diff options
Diffstat (limited to 'arch/sparc/include/asm/sbus_64.h')
| -rw-r--r-- | arch/sparc/include/asm/sbus_64.h | 190 |
1 files changed, 0 insertions, 190 deletions
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h deleted file mode 100644 index b606c14343f..00000000000 --- a/arch/sparc/include/asm/sbus_64.h +++ /dev/null @@ -1,190 +0,0 @@ -/* sbus.h: Defines for the Sun SBus. - * - * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net) - */ - -#ifndef _SPARC64_SBUS_H -#define _SPARC64_SBUS_H - -#include <linux/dma-mapping.h> -#include <linux/ioport.h> -#include <linux/of_device.h> - -#include <asm/oplib.h> -#include <asm/prom.h> -#include <asm/iommu.h> -#include <asm/scatterlist.h> - -/* We scan which devices are on the SBus using the PROM node device - * tree. SBus devices are described in two different ways. You can - * either get an absolute address at which to access the device, or - * you can get a SBus 'slot' number and an offset within that slot. - */ - -/* The base address at which to calculate device OBIO addresses. */ -#define SUN_SBUS_BVADDR 0x00000000 -#define SBUS_OFF_MASK 0x0fffffff - -/* These routines are used to calculate device address from slot - * numbers + offsets, and vice versa. - */ - -static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) -{ - return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset)); -} - -static inline int sbus_dev_slot(unsigned long dev_addr) -{ - return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28); -} - -struct sbus_bus; - -/* Linux SBUS device tables */ -struct sbus_dev { - struct of_device ofdev; - struct sbus_bus *bus; - struct sbus_dev *next; - struct sbus_dev *child; - struct sbus_dev *parent; - int prom_node; - char prom_name[64]; - int slot; - - struct resource resource[PROMREG_MAX]; - - struct linux_prom_registers reg_addrs[PROMREG_MAX]; - int num_registers; - - struct linux_prom_ranges device_ranges[PROMREG_MAX]; - int num_device_ranges; - - unsigned int irqs[4]; - int num_irqs; -}; -#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) - -/* This struct describes the SBus(s) found on this machine. */ -struct sbus_bus { - struct of_device ofdev; - struct sbus_dev *devices; /* Tree of SBUS devices */ - struct sbus_bus *next; /* Next SBUS in system */ - int prom_node; /* OBP node of SBUS */ - char prom_name[64]; /* Usually "sbus" or "sbi" */ - int clock_freq; - - struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; - int num_sbus_ranges; - - int portid; -}; -#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) - -extern struct sbus_bus *sbus_root; - -/* Device probing routines could find these handy */ -#define for_each_sbus(bus) \ - for((bus) = sbus_root; (bus); (bus)=(bus)->next) - -#define for_each_sbusdev(device, bus) \ - for((device) = (bus)->devices; (device); (device)=(device)->next) - -#define for_all_sbusdev(device, bus) \ - for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ - for ((device) = (bus)->devices; (device); (device) = (device)->next) - -/* Driver DVMA interfaces. */ -#define sbus_can_dma_64bit(sdev) (1) -#define sbus_can_burst64(sdev) (1) -extern void sbus_set_sbus64(struct sbus_dev *, int); -extern void sbus_fill_device_irq(struct sbus_dev *); - -static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size, - dma_addr_t *dma_handle) -{ - return dma_alloc_coherent(&sdev->ofdev.dev, size, - dma_handle, GFP_ATOMIC); -} - -static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size, - void *vaddr, dma_addr_t dma_handle) -{ - return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle); -} - -#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL -#define SBUS_DMA_TODEVICE DMA_TO_DEVICE -#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE -#define SBUS_DMA_NONE DMA_NONE - -/* All the rest use streaming mode mappings. */ -static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, - size_t size, int direction) -{ - return dma_map_single(&sdev->ofdev.dev, ptr, size, - (enum dma_data_direction) direction); -} - -static inline void sbus_unmap_single(struct sbus_dev *sdev, - dma_addr_t dma_addr, size_t size, - int direction) -{ - dma_unmap_single(&sdev->ofdev.dev, dma_addr, size, - (enum dma_data_direction) direction); -} - -static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, - int nents, int direction) -{ - return dma_map_sg(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} - -static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, - int nents, int direction) -{ - dma_unmap_sg(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} - -/* Finally, allow explicit synchronization of streamable mappings. */ -static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, - dma_addr_t dma_handle, - size_t size, int direction) -{ - dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size, - (enum dma_data_direction) direction); -} -#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu - -static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, - dma_addr_t dma_handle, - size_t size, int direction) -{ - /* No flushing needed to sync cpu writes to the device. */ -} - -static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, - struct scatterlist *sg, - int nents, int direction) -{ - dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents, - (enum dma_data_direction) direction); -} -#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu - -static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, - struct scatterlist *sg, - int nents, int direction) -{ - /* No flushing needed to sync cpu writes to the device. */ -} - -extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); -extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); -extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); -extern int sbus_arch_preinit(void); -extern void sbus_arch_postinit(void); - -#endif /* !(_SPARC64_SBUS_H) */ |