diff options
Diffstat (limited to 'arch/sh')
-rw-r--r-- | arch/sh/Kconfig.debug | 4 | ||||
-rw-r--r-- | arch/sh/kernel/kgdb_stub.c | 386 |
2 files changed, 4 insertions, 386 deletions
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 6be2385c1ad..931c620dbc2 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -104,10 +104,6 @@ config KGDB_NMI bool "Enter KGDB on NMI" default n -config KGDB_THREAD - bool "Include KGDB thread support" - default y - config SH_KGDB_CONSOLE bool "Console messages through GDB" depends on !SERIAL_SH_SCI_CONSOLE diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c index 737eadc8ce0..a5323364cbc 100644 --- a/arch/sh/kernel/kgdb_stub.c +++ b/arch/sh/kernel/kgdb_stub.c @@ -243,14 +243,6 @@ static char out_buffer[OUTBUFMAX]; static void kgdb_to_gdb(const char *s); -#ifdef CONFIG_KGDB_THREAD -static struct task_struct *trapped_thread; -static struct task_struct *current_thread; -typedef unsigned char threadref[8]; -#define BUF_THREAD_ID_SIZE 16 -#endif - - /* Convert ch to hex */ static int hex(const char ch) { @@ -346,66 +338,6 @@ static char *pack_hex_byte(char *pkt, int byte) return pkt; } -#ifdef CONFIG_KGDB_THREAD - -/* Pack a thread ID */ -static char *pack_threadid(char *pkt, threadref * id) -{ - char *limit; - unsigned char *altid; - - altid = (unsigned char *) id; - - limit = pkt + BUF_THREAD_ID_SIZE; - while (pkt < limit) - pkt = pack_hex_byte(pkt, *altid++); - return pkt; -} - -/* Convert an integer into our threadref */ -static void int_to_threadref(threadref * id, const int value) -{ - unsigned char *scan = (unsigned char *) id; - int i = 4; - - while (i--) - *scan++ = 0; - - *scan++ = (value >> 24) & 0xff; - *scan++ = (value >> 16) & 0xff; - *scan++ = (value >> 8) & 0xff; - *scan++ = (value & 0xff); -} - -/* Return a task structure ptr for a particular pid */ -static struct task_struct *get_thread(int pid) -{ - struct task_struct *thread; - - /* Use PID_MAX w/gdb for pid 0 */ - if (pid == PID_MAX) pid = 0; - - /* First check via PID */ - thread = find_task_by_pid(pid); - - if (thread) - return thread; - - /* Start at the start */ - thread = init_tasks[0]; - - /* Walk along the linked list of tasks */ - do { - if (thread->pid == pid) - return thread; - thread = thread->next_task; - } while (thread != init_tasks[0]); - - return NULL; -} - -#endif /* CONFIG_KGDB_THREAD */ - /* Scan for the start char '$', read the packet and check the checksum */ static void get_packet(char *buffer, int buflen) { @@ -608,74 +540,6 @@ static void gdb_regs_to_kgdb_regs(const int *gdb_regs, regs->vbr = gdb_regs[VBR]; } -#ifdef CONFIG_KGDB_THREAD -/* Make a local copy of registers from the specified thread */ -asmlinkage void ret_from_fork(void); -static void thread_regs_to_gdb_regs(const struct task_struct *thread, - int *gdb_regs) -{ - int regno; - int *tregs; - - /* Initialize to zero */ - for (regno = 0; regno < MAXREG; regno++) - gdb_regs[regno] = 0; - - /* Just making sure... */ - if (thread == NULL) - return; - - /* A new fork has pt_regs on the stack from a fork() call */ - if (thread->thread.pc == (unsigned long)ret_from_fork) { - - int vbr_val; - struct pt_regs *kregs; - kregs = (struct pt_regs*)thread->thread.sp; - - gdb_regs[R0] = kregs->regs[R0]; - gdb_regs[R1] = kregs->regs[R1]; - gdb_regs[R2] = kregs->regs[R2]; - gdb_regs[R3] = kregs->regs[R3]; - gdb_regs[R4] = kregs->regs[R4]; - gdb_regs[R5] = kregs->regs[R5]; - gdb_regs[R6] = kregs->regs[R6]; - gdb_regs[R7] = kregs->regs[R7]; - gdb_regs[R8] = kregs->regs[R8]; - gdb_regs[R9] = kregs->regs[R9]; - gdb_regs[R10] = kregs->regs[R10]; - gdb_regs[R11] = kregs->regs[R11]; - gdb_regs[R12] = kregs->regs[R12]; - gdb_regs[R13] = kregs->regs[R13]; - gdb_regs[R14] = kregs->regs[R14]; - gdb_regs[R15] = kregs->regs[R15]; - gdb_regs[PC] = kregs->pc; - gdb_regs[PR] = kregs->pr; - gdb_regs[GBR] = kregs->gbr; - gdb_regs[MACH] = kregs->mach; - gdb_regs[MACL] = kregs->macl; - gdb_regs[SR] = kregs->sr; - - asm("stc vbr, %0":"=r"(vbr_val)); - gdb_regs[VBR] = vbr_val; - return; - } - - /* Otherwise, we have only some registers from switch_to() */ - tregs = (int *)thread->thread.sp; - gdb_regs[R15] = (int)tregs; - gdb_regs[R14] = *tregs++; - gdb_regs[R13] = *tregs++; - gdb_regs[R12] = *tregs++; - gdb_regs[R11] = *tregs++; - gdb_regs[R10] = *tregs++; - gdb_regs[R9] = *tregs++; - gdb_regs[R8] = *tregs++; - gdb_regs[PR] = *tregs++; - gdb_regs[GBR] = *tregs++; - gdb_regs[PC] = thread->thread.pc; -} -#endif /* CONFIG_KGDB_THREAD */ - /* Calculate the new address for after a step */ static short *get_step_address(void) { @@ -794,37 +658,11 @@ static void undo_single_step(void) /* Send a signal message */ static void send_signal_msg(const int signum) { -#ifndef CONFIG_KGDB_THREAD out_buffer[0] = 'S'; out_buffer[1] = highhex(signum); out_buffer[2] = lowhex(signum); out_buffer[3] = 0; put_packet(out_buffer); -#else /* CONFIG_KGDB_THREAD */ - int threadid; - threadref thref; - char *out = out_buffer; - const char *tstring = "thread"; - - *out++ = 'T'; - *out++ = highhex(signum); - *out++ = lowhex(signum); - - while (*tstring) { - *out++ = *tstring++; - } - *out++ = ':'; - - threadid = trapped_thread->pid; - if (threadid == 0) threadid = PID_MAX; - int_to_threadref(&thref, threadid); - pack_threadid(out, &thref); - out += BUF_THREAD_ID_SIZE; - *out++ = ';'; - - *out = 0; - put_packet(out_buffer); -#endif /* CONFIG_KGDB_THREAD */ } /* Reply that all was well */ @@ -959,15 +797,7 @@ static void step_with_sig_msg(void) /* Send register contents */ static void send_regs_msg(void) { -#ifdef CONFIG_KGDB_THREAD - if (!current_thread) - kgdb_regs_to_gdb_regs(&trap_registers, registers); - else - thread_regs_to_gdb_regs(current_thread, registers); -#else kgdb_regs_to_gdb_regs(&trap_registers, registers); -#endif - mem_to_hex((char *) registers, out_buffer, NUMREGBYTES); put_packet(out_buffer); } @@ -975,198 +805,11 @@ static void send_regs_msg(void) /* Set register contents - currently can't set other thread's registers */ static void set_regs_msg(void) { -#ifdef CONFIG_KGDB_THREAD - if (!current_thread) { -#endif - kgdb_regs_to_gdb_regs(&trap_registers, registers); - hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES); - gdb_regs_to_kgdb_regs(registers, &trap_registers); - send_ok_msg(); -#ifdef CONFIG_KGDB_THREAD - } else - send_err_msg(); -#endif -} - - -#ifdef CONFIG_KGDB_THREAD - -/* Set the status for a thread */ -void set_thread_msg(void) -{ - int threadid; - struct task_struct *thread = NULL; - char *ptr; - - switch (in_buffer[1]) { - /* To select which thread for gG etc messages, i.e. supported */ - case 'g': - ptr = &in_buffer[2]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - - /* If we haven't found it */ - if (!thread) { - send_err_msg(); - break; - } - - /* Set current_thread (or not) */ - if (thread == trapped_thread) - current_thread = NULL; - else - current_thread = thread; - send_ok_msg(); - break; - - /* To select which thread for cCsS messages, i.e. unsupported */ - case 'c': - send_ok_msg(); - break; - - default: - send_empty_msg(); - break; - } -} - -/* Is a thread alive? */ -static void thread_status_msg(void) -{ - char *ptr; - int threadid; - struct task_struct *thread = NULL; - - ptr = &in_buffer[1]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - if (thread) - send_ok_msg(); - else - send_err_msg(); -} -/* Send the current thread ID */ -static void thread_id_msg(void) -{ - int threadid; - threadref thref; - - out_buffer[0] = 'Q'; - out_buffer[1] = 'C'; - - if (current_thread) - threadid = current_thread->pid; - else if (trapped_thread) - threadid = trapped_thread->pid; - else /* Impossible, but just in case! */ - { - send_err_msg(); - return; - } - - /* Translate pid 0 to PID_MAX for gdb */ - if (threadid == 0) threadid = PID_MAX; - - int_to_threadref(&thref, threadid); - pack_threadid(out_buffer + 2, &thref); - out_buffer[2 + BUF_THREAD_ID_SIZE] = '\0'; - put_packet(out_buffer); -} - -/* Send thread info */ -static void thread_info_msg(void) -{ - struct task_struct *thread = NULL; - int threadid; - char *pos; - threadref thref; - - /* Start with 'm' */ - out_buffer[0] = 'm'; - pos = &out_buffer[1]; - - /* For all possible thread IDs - this will overrun if > 44 threads! */ - /* Start at 1 and include PID_MAX (since GDB won't use pid 0...) */ - for (threadid = 1; threadid <= PID_MAX; threadid++) { - - read_lock(&tasklist_lock); - thread = get_thread(threadid); - read_unlock(&tasklist_lock); - - /* If it's a valid thread */ - if (thread) { - int_to_threadref(&thref, threadid); - pack_threadid(pos, &thref); - pos += BUF_THREAD_ID_SIZE; - *pos++ = ','; - } - } - *--pos = 0; /* Lose final comma */ - put_packet(out_buffer); - -} - -/* Return printable info for gdb's 'info threads' command */ -static void thread_extra_info_msg(void) -{ - int threadid; - struct task_struct *thread = NULL; - char buffer[20], *ptr; - int i; - - /* Extract thread ID */ - ptr = &in_buffer[17]; - hex_to_int(&ptr, &threadid); - thread = get_thread(threadid); - - /* If we don't recognise it, say so */ - if (thread == NULL) - strcpy(buffer, "(unknown)"); - else - strcpy(buffer, thread->comm); - - /* Construct packet */ - for (i = 0, ptr = out_buffer; buffer[i]; i++) - ptr = pack_hex_byte(ptr, buffer[i]); - - if (thread->thread.pc == (unsigned long)ret_from_fork) { - strcpy(buffer, "<new fork>"); - for (i = 0; buffer[i]; i++) - ptr = pack_hex_byte(ptr, buffer[i]); - } - - *ptr = '\0'; - put_packet(out_buffer); -} - -/* Handle all qFooBarBaz messages - have to use an if statement as - opposed to a switch because q messages can have > 1 char id. */ -static void query_msg(void) -{ - const char *q_start = &in_buffer[1]; - - /* qC = return current thread ID */ - if (strncmp(q_start, "C", 1) == 0) - thread_id_msg(); - - /* qfThreadInfo = query all threads (first) */ - else if (strncmp(q_start, "fThreadInfo", 11) == 0) - thread_info_msg(); - - /* qsThreadInfo = query all threads (subsequent). We know we have sent - them all after the qfThreadInfo message, so there are no to send */ - else if (strncmp(q_start, "sThreadInfo", 11) == 0) - put_packet("l"); /* el = last */ - - /* qThreadExtraInfo = supply printable information per thread */ - else if (strncmp(q_start, "ThreadExtraInfo", 15) == 0) - thread_extra_info_msg(); - - /* Unsupported - empty message as per spec */ - else - send_empty_msg(); + kgdb_regs_to_gdb_regs(&trap_registers, registers); + hex_to_mem(&in_buffer[1], (char *) registers, NUMREGBYTES); + gdb_regs_to_kgdb_regs(registers, &trap_registers); + send_ok_msg(); } -#endif /* CONFIG_KGDB_THREAD */ #ifdef CONFIG_SH_KGDB_CONSOLE /* @@ -1206,12 +849,6 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) if (!kgdb_enabled) return; -#ifdef CONFIG_KGDB_THREAD - /* Until GDB specifies a thread */ - current_thread = NULL; - trapped_thread = current; -#endif - /* Enter GDB mode (e.g. after detach) */ if (!kgdb_in_gdb_mode) { /* Do serial setup, notify user, issue preemptive ack */ @@ -1284,21 +921,6 @@ static void kgdb_command_loop(const int excep_code, const int trapa_value) step_msg(); return; -#ifdef CONFIG_KGDB_THREAD - - case 'H': /* Task related */ - set_thread_msg(); - break; - - case 'T': /* Query thread status */ - thread_status_msg(); - break; - - case 'q': /* Handle query - currently thread-related */ - query_msg(); - break; -#endif - case 'k': /* 'Kill the program' with a kernel ? */ break; |