diff options
Diffstat (limited to 'arch/ppc/platforms/4xx/cpci405.c')
| -rw-r--r-- | arch/ppc/platforms/4xx/cpci405.c | 201 |
1 files changed, 0 insertions, 201 deletions
diff --git a/arch/ppc/platforms/4xx/cpci405.c b/arch/ppc/platforms/4xx/cpci405.c deleted file mode 100644 index 2e7e25dd84c..00000000000 --- a/arch/ppc/platforms/4xx/cpci405.c +++ /dev/null @@ -1,201 +0,0 @@ -/* - * Board setup routines for the esd CPCI-405 cPCI Board. - * - * Copyright 2001-2006 esd electronic system design - hannover germany - * - * Authors: Matthias Fuchs - * matthias.fuchs@esd-electronics.com - * Stefan Roese - * stefan.roese@esd-electronics.com - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/pci.h> -#include <asm/system.h> -#include <asm/pci-bridge.h> -#include <asm/machdep.h> -#include <asm/todc.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/serial_8250.h> -#include <asm/ocp.h> -#include <asm/ibm_ocp_pci.h> -#include <platforms/4xx/ibm405gp.h> - -#ifdef CONFIG_GEN_RTC -void *cpci405_nvram; -#endif - -extern bd_t __res; - -/* - * Some IRQs unique to CPCI-405. - */ -int __init -ppc405_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin) -{ - static char pci_irq_table[][4] = - /* - * PCI IDSEL/INTPIN->INTLINE - * A B C D - */ - { - {28, 29, 30, 27}, /* IDSEL 15 - cPCI slot 8 */ - {29, 30, 27, 28}, /* IDSEL 16 - cPCI slot 7 */ - {30, 27, 28, 29}, /* IDSEL 17 - cPCI slot 6 */ - {27, 28, 29, 30}, /* IDSEL 18 - cPCI slot 5 */ - {28, 29, 30, 27}, /* IDSEL 19 - cPCI slot 4 */ - {29, 30, 27, 28}, /* IDSEL 20 - cPCI slot 3 */ - {30, 27, 28, 29}, /* IDSEL 21 - cPCI slot 2 */ - }; - const long min_idsel = 15, max_idsel = 21, irqs_per_slot = 4; - return PCI_IRQ_TABLE_LOOKUP; -}; - -/* The serial clock for the chip is an internal clock determined by - * different clock speeds/dividers. - * Calculate the proper input baud rate and setup the serial driver. - */ -static void __init -cpci405_early_serial_map(void) -{ - u32 uart_div; - int uart_clock; - struct uart_port port; - - /* Calculate the serial clock input frequency - * - * The uart clock is the cpu frequency (provided in the board info - * structure) divided by the external UART Divisor. - */ - uart_div = ((mfdcr(DCRN_CHCR_BASE) & CHR0_UDIV) >> 1) + 1; - uart_clock = __res.bi_procfreq / uart_div; - - /* Setup serial port access */ - memset(&port, 0, sizeof(port)); -#if defined(CONFIG_UART0_TTYS0) - port.membase = (void*)UART0_IO_BASE; - port.irq = UART0_INT; -#else - port.membase = (void*)UART1_IO_BASE; - port.irq = UART1_INT; -#endif - port.uartclk = uart_clock; - port.regshift = 0; - port.iotype = UPIO_MEM; - port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST; - port.line = 0; - - if (early_serial_setup(&port) != 0) { - printk("Early serial init of port 0 failed\n"); - } -#if defined(CONFIG_UART0_TTYS0) - port.membase = (void*)UART1_IO_BASE; - port.irq = UART1_INT; -#else - port.membase = (void*)UART0_IO_BASE; - port.irq = UART0_INT; -#endif - port.line = 1; - - if (early_serial_setup(&port) != 0) { - printk("Early serial init of port 1 failed\n"); - } -} - -void __init -cpci405_setup_arch(void) -{ - ppc4xx_setup_arch(); - - ibm_ocp_set_emac(0, 0); - - cpci405_early_serial_map(); - -#ifdef CONFIG_GEN_RTC - TODC_INIT(TODC_TYPE_MK48T35, - cpci405_nvram, cpci405_nvram, cpci405_nvram, 8); -#endif -} - -void __init -bios_fixup(struct pci_controller *hose, struct pcil0_regs *pcip) -{ -#ifdef CONFIG_PCI - unsigned int bar_response, bar; - - /* Disable region first */ - out_le32((void *) &(pcip->pmm[0].ma), 0x00000000); - /* PLB starting addr, PCI: 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].la), 0x80000000); - /* PCI start addr, 0x80000000 */ - out_le32((void *) &(pcip->pmm[0].pcila), PPC405_PCI_MEM_BASE); - /* 512MB range of PLB to PCI */ - out_le32((void *) &(pcip->pmm[0].pciha), 0x00000000); - /* Enable no pre-fetch, enable region */ - out_le32((void *) &(pcip->pmm[0].ma), ((0xffffffff - - (PPC405_PCI_UPPER_MEM - - PPC405_PCI_MEM_BASE)) | 0x01)); - - /* Disable region one */ - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[1].la), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[1].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[1].ma), 0x00000000); - out_le32((void *) &(pcip->ptm1ms), 0x00000001); - - /* Disable region two */ - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - out_le32((void *) &(pcip->pmm[2].la), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pcila), 0x00000000); - out_le32((void *) &(pcip->pmm[2].pciha), 0x00000000); - out_le32((void *) &(pcip->pmm[2].ma), 0x00000000); - out_le32((void *) &(pcip->ptm2ms), 0x00000000); - out_le32((void *) &(pcip->ptm2la), 0x00000000); - - /* Zero config bars */ - for (bar = PCI_BASE_ADDRESS_1; bar <= PCI_BASE_ADDRESS_2; bar += 4) { - early_write_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - 0x00000000); - early_read_config_dword(hose, hose->first_busno, - PCI_FUNC(hose->first_busno), bar, - &bar_response); - } -#endif -} - -void __init -cpci405_map_io(void) -{ - ppc4xx_map_io(); - -#ifdef CONFIG_GEN_RTC - cpci405_nvram = ioremap(CPCI405_NVRAM_PADDR, CPCI405_NVRAM_SIZE); -#endif -} - -void __init -platform_init(unsigned long r3, unsigned long r4, unsigned long r5, - unsigned long r6, unsigned long r7) -{ - ppc4xx_init(r3, r4, r5, r6, r7); - - ppc_md.setup_arch = cpci405_setup_arch; - ppc_md.setup_io_mappings = cpci405_map_io; - -#ifdef CONFIG_GEN_RTC - ppc_md.time_init = todc_time_init; - ppc_md.set_rtc_time = todc_set_rtc_time; - ppc_md.get_rtc_time = todc_get_rtc_time; - ppc_md.nvram_read_val = todc_direct_read_val; - ppc_md.nvram_write_val = todc_direct_write_val; -#endif -} |