diff options
Diffstat (limited to 'arch/ppc/platforms/pplus.c')
| -rw-r--r-- | arch/ppc/platforms/pplus.c | 917 |
1 files changed, 917 insertions, 0 deletions
diff --git a/arch/ppc/platforms/pplus.c b/arch/ppc/platforms/pplus.c new file mode 100644 index 00000000000..65705c91179 --- /dev/null +++ b/arch/ppc/platforms/pplus.c @@ -0,0 +1,917 @@ +/* + * arch/ppc/platforms/pplus.c + * + * Board and PCI setup routines for MCG PowerPlus + * + * Author: Randy Vinson <rvinson@mvista.com> + * + * Derived from original PowerPlus PReP work by + * Cort Dougan, Johnnie Peters, Matt Porter, and + * Troy Benjegerdes. + * + * 2001-2004 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/console.h> +#include <linux/pci.h> +#include <linux/irq.h> +#include <linux/ide.h> +#include <linux/seq_file.h> +#include <linux/root_dev.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/dma.h> +#include <asm/machdep.h> +#include <asm/prep_nvram.h> +#include <asm/vga.h> +#include <asm/i8259.h> +#include <asm/open_pic.h> +#include <asm/hawk.h> +#include <asm/todc.h> +#include <asm/bootinfo.h> +#include <asm/kgdb.h> +#include <asm/reg.h> + +#include "pplus.h" + +#undef DUMP_DBATS + +TODC_ALLOC(); + +extern void pplus_setup_hose(void); +extern void pplus_set_VIA_IDE_native(void); + +extern unsigned long loops_per_jiffy; +unsigned char *Motherboard_map_name; + +/* Tables for known hardware */ + +/* Motorola Mesquite */ +static inline int +mesquite_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * MPIC interrupts for various IDSEL values (MPIC IRQ0 = + * Linux IRQ16 (to leave room for ISA IRQs at 0-15). + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ + { 0, 0, 0, 0}, /* IDSEL 15 - unused */ + {19, 19, 19, 19}, /* IDSEL 16 - PMC Slot 1 */ + { 0, 0, 0, 0}, /* IDSEL 17 - unused */ + { 0, 0, 0, 0}, /* IDSEL 18 - unused */ + { 0, 0, 0, 0}, /* IDSEL 19 - unused */ + {24, 25, 26, 27}, /* IDSEL 20 - P2P bridge (to cPCI 1) */ + { 0, 0, 0, 0}, /* IDSEL 21 - unused */ + {28, 29, 30, 31} /* IDSEL 22 - P2P bridge (to cPCI 2) */ + }; + + const long min_idsel = 14, max_idsel = 22, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +/* Motorola Sitka */ +static inline int +sitka_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * MPIC interrupts for various IDSEL values (MPIC IRQ0 = + * Linux IRQ16 (to leave room for ISA IRQs at 0-15). + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {18, 0, 0, 0}, /* IDSEL 14 - Enet 0 */ + { 0, 0, 0, 0}, /* IDSEL 15 - unused */ + {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ + {28, 25, 26, 27}, /* IDSEL 17 - PMC Slot 2 */ + { 0, 0, 0, 0}, /* IDSEL 18 - unused */ + { 0, 0, 0, 0}, /* IDSEL 19 - unused */ + {20, 0, 0, 0} /* IDSEL 20 - P2P bridge (to cPCI) */ + }; + + const long min_idsel = 14, max_idsel = 20, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +/* Motorola MTX */ +static inline int +MTX_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * MPIC interrupts for various IDSEL values (MPIC IRQ0 = + * Linux IRQ16 (to leave room for ISA IRQs at 0-15). + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ + { 0, 0, 0, 0}, /* IDSEL 13 - unused */ + {18, 0, 0, 0}, /* IDSEL 14 - Enet */ + { 0, 0, 0, 0}, /* IDSEL 15 - unused */ + {25, 26, 27, 28}, /* IDSEL 16 - PMC Slot 1 */ + {26, 27, 28, 25}, /* IDSEL 17 - PMC Slot 2 */ + {27, 28, 25, 26} /* IDSEL 18 - PCI Slot 3 */ + }; + + const long min_idsel = 12, max_idsel = 18, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +/* Motorola MTX Plus */ +/* Secondary bus interrupt routing is not supported yet */ +static inline int +MTXplus_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + static char pci_irq_table[][4] = + /* + * MPIC interrupts for various IDSEL values (MPIC IRQ0 = + * Linux IRQ16 (to leave room for ISA IRQs at 0-15). + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ + { 0, 0, 0, 0}, /* IDSEL 13 - unused */ + {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ + { 0, 0, 0, 0}, /* IDSEL 15 - unused */ + {25, 26, 27, 28}, /* IDSEL 16 - PCI Slot 1P */ + {26, 27, 28, 25}, /* IDSEL 17 - PCI Slot 2P */ + {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ + {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ + { 0, 0, 0, 0} /* IDSEL 20 - P2P Bridge */ + }; + + const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +static inline int +Genesis2_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + /* 2600 + * Raven 31 + * ISA 11 + * SCSI 12 - IRQ3 + * Univ 13 + * eth 14 - IRQ2 + * VGA 15 - IRQ4 + * PMC1 16 - IRQ9,10,11,12 = PMC1 A-D + * PMC2 17 - IRQ12,9,10,11 = A-D + * SCSI2 18 - IRQ11 + * eth2 19 - IRQ10 + * PCIX 20 - IRQ9,10,11,12 = PCI A-D + */ + + /* 2400 + * Hawk 31 + * ISA 11 + * Univ 13 + * eth 14 - IRQ2 + * PMC1 16 - IRQ9,10,11,12 = PMC A-D + * PMC2 17 - IRQ12,9,10,11 = PMC A-D + * PCIX 20 - IRQ9,10,11,12 = PMC A-D + */ + + /* 2300 + * Raven 31 + * ISA 11 + * Univ 13 + * eth 14 - IRQ2 + * PMC1 16 - 9,10,11,12 = A-D + * PMC2 17 - 9,10,11,12 = B,C,D,A + */ + + static char pci_irq_table[][4] = + /* + * MPIC interrupts for various IDSEL values (MPIC IRQ0 = + * Linux IRQ16 (to leave room for ISA IRQs at 0-15). + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + { + {19, 0, 0, 0}, /* IDSEL 12 - SCSI */ + { 0, 0, 0, 0}, /* IDSEL 13 - Universe PCI - VME */ + {18, 0, 0, 0}, /* IDSEL 14 - Enet 1 */ + { 0, 0, 0, 0}, /* IDSEL 15 - unused */ + {25, 26, 27, 28}, /* IDSEL 16 - PCI/PMC Slot 1P */ + {28, 25, 26, 27}, /* IDSEL 17 - PCI/PMC Slot 2P */ + {27, 28, 25, 26}, /* IDSEL 18 - PCI Slot 3P */ + {26, 0, 0, 0}, /* IDSEL 19 - Enet 2 */ + {25, 26, 27, 28} /* IDSEL 20 - P2P Bridge */ + }; + + const long min_idsel = 12, max_idsel = 20, irqs_per_slot = 4; + return PCI_IRQ_TABLE_LOOKUP; +} + +#define MOTOROLA_CPUTYPE_REG 0x800 +#define MOTOROLA_BASETYPE_REG 0x803 +#define MPIC_RAVEN_ID 0x48010000 +#define MPIC_HAWK_ID 0x48030000 +#define MOT_PROC2_BIT 0x800 + +static u_char pplus_openpic_initsenses[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* MVME2600_INT_SIO */ + (IRQ_SENSE_EDGE | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_FALCN_ECC_ERR */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_ETHERNET */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_SCSI */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),/*MVME2600_INT_PCI_GRAPHICS */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_VME3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTA */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTB */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTC */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_PCI_INTD */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* MVME2600_INT_LM_SIG1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), +}; + +int mot_entry = -1; +int prep_keybd_present = 1; +int mot_multi = 0; + +struct brd_info { + /* 0x100 mask assumes for Raven and Hawk boards that the level/edge + * are set */ + int cpu_type; + /* 0x200 if this board has a Hawk chip. */ + int base_type; + /* or'ed with 0x80 if this board should be checked for multi CPU */ + int max_cpu; + const char *name; + int (*map_irq) (struct pci_dev *, unsigned char, unsigned char); +}; +struct brd_info mot_info[] = { + {0x300, 0x00, 0x00, "MVME 2400", Genesis2_map_irq}, + {0x1E0, 0xE0, 0x00, "Mesquite cPCI (MCP750)", mesquite_map_irq}, + {0x1E0, 0xE1, 0x00, "Sitka cPCI (MCPN750)", sitka_map_irq}, + {0x1E0, 0xE2, 0x00, "Mesquite cPCI (MCP750) w/ HAC", mesquite_map_irq}, + {0x1E0, 0xF6, 0x80, "MTX Plus", MTXplus_map_irq}, + {0x1E0, 0xF6, 0x81, "Dual MTX Plus", MTXplus_map_irq}, + {0x1E0, 0xF7, 0x80, "MTX wo/ Parallel Port", MTX_map_irq}, + {0x1E0, 0xF7, 0x81, "Dual MTX wo/ Parallel Port", MTX_map_irq}, + {0x1E0, 0xF8, 0x80, "MTX w/ Parallel Port", MTX_map_irq}, + {0x1E0, 0xF8, 0x81, "Dual MTX w/ Parallel Port", MTX_map_irq}, + {0x1E0, 0xF9, 0x00, "MVME 2300", Genesis2_map_irq}, + {0x1E0, 0xFA, 0x00, "MVME 2300SC/2600", Genesis2_map_irq}, + {0x1E0, 0xFB, 0x00, "MVME 2600 with MVME712M", Genesis2_map_irq}, + {0x1E0, 0xFC, 0x00, "MVME 2600/2700 with MVME761", Genesis2_map_irq}, + {0x1E0, 0xFD, 0x80, "MVME 3600 with MVME712M", Genesis2_map_irq}, + {0x1E0, 0xFD, 0x81, "MVME 4600 with MVME712M", Genesis2_map_irq}, + {0x1E0, 0xFE, 0x80, "MVME 3600 with MVME761", Genesis2_map_irq}, + {0x1E0, 0xFE, 0x81, "MVME 4600 with MVME761", Genesis2_map_irq}, + {0x000, 0x00, 0x00, "", NULL} +}; + +void __init pplus_set_board_type(void) +{ + unsigned char cpu_type; + unsigned char base_mod; + int entry; + unsigned short devid; + unsigned long *ProcInfo = NULL; + + cpu_type = inb(MOTOROLA_CPUTYPE_REG) & 0xF0; + base_mod = inb(MOTOROLA_BASETYPE_REG); + early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); + + for (entry = 0; mot_info[entry].cpu_type != 0; entry++) { + /* Check for Hawk chip */ + if (mot_info[entry].cpu_type & 0x200) { + if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) + continue; + } else { + /* store the system config register for later use. */ + ProcInfo = + (unsigned long *)ioremap(PPLUS_SYS_CONFIG_REG, 4); + + /* Check non hawk boards */ + if ((mot_info[entry].cpu_type & 0xff) != cpu_type) + continue; + + if (mot_info[entry].base_type == 0) { + mot_entry = entry; + break; + } + + if (mot_info[entry].base_type != base_mod) + continue; + } + + if (!(mot_info[entry].max_cpu & 0x80)) { + mot_entry = entry; + break; + } + + /* processor 1 not present and max processor zero indicated */ + if ((*ProcInfo & MOT_PROC2_BIT) + && !(mot_info[entry].max_cpu & 0x7f)) { + mot_entry = entry; + break; + } + + /* processor 1 present and max processor zero indicated */ + if (!(*ProcInfo & MOT_PROC2_BIT) + && (mot_info[entry].max_cpu & 0x7f)) { + mot_entry = entry; + break; + } + + /* Indicate to system if this is a multiprocessor board */ + if (!(*ProcInfo & MOT_PROC2_BIT)) + mot_multi = 1; + } + + if (mot_entry == -1) + /* No particular cpu type found - assume Mesquite (MCP750) */ + mot_entry = 1; + + Motherboard_map_name = (unsigned char *)mot_info[mot_entry].name; + ppc_md.pci_map_irq = mot_info[mot_entry].map_irq; +} +void __init pplus_pib_init(void) +{ + unsigned char reg; + unsigned short short_reg; + + struct pci_dev *dev = NULL; + + /* + * Perform specific configuration for the Via Tech or + * or Winbond PCI-ISA-Bridge part. + */ + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_1, dev))) { + /* + * PPCBUG does not set the enable bits + * for the IDE device. Force them on here. + */ + pci_read_config_byte(dev, 0x40, ®); + + reg |= 0x03; /* IDE: Chip Enable Bits */ + pci_write_config_byte(dev, 0x40, reg); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_VIA, + PCI_DEVICE_ID_VIA_82C586_2, + dev)) && (dev->devfn = 0x5a)) { + /* Force correct USB interrupt */ + dev->irq = 11; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, + PCI_DEVICE_ID_WINBOND_83C553, dev))) { + /* Clear PCI Interrupt Routing Control Register. */ + short_reg = 0x0000; + pci_write_config_word(dev, 0x44, short_reg); + /* Route IDE interrupts to IRQ 14 */ + reg = 0xEE; + pci_write_config_byte(dev, 0x43, reg); + } + + if ((dev = pci_get_device(PCI_VENDOR_ID_WINBOND, + PCI_DEVICE_ID_WINBOND_82C105, dev))) { + /* + * Disable LEGIRQ mode so PCI INTS are routed + * directly to the 8259 and enable both channels + */ + pci_write_config_dword(dev, 0x40, 0x10ff0033); + + /* Force correct IDE interrupt */ + dev->irq = 14; + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + } + pci_dev_put(dev); +} + +void __init pplus_set_VIA_IDE_legacy(void) +{ + unsigned short vend, dev; + + early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); + early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); + + if ((vend == PCI_VENDOR_ID_VIA) && + (dev == PCI_DEVICE_ID_VIA_82C586_1)) { + unsigned char temp; + + /* put back original "standard" port base addresses */ + early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), + PCI_BASE_ADDRESS_0, 0x1f1); + early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), + PCI_BASE_ADDRESS_1, 0x3f5); + early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), + PCI_BASE_ADDRESS_2, 0x171); + early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), + PCI_BASE_ADDRESS_3, 0x375); + early_write_config_dword(0, 0, PCI_DEVFN(0xb, 1), + PCI_BASE_ADDRESS_4, 0xcc01); + + /* put into legacy mode */ + early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, + &temp); + temp &= ~0x05; + early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, + temp); + } +} + +void pplus_set_VIA_IDE_native(void) +{ + unsigned short vend, dev; + + early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_VENDOR_ID, &vend); + early_read_config_word(0, 0, PCI_DEVFN(0xb, 1), PCI_DEVICE_ID, &dev); + + if ((vend == PCI_VENDOR_ID_VIA) && + (dev == PCI_DEVICE_ID_VIA_82C586_1)) { + unsigned char temp; + + /* put into native mode */ + early_read_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, + &temp); + temp |= 0x05; + early_write_config_byte(0, 0, PCI_DEVFN(0xb, 1), PCI_CLASS_PROG, + temp); + } +} + +void __init pplus_pcibios_fixup(void) +{ + + unsigned char reg; + unsigned short devid; + unsigned char base_mod; + + printk(KERN_INFO "Setting PCI interrupts for a \"%s\"\n", + Motherboard_map_name); + + /* Setup the Winbond or Via PIB */ + pplus_pib_init(); + + /* Set up floppy in PS/2 mode */ + outb(0x09, SIO_CONFIG_RA); + reg = inb(SIO_CONFIG_RD); + reg = (reg & 0x3F) | 0x40; + outb(reg, SIO_CONFIG_RD); + outb(reg, SIO_CONFIG_RD); /* Have to write twice to change! */ + + /* This is a hack. If this is a 2300 or 2400 mot board then there is + * no keyboard controller and we have to indicate that. + */ + + early_read_config_word(0, 0, 0, PCI_VENDOR_ID, &devid); + base_mod = inb(MOTOROLA_BASETYPE_REG); + if ((devid == PCI_DEVICE_ID_MOTOROLA_HAWK) || + (base_mod == 0xF9) || (base_mod == 0xFA) || (base_mod == 0xE1)) + prep_keybd_present = 0; +} + +void __init pplus_find_bridges(void) +{ + struct pci_controller *hose; + + hose = pcibios_alloc_controller(); + if (!hose) + return; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + hose->pci_mem_offset = PREP_ISA_MEM_BASE; + hose->io_base_virt = (void *)PREP_ISA_IO_BASE; + + pci_init_resource(&hose->io_resource, PPLUS_PCI_IO_START, + PPLUS_PCI_IO_END, IORESOURCE_IO, "PCI host bridge"); + pci_init_resource(&hose->mem_resources[0], PPLUS_PROC_PCI_MEM_START, + PPLUS_PROC_PCI_MEM_END, IORESOURCE_MEM, + "PCI host bridge"); + + hose->io_space.start = PPLUS_PCI_IO_START; + hose->io_space.end = PPLUS_PCI_IO_END; + hose->mem_space.start = PPLUS_PCI_MEM_START; + hose->mem_space.end = PPLUS_PCI_MEM_END - HAWK_MPIC_SIZE; + + if (hawk_init(hose, PPLUS_HAWK_PPC_REG_BASE, PPLUS_PROC_PCI_MEM_START, + PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE, + PPLUS_PROC_PCI_IO_START, PPLUS_PROC_PCI_IO_END, + PPLUS_PROC_PCI_MEM_END - HAWK_MPIC_SIZE + 1) + != 0) { + printk(KERN_CRIT "Could not initialize host bridge\n"); + + } + + pplus_set_VIA_IDE_legacy(); + + hose->last_busno = pciauto_bus_scan(hose, hose->first_busno); + + ppc_md.pcibios_fixup = pplus_pcibios_fixup; + ppc_md.pci_swizzle = common_swizzle; +} + +static int pplus_show_cpuinfo(struct seq_file *m) +{ + seq_printf(m, "vendor\t\t: Motorola MCG\n"); + seq_printf(m, "machine\t\t: %s\n", Motherboard_map_name); + + return 0; +} + +static void __init pplus_setup_arch(void) +{ + struct pci_controller *hose; + + if (ppc_md.progress) + ppc_md.progress("pplus_setup_arch: enter", 0); + + /* init to some ~sane value until calibrate_delay() runs */ + loops_per_jiffy = 50000000; + + if (ppc_md.progress) + ppc_md.progress("pplus_setup_arch: find_bridges", 0); + + /* Setup PCI host bridge */ + pplus_find_bridges(); + + hose = pci_bus_to_hose(0); + isa_io_base = (ulong) hose->io_base_virt; + + if (ppc_md.progress) + ppc_md.progress("pplus_setup_arch: set_board_type", 0); + + pplus_set_board_type(); + + /* Enable L2. Assume we don't need to flush -- Cort */ + *(unsigned char *)(PPLUS_L2_CONTROL_REG) |= 3; + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_SDA2; +#endif + + printk(KERN_INFO "Motorola PowerPlus Platform\n"); + printk(KERN_INFO + "Port by MontaVista Software, Inc. (source@mvista.com)\n"); + +#ifdef CONFIG_VGA_CONSOLE + /* remap the VGA memory */ + vgacon_remap_base = (unsigned long)ioremap(PPLUS_ISA_MEM_BASE, + 0x08000000); + conswitchp = &vga_con; +#endif +#ifdef CONFIG_PPCBUG_NVRAM + /* Read in NVRAM data */ + init_prep_nvram(); + + /* if no bootargs, look in NVRAM */ + if (cmd_line[0] == '\0') { + char *bootargs; + bootargs = prep_nvram_get_var("bootargs"); + if (bootargs != NULL) { + strcpy(cmd_line, bootargs); + /* again.. */ + strcpy(saved_command_line, cmd_line); + } + } +#endif + if (ppc_md.progress) + ppc_md.progress("pplus_setup_arch: exit", 0); +} + +static void pplus_restart(char *cmd) +{ + unsigned long i = 10000; + + local_irq_disable(); + + /* set VIA IDE controller into native mode */ + pplus_set_VIA_IDE_native(); + + /* set exception prefix high - to the prom */ + _nmask_and_or_msr(0, MSR_IP); + + /* make sure bit 0 (reset) is a 0 */ + outb(inb(0x92) & ~1L, 0x92); + /* signal a reset to system control port A - soft reset */ + outb(inb(0x92) | 1, 0x92); + + while (i != 0) + i++; + panic("restart failed\n"); +} + +static void pplus_halt(void) +{ + /* set exception prefix high - to the prom */ + _nmask_and_or_msr(MSR_EE, MSR_IP); + + /* make sure bit 0 (reset) is a 0 */ + outb(inb(0x92) & ~1L, 0x92); + /* signal a reset to system control port A - soft reset */ + outb(inb(0x92) | 1, 0x92); + + while (1) ; + /* + * Not reached + */ +} + +static void pplus_power_off(void) +{ + pplus_halt(); +} + +static unsigned int pplus_irq_canonicalize(u_int irq) +{ + if (irq == 2) + return 9; + else + return irq; +} + +static void __init pplus_init_IRQ(void) +{ + int i; + + if (ppc_md.progress) + ppc_md.progress("init_irq: enter", 0); + + OpenPIC_InitSenses = pplus_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof(pplus_openpic_initsenses); + + if (OpenPIC_Addr != NULL) { + + openpic_set_sources(0, 16, OpenPIC_Addr + 0x10000); + openpic_init(NUM_8259_INTERRUPTS); + openpic_hookup_cascade(NUM_8259_INTERRUPTS, "82c59 cascade", + i8259_irq); + ppc_md.get_irq = openpic_get_irq; + } + + for (i = 0; i < NUM_8259_INTERRUPTS; i++) + irq_desc[i].handler = &i8259_pic; + + i8259_init(0); + + if (ppc_md.progress) + ppc_md.progress("init_irq: exit", 0); +} + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) +/* + * IDE stuff. + */ +static int pplus_ide_default_irq(unsigned long base) +{ + switch (base) { + case 0x1f0: + return 14; + case 0x170: + return 15; + default: + return 0; + } +} + +static unsigned long pplus_ide_default_io_base(int index) +{ + switch (index) { + case 0: + return 0x1f0; + case 1: + return 0x170; + default: + return 0; + } +} + +static void __init +pplus_ide_init_hwif_ports(hw_regs_t * hw, unsigned long data_port, + unsigned long ctrl_port, int *irq) +{ + unsigned long reg = data_port; + int i; + + for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) { + hw->io_ports[i] = reg; + reg += 1; + } + + if (ctrl_port) + hw->io_ports[IDE_CONTROL_OFFSET] = ctrl_port; + else + hw->io_ports[IDE_CONTROL_OFFSET] = + hw->io_ports[IDE_DATA_OFFSET] + 0x206; + + if (irq != NULL) + *irq = pplus_ide_default_irq(data_port); +} +#endif + +#ifdef CONFIG_SMP +/* PowerPlus (MTX) support */ +static int __init smp_pplus_probe(void) +{ + extern int mot_multi; + + if (mot_multi) { + openpic_request_IPIs(); + smp_hw_index[1] = 1; + return 2; + } + + return 1; +} + +static void __init smp_pplus_kick_cpu(int nr) +{ + *(unsigned long *)KERNELBASE = nr; + asm volatile ("dcbf 0,%0"::"r" (KERNELBASE):"memory"); + printk(KERN_INFO "CPU1 reset, waiting\n"); +} + +static void __init smp_pplus_setup_cpu(int cpu_nr) +{ + if (OpenPIC_Addr) + do_openpic_setup_cpu(); +} + +static struct smp_ops_t pplus_smp_ops = { + smp_openpic_message_pass, + smp_pplus_probe, + smp_pplus_kick_cpu, + smp_pplus_setup_cpu, + .give_timebase = smp_generic_give_timebase, + .take_timebase = smp_generic_take_timebase, +}; +#endif /* CONFIG_SMP */ + +#ifdef DUMP_DBATS +static void print_dbat(int idx, u32 bat) +{ + + char str[64]; + + sprintf(str, "DBAT%c%c = 0x%08x\n", + (char)((idx - DBAT0U) / 2) + '0', (idx & 1) ? 'L' : 'U', bat); + ppc_md.progress(str, 0); +} + +#define DUMP_DBAT(x) \ + do { \ + u32 __temp = mfspr(x);\ + print_dbat(x, __temp); \ + } while (0) + +static void dump_dbats(void) +{ + if (ppc_md.progress) { + DUMP_DBAT(DBAT0U); + DUMP_DBAT(DBAT0L); + DUMP_DBAT(DBAT1U); + DUMP_DBAT(DBAT1L); + DUMP_DBAT(DBAT2U); + DUMP_DBAT(DBAT2L); + DUMP_DBAT(DBAT3U); + DUMP_DBAT(DBAT3L); + } +} +#endif + +static unsigned long __init pplus_find_end_of_memory(void) +{ + unsigned long total; + + if (ppc_md.progress) + ppc_md.progress("pplus_find_end_of_memory", 0); + +#ifdef DUMP_DBATS + dump_dbats(); +#endif + + total = hawk_get_mem_size(PPLUS_HAWK_SMC_BASE); + return (total); +} + +static void __init pplus_map_io(void) +{ + io_block_mapping(PPLUS_ISA_IO_BASE, PPLUS_ISA_IO_BASE, 0x10000000, + _PAGE_IO); + io_block_mapping(0xfef80000, 0xfef80000, 0x00080000, _PAGE_IO); +} + +static void __init pplus_init2(void) +{ +#ifdef CONFIG_NVRAM + request_region(PREP_NVRAM_AS0, 0x8, "nvram"); +#endif + request_region(0x20, 0x20, "pic1"); + request_region(0xa0, 0x20, "pic2"); + request_region(0x00, 0x20, "dma1"); + request_region(0x40, 0x20, "timer"); + request_region(0x80, 0x10, "dma page reg"); + request_region(0xc0, 0x20, "dma2"); +} + +/* + * Set BAT 2 to access 0x8000000 so progress messages will work and set BAT 3 + * to 0xf0000000 to access Falcon/Raven or Hawk registers + */ +static __inline__ void pplus_set_bat(void) +{ + /* wait for all outstanding memory accesses to complete */ + mb(); + + /* setup DBATs */ + mtspr(SPRN_DBAT2U, 0x80001ffe); + mtspr(SPRN_DBAT2L, 0x8000002a); + mtspr(SPRN_DBAT3U, 0xf0001ffe); + mtspr(SPRN_DBAT3L, 0xf000002a); + + /* wait for updates */ + mb(); +} + +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + parse_bootinfo(find_bootinfo()); + + /* Map in board regs, etc. */ + pplus_set_bat(); + + isa_io_base = PREP_ISA_IO_BASE; + isa_mem_base = PREP_ISA_MEM_BASE; + pci_dram_offset = PREP_PCI_DRAM_OFFSET; + ISA_DMA_THRESHOLD = 0x00ffffff; + DMA_MODE_READ = 0x44; + DMA_MODE_WRITE = 0x48; + + ppc_md.setup_arch = pplus_setup_arch; + ppc_md.show_cpuinfo = pplus_show_cpuinfo; + ppc_md.irq_canonicalize = pplus_irq_canonicalize; + ppc_md.init_IRQ = pplus_init_IRQ; + /* this gets changed later on if we have an OpenPIC -- Cort */ + ppc_md.get_irq = i8259_irq; + ppc_md.init = pplus_init2; + + ppc_md.restart = pplus_restart; + ppc_md.power_off = pplus_power_off; + ppc_md.halt = pplus_halt; + + TODC_INIT(TODC_TYPE_MK48T59, PREP_NVRAM_AS0, PREP_NVRAM_AS1, + PREP_NVRAM_DATA, 8); + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + ppc_md.calibrate_decr = todc_calibrate_decr; + ppc_md.nvram_read_val = todc_m48txx_read_val; + ppc_md.nvram_write_val = todc_m48txx_write_val; + + ppc_md.find_end_of_memory = pplus_find_end_of_memory; + ppc_md.setup_io_mappings = pplus_map_io; + +#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) + ppc_ide_md.default_irq = pplus_ide_default_irq; + ppc_ide_md.default_io_base = pplus_ide_default_io_base; + ppc_ide_md.ide_init_hwif = pplus_ide_init_hwif_ports; +#endif + +#ifdef CONFIG_SERIAL_TEXT_DEBUG + ppc_md.progress = gen550_progress; +#endif /* CONFIG_SERIAL_TEXT_DEBUG */ +#ifdef CONFIG_KGDB + ppc_md.kgdb_map_scc = gen550_kgdb_map_scc; +#endif +#ifdef CONFIG_SMP + ppc_md.smp_ops = &pplus_smp_ops; +#endif /* CONFIG_SMP */ +} |