diff options
Diffstat (limited to 'arch/sh/boards/mach-se/7724/setup.c')
-rw-r--r-- | arch/sh/boards/mach-se/7724/setup.c | 157 |
1 files changed, 149 insertions, 8 deletions
diff --git a/arch/sh/boards/mach-se/7724/setup.c b/arch/sh/boards/mach-se/7724/setup.c index 9cd04bd558b..15456a0773b 100644 --- a/arch/sh/boards/mach-se/7724/setup.c +++ b/arch/sh/boards/mach-se/7724/setup.c @@ -19,10 +19,13 @@ #include <linux/smc91x.h> #include <linux/gpio.h> #include <linux/input.h> +#include <linux/usb/r8a66597.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <asm/io.h> #include <asm/heartbeat.h> +#include <asm/sh_eth.h> +#include <asm/clock.h> #include <asm/sh_keysc.h> #include <cpu/sh7724.h> #include <mach-se/mach/se7724.h> @@ -235,7 +238,7 @@ static struct platform_device ceu1_device = { }, }; -/* KEYSC */ +/* KEYSC in SoC (Needs SW33-2 set to ON) */ static struct sh_keysc_info keysc_info = { .mode = SH_KEYSC_MODE_1, .scan_timing = 10, @@ -252,12 +255,13 @@ static struct sh_keysc_info keysc_info = { static struct resource keysc_resources[] = { [0] = { - .start = 0x1a204000, - .end = 0x1a20400f, + .name = "KEYSC", + .start = 0x044b0000, + .end = 0x044b000f, .flags = IORESOURCE_MEM, }, [1] = { - .start = IRQ0_KEY, + .start = 79, .flags = IORESOURCE_IRQ, }, }; @@ -272,6 +276,62 @@ static struct platform_device keysc_device = { }, }; +/* SH Eth */ +static struct resource sh_eth_resources[] = { + [0] = { + .start = SH_ETH_ADDR, + .end = SH_ETH_ADDR + 0x1FC, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 91, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +struct sh_eth_plat_data sh_eth_plat = { + .phy = 0x1f, /* SMSC LAN8187 */ + .edmac_endian = EDMAC_LITTLE_ENDIAN, +}; + +static struct platform_device sh_eth_device = { + .name = "sh-eth", + .id = 0, + .dev = { + .platform_data = &sh_eth_plat, + }, + .num_resources = ARRAY_SIZE(sh_eth_resources), + .resource = sh_eth_resources, +}; + +static struct r8a66597_platdata sh7724_usb0_host_data = { +}; + +static struct resource sh7724_usb0_host_resources[] = { + [0] = { + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, + }, +}; + +static struct platform_device sh7724_usb0_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + .platform_data = &sh7724_usb0_host_data, + }, + .num_resources = ARRAY_SIZE(sh7724_usb0_host_resources), + .resource = sh7724_usb0_host_resources, +}; + static struct platform_device *ms7724se_devices[] __initdata = { &heartbeat_device, &smc91x_eth_device, @@ -280,11 +340,62 @@ static struct platform_device *ms7724se_devices[] __initdata = { &ceu0_device, &ceu1_device, &keysc_device, + &sh_eth_device, + &sh7724_usb0_host_device, }; +#define EEPROM_OP 0xBA206000 +#define EEPROM_ADR 0xBA206004 +#define EEPROM_DATA 0xBA20600C +#define EEPROM_STAT 0xBA206010 +#define EEPROM_STRT 0xBA206014 +static int __init sh_eth_is_eeprom_ready(void) +{ + int t = 10000; + + while (t--) { + if (!ctrl_inw(EEPROM_STAT)) + return 1; + cpu_relax(); + } + + printk(KERN_ERR "ms7724se can not access to eeprom\n"); + return 0; +} + +static void __init sh_eth_init(void) +{ + int i; + u16 mac[3]; + + /* check EEPROM status */ + if (!sh_eth_is_eeprom_ready()) + return; + + /* read MAC addr from EEPROM */ + for (i = 0 ; i < 3 ; i++) { + ctrl_outw(0x0, EEPROM_OP); /* read */ + ctrl_outw(i*2, EEPROM_ADR); + ctrl_outw(0x1, EEPROM_STRT); + if (!sh_eth_is_eeprom_ready()) + return; + + mac[i] = ctrl_inw(EEPROM_DATA); + mac[i] = ((mac[i] & 0xFF) << 8) | (mac[i] >> 8); /* swap */ + } + + /* reset sh-eth */ + ctrl_outl(0x1, SH_ETH_ADDR + 0x0); + + /* set MAC addr */ + ctrl_outl(((mac[0] << 16) | (mac[1])), SH_ETH_MAHR); + ctrl_outl((mac[2]), SH_ETH_MALR); +} + #define SW4140 0xBA201000 #define FPGA_OUT 0xBA200400 #define PORT_HIZA 0xA4050158 +#define PORT_MSELCRB 0xA4050182 #define SW41_A 0x0100 #define SW41_B 0x0200 @@ -294,6 +405,7 @@ static struct platform_device *ms7724se_devices[] __initdata = { #define SW41_F 0x2000 #define SW41_G 0x4000 #define SW41_H 0x8000 + static int __init devices_setup(void) { u16 sw = ctrl_inw(SW4140); /* select camera, monitor */ @@ -302,9 +414,16 @@ static int __init devices_setup(void) ctrl_outw(ctrl_inw(FPGA_OUT) & ~((1 << 1) | /* LAN */ (1 << 6) | /* VIDEO DAC */ - (1 << 12)), /* USB0 */ + (1 << 12) | /* USB0 */ + (1 << 14)), /* RMII */ FPGA_OUT); + /* turn on USB clocks, use external clock */ + ctrl_outw((ctrl_inw(PORT_MSELCRB) & ~0xc000) | 0x8000, PORT_MSELCRB); + + /* enable USB0 port */ + ctrl_outw(0x0600, 0xa40501d4); + /* enable IRQ 0,1,2 */ gpio_request(GPIO_FN_INTC_IRQ0, NULL); gpio_request(GPIO_FN_INTC_IRQ1, NULL); @@ -374,7 +493,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO0_CLK, NULL); gpio_request(GPIO_FN_VIO0_FLD, NULL); gpio_request(GPIO_FN_VIO0_HD, NULL); - platform_resource_setup_memory(&ceu0_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu0_device, "ceu0", 4 << 20); /* enable CEU1 */ gpio_request(GPIO_FN_VIO1_D7, NULL); @@ -389,7 +508,7 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_VIO1_HD, NULL); gpio_request(GPIO_FN_VIO1_VD, NULL); gpio_request(GPIO_FN_VIO1_CLK, NULL); - platform_resource_setup_memory(&ceu1_device, "ceu", 4 << 20); + platform_resource_setup_memory(&ceu1_device, "ceu1", 4 << 20); /* KEYSC */ gpio_request(GPIO_FN_KEYOUT5_IN5, NULL); @@ -404,6 +523,28 @@ static int __init devices_setup(void) gpio_request(GPIO_FN_KEYOUT1, NULL); gpio_request(GPIO_FN_KEYOUT0, NULL); + /* + * enable SH-Eth + * + * please remove J33 pin from your board !! + * + * ms7724 board should not use GPIO_FN_LNKSTA pin + * So, This time PTX5 is set to input pin + */ + gpio_request(GPIO_FN_RMII_RXD0, NULL); + gpio_request(GPIO_FN_RMII_RXD1, NULL); + gpio_request(GPIO_FN_RMII_TXD0, NULL); + gpio_request(GPIO_FN_RMII_TXD1, NULL); + gpio_request(GPIO_FN_RMII_REF_CLK, NULL); + gpio_request(GPIO_FN_RMII_TX_EN, NULL); + gpio_request(GPIO_FN_RMII_RX_ER, NULL); + gpio_request(GPIO_FN_RMII_CRS_DV, NULL); + gpio_request(GPIO_FN_MDIO, NULL); + gpio_request(GPIO_FN_MDC, NULL); + gpio_request(GPIO_PTX5, NULL); + gpio_direction_input(GPIO_PTX5); + sh_eth_init(); + if (sw & SW41_B) { /* SVGA */ lcdc_info.ch[0].lcd_cfg.xres = 800; @@ -437,7 +578,7 @@ static int __init devices_setup(void) } return platform_add_devices(ms7724se_devices, - ARRAY_SIZE(ms7724se_devices)); + ARRAY_SIZE(ms7724se_devices)); } device_initcall(devices_setup); |