diff options
Diffstat (limited to 'arch/sparc/include/asm/sbus_64.h')
| -rw-r--r-- | arch/sparc/include/asm/sbus_64.h | 190 |
1 files changed, 190 insertions, 0 deletions
diff --git a/arch/sparc/include/asm/sbus_64.h b/arch/sparc/include/asm/sbus_64.h new file mode 100644 index 00000000000..0e16b6dd7e9 --- /dev/null +++ b/arch/sparc/include/asm/sbus_64.h @@ -0,0 +1,190 @@ +/* sbus.h: Defines for the Sun SBus. + * + * Copyright (C) 1996, 1999, 2007 David S. Miller (davem@davemloft.net) + */ + +#ifndef _SPARC64_SBUS_H +#define _SPARC64_SBUS_H + +#include <linux/dma-mapping.h> +#include <linux/ioport.h> + +#include <asm/oplib.h> +#include <asm/prom.h> +#include <asm/of_device.h> +#include <asm/iommu.h> +#include <asm/scatterlist.h> + +/* We scan which devices are on the SBus using the PROM node device + * tree. SBus devices are described in two different ways. You can + * either get an absolute address at which to access the device, or + * you can get a SBus 'slot' number and an offset within that slot. + */ + +/* The base address at which to calculate device OBIO addresses. */ +#define SUN_SBUS_BVADDR 0x00000000 +#define SBUS_OFF_MASK 0x0fffffff + +/* These routines are used to calculate device address from slot + * numbers + offsets, and vice versa. + */ + +static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) +{ + return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<28)+(offset)); +} + +static inline int sbus_dev_slot(unsigned long dev_addr) +{ + return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>28); +} + +struct sbus_bus; + +/* Linux SBUS device tables */ +struct sbus_dev { + struct of_device ofdev; + struct sbus_bus *bus; + struct sbus_dev *next; + struct sbus_dev *child; + struct sbus_dev *parent; + int prom_node; + char prom_name[64]; + int slot; + + struct resource resource[PROMREG_MAX]; + + struct linux_prom_registers reg_addrs[PROMREG_MAX]; + int num_registers; + + struct linux_prom_ranges device_ranges[PROMREG_MAX]; + int num_device_ranges; + + unsigned int irqs[4]; + int num_irqs; +}; +#define to_sbus_device(d) container_of(d, struct sbus_dev, ofdev.dev) + +/* This struct describes the SBus(s) found on this machine. */ +struct sbus_bus { + struct of_device ofdev; + struct sbus_dev *devices; /* Tree of SBUS devices */ + struct sbus_bus *next; /* Next SBUS in system */ + int prom_node; /* OBP node of SBUS */ + char prom_name[64]; /* Usually "sbus" or "sbi" */ + int clock_freq; + + struct linux_prom_ranges sbus_ranges[PROMREG_MAX]; + int num_sbus_ranges; + + int portid; +}; +#define to_sbus(d) container_of(d, struct sbus_bus, ofdev.dev) + +extern struct sbus_bus *sbus_root; + +/* Device probing routines could find these handy */ +#define for_each_sbus(bus) \ + for((bus) = sbus_root; (bus); (bus)=(bus)->next) + +#define for_each_sbusdev(device, bus) \ + for((device) = (bus)->devices; (device); (device)=(device)->next) + +#define for_all_sbusdev(device, bus) \ + for ((bus) = sbus_root; (bus); (bus) = (bus)->next) \ + for ((device) = (bus)->devices; (device); (device) = (device)->next) + +/* Driver DVMA interfaces. */ +#define sbus_can_dma_64bit(sdev) (1) +#define sbus_can_burst64(sdev) (1) +extern void sbus_set_sbus64(struct sbus_dev *, int); +extern void sbus_fill_device_irq(struct sbus_dev *); + +static inline void *sbus_alloc_consistent(struct sbus_dev *sdev , size_t size, + dma_addr_t *dma_handle) +{ + return dma_alloc_coherent(&sdev->ofdev.dev, size, + dma_handle, GFP_ATOMIC); +} + +static inline void sbus_free_consistent(struct sbus_dev *sdev, size_t size, + void *vaddr, dma_addr_t dma_handle) +{ + return dma_free_coherent(&sdev->ofdev.dev, size, vaddr, dma_handle); +} + +#define SBUS_DMA_BIDIRECTIONAL DMA_BIDIRECTIONAL +#define SBUS_DMA_TODEVICE DMA_TO_DEVICE +#define SBUS_DMA_FROMDEVICE DMA_FROM_DEVICE +#define SBUS_DMA_NONE DMA_NONE + +/* All the rest use streaming mode mappings. */ +static inline dma_addr_t sbus_map_single(struct sbus_dev *sdev, void *ptr, + size_t size, int direction) +{ + return dma_map_single(&sdev->ofdev.dev, ptr, size, + (enum dma_data_direction) direction); +} + +static inline void sbus_unmap_single(struct sbus_dev *sdev, + dma_addr_t dma_addr, size_t size, + int direction) +{ + dma_unmap_single(&sdev->ofdev.dev, dma_addr, size, + (enum dma_data_direction) direction); +} + +static inline int sbus_map_sg(struct sbus_dev *sdev, struct scatterlist *sg, + int nents, int direction) +{ + return dma_map_sg(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} + +static inline void sbus_unmap_sg(struct sbus_dev *sdev, struct scatterlist *sg, + int nents, int direction) +{ + dma_unmap_sg(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} + +/* Finally, allow explicit synchronization of streamable mappings. */ +static inline void sbus_dma_sync_single_for_cpu(struct sbus_dev *sdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + dma_sync_single_for_cpu(&sdev->ofdev.dev, dma_handle, size, + (enum dma_data_direction) direction); +} +#define sbus_dma_sync_single sbus_dma_sync_single_for_cpu + +static inline void sbus_dma_sync_single_for_device(struct sbus_dev *sdev, + dma_addr_t dma_handle, + size_t size, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +static inline void sbus_dma_sync_sg_for_cpu(struct sbus_dev *sdev, + struct scatterlist *sg, + int nents, int direction) +{ + dma_sync_sg_for_cpu(&sdev->ofdev.dev, sg, nents, + (enum dma_data_direction) direction); +} +#define sbus_dma_sync_sg sbus_dma_sync_sg_for_cpu + +static inline void sbus_dma_sync_sg_for_device(struct sbus_dev *sdev, + struct scatterlist *sg, + int nents, int direction) +{ + /* No flushing needed to sync cpu writes to the device. */ +} + +extern void sbus_arch_bus_ranges_init(struct device_node *, struct sbus_bus *); +extern void sbus_setup_iommu(struct sbus_bus *, struct device_node *); +extern void sbus_setup_arch_props(struct sbus_bus *, struct device_node *); +extern int sbus_arch_preinit(void); +extern void sbus_arch_postinit(void); + +#endif /* !(_SPARC64_SBUS_H) */ |