1 files changed, 72 insertions, 0 deletions
diff --git a/arch/sparc/include/asm/switch_to_64.h b/arch/sparc/include/asm/switch_to_64.h
new file mode 100644
index 00000000000..7923c4a2be3
--- /dev/null
+++ b/arch/sparc/include/asm/switch_to_64.h
@@ -0,0 +1,72 @@
+#ifndef __SPARC64_SWITCH_TO_64_H
+#define __SPARC64_SWITCH_TO_64_H
+
+#include <asm/visasm.h>
+
+#define prepare_arch_switch(next)		\
+do {						\
+	flushw_all();				\
+} while (0)
+
+	/* See what happens when you design the chip correctly?
+	 *
+	 * We tell gcc we clobber all non-fixed-usage registers except
+	 * for l0/l1.  It will use one for 'next' and the other to hold
+	 * the output value of 'last'.  'next' is not referenced again
+	 * past the invocation of switch_to in the scheduler, so we need
+	 * not preserve it's value.  Hairy, but it lets us remove 2 loads
+	 * and 2 stores in this critical code path.  -DaveM
+	 */
+#define switch_to(prev, next, last)					\
+do {	flush_tlb_pending();						\
+	save_and_clear_fpu();						\
+	/* If you are tempted to conditionalize the following */	\
+	/* so that ASI is only written if it changes, think again. */	\
+	__asm__ __volatile__("wr %%g0, %0, %%asi"			\
+	: : "r" (__thread_flag_byte_ptr(task_thread_info(next))[TI_FLAG_BYTE_CURRENT_DS]));\
+	trap_block[current_thread_info()->cpu].thread =			\
+		task_thread_info(next);					\
+	__asm__ __volatile__(						\
+	"mov	%%g4, %%g7\n\t"						\
+	"stx	%%i6, [%%sp + 2047 + 0x70]\n\t"				\
+	"stx	%%i7, [%%sp + 2047 + 0x78]\n\t"				\
+	"rdpr	%%wstate, %%o5\n\t"					\
+	"stx	%%o6, [%%g6 + %6]\n\t"					\
+	"stb	%%o5, [%%g6 + %5]\n\t"					\
+	"rdpr	%%cwp, %%o5\n\t"					\
+	"stb	%%o5, [%%g6 + %8]\n\t"					\
+	"wrpr	%%g0, 15, %%pil\n\t"					\
+	"mov	%4, %%g6\n\t"						\
+	"ldub	[%4 + %8], %%g1\n\t"					\
+	"wrpr	%%g1, %%cwp\n\t"					\
+	"ldx	[%%g6 + %6], %%o6\n\t"					\
+	"ldub	[%%g6 + %5], %%o5\n\t"					\
+	"ldub	[%%g6 + %7], %%o7\n\t"					\
+	"wrpr	%%o5, 0x0, %%wstate\n\t"				\
+	"ldx	[%%sp + 2047 + 0x70], %%i6\n\t"				\
+	"ldx	[%%sp + 2047 + 0x78], %%i7\n\t"				\
+	"ldx	[%%g6 + %9], %%g4\n\t"					\
+	"wrpr	%%g0, 14, %%pil\n\t"					\
+	"brz,pt %%o7, switch_to_pc\n\t"					\
+	" mov	%%g7, %0\n\t"						\
+	"sethi	%%hi(ret_from_syscall), %%g1\n\t"			\
+	"jmpl	%%g1 + %%lo(ret_from_syscall), %%g0\n\t"		\
+	" nop\n\t"							\
+	".globl switch_to_pc\n\t"					\
+	"switch_to_pc:\n\t"						\
+	: "=&r" (last), "=r" (current), "=r" (current_thread_info_reg),	\
+	  "=r" (__local_per_cpu_offset)					\
+	: "0" (task_thread_info(next)),					\
+	  "i" (TI_WSTATE), "i" (TI_KSP), "i" (TI_NEW_CHILD),            \
+	  "i" (TI_CWP), "i" (TI_TASK)					\
+	: "cc",								\
+	        "g1", "g2", "g3",                   "g7",		\
+	        "l1", "l2", "l3", "l4", "l5", "l6", "l7",		\
+	  "i0", "i1", "i2", "i3", "i4", "i5",				\
+	  "o0", "o1", "o2", "o3", "o4", "o5",       "o7");		\
+} while(0)
+
+extern void synchronize_user_stack(void);
+extern void fault_in_user_windows(void);
+
+#endif /* __SPARC64_SWITCH_TO_64_H */