diff options
Diffstat (limited to 'arch/sh/boards')
101 files changed, 5922 insertions, 2236 deletions
diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 2b1af0eefa6..2018c7ea4c9 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -81,13 +81,6 @@ config SH_7343_SOLUTION_ENGINE Select 7343 SolutionEngine if configuring for a Hitachi SH7343 (SH-Mobile 3AS) evaluation board. -config SH_7751_SYSTEMH - bool "SystemH7751R" - depends on CPU_SUBTYPE_SH7751R - help - Select SystemH if you are configuring for a Renesas SystemH - 7751R evaluation board. - config SH_HP6XX bool "HP6XX" select SYS_SUPPORTS_APM_EMULATION @@ -150,17 +143,32 @@ config SH_SDK7780 Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. +config SH_SDK7786 + bool "SDK7786" + depends on CPU_SUBTYPE_SH7786 + select SYS_SUPPORTS_PCI + select NO_IOPORT if !PCI + select ARCH_WANT_OPTIONAL_GPIOLIB + select HAVE_SRAM_POOL + help + Select SDK7786 if configuring for a Renesas Technology Europe + SH7786-65nm board. + config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI select IO_TRAPPED if MMU +config SH_SH7757LCR + bool "SH7757LCR" + depends on CPU_SUBTYPE_SH7757 + select ARCH_REQUIRE_GPIOLIB + config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 select SYS_SUPPORTS_PCI - select IO_TRAPPED if MMU config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" @@ -171,11 +179,19 @@ config SH_SH7785LCR_29BIT_PHYSMAPS DIP switch(S2-5). If you set the DIP switch for S2-5 = ON, you can access all on-board device in 29bit address mode. +config SH_SH7785LCR_PT + bool "SH7785LCR prototype board on 32-bit MMU mode" + depends on SH_SH7785LCR && 32BIT + default n + help + If you use prototype board, this option is enabled. + config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_PCI + select NO_IOPORT if !PCI config SH_MIGOR bool "Migo-R" @@ -193,6 +209,20 @@ config SH_AP325RXA Renesas "AP-325RXA" support. Compatible with ALGO SYSTEM CO.,LTD. "AP-320A" +config SH_KFR2R09 + bool "KFR2R09" + depends on CPU_SUBTYPE_SH7724 + select ARCH_REQUIRE_GPIOLIB + help + "Kit For R2R for 2009" support. + +config SH_ECOVEC + bool "EcoVec" + depends on CPU_SUBTYPE_SH7724 + select ARCH_REQUIRE_GPIOLIB + help + Renesas "R0P7724LC0011/21RL (EcoVec)" support. + config SH_SH7763RDP bool "SH7763RDP" depends on CPU_SUBTYPE_SH7763 @@ -258,6 +288,7 @@ config SH_LBOX_RE2 config SH_X3PROTO bool "SH-X3 Prototype board" depends on CPU_SUBTYPE_SHX3 + select NO_IOPORT if !PCI config SH_MAGIC_PANEL_R2 bool "Magic Panel R2" @@ -278,6 +309,17 @@ config SH_POLARIS help Select if configuring for an SMSC Polaris development board +config SH_SH2007 + bool "SH-2007 board" + select NO_IOPORT + depends on CPU_SUBTYPE_SH7780 + help + SH-2007 is a single-board computer based around SH7780 chip + intended for embedded applications. + It has an Ethernet interface (SMC9118), direct connected + Compact Flash socket, two serial ports and PC-104 bus. + More information at <http://sh2000.sh-linux.org>. + endmenu source "arch/sh/boards/mach-r2d/Kconfig" diff --git a/arch/sh/boards/Makefile b/arch/sh/boards/Makefile index 7baa2109023..be7d11d04b2 100644 --- a/arch/sh/boards/Makefile +++ b/arch/sh/boards/Makefile @@ -1,11 +1,15 @@ # # Specific board support, not covered by a mach group. # -obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o +obj-$(CONFIG_SH_SECUREEDGE5410) += board-secureedge5410.o +obj-$(CONFIG_SH_SH2007) += board-sh2007.o obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o obj-$(CONFIG_SH_URQUELL) += board-urquell.o obj-$(CONFIG_SH_SHMIN) += board-shmin.o +obj-$(CONFIG_SH_EDOSK7705) += board-edosk7705.o obj-$(CONFIG_SH_EDOSK7760) += board-edosk7760.o obj-$(CONFIG_SH_ESPT) += board-espt.o obj-$(CONFIG_SH_POLARIS) += board-polaris.o +obj-$(CONFIG_SH_TITAN) += board-titan.o +obj-$(CONFIG_SH_SH7757LCR) += board-sh7757lcr.o diff --git a/arch/sh/boards/board-edosk7705.c b/arch/sh/boards/board-edosk7705.c new file mode 100644 index 00000000000..4cb3bb74c36 --- /dev/null +++ b/arch/sh/boards/board-edosk7705.c @@ -0,0 +1,78 @@ +/* + * arch/sh/boards/renesas/edosk7705/setup.c + * + * Copyright (C) 2000 Kazumoto Kojima + * + * Hitachi SolutionEngine Support. + * + * Modified for edosk7705 development + * board by S. Dunn, 2003. + */ +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/smc91x.h> +#include <asm/machvec.h> +#include <asm/sizes.h> + +#define SMC_IOBASE 0xA2000000 +#define SMC_IO_OFFSET 0x300 +#define SMC_IOADDR (SMC_IOBASE + SMC_IO_OFFSET) + +#define ETHERNET_IRQ 0x09 + +static void __init sh_edosk7705_init_irq(void) +{ + make_imask_irq(ETHERNET_IRQ); +} + +/* eth initialization functions */ +static struct smc91x_platdata smc91x_info = { + .flags = SMC91X_USE_16BIT | SMC91X_IO_SHIFT_1 | IORESOURCE_IRQ_LOWLEVEL, +}; + +static struct resource smc91x_res[] = { + [0] = { + .start = SMC_IOADDR, + .end = SMC_IOADDR + SZ_32 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ETHERNET_IRQ, + .end = ETHERNET_IRQ, + .flags = IORESOURCE_IRQ , + } +}; + +static struct platform_device smc91x_dev = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_res), + .resource = smc91x_res, + + .dev = { + .platform_data = &smc91x_info, + }, +}; + +/* platform init code */ +static struct platform_device *edosk7705_devices[] __initdata = { + &smc91x_dev, +}; + +static int __init init_edosk7705_devices(void) +{ + return platform_add_devices(edosk7705_devices, + ARRAY_SIZE(edosk7705_devices)); +} +__initcall(init_edosk7705_devices); + +/* + * The Machine Vector + */ +static struct sh_machine_vector mv_edosk7705 __initmv = { + .mv_name = "EDOSK7705", + .mv_nr_irqs = 80, + .mv_init_irq = sh_edosk7705_init_irq, +}; diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 0a37c8bfc95..efba450a051 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -23,7 +23,7 @@ #include <asm/heartbeat.h> #include <cpu/sh7720.h> -#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL) +#define LAN9115_READY (__raw_readl(0xA8000084UL) & 0x00000001UL) /* Prefer cmdline over RedBoot */ static const char *probes[] = { "cmdlinepart", "RedBoot", NULL }; @@ -60,33 +60,33 @@ static void __init setup_chip_select(void) { /* CS2: LAN (0x08000000 - 0x0bffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x36db0400, CS2BCR); + __raw_writel(0x36db0400, CS2BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x000003c0, CS2WCR); + __raw_writel(0x000003c0, CS2WCR); /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS4BCR); + __raw_writel(0x00000200, CS4BCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS4WCR); + __raw_writel(0x00100981, CS4WCR); /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5ABCR); + __raw_writel(0x00000200, CS5ABCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5AWCR); + __raw_writel(0x00100981, CS5AWCR); /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS5BBCR); + __raw_writel(0x00000200, CS5BBCR); /* (SW:1.5 WR:3 HW:1.5), ext. wait */ - ctrl_outl(0x00100981, CS5BWCR); + __raw_writel(0x00100981, CS5BWCR); /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */ /* no idle cycles, normal space, 8 bit data bus */ - ctrl_outl(0x00000200, CS6ABCR); + __raw_writel(0x00000200, CS6ABCR); /* (SW:1.5 WR:3 HW:1.5), no ext. wait */ - ctrl_outl(0x001009C1, CS6AWCR); + __raw_writel(0x001009C1, CS6AWCR); } static void __init setup_port_multiplexing(void) @@ -94,71 +94,71 @@ static void __init setup_port_multiplexing(void) /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5); * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1); */ - ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1); * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0); */ - ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ + __raw_writew(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4); * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0; */ - ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */ + __raw_writew(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 |