diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
-rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 197 |
1 files changed, 143 insertions, 54 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 3b1ceb46fa5..826e62326d5 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -20,12 +20,14 @@ #include <linux/i2c.h> #include <linux/i2c/tsc2007.h> #include <linux/input.h> +#include <linux/input/sh_keysc.h> +#include <linux/mfd/sh_mobile_sdhi.h> #include <video/sh_mobile_lcdc.h> #include <media/sh_mobile_ceu.h> #include <asm/heartbeat.h> #include <asm/sh_eth.h> -#include <asm/sh_keysc.h> #include <asm/clock.h> +#include <asm/suspend.h> #include <cpu/sh7724.h> /* @@ -147,6 +149,9 @@ static struct platform_device sh_eth_device = { }, .num_resources = ARRAY_SIZE(sh_eth_resources), .resource = sh_eth_resources, + .archdata = { + .hwblk_id = HWBLK_ETHER, + }, }; /* USB0 host */ @@ -185,30 +190,18 @@ static struct platform_device usb0_host_device = { .resource = usb0_host_resources, }; -/* - * USB1 - * - * CN5 can use both host/function, - * and we can determine it by checking PTB[3] - * - * This time only USB1 host is supported. - */ +/* USB1 host/function */ void usb1_port_power(int port, int power) { - if (!gpio_get_value(GPIO_PTB3)) { - printk(KERN_ERR "USB1 function is not supported\n"); - return; - } - gpio_set_value(GPIO_PTB5, power); } -static struct r8a66597_platdata usb1_host_data = { +static struct r8a66597_platdata usb1_common_data = { .on_chip = 1, .port_power = usb1_port_power, }; -static struct resource usb1_host_resources[] = { +static struct resource usb1_common_resources[] = { [0] = { .start = 0xa4d90000, .end = 0xa4d90124 - 1, @@ -221,16 +214,16 @@ static struct resource usb1_host_resources[] = { }, }; -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", +static struct platform_device usb1_common_device = { + /* .name will be added in arch_setup */ .id = 1, .dev = { .dma_mask = NULL, /* not use dma */ .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, + .platform_data = &usb1_common_data, }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, + .num_resources = ARRAY_SIZE(usb1_common_resources), + .resource = usb1_common_resources, }; /* LCDC */ @@ -428,16 +421,90 @@ static struct i2c_board_info ts_i2c_clients = { .irq = IRQ0, }; +/* SHDI0 */ +static void sdhi0_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PTB6, state); +} + +static struct sh_mobile_sdhi_info sdhi0_info = { + .set_pwr = sdhi0_set_pwr, +}; + +static struct resource sdhi0_resources[] = { + [0] = { + .name = "SDHI0", + .start = 0x04ce0000, + .end = 0x04ce01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 101, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi0_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi0_resources), + .resource = sdhi0_resources, + .id = 0, + .dev = { + .platform_data = &sdhi0_info, + }, + .archdata = { + .hwblk_id = HWBLK_SDHI0, + }, +}; + +/* SHDI1 */ +static void sdhi1_set_pwr(struct platform_device *pdev, int state) +{ + gpio_set_value(GPIO_PTB7, state); +} + +static struct sh_mobile_sdhi_info sdhi1_info = { + .set_pwr = sdhi1_set_pwr, +}; + +static struct resource sdhi1_resources[] = { + [0] = { + .name = "SDHI1", + .start = 0x04cf0000, + .end = 0x04cf01ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 24, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdhi1_device = { + .name = "sh_mobile_sdhi", + .num_resources = ARRAY_SIZE(sdhi1_resources), + .resource = sdhi1_resources, + .id = 1, + .dev = { + .platform_data = &sdhi1_info, + }, + .archdata = { + .hwblk_id = HWBLK_SDHI1, + }, +}; + static struct platform_device *ecovec_devices[] __initdata = { &heartbeat_device, &nor_flash_device, &sh_eth_device, &usb0_host_device, - &usb1_host_device, /* USB1 host support */ + &usb1_common_device, &lcdc_device, &ceu0_device, &ceu1_device, &keysc_device, + &sdhi0_device, + &sdhi1_device, }; #define EEPROM_ADDR 0x50 @@ -466,12 +533,9 @@ static u8 mac_read(struct i2c_adapter *a, u8 command) return buf; } -#define MAC_LEN 6 -static void __init sh_eth_init(void) +static void __init sh_eth_init(struct sh_eth_plat_data *pd) { struct i2c_adapter *a = i2c_get_adapter(1); - struct clk *eth_clk; - u8 mac[MAC_LEN]; int i; if (!a) { @@ -479,39 +543,30 @@ static void __init sh_eth_init(void) return; } - eth_clk = clk_get(NULL, "eth0"); - if (!eth_clk) { - pr_err("can not get eth0 clk\n"); - return; - } - /* read MAC address frome EEPROM */ - for (i = 0; i < MAC_LEN; i++) { - mac[i] = mac_read(a, 0x10 + i); + for (i = 0; i < sizeof(pd->mac_addr); i++) { + pd->mac_addr[i] = mac_read(a, 0x10 + i); msleep(10); } - - /* clock enable */ - clk_enable(eth_clk); - - /* reset sh-eth */ - ctrl_outl(0x1, SH_ETH_ADDR + 0x0); - - /* set MAC addr */ - ctrl_outl((mac[0] << 24) | - (mac[1] << 16) | - (mac[2] << 8) | - (mac[3] << 0), SH_ETH_MAHR); - ctrl_outl((mac[4] << 8) | - (mac[5] << 0), SH_ETH_MALR); - - clk_put(eth_clk); } #define PORT_HIZA 0xA4050158 #define IODRIVEA 0xA405018A + +extern char ecovec24_sdram_enter_start; +extern char ecovec24_sdram_enter_end; +extern char ecovec24_sdram_leave_start; +extern char ecovec24_sdram_leave_end; + static int __init arch_setup(void) { + /* register board specific self-refresh code */ + sh_mobile_register_self_refresh(SUSP_SH_STANDBY | SUSP_SH_SF, + &ecovec24_sdram_enter_start, + &ecovec24_sdram_enter_end, + &ecovec24_sdram_leave_start, + &ecovec24_sdram_leave_end); + /* enable STATUS0, STATUS2 and PDSTATUS */ gpio_request(GPIO_FN_STATUS0, NULL); gpio_request(GPIO_FN_STATUS2, NULL); @@ -561,6 +616,14 @@ static int __init arch_setup(void) ctrl_outw(0x0600, 0xa40501d4); ctrl_outw(0x0600, 0xa4050192); + if (gpio_get_value(GPIO_PTB3)) { + printk(KERN_INFO "USB1 function is selected\n"); + usb1_common_device.name = "r8a66597_udc"; + } else { + printk(KERN_INFO "USB1 host is selected\n"); + usb1_common_device.name = "r8a66597_hcd"; + } + /* enable LCDC */ gpio_request(GPIO_FN_LCDD23, NULL); gpio_request(GPIO_FN_LCDD22, NULL); @@ -603,8 +666,8 @@ static int __init arch_setup(void) gpio_direction_output(GPIO_PTR1, 0); gpio_direction_output(GPIO_PTA2, 0); - /* I/O buffer drive ability is low */ - ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0040 , IODRIVEA); + /* I/O buffer drive ability is high */ + ctrl_outw((ctrl_inw(IODRIVEA) & ~0x00c0) | 0x0080 , IODRIVEA); if (gpio_get_value(GPIO_PTE6)) { /* DVI */ @@ -710,6 +773,33 @@ static int __init arch_setup(void) gpio_direction_input(GPIO_PTR5); gpio_direction_input(GPIO_PTR6); + /* enable SDHI0 (needs DS2.4 set to ON) */ + gpio_request(GPIO_FN_SDHI0CD, NULL); + gpio_request(GPIO_FN_SDHI0WP, NULL); + gpio_request(GPIO_FN_SDHI0CMD, NULL); + gpio_request(GPIO_FN_SDHI0CLK, NULL); + gpio_request(GPIO_FN_SDHI0D3, NULL); + gpio_request(GPIO_FN_SDHI0D2, NULL); + gpio_request(GPIO_FN_SDHI0D1, NULL); + gpio_request(GPIO_FN_SDHI0D0, NULL); + gpio_request(GPIO_PTB6, NULL); + gpio_direction_output(GPIO_PTB6, 0); + + /* enable SDHI1 (needs DS2.6,7 set to ON,OFF) */ + gpio_request(GPIO_FN_SDHI1CD, NULL); + gpio_request(GPIO_FN_SDHI1WP, NULL); + gpio_request(GPIO_FN_SDHI1CMD, NULL); + gpio_request(GPIO_FN_SDHI1CLK, NULL); + gpio_request(GPIO_FN_SDHI1D3, NULL); + gpio_request(GPIO_FN_SDHI1D2, NULL); + gpio_request(GPIO_FN_SDHI1D1, NULL); + gpio_request(GPIO_FN_SDHI1D0, NULL); + gpio_request(GPIO_PTB7, NULL); + gpio_direction_output(GPIO_PTB7, 0); + + /* I/O buffer drive ability is high for SDHI1 */ + ctrl_outw((ctrl_inw(IODRIVEA) & ~0x3000) | 0x2000 , IODRIVEA); + /* enable I2C device */ i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices)); @@ -721,12 +811,11 @@ arch_initcall(arch_setup); static int __init devices_setup(void) { - sh_eth_init(); + sh_eth_init(&sh_eth_plat); return 0; } device_initcall(devices_setup); - static struct sh_machine_vector mv_ecovec __initmv = { .mv_name = "R0P7724 (EcoVec)", }; |