aboutsummaryrefslogtreecommitdiff
path: root/arch/ppc/syslib/harrier.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ppc/syslib/harrier.c')
-rw-r--r--arch/ppc/syslib/harrier.c302
1 files changed, 302 insertions, 0 deletions
diff --git a/arch/ppc/syslib/harrier.c b/arch/ppc/syslib/harrier.c
new file mode 100644
index 00000000000..a6b3f864579
--- /dev/null
+++ b/arch/ppc/syslib/harrier.c
@@ -0,0 +1,302 @@
+/*
+ * arch/ppc/syslib/harrier.c
+ *
+ * Motorola MCG Harrier northbridge/memory controller support
+ *
+ * Author: Dale Farnsworth
+ * dale.farnsworth@mvista.com
+ *
+ * 2001 (c) MontaVista, Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/harrier_defs.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/pci-bridge.h>
+#include <asm/open_pic.h>
+#include <asm/harrier.h>
+
+/* define defaults for inbound windows */
+#define HARRIER_ITAT_DEFAULT (HARRIER_ITAT_ENA | \
+ HARRIER_ITAT_MEM | \
+ HARRIER_ITAT_WPE | \
+ HARRIER_ITAT_GBL)
+
+#define HARRIER_MPAT_DEFAULT (HARRIER_ITAT_ENA | \
+ HARRIER_ITAT_MEM | \
+ HARRIER_ITAT_WPE | \
+ HARRIER_ITAT_GBL)
+
+/*
+ * Initialize the inbound window size on a non-monarch harrier.
+ */
+void __init harrier_setup_nonmonarch(uint ppc_reg_base, uint in0_size)
+{
+ u16 temps;
+ u32 temp;
+
+ if (in0_size > HARRIER_ITSZ_2GB) {
+ printk
+ ("harrier_setup_nonmonarch: Invalid window size code %d\n",
+ in0_size);
+ return;
+ }
+
+ /* Clear the PCI memory enable bit. If we don't, then when the
+ * inbound windows are enabled below, the corresponding BARs will be
+ * "live" and start answering to PCI memory reads from their default
+ * addresses (0x0), which overlap with system RAM.
+ */
+ temps = in_le16((u16 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(PCI_COMMAND)));
+ temps &= ~(PCI_COMMAND_MEMORY);
+ out_le16((u16 *) (ppc_reg_base + HARRIER_XCSR_CONFIG(PCI_COMMAND)),
+ temps);
+
+ /* Setup a non-prefetchable inbound window */
+ out_le32((u32 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(HARRIER_ITSZ0_OFF)), in0_size);
+
+ temp = in_le32((u32 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)));
+ temp &= ~HARRIER_ITAT_PRE;
+ temp |= HARRIER_ITAT_DEFAULT;
+ out_le32((u32 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(HARRIER_ITAT0_OFF)), temp);
+
+ /* Enable the message passing block */
+ temp = in_le32((u32 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)));
+ temp |= HARRIER_MPAT_DEFAULT;
+ out_le32((u32 *) (ppc_reg_base +
+ HARRIER_XCSR_CONFIG(HARRIER_MPAT_OFF)), temp);
+}
+
+void __init harrier_release_eready(uint ppc_reg_base)
+{
+ ulong temp;
+
+ /*
+ * Set EREADY to allow the line to be pulled up after everyone is
+ * ready.
+ */
+ temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
+ temp |= HARRIER_EREADY;
+ out_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF), temp);
+}
+
+void __init harrier_wait_eready(uint ppc_reg_base)
+{
+ ulong temp;
+
+ /*
+ * Poll the ERDYS line until it goes high to indicate that all
+ * non-monarch PrPMCs are ready for bus enumeration (or that there are
+ * no PrPMCs present).
+ */
+
+ /* FIXME: Add a timeout of some kind to prevent endless waits. */
+ do {
+
+ temp = in_be32((uint *) (ppc_reg_base + HARRIER_MISC_CSR_OFF));
+
+ } while (!(temp & HARRIER_ERDYS));
+}
+
+/*
+ * Initialize the Motorola MCG Harrier host bridge.
+ *
+ * This means setting up the PPC bus to PCI memory and I/O space mappings,
+ * setting the PCI memory space address of the MPIC (mapped straight
+ * through), and ioremap'ing the mpic registers.
+ * 'OpenPIC_Addr' will be set correctly by this routine.
+ * This routine will not change the PCI_CONFIG_ADDR or PCI_CONFIG_DATA
+ * addresses and assumes that the mapping of PCI memory space back to system
+ * memory is set up correctly by PPCBug.
+ */
+int __init
+harrier_init(struct pci_controller *hose,
+ uint ppc_reg_base,
+ ulong processor_pci_mem_start,
+ ulong processor_pci_mem_end,
+ ulong processor_pci_io_start,
+ ulong processor_pci_io_end, ulong processor_mpic_base)
+{
+ uint addr, offset;
+
+ /*
+ * Some sanity checks...
+ */
+ if (((processor_pci_mem_start & 0xffff0000) != processor_pci_mem_start)
+ || ((processor_pci_io_start & 0xffff0000) !=
+ processor_pci_io_start)) {
+ printk("harrier_init: %s\n",
+ "PPC to PCI mappings must start on 64 KB boundaries");
+ return -1;
+ }
+
+ if (((processor_pci_mem_end & 0x0000ffff) != 0x0000ffff) ||
+ ((processor_pci_io_end & 0x0000ffff) != 0x0000ffff)) {
+ printk("harrier_init: PPC to PCI mappings %s\n",
+ "must end just before a 64 KB boundaries");
+ return -1;
+ }
+
+ if (((processor_pci_mem_end - processor_pci_mem_start) !=
+ (hose->mem_space.end - hose->mem_space.start)) ||
+ ((processor_pci_io_end - processor_pci_io_start) !=
+ (hose->io_space.end - hose->io_space.start))) {
+ printk("harrier_init: %s\n",
+ "PPC and PCI memory or I/O space sizes don't match");
+ return -1;
+ }
+
+ if ((processor_mpic_base & 0xfffc0000) != processor_mpic_base) {
+ printk("harrier_init: %s\n",
+ "MPIC address must start on 256 KB boundary");
+ return -1;
+ }
+
+ if ((pci_dram_offset & 0xffff0000) != pci_dram_offset) {
+ printk("harrier_init: %s\n",
+ "pci_dram_offset must be multiple of 64 KB");
+ return -1;
+ }
+
+ /*
+ * Program the OTAD/OTOF registers to set up the PCI Mem & I/O
+ * space mappings. These are the mappings going from the processor to
+ * the PCI bus.
+ *
+ * Note: Don't need to 'AND' start/end addresses with 0xffff0000
+ * because sanity check above ensures that they are properly
+ * aligned.
+ */
+
+ /* Set up PPC->PCI Mem mapping */
+ addr = processor_pci_mem_start | (processor_pci_mem_end >> 16);
+#ifdef CONFIG_HARRIER_STORE_GATHERING
+ offset = (hose->mem_space.start - processor_pci_mem_start) | 0x9a;
+#else
+ offset = (hose->mem_space.start - processor_pci_mem_start) | 0x92;
+#endif
+ out_be32((uint *) (ppc_reg_base + HARRIER_OTAD0_OFF), addr);
+ out_be32((uint *) (ppc_reg_base + HARRIER_OTOF0_OFF), offset);
+
+ /* Set up PPC->PCI I/O mapping -- Contiguous I/O space */
+ addr = processor_pci_io_start | (processor_pci_io_end >> 16);
+ offset = (hose->io_space.start - processor_pci_io_start) | 0x80;
+ out_be32((uint *) (ppc_reg_base + HARRIER_OTAD1_OFF), addr);
+ out_be32((uint *) (ppc_reg_base + HARRIER_OTOF1_OFF), offset);
+
+ /* Enable MPIC */
+ OpenPIC_Addr = (void *)processor_mpic_base;
+ addr = (processor_mpic_base >> 16) | 1;
+ out_be16((ushort *) (ppc_reg_base + HARRIER_MBAR_OFF), addr);
+ out_8((u_char *) (ppc_reg_base + HARRIER_MPIC_CSR_OFF),
+ HARRIER_MPIC_OPI_ENABLE);
+
+ return 0;
+}
+
+/*
+ * Find the amount of RAM present.
+ * This assumes that PPCBug has initialized the memory controller (SMC)
+ * on the Harrier correctly (i.e., it does no sanity checking).
+ * It also assumes that the memory base registers are set to configure the
+ * memory as contigous starting with "RAM A BASE", "RAM B BASE", etc.
+ * however, RAM base registers can be skipped (e.g. A, B, C are set,
+ * D is skipped but E is set is okay).
+ */
+#define MB (1024*1024UL)
+
+static uint harrier_size_table[] __initdata = {
+ 0 * MB, /* 0 ==> 0 MB */
+ 32 * MB, /* 1 ==> 32 MB */
+ 64 * MB, /* 2 ==> 64 MB */
+ 64 * MB, /* 3 ==> 64 MB */
+ 128 * MB, /* 4 ==> 128 MB */
+ 128 * MB, /* 5 ==> 128 MB */
+ 128 * MB, /* 6 ==> 128 MB */
+ 256 * MB, /* 7 ==> 256 MB */
+ 256 * MB, /* 8 ==> 256 MB */
+ 256 * MB, /* 9 ==> 256 MB */
+ 512 * MB, /* a ==> 512 MB */
+ 512 * MB, /* b ==> 512 MB */
+ 512 * MB, /* c ==> 512 MB */
+ 1024 * MB, /* d ==> 1024 MB */
+ 1024 * MB, /* e ==> 1024 MB */
+ 2048 * MB, /* f ==> 2048 MB */
+};
+
+/*
+ * *** WARNING: You MUST have a BAT set up to map in the XCSR regs ***
+ *
+ * Read the memory controller's registers to determine the amount of system
+ * memory. Assumes that the memory controller registers are already mapped
+ * into virtual memory--too early to use ioremap().
+ */
+unsigned long __init harrier_get_mem_size(uint xcsr_base)
+{
+ ulong last_addr;
+ int i;
+ uint vend_dev_id;
+ uint *size_table;
+ uint val;
+ uint *csrp;
+ uint size;
+ int size_table_entries;
+
+ vend_dev_id = in_be32((uint *) xcsr_base + PCI_VENDOR_ID);
+
+ if (((vend_dev_id & 0xffff0000) >> 16) != PCI_VENDOR_ID_MOTOROLA) {
+ printk("harrier_get_mem_size: %s (0x%x)\n",
+ "Not a Motorola Memory Controller", vend_dev_id);
+ return 0;
+ }
+
+ vend_dev_id &= 0x0000ffff;
+
+ if (vend_dev_id == PCI_DEVICE_ID_MOTOROLA_HARRIER) {
+ size_table = harrier_size_table;
+ size_table_entries = sizeof(harrier_size_table) /
+ sizeof(harrier_size_table[0]);
+ } else {
+ printk("harrier_get_mem_size: %s (0x%x)\n",
+ "Not a Harrier", vend_dev_id);
+ return 0;
+ }
+
+ last_addr = 0;
+
+ csrp = (uint *) (xcsr_base + HARRIER_SDBA_OFF);
+ for (i = 0; i < 8; i++) {
+ val = in_be32(csrp++);
+
+ if (val & 0x100) { /* If enabled */
+ size = val >> HARRIER_SDB_SIZE_SHIFT;
+ size &= HARRIER_SDB_SIZE_MASK;
+ if (size >= size_table_entries) {
+ break; /* Register not set correctly */
+ }
+ size = size_table[size];
+
+ val &= ~(size - 1);
+ val += size;
+
+ if (val > last_addr) {
+ last_addr = val;
+ }
+ }
+ }
+
+ return last_addr;
+}
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-12-16 09:46:27 +0000