diff options
Diffstat (limited to 'arch/ppc/platforms/85xx/mpc85xx_cds_common.c')
| -rw-r--r-- | arch/ppc/platforms/85xx/mpc85xx_cds_common.c | 467 |
1 files changed, 467 insertions, 0 deletions
diff --git a/arch/ppc/platforms/85xx/mpc85xx_cds_common.c b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c new file mode 100644 index 00000000000..6c020d67ad7 --- /dev/null +++ b/arch/ppc/platforms/85xx/mpc85xx_cds_common.c @@ -0,0 +1,467 @@ +/* + * arch/ppc/platform/85xx/mpc85xx_cds_common.c + * + * MPC85xx CDS board specific routines + * + * Maintainer: Kumar Gala <kumar.gala@freescale.com> + * + * Copyright 2004 Freescale Semiconductor, Inc + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/config.h> +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/reboot.h> +#include <linux/pci.h> +#include <linux/kdev_t.h> +#include <linux/major.h> +#include <linux/console.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/seq_file.h> +#include <linux/serial.h> +#include <linux/module.h> +#include <linux/root_dev.h> +#include <linux/initrd.h> +#include <linux/tty.h> +#include <linux/serial_core.h> +#include <linux/fsl_devices.h> + +#include <asm/system.h> +#include <asm/pgtable.h> +#include <asm/page.h> +#include <asm/atomic.h> +#include <asm/time.h> +#include <asm/todc.h> +#include <asm/io.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/open_pic.h> +#include <asm/bootinfo.h> +#include <asm/pci-bridge.h> +#include <asm/mpc85xx.h> +#include <asm/irq.h> +#include <asm/immap_85xx.h> +#include <asm/immap_cpm2.h> +#include <asm/ppc_sys.h> +#include <asm/kgdb.h> + +#include <mm/mmu_decl.h> +#include <syslib/cpm2_pic.h> +#include <syslib/ppc85xx_common.h> +#include <syslib/ppc85xx_setup.h> + + +#ifndef CONFIG_PCI +unsigned long isa_io_base = 0; +unsigned long isa_mem_base = 0; +#endif + +extern unsigned long total_memory; /* in mm/init */ + +unsigned char __res[sizeof (bd_t)]; + +static int cds_pci_slot = 2; +static volatile u8 * cadmus; + +/* Internal interrupts are all Level Sensitive, and Positive Polarity */ + +static u_char mpc85xx_cds_openpic_initsenses[] __initdata = { + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 0: L2 Cache */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 1: ECM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 2: DDR DRAM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 3: LBIU */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 4: DMA 0 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 5: DMA 1 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 6: DMA 2 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 7: DMA 3 */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 8: PCI/PCI-X */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 9: RIO Inbound Port Write Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 10: RIO Doorbell Inbound */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 11: RIO Outbound Message */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 12: RIO Inbound Message */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 13: TSEC 0 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 14: TSEC 0 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 15: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 16: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 17: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 18: TSEC 0 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 19: TSEC 1 Transmit */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 20: TSEC 1 Receive */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 21: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 22: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 23: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 24: TSEC 1 Receive/Transmit Error */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 25: Fast Ethernet */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 26: DUART */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 27: I2C */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 28: Performance Monitor */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 29: Unused */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 30: CPM */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* Internal 31: Unused */ +#if defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 0: PCI1 slot */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 1: PCI1 slot */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI1 slot */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI1 slot */ +#else + 0x0, /* External 0: */ + 0x0, /* External 1: */ + 0x0, /* External 2: */ + 0x0, /* External 3: */ +#endif + 0x0, /* External 4: */ + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */ + 0x0, /* External 6: */ + 0x0, /* External 7: */ + 0x0, /* External 8: */ + 0x0, /* External 9: */ + 0x0, /* External 10: */ +#if defined(CONFIG_85xx_PCI2) && defined(CONFIG_PCI) + (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 11: PCI2 slot 0 */ +#else + 0x0, /* External 11: */ +#endif +}; + +/* ************************************************************************ */ +int +mpc85xx_cds_show_cpuinfo(struct seq_file *m) +{ + uint pvid, svid, phid1; + uint memsize = total_memory; + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + pvid = mfspr(SPRN_PVR); + svid = mfspr(SPRN_SVR); + + seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); + seq_printf(m, "Machine\t\t: CDS - MPC%s (%x)\n", cur_ppc_sys_spec->ppc_sys_name, cadmus[CM_VER]); + seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000); + seq_printf(m, "PVR\t\t: 0x%x\n", pvid); + seq_printf(m, "SVR\t\t: 0x%x\n", svid); + + /* Display cpu Pll setting */ + phid1 = mfspr(SPRN_HID1); + seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); + + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); + + return 0; +} + +#ifdef CONFIG_CPM2 +static void cpm2_cascade(int irq, void *dev_id, struct pt_regs *regs) +{ + while((irq = cpm2_get_irq(regs)) >= 0) + __do_IRQ(irq, regs); +} + +static struct irqaction cpm2_irqaction = { + .handler = cpm2_cascade, + .flags = SA_INTERRUPT, + .mask = CPU_MASK_NONE, + .name = "cpm2_cascade", +}; +#endif /* CONFIG_CPM2 */ + +void __init +mpc85xx_cds_init_IRQ(void) +{ + bd_t *binfo = (bd_t *) __res; + + /* Determine the Physical Address of the OpenPIC regs */ + phys_addr_t OpenPIC_PAddr = binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET; + OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE); + OpenPIC_InitSenses = mpc85xx_cds_openpic_initsenses; + OpenPIC_NumInitSenses = sizeof (mpc85xx_cds_openpic_initsenses); + + /* Skip reserved space and internal sources */ + openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200); + /* Map PIC IRQs 0-11 */ + openpic_set_sources(32, 12, OpenPIC_Addr + 0x10000); + + /* we let openpic interrupts starting from an offset, to + * leave space for cascading interrupts underneath. + */ + openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET); + +#ifdef CONFIG_CPM2 + /* Setup CPM2 PIC */ + cpm2_init_IRQ(); + + setup_irq(MPC85xx_IRQ_CPM, &cpm2_irqaction); +#endif + + return; +} + +#ifdef CONFIG_PCI +/* + * interrupt routing + */ +int +mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) +{ + struct pci_controller *hose = pci_bus_to_hose(dev->bus->number); + + if (!hose->index) + { + /* Handle PCI1 interrupts */ + char pci_irq_table[][4] = + /* + * PCI IDSEL/INTPIN->INTLINE + * A B C D + */ + + /* Note IRQ assignment for slots is based on which slot the elysium is + * in -- in this setup elysium is in slot #2 (this PIRQA as first + * interrupt on slot */ + { + { 0, 1, 2, 3 }, /* 16 - PMC */ + { 3, 0, 0, 0 }, /* 17 P2P (Tsi320) */ + { 0, 1, 2, 3 }, /* 18 - Slot 1 */ + { 1, 2, 3, 0 }, /* 19 - Slot 2 */ + { 2, 3, 0, 1 }, /* 20 - Slot 3 */ + { 3, 0, 1, 2 }, /* 21 - Slot 4 */ + }; + + const long min_idsel = 16, max_idsel = 21, irqs_per_slot = 4; + int i, j; + + for (i = 0; i < 6; i++) + for (j = 0; j < 4; j++) + pci_irq_table[i][j] = + ((pci_irq_table[i][j] + 5 - + cds_pci_slot) & 0x3) + PIRQ0A; + + return PCI_IRQ_TABLE_LOOKUP; + } else { + /* Handle PCI2 interrupts (if we have one) */ + char pci_irq_table[][4] = + { + /* + * We only have one slot and one interrupt + * going to PIRQA - PIRQD */ + { PIRQ1A, PIRQ1A, PIRQ1A, PIRQ1A }, /* 21 - slot 0 */ + }; + + const long min_idsel = 21, max_idsel = 21, irqs_per_slot = 4; + + return PCI_IRQ_TABLE_LOOKUP; + } +} + +#define ARCADIA_HOST_BRIDGE_IDSEL 17 +#define ARCADIA_2ND_BRIDGE_IDSEL 3 + +extern int mpc85xx_pci1_last_busno; + +int +mpc85xx_exclude_device(u_char bus, u_char devfn) +{ + if (bus == 0 && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; +#ifdef CONFIG_85xx_PCI2 + if (mpc85xx_pci1_last_busno) + if (bus == (mpc85xx_pci1_last_busno + 1) && PCI_SLOT(devfn) == 0) + return PCIBIOS_DEVICE_NOT_FOUND; +#endif + /* We explicitly do not go past the Tundra 320 Bridge */ + if (bus == 1) + return PCIBIOS_DEVICE_NOT_FOUND; + if ((bus == 0) && (PCI_SLOT(devfn) == ARCADIA_2ND_BRIDGE_IDSEL)) + return PCIBIOS_DEVICE_NOT_FOUND; + else + return PCIBIOS_SUCCESSFUL; +} +#endif /* CONFIG_PCI */ + +TODC_ALLOC(); + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init +mpc85xx_cds_setup_arch(void) +{ + bd_t *binfo = (bd_t *) __res; + unsigned int freq; + struct gianfar_platform_data *pdata; + + /* get the core frequency */ + freq = binfo->bi_intfreq; + + printk("mpc85xx_cds_setup_arch\n"); + +#ifdef CONFIG_CPM2 + cpm2_reset(); +#endif + + cadmus = ioremap(CADMUS_BASE, CADMUS_SIZE); + cds_pci_slot = ((cadmus[CM_CSR] >> 6) & 0x3) + 1; + printk("CDS Version = %x in PCI slot %d\n", cadmus[CM_VER], cds_pci_slot); + + /* Setup TODC access */ + TODC_INIT(TODC_TYPE_DS1743, + 0, + 0, + ioremap(CDS_RTC_ADDR, CDS_RTC_SIZE), + 8); + + /* Set loops_per_jiffy to a half-way reasonable value, + for use until calibrate_delay gets called. */ + loops_per_jiffy = freq / HZ; + +#ifdef CONFIG_PCI + /* setup PCI host bridges */ + mpc85xx_setup_hose(); +#endif + +#ifdef CONFIG_SERIAL_8250 + mpc85xx_early_serial_map(); +#endif + +#ifdef CONFIG_SERIAL_TEXT_DEBUG + /* Invalidate the entry we stole earlier the serial ports + * should be properly mapped */ + invalidate_tlbcam_entry(NUM_TLBCAMS - 1); +#endif + + /* setup the board related information for the enet controllers */ + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC1); + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 0; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enetaddr, 6); + + pdata = (struct gianfar_platform_data *) ppc_sys_get_pdata(MPC85xx_TSEC2); + pdata->board_flags = FSL_GIANFAR_BRD_HAS_PHY_INTR; + pdata->interruptPHY = MPC85xx_IRQ_EXT5; + pdata->phyid = 1; + /* fixup phy address */ + pdata->phy_reg_addr += binfo->bi_immr_base; + memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6); + + +#ifdef CONFIG_BLK_DEV_INITRD + if (initrd_start) + ROOT_DEV = Root_RAM0; + else +#endif +#ifdef CONFIG_ROOT_NFS + ROOT_DEV = Root_NFS; +#else + ROOT_DEV = Root_HDA1; +#endif +} + +/* ************************************************************************ */ +void __init +platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + /* parse_bootinfo must always be called first */ + parse_bootinfo(find_bootinfo()); + + /* + * If we were passed in a board information, copy it into the + * residual data area. + */ + if (r3) { + memcpy((void *) __res, (void *) (r3 + KERNELBASE), + sizeof (bd_t)); + + } +#ifdef CONFIG_SERIAL_TEXT_DEBUG + { + bd_t *binfo = (bd_t *) __res; + struct uart_port p; + + /* Use the last TLB entry to map CCSRBAR to allow access to DUART regs */ + settlbcam(NUM_TLBCAMS - 1, binfo->bi_immr_base, + binfo->bi_immr_base, MPC85xx_CCSRBAR_SIZE, _PAGE_IO, 0); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART0_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(0, &p); + + memset(&p, 0, sizeof (p)); + p.iotype = SERIAL_IO_MEM; + p.membase = (void *) binfo->bi_immr_base + MPC85xx_UART1_OFFSET; + p.uartclk = binfo->bi_busfreq; + + gen550_init(1, &p); + } +#endif + +#if defined(CONFIG_BLK_DEV_INITRD) + /* + * If the init RAM disk has been configured in, and there's a valid + * starting address for it, set it up. + */ + if (r4) { + initrd_start = r4 + KERNELBASE; + initrd_end = r5 + KERNELBASE; + } +#endif /* CONFIG_BLK_DEV_INITRD */ + + /* Copy the kernel command line arguments to a safe place. */ + + if (r6) { + *(char *) (r7 + KERNELBASE) = 0; + strcpy(cmd_line, (char *) (r6 + KERNELBASE)); + } + + identify_ppc_sys_by_id(mfspr(SPRN_SVR)); + + /* setup the PowerPC module struct */ + ppc_md.setup_arch = mpc85xx_cds_setup_arch; + ppc_md.show_cpuinfo = mpc85xx_cds_show_cpuinfo; + + ppc_md.init_IRQ = mpc85xx_cds_init_IRQ; + ppc_md.get_irq = openpic_get_irq; + + ppc_md.restart = mpc85xx_restart; + ppc_md.power_off = mpc85xx_power_off; + ppc_md.halt = mpc85xx_halt; + + ppc_md.find_end_of_memory = mpc85xx_find_end_of_memory; + + ppc_md.calibrate_decr = mpc85xx_calibrate_decr; + + ppc_md.time_init = todc_time_init; + ppc_md.set_rtc_time = todc_set_rtc_time; + ppc_md.get_rtc_time = todc_get_rtc_time; + + ppc_md.nvram_read_val = todc_direct_read_val; + ppc_md.nvram_write_val = todc_direct_write_val; + +#if defined(CONFIG_SERIAL_8250) && defined(CONFIG_SERIAL_TEXT_DEBUG) + ppc_md.progress = gen550_progress; +#endif /* CONFIG_SERIAL_8250 && CONFIG_SERIAL_TEXT_DEBUG */ + + if (ppc_md.progress) + ppc_md.progress("mpc85xx_cds_init(): exit", 0); + + return; +} |