diff options
Diffstat (limited to 'arch/sh/drivers')
| -rw-r--r-- | arch/sh/drivers/dma/Kconfig | 46 | ||||
| -rw-r--r-- | arch/sh/drivers/dma/Makefile | 3 | ||||
| -rw-r--r-- | arch/sh/drivers/dma/dma-sh.c | 169 | ||||
| -rw-r--r-- | arch/sh/drivers/dma/dma-sh.h | 75 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/ops-sh7785lcr.c | 14 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.c | 16 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci-sh7780.h | 2 | ||||
| -rw-r--r-- | arch/sh/drivers/pci/pci.c | 3 |
8 files changed, 172 insertions, 156 deletions
diff --git a/arch/sh/drivers/dma/Kconfig b/arch/sh/drivers/dma/Kconfig index 01936368b8b..666713ac5fc 100644 --- a/arch/sh/drivers/dma/Kconfig +++ b/arch/sh/drivers/dma/Kconfig @@ -9,16 +9,28 @@ config SH_DMA select SH_DMA_API default n +config SH_DMA_IRQ_MULTI + bool + depends on SH_DMA + default y if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \ + CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7750R || \ + CPU_SUBTYPE_SH7751R || CPU_SUBTYPE_SH7091 || \ + CPU_SUBTYPE_SH7763 || CPU_SUBTYPE_SH7764 || \ + CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 + config NR_ONCHIP_DMA_CHANNELS int depends on SH_DMA - default "6" if CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721 - default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R - default "12" if CPU_SUBTYPE_SH7780 - default "4" + default "4" if CPU_SUBTYPE_SH7750 || CPU_SUBTYPE_SH7751 || \ + CPU_SUBTYPE_SH7750S || CPU_SUBTYPE_SH7091 + default "8" if CPU_SUBTYPE_SH7750R || CPU_SUBTYPE_SH7751R || \ + CPU_SUBTYPE_SH7760 + default "12" if CPU_SUBTYPE_SH7723 || CPU_SUBTYPE_SH7780 || \ + CPU_SUBTYPE_SH7785 + default "6" help This allows you to specify the number of channels that the on-chip - DMAC supports. This will be 4 for SH7750/SH7751 and 8 for the + DMAC supports. This will be 4 for SH7091/SH7750/SH7751 and 8 for the SH7750R/SH7751R. config NR_DMA_CHANNELS_BOOL @@ -46,4 +58,28 @@ config SH_DMABRG of the SH7760. Say Y if you want to use Audio/USB DMA on your SH7760 board. +config PVR2_DMA + tristate "PowerVR 2 DMAC support" + depends on SH_DREAMCAST && SH_DMA + help + Selecting this will enable support for the PVR2 DMA controller. + As this chains off of the on-chip DMAC, that must also be + enabled by default. + + This is primarily used by the pvr2fb framebuffer driver for + certain optimizations, but is not necessary for functionality. + + If in doubt, say N. + +config G2_DMA + tristate "G2 Bus DMA support" + depends on SH_DREAMCAST + select SH_DMA_API + help + This enables support for the DMA controller for the Dreamcast's + G2 bus. Drivers that want this will generally enable this on + their own. + + If in doubt, say N. + endmenu diff --git a/arch/sh/drivers/dma/Makefile b/arch/sh/drivers/dma/Makefile index ab956adacb4..c6068137b46 100644 --- a/arch/sh/drivers/dma/Makefile +++ b/arch/sh/drivers/dma/Makefile @@ -4,5 +4,6 @@ obj-$(CONFIG_SH_DMA_API) += dma-api.o dma-sysfs.o obj-$(CONFIG_SH_DMA) += dma-sh.o -obj-$(CONFIG_SH_DREAMCAST) += dma-pvr2.o dma-g2.o +obj-$(CONFIG_PVR2_DMA) += dma-pvr2.o +obj-$(CONFIG_G2_DMA) += dma-g2.o obj-$(CONFIG_SH_DMABRG) += dmabrg.o diff --git a/arch/sh/drivers/dma/dma-sh.c b/arch/sh/drivers/dma/dma-sh.c index 50887a592dd..37fb5b8bbc3 100644 --- a/arch/sh/drivers/dma/dma-sh.c +++ b/arch/sh/drivers/dma/dma-sh.c @@ -17,28 +17,16 @@ #include <mach-dreamcast/mach/dma.h> #include <asm/dma.h> #include <asm/io.h> -#include "dma-sh.h" - -static int dmte_irq_map[] = { - DMTE0_IRQ, - DMTE1_IRQ, - DMTE2_IRQ, - DMTE3_IRQ, -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) - DMTE4_IRQ, - DMTE5_IRQ, -#endif -#if defined(CONFIG_CPU_SUBTYPE_SH7751R) || \ - defined(CONFIG_CPU_SUBTYPE_SH7760) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) - DMTE6_IRQ, - DMTE7_IRQ, +#include <asm/dma-sh.h> + +#if defined(DMAE1_IRQ) +#define NR_DMAE 2 +#else +#define NR_DMAE 1 #endif + +static const char *dmae_name[] = { + "DMAC Address Error0", "DMAC Address Error1" }; static inline unsigned int get_dmte_irq(unsigned int chan) @@ -46,7 +34,14 @@ static inline unsigned int get_dmte_irq(unsigned int chan) unsigned int irq = 0; if (chan < ARRAY_SIZE(dmte_irq_map)) irq = dmte_irq_map[chan]; + +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + if (irq > DMTE6_IRQ) + return DMTE6_IRQ; + return DMTE0_IRQ; +#else return irq; +#endif } /* @@ -59,7 +54,7 @@ static inline unsigned int get_dmte_irq(unsigned int chan) */ static inline unsigned int calc_xmit_shift(struct dma_channel *chan) { - u32 chcr = ctrl_inl(CHCR[chan->chan]); + u32 chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); return ts_shift[(chcr & CHCR_TS_MASK)>>CHCR_TS_SHIFT]; } @@ -75,13 +70,13 @@ static irqreturn_t dma_tei(int irq, void *dev_id) struct dma_channel *chan = dev_id; u32 chcr; - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); if (!(chcr & CHCR_TE)) return IRQ_NONE; chcr &= ~(CHCR_IE | CHCR_DE); - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); wake_up(&chan->wait_queue); @@ -94,7 +89,12 @@ static int sh_dmac_request_dma(struct dma_channel *chan) return 0; return request_irq(get_dmte_irq(chan->chan), dma_tei, - IRQF_DISABLED, chan->dev_id, chan); +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + IRQF_SHARED, +#else + IRQF_DISABLED, +#endif + chan->dev_id, chan); } static void sh_dmac_free_dma(struct dma_channel *chan) @@ -115,7 +115,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr) chan->flags &= ~DMA_TEI_CAPABLE; } - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); chan->flags |= DMA_CONFIGURED; return 0; @@ -126,13 +126,13 @@ static void sh_dmac_enable_dma(struct dma_channel *chan) int irq; u32 chcr; - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); chcr |= CHCR_DE; if (chan->flags & DMA_TEI_CAPABLE) chcr |= CHCR_IE; - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); if (chan->flags & DMA_TEI_CAPABLE) { irq = get_dmte_irq(chan->chan); @@ -150,9 +150,9 @@ static void sh_dmac_disable_dma(struct dma_channel *chan) disable_irq(irq); } - chcr = ctrl_inl(CHCR[chan->chan]); + chcr = ctrl_inl(dma_base_addr[chan->chan] + CHCR); chcr &= ~(CHCR_DE | CHCR_TE | CHCR_IE); - ctrl_outl(chcr, CHCR[chan->chan]); + ctrl_outl(chcr, (dma_base_addr[chan->chan] + CHCR)); } static int sh_dmac_xfer_dma(struct dma_channel *chan) @@ -183,12 +183,13 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) */ if (chan->sar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->sar, SAR[chan->chan]); + ctrl_outl(chan->sar, (dma_base_addr[chan->chan]+SAR)); if (chan->dar || (mach_is_dreamcast() && chan->chan == PVR2_CASCADE_CHAN)) - ctrl_outl(chan->dar, DAR[chan->chan]); + ctrl_outl(chan->dar, (dma_base_addr[chan->chan] + DAR)); - ctrl_outl(chan->count >> calc_xmit_shift(chan), DMATCR[chan->chan]); + ctrl_outl(chan->count >> calc_xmit_shift(chan), + (dma_base_addr[chan->chan] + TCR)); sh_dmac_enable_dma(chan); @@ -197,36 +198,26 @@ static int sh_dmac_xfer_dma(struct dma_channel *chan) static int sh_dmac_get_dma_residue(struct dma_channel *chan) { - if (!(ctrl_inl(CHCR[chan->chan]) & CHCR_DE)) + if (!(ctrl_inl(dma_base_addr[chan->chan] + CHCR) & CHCR_DE)) return 0; - return ctrl_inl(DMATCR[chan->chan]) << calc_xmit_shift(chan); + return ctrl_inl(dma_base_addr[chan->chan] + TCR) + << calc_xmit_shift(chan); } -#if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ - defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7780) || \ - defined(CONFIG_CPU_SUBTYPE_SH7709) -#define dmaor_read_reg() ctrl_inw(DMAOR) -#define dmaor_write_reg(data) ctrl_outw(data, DMAOR) -#else -#define dmaor_read_reg() ctrl_inl(DMAOR) -#define dmaor_write_reg(data) ctrl_outl(data, DMAOR) -#endif - -static inline int dmaor_reset(void) +static inline int dmaor_reset(int no) { - unsigned long dmaor = dmaor_read_reg(); + unsigned long dmaor = dmaor_read_reg(no); /* Try to clear the error flags first, incase they are set */ dmaor &= ~(DMAOR_NMIF | DMAOR_AE); - dmaor_write_reg(dmaor); + dmaor_write_reg(no, dmaor); dmaor |= DMAOR_INIT; - dmaor_write_reg(dmaor); + dmaor_write_reg(no, dmaor); /* See if we got an error again */ - if ((dmaor_read_reg() & (DMAOR_AE | DMAOR_NMIF))) { + if ((dmaor_read_reg(no) & (DMAOR_AE | DMAOR_NMIF))) { printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n"); return -EINVAL; } @@ -237,10 +228,33 @@ static inline int dmaor_reset(void) #if defined(CONFIG_CPU_SH4) static irqreturn_t dma_err(int irq, void *dummy) { - dmaor_reset(); +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + int cnt = 0; + switch (irq) { +#if defined(DMTE6_IRQ) && defined(DMAE1_IRQ) + case DMTE6_IRQ: + cnt++; +#endif + case DMTE0_IRQ: + if (dmaor_read_reg(cnt) & (DMAOR_NMIF | DMAOR_AE)) { + disable_irq(irq); + /* DMA multi and error IRQ */ + return IRQ_HANDLED; + } + default: + return IRQ_NONE; + } +#else + dmaor_reset(0); +#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) + dmaor_reset(1); +#endif disable_irq(irq); return IRQ_HANDLED; +#endif } #endif @@ -259,24 +273,59 @@ static struct dma_info sh_dmac_info = { .flags = DMAC_CHANNELS_TEI_CAPABLE, }; +#ifdef CONFIG_CPU_SH4 +static unsigned int get_dma_error_irq(int n) +{ +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + return (n == 0) ? get_dmte_irq(0) : get_dmte_irq(6); +#else + return (n == 0) ? DMAE0_IRQ : +#if defined(DMAE1_IRQ) + DMAE1_IRQ; +#else + -1; +#endif +#endif +} +#endif + static int __init sh_dmac_init(void) { struct dma_info *info = &sh_dmac_info; int i; #ifdef CONFIG_CPU_SH4 - i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); - if (unlikely(i < 0)) - return i; + int n; + + for (n = 0; n < NR_DMAE; n++) { + i = request_irq(get_dma_error_irq(n), dma_err, +#if defined(CONFIG_SH_DMA_IRQ_MULTI) + IRQF_SHARED, +#else + IRQF_DISABLED, #endif + dmae_name[n], (void *)dmae_name[n]); + if (unlikely(i < 0)) { + printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]); + return i; + } + } +#endif /* CONFIG_CPU_SH4 */ /* * Initialize DMAOR, and clean up any error flags that may have * been set. */ - i = dmaor_reset(); + i = dmaor_reset(0); + if (unlikely(i != 0)) + return i; +#if defined(CONFIG_CPU_SUBTYPE_SH7723) || \ + defined(CONFIG_CPU_SUBTYPE_SH7780) || \ + defined(CONFIG_CPU_SUBTYPE_SH7785) + i = dmaor_reset(1); if (unlikely(i != 0)) return i; +#endif return register_dmac(info); } @@ -284,8 +333,12 @@ static int __init sh_dmac_init(void) static void __exit sh_dmac_exit(void) { #ifdef CONFIG_CPU_SH4 - free_irq(DMAE_IRQ, 0); -#endif + int n; + + for (n = 0; n < NR_DMAE; n++) { + free_irq(get_dma_error_irq(n), (void *)dmae_name[n]); + } +#endif /* CONFIG_CPU_SH4 */ unregister_dmac(&sh_dmac_info); } diff --git a/arch/sh/drivers/dma/dma-sh.h b/arch/sh/drivers/dma/dma-sh.h deleted file mode 100644 index 05fecd5428e..00000000000 --- a/arch/sh/drivers/dma/dma-sh.h +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/sh/drivers/dma/dma-sh.h - * - * Copyright (C) 2000 Takashi YOSHII - * Copyright (C) 2003 Paul Mundt - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#ifndef __DMA_SH_H -#define __DMA_SH_H - -#include <cpu/dma.h> - -/* Definitions for the SuperH DMAC */ -#define REQ_L 0x00000000 -#define REQ_E 0x00080000 -#define RACK_H 0x00000000 -#define RACK_L 0x00040000 -#define ACK_R 0x00000000 -#define ACK_W 0x00020000 -#define ACK_H 0x00000000 -#define ACK_L 0x00010000 -#define DM_INC 0x00004000 -#define DM_DEC 0x00008000 -#define SM_INC 0x00001000 -#define SM_DEC 0x00002000 -#define RS_IN 0x00000200 -#define RS_OUT 0x00000300 -#define TS_BLK 0x00000040 -#define TM_BUR 0x00000020 -#define CHCR_DE 0x00000001 -#define CHCR_TE 0x00000002 -#define CHCR_IE 0x00000004 - -/* DMAOR definitions */ -#define DMAOR_AE 0x00000004 -#define DMAOR_NMIF 0x00000002 -#define DMAOR_DME 0x00000001 - -/* - * Define the default configuration for dual address memory-memory transfer. - * The 0x400 value represents auto-request, external->external. - */ -#define RS_DUAL (DM_INC | SM_INC | 0x400 | TS_32) - -#define MAX_DMAC_CHANNELS (CONFIG_NR_ONCHIP_DMA_CHANNELS) - -/* - * Subtypes that have fewer channels than this simply need to change - * CONFIG_NR_ONCHIP_DMA_CHANNELS. Likewise, subtypes with a larger number - * of channels should expand on this. - * - * For most subtypes we can easily figure these values out with some - * basic calculation, unfortunately on other subtypes these are more - * scattered, so we just leave it unrolled for simplicity. - */ -#define SAR ((unsigned long[]){SH_DMAC_BASE + 0x00, SH_DMAC_BASE + 0x10, \ - SH_DMAC_BASE + 0x20, SH_DMAC_BASE + 0x30, \ - SH_DMAC_BASE + 0x50, SH_DMAC_BASE + 0x60}) -#define DAR ((unsigned long[]){SH_DMAC_BASE + 0x04, SH_DMAC_BASE + 0x14, \ - SH_DMAC_BASE + 0x24, SH_DMAC_BASE + 0x34, \ - SH_DMAC_BASE + 0x54, SH_DMAC_BASE + 0x64}) -#define DMATCR ((unsigned long[]){SH_DMAC_BASE + 0x08, SH_DMAC_BASE + 0x18, \ - SH_DMAC_BASE + 0x28, SH_DMAC_BASE + 0x38, \ - SH_DMAC_BASE + 0x58, SH_DMAC_BASE + 0x68}) -#define CHCR ((unsigned long[]){SH_DMAC_BASE + 0x0c, SH_DMAC_BASE + 0x1c, \ - SH_DMAC_BASE + 0x2c, SH_DMAC_BASE + 0x3c, \ - SH_DMAC_BASE + 0x5c, SH_DMAC_BASE + 0x6c}) - -#define DMAOR (SH_DMAC_BASE + 0x40) - -#endif /* __DMA_SH_H */ - diff --git a/arch/sh/drivers/pci/ops-sh7785lcr.c b/arch/sh/drivers/pci/ops-sh7785lcr.c index b3bd6870205..fb0869f0bef 100644 --- a/arch/sh/drivers/pci/ops-sh7785lcr.c +++ b/arch/sh/drivers/pci/ops-sh7785lcr.c @@ -48,13 +48,13 @@ EXPORT_SYMBOL(board_pci_channels); static struct sh4_pci_address_map sh7785_pci_map = { .window0 = { - .base = SH7780_CS2_BASE_ADDR, - .size = 0x04000000, - }, - - .window1 = { - .base = SH7780_CS3_BASE_ADDR, - .size = 0x04000000, +#if defined(CONFIG_32BIT) + .base = SH7780_32BIT_DDR_BASE_ADDR, + .size = 0x40000000, +#else + .base = SH7780_CS0_BASE_ADDR, + .size = 0x20000000, +#endif }, .flags = SH4_PCIC_NO_RESET, diff --git a/arch/sh/drivers/pci/pci-sh7780.c b/arch/sh/drivers/pci/pci-sh7780.c index 078dc44d6b0..bae6a2cf047 100644 --- a/arch/sh/drivers/pci/pci-sh7780.c +++ b/arch/sh/drivers/pci/pci-sh7780.c @@ -120,19 +120,15 @@ int __init sh7780_pcic_init(struct sh4_pci_address_map *map) /* Set IO and Mem windows to local address * Make PCI and local address the same for easy 1 to 1 mapping - * Window0 = map->window0.size @ non-cached area base = SDRAM - * Window1 = map->window1.size @ cached area base = SDRAM */ - word = (CONFIG_MEMORY_SIZE - 0x00100000) | 0x00000001; - pci_write_reg(word, SH4_PCILSR0); - pci_write_reg(0x00000001, SH4_PCILSR1); + pci_write_reg(map->window0.size - 0xfffff, SH4_PCILSR0); + pci_write_reg(map->window1.size - 0xfffff, SH4_PCILSR1); /* Set the values on window 0 PCI config registers */ - word = (CONFIG_MEMORY_SIZE > 0x08000000) ? 0x10000000 : 0x08000000; - pci_write_reg(word | 0xa0000000, SH4_PCILAR0); - pci_write_reg(word, SH7780_PCIMBAR0); + pci_write_reg(map->window0.base, SH4_PCILAR0); + pci_write_reg(map->window0.base, SH7780_PCIMBAR0); /* Set the values on window 1 PCI config registers */ - pci_write_reg(0x00000000, SH4_PCILAR1); - pci_write_reg(0x00000000, SH7780_PCIMBAR1); + pci_write_reg(map->window1.base, SH4_PCILAR1); + pci_write_reg(map->window1.base, SH7780_PCIMBAR1); /* Map IO space into PCI IO window * The IO window is 64K-PCIBIOS_MIN_IO in size diff --git a/arch/sh/drivers/pci/pci-sh7780.h b/arch/sh/drivers/pci/pci-sh7780.h index 97b2c98f05c..93adc7119b7 100644 --- a/arch/sh/drivers/pci/pci-sh7780.h +++ b/arch/sh/drivers/pci/pci-sh7780.h @@ -104,6 +104,8 @@ #define SH7780_CS5_BASE_ADDR (SH7780_CS4_BASE_ADDR + SH7780_MEM_REGION_SIZE) #define SH7780_CS6_BASE_ADDR (SH7780_CS5_BASE_ADDR + SH7780_MEM_REGION_SIZE) +#define SH7780_32BIT_DDR_BASE_ADDR 0x40000000 + struct sh4_pci_address_map; /* arch/sh/drivers/pci/pci-sh7780.c */ diff --git a/arch/sh/drivers/pci/pci.c b/arch/sh/drivers/pci/pci.c index e36c7b87086..0d6ac7a1db4 100644 --- a/arch/sh/drivers/pci/pci.c +++ b/arch/sh/drivers/pci/pci.c @@ -19,6 +19,7 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> +#include <linux/dma-debug.h> #include <asm/io.h> static int __init pcibios_init(void) @@ -43,6 +44,8 @@ static int __init pcibios_init(void) pci_fixup_irqs(pci_common_swizzle, pcibios_map_platform_irq); + dma_debug_add_bus(&pci_bus_type); + return 0; } subsys_initcall(pcibios_init); |