/include/asm/sun4prom.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * sun4prom.h -- interface to sun4 PROM monitor. We don't use most of this, - * so most of these are just placeholders. - */ - -#ifndef _SUN4PROM_H_ -#define _SUN4PROM_H_ - -/* - * Although this looks similar to an romvec for a OpenProm machine, it is - * actually closer to what was used in the Sun2 and Sun3. - * - * V2 entries exist only in version 2 PROMs and later, V3 in version 3 and later. - * - * Many of the function prototypes are guesses. Some are certainly wrong. - * Use with care. - */ - -typedef struct { - char *initSP; /* Initial system stack ptr */ - void (*startmon)(void); /* Initial PC for hardware */ - int *diagberr; /* Bus err handler for diags */ - struct linux_arguments_v0 **bootParam; /* Info for bootstrapped pgm */ - unsigned int *memorysize; /* Usable memory in bytes */ - unsigned char (*getchar)(void); /* Get char from input device */ - void (*putchar)(char); /* Put char to output device */ - int (*mayget)(void); /* Maybe get char, or -1 */ - int (*mayput)(int); /* Maybe put char, or -1 */ - unsigned char *echo; /* Should getchar echo? */ - unsigned char *insource; /* Input source selector */ - unsigned char *outsink; /* Output sink selector */ - int (*getkey)(void); /* Get next key if one exists */ - void (*initgetkey)(void); /* Initialize get key */ - unsigned int *translation; /* Kbd translation selector */ - unsigned char *keybid; /* Keyboard ID byte */ - int *screen_x; /* V2: Screen x pos (r/o) */ - int *screen_y; /* V2: Screen y pos (r/o) */ - struct keybuf *keybuf; /* Up/down keycode buffer */ - char *monid; /* Monitor version ID */ - void (*fbwritechar)(char); /* Write a character to FB */ - int *fbAddr; /* Address of frame buffer */ - char **font; /* Font table for FB */ - void (*fbwritestr)(char *); /* Write string to FB */ - void (*reboot)(char *); /* e.g. reboot("sd()vmlinux") */ - unsigned char *linebuf; /* The line input buffer */ - unsigned char **lineptr; /* Cur pointer into linebuf */ - int *linesize; /* length of line in linebuf */ - void (*getline)(char *); /* Get line from user */ - unsigned char (*getnextchar)(void); /* Get next char from linebuf */ - unsigned char (*peeknextchar)(void); /* Peek at next char */ - int *fbthere; /* =1 if frame buffer there */ - int (*getnum)(void); /* Grab hex num from line */ - int (*printf)(char *, ...); /* See prom_printf() instead */ - void (*printhex)(int); /* Format N digits in hex */ - unsigned char *leds; /* RAM copy of LED register */ - void (*setLEDs)(unsigned char *); /* Sets LED's and RAM copy */ - void (*NMIaddr)(void *); /* Addr for level 7 vector */ - void (*abortentry)(void); /* Entry for keyboard abort */ - int *nmiclock; /* Counts up in msec */ - int *FBtype; /* Frame buffer type */ - unsigned int romvecversion; /* Version number for this romvec */ - struct globram *globram; /* monitor global variables ??? */ - void * kbdaddr; /* Addr of keyboard in use */ - int *keyrinit; /* ms before kbd repeat */ - unsigned char *keyrtick; /* ms between repetitions */ - unsigned int *memoryavail; /* V1: Main mem usable size */ - long *resetaddr; /* where to jump on a reset */ - long *resetmap; /* pgmap entry for resetaddr */ - void (*exittomon)(void); /* Exit from user program */ - unsigned char **memorybitmap; /* V1: &{0 or &bits} */ - void (*setcxsegmap)(int ctxt, char *va, int pmeg); /* Set seg in any context */ - void (**vector_cmd)(void *); /* V2: Handler for 'v' cmd */ - unsigned long *expectedtrapsig; /* V3: Location of the expected trap signal */ - unsigned long *trapvectorbasetable; /* V3: Address of the trap vector table */ - int unused1; - int unused2; - int unused3; - int unused4; -} linux_sun4_romvec; - -extern linux_sun4_romvec *sun4_romvec; - -#endif /* _SUN4PROM_H_ */ diff --git a/arch/sparc/include/asm/system_32.h b/arch/sparc/include/asm/system_32.h index b4b024445fc..8623fc48fe2 100644 --- a/arch/sparc/include/asm/system_32.h +++ b/arch/sparc/include/asm/system_32.h @@ -34,13 +34,7 @@ enum sparc_cpu { extern enum sparc_cpu sparc_cpu_model; -#ifndef CONFIG_SUN4 -#define ARCH_SUN4C_SUN4 (sparc_cpu_model==sun4c) -#define ARCH_SUN4 0 -#else -#define ARCH_SUN4C_SUN4 1 -#define ARCH_SUN4 1 -#endif +#define ARCH_SUN4C (sparc_cpu_model==sun4c) #define SUN4M_NCPUS 4 /* Architectural limit of sun4m. */ @@ -55,6 +49,7 @@ extern unsigned long empty_zero_page; extern void sun_do_break(void); extern int serial_console; extern int stop_a_enabled; +extern int scons_pwroff; static inline int con_is_present(void) { diff --git a/arch/sparc/include/asm/system_64.h b/arch/sparc/include/asm/system_64.h index db9e742a406..8759f2a1b83 100644 --- a/arch/sparc/include/asm/system_64.h +++ b/arch/sparc/include/asm/system_64.h @@ -26,9 +26,8 @@ enum sparc_cpu { #define sparc_cpu_model sun4u -/* This cannot ever be a sun4c nor sun4 :) That's just history. */ -#define ARCH_SUN4C_SUN4 0 -#define ARCH_SUN4 0 +/* This cannot ever be a sun4c :) That's just history. */ +#define ARCH_SUN4C 0 extern char reboot_command[]; @@ -118,6 +117,7 @@ do { __asm__ __volatile__("ba,pt %%xcc, 1f\n\t" \ extern void sun_do_break(void); extern int stop_a_enabled; +extern int scons_pwroff; extern void fault_in_user_windows(void); extern void synchronize_user_stack(void); diff --git a/arch/sparc/include/asm/thread_info_32.h b/arch/sparc/include/asm/thread_info_32.h index cbb892d0dff..80fe547c3f4 100644 --- a/arch/sparc/include/asm/thread_info_32.h +++ b/arch/sparc/include/asm/thread_info_32.h @@ -80,11 +80,7 @@ register struct thread_info *current_thread_info_reg asm("g6"); /* * thread information allocation */ -#if PAGE_SHIFT == 13 -#define THREAD_INFO_ORDER 0 -#else /* PAGE_SHIFT */ #define THREAD_INFO_ORDER 1 -#endif #define __HAVE_ARCH_THREAD_INFO_ALLOCATOR @@ -139,6 +135,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) #define TIF_POLLING_NRFLAG 9 /* true if poll_idle() is polling * TIF_NEED_RESCHED */ #define TIF_MEMDIE 10 +#define TIF_FREEZE 11 /* is freezing for suspend */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -152,6 +149,7 @@ BTFIXUPDEF_CALL(void, free_thread_info, struct thread_info *) #define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | \ _TIF_SIGPENDING | \ _TIF_RESTORE_SIGMASK) +#define _TIF_FREEZE (1<<TIF_FREEZE) #endif /* __KERNEL__ */ diff --git a/arch/sparc/include/asm/thread_info_64.h b/arch/sparc/include/asm/thread_info_64.h index c0a737d7292..639ac805448 100644 --- a/arch/sparc/include/asm/thread_info_64.h +++ b/arch/sparc/include/asm/thread_info_64.h @@ -237,6 +237,7 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define TIF_ABI_PENDING 12 #define TIF_MEMDIE 13 #define TIF_POLLING_NRFLAG 14 +#define TIF_FREEZE 15 /* is freezing for suspend */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) @@ -249,6 +250,7 @@ register struct thread_info *current_thread_info_reg asm("g6"); #define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT) #define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING) #define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) +#define _TIF_FREEZE (1<<TIF_FREEZE) #define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \ _TIF_DO_NOTIFY_RESUME_MASK | \ diff --git a/arch/sparc/include/asm/timer_32.h b/arch/sparc/include/asm/timer_32.h index 361e53898dd..2ec030ef381 100644 --- a/arch/sparc/include/asm/timer_32.h +++ b/arch/sparc/include/asm/timer_32.h @@ -9,96 +9,9 @@ #define _SPARC_TIMER_H #include <asm/system.h> /* For SUN4M_NCPUS */ -#include <asm/sun4paddr.h> #include <asm/btfixup.h> -/* Timer structures. The interrupt timer has two properties which - * are the counter (which is handled in do_timer in sched.c) and the limit. - * This limit is where the timer's counter 'wraps' around. Oddly enough, - * the sun4c timer when it hits the limit wraps back to 1 and not zero - * thus when calculating the value at which it will fire a microsecond you - * must adjust by one. Thanks SUN for designing such great hardware ;( - */ - -/* Note that I am only going to use the timer that interrupts at - * Sparc IRQ 10. There is another one available that can fire at - * IRQ 14. Currently it is left untouched, we keep the PROM's limit - * register value and let the prom take these interrupts. This allows - * L1-A to work. - */ - -struct sun4c_timer_info { - __volatile__ unsigned int cur_count10; - __volatile__ unsigned int timer_limit10; - __volatile__ unsigned int cur_count14; - __volatile__ unsigned int timer_limit14; -}; - -#define SUN4C_TIMER_PHYSADDR 0xf3000000 -#ifdef CONFIG_SUN4 -#define SUN_TIMER_PHYSADDR SUN4_300_TIMER_PHYSADDR -#else -#define SUN_TIMER_PHYSADDR SUN4C_TIMER_PHYSADDR -#endif - -/* A sun4m has two blocks of registers which are probably of the same - * structure. LSI Logic's L64851 is told to _decrement_ from the limit - * value. Aurora behaves similarly but its limit value is compacted in - * other fashion (it's wider). Documented fields are defined here. - */ - -/* As with the interrupt register, we have two classes of timer registers - * which are per-cpu and master. Per-cpu timers only hit that cpu and are - * only level 14 ticks, master timer hits all cpus and is level 10. - */ - -#define SUN4M_PRM_CNT_L 0x80000000 -#define SUN4M_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4m_timer_percpu_info { - __volatile__ unsigned int l14_timer_limit; /* Initial value is 0x009c4000 */ - __volatile__ unsigned int l14_cur_count; - - /* This register appears to be write only and/or inaccessible - * on Uni-Processor sun4m machines. - */ - __volatile__ unsigned int l14_limit_noclear; /* Data access error is here */ - - __volatile__ unsigned int cntrl; /* =1 after POST on Aurora */ - __volatile__ unsigned char space[PAGE_SIZE - 16]; -}; - -struct sun4m_timer_regs { - struct sun4m_timer_percpu_info cpu_timers[SUN4M_NCPUS]; - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_count; - - /* Again, this appears to be write only and/or inaccessible - * on uni-processor sun4m machines. - */ - volatile unsigned int l10_limit_noclear; - - /* This register too, it must be magic. */ - volatile unsigned int foobar; - - volatile unsigned int cfg; /* equals zero at boot time... */ -}; - -#define SUN4D_PRM_CNT_L 0x80000000 -#define SUN4D_PRM_CNT_LVALUE 0x7FFFFC00 - -struct sun4d_timer_regs { - volatile unsigned int l10_timer_limit; - volatile unsigned int l10_cur_countx; - volatile unsigned int l10_limit_noclear; - volatile unsigned int ctrl; - volatile unsigned int l10_cur_count; -}; - -extern struct sun4d_timer_regs *sun4d_timers; - extern __volatile__ unsigned int *master_l10_counter; -extern __volatile__ unsigned int *master_l10_limit; /* FIXME: Make do_[gs]ettimeofday btfixup calls */ BTFIXUPDEF_CALL(int, bus_do_settimeofday, struct timespec *tv) diff --git a/arch/sparc/include/asm/vac-ops.h b/arch/sparc/include/asm/vac-ops.h index d10527611f1..a63e88ef042 100644 --- a/arch/sparc/include/asm/vac-ops.h +++ b/arch/sparc/include/asm/vac-ops.h @@ -76,11 +76,7 @@ * cacheable bit in the pte's of all such pages. */ -#ifdef CONFIG_SUN4 -#define S4CVAC_BADBITS 0x0001e000 -#else #define S4CVAC_BADBITS 0x0000f000 -#endif /* The following is true if vaddr1 and vaddr2 would cause * a 'bad alias'. @@ -94,10 +90,7 @@ */ struct sun4c_vac_props { unsigned int num_bytes; /* Size of the cache */ - unsigned int num_lines; /* Number of cache lines */ unsigned int do_hwflushes; /* Hardware flushing available? */ - enum { VAC_NONE, VAC_WRITE_THROUGH, - VAC_WRITE_BACK } type; /* What type of VAC? */ unsigned int linesize; /* Size of each line in bytes */ unsigned int log2lsize; /* log2(linesize) */ unsigned int on; /* VAC is enabled */ diff --git a/arch/sparc/include/asm/vfc_ioctls.h b/arch/sparc/include/asm/vfc_ioctls.h deleted file mode 100644 index af8b69007b2..00000000000 --- a/arch/sparc/include/asm/vfc_ioctls.h +++ /dev/null @@ -1,58 +0,0 @@ -/* Copyright (c) 1996 by Manish Vachharajani */ - -#ifndef _LINUX_VFC_IOCTLS_H_ -#define _LINUX_VFC_IOCTLS_H_ - - /* IOCTLs */ -#define VFC_IOCTL(a) (('j' << 8) | a) -#define VFCGCTRL (VFC_IOCTL (0)) /* get vfc attributes */ -#define VFCSCTRL (VFC_IOCTL (1)) /* set vfc attributes */ -#define VFCGVID (VFC_IOCTL (2)) /* get video decoder attributes */ -#define VFCSVID (VFC_IOCTL (3)) /* set video decoder attributes */ -#define VFCHUE (VFC_IOCTL (4)) /* set hue */ -#define VFCPORTCHG (VFC_IOCTL (5)) /* change port */ -#define VFCRDINFO (VFC_IOCTL (6)) /* read info */ - - /* Options for setting the vfc attributes and status */ -#define MEMPRST 0x1 /* reset FIFO ptr. */ -#define CAPTRCMD 0x2 /* start capture and wait */ -#define DIAGMODE 0x3 /* diag mode */ -#define NORMMODE 0x4 /* normal mode */ -#define CAPTRSTR 0x5 /* start capture */ -#define CAPTRWAIT 0x6 /* wait for capture to finish */ - - - /* Options for the decoder */ -#define STD_NTSC 0x1 /* NTSC mode */ -#define STD_PAL 0x2 /* PAL mode */ -#define COLOR_ON 0x3 /* force color ON */ -#define MONO 0x4 /* force color OFF */ - - /* Values returned by ioctl 2 */ - -#define NO_LOCK 1 -#define NTSC_COLOR 2 -#define NTSC_NOCOLOR 3 -#define PAL_COLOR 4 -#define PAL_NOCOLOR 5 - -/* Not too sure what this does yet */ - /* Options for setting Field number */ -#define ODD_FIELD 0x1 -#define EVEN_FIELD 0x0 -#define ACTIVE_ONLY 0x2 -#define NON_ACTIVE 0x0 - -/* Debug options */ -#define VFC_I2C_SEND 0 -#define VFC_I2C_RECV 1 - -struct vfc_debug_inout -{ - unsigned long addr; - unsigned long ret; - unsigned long len; - unsigned char __user *buffer; -}; - -#endif /* _LINUX_VFC_IOCTLS_H_ */ diff --git a/arch/sparc/include/asm/visasm.h b/arch/sparc/include/asm/visasm.h index de797b9bf55..39ca301920d 100644 --- a/arch/sparc/include/asm/visasm.h +++ b/arch/sparc/include/asm/visasm.h @@ -57,6 +57,7 @@ static inline void save_and_clear_fpu(void) { " " : : "i" (FPRS_FEF|FPRS_DU) : "o5", "g1", "g2", "g3", "g7", "cc"); } +extern int vis_emul(struct pt_regs *, unsigned int); #endif #endif /* _SPARC64_ASI_H */ diff --git a/arch/sparc/kernel/Makefile b/arch/sparc/kernel/Makefile index 6e03a2a7863..2d658209509 100644 --- a/arch/sparc/kernel/Makefile +++ b/arch/sparc/kernel/Makefile @@ -13,15 +13,13 @@ obj-y := entry.o wof.o wuf.o etrap.o rtrap.o traps.o $(IRQ_OBJS) \ time.o windows.o cpu.o devices.o \ tadpole.o tick14.o ptrace.o \ unaligned.o una_asm.o muldiv.o \ - prom.o of_device.o devres.o + prom.o of_device.o devres.o dma.o devres-y = ../../../kernel/irq/devres.o obj-$(CONFIG_PCI) += pcic.o -obj-$(CONFIG_SUN4) += sun4setup.o obj-$(CONFIG_SMP) += trampoline.o smp.o sun4m_smp.o sun4d_smp.o obj-$(CONFIG_SUN_AUXIO) += auxio.o -obj-$(CONFIG_PCI) += ebus.o obj-$(CONFIG_SUN_PM) += apc.o pmc.o obj-$(CONFIG_MODULES) += module.o sparc_ksyms.o obj-$(CONFIG_SPARC_LED) += led.o diff --git a/arch/sparc/kernel/apc.c b/arch/sparc/kernel/apc.c index 5267d48fb2c..9c115823c4b 100644 --- a/arch/sparc/kernel/apc.c +++ b/arch/sparc/kernel/apc.c @@ -12,9 +12,10 @@ #include <linux/miscdevice.h> #include <linux/smp_lock.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/oplib.h> #include <asm/uaccess.h> #include <asm/auxio.h> @@ -29,11 +30,10 @@ #define APC_OBPNAME "power-management" #define APC_DEVNAME "apc" -volatile static u8 __iomem *regs; -static int apc_regsize; -static int apc_no_idle __initdata = 0; +static u8 __iomem *regs; +static int apc_no_idle __devinitdata = 0; -#define apc_readb(offs) (sbus_readb(regs+offs)) +#define apc_readb(offs) (sbus_readb(regs+offs)) #define apc_writeb(val, offs) (sbus_writeb(val, regs+offs)) /* Specify "apc=noidle" on the kernel command line to @@ -69,9 +69,9 @@ static void apc_swift_idle(void) #endif } -static inline void apc_free(void) +static inline void apc_free(struct of_device *op) { - sbus_iounmap(regs, apc_regsize); + of_iounmap(&op->resource[0], regs, resource_size(&op->resource[0])); } static int apc_open(struct inode *inode, struct file *f) @@ -153,52 +153,56 @@ static const struct file_operations apc_fops = { static struct miscdevice apc_miscdev = { APC_MINOR, APC_DEVNAME, &apc_fops }; -static int __init apc_probe(void) +static int __devinit apc_probe(struct of_device *op, + const struct of_device_id *match) { - struct sbus_bus *sbus = NULL; - struct sbus_dev *sdev = NULL; - int iTmp = 0; - - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { - if (!strcmp(sdev->prom_name, APC_OBPNAME)) { - goto sbus_done; - } - } - } + int err; -sbus_done: - if (!sdev) { - return -ENODEV; - } - - apc_regsize = sdev->reg_addrs[0].reg_size; - regs = sbus_ioremap(&sdev->resource[0], 0, - apc_regsize, APC_OBPNAME); - if(!regs) { + regs = of_ioremap(&op->resource[0], 0, + resource_size(&op->resource[0]), APC_OBPNAME); + if (!regs) { printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME); return -ENODEV; } - iTmp = misc_register(&apc_miscdev); - if (iTmp != 0) { + err = misc_register(&apc_miscdev); + if (err) { printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME); - apc_free(); + apc_free(op); return -ENODEV; } /* Assign power management IDLE handler */ - if(!apc_no_idle) + if (!apc_no_idle) pm_idle = apc_swift_idle; printk(KERN_INFO "%s: power management initialized%s\n", - APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : ""); + APC_DEVNAME, apc_no_idle ? " (CPU idle disabled)" : ""); + return 0; } +static struct of_device_id __initdata apc_match[] = { + { + .name = APC_OBPNAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, apc_match); + +static struct of_platform_driver apc_driver = { + .name = "apc", + .match_table = apc_match, + .probe = apc_probe, +}; + +static int __init apc_init(void) +{ + return of_register_driver(&apc_driver, &of_bus_type); +} + /* This driver is not critical to the boot process * and is easiest to ioremap when SBus is already * initialized, so we install ourselves thusly: */ -__initcall(apc_probe); - +__initcall(apc_init); diff --git a/arch/sparc/kernel/auxio.c b/arch/sparc/kernel/auxio.c index baf4ed3fb0f..09c857215a5 100644 --- a/arch/sparc/kernel/auxio.c +++ b/arch/sparc/kernel/auxio.c @@ -6,6 +6,8 @@ #include <linux/stddef.h> #include <linux/init.h> #include <linux/spinlock.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/oplib.h> #include <asm/io.h> #include <asm/auxio.h> @@ -59,7 +61,7 @@ void __init auxio_probe(void) r.flags = auxregs[0].which_io & 0xF; r.start = auxregs[0].phys_addr; r.end = auxregs[0].phys_addr + auxregs[0].reg_size - 1; - auxio_register = sbus_ioremap(&r, 0, auxregs[0].reg_size, "auxio"); + auxio_register = of_ioremap(&r, 0, auxregs[0].reg_size, "auxio"); /* Fix the address on sun4m and sun4c. */ if((((unsigned long) auxregs[0].phys_addr) & 3) == 3 || sparc_cpu_model == sun4c) @@ -128,7 +130,7 @@ void __init auxio_power_probe(void) r.flags = regs.which_io & 0xF; r.start = regs.phys_addr; r.end = regs.phys_addr + regs.reg_size - 1; - auxio_power_register = (unsigned char *) sbus_ioremap(&r, 0, + auxio_power_register = (unsigned char *) of_ioremap(&r, 0, regs.reg_size, "auxpower"); /* Display a quick message on the console. */ diff --git a/arch/sparc/kernel/devices.c b/arch/sparc/kernel/devices.c index b240b8863fd..ad656b044b8 100644 --- a/arch/sparc/kernel/devices.c +++ b/arch/sparc/kernel/devices.c @@ -143,7 +143,7 @@ void __init device_scan(void) #endif clock_stop_probe(); - if (ARCH_SUN4C_SUN4) + if (ARCH_SUN4C) sun4c_probe_memerr_reg(); return; diff --git a/arch/sparc/kernel/dma.c b/arch/sparc/kernel/dma.c new file mode 100644 index 00000000000..ebc8403b035 --- /dev/null +++ b/arch/sparc/kernel/dma.c @@ -0,0 +1,227 @@ +/* dma.c: PCI and SBUS DMA accessors for 32-bit sparc. + * + * Copyright (C) 2008 David S. Miller <davem@davemloft.net> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> +#include <linux/scatterlist.h> +#include <linux/mm.h> + +#ifdef CONFIG_PCI +#include <linux/pci.h> +#endif + +#include "dma.h" + +int dma_supported(struct device *dev, u64 mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_dma_supported(to_pci_dev(dev), mask); +#endif + return 0; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_set_dma_mask(to_pci_dev(dev), dma_mask); +#endif + return -EOPNOTSUPP; +} +EXPORT_SYMBOL(dma_set_mask); + +void *dma_alloc_coherent(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t flag) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_alloc_consistent(to_pci_dev(dev), size, dma_handle); +#endif + return sbus_alloc_consistent(dev, size, dma_handle); +} +EXPORT_SYMBOL(dma_alloc_coherent); + +void dma_free_coherent(struct device *dev, size_t size, + void *cpu_addr, dma_addr_t dma_handle) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_free_consistent(to_pci_dev(dev), size, + cpu_addr, dma_handle); + return; + } +#endif + sbus_free_consistent(dev, size, cpu_addr, dma_handle); +} +EXPORT_SYMBOL(dma_free_coherent); + +dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_single(to_pci_dev(dev), cpu_addr, + size, (int)direction); +#endif + return sbus_map_single(dev, cpu_addr, size, (int)direction); +} +EXPORT_SYMBOL(dma_map_single); + +void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, + size_t size, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_single(to_pci_dev(dev), dma_addr, + size, (int)direction); + return; + } +#endif + sbus_unmap_single(dev, dma_addr, size, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_single); + +dma_addr_t dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_page(to_pci_dev(dev), page, offset, + size, (int)direction); +#endif + return sbus_map_single(dev, page_address(page) + offset, + size, (int)direction); +} +EXPORT_SYMBOL(dma_map_page); + +void dma_unmap_page(struct device *dev, dma_addr_t dma_address, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_page(to_pci_dev(dev), dma_address, + size, (int)direction); + return; + } +#endif + sbus_unmap_single(dev, dma_address, size, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_page); + +int dma_map_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) + return pci_map_sg(to_pci_dev(dev), sg, nents, (int)direction); +#endif + return sbus_map_sg(dev, sg, nents, direction); +} +EXPORT_SYMBOL(dma_map_sg); + +void dma_unmap_sg(struct device *dev, struct scatterlist *sg, + int nents, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_unmap_sg(to_pci_dev(dev), sg, nents, (int)direction); + return; + } +#endif + sbus_unmap_sg(dev, sg, nents, (int)direction); +} +EXPORT_SYMBOL(dma_unmap_sg); + +void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_single_for_cpu(to_pci_dev(dev), dma_handle, + size, (int)direction); + return; + } +#endif + sbus_dma_sync_single_for_cpu(dev, dma_handle, size, (int) direction); +} +EXPORT_SYMBOL(dma_sync_single_for_cpu); + +void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle, + size_t size, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_single_for_device(to_pci_dev(dev), dma_handle, + size, (int)direction); + return; + } +#endif + sbus_dma_sync_single_for_device(dev, dma_handle, size, (int) direction); +} +EXPORT_SYMBOL(dma_sync_single_for_device); + +void dma_sync_single_range_for_cpu(struct device *dev, + dma_addr_t dma_handle, + unsigned long offset, + size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_cpu(dev, dma_handle+offset, size, direction); +} +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); + +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle, + unsigned long offset, size_t size, + enum dma_data_direction direction) +{ + dma_sync_single_for_device(dev, dma_handle+offset, size, direction); +} +EXPORT_SYMBOL(dma_sync_single_range_for_device); + +void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, + int nelems, enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_sg_for_cpu(to_pci_dev(dev), sg, + nelems, (int)direction); + return; + } +#endif + BUG(); +} +EXPORT_SYMBOL(dma_sync_sg_for_cpu); + +void dma_sync_sg_for_device(struct device *dev, + struct scatterlist *sg, int nelems, + enum dma_data_direction direction) +{ +#ifdef CONFIG_PCI + if (dev->bus == &pci_bus_type) { + pci_dma_sync_sg_for_device(to_pci_dev(dev), sg, + nelems, (int)direction); + return; + } +#endif + BUG(); +} +EXPORT_SYMBOL(dma_sync_sg_for_device); + +int dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return (dma_addr == DMA_ERROR_CODE); +} +EXPORT_SYMBOL(dma_mapping_error); + +int dma_get_cache_alignment(void) +{ + return 32; +} +EXPORT_SYMBOL(dma_get_cache_alignment); diff --git a/arch/sparc/kernel/dma.h b/arch/sparc/kernel/dma.h new file mode 100644 index 00000000000..f8d8951adb5 --- /dev/null +++ b/arch/sparc/kernel/dma.h @@ -0,0 +1,14 @@ +void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp); +void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba); +dma_addr_t sbus_map_single(struct device *dev, void *va, + size_t len, int direction); +void sbus_unmap_single(struct device *dev, dma_addr_t ba, + size_t n, int direction); +int sbus_map_sg(struct device *dev, struct scatterlist *sg, + int n, int direction); +void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, + int n, int direction); +void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, + size_t size, int direction); +void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, + size_t size, int direction); diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c deleted file mode 100644 index 97294232259..00000000000 --- a/arch/sparc/kernel/ebus.c +++ /dev/null @@ -1,393 +0,0 @@ -/* - * ebus.c: PCI to EBus bridge device. - * - * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be) - * - * Adopted for sparc by V. Roganov and G. Raiko. - * Fixes for different platforms by Pete Zaitcev. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/string.h> - -#include <asm/system.h> -#include <asm/page.h> -#include <asm/pbm.h> -#include <asm/ebus.h> -#include <asm/io.h> -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/bpp.h> - -struct linux_ebus *ebus_chain = NULL; - -/* We are together with pcic.c under CONFIG_PCI. */ -extern unsigned int pcic_pin_to_irq(unsigned int, const char *name); - -/* - * IRQ Blacklist - * Here we list PROMs and systems that are known to supply crap as IRQ numbers. - */ -struct ebus_device_irq { - char *name; - unsigned int pin; -}; - -struct ebus_system_entry { - char *esname; - struct ebus_device_irq *ipt; -}; - -static struct ebus_device_irq je1_1[] = { - { "8042", 3 }, - { "SUNW,CS4231", 0 }, - { "parallel", 0 }, - { "se", 2 }, - { NULL, 0 } -}; - -/* - * Gleb's JE1 supplied reasonable pin numbers, but mine did not (OBP 2.32). - * Blacklist the sucker... Note that Gleb's system will work. - */ -static struct ebus_system_entry ebus_blacklist[] = { - { "SUNW,JavaEngine1", je1_1 }, - { NULL, NULL } -}; - -static struct ebus_device_irq *ebus_blackp = NULL; - -/* - */ -static inline unsigned long ebus_alloc(size_t size) -{ - return (unsigned long)kmalloc(size, GFP_ATOMIC); -} - -/* - */ -static int __init ebus_blacklist_irq(const char *name) -{ - struct ebus_device_irq *dp; - - if ((dp = ebus_blackp) != NULL) { - for (; dp->name != NULL; dp++) { - if (strcmp(name, dp->name) == 0) { - return pcic_pin_to_irq(dp->pin, name); - } - } - } - return 0; -} - -static void __init fill_ebus_child(struct device_node *dp, - struct linux_ebus_child *dev) -{ - const int *regs; - const int *irqs; - int i, len; - - dev->prom_node = dp; - regs = of_get_property(dp, "reg", &len); - if (!regs) - len = 0; - dev->num_addrs = len / sizeof(regs[0]); - - for (i = 0; i < dev->num_addrs; i++) { - if (regs[i] >= dev->parent->num_addrs) { - prom_printf("UGH: property for %s was %d, need < %d\n", - dev->prom_node->name, len, - dev->parent->num_addrs); - panic(__func__); - } - - /* XXX resource */ - dev->resource[i].start = - dev->parent->resource[regs[i]].start; - } - - for (i = 0; i < PROMINTR_MAX; i++) - dev->irqs[i] = PCI_IRQ_NONE; - - if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { - dev->num_irqs = 1; - } else { - irqs = of_get_property(dp, "interrupts", &len); - if (!irqs) { - dev->num_irqs = 0; - dev->irqs[0] = 0; - if (dev->parent->num_irqs != 0) { - dev->num_irqs = 1; - dev->irqs[0] = dev->parent->irqs[0]; - } - } else { - dev->num_irqs = len / sizeof(irqs[0]); - if (irqs[0] == 0 || irqs[0] >= 8) { - /* - * XXX Zero is a valid pin number... - * This works as long as Ebus is not wired - * to INTA#. - */ - printk("EBUS: %s got bad irq %d from PROM\n", - dev->prom_node->name, irqs[0]); - dev->num_irqs = 0; - dev->irqs[0] = 0; - } else { - dev->irqs[0] = - pcic_pin_to_irq(irqs[0], - dev->prom_node->name); - } - } - } -} - -static void __init fill_ebus_device(struct device_node *dp, - struct linux_ebus_device *dev) -{ - const struct linux_prom_registers *regs; - struct linux_ebus_child *child; - struct dev_archdata *sd; - const int *irqs; - int i, n, len; - unsigned long baseaddr; - - dev->prom_node = dp; - - regs = of_get_property(dp, "reg", &len); - if (!regs) - len = 0; - if (len % sizeof(struct linux_prom_registers)) { - prom_printf("UGH: proplen for %s was %d, need multiple of %d\n", - dev->prom_node->name, len, - (int)sizeof(struct linux_prom_registers)); - panic(__func__); - } - dev->num_addrs = len / sizeof(struct linux_prom_registers); - - for (i = 0; i < dev->num_addrs; i++) { - /* - * XXX Collect JE-1 PROM - * - * Example - JS-E with 3.11: - * /ebus - * regs - * 0x00000000, 0x0, 0x00000000, 0x0, 0x00000000, - * 0x82000010, 0x0, 0xf0000000, 0x0, 0x01000000, - * 0x82000014, 0x0, 0x38800000, 0x0, 0x00800000, - * ranges - * 0x00, 0x00000000, 0x02000010, 0x0, 0x0, 0x01000000, - * 0x01, 0x01000000, 0x02000014, 0x0, 0x0, 0x00800000, - * /ebus/8042 - * regs - * 0x00000001, 0x00300060, 0x00000008, - * 0x00000001, 0x00300060, 0x00000008, - */ - n = regs[i].which_io; - if (n >= 4) { - /* XXX This is copied from old JE-1 by Gleb. */ - n = (regs[i].which_io - 0x10) >> 2; - } else { - ; - } - -/* - * XXX Now as we have regions, why don't we make an on-demand allocation... - */ - dev->resource[i].start = 0; - if ((baseaddr = dev->bus->self->resource[n].start + - regs[i].phys_addr) != 0) { - /* dev->resource[i].name = dev->prom_name; */ - if ((baseaddr = (unsigned long) ioremap(baseaddr, - regs[i].reg_size)) == 0) { - panic("ebus: unable to remap dev %s", - dev->prom_node->name); - } - } - dev->resource[i].start = baseaddr; /* XXX Unaligned */ - } - - for (i = 0; i < PROMINTR_MAX; i++) - dev->irqs[i] = PCI_IRQ_NONE; - - if ((dev->irqs[0] = ebus_blacklist_irq(dev->prom_node->name)) != 0) { - dev->num_irqs = 1; - } else { - irqs = of_get_property(dp, "interrupts", &len); - if (!irqs) { - dev->num_irqs = 0; - if ((dev->irqs[0] = dev->bus->self->irq) != 0) { - dev->num_irqs = 1; -/* P3 */ /* printk("EBUS: child %s irq %d from parent\n", dev->prom_name, dev->irqs[0]); */ - } - } else { - dev->num_irqs = 1; /* dev->num_irqs = len / sizeof(irqs[0]); */ - if (irqs[0] == 0 || irqs[0] >= 8) { - /* See above for the parent. XXX */ - printk("EBUS: %s got bad irq %d from PROM\n", - dev->prom_node->name, irqs[0]); - dev->num_irqs = 0; - dev->irqs[0] = 0; - } else { - dev->irqs[0] = - pcic_pin_to_irq(irqs[0], - dev->prom_node->name); - } - } - } - - sd = &dev->ofdev.dev.archdata; - sd->prom_node = dp; - sd->op = &dev->ofdev; - sd->iommu = dev->bus->ofdev.dev.parent->archdata.iommu; - - dev->ofdev.node = dp; - dev->ofdev.dev.parent = &dev->bus->ofdev.dev; - dev->ofdev.dev.bus = &ebus_bus_type; - sprintf(dev->ofdev.dev.bus_id, "ebus[%08x]", dp->node); - - /* Register with core */ - if (of_device_register(&dev->ofdev) != 0) - printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dp->path_component_name); - - if ((dp = dp->child) != NULL) { - dev->children = (struct linux_ebus_child *) - ebus_alloc(sizeof(struct linux_ebus_child)); - - child = dev->children; - child->next = NULL; - child->parent = dev; - child->bus = dev->bus; - fill_ebus_child(dp, child); - - while ((dp = dp->sibling) != NULL) { - child->next = (struct linux_ebus_child *) - ebus_alloc(sizeof(struct linux_ebus_child)); - - child = child->next; - child->next = NULL; - child->parent = dev; - child->bus = dev->bus; - fill_ebus_child(dp, child); - } - } -} - -void __init ebus_init(void) -{ - const struct linux_prom_pci_registers *regs; - struct linux_pbm_info *pbm; - struct linux_ebus_device *dev; - struct linux_ebus *ebus; - struct ebus_system_entry *sp; - struct pci_dev *pdev; - struct pcidev_cookie *cookie; - struct device_node *dp; - struct resource *p; - unsigned short pci_command; - int len, reg, nreg; - int num_ebus = 0; - - dp = of_find_node_by_path("/"); - for (sp = ebus_blacklist; sp->esname != NULL; sp++) { - if (strcmp(dp->name, sp->esname) == 0) { - ebus_blackp = sp->ipt; - break; - } - } - - pdev = pci_get_device(PCI_VENDOR_ID_SUN, PCI_DEVICE_ID_SUN_EBUS, NULL); - if (!pdev) - return; - - cookie = pdev->sysdata; - dp = cookie->prom_node; - - ebus_chain = ebus = (struct linux_ebus *) - ebus_alloc(sizeof(struct linux_ebus)); - ebus->next = NULL; - - while (dp) { - struct device_node *nd; - - ebus->prom_node = dp; - ebus->self = pdev; - ebus->parent = pbm = cookie->pbm; - - /* Enable BUS Master. */ - pci_read_config_word(pdev, PCI_COMMAND, &pci_command); - pci_command |= PCI_COMMAND_MASTER; - pci_write_config_word(pdev, PCI_COMMAND, pci_command); - - regs = of_get_property(dp, "reg", &len); - if (!regs) { - prom_printf("%s: can't find reg property\n", - __func__); - prom_halt(); - } - nreg = len / sizeof(struct linux_prom_pci_registers); - - p = &ebus->self->resource[0]; - for (reg = 0; reg < nreg; reg++) { - if (!(regs[reg].which_io & 0x03000000)) - continue; - - (p++)->start = regs[reg].phys_lo; - } - - ebus->ofdev.node = dp; - ebus->ofdev.dev.parent = &pdev->dev; - ebus->ofdev.dev.bus = &ebus_bus_type; - sprintf(ebus->ofdev.dev.bus_id, "ebus%d", num_ebus); - - /* Register with core */ - if (of_device_register(&ebus->ofdev) != 0) - printk(KERN_DEBUG "ebus: device registration error for %s!\n", - dp->path_component_name); - - - nd = dp->child; - if (!nd) - goto next_ebus; - - ebus->devices = (struct linux_ebus_device *) - ebus_alloc(sizeof(struct linux_ebus_device)); - - dev = ebus->devices; - dev->next = NULL; - dev->children = NULL; - dev->bus = ebus; - fill_ebus_device(nd, dev); - - while ((nd = nd->sibling) != NULL) { - dev->next = (struct linux_ebus_device *) - ebus_alloc(sizeof(struct linux_ebus_device)); - - dev = dev->next; - dev->next = NULL; - dev->children = NULL; - dev->bus = ebus; - fill_ebus_device(nd, dev); - } - - next_ebus: - pdev = pci_get_device(PCI_VENDOR_ID_SUN, - PCI_DEVICE_ID_SUN_EBUS, pdev); - if (!pdev) - break; - - cookie = pdev->sysdata; - dp = cookie->prom_node; - - ebus->next = (struct linux_ebus *) - ebus_alloc(sizeof(struct linux_ebus)); - ebus = ebus->next; - ebus->next = NULL; - ++num_ebus; - } - if (pdev) - pci_dev_put(pdev); -} diff --git a/arch/sparc/kernel/entry.S b/arch/sparc/kernel/entry.S index e8cdf715a54..faf9ccd9ef5 100644 --- a/arch/sparc/kernel/entry.S +++ b/arch/sparc/kernel/entry.S @@ -20,11 +20,7 @@ #include <asm/memreg.h> #include <asm/page.h> #include <asm/pgtable.h> -#ifdef CONFIG_SUN4 -#include <asm/pgtsun4.h> -#else #include <asm/pgtsun4c.h> -#endif #include <asm/winmacro.h> #include <asm/signal.h> #include <asm/obio.h> @@ -276,17 +272,18 @@ smp4m_ticker: */ maybe_smp4m_msg: GET_PROCESSOR4M_ID(o3) - set sun4m_interrupts, %l5 - ld [%l5], %o5 + sethi %hi(sun4m_irq_percpu), %l5 + sll %o3, 2, %o3 + or %l5, %lo(sun4m_irq_percpu), %o5 sethi %hi(0x40000000), %o2 - sll %o3, 12, %o3 ld [%o5 + %o3], %o1 - andcc %o1, %o2, %g0 + ld [%o1 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending + andcc %o3, %o2, %g0 be,a smp4m_ticker cmp %l7, 14 - st %o2, [%o5 + 0x4] + st %o2, [%o1 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x40000000 WRITE_PAUSE - ld [%o5], %g0 + ld [%o1 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -304,16 +301,16 @@ linux_trap_ipi15_sun4m: SAVE_ALL sethi %hi(0x80000000), %o2 GET_PROCESSOR4M_ID(o0) - set sun4m_interrupts, %l5 - ld [%l5], %o5 - sll %o0, 12, %o0 - add %o5, %o0, %o5 - ld [%o5], %o3 + sethi %hi(sun4m_irq_percpu), %l5 + or %l5, %lo(sun4m_irq_percpu), %o5 + sll %o0, 2, %o0 + ld [%o5 + %o0], %o5 + ld [%o5 + 0x00], %o3 ! sun4m_irq_percpu[cpu]->pending andcc %o3, %o2, %g0 be 1f ! Must be an NMI async memory error - st %o2, [%o5 + 4] + st %o2, [%o5 + 0x04] ! sun4m_irq_percpu[cpu]->clear=0x80000000 WRITE_PAUSE - ld [%o5], %g0 + ld [%o5 + 0x00], %g0 ! sun4m_irq_percpu[cpu]->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -327,12 +324,11 @@ linux_trap_ipi15_sun4m: 1: /* NMI async memory error handling. */ sethi %hi(0x80000000), %l4 - sethi %hi(0x4000), %o3 - sub %o5, %o0, %o5 - add %o5, %o3, %l5 - st %l4, [%l5 + 0xc] + sethi %hi(sun4m_irq_global), %o5 + ld [%o5 + %lo(sun4m_irq_global)], %l5 + st %l4, [%l5 + 0x0c] ! sun4m_irq_global->mask_set=0x80000000 WRITE_PAUSE - ld [%l5], %g0 + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending WRITE_PAUSE or %l0, PSR_PIL, %l4 wr %l4, 0x0, %psr @@ -341,9 +337,9 @@ linux_trap_ipi15_sun4m: WRITE_PAUSE call sun4m_nmi nop - st %l4, [%l5 + 0x8] + st %l4, [%l5 + 0x08] ! sun4m_irq_global->mask_clear=0x80000000 WRITE_PAUSE - ld [%l5], %g0 + ld [%l5 + 0x00], %g0 ! sun4m_irq_global->pending WRITE_PAUSE RESTORE_ALL @@ -775,11 +771,7 @@ vac_linesize_patch_32: subcc %l7, 32, %l7 * Ugly, but we cant use hardware flushing on the sun4 and we'd require * two instructions (Anton) */ -#ifdef CONFIG_SUN4 -vac_hwflush_patch1_on: nop -#else vac_hwflush_patch1_on: addcc %l7, -PAGE_SIZE, %l7 -#endif vac_hwflush_patch2_on: sta %g0, [%l3 + %l7] ASI_HWFLUSHSEG @@ -798,42 +790,10 @@ vac_hwflush_patch2_on: sta %g0, [%l3 + %l7] ASI_HWFLUSHSEG ! %l7 = 1 for textfault ! We want error in %l5, vaddr in %l6 sun4c_fault: -#ifdef CONFIG_SUN4 - sethi %hi(sun4c_memerr_reg), %l4 - ld [%l4+%lo(sun4c_memerr_reg)], %l4 ! memerr ctrl reg addr - ld [%l4], %l6 ! memerr ctrl reg - ld [%l4 + 4], %l5 ! memerr vaddr reg - andcc %l6, 0x80, %g0 ! check for error type - st %g0, [%l4 + 4] ! clear the error - be 0f ! normal error - sethi %hi(AC_BUS_ERROR), %l4 ! bus err reg addr - - call prom_halt ! something weird happened - ! what exactly did happen? - ! what should we do here? - -0: or %l4, %lo(AC_BUS_ERROR), %l4 ! bus err reg addr - lduba [%l4] ASI_CONTROL, %l6 ! bus err reg - - cmp %l7, 1 ! text fault? - be 1f ! yes - nop - - ld [%l1], %l4 ! load instruction that caused fault - srl %l4, 21, %l4 - andcc %l4, 1, %g0 ! store instruction? - - be 1f ! no - sethi %hi(SUN4C_SYNC_BADWRITE), %l4 ! yep - ! %lo(SUN4C_SYNC_BADWRITE) = 0 - or %l4, %l6, %l6 ! set write bit to emulate sun4c -1: -#else sethi %hi(AC_SYNC_ERR), %l4 add %l4, 0x4, %l6 ! AC_SYNC_VA in %l6 lda [%l6] ASI_CONTROL, %l5 ! Address lda [%l4] ASI_CONTROL, %l6 ! Error, retained for a bit -#endif andn %l5, 0xfff, %l5 ! Encode all info into l7 srl %l6, 14, %l4 @@ -880,12 +840,7 @@ sun4c_fault: or %l4, %lo(swapper_pg_dir), %l4 sll %l6, 2, %l6 ld [%l4 + %l6], %l4 -#ifdef CONFIG_SUN4 - sethi %hi(PAGE_MASK), %l6 - andcc %l4, %l6, %g0 -#else andcc %l4, PAGE_MASK, %g0 -#endif be sun4c_fault_fromuser lduXa [%l5] ASI_SEGMAP, %l4 @@ -937,11 +892,7 @@ invalid_segment_patch1: ld [%l6 + 0x08], %l3 ! tmp = entry->vaddr ! Flush segment from the cache. -#ifdef CONFIG_SUN4 - sethi %hi((128 * 1024)), %l7 -#else sethi %hi((64 * 1024)), %l7 -#endif 9: vac_hwflush_patch1: vac_linesize_patch: @@ -1029,12 +980,7 @@ invalid_segment_patch2: or %l4, %lo(swapper_pg_dir), %l4 sll %l3, 2, %l3 ld [%l4 + %l3], %l4 -#ifndef CONFIG_SUN4 and %l4, PAGE_MASK, %l4 -#else - sethi %hi(PAGE_MASK), %l6 - and %l4, %l6, %l4 -#endif srl %l5, (PAGE_SHIFT - 2), %l6 and %l6, ((SUN4C_PTRS_PER_PTE - 1) << 2), %l6 diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S index 50d9a16af79..2fe2c117e77 100644 --- a/arch/sparc/kernel/head.S +++ b/arch/sparc/kernel/head.S @@ -63,15 +63,9 @@ cputypvar_sun4m: .align 4 -#ifndef CONFIG_SUN4 sun4_notsup: - .asciz "Sparc-Linux sun4 needs a specially compiled kernel, turn CONFIG_SUN4 on.\n\n" + .asciz "Sparc-Linux sun4 support does no longer exist.\n\n" .align 4 -#else -sun4cdm_notsup: - .asciz "Kernel compiled with CONFIG_SUN4 cannot run on SUN4C/SUN4M/SUN4D\nTurn CONFIG_SUN4 off.\n\n" - .align 4 -#endif sun4e_notsup: .asciz "Sparc-Linux sun4e support does not exist\n\n" @@ -471,6 +465,7 @@ gokernel: mov %o7, %g4 ! Save %o7 /* Jump to it, and pray... */ + __INIT current_pc: call 1f nop @@ -780,15 +775,6 @@ execute_in_high_mem: nop found_version: -#ifdef CONFIG_SUN4 -/* For people who try sun4 kernels, even if Configure.help advises them. */ - ld [%g7 + 0x68], %o1 - set sun4cdm_notsup, %o0 - call %o1 - nop - b halt_me - nop -#endif /* Get the machine type via the mysterious romvec node operations. */ add %g7, 0x1c, %l1 @@ -1150,15 +1136,6 @@ sun4c_continue_boot: nop sun4_init: -#ifdef CONFIG_SUN4 -/* There, happy now Adrian? */ - set cputypval, %o2 ! Let everyone know we - set ' ', %o0 ! are a "sun4 " architecture - stb %o0, [%o2 + 0x4] - - b got_prop - nop -#else sethi %hi(SUN4_PROM_VECTOR+0x84), %o1 ld [%o1 + %lo(SUN4_PROM_VECTOR+0x84)], %o1 set sun4_notsup, %o0 @@ -1170,7 +1147,7 @@ sun4_init: nop 1: ba 1b ! Cannot exit into KMON nop -#endif + no_sun4e_here: ld [%g7 + 0x68], %o1 set sun4e_notsup, %o0 diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c index fc511f3c4c1..223a6582e1e 100644 --- a/arch/sparc/kernel/idprom.c +++ b/arch/sparc/kernel/idprom.c @@ -12,10 +12,6 @@ #include <asm/oplib.h> #include <asm/idprom.h> #include <asm/machines.h> /* Fun with Sun released architectures. */ -#ifdef CONFIG_SUN4 -#include <asm/sun4paddr.h> -extern void sun4setup(void); -#endif struct idprom *idprom; static struct idprom idprom_buffer; @@ -101,7 +97,4 @@ void __init idprom_init(void) idprom->id_ethaddr[0], idprom->id_ethaddr[1], idprom->id_ethaddr[2], idprom->id_ethaddr[3], idprom->id_ethaddr[4], idprom->id_ethaddr[5]); -#ifdef CONFIG_SUN4 - sun4setup(); -#endif } diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c index 2a8a847764d..4f025b36934 100644 --- a/arch/sparc/kernel/ioport.c +++ b/arch/sparc/kernel/ioport.c @@ -42,10 +42,13 @@ #include <asm/vaddrs.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/sbus.h> #include <asm/page.h> #include <asm/pgalloc.h> #include <asm/dma.h> +#include <asm/iommu.h> +#include <asm/io-unit.h> + +#include "dma.h" #define mmu_inval_dma_area(p, l) /* Anton pulled it out for 2.4.0-xx */ @@ -139,15 +142,6 @@ void iounmap(volatile void __iomem *virtual) } } -/* - */ -void __iomem *sbus_ioremap(struct resource *phyres, unsigned long offset, - unsigned long size, char *name) -{ - return _sparc_alloc_io(phyres->flags & 0xF, - phyres->start + offset, size, name); -} - void __iomem *of_ioremap(struct resource *res, unsigned long offset, unsigned long size, char *name) { @@ -164,13 +158,6 @@ void of_iounmap(struct resource *res, void __iomem *base, unsigned long size) EXPORT_SYMBOL(of_iounmap); /* - */ -void sbus_iounmap(volatile void __iomem *addr, unsigned long size) -{ - iounmap(addr); -} - -/* * Meat of mapping */ static void __iomem *_sparc_alloc_io(unsigned int busno, unsigned long phys, @@ -246,63 +233,19 @@ static void _sparc_free_io(struct resource *res) #ifdef CONFIG_SBUS -void sbus_set_sbus64(struct sbus_dev *sdev, int x) +void sbus_set_sbus64(struct device *dev, int x) { printk("sbus_set_sbus64: unsupported\n"); } -extern unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq); -void __init sbus_fill_device_irq(struct sbus_dev *sdev) -{ - struct linux_prom_irqs irqs[PROMINTR_MAX]; - int len; - - len = prom_getproperty(sdev->prom_node, "intr", - (char *)irqs, sizeof(irqs)); - if (len != -1) { - sdev->num_irqs = len / 8; - if (sdev->num_irqs == 0) { - sdev->irqs[0] = 0; - } else if (sparc_cpu_model == sun4d) { - for (len = 0; len < sdev->num_irqs; len++) - sdev->irqs[len] = - sun4d_build_irq(sdev, irqs[len].pri); - } else { - for (len = 0; len < sdev->num_irqs; len++) - sdev->irqs[len] = irqs[len].pri; - } - } else { - int interrupts[PROMINTR_MAX]; - - /* No "intr" node found-- check for "interrupts" node. - * This node contains SBus interrupt levels, not IPLs - * as in "intr", and no vector values. We convert - * SBus interrupt levels to PILs (platform specific). - */ - len = prom_getproperty(sdev->prom_node, "interrupts", - (char *)interrupts, sizeof(interrupts)); - if (len == -1) { - sdev->irqs[0] = 0; - sdev->num_irqs = 0; - } else { - sdev->num_irqs = len / sizeof(int); - for (len = 0; len < sdev->num_irqs; len++) { - sdev->irqs[len] = - sbint_to_irq(sdev, interrupts[len]); - } - } - } -} - /* * Allocate a chunk of memory suitable for DMA. * Typically devices use them for control blocks. * CPU may access them without any explicit flushing. - * - * XXX Some clever people know that sdev is not used and supply NULL. Watch. */ -void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) +void *sbus_alloc_consistent(struct device *dev, long len, u32 *dma_addrp) { + struct of_device *op = to_of_device(dev); unsigned long len_total = (len + PAGE_SIZE-1) & PAGE_MASK; unsigned long va; struct resource *res; @@ -336,13 +279,10 @@ void *sbus_alloc_consistent(struct sbus_dev *sdev, long len, u32 *dma_addrp) * XXX That's where sdev would be used. Currently we load * all iommu tables with the same translations. */ - if (mmu_map_dma_area(dma_addrp, va, res->start, len_total) != 0) + if (mmu_map_dma_area(dev, dma_addrp, va, res->start, len_total) != 0) goto err_noiommu; - /* Set the resource name, if known. */ - if (sdev) { - res->name = sdev->prom_name; - } + res->name = op->node->name; return (void *)(unsigned long)res->start; @@ -356,7 +296,7 @@ err_nopages: return NULL; } -void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) +void sbus_free_consistent(struct device *dev, long n, void *p, u32 ba) { struct resource *res; struct page *pgv; @@ -383,8 +323,8 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) kfree(res); /* mmu_inval_dma_area(va, n); */ /* it's consistent, isn't it */ - pgv = mmu_translate_dvma(ba); - mmu_unmap_dma_area(ba, n); + pgv = virt_to_page(p); + mmu_unmap_dma_area(dev, ba, n); __free_pages(pgv, get_order(n)); } @@ -394,7 +334,7 @@ void sbus_free_consistent(struct sbus_dev *sdev, long n, void *p, u32 ba) * CPU view of this memory may be inconsistent with * a device view and explicit flushing is necessary. */ -dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int direction) +dma_addr_t sbus_map_single(struct device *dev, void *va, size_t len, int direction) { /* XXX why are some lengths signed, others unsigned? */ if (len <= 0) { @@ -404,17 +344,17 @@ dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *va, size_t len, int dire if (len > 256*1024) { /* __get_free_pages() limit */ return 0; } - return mmu_get_scsi_one(va, len, sdev->bus); + return mmu_get_scsi_one(dev, va, len); } -void sbus_unmap_single(struct sbus_dev *sdev, dma_addr_t ba, size_t n, int direction) +void sbus_unmap_single(struct device *dev, dma_addr_t ba, size_t n, int direction) { - mmu_release_scsi_one(ba, n, sdev->bus); + mmu_release_scsi_one(dev, ba, n); } -int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +int sbus_map_sg(struct device *dev, struct scatterlist *sg, int n, int direction) { - mmu_get_scsi_sgl(sg, n, sdev->bus); + mmu_get_scsi_sgl(dev, sg, n); /* * XXX sparc64 can return a partial length here. sun4c should do this @@ -423,145 +363,28 @@ int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direct return n; } -void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) -{ - mmu_release_scsi_sgl(sg, n, sdev->bus); -} - -/* - */ -void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) -{ -#if 0 - unsigned long va; - struct resource *res; - - /* We do not need the resource, just print a message if invalid. */ - res = _sparc_find_resource(&_sparc_dvma, ba); - if (res == NULL) - panic("sbus_dma_sync_single: 0x%x\n", ba); - - va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ - /* - * XXX This bogosity will be fixed with the iommu rewrite coming soon - * to a kernel near you. - Anton - */ - /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ -#endif -} - -void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, dma_addr_t ba, size_t size, int direction) +void sbus_unmap_sg(struct device *dev, struct scatterlist *sg, int n, int direction) { -#if 0 - unsigned long va; - struct resource *res; - - /* We do not need the resource, just print a message if invalid. */ - res = _sparc_find_resource(&_sparc_dvma, ba); - if (res == NULL) - panic("sbus_dma_sync_single: 0x%x\n", ba); - - va = page_address(mmu_translate_dvma(ba)); /* XXX higmem */ - /* - * XXX This bogosity will be fixed with the iommu rewrite coming soon - * to a kernel near you. - Anton - */ - /* mmu_inval_dma_area(va, (size + PAGE_SIZE-1) & PAGE_MASK); */ -#endif + mmu_release_scsi_sgl(dev, sg, n); } -void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +void sbus_dma_sync_single_for_cpu(struct device *dev, dma_addr_t ba, size_t size, int direction) { - printk("sbus_dma_sync_sg_for_cpu: not implemented yet\n"); } -void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, struct scatterlist *sg, int n, int direction) +void sbus_dma_sync_single_for_device(struct device *dev, dma_addr_t ba, size_t size, int direction) { - printk("sbus_dma_sync_sg_for_device: not implemented yet\n"); -} - -/* Support code for sbus_init(). */ -/* - * XXX This functions appears to be a distorted version of - * prom_sbus_ranges_init(), with all sun4d stuff cut away. - * Ask DaveM what is going on here, how is sun4d supposed to work... XXX - */ -/* added back sun4d patch from Thomas Bogendoerfer - should be OK (crn) */ -void __init sbus_arch_bus_ranges_init(struct device_node *pn, struct sbus_bus *sbus) -{ - int parent_node = pn->node; - - if (sparc_cpu_model == sun4d) { - struct linux_prom_ranges iounit_ranges[PROMREG_MAX]; - int num_iounit_ranges, len; - - len = prom_getproperty(parent_node, "ranges", - (char *) iounit_ranges, - sizeof (iounit_ranges)); - if (len != -1) { - num_iounit_ranges = - (len / sizeof(struct linux_prom_ranges)); - prom_adjust_ranges(sbus->sbus_ranges, - sbus->num_sbus_ranges, - iounit_ranges, num_iounit_ranges); - } - } } -void __init sbus_setup_iommu(struct sbus_bus *sbus, struct device_node *dp) -{ -#ifndef CONFIG_SUN4 - struct device_node *parent = dp->parent; - - if (sparc_cpu_model != sun4d && - parent != NULL && - !strcmp(parent->name, "iommu")) { - extern void iommu_init(int iommu_node, struct sbus_bus *sbus); - - iommu_init(parent->node, sbus); - } - - if (sparc_cpu_model == sun4d) { - extern void iounit_init(int sbi_node, int iounit_node, - struct sbus_bus *sbus); - - iounit_init(dp->node, parent->node, sbus); - } -#endif -} - -void __init sbus_setup_arch_props(struct sbus_bus *sbus, struct device_node *dp) -{ - if (sparc_cpu_model == sun4d) { - struct device_node *parent = dp->parent; - - sbus->devid = of_getintprop_default(parent, "device-id", 0); - sbus->board = of_getintprop_default(parent, "board#", 0); - } -} - -int __init sbus_arch_preinit(void) +static int __init sparc_register_ioport(void) { register_proc_sparc_ioport(); -#ifdef CONFIG_SUN4 - { - extern void sun4_dvma_init(void); - sun4_dvma_init(); - } - return 1; -#else return 0; -#endif } -void __init sbus_arch_postinit(void) -{ - if (sparc_cpu_model == sun4d) { - extern void sun4d_init_sbi_irq(void); - sun4d_init_sbi_irq(); - } -} +arch_initcall(sparc_register_ioport); + #endif /* CONFIG_SBUS */ #ifdef CONFIG_PCI diff --git a/arch/sparc/kernel/irq.h b/arch/sparc/kernel/irq.h index 32ef3ebd0a8..db751388153 100644 --- a/arch/sparc/kernel/irq.h +++ b/arch/sparc/kernel/irq.h @@ -13,7 +13,6 @@ BTFIXUPDEF_CALL(void, enable_irq, unsigned int) BTFIXUPDEF_CALL(void, disable_pil_irq, unsigned int) BTFIXUPDEF_CALL(void, enable_pil_irq, unsigned int) BTFIXUPDEF_CALL(void, clear_clock_irq, void) -BTFIXUPDEF_CALL(void, clear_profile_irq, int) BTFIXUPDEF_CALL(void, load_profile_irq, int, unsigned int) static inline void __disable_irq(unsigned int irq) @@ -41,11 +40,6 @@ static inline void clear_clock_irq(void) BTFIXUP_CALL(clear_clock_irq)(); } -static inline void clear_profile_irq(int irq) -{ - BTFIXUP_CALL(clear_profile_irq)(irq); -} - static inline void load_profile_irq(int cpu, int limit) { BTFIXUP_CALL(load_profile_irq)(cpu, limit); diff --git a/arch/sparc/kernel/of_device.c b/arch/sparc/kernel/of_device.c index f58c537446a..0837bd52e28 100644 --- a/arch/sparc/kernel/of_device.c +++ b/arch/sparc/kernel/of_device.c @@ -29,15 +29,38 @@ struct of_device *of_find_device_by_node(struct device_node *dp) } EXPORT_SYMBOL(of_find_device_by_node); -#ifdef CONFIG_PCI -struct bus_type ebus_bus_type; -EXPORT_SYMBOL(ebus_bus_type); -#endif +unsigned int irq_of_parse_and_map(struct device_node *node, int index) +{ + struct of_device *op = of_find_device_by_node(node); + + if (!op || index >= op->num_irqs) + return 0; + + return op->irqs[index]; +} +EXPORT_SYMBOL(irq_of_parse_and_map); + +/* Take the archdata values for IOMMU, STC, and HOSTDATA found in + * BUS and propagate to all child of_device objects. + */ +void of_propagate_archdata(struct of_device *bus) +{ + struct dev_archdata *bus_sd = &bus->dev.archdata; + struct device_node *bus_dp = bus->node; + struct device_node *dp; + + for (dp = bus_dp->child; dp; dp = dp->sibling) { + struct of_device *op = of_find_device_by_node(dp); -#ifdef CONFIG_SBUS -struct bus_type sbus_bus_type; -EXPORT_SYMBOL(sbus_bus_type); -#endif + op->dev.archdata.iommu = bus_sd->iommu; + op->dev.archdata.stc = bus_sd->stc; + op->dev.archdata.host_controller = bus_sd->host_controller; + op->dev.archdata.numa_node = bus_sd->numa_node; + + if (dp->child) + of_propagate_archdata(op); + } +} struct bus_type of_platform_bus_type; EXPORT_SYMBOL(of_platform_bus_type); @@ -327,6 +350,27 @@ static int __init build_one_resource(struct device_node *parent, return 1; } +static int __init use_1to1_mapping(struct device_node *pp) +{ + /* If we have a ranges property in the parent, use it. */ + if (of_find_property(pp, "ranges", NULL) != NULL) + return 0; + + /* Some SBUS devices use intermediate nodes to express + * hierarchy within the device itself. These aren't + * real bus nodes, and don't have a 'ranges' property. + * But, we should still pass the translation work up + * to the SBUS itself. + */ + if (!strcmp(pp->name, "dma") || + !strcmp(pp->name, "espdma") || + !strcmp(pp->name, "ledma") || + !strcmp(pp->name, "lebuffer")) + return 0; + + return 1; +} + static int of_resource_verbose; static void __init build_device_resources(struct of_device *op, @@ -373,10 +417,7 @@ static void __init build_device_resources(struct of_device *op, flags = bus->get_flags(reg, 0); - /* If the immediate parent has no ranges property to apply, - * just use a 1<->1 mapping. - */ - if (of_find_property(pp, "ranges", NULL) == NULL) { + if (use_1to1_mapping(pp)) { result = of_read_addr(addr, na); goto build_res; } @@ -565,15 +606,6 @@ static int __init of_bus_driver_init(void) int err; err = of_bus_type_init(&of_platform_bus_type, "of"); -#ifdef CONFIG_PCI - if (!err) - err = of_bus_type_init(&ebus_bus_type, "ebus"); -#endif -#ifdef CONFIG_SBUS - if (!err) - err = of_bus_type_init(&sbus_bus_type, "sbus"); -#endif - if (!err) scan_of_devices(); diff --git a/arch/sparc/kernel/pcic.c b/arch/sparc/kernel/pcic.c index a6a6f982337..462584e55fb 100644 --- a/arch/sparc/kernel/pcic.c +++ b/arch/sparc/kernel/pcic.c @@ -17,8 +17,6 @@ #include <linux/slab.h> #include <linux/jiffies.h> -#include <asm/ebus.h> -#include <asm/sbus.h> /* for sanity check... */ #include <asm/swift.h> /* for cache flushing. */ #include <asm/io.h> @@ -430,7 +428,6 @@ static int __init pcic_init(void) pcic_pbm_scan_bus(pcic); - ebus_init(); return 0; } @@ -493,10 +490,6 @@ static void pcic_map_pci_device(struct linux_pcic *pcic, * do ioremap() before accessing PC-style I/O, * we supply virtual, ready to access address. * - * Ebus devices do not come here even if - * CheerIO makes a similar conversion. - * See ebus.c for details. - * * Note that request_region() * works for these devices. * @@ -677,7 +670,7 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus) } /* - * pcic_pin_to_irq() is exported to ebus.c. + * pcic_pin_to_irq() is exported to bus probing code */ unsigned int pcic_pin_to_irq(unsigned int pin, const char *name) @@ -904,11 +897,6 @@ static void pcic_enable_irq(unsigned int irq_nr) local_irq_restore(flags); } -static void pcic_clear_profile_irq(int cpu) -{ - printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); -} - static void pcic_load_profile_irq(int cpu, unsigned int limit) { printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__); @@ -934,7 +922,6 @@ void __init sun4m_pci_init_IRQ(void) BTFIXUPSET_CALL(enable_pil_irq, pcic_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, pcic_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, pcic_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, pcic_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, pcic_load_profile_irq, BTFIXUPCALL_NORM); } diff --git a/arch/sparc/kernel/pmc.c b/arch/sparc/kernel/pmc.c index 7eca8871ff4..2afcfab4f11 100644 --- a/arch/sparc/kernel/pmc.c +++ b/arch/sparc/kernel/pmc.c @@ -8,11 +8,11 @@ #include <linux/fs.h> #include <linux/errno.h> #include <linux/init.h> -#include <linux/miscdevice.h> #include <linux/pm.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/oplib.h> #include <asm/uaccess.h> #include <asm/auxio.h> @@ -23,17 +23,15 @@ * #define PMC_NO_IDLE */ -#define PMC_MINOR MISC_DYNAMIC_MINOR #define PMC_OBPNAME "SUNW,pmc" #define PMC_DEVNAME "pmc" #define PMC_IDLE_REG 0x00 #define PMC_IDLE_ON 0x01 -volatile static u8 __iomem *regs; -static int pmc_regsize; +static u8 __iomem *regs; -#define pmc_readb(offs) (sbus_readb(regs+offs)) +#define pmc_readb(offs) (sbus_readb(regs+offs)) #define pmc_writeb(val, offs) (sbus_writeb(val, regs+offs)) /* @@ -53,31 +51,11 @@ void pmc_swift_idle(void) #endif } -static inline void pmc_free(void) +static int __devinit pmc_probe(struct of_device *op, + const struct of_device_id *match) { - sbus_iounmap(regs, pmc_regsize); -} - -static int __init pmc_probe(void) -{ - struct sbus_bus *sbus = NULL; - struct sbus_dev *sdev = NULL; - for_each_sbus(sbus) { - for_each_sbusdev(sdev, sbus) { - if (!strcmp(sdev->prom_name, PMC_OBPNAME)) { - goto sbus_done; - } - } - } - -sbus_done: - if (!sdev) { - return -ENODEV; - } - - pmc_regsize = sdev->reg_addrs[0].reg_size; - regs = sbus_ioremap(&sdev->resource[0], 0, - pmc_regsize, PMC_OBPNAME); + regs = of_ioremap(&op->resource[0], 0, + resource_size(&op->resource[0]), PMC_OBPNAME); if (!regs) { printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME); return -ENODEV; @@ -92,8 +70,27 @@ sbus_done: return 0; } +static struct of_device_id __initdata pmc_match[] = { + { + .name = PMC_OBPNAME, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, pmc_match); + +static struct of_platform_driver pmc_driver = { + .name = "pmc", + .match_table = pmc_match, + .probe = pmc_probe, +}; + +static int __init pmc_init(void) +{ + return of_register_driver(&pmc_driver, &of_bus_type); +} + /* This driver is not critical to the boot process * and is easiest to ioremap when SBus is already * initialized, so we install ourselves thusly: */ -__initcall(pmc_probe); +__initcall(pmc_init); diff --git a/arch/sparc/kernel/process.c b/arch/sparc/kernel/process.c index 4bb430940a6..e8c43ffe317 100644 --- a/arch/sparc/kernel/process.c +++ b/arch/sparc/kernel/process.c @@ -75,7 +75,7 @@ void cpu_idle(void) { /* endless idle loop with no priority at all */ for (;;) { - if (ARCH_SUN4C_SUN4) { + if (ARCH_SUN4C) { static int count = HZ; static unsigned long last_jiffies; static unsigned long last_faults; diff --git a/arch/sparc/kernel/prom.c b/arch/sparc/kernel/prom.c index cd4fb79aa3a..eee5efcfe50 100644 --- a/arch/sparc/kernel/prom.c +++ b/arch/sparc/kernel/prom.c @@ -54,6 +54,9 @@ int of_getintprop_default(struct device_node *np, const char *name, int def) } EXPORT_SYMBOL(of_getintprop_default); +DEFINE_MUTEX(of_set_property_mutex); +EXPORT_SYMBOL(of_set_property_mutex); + int of_set_property(struct device_node *dp, const char *name, void *val, int len) { struct property **prevp; @@ -77,7 +80,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len void *old_val = prop->value; int ret; + mutex_lock(&of_set_property_mutex); ret = prom_setprop(dp->node, (char *) name, val, len); + mutex_unlock(&of_set_property_mutex); + err = -EINVAL; if (ret >= 0) { prop->value = new_val; @@ -436,7 +442,6 @@ static void __init of_console_init(void) switch (prom_vers) { case PROM_V0: - case PROM_SUN4: skip = 0; switch (*romvec->pv_stdout) { case PROMDEV_SCREEN: diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c index 9e451b21202..24fe3078bd4 100644 --- a/arch/sparc/kernel/setup.c +++ b/arch/sparc/kernel/setup.c @@ -213,23 +213,25 @@ void __init setup_arch(char **cmdline_p) /* Initialize PROM console and command line. */ *cmdline_p = prom_getbootargs(); strcpy(boot_command_line, *cmdline_p); + parse_early_param(); /* Set sparc_cpu_model */ sparc_cpu_model = sun_unknown; - if(!strcmp(&cputypval,"sun4 ")) { sparc_cpu_model=sun4; } - if(!strcmp(&cputypval,"sun4c")) { sparc_cpu_model=sun4c; } - if(!strcmp(&cputypval,"sun4m")) { sparc_cpu_model=sun4m; } - if(!strcmp(&cputypval,"sun4s")) { sparc_cpu_model=sun4m; } /* CP-1200 with PROM 2.30 -E */ - if(!strcmp(&cputypval,"sun4d")) { sparc_cpu_model=sun4d; } - if(!strcmp(&cputypval,"sun4e")) { sparc_cpu_model=sun4e; } - if(!strcmp(&cputypval,"sun4u")) { sparc_cpu_model=sun4u; } - -#ifdef CONFIG_SUN4 - if (sparc_cpu_model != sun4) { - prom_printf("This kernel is for Sun4 architecture only.\n"); - prom_halt(); - } -#endif + if (!strcmp(&cputypval,"sun4 ")) + sparc_cpu_model = sun4; + if (!strcmp(&cputypval,"sun4c")) + sparc_cpu_model = sun4c; + if (!strcmp(&cputypval,"sun4m")) + sparc_cpu_model = sun4m; + if (!strcmp(&cputypval,"sun4s")) + sparc_cpu_model = sun4m; /* CP-1200 with PROM 2.30 -E */ + if (!strcmp(&cputypval,"sun4d")) + sparc_cpu_model = sun4d; + if (!strcmp(&cputypval,"sun4e")) + sparc_cpu_model = sun4e; + if (!strcmp(&cputypval,"sun4u")) + sparc_cpu_model = sun4u; + printk("ARCH: "); switch(sparc_cpu_model) { case sun4: @@ -263,7 +265,7 @@ void __init setup_arch(char **cmdline_p) boot_flags_init(*cmdline_p); idprom_init(); - if (ARCH_SUN4C_SUN4) + if (ARCH_SUN4C) sun4c_probe_vac(); load_mmu(); diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c index b23cea5ca5d..b0dfff84865 100644 --- a/arch/sparc/kernel/sparc_ksyms.c +++ b/arch/sparc/kernel/sparc_ksyms.c @@ -38,17 +38,12 @@ #include <asm/idprom.h> #include <asm/head.h> #include <asm/smp.h> -#include <asm/mostek.h> #include <asm/ptrace.h> #include <asm/uaccess.h> #include <asm/checksum.h> #ifdef CONFIG_SBUS -#include <asm/sbus.h> #include <asm/dma.h> #endif -#ifdef CONFIG_PCI -#include <asm/ebus.h> -#endif #include <asm/io-unit.h> #include <asm/bug.h> @@ -127,16 +122,11 @@ EXPORT_SYMBOL(phys_cpu_present_map); EXPORT_SYMBOL(__udelay); EXPORT_SYMBOL(__ndelay); EXPORT_SYMBOL(rtc_lock); -EXPORT_SYMBOL(mostek_lock); -EXPORT_SYMBOL(mstk48t02_regs); #ifdef CONFIG_SUN_AUXIO EXPORT_SYMBOL(set_auxio); EXPORT_SYMBOL(get_auxio); #endif EXPORT_SYMBOL(io_remap_pfn_range); - /* P3: iounit_xxx may be needed, sun4d users */ -/* EXPORT_SYMBOL(iounit_map_dma_init); */ -/* EXPORT_SYMBOL(iounit_map_dma_page); */ #ifndef CONFIG_SMP EXPORT_SYMBOL(BTFIXUP_CALL(___xchg32)); @@ -153,24 +143,9 @@ EXPORT_SYMBOL(BTFIXUP_CALL(mmu_release_scsi_one)); EXPORT_SYMBOL(BTFIXUP_CALL(pgprot_noncached)); #ifdef CONFIG_SBUS -EXPORT_SYMBOL(sbus_root); -EXPORT_SYMBOL(dma_chain); EXPORT_SYMBOL(sbus_set_sbus64); -EXPORT_SYMBOL(sbus_alloc_consistent); -EXPORT_SYMBOL(sbus_free_consistent); -EXPORT_SYMBOL(sbus_map_single); -EXPORT_SYMBOL(sbus_unmap_single); -EXPORT_SYMBOL(sbus_map_sg); -EXPORT_SYMBOL(sbus_unmap_sg); -EXPORT_SYMBOL(sbus_dma_sync_single_for_cpu); -EXPORT_SYMBOL(sbus_dma_sync_single_for_device); -EXPORT_SYMBOL(sbus_dma_sync_sg_for_cpu); -EXPORT_SYMBOL(sbus_dma_sync_sg_for_device); -EXPORT_SYMBOL(sbus_iounmap); -EXPORT_SYMBOL(sbus_ioremap); #endif #ifdef CONFIG_PCI -EXPORT_SYMBOL(ebus_chain); EXPORT_SYMBOL(insb); EXPORT_SYMBOL(outsb); EXPORT_SYMBOL(insw); diff --git a/arch/sparc/kernel/sun4c_irq.c b/arch/sparc/kernel/sun4c_irq.c index 340fc395fe2..5dc8a576948 100644 --- a/arch/sparc/kernel/sun4c_irq.c +++ b/arch/sparc/kernel/sun4c_irq.c @@ -18,6 +18,8 @@ #include <linux/interrupt.h> #include <linux/slab.h> #include <linux/init.h> +#include <linux/of.h> +#include <linux/of_device.h> #include "irq.h" #include <asm/ptrace.h> @@ -31,15 +33,8 @@ #include <asm/traps.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/sun4paddr.h> #include <asm/idprom.h> #include <asm/machines.h> -#include <asm/sbus.h> - -#if 0 -static struct resource sun4c_timer_eb = { "sun4c_timer" }; -static struct resource sun4c_intr_eb = { "sun4c_intr" }; -#endif /* * Bit field defines for the interrupt registers on various @@ -64,19 +59,7 @@ static struct resource sun4c_intr_eb = { "sun4c_intr" }; * * so don't go making it static, like I tried. sigh. */ -unsigned char *interrupt_enable = NULL; - -static int sun4c_pil_map[] = { 0, 1, 2, 3, 5, 7, 8, 9 }; - -static unsigned int sun4c_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sun4c_pil_map)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4c_pil_map[sbint]; -} +unsigned char __iomem *interrupt_enable = NULL; static void sun4c_disable_irq(unsigned int irq_nr) { @@ -85,7 +68,7 @@ static void sun4c_disable_irq(unsigned int irq_nr) local_irq_save(flags); irq_nr &= (NR_IRQS - 1); - current_mask = *interrupt_enable; + current_mask = sbus_readb(interrupt_enable); switch(irq_nr) { case 1: new_mask = ((current_mask) & (~(SUN4C_INT_E1))); @@ -103,7 +86,7 @@ static void sun4c_disable_irq(unsigned int irq_nr) local_irq_restore(flags); return; } - *interrupt_enable = new_mask; + sbus_writeb(new_mask, interrupt_enable); local_irq_restore(flags); } @@ -114,7 +97,7 @@ static void sun4c_enable_irq(unsigned int irq_nr) local_irq_save(flags); irq_nr &= (NR_IRQS - 1); - current_mask = *interrupt_enable; + current_mask = sbus_readb(interrupt_enable); switch(irq_nr) { case 1: new_mask = ((current_mask) | SUN4C_INT_E1); @@ -132,37 +115,22 @@ static void sun4c_enable_irq(unsigned int irq_nr) local_irq_restore(flags); return; } - *interrupt_enable = new_mask; + sbus_writeb(new_mask, interrupt_enable); local_irq_restore(flags); } -#define TIMER_IRQ 10 /* Also at level 14, but we ignore that one. */ -#define PROFILE_IRQ 14 /* Level14 ticker.. used by OBP for polling */ - -volatile struct sun4c_timer_info *sun4c_timers; +struct sun4c_timer_info { + u32 l10_count; + u32 l10_limit; + u32 l14_count; + u32 l14_limit; +}; -#ifdef CONFIG_SUN4 -/* This is an ugly hack to work around the - current timer code, and make it work with - the sun4/260 intersil - */ -volatile struct sun4c_timer_info sun4_timer; -#endif +static struct sun4c_timer_info __iomem *sun4c_timers; static void sun4c_clear_clock_irq(void) { - volatile unsigned int clear_intr; -#ifdef CONFIG_SUN4 - if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) - clear_intr = sun4_timer.timer_limit10; - else -#endif - clear_intr = sun4c_timers->timer_limit10; -} - -static void sun4c_clear_profile_irq(int cpu) -{ - /* Errm.. not sure how to do this.. */ + sbus_readl(&sun4c_timers->l10_limit); } static void sun4c_load_profile_irq(int cpu, unsigned int limit) @@ -172,41 +140,48 @@ static void sun4c_load_profile_irq(int cpu, unsigned int limit) static void __init sun4c_init_timers(irq_handler_t counter_fn) { - int irq; + const struct linux_prom_irqs *irq; + struct device_node *dp; + const u32 *addr; + int err; + + dp = of_find_node_by_name(NULL, "counter-timer"); + if (!dp) { + prom_printf("sun4c_init_timers: Unable to find counter-timer\n"); + prom_halt(); + } - /* Map the Timer chip, this is implemented in hardware inside - * the cache chip on the sun4c. - */ -#ifdef CONFIG_SUN4 - if (idprom->id_machtype == (SM_SUN4 | SM_4_260)) - sun4c_timers = &sun4_timer; - else -#endif - sun4c_timers = ioremap(SUN_TIMER_PHYSADDR, - sizeof(struct sun4c_timer_info)); + addr = of_get_property(dp, "address", NULL); + if (!addr) { + prom_printf("sun4c_init_timers: No address property\n"); + prom_halt(); + } + + sun4c_timers = (void __iomem *) (unsigned long) addr[0]; + + irq = of_get_property(dp, "intr", NULL); + if (!irq) { + prom_printf("sun4c_init_timers: No intr property\n"); + prom_halt(); + } /* Have the level 10 timer tick at 100HZ. We don't touch the * level 14 timer limit since we are letting the prom handle * them until we have a real console driver so L1-A works. */ - sun4c_timers->timer_limit10 = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4c_timers->cur_count10; - master_l10_limit = &sun4c_timers->timer_limit10; + sbus_writel((((1000000/HZ) + 1) << 10), &sun4c_timers->l10_limit); - irq = request_irq(TIMER_IRQ, - counter_fn, + master_l10_counter = &sun4c_timers->l10_count; + + err = request_irq(irq[0].pri, counter_fn, (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); + if (err) { + prom_printf("sun4c_init_timers: request_irq() fails with %d\n", err); prom_halt(); } -#if 0 - /* This does not work on 4/330 */ - sun4c_enable_irq(10); -#endif - claim_ticker14(NULL, PROFILE_IRQ, 0); + sun4c_disable_irq(irq[1].pri); } #ifdef CONFIG_SMP @@ -215,41 +190,28 @@ static void sun4c_nop(void) {} void __init sun4c_init_IRQ(void) { - struct linux_prom_registers int_regs[2]; - int ie_node; + struct device_node *dp; + const u32 *addr; - if (ARCH_SUN4) { - interrupt_enable = (char *) - ioremap(sun4_ie_physaddr, PAGE_SIZE); - } else { - struct resource phyres; - - ie_node = prom_searchsiblings (prom_getchild(prom_root_node), - "interrupt-enable"); - if(ie_node == 0) - panic("Cannot find /interrupt-enable node"); + dp = of_find_node_by_name(NULL, "interrupt-enable"); + if (!dp) { + prom_printf("sun4c_init_IRQ: Unable to find interrupt-enable\n"); + prom_halt(); + } - /* Depending on the "address" property is bad news... */ - interrupt_enable = NULL; - if (prom_getproperty(ie_node, "reg", (char *) int_regs, - sizeof(int_regs)) != -1) { - memset(&phyres, 0, sizeof(struct resource)); - phyres.flags = int_regs[0].which_io; - phyres.start = int_regs[0].phys_addr; - interrupt_enable = (char *) sbus_ioremap(&phyres, 0, - int_regs[0].reg_size, "sun4c_intr"); - } + addr = of_get_property(dp, "address", NULL); + if (!addr) { + prom_printf("sun4c_init_IRQ: No address property\n"); + prom_halt(); } - if (!interrupt_enable) - panic("Cannot map interrupt_enable"); - BTFIXUPSET_CALL(sbint_to_irq, sun4c_sbint_to_irq, BTFIXUPCALL_NORM); + interrupt_enable = (void __iomem *) (unsigned long) addr[0]; + BTFIXUPSET_CALL(enable_irq, sun4c_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4c_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, sun4c_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, sun4c_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4c_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4c_clear_profile_irq, BTFIXUPCALL_NOP); BTFIXUPSET_CALL(load_profile_irq, sun4c_load_profile_irq, BTFIXUPCALL_NOP); sparc_init_timers = sun4c_init_timers; #ifdef CONFIG_SMP @@ -257,6 +219,6 @@ void __init sun4c_init_IRQ(void) BTFIXUPSET_CALL(clear_cpu_int, sun4c_nop, BTFIXUPCALL_NOP); BTFIXUPSET_CALL(set_irq_udt, sun4c_nop, BTFIXUPCALL_NOP); #endif - *interrupt_enable = (SUN4C_INT_ENABLE); + sbus_writeb(SUN4C_INT_ENABLE, interrupt_enable); /* Cannot enable interrupts until OBP ticker is disabled. */ } diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c index 1290b5998f8..d3cb76ce418 100644 --- a/arch/sparc/kernel/sun4d_irq.c +++ b/arch/sparc/kernel/sun4d_irq.c @@ -19,6 +19,8 @@ #include <linux/smp.h> #include <linux/spinlock.h> #include <linux/seq_file.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -34,7 +36,6 @@ #include <asm/io.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/sbus.h> #include <asm/sbi.h> #include <asm/cacheflush.h> #include <asm/irq_regs.h> @@ -44,16 +45,22 @@ /* If you trust current SCSI layer to handle different SCSI IRQs, enable this. I don't trust it... -jj */ /* #define DISTRIBUTE_IRQS */ -struct sun4d_timer_regs *sun4d_timers; +struct sun4d_timer_regs { + u32 l10_timer_limit; + u32 l10_cur_countx; + u32 l10_limit_noclear; + u32 ctrl; + u32 l10_cur_count; +}; + +static struct sun4d_timer_regs __iomem *sun4d_timers; + #define TIMER_IRQ 10 #define MAX_STATIC_ALLOC 4 extern struct irqaction static_irqaction[MAX_STATIC_ALLOC]; extern int static_irq_count; -unsigned char cpu_leds[32]; -#ifdef CONFIG_SMP static unsigned char sbus_tid[32]; -#endif static struct irqaction *irq_action[NR_IRQS]; extern spinlock_t irq_action_lock; @@ -72,9 +79,9 @@ static int sbus_to_pil[] = { }; static int nsbi; -#ifdef CONFIG_SMP + +/* Exported for sun4d_smp.c */ DEFINE_SPINLOCK(sun4d_imsk_lock); -#endif int show_sun4d_interrupts(struct seq_file *p, void *v) { @@ -257,26 +264,6 @@ void sun4d_handler_irq(int irq, struct pt_regs * regs) set_irq_regs(old_regs); } -unsigned int sun4d_build_irq(struct sbus_dev *sdev, int irq) -{ - int sbusl = pil_to_sbus[irq]; - - if (sbusl) - return ((sdev->bus->board + 1) << 5) + (sbusl << 2) + sdev->slot; - else - return irq; -} - -static unsigned int sun4d_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sbus_to_pil)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4d_build_irq(sdev, sbus_to_pil[sbint]); -} - int sun4d_request_irq(unsigned int irq, irq_handler_t handler, unsigned long irqflags, const char * devname, void *dev_id) @@ -360,36 +347,28 @@ out: static void sun4d_disable_irq(unsigned int irq) { -#ifdef CONFIG_SMP int tid = sbus_tid[(irq >> 5) - 1]; unsigned long flags; -#endif - if (irq < NR_IRQS) return; -#ifdef CONFIG_SMP + if (irq < NR_IRQS) + return; + spin_lock_irqsave(&sun4d_imsk_lock, flags); cc_set_imsk_other(tid, cc_get_imsk_other(tid) | (1 << sbus_to_pil[(irq >> 2) & 7])); spin_unlock_irqrestore(&sun4d_imsk_lock, flags); -#else - cc_set_imsk(cc_get_imsk() | (1 << sbus_to_pil[(irq >> 2) & 7])); -#endif } static void sun4d_enable_irq(unsigned int irq) { -#ifdef CONFIG_SMP int tid = sbus_tid[(irq >> 5) - 1]; unsigned long flags; -#endif - if (irq < NR_IRQS) return; -#ifdef CONFIG_SMP + if (irq < NR_IRQS) + return; + spin_lock_irqsave(&sun4d_imsk_lock, flags); cc_set_imsk_other(tid, cc_get_imsk_other(tid) & ~(1 << sbus_to_pil[(irq >> 2) & 7])); spin_unlock_irqrestore(&sun4d_imsk_lock, flags); -#else - cc_set_imsk(cc_get_imsk() & ~(1 << sbus_to_pil[(irq >> 2) & 7])); -#endif } #ifdef CONFIG_SMP @@ -409,47 +388,55 @@ static void sun4d_set_udt(int cpu) /* Setup IRQ distribution scheme. */ void __init sun4d_distribute_irqs(void) { + struct device_node *dp; + #ifdef DISTRIBUTE_IRQS - struct sbus_bus *sbus; - unsigned long sbus_serving_map; + cpumask_t sbus_serving_map; sbus_serving_map = cpu_present_map; - for_each_sbus(sbus) { - if ((sbus->board * 2) == boot_cpu_id && (cpu_present_map & (1 << (sbus->board * 2 + 1)))) - sbus_tid[sbus->board] = (sbus->board * 2 + 1); - else if (cpu_present_map & (1 << (sbus->board * 2))) - sbus_tid[sbus->board] = (sbus->board * 2); - else if (cpu_present_map & (1 << (sbus->board * 2 + 1))) - sbus_tid[sbus->board] = (sbus->board * 2 + 1); + for_each_node_by_name(dp, "sbi") { + int board = of_getintprop_default(dp, "board#", 0); + + if ((board * 2) == boot_cpu_id && cpu_isset(board * 2 + 1, cpu_present_map)) + sbus_tid[board] = (board * 2 + 1); + else if (cpu_isset(board * 2, cpu_present_map)) + sbus_tid[board] = (board * 2); + else if (cpu_isset(board * 2 + 1, cpu_present_map)) + sbus_tid[board] = (board * 2 + 1); else - sbus_tid[sbus->board] = 0xff; - if (sbus_tid[sbus->board] != 0xff) - sbus_serving_map &= ~(1 << sbus_tid[sbus->board]); + sbus_tid[board] = 0xff; + if (sbus_tid[board] != 0xff) + cpu_clear(sbus_tid[board], sbus_serving_map); } - for_each_sbus(sbus) - if (sbus_tid[sbus->board] == 0xff) { + for_each_node_by_name(dp, "sbi") { + int board = of_getintprop_default(dp, "board#", 0); + if (sbus_tid[board] == 0xff) { int i = 31; - if (!sbus_serving_map) + if (cpus_empty(sbus_serving_map)) sbus_serving_map = cpu_present_map; - while (!(sbus_serving_map & (1 << i))) + while (cpu_isset(i, sbus_serving_map)) i--; - sbus_tid[sbus->board] = i; - sbus_serving_map &= ~(1 << i); + sbus_tid[board] = i; + cpu_clear(i, sbus_serving_map); } - for_each_sbus(sbus) { - printk("sbus%d IRQs directed to CPU%d\n", sbus->board, sbus_tid[sbus->board]); - set_sbi_tid(sbus->devid, sbus_tid[sbus->board] << 3); + } + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + printk("sbus%d IRQs directed to CPU%d\n", board, sbus_tid[board]); + set_sbi_tid(devid, sbus_tid[board] << 3); } #else - struct sbus_bus *sbus; int cpuid = cpu_logical_map(1); if (cpuid == -1) cpuid = cpu_logical_map(0); - for_each_sbus(sbus) { - sbus_tid[sbus->board] = cpuid; - set_sbi_tid(sbus->devid, cpuid << 3); + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + sbus_tid[board] = cpuid; + set_sbi_tid(devid, cpuid << 3); } printk("All sbus IRQs directed to CPU%d\n", cpuid); #endif @@ -458,13 +445,7 @@ void __init sun4d_distribute_irqs(void) static void sun4d_clear_clock_irq(void) { - volatile unsigned int clear_intr; - clear_intr = sun4d_timers->l10_timer_limit; -} - -static void sun4d_clear_profile_irq(int cpu) -{ - bw_get_prof_limit(cpu); + sbus_readl(&sun4d_timers->l10_timer_limit); } static void sun4d_load_profile_irq(int cpu, unsigned int limit) @@ -472,98 +453,121 @@ static void sun4d_load_profile_irq(int cpu, unsigned int limit) bw_set_prof_limit(cpu, limit); } -static void __init sun4d_init_timers(irq_handler_t counter_fn) +static void __init sun4d_load_profile_irqs(void) { - int irq; - int cpu; - struct resource r; - int mid; + int cpu = 0, mid; - /* Map the User Timer registers. */ - memset(&r, 0, sizeof(r)); + while (!cpu_find_by_instance(cpu, NULL, &mid)) { + sun4d_load_profile_irq(mid >> 3, 0); + cpu++; + } +} + +static void __init sun4d_fixup_trap_table(void) +{ #ifdef CONFIG_SMP - r.start = CSR_BASE(boot_cpu_id)+BW_TIMER_LIMIT; -#else - r.start = CSR_BASE(0)+BW_TIMER_LIMIT; + unsigned long flags; + extern unsigned long lvl14_save[4]; + struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; + extern unsigned int real_irq_entry[], smp4d_ticker[]; + extern unsigned int patchme_maybe_smp_msg[]; + + /* Adjust so that we jump directly to smp4d_ticker */ + lvl14_save[2] += smp4d_ticker - real_irq_entry; + + /* For SMP we use the level 14 ticker, however the bootup code + * has copied the firmware's level 14 vector into the boot cpu's + * trap table, we must fix this now or we get squashed. + */ + local_irq_save(flags); + patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ + trap_table->inst_one = lvl14_save[0]; + trap_table->inst_two = lvl14_save[1]; + trap_table->inst_three = lvl14_save[2]; + trap_table->inst_four = lvl14_save[3]; + local_flush_cache_all(); + local_irq_restore(flags); #endif - r.flags = 0xf; - sun4d_timers = (struct sun4d_timer_regs *) sbus_ioremap(&r, 0, - PAGE_SIZE, "user timer"); +} - sun4d_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4d_timers->l10_cur_count; - master_l10_limit = &sun4d_timers->l10_timer_limit; +static void __init sun4d_init_timers(irq_handler_t counter_fn) +{ + struct device_node *dp; + struct resource res; + const u32 *reg; + int err; + + dp = of_find_node_by_name(NULL, "cpu-unit"); + if (!dp) { + prom_printf("sun4d_init_timers: Unable to find cpu-unit\n"); + prom_halt(); + } - irq = request_irq(TIMER_IRQ, - counter_fn, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); + /* Which cpu-unit we use is arbitrary, we can view the bootbus timer + * registers via any cpu's mapping. The first 'reg' property is the + * bootbus. + */ + reg = of_get_property(dp, "reg", NULL); + if (!reg) { + prom_printf("sun4d_init_timers: No reg property\n"); prom_halt(); } - - /* Enable user timer free run for CPU 0 in BW */ - /* bw_set_ctrl(0, bw_get_ctrl(0) | BW_CTRL_USER_TIMER); */ - cpu = 0; - while (!cpu_find_by_instance(cpu, NULL, &mid)) { - sun4d_load_profile_irq(mid >> 3, 0); - cpu++; + res.start = reg[1]; + res.end = reg[2] - 1; + res.flags = reg[0] & 0xff; + sun4d_timers = of_ioremap(&res, BW_TIMER_LIMIT, + sizeof(struct sun4d_timer_regs), "user timer"); + if (!sun4d_timers) { + prom_printf("sun4d_init_timers: Can't map timer regs\n"); + prom_halt(); } - -#ifdef CONFIG_SMP - { - unsigned long flags; - extern unsigned long lvl14_save[4]; - struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)]; - extern unsigned int real_irq_entry[], smp4d_ticker[]; - extern unsigned int patchme_maybe_smp_msg[]; - - /* Adjust so that we jump directly to smp4d_ticker */ - lvl14_save[2] += smp4d_ticker - real_irq_entry; - - /* For SMP we use the level 14 ticker, however the bootup code - * has copied the firmware's level 14 vector into the boot cpu's - * trap table, we must fix this now or we get squashed. - */ - local_irq_save(flags); - patchme_maybe_smp_msg[0] = 0x01000000; /* NOP out the branch */ - trap_table->inst_one = lvl14_save[0]; - trap_table->inst_two = lvl14_save[1]; - trap_table->inst_three = lvl14_save[2]; - trap_table->inst_four = lvl14_save[3]; - local_flush_cache_all(); - local_irq_restore(flags); + + sbus_writel((((1000000/HZ) + 1) << 10), &sun4d_timers->l10_timer_limit); + + master_l10_counter = &sun4d_timers->l10_cur_count; + + err = request_irq(TIMER_IRQ, counter_fn, + (IRQF_DISABLED | SA_STATIC_ALLOC), + "timer", NULL); + if (err) { + prom_printf("sun4d_init_timers: request_irq() failed with %d\n", err); + prom_halt(); } -#endif + sun4d_load_profile_irqs(); + sun4d_fixup_trap_table(); } void __init sun4d_init_sbi_irq(void) { - struct sbus_bus *sbus; - unsigned mask; + struct device_node *dp; + int target_cpu = 0; + +#ifdef CONFIG_SMP + target_cpu = boot_cpu_id; +#endif nsbi = 0; - for_each_sbus(sbus) + for_each_node_by_name(dp, "sbi") nsbi++; sbus_actions = kzalloc (nsbi * 8 * 4 * sizeof(struct sbus_action), GFP_ATOMIC); if (!sbus_actions) { prom_printf("SUN4D: Cannot allocate sbus_actions, halting.\n"); prom_halt(); } - for_each_sbus(sbus) { -#ifdef CONFIG_SMP - extern unsigned char boot_cpu_id; - - set_sbi_tid(sbus->devid, boot_cpu_id << 3); - sbus_tid[sbus->board] = boot_cpu_id; -#endif + for_each_node_by_name(dp, "sbi") { + int devid = of_getintprop_default(dp, "device-id", 0); + int board = of_getintprop_default(dp, "board#", 0); + unsigned int mask; + + set_sbi_tid(devid, target_cpu << 3); + sbus_tid[board] = target_cpu; + /* Get rid of pending irqs from PROM */ - mask = acquire_sbi(sbus->devid, 0xffffffff); + mask = acquire_sbi(devid, 0xffffffff); if (mask) { - printk ("Clearing pending IRQs %08x on SBI %d\n", mask, sbus->board); - release_sbi(sbus->devid, mask); + printk ("Clearing pending IRQs %08x on SBI %d\n", mask, board); + release_sbi(devid, mask); } } } @@ -572,11 +576,9 @@ void __init sun4d_init_IRQ(void) { local_irq_disable(); - BTFIXUPSET_CALL(sbint_to_irq, sun4d_sbint_to_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_irq, sun4d_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4d_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4d_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4d_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4d_load_profile_irq, BTFIXUPCALL_NORM); sparc_init_timers = sun4d_init_timers; #ifdef CONFIG_SMP diff --git a/arch/sparc/kernel/sun4d_smp.c b/arch/sparc/kernel/sun4d_smp.c index 69596402a50..7a6a5e79592 100644 --- a/arch/sparc/kernel/sun4d_smp.c +++ b/arch/sparc/kernel/sun4d_smp.c @@ -20,6 +20,7 @@ #include <linux/swap.h> #include <linux/profile.h> #include <linux/delay.h> +#include <linux/cpu.h> #include <asm/ptrace.h> #include <asm/atomic.h> @@ -30,7 +31,6 @@ #include <asm/pgalloc.h> #include <asm/pgtable.h> #include <asm/oplib.h> -#include <asm/sbus.h> #include <asm/sbi.h> #include <asm/tlbflush.h> #include <asm/cacheflush.h> @@ -72,6 +72,17 @@ static void smp_setup_percpu_timer(void); extern void cpu_probe(void); extern void sun4d_distribute_irqs(void); +static unsigned char cpu_leds[32]; + +static inline void show_leds(int cpuid) +{ + cpuid &= 0x1e; + __asm__ __volatile__ ("stba %0, [%1] %2" : : + "r" ((cpu_leds[cpuid] << 4) | cpu_leds[cpuid+1]), + "r" (ECSR_BASE(cpuid) | BB_LEDS), + "i" (ASI_M_CTL)); +} + void __init smp4d_callin(void) { int cpuid = hard_smp4d_processor_id(); @@ -88,6 +99,7 @@ void __init smp4d_callin(void) local_flush_cache_all(); local_flush_tlb_all(); + notify_cpu_starting(cpuid); /* * Unblock the master CPU _only_ when the scheduler state * of all secondary CPUs will be up-to-date, so after diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 94e02de960e..f10317179ee 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -20,6 +20,8 @@ #include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/ptrace.h> #include <asm/processor.h> @@ -35,59 +37,27 @@ #include <asm/smp.h> #include <asm/irq.h> #include <asm/io.h> -#include <asm/sbus.h> #include <asm/cacheflush.h> #include "irq.h" -/* On the sun4m, just like the timers, we have both per-cpu and master - * interrupt registers. - */ - -/* These registers are used for sending/receiving irqs from/to - * different cpu's. - */ -struct sun4m_intreg_percpu { - unsigned int tbt; /* Interrupts still pending for this cpu. */ - - /* These next two registers are WRITE-ONLY and are only - * "on bit" sensitive, "off bits" written have NO affect. - */ - unsigned int clear; /* Clear this cpus irqs here. */ - unsigned int set; /* Set this cpus irqs here. */ - unsigned char space[PAGE_SIZE - 12]; +struct sun4m_irq_percpu { + u32 pending; + u32 clear; + u32 set; }; -/* - * djhr - * Actually the clear and set fields in this struct are misleading.. - * according to the SLAVIO manual (and the same applies for the SEC) - * the clear field clears bits in the mask which will ENABLE that IRQ - * the set field sets bits in the mask to DISABLE the IRQ. - * - * Also the undirected_xx address in the SLAVIO is defined as - * RESERVED and write only.. - * - * DAVEM_NOTE: The SLAVIO only specifies behavior on uniprocessor - * sun4m machines, for MP the layout makes more sense. - */ -struct sun4m_intregs { - struct sun4m_intreg_percpu cpu_intregs[SUN4M_NCPUS]; - unsigned int tbt; /* IRQ's that are still pending. */ - unsigned int irqs; /* Master IRQ bits. */ - - /* Again, like the above, two these registers are WRITE-ONLY. */ - unsigned int clear; /* Clear master IRQ's by setting bits here. */ - unsigned int set; /* Set master IRQ's by setting bits here. */ - - /* This register is both READ and WRITE. */ - unsigned int undirected_target; /* Which cpu gets undirected irqs. */ +struct sun4m_irq_global { + u32 pending; + u32 mask; + u32 mask_clear; + u32 mask_set; + u32 interrupt_target; }; -static unsigned long dummy; - -struct sun4m_intregs *sun4m_interrupts; -unsigned long *irq_rcvreg = &dummy; +/* Code in entry.S needs to get at these register mappings. */ +struct sun4m_irq_percpu __iomem *sun4m_irq_percpu[SUN4M_NCPUS]; +struct sun4m_irq_global __iomem *sun4m_irq_global; /* Dave Redman (djhr@tadpole.co.uk) * The sun4m interrupt registers. @@ -101,8 +71,9 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_MASKALL 0x80000000 /* mask all interrupts */ #define SUN4M_INT_MODULE_ERR 0x40000000 /* module error */ -#define SUN4M_INT_M2S_WRITE 0x20000000 /* write buffer error */ -#define SUN4M_INT_ECC 0x10000000 /* ecc memory error */ +#define SUN4M_INT_M2S_WRITE_ERR 0x20000000 /* write buffer error */ +#define SUN4M_INT_ECC_ERR 0x10000000 /* ecc memory error */ +#define SUN4M_INT_VME_ERR 0x08000000 /* vme async error */ #define SUN4M_INT_FLOPPY 0x00400000 /* floppy disk */ #define SUN4M_INT_MODULE 0x00200000 /* module interrupt */ #define SUN4M_INT_VIDEO 0x00100000 /* onboard video */ @@ -113,75 +84,126 @@ unsigned long *irq_rcvreg = &dummy; #define SUN4M_INT_SERIAL 0x00008000 /* serial ports */ #define SUN4M_INT_KBDMS 0x00004000 /* keyboard/mouse */ #define SUN4M_INT_SBUSBITS 0x00003F80 /* sbus int bits */ +#define SUN4M_INT_VMEBITS 0x0000007F /* vme int bits */ + +#define SUN4M_INT_ERROR (SUN4M_INT_MODULE_ERR | \ + SUN4M_INT_M2S_WRITE_ERR | \ + SUN4M_INT_ECC_ERR | \ + SUN4M_INT_VME_ERR) #define SUN4M_INT_SBUS(x) (1 << (x+7)) #define SUN4M_INT_VME(x) (1 << (x)) -/* These tables only apply for interrupts greater than 15.. - * - * any intr value below 0x10 is considered to be a soft-int - * this may be useful or it may not.. but that's how I've done it. - * and it won't clash with what OBP is telling us about devices. +/* Interrupt levels used by OBP */ +#define OBP_INT_LEVEL_SOFT 0x10 +#define OBP_INT_LEVEL_ONBOARD 0x20 +#define OBP_INT_LEVEL_SBUS 0x30 +#define OBP_INT_LEVEL_VME 0x40 + +/* Interrupt level assignment on sun4m: + * + * level source + * ------------------------------------------------------------ + * 1 softint-1 + * 2 softint-2, VME/SBUS level 1 + * 3 softint-3, VME/SBUS level 2 + * 4 softint-4, onboard SCSI + * 5 softint-5, VME/SBUS level 3 + * 6 softint-6, onboard ETHERNET + * 7 softint-7, VME/SBUS level 4 + * 8 softint-8, onboard VIDEO + * 9 softint-9, VME/SBUS level 5, Module Interrupt + * 10 softint-10, system counter/timer + * 11 softint-11, VME/SBUS level 6, Floppy + * 12 softint-12, Keyboard/Mouse, Serial + * 13 softint-13, VME/SBUS level 7, ISDN Audio + * 14 softint-14, per-processor counter/timer + * 15 softint-15, Asynchronous Errors (broadcast) * - * take an encoded intr value and lookup if it's valid - * then get the mask bits that match from irq_mask + * Each interrupt source is masked distinctly in the sun4m interrupt + * registers. The PIL level alone is therefore ambiguous, since multiple + * interrupt sources map to a single PIL. * - * P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee. + * This ambiguity is resolved in the 'intr' property for device nodes + * in the OF device tree. Each 'intr' property entry is composed of + * two 32-bit words. The first word is the IRQ priority value, which + * is what we're intersted in. The second word is the IRQ vector, which + * is unused. + * + * The low 4 bits of the IRQ priority indicate the PIL, and the upper + * 4 bits indicate onboard vs. SBUS leveled vs. VME leveled. 0x20 + * means onboard, 0x30 means SBUS leveled, and 0x40 means VME leveled. + * + * For example, an 'intr' IRQ priority value of 0x24 is onboard SCSI + * whereas a value of 0x33 is SBUS level 2. Here are some sample + * 'intr' property IRQ priority values from ss4, ss5, ss10, ss20, and + * Tadpole S3 GX systems. + * + * esp: 0x24 onboard ESP SCSI + * le: 0x26 onboard Lance ETHERNET + * p9100: 0x32 SBUS level 1 P9100 video + * bpp: 0x33 SBUS level 2 BPP parallel port device + * DBRI: 0x39 SBUS level 5 DBRI ISDN audio + * SUNW,leo: 0x39 SBUS level 5 LEO video + * pcmcia: 0x3b SBUS level 6 PCMCIA controller + * uctrl: 0x3b SBUS level 6 UCTRL device + * modem: 0x3d SBUS level 7 MODEM + * zs: 0x2c onboard keyboard/mouse/serial + * floppy: 0x2b onboard Floppy + * power: 0x22 onboard power device (XXX unknown mask bit XXX) */ -static unsigned char irq_xlate[32] = { - /* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */ - 0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7, - 0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0 -}; -static unsigned long irq_mask[] = { - 0, /* illegal index */ - SUN4M_INT_SCSI, /* 1 irq 4 */ - SUN4M_INT_ETHERNET, /* 2 irq 6 */ - SUN4M_INT_VIDEO, /* 3 irq 8 */ - SUN4M_INT_REALTIME, /* 4 irq 10 */ - SUN4M_INT_FLOPPY, /* 5 irq 11 */ - (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */ - SUN4M_INT_MODULE_ERR, /* 7 irq 15 */ - SUN4M_INT_SBUS(0), /* 8 irq 2 */ - SUN4M_INT_SBUS(1), /* 9 irq 3 */ - SUN4M_INT_SBUS(2), /* 10 irq 5 */ - SUN4M_INT_SBUS(3), /* 11 irq 7 */ - SUN4M_INT_SBUS(4), /* 12 irq 9 */ - SUN4M_INT_SBUS(5), /* 13 irq 11 */ - SUN4M_INT_SBUS(6) /* 14 irq 13 */ +static unsigned long irq_mask[0x50] = { + /* SMP */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* soft */ + 0, SUN4M_SOFT_INT(1), + SUN4M_SOFT_INT(2), SUN4M_SOFT_INT(3), + SUN4M_SOFT_INT(4), SUN4M_SOFT_INT(5), + SUN4M_SOFT_INT(6), SUN4M_SOFT_INT(7), + SUN4M_SOFT_INT(8), SUN4M_SOFT_INT(9), + SUN4M_SOFT_INT(10), SUN4M_SOFT_INT(11), + SUN4M_SOFT_INT(12), SUN4M_SOFT_INT(13), + SUN4M_SOFT_INT(14), SUN4M_SOFT_INT(15), + /* onboard */ + 0, 0, 0, 0, + SUN4M_INT_SCSI, 0, SUN4M_INT_ETHERNET, 0, + SUN4M_INT_VIDEO, SUN4M_INT_MODULE, + SUN4M_INT_REALTIME, SUN4M_INT_FLOPPY, + (SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), + SUN4M_INT_AUDIO, 0, SUN4M_INT_MODULE_ERR, + /* sbus */ + 0, 0, SUN4M_INT_SBUS(0), SUN4M_INT_SBUS(1), + 0, SUN4M_INT_SBUS(2), 0, SUN4M_INT_SBUS(3), + 0, SUN4M_INT_SBUS(4), 0, SUN4M_INT_SBUS(5), + 0, SUN4M_INT_SBUS(6), 0, 0, + /* vme */ + 0, 0, SUN4M_INT_VME(0), SUN4M_INT_VME(1), + 0, SUN4M_INT_VME(2), 0, SUN4M_INT_VME(3), + 0, SUN4M_INT_VME(4), 0, SUN4M_INT_VME(5), + 0, SUN4M_INT_VME(6), 0, 0 }; -static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 }; - -static unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, - unsigned int sbint) -{ - if (sbint >= sizeof(sun4m_pil_map)) { - printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint); - BUG(); - } - return sun4m_pil_map[sbint] | 0x30; -} - static unsigned long sun4m_get_irqmask(unsigned int irq) { unsigned long mask; - if (irq > 0x20) { - /* OBIO/SBUS interrupts */ - irq &= 0x1f; - mask = irq_mask[irq_xlate[irq]]; - if (!mask) - printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq); - } else { - /* Soft Interrupts will come here. - * Currently there is no way to trigger them but I'm sure - * something could be cooked up. - */ - irq &= 0xf; - mask = SUN4M_SOFT_INT(irq); - } + if (irq < 0x50) + mask = irq_mask[irq]; + else + mask = 0; + + if (!mask) + printk(KERN_ERR "sun4m_get_irqmask: IRQ%d has no valid mask!\n", + irq); + return mask; } @@ -193,9 +215,9 @@ static void sun4m_disable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->set = mask; + sbus_writel(mask, &sun4m_irq_global->mask_set); else - sun4m_interrupts->cpu_intregs[cpu].set = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); local_irq_restore(flags); } @@ -212,13 +234,13 @@ static void sun4m_enable_irq(unsigned int irq_nr) mask = sun4m_get_irqmask(irq_nr); local_irq_save(flags); if (irq_nr > 15) - sun4m_interrupts->clear = mask; + sbus_writel(mask, &sun4m_irq_global->mask_clear); else - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); local_irq_restore(flags); } else { local_irq_save(flags); - sun4m_interrupts->clear = SUN4M_INT_FLOPPY; + sbus_writel(SUN4M_INT_FLOPPY, &sun4m_irq_global->mask_clear); local_irq_restore(flags); } } @@ -236,10 +258,10 @@ static unsigned long cpu_pil_to_imask[16] = { /*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR, /*10*/ SUN4M_INT_REALTIME, /*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY, -/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, -/*13*/ SUN4M_INT_AUDIO, +/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS, +/*13*/ SUN4M_INT_SBUS(6) | SUN4M_INT_VME(6) | SUN4M_INT_AUDIO, /*14*/ SUN4M_INT_E14, -/*15*/ 0x00000000 +/*15*/ SUN4M_INT_ERROR }; /* We assume the caller has disabled local interrupts when these are called, @@ -247,126 +269,141 @@ static unsigned long cpu_pil_to_imask[16] = { */ static void sun4m_disable_pil_irq(unsigned int pil) { - sun4m_interrupts->set = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_set); } static void sun4m_enable_pil_irq(unsigned int pil) { - sun4m_interrupts->clear = cpu_pil_to_imask[pil]; + sbus_writel(cpu_pil_to_imask[pil], &sun4m_irq_global->mask_clear); } #ifdef CONFIG_SMP static void sun4m_send_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].set = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->set); } static void sun4m_clear_ipi(int cpu, int level) { - unsigned long mask; - - mask = sun4m_get_irqmask(level); - sun4m_interrupts->cpu_intregs[cpu].clear = mask; + unsigned long mask = sun4m_get_irqmask(level); + sbus_writel(mask, &sun4m_irq_percpu[cpu]->clear); } static void sun4m_set_udt(int cpu) { - sun4m_interrupts->undirected_target = cpu; + sbus_writel(cpu, &sun4m_irq_global->interrupt_target); } #endif -#define OBIO_INTR 0x20 -#define TIMER_IRQ (OBIO_INTR | 10) -#define PROFILE_IRQ (OBIO_INTR | 14) +struct sun4m_timer_percpu { + u32 l14_limit; + u32 l14_count; + u32 l14_limit_noclear; + u32 user_timer_start_stop; +}; + +static struct sun4m_timer_percpu __iomem *timers_percpu[SUN4M_NCPUS]; + +struct sun4m_timer_global { + u32 l10_limit; + u32 l10_count; + u32 l10_limit_noclear; + u32 reserved; + u32 timer_config; +}; + +static struct sun4m_timer_global __iomem *timers_global; + +#define TIMER_IRQ (OBP_INT_LEVEL_ONBOARD | 10) -static struct sun4m_timer_regs *sun4m_timers; unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10); static void sun4m_clear_clock_irq(void) { - volatile unsigned int clear_intr; - clear_intr = sun4m_timers->l10_timer_limit; + sbus_readl(&timers_global->l10_limit); } -static void sun4m_clear_profile_irq(int cpu) +void sun4m_nmi(struct pt_regs *regs) { - volatile unsigned int clear; - - clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit; + unsigned long afsr, afar, si; + + printk(KERN_ERR "Aieee: sun4m NMI received!\n"); + /* XXX HyperSparc hack XXX */ + __asm__ __volatile__("mov 0x500, %%g1\n\t" + "lda [%%g1] 0x4, %0\n\t" + "mov 0x600, %%g1\n\t" + "lda [%%g1] 0x4, %1\n\t" : + "=r" (afsr), "=r" (afar)); + printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar); + si = sbus_readl(&sun4m_irq_global->pending); + printk(KERN_ERR "si=%08lx\n", si); + if (si & SUN4M_INT_MODULE_ERR) + printk(KERN_ERR "Module async error\n"); + if (si & SUN4M_INT_M2S_WRITE_ERR) + printk(KERN_ERR "MBus/SBus async error\n"); + if (si & SUN4M_INT_ECC_ERR) + printk(KERN_ERR "ECC memory error\n"); + if (si & SUN4M_INT_VME_ERR) + printk(KERN_ERR "VME async error\n"); + printk(KERN_ERR "you lose buddy boy...\n"); + show_regs(regs); + prom_halt(); +} + +/* Exported for sun4m_smp.c */ +void sun4m_clear_profile_irq(int cpu) +{ + sbus_readl(&timers_percpu[cpu]->l14_limit); } static void sun4m_load_profile_irq(int cpu, unsigned int limit) { - sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit; + sbus_writel(limit, &timers_percpu[cpu]->l14_limit); } static void __init sun4m_init_timers(irq_handler_t counter_fn) { - int reg_count, irq, cpu; - struct linux_prom_registers cnt_regs[PROMREG_MAX]; - int obio_node, cnt_node; - struct resource r; - - cnt_node = 0; - if((obio_node = - prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 || - (obio_node = prom_getchild (obio_node)) == 0 || - (cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) { - prom_printf("Cannot find /obio/counter node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "counter"); + int i, err, len, num_cpu_timers; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n"); + return; } - reg_count = prom_getproperty(cnt_node, "reg", - (void *) cnt_regs, sizeof(cnt_regs)); - reg_count = (reg_count/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to the timer registers. */ - prom_apply_obio_ranges(cnt_regs, reg_count); - - cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr; - cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size; - cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io; - for(obio_node = 1; obio_node < 4; obio_node++) { - cnt_regs[obio_node].phys_addr = - cnt_regs[obio_node-1].phys_addr + PAGE_SIZE; - cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size; - cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n"); + return; } - memset((char*)&r, 0, sizeof(struct resource)); - /* Map the per-cpu Counter registers. */ - r.flags = cnt_regs[0].which_io; - r.start = cnt_regs[0].phys_addr; - sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt"); - /* Map the system Counter register. */ - /* XXX Here we expect consequent calls to yeld adjusent maps. */ - r.flags = cnt_regs[4].which_io; - r.start = cnt_regs[4].phys_addr; - sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt"); - - sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10); - master_l10_counter = &sun4m_timers->l10_cur_count; - master_l10_limit = &sun4m_timers->l10_timer_limit; - - irq = request_irq(TIMER_IRQ, - counter_fn, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "timer", NULL); - if (irq) { - prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ); - prom_halt(); + num_cpu_timers = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_timers; i++) { + timers_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; } - - if (!cpu_find_by_instance(1, NULL, NULL)) { - for(cpu = 0; cpu < 4; cpu++) - sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0; - sun4m_interrupts->set = SUN4M_INT_E14; - } else { - sun4m_timers->cpu_timers[0].l14_timer_limit = 0; + timers_global = (void __iomem *) + (unsigned long) addr[num_cpu_timers]; + + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); + + master_l10_counter = &timers_global->l10_count; + + err = request_irq(TIMER_IRQ, counter_fn, + (IRQF_DISABLED | SA_STATIC_ALLOC), "timer", NULL); + if (err) { + printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n", + err); + return; } + + for (i = 0; i < num_cpu_timers; i++) + sbus_writel(0, &timers_percpu[i]->l14_limit); + if (num_cpu_timers == 4) + sbus_writel(SUN4M_INT_E14, &sun4m_irq_global->mask_set); + #ifdef CONFIG_SMP { unsigned long flags; @@ -390,70 +427,43 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) void __init sun4m_init_IRQ(void) { - int ie_node,i; - struct linux_prom_registers int_regs[PROMREG_MAX]; - int num_regs; - struct resource r; - int mid; - - local_irq_disable(); - if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 || - (ie_node = prom_getchild (ie_node)) == 0 || - (ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) { - prom_printf("Cannot find /obio/interrupt node\n"); - prom_halt(); + struct device_node *dp = of_find_node_by_name(NULL, "interrupt"); + int len, i, mid, num_cpu_iregs; + const u32 *addr; + + if (!dp) { + printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n"); + return; } - num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs, - sizeof(int_regs)); - num_regs = (num_regs/sizeof(struct linux_prom_registers)); - - /* Apply the obio ranges to these registers. */ - prom_apply_obio_ranges(int_regs, num_regs); - - int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr; - int_regs[4].reg_size = int_regs[num_regs-1].reg_size; - int_regs[4].which_io = int_regs[num_regs-1].which_io; - for(ie_node = 1; ie_node < 4; ie_node++) { - int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE; - int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size; - int_regs[ie_node].which_io = int_regs[ie_node-1].which_io; + + addr = of_get_property(dp, "address", &len); + if (!addr) { + printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n"); + return; } - memset((char *)&r, 0, sizeof(struct resource)); - /* Map the interrupt registers for all possible cpus. */ - r.flags = int_regs[0].which_io; - r.start = int_regs[0].phys_addr; - sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0, - PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu"); + num_cpu_iregs = (len / sizeof(u32)) - 1; + for (i = 0; i < num_cpu_iregs; i++) { + sun4m_irq_percpu[i] = (void __iomem *) + (unsigned long) addr[i]; + } + sun4m_irq_global = (void __iomem *) + (unsigned long) addr[num_cpu_iregs]; - /* Map the system interrupt control registers. */ - r.flags = int_regs[4].which_io; - r.start = int_regs[4].phys_addr; - sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system"); + local_irq_disable(); - sun4m_interrupts->set = ~SUN4M_INT_MASKALL; + sbus_writel(~SUN4M_INT_MASKALL, &sun4m_irq_global->mask_set); for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++) - sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff; - - if (!cpu_find_by_instance(1, NULL, NULL)) { - /* system wide interrupts go to cpu 0, this should always - * be safe because it is guaranteed to be fitted or OBP doesn't - * come up - * - * Not sure, but writing here on SLAVIO systems may puke - * so I don't do it unless there is more than 1 cpu. - */ - irq_rcvreg = (unsigned long *) - &sun4m_interrupts->undirected_target; - sun4m_interrupts->undirected_target = 0; - } - BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM); + sbus_writel(~0x17fff, &sun4m_irq_percpu[mid]->clear); + + if (num_cpu_iregs == 4) + sbus_writel(0, &sun4m_irq_global->interrupt_target); + BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM); sparc_init_timers = sun4m_init_timers; #ifdef CONFIG_SMP @@ -461,5 +471,6 @@ void __init sun4m_init_IRQ(void) BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM); #endif + /* Cannot enable interrupts until OBP ticker is disabled. */ } diff --git a/arch/sparc/kernel/sun4m_smp.c b/arch/sparc/kernel/sun4m_smp.c index a14a76ac7f3..5fc386d08c4 100644 --- a/arch/sparc/kernel/sun4m_smp.c +++ b/arch/sparc/kernel/sun4m_smp.c @@ -17,6 +17,7 @@ #include <linux/swap.h> #include <linux/profile.h> #include <linux/delay.h> +#include <linux/cpu.h> #include <asm/cacheflush.h> #include <asm/tlbflush.h> @@ -71,6 +72,8 @@ void __cpuinit smp4m_callin(void) local_flush_cache_all(); local_flush_tlb_all(); + notify_cpu_starting(cpuid); + /* Get our local ticker going. */ smp_setup_percpu_timer(); @@ -313,6 +316,8 @@ void smp4m_cross_call_irq(void) ccall_info.processors_out[i] = 1; } +extern void sun4m_clear_profile_irq(int cpu); + void smp4m_percpu_timer_interrupt(struct pt_regs *regs) { struct pt_regs *old_regs; @@ -320,7 +325,7 @@ void smp4m_percpu_timer_interrupt(struct pt_regs *regs) old_regs = set_irq_regs(regs); - clear_profile_irq(cpu); + sun4m_clear_profile_irq(cpu); profile_tick(CPU_PROFILING); diff --git a/arch/sparc/kernel/sun4setup.c b/arch/sparc/kernel/sun4setup.c deleted file mode 100644 index 229a52f55f1..00000000000 --- a/arch/sparc/kernel/sun4setup.c +++ /dev/null @@ -1,75 +0,0 @@ -/* sun4setup.c: Setup the hardware address of various items in the sun4 - * architecture. Called from idprom_init - * - * Copyright (C) 1998 Chris G. Davis (cdavis@cois.on.ca) - */ - -#include <asm/page.h> -#include <asm/oplib.h> -#include <asm/idprom.h> -#include <asm/sun4paddr.h> -#include <asm/machines.h> - -int sun4_memreg_physaddr; -int sun4_ie_physaddr; -int sun4_clock_physaddr; -int sun4_timer_physaddr; -int sun4_eth_physaddr; -int sun4_si_physaddr; -int sun4_bwtwo_physaddr; -int sun4_zs0_physaddr; -int sun4_zs1_physaddr; -int sun4_dma_physaddr; -int sun4_esp_physaddr; -int sun4_ie_physaddr; - -void __init sun4setup(void) -{ - printk("Sun4 Hardware Setup v1.0 18/May/98 Chris Davis (cdavis@cois.on.ca). "); - /* - setup standard sun4 info - */ - sun4_ie_physaddr=SUN4_IE_PHYSADDR; - - /* - setup model specific info - */ - switch(idprom->id_machtype) { - case (SM_SUN4 | SM_4_260 ): - printk("Setup for a SUN4/260\n"); - sun4_memreg_physaddr=SUN4_200_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_200_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_eth_physaddr=SUN4_200_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_200_SI_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_200_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_esp_physaddr=SUN4_UNUSED_PHYSADDR; - break; - case (SM_SUN4 | SM_4_330 ): - printk("Setup for a SUN4/330\n"); - sun4_memreg_physaddr=SUN4_300_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_300_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_300_TIMER_PHYSADDR; - sun4_eth_physaddr=SUN4_300_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_300_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_300_DMA_PHYSADDR; - sun4_esp_physaddr=SUN4_300_ESP_PHYSADDR; - break; - case (SM_SUN4 | SM_4_470 ): - printk("Setup for a SUN4/470\n"); - sun4_memreg_physaddr=SUN4_400_MEMREG_PHYSADDR; - sun4_clock_physaddr=SUN4_400_CLOCK_PHYSADDR; - sun4_timer_physaddr=SUN4_400_TIMER_PHYSADDR; - sun4_eth_physaddr=SUN4_400_ETH_PHYSADDR; - sun4_si_physaddr=SUN4_UNUSED_PHYSADDR; - sun4_bwtwo_physaddr=SUN4_400_BWTWO_PHYSADDR; - sun4_dma_physaddr=SUN4_400_DMA_PHYSADDR; - sun4_esp_physaddr=SUN4_400_ESP_PHYSADDR; - break; - default: - ; - } -} - diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c index 4d73421559c..03035c852a4 100644 --- a/arch/sparc/kernel/sys_sparc.c +++ b/arch/sparc/kernel/sys_sparc.c @@ -53,7 +53,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi /* See asm-sparc/uaccess.h */ if (len > TASK_SIZE - PAGE_SIZE) return -ENOMEM; - if (ARCH_SUN4C_SUN4 && len > 0x20000000) + if (ARCH_SUN4C && len > 0x20000000) return -ENOMEM; if (!addr) addr = TASK_UNMAPPED_BASE; @@ -65,7 +65,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi for (vmm = find_vma(current->mm, addr); ; vmm = vmm->vm_next) { /* At this point: (!vmm || addr < vmm->vm_end). */ - if (ARCH_SUN4C_SUN4 && addr < 0xe0000000 && 0x20000000 - len < addr) { + if (ARCH_SUN4C && addr < 0xe0000000 && 0x20000000 - len < addr) { addr = PAGE_OFFSET; vmm = find_vma(current->mm, PAGE_OFFSET); } @@ -81,7 +81,7 @@ unsigned long arch_get_unmapped_area(struct file *filp, unsigned long addr, unsi asmlinkage unsigned long sparc_brk(unsigned long brk) { - if(ARCH_SUN4C_SUN4) { + if(ARCH_SUN4C) { if ((brk & 0xe0000000) != (current->mm->brk & 0xe0000000)) return current->mm->brk; } @@ -221,7 +221,7 @@ out: int sparc_mmap_check(unsigned long addr, unsigned long len) { - if (ARCH_SUN4C_SUN4 && + if (ARCH_SUN4C && (len > 0x20000000 || (addr < 0xe0000000 && addr + len > 0x20000000))) return -EINVAL; diff --git a/arch/sparc/kernel/tick14.c b/arch/sparc/kernel/tick14.c index 707bfda8657..138bbf5f872 100644 --- a/arch/sparc/kernel/tick14.c +++ b/arch/sparc/kernel/tick14.c @@ -1,31 +1,12 @@ /* tick14.c - * linux/arch/sparc/kernel/tick14.c * * Copyright (C) 1996 David Redman (djhr@tadpole.co.uk) * * This file handles the Sparc specific level14 ticker * This is really useful for profiling OBP uses it for keyboard * aborts and other stuff. - * - * */ -#include <linux/errno.h> -#include <linux/sched.h> #include <linux/kernel.h> -#include <linux/param.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/timex.h> -#include <linux/interrupt.h> - -#include <asm/oplib.h> -#include <asm/timer.h> -#include <asm/mostek.h> -#include <asm/system.h> -#include <asm/irq.h> -#include <asm/io.h> - -#include "irq.h" extern unsigned long lvl14_save[5]; static unsigned long *linux_lvl14 = NULL; @@ -56,31 +37,3 @@ void install_obp_ticker(void) linux_lvl14[2] = obp_lvl14[2]; linux_lvl14[3] = obp_lvl14[3]; } - -void claim_ticker14(irq_handler_t handler, - int irq_nr, unsigned int timeout ) -{ - int cpu = smp_processor_id(); - - /* first we copy the obp handler instructions - */ - __disable_irq(irq_nr); - if (!handler) - return; - - linux_lvl14 = (unsigned long *)lvl14_save[4]; - obp_lvl14[0] = linux_lvl14[0]; - obp_lvl14[1] = linux_lvl14[1]; - obp_lvl14[2] = linux_lvl14[2]; - obp_lvl14[3] = linux_lvl14[3]; - - if (!request_irq(irq_nr, - handler, - (IRQF_DISABLED | SA_STATIC_ALLOC), - "counter14", - NULL)) { - install_linux_ticker(); - load_profile_irq(cpu, timeout); - __enable_irq(irq_nr); - } -} diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index 0762f5db192..62c1d94cb43 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -23,22 +23,24 @@ #include <linux/mm.h> #include <linux/interrupt.h> #include <linux/time.h> +#include <linux/rtc.h> +#include <linux/rtc/m48t59.h> #include <linux/timex.h> #include <linux/init.h> #include <linux/pci.h> #include <linux/ioport.h> #include <linux/profile.h> +#include <linux/of.h> #include <linux/of_device.h> +#include <linux/platform_device.h> #include <asm/oplib.h> #include <asm/timer.h> -#include <asm/mostek.h> #include <asm/system.h> #include <asm/irq.h> #include <asm/io.h> #include <asm/idprom.h> #include <asm/machines.h> -#include <asm/sun4paddr.h> #include <asm/page.h> #include <asm/pcic.h> #include <asm/irq_regs.h> @@ -46,34 +48,9 @@ #include "irq.h" DEFINE_SPINLOCK(rtc_lock); -static enum sparc_clock_type sp_clock_typ; -DEFINE_SPINLOCK(mostek_lock); -void __iomem *mstk48t02_regs = NULL; -static struct mostek48t08 __iomem *mstk48t08_regs = NULL; static int set_rtc_mmss(unsigned long); static int sbus_do_settimeofday(struct timespec *tv); -#ifdef CONFIG_SUN4 -struct intersil *intersil_clock; -#define intersil_cmd(intersil_reg, intsil_cmd) intersil_reg->int_cmd_reg = \ - (intsil_cmd) - -#define intersil_intr(intersil_reg, intsil_cmd) intersil_reg->int_intr_reg = \ - (intsil_cmd) - -#define intersil_start(intersil_reg) intersil_cmd(intersil_reg, \ - ( INTERSIL_START | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\ - INTERSIL_INTR_ENABLE)) - -#define intersil_stop(intersil_reg) intersil_cmd(intersil_reg, \ - ( INTERSIL_STOP | INTERSIL_32K | INTERSIL_NORMAL | INTERSIL_24H |\ - INTERSIL_INTR_ENABLE)) - -#define intersil_read_intr(intersil_reg, towhere) towhere = \ - intersil_reg->int_intr_reg - -#endif - unsigned long profile_pc(struct pt_regs *regs) { extern char __copy_user_begin[], __copy_user_end[]; @@ -96,7 +73,6 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); __volatile__ unsigned int *master_l10_counter; -__volatile__ unsigned int *master_l10_limit; /* * timer_interrupt() needs to keep up the real-time clock, @@ -116,15 +92,7 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id) /* Protect counter clear so that do_gettimeoffset works */ write_seqlock(&xtime_lock); -#ifdef CONFIG_SUN4 - if((idprom->id_machtype == (SM_SUN4 | SM_4_260)) || - (idprom->id_machtype == (SM_SUN4 | SM_4_110))) { - int temp; - intersil_read_intr(intersil_clock, temp); - /* re-enable the irq */ - enable_pil_irq(10); - } -#endif + clear_clock_irq(); do_timer(1); @@ -147,157 +115,56 @@ static irqreturn_t timer_interrupt(int dummy, void *dev_id) return IRQ_HANDLED; } -/* Kick start a stopped clock (procedure from the Sun NVRAM/hostid FAQ). */ -static void __devinit kick_start_clock(void) +static unsigned char mostek_read_byte(struct device *dev, u32 ofs) { - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned char sec; - int i, count; - - prom_printf("CLOCK: Clock was stopped. Kick start "); - - spin_lock_irq(&mostek_lock); - - /* Turn on the kick start bit to start the oscillator. */ - regs->creg |= MSTK_CREG_WRITE; - regs->sec &= ~MSTK_STOP; - regs->hour |= MSTK_KICK_START; - regs->creg &= ~MSTK_CREG_WRITE; - - spin_unlock_irq(&mostek_lock); - - /* Delay to allow the clock oscillator to start. */ - sec = MSTK_REG_SEC(regs); - for (i = 0; i < 3; i++) { - while (sec == MSTK_REG_SEC(regs)) - for (count = 0; count < 100000; count++) - /* nothing */ ; - prom_printf("."); - sec = regs->sec; - } - prom_printf("\n"); - - spin_lock_irq(&mostek_lock); - - /* Turn off kick start and set a "valid" time and date. */ - regs->creg |= MSTK_CREG_WRITE; - regs->hour &= ~MSTK_KICK_START; - MSTK_SET_REG_SEC(regs,0); - MSTK_SET_REG_MIN(regs,0); - MSTK_SET_REG_HOUR(regs,0); - MSTK_SET_REG_DOW(regs,5); - MSTK_SET_REG_DOM(regs,1); - MSTK_SET_REG_MONTH(regs,8); - MSTK_SET_REG_YEAR(regs,1996 - MSTK_YEAR_ZERO); - regs->creg &= ~MSTK_CREG_WRITE; - - spin_unlock_irq(&mostek_lock); - - /* Ensure the kick start bit is off. If it isn't, turn it off. */ - while (regs->hour & MSTK_KICK_START) { - prom_printf("CLOCK: Kick start still on!\n"); - - spin_lock_irq(&mostek_lock); - regs->creg |= MSTK_CREG_WRITE; - regs->hour &= ~MSTK_KICK_START; - regs->creg &= ~MSTK_CREG_WRITE; - spin_unlock_irq(&mostek_lock); + struct platform_device *pdev = to_platform_device(dev); + struct m48t59_plat_data *pdata = pdev->dev.platform_data; + void __iomem *regs = pdata->ioaddr; + unsigned char val = readb(regs + ofs); + + /* the year 0 is 1968 */ + if (ofs == pdata->offset + M48T59_YEAR) { + val += 0x68; + if ((val & 0xf) > 9) + val += 6; } - - prom_printf("CLOCK: Kick start procedure successful.\n"); -} - -/* Return nonzero if the clock chip battery is low. */ -static inline int has_low_battery(void) -{ - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned char data1, data2; - - spin_lock_irq(&mostek_lock); - data1 = regs->eeprom[0]; /* Read some data. */ - regs->eeprom[0] = ~data1; /* Write back the complement. */ - data2 = regs->eeprom[0]; /* Read back the complement. */ - regs->eeprom[0] = data1; /* Restore the original value. */ - spin_unlock_irq(&mostek_lock); - - return (data1 == data2); /* Was the write blocked? */ + return val; } -static void __devinit mostek_set_system_time(void) +static void mostek_write_byte(struct device *dev, u32 ofs, u8 val) { - unsigned int year, mon, day, hour, min, sec; - struct mostek48t02 *mregs; - - mregs = (struct mostek48t02 *)mstk48t02_regs; - if(!mregs) { - prom_printf("Something wrong, clock regs not mapped yet.\n"); - prom_halt(); - } - spin_lock_irq(&mostek_lock); - mregs->creg |= MSTK_CREG_READ; - sec = MSTK_REG_SEC(mregs); - min = MSTK_REG_MIN(mregs); - hour = MSTK_REG_HOUR(mregs); - day = MSTK_REG_DOM(mregs); - mon = MSTK_REG_MONTH(mregs); - year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) ); - xtime.tv_sec = mktime(year, mon, day, hour, min, sec); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - mregs->creg &= ~MSTK_CREG_READ; - spin_unlock_irq(&mostek_lock); + struct platform_device *pdev = to_platform_device(dev); + struct m48t59_plat_data *pdata = pdev->dev.platform_data; + void __iomem *regs = pdata->ioaddr; + + if (ofs == pdata->offset + M48T59_YEAR) { + if (val < 0x68) + val += 0x32; + else + val -= 0x68; + if ((val & 0xf) > 9) + val += 6; + if ((val & 0xf0) > 0x9A) + val += 0x60; + } + writeb(val, regs + ofs); } -/* Probe for the real time clock chip on Sun4 */ -static inline void sun4_clock_probe(void) -{ -#ifdef CONFIG_SUN4 - int temp; - struct resource r; - - memset(&r, 0, sizeof(r)); - if( idprom->id_machtype == (SM_SUN4 | SM_4_330) ) { - sp_clock_typ = MSTK48T02; - r.start = sun4_clock_physaddr; - mstk48t02_regs = sbus_ioremap(&r, 0, - sizeof(struct mostek48t02), NULL); - mstk48t08_regs = NULL; /* To catch weirdness */ - intersil_clock = NULL; /* just in case */ - - /* Kick start the clock if it is completely stopped. */ - if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP) - kick_start_clock(); - } else if( idprom->id_machtype == (SM_SUN4 | SM_4_260)) { - /* intersil setup code */ - printk("Clock: INTERSIL at %8x ",sun4_clock_physaddr); - sp_clock_typ = INTERSIL; - r.start = sun4_clock_physaddr; - intersil_clock = (struct intersil *) - sbus_ioremap(&r, 0, sizeof(*intersil_clock), "intersil"); - mstk48t02_regs = 0; /* just be sure */ - mstk48t08_regs = NULL; /* ditto */ - /* initialise the clock */ - - intersil_intr(intersil_clock,INTERSIL_INT_100HZ); - - intersil_start(intersil_clock); - - intersil_read_intr(intersil_clock, temp); - while (!(temp & 0x80)) - intersil_read_intr(intersil_clock, temp); - - intersil_read_intr(intersil_clock, temp); - while (!(temp & 0x80)) - intersil_read_intr(intersil_clock, temp); - - intersil_stop(intersil_clock); +static struct m48t59_plat_data m48t59_data = { + .read_byte = mostek_read_byte, + .write_byte = mostek_write_byte, +}; - } -#endif -} +/* resource is set at runtime */ +static struct platform_device m48t59_rtc = { + .name = "rtc-m48t59", + .id = 0, + .num_resources = 1, + .dev = { + .platform_data = &m48t59_data, + }, +}; -#ifndef CONFIG_SUN4 static int __devinit clock_probe(struct of_device *op, const struct of_device_id *match) { struct device_node *dp = op->node; @@ -306,38 +173,26 @@ static int __devinit clock_probe(struct of_device *op, const struct of_device_id if (!model) return -ENODEV; + m48t59_rtc.resource = &op->resource[0]; if (!strcmp(model, "mk48t02")) { - sp_clock_typ = MSTK48T02; - /* Map the clock register io area read-only */ - mstk48t02_regs = of_ioremap(&op->resource[0], 0, - sizeof(struct mostek48t02), - "mk48t02"); - mstk48t08_regs = NULL; /* To catch weirdness */ + m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0, + 2048, "rtc-m48t59"); + m48t59_data.type = M48T59RTC_TYPE_M48T02; } else if (!strcmp(model, "mk48t08")) { - sp_clock_typ = MSTK48T08; - mstk48t08_regs = of_ioremap(&op->resource[0], 0, - sizeof(struct mostek48t08), - "mk48t08"); - - mstk48t02_regs = &mstk48t08_regs->regs; + m48t59_data.ioaddr = of_ioremap(&op->resource[0], 0, + 8192, "rtc-m48t59"); + m48t59_data.type = M48T59RTC_TYPE_M48T08; } else return -ENODEV; - /* Report a low battery voltage condition. */ - if (has_low_battery()) - printk(KERN_CRIT "NVRAM: Low battery voltage!\n"); - - /* Kick start the clock if it is completely stopped. */ - if (mostek_read(mstk48t02_regs + MOSTEK_SEC) & MSTK_STOP) - kick_start_clock(); - - mostek_set_system_time(); + if (platform_device_register(&m48t59_rtc) < 0) + printk(KERN_ERR "Registering RTC device failed\n"); return 0; } -static struct of_device_id clock_match[] = { +static struct of_device_id __initdata clock_match[] = { { .name = "eeprom", }, @@ -348,7 +203,7 @@ static struct of_platform_driver clock_driver = { .match_table = clock_match, .probe = clock_probe, .driver = { - .name = "clock", + .name = "rtc", }, }; @@ -364,7 +219,6 @@ static int __init clock_init(void) * need to see the clock registers. */ fs_initcall(clock_init); -#endif /* !CONFIG_SUN4 */ static void __init sbus_time_init(void) { @@ -372,51 +226,8 @@ static void __init sbus_time_init(void) BTFIXUPSET_CALL(bus_do_settimeofday, sbus_do_settimeofday, BTFIXUPCALL_NORM); btfixup(); - if (ARCH_SUN4) - sun4_clock_probe(); - sparc_init_timers(timer_interrupt); -#ifdef CONFIG_SUN4 - if(idprom->id_machtype == (SM_SUN4 | SM_4_330)) { - mostek_set_system_time(); - } else if(idprom->id_machtype == (SM_SUN4 | SM_4_260) ) { - /* initialise the intersil on sun4 */ - unsigned int year, mon, day, hour, min, sec; - int temp; - struct intersil *iregs; - - iregs=intersil_clock; - if(!iregs) { - prom_printf("Something wrong, clock regs not mapped yet.\n"); - prom_halt(); - } - - intersil_intr(intersil_clock,INTERSIL_INT_100HZ); - disable_pil_irq(10); - intersil_stop(iregs); - intersil_read_intr(intersil_clock, temp); - - temp = iregs->clk.int_csec; - - sec = iregs->clk.int_sec; - min = iregs->clk.int_min; - hour = iregs->clk.int_hour; - day = iregs->clk.int_day; - mon = iregs->clk.int_month; - year = MSTK_CVT_YEAR(iregs->clk.int_year); - - enable_pil_irq(10); - intersil_start(iregs); - - xtime.tv_sec = mktime(year, mon, day, hour, min, sec); - xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ); - set_normalized_timespec(&wall_to_monotonic, - -xtime.tv_sec, -xtime.tv_nsec); - printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec); - } -#endif - /* Now that OBP ticker has been silenced, it is safe to enable IRQ. */ local_irq_enable(); } @@ -522,80 +333,15 @@ static int sbus_do_settimeofday(struct timespec *tv) return 0; } -/* - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you won't notice until after reboot! - */ -static int set_rtc_mmss(unsigned long nowtime) +static int set_rtc_mmss(unsigned long secs) { - int real_seconds, real_minutes, mostek_minutes; - struct mostek48t02 *regs = (struct mostek48t02 *)mstk48t02_regs; - unsigned long flags; -#ifdef CONFIG_SUN4 - struct intersil *iregs = intersil_clock; - int temp; -#endif + struct rtc_device *rtc = rtc_class_open("rtc0"); + int err = -1; - /* Not having a register set can lead to trouble. */ - if (!regs) { -#ifdef CONFIG_SUN4 - if(!iregs) - return -1; - else { - temp = iregs->clk.int_csec; - - mostek_minutes = iregs->clk.int_min; - - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - mostek_minutes) < 30) { - intersil_stop(iregs); - iregs->clk.int_sec=real_seconds; - iregs->clk.int_min=real_minutes; - intersil_start(iregs); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - mostek_minutes, real_minutes); - return -1; - } - - return 0; - } -#endif + if (rtc) { + err = rtc_set_mmss(rtc, secs); + rtc_class_close(rtc); } - spin_lock_irqsave(&mostek_lock, flags); - /* Read the current RTC minutes. */ - regs->creg |= MSTK_CREG_READ; - mostek_minutes = MSTK_REG_MIN(regs); - regs->creg &= ~MSTK_CREG_READ; - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - mostek_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - if (abs(real_minutes - mostek_minutes) < 30) { - regs->creg |= MSTK_CREG_WRITE; - MSTK_SET_REG_SEC(regs,real_seconds); - MSTK_SET_REG_MIN(regs,real_minutes); - regs->creg &= ~MSTK_CREG_WRITE; - spin_unlock_irqrestore(&mostek_lock, flags); - return 0; - } else { - spin_unlock_irqrestore(&mostek_lock, flags); - return -1; - } + return err; } diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c index 5d45d5fd8c9..2b7d5065903 100644 --- a/arch/sparc/kernel/traps.c +++ b/arch/sparc/kernel/traps.c @@ -43,23 +43,6 @@ void syscall_trace_exit(struct pt_regs *regs) { } -void sun4m_nmi(struct pt_regs *regs) -{ - unsigned long afsr, afar; - - printk("Aieee: sun4m NMI received!\n"); - /* XXX HyperSparc hack XXX */ - __asm__ __volatile__("mov 0x500, %%g1\n\t" - "lda [%%g1] 0x4, %0\n\t" - "mov 0x600, %%g1\n\t" - "lda [%%g1] 0x4, %1\n\t" : - "=r" (afsr), "=r" (afar)); - printk("afsr=%08lx afar=%08lx\n", afsr, afar); - printk("you lose buddy boy...\n"); - show_regs(regs); - prom_halt(); -} - void sun4d_nmi(struct pt_regs *regs) { printk("Aieee: sun4d NMI received!\n"); diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile index 109c8b22cb3..ea88955d97f 100644 --- a/arch/sparc/mm/Makefile +++ b/arch/sparc/mm/Makefile @@ -3,13 +3,8 @@ EXTRA_AFLAGS := -ansi -obj-y := fault.o init.o loadmmu.o generic.o extable.o btfixup.o - -ifeq ($(CONFIG_SUN4),y) -obj-y += nosrmmu.o -else -obj-y += srmmu.o iommu.o io-unit.o hypersparc.o viking.o tsunami.o swift.o -endif +obj-y := fault.o init.o loadmmu.o generic.o extable.o btfixup.o \ + srmmu.o iommu.o io-unit.o hypersparc.o viking.o tsunami.o swift.o ifdef CONFIG_HIGHMEM obj-y += highmem.o diff --git a/arch/sparc/mm/btfixup.c b/arch/sparc/mm/btfixup.c index a312d127d47..5175ac2f482 100644 --- a/arch/sparc/mm/btfixup.c +++ b/arch/sparc/mm/btfixup.c @@ -20,11 +20,7 @@ extern char *srmmu_name; static char version[] __initdata = "Boot time fixup v1.6. 4/Mar/98 Jakub Jelinek (jj@ultra.linux.cz). Patching kernel for "; -#ifdef CONFIG_SUN4 -static char str_sun4c[] __initdata = "sun4\n"; -#else static char str_sun4c[] __initdata = "sun4c\n"; -#endif static char str_srmmu[] __initdata = "srmmu[%s]/"; static char str_iommu[] __initdata = "iommu\n"; static char str_iounit[] __initdata = "io-unit\n"; @@ -86,7 +82,7 @@ void __init btfixup(void) if (!visited) { visited++; printk(version); - if (ARCH_SUN4C_SUN4) + if (ARCH_SUN4C) printk(str_sun4c); else { printk(str_srmmu, srmmu_name); diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c index 3604c2e8670..a507e117466 100644 --- a/arch/sparc/mm/fault.c +++ b/arch/sparc/mm/fault.c @@ -191,7 +191,7 @@ asmlinkage void do_sparc_fault(struct pt_regs *regs, int text_fault, int write, * only copy the information from the master page table, * nothing more. */ - if (!ARCH_SUN4C_SUN4 && address >= TASK_SIZE) + if (!ARCH_SUN4C && address >= TASK_SIZE) goto vmalloc_fault; info.si_code = SEGV_MAPERR; diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c index e103f1bb377..677c1e187a2 100644 --- a/arch/sparc/mm/init.c +++ b/arch/sparc/mm/init.c @@ -23,6 +23,7 @@ #include <linux/highmem.h> #include <linux/bootmem.h> #include <linux/pagemap.h> +#include <linux/poison.h> #include <asm/system.h> #include <asm/vac-ops.h> @@ -480,6 +481,7 @@ void free_initmem (void) for (; addr < (unsigned long)(&__init_end); addr += PAGE_SIZE) { struct page *p; + memset((void *)addr, POISON_FREE_INITMEM, PAGE_SIZE); p = virt_to_page(addr); ClearPageReserved(p); @@ -488,20 +490,26 @@ void free_initmem (void) totalram_pages++; num_physpages++; } - printk (KERN_INFO "Freeing unused kernel memory: %dk freed\n", (&__init_end - &__init_begin) >> 10); + printk(KERN_INFO "Freeing unused kernel memory: %dk freed\n", + (&__init_end - &__init_begin) >> 10); } #ifdef CONFIG_BLK_DEV_INITRD void free_initrd_mem(unsigned long start, unsigned long end) { if (start < end) - printk (KERN_INFO "Freeing initrd memory: %ldk freed\n", (end - start) >> 10); + printk(KERN_INFO "Freeing initrd memory: %ldk freed\n", + (end - start) >> 10); for (; start < end; start += PAGE_SIZE) { - struct page *p = virt_to_page(start); + struct page *p; + + memset((void *)start, POISON_FREE_INITMEM, PAGE_SIZE); + p = virt_to_page(start); ClearPageReserved(p); init_page_count(p); __free_page(p); + totalram_pages++; num_physpages++; } } diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c index f167835db3d..daadf5f8805 100644 --- a/arch/sparc/mm/io-unit.c +++ b/arch/sparc/mm/io-unit.c @@ -12,10 +12,11 @@ #include <linux/highmem.h> /* pte_offset_map => kmap_atomic */ #include <linux/bitops.h> #include <linux/scatterlist.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/sbus.h> #include <asm/io.h> #include <asm/io-unit.h> #include <asm/mxcc.h> @@ -34,13 +35,10 @@ #define IOPERM (IOUPTE_CACHE | IOUPTE_WRITE | IOUPTE_VALID) #define MKIOPTE(phys) __iopte((((phys)>>4) & IOUPTE_PAGE) | IOPERM) -void __init -iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus) +static void __init iounit_iommu_init(struct of_device *op) { - iopte_t *xpt, *xptend; struct iounit_struct *iounit; - struct linux_prom_registers iommu_promregs[PROMREG_MAX]; - struct resource r; + iopte_t *xpt, *xptend; iounit = kzalloc(sizeof(struct iounit_struct), GFP_ATOMIC); if (!iounit) { @@ -55,18 +53,13 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus) iounit->rotor[1] = IOUNIT_BMAP2_START; iounit->rotor[2] = IOUNIT_BMAPM_START; - xpt = NULL; - if(prom_getproperty(sbi_node, "reg", (void *) iommu_promregs, - sizeof(iommu_promregs)) != -1) { - prom_apply_generic_ranges(io_node, 0, iommu_promregs, 3); - memset(&r, 0, sizeof(r)); - r.flags = iommu_promregs[2].which_io; - r.start = iommu_promregs[2].phys_addr; - xpt = (iopte_t *) sbus_ioremap(&r, 0, PAGE_SIZE * 16, "XPT"); + xpt = of_ioremap(&op->resource[2], 0, PAGE_SIZE * 16, "XPT"); + if (!xpt) { + prom_printf("SUN4D: Cannot map External Page Table."); + prom_halt(); } - if(!xpt) panic("Cannot map External Page Table."); - sbus->ofdev.dev.archdata.iommu = iounit; + op->dev.archdata.iommu = iounit; iounit->page_table = xpt; spin_lock_init(&iounit->lock); @@ -75,6 +68,25 @@ iounit_init(int sbi_node, int io_node, struct sbus_bus *sbus) iopte_val(*xpt++) = 0; } +static int __init iounit_init(void) +{ + extern void sun4d_init_sbi_irq(void); + struct device_node *dp; + + for_each_node_by_name(dp, "sbi") { + struct of_device *op = of_find_device_by_node(dp); + + iounit_iommu_init(op); + of_propagate_archdata(op); + } + + sun4d_init_sbi_irq(); + + return 0; +} + +subsys_initcall(iounit_init); + /* One has to hold iounit->lock to call this */ static unsigned long iounit_get_area(struct iounit_struct *iounit, unsigned long vaddr, int size) { @@ -124,10 +136,10 @@ nexti: scan = find_next_zero_bit(iounit->bmap, limit, scan); return vaddr; } -static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus *sbus) +static __u32 iounit_get_scsi_one(struct device *dev, char *vaddr, unsigned long len) { + struct iounit_struct *iounit = dev->archdata.iommu; unsigned long ret, flags; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); ret = iounit_get_area(iounit, (unsigned long)vaddr, len); @@ -135,10 +147,10 @@ static __u32 iounit_get_scsi_one(char *vaddr, unsigned long len, struct sbus_bus return ret; } -static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iounit_get_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz) { + struct iounit_struct *iounit = dev->archdata.iommu; unsigned long flags; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; /* FIXME: Cache some resolved pages - often several sg entries are to the same page */ spin_lock_irqsave(&iounit->lock, flags); @@ -151,10 +163,10 @@ static void iounit_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus spin_unlock_irqrestore(&iounit->lock, flags); } -static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus) +static void iounit_release_scsi_one(struct device *dev, __u32 vaddr, unsigned long len) { + struct iounit_struct *iounit = dev->archdata.iommu; unsigned long flags; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); len = ((vaddr & ~PAGE_MASK) + len + (PAGE_SIZE-1)) >> PAGE_SHIFT; @@ -165,11 +177,11 @@ static void iounit_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_ spin_unlock_irqrestore(&iounit->lock, flags); } -static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iounit_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz) { + struct iounit_struct *iounit = dev->archdata.iommu; unsigned long flags; unsigned long vaddr, len; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; spin_lock_irqsave(&iounit->lock, flags); while (sz != 0) { @@ -185,12 +197,12 @@ static void iounit_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_ } #ifdef CONFIG_SBUS -static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, int len) +static int iounit_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va, __u32 addr, int len) { + struct iounit_struct *iounit = dev->archdata.iommu; unsigned long page, end; pgprot_t dvma_prot; iopte_t *iopte; - struct sbus_bus *sbus; *pba = addr; @@ -212,12 +224,8 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT); - for_each_sbus(sbus) { - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; - - iopte = (iopte_t *)(iounit->page_table + i); - *iopte = MKIOPTE(__pa(page)); - } + iopte = (iopte_t *)(iounit->page_table + i); + *iopte = MKIOPTE(__pa(page)); } addr += PAGE_SIZE; va += PAGE_SIZE; @@ -228,23 +236,10 @@ static int iounit_map_dma_area(dma_addr_t *pba, unsigned long va, __u32 addr, in return 0; } -static void iounit_unmap_dma_area(unsigned long addr, int len) +static void iounit_unmap_dma_area(struct device *dev, unsigned long addr, int len) { /* XXX Somebody please fill this in */ } - -/* XXX We do not pass sbus device here, bad. */ -static struct page *iounit_translate_dvma(unsigned long addr) -{ - struct sbus_bus *sbus = sbus_root; /* They are all the same */ - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; - int i; - iopte_t *iopte; - - i = ((addr - IOUNIT_DMA_BASE) >> PAGE_SHIFT); - iopte = (iopte_t *)(iounit->page_table + i); - return pfn_to_page(iopte_val(*iopte) >> (PAGE_SHIFT-4)); /* XXX sun4d guru, help */ -} #endif static char *iounit_lockarea(char *vaddr, unsigned long len) @@ -271,54 +266,5 @@ void __init ld_mmu_iounit(void) #ifdef CONFIG_SBUS BTFIXUPSET_CALL(mmu_map_dma_area, iounit_map_dma_area, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(mmu_unmap_dma_area, iounit_unmap_dma_area, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(mmu_translate_dvma, iounit_translate_dvma, BTFIXUPCALL_NORM); #endif } - -__u32 iounit_map_dma_init(struct sbus_bus *sbus, int size) -{ - int i, j, k, npages; - unsigned long rotor, scan, limit; - unsigned long flags; - __u32 ret; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; - - npages = (size + (PAGE_SIZE-1)) >> PAGE_SHIFT; - i = 0x0213; - spin_lock_irqsave(&iounit->lock, flags); -next: j = (i & 15); - rotor = iounit->rotor[j - 1]; - limit = iounit->limit[j]; - scan = rotor; -nexti: scan = find_next_zero_bit(iounit->bmap, limit, scan); - if (scan + npages > limit) { - if (limit != rotor) { - limit = rotor; - scan = iounit->limit[j - 1]; - goto nexti; - } - i >>= 4; - if (!(i & 15)) - panic("iounit_map_dma_init: Couldn't find free iopte slots for %d bytes\n", size); - goto next; - } - for (k = 1, scan++; k < npages; k++) - if (test_bit(scan++, iounit->bmap)) - goto nexti; - iounit->rotor[j - 1] = (scan < limit) ? scan : iounit->limit[j - 1]; - scan -= npages; - ret = IOUNIT_DMA_BASE + (scan << PAGE_SHIFT); - for (k = 0; k < npages; k++, scan++) - set_bit(scan, iounit->bmap); - spin_unlock_irqrestore(&iounit->lock, flags); - return ret; -} - -__u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus) -{ - int scan = (vaddr - IOUNIT_DMA_BASE) >> PAGE_SHIFT; - struct iounit_struct *iounit = sbus->ofdev.dev.archdata.iommu; - - iounit->page_table[scan] = MKIOPTE(__pa(((unsigned long)addr) & PAGE_MASK)); - return vaddr + (((unsigned long)addr) & ~PAGE_MASK); -} diff --git a/arch/sparc/mm/iommu.c b/arch/sparc/mm/iommu.c index 4b934270f05..e7a499e3aa3 100644 --- a/arch/sparc/mm/iommu.c +++ b/arch/sparc/mm/iommu.c @@ -13,10 +13,11 @@ #include <linux/slab.h> #include <linux/highmem.h> /* pte_offset_map => kmap_atomic */ #include <linux/scatterlist.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <asm/pgalloc.h> #include <asm/pgtable.h> -#include <asm/sbus.h> #include <asm/io.h> #include <asm/mxcc.h> #include <asm/mbus.h> @@ -55,30 +56,21 @@ static pgprot_t dvma_prot; /* Consistent mapping pte flags */ #define IOPERM (IOPTE_CACHE | IOPTE_WRITE | IOPTE_VALID) #define MKIOPTE(pfn, perm) (((((pfn)<<8) & IOPTE_PAGE) | (perm)) & ~IOPTE_WAZ) -void __init -iommu_init(int iommund, struct sbus_bus *sbus) +static void __init sbus_iommu_init(struct of_device *op) { - unsigned int impl, vers; - unsigned long tmp; struct iommu_struct *iommu; - struct linux_prom_registers iommu_promregs[PROMREG_MAX]; - struct resource r; + unsigned int impl, vers; unsigned long *bitmap; + unsigned long tmp; iommu = kmalloc(sizeof(struct iommu_struct), GFP_ATOMIC); if (!iommu) { prom_printf("Unable to allocate iommu structure\n"); prom_halt(); } - iommu->regs = NULL; - if (prom_getproperty(iommund, "reg", (void *) iommu_promregs, - sizeof(iommu_promregs)) != -1) { - memset(&r, 0, sizeof(r)); - r.flags = iommu_promregs[0].which_io; - r.start = iommu_promregs[0].phys_addr; - iommu->regs = (struct iommu_regs *) - sbus_ioremap(&r, 0, PAGE_SIZE * 3, "iommu_regs"); - } + + iommu->regs = of_ioremap(&op->resource[0], 0, PAGE_SIZE * 3, + "iommu_regs"); if (!iommu->regs) { prom_printf("Cannot map IOMMU registers\n"); prom_halt(); @@ -128,13 +120,29 @@ iommu_init(int iommund, struct sbus_bus *sbus) else iommu->usemap.num_colors = 1; - printk("IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n", - impl, vers, iommu->page_table, - (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES); + printk(KERN_INFO "IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n", + impl, vers, iommu->page_table, + (int)(IOMMU_NPTES*sizeof(iopte_t)), (int)IOMMU_NPTES); + + op->dev.archdata.iommu = iommu; +} + +static int __init iommu_init(void) +{ + struct device_node *dp; + + for_each_node_by_name(dp, "iommu") { + struct of_device *op = of_find_device_by_node(dp); + + sbus_iommu_init(op); + of_propagate_archdata(op); + } - sbus->ofdev.dev.archdata.iommu = iommu; + return 0; } +subsys_initcall(iommu_init); + /* This begs to be btfixup-ed by srmmu. */ /* Flush the iotlb entries to ram. */ /* This could be better if we didn't have to flush whole pages. */ @@ -164,9 +172,9 @@ static void iommu_flush_iotlb(iopte_t *iopte, unsigned int niopte) } } -static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus) +static u32 iommu_get_one(struct device *dev, struct page *page, int npages) { - struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu; + struct iommu_struct *iommu = dev->archdata.iommu; int ioptex; iopte_t *iopte, *iopte0; unsigned int busa, busa0; @@ -194,8 +202,7 @@ static u32 iommu_get_one(struct page *page, int npages, struct sbus_bus *sbus) return busa0; } -static u32 iommu_get_scsi_one(char *vaddr, unsigned int len, - struct sbus_bus *sbus) +static u32 iommu_get_scsi_one(struct device *dev, char *vaddr, unsigned int len) { unsigned long off; int npages; @@ -205,22 +212,22 @@ static u32 iommu_get_scsi_one(char *vaddr, unsigned int len, off = (unsigned long)vaddr & ~PAGE_MASK; npages = (off + len + PAGE_SIZE-1) >> PAGE_SHIFT; page = virt_to_page((unsigned long)vaddr & PAGE_MASK); - busa = iommu_get_one(page, npages, sbus); + busa = iommu_get_one(dev, page, npages); return busa + off; } -static __u32 iommu_get_scsi_one_noflush(char *vaddr, unsigned long len, struct sbus_bus *sbus) +static __u32 iommu_get_scsi_one_noflush(struct device *dev, char *vaddr, unsigned long len) { - return iommu_get_scsi_one(vaddr, len, sbus); + return iommu_get_scsi_one(dev, vaddr, len); } -static __u32 iommu_get_scsi_one_gflush(char *vaddr, unsigned long len, struct sbus_bus *sbus) +static __u32 iommu_get_scsi_one_gflush(struct device *dev, char *vaddr, unsigned long len) { flush_page_for_dma(0); - return iommu_get_scsi_one(vaddr, len, sbus); + return iommu_get_scsi_one(dev, vaddr, len); } -static __u32 iommu_get_scsi_one_pflush(char *vaddr, unsigned long len, struct sbus_bus *sbus) +static __u32 iommu_get_scsi_one_pflush(struct device *dev, char *vaddr, unsigned long len) { unsigned long page = ((unsigned long) vaddr) & PAGE_MASK; @@ -228,23 +235,23 @@ static __u32 iommu_get_scsi_one_pflush(char *vaddr, unsigned long len, struct sb flush_page_for_dma(page); page += PAGE_SIZE; } - return iommu_get_scsi_one(vaddr, len, sbus); + return iommu_get_scsi_one(dev, vaddr, len); } -static void iommu_get_scsi_sgl_noflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iommu_get_scsi_sgl_noflush(struct device *dev, struct scatterlist *sg, int sz) { int n; while (sz != 0) { --sz; n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT; - sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset; + sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset; sg->dvma_length = (__u32) sg->length; sg = sg_next(sg); } } -static void iommu_get_scsi_sgl_gflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iommu_get_scsi_sgl_gflush(struct device *dev, struct scatterlist *sg, int sz) { int n; @@ -252,13 +259,13 @@ static void iommu_get_scsi_sgl_gflush(struct scatterlist *sg, int sz, struct sbu while (sz != 0) { --sz; n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT; - sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset; + sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset; sg->dvma_length = (__u32) sg->length; sg = sg_next(sg); } } -static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iommu_get_scsi_sgl_pflush(struct device *dev, struct scatterlist *sg, int sz) { unsigned long page, oldpage = 0; int n, i; @@ -283,15 +290,15 @@ static void iommu_get_scsi_sgl_pflush(struct scatterlist *sg, int sz, struct sbu } } - sg->dvma_address = iommu_get_one(sg_page(sg), n, sbus) + sg->offset; + sg->dvma_address = iommu_get_one(dev, sg_page(sg), n) + sg->offset; sg->dvma_length = (__u32) sg->length; sg = sg_next(sg); } } -static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus) +static void iommu_release_one(struct device *dev, u32 busa, int npages) { - struct iommu_struct *iommu = sbus->ofdev.dev.archdata.iommu; + struct iommu_struct *iommu = dev->archdata.iommu; int ioptex; int i; @@ -305,17 +312,17 @@ static void iommu_release_one(u32 busa, int npages, struct sbus_bus *sbus) bit_map_clear(&iommu->usemap, ioptex, npages); } -static void iommu_release_scsi_one(__u32 vaddr, unsigned long len, struct sbus_bus *sbus) +static void iommu_release_scsi_one(struct device *dev, __u32 vaddr, unsigned long len) { unsigned long off; int npages; off = vaddr & ~PAGE_MASK; npages = (off + len + PAGE_SIZE-1) >> PAGE_SHIFT; - iommu_release_one(vaddr & PAGE_MASK, npages, sbus); + iommu_release_one(dev, vaddr & PAGE_MASK, npages); } -static void iommu_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void iommu_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz) { int n; @@ -323,18 +330,18 @@ static void iommu_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_b --sz; n = (sg->length + sg->offset + PAGE_SIZE-1) >> PAGE_SHIFT; - iommu_release_one(sg->dvma_address & PAGE_MASK, n, sbus); + iommu_release_one(dev, sg->dvma_address & PAGE_MASK, n); sg->dvma_address = 0x21212121; sg = sg_next(sg); } } #ifdef CONFIG_SBUS -static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va, - unsigned long addr, int len) +static int iommu_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va, + unsigned long addr, int len) { + struct iommu_struct *iommu = dev->archdata.iommu; unsigned long page, end; - struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; iopte_t *iopte = iommu->page_table; iopte_t *first; int ioptex; @@ -397,9 +404,9 @@ static int iommu_map_dma_area(dma_addr_t *pba, unsigned long va, return 0; } -static void iommu_unmap_dma_area(unsigned long busa, int len) +static void iommu_unmap_dma_area(struct device *dev, unsigned long busa, int len) { - struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; + struct iommu_struct *iommu = dev->archdata.iommu; iopte_t *iopte = iommu->page_table; unsigned long end; int ioptex = (busa - iommu->start) >> PAGE_SHIFT; @@ -417,15 +424,6 @@ static void iommu_unmap_dma_area(unsigned long busa, int len) iommu_invalidate(iommu->regs); bit_map_clear(&iommu->usemap, ioptex, len >> PAGE_SHIFT); } - -static struct page *iommu_translate_dvma(unsigned long busa) -{ - struct iommu_struct *iommu = sbus_root->ofdev.dev.archdata.iommu; - iopte_t *iopte = iommu->page_table; - - iopte += ((busa - iommu->start) >> PAGE_SHIFT); - return pfn_to_page((iopte_val(*iopte) & IOPTE_PAGE) >> (PAGE_SHIFT-4)); -} #endif static char *iommu_lockarea(char *vaddr, unsigned long len) @@ -461,7 +459,6 @@ void __init ld_mmu_iommu(void) #ifdef CONFIG_SBUS BTFIXUPSET_CALL(mmu_map_dma_area, iommu_map_dma_area, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(mmu_unmap_dma_area, iommu_unmap_dma_area, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(mmu_translate_dvma, iommu_translate_dvma, BTFIXUPCALL_NORM); #endif if (viking_mxcc_present || srmmu_modtype == HyperSparc) { diff --git a/arch/sparc/mm/nosrmmu.c b/arch/sparc/mm/nosrmmu.c deleted file mode 100644 index 3701f70fc30..00000000000 --- a/arch/sparc/mm/nosrmmu.c +++ /dev/null @@ -1,59 +0,0 @@ -/* - * nosrmmu.c: This file is a bunch of dummies for sun4 compiles, - * so that it does not need srmmu and avoid ifdefs. - * - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - */ - -#include <linux/kernel.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <asm/mbus.h> -#include <asm/sbus.h> - -static char shouldnothappen[] __initdata = "SUN4 kernel can only run on SUN4\n"; - -enum mbus_module srmmu_modtype; -void *srmmu_nocache_pool; - -int vac_cache_size = 0; - -static void __init should_not_happen(void) -{ - prom_printf(shouldnothappen); - prom_halt(); -} - -void __init srmmu_frob_mem_map(unsigned long start_mem) -{ - should_not_happen(); -} - -unsigned long __init srmmu_paging_init(unsigned long start_mem, unsigned long end_mem) -{ - should_not_happen(); - return 0; -} - -void __init ld_mmu_srmmu(void) -{ - should_not_happen(); -} - -void srmmu_mapioaddr(unsigned long physaddr, unsigned long virt_addr, int bus_type, int rdonly) -{ -} - -void srmmu_unmapioaddr(unsigned long virt_addr) -{ -} - -__u32 iounit_map_dma_init(struct sbus_bus *sbus, int size) -{ - return 0; -} - -__u32 iounit_map_dma_page(__u32 vaddr, void *addr, struct sbus_bus *sbus) -{ - return 0; -} diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index ee30462598f..6a5d7cabc04 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -31,7 +31,6 @@ #include <asm/mbus.h> #include <asm/cache.h> #include <asm/oplib.h> -#include <asm/sbus.h> #include <asm/asi.h> #include <asm/msi.h> #include <asm/mmu_context.h> diff --git a/arch/sparc/mm/sun4c.c b/arch/sparc/mm/sun4c.c index d1782f6368b..fe65aeeb394 100644 --- a/arch/sparc/mm/sun4c.c +++ b/arch/sparc/mm/sun4c.c @@ -31,7 +31,6 @@ #include <asm/oplib.h> #include <asm/openprom.h> #include <asm/mmu_context.h> -#include <asm/sun4paddr.h> #include <asm/highmem.h> #include <asm/btfixup.h> #include <asm/cacheflush.h> @@ -52,15 +51,11 @@ extern int num_segmaps, num_contexts; extern unsigned long page_kernel; -#ifdef CONFIG_SUN4 -#define SUN4C_VAC_SIZE sun4c_vacinfo.num_bytes -#else /* That's it, we prom_halt() on sun4c if the cache size is something other than 65536. * So let's save some cycles and just use that everywhere except for that bootup * sanity check. */ #define SUN4C_VAC_SIZE 65536 -#endif #define SUN4C_KERNEL_BUCKETS 32 @@ -285,75 +280,32 @@ void __init sun4c_probe_vac(void) { sun4c_disable_vac(); - if (ARCH_SUN4) { - switch (idprom->id_machtype) { - - case (SM_SUN4|SM_4_110): - sun4c_vacinfo.type = VAC_NONE; - sun4c_vacinfo.num_bytes = 0; - sun4c_vacinfo.linesize = 0; - sun4c_vacinfo.do_hwflushes = 0; - prom_printf("No VAC. Get some bucks and buy a real computer."); - prom_halt(); - break; - - case (SM_SUN4|SM_4_260): - sun4c_vacinfo.type = VAC_WRITE_BACK; - sun4c_vacinfo.num_bytes = 128 * 1024; - sun4c_vacinfo.linesize = 16; - sun4c_vacinfo.do_hwflushes = 0; - break; - - case (SM_SUN4|SM_4_330): - sun4c_vacinfo.type = VAC_WRITE_THROUGH; - sun4c_vacinfo.num_bytes = 128 * 1024; - sun4c_vacinfo.linesize = 16; - sun4c_vacinfo.do_hwflushes = 0; - break; - - case (SM_SUN4|SM_4_470): - sun4c_vacinfo.type = VAC_WRITE_BACK; - sun4c_vacinfo.num_bytes = 128 * 1024; - sun4c_vacinfo.linesize = 32; - sun4c_vacinfo.do_hwflushes = 0; - break; - - default: - prom_printf("Cannot initialize VAC - weird sun4 model idprom->id_machtype = %d", idprom->id_machtype); - prom_halt(); - }; + if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) || + (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) { + /* PROM on SS1 lacks this info, to be super safe we + * hard code it here since this arch is cast in stone. + */ + sun4c_vacinfo.num_bytes = 65536; + sun4c_vacinfo.linesize = 16; } else { - sun4c_vacinfo.type = VAC_WRITE_THROUGH; + sun4c_vacinfo.num_bytes = + prom_getintdefault(prom_root_node, "vac-size", 65536); + sun4c_vacinfo.linesize = + prom_getintdefault(prom_root_node, "vac-linesize", 16); + } + sun4c_vacinfo.do_hwflushes = + prom_getintdefault(prom_root_node, "vac-hwflush", 0); - if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) || - (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) { - /* PROM on SS1 lacks this info, to be super safe we - * hard code it here since this arch is cast in stone. - */ - sun4c_vacinfo.num_bytes = 65536; - sun4c_vacinfo.linesize = 16; - } else { - sun4c_vacinfo.num_bytes = - prom_getintdefault(prom_root_node, "vac-size", 65536); - sun4c_vacinfo.linesize = - prom_getintdefault(prom_root_node, "vac-linesize", 16); - } + if (sun4c_vacinfo.do_hwflushes == 0) sun4c_vacinfo.do_hwflushes = - prom_getintdefault(prom_root_node, "vac-hwflush", 0); - - if (sun4c_vacinfo.do_hwflushes == 0) - sun4c_vacinfo.do_hwflushes = - prom_getintdefault(prom_root_node, "vac_hwflush", 0); + prom_getintdefault(prom_root_node, "vac_hwflush", 0); - if (sun4c_vacinfo.num_bytes != 65536) { - prom_printf("WEIRD Sun4C VAC cache size, " - "tell sparclinux@vger.kernel.org"); - prom_halt(); - } + if (sun4c_vacinfo.num_bytes != 65536) { + prom_printf("WEIRD Sun4C VAC cache size, " + "tell sparclinux@vger.kernel.org"); + prom_halt(); } - sun4c_vacinfo.num_lines = - (sun4c_vacinfo.num_bytes / sun4c_vacinfo.linesize); switch (sun4c_vacinfo.linesize) { case 16: sun4c_vacinfo.log2lsize = 4; @@ -447,49 +399,18 @@ static void __init patch_kernel_fault_handler(void) static void __init sun4c_probe_mmu(void) { - if (ARCH_SUN4) { - switch (idprom->id_machtype) { - case (SM_SUN4|SM_4_110): - prom_printf("No support for 4100 yet\n"); - prom_halt(); - num_segmaps = 256; - num_contexts = 8; - break; - - case (SM_SUN4|SM_4_260): - /* should be 512 segmaps. when it get fixed */ - num_segmaps = 256; - num_contexts = 16; - break; - - case (SM_SUN4|SM_4_330): - num_segmaps = 256; - num_contexts = 16; - break; - - case (SM_SUN4|SM_4_470): - /* should be 1024 segmaps. when it get fixed */ - num_segmaps = 256; - num_contexts = 64; - break; - default: - prom_printf("Invalid SUN4 model\n"); - prom_halt(); - }; + if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) || + (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) { + /* Hardcode these just to be safe, PROM on SS1 does + * not have this info available in the root node. + */ + num_segmaps = 128; + num_contexts = 8; } else { - if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS1)) || - (idprom->id_machtype == (SM_SUN4C | SM_4C_SS1PLUS))) { - /* Hardcode these just to be safe, PROM on SS1 does - * not have this info available in the root node. - */ - num_segmaps = 128; - num_contexts = 8; - } else { - num_segmaps = - prom_getintdefault(prom_root_node, "mmu-npmg", 128); - num_contexts = - prom_getintdefault(prom_root_node, "mmu-nctx", 0x8); - } + num_segmaps = + prom_getintdefault(prom_root_node, "mmu-npmg", 128); + num_contexts = + prom_getintdefault(prom_root_node, "mmu-nctx", 0x8); } patch_kernel_fault_handler(); } @@ -501,18 +422,14 @@ void __init sun4c_probe_memerr_reg(void) int node; struct linux_prom_registers regs[1]; - if (ARCH_SUN4) { - sun4c_memerr_reg = ioremap(sun4_memreg_physaddr, PAGE_SIZE); - } else { - node = prom_getchild(prom_root_node); - node = prom_searchsiblings(prom_root_node, "memory-error"); - if (!node) - return; - if (prom_getproperty(node, "reg", (char *)regs, sizeof(regs)) <= 0) - return; - /* hmm I think regs[0].which_io is zero here anyways */ - sun4c_memerr_reg = ioremap(regs[0].phys_addr, regs[0].reg_size); - } + node = prom_getchild(prom_root_node); + node = prom_searchsiblings(prom_root_node, "memory-error"); + if (!node) + return; + if (prom_getproperty(node, "reg", (char *)regs, sizeof(regs)) <= 0) + return; + /* hmm I think regs[0].which_io is zero here anyways */ + sun4c_memerr_reg = ioremap(regs[0].phys_addr, regs[0].reg_size); } static inline void sun4c_init_ss2_cache_bug(void) @@ -521,7 +438,6 @@ static inline void sun4c_init_ss2_cache_bug(void) if ((idprom->id_machtype == (SM_SUN4C | SM_4C_SS2)) || (idprom->id_machtype == (SM_SUN4C | SM_4C_IPX)) || - (idprom->id_machtype == (SM_SUN4 | SM_4_330)) || (idprom->id_machtype == (SM_SUN4C | SM_4C_ELC))) { /* Whee.. */ printk("SS2 cache bug detected, uncaching trap table page\n"); @@ -532,8 +448,8 @@ static inline void sun4c_init_ss2_cache_bug(void) } /* Addr is always aligned on a page boundary for us already. */ -static int sun4c_map_dma_area(dma_addr_t *pba, unsigned long va, - unsigned long addr, int len) +static int sun4c_map_dma_area(struct device *dev, dma_addr_t *pba, unsigned long va, + unsigned long addr, int len) { unsigned long page, end; @@ -555,14 +471,7 @@ static int sun4c_map_dma_area(dma_addr_t *pba, unsigned long va, return 0; } -static struct page *sun4c_translate_dvma(unsigned long busa) -{ - /* Fortunately for us, bus_addr == uncached_virt in sun4c. */ - unsigned long pte = sun4c_get_pte(busa); - return pfn_to_page(pte & SUN4C_PFN_MASK); -} - -static void sun4c_unmap_dma_area(unsigned long busa, int len) +static void sun4c_unmap_dma_area(struct device *dev, unsigned long busa, int len) { /* Fortunately for us, bus_addr == uncached_virt in sun4c. */ /* XXX Implement this */ @@ -624,11 +533,7 @@ static inline void sun4c_init_map_kernelprom(unsigned long kernel_end) { unsigned long vaddr; unsigned char pseg, ctx; -#ifdef CONFIG_SUN4 - /* sun4/110 and 260 have no kadb. */ - if ((idprom->id_machtype != (SM_SUN4 | SM_4_260)) && - (idprom->id_machtype != (SM_SUN4 | SM_4_110))) { -#endif + for (vaddr = KADB_DEBUGGER_BEGVM; vaddr < LINUX_OPPROM_ENDVM; vaddr += SUN4C_REAL_PGDIR_SIZE) { @@ -640,9 +545,7 @@ static inline void sun4c_init_map_kernelprom(unsigned long kernel_end) fix_permissions(vaddr, _SUN4C_PAGE_PRIV, 0); } } -#ifdef CONFIG_SUN4 - } -#endif + for (vaddr = KERNBASE; vaddr < kernel_end; vaddr += SUN4C_REAL_PGDIR_SIZE) { pseg = sun4c_get_segmap(vaddr); mmu_entry_pool[pseg].locked = 1; @@ -1048,14 +951,10 @@ static struct thread_info *sun4c_alloc_thread_info(void) * so we must flush the cache to guarantee consistency. */ sun4c_flush_page(pages); -#ifndef CONFIG_SUN4 sun4c_flush_page(pages + PAGE_SIZE); -#endif sun4c_put_pte(addr, BUCKET_PTE(pages)); -#ifndef CONFIG_SUN4 sun4c_put_pte(addr + PAGE_SIZE, BUCKET_PTE(pages + PAGE_SIZE)); -#endif #ifdef CONFIG_DEBUG_STACK_USAGE memset((void *)addr, 0, PAGE_SIZE << THREAD_INFO_ORDER); @@ -1072,13 +971,11 @@ static void sun4c_free_thread_info(struct thread_info *ti) /* We are deleting a mapping, so the flush here is mandatory. */ sun4c_flush_page(tiaddr); -#ifndef CONFIG_SUN4 sun4c_flush_page(tiaddr + PAGE_SIZE); -#endif + sun4c_put_pte(tiaddr, 0); -#ifndef CONFIG_SUN4 sun4c_put_pte(tiaddr + PAGE_SIZE, 0); -#endif + sun4c_bucket[entry] = BUCKET_EMPTY; if (entry < sun4c_lowbucket_avail) sun4c_lowbucket_avail = entry; @@ -1211,7 +1108,7 @@ static void sun4c_unlockarea(char *vaddr, unsigned long size) * by implication and fool the page locking code above * if passed to by mistake. */ -static __u32 sun4c_get_scsi_one(char *bufptr, unsigned long len, struct sbus_bus *sbus) +static __u32 sun4c_get_scsi_one(struct device *dev, char *bufptr, unsigned long len) { unsigned long page; @@ -1223,7 +1120,7 @@ static __u32 sun4c_get_scsi_one(char *bufptr, unsigned long len, struct sbus_bus return (__u32)sun4c_lockarea(bufptr, len); } -static void sun4c_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void sun4c_get_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz) { while (sz != 0) { --sz; @@ -1233,14 +1130,14 @@ static void sun4c_get_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus * } } -static void sun4c_release_scsi_one(__u32 bufptr, unsigned long len, struct sbus_bus *sbus) +static void sun4c_release_scsi_one(struct device *dev, __u32 bufptr, unsigned long len) { if (bufptr < sun4c_iobuffer_start) return; /* On kernel stack or similar, see above */ sun4c_unlockarea((char *)bufptr, len); } -static void sun4c_release_scsi_sgl(struct scatterlist *sg, int sz, struct sbus_bus *sbus) +static void sun4c_release_scsi_sgl(struct device *dev, struct scatterlist *sg, int sz) { while (sz != 0) { --sz; @@ -2263,7 +2160,6 @@ void __init ld_mmu_sun4c(void) BTFIXUPSET_CALL(mmu_map_dma_area, sun4c_map_dma_area, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(mmu_unmap_dma_area, sun4c_unmap_dma_area, BTFIXUPCALL_NORM); - BTFIXUPSET_CALL(mmu_translate_dvma, sun4c_translate_dvma, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(sparc_mapiorange, sun4c_mapiorange, BTFIXUPCALL_NORM); BTFIXUPSET_CALL(sparc_unmapiorange, sun4c_unmapiorange, BTFIXUPCALL_NORM); diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c index 9ab815b95b5..17bb6035069 100644 --- a/arch/sparc/oprofile/init.c +++ b/arch/sparc/oprofile/init.c @@ -12,7 +12,7 @@ #include <linux/errno.h> #include <linux/init.h> -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { return -ENODEV; } diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile index 7f5eacfcfbc..8f7e18546c9 100644 --- a/arch/sparc/prom/Makefile +++ b/arch/sparc/prom/Makefile @@ -4,5 +4,3 @@ lib-y := bootstr.o devmap.o devops.o init.o memory.o misc.o mp.o \ palloc.o ranges.o segment.o console.o printf.o tree.o - -lib-$(CONFIG_SUN4) += sun4prom.o diff --git a/arch/sparc/prom/bootstr.c b/arch/sparc/prom/bootstr.c index 5a35c768ff7..916831da7e6 100644 --- a/arch/sparc/prom/bootstr.c +++ b/arch/sparc/prom/bootstr.c @@ -6,15 +6,12 @@ #include <linux/string.h> #include <asm/oplib.h> -#include <asm/sun4prom.h> #include <linux/init.h> #define BARG_LEN 256 static char barg_buf[BARG_LEN] = { 0 }; static char fetched __initdata = 0; -extern linux_sun4_romvec *sun4_romvec; - char * __init prom_getbootargs(void) { @@ -28,7 +25,6 @@ prom_getbootargs(void) switch(prom_vers) { case PROM_V0: - case PROM_SUN4: cp = barg_buf; /* Start from 1 and go over fd(0,0,0)kernel */ for(iter = 1; iter < 8; iter++) { diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c index 790057a3461..b3075d73fc1 100644 --- a/arch/sparc/prom/console.c +++ b/arch/sparc/prom/console.c @@ -10,7 +10,6 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <asm/openprom.h> -#include <asm/sun4prom.h> #include <asm/oplib.h> #include <asm/system.h> #include <linux/string.h> @@ -30,7 +29,6 @@ prom_nbgetchar(void) spin_lock_irqsave(&prom_lock, flags); switch(prom_vers) { case PROM_V0: - case PROM_SUN4: i = (*(romvec->pv_nbgetchar))(); break; case PROM_V2: @@ -63,7 +61,6 @@ prom_nbputchar(char c) spin_lock_irqsave(&prom_lock, flags); switch(prom_vers) { case PROM_V0: - case PROM_SUN4: i = (*(romvec->pv_nbputchar))(c); break; case PROM_V2: diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c index 729f8706694..873217c6d82 100644 --- a/arch/sparc/prom/init.c +++ b/arch/sparc/prom/init.c @@ -11,12 +11,10 @@ #include <asm/openprom.h> #include <asm/oplib.h> -#include <asm/sun4prom.h> struct linux_romvec *romvec; enum prom_major_version prom_vers; unsigned int prom_rev, prom_prev; -linux_sun4_romvec *sun4_romvec; /* The root node of the prom device tree. */ int prom_root_node; @@ -34,10 +32,6 @@ extern void prom_ranges_init(void); void __init prom_init(struct linux_romvec *rp) { -#ifdef CONFIG_SUN4 - extern struct linux_romvec *sun4_prom_init(void); - rp = sun4_prom_init(); -#endif romvec = rp; switch(romvec->pv_romvers) { @@ -50,9 +44,6 @@ void __init prom_init(struct linux_romvec *rp) case 3: prom_vers = PROM_V3; break; - case 40: - prom_vers = PROM_SUN4; - break; default: prom_printf("PROMLIB: Bad PROM version %d\n", romvec->pv_romvers); @@ -76,11 +67,8 @@ void __init prom_init(struct linux_romvec *rp) prom_ranges_init(); -#ifndef CONFIG_SUN4 - /* SUN4 prints this in sun4_prom_init */ printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n", romvec->pv_romvers, prom_rev); -#endif /* Initialization successful. */ return; diff --git a/arch/sparc/prom/memory.c b/arch/sparc/prom/memory.c index 947f047dc95..fac7899a29c 100644 --- a/arch/sparc/prom/memory.c +++ b/arch/sparc/prom/memory.c @@ -10,7 +10,6 @@ #include <linux/init.h> #include <asm/openprom.h> -#include <asm/sun4prom.h> #include <asm/oplib.h> #include <asm/page.h> @@ -46,15 +45,6 @@ static int __init prom_meminit_v2(void) return num_ents; } -static int __init prom_meminit_sun4(void) -{ -#ifdef CONFIG_SUN4 - sp_banks[0].base_addr = 0; - sp_banks[0].num_bytes = *(sun4_romvec->memoryavail); -#endif - return 1; -} - static int sp_banks_cmp(const void *a, const void *b) { const struct sparc_phys_banks *x = a, *y = b; @@ -81,10 +71,6 @@ void __init prom_meminit(void) num_ents = prom_meminit_v2(); break; - case PROM_SUN4: - num_ents = prom_meminit_sun4(); - break; - default: break; } diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c index f9b7def35f6..64579a37641 100644 --- a/arch/sparc/prom/ranges.c +++ b/arch/sparc/prom/ranges.c @@ -9,7 +9,6 @@ #include <asm/openprom.h> #include <asm/oplib.h> #include <asm/types.h> -#include <asm/sbus.h> #include <asm/system.h> struct linux_prom_ranges promlib_obio_ranges[PROMREG_MAX]; diff --git a/arch/sparc/prom/sun4prom.c b/arch/sparc/prom/sun4prom.c deleted file mode 100644 index 00390a2652a..00000000000 --- a/arch/sparc/prom/sun4prom.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (C) 1996 The Australian National University. - * Copyright (C) 1996 Fujitsu Laboratories Limited - * Copyright (C) 1997 Michael A. Griffith (grif@acm.org) - * Copyright (C) 1997 Sun Weenie (ko@ko.reno.nv.us) - * Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) - * - * This software may be distributed under the terms of the Gnu - * Public License version 2 or later - * - * fake a really simple Sun prom for the SUN4 - */ - -#include <linux/kernel.h> -#include <linux/string.h> -#include <asm/oplib.h> -#include <asm/idprom.h> -#include <asm/machines.h> -#include <asm/sun4prom.h> -#include <asm/asi.h> -#include <asm/contregs.h> -#include <linux/init.h> - -static struct linux_romvec sun4romvec; -static struct idprom sun4_idprom; - -struct property { - char *name; - char *value; - int length; -}; - -struct node { - int level; - struct property *properties; -}; - -struct property null_properties = { NULL, NULL, -1 }; - -struct property root_properties[] = { - {"device_type", "cpu", 4}, - {"idprom", (char *)&sun4_idprom, sizeof(struct idprom)}, - {NULL, NULL, -1} -}; - -struct node nodes[] = { - { 0, &null_properties }, - { 0, root_properties }, - { -1,&null_properties } -}; - - -static int no_nextnode(int node) -{ - if (nodes[node].level == nodes[node+1].level) - return node+1; - return -1; -} - -static int no_child(int node) -{ - if (nodes[node].level == nodes[node+1].level-1) - return node+1; - return -1; -} - -static struct property *find_property(int node,char *name) -{ - struct property *prop = &nodes[node].properties[0]; - while (prop && prop->name) { - if (strcmp(prop->name,name) == 0) return prop; - prop++; - } - return NULL; -} - -static int no_proplen(int node,char *name) -{ - struct property *prop = find_property(node,name); - if (prop) return prop->length; - return -1; -} - -static int no_getprop(int node,char *name,char *value) -{ - struct property *prop = find_property(node,name); - if (prop) { - memcpy(value,prop->value,prop->length); - return 1; - } - return -1; -} - -static int no_setprop(int node,char *name,char *value,int len) -{ - return -1; -} - -static char *no_nextprop(int node,char *name) -{ - struct property *prop = find_property(node,name); - if (prop) return prop[1].name; - return NULL; -} - -static struct linux_nodeops sun4_nodeops = { - no_nextnode, - no_child, - no_proplen, - no_getprop, - no_setprop, - no_nextprop -}; - -static int synch_hook; - -struct linux_romvec * __init sun4_prom_init(void) -{ - int i; - unsigned char x; - char *p; - - p = (char *)&sun4_idprom; - for (i = 0; i < sizeof(sun4_idprom); i++) { - __asm__ __volatile__ ("lduba [%1] %2, %0" : "=r" (x) : - "r" (AC_IDPROM + i), "i" (ASI_CONTROL)); - *p++ = x; - } - - memset(&sun4romvec,0,sizeof(sun4romvec)); - - sun4_romvec = (linux_sun4_romvec *) SUN4_PROM_VECTOR; - - sun4romvec.pv_romvers = 40; - sun4romvec.pv_nodeops = &sun4_nodeops; - sun4romvec.pv_reboot = sun4_romvec->reboot; - sun4romvec.pv_abort = sun4_romvec->abortentry; - sun4romvec.pv_halt = sun4_romvec->exittomon; - sun4romvec.pv_synchook = (void (**)(void))&synch_hook; - sun4romvec.pv_setctxt = sun4_romvec->setcxsegmap; - sun4romvec.pv_v0bootargs = sun4_romvec->bootParam; - sun4romvec.pv_nbgetchar = sun4_romvec->mayget; - sun4romvec.pv_nbputchar = sun4_romvec->mayput; - sun4romvec.pv_stdin = sun4_romvec->insource; - sun4romvec.pv_stdout = sun4_romvec->outsink; - - /* - * We turn on the LEDs to let folks without monitors or - * terminals know we booted. Nothing too fancy now. They - * are all on, except for LED 5, which blinks. When we - * have more time, we can teach the penguin to say "By your - * command" or "Activating turbo boost, Michael". :-) - */ - sun4_romvec->setLEDs(NULL); - - printk("PROMLIB: Old Sun4 boot PROM monitor %s, romvec version %d\n", - sun4_romvec->monid, - sun4_romvec->romvecversion); - - return &sun4romvec; -} |