diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/xparameters/xparameters.h')
| -rw-r--r-- | arch/ppc/platforms/4xx/xparameters/xparameters.h | 104 |
1 files changed, 0 insertions, 104 deletions
diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h deleted file mode 100644 index 650888b00fb..00000000000 --- a/arch/ppc/platforms/4xx/xparameters/xparameters.h +++ /dev/null @@ -1,104 +0,0 @@ -/* - * arch/ppc/platforms/4xx/xparameters/xparameters.h - * - * This file includes the correct xparameters.h for the CONFIG'ed board plus - * fixups to translate board specific XPAR values to a common set of names - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * 2004 (c) MontaVista Software, Inc. This file is licensed under the terms - * of the GNU General Public License version 2. This program is licensed - * "as is" without any warranty of any kind, whether express or implied. - */ - - -#if defined(CONFIG_XILINX_ML300) - #include "xparameters_ml300.h" - #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \ - XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR - #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \ - XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR -#elif defined(CONFIG_XILINX_ML403) - #include "xparameters_ml403.h" - #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \ - XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR - #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \ - XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR -#else - /* Add other board xparameter includes here before the #else */ - #error No xparameters_*.h file included -#endif - -#ifndef SERIAL_PORT_DFNS - /* zImage serial port definitions */ - #define RS_TABLE_SIZE 1 - #define SERIAL_PORT_DFNS { \ - .baud_base = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16, \ - .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID, \ - .flags = ASYNC_BOOT_AUTOCONF, \ - .iomem_base = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3, \ - .iomem_reg_shift = 2, \ - .io_type = SERIAL_IO_MEM, \ - }, -#endif - -/* - * A few reasonable defaults for the #defines which could be missing depending - * on the IP version or variant (e.g. OPB vs PLB) - */ - -#ifndef XPAR_EMAC_0_CAM_EXIST -#define XPAR_EMAC_0_CAM_EXIST 0 -#endif -#ifndef XPAR_EMAC_0_JUMBO_EXIST -#define XPAR_EMAC_0_JUMBO_EXIST 0 -#endif -#ifndef XPAR_EMAC_0_TX_DRE_TYPE -#define XPAR_EMAC_0_TX_DRE_TYPE 0 -#endif -#ifndef XPAR_EMAC_0_RX_DRE_TYPE -#define XPAR_EMAC_0_RX_DRE_TYPE 0 -#endif -#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM -#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0 -#endif -#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM -#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0 -#endif - -#ifndef XPAR_EMAC_1_CAM_EXIST -#define XPAR_EMAC_1_CAM_EXIST 0 -#endif -#ifndef XPAR_EMAC_1_JUMBO_EXIST -#define XPAR_EMAC_1_JUMBO_EXIST 0 -#endif -#ifndef XPAR_EMAC_1_TX_DRE_TYPE -#define XPAR_EMAC_1_TX_DRE_TYPE 0 -#endif -#ifndef XPAR_EMAC_1_RX_DRE_TYPE -#define XPAR_EMAC_1_RX_DRE_TYPE 0 -#endif -#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM -#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0 -#endif -#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM -#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0 -#endif - -#ifndef XPAR_GPIO_0_IS_DUAL -#define XPAR_GPIO_0_IS_DUAL 0 -#endif -#ifndef XPAR_GPIO_1_IS_DUAL -#define XPAR_GPIO_1_IS_DUAL 0 -#endif -#ifndef XPAR_GPIO_2_IS_DUAL -#define XPAR_GPIO_2_IS_DUAL 0 -#endif -#ifndef XPAR_GPIO_3_IS_DUAL -#define XPAR_GPIO_3_IS_DUAL 0 -#endif -#ifndef XPAR_GPIO_4_IS_DUAL -#define XPAR_GPIO_4_IS_DUAL 0 -#endif - |