diff options
Diffstat (limited to 'arch/sh/boards/superh/microdev/setup.c')
| -rw-r--r-- | arch/sh/boards/superh/microdev/setup.c | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/arch/sh/boards/superh/microdev/setup.c b/arch/sh/boards/superh/microdev/setup.c new file mode 100644 index 00000000000..c18919941ec --- /dev/null +++ b/arch/sh/boards/superh/microdev/setup.c @@ -0,0 +1,278 @@ +/* + * arch/sh/boards/superh/microdev/setup.c + * + * Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com) + * Copyright (C) 2003, 2004 SuperH, Inc. + * Copyright (C) 2004 Paul Mundt + * + * SuperH SH4-202 MicroDev board support. + * + * May be copied or modified under the terms of the GNU General Public + * License. See linux/COPYING for more information. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/ioport.h> +#include <asm/io.h> +#include <asm/mach/irq.h> +#include <asm/mach/io.h> +#include <asm/machvec.h> +#include <asm/machvec_init.h> + +extern void microdev_heartbeat(void); + +/* + * The Machine Vector + */ + +struct sh_machine_vector mv_sh4202_microdev __initmv = { + .mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */ + + .mv_inb = microdev_inb, + .mv_inw = microdev_inw, + .mv_inl = microdev_inl, + .mv_outb = microdev_outb, + .mv_outw = microdev_outw, + .mv_outl = microdev_outl, + + .mv_inb_p = microdev_inb_p, + .mv_inw_p = microdev_inw_p, + .mv_inl_p = microdev_inl_p, + .mv_outb_p = microdev_outb_p, + .mv_outw_p = microdev_outw_p, + .mv_outl_p = microdev_outl_p, + + .mv_insb = microdev_insb, + .mv_insw = microdev_insw, + .mv_insl = microdev_insl, + .mv_outsb = microdev_outsb, + .mv_outsw = microdev_outsw, + .mv_outsl = microdev_outsl, + + .mv_isa_port2addr = microdev_isa_port2addr, + + .mv_init_irq = init_microdev_irq, + +#ifdef CONFIG_HEARTBEAT + .mv_heartbeat = microdev_heartbeat, +#endif +}; +ALIAS_MV(sh4202_microdev) + +/****************************************************************************/ + + + /* + * Setup for the SMSC FDC37C93xAPM + */ +#define SMSC_CONFIG_PORT_ADDR (0x3F0) +#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR +#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1) + +#define SMSC_ENTER_CONFIG_KEY 0x55 +#define SMSC_EXIT_CONFIG_KEY 0xaa + +#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */ +#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */ +#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */ +#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */ +#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */ +#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */ +#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */ +#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */ +#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */ +#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */ + +#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */ +#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */ +#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */ +#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */ +#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */ +#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */ +#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */ + +#define SMSC_READ_INDEXED(index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + inb(SMSC_DATA_PORT_ADDR); }) +#define SMSC_WRITE_INDEXED(val, index) ({ \ + outb((index), SMSC_INDEX_PORT_ADDR); \ + outb((val), SMSC_DATA_PORT_ADDR); }) + +#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */ +#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */ +#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */ +#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */ + +#define SERIAL1_PRIMARY_BASE 0x03f8 +#define SERIAL2_PRIMARY_BASE 0x02f8 + +#define MSB(x) ( (x) >> 8 ) +#define LSB(x) ( (x) & 0xff ) + + /* General-Purpose base address on CPU-board FPGA */ +#define MICRODEV_FPGA_GP_BASE 0xa6100000ul + + /* assume a Keyboard Controller is present */ +int microdev_kbd_controller_present = 1; + +const char *get_system_type(void) +{ + return "SH4-202 MicroDev"; +} + +static struct resource smc91x_resources[] = { + [0] = { + .start = 0x300, + .end = 0x300 + 0x0001000 - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = MICRODEV_LINUX_IRQ_ETHERNET, + .end = MICRODEV_LINUX_IRQ_ETHERNET, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static int __init smc91x_setup(void) +{ + return platform_device_register(&smc91x_device); +} + +__initcall(smc91x_setup); + + /* + * Initialize the board + */ +void __init platform_setup(void) +{ + int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul); + const int fpgaRevision = *fpgaRevisionRegister; + int * const CacheControlRegister = (int*)CCR; + + printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n", + get_system_type(), fpgaRevision, *CacheControlRegister); +} + + +/****************************************************************************/ + + + /* + * Setup for the SMSC FDC37C93xAPM + */ +static int __init smsc_superio_setup(void) +{ + + unsigned char devid, devrev; + + /* Initially the chip is in run state */ + /* Put it into configuration state */ + outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + /* Read device ID info */ + devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX); + devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX); + if ( (devid==0x30) && (devrev==0x01) ) + { + printk("SMSC FDC37C93xAPM SuperIO device detected\n"); + } + else + { /* not the device identity we expected */ + printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n", + devid, devrev); + /* inform the keyboard driver that we have no keyboard controller */ + microdev_kbd_controller_present = 0; + /* little point in doing anything else in this functon */ + return 0; + } + + /* Select the keyboard device */ + SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX); + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX); + + /* Select the Serial #1 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX); + + /* Select the Serial #2 device */ + SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX); + /* enable the interrupts */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#1 device */ + SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX); + SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX); + + /* Select the IDE#2 device */ + SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX); + /* enable it */ + SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX); + /* program with port addresses */ + SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1); + SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0); + SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1); + /* select the interrupt */ + SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX); + + /* Select the configuration registers */ + SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX); + /* enable the appropriate GPIO pins for IDE functionality: + * bit[0] In/Out 1==input; 0==output + * bit[1] Polarity 1==invert; 0==no invert + * bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable + * bit[3:4] Function Select 00==original; 01==Alternate Function #1 + */ + SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */ + SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ + SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ + SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ + SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */ + + /* Exit the configuraton state */ + outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); + + return 0; +} + + +/* This is grotty, but, because kernel is always referenced on the link line + * before any devices, this is safe. + */ +__initcall(smsc_superio_setup); |