diff options
Diffstat (limited to 'arch/ppc/boot/simple/rw4/rw4_init.S')
| -rw-r--r-- | arch/ppc/boot/simple/rw4/rw4_init.S | 78 |
1 files changed, 0 insertions, 78 deletions
diff --git a/arch/ppc/boot/simple/rw4/rw4_init.S b/arch/ppc/boot/simple/rw4/rw4_init.S deleted file mode 100644 index b1061962e46..00000000000 --- a/arch/ppc/boot/simple/rw4/rw4_init.S +++ /dev/null @@ -1,78 +0,0 @@ -#define VESTA -#include "ppc_40x.h" -# - .align 2 - .text -# -# added by linguohui - .extern initb_ebiu0, initb_config, hdw_init_finish - .extern initb_hsmc0, initb_hsmc1, initb_cache -# end added - .globl HdwInit -# -HdwInit: -# -#-----------------------------------------------------------------------* -# If we are not executing from the FLASH get out * -#-----------------------------------------------------------------------* -# SAW keep this or comment out a la Hawthorne? -# r3 contains NIP when used with Linux -# rlwinm r28, r3, 8, 24, 31 # if MSB == 0xFF -> FLASH address -# cmpwi r28, 0xff -# bne locn01 -# -# -#------------------------------------------------------------------------ -# Init_cpu. Bank registers are setup for the IBM STB. -#------------------------------------------------------------------------ -# -# Setup processor core clock to be driven off chip. This is GPI4 bit -# twenty. Setup Open Drain, Output Select, Three-State Control, and -# Three-State Select registers. -# - - - pb0pesr = 0x054 - pb0pear = 0x056 - - mflr r30 - -#----------------------------------------------------------------------------- -# Vectors will be at 0x1F000000 -# Dummy Machine check handler just does RFI before true handler gets installed -#----------------------------------------------------------------------------- -#if 1 /* xuwentao added*/ -#ifdef SDRAM16MB - lis r10,0x0000 - addi r10,r10,0x0000 -#else - lis r10,0x1F00 - addi r10,r10,0x0000 -#endif - - mtspr evpr,r10 #EVPR: 0x0 or 0x1f000000 depending - isync # on SDRAM memory model used. - - lis r10,0xFFFF # clear PB0_PESR because some - ori r10,r10,0xFFFF # transitions from flash,changed by linguohui - mtdcr pb0pesr,r10 # to load RAM image via RiscWatch - lis r10,0x0000 # cause PB0_PESR machine checks - mtdcr pb0pear,r10 - addis r10,r10,0x0000 # clear the - mtxer r10 # XER just in case... -#endif /* xuwentao*/ - - bl initb_ebiu0 # init EBIU - - bl initb_config # config PPC and board - - - - -#------------------------------------------------------------------------ -# EVPR setup moved to top of this function. -#------------------------------------------------------------------------ -# - mtlr r30 - blr - .end |